+++ /dev/null
-/*
- * (C) Copyright 2010
- * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Note: RAMTRON SPI FRAMs are ferroelectric, nonvolatile RAMs
- * with an interface identical to SPI flash devices.
- * However since they behave like RAM there are no delays or
- * busy polls required. They can sustain read or write at the
- * allowed SPI bus speed, which can be 40 MHz for some devices.
- *
- * Unfortunately some RAMTRON devices do not have a means of
- * identifying them. They will leave the SO line undriven when
- * the READ-ID command is issued. It is therefore mandatory
- * that the MISO line has a proper pull-up, so that READ-ID
- * will return a row of 0xff. This 0xff pseudo-id will cause
- * probes by all vendor specific functions that are designed
- * to handle it. If the MISO line is not pulled up, READ-ID
- * could return any random noise, even mimicking another
- * device.
- *
- * We use CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
- * to define which device will be assumed after a simple status
- * register verify. This method is prone to false positive
- * detection and should therefore be the last to be tried.
- * Enter it in the last position in the table in spi_flash.c!
- *
- * The define CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC both activates
- * compilation of the special handler and defines the device
- * to assume.
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <spi.h>
-#include <spi_flash.h>
-#include "sf_internal.h"
-
-/*
- * Properties of supported FRAMs
- * Note: speed is currently not used because we have no method to deliver that
- * value to the upper layers
- */
-struct ramtron_spi_fram_params {
- u32 size; /* size in bytes */
- u8 addr_len; /* number of address bytes */
- u8 merge_cmd; /* some address bits are in the command byte */
- u8 id1; /* device ID 1 (family, density) */
- u8 id2; /* device ID 2 (sub, rev, rsvd) */
- u32 speed; /* max. SPI clock in Hz */
- const char *name; /* name for display and/or matching */
-};
-
-struct ramtron_spi_fram {
- struct spi_flash flash;
- const struct ramtron_spi_fram_params *params;
-};
-
-static inline struct ramtron_spi_fram *to_ramtron_spi_fram(struct spi_flash
- *flash)
-{
- return container_of(flash, struct ramtron_spi_fram, flash);
-}
-
-/*
- * table describing supported FRAM chips:
- * chips without RDID command must have the values 0xff for id1 and id2
- */
-static const struct ramtron_spi_fram_params ramtron_spi_fram_table[] = {
- {
- .size = 32*1024,
- .addr_len = 2,
- .merge_cmd = 0,
- .id1 = 0x22,
- .id2 = 0x00,
- .speed = 40000000,
- .name = "FM25V02",
- },
- {
- .size = 32*1024,
- .addr_len = 2,
- .merge_cmd = 0,
- .id1 = 0x22,
- .id2 = 0x01,
- .speed = 40000000,
- .name = "FM25VN02",
- },
- {
- .size = 64*1024,
- .addr_len = 2,
- .merge_cmd = 0,
- .id1 = 0x23,
- .id2 = 0x00,
- .speed = 40000000,
- .name = "FM25V05",
- },
- {
- .size = 64*1024,
- .addr_len = 2,
- .merge_cmd = 0,
- .id1 = 0x23,
- .id2 = 0x01,
- .speed = 40000000,
- .name = "FM25VN05",
- },
- {
- .size = 128*1024,
- .addr_len = 3,
- .merge_cmd = 0,
- .id1 = 0x24,
- .id2 = 0x00,
- .speed = 40000000,
- .name = "FM25V10",
- },
- {
- .size = 128*1024,
- .addr_len = 3,
- .merge_cmd = 0,
- .id1 = 0x24,
- .id2 = 0x01,
- .speed = 40000000,
- .name = "FM25VN10",
- },
-#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
- {
- .size = 256*1024,
- .addr_len = 3,
- .merge_cmd = 0,
- .id1 = 0xff,
- .id2 = 0xff,
- .speed = 40000000,
- .name = "FM25H20",
- },
-#endif
-};
-
-static int ramtron_common(struct spi_flash *flash,
- u32 offset, size_t len, void *buf, u8 command)
-{
- struct ramtron_spi_fram *sn = to_ramtron_spi_fram(flash);
- u8 cmd[4];
- int cmd_len;
- int ret;
-
- if (sn->params->addr_len == 3 && sn->params->merge_cmd == 0) {
- cmd[0] = command;
- cmd[1] = offset >> 16;
- cmd[2] = offset >> 8;
- cmd[3] = offset;
- cmd_len = 4;
- } else if (sn->params->addr_len == 2 && sn->params->merge_cmd == 0) {
- cmd[0] = command;
- cmd[1] = offset >> 8;
- cmd[2] = offset;
- cmd_len = 3;
- } else {
- printf("SF: unsupported addr_len or merge_cmd\n");
- return -1;
- }
-
- /* claim the bus */
- ret = spi_claim_bus(flash->spi);
- if (ret) {
- debug("SF: Unable to claim SPI bus\n");
- return ret;
- }
-
- if (command == CMD_PAGE_PROGRAM) {
- /* send WREN */
- ret = spi_flash_cmd_write_enable(flash);
- if (ret < 0) {
- debug("SF: Enabling Write failed\n");
- goto releasebus;
- }
- }
-
- /* do the transaction */
- if (command == CMD_PAGE_PROGRAM)
- ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len, buf, len);
- else
- ret = spi_flash_cmd_read(flash->spi, cmd, cmd_len, buf, len);
- if (ret < 0)
- debug("SF: Transaction failed\n");
-
-releasebus:
- /* release the bus */
- spi_release_bus(flash->spi);
- return ret;
-}
-
-static int ramtron_read(struct spi_flash *flash,
- u32 offset, size_t len, void *buf)
-{
- return ramtron_common(flash, offset, len, buf,
- CMD_READ_ARRAY_SLOW);
-}
-
-static int ramtron_write(struct spi_flash *flash,
- u32 offset, size_t len, const void *buf)
-{
- return ramtron_common(flash, offset, len, (void *)buf,
- CMD_PAGE_PROGRAM);
-}
-
-static int ramtron_erase(struct spi_flash *flash, u32 offset, size_t len)
-{
- debug("SF: Erase of RAMTRON FRAMs is pointless\n");
- return -1;
-}
-
-/*
- * nore: we are called here with idcode pointing to the first non-0x7f byte
- * already!
- */
-static struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi,
- u8 *idcode)
-{
- const struct ramtron_spi_fram_params *params;
- struct ramtron_spi_fram *sn;
- unsigned int i;
-#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
- int ret;
- u8 sr;
-#endif
-
- /* NOTE: the bus has been claimed before this function is called! */
- switch (idcode[0]) {
- case 0xc2:
- /* JEDEC conformant RAMTRON id */
- for (i = 0; i < ARRAY_SIZE(ramtron_spi_fram_table); i++) {
- params = &ramtron_spi_fram_table[i];
- if (idcode[1] == params->id1 &&
- idcode[2] == params->id2)
- goto found;
- }
- break;
-#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
- case 0xff:
- /*
- * probably open MISO line, pulled up.
- * We COULD have a non JEDEC conformant FRAM here,
- * read the status register to verify
- */
- ret = spi_flash_cmd(spi, CMD_READ_STATUS, &sr, 1);
- if (ret)
- return NULL;
-
- /* Bits 5,4,0 are fixed 0 for all devices */
- if ((sr & 0x31) != 0x00)
- return NULL;
- /* now find the device */
- for (i = 0; i < ARRAY_SIZE(ramtron_spi_fram_table); i++) {
- params = &ramtron_spi_fram_table[i];
- if (!strcmp(params->name,
- CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC))
- goto found;
- }
- debug("SF: Unsupported non-JEDEC RAMTRON device "
- CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC "\n");
- break;
-#endif
- default:
- break;
- }
-
- /* arriving here means no method has found a device we can handle */
- debug("SF/ramtron: unsupported device id0=%02x id1=%02x id2=%02x\n",
- idcode[0], idcode[1], idcode[2]);
- return NULL;
-
-found:
- sn = malloc(sizeof(*sn));
- if (!sn) {
- debug("SF: Failed to allocate memory\n");
- return NULL;
- }
-
- sn->params = params;
-
- sn->flash.write = ramtron_write;
- sn->flash.read = ramtron_read;
- sn->flash.erase = ramtron_erase;
- sn->flash.size = params->size;
-
- return &sn->flash;
-}
-
-/*
- * The following table holds all device probe functions
- * (All flashes are removed and implemented a common probe at
- * spi_flash_probe.c)
- *
- * shift: number of continuation bytes before the ID
- * idcode: the expected IDCODE or 0xff for non JEDEC devices
- * probe: the function to call
- *
- * Non JEDEC devices should be ordered in the table such that
- * the probe functions with best detection algorithms come first.
- *
- * Several matching entries are permitted, they will be tried
- * in sequence until a probe function returns non NULL.
- *
- * IDCODE_CONT_LEN may be redefined if a device needs to declare a
- * larger "shift" value. IDCODE_PART_LEN generally shouldn't be
- * changed. This is the max number of bytes probe functions may
- * examine when looking up part-specific identification info.
- *
- * Probe functions will be given the idcode buffer starting at their
- * manu id byte (the "idcode" in the table below). In other words,
- * all of the continuation bytes will be skipped (the "shift" below).
- */
-#define IDCODE_CONT_LEN 0
-#define IDCODE_PART_LEN 5
-static const struct {
- const u8 shift;
- const u8 idcode;
- struct spi_flash *(*probe) (struct spi_slave *spi, u8 *idcode);
-} flashes[] = {
- /* Keep it sorted by define name */
-#ifdef CONFIG_SPI_FRAM_RAMTRON
- { 6, 0xc2, spi_fram_probe_ramtron, },
-# undef IDCODE_CONT_LEN
-# define IDCODE_CONT_LEN 6
-#endif
-#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
- { 0, 0xff, spi_fram_probe_ramtron, },
-#endif
-};
-#define IDCODE_LEN (IDCODE_CONT_LEN + IDCODE_PART_LEN)
-
-struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int spi_mode)
-{
- struct spi_slave *spi;
- struct spi_flash *flash = NULL;
- int ret, i, shift;
- u8 idcode[IDCODE_LEN], *idp;
-
- spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
- if (!spi) {
- printf("SF: Failed to set up slave\n");
- return NULL;
- }
-
- ret = spi_claim_bus(spi);
- if (ret) {
- debug("SF: Failed to claim SPI bus: %d\n", ret);
- goto err_claim_bus;
- }
-
- /* Read the ID codes */
- ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
- if (ret)
- goto err_read_id;
-
-#ifdef DEBUG
- printf("SF: Got idcodes\n");
- print_buffer(0, idcode, 1, sizeof(idcode), 0);
-#endif
-
- /* count the number of continuation bytes */
- for (shift = 0, idp = idcode;
- shift < IDCODE_CONT_LEN && *idp == 0x7f;
- ++shift, ++idp)
- continue;
-
- /* search the table for matches in shift and id */
- for (i = 0; i < ARRAY_SIZE(flashes); ++i)
- if (flashes[i].shift == shift && flashes[i].idcode == *idp) {
- /* we have a match, call probe */
- flash = flashes[i].probe(spi, idp);
- if (flash)
- break;
- }
-
- if (!flash) {
- printf("SF: Unsupported manufacturer %02x\n", *idp);
- goto err_manufacturer_probe;
- }
-
- printf("SF: Detected %s with total size ", flash->name);
- print_size(flash->size, "");
- puts("\n");
-
- spi_release_bus(spi);
-
- return flash;
-
-err_manufacturer_probe:
-err_read_id:
- spi_release_bus(spi);
-err_claim_bus:
- spi_free_slave(spi);
- return NULL;
-}
-
-void spi_flash_free(struct spi_flash *flash)
-{
- spi_free_slave(flash->spi);
- free(flash);
-}
projects / people / ms / u-boot.git / commitdiff
