config/lib/firmware/brcm/brcmfmac4329-sdio.txt

   1 # bcm4329 NVRAM file for Wandboard Dual
   2
   3 sromrev=3
   4 vendid=0x14e4
   5 devid=0x432f
   6 boardtype=0x53e
   7
   8 boardrev=0x41
   9
  10 #boardflags=0x1200
  11 boardflags=0x200
  12
  13 # Specify the xtalfreq if it is otherthan 38.4MHz
  14 xtalfreq=37400
  15
  16 aa2g=3
  17 aa5g=0
  18
  19 ag0=255
  20 #tri2g=0x64
  21
  22 # 11g paparams
  23 pa0b0=5542,5542,5542
  24 pa0b1=64244,64244,64244
  25 pa0b2=65202,65202,65202
  26
  27 pa0itssit=62
  28 pa0maxpwr=74
  29 opo=0
  30 mcs2gpo0=0x6666
  31 mcs2gpo1=0x6666
  32
  33 # 11g rssi params
  34 rssismf2g=0xa,0xa,0xa
  35 rssismc2g=0xb,0xb,0xb
  36 rssisav2g=0x3,0x3,0x3
  37 bxa2g=0
  38
  39 # country code
  40 ccode=ALL
  41 cctl=0x0
  42 cckdigfilttype=0
  43 ofdmdigfilttype=1
  44
  45 rxpo2g=0
  46
  47 boardnum=1
  48 macaddr=DE:AD:BE:EF:00:00
  49
  50 # xtal pu and pd time control variable
  51 # pu time is driver default (0x1501)
  52 #r13t=0x1501
  53
  54 #######
  55 nocrc=1
  56
  57 #for mfgc
  58 otpimagesize=182
  59
  60 # sdio extra configs
  61 hwhdr=0x05ffff031030031003100000
  62
  63 #This generates empty F1, F2 and F3 tuple chains, and may be used if the host SDIO stack does not require the standard tuples.
  64 #RAW1=80 02 fe ff
  65
  66 #This includes the standard FUNCID and FUNCE tuples in the F1, F2, F3 and common CIS.
  67 RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A
  68 nvramver=4.218.214.0