From: Sergey Matyukevich Date: Wed, 9 Jun 2010 19:09:06 +0000 (+0400) Subject: USB OHCI support for at91sam9g45 SoC X-Git-Url: http://git.ipfire.org/?p=people%2Fms%2Fu-boot.git;a=commitdiff_plain;h=64203c7b0f4568e5ece9fc1b25f763bed88d10b8 USB OHCI support for at91sam9g45 SoC Add USB OHCI support for at91sam9g45ekes/at91sam9m10g45ek boards. Note that according to errata from Atmel, OHCI is not operational on the first revision of at91sam9g45 chip. So this patch enables OHCI support for later revisions. Signed-off-by: Sergey Matyukevich --- diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/include/asm/arch-at91/at91_pmc.h index 5b1a85d051..2f9ad96003 100644 --- a/arch/arm/include/asm/arch-at91/at91_pmc.h +++ b/arch/arm/include/asm/arch-at91/at91_pmc.h @@ -35,13 +35,15 @@ typedef struct at91_pmc { u32 pcer; /* 0x10 Peripheral Clock Enable Register */ u32 pcdr; /* 0x14 Peripheral Clock Disable Register */ u32 pcsr; /* 0x18 Peripheral Clock Status Register */ - u32 reserved1; + u32 uckr; /* 0x1C UTMI Clock Register */ u32 mor; /* 0x20 Main Oscilator Register */ u32 mcfr; /* 0x24 Main Clock Frequency Register */ u32 pllar; /* 0x28 PLL A Register */ u32 pllbr; /* 0x2C PLL B Register */ u32 mckr; /* 0x30 Master Clock Register */ - u32 reserved2[3]; + u32 reserved1; + u32 usb; /* 0x38 USB Clock Register */ + u32 reserved2; u32 pck[4]; /* 0x40 Programmable Clock Register 0 - 3 */ u32 reserved3[4]; u32 ier; /* 0x60 Interrupt Enable Register */ @@ -198,6 +200,14 @@ typedef struct at91_pmc { #define AT91_PMC_PDIV_1 (0 << 12) #define AT91_PMC_PDIV_2 (1 << 12) +#ifdef CONFIG_AT91_LEGACY +#define AT91_PMC_USB (AT91_PMC + 0x38) /* USB Clock Register */ +#endif +#define AT91_PMC_USBS_USB_PLLA (0x0) /* USB Clock Input is PLLA */ +#define AT91_PMC_USBS_USB_UPLL (0x1) /* USB Clock Input is UPLL */ +#define AT91_PMC_USBDIV_8 (0x7 << 8) /* USB Clock divided by 8 */ +#define AT91_PMC_USBDIV_10 (0x9 << 8) /* USB Clock divided by 10 */ + #ifdef CONFIG_AT91_LEGACY #define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c index edfb627bbc..8fa0449070 100644 --- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c +++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c @@ -87,6 +87,16 @@ static void at91sam9m10g45ek_nand_hw_init(void) } #endif +#ifdef CONFIG_CMD_USB +static void at91sam9m10g45ek_usb_hw_init(void) +{ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE); + + at91_set_gpio_output(AT91_PIN_PD1, 0); + at91_set_gpio_output(AT91_PIN_PD3, 0); +} +#endif + #ifdef CONFIG_MACB static void at91sam9m10g45ek_macb_hw_init(void) { @@ -251,6 +261,9 @@ int board_init(void) #ifdef CONFIG_CMD_NAND at91sam9m10g45ek_nand_hw_init(); #endif +#ifdef CONFIG_CMD_USB + at91sam9m10g45ek_usb_hw_init(); +#endif #ifdef CONFIG_HAS_DATAFLASH at91_spi0_hw_init(1 << 0); #endif diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index b2e03bc58b..64fde68ff5 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -41,6 +41,15 @@ int usb_cpu_init(void) writel(get_pllb_init(), &pmc->pllbr); while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) ; +#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) + /* Enable UPLL */ + writel(readl(&pmc->uckr) | AT91_PMC_UPLLEN | AT91_PMC_BIASEN, + &pmc->uckr); + while ((readl(&pmc->sr) & AT91_PMC_LOCKU) != AT91_PMC_LOCKU) + ; + + /* Select PLLA as input clock of OHCI */ + writel(AT91_PMC_USBS_USB_UPLL | AT91_PMC_USBDIV_10, &pmc->usb); #endif /* Enable USB host clock. */ @@ -72,6 +81,11 @@ int usb_cpu_stop(void) writel(0, &pmc->pllbr); while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0) ; +#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) + /* Disable UPLL */ + writel(readl(&pmc->uckr) & (~AT91_PMC_UPLLEN), &pmc->uckr); + while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU) + ; #endif return 0;