Remove errormessage at hostapd channel set.

[people/pmueller/ipfire-2.x.git] / src / initscripts / init.d / hostapd

diff --git a/src/initscripts/init.d/hostapd b/src/initscripts/init.d/hostapd
index bb0da480b66261ef21d12ffad47c3a1e81486ae0..31083399b18f83ce6191fbe597f3b9e45717dd1d 100644 (file)
--- a/src/initscripts/init.d/hostapd
+++ b/src/initscripts/init.d/hostapd
@@ -5,62 +5,126 @@
 CHANNEL="05"
 TXPOWER="auto"
 INTERFACE="blue0"
+MACMODE="0"
+
 eval $(/usr/local/bin/readhash /var/ipfire/wlanap/settings)
 
 case "${1}" in
-        start)
+       start)
                mkdir -p /var/run/hostapd
-               if [ "$(/usr/sbin/iwconfig $INTERFACE | /bin/grep "Mode:Master")" == "" ]; then
 
-                   boot_mesg "Setting wlan $INTERFACE to Master mode... "
+               boot_mesg "Starting hostapd... "
+
+               # Check Interface configuration
+               if ! ip link show $INTERFACE > /dev/null 2>&1; then
+                       boot_mesg "Interface $INTERFACE doesn't exist." ${FAILURE}
+                       echo_failure
+                       exit 0
+               fi
+               if [ "$(ip link show $INTERFACE | /bin/grep "ether")" == "" ]; then
+                       boot_mesg "Interface $INTERFACE is assigned to wlan master device." ${FAILURE}
+                       boot_mesg "Please reboot to fix this." ${FAILURE}
+                       echo_failure
+                       exit 0
+               fi
+               if [ "$(iwconfig $INTERFACE | /bin/grep "IEEE")" == "" ]; then
+                       boot_mesg "Interface $INTERFACE is no wireless device." ${FAILURE}
+                       echo_failure
+                       exit 0
+               fi
+
+               # Detect driver
+               if [ -e "/sys/class/net/$INTERFACE/phy80211" ]; then
+                       DRIVER="NL80211"
+                       driver="nl80211"
+               elif [ -e "/sys/class/net/$INTERFACE/madwifi_name_type" ]; then
+                       DRIVER="MADWIFI"
+                       driver="madwifi"
+               elif [ "$(/bin/grep hostap /sys/class/net/$INTERFACE/uevent)" != "" ]; then
+                       DRIVER="HOSTAP"
+                       driver="hostap"
+               else
+                       boot_mesg "Interface $INTERFACE is a not supported wireless device." ${FAILURE}
+                       echo_failure
+                       exit 0
+               fi
 
-                   # Set Atheros Cards to master mode
-                   if [ -d /proc/net/madwifi/ath0/ ]; then
-                       /usr/bin/wlanconfig ath0 destroy > /dev/null
-                   fi
+               echo driver=$driver > /etc/hostapd.conf.tmp
+               grep -v "^driver=" /etc/hostapd.conf >> /etc/hostapd.conf.tmp
+               mv /etc/hostapd.conf.tmp /etc/hostapd.conf
 
-                   /usr/bin/wlanconfig $INTERFACE destroy > /dev/null
-                   /usr/bin/wlanconfig $INTERFACE create wlandev wifi0 wlanmode ap > /dev/null
+               echo DRIVER=$DRIVER > /var/ipfire/wlanap/settings.tmp
+               grep -v "^DRIVER=" /var/ipfire/wlanap/settings >> /var/ipfire/wlanap/settings.tmp
+               chown nobody:nobody /var/ipfire/wlanap/settings.tmp
+               chmod 644 /var/ipfire/wlanap/settings.tmp
+               mv /var/ipfire/wlanap/settings.tmp /var/ipfire/wlanap/settings
 
-                   # Set other cards to master mode
-                   #/usr/sbin/iwconfig blue0 mode master
+               if [ "$DRIVER" == "MADWIFI" ]; then
+                       if [ "$(/usr/sbin/iwconfig $INTERFACE | /bin/grep "Mode:Master")" == "" ]; then
+                               boot_mesg "Setting MADWIFI wlan $INTERFACE to Master mode... "
+                               # Set Atheros Cards to master mode
+                               /usr/bin/wlanconfig $INTERFACE destroy > /dev/null
+                               /usr/bin/wlanconfig $INTERFACE create wlandev wifi0 wlanmode ap > /dev/null
+                       fi
+               elif [ "$DRIVER" == "HOSTAP" ]; then
+                       if [ "$(/usr/sbin/iwconfig $INTERFACE | /bin/grep "Mode:Master")" == "" ]; then
+                               boot_mesg "Setting HOSTAP wlan $INTERFACE to Master mode... "
+                               # Set Prism Cards to master mode
+                               /usr/bin/iwconfig $INTERFACE mode master > /dev/null
+                       fi
                fi
-               
+
+               /usr/sbin/iwconfig $INTERFACE channel $CHANNEL 2>/dev/null
+               /usr/sbin/iwconfig $INTERFACE txpower $TXPOWER
+
+               /usr/bin/hostapd -P /var/run/hostapd /etc/hostapd.conf >/dev/null 2>&1 &
+
+               sleep 2
+
+               if [ $DRIVER == "MADWIFI" ]; then
+                       iwpriv $INTERFACE maccmd 3
+                       if [ $MACMODE != 0 ]; then
+                               FILE="/var/ipfire/wlanap/macfile"
+                               exec < $FILE
+                               while read LINE
+                               do
+                                       iwpriv $INTERFACE addmac $LINE
+                               done
+
+                               iwpriv $INTERFACE maccmd $MACMODE
+                       fi
+               fi
+
+               sleep 2
+
                if [ "$(/usr/sbin/iwconfig $INTERFACE | /bin/grep "Mode:Master")" == "" ]; then
-                   boot_mesg "Error! Can't set wlan master mode"
-                   echo_failure;
-                   exit 1;
+                       boot_mesg "Error! Can't set wlan master mode"
+                       echo_failure;
+                       exit 0;
                else
-                   # enable wlan module of collectd
-                   sed -i -e "s|#LoadPlugin wireless|LoadPlugin wireless|g" /etc/collectd.conf
-
-                   boot_mesg "Starting hostapd... "
-                   /usr/sbin/iwconfig $INTERFACE channel $CHANNEL
-                   /usr/sbin/iwconfig $INTERFACE txpower $TXPOWER
-                   /usr/bin/hostapd -P /var/run/hostapd /etc/hostapd.conf </dev/tty12 >/dev/tty12 2>&1 &
-                   evaluate_retval
+                       echo_ok
                fi
-;;
+               ;;
 
-        stop)
+       stop)
                boot_mesg "Stopping hostapd..."
 
-                killproc /usr/bin/hostapd
-                evaluate_retval
-                ;;
+               killproc /usr/bin/hostapd
+               evaluate_retval
+               ;;
 
-        restart)
-                ${0} stop
-                sleep 1
-                ${0} start
-                ;;
+       restart)
+               ${0} stop
+               sleep 1
+               ${0} start
+               ;;
 
-        status)
-                statusproc /usr/bin/hostapd
-                ;;
+       status)
+               statusproc /usr/bin/hostapd
+               ;;
 
-        *)
-                echo "Usage: ${0} {start|stop|restart|status}"
-                exit 1
-                ;;
+       *)
+               echo "Usage: ${0} {start|stop|restart|status}"
+               exit 1
+               ;;
 esac