From 4166ba3b2351aa72c372f66a54e9fb92cffbd230 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 14 Dec 2015 16:55:10 +0100 Subject: [PATCH] serial: uartlite: Add support for debug console Add support for debug console. Signed-off-by: Michal Simek Reviewed-by: Thomas Chou --- drivers/serial/Kconfig | 7 +++++++ drivers/serial/serial_xuartlite.c | 26 ++++++++++++++++++++++++++ 2 files changed, 33 insertions(+) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 83068cfd50..e78c5d3479 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -112,6 +112,13 @@ config DEBUG_UART_S5P will need to provide parameters to make this work. The driver will be available until the real driver-model serial is running. +config DEBUG_UART_UARTLITE + bool "Xilinx Uartlite" + help + Select this to enable a debug UART using the serial_uartlite driver. + You will need to provide parameters to make this work. The driver will + be available until the real driver-model serial is running. + config DEBUG_UART_ZYNQ bool "Xilinx Zynq" help diff --git a/drivers/serial/serial_xuartlite.c b/drivers/serial/serial_xuartlite.c index 157e14dedc..a2e9303925 100644 --- a/drivers/serial/serial_xuartlite.c +++ b/drivers/serial/serial_xuartlite.c @@ -114,3 +114,29 @@ U_BOOT_DRIVER(serial_uartlite) = { .ops = &uartlite_serial_ops, .flags = DM_FLAG_PRE_RELOC, }; + +#ifdef CONFIG_DEBUG_UART_UARTLITE + +#include + +static inline void _debug_uart_init(void) +{ + struct uartlite *regs = (struct uartlite *)CONFIG_DEBUG_UART_BASE; + + out_be32(®s->control, 0); + out_be32(®s->control, ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX); + in_be32(®s->control); +} + +static inline void _debug_uart_putc(int ch) +{ + struct uartlite *regs = (struct uartlite *)CONFIG_DEBUG_UART_BASE; + + while (in_be32(®s->status) & SR_TX_FIFO_FULL) + ; + + out_be32(®s->tx_fifo, ch & 0xff); +} + +DEBUG_UART_FUNCS +#endif -- 2.39.2