# bcm4329 NVRAM file for Wandboard Dual sromrev=3 vendid=0x14e4 devid=0x432f boardtype=0x53e boardrev=0x41 #boardflags=0x1200 boardflags=0x200 # Specify the xtalfreq if it is otherthan 38.4MHz xtalfreq=37400 aa2g=3 aa5g=0 ag0=255 #tri2g=0x64 # 11g paparams pa0b0=5542,5542,5542 pa0b1=64244,64244,64244 pa0b2=65202,65202,65202 pa0itssit=62 pa0maxpwr=74 opo=0 mcs2gpo0=0x6666 mcs2gpo1=0x6666 # 11g rssi params rssismf2g=0xa,0xa,0xa rssismc2g=0xb,0xb,0xb rssisav2g=0x3,0x3,0x3 bxa2g=0 # country code ccode=ALL cctl=0x0 cckdigfilttype=0 ofdmdigfilttype=1 rxpo2g=0 boardnum=1 macaddr=DE:AD:BE:EF:00:00 # xtal pu and pd time control variable # pu time is driver default (0x1501) #r13t=0x1501 ####### nocrc=1 #for mfgc otpimagesize=182 # sdio extra configs hwhdr=0x05ffff031030031003100000 #This generates empty F1, F2 and F3 tuple chains, and may be used if the host SDIO stack does not require the standard tuples. #RAW1=80 02 fe ff #This includes the standard FUNCID and FUNCE tuples in the F1, F2, F3 and common CIS. RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A nvramver=4.218.214.0