coreutils: Update to 8.30
[people/pmueller/ipfire-2.x.git] / config / lib / firmware / brcm / brcmfmac43362-sdio.txt
1 # bcm43362 NVRAM file for LeMaker Banana Pro and Cubietruck
2 #AP6210_NVRAM_V1.2_03192013
3
4 manfid=0x2d0
5 prodid=0x492
6 vendid=0x14e4
7 devid=0x4343
8 boardtype=0x0598
9
10 # Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same
11 #Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
12 boardrev=0x1307
13 boardnum=777
14 xtalfreq=26000
15 boardflags=0x80201
16 boardflags2=0x80
17 sromrev=3
18 wl0id=0x431b
19 macaddr=DE:AD:BE:EF:00:00
20 aa2g=1
21 ag0=2
22 maxp2ga0=74
23 cck2gpo=0x2222
24 ofdm2gpo=0x44444444
25 mcs2gpo0=0x6666
26 mcs2gpo1=0x6666
27 pa0maxpwr=56
28
29 #P207 PA params
30 #pa0b0=5447
31 #pa0b1=-658
32 #pa0b2=-175<div></div>
33
34 #Same PA params for P304,P305, P306, P307
35
36 pa0b0=5447
37 pa0b1=-607
38 pa0b2=-160
39 pa0itssit=62
40 pa1itssit=62
41
42
43 cckPwrOffset=5
44 ccode=0
45 rssismf2g=0xa
46 rssismc2g=0x3
47 rssisav2g=0x7
48 triso2g=0
49 noise_cal_enable_2g=0
50 noise_cal_po_2g=0
51 swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
52 temp_add=29767
53 temp_mult=425
54
55 btc_flags=0x6
56 btc_params0=5000
57 btc_params1=1000
58 btc_params6=63