X-Git-Url: http://git.ipfire.org/?p=people%2Fms%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Ftam3517-common.h;h=61c563eb274c945c00774e59376faa78e2b8f75b;hp=a532417e170332201a58d644a9db6a7b5cf535b9;hb=8f2fe0c86c56175dd7d5d0e3bc26bef41f224f03;hpb=9f0f432c0aea1e70959a0c06938459d3175a36b0

diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index a532417e17..61c563eb27 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -23,8 +23,6 @@
 
 #define CONFIG_SYS_TEXT_BASE 0x80008000
 
-#define CONFIG_SYS_CACHELINE_SIZE	64
-
 #define CONFIG_EMIF4	/* The chip has EMIF4 controller */
 
 #include <asm/arch/cpu.h>		/* get chip and board defs */
@@ -91,23 +89,11 @@
 #define CONFIG_OMAP3_GPIO_5
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_OMAP
-#define CONFIG_USB_ULPI
-#define CONFIG_USB_ULPI_VIEWPORT_OMAP
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	25
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-#define CONFIG_USB_STORAGE
 
 /* commands to include */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
-#define CONFIG_CMD_FAT		/* FAT support			*/
-#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC		/* MMC support			*/
 #define CONFIG_CMD_NAND		/* NAND support			*/
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
 #define CONFIG_CMD_EEPROM
 
 #define CONFIG_SYS_NO_FLASH
@@ -135,7 +121,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
@@ -216,27 +201,34 @@
 #define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SPL_NAND_WORKSPACE	0x8f07f000 /* below BSS */
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
 
 #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
-#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
+#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
 
 #define CONFIG_SYS_SPL_MALLOC_START	0x8f000000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 #define CONFIG_SPL_BSS_START_ADDR	0x8f080000 /* end of RAM */
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
+
+/* FAT */
+#define CONFIG_SPL_FS_LOAD_KERNEL_NAME		"uImage"
+#define CONFIG_SPL_FS_LOAD_ARGS_NAME		"args"
+
+/* RAW SD card / eMMC */
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x900	/* address 0x120000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x80	/* address 0x10000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0x80	/* 64KiB */
+
 /* NAND boot config */
 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
@@ -258,7 +250,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
 
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_RBTREE
 #define CONFIG_LZO
@@ -323,7 +314,6 @@
 		"fi;"							\
 		"else echo U-Boot not downloaded..exiting;fi\0"		\
 
-
 /*
  * this is common code for all TAM3517 boards.
  * MAC address is stored from manufacturer in