X-Git-Url: http://git.ipfire.org/?p=people%2Fms%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Funiphier.h;h=ee86663e6bfaa2736458d3e29490bbc56086ecf4;hp=4ebaf841ecbc6ffd89c756638bfe5092abcf804d;hb=3788b451e32bc925c4a63a882acc9c3b4ee895be;hpb=68f7289b4ff6daf8c7e9898d5f0eb8f0aaad7bba

diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 4ebaf841ec..ee86663e6b 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -1,5 +1,7 @@
 /*
- * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2012-2015 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -9,14 +11,9 @@
 #ifndef __CONFIG_UNIPHIER_COMMON_H__
 #define __CONFIG_UNIPHIER_COMMON_H__
 
-#define CONFIG_I2C_EEPROM
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
-
-#define CONFIG_SMC911X
+#define CONFIG_ARMV7_PSCI_1_0
 
-/* dummy: referenced by examples/standalone/smc911x_eeprom.c */
-#define CONFIG_SMC911X_BASE	0
-#define CONFIG_SMC911X_32_BIT
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
 
 /*-----------------------------------------------------------------------
  * MMU and Cache Setting
@@ -26,18 +23,6 @@
 /* #define CONFIG_SYS_ICACHE_OFF */
 /* #define CONFIG_SYS_DCACHE_OFF */
 
-#define CONFIG_SYS_CACHELINE_SIZE	32
-
-/* Comment out the following to disable L2 cache */
-#define CONFIG_UNIPHIER_L2CACHE_ON
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_MISC_INIT_F
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 
 #define CONFIG_TIMESTAMP
@@ -45,10 +30,15 @@
 /* FLASH related */
 #define CONFIG_MTD_DEVICE
 
-/*
- * uncomment the following to disable FLASH related code.
- */
-/* #define CONFIG_SYS_NO_FLASH */
+#define CONFIG_SMC911X_32_BIT
+/* dummy: referenced by examples/standalone/smc911x_eeprom.c */
+#define CONFIG_SMC911X_BASE	0
+
+#ifdef CONFIG_MICRO_SUPPORT_CARD
+#define CONFIG_SMC911X
+#else
+#define CONFIG_SYS_NO_FLASH
+#endif
 
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
@@ -59,7 +49,7 @@
 #define CONFIG_SYS_FLASH_BASE		0
 
 /*
- * flash_toggle does not work for out supoort card.
+ * flash_toggle does not work for our support card.
  * We need to use flash_status_poll.
  */
 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
@@ -71,11 +61,6 @@
 /* serial console configuration */
 #define CONFIG_BAUDRATE			115200
 
-#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64)
-#define CONFIG_USE_ARCH_MEMSET
-#define CONFIG_USE_ARCH_MEMCPY
-#endif
-
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
 #define CONFIG_CMDLINE_EDITING		/* add command line history	*/
@@ -134,7 +119,6 @@
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS			0
 
 /* USB */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT		2
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	4
 #define CONFIG_FAT_WRITE
 #define CONFIG_DOS_PARTITION
@@ -184,7 +168,6 @@
 	"__nfsboot=run tftpboot\0"
 #else
 #ifdef CONFIG_ARM64
-#define CONFIG_CMD_BOOTI
 #define CONFIG_BOOTFILE			"Image"
 #define LINUXBOOT_CMD			"booti"
 #define KERNEL_ADDR_R			"kernel_addr_r=0x80080000\0"
@@ -225,7 +208,6 @@
 		"tftpboot $fdt_addr_r $fdt_file &&" \
 		"run boot_common\0" \
 	"__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \
-		"tftpboot $fdt_addr_r $fdt_file &&" \
 		"tftpboot $fdt_addr_r $fdt_file &&" \
 		"setenv ramdisk_addr_r - &&" \
 		"run boot_common\0"
@@ -281,25 +263,16 @@
 #define CONFIG_PANIC_HANG
 
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NOR_SUPPORT
 #ifdef CONFIG_ARM64
 #define CONFIG_SPL_BOARD_LOAD_IMAGE
-#else
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
 #endif
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT	/* for mem_malloc_init */
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 
 #define CONFIG_SYS_NAND_U_BOOT_OFFS		0x10000
 
 /* subtract sizeof(struct image_header) */
 #define CONFIG_SYS_UBOOT_BASE			(0x60000 - 0x40)
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x80
 
 #define CONFIG_SPL_TARGET			"u-boot-with-spl.bin"
 #define CONFIG_SPL_MAX_FOOTPRINT		0x10000