From: SRICHARAN R Date: Wed, 16 May 2012 23:52:54 +0000 (+0000) Subject: ARM: cache: Move the cp15 CR register read before flushing the cache. X-Git-Url: http://git.ipfire.org/?p=people%2Fms%2Fu-boot.git;a=commitdiff_plain;h=d702b0811df53a1fc2d8049e35431e4591d093c6 ARM: cache: Move the cp15 CR register read before flushing the cache. The following is the cleanup sequence in arch/arm/cpu/armv7/cpu.c int cleanup_before_linux(void) { ... ... dcache_disable(); v7_outer_cache_disable(); invalidate_dcache_all(); } 1) invalidate_dcache_all call expects that all the caches has been flushed, invalidated and there are no dirty entries prior to its execution. In the above sequence dcache_disable() flushes, invalidates the caches and turns off the mmu. But after it cleanups the cache and before the mmu is disabled there is a cp_delay() function which has STR instruction. On certain cores like the cortex-a15, cache hit and a write can happen to a cache line even when the dcache is disabled. So the above mentioned STR instruction creates a dirty entry after cleaning. The mmu gets disabled after this. 2) invalidate_dcache_all invalidates the cache lines. Again on cores like cortex-a15, invalidate instruction flushes the dirty line as well. So some times the dirty line from sequence 1 can corrupt the memory resulting in a crash. Fixing this by moving the get_cr() and cp_delay() calls before cleaning up the cache, thus avoiding the dirty entry. Signed-off-by: R Sricharan --- diff --git a/arch/arm/lib/cache-cp15.c b/arch/arm/lib/cache-cp15.c index e6c3eae6f9..939de10e03 100644 --- a/arch/arm/lib/cache-cp15.c +++ b/arch/arm/lib/cache-cp15.c @@ -115,17 +115,17 @@ static void cache_disable(uint32_t cache_bit) { uint32_t reg; + reg = get_cr(); + cp_delay(); + if (cache_bit == CR_C) { /* if cache isn;t enabled no need to disable */ - reg = get_cr(); if ((reg & CR_C) != CR_C) return; /* if disabling data cache, disable mmu too */ cache_bit |= CR_M; flush_dcache_all(); } - reg = get_cr(); - cp_delay(); set_cr(reg & ~cache_bit); } #endif