X-Git-Url: http://git.ipfire.org/?p=people%2Fms%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fsama5d3_xplained.h;h=3c9f49e426cb361126f6c7e7d512f9c7dd7f4a87;hp=d5588b12414c54c3dadba4d86ecc450223169695;hb=e856bdcfb49291d30b19603fc101bea096c48196;hpb=98d2d5e8c473232dc718763dbec284b7349dcc05 diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index d5588b1241..3c9f49e426 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -10,30 +10,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include - -#define CONFIG_SYS_TEXT_BASE 0x26f00000 - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ - -#define CONFIG_ARCH_CPU_INIT - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_CMD_BOOTZ -#define CONFIG_OF_LIBFDT /* Device Tree support */ - -#define CONFIG_SYS_GENERIC_BOARD - -/* general purpose I/O */ -#define CONFIG_AT91_GPIO +#include "at91-sama5_common.h" /* serial console */ #define CONFIG_ATMEL_USART @@ -51,29 +28,6 @@ */ #define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* No NOR flash */ -#define CONFIG_SYS_NO_FLASH - -/* - * Command line configuration. - */ -#include -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_LOADS -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS @@ -110,32 +64,25 @@ #define CONFIG_MTD_PARTITIONS #define CONFIG_RBTREE #define CONFIG_LZO -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #endif /* Ethernet Hardware */ #define CONFIG_MACB #define CONFIG_RMII -#define CONFIG_NET_MULTI #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_MACB_SEARCH_PHY #define CONFIG_RGMII -#define CONFIG_CMD_MII #define CONFIG_PHYLIB /* MMC */ -#define CONFIG_CMD_MMC #ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC #define CONFIG_GENERIC_ATMEL_MCI #define CONFIG_ATMEL_MCI_8BIT #endif /* USB */ -#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_ATMEL @@ -145,69 +92,22 @@ #define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI #define CONFIG_SYS_USB_OHCI_SLOT_NAME "SAMA5D3 Xplained" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_DOS_PARTITION -#define CONFIG_USB_STORAGE #endif #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) -#define CONFIG_CMD_FAT #define CONFIG_FAT_WRITE -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE #endif #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ #if CONFIG_SYS_USE_NANDFLASH -/* bootstrap + u-boot + env in nandflash */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0xc0000 -#define CONFIG_ENV_OFFSET_REDUND 0x100000 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ - "nand read 0x22000000 0x200000 0x600000;" \ - "bootz 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for nandflash env */ #elif CONFIG_SYS_USE_MMC -/* bootstrap + u-boot + env in sd card */ -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET 0x2000 -#define CONFIG_ENV_SIZE 0x1000 -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91-sama5d3_xplained.dtb; " \ - "fatload mmc 0:1 0x22000000 zImage; " \ - "bootz 0x22000000 - 0x21000000" -#define CONFIG_SYS_MMC_ENV_DEV 0 +/* override the bootcmd, bootargs and other configuration for sd/mmc env */ #else #define CONFIG_ENV_IS_NOWHERE #endif -#ifdef CONFIG_SYS_USE_MMC -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "root=/dev/mmcblk0p2 rw rootwait" -#else -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256K(env),256k(evn_redundent),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" -#endif - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) - /* SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x300000 @@ -217,26 +117,15 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT - #define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 +#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT #elif CONFIG_SYS_USE_NANDFLASH -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 @@ -246,6 +135,7 @@ #define CONFIG_SYS_NAND_OOBSIZE 64 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 +#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #endif