From bc5dbcb91813a429d168de58b37cb5b291d7be75 Mon Sep 17 00:00:00 2001 From: "B, Ravi" Date: Thu, 28 Jul 2016 17:39:14 +0530 Subject: [PATCH] spl: dfu: add dfu support in SPL Traditionally the DFU support is available only as part 2nd stage boot loader(u-boot) and DFU is not supported in SPL. The SPL-DFU feature is useful for boards which does not have MMC/SD, ethernet boot mechanism to boot the board and only has USB inteface. This patch add DFU support in SPL with RAM memory device support to load and execute u-boot. And then leverage full functionality DFU in u-boot to flash boot inital binary images to factory or bare-metal boards to memory devices like SPI, eMMC, MMC/SD card using USB interface. This SPL-DFU support can be enabled through Menuconfig->Boot Images->Enable SPL-DFU support Signed-off-by: Ravi Babu Reviewed-by: Tom Rini --- Kconfig | 27 +++++++++++++++++++++++++++ common/Makefile | 1 + scripts/Makefile.spl | 4 ++++ 3 files changed, 32 insertions(+) diff --git a/Kconfig b/Kconfig index a759e4da27..1263d0b612 100644 --- a/Kconfig +++ b/Kconfig @@ -291,6 +291,33 @@ config FIT_IMAGE_POST_PROCESS injected into the FIT creation (i.e. the blobs would have been pre- processed before being added to the FIT image). +config SPL_DFU_SUPPORT + bool "Enable SPL with DFU to load binaries to memory device" + depends on USB + help + Currently the SPL does not have capability to load the + binaries or boot images to boot devices like ram,eMMC,SPI,etc. + This feature enables the DFU (Device Firmware Upgarde) in SPL with + RAM memory device support. The ROM code will load and execute + the SPL built with dfu. The user can load binaries (u-boot/kernel) to + selected device partition from host-pc using dfu-utils. + This feature will be useful to flash the binaries to factory + or bare-metal boards using USB interface. + +choice + bool "DFU device selection" + depends on SPL_DFU_SUPPORT + +config SPL_DFU_RAM + bool "RAM device" + depends on SPL_DFU_SUPPORT + help + select RAM/DDR memory device for loading binary images + (u-boot/kernel) to the selected device partition using + DFU and execute the u-boot/kernel from RAM. + +endchoice + config SYS_CLK_FREQ depends on ARC || ARCH_SUNXI int "CPU clock frequency" diff --git a/common/Makefile b/common/Makefile index 9a9a065ad2..6b4456edff 100644 --- a/common/Makefile +++ b/common/Makefile @@ -89,6 +89,7 @@ obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o endif # !CONFIG_SPL_BUILD ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_SPL_DFU_SUPPORT) += cli_hush.o obj-$(CONFIG_SPL_HASH_SUPPORT) += hash.o obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o obj-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index 5a7f79c25a..4febc6b401 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -66,6 +66,10 @@ endif libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/ libs-y += drivers/ +libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/dfu/ +libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/gadget/ +libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/gadget/udc/ +libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/dwc3/ libs-y += dts/ libs-y += fs/ libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/ -- 2.39.2