+++ /dev/null
-# bcm4329 NVRAM file for Wandboard Dual
-
-sromrev=3
-vendid=0x14e4
-devid=0x432f
-boardtype=0x53e
-
-boardrev=0x41
-
-#boardflags=0x1200
-boardflags=0x200
-
-# Specify the xtalfreq if it is otherthan 38.4MHz
-xtalfreq=37400
-
-aa2g=3
-aa5g=0
-
-ag0=255
-#tri2g=0x64
-
-# 11g paparams
-pa0b0=5542,5542,5542
-pa0b1=64244,64244,64244
-pa0b2=65202,65202,65202
-
-pa0itssit=62
-pa0maxpwr=74
-opo=0
-mcs2gpo0=0x6666
-mcs2gpo1=0x6666
-
-# 11g rssi params
-rssismf2g=0xa,0xa,0xa
-rssismc2g=0xb,0xb,0xb
-rssisav2g=0x3,0x3,0x3
-bxa2g=0
-
-# country code
-ccode=ALL
-cctl=0x0
-cckdigfilttype=0
-ofdmdigfilttype=1
-
-rxpo2g=0
-
-boardnum=1
-macaddr=DE:AD:BE:EF:00:00
-
-# xtal pu and pd time control variable
-# pu time is driver default (0x1501)
-#r13t=0x1501
-
-#######
-nocrc=1
-
-#for mfgc
-otpimagesize=182
-
-# sdio extra configs
-hwhdr=0x05ffff031030031003100000
-
-#This generates empty F1, F2 and F3 tuple chains, and may be used if the host SDIO stack does not require the standard tuples.
-#RAW1=80 02 fe ff
-
-#This includes the standard FUNCID and FUNCE tuples in the F1, F2, F3 and common CIS.
-RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A
-nvramver=4.218.214.0
+++ /dev/null
-# bcm4330 NVRAM file for Wandboard Quad
-
-manfid=0x2d0
-prodid=0x0532
-vendid=0x14e4
-devid=0x4360
-boardtype=0x0532
-boardrev=0x20
-boardflags=0x10080201
-
-nocrc=1
-xtalfreq=37400
-xtalmode=0x20,0x4,0
-boardnum=22
-macaddr=DE:AD:BE:EF:00:00
-ag0=252
-ag1=252
-aa2g=1
-aa5g=1
-ccode=EU
-regrev=5
-
-#for BT-coexistence
-btc_params80=0
-btc_params6=10
-btc_params8=10000
-
-sd_gpout=0
-# sd_oobonly=1
-muxenab=0x10
-
-# 2G PA param_B42R 110927
-pa0b0=0x12E4
-pa0b1=0xFE09
-pa0b2=0xFF9A
-#pa0itssit=62
-rssismf2g=0xa
-rssismc2g=0x3
-rssisav2g=0x7
-
-# rssi params for 5GHz B42R_110803
-#rssismf5g=0x4
-rssismf5g=0xa
-rssismc5g=0x7
-rssisav5g=0x1
-#PA parameters for lower band
-pa1lob0=0x144F
-pa1lob1=0xFD6B
-pa1lob2=0xFF3B
-#PA parameters for midband
-pa1b0=0x139C
-pa1b1=0xFD87
-pa1b2=0xFF4F
-#PA parameters for high band
-pa1hib0=0x12CA
-pa1hib1=0xFD9A
-pa1hib2=0xFF4E
-
-# 2G PA offset
-maxp2ga0=64
-sromrev=3
-cckpo=0
-ofdm2gpo=0x66666666
-mcs2gpo0=0xaaaa
-mcs2gpo1=0xaaaa
-
-# 5G PA offset
-maxp5ga0=66
-maxp5gla0=66
-maxp5gha0=66
-ofdm5gpo=0x22222222
-ofdm5glpo=0x11111111
-ofdm5ghpo=0x22222222
-mcs5gpo0=0x6666
-mcs5gpo1=0x6666
-mcs5glpo0=0x5555
-mcs5glpo1=0x5555
-mcs5ghpo0=0x6666
-mcs5ghpo1=0x6666
-
-cckPwrOffset=4
-cckdigfilttype=22
-ofdmdigfilttype=2
-extpagain5g=2
-#wl0id=0x431b
-
-# For 2GHz Tx EVM/SM
-rfreg033=0x19
-rfreg033_cck=0x1d
-pacalidx2g=65
-dacrate2g=160
-txalpfbyp2g=1
-bphyscale=17
-
-# 5GHz LOFT and IQ CAL
-txgaintbl5g=1
-txiqlopapu5g=1
-txiqlopag5g=0x10
-iqlocalidx5g=24
-
-# 5GHz Noise CAL parameter
-noise_cal_po_5g=5
-noise_cal_enable_5g=0
-
-# 2GHz RxPER at low rates
-noise_cal_ref_2g=56
-noise_cal_po_bias_2g=-4
-noise_cal_enable_2g=1
-
-# Max input level on a-band
-triso5g=9
-
-# Tx power control, especially temp.
-tssitime=1
-
-#fc+1.7GHz Spur Elimination
-loidacmode5g=1
-
-swctrlmap_2g=0x84048404, 0x82028202, 0x84048404, 0x010202, 0x1ff
-swctrlmap_5g=0xC040C040, 0xB030A020, 0xA020C040, 0x010A02, 0x2F8
-
-
#lib
#lib/firmware
#lib/firmware/brcm
-lib/firmware/brcm/brcmfmac4329-sdio.txt
-lib/firmware/brcm/brcmfmac4330-sdio.txt
lib/firmware/brcm/brcmfmac43362-sdio.txt
#media
media/cdrom
lib/firmware/ti-connectivity/wl18xx-fw-4.bin
lib/firmware/v4l-cx23885-enc-broken.fw
lib/firmware/WHENCE
-lib/firmware/brcm/brcmfmac4329-sdio.txt
-lib/firmware/brcm/brcmfmac4330-sdio.txt
lib/firmware/brcm/brcmfmac43362-sdio.txt