firmwares: add Banana Pro and Wandboard wlan NVRAM files.
authorArne Fitzenreiter <arne_f@ipfire.org>
Fri, 30 Jan 2015 17:09:21 +0000 (18:09 +0100)
committerArne Fitzenreiter <arne_f@ipfire.org>
Fri, 30 Jan 2015 17:09:21 +0000 (18:09 +0100)
config/lib/firmware/brcm/brcmfmac4329-sdio.txt [new file with mode: 0644]
config/lib/firmware/brcm/brcmfmac4330-sdio.txt [new file with mode: 0644]
config/lib/firmware/brcm/brcmfmac43362-sdio.txt [new file with mode: 0644]
config/rootfiles/common/stage2
config/rootfiles/core/86/filelists/updated-firmwares
lfs/stage2

diff --git a/config/lib/firmware/brcm/brcmfmac4329-sdio.txt b/config/lib/firmware/brcm/brcmfmac4329-sdio.txt
new file mode 100644 (file)
index 0000000..3832006
--- /dev/null
@@ -0,0 +1,68 @@
+# bcm4329 NVRAM file for Wandboard Dual
+
+sromrev=3
+vendid=0x14e4
+devid=0x432f
+boardtype=0x53e
+
+boardrev=0x41
+
+#boardflags=0x1200
+boardflags=0x200
+
+# Specify the xtalfreq if it is otherthan 38.4MHz
+xtalfreq=37400
+
+aa2g=3
+aa5g=0
+
+ag0=255
+#tri2g=0x64
+
+# 11g paparams
+pa0b0=5542,5542,5542
+pa0b1=64244,64244,64244
+pa0b2=65202,65202,65202
+
+pa0itssit=62
+pa0maxpwr=74
+opo=0
+mcs2gpo0=0x6666
+mcs2gpo1=0x6666
+
+# 11g rssi params
+rssismf2g=0xa,0xa,0xa
+rssismc2g=0xb,0xb,0xb
+rssisav2g=0x3,0x3,0x3
+bxa2g=0
+
+# country code
+ccode=ALL
+cctl=0x0
+cckdigfilttype=0
+ofdmdigfilttype=1
+
+rxpo2g=0
+
+boardnum=1
+macaddr=DE:AD:BE:EF:00:00
+
+# xtal pu and pd time control variable
+# pu time is driver default (0x1501)
+#r13t=0x1501
+
+#######
+nocrc=1
+
+#for mfgc
+otpimagesize=182
+
+# sdio extra configs
+hwhdr=0x05ffff031030031003100000
+
+#This generates empty F1, F2 and F3 tuple chains, and may be used if the host SDIO stack does not require the standard tuples.
+#RAW1=80 02 fe ff
+
+#This includes the standard FUNCID and FUNCE tuples in the F1, F2, F3 and common CIS.
+RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A
+nvramver=4.218.214.0
diff --git a/config/lib/firmware/brcm/brcmfmac4330-sdio.txt b/config/lib/firmware/brcm/brcmfmac4330-sdio.txt
new file mode 100644 (file)
index 0000000..c5c2611
--- /dev/null
@@ -0,0 +1,122 @@
+# bcm4330 NVRAM file for Wandboard Quad
+
+manfid=0x2d0
+prodid=0x0532
+vendid=0x14e4
+devid=0x4360
+boardtype=0x0532
+boardrev=0x20
+boardflags=0x10080201
+
+nocrc=1
+xtalfreq=37400
+xtalmode=0x20,0x4,0
+boardnum=22
+macaddr=DE:AD:BE:EF:00:00
+ag0=252
+ag1=252
+aa2g=1
+aa5g=1
+ccode=EU
+regrev=5
+
+#for BT-coexistence
+btc_params80=0
+btc_params6=10
+btc_params8=10000
+
+sd_gpout=0
+# sd_oobonly=1
+muxenab=0x10
+
+# 2G PA param_B42R 110927
+pa0b0=0x12E4
+pa0b1=0xFE09
+pa0b2=0xFF9A
+#pa0itssit=62
+rssismf2g=0xa
+rssismc2g=0x3
+rssisav2g=0x7
+
+# rssi params for 5GHz B42R_110803
+#rssismf5g=0x4
+rssismf5g=0xa
+rssismc5g=0x7
+rssisav5g=0x1
+#PA parameters for lower band
+pa1lob0=0x144F
+pa1lob1=0xFD6B
+pa1lob2=0xFF3B
+#PA parameters for midband
+pa1b0=0x139C
+pa1b1=0xFD87
+pa1b2=0xFF4F
+#PA parameters for high band
+pa1hib0=0x12CA
+pa1hib1=0xFD9A
+pa1hib2=0xFF4E
+
+# 2G PA offset
+maxp2ga0=64
+sromrev=3
+cckpo=0
+ofdm2gpo=0x66666666
+mcs2gpo0=0xaaaa
+mcs2gpo1=0xaaaa
+
+# 5G PA offset
+maxp5ga0=66
+maxp5gla0=66
+maxp5gha0=66
+ofdm5gpo=0x22222222
+ofdm5glpo=0x11111111
+ofdm5ghpo=0x22222222
+mcs5gpo0=0x6666
+mcs5gpo1=0x6666
+mcs5glpo0=0x5555
+mcs5glpo1=0x5555
+mcs5ghpo0=0x6666
+mcs5ghpo1=0x6666
+
+cckPwrOffset=4
+cckdigfilttype=22
+ofdmdigfilttype=2
+extpagain5g=2
+#wl0id=0x431b
+
+# For 2GHz Tx EVM/SM
+rfreg033=0x19
+rfreg033_cck=0x1d
+pacalidx2g=65
+dacrate2g=160
+txalpfbyp2g=1
+bphyscale=17
+
+# 5GHz LOFT and IQ CAL
+txgaintbl5g=1
+txiqlopapu5g=1
+txiqlopag5g=0x10
+iqlocalidx5g=24
+
+# 5GHz Noise CAL parameter
+noise_cal_po_5g=5
+noise_cal_enable_5g=0
+
+# 2GHz RxPER at low rates
+noise_cal_ref_2g=56
+noise_cal_po_bias_2g=-4
+noise_cal_enable_2g=1
+
+# Max input level on a-band
+triso5g=9
+
+# Tx power control, especially temp.
+tssitime=1
+
+#fc+1.7GHz Spur Elimination
+loidacmode5g=1
+
+swctrlmap_2g=0x84048404, 0x82028202, 0x84048404, 0x010202, 0x1ff
+swctrlmap_5g=0xC040C040, 0xB030A020, 0xA020C040, 0x010A02, 0x2F8
+
+
diff --git a/config/lib/firmware/brcm/brcmfmac43362-sdio.txt b/config/lib/firmware/brcm/brcmfmac43362-sdio.txt
new file mode 100644 (file)
index 0000000..d967bfe
--- /dev/null
@@ -0,0 +1,58 @@
+# bcm43362 NVRAM file for LeMaker Banana Pro and Cubietruck
+#AP6210_NVRAM_V1.2_03192013
+
+manfid=0x2d0
+prodid=0x492
+vendid=0x14e4
+devid=0x4343
+boardtype=0x0598
+
+# Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same
+#Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
+boardrev=0x1307
+boardnum=777
+xtalfreq=26000
+boardflags=0x80201
+boardflags2=0x80
+sromrev=3
+wl0id=0x431b
+macaddr=DE:AD:BE:EF:00:00
+aa2g=1
+ag0=2
+maxp2ga0=74
+cck2gpo=0x2222
+ofdm2gpo=0x44444444
+mcs2gpo0=0x6666
+mcs2gpo1=0x6666
+pa0maxpwr=56
+
+#P207 PA params
+#pa0b0=5447
+#pa0b1=-658
+#pa0b2=-175<div></div>
+
+#Same PA params for P304,P305, P306, P307
+
+pa0b0=5447
+pa0b1=-607
+pa0b2=-160
+pa0itssit=62
+pa1itssit=62
+
+
+cckPwrOffset=5
+ccode=0
+rssismf2g=0xa
+rssismc2g=0x3
+rssisav2g=0x7
+triso2g=0
+noise_cal_enable_2g=0
+noise_cal_po_2g=0
+swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
+temp_add=29767
+temp_mult=425
+
+btc_flags=0x6
+btc_params0=5000
+btc_params1=1000
+btc_params6=63
index 323f978..663aef5 100644 (file)
@@ -46,6 +46,11 @@ etc/system-release
 #home
 home/nobody
 #lib
+#lib/firmware
+#lib/firmware/brcm
+lib/firmware/brcm/brcmfmac4329-sdio.txt
+lib/firmware/brcm/brcmfmac4330-sdio.txt
+lib/firmware/brcm/brcmfmac43362-sdio.txt
 #media
 media/cdrom
 media/floppy
@@ -61,6 +66,7 @@ root/.bash_logout
 root/.bash_profile
 root/.bashrc
 root/ipfire
+run
 #sbin
 #srv
 #usr/bin
@@ -95,7 +101,6 @@ usr/local/bin/scanhd
 usr/local/bin/settime
 usr/local/bin/timecheck
 usr/local/bin/timezone-transition
-#usr/local/bin/uname
 usr/local/bin/update-bootloader
 usr/local/bin/update-lang-cache
 #usr/local/include
@@ -139,7 +144,6 @@ usr/share/doc/licenses/GPLv3
 #usr/share/misc
 #usr/share/terminfo
 #usr/share/zoneinfo
-run
 #var
 #var/cache
 var/empty
index 6a7a43c..f923b15 100644 (file)
@@ -200,3 +200,6 @@ lib/firmware/ti-connectivity/wl18xx-fw-3.bin
 lib/firmware/ti-connectivity/wl18xx-fw-4.bin
 lib/firmware/v4l-cx23885-enc-broken.fw
 lib/firmware/WHENCE
+lib/firmware/brcm/brcmfmac4329-sdio.txt
+lib/firmware/brcm/brcmfmac4330-sdio.txt
+lib/firmware/brcm/brcmfmac43362-sdio.txt
index 19d9553..895ee15 100644 (file)
@@ -49,7 +49,7 @@ $(TARGET) :
        @$(PREBUILD)
 
        # Create directories
-       -mkdir -pv /{bin,boot,etc/opt,etc/modprobe.d,home,lib,mnt,opt,run}
+       -mkdir -pv /{bin,boot,etc/opt,etc/modprobe.d,home,lib/firmware/brcm,mnt,opt,run}
        -mkdir -pv /{media/{floppy,cdrom,usbkey},sbin,srv,var}
        -install -dv -m 0750 /root
        -install -dv -m 1777 /tmp /var/tmp
@@ -75,6 +75,7 @@ $(TARGET) :
 
        # Config files
        cp -rvf $(DIR_SRC)/config/etc/* /etc;
+       cp -rvf $(DIR_SRC)/config/lib/* /lib;
        touch /etc/{fs,m}tab
        echo "$(NAME) v$(VERSION) - $(SLOGAN)" >  /etc/issue
        echo "===============================" >> /etc/issue