config/lib/firmware/brcm/brcmfmac43362-sdio.txt

   1 # bcm43362 NVRAM file for LeMaker Banana Pro and Cubietruck
   2 #AP6210_NVRAM_V1.2_03192013
   3
   4 manfid=0x2d0
   5 prodid=0x492
   6 vendid=0x14e4
   7 devid=0x4343
   8 boardtype=0x0598
   9
  10 # Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same
  11 #Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
  12 boardrev=0x1307
  13 boardnum=777
  14 xtalfreq=26000
  15 boardflags=0x80201
  16 boardflags2=0x80
  17 sromrev=3
  18 wl0id=0x431b
  19 macaddr=DE:AD:BE:EF:00:00
  20 aa2g=1
  21 ag0=2
  22 maxp2ga0=74
  23 cck2gpo=0x2222
  24 ofdm2gpo=0x44444444
  25 mcs2gpo0=0x6666
  26 mcs2gpo1=0x6666
  27 pa0maxpwr=56
  28
  29 #P207 PA params
  30 #pa0b0=5447
  31 #pa0b1=-658
  32 #pa0b2=-175<div></div>
  33
  34 #Same PA params for P304,P305, P306, P307
  35
  36 pa0b0=5447
  37 pa0b1=-607
  38 pa0b2=-160
  39 pa0itssit=62
  40 pa1itssit=62
  41
  42
  43 cckPwrOffset=5
  44 ccode=0
  45 rssismf2g=0xa
  46 rssismc2g=0x3
  47 rssisav2g=0x7
  48 triso2g=0
  49 noise_cal_enable_2g=0
  50 noise_cal_po_2g=0
  51 swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
  52 temp_add=29767
  53 temp_mult=425
  54
  55 btc_flags=0x6
  56 btc_params0=5000
  57 btc_params1=1000
  58 btc_params6=63