projects / people / pmueller / ipfire-2.x.git / blame
| Commit | Line | Data |
|---|---|---|
| 7e6be0de AF |
1 | # bcm43362 NVRAM file for LeMaker Banana Pro and Cubietruck |
| 2 | #AP6210_NVRAM_V1.2_03192013 | |
| 3 | ||
| 4 | manfid=0x2d0 | |
| 5 | prodid=0x492 | |
| 6 | vendid=0x14e4 | |
| 7 | devid=0x4343 | |
| 8 | boardtype=0x0598 | |
| 9 | ||
| 10 | # Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same | |
| 11 | #Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305 | |
| 12 | boardrev=0x1307 | |
| 13 | boardnum=777 | |
| 14 | xtalfreq=26000 | |
| 15 | boardflags=0x80201 | |
| 16 | boardflags2=0x80 | |
| 17 | sromrev=3 | |
| 18 | wl0id=0x431b | |
| 19 | macaddr=DE:AD:BE:EF:00:00 | |
| 20 | aa2g=1 | |
| 21 | ag0=2 | |
| 22 | maxp2ga0=74 | |
| 23 | cck2gpo=0x2222 | |
| 24 | ofdm2gpo=0x44444444 | |
| 25 | mcs2gpo0=0x6666 | |
| 26 | mcs2gpo1=0x6666 | |
| 27 | pa0maxpwr=56 | |
| 28 | ||
| 29 | #P207 PA params | |
| 30 | #pa0b0=5447 | |
| 31 | #pa0b1=-658 | |
| 32 | #pa0b2=-175<div></div> | |
| 33 | ||
| 34 | #Same PA params for P304,P305, P306, P307 | |
| 35 | ||
| 36 | pa0b0=5447 | |
| 37 | pa0b1=-607 | |
| 38 | pa0b2=-160 | |
| 39 | pa0itssit=62 | |
| 40 | pa1itssit=62 | |
| 41 | ||
| 42 | ||
| 43 | cckPwrOffset=5 | |
| 44 | ccode=0 | |
| 45 | rssismf2g=0xa | |
| 46 | rssismc2g=0x3 | |
| 47 | rssisav2g=0x7 | |
| 48 | triso2g=0 | |
| 49 | noise_cal_enable_2g=0 | |
| 50 | noise_cal_po_2g=0 | |
| 51 | swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff | |
| 52 | temp_add=29767 | |
| 53 | temp_mult=425 | |
| 54 | ||
| 55 | btc_flags=0x6 | |
| 56 | btc_params0=5000 | |
| 57 | btc_params1=1000 | |
| 58 | btc_params6=63 |