+++ /dev/null
-# bcm4329 NVRAM file for Wandboard Dual
-
-sromrev=3
-vendid=0x14e4
-devid=0x432f
-boardtype=0x53e
-
-boardrev=0x41
-
-#boardflags=0x1200
-boardflags=0x200
-
-# Specify the xtalfreq if it is otherthan 38.4MHz
-xtalfreq=37400
-
-aa2g=3
-aa5g=0
-
-ag0=255
-#tri2g=0x64
-
-# 11g paparams
-pa0b0=5542,5542,5542
-pa0b1=64244,64244,64244
-pa0b2=65202,65202,65202
-
-pa0itssit=62
-pa0maxpwr=74
-opo=0
-mcs2gpo0=0x6666
-mcs2gpo1=0x6666
-
-# 11g rssi params
-rssismf2g=0xa,0xa,0xa
-rssismc2g=0xb,0xb,0xb
-rssisav2g=0x3,0x3,0x3
-bxa2g=0
-
-# country code
-ccode=ALL
-cctl=0x0
-cckdigfilttype=0
-ofdmdigfilttype=1
-
-rxpo2g=0
-
-boardnum=1
-macaddr=DE:AD:BE:EF:00:00
-
-# xtal pu and pd time control variable
-# pu time is driver default (0x1501)
-#r13t=0x1501
-
-#######
-nocrc=1
-
-#for mfgc
-otpimagesize=182
-
-# sdio extra configs
-hwhdr=0x05ffff031030031003100000
-
-#This generates empty F1, F2 and F3 tuple chains, and may be used if the host SDIO stack does not require the standard tuples.
-#RAW1=80 02 fe ff
-
-#This includes the standard FUNCID and FUNCE tuples in the F1, F2, F3 and common CIS.
-RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A
-nvramver=4.218.214.0
+++ /dev/null
-# bcm4330 NVRAM file for Wandboard Quad
-
-manfid=0x2d0
-prodid=0x0532
-vendid=0x14e4
-devid=0x4360
-boardtype=0x0532
-boardrev=0x20
-boardflags=0x10080201
-
-nocrc=1
-xtalfreq=37400
-xtalmode=0x20,0x4,0
-boardnum=22
-macaddr=DE:AD:BE:EF:00:00
-ag0=252
-ag1=252
-aa2g=1
-aa5g=1
-ccode=EU
-regrev=5
-
-#for BT-coexistence
-btc_params80=0
-btc_params6=10
-btc_params8=10000
-
-sd_gpout=0
-# sd_oobonly=1
-muxenab=0x10
-
-# 2G PA param_B42R 110927
-pa0b0=0x12E4
-pa0b1=0xFE09
-pa0b2=0xFF9A
-#pa0itssit=62
-rssismf2g=0xa
-rssismc2g=0x3
-rssisav2g=0x7
-
-# rssi params for 5GHz B42R_110803
-#rssismf5g=0x4
-rssismf5g=0xa
-rssismc5g=0x7
-rssisav5g=0x1
-#PA parameters for lower band
-pa1lob0=0x144F
-pa1lob1=0xFD6B
-pa1lob2=0xFF3B
-#PA parameters for midband
-pa1b0=0x139C
-pa1b1=0xFD87
-pa1b2=0xFF4F
-#PA parameters for high band
-pa1hib0=0x12CA
-pa1hib1=0xFD9A
-pa1hib2=0xFF4E
-
-# 2G PA offset
-maxp2ga0=64
-sromrev=3
-cckpo=0
-ofdm2gpo=0x66666666
-mcs2gpo0=0xaaaa
-mcs2gpo1=0xaaaa
-
-# 5G PA offset
-maxp5ga0=66
-maxp5gla0=66
-maxp5gha0=66
-ofdm5gpo=0x22222222
-ofdm5glpo=0x11111111
-ofdm5ghpo=0x22222222
-mcs5gpo0=0x6666
-mcs5gpo1=0x6666
-mcs5glpo0=0x5555
-mcs5glpo1=0x5555
-mcs5ghpo0=0x6666
-mcs5ghpo1=0x6666
-
-cckPwrOffset=4
-cckdigfilttype=22
-ofdmdigfilttype=2
-extpagain5g=2
-#wl0id=0x431b
-
-# For 2GHz Tx EVM/SM
-rfreg033=0x19
-rfreg033_cck=0x1d
-pacalidx2g=65
-dacrate2g=160
-txalpfbyp2g=1
-bphyscale=17
-
-# 5GHz LOFT and IQ CAL
-txgaintbl5g=1
-txiqlopapu5g=1
-txiqlopag5g=0x10
-iqlocalidx5g=24
-
-# 5GHz Noise CAL parameter
-noise_cal_po_5g=5
-noise_cal_enable_5g=0
-
-# 2GHz RxPER at low rates
-noise_cal_ref_2g=56
-noise_cal_po_bias_2g=-4
-noise_cal_enable_2g=1
-
-# Max input level on a-band
-triso5g=9
-
-# Tx power control, especially temp.
-tssitime=1
-
-#fc+1.7GHz Spur Elimination
-loidacmode5g=1
-
-swctrlmap_2g=0x84048404, 0x82028202, 0x84048404, 0x010202, 0x1ff
-swctrlmap_5g=0xC040C040, 0xB030A020, 0xA020C040, 0x010A02, 0x2F8
-
-
#lib
#lib/firmware
#lib/firmware/brcm
-lib/firmware/brcm/brcmfmac4329-sdio.txt
-lib/firmware/brcm/brcmfmac4330-sdio.txt
lib/firmware/brcm/brcmfmac43362-sdio.txt
#media
media/cdrom
etc/ipsec.user.conf
etc/ipsec.user.secrets
etc/localtime
+etc/rc.d/rcsysinit.d/S19checkfstab
+etc/rc.d/rcsysinit.d/S70console
etc/shadow
etc/ssh/ssh_config
etc/ssh/sshd_config
etc/ssl/openssl.cnf
etc/sudoers
etc/sysconfig/firewall.local
+etc/sysconfig/modules
etc/sysconfig/rc.local
etc/udev/rules.d/30-persistent-network.rules
srv/web/ipfire/html/proxy.pac
--- /dev/null
+../../../../common/armv5tel/glibc
\ No newline at end of file
etc/rc.d/init.d/leds
opt/pakfire/etc/pakfire.conf
usr/lib/firewall/rules.pl
+usr/local/bin/backupiso
usr/local/bin/update-bootloader
usr/local/share/GeoIP/GeoIP.dat
var/ipfire/header.pl
--- /dev/null
+../../../common/hwdata
\ No newline at end of file
lib/firmware/ti-connectivity/wl18xx-fw-4.bin
lib/firmware/v4l-cx23885-enc-broken.fw
lib/firmware/WHENCE
-lib/firmware/brcm/brcmfmac4329-sdio.txt
-lib/firmware/brcm/brcmfmac4330-sdio.txt
lib/firmware/brcm/brcmfmac43362-sdio.txt
. /opt/pakfire/lib/functions.sh
/usr/local/bin/backupctrl exclude >/dev/null 2>&1
+
+function find_device() {
+ local mountpoint="${1}"
+
+ local root
+ local dev mp fs flags rest
+ while read -r dev mp fs flags rest; do
+ # Skip unwanted entries
+ [ "${dev}" = "rootfs" ] && continue
+
+ if [ "${mp}" = "${mountpoint}" ] && [ -b "${dev}" ]; then
+ root="$(basename "${dev}")"
+ break
+ fi
+ done < /proc/mounts
+
+ # Get the actual device from the partition that holds /
+ while [ -n "${root}" ]; do
+ if [ -e "/sys/block/${root}" ]; then
+ echo "${root}"
+ return 0
+ fi
+
+ # Remove last character
+ root="${root::-1}"
+ done
+
+ return 1
+}
+
+
#
# Remove old core updates from pakfire cache to save space...
-core=86
+core=87
for (( i=1; i<=${core}; i++ ))
do
rm -f /var/cache/pakfire/core-upgrade-*-$i.ipfire
case "$(uname -m)" in
i?86)
- #
- # Update to GRUB2
- #
- echo
- echo Update grub configuration ...
- if grep -qE "^serial" /boot/old-grub-config; then
- sed -i /etc/default/grub \
- -e "s|panic=10|& console=ttyS0,115200n8|g"
- echo "GRUB_TERMINAL=\"serial\"" >> /etc/default/grub
- echo "GRUB_SERIAL_COMMAND=\"serial --unit=0 --speed=115200\"" >> /etc/default/grub
- fi
+ case "$(find_device "/")" in
+ xvd* )
+ echo Skip remove grub2 files, because pygrub fail.
+ rm -f /boot/grub/*
+ echo config will recreated by linux-pae install.
+ ;;
+ * )
+ #
+ # Update to GRUB2
+ #
+ echo
+ echo Update grub configuration ...
+ if grep -qE "^serial" /boot/old-grub-config; then
+ sed -i /etc/default/grub \
+ -e "s|panic=10|& console=ttyS0,115200n8|g"
+ echo "GRUB_TERMINAL=\"serial\"" >> /etc/default/grub
+ echo "GRUB_SERIAL_COMMAND=\"serial --unit=0 --speed=115200\"" >> /etc/default/grub
+ fi
- if ! /usr/local/bin/update-bootloader; then
- logger -p syslog.emerg -t ipfire \
- "Could not update the bootloader!"
- fi
- ;;
+ if ! /usr/local/bin/update-bootloader; then
+ logger -p syslog.emerg -t ipfire \
+ "Could not update the bootloader!"
+ fi
+ ;;
+ esac
esac
# Force (re)install pae kernel if pae is supported
-uenvcmd=if test "$board" = "panda" ;then run bootpanda; else run bootbananapi; fi;
KVER=xxxKVERxxx
-bootpanda=setenv initrd_high 90000000; fatload mmc 0:1 0x82000000 zImage-ipfire-multi; fatload mmc 0:1 ${fdtaddr} dtb-${KVER}-ipfire-multi/${fdtfile}; setenv bootargs video=800x600 console=tty1 rootwait smsc95xx.macaddr=$usbethaddr root=/dev/mmcblk0p3 ro; bootz 0x82000000 - ${fdtaddr};
-bootbananapi=setenv fdt_high ffffffff; fatload mmc 0:1 0x46000000 zImage-ipfire-multi; fatload mmc 0:1 0x49000000 dtb-${KVER}-ipfire-multi/sun7i-a20-bananapi.dtb; setenv bootargs console=ttyS0,115200n8 rootwait root=/dev/mmcblk0p3 rootwait; bootz 0x46000000 - 0x49000000;
+DTBSUNXI=sun7i-a20-bananapi.dtb
+uenvcmd=if test "$board" = "panda" ;then run bootpanda; else run bootsunxi; fi;
+bootpanda=setenv initrd_high 90000000; fatload mmc 0:1 0x82000000 zImage-ipfire-multi; fatload mmc 0:1 ${fdtaddr} dtb-${KVER}-ipfire-multi/${fdtfile}; setenv bootargs video=800x600 console=tty1 rootwait smsc95xx.macaddr=$usbethaddr root=/dev/mmcblk0p3; bootz 0x82000000 - ${fdtaddr};
+bootsunxi=setenv fdt_high ffffffff; fatload mmc 0:1 0x46000000 zImage-ipfire-multi; fatload mmc 0:1 0x49000000 dtb-${KVER}-ipfire-multi/${DTBSUNXI}; fatload mmc 0:1 0x49100000 uInit-ipfire-multi; setenv bootargs console=ttyS0,115200n8 rootwait root=/dev/mmcblk0p3 rootwait; bootz 0x46000000 0x49100000 0x49000000;
- look what is going on: "xm top" or "xm list"
This script can also build a Citrix XenCenter xva image. (Need xz-aware
-xen version. Tested with Citrix Xen Server 6.2.5 beta)
+xen version. Tested with Citrix Xen Server 6.5)
- run "XEN_IMG_TYPE=xva bash xen-image-maker.sh" to build an xva image.
-- import the vm with "xe vm-import file=ipfire.xva"
+- import the vm with "xe vm-import filename=ipfire.xva"
mount -o loop $IMGvar $MNThdd/var
# Install IPFire without kernel modules
-xz -d < $ISODIR/$SNAME-$VERSION.tlz > $TMPDIR/$SNAME-$VERSION.tar
+xz -d < $ISODIR/distro.img > $TMPDIR/$SNAME-$VERSION.tar
tar -C $MNThdd/ -xvf $TMPDIR/$SNAME-$VERSION.tar \
--exclude=lib/modules* --exclude=boot* --numeric-owner
echo "timeout 10" > $MNThdd/boot/grub/grub.conf
echo "default 0" >> $MNThdd/boot/grub/grub.conf
echo "title IPFire ($KERN_TYPE-kernel)" >> $MNThdd/boot/grub/grub.conf
-echo " kernel /vmlinuz-$KVER-ipfire-$KERN_TYPE root=/dev/$P3 rootdelay=10 panic=10 console=$CONSOLE ro" \
+echo " kernel /vmlinuz-$KVER-ipfire-$KERN_TYPE root=/dev/$P3 rootdelay=10 panic=10 console=$CONSOLE" \
>> $MNThdd/boot/grub/grub.conf
-echo " initrd /ipfirerd-$KVER-$KERN_TYPE.img" >> $MNThdd/boot/grub/grub.conf
+echo " initrd /initramfs-$KVER-ipfire-$KERN_TYPE.img" >> $MNThdd/boot/grub/grub.conf
echo "# savedefault 0" >> $MNThdd/boot/grub/grub.conf
ln -s grub.conf $MNThdd/boot/grub/menu.lst
mount --bind /dev $MNThdd/dev
mount --bind /sys $MNThdd/sys
chroot $MNThdd /usr/bin/perl -e "require '/var/ipfire/lang.pl'; &Lang::BuildCacheLang"
-sed -i -e "s|DEVICE1|/dev/$P1|g" $MNThdd/etc/fstab
-sed -i -e "s|DEVICE2|/dev/$P2|g" $MNThdd/etc/fstab
-sed -i -e "s|DEVICE3|/dev/$P3|g" $MNThdd/etc/fstab
-sed -i -e "s|DEVICE4|/dev/$P4|g" $MNThdd/etc/fstab
-sed -i -e "s|FSTYPE|$FSTYPE|g" $MNThdd/etc/fstab
+# create fstab
+echo "/dev/$P1 /boot auto defaults 1 3" > $MNThdd/etc/fstab
+echo "/dev/$P2 swap swap defaults 0 0" >> $MNThdd/etc/fstab
+echo "/dev/$P3 / auto defaults 1 1" >> $MNThdd/etc/fstab
+echo "/dev/$P4 /var auto defaults 1 2" >> $MNThdd/etc/fstab
+
#Remove root / fstab check
rm -rf $MNThdd/etc/rc.d/rcsysinit.d/S19checkfstab
include Config
-VER = 3.14.32
+VER = 3.14.33
-RPI_PATCHES = 3.14.32-grsec-ipfire1
-A7M_PATCHES = 3.14.32-grsec-ipfire1
-GRS_PATCHES = grsecurity-3.0-3.14.32-201502062101.patch.xz
+RPI_PATCHES = 3.14.33-grsec-ipfire1
+A7M_PATCHES = 3.14.33-grsec-ipfire1
+GRS_PATCHES = grsecurity-3.0-3.14.33-201502180832.patch.xz
THISAPP = linux-$(VER)
DL_FILE = linux-$(VER).tar.xz
arm7-multi-patches-$(A7M_PATCHES).patch.xz = $(URL_IPFIRE)/arm7-multi-patches-$(A7M_PATCHES).patch.xz
$(GRS_PATCHES) = $(URL_IPFIRE)/$(GRS_PATCHES)
-$(DL_FILE)_MD5 = 3178fb8f6f1eafcffdd730fec68754f8
-rpi-patches-$(RPI_PATCHES).patch.xz_MD5 = 375dc501711ff3ffeffdfc9848675d26
-arm7-multi-patches-$(A7M_PATCHES).patch.xz_MD5 = efcfe5889f120d879387dd4ebe881587
-$(GRS_PATCHES)_MD5 = c1565eb2a630a673f3ace31a6901e251
+$(DL_FILE)_MD5 = c19feb0646fde7e96602ac313fb7e5d6
+rpi-patches-$(RPI_PATCHES).patch.xz_MD5 = e423c8b3a408f23b9a26f8f0f4384c50
+arm7-multi-patches-$(A7M_PATCHES).patch.xz_MD5 = f147ce7c81889d2c5134304f3a6e60e3
+$(GRS_PATCHES)_MD5 = 119943451628ff5a62437637d60a585d
install : $(TARGET)
# Apply Arm7-multiarch kernel patches.
cd $(DIR_APP) && xzcat $(DIR_DL)/arm7-multi-patches-$(A7M_PATCHES).patch.xz | patch -Np1
- # Update Banana Pi, Lamobo-R1 and add Banana Pro dtb
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.14.x-update_banana_dts.patch
-
# Install switch api userspace header
cd $(DIR_APP) && install -v -m644 include/uapi/linux/switch.h /usr/include/linux/
+
+ # Fix Lamobo-R1 SATA Power
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.14.x-lamobo-r1-fix-sata-pwr.patch
endif
ifeq "$(KCFG)" "-rpi"
NAME="IPFire" # Software name
SNAME="ipfire" # Short name
VERSION="2.17" # Version number
-CORE="87-rc1" # Core Level (Filename)
-PAKFIRE_CORE="86" # Core Level (PAKFIRE)
+CORE="87" # Core Level (Filename)
+PAKFIRE_CORE="87" # Core Level (PAKFIRE)
GIT_BRANCH=`git rev-parse --abbrev-ref HEAD` # Git Branch
SLOGAN="www.ipfire.org" # Software slogan
CONFIG_ROOT=/var/ipfire # Configuration rootdir
############################################################################
#
. /opt/pakfire/lib/functions.sh
-extract_files
-#
-KVER=xxxKVERxxx
-ROOT=`mount | grep " / " | cut -d" " -f1`
-ROOTUUID=`blkid -c /dev/null -sUUID $ROOT | cut -d'"' -f2`
-if [ ! -z $ROOTUUID ]; then
- ROOT="UUID=$ROOTUUID"
-fi
-if [ -f /boot/grub/grub.conf ]; then
-MOUNT=`grep "kernel" /boot/grub/grub.conf | tail -n 1`
-# Nur den letzten Parameter verwenden
-echo $MOUNT > /dev/null
-MOUNT=$_
-if [ ! $MOUNT == "rw" ]; then
- MOUNT="ro"
-fi
-ENTRY=`grep "savedefault" /boot/grub/grub.conf | tail -n 1`
-# Nur den letzten Parameter verwenden
-echo $ENTRY > /dev/null
-let ENTRY=$_+1
+function find_partition() {
+ local mountpoint="${1}"
-#Check if the system use serial console...
-if [ "$(grep "^serial" /boot/grub/grub.conf)" == "" ]; then
- console=""
-else
- console=" console=ttyS0,115200n8"
-fi
+ local root
+ local dev mp fs flags rest
+ while read -r dev mp fs flags rest; do
+ # Skip unwanted entries
+ [ "${dev}" = "rootfs" ] && continue
+ if [ "${mp}" = "${mountpoint}" ] && [ -b "${dev}" ]; then
+ root="$(basename "${dev}")"
+ break
+ fi
+ done < /proc/mounts
+ echo ${root}
+ return 0
+}
+
+extract_files
#
-# backup grub.conf
-#
-cp /boot/grub/grub.conf /boot/grub/grub-backup-$KVER-pae_install.conf
-#
-# Add new Entry to grub.conf
-#
-echo "" >> /boot/grub/grub.conf
-echo "title IPFire (PAE-Kernel)" >> /boot/grub/grub.conf
-echo " kernel /vmlinuz-$KVER-ipfire-pae root=$ROOT panic=10$console $MOUNT" >> /boot/grub/grub.conf
-echo " initrd /ipfirerd-$KVER-pae.img" >> /boot/grub/grub.conf
-echo " savedefault $ENTRY" >> /boot/grub/grub.conf
-fi
+KVER=xxxKVERxxx
#
# Create new module depency
#
/usr/bin/dracut --force --xz /boot/initramfs-$KVER-ipfire-pae.img $KVER-ipfire-pae
-#
-# Update grub2 config
-#
-grub-mkconfig > /boot/grub/grub.cfg
+
+ROOT="$(find_partition "/")"
+case $ROOT in
+ xvd* )
+ #
+ # We are on XEN so create new grub.conf / menu.lst for pygrub
+ #
+ echo "timeout 10" > /boot/grub/grub.conf
+ echo "default 0" >> /boot/grub/grub.conf
+ echo "title IPFire (pae-kernel)" >> /boot/grub/grub.conf
+ echo " kernel /vmlinuz-$KVER-ipfire-pae root=/dev/$ROOT rootdelay=10 panic=10 console=hvc0" \
+ >> /boot/grub/grub.conf
+ echo " initrd /initramfs-$KVER-ipfire-pae.img" >> /boot/grub/grub.conf
+ echo "# savedefault 0" >> /boot/grub/grub.conf
+ ln -s grub.conf $MNThdd/boot/grub/menu.lst
+ ;;
+ * )
+ #
+ # Update grub2 config
+ #
+ grub-mkconfig > /boot/grub/grub.cfg
+ ;;
+esac
# request a reboot if pae is supported
if [ ! "$(grep "^flags.* pae " /proc/cpuinfo)" == "" ]; then
############################################################################
#
. /opt/pakfire/lib/functions.sh
+if [ -f /boot/grub/grub.conf ]; then
+ echo "Error! Connot remove linux-pae because we are on XEN."
+ exit 1
+fi
remove_files
rm -rf /boot/initramfs-*-pae.img
rm -rf /boot/vmlinuz-*-pae
rm -rf /lib/modules/*-ipfire-pae
-if [ -f /boot/grub/grub.conf ]; then
- cp /boot/grub/grub.conf /boot/grub/grub-backup-pae_uninstall.conf
- sed -i "/title IPFire (PAE-Kernel)/,+3d" /boot/grub/grub.conf
-fi
grub-mkconfig > /boot/grub/grub.cfg
sync && sync
############################################################################
#
. /opt/pakfire/lib/functions.sh
-./uninstall.sh
+remove_files
+rm -rf /boot/initramfs-*-pae.img
+rm -rf /boot/vmlinuz-*-pae
+rm -rf /lib/modules/*-ipfire-pae
+if [ ! -f /boot/grub/grub.conf ]; then
+ grub-mkconfig > /boot/grub/grub.cfg
+fi
./install.sh
+++ /dev/null
-Add initial support for cm-fx6 module.
-
-cm-fx6 is a module based on mx6q SoC with the following features:
-- Up to 4GB of DDR3
-- 1 LCD/DVI output port
-- 1 HDMI output port
-- 2 LVDS LCD ports
-- Gigabit Ethernet
-- Analog Audio
-- CAN
-- SATA
-- NAND
-- PCIE
-
-This patch allows to boot up the module, configures the serial console,
-the Ethernet adapter and the heartbeat led.
-
-cm-fx6 is embedded inside the Utilite computer.
-
-Signed-off-by: Valentin Raevsky <valentin@compulab.co.il>
-Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
----
-
-Shawn, can this still be applied for 3.13 ?
-
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index f0895c5..7521a34 100644
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -117,6 +117,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
- imx6dl-sabresd.dtb \
- imx6dl-wandboard.dtb \
- imx6q-arm2.dtb \
-+ imx6q-cm-fx6.dtb \
- imx6q-sabreauto.dtb \
- imx6q-sabrelite.dtb \
- imx6q-sabresd.dtb \
-diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
-new file mode 100644
-index 0000000..2419751
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
-@@ -0,0 +1,53 @@
-+/*
-+ * Copyright 2013 CompuLab Ltd.
-+ *
-+ * Author: Valentin Raevsky <valentin@compulab.co.il>
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+
-+/ {
-+ model = "CompuLab CM-FX6";
-+ compatible = "compulab,cm-fx6", "fsl,imx6q";
-+
-+ memory {
-+ reg = <0x10000000 0x80000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ heartbeat-led {
-+ label = "Heartbeat";
-+ gpios = <&gpio2 31 0>;
-+ linux,default-trigger = "heartbeat";
-+ };
-+ };
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet_1>;
-+ phy-mode = "rgmii";
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand_1>;
-+ status = "okay";
-+};
-+
-+&uart4 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart4_1>;
-+ status = "okay";
-+};
--- /dev/null
+From 7f558e6e8abee42cc966e2cb64be0de875797e07 Mon Sep 17 00:00:00 2001
+From: Arne Fitzenreiter <arne_f@ipfire.org>
+Date: Fri, 20 Feb 2015 10:01:26 +0100
+Subject: [PATCH] sun7i: dts: lamobo-r1: fix sata pwr regulator pin.
+
+Lamobo-R1 use PB3 instead of PB8 for controlling the SATA power regulator.
+---
+ arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 18 ++++++++++++++++++
+ 1 file changed, 18 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+index 1eb6c9b..d634d2f 100644
+--- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
++++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+@@ -166,6 +166,16 @@
+ reg = <1>;
+ };
+ };
++
++ pio: pinctrl@01c20800 {
++ ahci_pwr_pin_a: ahci_pwr_pin@0 {
++ allwinner,pins = "PB3";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <0>;
++ allwinner,pull = <0>;
++ };
++ };
++
+ };
+
+ leds {
+@@ -181,6 +191,14 @@
+ };
+
+ reg_ahci_5v: ahci-5v {
++ compatible = "regulator-fixed";
++ pinctrl-names = "default";
++ pinctrl-0 = <&ahci_pwr_pin_a>;
++ regulator-name = "ahci-5v";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ enable-active-high;
++ gpio = <&pio 1 3 0>;
+ status = "okay";
+ };
+
+--
+1.8.5.2
+
+++ /dev/null
-diff -Naur linux-3.14.30.org/arch/arm/boot/dts/Makefile linux-3.14.30/arch/arm/boot/dts/Makefile
---- linux-3.14.30.org/arch/arm/boot/dts/Makefile 2015-01-29 19:56:17.000000000 +0100
-+++ linux-3.14.30/arch/arm/boot/dts/Makefile 2015-01-29 20:41:06.598335182 +0100
-@@ -304,6 +304,7 @@
- sun5i-a13-olinuxino-micro.dtb \
- sun6i-a31-colombus.dtb \
- sun7i-a20-bananapi.dtb \
-+ sun7i-a20-bananapro.dtb \
- sun7i-a20-cubieboard2.dtb \
- sun7i-a20-cubietruck.dtb \
- sun7i-a20-lamobo-r1.dtb \
-diff -Naur linux-3.14.30.org/arch/arm/boot/dts/sun7i-a20-bananapi.dts linux-3.14.30/arch/arm/boot/dts/sun7i-a20-bananapi.dts
---- linux-3.14.30.org/arch/arm/boot/dts/sun7i-a20-bananapi.dts 2015-01-29 19:56:17.000000000 +0100
-+++ linux-3.14.30/arch/arm/boot/dts/sun7i-a20-bananapi.dts 2015-01-29 20:33:18.143334959 +0100
-@@ -199,7 +199,7 @@
- regulator-name = "gmac-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-- startup-delay-us = <50000>;
-+ startup-delay-us = <100000>;
- enable-active-high;
- gpio = <&pio 7 23 0>;
- status = "okay";
-diff -Naur linux-3.14.30.org/arch/arm/boot/dts/sun7i-a20-bananapro.dts linux-3.14.30/arch/arm/boot/dts/sun7i-a20-bananapro.dts
---- linux-3.14.30.org/arch/arm/boot/dts/sun7i-a20-bananapro.dts 1970-01-01 01:00:00.000000000 +0100
-+++ linux-3.14.30/arch/arm/boot/dts/sun7i-a20-bananapro.dts 2015-01-29 20:40:45.153335172 +0100
-@@ -0,0 +1,262 @@
-+/*
-+ * Copyright 2015 Arne Fitzenreiter
-+ * Arne Fitzenreiter <arne_f@ipfire.org>
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+/include/ "sun7i-a20.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "LeMaker Banana Pro";
-+ compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
-+
-+ aliases {
-+ spi0 = &spi1;
-+ spi1 = &spi2;
-+ };
-+
-+ soc@01c00000 {
-+ spi1: spi@01c06000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi1_pins_a>;
-+ status = "okay";
-+ };
-+
-+ spi2: spi@01c17000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi2_pins_a>;
-+ status = "okay";
-+ };
-+
-+ mmc0: mmc@01c0f000 {
-+ pinctrl-names = "default", "default";
-+ pinctrl-0 = <&mmc0_pins_a>;
-+ pinctrl-1 = <&mmc0_cd_pin_bananapi>;
-+ cd-gpios = <&pio 7 10 0>; /* PH10 */
-+ status = "okay";
-+ };
-+
-+ mmc3: mmc@01c12000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc3_pins_a>;
-+ vmmc-supply = <®_vmmc3>;
-+ bus-width = <4>;
-+ non-removable;
-+ status = "okay";
-+ };
-+
-+ usbphy: phy@01c13400 {
-+ usb1_vbus-supply = <®_usb1_vbus>;
-+ usb2_vbus-supply = <®_usb2_vbus>;
-+ status = "okay";
-+ };
-+
-+ ehci0: usb@01c14000 {
-+ status = "okay";
-+ };
-+
-+ ohci0: usb@01c14400 {
-+ status = "okay";
-+ };
-+
-+ ahci: sata@01c18000 {
-+ target-supply = <®_ahci_5v>;
-+ status = "okay";
-+ };
-+
-+ ehci1: usb@01c1c000 {
-+ status = "okay";
-+ };
-+
-+ ohci1: usb@01c1c400 {
-+ status = "okay";
-+ };
-+
-+ pinctrl@01c20800 {
-+ usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
-+ allwinner,pins = "PH0";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
-+ usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
-+ allwinner,pins = "PH1";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
-+ led_pins_bananapi: led_pins@0 {
-+ allwinner,pins = "PH24", "PG2";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
-+ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
-+ allwinner,pins = "PH10";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <1>;
-+ };
-+
-+ vmmc3_pin_bananapro: vmmc3_pin@0 {
-+ allwinner,pins = "PH22";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
-+ gmac_power_pin_bananapi: gmac_power_pin@0 {
-+ allwinner,pins = "PH23";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+ };
-+
-+ lradc: lradc@01c22800 {
-+ allwinner,chan0-step = <200>;
-+ linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN
-+ KEY_MENU KEY_SEARCH KEY_HOME
-+ KEY_ESC KEY_ENTER>;
-+ status = "okay";
-+ };
-+
-+ ir0: ir@01c21800 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ir0_pins_a>;
-+ status = "okay";
-+ };
-+
-+ uart0: serial@01c28000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+ };
-+
-+ uart2: serial@01c28800 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart2_pins_a>;
-+ status = "okay";
-+ };
-+
-+ uart6: serial@01c29800 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart6_pins_a>;
-+ status = "okay";
-+ };
-+
-+ uart7: serial@01c29c00 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart7_pins_a>;
-+ status = "okay";
-+ };
-+
-+ i2c0: i2c@01c2ac00 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins_a>;
-+ status = "okay";
-+
-+ axp: axp20x@34 {
-+ reg = <0x34>;
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 8>;
-+ axp,system-power-controller;
-+ /include/ "x-powers-axp209.dtsi"
-+ };
-+ };
-+
-+ i2c1: i2c@01c2b000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins_a>;
-+ status = "okay";
-+ };
-+
-+ i2c2: i2c@01c2b400 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c2_pins_a>;
-+ status = "okay";
-+ };
-+
-+ gmac: ethernet@01c50000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac_pins_rgmii_a>;
-+ phy = <&phy1>;
-+ phy-mode = "rgmii";
-+ phy-supply = <®_gmac_3v3>;
-+ status = "okay";
-+
-+ phy1: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&led_pins_bananapi>;
-+
-+ green {
-+ label = "bananapi:green:usr";
-+ gpios = <&pio 7 24 0>;
-+ linux,default-trigger = "heartbeat";
-+ };
-+ blue {
-+ label = "bananapi:blue:usr";
-+ gpios = <&pio 6 2 0>;
-+ linux,default-trigger = "mmc0";
-+ };
-+ };
-+
-+ reg_ahci_5v: ahci-5v {
-+ status = "okay";
-+ };
-+
-+ reg_usb1_vbus: usb1-vbus {
-+ pinctrl-0 = <&usb1_vbus_pin_bananapro>;
-+ gpio = <&pio 7 0 0>; /* PH0 */
-+ status = "okay";
-+ };
-+
-+ reg_usb2_vbus: usb2-vbus {
-+ pinctrl-0 = <&usb2_vbus_pin_bananapro>;
-+ gpio = <&pio 7 1 0>; /* PH1 */
-+ status = "okay";
-+ };
-+
-+ reg_gmac_3v3: gmac-3v3 {
-+ compatible = "regulator-fixed";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac_power_pin_bananapi>;
-+ regulator-name = "gmac-3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ startup-delay-us = <100000>;
-+ enable-active-high;
-+ gpio = <&pio 7 23 0>;
-+ status = "okay";
-+ };
-+
-+ reg_vmmc3: vmmc3 {
-+ compatible = "regulator-fixed";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&vmmc3_pin_bananapro>;
-+ regulator-name = "vmmc3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ enable-active-high;
-+ gpio = <&pio 7 22 0>;
-+ };
-+};
-diff -Naur linux-3.14.30.org/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts linux-3.14.30/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
---- linux-3.14.30.org/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts 2015-01-29 19:56:17.000000000 +0100
-+++ linux-3.14.30/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts 2015-01-30 00:00:01.678340873 +0100
-@@ -199,7 +199,7 @@
- regulator-name = "gmac-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-- startup-delay-us = <50000>;
-+ startup-delay-us = <100000>;
- enable-active-high;
- gpio = <&pio 7 23 0>;
- status = "okay";
COREVER=$(cat /opt/pakfire/db/core/mine)
# FIXME: edit this lines before release
-URL="http://download.ipfire.org/releases/ipfire-2.x/2.15-core$COREVER/"
-ISO="ipfire-2.15.i586-full-core$COREVER.iso"
+URL="http://download.ipfire.org/releases/ipfire-2.x/2.17-core$COREVER/"
+ISO="ipfire-2.17.i586-full-core$COREVER.iso"
if [ -z $1 ]; then
echo usage: $0 backup-file
projects / people / pmueller / ipfire-2.x.git / commitdiff
