Merge branch 'master' of ssh://git.ipfire.org/pub/git/ipfire-2.x into seventeen-geoip

Conflicts:
	make.sh

diff --git a/config/etc/modprobe.d/btmrvl_sdio.conf b/config/etc/modprobe.d/btmrvl_sdio.conf
new file mode 100644 (file)
index 0000000..66cd021
--- /dev/null
+++ b/config/etc/modprobe.d/btmrvl_sdio.conf
@@ -0,0 +1,2 @@
+# seems to crash often
+blacklist btmrvl_sdio

diff --git a/config/firewall/rules.pl b/config/firewall/rules.pl
index 834e248716fc3cb1e91f8a8c4a4eed1808176a14..cd2f3a63590cb2428d7ba9e0fbcbc7f3bf4fa22e 100644 (file)
--- a/config/firewall/rules.pl
+++ b/config/firewall/rules.pl
@@ -284,7 +284,7 @@ sub buildrules {
                # Concurrent connection limit
                my @ratelimit_options = ();
 
-               if (($elements gt 34) && ($$hash{$key}[32] eq 'ON')) {
+               if (($elements ge 34) && ($$hash{$key}[32] eq 'ON')) {
                        my $conn_limit = $$hash{$key}[33];
 
                        if ($conn_limit ge 1) {
@@ -300,13 +300,13 @@ sub buildrules {
                }
 
                # Ratelimit
-               if (($elements gt 37) && ($$hash{$key}[34] eq 'ON')) {
+               if (($elements ge 37) && ($$hash{$key}[34] eq 'ON')) {
                        my $rate_limit = "$$hash{$key}[35]/$$hash{$key}[36]";
 
-                               if ($rate_limit) {
-                                       push(@ratelimit_options, ("-m", "limit"));
-                                       push(@ratelimit_options, ("--limit", $rate_limit));
-                               }
+                       if ($rate_limit) {
+                               push(@ratelimit_options, ("-m", "limit"));
+                               push(@ratelimit_options, ("--limit", $rate_limit));
+                       }
                }
 
                # Check which protocols are used in this rule and so that we can
@@ -372,20 +372,12 @@ sub buildrules {
                                                push(@source_options, ("-s", $source));
                                        }
 
-                                       if ($source_intf) {
-                                               push(@source_options, ("-i", $source_intf));
-                                       }
-
                                        # Prepare destination options.
                                        my @destination_options = ();
                                        if ($destination) {
                                                push(@destination_options, ("-d", $destination));
                                        }
 
-                                       if ($destination_intf) {
-                                               push(@destination_options, ("-o", $destination_intf));
-                                       }
-
                                        # Add time constraint options.
                                        push(@options, @time_options);
 
@@ -480,6 +472,17 @@ sub buildrules {
                                                }
                                        }
 
+                                       # Add source and destination interface to the filter rules.
+                                       # These are supposed to help filtering forged packets that originate
+                                       # from BLUE with an IP address from GREEN for instance.
+                                       if ($source_intf) {
+                                               push(@source_options, ("-i", $source_intf));
+                                       }
+
+                                       if ($destination_intf) {
+                                               push(@destination_options, ("-o", $destination_intf));
+                                       }
+
                                        push(@options, @source_options);
                                        push(@options, @destination_options);
 

diff --git a/config/hostapd/hostapd.conf b/config/hostapd/hostapd.conf
index e1f493f96edad90e5f12f692131b9344e7213628..33fd30411ba7ebd76e64519aaec520d8f8c9ca8a 100644 (file)
--- a/config/hostapd/hostapd.conf
+++ b/config/hostapd/hostapd.conf
@@ -3,7 +3,7 @@ driver=nl80211
 #
 interface=blue0
 hw_mode=g
-channel=05
+channel=6
 logger_syslog=-1
 logger_syslog_level=3
 logger_stdout=-1

diff --git a/config/kernel/kernel.config.armv5tel-ipfire-kirkwood b/config/kernel/kernel.config.armv5tel-ipfire-kirkwood
index 13fac5eb74ea0b56c7797e0e02ea2ba2bbeffc47..18ffcd77c739074dd887661fde4a3f31e4d47811 100644 (file)
--- a/config/kernel/kernel.config.armv5tel-ipfire-kirkwood
+++ b/config/kernel/kernel.config.armv5tel-ipfire-kirkwood
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/arm 3.14.22 Kernel Configuration
+# Linux/arm 3.14.30 Kernel Configuration
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -3079,7 +3079,7 @@ CONFIG_REGULATOR_LP8755=m
 # CONFIG_REGULATOR_TPS62360 is not set
 # CONFIG_REGULATOR_TPS65023 is not set
 # CONFIG_REGULATOR_TPS6507X is not set
-CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_SUPPORT=m
 
 #
 # Multimedia core support
@@ -3090,9 +3090,9 @@ CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
 # CONFIG_MEDIA_RADIO_SUPPORT is not set
 CONFIG_MEDIA_RC_SUPPORT=y
 CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_DEV=m
 CONFIG_VIDEO_V4L2_SUBDEV_API=y
-CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L2=m
 # CONFIG_VIDEO_ADV_DEBUG is not set
 # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 CONFIG_VIDEO_TUNER=m
@@ -3106,7 +3106,7 @@ CONFIG_VIDEOBUF2_CORE=m
 CONFIG_VIDEOBUF2_MEMOPS=m
 CONFIG_VIDEOBUF2_DMA_CONTIG=m
 CONFIG_VIDEOBUF2_VMALLOC=m
-CONFIG_DVB_CORE=y
+CONFIG_DVB_CORE=m
 CONFIG_DVB_NET=y
 CONFIG_TTPCI_EEPROM=m
 CONFIG_DVB_MAX_ADAPTERS=8
@@ -3115,7 +3115,7 @@ CONFIG_DVB_DYNAMIC_MINORS=y
 #
 # Media drivers
 #
-CONFIG_RC_CORE=y
+CONFIG_RC_CORE=m
 CONFIG_RC_MAP=m
 CONFIG_RC_DECODERS=y
 CONFIG_LIRC=m
@@ -3393,7 +3393,7 @@ CONFIG_SMS_SIANO_RC=y
 #
 CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
 CONFIG_MEDIA_ATTACH=y
-CONFIG_VIDEO_IR_I2C=y
+CONFIG_VIDEO_IR_I2C=m
 
 #
 # Audio decoders, processors and mixers
@@ -3480,24 +3480,24 @@ CONFIG_SOC_CAMERA_OV9640=m
 CONFIG_SOC_CAMERA_OV9740=m
 CONFIG_SOC_CAMERA_RJ54N1=m
 CONFIG_SOC_CAMERA_TW9910=m
-CONFIG_MEDIA_TUNER=y
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA827X=y
-CONFIG_MEDIA_TUNER_TDA18271=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_MT2060=m
 CONFIG_MEDIA_TUNER_MT2063=m
 CONFIG_MEDIA_TUNER_MT2266=m
 CONFIG_MEDIA_TUNER_MT2131=m
 CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_XC4000=y
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
 CONFIG_MEDIA_TUNER_MXL5005S=m
 CONFIG_MEDIA_TUNER_MXL5007T=m
-CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_MEDIA_TUNER_MC44S803=m
 CONFIG_MEDIA_TUNER_MAX2165=m
 CONFIG_MEDIA_TUNER_TDA18218=m
 CONFIG_MEDIA_TUNER_FC0011=m

diff --git a/config/kernel/kernel.config.armv5tel-ipfire-multi b/config/kernel/kernel.config.armv5tel-ipfire-multi
index a1c49d433c7cb62f547c799721bb329bae5e73f0..e3fa93e9d69f37be80c2a646bd150a813a536046 100644 (file)
--- a/config/kernel/kernel.config.armv5tel-ipfire-multi
+++ b/config/kernel/kernel.config.armv5tel-ipfire-multi
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/arm 3.14.25 Kernel Configuration
+# Linux/arm 3.14.30 Kernel Configuration
 #
 CONFIG_ARM=y
 CONFIG_MIGHT_HAVE_PCI=y
@@ -2053,8 +2053,8 @@ CONFIG_IP1000=m
 CONFIG_JME=m
 CONFIG_NET_VENDOR_MARVELL=y
 CONFIG_MV643XX_ETH=m
-CONFIG_MVMDIO=m
-CONFIG_MVNETA=m
+CONFIG_MVMDIO=y
+CONFIG_MVNETA=y
 CONFIG_SKGE=m
 # CONFIG_SKGE_DEBUG is not set
 CONFIG_SKGE_GENESIS=y
@@ -2155,6 +2155,8 @@ CONFIG_XILINX_EMACLITE=m
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 CONFIG_PHYLIB=y
+CONFIG_SWCONFIG=m
+# CONFIG_SWCONFIG_LEDS is not set
 
 #
 # MII PHY device drivers
@@ -2178,12 +2180,17 @@ CONFIG_LSI_ET1011C_PHY=m
 CONFIG_MICREL_PHY=m
 CONFIG_FIXED_PHY=y
 CONFIG_MDIO_BITBANG=m
-# CONFIG_MDIO_GPIO is not set
+CONFIG_MDIO_GPIO=m
 CONFIG_MDIO_SUN4I=m
 CONFIG_MDIO_BUS_MUX=m
 CONFIG_MDIO_BUS_MUX_GPIO=m
 CONFIG_MDIO_BUS_MUX_MMIOREG=m
 CONFIG_GATEWORKS_GW16083=m
+CONFIG_B53=m
+CONFIG_B53_PHY_DRIVER=m
+# CONFIG_B53_MMAP_DRIVER is not set
+# CONFIG_B53_SRAB_DRIVER is not set
+CONFIG_B53_PHY_FIXUP=y
 # CONFIG_PLIP is not set
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
@@ -3330,7 +3337,7 @@ CONFIG_REGULATOR_TI_ABB=y
 # CONFIG_REGULATOR_TPS6507X is not set
 CONFIG_REGULATOR_TWL4030=y
 CONFIG_REGULATOR_VEXPRESS=m
-CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_SUPPORT=m
 
 #
 # Multimedia core support
@@ -3341,23 +3348,23 @@ CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
 # CONFIG_MEDIA_RADIO_SUPPORT is not set
 CONFIG_MEDIA_RC_SUPPORT=y
 CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_DEV=m
 CONFIG_VIDEO_V4L2_SUBDEV_API=y
-CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L2=m
 # CONFIG_VIDEO_ADV_DEBUG is not set
 # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 CONFIG_VIDEO_TUNER=m
 CONFIG_V4L2_MEM2MEM_DEV=m
-CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_GEN=m
 CONFIG_VIDEOBUF_DMA_SG=m
 CONFIG_VIDEOBUF_VMALLOC=m
-CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEOBUF_DMA_CONTIG=m
 CONFIG_VIDEOBUF_DVB=m
 CONFIG_VIDEOBUF2_CORE=m
 CONFIG_VIDEOBUF2_MEMOPS=m
 CONFIG_VIDEOBUF2_DMA_CONTIG=m
 CONFIG_VIDEOBUF2_VMALLOC=m
-CONFIG_DVB_CORE=y
+CONFIG_DVB_CORE=m
 CONFIG_DVB_NET=y
 CONFIG_TTPCI_EEPROM=m
 CONFIG_DVB_MAX_ADAPTERS=8
@@ -3366,7 +3373,7 @@ CONFIG_DVB_DYNAMIC_MINORS=y
 #
 # Media drivers
 #
-CONFIG_RC_CORE=y
+CONFIG_RC_CORE=m
 CONFIG_RC_MAP=m
 CONFIG_RC_DECODERS=y
 CONFIG_LIRC=m
@@ -3603,7 +3610,7 @@ CONFIG_V4L_PLATFORM_DRIVERS=y
 # CONFIG_VIDEO_CAFE_CCIC is not set
 # CONFIG_VIDEO_DM6446_CCDC is not set
 CONFIG_VIDEO_OMAP2_VOUT_VRFB=y
-CONFIG_VIDEO_OMAP2_VOUT=y
+CONFIG_VIDEO_OMAP2_VOUT=m
 CONFIG_VIDEO_TIMBERDALE=m
 CONFIG_SOC_CAMERA=m
 CONFIG_SOC_CAMERA_SCALE_CROP=m
@@ -3651,7 +3658,7 @@ CONFIG_SMS_SIANO_RC=y
 #
 CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
 CONFIG_MEDIA_ATTACH=y
-CONFIG_VIDEO_IR_I2C=y
+CONFIG_VIDEO_IR_I2C=m
 
 #
 # Audio decoders, processors and mixers
@@ -3737,24 +3744,24 @@ CONFIG_SOC_CAMERA_OV9640=m
 CONFIG_SOC_CAMERA_OV9740=m
 CONFIG_SOC_CAMERA_RJ54N1=m
 CONFIG_SOC_CAMERA_TW9910=m
-CONFIG_MEDIA_TUNER=y
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA827X=y
-CONFIG_MEDIA_TUNER_TDA18271=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_MT2060=m
 CONFIG_MEDIA_TUNER_MT2063=m
 CONFIG_MEDIA_TUNER_MT2266=m
 CONFIG_MEDIA_TUNER_MT2131=m
 CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_XC4000=y
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
 CONFIG_MEDIA_TUNER_MXL5005S=m
 CONFIG_MEDIA_TUNER_MXL5007T=m
-CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_MEDIA_TUNER_MC44S803=m
 CONFIG_MEDIA_TUNER_MAX2165=m
 CONFIG_MEDIA_TUNER_TDA18218=m
 CONFIG_MEDIA_TUNER_FC0011=m
@@ -4852,7 +4859,7 @@ CONFIG_RTC_DRV_PL030=m
 CONFIG_RTC_DRV_PL031=m
 CONFIG_RTC_DRV_VT8500=m
 CONFIG_RTC_DRV_SUNXI=y
-CONFIG_RTC_DRV_MV=m
+CONFIG_RTC_DRV_MV=y
 CONFIG_RTC_DRV_MXC=m
 CONFIG_RTC_DRV_SNVS=m
 CONFIG_RTC_DRV_MOXART=m

diff --git a/config/kernel/kernel.config.armv5tel-ipfire-rpi b/config/kernel/kernel.config.armv5tel-ipfire-rpi
index cfc9dc13065f92dd0531fa899f4a566b3ad7b5d6..17a7305ebd0df2c61f0f858fff7d6cceb39f4935 100644 (file)
--- a/config/kernel/kernel.config.armv5tel-ipfire-rpi
+++ b/config/kernel/kernel.config.armv5tel-ipfire-rpi
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/arm 3.14.22 Kernel Configuration
+# Linux/arm 3.14.30 Kernel Configuration
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -1325,7 +1325,7 @@ CONFIG_DM_DELAY=m
 # CONFIG_DM_SWITCH is not set
 # CONFIG_TARGET_CORE is not set
 CONFIG_NETDEVICES=y
-CONFIG_MII=y
+CONFIG_MII=m
 CONFIG_NET_CORE=y
 CONFIG_BONDING=m
 CONFIG_DUMMY=m
@@ -1453,7 +1453,7 @@ CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_RTL8152=m
-CONFIG_USB_USBNET=y
+CONFIG_USB_USBNET=m
 CONFIG_USB_NET_AX8817X=m
 CONFIG_USB_NET_AX88179_178A=m
 CONFIG_USB_NET_CDCETHER=m
@@ -1465,7 +1465,7 @@ CONFIG_USB_NET_DM9601=m
 CONFIG_USB_NET_SR9700=m
 CONFIG_USB_NET_SR9800=m
 CONFIG_USB_NET_SMSC75XX=m
-CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_NET_SMSC95XX=m
 CONFIG_USB_NET_GL620A=m
 CONFIG_USB_NET_NET1080=m
 CONFIG_USB_NET_PLUSB=m

diff --git a/config/kernel/kernel.config.i586-ipfire b/config/kernel/kernel.config.i586-ipfire
index 5869b8818b7d9a72d247bcafe4064995fc5af4ff..87687d962ee66c37826bba30edbc38b0d3b1bb52 100644 (file)
--- a/config/kernel/kernel.config.i586-ipfire
+++ b/config/kernel/kernel.config.i586-ipfire
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/x86 3.14.22 Kernel Configuration
+# Linux/x86 3.14.30 Kernel Configuration
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
@@ -421,8 +421,6 @@ CONFIG_X86_MCE_THRESHOLD=y
 # CONFIG_X86_MCE_INJECT is not set
 CONFIG_X86_THERMAL_VECTOR=y
 CONFIG_VM86=y
-CONFIG_X86_16BIT=y
-CONFIG_X86_ESPFIX32=y
 CONFIG_TOSHIBA=m
 CONFIG_I8K=m
 # CONFIG_X86_REBOOTFIXUPS is not set
@@ -724,6 +722,7 @@ CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_MISC=y
 CONFIG_COREDUMP=y
 CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_IOSF_MBI=m
 CONFIG_NET=y
 
 #

diff --git a/config/kernel/kernel.config.i586-ipfire-pae b/config/kernel/kernel.config.i586-ipfire-pae
index 54cfb0642b3a130b4ef1dad6ff12d42e66a1306b..c5a437a59688d615af27b32a7fae0feedf9f0c5c 100644 (file)
--- a/config/kernel/kernel.config.i586-ipfire-pae
+++ b/config/kernel/kernel.config.i586-ipfire-pae
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/x86 3.14.22 Kernel Configuration
+# Linux/x86 3.14.30 Kernel Configuration
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
@@ -431,8 +431,6 @@ CONFIG_X86_MCE_THRESHOLD=y
 # CONFIG_X86_MCE_INJECT is not set
 CONFIG_X86_THERMAL_VECTOR=y
 CONFIG_VM86=y
-CONFIG_X86_16BIT=y
-CONFIG_X86_ESPFIX32=y
 CONFIG_TOSHIBA=m
 CONFIG_I8K=m
 # CONFIG_X86_REBOOTFIXUPS is not set
@@ -738,6 +736,7 @@ CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_MISC=y
 CONFIG_COREDUMP=y
 CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_IOSF_MBI=m
 CONFIG_NET=y
 
 #
@@ -3832,7 +3831,6 @@ CONFIG_DVB_TDA826X=m
 CONFIG_DVB_TUA6100=m
 CONFIG_DVB_CX24116=m
 CONFIG_DVB_CX24117=m
-CONFIG_DVB_M88DC2800=m
 CONFIG_DVB_SI21XX=m
 CONFIG_DVB_TS2020=m
 CONFIG_DVB_DS3000=m
@@ -3914,6 +3912,8 @@ CONFIG_DVB_A8293=m
 CONFIG_DVB_LGS8GXX=m
 CONFIG_DVB_ATBM8830=m
 CONFIG_DVB_TDA665x=m
+CONFIG_DVB_DVBSKY_M88DS3103=m
+CONFIG_DVB_M88DC2800=m
 CONFIG_DVB_IX2505V=m
 CONFIG_DVB_IT913X_FE=m
 CONFIG_DVB_M88RS2000=m

diff --git a/config/lib/firmware/brcm/brcmfmac4329-sdio.txt b/config/lib/firmware/brcm/brcmfmac4329-sdio.txt
new file mode 100644 (file)
index 0000000..3832006
--- /dev/null
+++ b/config/lib/firmware/brcm/brcmfmac4329-sdio.txt
@@ -0,0 +1,68 @@
+# bcm4329 NVRAM file for Wandboard Dual
+
+sromrev=3
+vendid=0x14e4
+devid=0x432f
+boardtype=0x53e
+
+boardrev=0x41
+
+#boardflags=0x1200
+boardflags=0x200
+
+# Specify the xtalfreq if it is otherthan 38.4MHz
+xtalfreq=37400
+
+aa2g=3
+aa5g=0
+
+ag0=255
+#tri2g=0x64
+
+# 11g paparams
+pa0b0=5542,5542,5542
+pa0b1=64244,64244,64244
+pa0b2=65202,65202,65202
+
+pa0itssit=62
+pa0maxpwr=74
+opo=0
+mcs2gpo0=0x6666
+mcs2gpo1=0x6666
+
+# 11g rssi params
+rssismf2g=0xa,0xa,0xa
+rssismc2g=0xb,0xb,0xb
+rssisav2g=0x3,0x3,0x3
+bxa2g=0
+
+# country code
+ccode=ALL
+cctl=0x0
+cckdigfilttype=0
+ofdmdigfilttype=1
+
+rxpo2g=0
+
+boardnum=1
+macaddr=DE:AD:BE:EF:00:00
+
+# xtal pu and pd time control variable
+# pu time is driver default (0x1501)
+#r13t=0x1501
+
+#######
+nocrc=1
+
+#for mfgc
+otpimagesize=182
+
+# sdio extra configs
+hwhdr=0x05ffff031030031003100000
+
+#This generates empty F1, F2 and F3 tuple chains, and may be used if the host SDIO stack does not require the standard tuples.
+#RAW1=80 02 fe ff
+
+#This includes the standard FUNCID and FUNCE tuples in the F1, F2, F3 and common CIS.
+RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A
+nvramver=4.218.214.0

diff --git a/config/lib/firmware/brcm/brcmfmac4330-sdio.txt b/config/lib/firmware/brcm/brcmfmac4330-sdio.txt
new file mode 100644 (file)
index 0000000..c5c2611
--- /dev/null
+++ b/config/lib/firmware/brcm/brcmfmac4330-sdio.txt
@@ -0,0 +1,122 @@
+# bcm4330 NVRAM file for Wandboard Quad
+
+manfid=0x2d0
+prodid=0x0532
+vendid=0x14e4
+devid=0x4360
+boardtype=0x0532
+boardrev=0x20
+boardflags=0x10080201
+
+nocrc=1
+xtalfreq=37400
+xtalmode=0x20,0x4,0
+boardnum=22
+macaddr=DE:AD:BE:EF:00:00
+ag0=252
+ag1=252
+aa2g=1
+aa5g=1
+ccode=EU
+regrev=5
+
+#for BT-coexistence
+btc_params80=0
+btc_params6=10
+btc_params8=10000
+
+sd_gpout=0
+# sd_oobonly=1
+muxenab=0x10
+
+# 2G PA param_B42R 110927
+pa0b0=0x12E4
+pa0b1=0xFE09
+pa0b2=0xFF9A
+#pa0itssit=62
+rssismf2g=0xa
+rssismc2g=0x3
+rssisav2g=0x7
+
+# rssi params for 5GHz B42R_110803
+#rssismf5g=0x4
+rssismf5g=0xa
+rssismc5g=0x7
+rssisav5g=0x1
+#PA parameters for lower band
+pa1lob0=0x144F
+pa1lob1=0xFD6B
+pa1lob2=0xFF3B
+#PA parameters for midband
+pa1b0=0x139C
+pa1b1=0xFD87
+pa1b2=0xFF4F
+#PA parameters for high band
+pa1hib0=0x12CA
+pa1hib1=0xFD9A
+pa1hib2=0xFF4E
+
+# 2G PA offset
+maxp2ga0=64
+sromrev=3
+cckpo=0
+ofdm2gpo=0x66666666
+mcs2gpo0=0xaaaa
+mcs2gpo1=0xaaaa
+
+# 5G PA offset
+maxp5ga0=66
+maxp5gla0=66
+maxp5gha0=66
+ofdm5gpo=0x22222222
+ofdm5glpo=0x11111111
+ofdm5ghpo=0x22222222
+mcs5gpo0=0x6666
+mcs5gpo1=0x6666
+mcs5glpo0=0x5555
+mcs5glpo1=0x5555
+mcs5ghpo0=0x6666
+mcs5ghpo1=0x6666
+
+cckPwrOffset=4
+cckdigfilttype=22
+ofdmdigfilttype=2
+extpagain5g=2
+#wl0id=0x431b
+
+# For 2GHz Tx EVM/SM
+rfreg033=0x19
+rfreg033_cck=0x1d
+pacalidx2g=65
+dacrate2g=160
+txalpfbyp2g=1
+bphyscale=17
+
+# 5GHz LOFT and IQ CAL
+txgaintbl5g=1
+txiqlopapu5g=1
+txiqlopag5g=0x10
+iqlocalidx5g=24
+
+# 5GHz Noise CAL parameter
+noise_cal_po_5g=5
+noise_cal_enable_5g=0
+
+# 2GHz RxPER at low rates
+noise_cal_ref_2g=56
+noise_cal_po_bias_2g=-4
+noise_cal_enable_2g=1
+
+# Max input level on a-band
+triso5g=9
+
+# Tx power control, especially temp.
+tssitime=1
+
+#fc+1.7GHz Spur Elimination
+loidacmode5g=1
+
+swctrlmap_2g=0x84048404, 0x82028202, 0x84048404, 0x010202, 0x1ff
+swctrlmap_5g=0xC040C040, 0xB030A020, 0xA020C040, 0x010A02, 0x2F8
+
+

diff --git a/config/lib/firmware/brcm/brcmfmac43362-sdio.txt b/config/lib/firmware/brcm/brcmfmac43362-sdio.txt
new file mode 100644 (file)
index 0000000..d967bfe
--- /dev/null
+++ b/config/lib/firmware/brcm/brcmfmac43362-sdio.txt
@@ -0,0 +1,58 @@
+# bcm43362 NVRAM file for LeMaker Banana Pro and Cubietruck
+#AP6210_NVRAM_V1.2_03192013
+
+manfid=0x2d0
+prodid=0x492
+vendid=0x14e4
+devid=0x4343
+boardtype=0x0598
+
+# Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same
+#Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
+boardrev=0x1307
+boardnum=777
+xtalfreq=26000
+boardflags=0x80201
+boardflags2=0x80
+sromrev=3
+wl0id=0x431b
+macaddr=DE:AD:BE:EF:00:00
+aa2g=1
+ag0=2
+maxp2ga0=74
+cck2gpo=0x2222
+ofdm2gpo=0x44444444
+mcs2gpo0=0x6666
+mcs2gpo1=0x6666
+pa0maxpwr=56
+
+#P207 PA params
+#pa0b0=5447
+#pa0b1=-658
+#pa0b2=-175<div></div>
+
+#Same PA params for P304,P305, P306, P307
+
+pa0b0=5447
+pa0b1=-607
+pa0b2=-160
+pa0itssit=62
+pa1itssit=62
+
+
+cckPwrOffset=5
+ccode=0
+rssismf2g=0xa
+rssismc2g=0x3
+rssisav2g=0x7
+triso2g=0
+noise_cal_enable_2g=0
+noise_cal_po_2g=0
+swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
+temp_add=29767
+temp_mult=425
+
+btc_flags=0x6
+btc_params0=5000
+btc_params1=1000
+btc_params6=63

diff --git a/config/rootfiles/common/armv5tel/initscripts b/config/rootfiles/common/armv5tel/initscripts
index 980441599ec703d158feed8e74cbddf3b5c33077..60ef0ef19c9089375a75ee1790ec8319d0f0c6a2 100644 (file)
--- a/config/rootfiles/common/armv5tel/initscripts
+++ b/config/rootfiles/common/armv5tel/initscripts
@@ -117,6 +117,7 @@ etc/rc.d/init.d/sshd
 etc/rc.d/init.d/static-routes
 #etc/rc.d/init.d/stunnel
 etc/rc.d/init.d/swap
+etc/rc.d/init.d/swconfig
 etc/rc.d/init.d/sysctl
 etc/rc.d/init.d/sysklogd
 etc/rc.d/init.d/teamspeak
@@ -223,6 +224,7 @@ etc/rc.d/rcsysinit.d/S45udev_retry
 etc/rc.d/rcsysinit.d/S50cleanfs
 etc/rc.d/rcsysinit.d/S60setclock
 etc/rc.d/rcsysinit.d/S70console
+etc/rc.d/rcsysinit.d/S73swconfig
 etc/rc.d/rcsysinit.d/S75firstsetup
 etc/rc.d/rcsysinit.d/S80localnet
 etc/rc.d/rcsysinit.d/S85firewall

diff --git a/config/rootfiles/common/armv5tel/linux-kirkwood b/config/rootfiles/common/armv5tel/linux-kirkwood
index 50ac43471b66c588c34a86d798a9633c931f0bb5..f5ae58567f7b66fe8b9fb9efdb90c7e271c7bfa6 100644 (file)
--- a/config/rootfiles/common/armv5tel/linux-kirkwood
+++ b/config/rootfiles/common/armv5tel/linux-kirkwood
@@ -548,6 +548,8 @@ lib/modules/KVER-ipfire-kirkwood
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/common/siano/smsdvb.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/common/siano/smsmdtv.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/common/tveeprom.ko
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/dvb-core
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/dvb-core/dvb-core.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/dvb-frontends
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/dvb-frontends/a8293.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/dvb-frontends/af9013.ko
@@ -649,6 +651,7 @@ lib/modules/KVER-ipfire-kirkwood
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/i2c/cs53l32a.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/i2c/cx25840
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/i2c/cx25840/cx25840.ko
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/i2c/ir-kbd-i2c.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/i2c/m52790.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/i2c/msp3400.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/i2c/mt9v011.ko
@@ -684,6 +687,7 @@ lib/modules/KVER-ipfire-kirkwood
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/i2c/vp27smpx.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/i2c/wm8739.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/i2c/wm8775.ko
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/media.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/pci
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/pci/b2c2
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/pci/b2c2/b2c2-flexcop-pci.ko
@@ -878,6 +882,7 @@ lib/modules/KVER-ipfire-kirkwood
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/rc/keymaps/rc-winfast.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/rc/lirc_dev.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/rc/mceusb.ko
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/rc/rc-core.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/rc/rc-loopback.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/rc/redrat3.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/rc/streamzap.ko
@@ -890,8 +895,10 @@ lib/modules/KVER-ipfire-kirkwood
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/fc2580.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/m88ts2022.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/max2165.ko
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/mc44s803.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/mt2060.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/mt2063.ko
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/mt20xx.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/mt2131.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/mt2266.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/mxl5005s.ko
@@ -900,8 +907,17 @@ lib/modules/KVER-ipfire-kirkwood
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/r820t.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/tda18212.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/tda18218.ko
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/tda18271.ko
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/tda827x.ko
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/tda8290.ko
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/tda9887.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/tua9001.ko
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/tuner-simple.ko
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/tuner-types.ko
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/tuner-xc2028.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/tuner_it913x.ko
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/xc4000.ko
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/tuners/xc5000.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/usb
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/usb/au0828
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/usb/au0828/au0828.ko
@@ -1049,6 +1065,8 @@ lib/modules/KVER-ipfire-kirkwood
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/usb/zr364xx/zr364xx.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/v4l2-core
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/v4l2-core/tuner.ko
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/v4l2-core/v4l2-common.ko
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/v4l2-core/v4l2-dv-timings.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/v4l2-core/v4l2-mem2mem.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/v4l2-core/videobuf-core.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/v4l2-core/videobuf-dma-contig.ko
@@ -1059,6 +1077,7 @@ lib/modules/KVER-ipfire-kirkwood
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/v4l2-core/videobuf2-dma-contig.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/v4l2-core/videobuf2-memops.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/v4l2-core/videobuf2-vmalloc.ko
+#lib/modules/KVER-ipfire-kirkwood/kernel/drivers/media/v4l2-core/videodev.ko
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/memstick
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/memstick/core
 #lib/modules/KVER-ipfire-kirkwood/kernel/drivers/memstick/core/memstick.ko

diff --git a/config/rootfiles/common/armv5tel/linux-multi b/config/rootfiles/common/armv5tel/linux-multi
index eee6ad22ce6a38b006cbcfcd663cb1f260f7926a..fa07629b8d1c309d8c0b43980293ef61156602f7 100644 (file)
--- a/config/rootfiles/common/armv5tel/linux-multi
+++ b/config/rootfiles/common/armv5tel/linux-multi
@@ -110,8 +110,10 @@ boot/dtb-KVER-ipfire-multi
 #boot/dtb-KVER-ipfire-multi/sun5i-a13-olinuxino.dtb
 #boot/dtb-KVER-ipfire-multi/sun6i-a31-colombus.dtb
 #boot/dtb-KVER-ipfire-multi/sun7i-a20-bananapi.dtb
+#boot/dtb-KVER-ipfire-multi/sun7i-a20-bananapro.dtb
 #boot/dtb-KVER-ipfire-multi/sun7i-a20-cubieboard2.dtb
 #boot/dtb-KVER-ipfire-multi/sun7i-a20-cubietruck.dtb
+#boot/dtb-KVER-ipfire-multi/sun7i-a20-lamobo-r1.dtb
 #boot/dtb-KVER-ipfire-multi/sun7i-a20-olinuxino-micro.dtb
 #boot/dtb-KVER-ipfire-multi/sun7i-a20-pcduino3.dtb
 #boot/dtb-KVER-ipfire-multi/vexpress-v2p-ca15-tc1.dtb
@@ -596,6 +598,8 @@ lib/modules/KVER-ipfire-multi
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/common/siano/smsdvb.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/common/siano/smsmdtv.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/common/tveeprom.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/dvb-core
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/dvb-core/dvb-core.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/dvb-frontends
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/dvb-frontends/a8293.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/dvb-frontends/af9013.ko
@@ -694,6 +698,7 @@ lib/modules/KVER-ipfire-multi
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/i2c/cs53l32a.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/i2c/cx25840
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/i2c/cx25840/cx25840.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/i2c/ir-kbd-i2c.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/i2c/m52790.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/i2c/msp3400.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/i2c/mt9v011.ko
@@ -728,6 +733,7 @@ lib/modules/KVER-ipfire-multi
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/i2c/vp27smpx.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/i2c/wm8739.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/i2c/wm8775.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/media.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/pci
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/pci/b2c2
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/pci/b2c2/b2c2-flexcop-pci.ko
@@ -793,6 +799,8 @@ lib/modules/KVER-ipfire-multi
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/pci/ttpci/ttpci-eeprom.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/platform
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/platform/m2m-deinterlace.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/platform/omap
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/platform/omap/omap-vout.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/platform/sh_veu.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/platform/soc_camera
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/platform/soc_camera/mx3_camera.ko
@@ -925,6 +933,7 @@ lib/modules/KVER-ipfire-multi
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/rc/keymaps/rc-winfast.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/rc/lirc_dev.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/rc/mceusb.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/rc/rc-core.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/rc/rc-loopback.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/rc/redrat3.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/rc/streamzap.ko
@@ -938,8 +947,10 @@ lib/modules/KVER-ipfire-multi
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/fc2580.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/m88ts2022.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/max2165.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/mc44s803.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/mt2060.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/mt2063.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/mt20xx.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/mt2131.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/mt2266.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/mxl5005s.ko
@@ -948,8 +959,17 @@ lib/modules/KVER-ipfire-multi
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/r820t.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/tda18212.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/tda18218.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/tda18271.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/tda827x.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/tda8290.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/tda9887.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/tua9001.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/tuner-simple.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/tuner-types.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/tuner-xc2028.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/tuner_it913x.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/xc4000.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/tuners/xc5000.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/usb
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/usb/au0828
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/usb/au0828/au0828.ko
@@ -1092,7 +1112,11 @@ lib/modules/KVER-ipfire-multi
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/usb/zr364xx/zr364xx.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/v4l2-core
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/v4l2-core/tuner.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/v4l2-core/v4l2-common.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/v4l2-core/v4l2-dv-timings.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/v4l2-core/v4l2-mem2mem.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/v4l2-core/videobuf-core.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/v4l2-core/videobuf-dma-contig.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/v4l2-core/videobuf-dma-sg.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/v4l2-core/videobuf-dvb.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/v4l2-core/videobuf-vmalloc.ko
@@ -1100,6 +1124,7 @@ lib/modules/KVER-ipfire-multi
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/v4l2-core/videobuf2-dma-contig.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/v4l2-core/videobuf2-memops.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/media/v4l2-core/videobuf2-vmalloc.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/media/v4l2-core/videodev.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/memstick
 #lib/modules/KVER-ipfire-multi/kernel/drivers/memstick/core
 #lib/modules/KVER-ipfire-multi/kernel/drivers/memstick/core/memstick.ko
@@ -1261,8 +1286,6 @@ lib/modules/KVER-ipfire-multi
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/ethernet/jme.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/ethernet/marvell
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/ethernet/marvell/mv643xx_eth.ko
-#lib/modules/KVER-ipfire-multi/kernel/drivers/net/ethernet/marvell/mvmdio.ko
-#lib/modules/KVER-ipfire-multi/kernel/drivers/net/ethernet/marvell/mvneta.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/ethernet/marvell/skge.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/ethernet/marvell/sky2.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/ethernet/mellanox
@@ -1352,6 +1375,9 @@ lib/modules/KVER-ipfire-multi
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/amd.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/at803x.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/b53
+#lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/b53/b53_common.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/b53/b53_mdio.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/bcm87xx.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/broadcom.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/cicada.ko
@@ -1362,6 +1388,7 @@ lib/modules/KVER-ipfire-multi
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/lxt.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/marvell.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/mdio-bitbang.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/mdio-gpio.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/mdio-mux-gpio.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/mdio-mux-mmioreg.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/mdio-mux.ko
@@ -1372,6 +1399,7 @@ lib/modules/KVER-ipfire-multi
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/realtek.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/smsc.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/ste10Xp.ko
+#lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/swconfig.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/phy/vitesse.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/ppp
 #lib/modules/KVER-ipfire-multi/kernel/drivers/net/ppp/bsd_comp.ko
@@ -1605,7 +1633,6 @@ lib/modules/KVER-ipfire-multi
 #lib/modules/KVER-ipfire-multi/kernel/drivers/rtc/rtc-max6900.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/rtc/rtc-moxart.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/rtc/rtc-msm6242.ko
-#lib/modules/KVER-ipfire-multi/kernel/drivers/rtc/rtc-mv.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/rtc/rtc-mxc.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/rtc/rtc-pcf2127.ko
 #lib/modules/KVER-ipfire-multi/kernel/drivers/rtc/rtc-pcf8523.ko
@@ -2684,4 +2711,5 @@ lib/modules/KVER-ipfire-multi
 #lib/modules/KVER-ipfire-multi/modules.symbols
 #lib/modules/KVER-ipfire-multi/modules.symbols.bin
 #lib/modules/KVER-ipfire-multi/source
+usr/include/linux/switch.h
 boot/uInit-ipfire-multi

diff --git a/config/rootfiles/common/armv5tel/linux-rpi b/config/rootfiles/common/armv5tel/linux-rpi
index ee74ac3452c7fb4c672ea8de6f4d08f2e11b9df7..dbde8c05b83e1e61a91fc2033c354600c8e18e79 100644 (file)
--- a/config/rootfiles/common/armv5tel/linux-rpi
+++ b/config/rootfiles/common/armv5tel/linux-rpi
@@ -778,6 +778,7 @@ lib/modules/KVER-ipfire-rpi
 #lib/modules/KVER-ipfire-rpi/kernel/drivers/net/ifb.ko
 #lib/modules/KVER-ipfire-rpi/kernel/drivers/net/imq.ko
 #lib/modules/KVER-ipfire-rpi/kernel/drivers/net/macvlan.ko
+#lib/modules/KVER-ipfire-rpi/kernel/drivers/net/mii.ko
 #lib/modules/KVER-ipfire-rpi/kernel/drivers/net/netconsole.ko
 #lib/modules/KVER-ipfire-rpi/kernel/drivers/net/phy
 #lib/modules/KVER-ipfire-rpi/kernel/drivers/net/phy/libphy.ko
@@ -824,8 +825,10 @@ lib/modules/KVER-ipfire-rpi
 #lib/modules/KVER-ipfire-rpi/kernel/drivers/net/usb/rtl8150.ko
 #lib/modules/KVER-ipfire-rpi/kernel/drivers/net/usb/sierra_net.ko
 #lib/modules/KVER-ipfire-rpi/kernel/drivers/net/usb/smsc75xx.ko
+#lib/modules/KVER-ipfire-rpi/kernel/drivers/net/usb/smsc95xx.ko
 #lib/modules/KVER-ipfire-rpi/kernel/drivers/net/usb/sr9700.ko
 #lib/modules/KVER-ipfire-rpi/kernel/drivers/net/usb/sr9800.ko
+#lib/modules/KVER-ipfire-rpi/kernel/drivers/net/usb/usbnet.ko
 #lib/modules/KVER-ipfire-rpi/kernel/drivers/net/usb/zaurus.ko
 #lib/modules/KVER-ipfire-rpi/kernel/drivers/net/veth.ko
 #lib/modules/KVER-ipfire-rpi/kernel/drivers/net/wireless

diff --git a/config/rootfiles/common/armv5tel/swconfig b/config/rootfiles/common/armv5tel/swconfig
new file mode 100644 (file)
index 0000000..720791e
--- /dev/null
+++ b/config/rootfiles/common/armv5tel/swconfig
@@ -0,0 +1 @@
+usr/bin/swconfig

diff --git a/config/rootfiles/common/armv5tel/u-boot b/config/rootfiles/common/armv5tel/u-boot
index b139d7e732a416475e9bf41e07a6374517ade9c6..a31e3cfbd6229db08924fdfd4a216d2a443a693b 100644 (file)
--- a/config/rootfiles/common/armv5tel/u-boot
+++ b/config/rootfiles/common/armv5tel/u-boot
@@ -1,16 +1,16 @@
 #boot/MLO
-boot/boot.scr
-boot/boot.script
-boot/convert_bootscript
 #boot/u-boot.img
+boot/uEnv.txt
 usr/bin/mkimage
 #usr/share/u-boot
+#usr/share/u-boot/banana_pi
+usr/share/u-boot/banana_pi/u-boot-sunxi-with-spl.bin
 #usr/share/u-boot/pandaboard
-#usr/share/u-boot/pandaboard/MLO
-#usr/share/u-boot/pandaboard/u-boot.img
+usr/share/u-boot/pandaboard/MLO
+usr/share/u-boot/pandaboard/u-boot.img
 #usr/share/u-boot/wandboard_dl
-#usr/share/u-boot/wandboard_dl/u-boot.imx
+usr/share/u-boot/wandboard_dl/u-boot.imx
 #usr/share/u-boot/wandboard_quad
-#usr/share/u-boot/wandboard_quad/u-boot.imx
+usr/share/u-boot/wandboard_quad/u-boot.imx
 #usr/share/u-boot/wandboard_solo
-#usr/share/u-boot/wandboard_solo/u-boot.imx
+usr/share/u-boot/wandboard_solo/u-boot.imx

diff --git a/config/rootfiles/common/armv5tel/util-linux b/config/rootfiles/common/armv5tel/util-linux
index 0f364095085cba5a61df472ba657a401b4468b5c..2675dd0a8fb4b15ec6a35c8f3675d212dd636655 100644 (file)
--- a/config/rootfiles/common/armv5tel/util-linux
+++ b/config/rootfiles/common/armv5tel/util-linux
@@ -74,7 +74,7 @@ usr/bin/renice
 #usr/bin/setarch
 usr/bin/setsid
 #usr/bin/setterm
-#usr/bin/tailf
+usr/bin/tailf
 #usr/bin/taskset
 #usr/bin/ul
 #usr/bin/unshare

diff --git a/config/rootfiles/common/crda b/config/rootfiles/common/crda
index 23c2ad082852c7020182983af1b9bc371f7412da..1e6f6025a496c305bc67997f411c5d8846482e15 100644 (file)
--- a/config/rootfiles/common/crda
+++ b/config/rootfiles/common/crda
@@ -3,10 +3,12 @@ lib/udev/rules.d/85-regulatory.rules
 #root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-MACHINE.egg-tmp
 #root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-MACHINE.egg-tmp/M2Crypto
 #root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-MACHINE.egg-tmp/M2Crypto/__m2crypto.so
-#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-i686.egg-tmp
-#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-i686.egg-tmp/M2Crypto
-#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-i686.egg-tmp/M2Crypto/__m2crypto.so
 sbin/crda
 sbin/regdbdump
+#usr/include/reglib
+#usr/include/reglib/nl80211.h
+#usr/include/reglib/regdb.h
+#usr/include/reglib/reglib.h
+usr/lib/libreg.so
 #usr/share/man/man8/crda.8.gz
 #usr/share/man/man8/regdbdump.8.gz

diff --git a/config/rootfiles/common/dvb-firmwares b/config/rootfiles/common/dvb-firmwares
index 53dec979f7262857144289dea32182d65bc64f57..e9ec940c5de99035c89c951ff72a652b7ce136b7 100644 (file)
--- a/config/rootfiles/common/dvb-firmwares
+++ b/config/rootfiles/common/dvb-firmwares
@@ -1,4 +1,7 @@
 lib/firmware/dvb-fe-bcm3510-01.fw
+lib/firmware/dvb-fe-drxj-mc-1.0.8.fw
+lib/firmware/dvb-fe-drxj-mc-vsb-1.0.8.fw
+lib/firmware/dvb-fe-drxj-mc-vsb-qam-1.0.8.fw
 lib/firmware/dvb-fe-or51132-qam.fw
 lib/firmware/dvb-fe-or51132-vsb.fw
 lib/firmware/dvb-fe-or51211.fw
@@ -21,4 +24,4 @@ lib/firmware/dvb-usb-vp702x-01.fw
 lib/firmware/dvb-usb-vp7045-01.fw
 lib/firmware/dvb-usb-wt220u-01.fw
 lib/firmware/dvb-usb-wt220u-02.fw
-lib/firmware/v4l-cx23885-enc.fw
+lib/firmware/v4l-cx23885-enc-broken.fw

diff --git a/config/rootfiles/common/i586/util-linux b/config/rootfiles/common/i586/util-linux
index 34c87f27694e6a69727a65ae40588d53c9368cc1..9b8d484e3c565590806e09038e8a68a9eafc7cf9 100644 (file)
--- a/config/rootfiles/common/i586/util-linux
+++ b/config/rootfiles/common/i586/util-linux
@@ -75,7 +75,7 @@ usr/bin/renice
 #usr/bin/setarch
 usr/bin/setsid
 #usr/bin/setterm
-#usr/bin/tailf
+usr/bin/tailf
 #usr/bin/taskset
 #usr/bin/ul
 #usr/bin/unshare

diff --git a/config/rootfiles/common/installer b/config/rootfiles/common/installer
index a0cb093434f75794bab247a158419483e10711ca..72845214e024dc2e9f8d5c1abe95c9c690293b49 100644 (file)
--- a/config/rootfiles/common/installer
+++ b/config/rootfiles/common/installer
@@ -1,7 +1,7 @@
 #usr/bin/downloadsource.sh
 #usr/bin/execute-postinstall.sh
-#usr/bin/start-networking.sh
 #usr/bin/installer
+#usr/bin/start-networking.sh
 #usr/lib/dracut/modules.d/99installer
 #usr/lib/dracut/modules.d/99installer/70-dhcpcd.exe
 #usr/lib/dracut/modules.d/99installer/fake-root.sh
@@ -16,10 +16,13 @@
 #usr/share/locale/es/LC_MESSAGES/installer.mo
 #usr/share/locale/fa/LC_MESSAGES/installer.mo
 #usr/share/locale/fr/LC_MESSAGES/installer.mo
+#usr/share/locale/hr/LC_MESSAGES/installer.mo
 #usr/share/locale/hu/LC_MESSAGES/installer.mo
 #usr/share/locale/id/LC_MESSAGES/installer.mo
 #usr/share/locale/it/LC_MESSAGES/installer.mo
 #usr/share/locale/ja/LC_MESSAGES/installer.mo
+#usr/share/locale/ja_JP/LC_MESSAGES/installer.mo
+#usr/share/locale/jv/LC_MESSAGES/installer.mo
 #usr/share/locale/km_KH/LC_MESSAGES/installer.mo
 #usr/share/locale/nl/LC_MESSAGES/installer.mo
 #usr/share/locale/pl/LC_MESSAGES/installer.mo
@@ -27,8 +30,12 @@
 #usr/share/locale/pt_PT/LC_MESSAGES/installer.mo
 #usr/share/locale/ro_RO/LC_MESSAGES/installer.mo
 #usr/share/locale/ru/LC_MESSAGES/installer.mo
+#usr/share/locale/ru_RU/LC_MESSAGES/installer.mo
+#usr/share/locale/rw/LC_MESSAGES/installer.mo
 #usr/share/locale/sk/LC_MESSAGES/installer.mo
 #usr/share/locale/sq/LC_MESSAGES/installer.mo
+#usr/share/locale/sr/LC_MESSAGES/installer.mo
+#usr/share/locale/su/LC_MESSAGES/installer.mo
 #usr/share/locale/sv/LC_MESSAGES/installer.mo
 #usr/share/locale/th/LC_MESSAGES/installer.mo
 #usr/share/locale/tk/LC_MESSAGES/installer.mo

diff --git a/config/rootfiles/common/kbd b/config/rootfiles/common/kbd
index 7b6ccc358c18597fe5625ca054e0f5802e264ade..5f694ff0c900070fcb661fa8baf9e1e9402704ec 100644 (file)
--- a/config/rootfiles/common/kbd
+++ b/config/rootfiles/common/kbd
@@ -137,6 +137,7 @@ lib/kbd/consolefonts/iso07u-16.psfu.gz
 #lib/kbd/consolefonts/lat0-12.psfu.gz
 #lib/kbd/consolefonts/lat0-14.psfu.gz
 lib/kbd/consolefonts/lat0-16.psfu.gz
+lib/kbd/consolefonts/lat0-sun16.psfu.gz
 #lib/kbd/consolefonts/lat1-08.psfu.gz
 #lib/kbd/consolefonts/lat1-10.psfu.gz
 #lib/kbd/consolefonts/lat1-12.psfu.gz
@@ -147,6 +148,7 @@ lib/kbd/consolefonts/lat1-16.psfu.gz
 #lib/kbd/consolefonts/lat2-12.psfu.gz
 #lib/kbd/consolefonts/lat2-14.psfu.gz
 lib/kbd/consolefonts/lat2-16.psfu.gz
+lib/kbd/consolefonts/lat2-sun16.psfu.gz
 #lib/kbd/consolefonts/lat2a-16.psfu.gz
 #lib/kbd/consolefonts/lat4-08.psfu.gz
 #lib/kbd/consolefonts/lat4-10.psfu.gz
@@ -188,6 +190,7 @@ lib/kbd/consolefonts/lat5-16.psfu.gz
 #lib/kbd/consolefonts/lat9w-12.psfu.gz
 #lib/kbd/consolefonts/lat9w-14.psfu.gz
 #lib/kbd/consolefonts/lat9w-16.psfu.gz
+lib/kbd/consolefonts/latarcyrheb-sun16.psfu.gz
 #lib/kbd/consolefonts/partialfonts
 #lib/kbd/consolefonts/partialfonts/8859-1.a0-ff.08.gz
 #lib/kbd/consolefonts/partialfonts/8859-1.a0-ff.14.gz

diff --git a/config/rootfiles/common/linux-firmware b/config/rootfiles/common/linux-firmware
index d828b8dced63a1a107645b5448a5399e4dad0c76..a8839997be4e5c28242f6eb73f3b15936181b062 100644 (file)
--- a/config/rootfiles/common/linux-firmware
+++ b/config/rootfiles/common/linux-firmware
@@ -2,6 +2,8 @@
 lib/firmware/3com/3C359.bin
 lib/firmware/3com/typhoon.bin
 lib/firmware/GPL-3
+lib/firmware/LICENCE.Abilis
+lib/firmware/LICENCE.IntcSST2
 lib/firmware/LICENCE.Marvell
 lib/firmware/LICENCE.OLPC
 lib/firmware/LICENCE.agere
@@ -11,23 +13,30 @@ lib/firmware/LICENCE.ca0132
 lib/firmware/LICENCE.chelsio_firmware
 lib/firmware/LICENCE.cw1200
 lib/firmware/LICENCE.ene_firmware
+lib/firmware/LICENCE.fw_sst_0f28
 lib/firmware/LICENCE.go7007
 lib/firmware/LICENCE.i2400m
 lib/firmware/LICENCE.ibt_firmware
+lib/firmware/LICENCE.it913x
 lib/firmware/LICENCE.iwlwifi_firmware
 lib/firmware/LICENCE.mwl8335
 lib/firmware/LICENCE.myri10ge_firmware
 lib/firmware/LICENCE.phanfw
+lib/firmware/LICENCE.qat_dh895xcc_firmware
 lib/firmware/LICENCE.qla2xxx
+lib/firmware/LICENCE.r8a779x_usb3
 lib/firmware/LICENCE.ralink-firmware.txt
 lib/firmware/LICENCE.ralink_a_mediatek_company_firmware
 lib/firmware/LICENCE.rtlwifi_firmware.txt
+lib/firmware/LICENCE.siano
 lib/firmware/LICENCE.tda7706-firmware.txt
 lib/firmware/LICENCE.ti-connectivity
 lib/firmware/LICENCE.ueagle-atm4-firmware
 lib/firmware/LICENCE.via_vt6656
 lib/firmware/LICENCE.wl1251
+lib/firmware/LICENCE.xc4000
 lib/firmware/LICENCE.xc5000
+lib/firmware/LICENCE.xc5000c
 lib/firmware/LICENSE.amd-ucode
 lib/firmware/LICENSE.dib0700
 lib/firmware/LICENSE.radeon
@@ -58,6 +67,8 @@ lib/firmware/amd-ucode/microcode_amd.bin
 lib/firmware/amd-ucode/microcode_amd.bin.asc
 lib/firmware/amd-ucode/microcode_amd_fam15h.bin
 lib/firmware/amd-ucode/microcode_amd_fam15h.bin.asc
+lib/firmware/amd-ucode/microcode_amd_fam16h.bin
+lib/firmware/amd-ucode/microcode_amd_fam16h.bin.asc
 #lib/firmware/ar3k
 #lib/firmware/ar3k/1020200
 lib/firmware/ar3k/1020200/PS_ASIC.pst
@@ -100,6 +111,8 @@ lib/firmware/ar7010_1_1.fw
 lib/firmware/ar9170-1.fw
 lib/firmware/ar9170-2.fw
 lib/firmware/ar9271.fw
+lib/firmware/as102_data1_st.hex
+lib/firmware/as102_data2_st.hex
 lib/firmware/ath3k-1.fw
 #lib/firmware/ath6k
 #lib/firmware/ath6k/AR6002
@@ -191,9 +204,11 @@ lib/firmware/bnx2x/bnx2x-e1-6.2.9.0.fw
 lib/firmware/bnx2x/bnx2x-e1-7.0.20.0.fw
 lib/firmware/bnx2x/bnx2x-e1-7.0.23.0.fw
 lib/firmware/bnx2x/bnx2x-e1-7.0.29.0.fw
+lib/firmware/bnx2x/bnx2x-e1-7.10.51.0.fw
 lib/firmware/bnx2x/bnx2x-e1-7.2.16.0.fw
 lib/firmware/bnx2x/bnx2x-e1-7.2.51.0.fw
 lib/firmware/bnx2x/bnx2x-e1-7.8.17.0.fw
+lib/firmware/bnx2x/bnx2x-e1-7.8.19.0.fw
 lib/firmware/bnx2x/bnx2x-e1-7.8.2.0.fw
 lib/firmware/bnx2x/bnx2x-e1h-6.0.34.0.fw
 lib/firmware/bnx2x/bnx2x-e1h-6.2.5.0.fw
@@ -201,9 +216,11 @@ lib/firmware/bnx2x/bnx2x-e1h-6.2.9.0.fw
 lib/firmware/bnx2x/bnx2x-e1h-7.0.20.0.fw
 lib/firmware/bnx2x/bnx2x-e1h-7.0.23.0.fw
 lib/firmware/bnx2x/bnx2x-e1h-7.0.29.0.fw
+lib/firmware/bnx2x/bnx2x-e1h-7.10.51.0.fw
 lib/firmware/bnx2x/bnx2x-e1h-7.2.16.0.fw
 lib/firmware/bnx2x/bnx2x-e1h-7.2.51.0.fw
 lib/firmware/bnx2x/bnx2x-e1h-7.8.17.0.fw
+lib/firmware/bnx2x/bnx2x-e1h-7.8.19.0.fw
 lib/firmware/bnx2x/bnx2x-e1h-7.8.2.0.fw
 lib/firmware/bnx2x/bnx2x-e2-6.0.34.0.fw
 lib/firmware/bnx2x/bnx2x-e2-6.2.5.0.fw
@@ -211,14 +228,18 @@ lib/firmware/bnx2x/bnx2x-e2-6.2.9.0.fw
 lib/firmware/bnx2x/bnx2x-e2-7.0.20.0.fw
 lib/firmware/bnx2x/bnx2x-e2-7.0.23.0.fw
 lib/firmware/bnx2x/bnx2x-e2-7.0.29.0.fw
+lib/firmware/bnx2x/bnx2x-e2-7.10.51.0.fw
 lib/firmware/bnx2x/bnx2x-e2-7.2.16.0.fw
 lib/firmware/bnx2x/bnx2x-e2-7.2.51.0.fw
 lib/firmware/bnx2x/bnx2x-e2-7.8.17.0.fw
+lib/firmware/bnx2x/bnx2x-e2-7.8.19.0.fw
 lib/firmware/bnx2x/bnx2x-e2-7.8.2.0.fw
 #lib/firmware/brcm
 lib/firmware/brcm/bcm4329-fullmac-4.bin
 lib/firmware/brcm/bcm43xx-0.fw
 lib/firmware/brcm/bcm43xx_hdr-0.fw
+lib/firmware/brcm/brcmfmac43143-sdio.bin
+lib/firmware/brcm/brcmfmac43143.bin
 lib/firmware/brcm/brcmfmac43236b.bin
 lib/firmware/brcm/brcmfmac43241b0-sdio.bin
 lib/firmware/brcm/brcmfmac43241b4-sdio.bin
@@ -226,6 +247,8 @@ lib/firmware/brcm/brcmfmac4329-sdio.bin
 lib/firmware/brcm/brcmfmac4330-sdio.bin
 lib/firmware/brcm/brcmfmac4334-sdio.bin
 lib/firmware/brcm/brcmfmac4335-sdio.bin
+lib/firmware/brcm/brcmfmac43362-sdio.bin
+lib/firmware/brcm/brcmfmac4354-sdio.bin
 lib/firmware/carl9170-1.fw
 #lib/firmware/carl9170fw
 #lib/firmware/carl9170fw/CMakeLists.txt
@@ -391,6 +414,8 @@ lib/firmware/cis/src/PE520.cis
 lib/firmware/cis/src/RS-COM-2P.cis
 lib/firmware/cis/src/tamarack.cis
 lib/firmware/cis/tamarack.cis
+lib/firmware/cmmb_vega_12mhz.inp
+lib/firmware/cmmb_venice_12mhz.inp
 #lib/firmware/configure
 #lib/firmware/cpia2
 lib/firmware/cpia2/stv0672_vp4.bin
@@ -412,9 +437,9 @@ lib/firmware/cxgb3/t3fw-7.10.0.bin
 lib/firmware/cxgb3/t3fw-7.12.0.bin
 lib/firmware/cxgb3/t3fw-7.4.0.bin
 #lib/firmware/cxgb4
-lib/firmware/cxgb4/t4fw-1.9.23.0.bin
+lib/firmware/cxgb4/t4fw-1.12.25.0.bin
 lib/firmware/cxgb4/t4fw.bin
-lib/firmware/cxgb4/t5fw-1.9.23.0.bin
+lib/firmware/cxgb4/t5fw-1.12.25.0.bin
 lib/firmware/cxgb4/t5fw.bin
 #lib/firmware/dabusb
 lib/firmware/dabusb/bitstream.bin
@@ -424,9 +449,15 @@ lib/firmware/dabusb/firmware.fw
 #lib/firmware/dsp56k/bootstrap.asm
 lib/firmware/dsp56k/bootstrap.bin
 #lib/firmware/dsp56k/concat-bootstrap.pl
+lib/firmware/dvb-fe-xc4000-1.4.1.fw
 lib/firmware/dvb-fe-xc5000-1.6.114.fw
+lib/firmware/dvb-fe-xc5000c-4.1.30.7.fw
 lib/firmware/dvb-usb-dib0700-1.20.fw
+lib/firmware/dvb-usb-it9135-01.fw
+lib/firmware/dvb-usb-it9135-02.fw
 lib/firmware/dvb-usb-terratec-h5-drxk.fw
+lib/firmware/dvb_nova_12mhz.inp
+lib/firmware/dvb_nova_12mhz_b0.inp
 #lib/firmware/e100
 lib/firmware/e100/d101m_ucode.bin
 lib/firmware/e100/d101s_ucode.bin
@@ -472,9 +503,17 @@ lib/firmware/i2400m-fw-usb-1.4.sbcf
 lib/firmware/i2400m-fw-usb-1.5.sbcf
 lib/firmware/i6050-fw-usb-1.5.sbcf
 #lib/firmware/intel
+lib/firmware/intel/IntcSST2.bin
+lib/firmware/intel/fw_sst_0f28.bin
+lib/firmware/intel/fw_sst_0f28.bin-48kHz_i2s_master
+lib/firmware/intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq
 lib/firmware/intel/ibt-hw-37.7.10-fw-1.0.2.3.d.bseq
+lib/firmware/intel/ibt-hw-37.7.10-fw-1.80.1.2d.d.bseq
 lib/firmware/intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
 lib/firmware/intel/ibt-hw-37.7.bseq
+lib/firmware/intel/ibt-hw-37.8.10-fw-1.10.2.27.d.bseq
+lib/firmware/intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
+lib/firmware/intel/ibt-hw-37.8.bseq
 lib/firmware/intelliport2.bin
 #lib/firmware/isci
 #lib/firmware/isci/Makefile
@@ -483,6 +522,9 @@ lib/firmware/isci/README
 #lib/firmware/isci/create_fw.h
 lib/firmware/isci/isci_firmware.bin
 #lib/firmware/isci/probe_roms.h
+lib/firmware/isdbt_nova_12mhz.inp
+lib/firmware/isdbt_nova_12mhz_b0.inp
+lib/firmware/isdbt_rio.inp
 lib/firmware/iwlwifi-100-5.ucode
 lib/firmware/iwlwifi-1000-3.ucode
 lib/firmware/iwlwifi-1000-5.ucode
@@ -490,7 +532,10 @@ lib/firmware/iwlwifi-105-6.ucode
 lib/firmware/iwlwifi-135-6.ucode
 lib/firmware/iwlwifi-2000-6.ucode
 lib/firmware/iwlwifi-2030-6.ucode
+lib/firmware/iwlwifi-3160-10.ucode
 lib/firmware/iwlwifi-3160-7.ucode
+lib/firmware/iwlwifi-3160-8.ucode
+lib/firmware/iwlwifi-3160-9.ucode
 lib/firmware/iwlwifi-3945-2.ucode
 lib/firmware/iwlwifi-4965-2.ucode
 lib/firmware/iwlwifi-5000-1.ucode
@@ -504,7 +549,14 @@ lib/firmware/iwlwifi-6000g2b-5.ucode
 lib/firmware/iwlwifi-6000g2b-6.ucode
 lib/firmware/iwlwifi-6050-4.ucode
 lib/firmware/iwlwifi-6050-5.ucode
+lib/firmware/iwlwifi-7260-10.ucode
 lib/firmware/iwlwifi-7260-7.ucode
+lib/firmware/iwlwifi-7260-8.ucode
+lib/firmware/iwlwifi-7260-9.ucode
+lib/firmware/iwlwifi-7265-10.ucode
+lib/firmware/iwlwifi-7265-8.ucode
+lib/firmware/iwlwifi-7265-9.ucode
+lib/firmware/iwlwifi-7265D-10.ucode
 #lib/firmware/kaweth
 lib/firmware/kaweth/new_code.bin
 lib/firmware/kaweth/new_code_fix.bin
@@ -595,15 +647,20 @@ lib/firmware/mwl8k/fmimage_8687.fw
 lib/firmware/mwl8k/fmimage_8764_ap-1.fw
 lib/firmware/mwl8k/helper_8366.fw
 lib/firmware/mwl8k/helper_8687.fw
+lib/firmware/myri10ge_eth_big_z8e.dat
 lib/firmware/myri10ge_eth_z8e.dat
+lib/firmware/myri10ge_ethp_big_z8e.dat
 lib/firmware/myri10ge_ethp_z8e.dat
+lib/firmware/myri10ge_rss_eth_big_z8e.dat
 lib/firmware/myri10ge_rss_eth_z8e.dat
+lib/firmware/myri10ge_rss_ethp_big_z8e.dat
 lib/firmware/myri10ge_rss_ethp_z8e.dat
 #lib/firmware/myricom
 lib/firmware/myricom/lanai.bin
 #lib/firmware/ositech
 lib/firmware/ositech/Xilinx7OD.bin
 lib/firmware/phanfw.bin
+lib/firmware/qat_895xcc.bin
 lib/firmware/ql2100_fw.bin
 lib/firmware/ql2200_fw.bin
 lib/firmware/ql2300_fw.bin
@@ -618,6 +675,7 @@ lib/firmware/qlogic/isp1000.bin
 lib/firmware/qlogic/sd7220.fw
 #lib/firmware/r128
 lib/firmware/r128/r128_cce.bin
+lib/firmware/r8a779x_usb3_v1.dlmem
 #lib/firmware/radeon
 lib/firmware/radeon/ARUBA_me.bin
 lib/firmware/radeon/ARUBA_pfp.bin
@@ -628,6 +686,7 @@ lib/firmware/radeon/BARTS_pfp.bin
 lib/firmware/radeon/BARTS_smc.bin
 lib/firmware/radeon/BONAIRE_ce.bin
 lib/firmware/radeon/BONAIRE_mc.bin
+lib/firmware/radeon/BONAIRE_mc2.bin
 lib/firmware/radeon/BONAIRE_me.bin
 lib/firmware/radeon/BONAIRE_mec.bin
 lib/firmware/radeon/BONAIRE_pfp.bin
@@ -635,6 +694,7 @@ lib/firmware/radeon/BONAIRE_rlc.bin
 lib/firmware/radeon/BONAIRE_sdma.bin
 lib/firmware/radeon/BONAIRE_smc.bin
 lib/firmware/radeon/BONAIRE_uvd.bin
+lib/firmware/radeon/BONAIRE_vce.bin
 lib/firmware/radeon/BTC_rlc.bin
 lib/firmware/radeon/CAICOS_mc.bin
 lib/firmware/radeon/CAICOS_me.bin
@@ -656,10 +716,20 @@ lib/firmware/radeon/CYPRESS_smc.bin
 lib/firmware/radeon/CYPRESS_uvd.bin
 lib/firmware/radeon/HAINAN_ce.bin
 lib/firmware/radeon/HAINAN_mc.bin
+lib/firmware/radeon/HAINAN_mc2.bin
 lib/firmware/radeon/HAINAN_me.bin
 lib/firmware/radeon/HAINAN_pfp.bin
 lib/firmware/radeon/HAINAN_rlc.bin
 lib/firmware/radeon/HAINAN_smc.bin
+lib/firmware/radeon/HAWAII_ce.bin
+lib/firmware/radeon/HAWAII_mc.bin
+lib/firmware/radeon/HAWAII_mc2.bin
+lib/firmware/radeon/HAWAII_me.bin
+lib/firmware/radeon/HAWAII_mec.bin
+lib/firmware/radeon/HAWAII_pfp.bin
+lib/firmware/radeon/HAWAII_rlc.bin
+lib/firmware/radeon/HAWAII_sdma.bin
+lib/firmware/radeon/HAWAII_smc.bin
 lib/firmware/radeon/JUNIPER_me.bin
 lib/firmware/radeon/JUNIPER_pfp.bin
 lib/firmware/radeon/JUNIPER_rlc.bin
@@ -676,8 +746,15 @@ lib/firmware/radeon/KAVERI_mec.bin
 lib/firmware/radeon/KAVERI_pfp.bin
 lib/firmware/radeon/KAVERI_rlc.bin
 lib/firmware/radeon/KAVERI_sdma.bin
+lib/firmware/radeon/MULLINS_ce.bin
+lib/firmware/radeon/MULLINS_me.bin
+lib/firmware/radeon/MULLINS_mec.bin
+lib/firmware/radeon/MULLINS_pfp.bin
+lib/firmware/radeon/MULLINS_rlc.bin
+lib/firmware/radeon/MULLINS_sdma.bin
 lib/firmware/radeon/OLAND_ce.bin
 lib/firmware/radeon/OLAND_mc.bin
+lib/firmware/radeon/OLAND_mc2.bin
 lib/firmware/radeon/OLAND_me.bin
 lib/firmware/radeon/OLAND_pfp.bin
 lib/firmware/radeon/OLAND_rlc.bin
@@ -686,6 +763,7 @@ lib/firmware/radeon/PALM_me.bin
 lib/firmware/radeon/PALM_pfp.bin
 lib/firmware/radeon/PITCAIRN_ce.bin
 lib/firmware/radeon/PITCAIRN_mc.bin
+lib/firmware/radeon/PITCAIRN_mc2.bin
 lib/firmware/radeon/PITCAIRN_me.bin
 lib/firmware/radeon/PITCAIRN_pfp.bin
 lib/firmware/radeon/PITCAIRN_rlc.bin
@@ -698,6 +776,7 @@ lib/firmware/radeon/R520_cp.bin
 lib/firmware/radeon/R600_me.bin
 lib/firmware/radeon/R600_pfp.bin
 lib/firmware/radeon/R600_rlc.bin
+lib/firmware/radeon/R600_uvd.bin
 lib/firmware/radeon/R700_rlc.bin
 lib/firmware/radeon/REDWOOD_me.bin
 lib/firmware/radeon/REDWOOD_pfp.bin
@@ -707,6 +786,7 @@ lib/firmware/radeon/RS600_cp.bin
 lib/firmware/radeon/RS690_cp.bin
 lib/firmware/radeon/RS780_me.bin
 lib/firmware/radeon/RS780_pfp.bin
+lib/firmware/radeon/RS780_uvd.bin
 lib/firmware/radeon/RV610_me.bin
 lib/firmware/radeon/RV610_pfp.bin
 lib/firmware/radeon/RV620_me.bin
@@ -728,6 +808,7 @@ lib/firmware/radeon/RV740_smc.bin
 lib/firmware/radeon/RV770_me.bin
 lib/firmware/radeon/RV770_pfp.bin
 lib/firmware/radeon/RV770_smc.bin
+lib/firmware/radeon/RV770_uvd.bin
 lib/firmware/radeon/SUMO2_me.bin
 lib/firmware/radeon/SUMO2_pfp.bin
 lib/firmware/radeon/SUMO_me.bin
@@ -736,6 +817,7 @@ lib/firmware/radeon/SUMO_rlc.bin
 lib/firmware/radeon/SUMO_uvd.bin
 lib/firmware/radeon/TAHITI_ce.bin
 lib/firmware/radeon/TAHITI_mc.bin
+lib/firmware/radeon/TAHITI_mc2.bin
 lib/firmware/radeon/TAHITI_me.bin
 lib/firmware/radeon/TAHITI_pfp.bin
 lib/firmware/radeon/TAHITI_rlc.bin
@@ -747,11 +829,78 @@ lib/firmware/radeon/TURKS_pfp.bin
 lib/firmware/radeon/TURKS_smc.bin
 lib/firmware/radeon/VERDE_ce.bin
 lib/firmware/radeon/VERDE_mc.bin
+lib/firmware/radeon/VERDE_mc2.bin
 lib/firmware/radeon/VERDE_me.bin
 lib/firmware/radeon/VERDE_pfp.bin
 lib/firmware/radeon/VERDE_rlc.bin
 lib/firmware/radeon/VERDE_smc.bin
+lib/firmware/radeon/bonaire_ce.bin
+lib/firmware/radeon/bonaire_mc.bin
+lib/firmware/radeon/bonaire_me.bin
+lib/firmware/radeon/bonaire_mec.bin
+lib/firmware/radeon/bonaire_pfp.bin
+lib/firmware/radeon/bonaire_rlc.bin
+lib/firmware/radeon/bonaire_sdma.bin
+lib/firmware/radeon/bonaire_smc.bin
+lib/firmware/radeon/hainan_ce.bin
+lib/firmware/radeon/hainan_mc.bin
+lib/firmware/radeon/hainan_me.bin
+lib/firmware/radeon/hainan_pfp.bin
+lib/firmware/radeon/hainan_rlc.bin
+lib/firmware/radeon/hainan_smc.bin
+lib/firmware/radeon/hawaii_ce.bin
+lib/firmware/radeon/hawaii_mc.bin
+lib/firmware/radeon/hawaii_me.bin
+lib/firmware/radeon/hawaii_mec.bin
+lib/firmware/radeon/hawaii_pfp.bin
+lib/firmware/radeon/hawaii_rlc.bin
+lib/firmware/radeon/hawaii_sdma.bin
+lib/firmware/radeon/hawaii_smc.bin
+lib/firmware/radeon/kabini_ce.bin
+lib/firmware/radeon/kabini_me.bin
+lib/firmware/radeon/kabini_mec.bin
+lib/firmware/radeon/kabini_pfp.bin
+lib/firmware/radeon/kabini_rlc.bin
+lib/firmware/radeon/kabini_sdma.bin
+lib/firmware/radeon/kaveri_ce.bin
+lib/firmware/radeon/kaveri_me.bin
+lib/firmware/radeon/kaveri_mec.bin
+lib/firmware/radeon/kaveri_mec2.bin
+lib/firmware/radeon/kaveri_pfp.bin
+lib/firmware/radeon/kaveri_rlc.bin
+lib/firmware/radeon/kaveri_sdma.bin
+lib/firmware/radeon/mullins_ce.bin
+lib/firmware/radeon/mullins_me.bin
+lib/firmware/radeon/mullins_mec.bin
+lib/firmware/radeon/mullins_pfp.bin
+lib/firmware/radeon/mullins_rlc.bin
+lib/firmware/radeon/mullins_sdma.bin
+lib/firmware/radeon/oland_ce.bin
+lib/firmware/radeon/oland_mc.bin
+lib/firmware/radeon/oland_me.bin
+lib/firmware/radeon/oland_pfp.bin
+lib/firmware/radeon/oland_rlc.bin
+lib/firmware/radeon/oland_smc.bin
+lib/firmware/radeon/pitcairn_ce.bin
+lib/firmware/radeon/pitcairn_mc.bin
+lib/firmware/radeon/pitcairn_me.bin
+lib/firmware/radeon/pitcairn_pfp.bin
+lib/firmware/radeon/pitcairn_rlc.bin
+lib/firmware/radeon/pitcairn_smc.bin
+lib/firmware/radeon/tahiti_ce.bin
+lib/firmware/radeon/tahiti_mc.bin
+lib/firmware/radeon/tahiti_me.bin
+lib/firmware/radeon/tahiti_pfp.bin
+lib/firmware/radeon/tahiti_rlc.bin
+lib/firmware/radeon/tahiti_smc.bin
+lib/firmware/radeon/verde_ce.bin
+lib/firmware/radeon/verde_mc.bin
+lib/firmware/radeon/verde_me.bin
+lib/firmware/radeon/verde_pfp.bin
+lib/firmware/radeon/verde_rlc.bin
+lib/firmware/radeon/verde_smc.bin
 lib/firmware/rp2.fw
+lib/firmware/rsi_91x.fw
 lib/firmware/rt2561.bin
 lib/firmware/rt2561s.bin
 lib/firmware/rt2661.bin
@@ -766,6 +915,8 @@ lib/firmware/rt73.bin
 lib/firmware/rtl_nic/rtl8105e-1.fw
 lib/firmware/rtl_nic/rtl8106e-1.fw
 lib/firmware/rtl_nic/rtl8106e-2.fw
+lib/firmware/rtl_nic/rtl8107e-1.fw
+lib/firmware/rtl_nic/rtl8107e-2.fw
 lib/firmware/rtl_nic/rtl8168d-1.fw
 lib/firmware/rtl_nic/rtl8168d-2.fw
 lib/firmware/rtl_nic/rtl8168e-1.fw
@@ -776,6 +927,8 @@ lib/firmware/rtl_nic/rtl8168f-2.fw
 lib/firmware/rtl_nic/rtl8168g-1.fw
 lib/firmware/rtl_nic/rtl8168g-2.fw
 lib/firmware/rtl_nic/rtl8168g-3.fw
+lib/firmware/rtl_nic/rtl8168h-1.fw
+lib/firmware/rtl_nic/rtl8168h-2.fw
 lib/firmware/rtl_nic/rtl8402-1.fw
 lib/firmware/rtl_nic/rtl8411-1.fw
 lib/firmware/rtl_nic/rtl8411-2.fw
@@ -790,15 +943,24 @@ lib/firmware/rtlwifi/rtl8192cufw_A.bin
 lib/firmware/rtlwifi/rtl8192cufw_B.bin
 lib/firmware/rtlwifi/rtl8192cufw_TMSC.bin
 lib/firmware/rtlwifi/rtl8192defw.bin
+lib/firmware/rtlwifi/rtl8192eefw.bin
 lib/firmware/rtlwifi/rtl8192sefw.bin
 lib/firmware/rtlwifi/rtl8712u.bin
+lib/firmware/rtlwifi/rtl8723aufw_A.bin
+lib/firmware/rtlwifi/rtl8723aufw_B.bin
+lib/firmware/rtlwifi/rtl8723aufw_B_NoBT.bin
+lib/firmware/rtlwifi/rtl8723befw.bin
 lib/firmware/rtlwifi/rtl8723fw.bin
 lib/firmware/rtlwifi/rtl8723fw_B.bin
+lib/firmware/rtlwifi/rtl8821aefw.bin
+lib/firmware/rtlwifi/rtl8821aefw_wowlan.bin
 lib/firmware/s2250.fw
 lib/firmware/s2250_loader.fw
-lib/firmware/s5p-mfc
-lib/firmware/s5p-mfc/s5p-mfc-v6.fw
-lib/firmware/s5p-mfc/s5p-mfc.fw
+lib/firmware/s5p-mfc-v6-v2.fw
+lib/firmware/s5p-mfc-v6.fw
+lib/firmware/s5p-mfc-v7.fw
+lib/firmware/s5p-mfc-v8.fw
+lib/firmware/s5p-mfc.fw
 #lib/firmware/sb16
 lib/firmware/sb16/alaw_main.csp
 lib/firmware/sb16/ima_adpcm_capture.csp
@@ -812,11 +974,17 @@ lib/firmware/slicoss/gbrcvucode.sys
 lib/firmware/slicoss/oasisdbgdownload.sys
 lib/firmware/slicoss/oasisdownload.sys
 lib/firmware/slicoss/oasisrcvucode.sys
+lib/firmware/sms1xxx-hcw-55xxx-dvbt-02.fw
+lib/firmware/sms1xxx-hcw-55xxx-isdbt-02.fw
+lib/firmware/sms1xxx-nova-a-dvbt-01.fw
+lib/firmware/sms1xxx-nova-b-dvbt-01.fw
+lib/firmware/sms1xxx-stellar-dvbt-01.fw
 #lib/firmware/sun
 lib/firmware/sun/cassini.bin
 #lib/firmware/sxg
 lib/firmware/sxg/saharadbgdownloadB.sys
 lib/firmware/sxg/saharadownloadB.sys
+lib/firmware/tdmb_nova_12mhz.inp
 #lib/firmware/tehuti
 lib/firmware/tehuti/bdx.bin
 #lib/firmware/ti-connectivity
@@ -850,6 +1018,8 @@ lib/firmware/ti-connectivity/wl128x-nvs.bin
 lib/firmware/ti-connectivity/wl12xx-nvs.bin
 lib/firmware/ti-connectivity/wl18xx-conf.bin
 lib/firmware/ti-connectivity/wl18xx-fw-2.bin
+lib/firmware/ti-connectivity/wl18xx-fw-3.bin
+lib/firmware/ti-connectivity/wl18xx-fw-4.bin
 lib/firmware/ti-connectivity/wl18xx-fw.bin
 lib/firmware/ti_3410.fw
 lib/firmware/ti_5052.fw

diff --git a/config/rootfiles/common/ntp b/config/rootfiles/common/ntp
index 883d4ff7ded74e3c1a95bd491575dcc0fbe9e557..aacdb25a48f7f72764d6302be05ed0cc3c68047b 100644 (file)
--- a/config/rootfiles/common/ntp
+++ b/config/rootfiles/common/ntp
@@ -3,6 +3,7 @@ etc/ntp.conf
 etc/rc.d/rc0.d/K46ntpd
 etc/rc.d/rc3.d/S26ntpd
 etc/rc.d/rc6.d/K46ntpd
+usr/bin/calc_tickadj
 usr/bin/ntp-keygen
 usr/bin/ntp-wait
 usr/bin/ntpd
@@ -13,12 +14,273 @@ usr/bin/ntptime
 usr/bin/ntptrace
 usr/bin/sntp
 usr/bin/tickadj
+#usr/include/event2
+#usr/share/doc/ntp4
+#usr/share/doc/ntp4/html
+#usr/share/doc/ntp4/html/access.html
+#usr/share/doc/ntp4/html/accopt.html
+#usr/share/doc/ntp4/html/assoc.html
+#usr/share/doc/ntp4/html/audio.html
+#usr/share/doc/ntp4/html/authentic.html
+#usr/share/doc/ntp4/html/authopt.html
+#usr/share/doc/ntp4/html/autokey.html
+#usr/share/doc/ntp4/html/bugs.html
+#usr/share/doc/ntp4/html/build.html
+#usr/share/doc/ntp4/html/clock.html
+#usr/share/doc/ntp4/html/clockopt.html
+#usr/share/doc/ntp4/html/cluster.html
+#usr/share/doc/ntp4/html/comdex.html
+#usr/share/doc/ntp4/html/config.html
+#usr/share/doc/ntp4/html/confopt.html
+#usr/share/doc/ntp4/html/copyright.html
+#usr/share/doc/ntp4/html/debug.html
+#usr/share/doc/ntp4/html/decode.html
+#usr/share/doc/ntp4/html/discipline.html
+#usr/share/doc/ntp4/html/discover.html
+#usr/share/doc/ntp4/html/drivers
+#usr/share/doc/ntp4/html/drivers/driver1.html
+#usr/share/doc/ntp4/html/drivers/driver10.html
+#usr/share/doc/ntp4/html/drivers/driver11.html
+#usr/share/doc/ntp4/html/drivers/driver12.html
+#usr/share/doc/ntp4/html/drivers/driver16.html
+#usr/share/doc/ntp4/html/drivers/driver18.html
+#usr/share/doc/ntp4/html/drivers/driver19.html
+#usr/share/doc/ntp4/html/drivers/driver20.html
+#usr/share/doc/ntp4/html/drivers/driver22.html
+#usr/share/doc/ntp4/html/drivers/driver26.html
+#usr/share/doc/ntp4/html/drivers/driver27.html
+#usr/share/doc/ntp4/html/drivers/driver28.html
+#usr/share/doc/ntp4/html/drivers/driver29.html
+#usr/share/doc/ntp4/html/drivers/driver3.html
+#usr/share/doc/ntp4/html/drivers/driver30.html
+#usr/share/doc/ntp4/html/drivers/driver31.html
+#usr/share/doc/ntp4/html/drivers/driver32.html
+#usr/share/doc/ntp4/html/drivers/driver33.html
+#usr/share/doc/ntp4/html/drivers/driver34.html
+#usr/share/doc/ntp4/html/drivers/driver35.html
+#usr/share/doc/ntp4/html/drivers/driver36.html
+#usr/share/doc/ntp4/html/drivers/driver37.html
+#usr/share/doc/ntp4/html/drivers/driver38.html
+#usr/share/doc/ntp4/html/drivers/driver39.html
+#usr/share/doc/ntp4/html/drivers/driver4.html
+#usr/share/doc/ntp4/html/drivers/driver40.html
+#usr/share/doc/ntp4/html/drivers/driver42.html
+#usr/share/doc/ntp4/html/drivers/driver43.html
+#usr/share/doc/ntp4/html/drivers/driver44.html
+#usr/share/doc/ntp4/html/drivers/driver45.html
+#usr/share/doc/ntp4/html/drivers/driver46.html
+#usr/share/doc/ntp4/html/drivers/driver5.html
+#usr/share/doc/ntp4/html/drivers/driver6.html
+#usr/share/doc/ntp4/html/drivers/driver7.html
+#usr/share/doc/ntp4/html/drivers/driver8.html
+#usr/share/doc/ntp4/html/drivers/driver9.html
+#usr/share/doc/ntp4/html/drivers/icons
+#usr/share/doc/ntp4/html/drivers/icons/home.gif
+#usr/share/doc/ntp4/html/drivers/icons/mail2.gif
+#usr/share/doc/ntp4/html/drivers/mx4200data.html
+#usr/share/doc/ntp4/html/drivers/oncore-shmem.html
+#usr/share/doc/ntp4/html/drivers/scripts
+#usr/share/doc/ntp4/html/drivers/scripts/footer.txt
+#usr/share/doc/ntp4/html/drivers/scripts/style.css
+#usr/share/doc/ntp4/html/drivers/tf582_4.html
+#usr/share/doc/ntp4/html/extern.html
+#usr/share/doc/ntp4/html/filter.html
+#usr/share/doc/ntp4/html/hints
+#usr/share/doc/ntp4/html/hints.html
+#usr/share/doc/ntp4/html/hints/a-ux
+#usr/share/doc/ntp4/html/hints/aix
+#usr/share/doc/ntp4/html/hints/bsdi
+#usr/share/doc/ntp4/html/hints/changes
+#usr/share/doc/ntp4/html/hints/decosf1
+#usr/share/doc/ntp4/html/hints/decosf2
+#usr/share/doc/ntp4/html/hints/freebsd
+#usr/share/doc/ntp4/html/hints/hpux
+#usr/share/doc/ntp4/html/hints/linux
+#usr/share/doc/ntp4/html/hints/mpeix
+#usr/share/doc/ntp4/html/hints/notes-xntp-v3
+#usr/share/doc/ntp4/html/hints/parse
+#usr/share/doc/ntp4/html/hints/refclocks
+#usr/share/doc/ntp4/html/hints/rs6000
+#usr/share/doc/ntp4/html/hints/sco.html
+#usr/share/doc/ntp4/html/hints/sgi
+#usr/share/doc/ntp4/html/hints/solaris-dosynctodr.html
+#usr/share/doc/ntp4/html/hints/solaris.html
+#usr/share/doc/ntp4/html/hints/solaris.xtra.4023118
+#usr/share/doc/ntp4/html/hints/solaris.xtra.4095849
+#usr/share/doc/ntp4/html/hints/solaris.xtra.S99ntpd
+#usr/share/doc/ntp4/html/hints/solaris.xtra.patchfreq
+#usr/share/doc/ntp4/html/hints/sun4
+#usr/share/doc/ntp4/html/hints/svr4-dell
+#usr/share/doc/ntp4/html/hints/svr4_package
+#usr/share/doc/ntp4/html/hints/todo
+#usr/share/doc/ntp4/html/hints/vxworks.html
+#usr/share/doc/ntp4/html/hints/winnt.html
+#usr/share/doc/ntp4/html/history.html
+#usr/share/doc/ntp4/html/howto.html
+#usr/share/doc/ntp4/html/huffpuff.html
+#usr/share/doc/ntp4/html/icons
+#usr/share/doc/ntp4/html/icons/home.gif
+#usr/share/doc/ntp4/html/icons/mail2.gif
+#usr/share/doc/ntp4/html/icons/sitemap.png
+#usr/share/doc/ntp4/html/index.html
+#usr/share/doc/ntp4/html/kern.html
+#usr/share/doc/ntp4/html/kernpps.html
+#usr/share/doc/ntp4/html/keygen.html
+#usr/share/doc/ntp4/html/leap.html
+#usr/share/doc/ntp4/html/miscopt.html
+#usr/share/doc/ntp4/html/monopt.html
+#usr/share/doc/ntp4/html/msyslog.html
+#usr/share/doc/ntp4/html/ntp-wait.html
+#usr/share/doc/ntp4/html/ntp_conf.html
+#usr/share/doc/ntp4/html/ntpd.html
+#usr/share/doc/ntp4/html/ntpdate.html
+#usr/share/doc/ntp4/html/ntpdc.html
+#usr/share/doc/ntp4/html/ntpdsim.html
+#usr/share/doc/ntp4/html/ntpdsim_new.html
+#usr/share/doc/ntp4/html/ntpq.html
+#usr/share/doc/ntp4/html/ntptime.html
+#usr/share/doc/ntp4/html/ntptrace.html
+#usr/share/doc/ntp4/html/orphan.html
+#usr/share/doc/ntp4/html/parsedata.html
+#usr/share/doc/ntp4/html/parsenew.html
+#usr/share/doc/ntp4/html/pic
+#usr/share/doc/ntp4/html/pic/9400n.jpg
+#usr/share/doc/ntp4/html/pic/alice11.gif
+#usr/share/doc/ntp4/html/pic/alice13.gif
+#usr/share/doc/ntp4/html/pic/alice15.gif
+#usr/share/doc/ntp4/html/pic/alice23.gif
+#usr/share/doc/ntp4/html/pic/alice31.gif
+#usr/share/doc/ntp4/html/pic/alice32.gif
+#usr/share/doc/ntp4/html/pic/alice35.gif
+#usr/share/doc/ntp4/html/pic/alice38.gif
+#usr/share/doc/ntp4/html/pic/alice44.gif
+#usr/share/doc/ntp4/html/pic/alice47.gif
+#usr/share/doc/ntp4/html/pic/alice51.gif
+#usr/share/doc/ntp4/html/pic/alice61.gif
+#usr/share/doc/ntp4/html/pic/barnstable.gif
+#usr/share/doc/ntp4/html/pic/beaver.gif
+#usr/share/doc/ntp4/html/pic/boom3.gif
+#usr/share/doc/ntp4/html/pic/boom3a.gif
+#usr/share/doc/ntp4/html/pic/boom4.gif
+#usr/share/doc/ntp4/html/pic/broad.gif
+#usr/share/doc/ntp4/html/pic/bustardfly.gif
+#usr/share/doc/ntp4/html/pic/c51.jpg
+#usr/share/doc/ntp4/html/pic/description.jpg
+#usr/share/doc/ntp4/html/pic/discipline.gif
+#usr/share/doc/ntp4/html/pic/dogsnake.gif
+#usr/share/doc/ntp4/html/pic/driver29.gif
+#usr/share/doc/ntp4/html/pic/driver43_1.gif
+#usr/share/doc/ntp4/html/pic/driver43_2.jpg
+#usr/share/doc/ntp4/html/pic/fg6021.gif
+#usr/share/doc/ntp4/html/pic/fg6039.jpg
+#usr/share/doc/ntp4/html/pic/fig_3_1.gif
+#usr/share/doc/ntp4/html/pic/flatheads.gif
+#usr/share/doc/ntp4/html/pic/flt1.gif
+#usr/share/doc/ntp4/html/pic/flt2.gif
+#usr/share/doc/ntp4/html/pic/flt3.gif
+#usr/share/doc/ntp4/html/pic/flt4.gif
+#usr/share/doc/ntp4/html/pic/flt5.gif
+#usr/share/doc/ntp4/html/pic/flt6.gif
+#usr/share/doc/ntp4/html/pic/flt7.gif
+#usr/share/doc/ntp4/html/pic/flt8.gif
+#usr/share/doc/ntp4/html/pic/flt9.gif
+#usr/share/doc/ntp4/html/pic/freq1211.gif
+#usr/share/doc/ntp4/html/pic/gadget.jpg
+#usr/share/doc/ntp4/html/pic/gps167.jpg
+#usr/share/doc/ntp4/html/pic/group.gif
+#usr/share/doc/ntp4/html/pic/hornraba.gif
+#usr/share/doc/ntp4/html/pic/igclock.gif
+#usr/share/doc/ntp4/html/pic/neoclock4x.gif
+#usr/share/doc/ntp4/html/pic/offset1211.gif
+#usr/share/doc/ntp4/html/pic/oncore_evalbig.gif
+#usr/share/doc/ntp4/html/pic/oncore_remoteant.jpg
+#usr/share/doc/ntp4/html/pic/oncore_utplusbig.gif
+#usr/share/doc/ntp4/html/pic/oz2.gif
+#usr/share/doc/ntp4/html/pic/panda.gif
+#usr/share/doc/ntp4/html/pic/pd_om006.gif
+#usr/share/doc/ntp4/html/pic/pd_om011.gif
+#usr/share/doc/ntp4/html/pic/peer.gif
+#usr/share/doc/ntp4/html/pic/pogo.gif
+#usr/share/doc/ntp4/html/pic/pogo1a.gif
+#usr/share/doc/ntp4/html/pic/pogo3a.gif
+#usr/share/doc/ntp4/html/pic/pogo4.gif
+#usr/share/doc/ntp4/html/pic/pogo5.gif
+#usr/share/doc/ntp4/html/pic/pogo6.gif
+#usr/share/doc/ntp4/html/pic/pogo7.gif
+#usr/share/doc/ntp4/html/pic/pogo8.gif
+#usr/share/doc/ntp4/html/pic/pzf509.jpg
+#usr/share/doc/ntp4/html/pic/pzf511.jpg
+#usr/share/doc/ntp4/html/pic/rabbit.gif
+#usr/share/doc/ntp4/html/pic/radio2.jpg
+#usr/share/doc/ntp4/html/pic/sheepb.jpg
+#usr/share/doc/ntp4/html/pic/stack1a.jpg
+#usr/share/doc/ntp4/html/pic/stats.gif
+#usr/share/doc/ntp4/html/pic/sx5.gif
+#usr/share/doc/ntp4/html/pic/thunderbolt.jpg
+#usr/share/doc/ntp4/html/pic/time1.gif
+#usr/share/doc/ntp4/html/pic/tonea.gif
+#usr/share/doc/ntp4/html/pic/tribeb.gif
+#usr/share/doc/ntp4/html/pic/wingdorothy.gif
+#usr/share/doc/ntp4/html/poll.html
+#usr/share/doc/ntp4/html/pps.html
+#usr/share/doc/ntp4/html/prefer.html
+#usr/share/doc/ntp4/html/quick.html
+#usr/share/doc/ntp4/html/rate.html
+#usr/share/doc/ntp4/html/rdebug.html
+#usr/share/doc/ntp4/html/refclock.html
+#usr/share/doc/ntp4/html/release.html
+#usr/share/doc/ntp4/html/scripts
+#usr/share/doc/ntp4/html/scripts/accopt.txt
+#usr/share/doc/ntp4/html/scripts/audio.txt
+#usr/share/doc/ntp4/html/scripts/authopt.txt
+#usr/share/doc/ntp4/html/scripts/clockopt.txt
+#usr/share/doc/ntp4/html/scripts/command.txt
+#usr/share/doc/ntp4/html/scripts/config.txt
+#usr/share/doc/ntp4/html/scripts/confopt.txt
+#usr/share/doc/ntp4/html/scripts/external.txt
+#usr/share/doc/ntp4/html/scripts/footer.txt
+#usr/share/doc/ntp4/html/scripts/hand.txt
+#usr/share/doc/ntp4/html/scripts/install.txt
+#usr/share/doc/ntp4/html/scripts/manual.txt
+#usr/share/doc/ntp4/html/scripts/misc.txt
+#usr/share/doc/ntp4/html/scripts/miscopt.txt
+#usr/share/doc/ntp4/html/scripts/monopt.txt
+#usr/share/doc/ntp4/html/scripts/refclock.txt
+#usr/share/doc/ntp4/html/scripts/special.txt
+#usr/share/doc/ntp4/html/scripts/style.css
+#usr/share/doc/ntp4/html/select.html
+#usr/share/doc/ntp4/html/sitemap.html
+#usr/share/doc/ntp4/html/sntp.html
+#usr/share/doc/ntp4/html/stats.html
+#usr/share/doc/ntp4/html/tickadj.html
+#usr/share/doc/ntp4/html/warp.html
+#usr/share/doc/ntp4/html/xleave.html
+#usr/share/doc/ntp4/ntp-keygen.html
+#usr/share/doc/ntp4/ntp-wait.html
+#usr/share/doc/ntp4/ntp.conf.html
+#usr/share/doc/ntp4/ntp.keys.html
+#usr/share/doc/ntp4/ntpd.html
+#usr/share/doc/ntp4/ntpdc.html
+#usr/share/doc/ntp4/ntpq.html
+#usr/share/doc/ntp4/ntpsnmpd.html
+#usr/share/doc/ntp4/ntpsweep.html
+#usr/share/doc/ntp4/ntptrace.html
+#usr/share/doc/sntp
+#usr/share/doc/sntp/sntp.html
+#usr/share/man/man1/calc_tickadj.1
 #usr/share/man/man1/ntp-keygen.1
+#usr/share/man/man1/ntp-wait.1
 #usr/share/man/man1/ntpd.1
 #usr/share/man/man1/ntpdc.1
 #usr/share/man/man1/ntpq.1
-#usr/share/man/man1/ntpsnmpd.1
+#usr/share/man/man1/ntptrace.1
 #usr/share/man/man1/sntp.1
+#usr/share/man/man5/ntp.conf.5
+#usr/share/man/man5/ntp.keys.5
+#usr/share/ntp
+#usr/share/ntp/lib
+#usr/share/ntp/lib/NTP
+#usr/share/ntp/lib/NTP/Util.pm
 var/ipfire/time/counter.conf
 var/ipfire/time/enable
 var/ipfire/time/settime.conf

diff --git a/config/rootfiles/common/setup b/config/rootfiles/common/setup
index 334c243a4ef3de1d5055dcddb2134fc567040636..2b51e3001134ebcb3c802a2a2337b2b7b5ddef6e 100644 (file)
--- a/config/rootfiles/common/setup
+++ b/config/rootfiles/common/setup
@@ -1,3 +1,63 @@
 usr/bin/probenic.sh
 usr/sbin/setup
+usr/share/locale/ar/LC_MESSAGES/setup.mo
+usr/share/locale/ca/LC_MESSAGES/setup.mo
+#usr/share/locale/cs_CZ
+#usr/share/locale/cs_CZ/LC_MESSAGES
+usr/share/locale/cs_CZ/LC_MESSAGES/setup.mo
+usr/share/locale/da/LC_MESSAGES/setup.mo
 usr/share/locale/de/LC_MESSAGES/setup.mo
+#usr/share/locale/el_GR
+#usr/share/locale/el_GR/LC_MESSAGES
+usr/share/locale/el_GR/LC_MESSAGES/setup.mo
+usr/share/locale/es/LC_MESSAGES/setup.mo
+usr/share/locale/fa/LC_MESSAGES/setup.mo
+usr/share/locale/fr/LC_MESSAGES/setup.mo
+usr/share/locale/hr/LC_MESSAGES/setup.mo
+usr/share/locale/hu/LC_MESSAGES/setup.mo
+usr/share/locale/id/LC_MESSAGES/setup.mo
+usr/share/locale/it/LC_MESSAGES/setup.mo
+usr/share/locale/ja/LC_MESSAGES/setup.mo
+#usr/share/locale/ja_JP
+#usr/share/locale/ja_JP/LC_MESSAGES
+usr/share/locale/ja_JP/LC_MESSAGES/setup.mo
+#usr/share/locale/jv
+#usr/share/locale/jv/LC_MESSAGES
+usr/share/locale/jv/LC_MESSAGES/setup.mo
+#usr/share/locale/km_KH
+#usr/share/locale/km_KH/LC_MESSAGES
+usr/share/locale/km_KH/LC_MESSAGES/setup.mo
+usr/share/locale/nl/LC_MESSAGES/setup.mo
+usr/share/locale/pl/LC_MESSAGES/setup.mo
+usr/share/locale/pt_BR/LC_MESSAGES/setup.mo
+#usr/share/locale/pt_PT
+#usr/share/locale/pt_PT/LC_MESSAGES
+usr/share/locale/pt_PT/LC_MESSAGES/setup.mo
+#usr/share/locale/ro_RO
+#usr/share/locale/ro_RO/LC_MESSAGES
+usr/share/locale/ro_RO/LC_MESSAGES/setup.mo
+usr/share/locale/ru/LC_MESSAGES/setup.mo
+#usr/share/locale/ru_RU
+#usr/share/locale/ru_RU/LC_MESSAGES
+usr/share/locale/ru_RU/LC_MESSAGES/setup.mo
+usr/share/locale/rw/LC_MESSAGES/setup.mo
+usr/share/locale/sk/LC_MESSAGES/setup.mo
+usr/share/locale/sq/LC_MESSAGES/setup.mo
+usr/share/locale/sr/LC_MESSAGES/setup.mo
+#usr/share/locale/su
+#usr/share/locale/su/LC_MESSAGES
+usr/share/locale/su/LC_MESSAGES/setup.mo
+usr/share/locale/sv/LC_MESSAGES/setup.mo
+usr/share/locale/th/LC_MESSAGES/setup.mo
+#usr/share/locale/tk
+#usr/share/locale/tk/LC_MESSAGES
+usr/share/locale/tk/LC_MESSAGES/setup.mo
+usr/share/locale/tr/LC_MESSAGES/setup.mo
+usr/share/locale/uk/LC_MESSAGES/setup.mo
+#usr/share/locale/uz@Latn
+#usr/share/locale/uz@Latn/LC_MESSAGES
+usr/share/locale/uz@Latn/LC_MESSAGES/setup.mo
+usr/share/locale/vi/LC_MESSAGES/setup.mo
+#usr/share/locale/zh
+#usr/share/locale/zh/LC_MESSAGES
+usr/share/locale/zh/LC_MESSAGES/setup.mo

diff --git a/config/rootfiles/common/stage2 b/config/rootfiles/common/stage2
index cbfde185c8d69c0d69ef8fe0e5ec6bbfe4730922..4e8b750c8b645c9617087593e541687e4014ca4f 100644 (file)
--- a/config/rootfiles/common/stage2
+++ b/config/rootfiles/common/stage2
@@ -20,6 +20,7 @@ etc/ld.so.conf
 etc/logrotate.conf
 etc/mime.types
 etc/modprobe.d
+etc/modprobe.d/btmrvl_sdio.conf
 etc/modprobe.d/cfg80211.conf
 etc/modprobe.d/pcspeaker.conf
 etc/modules.conf
@@ -45,6 +46,11 @@ etc/system-release
 #home
 home/nobody
 #lib
+#lib/firmware
+#lib/firmware/brcm
+lib/firmware/brcm/brcmfmac4329-sdio.txt
+lib/firmware/brcm/brcmfmac4330-sdio.txt
+lib/firmware/brcm/brcmfmac43362-sdio.txt
 #media
 media/cdrom
 media/floppy
@@ -60,6 +66,7 @@ root/.bash_logout
 root/.bash_profile
 root/.bashrc
 root/ipfire
+run
 #sbin
 #srv
 #usr/bin
@@ -94,7 +101,7 @@ usr/local/bin/scanhd
 usr/local/bin/settime
 usr/local/bin/timecheck
 usr/local/bin/timezone-transition
-#usr/local/bin/uname
+usr/local/bin/update-bootloader
 usr/local/bin/update-lang-cache
 #usr/local/include
 #usr/local/lib
@@ -138,7 +145,6 @@ usr/share/doc/licenses/GPLv3
 #usr/share/terminfo
 #usr/share/xt_geoip
 #usr/share/zoneinfo
-run
 #var
 #var/cache
 var/empty

diff --git a/config/rootfiles/core/86/exclude b/config/rootfiles/core/86/exclude
index 18e9b4d2433cbceb33fa5ac82618577040e4f66e..37c2aaab1fd3a06b028912c3eee7da956e13bf60 100644 (file)
--- a/config/rootfiles/core/86/exclude
+++ b/config/rootfiles/core/86/exclude
@@ -14,7 +14,10 @@ etc/sysconfig/firewall.local
 etc/sysconfig/rc.local
 etc/udev/rules.d/30-persistent-network.rules
 srv/web/ipfire/html/proxy.pac
-var/ipfire/ovpn
+var/ipfire/time
+var/ipfire/ovpn/ccd.conf
+var/ipfire/ovpn/ccdroute
+var/ipfire/ovpn/ccdroute2
 var/log/cache
 var/state/dhcp/dhcpd.leases
 var/updatecache

diff --git a/config/rootfiles/core/86/filelists/armv5tel/swconfig b/config/rootfiles/core/86/filelists/armv5tel/swconfig
new file mode 120000 (symlink)
index 0000000..e5606ed
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/armv5tel/swconfig
@@ -0,0 +1 @@
+../../../../common/armv5tel/swconfig
\ No newline at end of file

diff --git a/config/rootfiles/core/86/filelists/armv5tel/u-boot b/config/rootfiles/core/86/filelists/armv5tel/u-boot
new file mode 120000 (symlink)
index 0000000..3df31a8
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/armv5tel/u-boot
@@ -0,0 +1 @@
+../../../../common/armv5tel/u-boot
\ No newline at end of file

diff --git a/config/rootfiles/core/86/filelists/bash b/config/rootfiles/core/86/filelists/bash
new file mode 120000 (symlink)
index 0000000..de970cb
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/bash
@@ -0,0 +1 @@
+../../../common/bash
\ No newline at end of file

diff --git a/config/rootfiles/core/86/filelists/crda b/config/rootfiles/core/86/filelists/crda
new file mode 120000 (symlink)
index 0000000..d68c46e
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/crda
@@ -0,0 +1 @@
+../../../common/crda
\ No newline at end of file

diff --git a/config/rootfiles/core/86/filelists/files b/config/rootfiles/core/86/filelists/files
index cfcb0cce1ee0379692d0d67aff93181b380bd48d..9a07cbcf57193d1de0bbed6b0c75d19ed83d7b37 100644 (file)
--- a/config/rootfiles/core/86/filelists/files
+++ b/config/rootfiles/core/86/filelists/files
@@ -1,5 +1,12 @@
 etc/system-release
 etc/issue
+etc/modprobe.d/btmrvl_sdio.conf
+etc/rc.d/init.d/collectd
+etc/rc.d/init.d/leds
+opt/pakfire/etc/pakfire.conf
+usr/lib/firewall/rules.pl
+usr/local/bin/update-bootloader
 var/ipfire/header.pl
 var/ipfire/langs
 var/ipfire/lang.pl
+var/ipfire/ovpn/openssl/ovpn.cnf

diff --git a/config/rootfiles/core/86/filelists/fireinfo b/config/rootfiles/core/86/filelists/fireinfo
new file mode 120000 (symlink)
index 0000000..c461155
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/fireinfo
@@ -0,0 +1 @@
+../../../common/fireinfo
\ No newline at end of file

diff --git a/config/rootfiles/core/86/filelists/iw b/config/rootfiles/core/86/filelists/iw
new file mode 120000 (symlink)
index 0000000..7c58a20
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/iw
@@ -0,0 +1 @@
+../../../common/iw
\ No newline at end of file

diff --git a/config/rootfiles/core/86/filelists/kbd b/config/rootfiles/core/86/filelists/kbd
new file mode 120000 (symlink)
index 0000000..9b85839
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/kbd
@@ -0,0 +1 @@
+../../../common/kbd
\ No newline at end of file

diff --git a/config/rootfiles/core/86/filelists/ntp b/config/rootfiles/core/86/filelists/ntp
new file mode 100644 (file)
index 0000000..aacdb25
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/ntp
@@ -0,0 +1,287 @@
+etc/ntp
+etc/ntp.conf
+etc/rc.d/rc0.d/K46ntpd
+etc/rc.d/rc3.d/S26ntpd
+etc/rc.d/rc6.d/K46ntpd
+usr/bin/calc_tickadj
+usr/bin/ntp-keygen
+usr/bin/ntp-wait
+usr/bin/ntpd
+usr/bin/ntpdate
+usr/bin/ntpdc
+usr/bin/ntpq
+usr/bin/ntptime
+usr/bin/ntptrace
+usr/bin/sntp
+usr/bin/tickadj
+#usr/include/event2
+#usr/share/doc/ntp4
+#usr/share/doc/ntp4/html
+#usr/share/doc/ntp4/html/access.html
+#usr/share/doc/ntp4/html/accopt.html
+#usr/share/doc/ntp4/html/assoc.html
+#usr/share/doc/ntp4/html/audio.html
+#usr/share/doc/ntp4/html/authentic.html
+#usr/share/doc/ntp4/html/authopt.html
+#usr/share/doc/ntp4/html/autokey.html
+#usr/share/doc/ntp4/html/bugs.html
+#usr/share/doc/ntp4/html/build.html
+#usr/share/doc/ntp4/html/clock.html
+#usr/share/doc/ntp4/html/clockopt.html
+#usr/share/doc/ntp4/html/cluster.html
+#usr/share/doc/ntp4/html/comdex.html
+#usr/share/doc/ntp4/html/config.html
+#usr/share/doc/ntp4/html/confopt.html
+#usr/share/doc/ntp4/html/copyright.html
+#usr/share/doc/ntp4/html/debug.html
+#usr/share/doc/ntp4/html/decode.html
+#usr/share/doc/ntp4/html/discipline.html
+#usr/share/doc/ntp4/html/discover.html
+#usr/share/doc/ntp4/html/drivers
+#usr/share/doc/ntp4/html/drivers/driver1.html
+#usr/share/doc/ntp4/html/drivers/driver10.html
+#usr/share/doc/ntp4/html/drivers/driver11.html
+#usr/share/doc/ntp4/html/drivers/driver12.html
+#usr/share/doc/ntp4/html/drivers/driver16.html
+#usr/share/doc/ntp4/html/drivers/driver18.html
+#usr/share/doc/ntp4/html/drivers/driver19.html
+#usr/share/doc/ntp4/html/drivers/driver20.html
+#usr/share/doc/ntp4/html/drivers/driver22.html
+#usr/share/doc/ntp4/html/drivers/driver26.html
+#usr/share/doc/ntp4/html/drivers/driver27.html
+#usr/share/doc/ntp4/html/drivers/driver28.html
+#usr/share/doc/ntp4/html/drivers/driver29.html
+#usr/share/doc/ntp4/html/drivers/driver3.html
+#usr/share/doc/ntp4/html/drivers/driver30.html
+#usr/share/doc/ntp4/html/drivers/driver31.html
+#usr/share/doc/ntp4/html/drivers/driver32.html
+#usr/share/doc/ntp4/html/drivers/driver33.html
+#usr/share/doc/ntp4/html/drivers/driver34.html
+#usr/share/doc/ntp4/html/drivers/driver35.html
+#usr/share/doc/ntp4/html/drivers/driver36.html
+#usr/share/doc/ntp4/html/drivers/driver37.html
+#usr/share/doc/ntp4/html/drivers/driver38.html
+#usr/share/doc/ntp4/html/drivers/driver39.html
+#usr/share/doc/ntp4/html/drivers/driver4.html
+#usr/share/doc/ntp4/html/drivers/driver40.html
+#usr/share/doc/ntp4/html/drivers/driver42.html
+#usr/share/doc/ntp4/html/drivers/driver43.html
+#usr/share/doc/ntp4/html/drivers/driver44.html
+#usr/share/doc/ntp4/html/drivers/driver45.html
+#usr/share/doc/ntp4/html/drivers/driver46.html
+#usr/share/doc/ntp4/html/drivers/driver5.html
+#usr/share/doc/ntp4/html/drivers/driver6.html
+#usr/share/doc/ntp4/html/drivers/driver7.html
+#usr/share/doc/ntp4/html/drivers/driver8.html
+#usr/share/doc/ntp4/html/drivers/driver9.html
+#usr/share/doc/ntp4/html/drivers/icons
+#usr/share/doc/ntp4/html/drivers/icons/home.gif
+#usr/share/doc/ntp4/html/drivers/icons/mail2.gif
+#usr/share/doc/ntp4/html/drivers/mx4200data.html
+#usr/share/doc/ntp4/html/drivers/oncore-shmem.html
+#usr/share/doc/ntp4/html/drivers/scripts
+#usr/share/doc/ntp4/html/drivers/scripts/footer.txt
+#usr/share/doc/ntp4/html/drivers/scripts/style.css
+#usr/share/doc/ntp4/html/drivers/tf582_4.html
+#usr/share/doc/ntp4/html/extern.html
+#usr/share/doc/ntp4/html/filter.html
+#usr/share/doc/ntp4/html/hints
+#usr/share/doc/ntp4/html/hints.html
+#usr/share/doc/ntp4/html/hints/a-ux
+#usr/share/doc/ntp4/html/hints/aix
+#usr/share/doc/ntp4/html/hints/bsdi
+#usr/share/doc/ntp4/html/hints/changes
+#usr/share/doc/ntp4/html/hints/decosf1
+#usr/share/doc/ntp4/html/hints/decosf2
+#usr/share/doc/ntp4/html/hints/freebsd
+#usr/share/doc/ntp4/html/hints/hpux
+#usr/share/doc/ntp4/html/hints/linux
+#usr/share/doc/ntp4/html/hints/mpeix
+#usr/share/doc/ntp4/html/hints/notes-xntp-v3
+#usr/share/doc/ntp4/html/hints/parse
+#usr/share/doc/ntp4/html/hints/refclocks
+#usr/share/doc/ntp4/html/hints/rs6000
+#usr/share/doc/ntp4/html/hints/sco.html
+#usr/share/doc/ntp4/html/hints/sgi
+#usr/share/doc/ntp4/html/hints/solaris-dosynctodr.html
+#usr/share/doc/ntp4/html/hints/solaris.html
+#usr/share/doc/ntp4/html/hints/solaris.xtra.4023118
+#usr/share/doc/ntp4/html/hints/solaris.xtra.4095849
+#usr/share/doc/ntp4/html/hints/solaris.xtra.S99ntpd
+#usr/share/doc/ntp4/html/hints/solaris.xtra.patchfreq
+#usr/share/doc/ntp4/html/hints/sun4
+#usr/share/doc/ntp4/html/hints/svr4-dell
+#usr/share/doc/ntp4/html/hints/svr4_package
+#usr/share/doc/ntp4/html/hints/todo
+#usr/share/doc/ntp4/html/hints/vxworks.html
+#usr/share/doc/ntp4/html/hints/winnt.html
+#usr/share/doc/ntp4/html/history.html
+#usr/share/doc/ntp4/html/howto.html
+#usr/share/doc/ntp4/html/huffpuff.html
+#usr/share/doc/ntp4/html/icons
+#usr/share/doc/ntp4/html/icons/home.gif
+#usr/share/doc/ntp4/html/icons/mail2.gif
+#usr/share/doc/ntp4/html/icons/sitemap.png
+#usr/share/doc/ntp4/html/index.html
+#usr/share/doc/ntp4/html/kern.html
+#usr/share/doc/ntp4/html/kernpps.html
+#usr/share/doc/ntp4/html/keygen.html
+#usr/share/doc/ntp4/html/leap.html
+#usr/share/doc/ntp4/html/miscopt.html
+#usr/share/doc/ntp4/html/monopt.html
+#usr/share/doc/ntp4/html/msyslog.html
+#usr/share/doc/ntp4/html/ntp-wait.html
+#usr/share/doc/ntp4/html/ntp_conf.html
+#usr/share/doc/ntp4/html/ntpd.html
+#usr/share/doc/ntp4/html/ntpdate.html
+#usr/share/doc/ntp4/html/ntpdc.html
+#usr/share/doc/ntp4/html/ntpdsim.html
+#usr/share/doc/ntp4/html/ntpdsim_new.html
+#usr/share/doc/ntp4/html/ntpq.html
+#usr/share/doc/ntp4/html/ntptime.html
+#usr/share/doc/ntp4/html/ntptrace.html
+#usr/share/doc/ntp4/html/orphan.html
+#usr/share/doc/ntp4/html/parsedata.html
+#usr/share/doc/ntp4/html/parsenew.html
+#usr/share/doc/ntp4/html/pic
+#usr/share/doc/ntp4/html/pic/9400n.jpg
+#usr/share/doc/ntp4/html/pic/alice11.gif
+#usr/share/doc/ntp4/html/pic/alice13.gif
+#usr/share/doc/ntp4/html/pic/alice15.gif
+#usr/share/doc/ntp4/html/pic/alice23.gif
+#usr/share/doc/ntp4/html/pic/alice31.gif
+#usr/share/doc/ntp4/html/pic/alice32.gif
+#usr/share/doc/ntp4/html/pic/alice35.gif
+#usr/share/doc/ntp4/html/pic/alice38.gif
+#usr/share/doc/ntp4/html/pic/alice44.gif
+#usr/share/doc/ntp4/html/pic/alice47.gif
+#usr/share/doc/ntp4/html/pic/alice51.gif
+#usr/share/doc/ntp4/html/pic/alice61.gif
+#usr/share/doc/ntp4/html/pic/barnstable.gif
+#usr/share/doc/ntp4/html/pic/beaver.gif
+#usr/share/doc/ntp4/html/pic/boom3.gif
+#usr/share/doc/ntp4/html/pic/boom3a.gif
+#usr/share/doc/ntp4/html/pic/boom4.gif
+#usr/share/doc/ntp4/html/pic/broad.gif
+#usr/share/doc/ntp4/html/pic/bustardfly.gif
+#usr/share/doc/ntp4/html/pic/c51.jpg
+#usr/share/doc/ntp4/html/pic/description.jpg
+#usr/share/doc/ntp4/html/pic/discipline.gif
+#usr/share/doc/ntp4/html/pic/dogsnake.gif
+#usr/share/doc/ntp4/html/pic/driver29.gif
+#usr/share/doc/ntp4/html/pic/driver43_1.gif
+#usr/share/doc/ntp4/html/pic/driver43_2.jpg
+#usr/share/doc/ntp4/html/pic/fg6021.gif
+#usr/share/doc/ntp4/html/pic/fg6039.jpg
+#usr/share/doc/ntp4/html/pic/fig_3_1.gif
+#usr/share/doc/ntp4/html/pic/flatheads.gif
+#usr/share/doc/ntp4/html/pic/flt1.gif
+#usr/share/doc/ntp4/html/pic/flt2.gif
+#usr/share/doc/ntp4/html/pic/flt3.gif
+#usr/share/doc/ntp4/html/pic/flt4.gif
+#usr/share/doc/ntp4/html/pic/flt5.gif
+#usr/share/doc/ntp4/html/pic/flt6.gif
+#usr/share/doc/ntp4/html/pic/flt7.gif
+#usr/share/doc/ntp4/html/pic/flt8.gif
+#usr/share/doc/ntp4/html/pic/flt9.gif
+#usr/share/doc/ntp4/html/pic/freq1211.gif
+#usr/share/doc/ntp4/html/pic/gadget.jpg
+#usr/share/doc/ntp4/html/pic/gps167.jpg
+#usr/share/doc/ntp4/html/pic/group.gif
+#usr/share/doc/ntp4/html/pic/hornraba.gif
+#usr/share/doc/ntp4/html/pic/igclock.gif
+#usr/share/doc/ntp4/html/pic/neoclock4x.gif
+#usr/share/doc/ntp4/html/pic/offset1211.gif
+#usr/share/doc/ntp4/html/pic/oncore_evalbig.gif
+#usr/share/doc/ntp4/html/pic/oncore_remoteant.jpg
+#usr/share/doc/ntp4/html/pic/oncore_utplusbig.gif
+#usr/share/doc/ntp4/html/pic/oz2.gif
+#usr/share/doc/ntp4/html/pic/panda.gif
+#usr/share/doc/ntp4/html/pic/pd_om006.gif
+#usr/share/doc/ntp4/html/pic/pd_om011.gif
+#usr/share/doc/ntp4/html/pic/peer.gif
+#usr/share/doc/ntp4/html/pic/pogo.gif
+#usr/share/doc/ntp4/html/pic/pogo1a.gif
+#usr/share/doc/ntp4/html/pic/pogo3a.gif
+#usr/share/doc/ntp4/html/pic/pogo4.gif
+#usr/share/doc/ntp4/html/pic/pogo5.gif
+#usr/share/doc/ntp4/html/pic/pogo6.gif
+#usr/share/doc/ntp4/html/pic/pogo7.gif
+#usr/share/doc/ntp4/html/pic/pogo8.gif
+#usr/share/doc/ntp4/html/pic/pzf509.jpg
+#usr/share/doc/ntp4/html/pic/pzf511.jpg
+#usr/share/doc/ntp4/html/pic/rabbit.gif
+#usr/share/doc/ntp4/html/pic/radio2.jpg
+#usr/share/doc/ntp4/html/pic/sheepb.jpg
+#usr/share/doc/ntp4/html/pic/stack1a.jpg
+#usr/share/doc/ntp4/html/pic/stats.gif
+#usr/share/doc/ntp4/html/pic/sx5.gif
+#usr/share/doc/ntp4/html/pic/thunderbolt.jpg
+#usr/share/doc/ntp4/html/pic/time1.gif
+#usr/share/doc/ntp4/html/pic/tonea.gif
+#usr/share/doc/ntp4/html/pic/tribeb.gif
+#usr/share/doc/ntp4/html/pic/wingdorothy.gif
+#usr/share/doc/ntp4/html/poll.html
+#usr/share/doc/ntp4/html/pps.html
+#usr/share/doc/ntp4/html/prefer.html
+#usr/share/doc/ntp4/html/quick.html
+#usr/share/doc/ntp4/html/rate.html
+#usr/share/doc/ntp4/html/rdebug.html
+#usr/share/doc/ntp4/html/refclock.html
+#usr/share/doc/ntp4/html/release.html
+#usr/share/doc/ntp4/html/scripts
+#usr/share/doc/ntp4/html/scripts/accopt.txt
+#usr/share/doc/ntp4/html/scripts/audio.txt
+#usr/share/doc/ntp4/html/scripts/authopt.txt
+#usr/share/doc/ntp4/html/scripts/clockopt.txt
+#usr/share/doc/ntp4/html/scripts/command.txt
+#usr/share/doc/ntp4/html/scripts/config.txt
+#usr/share/doc/ntp4/html/scripts/confopt.txt
+#usr/share/doc/ntp4/html/scripts/external.txt
+#usr/share/doc/ntp4/html/scripts/footer.txt
+#usr/share/doc/ntp4/html/scripts/hand.txt
+#usr/share/doc/ntp4/html/scripts/install.txt
+#usr/share/doc/ntp4/html/scripts/manual.txt
+#usr/share/doc/ntp4/html/scripts/misc.txt
+#usr/share/doc/ntp4/html/scripts/miscopt.txt
+#usr/share/doc/ntp4/html/scripts/monopt.txt
+#usr/share/doc/ntp4/html/scripts/refclock.txt
+#usr/share/doc/ntp4/html/scripts/special.txt
+#usr/share/doc/ntp4/html/scripts/style.css
+#usr/share/doc/ntp4/html/select.html
+#usr/share/doc/ntp4/html/sitemap.html
+#usr/share/doc/ntp4/html/sntp.html
+#usr/share/doc/ntp4/html/stats.html
+#usr/share/doc/ntp4/html/tickadj.html
+#usr/share/doc/ntp4/html/warp.html
+#usr/share/doc/ntp4/html/xleave.html
+#usr/share/doc/ntp4/ntp-keygen.html
+#usr/share/doc/ntp4/ntp-wait.html
+#usr/share/doc/ntp4/ntp.conf.html
+#usr/share/doc/ntp4/ntp.keys.html
+#usr/share/doc/ntp4/ntpd.html
+#usr/share/doc/ntp4/ntpdc.html
+#usr/share/doc/ntp4/ntpq.html
+#usr/share/doc/ntp4/ntpsnmpd.html
+#usr/share/doc/ntp4/ntpsweep.html
+#usr/share/doc/ntp4/ntptrace.html
+#usr/share/doc/sntp
+#usr/share/doc/sntp/sntp.html
+#usr/share/man/man1/calc_tickadj.1
+#usr/share/man/man1/ntp-keygen.1
+#usr/share/man/man1/ntp-wait.1
+#usr/share/man/man1/ntpd.1
+#usr/share/man/man1/ntpdc.1
+#usr/share/man/man1/ntpq.1
+#usr/share/man/man1/ntptrace.1
+#usr/share/man/man1/sntp.1
+#usr/share/man/man5/ntp.conf.5
+#usr/share/man/man5/ntp.keys.5
+#usr/share/ntp
+#usr/share/ntp/lib
+#usr/share/ntp/lib/NTP
+#usr/share/ntp/lib/NTP/Util.pm
+var/ipfire/time/counter.conf
+var/ipfire/time/enable
+var/ipfire/time/settime.conf
+var/ipfire/time/settings

diff --git a/config/rootfiles/core/86/filelists/openssl b/config/rootfiles/core/86/filelists/openssl
new file mode 120000 (symlink)
index 0000000..e011a92
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/openssl
@@ -0,0 +1 @@
+../../../common/openssl
\ No newline at end of file

diff --git a/config/rootfiles/core/86/filelists/openssl-compat b/config/rootfiles/core/86/filelists/openssl-compat
new file mode 120000 (symlink)
index 0000000..c9fa421
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/openssl-compat
@@ -0,0 +1 @@
+../../../common/openssl-compat
\ No newline at end of file

diff --git a/config/rootfiles/core/86/filelists/openvpn b/config/rootfiles/core/86/filelists/openvpn
new file mode 120000 (symlink)
index 0000000..493f3f7
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/openvpn
@@ -0,0 +1 @@
+../../../common/openvpn
\ No newline at end of file

diff --git a/config/rootfiles/core/86/filelists/updated-firmwares b/config/rootfiles/core/86/filelists/updated-firmwares
new file mode 100644 (file)
index 0000000..f923b15
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/updated-firmwares
@@ -0,0 +1,205 @@
+lib/firmware/amd-ucode/microcode_amd_fam15h.bin
+lib/firmware/amd-ucode/microcode_amd_fam15h.bin.asc
+lib/firmware/amd-ucode/microcode_amd_fam16h.bin
+lib/firmware/amd-ucode/microcode_amd_fam16h.bin.asc
+lib/firmware/as102_data1_st.hex
+lib/firmware/as102_data2_st.hex
+lib/firmware/bnx2x/bnx2x-e1-7.10.51.0.fw
+lib/firmware/bnx2x/bnx2x-e1-7.8.19.0.fw
+lib/firmware/bnx2x/bnx2x-e1h-7.10.51.0.fw
+lib/firmware/bnx2x/bnx2x-e1h-7.8.19.0.fw
+lib/firmware/bnx2x/bnx2x-e2-7.10.51.0.fw
+lib/firmware/bnx2x/bnx2x-e2-7.8.19.0.fw
+lib/firmware/brcm/brcmfmac43143.bin
+lib/firmware/brcm/brcmfmac43143-sdio.bin
+lib/firmware/brcm/brcmfmac43362-sdio.bin
+lib/firmware/brcm/brcmfmac4354-sdio.bin
+lib/firmware/cmmb_vega_12mhz.inp
+lib/firmware/cmmb_venice_12mhz.inp
+lib/firmware/cxgb4/t4fw-1.12.25.0.bin
+lib/firmware/cxgb4/t4fw.bin
+lib/firmware/cxgb4/t5fw-1.12.25.0.bin
+lib/firmware/cxgb4/t5fw.bin
+lib/firmware/dvb-fe-drxj-mc-1.0.8.fw
+lib/firmware/dvb-fe-drxj-mc-vsb-1.0.8.fw
+lib/firmware/dvb-fe-drxj-mc-vsb-qam-1.0.8.fw
+lib/firmware/dvb-fe-xc4000-1.4.1.fw
+lib/firmware/dvb-fe-xc5000c-4.1.30.7.fw
+lib/firmware/dvb_nova_12mhz_b0.inp
+lib/firmware/dvb_nova_12mhz.inp
+lib/firmware/dvb-usb-it9135-01.fw
+lib/firmware/dvb-usb-it9135-02.fw
+lib/firmware/emi62/bitstream.fw
+lib/firmware/intel/fw_sst_0f28.bin
+lib/firmware/intel/fw_sst_0f28.bin-48kHz_i2s_master
+lib/firmware/intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq
+lib/firmware/intel/ibt-hw-37.7.10-fw-1.0.2.3.d.bseq
+lib/firmware/intel/ibt-hw-37.7.10-fw-1.80.1.2d.d.bseq
+lib/firmware/intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
+lib/firmware/intel/ibt-hw-37.8.10-fw-1.10.2.27.d.bseq
+lib/firmware/intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
+lib/firmware/intel/ibt-hw-37.8.bseq
+lib/firmware/intel/IntcSST2.bin
+lib/firmware/isdbt_nova_12mhz_b0.inp
+lib/firmware/isdbt_nova_12mhz.inp
+lib/firmware/isdbt_rio.inp
+lib/firmware/iwlwifi-3160-10.ucode
+lib/firmware/iwlwifi-3160-8.ucode
+lib/firmware/iwlwifi-3160-9.ucode
+lib/firmware/iwlwifi-7260-10.ucode
+lib/firmware/iwlwifi-7260-8.ucode
+lib/firmware/iwlwifi-7260-9.ucode
+lib/firmware/iwlwifi-7265-10.ucode
+lib/firmware/iwlwifi-7265-8.ucode
+lib/firmware/iwlwifi-7265-9.ucode
+lib/firmware/iwlwifi-7265D-10.ucode
+lib/firmware/LICENCE.Abilis
+lib/firmware/LICENCE.chelsio_firmware
+lib/firmware/LICENCE.fw_sst_0f28
+lib/firmware/LICENCE.ibt_firmware
+lib/firmware/LICENCE.IntcSST2
+lib/firmware/LICENCE.it913x
+lib/firmware/LICENCE.iwlwifi_firmware
+lib/firmware/LICENCE.qat_dh895xcc_firmware
+lib/firmware/LICENCE.r8a779x_usb3
+lib/firmware/LICENCE.siano
+lib/firmware/LICENCE.xc4000
+lib/firmware/LICENCE.xc5000c
+lib/firmware/LICENSE.amd-ucode
+lib/firmware/LICENSE.radeon
+lib/firmware/myri10ge_eth_big_z8e.dat
+lib/firmware/myri10ge_ethp_big_z8e.dat
+lib/firmware/myri10ge_ethp_z8e.dat
+lib/firmware/myri10ge_eth_z8e.dat
+lib/firmware/myri10ge_rss_eth_big_z8e.dat
+lib/firmware/myri10ge_rss_ethp_big_z8e.dat
+lib/firmware/myri10ge_rss_ethp_z8e.dat
+lib/firmware/myri10ge_rss_eth_z8e.dat
+lib/firmware/qat_895xcc.bin
+lib/firmware/ql2400_fw.bin
+lib/firmware/ql2500_fw.bin
+lib/firmware/r8a779x_usb3_v1.dlmem
+lib/firmware/radeon/bonaire_ce.bin
+lib/firmware/radeon/BONAIRE_mc2.bin
+lib/firmware/radeon/bonaire_mc.bin
+lib/firmware/radeon/bonaire_me.bin
+lib/firmware/radeon/bonaire_mec.bin
+lib/firmware/radeon/bonaire_pfp.bin
+lib/firmware/radeon/bonaire_rlc.bin
+lib/firmware/radeon/bonaire_sdma.bin
+lib/firmware/radeon/bonaire_smc.bin
+lib/firmware/radeon/BONAIRE_vce.bin
+lib/firmware/radeon/hainan_ce.bin
+lib/firmware/radeon/HAINAN_mc2.bin
+lib/firmware/radeon/hainan_mc.bin
+lib/firmware/radeon/hainan_me.bin
+lib/firmware/radeon/hainan_pfp.bin
+lib/firmware/radeon/hainan_rlc.bin
+lib/firmware/radeon/hainan_smc.bin
+lib/firmware/radeon/hawaii_ce.bin
+lib/firmware/radeon/HAWAII_ce.bin
+lib/firmware/radeon/HAWAII_mc2.bin
+lib/firmware/radeon/hawaii_mc.bin
+lib/firmware/radeon/HAWAII_mc.bin
+lib/firmware/radeon/hawaii_me.bin
+lib/firmware/radeon/HAWAII_me.bin
+lib/firmware/radeon/hawaii_mec.bin
+lib/firmware/radeon/HAWAII_mec.bin
+lib/firmware/radeon/hawaii_pfp.bin
+lib/firmware/radeon/HAWAII_pfp.bin
+lib/firmware/radeon/hawaii_rlc.bin
+lib/firmware/radeon/HAWAII_rlc.bin
+lib/firmware/radeon/hawaii_sdma.bin
+lib/firmware/radeon/HAWAII_sdma.bin
+lib/firmware/radeon/hawaii_smc.bin
+lib/firmware/radeon/HAWAII_smc.bin
+lib/firmware/radeon/kabini_ce.bin
+lib/firmware/radeon/kabini_me.bin
+lib/firmware/radeon/kabini_mec.bin
+lib/firmware/radeon/kabini_pfp.bin
+lib/firmware/radeon/kabini_rlc.bin
+lib/firmware/radeon/kabini_sdma.bin
+lib/firmware/radeon/kaveri_ce.bin
+lib/firmware/radeon/kaveri_me.bin
+lib/firmware/radeon/kaveri_mec2.bin
+lib/firmware/radeon/kaveri_mec.bin
+lib/firmware/radeon/kaveri_pfp.bin
+lib/firmware/radeon/kaveri_rlc.bin
+lib/firmware/radeon/kaveri_sdma.bin
+lib/firmware/radeon/mullins_ce.bin
+lib/firmware/radeon/MULLINS_ce.bin
+lib/firmware/radeon/mullins_me.bin
+lib/firmware/radeon/MULLINS_me.bin
+lib/firmware/radeon/mullins_mec.bin
+lib/firmware/radeon/MULLINS_mec.bin
+lib/firmware/radeon/mullins_pfp.bin
+lib/firmware/radeon/MULLINS_pfp.bin
+lib/firmware/radeon/mullins_rlc.bin
+lib/firmware/radeon/MULLINS_rlc.bin
+lib/firmware/radeon/mullins_sdma.bin
+lib/firmware/radeon/MULLINS_sdma.bin
+lib/firmware/radeon/oland_ce.bin
+lib/firmware/radeon/OLAND_mc2.bin
+lib/firmware/radeon/oland_mc.bin
+lib/firmware/radeon/oland_me.bin
+lib/firmware/radeon/oland_pfp.bin
+lib/firmware/radeon/oland_rlc.bin
+lib/firmware/radeon/oland_smc.bin
+lib/firmware/radeon/pitcairn_ce.bin
+lib/firmware/radeon/PITCAIRN_mc2.bin
+lib/firmware/radeon/pitcairn_mc.bin
+lib/firmware/radeon/pitcairn_me.bin
+lib/firmware/radeon/pitcairn_pfp.bin
+lib/firmware/radeon/pitcairn_rlc.bin
+lib/firmware/radeon/pitcairn_smc.bin
+lib/firmware/radeon/R600_uvd.bin
+lib/firmware/radeon/RS780_uvd.bin
+lib/firmware/radeon/RV770_uvd.bin
+lib/firmware/radeon/tahiti_ce.bin
+lib/firmware/radeon/TAHITI_mc2.bin
+lib/firmware/radeon/tahiti_mc.bin
+lib/firmware/radeon/tahiti_me.bin
+lib/firmware/radeon/tahiti_pfp.bin
+lib/firmware/radeon/tahiti_rlc.bin
+lib/firmware/radeon/tahiti_smc.bin
+lib/firmware/radeon/verde_ce.bin
+lib/firmware/radeon/VERDE_mc2.bin
+lib/firmware/radeon/verde_mc.bin
+lib/firmware/radeon/verde_me.bin
+lib/firmware/radeon/verde_pfp.bin
+lib/firmware/radeon/verde_rlc.bin
+lib/firmware/radeon/verde_smc.bin
+lib/firmware/README
+lib/firmware/rsi_91x.fw
+lib/firmware/rtl_nic/rtl8107e-1.fw
+lib/firmware/rtl_nic/rtl8107e-2.fw
+lib/firmware/rtl_nic/rtl8168h-1.fw
+lib/firmware/rtl_nic/rtl8168h-2.fw
+lib/firmware/rtlwifi/rtl8192cfw.bin
+lib/firmware/rtlwifi/rtl8192cfwU_B.bin
+lib/firmware/rtlwifi/rtl8192defw.bin
+lib/firmware/rtlwifi/rtl8192eefw.bin
+lib/firmware/rtlwifi/rtl8723aufw_A.bin
+lib/firmware/rtlwifi/rtl8723aufw_B.bin
+lib/firmware/rtlwifi/rtl8723aufw_B_NoBT.bin
+lib/firmware/rtlwifi/rtl8723befw.bin
+lib/firmware/rtlwifi/rtl8821aefw.bin
+lib/firmware/rtlwifi/rtl8821aefw_wowlan.bin
+lib/firmware/s5p-mfc.fw
+lib/firmware/s5p-mfc-v6.fw
+lib/firmware/s5p-mfc-v6-v2.fw
+lib/firmware/s5p-mfc-v7.fw
+lib/firmware/s5p-mfc-v8.fw
+lib/firmware/sms1xxx-hcw-55xxx-dvbt-02.fw
+lib/firmware/sms1xxx-hcw-55xxx-isdbt-02.fw
+lib/firmware/sms1xxx-nova-a-dvbt-01.fw
+lib/firmware/sms1xxx-nova-b-dvbt-01.fw
+lib/firmware/sms1xxx-stellar-dvbt-01.fw
+lib/firmware/tdmb_nova_12mhz.inp
+lib/firmware/ti-connectivity/wl18xx-fw-3.bin
+lib/firmware/ti-connectivity/wl18xx-fw-4.bin
+lib/firmware/v4l-cx23885-enc-broken.fw
+lib/firmware/WHENCE
+lib/firmware/brcm/brcmfmac4329-sdio.txt
+lib/firmware/brcm/brcmfmac4330-sdio.txt
+lib/firmware/brcm/brcmfmac43362-sdio.txt

diff --git a/config/rootfiles/core/86/filelists/wireless-regdb b/config/rootfiles/core/86/filelists/wireless-regdb
new file mode 120000 (symlink)
index 0000000..c9205b3
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/wireless-regdb
@@ -0,0 +1 @@
+../../../common/wireless-regdb
\ No newline at end of file

diff --git a/config/rootfiles/core/86/filelists/wpa_supplicant b/config/rootfiles/core/86/filelists/wpa_supplicant
new file mode 120000 (symlink)
index 0000000..1d04c03
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/wpa_supplicant
@@ -0,0 +1 @@
+../../../common/wpa_supplicant
\ No newline at end of file

diff --git a/config/rootfiles/core/86/update.sh b/config/rootfiles/core/86/update.sh
index c1ea59c4ee6e5d720a0120a3f0d82a8cc7dfbb1c..ab72e684e26a6268a5429ca005b2ec3743be47e6 100644 (file)
--- a/config/rootfiles/core/86/update.sh
+++ b/config/rootfiles/core/86/update.sh
@@ -24,15 +24,6 @@
 . /opt/pakfire/lib/functions.sh
 /usr/local/bin/backupctrl exclude >/dev/null 2>&1
 
-function add_to_backup ()
-{
-       # Add path to ROOTFILES but remove old entries to prevent double
-       # files in the tar
-       grep -v "^$1" /opt/pakfire/tmp/ROOTFILES > /opt/pakfire/tmp/ROOTFILES.tmp
-       mv /opt/pakfire/tmp/ROOTFILES.tmp /opt/pakfire/tmp/ROOTFILES
-       echo $1 >> /opt/pakfire/tmp/ROOTFILES
-}
-
 #
 # Remove old core updates from pakfire cache to save space...
 core=86
@@ -65,23 +56,6 @@ esac
 #
 KVER="xxxKVERxxx"
 
-#
-# check if we the backup file already exist
-if [ -e /var/ipfire/backup/core-upgrade${core}_${KVER}.tar.xz ]; then
-    echo Moving backup to backup-old ...
-    mv -f /var/ipfire/backup/core-upgrade${core}_${KVER}.tar.xz \
-       /var/ipfire/backup/core-upgrade${core}_${KVER}-old.tar.xz
-fi
-echo First we made a backup of all files that was inside of the
-echo update archive. This may take a while ...
-# Add some files that are not in the package to backup
-add_to_backup lib/modules
-add_to_backup boot
-
-# Backup the files
-tar cJvf /var/ipfire/backup/core-upgrade${core}_${KVER}.tar.xz \
-    -C / -T /opt/pakfire/tmp/ROOTFILES --exclude='#*' --exclude='/var/cache' > /dev/null 2>&1
-
 # Check diskspace on root
 ROOTSPACE=`df / -Pk | sed "s| * | |g" | cut -d" " -f4 | tail -n 1`
 
@@ -95,25 +69,46 @@ fi
 echo
 echo Update Kernel to $KVER ...
 #
-# Remove old kernel, configs, initrd, modules ...
+# Remove old kernel, configs, initrd, modules, dtb's ...
 #
 rm -rf /boot/System.map-*
 rm -rf /boot/config-*
 rm -rf /boot/ipfirerd-*
+rm -rf /boot/initramfs-*
 rm -rf /boot/vmlinuz-*
 rm -rf /boot/uImage-ipfire-*
 rm -rf /boot/uInit-ipfire-*
+rm -rf /boot/dtb-*-ipfire-*
 rm -rf /lib/modules
 
 case "$(uname -m)" in
        i?86)
-               # Backup grub.conf
-               cp -vf /boot/grub/grub.conf /boot/grub-legacy.conf
+               # Backup old grub config
+               if [ -f /boot/grub/grub.conf ]; then
+                       cp -vf /boot/grub/grub.conf /boot/old-grub-config
+               fi
+               if [ -f /boot/grub/menu.lst ]; then
+                       cp -vf /boot/grub/menu.lst /boot/old-grub-config
+               fi
+               if [ -f /boot/grub/grub.cfg ]; then
+                       cp -vf /boot/grub/grub.cfg /boot/old-grub-config
+               fi
 
                # Remove all files that belong to GRUB-legacy
                rm -rfv /boot/grub
                ;;
+       armv*)
+               # Backup uEnv.txt if exist
+               if [ -e /boot/uEnv.txt ]; then
+                       cp -vf /boot/uEnv.txt /boot/uEnv.txt.org
+               fi
+
+               # work around the u-boot folder detection bug
+               mkdir -pv /boot/dtb-$KVER-ipfire-kirkwood
+               mkdir -pv /boot/dtb-$KVER-ipfire-multi
+               ;;
 esac
+
 #
 #Stop services
 /etc/init.d/snort stop
@@ -125,6 +120,10 @@ esac
 #Extract files
 tar xavf /opt/pakfire/tmp/files* --no-overwrite-dir -p --numeric-owner -C /
 
+#
+#restart init because glibc was updated.
+telinit u
+
 # Check diskspace on boot
 BOOTSPACE=`df /boot -Pk | sed "s| * | |g" | cut -d" " -f4 | tail -n 1`
 
@@ -134,6 +133,8 @@ if [ $BOOTSPACE -lt 1000 ]; then
                        # Special handling for old kirkwood images.
                        # (install only kirkwood kernel)
                        rm -rf /boot/*
+                       # work around the u-boot folder detection bug
+                       mkdir -pv /boot/dtb-$KVER-ipfire-kirkwood
                        tar xavf /opt/pakfire/tmp/files* --no-overwrite-dir -p \
                                --numeric-owner -C / --wildcards 'boot/*-kirkwood*'
                        ;;
@@ -169,22 +170,16 @@ case "$(uname -m)" in
                #
                echo
                echo Update grub configuration ...
-               if grep -qE "^serial" /boot/grub-legacy.conf; then
+               if grep -qE "^serial" /boot/old-grub-config; then
                        sed -i /etc/default/grub \
-                               -e "s| panic=10 | console=ttyS0,115200n8 panic=10 |g"
+                               -e "s|panic=10|& console=ttyS0,115200n8|g"
                        echo "GRUB_TERMINAL=\"serial\"" >> /etc/default/grub
                        echo "GRUB_SERIAL_COMMAND=\"serial --unit=0 --speed=115200\"" >> /etc/default/grub
                fi
-               grub-mkconfig -o /boot/grub/grub.cfg
-
-               ROOT=$(mount | grep " / " | cut -d" " -f1)
-               ROOT=${ROOT::-1}
 
-               if ! grub-install --no-floppy --recheck "${ROOT}"; then
-                       if ! grub-install --no-floppy --recheck --force "${ROOT}"; then
-                               logger -p syslog.emerg -t ipfire \
-                                       "Could not update the bootloader!"
-                       fi
+               if ! /usr/local/bin/update-bootloader; then
+                       logger -p syslog.emerg -t ipfire \
+                               "Could not update the bootloader!"
                fi
                ;;
 esac
@@ -207,18 +202,6 @@ if [ ! "$(grep "^flags.* pae " /proc/cpuinfo)" == "" ]; then
        fi
 fi
 
-# Force reinstall xen kernel if it was installed
-if [ -e "/opt/pakfire/db/installed/meta-linux-xen" ]; then
-       echo "Name: linux-xen" > /opt/pakfire/db/installed/meta-linux-xen
-       echo "ProgVersion: 0" >> /opt/pakfire/db/installed/meta-linux-xen
-       echo "Release: 0"     >> /opt/pakfire/db/installed/meta-linux-xen
-       echo "Name: linux-xen" > /opt/pakfire/db/meta/meta-linux-xen
-       echo "ProgVersion: 0" >> /opt/pakfire/db/meta/meta-linux-xen
-       echo "Release: 0"     >> /opt/pakfire/db/meta/meta-linux-xen
-       # Add xvc0 to /etc/securetty
-       echo "xvc0" >> /etc/securetty
-fi
-
 #
 # After pakfire has ended run it again and update the lists and do upgrade
 #
@@ -233,7 +216,7 @@ echo '/opt/pakfire/pakfire update -y --force'             >> /tmp/pak_update
 echo '/opt/pakfire/pakfire upgrade -y'                    >> /tmp/pak_update
 echo '/opt/pakfire/pakfire upgrade -y'                    >> /tmp/pak_update
 echo '/opt/pakfire/pakfire upgrade -y'                    >> /tmp/pak_update
-echo '/usr/bin/logger -p syslog.emerg -t ipfire "Core-upgrade finished. If you use a customized grub.cfg"' >> /tmp/pak_update
+echo '/usr/bin/logger -p syslog.emerg -t ipfire "Core-upgrade finished. If you use a customized grub/uboot config"' >> /tmp/pak_update
 echo '/usr/bin/logger -p syslog.emerg -t ipfire "Check it before reboot !!!"' >> /tmp/pak_update
 echo '/usr/bin/logger -p syslog.emerg -t ipfire " *** Please reboot... *** "' >> /tmp/pak_update
 echo 'touch /var/run/need_reboot ' >> /tmp/pak_update

diff --git a/config/u-boot/boot.scr b/config/u-boot/boot.scr
deleted file mode 100755 (executable)
index 0fb1193..0000000
Binary files a/config/u-boot/boot.scr and /dev/null differ

diff --git a/config/u-boot/boot.script b/config/u-boot/boot.script
deleted file mode 100755 (executable)
index 2017e71..0000000
--- a/config/u-boot/boot.script
+++ /dev/null
@@ -1,7 +0,0 @@
-setenv initrd_high 90000000
-fatload mmc 0:1 0x82000000 zImage-ipfire-multi
-#fatload mmc 0:1 0x85000000 uInit-ipfire-multi
-fatload mmc 0:1 ${fdtaddr} omap4-${board_name}.dtb
-setenv bootargs video=800x600 console=tty1 rootwait smsc95xx.macaddr=$usbethaddr root=/dev/mmcblk0p3 ro
-#bootz 0x82000000 0x85000000 ${fdtaddr}
-bootz 0x82000000 - ${fdtaddr}

diff --git a/config/u-boot/convert_bootscript b/config/u-boot/convert_bootscript
deleted file mode 100755 (executable)
index 962191f..0000000
--- a/config/u-boot/convert_bootscript
+++ /dev/null
@@ -1 +0,0 @@
-mkimage -A arm -T script -C none -d boot.script boot.scr

diff --git a/config/u-boot/uEnv.txt b/config/u-boot/uEnv.txt
new file mode 100755 (executable)
index 0000000..bc3facc
--- /dev/null
+++ b/config/u-boot/uEnv.txt
@@ -0,0 +1,4 @@
+uenvcmd=if test "$board" = "panda" ;then run bootpanda; else run bootbananapi; fi;
+KVER=xxxKVERxxx
+bootpanda=setenv initrd_high 90000000; fatload mmc 0:1 0x82000000 zImage-ipfire-multi; fatload mmc 0:1 ${fdtaddr} dtb-${KVER}-ipfire-multi/${fdtfile};              setenv bootargs video=800x600 console=tty1 rootwait smsc95xx.macaddr=$usbethaddr root=/dev/mmcblk0p3 ro;           bootz 0x82000000 - ${fdtaddr};
+bootbananapi=setenv fdt_high ffffffff; fatload mmc 0:1 0x46000000 zImage-ipfire-multi; fatload mmc 0:1 0x49000000 dtb-${KVER}-ipfire-multi/sun7i-a20-bananapi.dtb;  setenv bootargs console=ttyS0,115200n8 rootwait root=/dev/mmcblk0p3 rootwait;                                      bootz 0x46000000 - 0x49000000;

diff --git a/html/cgi-bin/wlanap.cgi b/html/cgi-bin/wlanap.cgi
index 50806ac787b219685e682cd1d01d8aaeb1b50dab..ec9022ddfad8305013f9efd1200818726c33bbf2 100644 (file)
--- a/html/cgi-bin/wlanap.cgi
+++ b/html/cgi-bin/wlanap.cgi
@@ -65,7 +65,7 @@ $wlanapsettings{'SSID'} = 'IPFire';
 $wlanapsettings{'HIDESSID'} = 'off';
 $wlanapsettings{'ENC'} = 'wpa2';               # none / wpa1 /wpa2
 $wlanapsettings{'TXPOWER'} = 'auto';
-$wlanapsettings{'CHANNEL'} = '05';
+$wlanapsettings{'CHANNEL'} = '6';
 $wlanapsettings{'COUNTRY'} = '00';
 $wlanapsettings{'HW_MODE'} = 'g';
 $wlanapsettings{'PWD'} = 'IPFire-2.x';
@@ -272,7 +272,7 @@ my @temp;
 foreach (@channellist_cmd){
 $_ =~ /(.*) \[(\d+)(.*)\]/;
 $channel = $2;chomp $channel;
-if ( $channel =~ /\d+/ ){push(@temp,$channel);}
+if ( $channel =~ /\d+/ ){push(@temp,$channel + 0);}
 }
 @channellist = @temp;
 } else {
@@ -283,7 +283,7 @@ my @temp;
 foreach (@channellist_cmd){
 $_ =~ /(.*)Channel (\d+)(.*):/;
 $channel = $2;chomp $channel;
-if ( $channel =~ /\d+/ ){push(@temp,$channel);}
+if ( $channel =~ /\d+/ ){push(@temp,$channel + 0);}
 }
 @channellist = @temp;
 }
@@ -291,7 +291,7 @@ if ( $channel =~ /\d+/ ){push(@temp,$channel);}
 my @countrylist_cmd = `regdbdump /usr/lib/crda/regulatory.bin 2>/dev/null`;
 # get available country codes
 
-my @temp;
+my @temp = "00";
 foreach (@countrylist_cmd){
 $_ =~ /country (.*):/;
 $country = $1;chomp $country;

diff --git a/lfs/backports b/lfs/backports
new file mode 100644 (file)
index 0000000..0eebe81
--- /dev/null
+++ b/lfs/backports
@@ -0,0 +1,132 @@
+###############################################################################
+#                                                                             #
+# IPFire.org - A linux based firewall                                         #
+# Copyright (C) 2007-2015  IPFire Team <info@ipfire.org>                      #
+#                                                                             #
+# This program is free software: you can redistribute it and/or modify        #
+# it under the terms of the GNU General Public License as published by        #
+# the Free Software Foundation, either version 3 of the License, or           #
+# (at your option) any later version.                                         #
+#                                                                             #
+# This program is distributed in the hope that it will be useful,             #
+# but WITHOUT ANY WARRANTY; without even the implied warranty of              #
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the               #
+# GNU General Public License for more details.                                #
+#                                                                             #
+# You should have received a copy of the GNU General Public License           #
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.       #
+#                                                                             #
+###############################################################################
+
+###############################################################################
+# Definitions
+###############################################################################
+
+include Config
+
+VERSUFIX   = ipfire$(KCFG)
+
+VER        = 3.18.1-1
+
+THISAPP    = backports-$(VER)
+DL_FILE    = $(THISAPP).tar.xz
+DL_FROM    = $(URL_IPFIRE)
+DIR_APP    = $(DIR_SRC)/$(THISAPP)
+TARGET     = $(DIR_INFO)/$(THISAPP)-kmod-$(KVER)-$(VERSUFIX)
+
+#ifeq "$(MACHINE_TYPE)" "arm"
+CFLAGS   += -fno-PIC
+#endif
+
+###############################################################################
+# Top-level Rules
+###############################################################################
+
+objects = $(DL_FILE)
+
+$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
+
+$(DL_FILE)_MD5 = 6cef5f2c800e12441d2cba9fa42b6a5b
+
+install : $(TARGET)
+
+check : $(patsubst %,$(DIR_CHK)/%,$(objects))
+
+download :$(patsubst %,$(DIR_DL)/%,$(objects))
+
+md5 : $(subst %,%_MD5,$(objects))
+
+dist: 
+       $(PAK)
+
+###############################################################################
+# Downloading, checking, md5sum
+###############################################################################
+
+$(patsubst %,$(DIR_CHK)/%,$(objects)) :
+       @$(CHECK)
+
+$(patsubst %,$(DIR_DL)/%,$(objects)) :
+       @$(LOAD)
+
+$(subst %,%_MD5,$(objects)) :
+       @$(MD5)
+
+###############################################################################
+# Installation Details
+###############################################################################
+
+$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
+       @$(PREBUILD)
+       @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar Jxf $(DIR_DL)/$(DL_FILE)
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/backports-3.18.1-1-ipfire-build.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/backports-3.18.1-1-grsecurity.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/backports-3.18.1-1-add_usbnet_modules.patch
+
+       # DVB patches
+       cd $(DIR_APP) && patch -Np2 < $(DIR_SRC)/src/patches/v4l-dvb_fix_tua6034_pll.patch
+
+       # Wlan patches
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/compat-drivers-3.8.3-ath_ignore_eeprom_regdomain.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.14.22-iwlwifi-noibss_only_on_radar_chan.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10.37-rt2800usb_add_dlink_dwa137_usbid.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/backports-3.18.1-1_add_libertas_uap.patch
+
+       # smsc mac address patch for pandaboard and raspberry pi
+ifeq "$(KCFG)" "-multi"
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10-smsc95xx-add_mac_addr_param.patch
+endif
+ifeq "$(KCFG)" "-rpi"
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10-smsc95xx-add_mac_addr_param.patch
+endif
+
+       # generate config
+       cd $(DIR_APP) && make KLIB=/lib/modules/$(KVER)-$(VERSUFIX)/ allmodconfig
+
+       # Disable some settings
+       cd $(DIR_APP) && sed -i -e "s/CPTCFG_CFG80211_DEVELOPER_WARNINGS=y/# CPTCFG_CFG80211_DEVELOPER_WARNINGS is not set/g" .config
+       cd $(DIR_APP) && sed -i -e "s/CPTCFG_CFG80211_CERTIFICATION_ONUS=y/# CPTCFG_CFG80211_CERTIFICATION_ONUS is not set/g" .config
+       cd $(DIR_APP) && sed -i -e "s/CPTCFG_CFG80211_REG_CELLULAR_HINTS=y/# CPTCFG_CFG80211_REG_CELLULAR_HINTS is not set/g" .config
+       cd $(DIR_APP) && sed -i -e "s/CPTCFG_CFG80211_REG_RELAX_NO_IR=y/# CPTCFG_CFG80211_REG_RELAX_NO_IR is not set/g" .config
+       cd $(DIR_APP) && sed -i -e "s/CPTCFG_CFG80211_INTERNAL_REGDB=y/# CPTCFG_CFG80211_INTERNAL_REGDB is not set/g" .config
+       cd $(DIR_APP) && sed -i -e "s/CPTCFG_CFG80211_DEFAULT_PS=y/# CPTCFG_CFG80211_DEFAULT_PS is not set/g" .config
+       cd $(DIR_APP) && sed -i -e "s/CPTCFG_NFC=m/# CPTCFG_NFC is not set/g" .config
+
+       # Disable some modules (build fail)
+       cd $(DIR_APP) && sed -i -e "s/CPTCFG_VIDEO_VIA_CAMERA=m/# CPTCFG_VIDEO_VIA_CAMERA is not set/g" .config
+
+       # Disable DEBUG
+       cd $(DIR_APP) && sed -i -e "s/.*DEBUG=y/# & is not set/g" .config
+       cd $(DIR_APP) && sed -i -e "s/.*DEBUGFS=y/# & is not set/g" .config
+       cd $(DIR_APP) && sed -i -e "s/=y is not set/ is not set/g" .config
+
+       # Disable OF_GRAPH (not supported by kernel 3.14)
+       cd $(DIR_APP) && sed -i -e "s/CONFIG_OF/CONFIG_OF_IGNORE/g" include/linux/of_graph.h
+
+       cd $(DIR_APP) && make $(MAKETUNING) KLIB=/lib/modules/$(KVER)-$(VERSUFIX)/ install
+
+       # Remove vsp1 module (not mach to our platforms)
+       rm -rf /lib/modules/$(KVER)-$(VERSUFIX)/kernel/drivers/media/platform/vsp1
+
+       @rm -rf $(DIR_APP)
+       @$(POSTBUILD)

diff --git a/lfs/crda b/lfs/crda
index e87b7adbd3fdf73c8afbdf0e3bf2444cb0dc13c6..8bee2584ba496dfdc79a6d00773882232365badf 100644 (file)
--- a/lfs/crda
+++ b/lfs/crda
@@ -24,10 +24,10 @@
 
 include Config
 
-VER        = 1.1.3
+VER        = 3.13
 
 THISAPP    = crda-$(VER)
-DL_FILE    = $(THISAPP).tar.bz2
+DL_FILE    = $(THISAPP).tar.xz
 DL_FROM    = $(URL_IPFIRE)
 DIR_APP    = $(DIR_SRC)/$(THISAPP)
 
@@ -41,7 +41,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_MD5 = 29579185e06a75675507527243d28e5c
+$(DL_FILE)_MD5 = 66b1b0417c1ad19f0009a5c0c0c1aebc
 
 install : $(TARGET)
 
@@ -70,8 +70,8 @@ $(subst %,%_MD5,$(objects)) :
 
 $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
        @$(PREBUILD)
-       @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar jxf $(DIR_DL)/$(DL_FILE)
-       cd $(DIR_APP) && USE_OPENSSL=1 make $(MAKETUNING)
-       cd $(DIR_APP) && USE_OPENSSL=1 make install
+       @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
+       cd $(DIR_APP) && make $(MAKETUNING)
+       cd $(DIR_APP) && make install
        @rm -rf $(DIR_APP)
        @$(POSTBUILD)

diff --git a/lfs/dvb-firmwares b/lfs/dvb-firmwares
index cd029e21f89d9c700eee873f928c2abd29439307..a3833da931d0f922565dc37da76e7e59027176c6 100644 (file)
--- a/lfs/dvb-firmwares
+++ b/lfs/dvb-firmwares
@@ -1,7 +1,7 @@
 ###############################################################################
 #                                                                             #
 # IPFire.org - A linux based firewall                                         #
-# Copyright (C) 2007-2012  IPFire Team  <info@ipfire.org>                     #
+# Copyright (C) 2007-2015  IPFire Team  <info@ipfire.org>                     #
 #                                                                             #
 # This program is free software: you can redistribute it and/or modify        #
 # it under the terms of the GNU General Public License as published by        #
@@ -24,10 +24,10 @@
 
 include Config
 
-VER        = 20110802
+VER        = 20141125
 
 THISAPP    = dvb-firmwares-$(VER)
-DL_FILE    = $(THISAPP).tar.bz2
+DL_FILE    = $(THISAPP).tar.xz
 DL_FROM    = $(URL_IPFIRE)
 DIR_APP    = $(DIR_SRC)/dvb-firmwares
 TARGET     = $(DIR_INFO)/$(THISAPP)
@@ -40,7 +40,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_MD5 = 330e19f9444a03f5338bab590ab9d728
+$(DL_FILE)_MD5 = 3c7182522dc091b506d2120d71a6a360
 
 install : $(TARGET)
 

diff --git a/lfs/fireinfo b/lfs/fireinfo
index 0bc8d44dab30cf7a5d34acdcf6bf3f2b75c151d7..78a5e37a69bf73963102299759cf58ca8d529907 100644 (file)
--- a/lfs/fireinfo
+++ b/lfs/fireinfo
@@ -73,6 +73,7 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
 
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/fireinfo/0001-bogomips-Don-t-crash-when-no-bogomips-are-available.patch
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/fireinfo/0002-ARM-Read-board-model-from-device-tree-in-proc.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/fireinfo/0003-Revert-vendor-model-for-ARM-to-old-behaviour.patch
 
        cd $(DIR_APP) && [ -x "configure" ] || sh ./autogen.sh
        cd $(DIR_APP) && ./configure --prefix=/usr

diff --git a/lfs/flash-images b/lfs/flash-images
index d2050b4ab3ead388f4b86e55f0845aaebabd57e5..6c88180598b659dfa2ae79f77a5be3e9c4cf6592 100644 (file)
--- a/lfs/flash-images
+++ b/lfs/flash-images
@@ -75,9 +75,9 @@ else
 endif
 
 # /boot:  64MB - OFFSET
-# /    : 700MB
+# /    : 750MB
 S_BOOT := $(shell echo $$(( 131072 - $(S_OFFSET) )))
-S_ROOT := 1433600
+S_ROOT := 1536000
 
 PADDING = 100 # MB
 
@@ -116,11 +116,14 @@ endif
        mkdir -pv $(MNThdd)/boot
        mount $(PART_BOOT) $(MNThdd)/boot
 
-       # Install MLO and uboot first
+       # Install Pandaboard MLO and uboot first
 ifeq "$(MACHINE_TYPE)" "arm"
        cp -v /boot/MLO $(MNThdd)/boot/
        cp -v /boot/u-boot.img $(MNThdd)/boot/
        cp -v /boot/zImage-ipfire-multi $(MNThdd)/boot/
+       # work around a u-boot bug not find the folders sometimes
+       mkdir -pv $(MNThdd)/boot/dtb-$(KVER)-ipfire-multi
+       mkdir -pv $(MNThdd)/boot/dtb-$(KVER)-ipfire-kirkwood
        sync
        umount $(MNThdd)/boot
        mount $(PART_BOOT) $(MNThdd)/boot
@@ -148,8 +151,7 @@ ifeq "$(SCON)" "1"
 
 ifeq "$(MACHINE_TYPE)" "arm"
        sed -i -e "s| console=tty1 | console=ttyAMA0,115200n8 |g" $(MNThdd)/boot/cmdline.txt
-       sed -i -e "s| console=tty1 | console=ttyO2,115200n8 |g" $(MNThdd)/boot/boot.script
-       cd $(MNThdd)/boot && ./convert_bootscript
+       sed -i -e "s| console=tty1 | console=ttyO2,115200n8 |g" $(MNThdd)/boot/uEnv.txt
 endif
 endif
 
@@ -216,6 +218,11 @@ endif
        # not copied to a block device)
        dd if=/dev/zero bs=1M count=$(PADDING) >> $(IMG)
 
+ifeq "$(MACHINE_TYPE)" "arm"
+       # Install u-boot for LeMaker Banana Pi into image 8KB
+       dd if=/usr/share/u-boot/banana_pi/u-boot-sunxi-with-spl.bin of=$(IMG) bs=1K seek=8 conv=notrunc
+endif
+
        # Compress Image
        pigz -f9 < $(IMG) > $(IMAGE_FILE)
        rm -rf $(IMG) $(MNThdd)

diff --git a/lfs/fping b/lfs/fping
index 6418686448ac411193d5ec3baeec0679bbec7aa2..11939b6cc20dc29304ecc3e69185067fdceb59ba 100644 (file)
--- a/lfs/fping
+++ b/lfs/fping
@@ -1,7 +1,7 @@
 ###############################################################################
 #                                                                             #
 # IPFire.org - A linux based firewall                                         #
-# Copyright (C) 2007  Michael Tremer & Christian Schmidt                      #
+# Copyright (C) 2015  IPFire Team  <info@ipfire.org>                          #
 #                                                                             #
 # This program is free software: you can redistribute it and/or modify        #
 # it under the terms of the GNU General Public License as published by        #
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 3.4
+VER        = 3.10
 
 THISAPP    = fping-$(VER)
 DL_FILE    = $(THISAPP).tar.gz
@@ -32,7 +32,7 @@ DL_FROM    = $(URL_IPFIRE)
 DIR_APP    = $(DIR_SRC)/$(THISAPP)
 TARGET     = $(DIR_INFO)/$(THISAPP)
 PROG       = fping
-PAK_VER    = 2
+PAK_VER    = 3
 
 DEPS       = ""
 
@@ -44,7 +44,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_MD5 = a4bc97804e630dbf26dfac8f28c78091
+$(DL_FILE)_MD5 = 6a0ddecb671df1d580d20c0dd1095773
 
 install : $(TARGET)
 

diff --git a/lfs/glibc b/lfs/glibc
index df3e39224f749f264de68ed2cdcacc659d2bc840..11d374e3b886a13fabdfbfca70309112c22ef3e7 100644 (file)
--- a/lfs/glibc
+++ b/lfs/glibc
@@ -268,12 +268,21 @@ endif
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh966775.patch
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh966778.patch
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh970090.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh995972.patch
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh1008310.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh1019916.patch
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh1022022.patch
-       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh1091162.patch
-       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh1098050.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh1027101.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh1027261.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh1032628.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh1044628.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh1111460.patch
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh1133809-1.patch
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh1133809-2.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh1139571.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh1154563.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh1170121.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc/glibc-rh1183533.patch
 
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc-resolv-stack_chk_fail.patch
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/glibc-remove-ctors-dtors-output-sections.patch

diff --git a/lfs/hostapd b/lfs/hostapd
index dbf909d54f36792f810632a380a16ba982c1c958..74c2ae86ef37a644b8bbce04b51995ba374ca6e3 100644 (file)
--- a/lfs/hostapd
+++ b/lfs/hostapd
@@ -1,7 +1,7 @@
 ###############################################################################
 #                                                                             #
 # IPFire.org - A linux based firewall                                         #
-# Copyright (C) 2007-2014  IPFire Team  <info@ipfire.org>                     #
+# Copyright (C) 2007-2015  IPFire Team  <info@ipfire.org>                     #
 #                                                                             #
 # This program is free software: you can redistribute it and/or modify        #
 # it under the terms of the GNU General Public License as published by        #
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 2.2
+VER        = 2.3
 
 THISAPP    = hostapd-$(VER)
 DL_FILE    = $(THISAPP).tar.gz
@@ -32,7 +32,7 @@ DL_FROM    = $(URL_IPFIRE)
 DIR_APP    = $(DIR_SRC)/$(THISAPP)
 TARGET     = $(DIR_INFO)/$(THISAPP)
 PROG       = hostapd
-PAK_VER    = 30
+PAK_VER    = 33
 
 DEPS       = ""
 
@@ -44,7 +44,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_MD5 = 23c1f78a693c3288802d516adb7fd289
+$(DL_FILE)_MD5 = 40b89c61036add0c2dd1fc10767d3b5f
 
 install : $(TARGET)
 

diff --git a/lfs/initscripts b/lfs/initscripts
index 4894710ac371923dc6c0921723e69593fbb9f726..f656c72a7458025459f1481a568a1721f4059804 100644 (file)
--- a/lfs/initscripts
+++ b/lfs/initscripts
@@ -1,7 +1,7 @@
 ###############################################################################
 #                                                                             #
 # IPFire.org - A linux based firewall                                         #
-# Copyright (C) 2010  IPFire Team  <info@ipfire.org>                          #
+# Copyright (C) 2007-2015  IPFire Team  <info@ipfire.org>                     #
 #                                                                             #
 # This program is free software: you can redistribute it and/or modify        #
 # it under the terms of the GNU General Public License as published by        #
@@ -194,10 +194,12 @@ $(TARGET) :
                ln -sf any /etc/rc.d/init.d/networking/$$i; \
        done
 
-       # ARM does not need checkfstab and acpid
+       # ARM does not need checkfstab and acpid, intel no swconfig
 ifeq "$(MACHINE_TYPE)" "arm"
        rm -vf /etc/rc.d/init.d/{acpid,checkfstab}
+       ln -sf ../init.d/swconfig    /etc/rc.d/rcsysinit.d/S73swconfig
 else
+       rm -vf /etc/rc.d/init.d/swconfig
        ln -sf ../init.d/acpid       /etc/rc.d/rc3.d/S12acpid
        ln -sf ../init.d/acpid       /etc/rc.d/rc0.d/K87acpid
        ln -sf ../init.d/acpid       /etc/rc.d/rc6.d/K87acpid

diff --git a/lfs/iw b/lfs/iw
index e55bc5c35da13e8d6158436d09410f70686ee117..2d4ad34e4fb458a4622230bde9e10ac7059a403e 100644 (file)
--- a/lfs/iw
+++ b/lfs/iw
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 3.10
+VER        = 3.14
 
 THISAPP    = iw-$(VER)
 DL_FILE    = $(THISAPP).tar.xz
@@ -40,7 +40,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_MD5 = 07219ad06535bc270f7a8873aba6d5fa
+$(DL_FILE)_MD5 = 66e41053f6fc0781b683b5b688442de6
 
 install : $(TARGET)
 

diff --git a/lfs/kbd b/lfs/kbd
index 1c9924279826e38c26702ad116da225d09b8c34c..bb9d261a7d5cbbcf16051107a7e8bfb71adb5885 100644 (file)
--- a/lfs/kbd
+++ b/lfs/kbd
@@ -35,13 +35,18 @@ TARGET     = $(DIR_INFO)/$(THISAPP)
 ###############################################################################
 # Top-level Rules
 ###############################################################################
-objects = $(DL_FILE) $(THISAPP)-more-programs-1.patch
+objects = $(DL_FILE) $(THISAPP)-more-programs-1.patch \
+       kbd-latarcyrheb-16-fixed.tar.bz2 kbd-latsun-fonts.tar.bz2
 
 $(DL_FILE)                            = $(DL_FROM)/$(DL_FILE)
 $(THISAPP)-more-programs-1.patch      = $(DL_FROM)/kbd-$(VER)-more-programs-1.patch
+kbd-latarcyrheb-16-fixed.tar.bz2      = $(DL_FROM)/kbd-latarcyrheb-16-fixed.tar.bz2
+kbd-latsun-fonts.tar.bz2              = $(DL_FROM)/kbd-latsun-fonts.tar.bz2
 
 $(DL_FILE)_MD5                        = 069d1175b4891343b107a8ac2b4a39f6
 $(THISAPP)-more-programs-1.patch_MD5  = dc70180a6bc0afa2b741cd38e3cc2e18
+kbd-latarcyrheb-16-fixed.tar.bz2_MD5  = 884fdbb0b952b2e3e8389a0c40a3e301
+kbd-latsun-fonts.tar.bz2_MD5          = e22ee88353968df8d4a4b1bf1fa8fc31
 
 install : $(TARGET)
 
@@ -74,6 +79,11 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/$(THISAPP)-more-programs-1.patch
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/$(THISAPP)-backspace-1.patch
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/$(THISAPP)-gcc4_fixes-1.patch
+
+       # Extract our own fonts
+       cd $(DIR_APP) && tar xvfa $(DIR_DL)/kbd-latarcyrheb-16-fixed.tar.bz2
+       cd $(DIR_APP) && tar xvfa $(DIR_DL)/kbd-latsun-fonts.tar.bz2
+
        cd $(DIR_APP) && ./configure --datadir=/lib/kbd --disable-nls
        cd $(DIR_APP) && make $(MAKETUNING)
        cd $(DIR_APP) && make install

diff --git a/lfs/linux b/lfs/linux
index 2644711c9543ce3a2eb1587914b0641589d08072..d92bdfee301be269b2a6ac49af3ad877dd868363 100644 (file)
--- a/lfs/linux
+++ b/lfs/linux
@@ -1,7 +1,7 @@
 ###############################################################################
 #                                                                             #
 # IPFire.org - A linux based firewall                                         #
-# Copyright (C) 2007-2014  IPFire Team <info@ipfire.org>                      #
+# Copyright (C) 2007-2015  IPFire Team <info@ipfire.org>                      #
 #                                                                             #
 # This program is free software: you can redistribute it and/or modify        #
 # it under the terms of the GNU General Public License as published by        #
@@ -24,11 +24,11 @@
 
 include Config
 
-VER        = 3.14.25
+VER        = 3.14.32
 
-RPI_PATCHES = 3.14.25-grsec-ipfire1
-A7M_PATCHES = 3.14.25-grsec-ipfire1
-GRS_PATCHES = grsecurity-3.0-3.14.25-201411220954.patch.xz
+RPI_PATCHES = 3.14.32-grsec-ipfire1
+A7M_PATCHES = 3.14.32-grsec-ipfire1
+GRS_PATCHES = grsecurity-3.0-3.14.32-201502062101.patch.xz
 
 THISAPP    = linux-$(VER)
 DL_FILE    = linux-$(VER).tar.xz
@@ -37,7 +37,7 @@ DIR_APP    = $(DIR_SRC)/$(THISAPP)
 CFLAGS     =
 CXXFLAGS   =
 
-PAK_VER    = 53
+PAK_VER    = 58
 DEPS      = ""
 
 VERSUFIX=ipfire$(KCFG)
@@ -77,10 +77,10 @@ rpi-patches-$(RPI_PATCHES).patch.xz         = $(URL_IPFIRE)/rpi-patches-$(RPI_PATCHES).
 arm7-multi-patches-$(A7M_PATCHES).patch.xz     = $(URL_IPFIRE)/arm7-multi-patches-$(A7M_PATCHES).patch.xz
 $(GRS_PATCHES)                                 = $(URL_IPFIRE)/$(GRS_PATCHES)
 
-$(DL_FILE)_MD5                                 = 3ae910d35292706d85870c3939547123
-rpi-patches-$(RPI_PATCHES).patch.xz_MD5                = b573af847c28ebed8c15a74542360db1
-arm7-multi-patches-$(A7M_PATCHES).patch.xz_MD5 = 8b47b81a530db68cb2c2f6bb6418ca28
-$(GRS_PATCHES)_MD5                             = 6b2c8669e39304cfe647f9de16260929
+$(DL_FILE)_MD5                                 = 3178fb8f6f1eafcffdd730fec68754f8
+rpi-patches-$(RPI_PATCHES).patch.xz_MD5                = 375dc501711ff3ffeffdfc9848675d26
+arm7-multi-patches-$(A7M_PATCHES).patch.xz_MD5 = efcfe5889f120d879387dd4ebe881587
+$(GRS_PATCHES)_MD5                             = c1565eb2a630a673f3ace31a6901e251
 
 install : $(TARGET)
 
@@ -140,6 +140,8 @@ endif
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.14.22-iwlwifi-noibss_only_on_radar_chan.patch
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10.37-rt2800usb_add_dlink_dwa137_usbid.patch
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10.55-rt2800usb-change_queue_warn_to_debug.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.14.25_rt2x00_fix_bss_bcn_num.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.14.25-rt5592_no_special_txop_init.patch
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10.39-add_libertas_uap.patch
 
        # mISDN Patches
@@ -159,6 +161,9 @@ endif
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.2.33_ipg-fix-driver-name.patch
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.27_mcs7830-fix-driver-name.patch
 
+       # r8169 L23 patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.14.32-r8169_disable_L23.patch
+
 ifeq "$(KCFG)" "-kirkwood"
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10.10-mv_cesa_disable_failing_hmac_sha1.patch
        cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.14.22-kirkwood_legacy_boot.patch
@@ -169,6 +174,12 @@ ifeq "$(KCFG)" "-multi"
 
        # Apply Arm7-multiarch kernel patches.
        cd $(DIR_APP) && xzcat $(DIR_DL)/arm7-multi-patches-$(A7M_PATCHES).patch.xz | patch -Np1
+
+       # Update Banana Pi, Lamobo-R1 and add Banana Pro dtb
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.14.x-update_banana_dts.patch
+
+       # Install switch api userspace header
+       cd $(DIR_APP) && install -v -m644 include/uapi/linux/switch.h /usr/include/linux/
 endif
 
 ifeq "$(KCFG)" "-rpi"

diff --git a/lfs/linux-firmware b/lfs/linux-firmware
index 1dbfc7e00cb1fd74e30fc753110bd26d4873bc53..1378f328d1ac3763b349ba2ce510b5d5d7e317a5 100644 (file)
--- a/lfs/linux-firmware
+++ b/lfs/linux-firmware
@@ -1,7 +1,7 @@
 ###############################################################################
 #                                                                             #
 # IPFire.org - A linux based firewall                                         #
-# Copyright (C) 2007-2014  IPFire Team  <info@ipfire.org>                     #
+# Copyright (C) 2007-2015  IPFire Team  <info@ipfire.org>                     #
 #                                                                             #
 # This program is free software: you can redistribute it and/or modify        #
 # it under the terms of the GNU General Public License as published by        #
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 52d77db
+VER        = 78535e8
 
 THISAPP    = linux-firmware-$(VER)
 DL_FILE    = $(THISAPP).tar.xz
@@ -40,7 +40,8 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_MD5 = 3f6f1e78af3ee67a5540355f2ed8ba14
+$(DL_FILE)_MD5 = a4cafb924fbcaeb34d1b464be0e4d089
+
 install : $(TARGET)
 
 check : $(patsubst %,$(DIR_CHK)/%,$(objects))

diff --git a/lfs/mtr b/lfs/mtr
index ca0839606cc7c0bf6378c77e85cbb471b579212a..abb6e8ea3912d087f22da829d703eca4749f12ea 100644 (file)
--- a/lfs/mtr
+++ b/lfs/mtr
@@ -1,7 +1,7 @@
 ###############################################################################
 #                                                                             #
 # IPFire.org - A linux based firewall                                         #
-# Copyright (C) 2007  Michael Tremer & Christian Schmidt                      #
+# Copyright (C) 2015  IPFire Team  <info@ipfire.org>                          #
 #                                                                             #
 # This program is free software: you can redistribute it and/or modify        #
 # it under the terms of the GNU General Public License as published by        #
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 0.82
+VER        = 0.86
 
 THISAPP    = mtr-$(VER)
 DL_FILE    = $(THISAPP).tar.gz
@@ -32,7 +32,7 @@ DL_FROM    = $(URL_IPFIRE)
 DIR_APP    = $(DIR_SRC)/$(THISAPP)
 TARGET     = $(DIR_INFO)/$(THISAPP)
 PROG       = mtr
-PAK_VER    = 1
+PAK_VER    = 2
 
 DEPS       = ""
 
@@ -44,7 +44,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_MD5 = 10601ea543fda3e51545c4bce195b64c
+$(DL_FILE)_MD5 = 8d63592c9d4579ef20cf491b41843eb2
 
 install : $(TARGET)
 

diff --git a/lfs/ntp b/lfs/ntp
index a6f7ff6758ecec997844777bb1cf5db48abfba9a..c3d8d5855edc8fcaf27ac1cf55b0f5b13f5ecad0 100644 (file)
--- a/lfs/ntp
+++ b/lfs/ntp
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 4.2.6p5
+VER        = 4.2.8
 
 THISAPP    = ntp-$(VER)
 DL_FILE    = $(THISAPP).tar.gz
@@ -40,7 +40,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_MD5 = 00df80a84ec9528fcfb09498075525bc
+$(DL_FILE)_MD5 = 6972a626be6150db8cfbd0b63d8719e7
 
 install : $(TARGET)
 

diff --git a/lfs/openssl b/lfs/openssl
index 186ea6c6ae49377e1bfb1f1be5a661a316cf395f..eae2c6e53aa8b7d7c1ba10314d0cd41c9d2d95ff 100644 (file)
--- a/lfs/openssl
+++ b/lfs/openssl
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 1.0.1j
+VER        = 1.0.1k
 
 THISAPP    = openssl-$(VER)
 DL_FILE    = $(THISAPP).tar.gz
@@ -51,7 +51,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_MD5 = f7175c9cd3c39bb1907ac8bba9df8ed3
+$(DL_FILE)_MD5 = d4f002bd22a56881340105028842ae1f
 
 install : $(TARGET)
 

diff --git a/lfs/openssl-compat b/lfs/openssl-compat
index 683d979ae04b4601e5f8f48b76c625ff02b5dc91..52a8e911394021da9a16485a6e9688f5ba76bba5 100644 (file)
--- a/lfs/openssl-compat
+++ b/lfs/openssl-compat
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 0.9.8zc
+VER        = 0.9.8zd
 
 THISAPP    = openssl-$(VER)
 DL_FILE    = $(THISAPP).tar.gz
@@ -40,7 +40,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_MD5 = 1b239eea3a60d67863e7b66700e47a16
+$(DL_FILE)_MD5 = e9b9ee12f2911e1a378e2458d9bfff77
 
 install : $(TARGET)
 

diff --git a/lfs/openvpn b/lfs/openvpn
index 8c7c81a4916843702b71031ae9e222fc795db05d..44a8b469785b2fd916b91b7f929063fc055046d1 100644 (file)
--- a/lfs/openvpn
+++ b/lfs/openvpn
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 2.3.4
+VER        = 2.3.6
 
 THISAPP    = openvpn-$(VER)
 DL_FILE    = $(THISAPP).tar.xz
@@ -40,7 +40,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_MD5 = 9b70be9fb45e407117c3c9b118e4ba22
+$(DL_FILE)_MD5 = bcc30c296566df14feebdd8aa0e408ca
 
 install : $(TARGET)
 

diff --git a/lfs/pound b/lfs/pound
index 20e807d18707c2d472574046b55d74fb99b4123e..a0f6f290652137c4ee2b0f54517a19c04ffc645e 100644 (file)
--- a/lfs/pound
+++ b/lfs/pound
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 2.7c
+VER        = 2.7
 
 THISAPP    = Pound-$(VER)
 DL_FILE    = $(THISAPP).tgz
@@ -32,7 +32,7 @@ DL_FROM    = $(URL_IPFIRE)
 DIR_APP    = $(DIR_SRC)/$(THISAPP)
 TARGET     = $(DIR_INFO)/$(THISAPP)
 PROG       = pound
-PAK_VER    = 6
+PAK_VER    = 7
 
 DEPS       = ""
 
@@ -44,7 +44,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_MD5 = 56dace6b79c6be1d25b31355269c380a
+$(DL_FILE)_MD5 = ec8298aa3e4aee3ffbecdc0639d7f14a
 
 install : $(TARGET)
 

diff --git a/lfs/squid-accounting b/lfs/squid-accounting
index 0dca63f751f4c43aa036d8fa53954c740fe7e194..9ef8324110ead048ba52f379518bbac781bc972c 100644 (file)
--- a/lfs/squid-accounting
+++ b/lfs/squid-accounting
@@ -15,7 +15,7 @@ THISAPP    = squid-accounting-$(VER)
 DIR_APP    = $(DIR_SRC)/$(THISAPP)
 TARGET     = $(DIR_INFO)/$(THISAPP)
 PROG       = squid-accounting
-PAK_VER    = 3
+PAK_VER    = 4
 
 DEPS       = "perl-DBI perl-DBD-SQLite perl-File-ReadBackwards perl-PDF-API2 sendEmail"
 

diff --git a/lfs/stage2 b/lfs/stage2
index ede9d2bddf7f07cde8571d15c31f343ca7a76806..4388114c1296ba0aac999b9b61811cfda49c38bd 100644 (file)
--- a/lfs/stage2
+++ b/lfs/stage2
@@ -49,7 +49,7 @@ $(TARGET) :
        @$(PREBUILD)
 
        # Create directories
-       -mkdir -pv /{bin,boot,etc/opt,etc/modprobe.d,home,lib,mnt,opt,run}
+       -mkdir -pv /{bin,boot,etc/opt,etc/modprobe.d,home,lib/firmware/brcm,mnt,opt,run}
        -mkdir -pv /{media/{floppy,cdrom,usbkey},sbin,srv,var}
        -install -dv -m 0750 /root
        -install -dv -m 1777 /tmp /var/tmp
@@ -75,6 +75,7 @@ $(TARGET) :
 
        # Config files
        cp -rvf $(DIR_SRC)/config/etc/* /etc;
+       cp -rvf $(DIR_SRC)/config/lib/* /lib;
        touch /etc/{fs,m}tab
        echo "$(NAME) v$(VERSION) - $(SLOGAN)" >  /etc/issue
        echo "===============================" >> /etc/issue

diff --git a/lfs/strongswan b/lfs/strongswan
index dd1f0ac848b7a1bb09d279df8750d831849626c5..642d651823b694171fc16eafeb3add65263c6f6b 100644 (file)
--- a/lfs/strongswan
+++ b/lfs/strongswan
@@ -78,6 +78,7 @@ $(subst %,%_MD5,$(objects)) :
 $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
        @$(PREBUILD)
        @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
+       cd $(DIR_APP) && patch -Np1 -i $(DIR_SRC)/src/patches/strongswan-5.1.2-5.2.1_modp_custom.patch
        cd $(DIR_APP) && patch -Np1 -i $(DIR_SRC)/src/patches/strongswan-5.0.2_ipfire.patch
 
        cd $(DIR_APP) && [ -x "configure" ] || ./autogen.sh

diff --git a/lfs/swconfig b/lfs/swconfig
new file mode 100644 (file)
index 0000000..81e0b9f
--- /dev/null
+++ b/lfs/swconfig
@@ -0,0 +1,77 @@
+###############################################################################
+#                                                                             #
+# IPFire.org - A linux based firewall                                         #
+# Copyright (C) 2007-2015  IPFire Team  <info@ipfire.org>                     #
+#                                                                             #
+# This program is free software: you can redistribute it and/or modify        #
+# it under the terms of the GNU General Public License as published by        #
+# the Free Software Foundation, either version 3 of the License, or           #
+# (at your option) any later version.                                         #
+#                                                                             #
+# This program is distributed in the hope that it will be useful,             #
+# but WITHOUT ANY WARRANTY; without even the implied warranty of              #
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the               #
+# GNU General Public License for more details.                                #
+#                                                                             #
+# You should have received a copy of the GNU General Public License           #
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.       #
+#                                                                             #
+###############################################################################
+
+###############################################################################
+# Definitions
+###############################################################################
+
+include Config
+
+VER        = 001
+
+THISAPP    = swconfig-$(VER)
+DL_FILE    = $(THISAPP).tar.xz
+DL_FROM    = $(URL_IPFIRE)
+DIR_APP    = $(DIR_SRC)/$(THISAPP)
+TARGET     = $(DIR_INFO)/$(THISAPP)
+SUP_ARCH   = armv5tel
+
+###############################################################################
+# Top-level Rules
+###############################################################################
+
+objects = $(DL_FILE)
+
+$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
+
+$(DL_FILE)_MD5 = c35919a05fc82b3f8b311da8dfc2cd3e
+
+install : $(TARGET)
+
+check : $(patsubst %,$(DIR_CHK)/%,$(objects))
+
+download :$(patsubst %,$(DIR_DL)/%,$(objects))
+
+md5 : $(subst %,%_MD5,$(objects))
+
+###############################################################################
+# Downloading, checking, md5sum
+###############################################################################
+
+$(patsubst %,$(DIR_CHK)/%,$(objects)) :
+       @$(CHECK)
+
+$(patsubst %,$(DIR_DL)/%,$(objects)) :
+       @$(LOAD)
+
+$(subst %,%_MD5,$(objects)) :
+       @$(MD5)
+
+###############################################################################
+# Installation Details
+###############################################################################
+
+$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
+       @$(PREBUILD)
+       @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
+       cd $(DIR_APP) && make $(MAKETUNING)
+       cd $(DIR_APP) && install -v -m755 swconfig /usr/bin/
+       @rm -rf $(DIR_APP)
+       @$(POSTBUILD)

diff --git a/lfs/tmux b/lfs/tmux
index ec4cc20b7b4780ec5e4cc990469fadcbabb62535..ddd53847d2c6d5820af22cb1ff3e005d1f536139 100644 (file)
--- a/lfs/tmux
+++ b/lfs/tmux
@@ -32,9 +32,9 @@ DL_FROM    = $(URL_IPFIRE)
 DIR_APP    = $(DIR_SRC)/$(THISAPP)
 TARGET     = $(DIR_INFO)/$(THISAPP)
 PROG       = tmux
-PAK_VER    = 1
+PAK_VER    = 2
 
-DEPS       = ""
+DEPS       = "libevent2"
 
 ###############################################################################
 # Top-level Rules

diff --git a/lfs/u-boot b/lfs/u-boot
index eafb59262fc52095abc0193096997addc58b918f..28f65083cf9659a9c93eb2f0a34c52d4e20f3902 100644 (file)
--- a/lfs/u-boot
+++ b/lfs/u-boot
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 2013.10
+VER        = 2014.04
 
 THISAPP    = u-boot-$(VER)
 DL_FILE    = $(THISAPP).tar.bz2
@@ -41,7 +41,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_MD5 = a076a044b64371edc52f7e562b13f6b2
+$(DL_FILE)_MD5 = 6d2116d1385a66e9a59742caa9d62a54
 
 install : $(TARGET)
 
@@ -84,7 +84,6 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
        # Install pandaboard uboot as default
        cd $(DIR_APP) && install MLO /boot/
        cd $(DIR_APP) && install u-boot.img /boot/
-       cp -vf $(DIR_SRC)/config/u-boot/* /boot/
        cd $(DIR_APP) && make distclean
 
        # Wandboard Quad
@@ -111,9 +110,24 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
                /usr/share/u-boot/wandboard_solo
        cd $(DIR_APP) && make distclean
 
+       # LeMaker Banana Pi
+       -mkdir -pv /usr/share/u-boot/banana_pi
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/u-boot/sunxi/001-uboot-sunxi-509d96d4f1f602d62d36db660973249e16f9d088.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/u-boot/sunxi/002-uboot-jwrdegoede-psci-support.patch
+       cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/u-boot/sunxi/003-uboot-fix-gmac-not-working-reliable-on-bananapi.patch
+       cd $(DIR_APP) && make CROSS_COMPILE="" Bananapi_config
+       cd $(DIR_APP) && make CROSS_COMPILE="" HOSTCC="gcc $(CFLAGS)"
+       cd $(DIR_APP) && install -v -m 644 u-boot-sunxi-with-spl.bin \
+               /usr/share/u-boot/banana_pi
+
        # mkimage
        cd $(DIR_APP) && make CROSS_COMPILE="" HOSTCC="gcc $(CFLAGS)" tools
        cd $(DIR_APP) && install -v -m 755 tools/mkimage /usr/bin
 
+       # config (uEnv.txt)
+       cp -vf $(DIR_SRC)/config/u-boot/* /boot/
+       # patch real Kernel version to uEnv.txt
+       sed -e "s/xxxKVERxxx/$(KVER)/g" -i /boot/uEnv.txt
+
        @rm -rf $(DIR_APP)
        @$(POSTBUILD)

diff --git a/lfs/wireless-regdb b/lfs/wireless-regdb
index 7c1dbe8e6f7275d6840331f0165df717594c7797..17a645045bae6878e90b6e76f0b28e2134695b14 100644 (file)
--- a/lfs/wireless-regdb
+++ b/lfs/wireless-regdb
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 2013.02.13
+VER        = 2014.11.18
 
 THISAPP    = wireless-regdb-$(VER)
 DL_FILE    = $(THISAPP).tar.xz
@@ -41,7 +41,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_MD5 = 46a4aa49282ea6713c3cf28cc2fc600f
+$(DL_FILE)_MD5 = d750c402c5510add7380edcb1d9b75b2
 
 install : $(TARGET)
 

diff --git a/lfs/wpa_supplicant b/lfs/wpa_supplicant
index 5b1125c9206151e9a23f052e42c136c08426fc48..1cebaabb3a9b0ae14930ff10f4669b53a0027c1b 100644 (file)
--- a/lfs/wpa_supplicant
+++ b/lfs/wpa_supplicant
@@ -1,7 +1,7 @@
 ###############################################################################
 #                                                                             #
 # IPFire.org - A linux based firewall                                         #
-# Copyright (C) 2007-2014  IPFire Team  <info@ipfire.org>                     #
+# Copyright (C) 2007-2015  IPFire Team  <info@ipfire.org>                     #
 #                                                                             #
 # This program is free software: you can redistribute it and/or modify        #
 # it under the terms of the GNU General Public License as published by        #
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 2.2
+VER        = 2.3
 
 THISAPP    = wpa_supplicant-$(VER)
 DL_FILE    = $(THISAPP).tar.gz
@@ -41,7 +41,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_MD5 = 238e8e888bbd558e1a57e3eb28d1dd07
+$(DL_FILE)_MD5 = f2ed8fef72cf63d8d446a2d0a6da630a
 
 install : $(TARGET)
 

diff --git a/make.sh b/make.sh
index d4899f9a370353132b6a1d776a15d37c0ec5fced..9f77df59bebf7fe9846fbe56bfdfb2473e2b6006 100755 (executable)
--- a/make.sh
+++ b/make.sh
@@ -25,8 +25,8 @@
 NAME="IPFire"                                                  # Software name
 SNAME="ipfire"                                                 # Short name
 VERSION="2.17"                                                 # Version number
-CORE="86"                                                      # Core Level (Filename)
-PAKFIRE_CORE="85"                                              # Core Level (PAKFIRE)
+CORE="87-rc1"                                                  # Core Level (Filename)
+PAKFIRE_CORE="86"                                              # Core Level (PAKFIRE)
 GIT_BRANCH=`git rev-parse --abbrev-ref HEAD`                   # Git Branch
 SLOGAN="www.ipfire.org"                                                # Software slogan
 CONFIG_ROOT=/var/ipfire                                                # Configuration rootdir
@@ -411,6 +411,7 @@ buildipfire() {
        i586)
                # x86-pae (Native and new XEN) kernel build
                ipfiremake linux                        KCFG="-pae"
+               ipfiremake backports                    KCFG="-pae"
                ipfiremake cryptodev                    KCFG="-pae"
                ipfiremake e1000e                       KCFG="-pae"
                ipfiremake igb                          KCFG="-pae"
@@ -420,6 +421,7 @@ buildipfire() {
 
                # x86 kernel build
                ipfiremake linux                        KCFG=""
+               ipfiremake backports                    KCFG=""
                ipfiremake cryptodev                    KCFG=""
                ipfiremake e1000e                       KCFG=""
                ipfiremake igb                          KCFG=""
@@ -431,12 +433,14 @@ buildipfire() {
        armv5tel)
                # arm-rpi (Raspberry Pi) kernel build
                ipfiremake linux                        KCFG="-rpi"
+               ipfiremake backports                    KCFG="-rpi"
                ipfiremake cryptodev                    KCFG="-rpi"
                ipfiremake xtables-addons               KCFG="-rpi"
                ipfiremake linux-initrd                 KCFG="-rpi"
 
                # arm multi platform (Panda, Wandboard ...) kernel build
                ipfiremake linux                        KCFG="-multi"
+               ipfiremake backports                    KCFG="-multi"
                ipfiremake cryptodev                    KCFG="-multi"
                ipfiremake e1000e                       KCFG="-multi"
                ipfiremake igb                          KCFG="-multi"
@@ -446,6 +450,7 @@ buildipfire() {
 
                # arm-kirkwood (Dreamplug, ICY-Box ...) kernel build
                ipfiremake linux                        KCFG="-kirkwood"
+               ipfiremake backports                    KCFG="-kirkwood"
                ipfiremake cryptodev                    KCFG="-kirkwood"
                ipfiremake e1000e                       KCFG="-kirkwood"
                ipfiremake igb                          KCFG="-kirkwood"
@@ -811,6 +816,7 @@ buildipfire() {
   ipfiremake pigz
   ipfiremake tmux
   ipfiremake perl-Text-CSV_XS
+  ipfiremake swconfig
 }
 
 buildinstaller() {

diff --git a/src/initscripts/init.d/collectd b/src/initscripts/init.d/collectd
index 7de005eb41dd56e37be8e9491ce9474b9f9a7fc7..96bd12676cec3e0aed41344556a4249bdd720e91 100644 (file)
--- a/src/initscripts/init.d/collectd
+++ b/src/initscripts/init.d/collectd
@@ -84,11 +84,14 @@ case "$1" in
                fi
 
                # Enable swap plugin if swap found
-               if [ "$(swapon -s | wc -l)" == "1" ]; then
+               if [ "$(swapon -s | wc -l)" == "0" ]; then
                        sed -i -e "s|^LoadPlugin swap|#LoadPlugin swap|g" /etc/collectd.conf
                else
                        sed -i -e "s|^#LoadPlugin swap|LoadPlugin swap|g" /etc/collectd.conf
                fi
+               
+               # sync after config update...
+               sync
 
                if [ $(date +%Y) -gt 2011 ]; then
                        boot_mesg "Starting Collection daemon..."
@@ -107,6 +110,8 @@ case "$1" in
                if [ "$(basename $0)" == "collectd" ]; then
                    /etc/init.d/tmpfs backup
                fi
+               # sync after backup...
+               sync
                ;;
        restart)
                ${0} stop

diff --git a/src/initscripts/init.d/console b/src/initscripts/init.d/console
index 7381a69b3cccc3a4d058f72b9d3057d51de83484..8757b4d26af1a74c293f1abb7cddac4f5a4f0cb8 100644 (file)
--- a/src/initscripts/init.d/console
+++ b/src/initscripts/init.d/console
@@ -17,7 +17,7 @@
 . ${rc_functions}
 eval $(/usr/local/bin/readhash /var/ipfire/main/settings)
 
-FONT="LatArCyrHeb-16"
+FONT="latarcyrheb-sun16"
 KEYMAP_CORRECTIONS="euro2"
 UNICODE="1"
 BROKEN_COMPOSE="0"

diff --git a/src/initscripts/init.d/hostapd b/src/initscripts/init.d/hostapd
index 8f59a7f16fdb51c1fbe4c420eab4c89cba0d9a9b..1e7cec48097ee35f4cd1408ad5bb728d09c20fc0 100644 (file)
--- a/src/initscripts/init.d/hostapd
+++ b/src/initscripts/init.d/hostapd
@@ -106,8 +106,18 @@ case "${1}" in
                sleep 2
 
                if [ "$(/usr/sbin/iwconfig $INTERFACE | /bin/grep "Mode:Master")" == "" ]; then
-                       boot_mesg "Error! Can't set wlan master mode"
-                       echo_failure;
+                       killproc /usr/bin/hostapd > /dev/null 2>&1
+                       boot_mesg "Try to create additional AP device ..." 
+                       ip link set ${INTERFACE} down
+                       ip link set ${INTERFACE} name ${INTERFACE}_man
+                       iw dev  ${INTERFACE}_man interface add ${INTERFACE} type __ap
+                       evaluate_retval;
+                       if [ -d /sys/class/net/${INTERFACE} ]; then
+                               /usr/bin/hostapd -P /var/run/hostapd /etc/hostapd.conf >/dev/null 2>&1 &
+                       else
+                               ip link set ${INTERFACE}_man down
+                               ip link set ${INTERFACE}_man name ${INTERFACE}
+                       fi
                        exit 0;
                else
                        echo_ok
@@ -116,7 +126,9 @@ case "${1}" in
 
        stop)
                boot_mesg "Stopping hostapd..."
-
+               ip link set ${INTERFACE} down > /dev/null 2>&1
+               ip link set ${INTERFACE} down_man > /dev/null 2>&1
+               sleep 1
                killproc /usr/bin/hostapd
                evaluate_retval
                ;;

diff --git a/src/initscripts/init.d/leds b/src/initscripts/init.d/leds
index faa765055e95c21a8b5a81e0a4164e96f24a2c8f..9f7323f139b3578b04acddc0c100e925f786f1d6 100644 (file)
--- a/src/initscripts/init.d/leds
+++ b/src/initscripts/init.d/leds
@@ -94,6 +94,11 @@ case "${1}" in
                setup_netdev_trigger nas6210:red:power ${RED_DEV} tx rx
                setup_netdev_trigger nas6210:red:usb_copy ${GREEN_DEV} tx rx
 
+               # Mirabox start
+               setup_heartbeat_trigger mirabox:green:pwr
+               setup_netdev_trigger mirabox:green:stat ${GREEN_DEV} tx rx
+               setup_netdev_trigger mirabox:blue:stat ${BLUE_DEV} tx rx
+
                exit 0
        ;;
 
@@ -132,6 +137,12 @@ case "${1}" in
                disable_led_trigger nas6210:red:power
                disable_led_trigger nas6210:red:usb_copy
 
+               # Mirabox stop
+               disable_led_trigger mirabox:green:pwr
+               enable_led mirabox:green:pwr
+               disable_led_trigger mirabox:green:stat
+               disable_led_trigger mirabox:blue:stat
+
                exit 0
        ;;
 

diff --git a/src/initscripts/init.d/swconfig b/src/initscripts/init.d/swconfig
new file mode 100644 (file)
index 0000000..0ee4260
--- /dev/null
+++ b/src/initscripts/init.d/swconfig
@@ -0,0 +1,79 @@
+#!/bin/sh
+########################################################################
+# Begin $rc_base/init.d/swconfig
+#
+# Description : Script to setup lan switch.
+#               don't edit this script! If you want change the functions
+#               create an own script called swconfig.user
+########################################################################
+
+. /etc/sysconfig/rc
+. ${rc_functions}
+
+if [ -e /etc/init.d/swconfig.user ]; then
+       /etc/init.d/swconfig.user $*
+       exit ${?}
+fi
+
+if [ -e /var/ipfire/ethernet/swconfig_mac ]; then
+SWMAC=`cat /var/ipfire/ethernet/swconfig_mac`
+else
+# Generate a random local administrated mac address for vlan swconfig.
+SWMAC=`printf "%1x2:%02x:%02x:%02x:%02x" $[RANDOM%16] $[RANDOM%256] $[RANDOM%256] $[RANDOM%256] $[RANDOM%256]`
+echo $SWMAC > /var/ipfire/ethernet/swconfig_mac
+fi
+
+case "${1}" in
+       start)
+               case `cat /proc/device-tree/model 2>/dev/null` in
+                       "Lamobo-R1")
+                               #
+                               # Lamobo R1 aka BPi R1 Routerboard
+                               #
+                               # Speaker | LAN1 | LAN2 | LAN3 | LAN4 || LAN5 | HDMI
+                               # SW-Port |  P2  |  P1  |  P0  |  P4  ||  P3  |
+                               # VLAN    |  11  |  12  |  13  |  14  ||ALL(t)|
+                               #
+                               # Switch-Port P8 - ALL(t) boards internal CPU Port
+                               #
+                               device=`ls /sys/class/net/*/device/stmmac-0* | head -1 | cut -d/ -f5`
+                               ip link set $device up
+                               boot_mesg "Configure vlan-switch on $device ..."
+                               # Reset switch, counter and enable vlan mode
+                               swconfig dev $device set reset 1
+                               swconfig dev $device set reset_mib 1
+                               swconfig dev $device set enable_vlan 1
+                               # configure vlans
+                               swconfig dev $device vlan 11 set ports "2 3t 8t"
+                               swconfig dev $device vlan 12 set ports "1 3t 8t"
+                               swconfig dev $device vlan 13 set ports "0 3t 8t"
+                               swconfig dev $device vlan 14 set ports "4 3t 8t"
+                               # activate new config
+                               swconfig dev $device set apply 1
+                               # create interfaces for the vlan's
+                               modprobe 8021q
+                               vconfig add $device 11
+                               vconfig add $device 12
+                               vconfig add $device 13
+                               vconfig add $device 14
+                               # set local mac addresses.
+                               ip link set dev $device.11 address $SWMAC:11
+                               ip link set dev $device.12 address $SWMAC:12
+                               ip link set dev $device.13 address $SWMAC:13
+                               ip link set dev $device.14 address $SWMAC:14
+                               # need to restart udev...
+                               killall udevd
+                               /etc/init.d/udev start
+                       ;;
+               esac
+               exit 0
+       ;;
+
+       *)
+               echo "Usage: ${0} {start}"
+               exit 1
+       ;;
+esac
+
+# End $rc_base/init.d/swconfig
+

diff --git a/src/installer/dracut-module/run-installer.sh b/src/installer/dracut-module/run-installer.sh
index ea9669a86cfc40084426f5f9be552bcc86c4e37a..33c8c4b10b7fe54a5e9d7cc5532ad662cf72dbe2 100644 (file)
--- a/src/installer/dracut-module/run-installer.sh
+++ b/src/installer/dracut-module/run-installer.sh
@@ -12,7 +12,7 @@ fi
 echo -en '\033%G' && kbd_mode -u
 
 # Load default console font
-setfont LatArCyrHeb-16
+setfont latarcyrheb-sun16
 
 # Silence the kernel
 echo >/proc/sys/kernel/printk "1 4 1 7"

diff --git a/src/installer/main.c b/src/installer/main.c
index d02db2834afeccb60c891d88964640c6edf44000..358b2c46ffdf892a17a894ec7f6fbb6c2d367259 100644 (file)
--- a/src/installer/main.c
+++ b/src/installer/main.c
@@ -216,40 +216,55 @@ static char* get_system_release() {
 }
 
 static char* center_string(const char* str, int width) {
+       if (!str)
+               return NULL;
+
+       char* string = NULL;
        unsigned int str_len = strlen(str);
 
-       unsigned int indent_length = (width - str_len) / 2;
-       char indent[indent_length + 1];
+       if (str_len == width) {
+               string = strdup(str);
 
-       for (unsigned int i = 0; i < indent_length; i++) {
-               indent[i] = ' ';
-       }
-       indent[indent_length] = '\0';
+       } else if (str_len > width) {
+               string = strdup(str);
+               string[width - 1] = '\0';
 
-       char* string = NULL;
-       if (asprintf(&string, "%s%s", indent, str) < 0)
-               return NULL;
+       } else {
+               unsigned int indent_length = (width - str_len) / 2;
+               char indent[indent_length + 1];
+
+               for (unsigned int i = 0; i < indent_length; i++) {
+                       indent[i] = ' ';
+               }
+               indent[indent_length] = '\0';
+
+               if (asprintf(&string, "%s%s", indent, str) < 0)
+                       return NULL;
+       }
 
        return string;
 }
 
-#define DEFAULT_LANG "English"
-#define NUM_LANGS 10
+#define DEFAULT_LANG "en.utf8"
+#define NUM_LANGS 13
 
 static struct lang {
        const char* code;
        char* name;
 } languages[NUM_LANGS + 1] = {
-       { "da.utf8",    "Danish (Dansk)" },
-       { "nl_NL.utf8", "Dutch (Nederlands)" },
-       { "en_US.utf8", "English" },
-       { "fr_FR.utf8", "French (Français)" },
-       { "de_DE.utf8", "German (Deutsch)" },
-       { "pl_PL.utf8", "Polish (Polski)" },
-       { "pt_BR.utf8", "Portuguese (Brasil)" },
-       { "ru_RU.utf8", "Russian (Русский)" },
-       { "es_ES.utf8", "Spanish (Español)" },
-       { "tr_TR.utf8", "Turkish (Türkçe)" },
+       { "fa.utf8",    "فارسی (Persian)" },
+       { "da.utf8",    "Dansk (Danish)" },
+       { "es.utf8",    "Español (Spanish)" },
+       { "en.utf8",    "English" },
+       { "fr.utf8",    "Français (French)" },
+       { "hr.utf8",    "Hrvatski (Croatian)" },
+       { "it.utf8",    "Italiano (Italian)" },
+       { "de.utf8",    "Deutsch (German)" },
+       { "nl.utf8",    "Nederlands (Dutch)" },
+       { "pl.utf8",    "Polski (Polish)" },
+       { "pt.utf8",    "Portuguese (Brasil)" },
+       { "ru.utf8",    "Русский (Russian)" },
+       { "tr.utf8",    "Türkçe (Turkish)" },
        { NULL, NULL },
 };
 
@@ -261,6 +276,7 @@ static struct config {
        int disable_swap;
        char download_url[STRING_SIZE];
        char postinstall[STRING_SIZE];
+       char* language;
 } config = {
        .unattended = 0,
        .serial_console = 0,
@@ -269,6 +285,7 @@ static struct config {
        .disable_swap = 0,
        .download_url = DOWNLOAD_URL,
        .postinstall = "\0",
+       .language = DEFAULT_LANG,
 };
 
 static void parse_command_line(struct config* c) {
@@ -340,7 +357,6 @@ int main(int argc, char *argv[]) {
        int rc = 0;
        char commandstring[STRING_SIZE];
        int choice;
-       char language[STRING_SIZE];
        char message[STRING_SIZE];
        char title[STRING_SIZE];
        int allok = 0;
@@ -373,7 +389,8 @@ int main(int argc, char *argv[]) {
 
        // Draw title
        char* roottext = center_string(system_release, screen_cols);
-       newtDrawRootText(0, 0, roottext);
+       if (roottext)
+               newtDrawRootText(0, 0, roottext);
 
        snprintf(title, sizeof(title), "%s - %s", NAME, SLOGAN);
 
@@ -393,7 +410,7 @@ int main(int argc, char *argv[]) {
                char* langnames[NUM_LANGS + 1];
 
                for (unsigned int i = 0; i < NUM_LANGS; i++) {
-                       if (strcmp(languages[i].name, DEFAULT_LANG) == 0)
+                       if (strcmp(languages[i].code, DEFAULT_LANG) == 0)
                                choice = i;
 
                        langnames[i] = languages[i].name;
@@ -406,10 +423,10 @@ int main(int argc, char *argv[]) {
                assert(choice <= NUM_LANGS);
 
                fprintf(flog, "Selected language: %s (%s)\n", languages[choice].name, languages[choice].code);
-               snprintf(language, sizeof(language), "%s", languages[choice].code);
+               config.language = languages[choice].code;
 
-               setenv("LANGUAGE", language, 1);
-               setlocale(LC_ALL, language);
+               setlocale(LC_ALL, config.language);
+               setenv("LANGUAGE", config.language, 1);
        }
 
        // Set helpline
@@ -419,7 +436,8 @@ int main(int argc, char *argv[]) {
        else
                helpline = center_string(_("<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"), screen_cols);
 
-       newtPushHelpLine(helpline);
+       if (helpline)
+               newtPushHelpLine(helpline);
 
        if (!config.unattended) {
                snprintf(message, sizeof(message),
@@ -770,7 +788,7 @@ int main(int argc, char *argv[]) {
        }
 
        /* Save language und local settings */
-       write_lang_configs(language);
+       write_lang_configs(config.language);
 
        /* Build cache lang file */
        snprintf(commandstring, STRING_SIZE, "/usr/sbin/chroot /harddisk /usr/bin/perl -e \"require '" CONFIG_ROOT "/lang.pl'; &Lang::BuildCacheLang\"");

diff --git a/src/installer/po/LINGUAS b/src/installer/po/LINGUAS
index 1aa13069d9c174949cf1ceb56a5f199b7c42ba6d..6fbf14ca7e7fc989771535a0ca98ba1a48baa641 100644 (file)
--- a/src/installer/po/LINGUAS
+++ b/src/installer/po/LINGUAS
@@ -7,10 +7,13 @@ el_GR
 es
 fa
 fr
+hr
 hu
 id
 it
 ja
+ja_JP
+jv
 km_KH
 nl
 pl
@@ -18,8 +21,12 @@ pt_BR
 pt_PT
 ro_RO
 ru
+ru_RU
+rw
 sk
 sq
+sr
+su
 sv
 th
 tk

diff --git a/src/installer/po/ar.po b/src/installer/po/ar.po
index a10146e83c799b5979ddf2013f9dcc0fae2244ea..b138c966a504b97e9c6d95c541c6d55715326c4b 100644 (file)
--- a/src/installer/po/ar.po
+++ b/src/installer/po/ar.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Arabic (http://www.transifex.com/projects/p/ipfire/language/ar/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: ar\n"
 "Plural-Forms: nplurals=6; plural=n==0 ? 0 : n==1 ? 1 : n==2 ? 2 : n%100>=3 && n%100<=10 ? 3 : n%100>=11 && n%100<=99 ? 4 : 5;\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/ca.po b/src/installer/po/ca.po
index 54e3699e43e585aa40d85bc62c6606adb867418b..a7d97cfb1ac4fe85068d122bb30fef154d3fc27f 100644 (file)
--- a/src/installer/po/ca.po
+++ b/src/installer/po/ca.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Catalan (http://www.transifex.com/projects/p/ipfire/language/ca/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: ca\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/cs_CZ.po b/src/installer/po/cs_CZ.po
index 101c98dae764c77bb0abbe15a7ac3da219bfa382..4cfc7aa5c7af7dfacb431859f118d0354e150df8 100644 (file)
--- a/src/installer/po/cs_CZ.po
+++ b/src/installer/po/cs_CZ.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Czech (Czech Republic) (http://www.transifex.com/projects/p/ipfire/language/cs_CZ/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: cs_CZ\n"
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/da.po b/src/installer/po/da.po
index d15c9177a604a946ea2c8f6c74f9af75883451f0..75918db3cc30b77037e1524ca76b06b3b1dcc6e6 100644 (file)
--- a/src/installer/po/da.po
+++ b/src/installer/po/da.po
@@ -8,8 +8,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Danish (http://www.transifex.com/projects/p/ipfire/language/da/)\n"
 "MIME-Version: 1.0\n"
@@ -18,85 +18,145 @@ msgstr ""
 "Language: da\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr "OK"
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr "Annuller"
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr "Jeg accepterer brugerlicensen"
 
-#: main.c:312
-msgid "Language selection"
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
 msgstr ""
 
-#: main.c:312
+#: main.c:403
+msgid "Language selection"
+msgstr "Vælg sprog"
+
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
+msgstr "Vælg det sprog du ønsker at anvende under installationen."
+
+#: main.c:418
+msgid "Unattended mode"
 msgstr ""
 
-#: main.c:323
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr "<Tab>/<Alt-Tab> mellem elementer | <Space> vælger | <F12> næste skærm"
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
 "\n"
 "Selecting Cancel on any of the following screens will reboot the computer."
-msgstr ""
+msgstr "Velkommen til %s installationsprogram.\n\nVælg Annuller på ethvert tidspunkt for at genstarte computeren."
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr "Start installationen"
 
-#: main.c:339
-msgid "No local source media found. Starting download."
-msgstr "Fandt ikke en lokal kilde. Henter fra internettet."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
-msgstr "Henter installationsbillede ..."
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
 
-#: main.c:342
-msgid "Download error"
-msgstr "Fejl under hentning"
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
 
-#: main.c:376
-msgid "License Agreement"
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
+msgstr ""
+
+#: main.c:501
+msgid "Downloading installation image..."
+msgstr ""
+
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
+msgstr ""
+
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
 msgstr ""
 
-#: main.c:377
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
+msgid "License Agreement"
+msgstr "Licensaftale"
+
+#: main.c:544
 msgid "License not accepted!"
 msgstr "Brugerlicensen ikke accepteret!"
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr "Fandt ikke en harddisk."
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr "Vælg harddisk"
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr "Vælg den eller de harddisk(e) du vil installere IPFire på. Diskene bliver først partitioneret og dernæst bliver der oprettet filsystemer.\n\nAL DATA PÅ DISKENE BLIVER SLETTET."
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr "Ingen harddisk valgt.\n\nVælg venligst en eller flere harddiske du vil installere IPFire på."
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -106,15 +166,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr "Installationsprogrammet forbereder nu den eller de valgte harddiske:\n\n%s\n\nVil du fortsætte?"
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr "Harddisk opsætning"
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr "Slet alle data"
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -125,119 +185,146 @@ msgid ""
 "Do you agree to continue?"
 msgstr "Installationsprogrammet vil nu opsætte RAID konfigurationen på de valgte harddiske:\n\n%s\n%s\n\nVil du fortsætte?"
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr "RAID opsætning"
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
-msgstr "Din harddisk konfiguration understøttes ikke pt."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
+msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr "Din harddisk er for lille."
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
-msgstr ""
+msgstr "Din harddisk er meget lille, men du kan fortsætte uden en swap partition."
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr "ext4 filsystem"
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr "ext4 filsystem uden journal"
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr "XFS filsystem"
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr "ReiserFS filsystem"
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr "Vælg filsystem"
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr "Vælg venligst et filsystem:"
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr "Bygger RAID..."
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr "Kunne ikke bygge RAID."
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr "Partitionerer harddisk..."
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr "Kunne ikke partitionere harddisk."
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr "Opretter filsystemer..."
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr "Kunne ikke oprette filsystemer."
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr "Kunne ikke forbinde til filsystemer."
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr "Installerer systemet..."
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr "Kunne ikke installere systemet."
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr "Installerer sprog arkivet..."
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr "Kunne ikke installere sprog arkivet."
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr "Installerer bootloader..."
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
-msgstr ""
+msgstr "Kunne ikke gemme til /etc/default/grub."
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr "Kunne ikke installere bootloader."
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
 "\n"
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
-msgstr ""
+msgstr "%s blev installeret korrekt!\n\nFjern venligst installationsmedier fra systemet og vælg Genstart. Efter genstart bliver du bedt om at opsætte netværket og system kodeord. Efter opsætningen, besøg da https://%s:444 (eller hvad du navngav %s) fra din internet browser for at anvende web konsollen."
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr "Tillykke!"
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr "Genstart"
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
-msgstr ""
+msgstr "Installationen fejlede. Vælg Ok for at genstarte."

diff --git a/src/installer/po/de.po b/src/installer/po/de.po
index f4487a0567a86ecf17ac066dabd7b3fba49aefbb..93893d99b651db8f89d9efc18aa0091dd45129a4 100644 (file)
--- a/src/installer/po/de.po
+++ b/src/installer/po/de.po
@@ -4,14 +4,15 @@
 # 
 # Translators:
 # Michael Tremer <michael.tremer@ipfire.org>, 2014
+# Peter Cloudstone <rmg-mainz@web.de>, 2014
 # Stefan Schantl <stefan.schantl@ipfire.org>, 2014
 msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 16:04+0000\n"
-"Last-Translator: Stefan Schantl <stefan.schantl@ipfire.org>\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-07 15:02+0000\n"
+"Last-Translator: Peter Cloudstone <rmg-mainz@web.de>\n"
 "Language-Team: German (http://www.transifex.com/projects/p/ipfire/language/de/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -19,31 +20,40 @@ msgstr ""
 "Language: de\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr "OK"
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr "Abbrechen"
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr "Ich akzeptiere die Lizenz"
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr "Warnung: Automatische Installation startet in 10 Sekunden..."
+
+#: main.c:403
 msgid "Language selection"
 msgstr "Sprachauswahl"
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr "Wählen Sie die gewünschte Sprache für den Installationsprozess aus."
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr "Automatikmodus"
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr "<Tab>/<Alt-Tab> um zu wechseln | <Leertaste> wählt aus | <F12> nächster Bildschirm"
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -51,53 +61,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr "Willkommen zum %s Installationsprogramm.\n\nWenn Sie auf irgendeiner der folgenden Seiten 'Abbrechen' auswählen, wird der Computer neu gestartet."
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr "Installation beginnen"
 
-#: main.c:339
-msgid "No local source media found. Starting download."
-msgstr "Kein lokales Quellmedium gefunden. Starte Download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr "Der Installer versucht nun, das Installationsimage herunterzuladen."
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr "Kein Quelllaufwerk gefunden.\n\nBitte versuchen Sie, das erforderliche Installationsabbild herunterzuladen."
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr "Bitte stellen Sie sicher, dass der Computer mit einem Netzwerk verbunden ist, danach wird das Installationsprogramm versuchen, eine IP-Adresse zu erhalten."
+
+#: main.c:460
+msgid "Download installation image"
+msgstr "Installationsabbild wird heruntergeladen"
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr "Versuche, Netzwerk (DHCP) zu starten..."
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr "Das Netzwerk konnte nicht gestartet werden, es ist aber für das Fortfahren erforderlich.\n\nBitte verbinden Sie den Computer mit einem Netzwerk mit DHCP und versuchen Sie es erneut."
+
+#: main.c:487 main.c:516
+msgid "Retry"
+msgstr "Erneut versuchen"
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr "Lade Installationsimage herunter..."
 
-#: main.c:342
-msgid "Download error"
-msgstr "Fehler beim Download"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
+msgstr "MD5-Prüfsummen stimmen nicht überein"
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr "Das Installationsabbild konnte nicht heruntergeladen werden.\nGrund: %s\n\n%s"
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr "Konnte %s nicht auf %s mounten:\n%s\n"
+
+#: main.c:543
 msgid "License Agreement"
 msgstr "Lizenzvereinbarung"
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr "Lizenz nicht akzeptiert!"
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr "Es wurde keine Festplatte gefunden."
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr "Festplattenauswahl"
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr "Wählen Sie die Festplatte(n) auf denen IPFire installiert werden soll. Diese wird/werden zuerst partitioniert und danach mit einem Dateisystem ausgestattet.\n\nSÄMTLICHE DATEN AUF DER FESTPLATTE GEHEN VERLOREN."
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr "Keine Festplatte ausgewählt.\n\nBitte wählen Sie eine oder mehrere Festplatten auf denen IPFire installiert werden soll aus."
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -107,15 +168,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr "Das Installationsprogramm wird die folgende  Festplatte nun vorbereiten:\n\n%s\n\nMöchten Sie damit fortfahren?"
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr "Disk-Setup"
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr "Alle Daten löschen"
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -126,119 +187,146 @@ msgid ""
 "Do you agree to continue?"
 msgstr "Das Installationsprogramm wird nun einen RAID Verbund auf den folgenden Festplatten erstellen:\n\n%s\n%s\n\nMöchten Sie damit fortfahren?"
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr "RAID-Setup"
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr "Die gewählte Festplattenkonstellation wird momentan nicht unterstützt."
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr "Ihre Festplatte ist zu klein."
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr "Die gewählte Festplatte ist sehr klein, die Installation kann aber ohne Swap Partition fortgesetzt werden."
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr "ext4-Dateisystem"
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr "ext4-Dateisystem ohne Journal"
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr "XFS-Dateisystem"
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr "ReiserFS-Dateisystem"
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr "Dateisystemauswahl"
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr "Bitte wählen Sie ein Dateisystem:"
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr "Erstelle RAID..."
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr "Das RAID konnte nicht erstellt werden."
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr "Partitioniere die Festplatte..."
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr "Die Festplatte konnte nicht partitioniert werden."
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr "Erstelle Dateisysteme..."
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr "Die Dateisysteme konnten nicht erstellt werden."
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr "Die Dateisysteme konnten nicht eingehangen werden."
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr "Installiere das System..."
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr "Das System konnte nicht installiert werden."
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr "Installiere den Sprachdateicache..."
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr "Der Sprachdateicache konnte nicht erstellt werden."
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr "Installiere den Bootloader..."
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr "/etc/default/grub konnte nicht geschrieben werden."
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr "Der Bootloader konnte nicht installiert werden."
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr "Eine Sicherungskopie wurde auf dem Installationsmedium gefunden.\n\nMöchten Sie die Sicherungskopie wiederherstellen?"
+
+#: main.c:827
+msgid "Yes"
+msgstr "Ja"
+
+#: main.c:827
+msgid "No"
+msgstr "Nein"
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr "Bei der Wiederherstellung der Sicherungskopie trat ein Fehler auf."
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr "Führe Post-Installations-Skripte aus..."
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr "Post-Installations-Skript fehlgeschlagen."
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
 "\n"
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
-msgstr "%s wurde erfolgreich installiert.\n\nEntfernen Sie bitte alle Installionsmedian aus dem Computer und drücken Sie den \"Neustarten\" Knopf . \n\nNach dem erfolgten Neustart wird das Setup-Programm gestartet, in dem Sie Netzwerkkarten und die Systempasswörter konfigurieren können. Sobald dies fertiggestellt ist, können Sie in Ihrem Webbrowser die Weboberfläche mit https://%s:444 (oder welchen Namen Sie Ihrem %s auch immer gegeben haben) erreichen."
+msgstr "%s wurde erfolgreich installiert.\n\nEntfernen Sie bitte alle Installionsmedien aus dem Computer und drücken Sie \"Neustarten\". \n\nNach dem erfolgten Neustart wird das Setup-Programm gestartet, in dem Sie Netzwerkkarten und die Systempasswörter konfigurieren können. Sobald dies fertiggestellt ist, können Sie in Ihrem Webbrowser die Weboberfläche über https://%s:444 (oder welchen Namen Sie Ihrem %s auch immer gegeben haben) erreichen."
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr "Herzlichen Glückwunsch!"
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr "Neustarten"
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr "Installation fehlgeschlagen. Drücken Sie \"OK\" für einen Neustart des Systems."

diff --git a/src/installer/po/el_GR.po b/src/installer/po/el_GR.po
index d27fe7beb83397ef66f3eef2808a3f3d07afcc11..cf5ec2b4c7268237022033906a2dc05ec634aece 100644 (file)
--- a/src/installer/po/el_GR.po
+++ b/src/installer/po/el_GR.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Greek (Greece) (http://www.transifex.com/projects/p/ipfire/language/el_GR/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: el_GR\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/es.po b/src/installer/po/es.po
index d4812afd97caed547b8a436e0b08d2838d2d6679..725ebef32c17472a9c70ed236d3a518bd32e0e75 100644 (file)
--- a/src/installer/po/es.po
+++ b/src/installer/po/es.po
@@ -3,13 +3,15 @@
 # This file is distributed under the same license as the PACKAGE package.
 # 
 # Translators:
+# Roberto Peña <roberto.pena@northsecure.es>, 2015
+# Roberto Peña <roberto.pena@northsecure.es>, 2015
 msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
-"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2015-02-01 09:23+0000\n"
+"Last-Translator: Roberto Peña <roberto.pena@northsecure.es>\n"
 "Language-Team: Spanish (http://www.transifex.com/projects/p/ipfire/language/es/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -17,85 +19,145 @@ msgstr ""
 "Language: es\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
-msgstr ""
+msgstr "Ok"
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
-msgstr ""
+msgstr "Cancelar"
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
-msgstr ""
+msgstr "Acepto esta licencia"
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr "Advertencia: La instalación desatendida comenzará en 10 segundos..."
+
+#: main.c:403
 msgid "Language selection"
-msgstr ""
+msgstr "Selección de idioma"
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
-msgstr ""
+msgstr "Seleccione el idioma que quiere que se use durante la instalación."
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr "Modo desatendido"
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
-msgstr ""
+msgstr "<Tab>/<Alt-Tab> entre elementos | <Space> seleccionar  | <F12> siguiente pantalla"
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
 "\n"
 "Selecting Cancel on any of the following screens will reboot the computer."
-msgstr ""
+msgstr "Bienvenido al programa de instalación %s.\n\nAl seleccionar Cancelar en cualquiera de las siguientes pantallas se reiniciará el equipo."
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
-msgstr ""
+msgstr "Comenzar la instalación"
 
-#: main.c:339
-msgid "No local source media found. Starting download."
-msgstr ""
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr "El instalador no ha podido descargar la imagen de instalación."
 
-#: main.c:340
-msgid "Downloading installation image ..."
-msgstr ""
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr "No se puede encontrar unidad de origen.\n\nPuede intentar descargar la imagen de instalación requerida."
 
-#: main.c:342
-msgid "Download error"
-msgstr ""
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr "Por favor, asegúrese de conectar el equipo a una red y el instalador intentará conectarse adquiriendo una dirección IP."
+
+#: main.c:460
+msgid "Download installation image"
+msgstr "Descargando la imagen de instalación"
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr "Intentando iniciar la red (DHCP)..."
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr "La red no se pudo iniciar, pero es necesaria para continuar con la instalación.\n\nPor favor, conecte el equipo a una red con un servidor DHCP y vuelva a intentarlo."
+
+#: main.c:487 main.c:516
+msgid "Retry"
+msgstr "Reintentar"
+
+#: main.c:501
+msgid "Downloading installation image..."
+msgstr "Descargando la imagen de instalación..."
+
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
+msgstr "Discordancia suma de verificación MD5 "
+
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr "La imagen de instalación no puede ser descargada.\nRazón: %s\n\n%s"
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr "No se pudo montar %s to %s:\n%s\n"
 
-#: main.c:376
+#: main.c:543
 msgid "License Agreement"
-msgstr ""
+msgstr "Contrato de licencia"
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
-msgstr ""
+msgstr "Licencia no aceptada!"
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
-msgstr ""
+msgstr "Disco duro no encontrado."
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
-msgstr ""
+msgstr "Selección de disco"
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
-msgstr ""
+msgstr "Seleccione el disco(s) donde quiere instalar IPFire. Primero deberán ser particionados y cuando tengan particiones, se les pondrá un sistema de archivos.\n\nTODOS LOS DATOS DEL DISCO SERÁN DESTRUIDOS."
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
-msgstr ""
+msgstr "No se ha seleccionado un disco.\n\nPor favor, seleccione uno o más discos donde quiere que se instale IPFire."
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -103,17 +165,17 @@ msgid ""
 "  %s\n"
 "\n"
 "Do you agree to continue?"
-msgstr ""
+msgstr "El programa de instalación preparará ahora los discos elegidos:\n\n%s\n\nQuiere continuar?"
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
-msgstr ""
+msgstr "Disco de instalación"
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
-msgstr ""
+msgstr "Borrar todos los datos"
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -122,121 +184,148 @@ msgid ""
 "  %s\n"
 "\n"
 "Do you agree to continue?"
-msgstr ""
+msgstr "El programa de instalación establecerá ahora una configuración RAID en los discos duros seleccionados:\n\n%s\n%s\n\nEstá de acuerdo con continuar?"
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
-msgstr ""
+msgstr "Configuración RAID"
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
-msgstr ""
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
+msgstr "Su configuración del disco no es compatible actualmente."
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
-msgstr ""
+msgstr "Su disco duro es demasiado pequeño."
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
-msgstr ""
+msgstr "Su disco duro es muy pequeño, pero se puede continuar sin una partición de intercambio."
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
-msgstr ""
+msgstr "Sistema de archivos ext4"
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
-msgstr ""
+msgstr "Sistema de archivos ext4 sin diario"
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
-msgstr ""
+msgstr "Sistema de archivos XFS"
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
-msgstr ""
+msgstr "Sistema de archivos ReiserFS"
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
-msgstr ""
+msgstr "Selección del sistema de archivos"
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
-msgstr ""
+msgstr "Por favor, seleccione su sistema de archivos:"
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
-msgstr ""
+msgstr "Construyendo RAID."
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
-msgstr ""
+msgstr "No se ha podido construir el RAID."
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
-msgstr ""
+msgstr "Particionando disco..."
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
-msgstr ""
+msgstr "No se ha podido particionar el disco."
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
-msgstr ""
+msgstr "Creando el sistema de archivos..."
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
-msgstr ""
+msgstr "No se ha podido crear el sistema de archivos."
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
-msgstr ""
+msgstr "No se ha podido montar el sistema de archivos."
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
-msgstr ""
+msgstr "Instalando el sistema..."
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
-msgstr ""
+msgstr "No se ha podido instalar el sistema."
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
-msgstr ""
+msgstr "Instalando la caché del idioma..."
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
-msgstr ""
+msgstr "No se ha podido instalar la caché del idioma."
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
-msgstr ""
+msgstr "Instalando el bootloader..."
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
-msgstr ""
+msgstr "No se ha podido abrir /etc/default/grub para escritura."
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
-msgstr ""
+msgstr "No se ha podido instalar el bootloader."
+
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr "La imagen de instalación ha encontrado una copia de seguridad.\n\n¿Quiere restaurar la copia de seguridad?"
 
-#: main.c:666
+#: main.c:827
+msgid "Yes"
+msgstr "Sí"
+
+#: main.c:827
+msgid "No"
+msgstr "No"
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr "Se produjo un error cuando se restauró el archivo de copia de seguridad."
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr "Ejecutando post-script de instalación..."
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr "Ha fallado el Post-script de instalación."
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
 "\n"
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
-msgstr ""
+msgstr "%s fue instalado con éxito!\n\nPor favor, quite cualquier medio de instalación de este sistema y pulse el botón de reinicio. Una vez reiniciado el sistema, se le pedirá configurar la red y el sistema de contraseñas. Después de eso, para acceder a la consola de configuración, deberá introducir en su navegador web https://%s:444 (o cual sea el nombre de su %s)."
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
-msgstr ""
+msgstr "¡Enhorabuena!"
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
-msgstr ""
+msgstr "Reiniciar"
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
-msgstr ""
+msgstr "La instalación ha fallado. Pulse Aceptar para reiniciar."

diff --git a/src/installer/po/fa.po b/src/installer/po/fa.po
index 81d36316fad05326e181a480b71ae3b2d9be9f49..231adf4651cc7d23970f8aa8dddcddcd2c3360ca 100644 (file)
--- a/src/installer/po/fa.po
+++ b/src/installer/po/fa.po
@@ -3,14 +3,14 @@
 # This file is distributed under the same license as the PACKAGE package.
 # 
 # Translators:
-# Khalil Delavaran <khalil.delavaran@gmail.com>, 2014
+# Khalil Delavaran <khalil.delavaran@gmail.com>, 2014-2015
 msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
-"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2015-01-26 07:48+0000\n"
+"Last-Translator: Khalil Delavaran <khalil.delavaran@gmail.com>\n"
 "Language-Team: Persian (http://www.transifex.com/projects/p/ipfire/language/fa/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -18,85 +18,145 @@ msgstr ""
 "Language: fa\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr "بله"
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr "نمی خواهم"
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr "من این پروانه را می پذیرم."
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr "گوشزد: برپاسازی خودکار تا 10 ثانیه دیگر شروع می شود..."
+
+#: main.c:403
 msgid "Language selection"
-msgstr ""
+msgstr "گزینش زبان"
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
-msgstr ""
+msgstr "گزینش زبان شما برای بکارگیری در برپاسازی."
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr "حالت خودکار"
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr "<Tab>/<Alt-Tab> میان عنصری  | <Space> گزینش | <F12>  برای برگه پسین"
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
 "\n"
 "Selecting Cancel on any of the following screens will reboot the computer."
-msgstr ""
+msgstr "به برنامه برپا سازی %s خوش آمدید.\n\nبرای راه اندازی دوباره کامپیوتر، نمی خواهم را در هر صفحه ای می توانید گزینش کنید."
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr "آغاز برپا سازی"
 
-#: main.c:339
-msgid "No local source media found. Starting download."
-msgstr "هیچ رسانه محلی یافت نشد. دانلود آغاز شد."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr "درایو منبع پیدا نشد.\n\nشما می توانید ایمیج مورد نیاز نصب را دانلود کنید. "
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr "دانلود ایمیج برپاسازی"
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr "تلاش برای شروع شبکه (DHCP)..."
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr "شبکه نمی تواند شروع کند، و رفتن به نصب ضروری می باشد.\n\nخواهشمند است سیستم را به یک شبکه با DHCP سرور وصل کرده و دوباره تلاش کنید."
+
+#: main.c:487 main.c:516
+msgid "Retry"
+msgstr "دوباره"
+
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr "در حال دانلود ایمیج برای برپا سازی..."
 
-#: main.c:342
-msgid "Download error"
-msgstr "ایراد در دانلود"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
+msgstr "ناهماهنگی در کنرل جمعی MD5"
+
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr "ایمیج برپاسازی را نمی توان دانلود کرد.\nزیرا: %s\n\n%s"
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr "نمی توان %s را به %s مونت کرد:\n%s\n"
 
-#: main.c:376
+#: main.c:543
 msgid "License Agreement"
-msgstr ""
+msgstr "موافقنامه"
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr "پروانه پذیرفته نشد!"
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr "هارد دیسک یافت نشد."
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr "گزینش دیسک"
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr "دیسک (های) را برای برپاسازی IPFire گزینش کنید. نخست آنها را پارنیشین بندی کرده، و سپس، سیستم فایلی برای پارتیشن ها برگزینید.\n\nهمه داده های دیسک پاک می شوند."
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr "هیچ دیسکی گزینش نشده است.\n\nخواهشمند است یک دیسک یا بیشتر را برای برپا سازی IPFire گزینش کنید."
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -106,15 +166,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr "آماده سازی دیسک سخت برای برپا سازی برنامه :\n\n%s\n\nآیا شما گرایش به ادامه دارید؟"
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr "پیکربندی دیسک"
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr "پاک کردن همه داده ها"
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -125,119 +185,146 @@ msgid ""
 "Do you agree to continue?"
 msgstr "پیکربندی RAID بر روی هارد دیسکهای گزینش شده برای برپا سازی برنامه\n\n%s\n%s\n\nآیا شما گرایش به ادامه دارید؟"
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr "پیکربندی RAID"
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr "پیکربندی دیسک شما پشتیبانی نمی شود."
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr "هارد دیسک شما بسیار کوچک است."
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
-msgstr ""
+msgstr "هارد دیسک شما بسیار کوچک است، ولی می توانید بدون ساخت swap پارتیشن ادامه دهید."
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr "فایل سیستم ext4"
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr "سیستم فایل ext4 بدون روزنامه"
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr "فایل سیستم XFS"
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr "فایل سیستم RaiserFS"
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr "گزینش فایل سیستم"
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr "خواهشمند است فایل سیستم خود را گزینش کنید:"
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr "ساخت RAID..."
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr "ناتوانی در ساخت RAID."
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr "پارتیشن بندی دیسک..."
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr "ناتوانی در پارتیشین بندی دیسک."
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr "ساخت سیستم فایل..."
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr "ناتوانی در ساخت سیستم فایل."
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr "ناتوانی در مونت کردن سیستم فایل."
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr "برپا سازی سیستم..."
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr "ناتوانی در برپاسازی سیستم."
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr "در حال برپا سازی کش زبان..."
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr "ناتوانی در برپا سازی کش زبان."
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr "برپا سازی بوت لودر..."
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
-msgstr ""
+msgstr "نمی توان /etc/default/grub را برای ویرایش باز کرد."
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr "ناتوانی در برپا سازی بوت لودر."
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr "یک فایل بک آپ در ایمیج نصب پیدا شد.\n\nآیا می خواهید بک آپ را بازیابی کنید؟"
+
+#: main.c:827
+msgid "Yes"
+msgstr "بله"
+
+#: main.c:827
+msgid "No"
+msgstr "خیر"
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr "در هنگامه بازیابی فایل بک آپ شکستی رخ داده است."
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr "اجرای اسکریپت پس از نصب ..."
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr "اسکریپت پس از نصب شکست خورد."
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
 "\n"
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
-msgstr ""
+msgstr "%s برپا سازی شده است!\n\nخواهشمند است هر برپاسازی میانه ای از سیستم را پاک کنید و دکمه ریبوت را بزنید. پس از یک بار ریستارت سیستم، شما به پرسش های پیکربندی شبکه و گذر واژه سیستم پاسخ دهید. سپس برای پیکربندی پیشخوان وب، باید در مرورگر خود آدرس https://%s:444 (یا هر نامیکه گزینشی شما %s )را بنویسید."
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr "شادباش می گوییم!"
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr "ریبوت"
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
-msgstr ""
+msgstr "برپا سازی شکست خورد. برای راه اندازی دوباره بلی را فشار دهید."

diff --git a/src/installer/po/fr.po b/src/installer/po/fr.po
index a4af363010c3ef3f5efd0492c5d906e054332dd0..93ba21031fa332df214a1087abdf373520d6caeb 100644 (file)
--- a/src/installer/po/fr.po
+++ b/src/installer/po/fr.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: French (http://www.transifex.com/projects/p/ipfire/language/fr/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: fr\n"
 "Plural-Forms: nplurals=2; plural=(n > 1);\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/hr.po b/src/installer/po/hr.po
new file mode 100644 (file)
index 0000000..3638f10
--- /dev/null
+++ b/src/installer/po/hr.po
@@ -0,0 +1,329 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR The IPFire Project (www.ipfire.org)
+# This file is distributed under the same license as the PACKAGE package.
+# 
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: IPFire Project\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2015-01-26 12:07+0000\n"
+"Last-Translator: Blago Culjak <blago.culjak@hotmail.com>\n"
+"Language-Team: Croatian (http://www.transifex.com/projects/p/ipfire/language/hr/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: hr\n"
+"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
+
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
+msgid "OK"
+msgstr "OK"
+
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
+msgid "Cancel"
+msgstr "Otkazati"
+
+#: main.c:176
+msgid "I accept this license"
+msgstr "Prihvaćam ovu licencu"
+
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr "Upozoranje: Nenadgledana instalacija će započeti za 10 sekundi..."
+
+#: main.c:403
+msgid "Language selection"
+msgstr "Odabir jezika"
+
+#: main.c:403
+msgid "Select the language you wish to use for the installation."
+msgstr "Odaberite jezik koji želite koristiti za instalaciju."
+
+#: main.c:418
+msgid "Unattended mode"
+msgstr "Nenadgledana instalacija"
+
+#: main.c:420
+msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
+msgstr "<Tab>/<Alt-Tab> Između odabira | <Space> Izaberi | <F12> Idući ekran"
+
+#: main.c:426
+#, c-format
+msgid ""
+"Welcome to the %s installation program.\n"
+"\n"
+"Selecting Cancel on any of the following screens will reboot the computer."
+msgstr "Dobrodošli u %s instalacijski programa..\n\nOdabirom Otkazati na bilo kojem od sljedećih ekranima će se ponovno pokrenuti računalo."
+
+#: main.c:428
+msgid "Start installation"
+msgstr "Pokrenite instalaciju"
+
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr "Instalacija će pokušati preuzeti instalacijsku sliku."
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr "Izvorišni pogon nije pronađen.\n\nMožete pokušati preuzeti instalacijsku sliku."
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr "Provjerite da li ste priključeni na mrežu, instalacija će pokušati dobiti IP adresu."
+
+#: main.c:460
+msgid "Download installation image"
+msgstr "Preuzimanje instalacijske slike"
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr "Pokušaj starta mreže (DHCP)..."
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr "Mreža nije mogla biti pokrenuta a obvezna je za nastavak instalacije. \n\nPriključite se na mrežu s omogućenim DHCPom i pokušajte ponovno."
+
+#: main.c:487 main.c:516
+msgid "Retry"
+msgstr "Ponovno"
+
+#: main.c:501
+msgid "Downloading installation image..."
+msgstr "Preuzimanje instalacijske slike"
+
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
+msgstr "MD5 checksum se ne podudara"
+
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr "Instalacijska slika nije preuzeta.\n  Razlog: %s\n\n%s"
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr "Nemogu monitari %s na %s:\n  %s\n"
+
+#: main.c:543
+msgid "License Agreement"
+msgstr "Ugovor o licenci"
+
+#: main.c:544
+msgid "License not accepted!"
+msgstr "Licenca nije prihvaćena!"
+
+#: main.c:566
+msgid "No hard disk found."
+msgstr "Tvrdi disk nije pronađen."
+
+#: main.c:587
+msgid "Disk Selection"
+msgstr "Izbor diska"
+
+#: main.c:588
+msgid ""
+"Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
+"\n"
+"ALL DATA ON THE DISK WILL BE DESTROYED."
+msgstr "Odaberite disk(ove) na koje želite instalirati IPFire. Prvo će biti podijeljeni, a zatim particije će se datotečni sustav staviti na njih.\n\nSVI PODACI NA DISKU ĆE BITI UNIŠTENI!"
+
+#: main.c:599
+msgid ""
+"No disk has been selected.\n"
+"\n"
+"Please select one or more disks you want to install IPFire on."
+msgstr "Disk nije izabran. \n\nOdaberite jedan ili više diskova na koje želite instalirati na IPFire."
+
+#: main.c:617
+#, c-format
+msgid ""
+"The installation program will now prepare the chosen harddisk:\n"
+"\n"
+"  %s\n"
+"\n"
+"Do you agree to continue?"
+msgstr "Instalacijski program će sada pripremiti odabrani tvrdi disk:\n\n  %s\n\nSlažete li da nastavimo?"
+
+#: main.c:619
+msgid "Disk Setup"
+msgstr "Postavke diska"
+
+#: main.c:620 main.c:630
+msgid "Delete all data"
+msgstr "Izbriši sve podatke"
+
+#: main.c:627
+#, c-format
+msgid ""
+"The installation program will now set up a RAID configuration on the selected harddisks:\n"
+"\n"
+"  %s\n"
+"  %s\n"
+"\n"
+"Do you agree to continue?"
+msgstr "Instalacijski program će se sada postaviti RAID konfiguraciju na odabranim tvrdim diskovima:\n\n  %s\n  %s\n\nSlažete li da nastavimo?"
+
+#: main.c:629
+msgid "RAID Setup"
+msgstr "Postavljanje RAIDa"
+
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
+msgstr "Vaša diskovna konfiguracija nije podržana."
+
+#: main.c:655
+msgid "Your harddisk is too small."
+msgstr "Vaš tvrdi disk je premali."
+
+#: main.c:671
+msgid ""
+"Your harddisk is very small, but you can continue without a swap partition."
+msgstr "Vaš tvrdi disk je dosta mali, ali možete nastaviti bez swap particije."
+
+#: main.c:684
+msgid "ext4 Filesystem"
+msgstr "ext4 datotečni sustav"
+
+#: main.c:685
+msgid "ext4 Filesystem without journal"
+msgstr "ext4 datotečni sustav bez journal-a"
+
+#: main.c:686
+msgid "XFS Filesystem"
+msgstr "XFS datotečni sustav"
+
+#: main.c:687
+msgid "ReiserFS Filesystem"
+msgstr "ReiserFS datotečni sustav"
+
+#: main.c:701
+msgid "Filesystem Selection"
+msgstr "Izabir datotečnog sustava"
+
+#: main.c:701
+msgid "Please choose your filesystem:"
+msgstr "Molimo odaberite svoj datotečni sustav:"
+
+#: main.c:712
+msgid "Building RAID..."
+msgstr "Izgradnja RAIDa..."
+
+#: main.c:716
+msgid "Unable to build the RAID."
+msgstr "Nije moguće izgraditi RAID."
+
+#: main.c:728
+msgid "Partitioning disk..."
+msgstr "Particioniranje diska ..."
+
+#: main.c:732
+msgid "Unable to partition the disk."
+msgstr "Nije moguće particionirati disk."
+
+#: main.c:739
+msgid "Creating filesystems..."
+msgstr "Izrada datotečnog sustava ..."
+
+#: main.c:743
+msgid "Unable to create filesystems."
+msgstr "Nije moguće stvoriti datotečni sustav."
+
+#: main.c:749
+msgid "Unable to mount filesystems."
+msgstr "Nije moguće montirati datotečni sustav."
+
+#: main.c:760
+msgid "Installing the system..."
+msgstr "Instaliranje sustava..."
+
+#: main.c:761
+msgid "Unable to install the system."
+msgstr "Nije moguće instalirati sustav."
+
+#: main.c:777
+msgid "Installing the language cache..."
+msgstr "Instaliranje cache-a jezika..."
+
+#: main.c:778
+msgid "Unable to install the language cache."
+msgstr "Nije moguće instalirati cache jezika."
+
+#: main.c:783
+msgid "Installing the bootloader..."
+msgstr "Instaliranje bootloadera..."
+
+#: main.c:790
+msgid "Unable to open /etc/default/grub for writing."
+msgstr "Ne mogu otvoriti /etc/default/grub grub za pisanje."
+
+#: main.c:812
+msgid "Unable to install the bootloader."
+msgstr "Nije moguće instalirati bootloader."
+
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr "Pričuvna kopija je pronađena na instalacijskoj slici.\n\nDa li želite povratiti kopiju?"
+
+#: main.c:827
+msgid "Yes"
+msgstr "Da"
+
+#: main.c:827
+msgid "No"
+msgstr "Ne"
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr "Greška pri povratu pričuvne kopije."
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr "Izvodim post-instalacijske skripte."
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr "Post-instalacijske skripte nisu uspješno izvršene."
+
+#: main.c:877
+#, c-format
+msgid ""
+"%s was successfully installed!\n"
+"\n"
+"Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
+msgstr "%s uspješno je instaliran!\n\nMolimo uklonite sve instalacijske medije iz tog sustava i pritisnite gumb ponovno podizanje sustava. Nakon što je sustav ponovno podigne, od vas će biti zatraženo postavljanje mreže i lozinke sustava. Nakon toga, trebali usmjerite svoj web preglednik nahttps://%s:444  (ili koje god ste nazvali vaš %s) za postavke preko weba."
+
+#: main.c:882
+msgid "Congratulations!"
+msgstr "Čestitamo!"
+
+#: main.c:882
+msgid "Reboot"
+msgstr "Ponovno pokretanje"
+
+#: main.c:893
+msgid "Setup has failed. Press Ok to reboot."
+msgstr "Postavljanje nije uspjelo. Pritisnite OK za ponovno podizanje sustava."

diff --git a/src/installer/po/hu.po b/src/installer/po/hu.po
index ac250098b38297c49aeb5ad489b178036dc7a0a9..7e9e1988c01bfe51fad164a831a2f0155d877d9e 100644 (file)
--- a/src/installer/po/hu.po
+++ b/src/installer/po/hu.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Hungarian (http://www.transifex.com/projects/p/ipfire/language/hu/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: hu\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/id.po b/src/installer/po/id.po
index 28d9ae3f04db971d37df54067d0fc62cc595bfab..e4cc4c18e499a9274a9397185b142b69feda52cd 100644 (file)
--- a/src/installer/po/id.po
+++ b/src/installer/po/id.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Indonesian (http://www.transifex.com/projects/p/ipfire/language/id/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: id\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/it.po b/src/installer/po/it.po
index 70d009866d6642ad4891d1e8d00339f33cbd3c57..d938f37e1329b9b631169b4350618ebfbad59a40 100644 (file)
--- a/src/installer/po/it.po
+++ b/src/installer/po/it.po
@@ -3,13 +3,15 @@
 # This file is distributed under the same license as the PACKAGE package.
 # 
 # Translators:
+# Gabriele, 2014
+# luX <lucianocataldo@gmail.com>, 2014
 msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
-"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-12-06 18:41+0000\n"
+"Last-Translator: Gabriele\n"
 "Language-Team: Italian (http://www.transifex.com/projects/p/ipfire/language/it/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -17,85 +19,145 @@ msgstr ""
 "Language: it\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
-msgstr ""
+msgstr "OK"
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
-msgstr ""
+msgstr "Annulla"
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
-msgstr ""
+msgstr "Accetto questa licenza"
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr "Attenzione: L'installazione automatica inizierà tra 10 secondi..."
+
+#: main.c:403
 msgid "Language selection"
-msgstr ""
+msgstr "Scelta della lingua"
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
-msgstr ""
+msgstr "Selezionare la lingua che si desidera utilizzare per l'installazione."
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr "Modalità automatico"
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
-msgstr ""
+msgstr "<Tab>/<Alt-Tab> tra elementi | <Space> seleziona | <F12> schermata successiva"
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
 "\n"
 "Selecting Cancel on any of the following screens will reboot the computer."
-msgstr ""
+msgstr "Benvenuti nel programma di installazione %s.\n\nSelezionando Annulla su una delle seguenti schermate si riavvia il computer."
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
-msgstr ""
+msgstr "Avvio installazione"
 
-#: main.c:339
-msgid "No local source media found. Starting download."
-msgstr ""
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr "Il programma di installazione proverà ora a scaricare l'immagine di installazione."
 
-#: main.c:340
-msgid "Downloading installation image ..."
-msgstr ""
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr "Nessuna unità di origine trovata.\n\nPuoi provare a scaricare l'immagine d'installazione richiesta."
 
-#: main.c:342
-msgid "Download error"
-msgstr ""
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr "Per piacere assicurati di collegare il tuo computer ad una rete e il programma d'installazione proverà ad acquisire un indirizzo IP."
+
+#: main.c:460
+msgid "Download installation image"
+msgstr "Scaricamento immagine d'installazione"
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr "Provo ad avviare la rete (DHCP)..."
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr "Non è stato possibile avviare la rete, ma è richiesto per continuare l'installazione.\n\nPer piacere collega il tuo computer ad una rete con un server DHCP e riprova."
+
+#: main.c:487 main.c:516
+msgid "Retry"
+msgstr "Riprova"
+
+#: main.c:501
+msgid "Downloading installation image..."
+msgstr "Scaricamento immagine di installazione..."
+
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
+msgstr "Checksum MD5 non corrispondente"
+
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr "Non è stato possibile scaricare l'immagine di installazione.\nMotivo: %s\n\n%s"
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr "Impossibile montare %s su %s:\n  %s\n"
 
-#: main.c:376
+#: main.c:543
 msgid "License Agreement"
-msgstr ""
+msgstr "Contratto di licenza"
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
-msgstr ""
+msgstr "Licenza non accettata!"
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
-msgstr ""
+msgstr "Nessun Hard Disk trovato."
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
-msgstr ""
+msgstr "Selezione disco"
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
-msgstr ""
+msgstr "Selezionare il disco su cui si desidera installare IPFire. In primo luogo verrà partizionato, e quindi le partizioni avranno un filesystem.\n\nTUTTI I DATI SUL DISCO VERRANNO DISTRUTTI."
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
-msgstr ""
+msgstr "Non è stato selezionato alcun disco.\n\nSi prega di selezionare uno o più dischi su cui si desidera installare IPFire."
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -103,17 +165,17 @@ msgid ""
 "  %s\n"
 "\n"
 "Do you agree to continue?"
-msgstr ""
+msgstr "Il programma di installazione preparerà l'hard disk prescelto.\n\n%s\n\nSiete d'accordo di continuare?"
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
-msgstr ""
+msgstr "Disco di Installazione"
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
-msgstr ""
+msgstr "Elimina tutti i dati"
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -122,121 +184,148 @@ msgid ""
 "  %s\n"
 "\n"
 "Do you agree to continue?"
-msgstr ""
+msgstr "Il programma di installazione configurerà il RAID sul hard disk selezionato:\n\n%s\n%s\n\nSiete d'accordo di continuare?"
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
-msgstr ""
+msgstr "Installazione RAID"
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
-msgstr ""
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
+msgstr "La tua configurazione disco non è attualmente supportata."
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
-msgstr ""
+msgstr "Il disco rigido è troppo piccolo."
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
-msgstr ""
+msgstr "Il disco rigido è molto piccolo, ma puoi continuare senza una partizione di swap."
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
-msgstr ""
+msgstr "Filesystem ext4"
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
-msgstr ""
+msgstr "ext4 Filesystem senza journal"
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
-msgstr ""
+msgstr "Filesystem XFS"
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
-msgstr ""
+msgstr "Filesystem ReiserFS"
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
-msgstr ""
+msgstr "Selezione del filesystem"
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
-msgstr ""
+msgstr "Scegliere il filesystem:"
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
-msgstr ""
+msgstr "Costruzione RAID..."
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
-msgstr ""
+msgstr "Impossibile generare il RAID."
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
-msgstr ""
+msgstr "Partizionamento del disco..."
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
-msgstr ""
+msgstr "Impossibile partizionare il disco."
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
-msgstr ""
+msgstr "Creazione filesystem..."
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
-msgstr ""
+msgstr "Impossibile creare il filesystem."
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
-msgstr ""
+msgstr "Impossibile montare il filesystem."
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
-msgstr ""
+msgstr "Installazione del sistema..."
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
-msgstr ""
+msgstr "Impossibile installare il sistema."
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
-msgstr ""
+msgstr "Installazione della cache della lingua..."
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
-msgstr ""
+msgstr "Impossibile installare la cache della lingua."
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
-msgstr ""
+msgstr "Installazione del bootloader..."
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
-msgstr ""
+msgstr "Impossibile aprire /etc/default/grub per la scrittura."
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
-msgstr ""
+msgstr "Impossibile installare il bootloader."
+
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr "Un file di backup è stato trovato sull'immagine di installazione.\n\nVuoi ripristinare il backup?"
 
-#: main.c:666
+#: main.c:827
+msgid "Yes"
+msgstr "Sì"
+
+#: main.c:827
+msgid "No"
+msgstr "No"
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr "Si è verificato un errore durante il ripristino del file di backup"
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr "Esecuzione degli script post-installazione..."
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr "Script post-installazione fallito."
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
 "\n"
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
-msgstr ""
+msgstr "%s è stato installato con successo!\n\nSi prega di rimuovere eventuali supporti di installazione da questo sistema e premere il pulsante di riavvio. Una volta che il sistema è stato riavviato verrà chiesto di impostare le password di rete e di sistema.\nDopo di che, si dovrebbe puntare il browser web su https://%s:444 (o qualunque altro nome %s) per la console di configurazione web.\n "
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
-msgstr ""
+msgstr "Congratulazioni!"
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
-msgstr ""
+msgstr "Riavvio"
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
-msgstr ""
+msgstr "Installazione non riuscita. Premere Ok per riavviare."

diff --git a/src/installer/po/ja.po b/src/installer/po/ja.po
index 6cdadf5abf74b6f2e5668beb8ea861ebfe365600..5a14029690356241897e8b337c2a647f699b5348 100644 (file)
--- a/src/installer/po/ja.po
+++ b/src/installer/po/ja.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Japanese (http://www.transifex.com/projects/p/ipfire/language/ja/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: ja\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/ja_JP.po b/src/installer/po/ja_JP.po
new file mode 100644 (file)
index 0000000..1243121
--- /dev/null
+++ b/src/installer/po/ja_JP.po
@@ -0,0 +1,329 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR The IPFire Project (www.ipfire.org)
+# This file is distributed under the same license as the PACKAGE package.
+# 
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: IPFire Project\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-07-31 09:39+0000\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: Japanese (Japan) (http://www.transifex.com/projects/p/ipfire/language/ja_JP/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ja_JP\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
+msgid "OK"
+msgstr ""
+
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
+msgid "Cancel"
+msgstr ""
+
+#: main.c:176
+msgid "I accept this license"
+msgstr ""
+
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
+msgid "Language selection"
+msgstr ""
+
+#: main.c:403
+msgid "Select the language you wish to use for the installation."
+msgstr ""
+
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
+msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
+msgstr ""
+
+#: main.c:426
+#, c-format
+msgid ""
+"Welcome to the %s installation program.\n"
+"\n"
+"Selecting Cancel on any of the following screens will reboot the computer."
+msgstr ""
+
+#: main.c:428
+msgid "Start installation"
+msgstr ""
+
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
+msgstr ""
+
+#: main.c:501
+msgid "Downloading installation image..."
+msgstr ""
+
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
+msgstr ""
+
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
+msgid "License Agreement"
+msgstr ""
+
+#: main.c:544
+msgid "License not accepted!"
+msgstr ""
+
+#: main.c:566
+msgid "No hard disk found."
+msgstr ""
+
+#: main.c:587
+msgid "Disk Selection"
+msgstr ""
+
+#: main.c:588
+msgid ""
+"Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
+"\n"
+"ALL DATA ON THE DISK WILL BE DESTROYED."
+msgstr ""
+
+#: main.c:599
+msgid ""
+"No disk has been selected.\n"
+"\n"
+"Please select one or more disks you want to install IPFire on."
+msgstr ""
+
+#: main.c:617
+#, c-format
+msgid ""
+"The installation program will now prepare the chosen harddisk:\n"
+"\n"
+"  %s\n"
+"\n"
+"Do you agree to continue?"
+msgstr ""
+
+#: main.c:619
+msgid "Disk Setup"
+msgstr ""
+
+#: main.c:620 main.c:630
+msgid "Delete all data"
+msgstr ""
+
+#: main.c:627
+#, c-format
+msgid ""
+"The installation program will now set up a RAID configuration on the selected harddisks:\n"
+"\n"
+"  %s\n"
+"  %s\n"
+"\n"
+"Do you agree to continue?"
+msgstr ""
+
+#: main.c:629
+msgid "RAID Setup"
+msgstr ""
+
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
+msgstr ""
+
+#: main.c:655
+msgid "Your harddisk is too small."
+msgstr ""
+
+#: main.c:671
+msgid ""
+"Your harddisk is very small, but you can continue without a swap partition."
+msgstr ""
+
+#: main.c:684
+msgid "ext4 Filesystem"
+msgstr ""
+
+#: main.c:685
+msgid "ext4 Filesystem without journal"
+msgstr ""
+
+#: main.c:686
+msgid "XFS Filesystem"
+msgstr ""
+
+#: main.c:687
+msgid "ReiserFS Filesystem"
+msgstr ""
+
+#: main.c:701
+msgid "Filesystem Selection"
+msgstr ""
+
+#: main.c:701
+msgid "Please choose your filesystem:"
+msgstr ""
+
+#: main.c:712
+msgid "Building RAID..."
+msgstr ""
+
+#: main.c:716
+msgid "Unable to build the RAID."
+msgstr ""
+
+#: main.c:728
+msgid "Partitioning disk..."
+msgstr ""
+
+#: main.c:732
+msgid "Unable to partition the disk."
+msgstr ""
+
+#: main.c:739
+msgid "Creating filesystems..."
+msgstr ""
+
+#: main.c:743
+msgid "Unable to create filesystems."
+msgstr ""
+
+#: main.c:749
+msgid "Unable to mount filesystems."
+msgstr ""
+
+#: main.c:760
+msgid "Installing the system..."
+msgstr ""
+
+#: main.c:761
+msgid "Unable to install the system."
+msgstr ""
+
+#: main.c:777
+msgid "Installing the language cache..."
+msgstr ""
+
+#: main.c:778
+msgid "Unable to install the language cache."
+msgstr ""
+
+#: main.c:783
+msgid "Installing the bootloader..."
+msgstr ""
+
+#: main.c:790
+msgid "Unable to open /etc/default/grub for writing."
+msgstr ""
+
+#: main.c:812
+msgid "Unable to install the bootloader."
+msgstr ""
+
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
+#, c-format
+msgid ""
+"%s was successfully installed!\n"
+"\n"
+"Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
+msgstr ""
+
+#: main.c:882
+msgid "Congratulations!"
+msgstr ""
+
+#: main.c:882
+msgid "Reboot"
+msgstr ""
+
+#: main.c:893
+msgid "Setup has failed. Press Ok to reboot."
+msgstr ""

diff --git a/src/installer/po/jv.po b/src/installer/po/jv.po
new file mode 100644 (file)
index 0000000..333dea3
--- /dev/null
+++ b/src/installer/po/jv.po
@@ -0,0 +1,329 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR The IPFire Project (www.ipfire.org)
+# This file is distributed under the same license as the PACKAGE package.
+# 
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: IPFire Project\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-07-31 09:39+0000\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: Javanese (http://www.transifex.com/projects/p/ipfire/language/jv/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: jv\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
+msgid "OK"
+msgstr ""
+
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
+msgid "Cancel"
+msgstr ""
+
+#: main.c:176
+msgid "I accept this license"
+msgstr ""
+
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
+msgid "Language selection"
+msgstr ""
+
+#: main.c:403
+msgid "Select the language you wish to use for the installation."
+msgstr ""
+
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
+msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
+msgstr ""
+
+#: main.c:426
+#, c-format
+msgid ""
+"Welcome to the %s installation program.\n"
+"\n"
+"Selecting Cancel on any of the following screens will reboot the computer."
+msgstr ""
+
+#: main.c:428
+msgid "Start installation"
+msgstr ""
+
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
+msgstr ""
+
+#: main.c:501
+msgid "Downloading installation image..."
+msgstr ""
+
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
+msgstr ""
+
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
+msgid "License Agreement"
+msgstr ""
+
+#: main.c:544
+msgid "License not accepted!"
+msgstr ""
+
+#: main.c:566
+msgid "No hard disk found."
+msgstr ""
+
+#: main.c:587
+msgid "Disk Selection"
+msgstr ""
+
+#: main.c:588
+msgid ""
+"Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
+"\n"
+"ALL DATA ON THE DISK WILL BE DESTROYED."
+msgstr ""
+
+#: main.c:599
+msgid ""
+"No disk has been selected.\n"
+"\n"
+"Please select one or more disks you want to install IPFire on."
+msgstr ""
+
+#: main.c:617
+#, c-format
+msgid ""
+"The installation program will now prepare the chosen harddisk:\n"
+"\n"
+"  %s\n"
+"\n"
+"Do you agree to continue?"
+msgstr ""
+
+#: main.c:619
+msgid "Disk Setup"
+msgstr ""
+
+#: main.c:620 main.c:630
+msgid "Delete all data"
+msgstr ""
+
+#: main.c:627
+#, c-format
+msgid ""
+"The installation program will now set up a RAID configuration on the selected harddisks:\n"
+"\n"
+"  %s\n"
+"  %s\n"
+"\n"
+"Do you agree to continue?"
+msgstr ""
+
+#: main.c:629
+msgid "RAID Setup"
+msgstr ""
+
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
+msgstr ""
+
+#: main.c:655
+msgid "Your harddisk is too small."
+msgstr ""
+
+#: main.c:671
+msgid ""
+"Your harddisk is very small, but you can continue without a swap partition."
+msgstr ""
+
+#: main.c:684
+msgid "ext4 Filesystem"
+msgstr ""
+
+#: main.c:685
+msgid "ext4 Filesystem without journal"
+msgstr ""
+
+#: main.c:686
+msgid "XFS Filesystem"
+msgstr ""
+
+#: main.c:687
+msgid "ReiserFS Filesystem"
+msgstr ""
+
+#: main.c:701
+msgid "Filesystem Selection"
+msgstr ""
+
+#: main.c:701
+msgid "Please choose your filesystem:"
+msgstr ""
+
+#: main.c:712
+msgid "Building RAID..."
+msgstr ""
+
+#: main.c:716
+msgid "Unable to build the RAID."
+msgstr ""
+
+#: main.c:728
+msgid "Partitioning disk..."
+msgstr ""
+
+#: main.c:732
+msgid "Unable to partition the disk."
+msgstr ""
+
+#: main.c:739
+msgid "Creating filesystems..."
+msgstr ""
+
+#: main.c:743
+msgid "Unable to create filesystems."
+msgstr ""
+
+#: main.c:749
+msgid "Unable to mount filesystems."
+msgstr ""
+
+#: main.c:760
+msgid "Installing the system..."
+msgstr ""
+
+#: main.c:761
+msgid "Unable to install the system."
+msgstr ""
+
+#: main.c:777
+msgid "Installing the language cache..."
+msgstr ""
+
+#: main.c:778
+msgid "Unable to install the language cache."
+msgstr ""
+
+#: main.c:783
+msgid "Installing the bootloader..."
+msgstr ""
+
+#: main.c:790
+msgid "Unable to open /etc/default/grub for writing."
+msgstr ""
+
+#: main.c:812
+msgid "Unable to install the bootloader."
+msgstr ""
+
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
+#, c-format
+msgid ""
+"%s was successfully installed!\n"
+"\n"
+"Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
+msgstr ""
+
+#: main.c:882
+msgid "Congratulations!"
+msgstr ""
+
+#: main.c:882
+msgid "Reboot"
+msgstr ""
+
+#: main.c:893
+msgid "Setup has failed. Press Ok to reboot."
+msgstr ""

diff --git a/src/installer/po/km_KH.po b/src/installer/po/km_KH.po
index 0f7f9469d18fd4bbe617f7063b5463e678174aa9..b4e5f89660a6e08359757bdb37a6e2eb83fc662a 100644 (file)
--- a/src/installer/po/km_KH.po
+++ b/src/installer/po/km_KH.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Khmer (Cambodia) (http://www.transifex.com/projects/p/ipfire/language/km_KH/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: km_KH\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/nl.po b/src/installer/po/nl.po
index 6e2f7eaeb5443e7478ca7f00faad7809fbfb7521..009e9c4e1a2def5c4fab8efb180ce7b214fce7f5 100644 (file)
--- a/src/installer/po/nl.po
+++ b/src/installer/po/nl.po
@@ -3,13 +3,14 @@
 # This file is distributed under the same license as the PACKAGE package.
 # 
 # Translators:
+# Jacques Hylkema <j.hylkema@intronics.nl>, 2015
 msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
-"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2015-01-26 07:37+0000\n"
+"Last-Translator: Jacques Hylkema <j.hylkema@intronics.nl>\n"
 "Language-Team: Dutch (http://www.transifex.com/projects/p/ipfire/language/nl/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -17,85 +18,145 @@ msgstr ""
 "Language: nl\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
-msgstr ""
+msgstr "Oke"
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
-msgstr ""
+msgstr "Annuleren"
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
-msgstr ""
+msgstr "Ik accepteer deze licentie"
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr "Waarschuwing: Installatie zonder toezicht zal binnen 10 seconden starten..."
+
+#: main.c:403
 msgid "Language selection"
-msgstr ""
+msgstr "Taal selectie"
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
-msgstr ""
+msgstr "Selecteer de taal die je wil gebruiken voor de installatie."
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr "Zonder toezicht modus"
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
-msgstr ""
+msgstr "<Tab>/<Alt-Tab> tussen onderdelen | <Space> selecteer | <F12> volgend scherm"
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
 "\n"
 "Selecting Cancel on any of the following screens will reboot the computer."
-msgstr ""
+msgstr "Welkom bij het %s installatie programma.\n\nKiezen van Annuleren op een van de volgende schermen zal de computer opnieuw laten starten."
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
-msgstr ""
+msgstr "Start installatie"
 
-#: main.c:339
-msgid "No local source media found. Starting download."
-msgstr ""
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr "Het installatie programma zal nu proberen het installatiebestand te downloaden."
 
-#: main.c:340
-msgid "Downloading installation image ..."
-msgstr ""
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr "Er kon geen bron-schijf worden gevonden.\n\nJe kan proberen het benodigde installatie bestand te downloaden."
 
-#: main.c:342
-msgid "Download error"
-msgstr ""
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr "Verbindt uw machine aan een netwerk en het installatie programma zal proberen een IP adres te verkrijgen."
+
+#: main.c:460
+msgid "Download installation image"
+msgstr "Download installatie bestand"
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr "Bezig met starten van het netwerk (DHCP)..."
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr "Netwerk kon niet worden gestart, maar is vereist om door te kunnen gaan met de installatie.\n\nKoppel je machine aan een netwerk met een DHCP server en probeer opnieuw."
+
+#: main.c:487 main.c:516
+msgid "Retry"
+msgstr "Opnieuw"
+
+#: main.c:501
+msgid "Downloading installation image..."
+msgstr "Bezig met downloaden van het installatie bestand..."
+
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
+msgstr "MD5 checksum verschil"
+
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr "Het installatie bestand kon niet worden ge-download.\nReden: %s\n\n%s"
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr "Kon %s niet aankoppelen naar %s:\n%s\n"
 
-#: main.c:376
+#: main.c:543
 msgid "License Agreement"
-msgstr ""
+msgstr "Licentie overeenkomst"
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
-msgstr ""
+msgstr "Licentie niet geaccepteerd!"
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
-msgstr ""
+msgstr "Geen harde schijf gevonden."
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
-msgstr ""
+msgstr "Schijf selectie"
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
-msgstr ""
+msgstr "Selecteer de schijf/schijven waarop je IPFire op wil installeren. Deze zullen eerst worden gepartitioneerd, waarna er een bestandssysteem op zal worden gezet.\n\nALLE HUIDIGE GEGEVENS OP DE SCHIJF ZULLEN WORDEN VERNIETIGD. "
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
-msgstr ""
+msgstr "Er is geen schijf geselecteerd.\n\nSelecteer een of meerdere schijven waarop je IPFire op wil installeren."
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -103,17 +164,17 @@ msgid ""
 "  %s\n"
 "\n"
 "Do you agree to continue?"
-msgstr ""
+msgstr "Het installatie programma zal nu de geselecteerde harde schijf voorbereiden:\n\n%s\n\nGa je ermee accoord om door te gaan?"
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
-msgstr ""
+msgstr "Schijf configuratie"
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
-msgstr ""
+msgstr "Verwijder alle gegevens"
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -122,121 +183,148 @@ msgid ""
 "  %s\n"
 "\n"
 "Do you agree to continue?"
-msgstr ""
+msgstr "Het installatie programma zal nu een RAID configureren op de geselecteerde harde schijven:\n\n%s\n%s\n\nGa je ermee accoord om door te gaan?"
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
-msgstr ""
+msgstr "RAID configuratie"
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
-msgstr ""
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
+msgstr "Je schijf configuratie wordt momenteel niet ondersteund."
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
-msgstr ""
+msgstr "Je harde schijf is te klein."
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
-msgstr ""
+msgstr "Je harde schijf is erg klein, maar je kan doorgaan zonder een swap partitie."
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
-msgstr ""
+msgstr "ext4 bestandssysteem"
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
-msgstr ""
+msgstr "ext4 bestandssysteem zonder journaal"
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
-msgstr ""
+msgstr "XFS bestandssysteem"
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
-msgstr ""
+msgstr "ReiserFS bestandssysteem"
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
-msgstr ""
+msgstr "Bestandssysteem selectie"
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
-msgstr ""
+msgstr "Kies uw bestandssysteem:"
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
-msgstr ""
+msgstr "Opbouwen RAID..."
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
-msgstr ""
+msgstr "Kon RAID niet opbouwen."
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
-msgstr ""
+msgstr "Bezig met partitioneren van de schijf"
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
-msgstr ""
+msgstr "Kon schijf niet partitioneren."
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
-msgstr ""
+msgstr "Bezig met creëren bestandssystemen"
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
-msgstr ""
+msgstr "Kon bestandssystemen niet creëren."
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
-msgstr ""
+msgstr "Kon bestandssystemen niet aankoppelen."
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
-msgstr ""
+msgstr "Bezig met de installatie van het systeem..."
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
-msgstr ""
+msgstr "Kon het systeem niet installeren."
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
-msgstr ""
+msgstr "Bezig met installeren van de taal-cache..."
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
-msgstr ""
+msgstr "Kon de taal-cache niet installeren."
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
-msgstr ""
+msgstr "Bezig met installeren van de bootloader"
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
-msgstr ""
+msgstr "Kan /etc/default/grub niet openen met schrijfrechten"
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
-msgstr ""
+msgstr "Kon de bootloader niet installeren."
+
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr "Er is een backup bestand gevonden op de installatie disk.\n\nWil je deze backup terugzetten?"
 
-#: main.c:666
+#: main.c:827
+msgid "Yes"
+msgstr "Ja"
+
+#: main.c:827
+msgid "No"
+msgstr "Nee"
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr "Er is een fout opgetreden bij het terugzetten van de backup."
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr "Uitvoeren post-install script..."
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr "Fout bij uitvoeren van Post-install script"
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
 "\n"
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
-msgstr ""
+msgstr "%s was met succes geïnstalleerd!\n\nVerwijder de installatie disk en druk op de reboot knop. Nadat het systeem is herstart zal je worden gevraagd om het netwerk en systeem wachtwoorden in te stellen. Daarna moet je in je webbrowser navigeren naar https://%s:444 (of hoe je %s hebt genoemd) voor de web configuratie console."
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
-msgstr ""
+msgstr "Gefeliciteerd!"
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
-msgstr ""
+msgstr "Herstarten"
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
-msgstr ""
+msgstr "Installatie is mislukt. Druk op OK om te herstarten."

diff --git a/src/installer/po/pl.po b/src/installer/po/pl.po
index cfad680973741dfd400f694679fc85cbe39edee4..056eea142157300b4555d8e03c9bd6e404772175 100644 (file)
--- a/src/installer/po/pl.po
+++ b/src/installer/po/pl.po
@@ -3,13 +3,16 @@
 # This file is distributed under the same license as the PACKAGE package.
 # 
 # Translators:
+# btelega <btelega@gmail.com>, 2014
+# Przemysław Karpeta <przemyslaw.karpeta@gmail.com>, 2014
+# Przemyslaw Zdroik <zdroyer@gmail.com>, 2015
 msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
-"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2015-01-26 10:41+0000\n"
+"Last-Translator: Przemyslaw Zdroik <zdroyer@gmail.com>\n"
 "Language-Team: Polish (http://www.transifex.com/projects/p/ipfire/language/pl/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -17,85 +20,145 @@ msgstr ""
 "Language: pl\n"
 "Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
-msgstr ""
+msgstr "OK"
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
-msgstr ""
+msgstr "Anuluj"
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
-msgstr ""
+msgstr "Akceptuje licencje"
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr "Ostrzeżenie: Zautomatyzowana instalacja zacznie się za 10 sekund..."
+
+#: main.c:403
 msgid "Language selection"
-msgstr ""
+msgstr "Wybór języka"
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
-msgstr ""
+msgstr "Wybierz język jaki chcesz użyć do tej instalacji."
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr "Tryb zautomatyzowany"
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
-msgstr ""
+msgstr "<Tab>/<Alt-Tab> przełącza między pozycjami | <Space> wybiera | <F12> następny ekran"
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
 "\n"
 "Selecting Cancel on any of the following screens will reboot the computer."
-msgstr ""
+msgstr "Witaj w instalatorze %s.\n\nWybranie Cancel na dowolnym z następnych ekranów spowoduje restart komputera."
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
-msgstr ""
+msgstr "Rozpoczynam instalację"
 
-#: main.c:339
-msgid "No local source media found. Starting download."
-msgstr ""
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr "Instalator spróbuje teraz pobrać plik obrazu instalacji."
 
-#: main.c:340
-msgid "Downloading installation image ..."
-msgstr ""
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr "Medium źródłowe nie zostało znalezione.\n\nMożesz spróbować pobrać wymagany plik obrazu instalacji."
 
-#: main.c:342
-msgid "Download error"
-msgstr ""
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr "Podłącz twój komputer do sieci a instalator spróbuje połączyć się by pobrać adres IP."
+
+#: main.c:460
+msgid "Download installation image"
+msgstr "Pobierz pliku obrazu instalacji"
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr "Próba uruchomienia sieci (DHCP)..."
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr "Obsługa sieci, która jest wymagana do kontynuowania instalacji, nie mogła zostać uruchomiona \n\nPodłącz proszę twój komputer do sieci z działającym serwerem DHCP i Spróbuj ponownie."
+
+#: main.c:487 main.c:516
+msgid "Retry"
+msgstr "Spróbuj ponownie"
+
+#: main.c:501
+msgid "Downloading installation image..."
+msgstr "Pobieranie pliku obrazu instalacji..."
+
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
+msgstr "Niezgodność sumy kontrolnej MD5"
+
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr "Plik obrazu instalacji nie został pobrany\nPrzyczyna: %s\n\n%s"
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr "Nie można zamontować %s w %s:\n%s \n"
 
-#: main.c:376
+#: main.c:543
 msgid "License Agreement"
-msgstr ""
+msgstr "Umowa Licencyjna"
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
-msgstr ""
+msgstr "Licencja nie została zaakceptowana !"
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
-msgstr ""
+msgstr "Nie znaleziono twardego dysku."
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
-msgstr ""
+msgstr "Wybór Dysku"
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
-msgstr ""
+msgstr "Wybierz dysk(dyski), na którym ma zostać zainstalowany IPFire. Wybrane urządzenia zostaną podzielone na partycje, a na tych partycjach zostaną utworzone systemy plików. \n\nWSZYSTKIE ISTNIEJĄCE NA DYSKACH DANE ZOSTANĄ ZNISZCZONE."
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
-msgstr ""
+msgstr "Nie wybrano żadnego dysku.\n\nWybierz jeden lub więcej dysków, na których chesz zainstalować IPFire."
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -103,17 +166,17 @@ msgid ""
 "  %s\n"
 "\n"
 "Do you agree to continue?"
-msgstr ""
+msgstr "Instalator przygotuje teraz wybrany dysk twardy:\n\n  %s\n\nCzy kontynuować ?"
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
-msgstr ""
+msgstr "Konfiguracja Dysku"
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
-msgstr ""
+msgstr "Usuń wszystkie dane"
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -122,121 +185,148 @@ msgid ""
 "  %s\n"
 "\n"
 "Do you agree to continue?"
-msgstr ""
+msgstr "Instalator skonfiguruje teraz RAID na wybranych dyskach twardych:\n\n  %s\n  %s\n\nCzy kontynuować ?"
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
-msgstr ""
+msgstr "Konfiguracja RAID"
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
-msgstr ""
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
+msgstr "Twoja konfiguracja dysku nie jest aktualnie obsługiwana. "
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
-msgstr ""
+msgstr "Twój dysk twardy jest za mały"
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
-msgstr ""
+msgstr "Dysk twardy jest bardzo mały, ale można kontynuować bez partycji swap."
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
-msgstr ""
+msgstr "system plików ext4 "
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
-msgstr ""
+msgstr "system plików ext4 bez dziennika"
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
-msgstr ""
+msgstr "XFS Filesystem"
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
-msgstr ""
+msgstr "System plików ReiserFS"
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
-msgstr ""
+msgstr "System plików został wybrany"
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
-msgstr ""
+msgstr "Wybierz system plików:"
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
-msgstr ""
+msgstr "Tworzenie RAID ..."
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
-msgstr ""
+msgstr "Nie udało się utworzyć RAID."
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
-msgstr ""
+msgstr "Partycjonowanie dysku..."
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
-msgstr ""
+msgstr "Partycjonowanie dysku niemożliwe."
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
-msgstr ""
+msgstr "Tworzenie systemów plików..."
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
-msgstr ""
+msgstr "Nie można utworzyć systemów plików."
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
-msgstr ""
+msgstr "Nie można zamontować systemów plików."
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
-msgstr ""
+msgstr "Instalowanie systemu..."
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
-msgstr ""
+msgstr "Nie można zainstalować systemu."
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
-msgstr ""
+msgstr "Instalacja pamięci podręcznej języków."
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
-msgstr ""
+msgstr "Nie można zainstalować pamięci podręcznej języków."
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
-msgstr ""
+msgstr "Instalacja programu rozruchowego..."
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
-msgstr ""
+msgstr "Nie można otworzyć /etc/default/grub do zapisu."
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
-msgstr ""
+msgstr "Nie mogę zainstalować programu rozruchowego."
+
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr "Plik kopii zapasowej został odnaleziony w obrazie instalacji.\n\nCzy chcesz przywrócić informację ze znalezionej kopii zapasowej? "
 
-#: main.c:666
+#: main.c:827
+msgid "Yes"
+msgstr "Tak"
+
+#: main.c:827
+msgid "No"
+msgstr "Nie"
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr "Wystąpił błąd podczas przywracania pliku kopii zapasowej."
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr "Działanie skryptu post-instalacyjnego..."
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr "Skrypt post-instalacyjny zawiódł."
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
 "\n"
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
-msgstr ""
+msgstr "Instalacja %s zakończyła się sukcesem !\n\nProsze usunąć nośnik instalacyjny z systemu i wcisnąć przycisk restartu. Po restarcie systemu pojawi się prośba o skonfigurowanie sieci i ustawienie haseł systemowych. Następnie należy oworzyć w przeglądarce WWW adres https://%s:444 (lub inną nazwę, ktora została nadana %s), aby uzyskać dostęp do internetowej konsoli konfiguracyjnej."
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
-msgstr ""
+msgstr "Gratulacje!"
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
-msgstr ""
+msgstr "Uruchom ponownie"
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
-msgstr ""
+msgstr "Konfiguracja nieudana. Wciśnij Ok, aby zrestartować."

diff --git a/src/installer/po/pt_BR.po b/src/installer/po/pt_BR.po
index 0152eded00bf4128928c3edd7faeae2e4f07d104..dba4b65ceee61601758dfad780d3b3282c35ed1c 100644 (file)
--- a/src/installer/po/pt_BR.po
+++ b/src/installer/po/pt_BR.po
@@ -9,8 +9,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Portuguese (Brazil) (http://www.transifex.com/projects/p/ipfire/language/pt_BR/)\n"
 "MIME-Version: 1.0\n"
@@ -19,31 +19,40 @@ msgstr ""
 "Language: pt_BR\n"
 "Plural-Forms: nplurals=2; plural=(n > 1);\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr "Ok"
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr "Cancelar"
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr "Eu aceito esta licença"
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr "<Tab>/<Alt-Tab> entre os elementos | <Space> Selecione | <F12> próxima tela"
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -51,53 +60,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr "Iniciar a instalação"
 
-#: main.c:339
-msgid "No local source media found. Starting download."
-msgstr "Nenhuma fonte de mídia local encontrada. Iniciando download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
-msgstr "Baixando imagem de instalação ..."
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
 
-#: main.c:342
-msgid "Download error"
-msgstr "Erro de download"
+#: main.c:487 main.c:516
+msgid "Retry"
+msgstr ""
 
-#: main.c:376
+#: main.c:501
+msgid "Downloading installation image..."
+msgstr ""
+
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
+msgstr ""
+
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr "Licença não aceita!"
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr "Nenhum disco rígido foi encontrado."
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr "Seleção de disco"
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr "Selecione o disco(s) que deseja instalar o IPFire. Primeiramente o mesmo será particionado, e então, as partições terão um sistema de arquivos que você escolher. \n\nTODOS OS DADOS NO DISCO SERÃO DESTRUÍDOS."
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr "Nenhum disco foi selecionado.\n\nPor favor seleccione um ou mais discos que você deseja instalar o IPFire."
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -107,15 +167,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr "O programa de instalação irá agora preparar o disco rígido escolhido:\n\n%s \n\nVocê concorda em continuar?"
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr "Configuração de Discos"
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr "Apagar todos os dados"
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -126,104 +186,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr "O programa de instalação ira agora definir uma configuração de RAID nos discos rígidos selecionados:\n\n%s\n%s\n \nVocê concorda continuar?"
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr "Configuração de RAID"
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
-msgstr "Sua configuração de disco não é suportada atualmente."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
+msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr "Seu disco rígido é muito pequeno."
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr "Sistema de arquivos ext4"
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr "Sistema de arquivos ext4 sem journal"
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr "Sistema de arquivos XFS"
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr "Sistema de arquivos ReiserFS"
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr "Seleção do sistema de arquivos"
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr "Por favor, escolha o seu sistema de arquivos:"
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr "Construindo o RAID..."
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr "Não foi possível construir o RAID."
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr "Particionando o disco..."
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr "Não foi possível particionar o disco."
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr "Criando o sistema de arquivos..."
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr "Não foi possível criar sistemas de arquivos."
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr "Não foi possível montar sistemas de arquivos."
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr "Instalando o sistema..."
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr "Não é possível instalar o sistema."
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr "Instalando o cache de linguagem..."
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr "Não foi possível instalar o cache de linguagem."
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr "Instalando o gerenciador de inicialização..."
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr "Não foi possível instalar o gerenciador de inicialização."
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -231,14 +318,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr "Parabéns!"
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr "Reiniciar"
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/pt_PT.po b/src/installer/po/pt_PT.po
index ee41d97e99336b7f923dc529106a94183583af54..5b70188fc086d99a3de5d4181738b9b3d8ed37e2 100644 (file)
--- a/src/installer/po/pt_PT.po
+++ b/src/installer/po/pt_PT.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Portuguese (Portugal) (http://www.transifex.com/projects/p/ipfire/language/pt_PT/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: pt_PT\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/ro_RO.po b/src/installer/po/ro_RO.po
index 7fc70c81255fdbc24ef6f8f66d75cca6f0ccd2cb..6601c0b9e78bf2e7fb06a4223dd627edacfc37b2 100644 (file)
--- a/src/installer/po/ro_RO.po
+++ b/src/installer/po/ro_RO.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Romanian (Romania) (http://www.transifex.com/projects/p/ipfire/language/ro_RO/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: ro_RO\n"
 "Plural-Forms: nplurals=3; plural=(n==1?0:(((n%100>19)||((n%100==0)&&(n!=0)))?2:1));\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/ru.po b/src/installer/po/ru.po
index e3e0a8b354058c7051604b9bc1835974db40af09..7905236dbc3ac803f595a4b2347dd1f26832e382 100644 (file)
--- a/src/installer/po/ru.po
+++ b/src/installer/po/ru.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Russian (http://www.transifex.com/projects/p/ipfire/language/ru/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: ru\n"
 "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/ru_RU.po b/src/installer/po/ru_RU.po
new file mode 100644 (file)
index 0000000..83ee576
--- /dev/null
+++ b/src/installer/po/ru_RU.po
@@ -0,0 +1,329 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR The IPFire Project (www.ipfire.org)
+# This file is distributed under the same license as the PACKAGE package.
+# 
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: IPFire Project\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-07-31 09:39+0000\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: Russian (Russia) (http://www.transifex.com/projects/p/ipfire/language/ru_RU/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ru_RU\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
+msgid "OK"
+msgstr ""
+
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
+msgid "Cancel"
+msgstr ""
+
+#: main.c:176
+msgid "I accept this license"
+msgstr ""
+
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
+msgid "Language selection"
+msgstr ""
+
+#: main.c:403
+msgid "Select the language you wish to use for the installation."
+msgstr ""
+
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
+msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
+msgstr ""
+
+#: main.c:426
+#, c-format
+msgid ""
+"Welcome to the %s installation program.\n"
+"\n"
+"Selecting Cancel on any of the following screens will reboot the computer."
+msgstr ""
+
+#: main.c:428
+msgid "Start installation"
+msgstr ""
+
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
+msgstr ""
+
+#: main.c:501
+msgid "Downloading installation image..."
+msgstr ""
+
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
+msgstr ""
+
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
+msgid "License Agreement"
+msgstr ""
+
+#: main.c:544
+msgid "License not accepted!"
+msgstr ""
+
+#: main.c:566
+msgid "No hard disk found."
+msgstr ""
+
+#: main.c:587
+msgid "Disk Selection"
+msgstr ""
+
+#: main.c:588
+msgid ""
+"Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
+"\n"
+"ALL DATA ON THE DISK WILL BE DESTROYED."
+msgstr ""
+
+#: main.c:599
+msgid ""
+"No disk has been selected.\n"
+"\n"
+"Please select one or more disks you want to install IPFire on."
+msgstr ""
+
+#: main.c:617
+#, c-format
+msgid ""
+"The installation program will now prepare the chosen harddisk:\n"
+"\n"
+"  %s\n"
+"\n"
+"Do you agree to continue?"
+msgstr ""
+
+#: main.c:619
+msgid "Disk Setup"
+msgstr ""
+
+#: main.c:620 main.c:630
+msgid "Delete all data"
+msgstr ""
+
+#: main.c:627
+#, c-format
+msgid ""
+"The installation program will now set up a RAID configuration on the selected harddisks:\n"
+"\n"
+"  %s\n"
+"  %s\n"
+"\n"
+"Do you agree to continue?"
+msgstr ""
+
+#: main.c:629
+msgid "RAID Setup"
+msgstr ""
+
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
+msgstr ""
+
+#: main.c:655
+msgid "Your harddisk is too small."
+msgstr ""
+
+#: main.c:671
+msgid ""
+"Your harddisk is very small, but you can continue without a swap partition."
+msgstr ""
+
+#: main.c:684
+msgid "ext4 Filesystem"
+msgstr ""
+
+#: main.c:685
+msgid "ext4 Filesystem without journal"
+msgstr ""
+
+#: main.c:686
+msgid "XFS Filesystem"
+msgstr ""
+
+#: main.c:687
+msgid "ReiserFS Filesystem"
+msgstr ""
+
+#: main.c:701
+msgid "Filesystem Selection"
+msgstr ""
+
+#: main.c:701
+msgid "Please choose your filesystem:"
+msgstr ""
+
+#: main.c:712
+msgid "Building RAID..."
+msgstr ""
+
+#: main.c:716
+msgid "Unable to build the RAID."
+msgstr ""
+
+#: main.c:728
+msgid "Partitioning disk..."
+msgstr ""
+
+#: main.c:732
+msgid "Unable to partition the disk."
+msgstr ""
+
+#: main.c:739
+msgid "Creating filesystems..."
+msgstr ""
+
+#: main.c:743
+msgid "Unable to create filesystems."
+msgstr ""
+
+#: main.c:749
+msgid "Unable to mount filesystems."
+msgstr ""
+
+#: main.c:760
+msgid "Installing the system..."
+msgstr ""
+
+#: main.c:761
+msgid "Unable to install the system."
+msgstr ""
+
+#: main.c:777
+msgid "Installing the language cache..."
+msgstr ""
+
+#: main.c:778
+msgid "Unable to install the language cache."
+msgstr ""
+
+#: main.c:783
+msgid "Installing the bootloader..."
+msgstr ""
+
+#: main.c:790
+msgid "Unable to open /etc/default/grub for writing."
+msgstr ""
+
+#: main.c:812
+msgid "Unable to install the bootloader."
+msgstr ""
+
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
+#, c-format
+msgid ""
+"%s was successfully installed!\n"
+"\n"
+"Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
+msgstr ""
+
+#: main.c:882
+msgid "Congratulations!"
+msgstr ""
+
+#: main.c:882
+msgid "Reboot"
+msgstr ""
+
+#: main.c:893
+msgid "Setup has failed. Press Ok to reboot."
+msgstr ""

diff --git a/src/installer/po/rw.po b/src/installer/po/rw.po
new file mode 100644 (file)
index 0000000..e099182
--- /dev/null
+++ b/src/installer/po/rw.po
@@ -0,0 +1,329 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR The IPFire Project (www.ipfire.org)
+# This file is distributed under the same license as the PACKAGE package.
+# 
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: IPFire Project\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
+"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"Language-Team: Kinyarwanda (http://www.transifex.com/projects/p/ipfire/language/rw/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: rw\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
+msgid "OK"
+msgstr ""
+
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
+msgid "Cancel"
+msgstr ""
+
+#: main.c:176
+msgid "I accept this license"
+msgstr ""
+
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
+msgid "Language selection"
+msgstr ""
+
+#: main.c:403
+msgid "Select the language you wish to use for the installation."
+msgstr ""
+
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
+msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
+msgstr ""
+
+#: main.c:426
+#, c-format
+msgid ""
+"Welcome to the %s installation program.\n"
+"\n"
+"Selecting Cancel on any of the following screens will reboot the computer."
+msgstr ""
+
+#: main.c:428
+msgid "Start installation"
+msgstr ""
+
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
+msgstr ""
+
+#: main.c:501
+msgid "Downloading installation image..."
+msgstr ""
+
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
+msgstr ""
+
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
+msgid "License Agreement"
+msgstr ""
+
+#: main.c:544
+msgid "License not accepted!"
+msgstr ""
+
+#: main.c:566
+msgid "No hard disk found."
+msgstr ""
+
+#: main.c:587
+msgid "Disk Selection"
+msgstr ""
+
+#: main.c:588
+msgid ""
+"Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
+"\n"
+"ALL DATA ON THE DISK WILL BE DESTROYED."
+msgstr ""
+
+#: main.c:599
+msgid ""
+"No disk has been selected.\n"
+"\n"
+"Please select one or more disks you want to install IPFire on."
+msgstr ""
+
+#: main.c:617
+#, c-format
+msgid ""
+"The installation program will now prepare the chosen harddisk:\n"
+"\n"
+"  %s\n"
+"\n"
+"Do you agree to continue?"
+msgstr ""
+
+#: main.c:619
+msgid "Disk Setup"
+msgstr ""
+
+#: main.c:620 main.c:630
+msgid "Delete all data"
+msgstr ""
+
+#: main.c:627
+#, c-format
+msgid ""
+"The installation program will now set up a RAID configuration on the selected harddisks:\n"
+"\n"
+"  %s\n"
+"  %s\n"
+"\n"
+"Do you agree to continue?"
+msgstr ""
+
+#: main.c:629
+msgid "RAID Setup"
+msgstr ""
+
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
+msgstr ""
+
+#: main.c:655
+msgid "Your harddisk is too small."
+msgstr ""
+
+#: main.c:671
+msgid ""
+"Your harddisk is very small, but you can continue without a swap partition."
+msgstr ""
+
+#: main.c:684
+msgid "ext4 Filesystem"
+msgstr ""
+
+#: main.c:685
+msgid "ext4 Filesystem without journal"
+msgstr ""
+
+#: main.c:686
+msgid "XFS Filesystem"
+msgstr ""
+
+#: main.c:687
+msgid "ReiserFS Filesystem"
+msgstr ""
+
+#: main.c:701
+msgid "Filesystem Selection"
+msgstr ""
+
+#: main.c:701
+msgid "Please choose your filesystem:"
+msgstr ""
+
+#: main.c:712
+msgid "Building RAID..."
+msgstr ""
+
+#: main.c:716
+msgid "Unable to build the RAID."
+msgstr ""
+
+#: main.c:728
+msgid "Partitioning disk..."
+msgstr ""
+
+#: main.c:732
+msgid "Unable to partition the disk."
+msgstr ""
+
+#: main.c:739
+msgid "Creating filesystems..."
+msgstr ""
+
+#: main.c:743
+msgid "Unable to create filesystems."
+msgstr ""
+
+#: main.c:749
+msgid "Unable to mount filesystems."
+msgstr ""
+
+#: main.c:760
+msgid "Installing the system..."
+msgstr ""
+
+#: main.c:761
+msgid "Unable to install the system."
+msgstr ""
+
+#: main.c:777
+msgid "Installing the language cache..."
+msgstr ""
+
+#: main.c:778
+msgid "Unable to install the language cache."
+msgstr ""
+
+#: main.c:783
+msgid "Installing the bootloader..."
+msgstr ""
+
+#: main.c:790
+msgid "Unable to open /etc/default/grub for writing."
+msgstr ""
+
+#: main.c:812
+msgid "Unable to install the bootloader."
+msgstr ""
+
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
+#, c-format
+msgid ""
+"%s was successfully installed!\n"
+"\n"
+"Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
+msgstr ""
+
+#: main.c:882
+msgid "Congratulations!"
+msgstr ""
+
+#: main.c:882
+msgid "Reboot"
+msgstr ""
+
+#: main.c:893
+msgid "Setup has failed. Press Ok to reboot."
+msgstr ""

diff --git a/src/installer/po/sk.po b/src/installer/po/sk.po
index 86d37cd23ba64e361abfa319cfc146c60501e433..3766baea561850cd8e1fd7a642636b014c6f3dc1 100644 (file)
--- a/src/installer/po/sk.po
+++ b/src/installer/po/sk.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Slovak (http://www.transifex.com/projects/p/ipfire/language/sk/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: sk\n"
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/sq.po b/src/installer/po/sq.po
index 8ac31c1ada7cadca642e83dbfe2ad45392cc06ff..af653fd84c324dd5722fe50536623d3e62358bb3 100644 (file)
--- a/src/installer/po/sq.po
+++ b/src/installer/po/sq.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Albanian (http://www.transifex.com/projects/p/ipfire/language/sq/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: sq\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/sr.po b/src/installer/po/sr.po
new file mode 100644 (file)
index 0000000..97fad59
--- /dev/null
+++ b/src/installer/po/sr.po
@@ -0,0 +1,329 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR The IPFire Project (www.ipfire.org)
+# This file is distributed under the same license as the PACKAGE package.
+# 
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: IPFire Project\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-07-31 09:39+0000\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: Serbian (http://www.transifex.com/projects/p/ipfire/language/sr/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: sr\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
+msgid "OK"
+msgstr ""
+
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
+msgid "Cancel"
+msgstr ""
+
+#: main.c:176
+msgid "I accept this license"
+msgstr ""
+
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
+msgid "Language selection"
+msgstr ""
+
+#: main.c:403
+msgid "Select the language you wish to use for the installation."
+msgstr ""
+
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
+msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
+msgstr ""
+
+#: main.c:426
+#, c-format
+msgid ""
+"Welcome to the %s installation program.\n"
+"\n"
+"Selecting Cancel on any of the following screens will reboot the computer."
+msgstr ""
+
+#: main.c:428
+msgid "Start installation"
+msgstr ""
+
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
+msgstr ""
+
+#: main.c:501
+msgid "Downloading installation image..."
+msgstr ""
+
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
+msgstr ""
+
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
+msgid "License Agreement"
+msgstr ""
+
+#: main.c:544
+msgid "License not accepted!"
+msgstr ""
+
+#: main.c:566
+msgid "No hard disk found."
+msgstr ""
+
+#: main.c:587
+msgid "Disk Selection"
+msgstr ""
+
+#: main.c:588
+msgid ""
+"Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
+"\n"
+"ALL DATA ON THE DISK WILL BE DESTROYED."
+msgstr ""
+
+#: main.c:599
+msgid ""
+"No disk has been selected.\n"
+"\n"
+"Please select one or more disks you want to install IPFire on."
+msgstr ""
+
+#: main.c:617
+#, c-format
+msgid ""
+"The installation program will now prepare the chosen harddisk:\n"
+"\n"
+"  %s\n"
+"\n"
+"Do you agree to continue?"
+msgstr ""
+
+#: main.c:619
+msgid "Disk Setup"
+msgstr ""
+
+#: main.c:620 main.c:630
+msgid "Delete all data"
+msgstr ""
+
+#: main.c:627
+#, c-format
+msgid ""
+"The installation program will now set up a RAID configuration on the selected harddisks:\n"
+"\n"
+"  %s\n"
+"  %s\n"
+"\n"
+"Do you agree to continue?"
+msgstr ""
+
+#: main.c:629
+msgid "RAID Setup"
+msgstr ""
+
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
+msgstr ""
+
+#: main.c:655
+msgid "Your harddisk is too small."
+msgstr ""
+
+#: main.c:671
+msgid ""
+"Your harddisk is very small, but you can continue without a swap partition."
+msgstr ""
+
+#: main.c:684
+msgid "ext4 Filesystem"
+msgstr ""
+
+#: main.c:685
+msgid "ext4 Filesystem without journal"
+msgstr ""
+
+#: main.c:686
+msgid "XFS Filesystem"
+msgstr ""
+
+#: main.c:687
+msgid "ReiserFS Filesystem"
+msgstr ""
+
+#: main.c:701
+msgid "Filesystem Selection"
+msgstr ""
+
+#: main.c:701
+msgid "Please choose your filesystem:"
+msgstr ""
+
+#: main.c:712
+msgid "Building RAID..."
+msgstr ""
+
+#: main.c:716
+msgid "Unable to build the RAID."
+msgstr ""
+
+#: main.c:728
+msgid "Partitioning disk..."
+msgstr ""
+
+#: main.c:732
+msgid "Unable to partition the disk."
+msgstr ""
+
+#: main.c:739
+msgid "Creating filesystems..."
+msgstr ""
+
+#: main.c:743
+msgid "Unable to create filesystems."
+msgstr ""
+
+#: main.c:749
+msgid "Unable to mount filesystems."
+msgstr ""
+
+#: main.c:760
+msgid "Installing the system..."
+msgstr ""
+
+#: main.c:761
+msgid "Unable to install the system."
+msgstr ""
+
+#: main.c:777
+msgid "Installing the language cache..."
+msgstr ""
+
+#: main.c:778
+msgid "Unable to install the language cache."
+msgstr ""
+
+#: main.c:783
+msgid "Installing the bootloader..."
+msgstr ""
+
+#: main.c:790
+msgid "Unable to open /etc/default/grub for writing."
+msgstr ""
+
+#: main.c:812
+msgid "Unable to install the bootloader."
+msgstr ""
+
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
+#, c-format
+msgid ""
+"%s was successfully installed!\n"
+"\n"
+"Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
+msgstr ""
+
+#: main.c:882
+msgid "Congratulations!"
+msgstr ""
+
+#: main.c:882
+msgid "Reboot"
+msgstr ""
+
+#: main.c:893
+msgid "Setup has failed. Press Ok to reboot."
+msgstr ""

diff --git a/src/installer/po/su.po b/src/installer/po/su.po
new file mode 100644 (file)
index 0000000..758c337
--- /dev/null
+++ b/src/installer/po/su.po
@@ -0,0 +1,329 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR The IPFire Project (www.ipfire.org)
+# This file is distributed under the same license as the PACKAGE package.
+# 
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: IPFire Project\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-07-31 09:39+0000\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: Sundanese (http://www.transifex.com/projects/p/ipfire/language/su/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: su\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
+msgid "OK"
+msgstr ""
+
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
+msgid "Cancel"
+msgstr ""
+
+#: main.c:176
+msgid "I accept this license"
+msgstr ""
+
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
+msgid "Language selection"
+msgstr ""
+
+#: main.c:403
+msgid "Select the language you wish to use for the installation."
+msgstr ""
+
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
+msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
+msgstr ""
+
+#: main.c:426
+#, c-format
+msgid ""
+"Welcome to the %s installation program.\n"
+"\n"
+"Selecting Cancel on any of the following screens will reboot the computer."
+msgstr ""
+
+#: main.c:428
+msgid "Start installation"
+msgstr ""
+
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
+msgstr ""
+
+#: main.c:501
+msgid "Downloading installation image..."
+msgstr ""
+
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
+msgstr ""
+
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
+msgid "License Agreement"
+msgstr ""
+
+#: main.c:544
+msgid "License not accepted!"
+msgstr ""
+
+#: main.c:566
+msgid "No hard disk found."
+msgstr ""
+
+#: main.c:587
+msgid "Disk Selection"
+msgstr ""
+
+#: main.c:588
+msgid ""
+"Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
+"\n"
+"ALL DATA ON THE DISK WILL BE DESTROYED."
+msgstr ""
+
+#: main.c:599
+msgid ""
+"No disk has been selected.\n"
+"\n"
+"Please select one or more disks you want to install IPFire on."
+msgstr ""
+
+#: main.c:617
+#, c-format
+msgid ""
+"The installation program will now prepare the chosen harddisk:\n"
+"\n"
+"  %s\n"
+"\n"
+"Do you agree to continue?"
+msgstr ""
+
+#: main.c:619
+msgid "Disk Setup"
+msgstr ""
+
+#: main.c:620 main.c:630
+msgid "Delete all data"
+msgstr ""
+
+#: main.c:627
+#, c-format
+msgid ""
+"The installation program will now set up a RAID configuration on the selected harddisks:\n"
+"\n"
+"  %s\n"
+"  %s\n"
+"\n"
+"Do you agree to continue?"
+msgstr ""
+
+#: main.c:629
+msgid "RAID Setup"
+msgstr ""
+
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
+msgstr ""
+
+#: main.c:655
+msgid "Your harddisk is too small."
+msgstr ""
+
+#: main.c:671
+msgid ""
+"Your harddisk is very small, but you can continue without a swap partition."
+msgstr ""
+
+#: main.c:684
+msgid "ext4 Filesystem"
+msgstr ""
+
+#: main.c:685
+msgid "ext4 Filesystem without journal"
+msgstr ""
+
+#: main.c:686
+msgid "XFS Filesystem"
+msgstr ""
+
+#: main.c:687
+msgid "ReiserFS Filesystem"
+msgstr ""
+
+#: main.c:701
+msgid "Filesystem Selection"
+msgstr ""
+
+#: main.c:701
+msgid "Please choose your filesystem:"
+msgstr ""
+
+#: main.c:712
+msgid "Building RAID..."
+msgstr ""
+
+#: main.c:716
+msgid "Unable to build the RAID."
+msgstr ""
+
+#: main.c:728
+msgid "Partitioning disk..."
+msgstr ""
+
+#: main.c:732
+msgid "Unable to partition the disk."
+msgstr ""
+
+#: main.c:739
+msgid "Creating filesystems..."
+msgstr ""
+
+#: main.c:743
+msgid "Unable to create filesystems."
+msgstr ""
+
+#: main.c:749
+msgid "Unable to mount filesystems."
+msgstr ""
+
+#: main.c:760
+msgid "Installing the system..."
+msgstr ""
+
+#: main.c:761
+msgid "Unable to install the system."
+msgstr ""
+
+#: main.c:777
+msgid "Installing the language cache..."
+msgstr ""
+
+#: main.c:778
+msgid "Unable to install the language cache."
+msgstr ""
+
+#: main.c:783
+msgid "Installing the bootloader..."
+msgstr ""
+
+#: main.c:790
+msgid "Unable to open /etc/default/grub for writing."
+msgstr ""
+
+#: main.c:812
+msgid "Unable to install the bootloader."
+msgstr ""
+
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
+#, c-format
+msgid ""
+"%s was successfully installed!\n"
+"\n"
+"Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
+msgstr ""
+
+#: main.c:882
+msgid "Congratulations!"
+msgstr ""
+
+#: main.c:882
+msgid "Reboot"
+msgstr ""
+
+#: main.c:893
+msgid "Setup has failed. Press Ok to reboot."
+msgstr ""

diff --git a/src/installer/po/sv.po b/src/installer/po/sv.po
index 25e0ad4c0c80d5b0362e568a88c83947777cb0b5..b0e5ae7cee3bfef7d879ec7726363b89aca34400 100644 (file)
--- a/src/installer/po/sv.po
+++ b/src/installer/po/sv.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Swedish (http://www.transifex.com/projects/p/ipfire/language/sv/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: sv\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/th.po b/src/installer/po/th.po
index 2a88dca35b1054b17b17c1b26026953518e0f3ab..97842e8f5eeb99ebdff7e38c07db515687688f17 100644 (file)
--- a/src/installer/po/th.po
+++ b/src/installer/po/th.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Thai (http://www.transifex.com/projects/p/ipfire/language/th/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: th\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/tk.po b/src/installer/po/tk.po
index e07df58a2a9fa53426d485c39b66c1684f89a9ed..c753b72851e0bdf130c0d4e9f7a57a8e74a0d91a 100644 (file)
--- a/src/installer/po/tk.po
+++ b/src/installer/po/tk.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Turkmen (http://www.transifex.com/projects/p/ipfire/language/tk/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: tk\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/tr.po b/src/installer/po/tr.po
index 99a100ab8e7b208f4d2318234ffdc71e01fc1dd2..01984452b4d9dcc3aa50edcbae2da9a66236eef1 100644 (file)
--- a/src/installer/po/tr.po
+++ b/src/installer/po/tr.po
@@ -3,13 +3,15 @@
 # This file is distributed under the same license as the PACKAGE package.
 # 
 # Translators:
+# Kudret Emre <kudretemre@hotmail.com.tr>, 2014
+# Kudret Emre <kudretemre@hotmail.com.tr>, 2014
 msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
-"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-12-08 17:24+0000\n"
+"Last-Translator: Kudret Emre <kudretemre@hotmail.com.tr>\n"
 "Language-Team: Turkish (http://www.transifex.com/projects/p/ipfire/language/tr/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -17,85 +19,145 @@ msgstr ""
 "Language: tr\n"
 "Plural-Forms: nplurals=2; plural=(n > 1);\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
-msgstr ""
+msgstr "Tamam"
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
-msgstr ""
+msgstr "İptal"
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
-msgstr ""
+msgstr "Lisansı kabul ediyorum"
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr "Uyarı: Katılımsız kurulum 10 saniye içinde başlayacak..."
+
+#: main.c:403
 msgid "Language selection"
-msgstr ""
+msgstr "Dil seçimi"
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
-msgstr ""
+msgstr "Yükleme için istediğiniz dili seçin."
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr "Katılımsız kurulum modu"
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
-msgstr ""
+msgstr "<Tab>/<Alt-Tab> elementler arası geçiş | <Space> seç | <F12> sonraki ekran"
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
 "\n"
 "Selecting Cancel on any of the following screens will reboot the computer."
-msgstr ""
+msgstr "%s yükleme programına hoşgeldiniz.\n\nİlerleyen ekranların herhangi birinde İptal'e tıklamanız bilgisayarınızı yeniden başlatır."
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
-msgstr ""
+msgstr "Yüklemeyi başlat"
 
-#: main.c:339
-msgid "No local source media found. Starting download."
-msgstr ""
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr "Yükleyici şimdi yükleme dosyasını indirmeyi deneyecek."
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr "Hiçbir kaynak sürücüsü bulunamadı.\n\nGerekli yükleme dosyasını indirmeyi deneyebilirsiniz."
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:460
+msgid "Download installation image"
+msgstr "Yükleme dosyasını indir"
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr "Ağa bağlanmaya çalışılıyor (DHCP)..."
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr "Yüklemenin devam etmesi için ağ bağlantısı gereklidir fakat başlatılamıyor.\n\nLütfen makinenizi bir DHCP sunucu ile ağa bağlayıp tekrar deneyin."
+
+#: main.c:487 main.c:516
+msgid "Retry"
+msgstr "Tekrar dene"
+
+#: main.c:501
+msgid "Downloading installation image..."
+msgstr "Yükleme dosyası indiriliyor..."
+
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
+msgstr "MD5 checksum uyuşmuyor"
+
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr "Yükleme dosyası indirilemedi.\nSebep: %s\n\n%s"
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
 msgstr ""
 
-#: main.c:376
+#: main.c:543
 msgid "License Agreement"
-msgstr ""
+msgstr "Lisans Anlaşması"
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
-msgstr ""
+msgstr "Lisans kabul edilmedi!"
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
-msgstr ""
+msgstr "Sabit disk bulunamadı."
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
-msgstr ""
+msgstr "Disk Seçimi"
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
-msgstr ""
+msgstr "IPFire'ı yüklemek istediğiniz disk(ler)i seçin. Diskler önce bölümlenecek, sonra bölümlere dosya sistemi oluşturulacaktır.\n\nDİSKTEKİ TÜM VERİLER SİLİNECEKTİR."
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
-msgstr ""
+msgstr "Hiçbir disk seçilmedi.\n\nLütfen IPFire'ı yüklemek için bir veya daha fazla disk seçin."
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -103,17 +165,17 @@ msgid ""
 "  %s\n"
 "\n"
 "Do you agree to continue?"
-msgstr ""
+msgstr "Yükleme programı şimdi seçilen diski hazırlayacak:\n\n%s\n\nDevam etmek istiyor musunuz?"
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
-msgstr ""
+msgstr "Disk Kurulumu"
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
-msgstr ""
+msgstr "Tüm veriyi sil"
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -122,121 +184,148 @@ msgid ""
 "  %s\n"
 "\n"
 "Do you agree to continue?"
-msgstr ""
+msgstr "Yükleme programı şimdi seçilen sabit disk üzerinde bir RAID yapılandırması kuracak:\n\n%s\n%s\n\nDevam etmek istiyor musunuz?"
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
-msgstr ""
+msgstr "RAID Kurulumu"
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
-msgstr ""
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
+msgstr "Disk yapılandırmanız desteklenmiyor."
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
-msgstr ""
+msgstr "Sabit diskiniz çok küçük."
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
-msgstr ""
+msgstr "Sabit diskiniz çok küçük, fakat takas bölümü olmadan devam edebilirsiniz."
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
-msgstr ""
+msgstr "ext4 Dosya sistemi"
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
-msgstr ""
+msgstr "ext4 Dosya sistemi - günlüksüz"
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
-msgstr ""
+msgstr "XFS Dosya sistemi"
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
-msgstr ""
+msgstr "ReiserFS Dosya sistemi"
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
-msgstr ""
+msgstr "Dosya sistemi Seçimi"
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
-msgstr ""
+msgstr "Lütfen dosya sisteminizi seçin:"
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
-msgstr ""
+msgstr "RAID oluşturuluyor..."
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
-msgstr ""
+msgstr "RAID oluşturulamıyor."
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
-msgstr ""
+msgstr "Disk bölümleniyor..."
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
-msgstr ""
+msgstr "Disk bölümlendirilemiyor."
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
-msgstr ""
+msgstr "Dosya sistemleri oluşturuluyor..."
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
-msgstr ""
+msgstr "Dosya sistemleri oluşturulamıyor."
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
-msgstr ""
+msgstr "Dosya sistemleri bağlanamıyor."
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
-msgstr ""
+msgstr "Sistem yükleniyor..."
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
-msgstr ""
+msgstr "Sistem yüklenemiyor."
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
-msgstr ""
+msgstr "Dil ön blleği yükleniyor..."
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
-msgstr ""
+msgstr "Dil ön belleği yüklenemiyor."
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
-msgstr ""
+msgstr "bootloader yükleniyor..."
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
-msgstr ""
+msgstr "/etc/default/grub yazma işlemi için açılamıyor."
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
-msgstr ""
+msgstr "bootloader yüklenemiyor."
+
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr "Yükleme dosyasında bir yedekleme dosyası bulundu.\n\nYedeği geri yüklemek ister misiniz?"
+
+#: main.c:827
+msgid "Yes"
+msgstr "Evet"
 
-#: main.c:666
+#: main.c:827
+msgid "No"
+msgstr "Hayır"
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr "Yedek dosyası geri yüklenirken bir hata oluştu."
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr "post-install betiği çalıştırılıyor..."
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr "post-install betiği başarısız oldu."
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
 "\n"
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
-msgstr ""
+msgstr "%s başarıyla yüklendi!\n\nLütfen yükleme ortamlarını bu sistemden çıkarın ve yeniden başlatma butonuna tıklayın. Sistem yeniden başlatıldığında ağ ve sistem şifrenizi ayarlamanız istenecek. Daha sonra web yapılandırma konsoluna gitmek için yarayıcınızdan https://%s:444 (veya %s yerine ne isim verdiyseniz) adresine gidin."
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
-msgstr ""
+msgstr "Tebrikler!"
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
-msgstr ""
+msgstr "Yeniden başlat."
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
-msgstr ""
+msgstr "Kurulum başarısız oldu. Yeniden başlatmak için Tamam'a basın."

diff --git a/src/installer/po/uk.po b/src/installer/po/uk.po
index e6c955adafde422c9fa2f68c95f683ac6616f540..4a2ab67665a051ae3ba3255b08848392f82b8766 100644 (file)
--- a/src/installer/po/uk.po
+++ b/src/installer/po/uk.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Ukrainian (http://www.transifex.com/projects/p/ipfire/language/uk/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: uk\n"
 "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/uz@Latn.po b/src/installer/po/uz@Latn.po
index 2bdb551544cf86e1d4a8610b736bac80e0b1c768..8c688008d725147a9591e1f02f8b865fadfc1059 100644 (file)
--- a/src/installer/po/uz@Latn.po
+++ b/src/installer/po/uz@Latn.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Uzbek (Latin) (http://www.transifex.com/projects/p/ipfire/language/uz@Latn/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: uz@Latn\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/vi.po b/src/installer/po/vi.po
index 197382bfd79a20d80e65391faf8d6fd3e6e8973f..4f5b4558af92af2c66ca1f3cea048f69fe654ead 100644 (file)
--- a/src/installer/po/vi.po
+++ b/src/installer/po/vi.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Vietnamese (http://www.transifex.com/projects/p/ipfire/language/vi/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: vi\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/installer/po/zh.po b/src/installer/po/zh.po
index 3148f147d30d807be76352de84f8bc45371d3296..3dbca13b73aac14cd1e4f0e9584e9f56866de2cc 100644 (file)
--- a/src/installer/po/zh.po
+++ b/src/installer/po/zh.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-21 15:09+0000\n"
-"PO-Revision-Date: 2014-08-21 15:11+0000\n"
+"POT-Creation-Date: 2014-11-05 01:29+0000\n"
+"PO-Revision-Date: 2014-11-05 01:33+0000\n"
 "Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
 "Language-Team: Chinese (http://www.transifex.com/projects/p/ipfire/language/zh/)\n"
 "MIME-Version: 1.0\n"
@@ -17,31 +17,40 @@ msgstr ""
 "Language: zh\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 
-#: main.c:77 main.c:148 main.c:313 main.c:339 main.c:493 main.c:524 main.c:682
+#: main.c:78 main.c:179 main.c:404 main.c:670 main.c:702 main.c:893
 msgid "OK"
 msgstr ""
 
-#: main.c:78 main.c:446 main.c:456 main.c:493 main.c:524
+#: main.c:79 main.c:460 main.c:487 main.c:516 main.c:620 main.c:630 main.c:670
+#: main.c:702
 msgid "Cancel"
 msgstr ""
 
-#: main.c:145
+#: main.c:176
 msgid "I accept this license"
 msgstr ""
 
-#: main.c:312
+#: main.c:384
+msgid "Warning: Unattended installation will start in 10 seconds..."
+msgstr ""
+
+#: main.c:403
 msgid "Language selection"
 msgstr ""
 
-#: main.c:312
+#: main.c:403
 msgid "Select the language you wish to use for the installation."
 msgstr ""
 
-#: main.c:323
+#: main.c:418
+msgid "Unattended mode"
+msgstr ""
+
+#: main.c:420
 msgid "<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
 msgstr ""
 
-#: main.c:328
+#: main.c:426
 #, c-format
 msgid ""
 "Welcome to the %s installation program.\n"
@@ -49,53 +58,104 @@ msgid ""
 "Selecting Cancel on any of the following screens will reboot the computer."
 msgstr ""
 
-#: main.c:330
+#: main.c:428
 msgid "Start installation"
 msgstr ""
 
-#: main.c:339
-msgid "No local source media found. Starting download."
+#: main.c:449
+#, c-format
+msgid "The installer will now try downloading the installation image."
+msgstr ""
+
+#: main.c:452
+#, c-format
+msgid ""
+"No source drive could be found.\n"
+"\n"
+"You can try downloading the required installation image."
+msgstr ""
+
+#: main.c:456
+msgid ""
+"Please make sure to connect your machine to a network and the installer will"
+" try connect to acquire an IP address."
+msgstr ""
+
+#: main.c:460
+msgid "Download installation image"
+msgstr ""
+
+#: main.c:473
+msgid "Trying to start networking (DHCP)..."
+msgstr ""
+
+#: main.c:484
+msgid ""
+"Networking could not be started but is required to go on with the installation.\n"
+"\n"
+"Please connect your machine to a network with a DHCP server and retry."
+msgstr ""
+
+#: main.c:487 main.c:516
+msgid "Retry"
 msgstr ""
 
-#: main.c:340
-msgid "Downloading installation image ..."
+#: main.c:501
+msgid "Downloading installation image..."
 msgstr ""
 
-#: main.c:342
-msgid "Download error"
+#: main.c:510
+#, c-format
+msgid "MD5 checksum mismatch"
 msgstr ""
 
-#: main.c:376
+#: main.c:513
+#, c-format
+msgid ""
+"The installation image could not be downloaded.\n"
+"  Reason: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: main.c:528
+#, c-format
+msgid ""
+"Could not mount %s to %s:\n"
+"  %s\n"
+msgstr ""
+
+#: main.c:543
 msgid "License Agreement"
 msgstr ""
 
-#: main.c:377
+#: main.c:544
 msgid "License not accepted!"
 msgstr ""
 
-#: main.c:399
+#: main.c:566
 msgid "No hard disk found."
 msgstr ""
 
-#: main.c:418
+#: main.c:587
 msgid "Disk Selection"
 msgstr ""
 
-#: main.c:419
+#: main.c:588
 msgid ""
 "Select the disk(s) you want to install IPFire on. First those will be partitioned, and then the partitions will have a filesystem put on them.\n"
 "\n"
 "ALL DATA ON THE DISK WILL BE DESTROYED."
 msgstr ""
 
-#: main.c:430
+#: main.c:599
 msgid ""
 "No disk has been selected.\n"
 "\n"
 "Please select one or more disks you want to install IPFire on."
 msgstr ""
 
-#: main.c:443
+#: main.c:617
 #, c-format
 msgid ""
 "The installation program will now prepare the chosen harddisk:\n"
@@ -105,15 +165,15 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:445
+#: main.c:619
 msgid "Disk Setup"
 msgstr ""
 
-#: main.c:446 main.c:456
+#: main.c:620 main.c:630
 msgid "Delete all data"
 msgstr ""
 
-#: main.c:453
+#: main.c:627
 #, c-format
 msgid ""
 "The installation program will now set up a RAID configuration on the selected harddisks:\n"
@@ -124,104 +184,131 @@ msgid ""
 "Do you agree to continue?"
 msgstr ""
 
-#: main.c:455
+#: main.c:629
 msgid "RAID Setup"
 msgstr ""
 
-#: main.c:466
-msgid "You disk configuration is currently not supported."
+#: main.c:640
+msgid "Your disk configuration is currently not supported."
 msgstr ""
 
-#: main.c:480
+#: main.c:655
 msgid "Your harddisk is too small."
 msgstr ""
 
-#: main.c:494
+#: main.c:671
 msgid ""
 "Your harddisk is very small, but you can continue without a swap partition."
 msgstr ""
 
-#: main.c:506
+#: main.c:684
 msgid "ext4 Filesystem"
 msgstr ""
 
-#: main.c:507
+#: main.c:685
 msgid "ext4 Filesystem without journal"
 msgstr ""
 
-#: main.c:508
+#: main.c:686
 msgid "XFS Filesystem"
 msgstr ""
 
-#: main.c:509
+#: main.c:687
 msgid "ReiserFS Filesystem"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Filesystem Selection"
 msgstr ""
 
-#: main.c:523
+#: main.c:701
 msgid "Please choose your filesystem:"
 msgstr ""
 
-#: main.c:534
+#: main.c:712
 msgid "Building RAID..."
 msgstr ""
 
-#: main.c:538
+#: main.c:716
 msgid "Unable to build the RAID."
 msgstr ""
 
-#: main.c:550
+#: main.c:728
 msgid "Partitioning disk..."
 msgstr ""
 
-#: main.c:554
+#: main.c:732
 msgid "Unable to partition the disk."
 msgstr ""
 
-#: main.c:561
+#: main.c:739
 msgid "Creating filesystems..."
 msgstr ""
 
-#: main.c:565
+#: main.c:743
 msgid "Unable to create filesystems."
 msgstr ""
 
-#: main.c:571
+#: main.c:749
 msgid "Unable to mount filesystems."
 msgstr ""
 
-#: main.c:582
+#: main.c:760
 msgid "Installing the system..."
 msgstr ""
 
-#: main.c:583
+#: main.c:761
 msgid "Unable to install the system."
 msgstr ""
 
-#: main.c:599
+#: main.c:777
 msgid "Installing the language cache..."
 msgstr ""
 
-#: main.c:600
+#: main.c:778
 msgid "Unable to install the language cache."
 msgstr ""
 
-#: main.c:605
+#: main.c:783
 msgid "Installing the bootloader..."
 msgstr ""
 
-#: main.c:612
+#: main.c:790
 msgid "Unable to open /etc/default/grub for writing."
 msgstr ""
 
-#: main.c:634
+#: main.c:812
 msgid "Unable to install the bootloader."
 msgstr ""
 
-#: main.c:666
+#: main.c:826
+msgid ""
+"A backup file has been found on the installation image.\n"
+"\n"
+"Do you want to restore the backup?"
+msgstr ""
+
+#: main.c:827
+msgid "Yes"
+msgstr ""
+
+#: main.c:827
+msgid "No"
+msgstr ""
+
+#: main.c:834
+msgid "An error occured when the backup file was restored."
+msgstr ""
+
+#: main.c:869
+msgid "Running post-install script..."
+msgstr ""
+
+#: main.c:870
+msgid "Post-install script failed."
+msgstr ""
+
+#: main.c:877
 #, c-format
 msgid ""
 "%s was successfully installed!\n"
@@ -229,14 +316,14 @@ msgid ""
 "Please remove any installation mediums from this system and hit the reboot button. Once the system has restarted you will be asked to setup networking and system passwords. After that, you should point your web browser at https://%s:444 (or what ever you name your %s) for the web configuration console."
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Congratulations!"
 msgstr ""
 
-#: main.c:671
+#: main.c:882
 msgid "Reboot"
 msgstr ""
 
-#: main.c:682
+#: main.c:893
 msgid "Setup has failed. Press Ok to reboot."
 msgstr ""

diff --git a/src/patches/backports-3.18.1-1-add_usbnet_modules.patch b/src/patches/backports-3.18.1-1-add_usbnet_modules.patch
new file mode 100644 (file)
index 0000000..11b9638
--- /dev/null
+++ b/src/patches/backports-3.18.1-1-add_usbnet_modules.patch
@@ -0,0 +1,29383 @@
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/asix_common.c backports-3.18.1-1/drivers/net/usb/asix_common.c
+--- backports-3.18.1-1.org/drivers/net/usb/asix_common.c       1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/asix_common.c   2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,582 @@
++/*
++ * ASIX AX8817X based USB 2.0 Ethernet Devices
++ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
++ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
++ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
++ * Copyright (c) 2002-2003 TiVo Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include "asix.h"
++
++int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
++                u16 size, void *data)
++{
++      int ret;
++      ret = usbnet_read_cmd(dev, cmd,
++                             USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
++                             value, index, data, size);
++
++      if (ret != size && ret >= 0)
++              return -EINVAL;
++      return ret;
++}
++
++int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
++                 u16 size, void *data)
++{
++      return usbnet_write_cmd(dev, cmd,
++                              USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
++                              value, index, data, size);
++}
++
++void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
++                        u16 size, void *data)
++{
++      usbnet_write_cmd_async(dev, cmd,
++                             USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
++                             value, index, data, size);
++}
++
++int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb,
++                         struct asix_rx_fixup_info *rx)
++{
++      int offset = 0;
++
++      while (offset + sizeof(u16) <= skb->len) {
++              u16 remaining = 0;
++              unsigned char *data;
++
++              if (!rx->size) {
++                      if ((skb->len - offset == sizeof(u16)) ||
++                          rx->split_head) {
++                              if(!rx->split_head) {
++                                      rx->header = get_unaligned_le16(
++                                                      skb->data + offset);
++                                      rx->split_head = true;
++                                      offset += sizeof(u16);
++                                      break;
++                              } else {
++                                      rx->header |= (get_unaligned_le16(
++                                                      skb->data + offset)
++                                                      << 16);
++                                      rx->split_head = false;
++                                      offset += sizeof(u16);
++                              }
++                      } else {
++                              rx->header = get_unaligned_le32(skb->data +
++                                                              offset);
++                              offset += sizeof(u32);
++                      }
++
++                      /* get the packet length */
++                      rx->size = (u16) (rx->header & 0x7ff);
++                      if (rx->size != ((~rx->header >> 16) & 0x7ff)) {
++                              netdev_err(dev->net, "asix_rx_fixup() Bad Header Length 0x%x, offset %d\n",
++                                         rx->header, offset);
++                              rx->size = 0;
++                              return 0;
++                      }
++                      rx->ax_skb = netdev_alloc_skb_ip_align(dev->net,
++                                                             rx->size);
++                      if (!rx->ax_skb)
++                              return 0;
++              }
++
++              if (rx->size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) {
++                      netdev_err(dev->net, "asix_rx_fixup() Bad RX Length %d\n",
++                                 rx->size);
++                      kfree_skb(rx->ax_skb);
++                      rx->ax_skb = NULL;
++                      rx->size = 0U;
++
++                      return 0;
++              }
++
++              if (rx->size > skb->len - offset) {
++                      remaining = rx->size - (skb->len - offset);
++                      rx->size = skb->len - offset;
++              }
++
++              data = skb_put(rx->ax_skb, rx->size);
++              memcpy(data, skb->data + offset, rx->size);
++              if (!remaining)
++                      usbnet_skb_return(dev, rx->ax_skb);
++
++              offset += (rx->size + 1) & 0xfffe;
++              rx->size = remaining;
++      }
++
++      if (skb->len != offset) {
++              netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d, %d\n",
++                         skb->len, offset);
++              return 0;
++      }
++
++      return 1;
++}
++
++int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb)
++{
++      struct asix_common_private *dp = dev->driver_priv;
++      struct asix_rx_fixup_info *rx = &dp->rx_fixup_info;
++
++      return asix_rx_fixup_internal(dev, skb, rx);
++}
++
++struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
++                            gfp_t flags)
++{
++      int padlen;
++      int headroom = skb_headroom(skb);
++      int tailroom = skb_tailroom(skb);
++      u32 packet_len;
++      u32 padbytes = 0xffff0000;
++
++      padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4;
++
++      /* We need to push 4 bytes in front of frame (packet_len)
++       * and maybe add 4 bytes after the end (if padlen is 4)
++       *
++       * Avoid skb_copy_expand() expensive call, using following rules :
++       * - We are allowed to push 4 bytes in headroom if skb_header_cloned()
++       *   is false (and if we have 4 bytes of headroom)
++       * - We are allowed to put 4 bytes at tail if skb_cloned()
++       *   is false (and if we have 4 bytes of tailroom)
++       *
++       * TCP packets for example are cloned, but skb_header_release()
++       * was called in tcp stack, allowing us to use headroom for our needs.
++       */
++      if (!skb_header_cloned(skb) &&
++          !(padlen && skb_cloned(skb)) &&
++          headroom + tailroom >= 4 + padlen) {
++              /* following should not happen, but better be safe */
++              if (headroom < 4 ||
++                  tailroom < padlen) {
++                      skb->data = memmove(skb->head + 4, skb->data, skb->len);
++                      skb_set_tail_pointer(skb, skb->len);
++              }
++      } else {
++              struct sk_buff *skb2;
++
++              skb2 = skb_copy_expand(skb, 4, padlen, flags);
++              dev_kfree_skb_any(skb);
++              skb = skb2;
++              if (!skb)
++                      return NULL;
++      }
++
++      packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len;
++      skb_push(skb, 4);
++      cpu_to_le32s(&packet_len);
++      skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len));
++
++      if (padlen) {
++              cpu_to_le32s(&padbytes);
++              memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes));
++              skb_put(skb, sizeof(padbytes));
++      }
++      return skb;
++}
++
++int asix_set_sw_mii(struct usbnet *dev)
++{
++      int ret;
++      ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
++      if (ret < 0)
++              netdev_err(dev->net, "Failed to enable software MII access\n");
++      return ret;
++}
++
++int asix_set_hw_mii(struct usbnet *dev)
++{
++      int ret;
++      ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
++      if (ret < 0)
++              netdev_err(dev->net, "Failed to enable hardware MII access\n");
++      return ret;
++}
++
++int asix_read_phy_addr(struct usbnet *dev, int internal)
++{
++      int offset = (internal ? 1 : 0);
++      u8 buf[2];
++      int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
++
++      netdev_dbg(dev->net, "asix_get_phy_addr()\n");
++
++      if (ret < 0) {
++              netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret);
++              goto out;
++      }
++      netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n",
++                 *((__le16 *)buf));
++      ret = buf[offset];
++
++out:
++      return ret;
++}
++
++int asix_get_phy_addr(struct usbnet *dev)
++{
++      /* return the address of the internal phy */
++      return asix_read_phy_addr(dev, 1);
++}
++
++
++int asix_sw_reset(struct usbnet *dev, u8 flags)
++{
++      int ret;
++
++        ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
++      if (ret < 0)
++              netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
++
++      return ret;
++}
++
++u16 asix_read_rx_ctl(struct usbnet *dev)
++{
++      __le16 v;
++      int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v);
++
++      if (ret < 0) {
++              netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
++              goto out;
++      }
++      ret = le16_to_cpu(v);
++out:
++      return ret;
++}
++
++int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
++{
++      int ret;
++
++      netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
++      ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
++      if (ret < 0)
++              netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
++                         mode, ret);
++
++      return ret;
++}
++
++u16 asix_read_medium_status(struct usbnet *dev)
++{
++      __le16 v;
++      int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
++
++      if (ret < 0) {
++              netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
++                         ret);
++              return ret;     /* TODO: callers not checking for error ret */
++      }
++
++      return le16_to_cpu(v);
++
++}
++
++int asix_write_medium_mode(struct usbnet *dev, u16 mode)
++{
++      int ret;
++
++      netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
++      ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
++      if (ret < 0)
++              netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
++                         mode, ret);
++
++      return ret;
++}
++
++int asix_write_gpio(struct usbnet *dev, u16 value, int sleep)
++{
++      int ret;
++
++      netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
++      ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
++      if (ret < 0)
++              netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
++                         value, ret);
++
++      if (sleep)
++              msleep(sleep);
++
++      return ret;
++}
++
++/*
++ * AX88772 & AX88178 have a 16-bit RX_CTL value
++ */
++void asix_set_multicast(struct net_device *net)
++{
++      struct usbnet *dev = netdev_priv(net);
++      struct asix_data *data = (struct asix_data *)&dev->data;
++      u16 rx_ctl = AX_DEFAULT_RX_CTL;
++
++      if (net->flags & IFF_PROMISC) {
++              rx_ctl |= AX_RX_CTL_PRO;
++      } else if (net->flags & IFF_ALLMULTI ||
++                 netdev_mc_count(net) > AX_MAX_MCAST) {
++              rx_ctl |= AX_RX_CTL_AMALL;
++      } else if (netdev_mc_empty(net)) {
++              /* just broadcast and directed */
++      } else {
++              /* We use the 20 byte dev->data
++               * for our 8 byte filter buffer
++               * to avoid allocating memory that
++               * is tricky to free later */
++              struct netdev_hw_addr *ha;
++              u32 crc_bits;
++
++              memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
++
++              /* Build the multicast hash filter. */
++              netdev_for_each_mc_addr(ha, net) {
++                      crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
++                      data->multi_filter[crc_bits >> 3] |=
++                          1 << (crc_bits & 7);
++              }
++
++              asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
++                                 AX_MCAST_FILTER_SIZE, data->multi_filter);
++
++              rx_ctl |= AX_RX_CTL_AM;
++      }
++
++      asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
++}
++
++int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      __le16 res;
++
++      mutex_lock(&dev->phy_mutex);
++      asix_set_sw_mii(dev);
++      asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
++                              (__u16)loc, 2, &res);
++      asix_set_hw_mii(dev);
++      mutex_unlock(&dev->phy_mutex);
++
++      netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
++                 phy_id, loc, le16_to_cpu(res));
++
++      return le16_to_cpu(res);
++}
++
++void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      __le16 res = cpu_to_le16(val);
++
++      netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
++                 phy_id, loc, val);
++      mutex_lock(&dev->phy_mutex);
++      asix_set_sw_mii(dev);
++      asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
++      asix_set_hw_mii(dev);
++      mutex_unlock(&dev->phy_mutex);
++}
++
++void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
++{
++      struct usbnet *dev = netdev_priv(net);
++      u8 opt;
++
++      if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
++              wolinfo->supported = 0;
++              wolinfo->wolopts = 0;
++              return;
++      }
++      wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
++      wolinfo->wolopts = 0;
++      if (opt & AX_MONITOR_LINK)
++              wolinfo->wolopts |= WAKE_PHY;
++      if (opt & AX_MONITOR_MAGIC)
++              wolinfo->wolopts |= WAKE_MAGIC;
++}
++
++int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
++{
++      struct usbnet *dev = netdev_priv(net);
++      u8 opt = 0;
++
++      if (wolinfo->wolopts & WAKE_PHY)
++              opt |= AX_MONITOR_LINK;
++      if (wolinfo->wolopts & WAKE_MAGIC)
++              opt |= AX_MONITOR_MAGIC;
++
++      if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
++                            opt, 0, 0, NULL) < 0)
++              return -EINVAL;
++
++      return 0;
++}
++
++int asix_get_eeprom_len(struct net_device *net)
++{
++      return AX_EEPROM_LEN;
++}
++
++int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
++                  u8 *data)
++{
++      struct usbnet *dev = netdev_priv(net);
++      u16 *eeprom_buff;
++      int first_word, last_word;
++      int i;
++
++      if (eeprom->len == 0)
++              return -EINVAL;
++
++      eeprom->magic = AX_EEPROM_MAGIC;
++
++      first_word = eeprom->offset >> 1;
++      last_word = (eeprom->offset + eeprom->len - 1) >> 1;
++
++      eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1),
++                            GFP_KERNEL);
++      if (!eeprom_buff)
++              return -ENOMEM;
++
++      /* ax8817x returns 2 bytes from eeprom on read */
++      for (i = first_word; i <= last_word; i++) {
++              if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2,
++                                &(eeprom_buff[i - first_word])) < 0) {
++                      kfree(eeprom_buff);
++                      return -EIO;
++              }
++      }
++
++      memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
++      kfree(eeprom_buff);
++      return 0;
++}
++
++int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
++                  u8 *data)
++{
++      struct usbnet *dev = netdev_priv(net);
++      u16 *eeprom_buff;
++      int first_word, last_word;
++      int i;
++      int ret;
++
++      netdev_dbg(net, "write EEPROM len %d, offset %d, magic 0x%x\n",
++                 eeprom->len, eeprom->offset, eeprom->magic);
++
++      if (eeprom->len == 0)
++              return -EINVAL;
++
++      if (eeprom->magic != AX_EEPROM_MAGIC)
++              return -EINVAL;
++
++      first_word = eeprom->offset >> 1;
++      last_word = (eeprom->offset + eeprom->len - 1) >> 1;
++
++      eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1),
++                            GFP_KERNEL);
++      if (!eeprom_buff)
++              return -ENOMEM;
++
++      /* align data to 16 bit boundaries, read the missing data from
++         the EEPROM */
++      if (eeprom->offset & 1) {
++              ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2,
++                                  &(eeprom_buff[0]));
++              if (ret < 0) {
++                      netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word);
++                      goto free;
++              }
++      }
++
++      if ((eeprom->offset + eeprom->len) & 1) {
++              ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2,
++                                  &(eeprom_buff[last_word - first_word]));
++              if (ret < 0) {
++                      netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word);
++                      goto free;
++              }
++      }
++
++      memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len);
++
++      /* write data to EEPROM */
++      ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL);
++      if (ret < 0) {
++              netdev_err(net, "Failed to enable EEPROM write\n");
++              goto free;
++      }
++      msleep(20);
++
++      for (i = first_word; i <= last_word; i++) {
++              netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n",
++                         i, eeprom_buff[i - first_word]);
++              ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i,
++                                   eeprom_buff[i - first_word], 0, NULL);
++              if (ret < 0) {
++                      netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n",
++                                 i);
++                      goto free;
++              }
++              msleep(20);
++      }
++
++      ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL);
++      if (ret < 0) {
++              netdev_err(net, "Failed to disable EEPROM write\n");
++              goto free;
++      }
++
++      ret = 0;
++free:
++      kfree(eeprom_buff);
++      return ret;
++}
++
++void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
++{
++      /* Inherit standard device info */
++      usbnet_get_drvinfo(net, info);
++      strlcpy(info->driver, DRIVER_NAME, sizeof(info->driver));
++      strlcpy(info->version, DRIVER_VERSION, sizeof(info->version));
++      info->eedump_len = AX_EEPROM_LEN;
++}
++
++int asix_set_mac_address(struct net_device *net, void *p)
++{
++      struct usbnet *dev = netdev_priv(net);
++      struct asix_data *data = (struct asix_data *)&dev->data;
++      struct sockaddr *addr = p;
++
++      if (netif_running(net))
++              return -EBUSY;
++      if (!is_valid_ether_addr(addr->sa_data))
++              return -EADDRNOTAVAIL;
++
++      memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
++
++      /* We use the 20 byte dev->data
++       * for our 6 byte mac buffer
++       * to avoid allocating memory that
++       * is tricky to free later */
++      memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
++      asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
++                                                      data->mac_addr);
++
++      return 0;
++}
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/asix_devices.c backports-3.18.1-1/drivers/net/usb/asix_devices.c
+--- backports-3.18.1-1.org/drivers/net/usb/asix_devices.c      1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/asix_devices.c  2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,1104 @@
++/*
++ * ASIX AX8817X based USB 2.0 Ethernet Devices
++ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
++ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
++ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
++ * Copyright (c) 2002-2003 TiVo Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include "asix.h"
++
++#define PHY_MODE_MARVELL      0x0000
++#define MII_MARVELL_LED_CTRL  0x0018
++#define MII_MARVELL_STATUS    0x001b
++#define MII_MARVELL_CTRL      0x0014
++
++#define MARVELL_LED_MANUAL    0x0019
++
++#define MARVELL_STATUS_HWCFG  0x0004
++
++#define MARVELL_CTRL_TXDELAY  0x0002
++#define MARVELL_CTRL_RXDELAY  0x0080
++
++#define       PHY_MODE_RTL8211CL      0x000C
++
++struct ax88172_int_data {
++      __le16 res1;
++      u8 link;
++      __le16 res2;
++      u8 status;
++      __le16 res3;
++} __packed;
++
++static void asix_status(struct usbnet *dev, struct urb *urb)
++{
++      struct ax88172_int_data *event;
++      int link;
++
++      if (urb->actual_length < 8)
++              return;
++
++      event = urb->transfer_buffer;
++      link = event->link & 0x01;
++      if (netif_carrier_ok(dev->net) != link) {
++              usbnet_link_change(dev, link, 1);
++              netdev_dbg(dev->net, "Link Status is: %d\n", link);
++      }
++}
++
++static void asix_set_netdev_dev_addr(struct usbnet *dev, u8 *addr)
++{
++      if (is_valid_ether_addr(addr)) {
++              memcpy(dev->net->dev_addr, addr, ETH_ALEN);
++      } else {
++              netdev_info(dev->net, "invalid hw address, using random\n");
++              eth_hw_addr_random(dev->net);
++      }
++}
++
++/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
++static u32 asix_get_phyid(struct usbnet *dev)
++{
++      int phy_reg;
++      u32 phy_id;
++      int i;
++
++      /* Poll for the rare case the FW or phy isn't ready yet.  */
++      for (i = 0; i < 100; i++) {
++              phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
++              if (phy_reg != 0 && phy_reg != 0xFFFF)
++                      break;
++              mdelay(1);
++      }
++
++      if (phy_reg <= 0 || phy_reg == 0xFFFF)
++              return 0;
++
++      phy_id = (phy_reg & 0xffff) << 16;
++
++      phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
++      if (phy_reg < 0)
++              return 0;
++
++      phy_id |= (phy_reg & 0xffff);
++
++      return phy_id;
++}
++
++static u32 asix_get_link(struct net_device *net)
++{
++      struct usbnet *dev = netdev_priv(net);
++
++      return mii_link_ok(&dev->mii);
++}
++
++static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
++{
++      struct usbnet *dev = netdev_priv(net);
++
++      return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
++}
++
++/* We need to override some ethtool_ops so we require our
++   own structure so we don't interfere with other usbnet
++   devices that may be connected at the same time. */
++static const struct ethtool_ops ax88172_ethtool_ops = {
++      .get_drvinfo            = asix_get_drvinfo,
++      .get_link               = asix_get_link,
++      .get_msglevel           = usbnet_get_msglevel,
++      .set_msglevel           = usbnet_set_msglevel,
++      .get_wol                = asix_get_wol,
++      .set_wol                = asix_set_wol,
++      .get_eeprom_len         = asix_get_eeprom_len,
++      .get_eeprom             = asix_get_eeprom,
++      .set_eeprom             = asix_set_eeprom,
++      .get_settings           = usbnet_get_settings,
++      .set_settings           = usbnet_set_settings,
++      .nway_reset             = usbnet_nway_reset,
++};
++
++static void ax88172_set_multicast(struct net_device *net)
++{
++      struct usbnet *dev = netdev_priv(net);
++      struct asix_data *data = (struct asix_data *)&dev->data;
++      u8 rx_ctl = 0x8c;
++
++      if (net->flags & IFF_PROMISC) {
++              rx_ctl |= 0x01;
++      } else if (net->flags & IFF_ALLMULTI ||
++                 netdev_mc_count(net) > AX_MAX_MCAST) {
++              rx_ctl |= 0x02;
++      } else if (netdev_mc_empty(net)) {
++              /* just broadcast and directed */
++      } else {
++              /* We use the 20 byte dev->data
++               * for our 8 byte filter buffer
++               * to avoid allocating memory that
++               * is tricky to free later */
++              struct netdev_hw_addr *ha;
++              u32 crc_bits;
++
++              memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
++
++              /* Build the multicast hash filter. */
++              netdev_for_each_mc_addr(ha, net) {
++                      crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
++                      data->multi_filter[crc_bits >> 3] |=
++                          1 << (crc_bits & 7);
++              }
++
++              asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
++                                 AX_MCAST_FILTER_SIZE, data->multi_filter);
++
++              rx_ctl |= 0x10;
++      }
++
++      asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
++}
++
++static int ax88172_link_reset(struct usbnet *dev)
++{
++      u8 mode;
++      struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
++
++      mii_check_media(&dev->mii, 1, 1);
++      mii_ethtool_gset(&dev->mii, &ecmd);
++      mode = AX88172_MEDIUM_DEFAULT;
++
++      if (ecmd.duplex != DUPLEX_FULL)
++              mode |= ~AX88172_MEDIUM_FD;
++
++      netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
++                 ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
++
++      asix_write_medium_mode(dev, mode);
++
++      return 0;
++}
++
++static const struct net_device_ops ax88172_netdev_ops = {
++      .ndo_open               = usbnet_open,
++      .ndo_stop               = usbnet_stop,
++      .ndo_start_xmit         = usbnet_start_xmit,
++      .ndo_tx_timeout         = usbnet_tx_timeout,
++      .ndo_change_mtu         = usbnet_change_mtu,
++      .ndo_set_mac_address    = eth_mac_addr,
++      .ndo_validate_addr      = eth_validate_addr,
++      .ndo_do_ioctl           = asix_ioctl,
++      .ndo_set_rx_mode        = ax88172_set_multicast,
++};
++
++static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      int ret = 0;
++      u8 buf[ETH_ALEN];
++      int i;
++      unsigned long gpio_bits = dev->driver_info->data;
++
++      usbnet_get_endpoints(dev,intf);
++
++      /* Toggle the GPIOs in a manufacturer/model specific way */
++      for (i = 2; i >= 0; i--) {
++              ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
++                              (gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL);
++              if (ret < 0)
++                      goto out;
++              msleep(5);
++      }
++
++      ret = asix_write_rx_ctl(dev, 0x80);
++      if (ret < 0)
++              goto out;
++
++      /* Get the MAC address */
++      ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
++      if (ret < 0) {
++              netdev_dbg(dev->net, "read AX_CMD_READ_NODE_ID failed: %d\n",
++                         ret);
++              goto out;
++      }
++
++      asix_set_netdev_dev_addr(dev, buf);
++
++      /* Initialize MII structure */
++      dev->mii.dev = dev->net;
++      dev->mii.mdio_read = asix_mdio_read;
++      dev->mii.mdio_write = asix_mdio_write;
++      dev->mii.phy_id_mask = 0x3f;
++      dev->mii.reg_num_mask = 0x1f;
++      dev->mii.phy_id = asix_get_phy_addr(dev);
++
++      dev->net->netdev_ops = &ax88172_netdev_ops;
++      dev->net->ethtool_ops = &ax88172_ethtool_ops;
++      dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
++      dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
++
++      asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
++      asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
++              ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
++      mii_nway_restart(&dev->mii);
++
++      return 0;
++
++out:
++      return ret;
++}
++
++static const struct ethtool_ops ax88772_ethtool_ops = {
++      .get_drvinfo            = asix_get_drvinfo,
++      .get_link               = asix_get_link,
++      .get_msglevel           = usbnet_get_msglevel,
++      .set_msglevel           = usbnet_set_msglevel,
++      .get_wol                = asix_get_wol,
++      .set_wol                = asix_set_wol,
++      .get_eeprom_len         = asix_get_eeprom_len,
++      .get_eeprom             = asix_get_eeprom,
++      .set_eeprom             = asix_set_eeprom,
++      .get_settings           = usbnet_get_settings,
++      .set_settings           = usbnet_set_settings,
++      .nway_reset             = usbnet_nway_reset,
++};
++
++static int ax88772_link_reset(struct usbnet *dev)
++{
++      u16 mode;
++      struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
++
++      mii_check_media(&dev->mii, 1, 1);
++      mii_ethtool_gset(&dev->mii, &ecmd);
++      mode = AX88772_MEDIUM_DEFAULT;
++
++      if (ethtool_cmd_speed(&ecmd) != SPEED_100)
++              mode &= ~AX_MEDIUM_PS;
++
++      if (ecmd.duplex != DUPLEX_FULL)
++              mode &= ~AX_MEDIUM_FD;
++
++      netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
++                 ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
++
++      asix_write_medium_mode(dev, mode);
++
++      return 0;
++}
++
++static int ax88772_reset(struct usbnet *dev)
++{
++      struct asix_data *data = (struct asix_data *)&dev->data;
++      int ret, embd_phy;
++      u16 rx_ctl;
++
++      ret = asix_write_gpio(dev,
++                      AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5);
++      if (ret < 0)
++              goto out;
++
++      embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
++
++      ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
++      if (ret < 0) {
++              netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
++              goto out;
++      }
++
++      ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL);
++      if (ret < 0)
++              goto out;
++
++      msleep(150);
++
++      ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
++      if (ret < 0)
++              goto out;
++
++      msleep(150);
++
++      if (embd_phy) {
++              ret = asix_sw_reset(dev, AX_SWRESET_IPRL);
++              if (ret < 0)
++                      goto out;
++      } else {
++              ret = asix_sw_reset(dev, AX_SWRESET_PRTE);
++              if (ret < 0)
++                      goto out;
++      }
++
++      msleep(150);
++      rx_ctl = asix_read_rx_ctl(dev);
++      netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
++      ret = asix_write_rx_ctl(dev, 0x0000);
++      if (ret < 0)
++              goto out;
++
++      rx_ctl = asix_read_rx_ctl(dev);
++      netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
++
++      ret = asix_sw_reset(dev, AX_SWRESET_PRL);
++      if (ret < 0)
++              goto out;
++
++      msleep(150);
++
++      ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL);
++      if (ret < 0)
++              goto out;
++
++      msleep(150);
++
++      asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
++      asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
++                      ADVERTISE_ALL | ADVERTISE_CSMA);
++      mii_nway_restart(&dev->mii);
++
++      ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT);
++      if (ret < 0)
++              goto out;
++
++      ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
++                              AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
++                              AX88772_IPG2_DEFAULT, 0, NULL);
++      if (ret < 0) {
++              netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
++              goto out;
++      }
++
++      /* Rewrite MAC address */
++      memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
++      ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
++                                                      data->mac_addr);
++      if (ret < 0)
++              goto out;
++
++      /* Set RX_CTL to default values with 2k buffer, and enable cactus */
++      ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
++      if (ret < 0)
++              goto out;
++
++      rx_ctl = asix_read_rx_ctl(dev);
++      netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
++                 rx_ctl);
++
++      rx_ctl = asix_read_medium_status(dev);
++      netdev_dbg(dev->net,
++                 "Medium Status is 0x%04x after all initializations\n",
++                 rx_ctl);
++
++      return 0;
++
++out:
++      return ret;
++
++}
++
++static const struct net_device_ops ax88772_netdev_ops = {
++      .ndo_open               = usbnet_open,
++      .ndo_stop               = usbnet_stop,
++      .ndo_start_xmit         = usbnet_start_xmit,
++      .ndo_tx_timeout         = usbnet_tx_timeout,
++      .ndo_change_mtu         = usbnet_change_mtu,
++      .ndo_set_mac_address    = asix_set_mac_address,
++      .ndo_validate_addr      = eth_validate_addr,
++      .ndo_do_ioctl           = asix_ioctl,
++      .ndo_set_rx_mode        = asix_set_multicast,
++};
++
++static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      int ret, embd_phy, i;
++      u8 buf[ETH_ALEN];
++      u32 phyid;
++
++      usbnet_get_endpoints(dev,intf);
++
++      /* Get the MAC address */
++      if (dev->driver_info->data & FLAG_EEPROM_MAC) {
++              for (i = 0; i < (ETH_ALEN >> 1); i++) {
++                      ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x04 + i,
++                                      0, 2, buf + i * 2);
++                      if (ret < 0)
++                              break;
++              }
++      } else {
++              ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
++                              0, 0, ETH_ALEN, buf);
++      }
++
++      if (ret < 0) {
++              netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
++              return ret;
++      }
++
++      asix_set_netdev_dev_addr(dev, buf);
++
++      /* Initialize MII structure */
++      dev->mii.dev = dev->net;
++      dev->mii.mdio_read = asix_mdio_read;
++      dev->mii.mdio_write = asix_mdio_write;
++      dev->mii.phy_id_mask = 0x1f;
++      dev->mii.reg_num_mask = 0x1f;
++      dev->mii.phy_id = asix_get_phy_addr(dev);
++
++      dev->net->netdev_ops = &ax88772_netdev_ops;
++      dev->net->ethtool_ops = &ax88772_ethtool_ops;
++      dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
++      dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
++
++      embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
++
++      /* Reset the PHY to normal operation mode */
++      ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
++      if (ret < 0) {
++              netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
++              return ret;
++      }
++
++      ax88772_reset(dev);
++
++      /* Read PHYID register *AFTER* the PHY was reset properly */
++      phyid = asix_get_phyid(dev);
++      netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
++
++      /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
++      if (dev->driver_info->flags & FLAG_FRAMING_AX) {
++              /* hard_mtu  is still the default - the device does not support
++                 jumbo eth frames */
++              dev->rx_urb_size = 2048;
++      }
++
++      dev->driver_priv = kzalloc(sizeof(struct asix_common_private), GFP_KERNEL);
++      if (!dev->driver_priv)
++              return -ENOMEM;
++
++      return 0;
++}
++
++static void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf)
++{
++      if (dev->driver_priv)
++              kfree(dev->driver_priv);
++}
++
++static const struct ethtool_ops ax88178_ethtool_ops = {
++      .get_drvinfo            = asix_get_drvinfo,
++      .get_link               = asix_get_link,
++      .get_msglevel           = usbnet_get_msglevel,
++      .set_msglevel           = usbnet_set_msglevel,
++      .get_wol                = asix_get_wol,
++      .set_wol                = asix_set_wol,
++      .get_eeprom_len         = asix_get_eeprom_len,
++      .get_eeprom             = asix_get_eeprom,
++      .set_eeprom             = asix_set_eeprom,
++      .get_settings           = usbnet_get_settings,
++      .set_settings           = usbnet_set_settings,
++      .nway_reset             = usbnet_nway_reset,
++};
++
++static int marvell_phy_init(struct usbnet *dev)
++{
++      struct asix_data *data = (struct asix_data *)&dev->data;
++      u16 reg;
++
++      netdev_dbg(dev->net, "marvell_phy_init()\n");
++
++      reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS);
++      netdev_dbg(dev->net, "MII_MARVELL_STATUS = 0x%04x\n", reg);
++
++      asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL,
++                      MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY);
++
++      if (data->ledmode) {
++              reg = asix_mdio_read(dev->net, dev->mii.phy_id,
++                      MII_MARVELL_LED_CTRL);
++              netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (1) = 0x%04x\n", reg);
++
++              reg &= 0xf8ff;
++              reg |= (1 + 0x0100);
++              asix_mdio_write(dev->net, dev->mii.phy_id,
++                      MII_MARVELL_LED_CTRL, reg);
++
++              reg = asix_mdio_read(dev->net, dev->mii.phy_id,
++                      MII_MARVELL_LED_CTRL);
++              netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (2) = 0x%04x\n", reg);
++              reg &= 0xfc0f;
++      }
++
++      return 0;
++}
++
++static int rtl8211cl_phy_init(struct usbnet *dev)
++{
++      struct asix_data *data = (struct asix_data *)&dev->data;
++
++      netdev_dbg(dev->net, "rtl8211cl_phy_init()\n");
++
++      asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0005);
++      asix_mdio_write (dev->net, dev->mii.phy_id, 0x0c, 0);
++      asix_mdio_write (dev->net, dev->mii.phy_id, 0x01,
++              asix_mdio_read (dev->net, dev->mii.phy_id, 0x01) | 0x0080);
++      asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0);
++
++      if (data->ledmode == 12) {
++              asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0002);
++              asix_mdio_write (dev->net, dev->mii.phy_id, 0x1a, 0x00cb);
++              asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0);
++      }
++
++      return 0;
++}
++
++static int marvell_led_status(struct usbnet *dev, u16 speed)
++{
++      u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL);
++
++      netdev_dbg(dev->net, "marvell_led_status() read 0x%04x\n", reg);
++
++      /* Clear out the center LED bits - 0x03F0 */
++      reg &= 0xfc0f;
++
++      switch (speed) {
++              case SPEED_1000:
++                      reg |= 0x03e0;
++                      break;
++              case SPEED_100:
++                      reg |= 0x03b0;
++                      break;
++              default:
++                      reg |= 0x02f0;
++      }
++
++      netdev_dbg(dev->net, "marvell_led_status() writing 0x%04x\n", reg);
++      asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg);
++
++      return 0;
++}
++
++static int ax88178_reset(struct usbnet *dev)
++{
++      struct asix_data *data = (struct asix_data *)&dev->data;
++      int ret;
++      __le16 eeprom;
++      u8 status;
++      int gpio0 = 0;
++      u32 phyid;
++
++      asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status);
++      netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status);
++
++      asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL);
++      asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom);
++      asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL);
++
++      netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom);
++
++      if (eeprom == cpu_to_le16(0xffff)) {
++              data->phymode = PHY_MODE_MARVELL;
++              data->ledmode = 0;
++              gpio0 = 1;
++      } else {
++              data->phymode = le16_to_cpu(eeprom) & 0x7F;
++              data->ledmode = le16_to_cpu(eeprom) >> 8;
++              gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1;
++      }
++      netdev_dbg(dev->net, "GPIO0: %d, PhyMode: %d\n", gpio0, data->phymode);
++
++      /* Power up external GigaPHY through AX88178 GPIO pin */
++      asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40);
++      if ((le16_to_cpu(eeprom) >> 8) != 1) {
++              asix_write_gpio(dev, 0x003c, 30);
++              asix_write_gpio(dev, 0x001c, 300);
++              asix_write_gpio(dev, 0x003c, 30);
++      } else {
++              netdev_dbg(dev->net, "gpio phymode == 1 path\n");
++              asix_write_gpio(dev, AX_GPIO_GPO1EN, 30);
++              asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30);
++      }
++
++      /* Read PHYID register *AFTER* powering up PHY */
++      phyid = asix_get_phyid(dev);
++      netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
++
++      /* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
++      asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL);
++
++      asix_sw_reset(dev, 0);
++      msleep(150);
++
++      asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
++      msleep(150);
++
++      asix_write_rx_ctl(dev, 0);
++
++      if (data->phymode == PHY_MODE_MARVELL) {
++              marvell_phy_init(dev);
++              msleep(60);
++      } else if (data->phymode == PHY_MODE_RTL8211CL)
++              rtl8211cl_phy_init(dev);
++
++      asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR,
++                      BMCR_RESET | BMCR_ANENABLE);
++      asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
++                      ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
++      asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
++                      ADVERTISE_1000FULL);
++
++      mii_nway_restart(&dev->mii);
++
++      ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT);
++      if (ret < 0)
++              return ret;
++
++      /* Rewrite MAC address */
++      memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
++      ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
++                                                      data->mac_addr);
++      if (ret < 0)
++              return ret;
++
++      ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
++      if (ret < 0)
++              return ret;
++
++      return 0;
++}
++
++static int ax88178_link_reset(struct usbnet *dev)
++{
++      u16 mode;
++      struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
++      struct asix_data *data = (struct asix_data *)&dev->data;
++      u32 speed;
++
++      netdev_dbg(dev->net, "ax88178_link_reset()\n");
++
++      mii_check_media(&dev->mii, 1, 1);
++      mii_ethtool_gset(&dev->mii, &ecmd);
++      mode = AX88178_MEDIUM_DEFAULT;
++      speed = ethtool_cmd_speed(&ecmd);
++
++      if (speed == SPEED_1000)
++              mode |= AX_MEDIUM_GM;
++      else if (speed == SPEED_100)
++              mode |= AX_MEDIUM_PS;
++      else
++              mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
++
++      mode |= AX_MEDIUM_ENCK;
++
++      if (ecmd.duplex == DUPLEX_FULL)
++              mode |= AX_MEDIUM_FD;
++      else
++              mode &= ~AX_MEDIUM_FD;
++
++      netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
++                 speed, ecmd.duplex, mode);
++
++      asix_write_medium_mode(dev, mode);
++
++      if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
++              marvell_led_status(dev, speed);
++
++      return 0;
++}
++
++static void ax88178_set_mfb(struct usbnet *dev)
++{
++      u16 mfb = AX_RX_CTL_MFB_16384;
++      u16 rxctl;
++      u16 medium;
++      int old_rx_urb_size = dev->rx_urb_size;
++
++      if (dev->hard_mtu < 2048) {
++              dev->rx_urb_size = 2048;
++              mfb = AX_RX_CTL_MFB_2048;
++      } else if (dev->hard_mtu < 4096) {
++              dev->rx_urb_size = 4096;
++              mfb = AX_RX_CTL_MFB_4096;
++      } else if (dev->hard_mtu < 8192) {
++              dev->rx_urb_size = 8192;
++              mfb = AX_RX_CTL_MFB_8192;
++      } else if (dev->hard_mtu < 16384) {
++              dev->rx_urb_size = 16384;
++              mfb = AX_RX_CTL_MFB_16384;
++      }
++
++      rxctl = asix_read_rx_ctl(dev);
++      asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb);
++
++      medium = asix_read_medium_status(dev);
++      if (dev->net->mtu > 1500)
++              medium |= AX_MEDIUM_JFE;
++      else
++              medium &= ~AX_MEDIUM_JFE;
++      asix_write_medium_mode(dev, medium);
++
++      if (dev->rx_urb_size > old_rx_urb_size)
++              usbnet_unlink_rx_urbs(dev);
++}
++
++static int ax88178_change_mtu(struct net_device *net, int new_mtu)
++{
++      struct usbnet *dev = netdev_priv(net);
++      int ll_mtu = new_mtu + net->hard_header_len + 4;
++
++      netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu);
++
++      if (new_mtu <= 0 || ll_mtu > 16384)
++              return -EINVAL;
++
++      if ((ll_mtu % dev->maxpacket) == 0)
++              return -EDOM;
++
++      net->mtu = new_mtu;
++      dev->hard_mtu = net->mtu + net->hard_header_len;
++      ax88178_set_mfb(dev);
++
++      /* max qlen depend on hard_mtu and rx_urb_size */
++      usbnet_update_max_qlen(dev);
++
++      return 0;
++}
++
++static const struct net_device_ops ax88178_netdev_ops = {
++      .ndo_open               = usbnet_open,
++      .ndo_stop               = usbnet_stop,
++      .ndo_start_xmit         = usbnet_start_xmit,
++      .ndo_tx_timeout         = usbnet_tx_timeout,
++      .ndo_set_mac_address    = asix_set_mac_address,
++      .ndo_validate_addr      = eth_validate_addr,
++      .ndo_set_rx_mode        = asix_set_multicast,
++      .ndo_do_ioctl           = asix_ioctl,
++      .ndo_change_mtu         = ax88178_change_mtu,
++};
++
++static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      int ret;
++      u8 buf[ETH_ALEN];
++
++      usbnet_get_endpoints(dev,intf);
++
++      /* Get the MAC address */
++      ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
++      if (ret < 0) {
++              netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
++              return ret;
++      }
++
++      asix_set_netdev_dev_addr(dev, buf);
++
++      /* Initialize MII structure */
++      dev->mii.dev = dev->net;
++      dev->mii.mdio_read = asix_mdio_read;
++      dev->mii.mdio_write = asix_mdio_write;
++      dev->mii.phy_id_mask = 0x1f;
++      dev->mii.reg_num_mask = 0xff;
++      dev->mii.supports_gmii = 1;
++      dev->mii.phy_id = asix_get_phy_addr(dev);
++
++      dev->net->netdev_ops = &ax88178_netdev_ops;
++      dev->net->ethtool_ops = &ax88178_ethtool_ops;
++
++      /* Blink LEDS so users know driver saw dongle */
++      asix_sw_reset(dev, 0);
++      msleep(150);
++
++      asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
++      msleep(150);
++
++      /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
++      if (dev->driver_info->flags & FLAG_FRAMING_AX) {
++              /* hard_mtu  is still the default - the device does not support
++                 jumbo eth frames */
++              dev->rx_urb_size = 2048;
++      }
++
++      dev->driver_priv = kzalloc(sizeof(struct asix_common_private), GFP_KERNEL);
++      if (!dev->driver_priv)
++                      return -ENOMEM;
++
++      return 0;
++}
++
++static const struct driver_info ax8817x_info = {
++      .description = "ASIX AX8817x USB 2.0 Ethernet",
++      .bind = ax88172_bind,
++      .status = asix_status,
++      .link_reset = ax88172_link_reset,
++      .reset = ax88172_link_reset,
++      .flags =  FLAG_ETHER | FLAG_LINK_INTR,
++      .data = 0x00130103,
++};
++
++static const struct driver_info dlink_dub_e100_info = {
++      .description = "DLink DUB-E100 USB Ethernet",
++      .bind = ax88172_bind,
++      .status = asix_status,
++      .link_reset = ax88172_link_reset,
++      .reset = ax88172_link_reset,
++      .flags =  FLAG_ETHER | FLAG_LINK_INTR,
++      .data = 0x009f9d9f,
++};
++
++static const struct driver_info netgear_fa120_info = {
++      .description = "Netgear FA-120 USB Ethernet",
++      .bind = ax88172_bind,
++      .status = asix_status,
++      .link_reset = ax88172_link_reset,
++      .reset = ax88172_link_reset,
++      .flags =  FLAG_ETHER | FLAG_LINK_INTR,
++      .data = 0x00130103,
++};
++
++static const struct driver_info hawking_uf200_info = {
++      .description = "Hawking UF200 USB Ethernet",
++      .bind = ax88172_bind,
++      .status = asix_status,
++      .link_reset = ax88172_link_reset,
++      .reset = ax88172_link_reset,
++      .flags =  FLAG_ETHER | FLAG_LINK_INTR,
++      .data = 0x001f1d1f,
++};
++
++static const struct driver_info ax88772_info = {
++      .description = "ASIX AX88772 USB 2.0 Ethernet",
++      .bind = ax88772_bind,
++      .unbind = ax88772_unbind,
++      .status = asix_status,
++      .link_reset = ax88772_link_reset,
++      .reset = ax88772_link_reset,
++      .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
++      .rx_fixup = asix_rx_fixup_common,
++      .tx_fixup = asix_tx_fixup,
++};
++
++static const struct driver_info ax88772b_info = {
++      .description = "ASIX AX88772B USB 2.0 Ethernet",
++      .bind = ax88772_bind,
++      .unbind = ax88772_unbind,
++      .status = asix_status,
++      .link_reset = ax88772_link_reset,
++      .reset = ax88772_reset,
++      .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
++               FLAG_MULTI_PACKET,
++      .rx_fixup = asix_rx_fixup_common,
++      .tx_fixup = asix_tx_fixup,
++      .data = FLAG_EEPROM_MAC,
++};
++
++static const struct driver_info ax88178_info = {
++      .description = "ASIX AX88178 USB 2.0 Ethernet",
++      .bind = ax88178_bind,
++      .unbind = ax88772_unbind,
++      .status = asix_status,
++      .link_reset = ax88178_link_reset,
++      .reset = ax88178_reset,
++      .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
++               FLAG_MULTI_PACKET,
++      .rx_fixup = asix_rx_fixup_common,
++      .tx_fixup = asix_tx_fixup,
++};
++
++/*
++ * USBLINK 20F9 "USB 2.0 LAN" USB ethernet adapter, typically found in
++ * no-name packaging.
++ * USB device strings are:
++ *   1: Manufacturer: USBLINK
++ *   2: Product: HG20F9 USB2.0
++ *   3: Serial: 000003
++ * Appears to be compatible with Asix 88772B.
++ */
++static const struct driver_info hg20f9_info = {
++      .description = "HG20F9 USB 2.0 Ethernet",
++      .bind = ax88772_bind,
++      .unbind = ax88772_unbind,
++      .status = asix_status,
++      .link_reset = ax88772_link_reset,
++      .reset = ax88772_reset,
++      .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
++               FLAG_MULTI_PACKET,
++      .rx_fixup = asix_rx_fixup_common,
++      .tx_fixup = asix_tx_fixup,
++      .data = FLAG_EEPROM_MAC,
++};
++
++static const struct usb_device_id     products [] = {
++{
++      // Linksys USB200M
++      USB_DEVICE (0x077b, 0x2226),
++      .driver_info =  (unsigned long) &ax8817x_info,
++}, {
++      // Netgear FA120
++      USB_DEVICE (0x0846, 0x1040),
++      .driver_info =  (unsigned long) &netgear_fa120_info,
++}, {
++      // DLink DUB-E100
++      USB_DEVICE (0x2001, 0x1a00),
++      .driver_info =  (unsigned long) &dlink_dub_e100_info,
++}, {
++      // Intellinet, ST Lab USB Ethernet
++      USB_DEVICE (0x0b95, 0x1720),
++      .driver_info =  (unsigned long) &ax8817x_info,
++}, {
++      // Hawking UF200, TrendNet TU2-ET100
++      USB_DEVICE (0x07b8, 0x420a),
++      .driver_info =  (unsigned long) &hawking_uf200_info,
++}, {
++      // Billionton Systems, USB2AR
++      USB_DEVICE (0x08dd, 0x90ff),
++      .driver_info =  (unsigned long) &ax8817x_info,
++}, {
++      // ATEN UC210T
++      USB_DEVICE (0x0557, 0x2009),
++      .driver_info =  (unsigned long) &ax8817x_info,
++}, {
++      // Buffalo LUA-U2-KTX
++      USB_DEVICE (0x0411, 0x003d),
++      .driver_info =  (unsigned long) &ax8817x_info,
++}, {
++      // Buffalo LUA-U2-GT 10/100/1000
++      USB_DEVICE (0x0411, 0x006e),
++      .driver_info =  (unsigned long) &ax88178_info,
++}, {
++      // Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter"
++      USB_DEVICE (0x6189, 0x182d),
++      .driver_info =  (unsigned long) &ax8817x_info,
++}, {
++      // Sitecom LN-031 "USB 2.0 10/100/1000 Ethernet adapter"
++      USB_DEVICE (0x0df6, 0x0056),
++      .driver_info =  (unsigned long) &ax88178_info,
++}, {
++      // corega FEther USB2-TX
++      USB_DEVICE (0x07aa, 0x0017),
++      .driver_info =  (unsigned long) &ax8817x_info,
++}, {
++      // Surecom EP-1427X-2
++      USB_DEVICE (0x1189, 0x0893),
++      .driver_info = (unsigned long) &ax8817x_info,
++}, {
++      // goodway corp usb gwusb2e
++      USB_DEVICE (0x1631, 0x6200),
++      .driver_info = (unsigned long) &ax8817x_info,
++}, {
++      // JVC MP-PRX1 Port Replicator
++      USB_DEVICE (0x04f1, 0x3008),
++      .driver_info = (unsigned long) &ax8817x_info,
++}, {
++      // Lenovo U2L100P 10/100
++      USB_DEVICE (0x17ef, 0x7203),
++      .driver_info = (unsigned long) &ax88772_info,
++}, {
++      // ASIX AX88772B 10/100
++      USB_DEVICE (0x0b95, 0x772b),
++      .driver_info = (unsigned long) &ax88772b_info,
++}, {
++      // ASIX AX88772 10/100
++      USB_DEVICE (0x0b95, 0x7720),
++      .driver_info = (unsigned long) &ax88772_info,
++}, {
++      // ASIX AX88178 10/100/1000
++      USB_DEVICE (0x0b95, 0x1780),
++      .driver_info = (unsigned long) &ax88178_info,
++}, {
++      // Logitec LAN-GTJ/U2A
++      USB_DEVICE (0x0789, 0x0160),
++      .driver_info = (unsigned long) &ax88178_info,
++}, {
++      // Linksys USB200M Rev 2
++      USB_DEVICE (0x13b1, 0x0018),
++      .driver_info = (unsigned long) &ax88772_info,
++}, {
++      // 0Q0 cable ethernet
++      USB_DEVICE (0x1557, 0x7720),
++      .driver_info = (unsigned long) &ax88772_info,
++}, {
++      // DLink DUB-E100 H/W Ver B1
++      USB_DEVICE (0x07d1, 0x3c05),
++      .driver_info = (unsigned long) &ax88772_info,
++}, {
++      // DLink DUB-E100 H/W Ver B1 Alternate
++      USB_DEVICE (0x2001, 0x3c05),
++      .driver_info = (unsigned long) &ax88772_info,
++}, {
++       // DLink DUB-E100 H/W Ver C1
++       USB_DEVICE (0x2001, 0x1a02),
++       .driver_info = (unsigned long) &ax88772_info,
++}, {
++      // Linksys USB1000
++      USB_DEVICE (0x1737, 0x0039),
++      .driver_info = (unsigned long) &ax88178_info,
++}, {
++      // IO-DATA ETG-US2
++      USB_DEVICE (0x04bb, 0x0930),
++      .driver_info = (unsigned long) &ax88178_info,
++}, {
++      // Belkin F5D5055
++      USB_DEVICE(0x050d, 0x5055),
++      .driver_info = (unsigned long) &ax88178_info,
++}, {
++      // Apple USB Ethernet Adapter
++      USB_DEVICE(0x05ac, 0x1402),
++      .driver_info = (unsigned long) &ax88772_info,
++}, {
++      // Cables-to-Go USB Ethernet Adapter
++      USB_DEVICE(0x0b95, 0x772a),
++      .driver_info = (unsigned long) &ax88772_info,
++}, {
++      // ABOCOM for pci
++      USB_DEVICE(0x14ea, 0xab11),
++      .driver_info = (unsigned long) &ax88178_info,
++}, {
++      // ASIX 88772a
++      USB_DEVICE(0x0db0, 0xa877),
++      .driver_info = (unsigned long) &ax88772_info,
++}, {
++      // Asus USB Ethernet Adapter
++      USB_DEVICE (0x0b95, 0x7e2b),
++      .driver_info = (unsigned long) &ax88772_info,
++}, {
++      /* ASIX 88172a demo board */
++      USB_DEVICE(0x0b95, 0x172a),
++      .driver_info = (unsigned long) &ax88172a_info,
++}, {
++      /*
++       * USBLINK HG20F9 "USB 2.0 LAN"
++       * Appears to have gazumped Linksys's manufacturer ID but
++       * doesn't (yet) conflict with any known Linksys product.
++       */
++      USB_DEVICE(0x066b, 0x20f9),
++      .driver_info = (unsigned long) &hg20f9_info,
++},
++      { },            // END
++};
++MODULE_DEVICE_TABLE(usb, products);
++
++static struct usb_driver asix_driver = {
++      .name =         DRIVER_NAME,
++      .id_table =     products,
++      .probe =        usbnet_probe,
++      .suspend =      usbnet_suspend,
++      .resume =       usbnet_resume,
++      .disconnect =   usbnet_disconnect,
++      .supports_autosuspend = 1,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(asix_driver);
++
++MODULE_AUTHOR("David Hollis");
++MODULE_VERSION(DRIVER_VERSION);
++MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices");
++MODULE_LICENSE("GPL");
++
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/asix.h backports-3.18.1-1/drivers/net/usb/asix.h
+--- backports-3.18.1-1.org/drivers/net/usb/asix.h      1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/asix.h  2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,234 @@
++/*
++ * ASIX AX8817X based USB 2.0 Ethernet Devices
++ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
++ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
++ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
++ * Copyright (c) 2002-2003 TiVo Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ */
++
++#ifndef _ASIX_H
++#define _ASIX_H
++
++// #define    DEBUG                   // error path messages, extra info
++// #define    VERBOSE                 // more; success messages
++
++#include <linux/module.h>
++#include <linux/kmod.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/workqueue.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/crc32.h>
++#include <linux/usb/usbnet.h>
++#include <linux/slab.h>
++#include <linux/if_vlan.h>
++
++#define DRIVER_VERSION "22-Dec-2011"
++#define DRIVER_NAME "asix"
++
++/* ASIX AX8817X based USB 2.0 Ethernet Devices */
++
++#define AX_CMD_SET_SW_MII             0x06
++#define AX_CMD_READ_MII_REG           0x07
++#define AX_CMD_WRITE_MII_REG          0x08
++#define AX_CMD_SET_HW_MII             0x0a
++#define AX_CMD_READ_EEPROM            0x0b
++#define AX_CMD_WRITE_EEPROM           0x0c
++#define AX_CMD_WRITE_ENABLE           0x0d
++#define AX_CMD_WRITE_DISABLE          0x0e
++#define AX_CMD_READ_RX_CTL            0x0f
++#define AX_CMD_WRITE_RX_CTL           0x10
++#define AX_CMD_READ_IPG012            0x11
++#define AX_CMD_WRITE_IPG0             0x12
++#define AX_CMD_WRITE_IPG1             0x13
++#define AX_CMD_READ_NODE_ID           0x13
++#define AX_CMD_WRITE_NODE_ID          0x14
++#define AX_CMD_WRITE_IPG2             0x14
++#define AX_CMD_WRITE_MULTI_FILTER     0x16
++#define AX88172_CMD_READ_NODE_ID      0x17
++#define AX_CMD_READ_PHY_ID            0x19
++#define AX_CMD_READ_MEDIUM_STATUS     0x1a
++#define AX_CMD_WRITE_MEDIUM_MODE      0x1b
++#define AX_CMD_READ_MONITOR_MODE      0x1c
++#define AX_CMD_WRITE_MONITOR_MODE     0x1d
++#define AX_CMD_READ_GPIOS             0x1e
++#define AX_CMD_WRITE_GPIOS            0x1f
++#define AX_CMD_SW_RESET                       0x20
++#define AX_CMD_SW_PHY_STATUS          0x21
++#define AX_CMD_SW_PHY_SELECT          0x22
++
++#define AX_PHY_SELECT_MASK            (BIT(3) | BIT(2))
++#define AX_PHY_SELECT_INTERNAL                0
++#define AX_PHY_SELECT_EXTERNAL                BIT(2)
++
++#define AX_MONITOR_MODE                       0x01
++#define AX_MONITOR_LINK                       0x02
++#define AX_MONITOR_MAGIC              0x04
++#define AX_MONITOR_HSFS                       0x10
++
++/* AX88172 Medium Status Register values */
++#define AX88172_MEDIUM_FD             0x02
++#define AX88172_MEDIUM_TX             0x04
++#define AX88172_MEDIUM_FC             0x10
++#define AX88172_MEDIUM_DEFAULT \
++              ( AX88172_MEDIUM_FD | AX88172_MEDIUM_TX | AX88172_MEDIUM_FC )
++
++#define AX_MCAST_FILTER_SIZE          8
++#define AX_MAX_MCAST                  64
++
++#define AX_SWRESET_CLEAR              0x00
++#define AX_SWRESET_RR                 0x01
++#define AX_SWRESET_RT                 0x02
++#define AX_SWRESET_PRTE                       0x04
++#define AX_SWRESET_PRL                        0x08
++#define AX_SWRESET_BZ                 0x10
++#define AX_SWRESET_IPRL                       0x20
++#define AX_SWRESET_IPPD                       0x40
++
++#define AX88772_IPG0_DEFAULT          0x15
++#define AX88772_IPG1_DEFAULT          0x0c
++#define AX88772_IPG2_DEFAULT          0x12
++
++/* AX88772 & AX88178 Medium Mode Register */
++#define AX_MEDIUM_PF          0x0080
++#define AX_MEDIUM_JFE         0x0040
++#define AX_MEDIUM_TFC         0x0020
++#define AX_MEDIUM_RFC         0x0010
++#define AX_MEDIUM_ENCK                0x0008
++#define AX_MEDIUM_AC          0x0004
++#define AX_MEDIUM_FD          0x0002
++#define AX_MEDIUM_GM          0x0001
++#define AX_MEDIUM_SM          0x1000
++#define AX_MEDIUM_SBP         0x0800
++#define AX_MEDIUM_PS          0x0200
++#define AX_MEDIUM_RE          0x0100
++
++#define AX88178_MEDIUM_DEFAULT        \
++      (AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \
++       AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \
++       AX_MEDIUM_RE)
++
++#define AX88772_MEDIUM_DEFAULT        \
++      (AX_MEDIUM_FD | AX_MEDIUM_RFC | \
++       AX_MEDIUM_TFC | AX_MEDIUM_PS | \
++       AX_MEDIUM_AC | AX_MEDIUM_RE)
++
++/* AX88772 & AX88178 RX_CTL values */
++#define AX_RX_CTL_SO          0x0080
++#define AX_RX_CTL_AP          0x0020
++#define AX_RX_CTL_AM          0x0010
++#define AX_RX_CTL_AB          0x0008
++#define AX_RX_CTL_SEP         0x0004
++#define AX_RX_CTL_AMALL               0x0002
++#define AX_RX_CTL_PRO         0x0001
++#define AX_RX_CTL_MFB_2048    0x0000
++#define AX_RX_CTL_MFB_4096    0x0100
++#define AX_RX_CTL_MFB_8192    0x0200
++#define AX_RX_CTL_MFB_16384   0x0300
++
++#define AX_DEFAULT_RX_CTL     (AX_RX_CTL_SO | AX_RX_CTL_AB)
++
++/* GPIO 0 .. 2 toggles */
++#define AX_GPIO_GPO0EN                0x01    /* GPIO0 Output enable */
++#define AX_GPIO_GPO_0         0x02    /* GPIO0 Output value */
++#define AX_GPIO_GPO1EN                0x04    /* GPIO1 Output enable */
++#define AX_GPIO_GPO_1         0x08    /* GPIO1 Output value */
++#define AX_GPIO_GPO2EN                0x10    /* GPIO2 Output enable */
++#define AX_GPIO_GPO_2         0x20    /* GPIO2 Output value */
++#define AX_GPIO_RESERVED      0x40    /* Reserved */
++#define AX_GPIO_RSE           0x80    /* Reload serial EEPROM */
++
++#define AX_EEPROM_MAGIC               0xdeadbeef
++#define AX_EEPROM_LEN         0x200
++
++/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
++struct asix_data {
++      u8 multi_filter[AX_MCAST_FILTER_SIZE];
++      u8 mac_addr[ETH_ALEN];
++      u8 phymode;
++      u8 ledmode;
++      u8 res;
++};
++
++struct asix_rx_fixup_info {
++      struct sk_buff *ax_skb;
++      u32 header;
++      u16 size;
++      bool split_head;
++};
++
++struct asix_common_private {
++      struct asix_rx_fixup_info rx_fixup_info;
++};
++
++extern const struct driver_info ax88172a_info;
++
++/* ASIX specific flags */
++#define FLAG_EEPROM_MAC               (1UL << 0)  /* init device MAC from eeprom */
++
++int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
++                u16 size, void *data);
++
++int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
++                 u16 size, void *data);
++
++void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value,
++                        u16 index, u16 size, void *data);
++
++int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb,
++                         struct asix_rx_fixup_info *rx);
++int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb);
++
++struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
++                            gfp_t flags);
++
++int asix_set_sw_mii(struct usbnet *dev);
++int asix_set_hw_mii(struct usbnet *dev);
++
++int asix_read_phy_addr(struct usbnet *dev, int internal);
++int asix_get_phy_addr(struct usbnet *dev);
++
++int asix_sw_reset(struct usbnet *dev, u8 flags);
++
++u16 asix_read_rx_ctl(struct usbnet *dev);
++int asix_write_rx_ctl(struct usbnet *dev, u16 mode);
++
++u16 asix_read_medium_status(struct usbnet *dev);
++int asix_write_medium_mode(struct usbnet *dev, u16 mode);
++
++int asix_write_gpio(struct usbnet *dev, u16 value, int sleep);
++
++void asix_set_multicast(struct net_device *net);
++
++int asix_mdio_read(struct net_device *netdev, int phy_id, int loc);
++void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val);
++
++void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
++int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
++
++int asix_get_eeprom_len(struct net_device *net);
++int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
++                  u8 *data);
++int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
++                  u8 *data);
++
++void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info);
++
++int asix_set_mac_address(struct net_device *net, void *p);
++
++#endif /* _ASIX_H */
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/ax88172a.c backports-3.18.1-1/drivers/net/usb/ax88172a.c
+--- backports-3.18.1-1.org/drivers/net/usb/ax88172a.c  1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/ax88172a.c      2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,422 @@
++/*
++ * ASIX AX88172A based USB 2.0 Ethernet Devices
++ * Copyright (C) 2012 OMICRON electronics GmbH
++ *
++ * Supports external PHYs via phylib. Based on the driver for the
++ * AX88772. Original copyrights follow:
++ *
++ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
++ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
++ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
++ * Copyright (c) 2002-2003 TiVo Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include "asix.h"
++#include <linux/phy.h>
++
++struct ax88172a_private {
++      struct mii_bus *mdio;
++      struct phy_device *phydev;
++      char phy_name[20];
++      u16 phy_addr;
++      u16 oldmode;
++      int use_embdphy;
++      struct asix_rx_fixup_info rx_fixup_info;
++};
++
++/* MDIO read and write wrappers for phylib */
++static int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum)
++{
++      return asix_mdio_read(((struct usbnet *)bus->priv)->net, phy_id,
++                            regnum);
++}
++
++static int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum,
++                             u16 val)
++{
++      asix_mdio_write(((struct usbnet *)bus->priv)->net, phy_id, regnum, val);
++      return 0;
++}
++
++static int ax88172a_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
++{
++      if (!netif_running(net))
++              return -EINVAL;
++
++      if (!net->phydev)
++              return -ENODEV;
++
++      return phy_mii_ioctl(net->phydev, rq, cmd);
++}
++
++/* set MAC link settings according to information from phylib */
++static void ax88172a_adjust_link(struct net_device *netdev)
++{
++      struct phy_device *phydev = netdev->phydev;
++      struct usbnet *dev = netdev_priv(netdev);
++      struct ax88172a_private *priv = dev->driver_priv;
++      u16 mode = 0;
++
++      if (phydev->link) {
++              mode = AX88772_MEDIUM_DEFAULT;
++
++              if (phydev->duplex == DUPLEX_HALF)
++                      mode &= ~AX_MEDIUM_FD;
++
++              if (phydev->speed != SPEED_100)
++                      mode &= ~AX_MEDIUM_PS;
++      }
++
++      if (mode != priv->oldmode) {
++              asix_write_medium_mode(dev, mode);
++              priv->oldmode = mode;
++              netdev_dbg(netdev, "speed %u duplex %d, setting mode to 0x%04x\n",
++                         phydev->speed, phydev->duplex, mode);
++              phy_print_status(phydev);
++      }
++}
++
++static void ax88172a_status(struct usbnet *dev, struct urb *urb)
++{
++      /* link changes are detected by polling the phy */
++}
++
++/* use phylib infrastructure */
++static int ax88172a_init_mdio(struct usbnet *dev)
++{
++      struct ax88172a_private *priv = dev->driver_priv;
++      int ret, i;
++
++      priv->mdio = mdiobus_alloc();
++      if (!priv->mdio) {
++              netdev_err(dev->net, "Could not allocate MDIO bus\n");
++              return -ENOMEM;
++      }
++
++      priv->mdio->priv = (void *)dev;
++      priv->mdio->read = &asix_mdio_bus_read;
++      priv->mdio->write = &asix_mdio_bus_write;
++      priv->mdio->name = "Asix MDIO Bus";
++      /* mii bus name is usb-<usb bus number>-<usb device number> */
++      snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
++               dev->udev->bus->busnum, dev->udev->devnum);
++
++      priv->mdio->irq = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
++      if (!priv->mdio->irq) {
++              ret = -ENOMEM;
++              goto mfree;
++      }
++      for (i = 0; i < PHY_MAX_ADDR; i++)
++              priv->mdio->irq[i] = PHY_POLL;
++
++      ret = mdiobus_register(priv->mdio);
++      if (ret) {
++              netdev_err(dev->net, "Could not register MDIO bus\n");
++              goto ifree;
++      }
++
++      netdev_info(dev->net, "registered mdio bus %s\n", priv->mdio->id);
++      return 0;
++
++ifree:
++      kfree(priv->mdio->irq);
++mfree:
++      mdiobus_free(priv->mdio);
++      return ret;
++}
++
++static void ax88172a_remove_mdio(struct usbnet *dev)
++{
++      struct ax88172a_private *priv = dev->driver_priv;
++
++      netdev_info(dev->net, "deregistering mdio bus %s\n", priv->mdio->id);
++      mdiobus_unregister(priv->mdio);
++      kfree(priv->mdio->irq);
++      mdiobus_free(priv->mdio);
++}
++
++static const struct net_device_ops ax88172a_netdev_ops = {
++      .ndo_open               = usbnet_open,
++      .ndo_stop               = usbnet_stop,
++      .ndo_start_xmit         = usbnet_start_xmit,
++      .ndo_tx_timeout         = usbnet_tx_timeout,
++      .ndo_change_mtu         = usbnet_change_mtu,
++      .ndo_set_mac_address    = asix_set_mac_address,
++      .ndo_validate_addr      = eth_validate_addr,
++      .ndo_do_ioctl           = ax88172a_ioctl,
++      .ndo_set_rx_mode        = asix_set_multicast,
++};
++
++static int ax88172a_get_settings(struct net_device *net,
++                               struct ethtool_cmd *cmd)
++{
++      if (!net->phydev)
++              return -ENODEV;
++
++      return phy_ethtool_gset(net->phydev, cmd);
++}
++
++static int ax88172a_set_settings(struct net_device *net,
++                               struct ethtool_cmd *cmd)
++{
++      if (!net->phydev)
++              return -ENODEV;
++
++      return phy_ethtool_sset(net->phydev, cmd);
++}
++
++static int ax88172a_nway_reset(struct net_device *net)
++{
++      if (!net->phydev)
++              return -ENODEV;
++
++      return phy_start_aneg(net->phydev);
++}
++
++static const struct ethtool_ops ax88172a_ethtool_ops = {
++      .get_drvinfo            = asix_get_drvinfo,
++      .get_link               = usbnet_get_link,
++      .get_msglevel           = usbnet_get_msglevel,
++      .set_msglevel           = usbnet_set_msglevel,
++      .get_wol                = asix_get_wol,
++      .set_wol                = asix_set_wol,
++      .get_eeprom_len         = asix_get_eeprom_len,
++      .get_eeprom             = asix_get_eeprom,
++      .set_eeprom             = asix_set_eeprom,
++      .get_settings           = ax88172a_get_settings,
++      .set_settings           = ax88172a_set_settings,
++      .nway_reset             = ax88172a_nway_reset,
++};
++
++static int ax88172a_reset_phy(struct usbnet *dev, int embd_phy)
++{
++      int ret;
++
++      ret = asix_sw_reset(dev, AX_SWRESET_IPPD);
++      if (ret < 0)
++              goto err;
++
++      msleep(150);
++      ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
++      if (ret < 0)
++              goto err;
++
++      msleep(150);
++
++      ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD);
++      if (ret < 0)
++              goto err;
++
++      return 0;
++
++err:
++      return ret;
++}
++
++
++static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      int ret;
++      u8 buf[ETH_ALEN];
++      struct ax88172a_private *priv;
++
++      usbnet_get_endpoints(dev, intf);
++
++      priv = kzalloc(sizeof(*priv), GFP_KERNEL);
++      if (!priv)
++              return -ENOMEM;
++
++      dev->driver_priv = priv;
++
++      /* Get the MAC address */
++      ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
++      if (ret < 0) {
++              netdev_err(dev->net, "Failed to read MAC address: %d\n", ret);
++              goto free;
++      }
++      memcpy(dev->net->dev_addr, buf, ETH_ALEN);
++
++      dev->net->netdev_ops = &ax88172a_netdev_ops;
++      dev->net->ethtool_ops = &ax88172a_ethtool_ops;
++
++      /* are we using the internal or the external phy? */
++      ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf);
++      if (ret < 0) {
++              netdev_err(dev->net, "Failed to read software interface selection register: %d\n",
++                         ret);
++              goto free;
++      }
++
++      netdev_dbg(dev->net, "AX_CMD_SW_PHY_STATUS = 0x%02x\n", buf[0]);
++      switch (buf[0] & AX_PHY_SELECT_MASK) {
++      case AX_PHY_SELECT_INTERNAL:
++              netdev_dbg(dev->net, "use internal phy\n");
++              priv->use_embdphy = 1;
++              break;
++      case AX_PHY_SELECT_EXTERNAL:
++              netdev_dbg(dev->net, "use external phy\n");
++              priv->use_embdphy = 0;
++              break;
++      default:
++              netdev_err(dev->net, "Interface mode not supported by driver\n");
++              ret = -ENOTSUPP;
++              goto free;
++      }
++
++      priv->phy_addr = asix_read_phy_addr(dev, priv->use_embdphy);
++      ax88172a_reset_phy(dev, priv->use_embdphy);
++
++      /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
++      if (dev->driver_info->flags & FLAG_FRAMING_AX) {
++              /* hard_mtu  is still the default - the device does not support
++                 jumbo eth frames */
++              dev->rx_urb_size = 2048;
++      }
++
++      /* init MDIO bus */
++      ret = ax88172a_init_mdio(dev);
++      if (ret)
++              goto free;
++
++      return 0;
++
++free:
++      kfree(priv);
++      return ret;
++}
++
++static int ax88172a_stop(struct usbnet *dev)
++{
++      struct ax88172a_private *priv = dev->driver_priv;
++
++      netdev_dbg(dev->net, "Stopping interface\n");
++
++      if (priv->phydev) {
++              netdev_info(dev->net, "Disconnecting from phy %s\n",
++                          priv->phy_name);
++              phy_stop(priv->phydev);
++              phy_disconnect(priv->phydev);
++      }
++
++      return 0;
++}
++
++static void ax88172a_unbind(struct usbnet *dev, struct usb_interface *intf)
++{
++      struct ax88172a_private *priv = dev->driver_priv;
++
++      ax88172a_remove_mdio(dev);
++      kfree(priv);
++}
++
++static int ax88172a_reset(struct usbnet *dev)
++{
++      struct asix_data *data = (struct asix_data *)&dev->data;
++      struct ax88172a_private *priv = dev->driver_priv;
++      int ret;
++      u16 rx_ctl;
++
++      ax88172a_reset_phy(dev, priv->use_embdphy);
++
++      msleep(150);
++      rx_ctl = asix_read_rx_ctl(dev);
++      netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
++      ret = asix_write_rx_ctl(dev, 0x0000);
++      if (ret < 0)
++              goto out;
++
++      rx_ctl = asix_read_rx_ctl(dev);
++      netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
++
++      msleep(150);
++
++      ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
++                           AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
++                           AX88772_IPG2_DEFAULT, 0, NULL);
++      if (ret < 0) {
++              netdev_err(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
++              goto out;
++      }
++
++      /* Rewrite MAC address */
++      memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
++      ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
++                           data->mac_addr);
++      if (ret < 0)
++              goto out;
++
++      /* Set RX_CTL to default values with 2k buffer, and enable cactus */
++      ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
++      if (ret < 0)
++              goto out;
++
++      rx_ctl = asix_read_rx_ctl(dev);
++      netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
++                 rx_ctl);
++
++      rx_ctl = asix_read_medium_status(dev);
++      netdev_dbg(dev->net, "Medium Status is 0x%04x after all initializations\n",
++                 rx_ctl);
++
++      /* Connect to PHY */
++      snprintf(priv->phy_name, 20, PHY_ID_FMT,
++               priv->mdio->id, priv->phy_addr);
++
++      priv->phydev = phy_connect(dev->net, priv->phy_name,
++                                 &ax88172a_adjust_link,
++                                 PHY_INTERFACE_MODE_MII);
++      if (IS_ERR(priv->phydev)) {
++              netdev_err(dev->net, "Could not connect to PHY device %s\n",
++                         priv->phy_name);
++              ret = PTR_ERR(priv->phydev);
++              goto out;
++      }
++
++      netdev_info(dev->net, "Connected to phy %s\n", priv->phy_name);
++
++      /* During power-up, the AX88172A set the power down (BMCR_PDOWN)
++       * bit of the PHY. Bring the PHY up again.
++       */
++      genphy_resume(priv->phydev);
++      phy_start(priv->phydev);
++
++      return 0;
++
++out:
++      return ret;
++
++}
++
++static int ax88172a_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
++{
++      struct ax88172a_private *dp = dev->driver_priv;
++      struct asix_rx_fixup_info *rx = &dp->rx_fixup_info;
++
++      return asix_rx_fixup_internal(dev, skb, rx);
++}
++
++const struct driver_info ax88172a_info = {
++      .description = "ASIX AX88172A USB 2.0 Ethernet",
++      .bind = ax88172a_bind,
++      .reset = ax88172a_reset,
++      .stop = ax88172a_stop,
++      .unbind = ax88172a_unbind,
++      .status = ax88172a_status,
++      .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
++               FLAG_MULTI_PACKET,
++      .rx_fixup = ax88172a_rx_fixup,
++      .tx_fixup = asix_tx_fixup,
++};
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/ax88179_178a.c backports-3.18.1-1/drivers/net/usb/ax88179_178a.c
+--- backports-3.18.1-1.org/drivers/net/usb/ax88179_178a.c      1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/ax88179_178a.c  2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,1756 @@
++/*
++ * ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet Devices
++ *
++ * Copyright (C) 2011-2013 ASIX
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/module.h>
++#include <linux/etherdevice.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/crc32.h>
++#include <linux/usb/usbnet.h>
++#include <uapi/linux/mdio.h>
++#include <linux/mdio.h>
++
++#define AX88179_PHY_ID                                0x03
++#define AX_EEPROM_LEN                         0x100
++#define AX88179_EEPROM_MAGIC                  0x17900b95
++#define AX_MCAST_FLTSIZE                      8
++#define AX_MAX_MCAST                          64
++#define AX_INT_PPLS_LINK                      ((u32)BIT(16))
++#define AX_RXHDR_L4_TYPE_MASK                 0x1c
++#define AX_RXHDR_L4_TYPE_UDP                  4
++#define AX_RXHDR_L4_TYPE_TCP                  16
++#define AX_RXHDR_L3CSUM_ERR                   2
++#define AX_RXHDR_L4CSUM_ERR                   1
++#define AX_RXHDR_CRC_ERR                      ((u32)BIT(29))
++#define AX_RXHDR_DROP_ERR                     ((u32)BIT(31))
++#define AX_ACCESS_MAC                         0x01
++#define AX_ACCESS_PHY                         0x02
++#define AX_ACCESS_EEPROM                      0x04
++#define AX_ACCESS_EFUS                                0x05
++#define AX_PAUSE_WATERLVL_HIGH                        0x54
++#define AX_PAUSE_WATERLVL_LOW                 0x55
++
++#define PHYSICAL_LINK_STATUS                  0x02
++      #define AX_USB_SS               0x04
++      #define AX_USB_HS               0x02
++
++#define GENERAL_STATUS                                0x03
++/* Check AX88179 version. UA1:Bit2 = 0,  UA2:Bit2 = 1 */
++      #define AX_SECLD                0x04
++
++#define AX_SROM_ADDR                          0x07
++#define AX_SROM_CMD                           0x0a
++      #define EEP_RD                  0x04
++      #define EEP_BUSY                0x10
++
++#define AX_SROM_DATA_LOW                      0x08
++#define AX_SROM_DATA_HIGH                     0x09
++
++#define AX_RX_CTL                             0x0b
++      #define AX_RX_CTL_DROPCRCERR    0x0100
++      #define AX_RX_CTL_IPE           0x0200
++      #define AX_RX_CTL_START         0x0080
++      #define AX_RX_CTL_AP            0x0020
++      #define AX_RX_CTL_AM            0x0010
++      #define AX_RX_CTL_AB            0x0008
++      #define AX_RX_CTL_AMALL         0x0002
++      #define AX_RX_CTL_PRO           0x0001
++      #define AX_RX_CTL_STOP          0x0000
++
++#define AX_NODE_ID                            0x10
++#define AX_MULFLTARY                          0x16
++
++#define AX_MEDIUM_STATUS_MODE                 0x22
++      #define AX_MEDIUM_GIGAMODE      0x01
++      #define AX_MEDIUM_FULL_DUPLEX   0x02
++      #define AX_MEDIUM_EN_125MHZ     0x08
++      #define AX_MEDIUM_RXFLOW_CTRLEN 0x10
++      #define AX_MEDIUM_TXFLOW_CTRLEN 0x20
++      #define AX_MEDIUM_RECEIVE_EN    0x100
++      #define AX_MEDIUM_PS            0x200
++      #define AX_MEDIUM_JUMBO_EN      0x8040
++
++#define AX_MONITOR_MOD                                0x24
++      #define AX_MONITOR_MODE_RWLC    0x02
++      #define AX_MONITOR_MODE_RWMP    0x04
++      #define AX_MONITOR_MODE_PMEPOL  0x20
++      #define AX_MONITOR_MODE_PMETYPE 0x40
++
++#define AX_GPIO_CTRL                          0x25
++      #define AX_GPIO_CTRL_GPIO3EN    0x80
++      #define AX_GPIO_CTRL_GPIO2EN    0x40
++      #define AX_GPIO_CTRL_GPIO1EN    0x20
++
++#define AX_PHYPWR_RSTCTL                      0x26
++      #define AX_PHYPWR_RSTCTL_BZ     0x0010
++      #define AX_PHYPWR_RSTCTL_IPRL   0x0020
++      #define AX_PHYPWR_RSTCTL_AT     0x1000
++
++#define AX_RX_BULKIN_QCTRL                    0x2e
++#define AX_CLK_SELECT                         0x33
++      #define AX_CLK_SELECT_BCS       0x01
++      #define AX_CLK_SELECT_ACS       0x02
++      #define AX_CLK_SELECT_ULR       0x08
++
++#define AX_RXCOE_CTL                          0x34
++      #define AX_RXCOE_IP             0x01
++      #define AX_RXCOE_TCP            0x02
++      #define AX_RXCOE_UDP            0x04
++      #define AX_RXCOE_TCPV6          0x20
++      #define AX_RXCOE_UDPV6          0x40
++
++#define AX_TXCOE_CTL                          0x35
++      #define AX_TXCOE_IP             0x01
++      #define AX_TXCOE_TCP            0x02
++      #define AX_TXCOE_UDP            0x04
++      #define AX_TXCOE_TCPV6          0x20
++      #define AX_TXCOE_UDPV6          0x40
++
++#define AX_LEDCTRL                            0x73
++
++#define GMII_PHY_PHYSR                                0x11
++      #define GMII_PHY_PHYSR_SMASK    0xc000
++      #define GMII_PHY_PHYSR_GIGA     0x8000
++      #define GMII_PHY_PHYSR_100      0x4000
++      #define GMII_PHY_PHYSR_FULL     0x2000
++      #define GMII_PHY_PHYSR_LINK     0x400
++
++#define GMII_LED_ACT                          0x1a
++      #define GMII_LED_ACTIVE_MASK    0xff8f
++      #define GMII_LED0_ACTIVE        BIT(4)
++      #define GMII_LED1_ACTIVE        BIT(5)
++      #define GMII_LED2_ACTIVE        BIT(6)
++
++#define GMII_LED_LINK                         0x1c
++      #define GMII_LED_LINK_MASK      0xf888
++      #define GMII_LED0_LINK_10       BIT(0)
++      #define GMII_LED0_LINK_100      BIT(1)
++      #define GMII_LED0_LINK_1000     BIT(2)
++      #define GMII_LED1_LINK_10       BIT(4)
++      #define GMII_LED1_LINK_100      BIT(5)
++      #define GMII_LED1_LINK_1000     BIT(6)
++      #define GMII_LED2_LINK_10       BIT(8)
++      #define GMII_LED2_LINK_100      BIT(9)
++      #define GMII_LED2_LINK_1000     BIT(10)
++      #define LED0_ACTIVE             BIT(0)
++      #define LED0_LINK_10            BIT(1)
++      #define LED0_LINK_100           BIT(2)
++      #define LED0_LINK_1000          BIT(3)
++      #define LED0_FD                 BIT(4)
++      #define LED0_USB3_MASK          0x001f
++      #define LED1_ACTIVE             BIT(5)
++      #define LED1_LINK_10            BIT(6)
++      #define LED1_LINK_100           BIT(7)
++      #define LED1_LINK_1000          BIT(8)
++      #define LED1_FD                 BIT(9)
++      #define LED1_USB3_MASK          0x03e0
++      #define LED2_ACTIVE             BIT(10)
++      #define LED2_LINK_1000          BIT(13)
++      #define LED2_LINK_100           BIT(12)
++      #define LED2_LINK_10            BIT(11)
++      #define LED2_FD                 BIT(14)
++      #define LED_VALID               BIT(15)
++      #define LED2_USB3_MASK          0x7c00
++
++#define GMII_PHYPAGE                          0x1e
++#define GMII_PHY_PAGE_SELECT                  0x1f
++      #define GMII_PHY_PGSEL_EXT      0x0007
++      #define GMII_PHY_PGSEL_PAGE0    0x0000
++      #define GMII_PHY_PGSEL_PAGE3    0x0003
++      #define GMII_PHY_PGSEL_PAGE5    0x0005
++
++struct ax88179_data {
++      u8  eee_enabled;
++      u8  eee_active;
++      u16 rxctl;
++      u16 reserved;
++};
++
++struct ax88179_int_data {
++      __le32 intdata1;
++      __le32 intdata2;
++};
++
++static const struct {
++      unsigned char ctrl, timer_l, timer_h, size, ifg;
++} AX88179_BULKIN_SIZE[] =     {
++      {7, 0x4f, 0,    0x12, 0xff},
++      {7, 0x20, 3,    0x16, 0xff},
++      {7, 0xae, 7,    0x18, 0xff},
++      {7, 0xcc, 0x4c, 0x18, 8},
++};
++
++static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
++                            u16 size, void *data, int in_pm)
++{
++      int ret;
++      int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
++
++      BUG_ON(!dev);
++
++      if (!in_pm)
++              fn = usbnet_read_cmd;
++      else
++              fn = usbnet_read_cmd_nopm;
++
++      ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
++               value, index, data, size);
++
++      if (unlikely(ret < 0))
++              netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
++                          index, ret);
++
++      return ret;
++}
++
++static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
++                             u16 size, void *data, int in_pm)
++{
++      int ret;
++      int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
++
++      BUG_ON(!dev);
++
++      if (!in_pm)
++              fn = usbnet_write_cmd;
++      else
++              fn = usbnet_write_cmd_nopm;
++
++      ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
++               value, index, data, size);
++
++      if (unlikely(ret < 0))
++              netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
++                          index, ret);
++
++      return ret;
++}
++
++static void ax88179_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value,
++                                  u16 index, u16 size, void *data)
++{
++      u16 buf;
++
++      if (2 == size) {
++              buf = *((u16 *)data);
++              cpu_to_le16s(&buf);
++              usbnet_write_cmd_async(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR |
++                                     USB_RECIP_DEVICE, value, index, &buf,
++                                     size);
++      } else {
++              usbnet_write_cmd_async(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR |
++                                     USB_RECIP_DEVICE, value, index, data,
++                                     size);
++      }
++}
++
++static int ax88179_read_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value,
++                               u16 index, u16 size, void *data)
++{
++      int ret;
++
++      if (2 == size) {
++              u16 buf;
++              ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 1);
++              le16_to_cpus(&buf);
++              *((u16 *)data) = buf;
++      } else if (4 == size) {
++              u32 buf;
++              ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 1);
++              le32_to_cpus(&buf);
++              *((u32 *)data) = buf;
++      } else {
++              ret = __ax88179_read_cmd(dev, cmd, value, index, size, data, 1);
++      }
++
++      return ret;
++}
++
++static int ax88179_write_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value,
++                                u16 index, u16 size, void *data)
++{
++      int ret;
++
++      if (2 == size) {
++              u16 buf;
++              buf = *((u16 *)data);
++              cpu_to_le16s(&buf);
++              ret = __ax88179_write_cmd(dev, cmd, value, index,
++                                        size, &buf, 1);
++      } else {
++              ret = __ax88179_write_cmd(dev, cmd, value, index,
++                                        size, data, 1);
++      }
++
++      return ret;
++}
++
++static int ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
++                          u16 size, void *data)
++{
++      int ret;
++
++      if (2 == size) {
++              u16 buf;
++              ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 0);
++              le16_to_cpus(&buf);
++              *((u16 *)data) = buf;
++      } else if (4 == size) {
++              u32 buf;
++              ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 0);
++              le32_to_cpus(&buf);
++              *((u32 *)data) = buf;
++      } else {
++              ret = __ax88179_read_cmd(dev, cmd, value, index, size, data, 0);
++      }
++
++      return ret;
++}
++
++static int ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
++                           u16 size, void *data)
++{
++      int ret;
++
++      if (2 == size) {
++              u16 buf;
++              buf = *((u16 *)data);
++              cpu_to_le16s(&buf);
++              ret = __ax88179_write_cmd(dev, cmd, value, index,
++                                        size, &buf, 0);
++      } else {
++              ret = __ax88179_write_cmd(dev, cmd, value, index,
++                                        size, data, 0);
++      }
++
++      return ret;
++}
++
++static void ax88179_status(struct usbnet *dev, struct urb *urb)
++{
++      struct ax88179_int_data *event;
++      u32 link;
++
++      if (urb->actual_length < 8)
++              return;
++
++      event = urb->transfer_buffer;
++      le32_to_cpus((void *)&event->intdata1);
++
++      link = (((__force u32)event->intdata1) & AX_INT_PPLS_LINK) >> 16;
++
++      if (netif_carrier_ok(dev->net) != link) {
++              usbnet_link_change(dev, link, 1);
++              netdev_info(dev->net, "ax88179 - Link status is: %d\n", link);
++      }
++}
++
++static int ax88179_mdio_read(struct net_device *netdev, int phy_id, int loc)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      u16 res;
++
++      ax88179_read_cmd(dev, AX_ACCESS_PHY, phy_id, (__u16)loc, 2, &res);
++      return res;
++}
++
++static void ax88179_mdio_write(struct net_device *netdev, int phy_id, int loc,
++                             int val)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      u16 res = (u16) val;
++
++      ax88179_write_cmd(dev, AX_ACCESS_PHY, phy_id, (__u16)loc, 2, &res);
++}
++
++static inline int ax88179_phy_mmd_indirect(struct usbnet *dev, u16 prtad,
++                                         u16 devad)
++{
++      u16 tmp16;
++      int ret;
++
++      tmp16 = devad;
++      ret = ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                              MII_MMD_CTRL, 2, &tmp16);
++
++      tmp16 = prtad;
++      ret = ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                              MII_MMD_DATA, 2, &tmp16);
++
++      tmp16 = devad | MII_MMD_CTRL_NOINCR;
++      ret = ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                              MII_MMD_CTRL, 2, &tmp16);
++
++      return ret;
++}
++
++static int
++ax88179_phy_read_mmd_indirect(struct usbnet *dev, u16 prtad, u16 devad)
++{
++      int ret;
++      u16 tmp16;
++
++      ax88179_phy_mmd_indirect(dev, prtad, devad);
++
++      ret = ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                             MII_MMD_DATA, 2, &tmp16);
++      if (ret < 0)
++              return ret;
++
++      return tmp16;
++}
++
++static int
++ax88179_phy_write_mmd_indirect(struct usbnet *dev, u16 prtad, u16 devad,
++                             u16 data)
++{
++      int ret;
++
++      ax88179_phy_mmd_indirect(dev, prtad, devad);
++
++      ret = ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                              MII_MMD_DATA, 2, &data);
++
++      if (ret < 0)
++              return ret;
++
++      return 0;
++}
++
++static int ax88179_suspend(struct usb_interface *intf, pm_message_t message)
++{
++      struct usbnet *dev = usb_get_intfdata(intf);
++      u16 tmp16;
++      u8 tmp8;
++
++      usbnet_suspend(intf, message);
++
++      /* Disable RX path */
++      ax88179_read_cmd_nopm(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
++                            2, 2, &tmp16);
++      tmp16 &= ~AX_MEDIUM_RECEIVE_EN;
++      ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
++                             2, 2, &tmp16);
++
++      /* Force bulk-in zero length */
++      ax88179_read_cmd_nopm(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL,
++                            2, 2, &tmp16);
++
++      tmp16 |= AX_PHYPWR_RSTCTL_BZ | AX_PHYPWR_RSTCTL_IPRL;
++      ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL,
++                             2, 2, &tmp16);
++
++      /* change clock */
++      tmp8 = 0;
++      ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
++
++      /* Configure RX control register => stop operation */
++      tmp16 = AX_RX_CTL_STOP;
++      ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
++
++      return 0;
++}
++
++/* This function is used to enable the autodetach function. */
++/* This function is determined by offset 0x43 of EEPROM */
++static int ax88179_auto_detach(struct usbnet *dev, int in_pm)
++{
++      u16 tmp16;
++      u8 tmp8;
++      int (*fnr)(struct usbnet *, u8, u16, u16, u16, void *);
++      int (*fnw)(struct usbnet *, u8, u16, u16, u16, void *);
++
++      if (!in_pm) {
++              fnr = ax88179_read_cmd;
++              fnw = ax88179_write_cmd;
++      } else {
++              fnr = ax88179_read_cmd_nopm;
++              fnw = ax88179_write_cmd_nopm;
++      }
++
++      if (fnr(dev, AX_ACCESS_EEPROM, 0x43, 1, 2, &tmp16) < 0)
++              return 0;
++
++      if ((tmp16 == 0xFFFF) || (!(tmp16 & 0x0100)))
++              return 0;
++
++      /* Enable Auto Detach bit */
++      tmp8 = 0;
++      fnr(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
++      tmp8 |= AX_CLK_SELECT_ULR;
++      fnw(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
++
++      fnr(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
++      tmp16 |= AX_PHYPWR_RSTCTL_AT;
++      fnw(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
++
++      return 0;
++}
++
++static int ax88179_resume(struct usb_interface *intf)
++{
++      struct usbnet *dev = usb_get_intfdata(intf);
++      u16 tmp16;
++      u8 tmp8;
++
++      usbnet_link_change(dev, 0, 0);
++
++      /* Power up ethernet PHY */
++      tmp16 = 0;
++      ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL,
++                             2, 2, &tmp16);
++      udelay(1000);
++
++      tmp16 = AX_PHYPWR_RSTCTL_IPRL;
++      ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL,
++                             2, 2, &tmp16);
++      msleep(200);
++
++      /* Ethernet PHY Auto Detach*/
++      ax88179_auto_detach(dev, 1);
++
++      /* Enable clock */
++      ax88179_read_cmd_nopm(dev, AX_ACCESS_MAC,  AX_CLK_SELECT, 1, 1, &tmp8);
++      tmp8 |= AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS;
++      ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
++      msleep(100);
++
++      /* Configure RX control register => start operation */
++      tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
++              AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
++      ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
++
++      return usbnet_resume(intf);
++}
++
++static void
++ax88179_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
++{
++      struct usbnet *dev = netdev_priv(net);
++      u8 opt;
++
++      if (ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD,
++                           1, 1, &opt) < 0) {
++              wolinfo->supported = 0;
++              wolinfo->wolopts = 0;
++              return;
++      }
++
++      wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
++      wolinfo->wolopts = 0;
++      if (opt & AX_MONITOR_MODE_RWLC)
++              wolinfo->wolopts |= WAKE_PHY;
++      if (opt & AX_MONITOR_MODE_RWMP)
++              wolinfo->wolopts |= WAKE_MAGIC;
++}
++
++static int
++ax88179_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
++{
++      struct usbnet *dev = netdev_priv(net);
++      u8 opt = 0;
++
++      if (wolinfo->wolopts & WAKE_PHY)
++              opt |= AX_MONITOR_MODE_RWLC;
++      if (wolinfo->wolopts & WAKE_MAGIC)
++              opt |= AX_MONITOR_MODE_RWMP;
++
++      if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD,
++                            1, 1, &opt) < 0)
++              return -EINVAL;
++
++      return 0;
++}
++
++static int ax88179_get_eeprom_len(struct net_device *net)
++{
++      return AX_EEPROM_LEN;
++}
++
++static int
++ax88179_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
++                 u8 *data)
++{
++      struct usbnet *dev = netdev_priv(net);
++      u16 *eeprom_buff;
++      int first_word, last_word;
++      int i, ret;
++
++      if (eeprom->len == 0)
++              return -EINVAL;
++
++      eeprom->magic = AX88179_EEPROM_MAGIC;
++
++      first_word = eeprom->offset >> 1;
++      last_word = (eeprom->offset + eeprom->len - 1) >> 1;
++      eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1),
++                            GFP_KERNEL);
++      if (!eeprom_buff)
++              return -ENOMEM;
++
++      /* ax88179/178A returns 2 bytes from eeprom on read */
++      for (i = first_word; i <= last_word; i++) {
++              ret = __ax88179_read_cmd(dev, AX_ACCESS_EEPROM, i, 1, 2,
++                                       &eeprom_buff[i - first_word],
++                                       0);
++              if (ret < 0) {
++                      kfree(eeprom_buff);
++                      return -EIO;
++              }
++      }
++
++      memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
++      kfree(eeprom_buff);
++      return 0;
++}
++
++static int ax88179_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
++{
++      struct usbnet *dev = netdev_priv(net);
++      return mii_ethtool_gset(&dev->mii, cmd);
++}
++
++static int ax88179_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
++{
++      struct usbnet *dev = netdev_priv(net);
++      return mii_ethtool_sset(&dev->mii, cmd);
++}
++
++static int
++ax88179_ethtool_get_eee(struct usbnet *dev, struct ethtool_eee *data)
++{
++      int val;
++
++      /* Get Supported EEE */
++      val = ax88179_phy_read_mmd_indirect(dev, MDIO_PCS_EEE_ABLE,
++                                          MDIO_MMD_PCS);
++      if (val < 0)
++              return val;
++      data->supported = mmd_eee_cap_to_ethtool_sup_t(val);
++
++      /* Get advertisement EEE */
++      val = ax88179_phy_read_mmd_indirect(dev, MDIO_AN_EEE_ADV,
++                                          MDIO_MMD_AN);
++      if (val < 0)
++              return val;
++      data->advertised = mmd_eee_adv_to_ethtool_adv_t(val);
++
++      /* Get LP advertisement EEE */
++      val = ax88179_phy_read_mmd_indirect(dev, MDIO_AN_EEE_LPABLE,
++                                          MDIO_MMD_AN);
++      if (val < 0)
++              return val;
++      data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val);
++
++      return 0;
++}
++
++static int
++ax88179_ethtool_set_eee(struct usbnet *dev, struct ethtool_eee *data)
++{
++      u16 tmp16 = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
++
++      return ax88179_phy_write_mmd_indirect(dev, MDIO_AN_EEE_ADV,
++                                            MDIO_MMD_AN, tmp16);
++}
++
++static int ax88179_chk_eee(struct usbnet *dev)
++{
++      struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
++      struct ax88179_data *priv = (struct ax88179_data *)dev->data;
++
++      mii_ethtool_gset(&dev->mii, &ecmd);
++
++      if (ecmd.duplex & DUPLEX_FULL) {
++              int eee_lp, eee_cap, eee_adv;
++              u32 lp, cap, adv, supported = 0;
++
++              eee_cap = ax88179_phy_read_mmd_indirect(dev,
++                                                      MDIO_PCS_EEE_ABLE,
++                                                      MDIO_MMD_PCS);
++              if (eee_cap < 0) {
++                      priv->eee_active = 0;
++                      return false;
++              }
++
++              cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap);
++              if (!cap) {
++                      priv->eee_active = 0;
++                      return false;
++              }
++
++              eee_lp = ax88179_phy_read_mmd_indirect(dev,
++                                                     MDIO_AN_EEE_LPABLE,
++                                                     MDIO_MMD_AN);
++              if (eee_lp < 0) {
++                      priv->eee_active = 0;
++                      return false;
++              }
++
++              eee_adv = ax88179_phy_read_mmd_indirect(dev,
++                                                      MDIO_AN_EEE_ADV,
++                                                      MDIO_MMD_AN);
++
++              if (eee_adv < 0) {
++                      priv->eee_active = 0;
++                      return false;
++              }
++
++              adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
++              lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
++              supported = (ecmd.speed == SPEED_1000) ?
++                           SUPPORTED_1000baseT_Full :
++                           SUPPORTED_100baseT_Full;
++
++              if (!(lp & adv & supported)) {
++                      priv->eee_active = 0;
++                      return false;
++              }
++
++              priv->eee_active = 1;
++              return true;
++      }
++
++      priv->eee_active = 0;
++      return false;
++}
++
++static void ax88179_disable_eee(struct usbnet *dev)
++{
++      u16 tmp16;
++
++      tmp16 = GMII_PHY_PGSEL_PAGE3;
++      ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                        GMII_PHY_PAGE_SELECT, 2, &tmp16);
++
++      tmp16 = 0x3246;
++      ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                        MII_PHYADDR, 2, &tmp16);
++
++      tmp16 = GMII_PHY_PGSEL_PAGE0;
++      ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                        GMII_PHY_PAGE_SELECT, 2, &tmp16);
++}
++
++static void ax88179_enable_eee(struct usbnet *dev)
++{
++      u16 tmp16;
++
++      tmp16 = GMII_PHY_PGSEL_PAGE3;
++      ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                        GMII_PHY_PAGE_SELECT, 2, &tmp16);
++
++      tmp16 = 0x3247;
++      ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                        MII_PHYADDR, 2, &tmp16);
++
++      tmp16 = GMII_PHY_PGSEL_PAGE5;
++      ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                        GMII_PHY_PAGE_SELECT, 2, &tmp16);
++
++      tmp16 = 0x0680;
++      ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                        MII_BMSR, 2, &tmp16);
++
++      tmp16 = GMII_PHY_PGSEL_PAGE0;
++      ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                        GMII_PHY_PAGE_SELECT, 2, &tmp16);
++}
++
++static int ax88179_get_eee(struct net_device *net, struct ethtool_eee *edata)
++{
++      struct usbnet *dev = netdev_priv(net);
++      struct ax88179_data *priv = (struct ax88179_data *)dev->data;
++
++      edata->eee_enabled = priv->eee_enabled;
++      edata->eee_active = priv->eee_active;
++
++      return ax88179_ethtool_get_eee(dev, edata);
++}
++
++static int ax88179_set_eee(struct net_device *net, struct ethtool_eee *edata)
++{
++      struct usbnet *dev = netdev_priv(net);
++      struct ax88179_data *priv = (struct ax88179_data *)dev->data;
++      int ret = -EOPNOTSUPP;
++
++      priv->eee_enabled = edata->eee_enabled;
++      if (!priv->eee_enabled) {
++              ax88179_disable_eee(dev);
++      } else {
++              priv->eee_enabled = ax88179_chk_eee(dev);
++              if (!priv->eee_enabled)
++                      return -EOPNOTSUPP;
++
++              ax88179_enable_eee(dev);
++      }
++
++      ret = ax88179_ethtool_set_eee(dev, edata);
++      if (ret)
++              return ret;
++
++      mii_nway_restart(&dev->mii);
++
++      usbnet_link_change(dev, 0, 0);
++
++      return ret;
++}
++
++static int ax88179_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
++{
++      struct usbnet *dev = netdev_priv(net);
++      return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
++}
++
++static const struct ethtool_ops ax88179_ethtool_ops = {
++      .get_link               = ethtool_op_get_link,
++      .get_msglevel           = usbnet_get_msglevel,
++      .set_msglevel           = usbnet_set_msglevel,
++      .get_wol                = ax88179_get_wol,
++      .set_wol                = ax88179_set_wol,
++      .get_eeprom_len         = ax88179_get_eeprom_len,
++      .get_eeprom             = ax88179_get_eeprom,
++      .get_settings           = ax88179_get_settings,
++      .set_settings           = ax88179_set_settings,
++      .get_eee                = ax88179_get_eee,
++      .set_eee                = ax88179_set_eee,
++      .nway_reset             = usbnet_nway_reset,
++};
++
++static void ax88179_set_multicast(struct net_device *net)
++{
++      struct usbnet *dev = netdev_priv(net);
++      struct ax88179_data *data = (struct ax88179_data *)dev->data;
++      u8 *m_filter = ((u8 *)dev->data) + 12;
++
++      data->rxctl = (AX_RX_CTL_START | AX_RX_CTL_AB | AX_RX_CTL_IPE);
++
++      if (net->flags & IFF_PROMISC) {
++              data->rxctl |= AX_RX_CTL_PRO;
++      } else if (net->flags & IFF_ALLMULTI ||
++                 netdev_mc_count(net) > AX_MAX_MCAST) {
++              data->rxctl |= AX_RX_CTL_AMALL;
++      } else if (netdev_mc_empty(net)) {
++              /* just broadcast and directed */
++      } else {
++              /* We use the 20 byte dev->data for our 8 byte filter buffer
++               * to avoid allocating memory that is tricky to free later
++               */
++              u32 crc_bits;
++              struct netdev_hw_addr *ha;
++
++              memset(m_filter, 0, AX_MCAST_FLTSIZE);
++
++              netdev_for_each_mc_addr(ha, net) {
++                      crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
++                      *(m_filter + (crc_bits >> 3)) |= (1 << (crc_bits & 7));
++              }
++
++              ax88179_write_cmd_async(dev, AX_ACCESS_MAC, AX_MULFLTARY,
++                                      AX_MCAST_FLTSIZE, AX_MCAST_FLTSIZE,
++                                      m_filter);
++
++              data->rxctl |= AX_RX_CTL_AM;
++      }
++
++      ax88179_write_cmd_async(dev, AX_ACCESS_MAC, AX_RX_CTL,
++                              2, 2, &data->rxctl);
++}
++
++static int
++ax88179_set_features(struct net_device *net, netdev_features_t features)
++{
++      u8 tmp;
++      struct usbnet *dev = netdev_priv(net);
++      netdev_features_t changed = net->features ^ features;
++
++      if (changed & NETIF_F_IP_CSUM) {
++              ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
++              tmp ^= AX_TXCOE_TCP | AX_TXCOE_UDP;
++              ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
++      }
++
++      if (changed & NETIF_F_IPV6_CSUM) {
++              ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
++              tmp ^= AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6;
++              ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
++      }
++
++      if (changed & NETIF_F_RXCSUM) {
++              ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, &tmp);
++              tmp ^= AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP |
++                     AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6;
++              ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, &tmp);
++      }
++
++      return 0;
++}
++
++static int ax88179_change_mtu(struct net_device *net, int new_mtu)
++{
++      struct usbnet *dev = netdev_priv(net);
++      u16 tmp16;
++
++      if (new_mtu <= 0 || new_mtu > 4088)
++              return -EINVAL;
++
++      net->mtu = new_mtu;
++      dev->hard_mtu = net->mtu + net->hard_header_len;
++
++      if (net->mtu > 1500) {
++              ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
++                               2, 2, &tmp16);
++              tmp16 |= AX_MEDIUM_JUMBO_EN;
++              ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
++                                2, 2, &tmp16);
++      } else {
++              ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
++                               2, 2, &tmp16);
++              tmp16 &= ~AX_MEDIUM_JUMBO_EN;
++              ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
++                                2, 2, &tmp16);
++      }
++
++      /* max qlen depend on hard_mtu and rx_urb_size */
++      usbnet_update_max_qlen(dev);
++
++      return 0;
++}
++
++static int ax88179_set_mac_addr(struct net_device *net, void *p)
++{
++      struct usbnet *dev = netdev_priv(net);
++      struct sockaddr *addr = p;
++      int ret;
++
++      if (netif_running(net))
++              return -EBUSY;
++      if (!is_valid_ether_addr(addr->sa_data))
++              return -EADDRNOTAVAIL;
++
++      memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
++
++      /* Set the MAC address */
++      ret = ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN,
++                               ETH_ALEN, net->dev_addr);
++      if (ret < 0)
++              return ret;
++
++      return 0;
++}
++
++static const struct net_device_ops ax88179_netdev_ops = {
++      .ndo_open               = usbnet_open,
++      .ndo_stop               = usbnet_stop,
++      .ndo_start_xmit         = usbnet_start_xmit,
++      .ndo_tx_timeout         = usbnet_tx_timeout,
++      .ndo_change_mtu         = ax88179_change_mtu,
++      .ndo_set_mac_address    = ax88179_set_mac_addr,
++      .ndo_validate_addr      = eth_validate_addr,
++      .ndo_do_ioctl           = ax88179_ioctl,
++      .ndo_set_rx_mode        = ax88179_set_multicast,
++      .ndo_set_features       = ax88179_set_features,
++};
++
++static int ax88179_check_eeprom(struct usbnet *dev)
++{
++      u8 i, buf, eeprom[20];
++      u16 csum, delay = HZ / 10;
++      unsigned long jtimeout;
++
++      /* Read EEPROM content */
++      for (i = 0; i < 6; i++) {
++              buf = i;
++              if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_ADDR,
++                                    1, 1, &buf) < 0)
++                      return -EINVAL;
++
++              buf = EEP_RD;
++              if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
++                                    1, 1, &buf) < 0)
++                      return -EINVAL;
++
++              jtimeout = jiffies + delay;
++              do {
++                      ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
++                                       1, 1, &buf);
++
++                      if (time_after(jiffies, jtimeout))
++                              return -EINVAL;
++
++              } while (buf & EEP_BUSY);
++
++              __ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_DATA_LOW,
++                                 2, 2, &eeprom[i * 2], 0);
++
++              if ((i == 0) && (eeprom[0] == 0xFF))
++                      return -EINVAL;
++      }
++
++      csum = eeprom[6] + eeprom[7] + eeprom[8] + eeprom[9];
++      csum = (csum >> 8) + (csum & 0xff);
++      if ((csum + eeprom[10]) != 0xff)
++              return -EINVAL;
++
++      return 0;
++}
++
++static int ax88179_check_efuse(struct usbnet *dev, u16 *ledmode)
++{
++      u8      i;
++      u8      efuse[64];
++      u16     csum = 0;
++
++      if (ax88179_read_cmd(dev, AX_ACCESS_EFUS, 0, 64, 64, efuse) < 0)
++              return -EINVAL;
++
++      if (*efuse == 0xFF)
++              return -EINVAL;
++
++      for (i = 0; i < 64; i++)
++              csum = csum + efuse[i];
++
++      while (csum > 255)
++              csum = (csum & 0x00FF) + ((csum >> 8) & 0x00FF);
++
++      if (csum != 0xFF)
++              return -EINVAL;
++
++      *ledmode = (efuse[51] << 8) | efuse[52];
++
++      return 0;
++}
++
++static int ax88179_convert_old_led(struct usbnet *dev, u16 *ledvalue)
++{
++      u16 led;
++
++      /* Loaded the old eFuse LED Mode */
++      if (ax88179_read_cmd(dev, AX_ACCESS_EEPROM, 0x3C, 1, 2, &led) < 0)
++              return -EINVAL;
++
++      led >>= 8;
++      switch (led) {
++      case 0xFF:
++              led = LED0_ACTIVE | LED1_LINK_10 | LED1_LINK_100 |
++                    LED1_LINK_1000 | LED2_ACTIVE | LED2_LINK_10 |
++                    LED2_LINK_100 | LED2_LINK_1000 | LED_VALID;
++              break;
++      case 0xFE:
++              led = LED0_ACTIVE | LED1_LINK_1000 | LED2_LINK_100 | LED_VALID;
++              break;
++      case 0xFD:
++              led = LED0_ACTIVE | LED1_LINK_1000 | LED2_LINK_100 |
++                    LED2_LINK_10 | LED_VALID;
++              break;
++      case 0xFC:
++              led = LED0_ACTIVE | LED1_ACTIVE | LED1_LINK_1000 | LED2_ACTIVE |
++                    LED2_LINK_100 | LED2_LINK_10 | LED_VALID;
++              break;
++      default:
++              led = LED0_ACTIVE | LED1_LINK_10 | LED1_LINK_100 |
++                    LED1_LINK_1000 | LED2_ACTIVE | LED2_LINK_10 |
++                    LED2_LINK_100 | LED2_LINK_1000 | LED_VALID;
++              break;
++      }
++
++      *ledvalue = led;
++
++      return 0;
++}
++
++static int ax88179_led_setting(struct usbnet *dev)
++{
++      u8 ledfd, value = 0;
++      u16 tmp, ledact, ledlink, ledvalue = 0, delay = HZ / 10;
++      unsigned long jtimeout;
++
++      /* Check AX88179 version. UA1 or UA2*/
++      ax88179_read_cmd(dev, AX_ACCESS_MAC, GENERAL_STATUS, 1, 1, &value);
++
++      if (!(value & AX_SECLD)) {      /* UA1 */
++              value = AX_GPIO_CTRL_GPIO3EN | AX_GPIO_CTRL_GPIO2EN |
++                      AX_GPIO_CTRL_GPIO1EN;
++              if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_GPIO_CTRL,
++                                    1, 1, &value) < 0)
++                      return -EINVAL;
++      }
++
++      /* Check EEPROM */
++      if (!ax88179_check_eeprom(dev)) {
++              value = 0x42;
++              if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_ADDR,
++                                    1, 1, &value) < 0)
++                      return -EINVAL;
++
++              value = EEP_RD;
++              if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
++                                    1, 1, &value) < 0)
++                      return -EINVAL;
++
++              jtimeout = jiffies + delay;
++              do {
++                      ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
++                                       1, 1, &value);
++
++                      if (time_after(jiffies, jtimeout))
++                              return -EINVAL;
++
++              } while (value & EEP_BUSY);
++
++              ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_DATA_HIGH,
++                               1, 1, &value);
++              ledvalue = (value << 8);
++
++              ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_DATA_LOW,
++                               1, 1, &value);
++              ledvalue |= value;
++
++              /* load internal ROM for defaule setting */
++              if ((ledvalue == 0xFFFF) || ((ledvalue & LED_VALID) == 0))
++                      ax88179_convert_old_led(dev, &ledvalue);
++
++      } else if (!ax88179_check_efuse(dev, &ledvalue)) {
++              if ((ledvalue == 0xFFFF) || ((ledvalue & LED_VALID) == 0))
++                      ax88179_convert_old_led(dev, &ledvalue);
++      } else {
++              ax88179_convert_old_led(dev, &ledvalue);
++      }
++
++      tmp = GMII_PHY_PGSEL_EXT;
++      ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                        GMII_PHY_PAGE_SELECT, 2, &tmp);
++
++      tmp = 0x2c;
++      ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                        GMII_PHYPAGE, 2, &tmp);
++
++      ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                       GMII_LED_ACT, 2, &ledact);
++
++      ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                       GMII_LED_LINK, 2, &ledlink);
++
++      ledact &= GMII_LED_ACTIVE_MASK;
++      ledlink &= GMII_LED_LINK_MASK;
++
++      if (ledvalue & LED0_ACTIVE)
++              ledact |= GMII_LED0_ACTIVE;
++
++      if (ledvalue & LED1_ACTIVE)
++              ledact |= GMII_LED1_ACTIVE;
++
++      if (ledvalue & LED2_ACTIVE)
++              ledact |= GMII_LED2_ACTIVE;
++
++      if (ledvalue & LED0_LINK_10)
++              ledlink |= GMII_LED0_LINK_10;
++
++      if (ledvalue & LED1_LINK_10)
++              ledlink |= GMII_LED1_LINK_10;
++
++      if (ledvalue & LED2_LINK_10)
++              ledlink |= GMII_LED2_LINK_10;
++
++      if (ledvalue & LED0_LINK_100)
++              ledlink |= GMII_LED0_LINK_100;
++
++      if (ledvalue & LED1_LINK_100)
++              ledlink |= GMII_LED1_LINK_100;
++
++      if (ledvalue & LED2_LINK_100)
++              ledlink |= GMII_LED2_LINK_100;
++
++      if (ledvalue & LED0_LINK_1000)
++              ledlink |= GMII_LED0_LINK_1000;
++
++      if (ledvalue & LED1_LINK_1000)
++              ledlink |= GMII_LED1_LINK_1000;
++
++      if (ledvalue & LED2_LINK_1000)
++              ledlink |= GMII_LED2_LINK_1000;
++
++      tmp = ledact;
++      ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                        GMII_LED_ACT, 2, &tmp);
++
++      tmp = ledlink;
++      ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                        GMII_LED_LINK, 2, &tmp);
++
++      tmp = GMII_PHY_PGSEL_PAGE0;
++      ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                        GMII_PHY_PAGE_SELECT, 2, &tmp);
++
++      /* LED full duplex setting */
++      ledfd = 0;
++      if (ledvalue & LED0_FD)
++              ledfd |= 0x01;
++      else if ((ledvalue & LED0_USB3_MASK) == 0)
++              ledfd |= 0x02;
++
++      if (ledvalue & LED1_FD)
++              ledfd |= 0x04;
++      else if ((ledvalue & LED1_USB3_MASK) == 0)
++              ledfd |= 0x08;
++
++      if (ledvalue & LED2_FD)
++              ledfd |= 0x10;
++      else if ((ledvalue & LED2_USB3_MASK) == 0)
++              ledfd |= 0x20;
++
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_LEDCTRL, 1, 1, &ledfd);
++
++      return 0;
++}
++
++static int ax88179_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      u8 buf[5];
++      u16 *tmp16;
++      u8 *tmp;
++      struct ax88179_data *ax179_data = (struct ax88179_data *)dev->data;
++      struct ethtool_eee eee_data;
++
++      usbnet_get_endpoints(dev, intf);
++
++      tmp16 = (u16 *)buf;
++      tmp = (u8 *)buf;
++
++      memset(ax179_data, 0, sizeof(*ax179_data));
++
++      /* Power up ethernet PHY */
++      *tmp16 = 0;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
++      *tmp16 = AX_PHYPWR_RSTCTL_IPRL;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
++      msleep(200);
++
++      *tmp = AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, tmp);
++      msleep(100);
++
++      ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN,
++                       ETH_ALEN, dev->net->dev_addr);
++      memcpy(dev->net->perm_addr, dev->net->dev_addr, ETH_ALEN);
++
++      /* RX bulk configuration */
++      memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
++
++      dev->rx_urb_size = 1024 * 20;
++
++      *tmp = 0x34;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_LOW, 1, 1, tmp);
++
++      *tmp = 0x52;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_HIGH,
++                        1, 1, tmp);
++
++      dev->net->netdev_ops = &ax88179_netdev_ops;
++      dev->net->ethtool_ops = &ax88179_ethtool_ops;
++      dev->net->needed_headroom = 8;
++
++      /* Initialize MII structure */
++      dev->mii.dev = dev->net;
++      dev->mii.mdio_read = ax88179_mdio_read;
++      dev->mii.mdio_write = ax88179_mdio_write;
++      dev->mii.phy_id_mask = 0xff;
++      dev->mii.reg_num_mask = 0xff;
++      dev->mii.phy_id = 0x03;
++      dev->mii.supports_gmii = 1;
++
++      dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
++                            NETIF_F_RXCSUM;
++
++      dev->net->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
++                               NETIF_F_RXCSUM;
++
++      /* Enable checksum offload */
++      *tmp = AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP |
++             AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, tmp);
++
++      *tmp = AX_TXCOE_IP | AX_TXCOE_TCP | AX_TXCOE_UDP |
++             AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, tmp);
++
++      /* Configure RX control register => start operation */
++      *tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
++               AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16);
++
++      *tmp = AX_MONITOR_MODE_PMETYPE | AX_MONITOR_MODE_PMEPOL |
++             AX_MONITOR_MODE_RWMP;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD, 1, 1, tmp);
++
++      /* Configure default medium type => giga */
++      *tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
++               AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_FULL_DUPLEX |
++               AX_MEDIUM_GIGAMODE;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
++                        2, 2, tmp16);
++
++      ax88179_led_setting(dev);
++
++      ax179_data->eee_enabled = 0;
++      ax179_data->eee_active = 0;
++
++      ax88179_disable_eee(dev);
++
++      ax88179_ethtool_get_eee(dev, &eee_data);
++      eee_data.advertised = 0;
++      ax88179_ethtool_set_eee(dev, &eee_data);
++
++      /* Restart autoneg */
++      mii_nway_restart(&dev->mii);
++
++      usbnet_link_change(dev, 0, 0);
++
++      return 0;
++}
++
++static void ax88179_unbind(struct usbnet *dev, struct usb_interface *intf)
++{
++      u16 tmp16;
++
++      /* Configure RX control register => stop operation */
++      tmp16 = AX_RX_CTL_STOP;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
++
++      tmp16 = 0;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp16);
++
++      /* Power down ethernet PHY */
++      tmp16 = 0;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
++}
++
++static void
++ax88179_rx_checksum(struct sk_buff *skb, u32 *pkt_hdr)
++{
++      skb->ip_summed = CHECKSUM_NONE;
++
++      /* checksum error bit is set */
++      if ((*pkt_hdr & AX_RXHDR_L3CSUM_ERR) ||
++          (*pkt_hdr & AX_RXHDR_L4CSUM_ERR))
++              return;
++
++      /* It must be a TCP or UDP packet with a valid checksum */
++      if (((*pkt_hdr & AX_RXHDR_L4_TYPE_MASK) == AX_RXHDR_L4_TYPE_TCP) ||
++          ((*pkt_hdr & AX_RXHDR_L4_TYPE_MASK) == AX_RXHDR_L4_TYPE_UDP))
++              skb->ip_summed = CHECKSUM_UNNECESSARY;
++}
++
++static int ax88179_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
++{
++      struct sk_buff *ax_skb;
++      int pkt_cnt;
++      u32 rx_hdr;
++      u16 hdr_off;
++      u32 *pkt_hdr;
++
++      /* This check is no longer done by usbnet */
++      if (skb->len < dev->net->hard_header_len)
++              return 0;
++
++      skb_trim(skb, skb->len - 4);
++      memcpy(&rx_hdr, skb_tail_pointer(skb), 4);
++      le32_to_cpus(&rx_hdr);
++
++      pkt_cnt = (u16)rx_hdr;
++      hdr_off = (u16)(rx_hdr >> 16);
++      pkt_hdr = (u32 *)(skb->data + hdr_off);
++
++      while (pkt_cnt--) {
++              u16 pkt_len;
++
++              le32_to_cpus(pkt_hdr);
++              pkt_len = (*pkt_hdr >> 16) & 0x1fff;
++
++              /* Check CRC or runt packet */
++              if ((*pkt_hdr & AX_RXHDR_CRC_ERR) ||
++                  (*pkt_hdr & AX_RXHDR_DROP_ERR)) {
++                      skb_pull(skb, (pkt_len + 7) & 0xFFF8);
++                      pkt_hdr++;
++                      continue;
++              }
++
++              if (pkt_cnt == 0) {
++                      /* Skip IP alignment psudo header */
++                      skb_pull(skb, 2);
++                      skb->len = pkt_len;
++                      skb_set_tail_pointer(skb, pkt_len);
++                      skb->truesize = pkt_len + sizeof(struct sk_buff);
++                      ax88179_rx_checksum(skb, pkt_hdr);
++                      return 1;
++              }
++
++              ax_skb = skb_clone(skb, GFP_ATOMIC);
++              if (ax_skb) {
++                      ax_skb->len = pkt_len;
++                      ax_skb->data = skb->data + 2;
++                      skb_set_tail_pointer(ax_skb, pkt_len);
++                      ax_skb->truesize = pkt_len + sizeof(struct sk_buff);
++                      ax88179_rx_checksum(ax_skb, pkt_hdr);
++                      usbnet_skb_return(dev, ax_skb);
++              } else {
++                      return 0;
++              }
++
++              skb_pull(skb, (pkt_len + 7) & 0xFFF8);
++              pkt_hdr++;
++      }
++      return 1;
++}
++
++static struct sk_buff *
++ax88179_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
++{
++      u32 tx_hdr1, tx_hdr2;
++      int frame_size = dev->maxpacket;
++      int mss = skb_shinfo(skb)->gso_size;
++      int headroom;
++
++      tx_hdr1 = skb->len;
++      tx_hdr2 = mss;
++      if (((skb->len + 8) % frame_size) == 0)
++              tx_hdr2 |= 0x80008000;  /* Enable padding */
++
++      headroom = skb_headroom(skb) - 8;
++
++      if ((skb_header_cloned(skb) || headroom < 0) &&
++          pskb_expand_head(skb, headroom < 0 ? 8 : 0, 0, GFP_ATOMIC)) {
++              dev_kfree_skb_any(skb);
++              return NULL;
++      }
++
++      skb_push(skb, 4);
++      cpu_to_le32s(&tx_hdr2);
++      skb_copy_to_linear_data(skb, &tx_hdr2, 4);
++
++      skb_push(skb, 4);
++      cpu_to_le32s(&tx_hdr1);
++      skb_copy_to_linear_data(skb, &tx_hdr1, 4);
++
++      return skb;
++}
++
++static int ax88179_link_reset(struct usbnet *dev)
++{
++      struct ax88179_data *ax179_data = (struct ax88179_data *)dev->data;
++      u8 tmp[5], link_sts;
++      u16 mode, tmp16, delay = HZ / 10;
++      u32 tmp32 = 0x40000000;
++      unsigned long jtimeout;
++
++      jtimeout = jiffies + delay;
++      while (tmp32 & 0x40000000) {
++              mode = 0;
++              ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &mode);
++              ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2,
++                                &ax179_data->rxctl);
++
++              /*link up, check the usb device control TX FIFO full or empty*/
++              ax88179_read_cmd(dev, 0x81, 0x8c, 0, 4, &tmp32);
++
++              if (time_after(jiffies, jtimeout))
++                      return 0;
++      }
++
++      mode = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
++             AX_MEDIUM_RXFLOW_CTRLEN;
++
++      ax88179_read_cmd(dev, AX_ACCESS_MAC, PHYSICAL_LINK_STATUS,
++                       1, 1, &link_sts);
++
++      ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
++                       GMII_PHY_PHYSR, 2, &tmp16);
++
++      if (!(tmp16 & GMII_PHY_PHYSR_LINK)) {
++              return 0;
++      } else if (GMII_PHY_PHYSR_GIGA == (tmp16 & GMII_PHY_PHYSR_SMASK)) {
++              mode |= AX_MEDIUM_GIGAMODE | AX_MEDIUM_EN_125MHZ;
++              if (dev->net->mtu > 1500)
++                      mode |= AX_MEDIUM_JUMBO_EN;
++
++              if (link_sts & AX_USB_SS)
++                      memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
++              else if (link_sts & AX_USB_HS)
++                      memcpy(tmp, &AX88179_BULKIN_SIZE[1], 5);
++              else
++                      memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
++      } else if (GMII_PHY_PHYSR_100 == (tmp16 & GMII_PHY_PHYSR_SMASK)) {
++              mode |= AX_MEDIUM_PS;
++
++              if (link_sts & (AX_USB_SS | AX_USB_HS))
++                      memcpy(tmp, &AX88179_BULKIN_SIZE[2], 5);
++              else
++                      memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
++      } else {
++              memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
++      }
++
++      /* RX bulk configuration */
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
++
++      dev->rx_urb_size = (1024 * (tmp[3] + 2));
++
++      if (tmp16 & GMII_PHY_PHYSR_FULL)
++              mode |= AX_MEDIUM_FULL_DUPLEX;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
++                        2, 2, &mode);
++
++      ax179_data->eee_enabled = ax88179_chk_eee(dev);
++
++      netif_carrier_on(dev->net);
++
++      return 0;
++}
++
++static int ax88179_reset(struct usbnet *dev)
++{
++      u8 buf[5];
++      u16 *tmp16;
++      u8 *tmp;
++      struct ax88179_data *ax179_data = (struct ax88179_data *)dev->data;
++      struct ethtool_eee eee_data;
++
++      tmp16 = (u16 *)buf;
++      tmp = (u8 *)buf;
++
++      /* Power up ethernet PHY */
++      *tmp16 = 0;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
++
++      *tmp16 = AX_PHYPWR_RSTCTL_IPRL;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
++      msleep(200);
++
++      *tmp = AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, tmp);
++      msleep(100);
++
++      /* Ethernet PHY Auto Detach*/
++      ax88179_auto_detach(dev, 0);
++
++      ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN, ETH_ALEN,
++                       dev->net->dev_addr);
++      memcpy(dev->net->perm_addr, dev->net->dev_addr, ETH_ALEN);
++
++      /* RX bulk configuration */
++      memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
++
++      dev->rx_urb_size = 1024 * 20;
++
++      *tmp = 0x34;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_LOW, 1, 1, tmp);
++
++      *tmp = 0x52;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_HIGH,
++                        1, 1, tmp);
++
++      dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
++                            NETIF_F_RXCSUM;
++
++      dev->net->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
++                               NETIF_F_RXCSUM;
++
++      /* Enable checksum offload */
++      *tmp = AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP |
++             AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, tmp);
++
++      *tmp = AX_TXCOE_IP | AX_TXCOE_TCP | AX_TXCOE_UDP |
++             AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, tmp);
++
++      /* Configure RX control register => start operation */
++      *tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
++               AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16);
++
++      *tmp = AX_MONITOR_MODE_PMETYPE | AX_MONITOR_MODE_PMEPOL |
++             AX_MONITOR_MODE_RWMP;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD, 1, 1, tmp);
++
++      /* Configure default medium type => giga */
++      *tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
++               AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_FULL_DUPLEX |
++               AX_MEDIUM_GIGAMODE;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
++                        2, 2, tmp16);
++
++      ax88179_led_setting(dev);
++
++      ax179_data->eee_enabled = 0;
++      ax179_data->eee_active = 0;
++
++      ax88179_disable_eee(dev);
++
++      ax88179_ethtool_get_eee(dev, &eee_data);
++      eee_data.advertised = 0;
++      ax88179_ethtool_set_eee(dev, &eee_data);
++
++      /* Restart autoneg */
++      mii_nway_restart(&dev->mii);
++
++      usbnet_link_change(dev, 0, 0);
++
++      return 0;
++}
++
++static int ax88179_stop(struct usbnet *dev)
++{
++      u16 tmp16;
++
++      ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
++                       2, 2, &tmp16);
++      tmp16 &= ~AX_MEDIUM_RECEIVE_EN;
++      ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
++                        2, 2, &tmp16);
++
++      return 0;
++}
++
++static const struct driver_info ax88179_info = {
++      .description = "ASIX AX88179 USB 3.0 Gigabit Ethernet",
++      .bind = ax88179_bind,
++      .unbind = ax88179_unbind,
++      .status = ax88179_status,
++      .link_reset = ax88179_link_reset,
++      .reset = ax88179_reset,
++      .stop = ax88179_stop,
++      .flags = FLAG_ETHER | FLAG_FRAMING_AX,
++      .rx_fixup = ax88179_rx_fixup,
++      .tx_fixup = ax88179_tx_fixup,
++};
++
++static const struct driver_info ax88178a_info = {
++      .description = "ASIX AX88178A USB 2.0 Gigabit Ethernet",
++      .bind = ax88179_bind,
++      .unbind = ax88179_unbind,
++      .status = ax88179_status,
++      .link_reset = ax88179_link_reset,
++      .reset = ax88179_reset,
++      .stop = ax88179_stop,
++      .flags = FLAG_ETHER | FLAG_FRAMING_AX,
++      .rx_fixup = ax88179_rx_fixup,
++      .tx_fixup = ax88179_tx_fixup,
++};
++
++static const struct driver_info dlink_dub1312_info = {
++      .description = "D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter",
++      .bind = ax88179_bind,
++      .unbind = ax88179_unbind,
++      .status = ax88179_status,
++      .link_reset = ax88179_link_reset,
++      .reset = ax88179_reset,
++      .stop = ax88179_stop,
++      .flags = FLAG_ETHER | FLAG_FRAMING_AX,
++      .rx_fixup = ax88179_rx_fixup,
++      .tx_fixup = ax88179_tx_fixup,
++};
++
++static const struct driver_info sitecom_info = {
++      .description = "Sitecom USB 3.0 to Gigabit Adapter",
++      .bind = ax88179_bind,
++      .unbind = ax88179_unbind,
++      .status = ax88179_status,
++      .link_reset = ax88179_link_reset,
++      .reset = ax88179_reset,
++      .stop = ax88179_stop,
++      .flags = FLAG_ETHER | FLAG_FRAMING_AX,
++      .rx_fixup = ax88179_rx_fixup,
++      .tx_fixup = ax88179_tx_fixup,
++};
++
++static const struct driver_info samsung_info = {
++      .description = "Samsung USB Ethernet Adapter",
++      .bind = ax88179_bind,
++      .unbind = ax88179_unbind,
++      .status = ax88179_status,
++      .link_reset = ax88179_link_reset,
++      .reset = ax88179_reset,
++      .stop = ax88179_stop,
++      .flags = FLAG_ETHER | FLAG_FRAMING_AX,
++      .rx_fixup = ax88179_rx_fixup,
++      .tx_fixup = ax88179_tx_fixup,
++};
++
++static const struct driver_info lenovo_info = {
++      .description = "Lenovo OneLinkDock Gigabit LAN",
++      .bind = ax88179_bind,
++      .unbind = ax88179_unbind,
++      .status = ax88179_status,
++      .link_reset = ax88179_link_reset,
++      .reset = ax88179_reset,
++      .stop = ax88179_stop,
++      .flags = FLAG_ETHER | FLAG_FRAMING_AX,
++      .rx_fixup = ax88179_rx_fixup,
++      .tx_fixup = ax88179_tx_fixup,
++};
++
++static const struct usb_device_id products[] = {
++{
++      /* ASIX AX88179 10/100/1000 */
++      USB_DEVICE(0x0b95, 0x1790),
++      .driver_info = (unsigned long)&ax88179_info,
++}, {
++      /* ASIX AX88178A 10/100/1000 */
++      USB_DEVICE(0x0b95, 0x178a),
++      .driver_info = (unsigned long)&ax88178a_info,
++}, {
++      /* D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter */
++      USB_DEVICE(0x2001, 0x4a00),
++      .driver_info = (unsigned long)&dlink_dub1312_info,
++}, {
++      /* Sitecom USB 3.0 to Gigabit Adapter */
++      USB_DEVICE(0x0df6, 0x0072),
++      .driver_info = (unsigned long)&sitecom_info,
++}, {
++      /* Samsung USB Ethernet Adapter */
++      USB_DEVICE(0x04e8, 0xa100),
++      .driver_info = (unsigned long)&samsung_info,
++}, {
++      /* Lenovo OneLinkDock Gigabit LAN */
++      USB_DEVICE(0x17ef, 0x304b),
++      .driver_info = (unsigned long)&lenovo_info,
++},
++      { },
++};
++MODULE_DEVICE_TABLE(usb, products);
++
++static struct usb_driver ax88179_178a_driver = {
++      .name =         "ax88179_178a",
++      .id_table =     products,
++      .probe =        usbnet_probe,
++      .suspend =      ax88179_suspend,
++      .resume =       ax88179_resume,
++      .reset_resume = ax88179_resume,
++      .disconnect =   usbnet_disconnect,
++      .supports_autosuspend = 1,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(ax88179_178a_driver);
++
++MODULE_DESCRIPTION("ASIX AX88179/178A based USB 3.0/2.0 Gigabit Ethernet Devices");
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/catc.c backports-3.18.1-1/drivers/net/usb/catc.c
+--- backports-3.18.1-1.org/drivers/net/usb/catc.c      1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/catc.c  2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,965 @@
++/*
++ *  Copyright (c) 2001 Vojtech Pavlik
++ *
++ *  CATC EL1210A NetMate USB Ethernet driver
++ *
++ *  Sponsored by SuSE
++ *
++ *  Based on the work of
++ *            Donald Becker
++ * 
++ *  Old chipset support added by Simon Evans <spse@secret.org.uk> 2002
++ *    - adds support for Belkin F5U011
++ */
++
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or 
++ * (at your option) any later version.
++ * 
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ * 
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ * 
++ * Should you need to contact me, the author, you can do so either by
++ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
++ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/skbuff.h>
++#include <linux/spinlock.h>
++#include <linux/ethtool.h>
++#include <linux/crc32.h>
++#include <linux/bitops.h>
++#include <linux/gfp.h>
++#include <asm/uaccess.h>
++
++#undef DEBUG
++
++#include <linux/usb.h>
++
++/*
++ * Version information.
++ */
++
++#define DRIVER_VERSION "v2.8"
++#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@suse.cz>"
++#define DRIVER_DESC "CATC EL1210A NetMate USB Ethernet driver"
++#define SHORT_DRIVER_DESC "EL1210A NetMate USB Ethernet"
++
++MODULE_AUTHOR(DRIVER_AUTHOR);
++MODULE_DESCRIPTION(DRIVER_DESC);
++MODULE_LICENSE("GPL");
++
++static const char driver_name[] = "catc";
++
++/*
++ * Some defines.
++ */ 
++
++#define STATS_UPDATE          (HZ)    /* Time between stats updates */
++#define TX_TIMEOUT            (5*HZ)  /* Max time the queue can be stopped */
++#define PKT_SZ                        1536    /* Max Ethernet packet size */
++#define RX_MAX_BURST          15      /* Max packets per rx buffer (> 0, < 16) */
++#define TX_MAX_BURST          15      /* Max full sized packets per tx buffer (> 0) */
++#define CTRL_QUEUE            16      /* Max control requests in flight (power of two) */
++#define RX_PKT_SZ             1600    /* Max size of receive packet for F5U011 */
++
++/*
++ * Control requests.
++ */
++
++enum control_requests {
++      ReadMem =       0xf1,
++      GetMac =        0xf2,
++      Reset =         0xf4,
++      SetMac =        0xf5,
++      SetRxMode =     0xf5,  /* F5U011 only */
++      WriteROM =      0xf8,
++      SetReg =        0xfa,
++      GetReg =        0xfb,
++      WriteMem =      0xfc,
++      ReadROM =       0xfd,
++};
++
++/*
++ * Registers.
++ */
++
++enum register_offsets {
++      TxBufCount =    0x20,
++      RxBufCount =    0x21,
++      OpModes =       0x22,
++      TxQed =         0x23,
++      RxQed =         0x24,
++      MaxBurst =      0x25,
++      RxUnit =        0x60,
++      EthStatus =     0x61,
++      StationAddr0 =  0x67,
++      EthStats =      0x69,
++      LEDCtrl =       0x81,
++};
++
++enum eth_stats {
++      TxSingleColl =  0x00,
++        TxMultiColl = 0x02,
++        TxExcessColl =        0x04,
++        RxFramErr =   0x06,
++};
++
++enum op_mode_bits {
++      Op3MemWaits =   0x03,
++      OpLenInclude =  0x08,
++      OpRxMerge =     0x10,
++      OpTxMerge =     0x20,
++      OpWin95bugfix = 0x40,
++      OpLoopback =    0x80,
++};
++
++enum rx_filter_bits {
++      RxEnable =      0x01,
++      RxPolarity =    0x02,
++      RxForceOK =     0x04,
++      RxMultiCast =   0x08,
++      RxPromisc =     0x10,
++      AltRxPromisc =  0x20, /* F5U011 uses different bit */
++};
++
++enum led_values {
++      LEDFast =       0x01,
++      LEDSlow =       0x02,
++      LEDFlash =      0x03,
++      LEDPulse =      0x04,
++      LEDLink =       0x08,
++};
++
++enum link_status {
++      LinkNoChange = 0,
++      LinkGood     = 1,
++      LinkBad      = 2
++};
++
++/*
++ * The catc struct.
++ */
++
++#define CTRL_RUNNING  0
++#define RX_RUNNING    1
++#define TX_RUNNING    2
++
++struct catc {
++      struct net_device *netdev;
++      struct usb_device *usbdev;
++
++      unsigned long flags;
++
++      unsigned int tx_ptr, tx_idx;
++      unsigned int ctrl_head, ctrl_tail;
++      spinlock_t tx_lock, ctrl_lock;
++
++      u8 tx_buf[2][TX_MAX_BURST * (PKT_SZ + 2)];
++      u8 rx_buf[RX_MAX_BURST * (PKT_SZ + 2)];
++      u8 irq_buf[2];
++      u8 ctrl_buf[64];
++      struct usb_ctrlrequest ctrl_dr;
++
++      struct timer_list timer;
++      u8 stats_buf[8];
++      u16 stats_vals[4];
++      unsigned long last_stats;
++
++      u8 multicast[64];
++
++      struct ctrl_queue {
++              u8 dir;
++              u8 request;
++              u16 value;
++              u16 index;
++              void *buf;
++              int len;
++              void (*callback)(struct catc *catc, struct ctrl_queue *q);
++      } ctrl_queue[CTRL_QUEUE];
++
++      struct urb *tx_urb, *rx_urb, *irq_urb, *ctrl_urb;
++
++      u8 is_f5u011;   /* Set if device is an F5U011 */
++      u8 rxmode[2];   /* Used for F5U011 */
++      atomic_t recq_sz; /* Used for F5U011 - counter of waiting rx packets */
++};
++
++/*
++ * Useful macros.
++ */
++
++#define catc_get_mac(catc, mac)                               catc_ctrl_msg(catc, USB_DIR_IN,  GetMac, 0, 0, mac,  6)
++#define catc_reset(catc)                              catc_ctrl_msg(catc, USB_DIR_OUT, Reset, 0, 0, NULL, 0)
++#define catc_set_reg(catc, reg, val)                  catc_ctrl_msg(catc, USB_DIR_OUT, SetReg, val, reg, NULL, 0)
++#define catc_get_reg(catc, reg, buf)                  catc_ctrl_msg(catc, USB_DIR_IN,  GetReg, 0, reg, buf, 1)
++#define catc_write_mem(catc, addr, buf, size)         catc_ctrl_msg(catc, USB_DIR_OUT, WriteMem, 0, addr, buf, size)
++#define catc_read_mem(catc, addr, buf, size)          catc_ctrl_msg(catc, USB_DIR_IN,  ReadMem, 0, addr, buf, size)
++
++#define f5u011_rxmode(catc, rxmode)                   catc_ctrl_msg(catc, USB_DIR_OUT, SetRxMode, 0, 1, rxmode, 2)
++#define f5u011_rxmode_async(catc, rxmode)             catc_ctrl_async(catc, USB_DIR_OUT, SetRxMode, 0, 1, &rxmode, 2, NULL)
++#define f5u011_mchash_async(catc, hash)                       catc_ctrl_async(catc, USB_DIR_OUT, SetRxMode, 0, 2, &hash, 8, NULL)
++
++#define catc_set_reg_async(catc, reg, val)            catc_ctrl_async(catc, USB_DIR_OUT, SetReg, val, reg, NULL, 0, NULL)
++#define catc_get_reg_async(catc, reg, cb)             catc_ctrl_async(catc, USB_DIR_IN, GetReg, 0, reg, NULL, 1, cb)
++#define catc_write_mem_async(catc, addr, buf, size)   catc_ctrl_async(catc, USB_DIR_OUT, WriteMem, 0, addr, buf, size, NULL)
++
++/*
++ * Receive routines.
++ */
++
++static void catc_rx_done(struct urb *urb)
++{
++      struct catc *catc = urb->context;
++      u8 *pkt_start = urb->transfer_buffer;
++      struct sk_buff *skb;
++      int pkt_len, pkt_offset = 0;
++      int status = urb->status;
++
++      if (!catc->is_f5u011) {
++              clear_bit(RX_RUNNING, &catc->flags);
++              pkt_offset = 2;
++      }
++
++      if (status) {
++              dev_dbg(&urb->dev->dev, "rx_done, status %d, length %d\n",
++                      status, urb->actual_length);
++              return;
++      }
++
++      do {
++              if(!catc->is_f5u011) {
++                      pkt_len = le16_to_cpup((__le16*)pkt_start);
++                      if (pkt_len > urb->actual_length) {
++                              catc->netdev->stats.rx_length_errors++;
++                              catc->netdev->stats.rx_errors++;
++                              break;
++                      }
++              } else {
++                      pkt_len = urb->actual_length;
++              }
++
++              if (!(skb = dev_alloc_skb(pkt_len)))
++                      return;
++
++              skb_copy_to_linear_data(skb, pkt_start + pkt_offset, pkt_len);
++              skb_put(skb, pkt_len);
++
++              skb->protocol = eth_type_trans(skb, catc->netdev);
++              netif_rx(skb);
++
++              catc->netdev->stats.rx_packets++;
++              catc->netdev->stats.rx_bytes += pkt_len;
++
++              /* F5U011 only does one packet per RX */
++              if (catc->is_f5u011)
++                      break;
++              pkt_start += (((pkt_len + 1) >> 6) + 1) << 6;
++
++      } while (pkt_start - (u8 *) urb->transfer_buffer < urb->actual_length);
++
++      if (catc->is_f5u011) {
++              if (atomic_read(&catc->recq_sz)) {
++                      int state;
++                      atomic_dec(&catc->recq_sz);
++                      netdev_dbg(catc->netdev, "getting extra packet\n");
++                      urb->dev = catc->usbdev;
++                      if ((state = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
++                              netdev_dbg(catc->netdev,
++                                         "submit(rx_urb) status %d\n", state);
++                      }
++              } else {
++                      clear_bit(RX_RUNNING, &catc->flags);
++              }
++      }
++}
++
++static void catc_irq_done(struct urb *urb)
++{
++      struct catc *catc = urb->context;
++      u8 *data = urb->transfer_buffer;
++      int status = urb->status;
++      unsigned int hasdata = 0, linksts = LinkNoChange;
++      int res;
++
++      if (!catc->is_f5u011) {
++              hasdata = data[1] & 0x80;
++              if (data[1] & 0x40)
++                      linksts = LinkGood;
++              else if (data[1] & 0x20)
++                      linksts = LinkBad;
++      } else {
++              hasdata = (unsigned int)(be16_to_cpup((__be16*)data) & 0x0fff);
++              if (data[0] == 0x90)
++                      linksts = LinkGood;
++              else if (data[0] == 0xA0)
++                      linksts = LinkBad;
++      }
++
++      switch (status) {
++      case 0:                 /* success */
++              break;
++      case -ECONNRESET:       /* unlink */
++      case -ENOENT:
++      case -ESHUTDOWN:
++              return;
++      /* -EPIPE:  should clear the halt */
++      default:                /* error */
++              dev_dbg(&urb->dev->dev,
++                      "irq_done, status %d, data %02x %02x.\n",
++                      status, data[0], data[1]);
++              goto resubmit;
++      }
++
++      if (linksts == LinkGood) {
++              netif_carrier_on(catc->netdev);
++              netdev_dbg(catc->netdev, "link ok\n");
++      }
++
++      if (linksts == LinkBad) {
++              netif_carrier_off(catc->netdev);
++              netdev_dbg(catc->netdev, "link bad\n");
++      }
++
++      if (hasdata) {
++              if (test_and_set_bit(RX_RUNNING, &catc->flags)) {
++                      if (catc->is_f5u011)
++                              atomic_inc(&catc->recq_sz);
++              } else {
++                      catc->rx_urb->dev = catc->usbdev;
++                      if ((res = usb_submit_urb(catc->rx_urb, GFP_ATOMIC)) < 0) {
++                              dev_err(&catc->usbdev->dev,
++                                      "submit(rx_urb) status %d\n", res);
++                      }
++              } 
++      }
++resubmit:
++      res = usb_submit_urb (urb, GFP_ATOMIC);
++      if (res)
++              dev_err(&catc->usbdev->dev,
++                      "can't resubmit intr, %s-%s, status %d\n",
++                      catc->usbdev->bus->bus_name,
++                      catc->usbdev->devpath, res);
++}
++
++/*
++ * Transmit routines.
++ */
++
++static int catc_tx_run(struct catc *catc)
++{
++      int status;
++
++      if (catc->is_f5u011)
++              catc->tx_ptr = (catc->tx_ptr + 63) & ~63;
++
++      catc->tx_urb->transfer_buffer_length = catc->tx_ptr;
++      catc->tx_urb->transfer_buffer = catc->tx_buf[catc->tx_idx];
++      catc->tx_urb->dev = catc->usbdev;
++
++      if ((status = usb_submit_urb(catc->tx_urb, GFP_ATOMIC)) < 0)
++              dev_err(&catc->usbdev->dev, "submit(tx_urb), status %d\n",
++                      status);
++
++      catc->tx_idx = !catc->tx_idx;
++      catc->tx_ptr = 0;
++
++      catc->netdev->trans_start = jiffies;
++      return status;
++}
++
++static void catc_tx_done(struct urb *urb)
++{
++      struct catc *catc = urb->context;
++      unsigned long flags;
++      int r, status = urb->status;
++
++      if (status == -ECONNRESET) {
++              dev_dbg(&urb->dev->dev, "Tx Reset.\n");
++              urb->status = 0;
++              catc->netdev->trans_start = jiffies;
++              catc->netdev->stats.tx_errors++;
++              clear_bit(TX_RUNNING, &catc->flags);
++              netif_wake_queue(catc->netdev);
++              return;
++      }
++
++      if (status) {
++              dev_dbg(&urb->dev->dev, "tx_done, status %d, length %d\n",
++                      status, urb->actual_length);
++              return;
++      }
++
++      spin_lock_irqsave(&catc->tx_lock, flags);
++
++      if (catc->tx_ptr) {
++              r = catc_tx_run(catc);
++              if (unlikely(r < 0))
++                      clear_bit(TX_RUNNING, &catc->flags);
++      } else {
++              clear_bit(TX_RUNNING, &catc->flags);
++      }
++
++      netif_wake_queue(catc->netdev);
++
++      spin_unlock_irqrestore(&catc->tx_lock, flags);
++}
++
++static netdev_tx_t catc_start_xmit(struct sk_buff *skb,
++                                       struct net_device *netdev)
++{
++      struct catc *catc = netdev_priv(netdev);
++      unsigned long flags;
++      int r = 0;
++      char *tx_buf;
++
++      spin_lock_irqsave(&catc->tx_lock, flags);
++
++      catc->tx_ptr = (((catc->tx_ptr - 1) >> 6) + 1) << 6;
++      tx_buf = catc->tx_buf[catc->tx_idx] + catc->tx_ptr;
++      if (catc->is_f5u011)
++              *(__be16 *)tx_buf = cpu_to_be16(skb->len);
++      else
++              *(__le16 *)tx_buf = cpu_to_le16(skb->len);
++      skb_copy_from_linear_data(skb, tx_buf + 2, skb->len);
++      catc->tx_ptr += skb->len + 2;
++
++      if (!test_and_set_bit(TX_RUNNING, &catc->flags)) {
++              r = catc_tx_run(catc);
++              if (r < 0)
++                      clear_bit(TX_RUNNING, &catc->flags);
++      }
++
++      if ((catc->is_f5u011 && catc->tx_ptr) ||
++          (catc->tx_ptr >= ((TX_MAX_BURST - 1) * (PKT_SZ + 2))))
++              netif_stop_queue(netdev);
++
++      spin_unlock_irqrestore(&catc->tx_lock, flags);
++
++      if (r >= 0) {
++              catc->netdev->stats.tx_bytes += skb->len;
++              catc->netdev->stats.tx_packets++;
++      }
++
++      dev_kfree_skb(skb);
++
++      return NETDEV_TX_OK;
++}
++
++static void catc_tx_timeout(struct net_device *netdev)
++{
++      struct catc *catc = netdev_priv(netdev);
++
++      dev_warn(&netdev->dev, "Transmit timed out.\n");
++      usb_unlink_urb(catc->tx_urb);
++}
++
++/*
++ * Control messages.
++ */
++
++static int catc_ctrl_msg(struct catc *catc, u8 dir, u8 request, u16 value, u16 index, void *buf, int len)
++{
++        int retval = usb_control_msg(catc->usbdev,
++              dir ? usb_rcvctrlpipe(catc->usbdev, 0) : usb_sndctrlpipe(catc->usbdev, 0),
++               request, 0x40 | dir, value, index, buf, len, 1000);
++        return retval < 0 ? retval : 0;
++}
++
++static void catc_ctrl_run(struct catc *catc)
++{
++      struct ctrl_queue *q = catc->ctrl_queue + catc->ctrl_tail;
++      struct usb_device *usbdev = catc->usbdev;
++      struct urb *urb = catc->ctrl_urb;
++      struct usb_ctrlrequest *dr = &catc->ctrl_dr;
++      int status;
++
++      dr->bRequest = q->request;
++      dr->bRequestType = 0x40 | q->dir;
++      dr->wValue = cpu_to_le16(q->value);
++      dr->wIndex = cpu_to_le16(q->index);
++      dr->wLength = cpu_to_le16(q->len);
++
++        urb->pipe = q->dir ? usb_rcvctrlpipe(usbdev, 0) : usb_sndctrlpipe(usbdev, 0);
++      urb->transfer_buffer_length = q->len;
++      urb->transfer_buffer = catc->ctrl_buf;
++      urb->setup_packet = (void *) dr;
++      urb->dev = usbdev;
++
++      if (!q->dir && q->buf && q->len)
++              memcpy(catc->ctrl_buf, q->buf, q->len);
++
++      if ((status = usb_submit_urb(catc->ctrl_urb, GFP_ATOMIC)))
++              dev_err(&catc->usbdev->dev, "submit(ctrl_urb) status %d\n",
++                      status);
++}
++
++static void catc_ctrl_done(struct urb *urb)
++{
++      struct catc *catc = urb->context;
++      struct ctrl_queue *q;
++      unsigned long flags;
++      int status = urb->status;
++
++      if (status)
++              dev_dbg(&urb->dev->dev, "ctrl_done, status %d, len %d.\n",
++                      status, urb->actual_length);
++
++      spin_lock_irqsave(&catc->ctrl_lock, flags);
++
++      q = catc->ctrl_queue + catc->ctrl_tail;
++
++      if (q->dir) {
++              if (q->buf && q->len)
++                      memcpy(q->buf, catc->ctrl_buf, q->len);
++              else
++                      q->buf = catc->ctrl_buf;
++      }
++
++      if (q->callback)
++              q->callback(catc, q);
++
++      catc->ctrl_tail = (catc->ctrl_tail + 1) & (CTRL_QUEUE - 1);
++
++      if (catc->ctrl_head != catc->ctrl_tail)
++              catc_ctrl_run(catc);
++      else
++              clear_bit(CTRL_RUNNING, &catc->flags);
++
++      spin_unlock_irqrestore(&catc->ctrl_lock, flags);
++}
++
++static int catc_ctrl_async(struct catc *catc, u8 dir, u8 request, u16 value,
++      u16 index, void *buf, int len, void (*callback)(struct catc *catc, struct ctrl_queue *q))
++{
++      struct ctrl_queue *q;
++      int retval = 0;
++      unsigned long flags;
++
++      spin_lock_irqsave(&catc->ctrl_lock, flags);
++      
++      q = catc->ctrl_queue + catc->ctrl_head;
++
++      q->dir = dir;
++      q->request = request;
++      q->value = value;
++      q->index = index;
++      q->buf = buf;
++      q->len = len;
++      q->callback = callback;
++
++      catc->ctrl_head = (catc->ctrl_head + 1) & (CTRL_QUEUE - 1);
++
++      if (catc->ctrl_head == catc->ctrl_tail) {
++              dev_err(&catc->usbdev->dev, "ctrl queue full\n");
++              catc->ctrl_tail = (catc->ctrl_tail + 1) & (CTRL_QUEUE - 1);
++              retval = -1;
++      }
++
++      if (!test_and_set_bit(CTRL_RUNNING, &catc->flags))
++              catc_ctrl_run(catc);
++
++      spin_unlock_irqrestore(&catc->ctrl_lock, flags);
++
++      return retval;
++}
++
++/*
++ * Statistics.
++ */
++
++static void catc_stats_done(struct catc *catc, struct ctrl_queue *q)
++{
++      int index = q->index - EthStats;
++      u16 data, last;
++
++      catc->stats_buf[index] = *((char *)q->buf);
++
++      if (index & 1)
++              return;
++
++      data = ((u16)catc->stats_buf[index] << 8) | catc->stats_buf[index + 1];
++      last = catc->stats_vals[index >> 1];
++
++      switch (index) {
++              case TxSingleColl:
++              case TxMultiColl:
++                      catc->netdev->stats.collisions += data - last;
++                      break;
++              case TxExcessColl:
++                      catc->netdev->stats.tx_aborted_errors += data - last;
++                      catc->netdev->stats.tx_errors += data - last;
++                      break;
++              case RxFramErr:
++                      catc->netdev->stats.rx_frame_errors += data - last;
++                      catc->netdev->stats.rx_errors += data - last;
++                      break;
++      }
++
++      catc->stats_vals[index >> 1] = data;
++}
++
++static void catc_stats_timer(unsigned long data)
++{
++      struct catc *catc = (void *) data;
++      int i;
++
++      for (i = 0; i < 8; i++)
++              catc_get_reg_async(catc, EthStats + 7 - i, catc_stats_done);
++
++      mod_timer(&catc->timer, jiffies + STATS_UPDATE);
++}
++
++/*
++ * Receive modes. Broadcast, Multicast, Promisc.
++ */
++
++static void catc_multicast(unsigned char *addr, u8 *multicast)
++{
++      u32 crc;
++
++      crc = ether_crc_le(6, addr);
++      multicast[(crc >> 3) & 0x3f] |= 1 << (crc & 7);
++}
++
++static void catc_set_multicast_list(struct net_device *netdev)
++{
++      struct catc *catc = netdev_priv(netdev);
++      struct netdev_hw_addr *ha;
++      u8 broadcast[ETH_ALEN];
++      u8 rx = RxEnable | RxPolarity | RxMultiCast;
++
++      memset(broadcast, 0xff, ETH_ALEN);
++      memset(catc->multicast, 0, 64);
++
++      catc_multicast(broadcast, catc->multicast);
++      catc_multicast(netdev->dev_addr, catc->multicast);
++
++      if (netdev->flags & IFF_PROMISC) {
++              memset(catc->multicast, 0xff, 64);
++              rx |= (!catc->is_f5u011) ? RxPromisc : AltRxPromisc;
++      } 
++
++      if (netdev->flags & IFF_ALLMULTI) {
++              memset(catc->multicast, 0xff, 64);
++      } else {
++              netdev_for_each_mc_addr(ha, netdev) {
++                      u32 crc = ether_crc_le(6, ha->addr);
++                      if (!catc->is_f5u011) {
++                              catc->multicast[(crc >> 3) & 0x3f] |= 1 << (crc & 7);
++                      } else {
++                              catc->multicast[7-(crc >> 29)] |= 1 << ((crc >> 26) & 7);
++                      }
++              }
++      }
++      if (!catc->is_f5u011) {
++              catc_set_reg_async(catc, RxUnit, rx);
++              catc_write_mem_async(catc, 0xfa80, catc->multicast, 64);
++      } else {
++              f5u011_mchash_async(catc, catc->multicast);
++              if (catc->rxmode[0] != rx) {
++                      catc->rxmode[0] = rx;
++                      netdev_dbg(catc->netdev,
++                                 "Setting RX mode to %2.2X %2.2X\n",
++                                 catc->rxmode[0], catc->rxmode[1]);
++                      f5u011_rxmode_async(catc, catc->rxmode);
++              }
++      }
++}
++
++static void catc_get_drvinfo(struct net_device *dev,
++                           struct ethtool_drvinfo *info)
++{
++      struct catc *catc = netdev_priv(dev);
++      strlcpy(info->driver, driver_name, sizeof(info->driver));
++      strlcpy(info->version, DRIVER_VERSION, sizeof(info->version));
++      usb_make_path(catc->usbdev, info->bus_info, sizeof(info->bus_info));
++}
++
++static int catc_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
++{
++      struct catc *catc = netdev_priv(dev);
++      if (!catc->is_f5u011)
++              return -EOPNOTSUPP;
++
++      cmd->supported = SUPPORTED_10baseT_Half | SUPPORTED_TP;
++      cmd->advertising = ADVERTISED_10baseT_Half | ADVERTISED_TP;
++      ethtool_cmd_speed_set(cmd, SPEED_10);
++      cmd->duplex = DUPLEX_HALF;
++      cmd->port = PORT_TP; 
++      cmd->phy_address = 0;
++      cmd->transceiver = XCVR_INTERNAL;
++      cmd->autoneg = AUTONEG_DISABLE;
++      cmd->maxtxpkt = 1;
++      cmd->maxrxpkt = 1;
++      return 0;
++}
++
++static const struct ethtool_ops ops = {
++      .get_drvinfo = catc_get_drvinfo,
++      .get_settings = catc_get_settings,
++      .get_link = ethtool_op_get_link
++};
++
++/*
++ * Open, close.
++ */
++
++static int catc_open(struct net_device *netdev)
++{
++      struct catc *catc = netdev_priv(netdev);
++      int status;
++
++      catc->irq_urb->dev = catc->usbdev;
++      if ((status = usb_submit_urb(catc->irq_urb, GFP_KERNEL)) < 0) {
++              dev_err(&catc->usbdev->dev, "submit(irq_urb) status %d\n",
++                      status);
++              return -1;
++      }
++
++      netif_start_queue(netdev);
++
++      if (!catc->is_f5u011)
++              mod_timer(&catc->timer, jiffies + STATS_UPDATE);
++
++      return 0;
++}
++
++static int catc_stop(struct net_device *netdev)
++{
++      struct catc *catc = netdev_priv(netdev);
++
++      netif_stop_queue(netdev);
++
++      if (!catc->is_f5u011)
++              del_timer_sync(&catc->timer);
++
++      usb_kill_urb(catc->rx_urb);
++      usb_kill_urb(catc->tx_urb);
++      usb_kill_urb(catc->irq_urb);
++      usb_kill_urb(catc->ctrl_urb);
++
++      return 0;
++}
++
++static const struct net_device_ops catc_netdev_ops = {
++      .ndo_open               = catc_open,
++      .ndo_stop               = catc_stop,
++      .ndo_start_xmit         = catc_start_xmit,
++
++      .ndo_tx_timeout         = catc_tx_timeout,
++      .ndo_set_rx_mode        = catc_set_multicast_list,
++      .ndo_change_mtu         = eth_change_mtu,
++      .ndo_set_mac_address    = eth_mac_addr,
++      .ndo_validate_addr      = eth_validate_addr,
++};
++
++/*
++ * USB probe, disconnect.
++ */
++
++static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id)
++{
++      struct device *dev = &intf->dev;
++      struct usb_device *usbdev = interface_to_usbdev(intf);
++      struct net_device *netdev;
++      struct catc *catc;
++      u8 broadcast[ETH_ALEN];
++      int i, pktsz;
++
++      if (usb_set_interface(usbdev,
++                      intf->altsetting->desc.bInterfaceNumber, 1)) {
++              dev_err(dev, "Can't set altsetting 1.\n");
++              return -EIO;
++      }
++
++      netdev = alloc_etherdev(sizeof(struct catc));
++      if (!netdev)
++              return -ENOMEM;
++
++      catc = netdev_priv(netdev);
++
++      netdev->netdev_ops = &catc_netdev_ops;
++      netdev->watchdog_timeo = TX_TIMEOUT;
++      netdev->ethtool_ops = &ops;
++
++      catc->usbdev = usbdev;
++      catc->netdev = netdev;
++
++      spin_lock_init(&catc->tx_lock);
++      spin_lock_init(&catc->ctrl_lock);
++
++      init_timer(&catc->timer);
++      catc->timer.data = (long) catc;
++      catc->timer.function = catc_stats_timer;
++
++      catc->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
++      catc->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
++      catc->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
++      catc->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
++      if ((!catc->ctrl_urb) || (!catc->tx_urb) || 
++          (!catc->rx_urb) || (!catc->irq_urb)) {
++              dev_err(&intf->dev, "No free urbs available.\n");
++              usb_free_urb(catc->ctrl_urb);
++              usb_free_urb(catc->tx_urb);
++              usb_free_urb(catc->rx_urb);
++              usb_free_urb(catc->irq_urb);
++              free_netdev(netdev);
++              return -ENOMEM;
++      }
++
++      /* The F5U011 has the same vendor/product as the netmate but a device version of 0x130 */
++      if (le16_to_cpu(usbdev->descriptor.idVendor) == 0x0423 && 
++          le16_to_cpu(usbdev->descriptor.idProduct) == 0xa &&
++          le16_to_cpu(catc->usbdev->descriptor.bcdDevice) == 0x0130) {
++              dev_dbg(dev, "Testing for f5u011\n");
++              catc->is_f5u011 = 1;            
++              atomic_set(&catc->recq_sz, 0);
++              pktsz = RX_PKT_SZ;
++      } else {
++              pktsz = RX_MAX_BURST * (PKT_SZ + 2);
++      }
++      
++      usb_fill_control_urb(catc->ctrl_urb, usbdev, usb_sndctrlpipe(usbdev, 0),
++              NULL, NULL, 0, catc_ctrl_done, catc);
++
++      usb_fill_bulk_urb(catc->tx_urb, usbdev, usb_sndbulkpipe(usbdev, 1),
++              NULL, 0, catc_tx_done, catc);
++
++      usb_fill_bulk_urb(catc->rx_urb, usbdev, usb_rcvbulkpipe(usbdev, 1),
++              catc->rx_buf, pktsz, catc_rx_done, catc);
++
++      usb_fill_int_urb(catc->irq_urb, usbdev, usb_rcvintpipe(usbdev, 2),
++                catc->irq_buf, 2, catc_irq_done, catc, 1);
++
++      if (!catc->is_f5u011) {
++              dev_dbg(dev, "Checking memory size\n");
++
++              i = 0x12345678;
++              catc_write_mem(catc, 0x7a80, &i, 4);
++              i = 0x87654321; 
++              catc_write_mem(catc, 0xfa80, &i, 4);
++              catc_read_mem(catc, 0x7a80, &i, 4);
++        
++              switch (i) {
++              case 0x12345678:
++                      catc_set_reg(catc, TxBufCount, 8);
++                      catc_set_reg(catc, RxBufCount, 32);
++                      dev_dbg(dev, "64k Memory\n");
++                      break;
++              default:
++                      dev_warn(&intf->dev,
++                               "Couldn't detect memory size, assuming 32k\n");
++              case 0x87654321:
++                      catc_set_reg(catc, TxBufCount, 4);
++                      catc_set_reg(catc, RxBufCount, 16);
++                      dev_dbg(dev, "32k Memory\n");
++                      break;
++              }
++        
++              dev_dbg(dev, "Getting MAC from SEEROM.\n");
++        
++              catc_get_mac(catc, netdev->dev_addr);
++              
++              dev_dbg(dev, "Setting MAC into registers.\n");
++        
++              for (i = 0; i < 6; i++)
++                      catc_set_reg(catc, StationAddr0 - i, netdev->dev_addr[i]);
++              
++              dev_dbg(dev, "Filling the multicast list.\n");
++        
++              memset(broadcast, 0xff, ETH_ALEN);
++              catc_multicast(broadcast, catc->multicast);
++              catc_multicast(netdev->dev_addr, catc->multicast);
++              catc_write_mem(catc, 0xfa80, catc->multicast, 64);
++              
++              dev_dbg(dev, "Clearing error counters.\n");
++              
++              for (i = 0; i < 8; i++)
++                      catc_set_reg(catc, EthStats + i, 0);
++              catc->last_stats = jiffies;
++              
++              dev_dbg(dev, "Enabling.\n");
++              
++              catc_set_reg(catc, MaxBurst, RX_MAX_BURST);
++              catc_set_reg(catc, OpModes, OpTxMerge | OpRxMerge | OpLenInclude | Op3MemWaits);
++              catc_set_reg(catc, LEDCtrl, LEDLink);
++              catc_set_reg(catc, RxUnit, RxEnable | RxPolarity | RxMultiCast);
++      } else {
++              dev_dbg(dev, "Performing reset\n");
++              catc_reset(catc);
++              catc_get_mac(catc, netdev->dev_addr);
++              
++              dev_dbg(dev, "Setting RX Mode\n");
++              catc->rxmode[0] = RxEnable | RxPolarity | RxMultiCast;
++              catc->rxmode[1] = 0;
++              f5u011_rxmode(catc, catc->rxmode);
++      }
++      dev_dbg(dev, "Init done.\n");
++      printk(KERN_INFO "%s: %s USB Ethernet at usb-%s-%s, %pM.\n",
++             netdev->name, (catc->is_f5u011) ? "Belkin F5U011" : "CATC EL1210A NetMate",
++             usbdev->bus->bus_name, usbdev->devpath, netdev->dev_addr);
++      usb_set_intfdata(intf, catc);
++
++      SET_NETDEV_DEV(netdev, &intf->dev);
++      if (register_netdev(netdev) != 0) {
++              usb_set_intfdata(intf, NULL);
++              usb_free_urb(catc->ctrl_urb);
++              usb_free_urb(catc->tx_urb);
++              usb_free_urb(catc->rx_urb);
++              usb_free_urb(catc->irq_urb);
++              free_netdev(netdev);
++              return -EIO;
++      }
++      return 0;
++}
++
++static void catc_disconnect(struct usb_interface *intf)
++{
++      struct catc *catc = usb_get_intfdata(intf);
++
++      usb_set_intfdata(intf, NULL);
++      if (catc) {
++              unregister_netdev(catc->netdev);
++              usb_free_urb(catc->ctrl_urb);
++              usb_free_urb(catc->tx_urb);
++              usb_free_urb(catc->rx_urb);
++              usb_free_urb(catc->irq_urb);
++              free_netdev(catc->netdev);
++      }
++}
++
++/*
++ * Module functions and tables.
++ */
++
++static struct usb_device_id catc_id_table [] = {
++      { USB_DEVICE(0x0423, 0xa) },    /* CATC Netmate, Belkin F5U011 */
++      { USB_DEVICE(0x0423, 0xc) },    /* CATC Netmate II, Belkin F5U111 */
++      { USB_DEVICE(0x08d1, 0x1) },    /* smartBridges smartNIC */
++      { }
++};
++
++MODULE_DEVICE_TABLE(usb, catc_id_table);
++
++static struct usb_driver catc_driver = {
++      .name =         driver_name,
++      .probe =        catc_probe,
++      .disconnect =   catc_disconnect,
++      .id_table =     catc_id_table,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(catc_driver);
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/cdc_eem.c backports-3.18.1-1/drivers/net/usb/cdc_eem.c
+--- backports-3.18.1-1.org/drivers/net/usb/cdc_eem.c   1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/cdc_eem.c       2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,381 @@
++/*
++ * USB CDC EEM network interface driver
++ * Copyright (C) 2009 Oberthur Technologies
++ * by Omar Laazimani, Olivier Condemine
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ctype.h>
++#include <linux/ethtool.h>
++#include <linux/workqueue.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/crc32.h>
++#include <linux/usb/cdc.h>
++#include <linux/usb/usbnet.h>
++#include <linux/gfp.h>
++#include <linux/if_vlan.h>
++
++
++/*
++ * This driver is an implementation of the CDC "Ethernet Emulation
++ * Model" (EEM) specification, which encapsulates Ethernet frames
++ * for transport over USB using a simpler USB device model than the
++ * previous CDC "Ethernet Control Model" (ECM, or "CDC Ethernet").
++ *
++ * For details, see www.usb.org/developers/devclass_docs/CDC_EEM10.pdf
++ *
++ * This version has been tested with GIGAntIC WuaoW SIM Smart Card on 2.6.24,
++ * 2.6.27 and 2.6.30rc2 kernel.
++ * It has also been validated on Openmoko Om 2008.12 (based on 2.6.24 kernel).
++ * build on 23-April-2009
++ */
++
++#define EEM_HEAD      2               /* 2 byte header */
++
++/*-------------------------------------------------------------------------*/
++
++static void eem_linkcmd_complete(struct urb *urb)
++{
++      dev_kfree_skb(urb->context);
++      usb_free_urb(urb);
++}
++
++static void eem_linkcmd(struct usbnet *dev, struct sk_buff *skb)
++{
++      struct urb              *urb;
++      int                     status;
++
++      urb = usb_alloc_urb(0, GFP_ATOMIC);
++      if (!urb)
++              goto fail;
++
++      usb_fill_bulk_urb(urb, dev->udev, dev->out,
++                      skb->data, skb->len, eem_linkcmd_complete, skb);
++
++      status = usb_submit_urb(urb, GFP_ATOMIC);
++      if (status) {
++              usb_free_urb(urb);
++fail:
++              dev_kfree_skb(skb);
++              netdev_warn(dev->net, "link cmd failure\n");
++              return;
++      }
++}
++
++static int eem_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      int status = 0;
++
++      status = usbnet_get_endpoints(dev, intf);
++      if (status < 0) {
++              usb_set_intfdata(intf, NULL);
++              usb_driver_release_interface(driver_of(intf), intf);
++              return status;
++      }
++
++      /* no jumbogram (16K) support for now */
++
++      dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN + VLAN_HLEN;
++      dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
++
++      return 0;
++}
++
++/*
++ * EEM permits packing multiple Ethernet frames into USB transfers
++ * (a "bundle"), but for TX we don't try to do that.
++ */
++static struct sk_buff *eem_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
++                                     gfp_t flags)
++{
++      struct sk_buff  *skb2 = NULL;
++      u16             len = skb->len;
++      u32             crc = 0;
++      int             padlen = 0;
++
++      /* When ((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket) is
++       * zero, stick two bytes of zero length EEM packet on the end.
++       * Else the framework would add invalid single byte padding,
++       * since it can't know whether ZLPs will be handled right by
++       * all the relevant hardware and software.
++       */
++      if (!((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket))
++              padlen += 2;
++
++      if (!skb_cloned(skb)) {
++              int     headroom = skb_headroom(skb);
++              int     tailroom = skb_tailroom(skb);
++
++              if ((tailroom >= ETH_FCS_LEN + padlen) &&
++                  (headroom >= EEM_HEAD))
++                      goto done;
++
++              if ((headroom + tailroom)
++                              > (EEM_HEAD + ETH_FCS_LEN + padlen)) {
++                      skb->data = memmove(skb->head +
++                                      EEM_HEAD,
++                                      skb->data,
++                                      skb->len);
++                      skb_set_tail_pointer(skb, len);
++                      goto done;
++              }
++      }
++
++      skb2 = skb_copy_expand(skb, EEM_HEAD, ETH_FCS_LEN + padlen, flags);
++      if (!skb2)
++              return NULL;
++
++      dev_kfree_skb_any(skb);
++      skb = skb2;
++
++done:
++      /* we don't use the "no Ethernet CRC" option */
++      crc = crc32_le(~0, skb->data, skb->len);
++      crc = ~crc;
++
++      put_unaligned_le32(crc, skb_put(skb, 4));
++
++      /* EEM packet header format:
++       * b0..13:      length of ethernet frame
++       * b14:         bmCRC (1 == valid Ethernet CRC)
++       * b15:         bmType (0 == data)
++       */
++      len = skb->len;
++      put_unaligned_le16(BIT(14) | len, skb_push(skb, 2));
++
++      /* Bundle a zero length EEM packet if needed */
++      if (padlen)
++              put_unaligned_le16(0, skb_put(skb, 2));
++
++      return skb;
++}
++
++static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
++{
++      /*
++       * Our task here is to strip off framing, leaving skb with one
++       * data frame for the usbnet framework code to process.  But we
++       * may have received multiple EEM payloads, or command payloads.
++       * So we must process _everything_ as if it's a header, except
++       * maybe the last data payload
++       *
++       * REVISIT the framework needs updating so that when we consume
++       * all payloads (the last or only message was a command, or a
++       * zero length EEM packet) that is not accounted as an rx_error.
++       */
++      do {
++              struct sk_buff  *skb2 = NULL;
++              u16             header;
++              u16             len = 0;
++
++              /* incomplete EEM header? */
++              if (skb->len < EEM_HEAD)
++                      return 0;
++
++              /*
++               * EEM packet header format:
++               * b0..14:      EEM type dependent (Data or Command)
++               * b15:         bmType
++               */
++              header = get_unaligned_le16(skb->data);
++              skb_pull(skb, EEM_HEAD);
++
++              /*
++               * The bmType bit helps to denote when EEM
++               * packet is data or command :
++               *      bmType = 0      : EEM data payload
++               *      bmType = 1      : EEM (link) command
++               */
++              if (header & BIT(15)) {
++                      u16     bmEEMCmd;
++
++                      /*
++                       * EEM (link) command packet:
++                       * b0..10:      bmEEMCmdParam
++                       * b11..13:     bmEEMCmd
++                       * b14:         bmReserved (must be 0)
++                       * b15:         1 (EEM command)
++                       */
++                      if (header & BIT(14)) {
++                              netdev_dbg(dev->net, "reserved command %04x\n",
++                                         header);
++                              continue;
++                      }
++
++                      bmEEMCmd = (header >> 11) & 0x7;
++                      switch (bmEEMCmd) {
++
++                      /* Responding to echo requests is mandatory. */
++                      case 0:         /* Echo command */
++                              len = header & 0x7FF;
++
++                              /* bogus command? */
++                              if (skb->len < len)
++                                      return 0;
++
++                              skb2 = skb_clone(skb, GFP_ATOMIC);
++                              if (unlikely(!skb2))
++                                      goto next;
++                              skb_trim(skb2, len);
++                              put_unaligned_le16(BIT(15) | (1 << 11) | len,
++                                              skb_push(skb2, 2));
++                              eem_linkcmd(dev, skb2);
++                              break;
++
++                      /*
++                       * Host may choose to ignore hints.
++                       *  - suspend: peripheral ready to suspend
++                       *  - response: suggest N millisec polling
++                       *  - response complete: suggest N sec polling
++                       *
++                       * Suspend is reported and maybe heeded.
++                       */
++                      case 2:         /* Suspend hint */
++                              usbnet_device_suggests_idle(dev);
++                              continue;
++                      case 3:         /* Response hint */
++                      case 4:         /* Response complete hint */
++                              continue;
++
++                      /*
++                       * Hosts should never receive host-to-peripheral
++                       * or reserved command codes; or responses to an
++                       * echo command we didn't send.
++                       */
++                      case 1:         /* Echo response */
++                      case 5:         /* Tickle */
++                      default:        /* reserved */
++                              netdev_warn(dev->net,
++                                          "unexpected link command %d\n",
++                                          bmEEMCmd);
++                              continue;
++                      }
++
++              } else {
++                      u32     crc, crc2;
++                      int     is_last;
++
++                      /* zero length EEM packet? */
++                      if (header == 0)
++                              continue;
++
++                      /*
++                       * EEM data packet header :
++                       * b0..13:      length of ethernet frame
++                       * b14:         bmCRC
++                       * b15:         0 (EEM data)
++                       */
++                      len = header & 0x3FFF;
++
++                      /* bogus EEM payload? */
++                      if (skb->len < len)
++                              return 0;
++
++                      /* bogus ethernet frame? */
++                      if (len < (ETH_HLEN + ETH_FCS_LEN))
++                              goto next;
++
++                      /*
++                       * Treat the last payload differently: framework
++                       * code expects our "fixup" to have stripped off
++                       * headers, so "skb" is a data packet (or error).
++                       * Else if it's not the last payload, keep "skb"
++                       * for further processing.
++                       */
++                      is_last = (len == skb->len);
++                      if (is_last)
++                              skb2 = skb;
++                      else {
++                              skb2 = skb_clone(skb, GFP_ATOMIC);
++                              if (unlikely(!skb2))
++                                      return 0;
++                      }
++
++                      /*
++                       * The bmCRC helps to denote when the CRC field in
++                       * the Ethernet frame contains a calculated CRC:
++                       *      bmCRC = 1       : CRC is calculated
++                       *      bmCRC = 0       : CRC = 0xDEADBEEF
++                       */
++                      if (header & BIT(14)) {
++                              crc = get_unaligned_le32(skb2->data
++                                              + len - ETH_FCS_LEN);
++                              crc2 = ~crc32_le(~0, skb2->data, skb2->len
++                                              - ETH_FCS_LEN);
++                      } else {
++                              crc = get_unaligned_be32(skb2->data
++                                              + len - ETH_FCS_LEN);
++                              crc2 = 0xdeadbeef;
++                      }
++                      skb_trim(skb2, len - ETH_FCS_LEN);
++
++                      if (is_last)
++                              return crc == crc2;
++
++                      if (unlikely(crc != crc2)) {
++                              dev->net->stats.rx_errors++;
++                              dev_kfree_skb_any(skb2);
++                      } else
++                              usbnet_skb_return(dev, skb2);
++              }
++
++next:
++              skb_pull(skb, len);
++      } while (skb->len);
++
++      return 1;
++}
++
++static const struct driver_info eem_info = {
++      .description =  "CDC EEM Device",
++      .flags =        FLAG_ETHER | FLAG_POINTTOPOINT,
++      .bind =         eem_bind,
++      .rx_fixup =     eem_rx_fixup,
++      .tx_fixup =     eem_tx_fixup,
++};
++
++/*-------------------------------------------------------------------------*/
++
++static const struct usb_device_id products[] = {
++{
++      USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_EEM,
++                      USB_CDC_PROTO_EEM),
++      .driver_info = (unsigned long) &eem_info,
++},
++{
++      /* EMPTY == end of list */
++},
++};
++MODULE_DEVICE_TABLE(usb, products);
++
++static struct usb_driver eem_driver = {
++      .name =         "cdc_eem",
++      .id_table =     products,
++      .probe =        usbnet_probe,
++      .disconnect =   usbnet_disconnect,
++      .suspend =      usbnet_suspend,
++      .resume =       usbnet_resume,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(eem_driver);
++
++MODULE_AUTHOR("Omar Laazimani <omar.oberthur@gmail.com>");
++MODULE_DESCRIPTION("USB CDC EEM");
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/cdc-phonet.c backports-3.18.1-1/drivers/net/usb/cdc-phonet.c
+--- backports-3.18.1-1.org/drivers/net/usb/cdc-phonet.c        1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/cdc-phonet.c    2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,466 @@
++/*
++ * phonet.c -- USB CDC Phonet host driver
++ *
++ * Copyright (C) 2008-2009 Nokia Corporation. All rights reserved.
++ *
++ * Author: Rémi Denis-Courmont
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
++ * 02110-1301 USA
++ */
++
++#include <linux/kernel.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/gfp.h>
++#include <linux/usb.h>
++#include <linux/usb/cdc.h>
++#include <linux/netdevice.h>
++#include <linux/if_arp.h>
++#include <linux/if_phonet.h>
++#include <linux/phonet.h>
++
++#define PN_MEDIA_USB  0x1B
++
++static const unsigned rxq_size = 17;
++
++struct usbpn_dev {
++      struct net_device       *dev;
++
++      struct usb_interface    *intf, *data_intf;
++      struct usb_device       *usb;
++      unsigned int            tx_pipe, rx_pipe;
++      u8 active_setting;
++      u8 disconnected;
++
++      unsigned                tx_queue;
++      spinlock_t              tx_lock;
++
++      spinlock_t              rx_lock;
++      struct sk_buff          *rx_skb;
++      struct urb              *urbs[0];
++};
++
++static void tx_complete(struct urb *req);
++static void rx_complete(struct urb *req);
++
++/*
++ * Network device callbacks
++ */
++static netdev_tx_t usbpn_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++      struct usbpn_dev *pnd = netdev_priv(dev);
++      struct urb *req = NULL;
++      unsigned long flags;
++      int err;
++
++      if (skb->protocol != htons(ETH_P_PHONET))
++              goto drop;
++
++      req = usb_alloc_urb(0, GFP_ATOMIC);
++      if (!req)
++              goto drop;
++      usb_fill_bulk_urb(req, pnd->usb, pnd->tx_pipe, skb->data, skb->len,
++                              tx_complete, skb);
++      req->transfer_flags = URB_ZERO_PACKET;
++      err = usb_submit_urb(req, GFP_ATOMIC);
++      if (err) {
++              usb_free_urb(req);
++              goto drop;
++      }
++
++      spin_lock_irqsave(&pnd->tx_lock, flags);
++      pnd->tx_queue++;
++      if (pnd->tx_queue >= dev->tx_queue_len)
++              netif_stop_queue(dev);
++      spin_unlock_irqrestore(&pnd->tx_lock, flags);
++      return NETDEV_TX_OK;
++
++drop:
++      dev_kfree_skb(skb);
++      dev->stats.tx_dropped++;
++      return NETDEV_TX_OK;
++}
++
++static void tx_complete(struct urb *req)
++{
++      struct sk_buff *skb = req->context;
++      struct net_device *dev = skb->dev;
++      struct usbpn_dev *pnd = netdev_priv(dev);
++      int status = req->status;
++
++      switch (status) {
++      case 0:
++              dev->stats.tx_bytes += skb->len;
++              break;
++
++      case -ENOENT:
++      case -ECONNRESET:
++      case -ESHUTDOWN:
++              dev->stats.tx_aborted_errors++;
++      default:
++              dev->stats.tx_errors++;
++              dev_dbg(&dev->dev, "TX error (%d)\n", status);
++      }
++      dev->stats.tx_packets++;
++
++      spin_lock(&pnd->tx_lock);
++      pnd->tx_queue--;
++      netif_wake_queue(dev);
++      spin_unlock(&pnd->tx_lock);
++
++      dev_kfree_skb_any(skb);
++      usb_free_urb(req);
++}
++
++static int rx_submit(struct usbpn_dev *pnd, struct urb *req, gfp_t gfp_flags)
++{
++      struct net_device *dev = pnd->dev;
++      struct page *page;
++      int err;
++
++      page = __skb_alloc_page(gfp_flags | __GFP_NOMEMALLOC, NULL);
++      if (!page)
++              return -ENOMEM;
++
++      usb_fill_bulk_urb(req, pnd->usb, pnd->rx_pipe, page_address(page),
++                              PAGE_SIZE, rx_complete, dev);
++      req->transfer_flags = 0;
++      err = usb_submit_urb(req, gfp_flags);
++      if (unlikely(err)) {
++              dev_dbg(&dev->dev, "RX submit error (%d)\n", err);
++              put_page(page);
++      }
++      return err;
++}
++
++static void rx_complete(struct urb *req)
++{
++      struct net_device *dev = req->context;
++      struct usbpn_dev *pnd = netdev_priv(dev);
++      struct page *page = virt_to_page(req->transfer_buffer);
++      struct sk_buff *skb;
++      unsigned long flags;
++      int status = req->status;
++
++      switch (status) {
++      case 0:
++              spin_lock_irqsave(&pnd->rx_lock, flags);
++              skb = pnd->rx_skb;
++              if (!skb) {
++                      skb = pnd->rx_skb = netdev_alloc_skb(dev, 12);
++                      if (likely(skb)) {
++                              /* Can't use pskb_pull() on page in IRQ */
++                              memcpy(skb_put(skb, 1), page_address(page), 1);
++                              skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
++                                              page, 1, req->actual_length,
++                                              PAGE_SIZE);
++                              page = NULL;
++                      }
++              } else {
++                      skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
++                                      page, 0, req->actual_length,
++                                      PAGE_SIZE);
++                      page = NULL;
++              }
++              if (req->actual_length < PAGE_SIZE)
++                      pnd->rx_skb = NULL; /* Last fragment */
++              else
++                      skb = NULL;
++              spin_unlock_irqrestore(&pnd->rx_lock, flags);
++              if (skb) {
++                      skb->protocol = htons(ETH_P_PHONET);
++                      skb_reset_mac_header(skb);
++                      __skb_pull(skb, 1);
++                      skb->dev = dev;
++                      dev->stats.rx_packets++;
++                      dev->stats.rx_bytes += skb->len;
++
++                      netif_rx(skb);
++              }
++              goto resubmit;
++
++      case -ENOENT:
++      case -ECONNRESET:
++      case -ESHUTDOWN:
++              req = NULL;
++              break;
++
++      case -EOVERFLOW:
++              dev->stats.rx_over_errors++;
++              dev_dbg(&dev->dev, "RX overflow\n");
++              break;
++
++      case -EILSEQ:
++              dev->stats.rx_crc_errors++;
++              break;
++      }
++
++      dev->stats.rx_errors++;
++resubmit:
++      if (page)
++              put_page(page);
++      if (req)
++              rx_submit(pnd, req, GFP_ATOMIC | __GFP_COLD);
++}
++
++static int usbpn_close(struct net_device *dev);
++
++static int usbpn_open(struct net_device *dev)
++{
++      struct usbpn_dev *pnd = netdev_priv(dev);
++      int err;
++      unsigned i;
++      unsigned num = pnd->data_intf->cur_altsetting->desc.bInterfaceNumber;
++
++      err = usb_set_interface(pnd->usb, num, pnd->active_setting);
++      if (err)
++              return err;
++
++      for (i = 0; i < rxq_size; i++) {
++              struct urb *req = usb_alloc_urb(0, GFP_KERNEL);
++
++              if (!req || rx_submit(pnd, req, GFP_KERNEL | __GFP_COLD)) {
++                      usb_free_urb(req);
++                      usbpn_close(dev);
++                      return -ENOMEM;
++              }
++              pnd->urbs[i] = req;
++      }
++
++      netif_wake_queue(dev);
++      return 0;
++}
++
++static int usbpn_close(struct net_device *dev)
++{
++      struct usbpn_dev *pnd = netdev_priv(dev);
++      unsigned i;
++      unsigned num = pnd->data_intf->cur_altsetting->desc.bInterfaceNumber;
++
++      netif_stop_queue(dev);
++
++      for (i = 0; i < rxq_size; i++) {
++              struct urb *req = pnd->urbs[i];
++
++              if (!req)
++                      continue;
++              usb_kill_urb(req);
++              usb_free_urb(req);
++              pnd->urbs[i] = NULL;
++      }
++
++      return usb_set_interface(pnd->usb, num, !pnd->active_setting);
++}
++
++static int usbpn_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
++{
++      struct if_phonet_req *req = (struct if_phonet_req *)ifr;
++
++      switch (cmd) {
++      case SIOCPNGAUTOCONF:
++              req->ifr_phonet_autoconf.device = PN_DEV_PC;
++              return 0;
++      }
++      return -ENOIOCTLCMD;
++}
++
++static int usbpn_set_mtu(struct net_device *dev, int new_mtu)
++{
++      if ((new_mtu < PHONET_MIN_MTU) || (new_mtu > PHONET_MAX_MTU))
++              return -EINVAL;
++
++      dev->mtu = new_mtu;
++      return 0;
++}
++
++static const struct net_device_ops usbpn_ops = {
++      .ndo_open       = usbpn_open,
++      .ndo_stop       = usbpn_close,
++      .ndo_start_xmit = usbpn_xmit,
++      .ndo_do_ioctl   = usbpn_ioctl,
++      .ndo_change_mtu = usbpn_set_mtu,
++};
++
++static void usbpn_setup(struct net_device *dev)
++{
++      dev->features           = 0;
++      dev->netdev_ops         = &usbpn_ops,
++      dev->header_ops         = &phonet_header_ops;
++      dev->type               = ARPHRD_PHONET;
++      dev->flags              = IFF_POINTOPOINT | IFF_NOARP;
++      dev->mtu                = PHONET_MAX_MTU;
++      dev->hard_header_len    = 1;
++      dev->dev_addr[0]        = PN_MEDIA_USB;
++      dev->addr_len           = 1;
++      dev->tx_queue_len       = 3;
++
++      dev->destructor         = free_netdev;
++}
++
++/*
++ * USB driver callbacks
++ */
++static struct usb_device_id usbpn_ids[] = {
++      {
++              .match_flags = USB_DEVICE_ID_MATCH_VENDOR
++                      | USB_DEVICE_ID_MATCH_INT_CLASS
++                      | USB_DEVICE_ID_MATCH_INT_SUBCLASS,
++              .idVendor = 0x0421, /* Nokia */
++              .bInterfaceClass = USB_CLASS_COMM,
++              .bInterfaceSubClass = 0xFE,
++      },
++      { },
++};
++
++MODULE_DEVICE_TABLE(usb, usbpn_ids);
++
++static struct usb_driver usbpn_driver;
++
++static int usbpn_probe(struct usb_interface *intf, const struct usb_device_id *id)
++{
++      static const char ifname[] = "usbpn%d";
++      const struct usb_cdc_union_desc *union_header = NULL;
++      const struct usb_host_interface *data_desc;
++      struct usb_interface *data_intf;
++      struct usb_device *usbdev = interface_to_usbdev(intf);
++      struct net_device *dev;
++      struct usbpn_dev *pnd;
++      u8 *data;
++      int phonet = 0;
++      int len, err;
++
++      data = intf->altsetting->extra;
++      len = intf->altsetting->extralen;
++      while (len >= 3) {
++              u8 dlen = data[0];
++              if (dlen < 3)
++                      return -EINVAL;
++
++              /* bDescriptorType */
++              if (data[1] == USB_DT_CS_INTERFACE) {
++                      /* bDescriptorSubType */
++                      switch (data[2]) {
++                      case USB_CDC_UNION_TYPE:
++                              if (union_header || dlen < 5)
++                                      break;
++                              union_header =
++                                      (struct usb_cdc_union_desc *)data;
++                              break;
++                      case 0xAB:
++                              phonet = 1;
++                              break;
++                      }
++              }
++              data += dlen;
++              len -= dlen;
++      }
++
++      if (!union_header || !phonet)
++              return -EINVAL;
++
++      data_intf = usb_ifnum_to_if(usbdev, union_header->bSlaveInterface0);
++      if (data_intf == NULL)
++              return -ENODEV;
++      /* Data interface has one inactive and one active setting */
++      if (data_intf->num_altsetting != 2)
++              return -EINVAL;
++      if (data_intf->altsetting[0].desc.bNumEndpoints == 0 &&
++          data_intf->altsetting[1].desc.bNumEndpoints == 2)
++              data_desc = data_intf->altsetting + 1;
++      else
++      if (data_intf->altsetting[0].desc.bNumEndpoints == 2 &&
++          data_intf->altsetting[1].desc.bNumEndpoints == 0)
++              data_desc = data_intf->altsetting;
++      else
++              return -EINVAL;
++
++      dev = alloc_netdev(sizeof(*pnd) + sizeof(pnd->urbs[0]) * rxq_size,
++                         ifname, NET_NAME_UNKNOWN, usbpn_setup);
++      if (!dev)
++              return -ENOMEM;
++
++      pnd = netdev_priv(dev);
++      SET_NETDEV_DEV(dev, &intf->dev);
++
++      pnd->dev = dev;
++      pnd->usb = usbdev;
++      pnd->intf = intf;
++      pnd->data_intf = data_intf;
++      spin_lock_init(&pnd->tx_lock);
++      spin_lock_init(&pnd->rx_lock);
++      /* Endpoints */
++      if (usb_pipein(data_desc->endpoint[0].desc.bEndpointAddress)) {
++              pnd->rx_pipe = usb_rcvbulkpipe(usbdev,
++                      data_desc->endpoint[0].desc.bEndpointAddress);
++              pnd->tx_pipe = usb_sndbulkpipe(usbdev,
++                      data_desc->endpoint[1].desc.bEndpointAddress);
++      } else {
++              pnd->rx_pipe = usb_rcvbulkpipe(usbdev,
++                      data_desc->endpoint[1].desc.bEndpointAddress);
++              pnd->tx_pipe = usb_sndbulkpipe(usbdev,
++                      data_desc->endpoint[0].desc.bEndpointAddress);
++      }
++      pnd->active_setting = data_desc - data_intf->altsetting;
++
++      err = usb_driver_claim_interface(&usbpn_driver, data_intf, pnd);
++      if (err)
++              goto out;
++
++      /* Force inactive mode until the network device is brought UP */
++      usb_set_interface(usbdev, union_header->bSlaveInterface0,
++                              !pnd->active_setting);
++      usb_set_intfdata(intf, pnd);
++
++      err = register_netdev(dev);
++      if (err) {
++              usb_driver_release_interface(&usbpn_driver, data_intf);
++              goto out;
++      }
++
++      dev_dbg(&dev->dev, "USB CDC Phonet device found\n");
++      return 0;
++
++out:
++      usb_set_intfdata(intf, NULL);
++      free_netdev(dev);
++      return err;
++}
++
++static void usbpn_disconnect(struct usb_interface *intf)
++{
++      struct usbpn_dev *pnd = usb_get_intfdata(intf);
++
++      if (pnd->disconnected)
++              return;
++
++      pnd->disconnected = 1;
++      usb_driver_release_interface(&usbpn_driver,
++                      (pnd->intf == intf) ? pnd->data_intf : pnd->intf);
++      unregister_netdev(pnd->dev);
++}
++
++static struct usb_driver usbpn_driver = {
++      .name =         "cdc_phonet",
++      .probe =        usbpn_probe,
++      .disconnect =   usbpn_disconnect,
++      .id_table =     usbpn_ids,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(usbpn_driver);
++
++MODULE_AUTHOR("Remi Denis-Courmont");
++MODULE_DESCRIPTION("USB CDC Phonet host interface");
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/cdc_subset.c backports-3.18.1-1/drivers/net/usb/cdc_subset.c
+--- backports-3.18.1-1.org/drivers/net/usb/cdc_subset.c        1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/cdc_subset.c    2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,369 @@
++/*
++ * Simple "CDC Subset" USB Networking Links
++ * Copyright (C) 2000-2005 by David Brownell
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/module.h>
++#include <linux/kmod.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/workqueue.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/usb/usbnet.h>
++
++
++/*
++ * This supports simple USB network links that don't require any special
++ * framing or hardware control operations.  The protocol used here is a
++ * strict subset of CDC Ethernet, with three basic differences reflecting
++ * the goal that almost any hardware should run it:
++ *
++ *  - Minimal runtime control:  one interface, no altsettings, and
++ *    no vendor or class specific control requests.  If a device is
++ *    configured, it is allowed to exchange packets with the host.
++ *    Fancier models would mean not working on some hardware.
++ *
++ *  - Minimal manufacturing control:  no IEEE "Organizationally
++ *    Unique ID" required, or an EEPROMs to store one.  Each host uses
++ *    one random "locally assigned" Ethernet address instead, which can
++ *    of course be overridden using standard tools like "ifconfig".
++ *    (With 2^46 such addresses, same-net collisions are quite rare.)
++ *
++ *  - There is no additional framing data for USB.  Packets are written
++ *    exactly as in CDC Ethernet, starting with an Ethernet header and
++ *    terminated by a short packet.  However, the host will never send a
++ *    zero length packet; some systems can't handle those robustly.
++ *
++ * Anything that can transmit and receive USB bulk packets can implement
++ * this protocol.  That includes both smart peripherals and quite a lot
++ * of "host-to-host" USB cables (which embed two devices back-to-back).
++ *
++ * Note that although Linux may use many of those host-to-host links
++ * with this "cdc_subset" framing, that doesn't mean there may not be a
++ * better approach.  Handling the "other end unplugs/replugs" scenario
++ * well tends to require chip-specific vendor requests.  Also, Windows
++ * peers at the other end of host-to-host cables may expect their own
++ * framing to be used rather than this "cdc_subset" model.
++ */
++
++#if defined(CONFIG_USB_EPSON2888) || defined(CONFIG_USB_ARMLINUX)
++/* PDA style devices are always connected if present */
++static int always_connected (struct usbnet *dev)
++{
++      return 0;
++}
++#endif
++
++#ifdef        CONFIG_USB_ALI_M5632
++#define       HAVE_HARDWARE
++
++/*-------------------------------------------------------------------------
++ *
++ * ALi M5632 driver ... does high speed
++ *
++ * NOTE that the MS-Windows drivers for this chip use some funky and
++ * (naturally) undocumented 7-byte prefix to each packet, so this is a
++ * case where we don't currently interoperate.  Also, once you unplug
++ * one end of the cable, you need to replug the other end too ... since
++ * chip docs are unavailable, there's no way to reset the relevant state
++ * short of a power cycle.
++ *
++ *-------------------------------------------------------------------------*/
++
++static void m5632_recover(struct usbnet *dev)
++{
++      struct usb_device       *udev = dev->udev;
++      struct usb_interface    *intf = dev->intf;
++      int r;
++
++      r = usb_lock_device_for_reset(udev, intf);
++      if (r < 0)
++              return;
++
++      usb_reset_device(udev);
++      usb_unlock_device(udev);
++}
++
++static const struct driver_info       ali_m5632_info = {
++      .description =  "ALi M5632",
++      .flags       = FLAG_POINTTOPOINT,
++      .recover     = m5632_recover,
++};
++
++#endif
++
++#ifdef        CONFIG_USB_AN2720
++#define       HAVE_HARDWARE
++
++/*-------------------------------------------------------------------------
++ *
++ * AnchorChips 2720 driver ... http://www.cypress.com
++ *
++ * This doesn't seem to have a way to detect whether the peer is
++ * connected, or need any reset handshaking.  It's got pretty big
++ * internal buffers (handles most of a frame's worth of data).
++ * Chip data sheets don't describe any vendor control messages.
++ *
++ *-------------------------------------------------------------------------*/
++
++static const struct driver_info       an2720_info = {
++      .description =  "AnchorChips/Cypress 2720",
++      .flags       = FLAG_POINTTOPOINT,
++      // no reset available!
++      // no check_connect available!
++
++      .in = 2, .out = 2,              // direction distinguishes these
++};
++
++#endif        /* CONFIG_USB_AN2720 */
++
++\f
++#ifdef        CONFIG_USB_BELKIN
++#define       HAVE_HARDWARE
++
++/*-------------------------------------------------------------------------
++ *
++ * Belkin F5U104 ... two NetChip 2280 devices + Atmel AVR microcontroller
++ *
++ * ... also two eTEK designs, including one sold as "Advance USBNET"
++ *
++ *-------------------------------------------------------------------------*/
++
++static const struct driver_info       belkin_info = {
++      .description =  "Belkin, eTEK, or compatible",
++      .flags       = FLAG_POINTTOPOINT,
++};
++
++#endif        /* CONFIG_USB_BELKIN */
++
++
++\f
++#ifdef        CONFIG_USB_EPSON2888
++#define       HAVE_HARDWARE
++
++/*-------------------------------------------------------------------------
++ *
++ * EPSON USB clients
++ *
++ * This is the same idea as Linux PDAs (below) except the firmware in the
++ * device might not be Tux-powered.  Epson provides reference firmware that
++ * implements this interface.  Product developers can reuse or modify that
++ * code, such as by using their own product and vendor codes.
++ *
++ * Support was from Juro Bystricky <bystricky.juro@erd.epson.com>
++ *
++ *-------------------------------------------------------------------------*/
++
++static const struct driver_info       epson2888_info = {
++      .description =  "Epson USB Device",
++      .check_connect = always_connected,
++      .flags = FLAG_POINTTOPOINT,
++
++      .in = 4, .out = 3,
++};
++
++#endif        /* CONFIG_USB_EPSON2888 */
++
++\f
++/*-------------------------------------------------------------------------
++ *
++ * info from Jonathan McDowell <noodles@earth.li>
++ *
++ *-------------------------------------------------------------------------*/
++#ifdef CONFIG_USB_KC2190
++#define HAVE_HARDWARE
++static const struct driver_info kc2190_info = {
++      .description =  "KC Technology KC-190",
++      .flags = FLAG_POINTTOPOINT,
++};
++#endif /* CONFIG_USB_KC2190 */
++
++\f
++#ifdef        CONFIG_USB_ARMLINUX
++#define       HAVE_HARDWARE
++
++/*-------------------------------------------------------------------------
++ *
++ * Intel's SA-1100 chip integrates basic USB support, and is used
++ * in PDAs like some iPaqs, the Yopy, some Zaurus models, and more.
++ * When they run Linux, arch/arm/mach-sa1100/usb-eth.c may be used to
++ * network using minimal USB framing data.
++ *
++ * This describes the driver currently in standard ARM Linux kernels.
++ * The Zaurus uses a different driver (see later).
++ *
++ * PXA25x and PXA210 use XScale cores (ARM v5TE) with better USB support
++ * and different USB endpoint numbering than the SA1100 devices.  The
++ * mach-pxa/usb-eth.c driver re-uses the device ids from mach-sa1100
++ * so we rely on the endpoint descriptors.
++ *
++ *-------------------------------------------------------------------------*/
++
++static const struct driver_info       linuxdev_info = {
++      .description =  "Linux Device",
++      .check_connect = always_connected,
++      .flags = FLAG_POINTTOPOINT,
++};
++
++static const struct driver_info       yopy_info = {
++      .description =  "Yopy",
++      .check_connect = always_connected,
++      .flags = FLAG_POINTTOPOINT,
++};
++
++static const struct driver_info       blob_info = {
++      .description =  "Boot Loader OBject",
++      .check_connect = always_connected,
++      .flags = FLAG_POINTTOPOINT,
++};
++
++#endif        /* CONFIG_USB_ARMLINUX */
++
++\f
++/*-------------------------------------------------------------------------*/
++
++#ifndef       HAVE_HARDWARE
++#warning You need to configure some hardware for this driver
++#endif
++
++/*
++ * chip vendor names won't normally be on the cables, and
++ * may not be on the device.
++ */
++
++static const struct usb_device_id     products [] = {
++
++#ifdef        CONFIG_USB_ALI_M5632
++{
++      USB_DEVICE (0x0402, 0x5632),    // ALi defaults
++      .driver_info =  (unsigned long) &ali_m5632_info,
++},
++{
++      USB_DEVICE (0x182d,0x207c),     // SiteCom CN-124
++      .driver_info =  (unsigned long) &ali_m5632_info,
++},
++#endif
++
++#ifdef        CONFIG_USB_AN2720
++{
++      USB_DEVICE (0x0547, 0x2720),    // AnchorChips defaults
++      .driver_info =  (unsigned long) &an2720_info,
++}, {
++      USB_DEVICE (0x0547, 0x2727),    // Xircom PGUNET
++      .driver_info =  (unsigned long) &an2720_info,
++},
++#endif
++
++#ifdef        CONFIG_USB_BELKIN
++{
++      USB_DEVICE (0x050d, 0x0004),    // Belkin
++      .driver_info =  (unsigned long) &belkin_info,
++}, {
++      USB_DEVICE (0x056c, 0x8100),    // eTEK
++      .driver_info =  (unsigned long) &belkin_info,
++}, {
++      USB_DEVICE (0x0525, 0x9901),    // Advance USBNET (eTEK)
++      .driver_info =  (unsigned long) &belkin_info,
++},
++#endif
++
++#ifdef        CONFIG_USB_EPSON2888
++{
++      USB_DEVICE (0x0525, 0x2888),    // EPSON USB client
++      .driver_info    = (unsigned long) &epson2888_info,
++},
++#endif
++
++#ifdef CONFIG_USB_KC2190
++{
++      USB_DEVICE (0x050f, 0x0190),    // KC-190
++      .driver_info =  (unsigned long) &kc2190_info,
++},
++#endif
++
++#ifdef        CONFIG_USB_ARMLINUX
++/*
++ * SA-1100 using standard ARM Linux kernels, or compatible.
++ * Often used when talking to Linux PDAs (iPaq, Yopy, etc).
++ * The sa-1100 "usb-eth" driver handles the basic framing.
++ *
++ * PXA25x or PXA210 ...  these use a "usb-eth" driver much like
++ * the sa1100 one, but hardware uses different endpoint numbers.
++ *
++ * Or the Linux "Ethernet" gadget on hardware that can't talk
++ * CDC Ethernet (e.g., no altsettings), in either of two modes:
++ *  - acting just like the old "usb-eth" firmware, though
++ *    the implementation is different
++ *  - supporting RNDIS as the first/default configuration for
++ *    MS-Windows interop; Linux needs to use the other config
++ */
++{
++      // 1183 = 0x049F, both used as hex values?
++      // Compaq "Itsy" vendor/product id
++      USB_DEVICE (0x049F, 0x505A),    // usb-eth, or compatible
++      .driver_info =  (unsigned long) &linuxdev_info,
++}, {
++      USB_DEVICE (0x0E7E, 0x1001),    // G.Mate "Yopy"
++      .driver_info =  (unsigned long) &yopy_info,
++}, {
++      USB_DEVICE (0x8086, 0x07d3),    // "blob" bootloader
++      .driver_info =  (unsigned long) &blob_info,
++}, {
++      USB_DEVICE (0x1286, 0x8001),    // "blob" bootloader
++      .driver_info =  (unsigned long) &blob_info,
++}, {
++      // Linux Ethernet/RNDIS gadget, mostly on PXA, second config
++      // e.g. Gumstix, current OpenZaurus, ... or anything else
++      // that just enables this gadget option.
++      USB_DEVICE (0x0525, 0xa4a2),
++      .driver_info =  (unsigned long) &linuxdev_info,
++},
++#endif
++
++      { },            // END
++};
++MODULE_DEVICE_TABLE(usb, products);
++
++/*-------------------------------------------------------------------------*/
++static int dummy_prereset(struct usb_interface *intf)
++{
++        return 0;
++}
++
++static int dummy_postreset(struct usb_interface *intf)
++{
++        return 0;
++}
++
++static struct usb_driver cdc_subset_driver = {
++      .name =         "cdc_subset",
++      .probe =        usbnet_probe,
++      .suspend =      usbnet_suspend,
++      .resume =       usbnet_resume,
++      .pre_reset =    dummy_prereset,
++      .post_reset =   dummy_postreset,
++      .disconnect =   usbnet_disconnect,
++      .id_table =     products,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(cdc_subset_driver);
++
++MODULE_AUTHOR("David Brownell");
++MODULE_DESCRIPTION("Simple 'CDC Subset' USB networking links");
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/cx82310_eth.c backports-3.18.1-1/drivers/net/usb/cx82310_eth.c
+--- backports-3.18.1-1.org/drivers/net/usb/cx82310_eth.c       1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/cx82310_eth.c   2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,326 @@
++/*
++ * Driver for USB ethernet port of Conexant CX82310-based ADSL routers
++ * Copyright (C) 2010 by Ondrej Zary
++ * some parts inspired by the cxacru driver
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/workqueue.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/usb/usbnet.h>
++
++enum cx82310_cmd {
++      CMD_START               = 0x84, /* no effect? */
++      CMD_STOP                = 0x85, /* no effect? */
++      CMD_GET_STATUS          = 0x90, /* returns nothing? */
++      CMD_GET_MAC_ADDR        = 0x91, /* read MAC address */
++      CMD_GET_LINK_STATUS     = 0x92, /* not useful, link is always up */
++      CMD_ETHERNET_MODE       = 0x99, /* unknown, needed during init */
++};
++
++enum cx82310_status {
++      STATUS_UNDEFINED,
++      STATUS_SUCCESS,
++      STATUS_ERROR,
++      STATUS_UNSUPPORTED,
++      STATUS_UNIMPLEMENTED,
++      STATUS_PARAMETER_ERROR,
++      STATUS_DBG_LOOPBACK,
++};
++
++#define CMD_PACKET_SIZE       64
++/* first command after power on can take around 8 seconds */
++#define CMD_TIMEOUT   15000
++#define CMD_REPLY_RETRY 5
++
++#define CX82310_MTU   1514
++#define CMD_EP                0x01
++
++/*
++ * execute control command
++ *  - optionally send some data (command parameters)
++ *  - optionally wait for the reply
++ *  - optionally read some data from the reply
++ */
++static int cx82310_cmd(struct usbnet *dev, enum cx82310_cmd cmd, bool reply,
++                     u8 *wdata, int wlen, u8 *rdata, int rlen)
++{
++      int actual_len, retries, ret;
++      struct usb_device *udev = dev->udev;
++      u8 *buf = kzalloc(CMD_PACKET_SIZE, GFP_KERNEL);
++
++      if (!buf)
++              return -ENOMEM;
++
++      /* create command packet */
++      buf[0] = cmd;
++      if (wdata)
++              memcpy(buf + 4, wdata, min_t(int, wlen, CMD_PACKET_SIZE - 4));
++
++      /* send command packet */
++      ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, CMD_EP), buf,
++                         CMD_PACKET_SIZE, &actual_len, CMD_TIMEOUT);
++      if (ret < 0) {
++              dev_err(&dev->udev->dev, "send command %#x: error %d\n",
++                      cmd, ret);
++              goto end;
++      }
++
++      if (reply) {
++              /* wait for reply, retry if it's empty */
++              for (retries = 0; retries < CMD_REPLY_RETRY; retries++) {
++                      ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, CMD_EP),
++                                         buf, CMD_PACKET_SIZE, &actual_len,
++                                         CMD_TIMEOUT);
++                      if (ret < 0) {
++                              dev_err(&dev->udev->dev,
++                                      "reply receive error %d\n", ret);
++                              goto end;
++                      }
++                      if (actual_len > 0)
++                              break;
++              }
++              if (actual_len == 0) {
++                      dev_err(&dev->udev->dev, "no reply to command %#x\n",
++                              cmd);
++                      ret = -EIO;
++                      goto end;
++              }
++              if (buf[0] != cmd) {
++                      dev_err(&dev->udev->dev,
++                              "got reply to command %#x, expected: %#x\n",
++                              buf[0], cmd);
++                      ret = -EIO;
++                      goto end;
++              }
++              if (buf[1] != STATUS_SUCCESS) {
++                      dev_err(&dev->udev->dev, "command %#x failed: %#x\n",
++                              cmd, buf[1]);
++                      ret = -EIO;
++                      goto end;
++              }
++              if (rdata)
++                      memcpy(rdata, buf + 4,
++                             min_t(int, rlen, CMD_PACKET_SIZE - 4));
++      }
++end:
++      kfree(buf);
++      return ret;
++}
++
++#define partial_len   data[0]         /* length of partial packet data */
++#define partial_rem   data[1]         /* remaining (missing) data length */
++#define partial_data  data[2]         /* partial packet data */
++
++static int cx82310_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      int ret;
++      char buf[15];
++      struct usb_device *udev = dev->udev;
++
++      /* avoid ADSL modems - continue only if iProduct is "USB NET CARD" */
++      if (usb_string(udev, udev->descriptor.iProduct, buf, sizeof(buf)) > 0
++          && strcmp(buf, "USB NET CARD")) {
++              dev_info(&udev->dev, "ignoring: probably an ADSL modem\n");
++              return -ENODEV;
++      }
++
++      ret = usbnet_get_endpoints(dev, intf);
++      if (ret)
++              return ret;
++
++      /*
++       * this must not include ethernet header as the device can send partial
++       * packets with no header (and sometimes even empty URBs)
++       */
++      dev->net->hard_header_len = 0;
++      /* we can send at most 1514 bytes of data (+ 2-byte header) per URB */
++      dev->hard_mtu = CX82310_MTU + 2;
++      /* we can receive URBs up to 4KB from the device */
++      dev->rx_urb_size = 4096;
++
++      dev->partial_data = (unsigned long) kmalloc(dev->hard_mtu, GFP_KERNEL);
++      if (!dev->partial_data)
++              return -ENOMEM;
++
++      /* enable ethernet mode (?) */
++      ret = cx82310_cmd(dev, CMD_ETHERNET_MODE, true, "\x01", 1, NULL, 0);
++      if (ret) {
++              dev_err(&udev->dev, "unable to enable ethernet mode: %d\n",
++                      ret);
++              goto err;
++      }
++
++      /* get the MAC address */
++      ret = cx82310_cmd(dev, CMD_GET_MAC_ADDR, true, NULL, 0,
++                        dev->net->dev_addr, ETH_ALEN);
++      if (ret) {
++              dev_err(&udev->dev, "unable to read MAC address: %d\n", ret);
++              goto err;
++      }
++
++      /* start (does not seem to have any effect?) */
++      ret = cx82310_cmd(dev, CMD_START, false, NULL, 0, NULL, 0);
++      if (ret)
++              goto err;
++
++      return 0;
++err:
++      kfree((void *)dev->partial_data);
++      return ret;
++}
++
++static void cx82310_unbind(struct usbnet *dev, struct usb_interface *intf)
++{
++      kfree((void *)dev->partial_data);
++}
++
++/*
++ * RX is NOT easy - we can receive multiple packets per skb, each having 2-byte
++ * packet length at the beginning.
++ * The last packet might be incomplete (when it crosses the 4KB URB size),
++ * continuing in the next skb (without any headers).
++ * If a packet has odd length, there is one extra byte at the end (before next
++ * packet or at the end of the URB).
++ */
++static int cx82310_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
++{
++      int len;
++      struct sk_buff *skb2;
++
++      /*
++       * If the last skb ended with an incomplete packet, this skb contains
++       * end of that packet at the beginning.
++       */
++      if (dev->partial_rem) {
++              len = dev->partial_len + dev->partial_rem;
++              skb2 = alloc_skb(len, GFP_ATOMIC);
++              if (!skb2)
++                      return 0;
++              skb_put(skb2, len);
++              memcpy(skb2->data, (void *)dev->partial_data,
++                     dev->partial_len);
++              memcpy(skb2->data + dev->partial_len, skb->data,
++                     dev->partial_rem);
++              usbnet_skb_return(dev, skb2);
++              skb_pull(skb, (dev->partial_rem + 1) & ~1);
++              dev->partial_rem = 0;
++              if (skb->len < 2)
++                      return 1;
++      }
++
++      /* a skb can contain multiple packets */
++      while (skb->len > 1) {
++              /* first two bytes are packet length */
++              len = skb->data[0] | (skb->data[1] << 8);
++              skb_pull(skb, 2);
++
++              /* if last packet in the skb, let usbnet to process it */
++              if (len == skb->len || len + 1 == skb->len) {
++                      skb_trim(skb, len);
++                      break;
++              }
++
++              if (len > CX82310_MTU) {
++                      dev_err(&dev->udev->dev, "RX packet too long: %d B\n",
++                              len);
++                      return 0;
++              }
++
++              /* incomplete packet, save it for the next skb */
++              if (len > skb->len) {
++                      dev->partial_len = skb->len;
++                      dev->partial_rem = len - skb->len;
++                      memcpy((void *)dev->partial_data, skb->data,
++                             dev->partial_len);
++                      skb_pull(skb, skb->len);
++                      break;
++              }
++
++              skb2 = alloc_skb(len, GFP_ATOMIC);
++              if (!skb2)
++                      return 0;
++              skb_put(skb2, len);
++              memcpy(skb2->data, skb->data, len);
++              /* process the packet */
++              usbnet_skb_return(dev, skb2);
++
++              skb_pull(skb, (len + 1) & ~1);
++      }
++
++      /* let usbnet process the last packet */
++      return 1;
++}
++
++/* TX is easy, just add 2 bytes of length at the beginning */
++static struct sk_buff *cx82310_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
++                                     gfp_t flags)
++{
++      int len = skb->len;
++
++      if (skb_headroom(skb) < 2) {
++              struct sk_buff *skb2 = skb_copy_expand(skb, 2, 0, flags);
++              dev_kfree_skb_any(skb);
++              skb = skb2;
++              if (!skb)
++                      return NULL;
++      }
++      skb_push(skb, 2);
++
++      skb->data[0] = len;
++      skb->data[1] = len >> 8;
++
++      return skb;
++}
++
++
++static const struct driver_info       cx82310_info = {
++      .description    = "Conexant CX82310 USB ethernet",
++      .flags          = FLAG_ETHER,
++      .bind           = cx82310_bind,
++      .unbind         = cx82310_unbind,
++      .rx_fixup       = cx82310_rx_fixup,
++      .tx_fixup       = cx82310_tx_fixup,
++};
++
++static const struct usb_device_id products[] = {
++      {
++              USB_DEVICE_AND_INTERFACE_INFO(0x0572, 0xcb01, 0xff, 0, 0),
++              .driver_info = (unsigned long) &cx82310_info
++      },
++      { },
++};
++MODULE_DEVICE_TABLE(usb, products);
++
++static struct usb_driver cx82310_driver = {
++      .name           = "cx82310_eth",
++      .id_table       = products,
++      .probe          = usbnet_probe,
++      .disconnect     = usbnet_disconnect,
++      .suspend        = usbnet_suspend,
++      .resume         = usbnet_resume,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(cx82310_driver);
++
++MODULE_AUTHOR("Ondrej Zary");
++MODULE_DESCRIPTION("Conexant CX82310-based ADSL router USB ethernet driver");
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/dm9601.c backports-3.18.1-1/drivers/net/usb/dm9601.c
+--- backports-3.18.1-1.org/drivers/net/usb/dm9601.c    1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/dm9601.c        2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,647 @@
++/*
++ * Davicom DM96xx USB 10/100Mbps ethernet devices
++ *
++ * Peter Korsgaard <jacmet@sunsite.dk>
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2.  This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++//#define DEBUG
++
++#include <linux/module.h>
++#include <linux/sched.h>
++#include <linux/stddef.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/crc32.h>
++#include <linux/usb/usbnet.h>
++#include <linux/slab.h>
++
++/* datasheet:
++ http://ptm2.cc.utu.fi/ftp/network/cards/DM9601/From_NET/DM9601-DS-P01-930914.pdf
++*/
++
++/* control requests */
++#define DM_READ_REGS  0x00
++#define DM_WRITE_REGS 0x01
++#define DM_READ_MEMS  0x02
++#define DM_WRITE_REG  0x03
++#define DM_WRITE_MEMS 0x05
++#define DM_WRITE_MEM  0x07
++
++/* registers */
++#define DM_NET_CTRL   0x00
++#define DM_RX_CTRL    0x05
++#define DM_SHARED_CTRL        0x0b
++#define DM_SHARED_ADDR        0x0c
++#define DM_SHARED_DATA        0x0d    /* low + high */
++#define DM_PHY_ADDR   0x10    /* 6 bytes */
++#define DM_MCAST_ADDR 0x16    /* 8 bytes */
++#define DM_GPR_CTRL   0x1e
++#define DM_GPR_DATA   0x1f
++#define DM_CHIP_ID    0x2c
++#define DM_MODE_CTRL  0x91    /* only on dm9620 */
++
++/* chip id values */
++#define ID_DM9601     0
++#define ID_DM9620     1
++
++#define DM_MAX_MCAST  64
++#define DM_MCAST_SIZE 8
++#define DM_EEPROM_LEN 256
++#define DM_TX_OVERHEAD        2       /* 2 byte header */
++#define DM_RX_OVERHEAD        7       /* 3 byte header + 4 byte crc tail */
++#define DM_TIMEOUT    1000
++
++static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data)
++{
++      int err;
++      err = usbnet_read_cmd(dev, DM_READ_REGS,
++                             USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
++                             0, reg, data, length);
++      if(err != length && err >= 0)
++              err = -EINVAL;
++      return err;
++}
++
++static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value)
++{
++      return dm_read(dev, reg, 1, value);
++}
++
++static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data)
++{
++      int err;
++      err = usbnet_write_cmd(dev, DM_WRITE_REGS,
++                              USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
++                              0, reg, data, length);
++
++      if (err >= 0 && err < length)
++              err = -EINVAL;
++      return err;
++}
++
++static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value)
++{
++      return usbnet_write_cmd(dev, DM_WRITE_REG,
++                              USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
++                              value, reg, NULL, 0);
++}
++
++static void dm_write_async(struct usbnet *dev, u8 reg, u16 length, void *data)
++{
++      usbnet_write_cmd_async(dev, DM_WRITE_REGS,
++                             USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
++                             0, reg, data, length);
++}
++
++static void dm_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
++{
++      usbnet_write_cmd_async(dev, DM_WRITE_REG,
++                             USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
++                             value, reg, NULL, 0);
++}
++
++static int dm_read_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 *value)
++{
++      int ret, i;
++
++      mutex_lock(&dev->phy_mutex);
++
++      dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
++      dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0xc : 0x4);
++
++      for (i = 0; i < DM_TIMEOUT; i++) {
++              u8 tmp = 0;
++
++              udelay(1);
++              ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp);
++              if (ret < 0)
++                      goto out;
++
++              /* ready */
++              if ((tmp & 1) == 0)
++                      break;
++      }
++
++      if (i == DM_TIMEOUT) {
++              netdev_err(dev->net, "%s read timed out!\n", phy ? "phy" : "eeprom");
++              ret = -EIO;
++              goto out;
++      }
++
++      dm_write_reg(dev, DM_SHARED_CTRL, 0x0);
++      ret = dm_read(dev, DM_SHARED_DATA, 2, value);
++
++      netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n",
++                 phy, reg, *value, ret);
++
++ out:
++      mutex_unlock(&dev->phy_mutex);
++      return ret;
++}
++
++static int dm_write_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 value)
++{
++      int ret, i;
++
++      mutex_lock(&dev->phy_mutex);
++
++      ret = dm_write(dev, DM_SHARED_DATA, 2, &value);
++      if (ret < 0)
++              goto out;
++
++      dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
++      dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1a : 0x12);
++
++      for (i = 0; i < DM_TIMEOUT; i++) {
++              u8 tmp = 0;
++
++              udelay(1);
++              ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp);
++              if (ret < 0)
++                      goto out;
++
++              /* ready */
++              if ((tmp & 1) == 0)
++                      break;
++      }
++
++      if (i == DM_TIMEOUT) {
++              netdev_err(dev->net, "%s write timed out!\n", phy ? "phy" : "eeprom");
++              ret = -EIO;
++              goto out;
++      }
++
++      dm_write_reg(dev, DM_SHARED_CTRL, 0x0);
++
++out:
++      mutex_unlock(&dev->phy_mutex);
++      return ret;
++}
++
++static int dm_read_eeprom_word(struct usbnet *dev, u8 offset, void *value)
++{
++      return dm_read_shared_word(dev, 0, offset, value);
++}
++
++
++
++static int dm9601_get_eeprom_len(struct net_device *dev)
++{
++      return DM_EEPROM_LEN;
++}
++
++static int dm9601_get_eeprom(struct net_device *net,
++                           struct ethtool_eeprom *eeprom, u8 * data)
++{
++      struct usbnet *dev = netdev_priv(net);
++      __le16 *ebuf = (__le16 *) data;
++      int i;
++
++      /* access is 16bit */
++      if ((eeprom->offset % 2) || (eeprom->len % 2))
++              return -EINVAL;
++
++      for (i = 0; i < eeprom->len / 2; i++) {
++              if (dm_read_eeprom_word(dev, eeprom->offset / 2 + i,
++                                      &ebuf[i]) < 0)
++                      return -EINVAL;
++      }
++      return 0;
++}
++
++static int dm9601_mdio_read(struct net_device *netdev, int phy_id, int loc)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++
++      __le16 res;
++
++      if (phy_id) {
++              netdev_dbg(dev->net, "Only internal phy supported\n");
++              return 0;
++      }
++
++      dm_read_shared_word(dev, 1, loc, &res);
++
++      netdev_dbg(dev->net,
++                 "dm9601_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
++                 phy_id, loc, le16_to_cpu(res));
++
++      return le16_to_cpu(res);
++}
++
++static void dm9601_mdio_write(struct net_device *netdev, int phy_id, int loc,
++                            int val)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      __le16 res = cpu_to_le16(val);
++
++      if (phy_id) {
++              netdev_dbg(dev->net, "Only internal phy supported\n");
++              return;
++      }
++
++      netdev_dbg(dev->net, "dm9601_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
++                 phy_id, loc, val);
++
++      dm_write_shared_word(dev, 1, loc, res);
++}
++
++static void dm9601_get_drvinfo(struct net_device *net,
++                             struct ethtool_drvinfo *info)
++{
++      /* Inherit standard device info */
++      usbnet_get_drvinfo(net, info);
++      info->eedump_len = DM_EEPROM_LEN;
++}
++
++static u32 dm9601_get_link(struct net_device *net)
++{
++      struct usbnet *dev = netdev_priv(net);
++
++      return mii_link_ok(&dev->mii);
++}
++
++static int dm9601_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
++{
++      struct usbnet *dev = netdev_priv(net);
++
++      return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
++}
++
++static const struct ethtool_ops dm9601_ethtool_ops = {
++      .get_drvinfo    = dm9601_get_drvinfo,
++      .get_link       = dm9601_get_link,
++      .get_msglevel   = usbnet_get_msglevel,
++      .set_msglevel   = usbnet_set_msglevel,
++      .get_eeprom_len = dm9601_get_eeprom_len,
++      .get_eeprom     = dm9601_get_eeprom,
++      .get_settings   = usbnet_get_settings,
++      .set_settings   = usbnet_set_settings,
++      .nway_reset     = usbnet_nway_reset,
++};
++
++static void dm9601_set_multicast(struct net_device *net)
++{
++      struct usbnet *dev = netdev_priv(net);
++      /* We use the 20 byte dev->data for our 8 byte filter buffer
++       * to avoid allocating memory that is tricky to free later */
++      u8 *hashes = (u8 *) & dev->data;
++      u8 rx_ctl = 0x31;
++
++      memset(hashes, 0x00, DM_MCAST_SIZE);
++      hashes[DM_MCAST_SIZE - 1] |= 0x80;      /* broadcast address */
++
++      if (net->flags & IFF_PROMISC) {
++              rx_ctl |= 0x02;
++      } else if (net->flags & IFF_ALLMULTI ||
++                 netdev_mc_count(net) > DM_MAX_MCAST) {
++              rx_ctl |= 0x08;
++      } else if (!netdev_mc_empty(net)) {
++              struct netdev_hw_addr *ha;
++
++              netdev_for_each_mc_addr(ha, net) {
++                      u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26;
++                      hashes[crc >> 3] |= 1 << (crc & 0x7);
++              }
++      }
++
++      dm_write_async(dev, DM_MCAST_ADDR, DM_MCAST_SIZE, hashes);
++      dm_write_reg_async(dev, DM_RX_CTRL, rx_ctl);
++}
++
++static void __dm9601_set_mac_address(struct usbnet *dev)
++{
++      dm_write_async(dev, DM_PHY_ADDR, ETH_ALEN, dev->net->dev_addr);
++}
++
++static int dm9601_set_mac_address(struct net_device *net, void *p)
++{
++      struct sockaddr *addr = p;
++      struct usbnet *dev = netdev_priv(net);
++
++      if (!is_valid_ether_addr(addr->sa_data)) {
++              dev_err(&net->dev, "not setting invalid mac address %pM\n",
++                                                              addr->sa_data);
++              return -EINVAL;
++      }
++
++      memcpy(net->dev_addr, addr->sa_data, net->addr_len);
++      __dm9601_set_mac_address(dev);
++
++      return 0;
++}
++
++static const struct net_device_ops dm9601_netdev_ops = {
++      .ndo_open               = usbnet_open,
++      .ndo_stop               = usbnet_stop,
++      .ndo_start_xmit         = usbnet_start_xmit,
++      .ndo_tx_timeout         = usbnet_tx_timeout,
++      .ndo_change_mtu         = usbnet_change_mtu,
++      .ndo_validate_addr      = eth_validate_addr,
++      .ndo_do_ioctl           = dm9601_ioctl,
++      .ndo_set_rx_mode        = dm9601_set_multicast,
++      .ndo_set_mac_address    = dm9601_set_mac_address,
++};
++
++static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      int ret;
++      u8 mac[ETH_ALEN], id;
++
++      ret = usbnet_get_endpoints(dev, intf);
++      if (ret)
++              goto out;
++
++      dev->net->netdev_ops = &dm9601_netdev_ops;
++      dev->net->ethtool_ops = &dm9601_ethtool_ops;
++      dev->net->hard_header_len += DM_TX_OVERHEAD;
++      dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
++
++      /* dm9620/21a require room for 4 byte padding, even in dm9601
++       * mode, so we need +1 to be able to receive full size
++       * ethernet frames.
++       */
++      dev->rx_urb_size = dev->net->mtu + ETH_HLEN + DM_RX_OVERHEAD + 1;
++
++      dev->mii.dev = dev->net;
++      dev->mii.mdio_read = dm9601_mdio_read;
++      dev->mii.mdio_write = dm9601_mdio_write;
++      dev->mii.phy_id_mask = 0x1f;
++      dev->mii.reg_num_mask = 0x1f;
++
++      /* reset */
++      dm_write_reg(dev, DM_NET_CTRL, 1);
++      udelay(20);
++
++      /* read MAC */
++      if (dm_read(dev, DM_PHY_ADDR, ETH_ALEN, mac) < 0) {
++              printk(KERN_ERR "Error reading MAC address\n");
++              ret = -ENODEV;
++              goto out;
++      }
++
++      /*
++       * Overwrite the auto-generated address only with good ones.
++       */
++      if (is_valid_ether_addr(mac))
++              memcpy(dev->net->dev_addr, mac, ETH_ALEN);
++      else {
++              printk(KERN_WARNING
++                      "dm9601: No valid MAC address in EEPROM, using %pM\n",
++                      dev->net->dev_addr);
++              __dm9601_set_mac_address(dev);
++      }
++
++      if (dm_read_reg(dev, DM_CHIP_ID, &id) < 0) {
++              netdev_err(dev->net, "Error reading chip ID\n");
++              ret = -ENODEV;
++              goto out;
++      }
++
++      /* put dm9620 devices in dm9601 mode */
++      if (id == ID_DM9620) {
++              u8 mode;
++
++              if (dm_read_reg(dev, DM_MODE_CTRL, &mode) < 0) {
++                      netdev_err(dev->net, "Error reading MODE_CTRL\n");
++                      ret = -ENODEV;
++                      goto out;
++              }
++              dm_write_reg(dev, DM_MODE_CTRL, mode & 0x7f);
++      }
++
++      /* power up phy */
++      dm_write_reg(dev, DM_GPR_CTRL, 1);
++      dm_write_reg(dev, DM_GPR_DATA, 0);
++
++      /* receive broadcast packets */
++      dm9601_set_multicast(dev->net);
++
++      dm9601_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
++      dm9601_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
++                        ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
++      mii_nway_restart(&dev->mii);
++
++out:
++      return ret;
++}
++
++static int dm9601_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
++{
++      u8 status;
++      int len;
++
++      /* format:
++         b1: rx status
++         b2: packet length (incl crc) low
++         b3: packet length (incl crc) high
++         b4..n-4: packet data
++         bn-3..bn: ethernet crc
++       */
++
++      if (unlikely(skb->len < DM_RX_OVERHEAD)) {
++              dev_err(&dev->udev->dev, "unexpected tiny rx frame\n");
++              return 0;
++      }
++
++      status = skb->data[0];
++      len = (skb->data[1] | (skb->data[2] << 8)) - 4;
++
++      if (unlikely(status & 0xbf)) {
++              if (status & 0x01) dev->net->stats.rx_fifo_errors++;
++              if (status & 0x02) dev->net->stats.rx_crc_errors++;
++              if (status & 0x04) dev->net->stats.rx_frame_errors++;
++              if (status & 0x20) dev->net->stats.rx_missed_errors++;
++              if (status & 0x90) dev->net->stats.rx_length_errors++;
++              return 0;
++      }
++
++      skb_pull(skb, 3);
++      skb_trim(skb, len);
++
++      return 1;
++}
++
++static struct sk_buff *dm9601_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
++                                     gfp_t flags)
++{
++      int len, pad;
++
++      /* format:
++         b1: packet length low
++         b2: packet length high
++         b3..n: packet data
++      */
++
++      len = skb->len + DM_TX_OVERHEAD;
++
++      /* workaround for dm962x errata with tx fifo getting out of
++       * sync if a USB bulk transfer retry happens right after a
++       * packet with odd / maxpacket length by adding up to 3 bytes
++       * padding.
++       */
++      while ((len & 1) || !(len % dev->maxpacket))
++              len++;
++
++      len -= DM_TX_OVERHEAD; /* hw header doesn't count as part of length */
++      pad = len - skb->len;
++
++      if (skb_headroom(skb) < DM_TX_OVERHEAD || skb_tailroom(skb) < pad) {
++              struct sk_buff *skb2;
++
++              skb2 = skb_copy_expand(skb, DM_TX_OVERHEAD, pad, flags);
++              dev_kfree_skb_any(skb);
++              skb = skb2;
++              if (!skb)
++                      return NULL;
++      }
++
++      __skb_push(skb, DM_TX_OVERHEAD);
++
++      if (pad) {
++              memset(skb->data + skb->len, 0, pad);
++              __skb_put(skb, pad);
++      }
++
++      skb->data[0] = len;
++      skb->data[1] = len >> 8;
++
++      return skb;
++}
++
++static void dm9601_status(struct usbnet *dev, struct urb *urb)
++{
++      int link;
++      u8 *buf;
++
++      /* format:
++         b0: net status
++         b1: tx status 1
++         b2: tx status 2
++         b3: rx status
++         b4: rx overflow
++         b5: rx count
++         b6: tx count
++         b7: gpr
++      */
++
++      if (urb->actual_length < 8)
++              return;
++
++      buf = urb->transfer_buffer;
++
++      link = !!(buf[0] & 0x40);
++      if (netif_carrier_ok(dev->net) != link) {
++              usbnet_link_change(dev, link, 1);
++              netdev_dbg(dev->net, "Link Status is: %d\n", link);
++      }
++}
++
++static int dm9601_link_reset(struct usbnet *dev)
++{
++      struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
++
++      mii_check_media(&dev->mii, 1, 1);
++      mii_ethtool_gset(&dev->mii, &ecmd);
++
++      netdev_dbg(dev->net, "link_reset() speed: %u duplex: %d\n",
++                 ethtool_cmd_speed(&ecmd), ecmd.duplex);
++
++      return 0;
++}
++
++static const struct driver_info dm9601_info = {
++      .description    = "Davicom DM96xx USB 10/100 Ethernet",
++      .flags          = FLAG_ETHER | FLAG_LINK_INTR,
++      .bind           = dm9601_bind,
++      .rx_fixup       = dm9601_rx_fixup,
++      .tx_fixup       = dm9601_tx_fixup,
++      .status         = dm9601_status,
++      .link_reset     = dm9601_link_reset,
++      .reset          = dm9601_link_reset,
++};
++
++static const struct usb_device_id products[] = {
++      {
++       USB_DEVICE(0x07aa, 0x9601),    /* Corega FEther USB-TXC */
++       .driver_info = (unsigned long)&dm9601_info,
++       },
++      {
++       USB_DEVICE(0x0a46, 0x9601),    /* Davicom USB-100 */
++       .driver_info = (unsigned long)&dm9601_info,
++       },
++      {
++       USB_DEVICE(0x0a46, 0x6688),    /* ZT6688 USB NIC */
++       .driver_info = (unsigned long)&dm9601_info,
++       },
++      {
++       USB_DEVICE(0x0a46, 0x0268),    /* ShanTou ST268 USB NIC */
++       .driver_info = (unsigned long)&dm9601_info,
++       },
++      {
++       USB_DEVICE(0x0a46, 0x8515),    /* ADMtek ADM8515 USB NIC */
++       .driver_info = (unsigned long)&dm9601_info,
++       },
++      {
++      USB_DEVICE(0x0a47, 0x9601),     /* Hirose USB-100 */
++      .driver_info = (unsigned long)&dm9601_info,
++       },
++      {
++      USB_DEVICE(0x0fe6, 0x8101),     /* DM9601 USB to Fast Ethernet Adapter */
++      .driver_info = (unsigned long)&dm9601_info,
++       },
++      {
++       USB_DEVICE(0x0fe6, 0x9700),    /* DM9601 USB to Fast Ethernet Adapter */
++       .driver_info = (unsigned long)&dm9601_info,
++       },
++      {
++       USB_DEVICE(0x0a46, 0x9000),    /* DM9000E */
++       .driver_info = (unsigned long)&dm9601_info,
++       },
++      {
++       USB_DEVICE(0x0a46, 0x9620),    /* DM9620 USB to Fast Ethernet Adapter */
++       .driver_info = (unsigned long)&dm9601_info,
++       },
++      {
++       USB_DEVICE(0x0a46, 0x9621),    /* DM9621A USB to Fast Ethernet Adapter */
++       .driver_info = (unsigned long)&dm9601_info,
++      },
++      {
++       USB_DEVICE(0x0a46, 0x9622),    /* DM9622 USB to Fast Ethernet Adapter */
++       .driver_info = (unsigned long)&dm9601_info,
++      },
++      {
++       USB_DEVICE(0x0a46, 0x0269),    /* DM962OA USB to Fast Ethernet Adapter */
++       .driver_info = (unsigned long)&dm9601_info,
++      },
++      {
++       USB_DEVICE(0x0a46, 0x1269),    /* DM9621A USB to Fast Ethernet Adapter */
++       .driver_info = (unsigned long)&dm9601_info,
++      },
++      {},                     // END
++};
++
++MODULE_DEVICE_TABLE(usb, products);
++
++static struct usb_driver dm9601_driver = {
++      .name = "dm9601",
++      .id_table = products,
++      .probe = usbnet_probe,
++      .disconnect = usbnet_disconnect,
++      .suspend = usbnet_suspend,
++      .resume = usbnet_resume,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(dm9601_driver);
++
++MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
++MODULE_DESCRIPTION("Davicom DM96xx USB 10/100 ethernet devices");
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/gl620a.c backports-3.18.1-1/drivers/net/usb/gl620a.c
+--- backports-3.18.1-1.org/drivers/net/usb/gl620a.c    1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/gl620a.c        2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,242 @@
++/*
++ * GeneSys GL620USB-A based links
++ * Copyright (C) 2001 by Jiun-Jie Huang <huangjj@genesyslogic.com.tw>
++ * Copyright (C) 2001 by Stanislav Brabec <utx@penguin.cz>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ */
++
++// #define    DEBUG                   // error path messages, extra info
++// #define    VERBOSE                 // more; success messages
++
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/workqueue.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/usb/usbnet.h>
++#include <linux/gfp.h>
++
++
++/*
++ * GeneSys GL620USB-A (www.genesyslogic.com.tw)
++ *
++ * ... should partially interop with the Win32 driver for this hardware.
++ * The GeneSys docs imply there's some NDIS issue motivating this framing.
++ *
++ * Some info from GeneSys:
++ *  - GL620USB-A is full duplex; GL620USB is only half duplex for bulk.
++ *    (Some cables, like the BAFO-100c, use the half duplex version.)
++ *  - For the full duplex model, the low bit of the version code says
++ *    which side is which ("left/right").
++ *  - For the half duplex type, a control/interrupt handshake settles
++ *    the transfer direction.  (That's disabled here, partially coded.)
++ *    A control URB would block until other side writes an interrupt.
++ *
++ * Original code from Jiun-Jie Huang <huangjj@genesyslogic.com.tw>
++ * and merged into "usbnet" by Stanislav Brabec <utx@penguin.cz>.
++ */
++
++// control msg write command
++#define GENELINK_CONNECT_WRITE                        0xF0
++// interrupt pipe index
++#define GENELINK_INTERRUPT_PIPE                       0x03
++// interrupt read buffer size
++#define INTERRUPT_BUFSIZE                     0x08
++// interrupt pipe interval value
++#define GENELINK_INTERRUPT_INTERVAL           0x10
++// max transmit packet number per transmit
++#define GL_MAX_TRANSMIT_PACKETS                       32
++// max packet length
++#define GL_MAX_PACKET_LEN                     1514
++// max receive buffer size
++#define GL_RCV_BUF_SIZE               \
++      (((GL_MAX_PACKET_LEN + 4) * GL_MAX_TRANSMIT_PACKETS) + 4)
++
++struct gl_packet {
++      __le32          packet_length;
++      char            packet_data [1];
++};
++
++struct gl_header {
++      __le32                  packet_count;
++      struct gl_packet        packets;
++};
++
++static int genelink_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
++{
++      struct gl_header        *header;
++      struct gl_packet        *packet;
++      struct sk_buff          *gl_skb;
++      u32                     size;
++      u32                     count;
++
++      /* This check is no longer done by usbnet */
++      if (skb->len < dev->net->hard_header_len)
++              return 0;
++
++      header = (struct gl_header *) skb->data;
++
++      // get the packet count of the received skb
++      count = le32_to_cpu(header->packet_count);
++      if (count > GL_MAX_TRANSMIT_PACKETS) {
++              netdev_dbg(dev->net,
++                         "genelink: invalid received packet count %u\n",
++                         count);
++              return 0;
++      }
++
++      // set the current packet pointer to the first packet
++      packet = &header->packets;
++
++      // decrement the length for the packet count size 4 bytes
++      skb_pull(skb, 4);
++
++      while (count > 1) {
++              // get the packet length
++              size = le32_to_cpu(packet->packet_length);
++
++              // this may be a broken packet
++              if (size > GL_MAX_PACKET_LEN) {
++                      netdev_dbg(dev->net, "genelink: invalid rx length %d\n",
++                                 size);
++                      return 0;
++              }
++
++              // allocate the skb for the individual packet
++              gl_skb = alloc_skb(size, GFP_ATOMIC);
++              if (gl_skb) {
++
++                      // copy the packet data to the new skb
++                      memcpy(skb_put(gl_skb, size),
++                                      packet->packet_data, size);
++                      usbnet_skb_return(dev, gl_skb);
++              }
++
++              // advance to the next packet
++              packet = (struct gl_packet *)&packet->packet_data[size];
++              count--;
++
++              // shift the data pointer to the next gl_packet
++              skb_pull(skb, size + 4);
++      }
++
++      // skip the packet length field 4 bytes
++      skb_pull(skb, 4);
++
++      if (skb->len > GL_MAX_PACKET_LEN) {
++              netdev_dbg(dev->net, "genelink: invalid rx length %d\n",
++                         skb->len);
++              return 0;
++      }
++      return 1;
++}
++
++static struct sk_buff *
++genelink_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
++{
++      int     padlen;
++      int     length = skb->len;
++      int     headroom = skb_headroom(skb);
++      int     tailroom = skb_tailroom(skb);
++      __le32  *packet_count;
++      __le32  *packet_len;
++
++      // FIXME:  magic numbers, bleech
++      padlen = ((skb->len + (4 + 4*1)) % 64) ? 0 : 1;
++
++      if ((!skb_cloned(skb))
++                      && ((headroom + tailroom) >= (padlen + (4 + 4*1)))) {
++              if ((headroom < (4 + 4*1)) || (tailroom < padlen)) {
++                      skb->data = memmove(skb->head + (4 + 4*1),
++                                           skb->data, skb->len);
++                      skb_set_tail_pointer(skb, skb->len);
++              }
++      } else {
++              struct sk_buff  *skb2;
++              skb2 = skb_copy_expand(skb, (4 + 4*1) , padlen, flags);
++              dev_kfree_skb_any(skb);
++              skb = skb2;
++              if (!skb)
++                      return NULL;
++      }
++
++      // attach the packet count to the header
++      packet_count = (__le32 *) skb_push(skb, (4 + 4*1));
++      packet_len = packet_count + 1;
++
++      *packet_count = cpu_to_le32(1);
++      *packet_len = cpu_to_le32(length);
++
++      // add padding byte
++      if ((skb->len % dev->maxpacket) == 0)
++              skb_put(skb, 1);
++
++      return skb;
++}
++
++static int genelink_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      dev->hard_mtu = GL_RCV_BUF_SIZE;
++      dev->net->hard_header_len += 4;
++      dev->in = usb_rcvbulkpipe(dev->udev, dev->driver_info->in);
++      dev->out = usb_sndbulkpipe(dev->udev, dev->driver_info->out);
++      return 0;
++}
++
++static const struct driver_info       genelink_info = {
++      .description =  "Genesys GeneLink",
++      .flags =        FLAG_POINTTOPOINT | FLAG_FRAMING_GL | FLAG_NO_SETINT,
++      .bind =         genelink_bind,
++      .rx_fixup =     genelink_rx_fixup,
++      .tx_fixup =     genelink_tx_fixup,
++
++      .in = 1, .out = 2,
++
++#ifdef        GENELINK_ACK
++      .check_connect =genelink_check_connect,
++#endif
++};
++
++static const struct usb_device_id     products [] = {
++
++{
++      USB_DEVICE(0x05e3, 0x0502),     // GL620USB-A
++      .driver_info =  (unsigned long) &genelink_info,
++},
++      /* NOT: USB_DEVICE(0x05e3, 0x0501),     // GL620USB
++       * that's half duplex, not currently supported
++       */
++      { },            // END
++};
++MODULE_DEVICE_TABLE(usb, products);
++
++static struct usb_driver gl620a_driver = {
++      .name =         "gl620a",
++      .id_table =     products,
++      .probe =        usbnet_probe,
++      .disconnect =   usbnet_disconnect,
++      .suspend =      usbnet_suspend,
++      .resume =       usbnet_resume,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(gl620a_driver);
++
++MODULE_AUTHOR("Jiun-Jie Huang");
++MODULE_DESCRIPTION("GL620-USB-A Host-to-Host Link cables");
++MODULE_LICENSE("GPL");
++
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/hso.c backports-3.18.1-1/drivers/net/usb/hso.c
+--- backports-3.18.1-1.org/drivers/net/usb/hso.c       1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/hso.c   2015-01-03 13:42:25.000000000 +0100
+@@ -0,0 +1,3326 @@
++/******************************************************************************
++ *
++ * Driver for Option High Speed Mobile Devices.
++ *
++ *  Copyright (C) 2008 Option International
++ *                     Filip Aben <f.aben@option.com>
++ *                     Denis Joseph Barrow <d.barow@option.com>
++ *                     Jan Dumon <j.dumon@option.com>
++ *  Copyright (C) 2007 Andrew Bird (Sphere Systems Ltd)
++ *                    <ajb@spheresystems.co.uk>
++ *  Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
++ *  Copyright (C) 2008 Novell, Inc.
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ *
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
++ *  USA
++ *
++ *
++ *****************************************************************************/
++
++/******************************************************************************
++ *
++ * Description of the device:
++ *
++ * Interface 0:       Contains the IP network interface on the bulk end points.
++ *            The multiplexed serial ports are using the interrupt and
++ *            control endpoints.
++ *            Interrupt contains a bitmap telling which multiplexed
++ *            serialport needs servicing.
++ *
++ * Interface 1:       Diagnostics port, uses bulk only, do not submit urbs until the
++ *            port is opened, as this have a huge impact on the network port
++ *            throughput.
++ *
++ * Interface 2:       Standard modem interface - circuit switched interface, this
++ *            can be used to make a standard ppp connection however it
++ *              should not be used in conjunction with the IP network interface
++ *              enabled for USB performance reasons i.e. if using this set
++ *              ideally disable_net=1.
++ *
++ *****************************************************************************/
++
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/netdevice.h>
++#include <linux/module.h>
++#include <linux/ethtool.h>
++#include <linux/usb.h>
++#include <linux/timer.h>
++#include <linux/tty.h>
++#include <linux/tty_driver.h>
++#include <linux/tty_flip.h>
++#include <linux/kmod.h>
++#include <linux/rfkill.h>
++#include <linux/ip.h>
++#include <linux/uaccess.h>
++#include <linux/usb/cdc.h>
++#include <net/arp.h>
++#include <asm/byteorder.h>
++#include <linux/serial_core.h>
++#include <linux/serial.h>
++#include <asm/local.h>
++
++#define MOD_AUTHOR                    "Option Wireless"
++#define MOD_DESCRIPTION                       "USB High Speed Option driver"
++#define MOD_LICENSE                   "GPL"
++
++#define HSO_MAX_NET_DEVICES           10
++#define HSO__MAX_MTU                  2048
++#define DEFAULT_MTU                   1500
++#define DEFAULT_MRU                   1500
++
++#define CTRL_URB_RX_SIZE              1024
++#define CTRL_URB_TX_SIZE              64
++
++#define BULK_URB_RX_SIZE              4096
++#define BULK_URB_TX_SIZE              8192
++
++#define MUX_BULK_RX_BUF_SIZE          HSO__MAX_MTU
++#define MUX_BULK_TX_BUF_SIZE          HSO__MAX_MTU
++#define MUX_BULK_RX_BUF_COUNT         4
++#define USB_TYPE_OPTION_VENDOR                0x20
++
++/* These definitions are used with the struct hso_net flags element */
++/* - use *_bit operations on it. (bit indices not values.) */
++#define HSO_NET_RUNNING                       0
++
++#define       HSO_NET_TX_TIMEOUT              (HZ*10)
++
++#define HSO_SERIAL_MAGIC              0x48534f31
++
++/* Number of ttys to handle */
++#define HSO_SERIAL_TTY_MINORS         256
++
++#define MAX_RX_URBS                   2
++
++/*****************************************************************************/
++/* Debugging functions                                                       */
++/*****************************************************************************/
++#define D__(lvl_, fmt, arg...)                                \
++      do {                                            \
++              printk(lvl_ "[%d:%s]: " fmt "\n",       \
++                     __LINE__, __func__, ## arg);     \
++      } while (0)
++
++#define D_(lvl, args...)                              \
++      do {                                            \
++              if (lvl & debug)                        \
++                      D__(KERN_INFO, args);           \
++      } while (0)
++
++#define D1(args...)   D_(0x01, ##args)
++#define D2(args...)   D_(0x02, ##args)
++#define D3(args...)   D_(0x04, ##args)
++#define D4(args...)   D_(0x08, ##args)
++#define D5(args...)   D_(0x10, ##args)
++
++/*****************************************************************************/
++/* Enumerators                                                               */
++/*****************************************************************************/
++enum pkt_parse_state {
++      WAIT_IP,
++      WAIT_DATA,
++      WAIT_SYNC
++};
++
++/*****************************************************************************/
++/* Structs                                                                   */
++/*****************************************************************************/
++
++struct hso_shared_int {
++      struct usb_endpoint_descriptor *intr_endp;
++      void *shared_intr_buf;
++      struct urb *shared_intr_urb;
++      struct usb_device *usb;
++      int use_count;
++      int ref_count;
++      struct mutex shared_int_lock;
++};
++
++struct hso_net {
++      struct hso_device *parent;
++      struct net_device *net;
++      struct rfkill *rfkill;
++
++      struct usb_endpoint_descriptor *in_endp;
++      struct usb_endpoint_descriptor *out_endp;
++
++      struct urb *mux_bulk_rx_urb_pool[MUX_BULK_RX_BUF_COUNT];
++      struct urb *mux_bulk_tx_urb;
++      void *mux_bulk_rx_buf_pool[MUX_BULK_RX_BUF_COUNT];
++      void *mux_bulk_tx_buf;
++
++      struct sk_buff *skb_rx_buf;
++      struct sk_buff *skb_tx_buf;
++
++      enum pkt_parse_state rx_parse_state;
++      spinlock_t net_lock;
++
++      unsigned short rx_buf_size;
++      unsigned short rx_buf_missing;
++      struct iphdr rx_ip_hdr;
++
++      unsigned long flags;
++};
++
++enum rx_ctrl_state{
++      RX_IDLE,
++      RX_SENT,
++      RX_PENDING
++};
++
++#define BM_REQUEST_TYPE (0xa1)
++#define B_NOTIFICATION  (0x20)
++#define W_VALUE         (0x0)
++#define W_LENGTH        (0x2)
++
++#define B_OVERRUN       (0x1<<6)
++#define B_PARITY        (0x1<<5)
++#define B_FRAMING       (0x1<<4)
++#define B_RING_SIGNAL   (0x1<<3)
++#define B_BREAK         (0x1<<2)
++#define B_TX_CARRIER    (0x1<<1)
++#define B_RX_CARRIER    (0x1<<0)
++
++struct hso_serial_state_notification {
++      u8 bmRequestType;
++      u8 bNotification;
++      u16 wValue;
++      u16 wIndex;
++      u16 wLength;
++      u16 UART_state_bitmap;
++} __packed;
++
++struct hso_tiocmget {
++      struct mutex mutex;
++      wait_queue_head_t waitq;
++      int    intr_completed;
++      struct usb_endpoint_descriptor *endp;
++      struct urb *urb;
++      struct hso_serial_state_notification serial_state_notification;
++      u16    prev_UART_state_bitmap;
++      struct uart_icount icount;
++};
++
++
++struct hso_serial {
++      struct hso_device *parent;
++      int magic;
++      u8 minor;
++
++      struct hso_shared_int *shared_int;
++
++      /* rx/tx urb could be either a bulk urb or a control urb depending
++         on which serial port it is used on. */
++      struct urb *rx_urb[MAX_RX_URBS];
++      u8 num_rx_urbs;
++      u8 *rx_data[MAX_RX_URBS];
++      u16 rx_data_length;     /* should contain allocated length */
++
++      struct urb *tx_urb;
++      u8 *tx_data;
++      u8 *tx_buffer;
++      u16 tx_data_length;     /* should contain allocated length */
++      u16 tx_data_count;
++      u16 tx_buffer_count;
++      struct usb_ctrlrequest ctrl_req_tx;
++      struct usb_ctrlrequest ctrl_req_rx;
++
++      struct usb_endpoint_descriptor *in_endp;
++      struct usb_endpoint_descriptor *out_endp;
++
++      enum rx_ctrl_state rx_state;
++      u8 rts_state;
++      u8 dtr_state;
++      unsigned tx_urb_used:1;
++
++      struct tty_port port;
++      /* from usb_serial_port */
++      spinlock_t serial_lock;
++
++      int (*write_data) (struct hso_serial *serial);
++      struct hso_tiocmget  *tiocmget;
++      /* Hacks required to get flow control
++       * working on the serial receive buffers
++       * so as not to drop characters on the floor.
++       */
++      int  curr_rx_urb_idx;
++      u8   rx_urb_filled[MAX_RX_URBS];
++      struct tasklet_struct unthrottle_tasklet;
++};
++
++struct hso_device {
++      union {
++              struct hso_serial *dev_serial;
++              struct hso_net *dev_net;
++      } port_data;
++
++      u32 port_spec;
++
++      u8 is_active;
++      u8 usb_gone;
++      struct work_struct async_get_intf;
++      struct work_struct async_put_intf;
++      struct work_struct reset_device;
++
++      struct usb_device *usb;
++      struct usb_interface *interface;
++
++      struct device *dev;
++      struct kref ref;
++      struct mutex mutex;
++};
++
++/* Type of interface */
++#define HSO_INTF_MASK         0xFF00
++#define       HSO_INTF_MUX            0x0100
++#define       HSO_INTF_BULK           0x0200
++
++/* Type of port */
++#define HSO_PORT_MASK         0xFF
++#define HSO_PORT_NO_PORT      0x0
++#define       HSO_PORT_CONTROL        0x1
++#define       HSO_PORT_APP            0x2
++#define       HSO_PORT_GPS            0x3
++#define       HSO_PORT_PCSC           0x4
++#define       HSO_PORT_APP2           0x5
++#define HSO_PORT_GPS_CONTROL  0x6
++#define HSO_PORT_MSD          0x7
++#define HSO_PORT_VOICE                0x8
++#define HSO_PORT_DIAG2                0x9
++#define       HSO_PORT_DIAG           0x10
++#define       HSO_PORT_MODEM          0x11
++#define       HSO_PORT_NETWORK        0x12
++
++/* Additional device info */
++#define HSO_INFO_MASK         0xFF000000
++#define HSO_INFO_CRC_BUG      0x01000000
++
++/*****************************************************************************/
++/* Prototypes                                                                */
++/*****************************************************************************/
++/* Serial driver functions */
++static int hso_serial_tiocmset(struct tty_struct *tty,
++                             unsigned int set, unsigned int clear);
++static void ctrl_callback(struct urb *urb);
++static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial);
++static void hso_kick_transmit(struct hso_serial *serial);
++/* Helper functions */
++static int hso_mux_submit_intr_urb(struct hso_shared_int *mux_int,
++                                 struct usb_device *usb, gfp_t gfp);
++static void handle_usb_error(int status, const char *function,
++                           struct hso_device *hso_dev);
++static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
++                                                int type, int dir);
++static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports);
++static void hso_free_interface(struct usb_interface *intf);
++static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags);
++static int hso_stop_serial_device(struct hso_device *hso_dev);
++static int hso_start_net_device(struct hso_device *hso_dev);
++static void hso_free_shared_int(struct hso_shared_int *shared_int);
++static int hso_stop_net_device(struct hso_device *hso_dev);
++static void hso_serial_ref_free(struct kref *ref);
++static void hso_std_serial_read_bulk_callback(struct urb *urb);
++static int hso_mux_serial_read(struct hso_serial *serial);
++static void async_get_intf(struct work_struct *data);
++static void async_put_intf(struct work_struct *data);
++static int hso_put_activity(struct hso_device *hso_dev);
++static int hso_get_activity(struct hso_device *hso_dev);
++static void tiocmget_intr_callback(struct urb *urb);
++static void reset_device(struct work_struct *data);
++/*****************************************************************************/
++/* Helping functions                                                         */
++/*****************************************************************************/
++
++/* #define DEBUG */
++
++static inline struct hso_net *dev2net(struct hso_device *hso_dev)
++{
++      return hso_dev->port_data.dev_net;
++}
++
++static inline struct hso_serial *dev2ser(struct hso_device *hso_dev)
++{
++      return hso_dev->port_data.dev_serial;
++}
++
++/* Debugging functions */
++#ifdef DEBUG
++static void dbg_dump(int line_count, const char *func_name, unsigned char *buf,
++                   unsigned int len)
++{
++      static char name[255];
++
++      sprintf(name, "hso[%d:%s]", line_count, func_name);
++      print_hex_dump_bytes(name, DUMP_PREFIX_NONE, buf, len);
++}
++
++#define DUMP(buf_, len_)      \
++      dbg_dump(__LINE__, __func__, (unsigned char *)buf_, len_)
++
++#define DUMP1(buf_, len_)                     \
++      do {                                    \
++              if (0x01 & debug)               \
++                      DUMP(buf_, len_);       \
++      } while (0)
++#else
++#define DUMP(buf_, len_)
++#define DUMP1(buf_, len_)
++#endif
++
++/* module parameters */
++static int debug;
++static int tty_major;
++static int disable_net;
++
++/* driver info */
++static const char driver_name[] = "hso";
++static const char tty_filename[] = "ttyHS";
++static const char *version = __FILE__ ": " MOD_AUTHOR;
++/* the usb driver itself (registered in hso_init) */
++static struct usb_driver hso_driver;
++/* serial structures */
++static struct tty_driver *tty_drv;
++static struct hso_device *serial_table[HSO_SERIAL_TTY_MINORS];
++static struct hso_device *network_table[HSO_MAX_NET_DEVICES];
++static spinlock_t serial_table_lock;
++
++static const s32 default_port_spec[] = {
++      HSO_INTF_MUX | HSO_PORT_NETWORK,
++      HSO_INTF_BULK | HSO_PORT_DIAG,
++      HSO_INTF_BULK | HSO_PORT_MODEM,
++      0
++};
++
++static const s32 icon321_port_spec[] = {
++      HSO_INTF_MUX | HSO_PORT_NETWORK,
++      HSO_INTF_BULK | HSO_PORT_DIAG2,
++      HSO_INTF_BULK | HSO_PORT_MODEM,
++      HSO_INTF_BULK | HSO_PORT_DIAG,
++      0
++};
++
++#define default_port_device(vendor, product)  \
++      USB_DEVICE(vendor, product),    \
++              .driver_info = (kernel_ulong_t)default_port_spec
++
++#define icon321_port_device(vendor, product)  \
++      USB_DEVICE(vendor, product),    \
++              .driver_info = (kernel_ulong_t)icon321_port_spec
++
++/* list of devices we support */
++static const struct usb_device_id hso_ids[] = {
++      {default_port_device(0x0af0, 0x6711)},
++      {default_port_device(0x0af0, 0x6731)},
++      {default_port_device(0x0af0, 0x6751)},
++      {default_port_device(0x0af0, 0x6771)},
++      {default_port_device(0x0af0, 0x6791)},
++      {default_port_device(0x0af0, 0x6811)},
++      {default_port_device(0x0af0, 0x6911)},
++      {default_port_device(0x0af0, 0x6951)},
++      {default_port_device(0x0af0, 0x6971)},
++      {default_port_device(0x0af0, 0x7011)},
++      {default_port_device(0x0af0, 0x7031)},
++      {default_port_device(0x0af0, 0x7051)},
++      {default_port_device(0x0af0, 0x7071)},
++      {default_port_device(0x0af0, 0x7111)},
++      {default_port_device(0x0af0, 0x7211)},
++      {default_port_device(0x0af0, 0x7251)},
++      {default_port_device(0x0af0, 0x7271)},
++      {default_port_device(0x0af0, 0x7311)},
++      {default_port_device(0x0af0, 0xc031)},  /* Icon-Edge */
++      {icon321_port_device(0x0af0, 0xd013)},  /* Module HSxPA */
++      {icon321_port_device(0x0af0, 0xd031)},  /* Icon-321 */
++      {icon321_port_device(0x0af0, 0xd033)},  /* Icon-322 */
++      {USB_DEVICE(0x0af0, 0x7301)},           /* GE40x */
++      {USB_DEVICE(0x0af0, 0x7361)},           /* GE40x */
++      {USB_DEVICE(0x0af0, 0x7381)},           /* GE40x */
++      {USB_DEVICE(0x0af0, 0x7401)},           /* GI 0401 */
++      {USB_DEVICE(0x0af0, 0x7501)},           /* GTM 382 */
++      {USB_DEVICE(0x0af0, 0x7601)},           /* GE40x */
++      {USB_DEVICE(0x0af0, 0x7701)},
++      {USB_DEVICE(0x0af0, 0x7706)},
++      {USB_DEVICE(0x0af0, 0x7801)},
++      {USB_DEVICE(0x0af0, 0x7901)},
++      {USB_DEVICE(0x0af0, 0x7A01)},
++      {USB_DEVICE(0x0af0, 0x7A05)},
++      {USB_DEVICE(0x0af0, 0x8200)},
++      {USB_DEVICE(0x0af0, 0x8201)},
++      {USB_DEVICE(0x0af0, 0x8300)},
++      {USB_DEVICE(0x0af0, 0x8302)},
++      {USB_DEVICE(0x0af0, 0x8304)},
++      {USB_DEVICE(0x0af0, 0x8400)},
++      {USB_DEVICE(0x0af0, 0x8600)},
++      {USB_DEVICE(0x0af0, 0x8800)},
++      {USB_DEVICE(0x0af0, 0x8900)},
++      {USB_DEVICE(0x0af0, 0x9000)},
++      {USB_DEVICE(0x0af0, 0x9200)},           /* Option GTM671WFS */
++      {USB_DEVICE(0x0af0, 0xd035)},
++      {USB_DEVICE(0x0af0, 0xd055)},
++      {USB_DEVICE(0x0af0, 0xd155)},
++      {USB_DEVICE(0x0af0, 0xd255)},
++      {USB_DEVICE(0x0af0, 0xd057)},
++      {USB_DEVICE(0x0af0, 0xd157)},
++      {USB_DEVICE(0x0af0, 0xd257)},
++      {USB_DEVICE(0x0af0, 0xd357)},
++      {USB_DEVICE(0x0af0, 0xd058)},
++      {USB_DEVICE(0x0af0, 0xc100)},
++      {}
++};
++MODULE_DEVICE_TABLE(usb, hso_ids);
++
++/* Sysfs attribute */
++static ssize_t hso_sysfs_show_porttype(struct device *dev,
++                                     struct device_attribute *attr,
++                                     char *buf)
++{
++      struct hso_device *hso_dev = dev_get_drvdata(dev);
++      char *port_name;
++
++      if (!hso_dev)
++              return 0;
++
++      switch (hso_dev->port_spec & HSO_PORT_MASK) {
++      case HSO_PORT_CONTROL:
++              port_name = "Control";
++              break;
++      case HSO_PORT_APP:
++              port_name = "Application";
++              break;
++      case HSO_PORT_APP2:
++              port_name = "Application2";
++              break;
++      case HSO_PORT_GPS:
++              port_name = "GPS";
++              break;
++      case HSO_PORT_GPS_CONTROL:
++              port_name = "GPS Control";
++              break;
++      case HSO_PORT_PCSC:
++              port_name = "PCSC";
++              break;
++      case HSO_PORT_DIAG:
++              port_name = "Diagnostic";
++              break;
++      case HSO_PORT_DIAG2:
++              port_name = "Diagnostic2";
++              break;
++      case HSO_PORT_MODEM:
++              port_name = "Modem";
++              break;
++      case HSO_PORT_NETWORK:
++              port_name = "Network";
++              break;
++      default:
++              port_name = "Unknown";
++              break;
++      }
++
++      return sprintf(buf, "%s\n", port_name);
++}
++static DEVICE_ATTR(hsotype, S_IRUGO, hso_sysfs_show_porttype, NULL);
++
++static int hso_urb_to_index(struct hso_serial *serial, struct urb *urb)
++{
++      int idx;
++
++      for (idx = 0; idx < serial->num_rx_urbs; idx++)
++              if (serial->rx_urb[idx] == urb)
++                      return idx;
++      dev_err(serial->parent->dev, "hso_urb_to_index failed\n");
++      return -1;
++}
++
++/* converts mux value to a port spec value */
++static u32 hso_mux_to_port(int mux)
++{
++      u32 result;
++
++      switch (mux) {
++      case 0x1:
++              result = HSO_PORT_CONTROL;
++              break;
++      case 0x2:
++              result = HSO_PORT_APP;
++              break;
++      case 0x4:
++              result = HSO_PORT_PCSC;
++              break;
++      case 0x8:
++              result = HSO_PORT_GPS;
++              break;
++      case 0x10:
++              result = HSO_PORT_APP2;
++              break;
++      default:
++              result = HSO_PORT_NO_PORT;
++      }
++      return result;
++}
++
++/* converts port spec value to a mux value */
++static u32 hso_port_to_mux(int port)
++{
++      u32 result;
++
++      switch (port & HSO_PORT_MASK) {
++      case HSO_PORT_CONTROL:
++              result = 0x0;
++              break;
++      case HSO_PORT_APP:
++              result = 0x1;
++              break;
++      case HSO_PORT_PCSC:
++              result = 0x2;
++              break;
++      case HSO_PORT_GPS:
++              result = 0x3;
++              break;
++      case HSO_PORT_APP2:
++              result = 0x4;
++              break;
++      default:
++              result = 0x0;
++      }
++      return result;
++}
++
++static struct hso_serial *get_serial_by_shared_int_and_type(
++                                      struct hso_shared_int *shared_int,
++                                      int mux)
++{
++      int i, port;
++
++      port = hso_mux_to_port(mux);
++
++      for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
++              if (serial_table[i] &&
++                  (dev2ser(serial_table[i])->shared_int == shared_int) &&
++                  ((serial_table[i]->port_spec & HSO_PORT_MASK) == port)) {
++                      return dev2ser(serial_table[i]);
++              }
++      }
++
++      return NULL;
++}
++
++static struct hso_serial *get_serial_by_index(unsigned index)
++{
++      struct hso_serial *serial = NULL;
++      unsigned long flags;
++
++      spin_lock_irqsave(&serial_table_lock, flags);
++      if (serial_table[index])
++              serial = dev2ser(serial_table[index]);
++      spin_unlock_irqrestore(&serial_table_lock, flags);
++
++      return serial;
++}
++
++static int get_free_serial_index(void)
++{
++      int index;
++      unsigned long flags;
++
++      spin_lock_irqsave(&serial_table_lock, flags);
++      for (index = 0; index < HSO_SERIAL_TTY_MINORS; index++) {
++              if (serial_table[index] == NULL) {
++                      spin_unlock_irqrestore(&serial_table_lock, flags);
++                      return index;
++              }
++      }
++      spin_unlock_irqrestore(&serial_table_lock, flags);
++
++      printk(KERN_ERR "%s: no free serial devices in table\n", __func__);
++      return -1;
++}
++
++static void set_serial_by_index(unsigned index, struct hso_serial *serial)
++{
++      unsigned long flags;
++
++      spin_lock_irqsave(&serial_table_lock, flags);
++      if (serial)
++              serial_table[index] = serial->parent;
++      else
++              serial_table[index] = NULL;
++      spin_unlock_irqrestore(&serial_table_lock, flags);
++}
++
++static void handle_usb_error(int status, const char *function,
++                           struct hso_device *hso_dev)
++{
++      char *explanation;
++
++      switch (status) {
++      case -ENODEV:
++              explanation = "no device";
++              break;
++      case -ENOENT:
++              explanation = "endpoint not enabled";
++              break;
++      case -EPIPE:
++              explanation = "endpoint stalled";
++              break;
++      case -ENOSPC:
++              explanation = "not enough bandwidth";
++              break;
++      case -ESHUTDOWN:
++              explanation = "device disabled";
++              break;
++      case -EHOSTUNREACH:
++              explanation = "device suspended";
++              break;
++      case -EINVAL:
++      case -EAGAIN:
++      case -EFBIG:
++      case -EMSGSIZE:
++              explanation = "internal error";
++              break;
++      case -EILSEQ:
++      case -EPROTO:
++      case -ETIME:
++      case -ETIMEDOUT:
++              explanation = "protocol error";
++              if (hso_dev)
++                      schedule_work(&hso_dev->reset_device);
++              break;
++      default:
++              explanation = "unknown status";
++              break;
++      }
++
++      /* log a meaningful explanation of an USB status */
++      D1("%s: received USB status - %s (%d)", function, explanation, status);
++}
++
++/* Network interface functions */
++
++/* called when net interface is brought up by ifconfig */
++static int hso_net_open(struct net_device *net)
++{
++      struct hso_net *odev = netdev_priv(net);
++      unsigned long flags = 0;
++
++      if (!odev) {
++              dev_err(&net->dev, "No net device !\n");
++              return -ENODEV;
++      }
++
++      odev->skb_tx_buf = NULL;
++
++      /* setup environment */
++      spin_lock_irqsave(&odev->net_lock, flags);
++      odev->rx_parse_state = WAIT_IP;
++      odev->rx_buf_size = 0;
++      odev->rx_buf_missing = sizeof(struct iphdr);
++      spin_unlock_irqrestore(&odev->net_lock, flags);
++
++      /* We are up and running. */
++      set_bit(HSO_NET_RUNNING, &odev->flags);
++      hso_start_net_device(odev->parent);
++
++      /* Tell the kernel we are ready to start receiving from it */
++      netif_start_queue(net);
++
++      return 0;
++}
++
++/* called when interface is brought down by ifconfig */
++static int hso_net_close(struct net_device *net)
++{
++      struct hso_net *odev = netdev_priv(net);
++
++      /* we don't need the queue anymore */
++      netif_stop_queue(net);
++      /* no longer running */
++      clear_bit(HSO_NET_RUNNING, &odev->flags);
++
++      hso_stop_net_device(odev->parent);
++
++      /* done */
++      return 0;
++}
++
++/* USB tells is xmit done, we should start the netqueue again */
++static void write_bulk_callback(struct urb *urb)
++{
++      struct hso_net *odev = urb->context;
++      int status = urb->status;
++
++      /* Sanity check */
++      if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
++              dev_err(&urb->dev->dev, "%s: device not running\n", __func__);
++              return;
++      }
++
++      /* Do we still have a valid kernel network device? */
++      if (!netif_device_present(odev->net)) {
++              dev_err(&urb->dev->dev, "%s: net device not present\n",
++                      __func__);
++              return;
++      }
++
++      /* log status, but don't act on it, we don't need to resubmit anything
++       * anyhow */
++      if (status)
++              handle_usb_error(status, __func__, odev->parent);
++
++      hso_put_activity(odev->parent);
++
++      /* Tell the network interface we are ready for another frame */
++      netif_wake_queue(odev->net);
++}
++
++/* called by kernel when we need to transmit a packet */
++static netdev_tx_t hso_net_start_xmit(struct sk_buff *skb,
++                                          struct net_device *net)
++{
++      struct hso_net *odev = netdev_priv(net);
++      int result;
++
++      /* Tell the kernel, "No more frames 'til we are done with this one." */
++      netif_stop_queue(net);
++      if (hso_get_activity(odev->parent) == -EAGAIN) {
++              odev->skb_tx_buf = skb;
++              return NETDEV_TX_OK;
++      }
++
++      /* log if asked */
++      DUMP1(skb->data, skb->len);
++      /* Copy it from kernel memory to OUR memory */
++      memcpy(odev->mux_bulk_tx_buf, skb->data, skb->len);
++      D1("len: %d/%d", skb->len, MUX_BULK_TX_BUF_SIZE);
++
++      /* Fill in the URB for shipping it out. */
++      usb_fill_bulk_urb(odev->mux_bulk_tx_urb,
++                        odev->parent->usb,
++                        usb_sndbulkpipe(odev->parent->usb,
++                                        odev->out_endp->
++                                        bEndpointAddress & 0x7F),
++                        odev->mux_bulk_tx_buf, skb->len, write_bulk_callback,
++                        odev);
++
++      /* Deal with the Zero Length packet problem, I hope */
++      odev->mux_bulk_tx_urb->transfer_flags |= URB_ZERO_PACKET;
++
++      /* Send the URB on its merry way. */
++      result = usb_submit_urb(odev->mux_bulk_tx_urb, GFP_ATOMIC);
++      if (result) {
++              dev_warn(&odev->parent->interface->dev,
++                      "failed mux_bulk_tx_urb %d\n", result);
++              net->stats.tx_errors++;
++              netif_start_queue(net);
++      } else {
++              net->stats.tx_packets++;
++              net->stats.tx_bytes += skb->len;
++      }
++      dev_kfree_skb(skb);
++      /* we're done */
++      return NETDEV_TX_OK;
++}
++
++static const struct ethtool_ops ops = {
++      .get_link = ethtool_op_get_link
++};
++
++/* called when a packet did not ack after watchdogtimeout */
++static void hso_net_tx_timeout(struct net_device *net)
++{
++      struct hso_net *odev = netdev_priv(net);
++
++      if (!odev)
++              return;
++
++      /* Tell syslog we are hosed. */
++      dev_warn(&net->dev, "Tx timed out.\n");
++
++      /* Tear the waiting frame off the list */
++      if (odev->mux_bulk_tx_urb &&
++          (odev->mux_bulk_tx_urb->status == -EINPROGRESS))
++              usb_unlink_urb(odev->mux_bulk_tx_urb);
++
++      /* Update statistics */
++      net->stats.tx_errors++;
++}
++
++/* make a real packet from the received USB buffer */
++static void packetizeRx(struct hso_net *odev, unsigned char *ip_pkt,
++                      unsigned int count, unsigned char is_eop)
++{
++      unsigned short temp_bytes;
++      unsigned short buffer_offset = 0;
++      unsigned short frame_len;
++      unsigned char *tmp_rx_buf;
++
++      /* log if needed */
++      D1("Rx %d bytes", count);
++      DUMP(ip_pkt, min(128, (int)count));
++
++      while (count) {
++              switch (odev->rx_parse_state) {
++              case WAIT_IP:
++                      /* waiting for IP header. */
++                      /* wanted bytes - size of ip header */
++                      temp_bytes =
++                          (count <
++                           odev->rx_buf_missing) ? count : odev->
++                          rx_buf_missing;
++
++                      memcpy(((unsigned char *)(&odev->rx_ip_hdr)) +
++                             odev->rx_buf_size, ip_pkt + buffer_offset,
++                             temp_bytes);
++
++                      odev->rx_buf_size += temp_bytes;
++                      buffer_offset += temp_bytes;
++                      odev->rx_buf_missing -= temp_bytes;
++                      count -= temp_bytes;
++
++                      if (!odev->rx_buf_missing) {
++                              /* header is complete allocate an sk_buffer and
++                               * continue to WAIT_DATA */
++                              frame_len = ntohs(odev->rx_ip_hdr.tot_len);
++
++                              if ((frame_len > DEFAULT_MRU) ||
++                                  (frame_len < sizeof(struct iphdr))) {
++                                      dev_err(&odev->net->dev,
++                                              "Invalid frame (%d) length\n",
++                                              frame_len);
++                                      odev->rx_parse_state = WAIT_SYNC;
++                                      continue;
++                              }
++                              /* Allocate an sk_buff */
++                              odev->skb_rx_buf = netdev_alloc_skb(odev->net,
++                                                                  frame_len);
++                              if (!odev->skb_rx_buf) {
++                                      /* We got no receive buffer. */
++                                      D1("could not allocate memory");
++                                      odev->rx_parse_state = WAIT_SYNC;
++                                      return;
++                              }
++
++                              /* Copy what we got so far. make room for iphdr
++                               * after tail. */
++                              tmp_rx_buf =
++                                  skb_put(odev->skb_rx_buf,
++                                          sizeof(struct iphdr));
++                              memcpy(tmp_rx_buf, (char *)&(odev->rx_ip_hdr),
++                                     sizeof(struct iphdr));
++
++                              /* ETH_HLEN */
++                              odev->rx_buf_size = sizeof(struct iphdr);
++
++                              /* Filip actually use .tot_len */
++                              odev->rx_buf_missing =
++                                  frame_len - sizeof(struct iphdr);
++                              odev->rx_parse_state = WAIT_DATA;
++                      }
++                      break;
++
++              case WAIT_DATA:
++                      temp_bytes = (count < odev->rx_buf_missing)
++                                      ? count : odev->rx_buf_missing;
++
++                      /* Copy the rest of the bytes that are left in the
++                       * buffer into the waiting sk_buf. */
++                      /* Make room for temp_bytes after tail. */
++                      tmp_rx_buf = skb_put(odev->skb_rx_buf, temp_bytes);
++                      memcpy(tmp_rx_buf, ip_pkt + buffer_offset, temp_bytes);
++
++                      odev->rx_buf_missing -= temp_bytes;
++                      count -= temp_bytes;
++                      buffer_offset += temp_bytes;
++                      odev->rx_buf_size += temp_bytes;
++                      if (!odev->rx_buf_missing) {
++                              /* Packet is complete. Inject into stack. */
++                              /* We have IP packet here */
++                              odev->skb_rx_buf->protocol = cpu_to_be16(ETH_P_IP);
++                              skb_reset_mac_header(odev->skb_rx_buf);
++
++                              /* Ship it off to the kernel */
++                              netif_rx(odev->skb_rx_buf);
++                              /* No longer our buffer. */
++                              odev->skb_rx_buf = NULL;
++
++                              /* update out statistics */
++                              odev->net->stats.rx_packets++;
++
++                              odev->net->stats.rx_bytes += odev->rx_buf_size;
++
++                              odev->rx_buf_size = 0;
++                              odev->rx_buf_missing = sizeof(struct iphdr);
++                              odev->rx_parse_state = WAIT_IP;
++                      }
++                      break;
++
++              case WAIT_SYNC:
++                      D1(" W_S");
++                      count = 0;
++                      break;
++              default:
++                      D1(" ");
++                      count--;
++                      break;
++              }
++      }
++
++      /* Recovery mechanism for WAIT_SYNC state. */
++      if (is_eop) {
++              if (odev->rx_parse_state == WAIT_SYNC) {
++                      odev->rx_parse_state = WAIT_IP;
++                      odev->rx_buf_size = 0;
++                      odev->rx_buf_missing = sizeof(struct iphdr);
++              }
++      }
++}
++
++static void fix_crc_bug(struct urb *urb, __le16 max_packet_size)
++{
++      static const u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
++      u32 rest = urb->actual_length % le16_to_cpu(max_packet_size);
++
++      if (((rest == 5) || (rest == 6)) &&
++          !memcmp(((u8 *)urb->transfer_buffer) + urb->actual_length - 4,
++                  crc_check, 4)) {
++              urb->actual_length -= 4;
++      }
++}
++
++/* Moving data from usb to kernel (in interrupt state) */
++static void read_bulk_callback(struct urb *urb)
++{
++      struct hso_net *odev = urb->context;
++      struct net_device *net;
++      int result;
++      int status = urb->status;
++
++      /* is al ok?  (Filip: Who's Al ?) */
++      if (status) {
++              handle_usb_error(status, __func__, odev->parent);
++              return;
++      }
++
++      /* Sanity check */
++      if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
++              D1("BULK IN callback but driver is not active!");
++              return;
++      }
++      usb_mark_last_busy(urb->dev);
++
++      net = odev->net;
++
++      if (!netif_device_present(net)) {
++              /* Somebody killed our network interface... */
++              return;
++      }
++
++      if (odev->parent->port_spec & HSO_INFO_CRC_BUG)
++              fix_crc_bug(urb, odev->in_endp->wMaxPacketSize);
++
++      /* do we even have a packet? */
++      if (urb->actual_length) {
++              /* Handle the IP stream, add header and push it onto network
++               * stack if the packet is complete. */
++              spin_lock(&odev->net_lock);
++              packetizeRx(odev, urb->transfer_buffer, urb->actual_length,
++                          (urb->transfer_buffer_length >
++                           urb->actual_length) ? 1 : 0);
++              spin_unlock(&odev->net_lock);
++      }
++
++      /* We are done with this URB, resubmit it. Prep the USB to wait for
++       * another frame. Reuse same as received. */
++      usb_fill_bulk_urb(urb,
++                        odev->parent->usb,
++                        usb_rcvbulkpipe(odev->parent->usb,
++                                        odev->in_endp->
++                                        bEndpointAddress & 0x7F),
++                        urb->transfer_buffer, MUX_BULK_RX_BUF_SIZE,
++                        read_bulk_callback, odev);
++
++      /* Give this to the USB subsystem so it can tell us when more data
++       * arrives. */
++      result = usb_submit_urb(urb, GFP_ATOMIC);
++      if (result)
++              dev_warn(&odev->parent->interface->dev,
++                       "%s failed submit mux_bulk_rx_urb %d\n", __func__,
++                       result);
++}
++
++/* Serial driver functions */
++
++static void hso_init_termios(struct ktermios *termios)
++{
++      /*
++       * The default requirements for this device are:
++       */
++      termios->c_iflag &=
++              ~(IGNBRK        /* disable ignore break */
++              | BRKINT        /* disable break causes interrupt */
++              | PARMRK        /* disable mark parity errors */
++              | ISTRIP        /* disable clear high bit of input characters */
++              | INLCR         /* disable translate NL to CR */
++              | IGNCR         /* disable ignore CR */
++              | ICRNL         /* disable translate CR to NL */
++              | IXON);        /* disable enable XON/XOFF flow control */
++
++      /* disable postprocess output characters */
++      termios->c_oflag &= ~OPOST;
++
++      termios->c_lflag &=
++              ~(ECHO          /* disable echo input characters */
++              | ECHONL        /* disable echo new line */
++              | ICANON        /* disable erase, kill, werase, and rprnt
++                                 special characters */
++              | ISIG          /* disable interrupt, quit, and suspend special
++                                 characters */
++              | IEXTEN);      /* disable non-POSIX special characters */
++
++      termios->c_cflag &=
++              ~(CSIZE         /* no size */
++              | PARENB        /* disable parity bit */
++              | CBAUD         /* clear current baud rate */
++              | CBAUDEX);     /* clear current buad rate */
++
++      termios->c_cflag |= CS8;        /* character size 8 bits */
++
++      /* baud rate 115200 */
++      tty_termios_encode_baud_rate(termios, 115200, 115200);
++}
++
++static void _hso_serial_set_termios(struct tty_struct *tty,
++                                  struct ktermios *old)
++{
++      struct hso_serial *serial = tty->driver_data;
++
++      if (!serial) {
++              printk(KERN_ERR "%s: no tty structures", __func__);
++              return;
++      }
++
++      D4("port %d", serial->minor);
++
++      /*
++       *      Fix up unsupported bits
++       */
++      tty->termios.c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */
++
++      tty->termios.c_cflag &=
++              ~(CSIZE         /* no size */
++              | PARENB        /* disable parity bit */
++              | CBAUD         /* clear current baud rate */
++              | CBAUDEX);     /* clear current buad rate */
++
++      tty->termios.c_cflag |= CS8;    /* character size 8 bits */
++
++      /* baud rate 115200 */
++      tty_encode_baud_rate(tty, 115200, 115200);
++}
++
++static void hso_resubmit_rx_bulk_urb(struct hso_serial *serial, struct urb *urb)
++{
++      int result;
++      /* We are done with this URB, resubmit it. Prep the USB to wait for
++       * another frame */
++      usb_fill_bulk_urb(urb, serial->parent->usb,
++                        usb_rcvbulkpipe(serial->parent->usb,
++                                        serial->in_endp->
++                                        bEndpointAddress & 0x7F),
++                        urb->transfer_buffer, serial->rx_data_length,
++                        hso_std_serial_read_bulk_callback, serial);
++      /* Give this to the USB subsystem so it can tell us when more data
++       * arrives. */
++      result = usb_submit_urb(urb, GFP_ATOMIC);
++      if (result) {
++              dev_err(&urb->dev->dev, "%s failed submit serial rx_urb %d\n",
++                      __func__, result);
++      }
++}
++
++
++
++
++static void put_rxbuf_data_and_resubmit_bulk_urb(struct hso_serial *serial)
++{
++      int count;
++      struct urb *curr_urb;
++
++      while (serial->rx_urb_filled[serial->curr_rx_urb_idx]) {
++              curr_urb = serial->rx_urb[serial->curr_rx_urb_idx];
++              count = put_rxbuf_data(curr_urb, serial);
++              if (count == -1)
++                      return;
++              if (count == 0) {
++                      serial->curr_rx_urb_idx++;
++                      if (serial->curr_rx_urb_idx >= serial->num_rx_urbs)
++                              serial->curr_rx_urb_idx = 0;
++                      hso_resubmit_rx_bulk_urb(serial, curr_urb);
++              }
++      }
++}
++
++static void put_rxbuf_data_and_resubmit_ctrl_urb(struct hso_serial *serial)
++{
++      int count = 0;
++      struct urb *urb;
++
++      urb = serial->rx_urb[0];
++      if (atomic_read(&serial->port.count) > 0) {
++              count = put_rxbuf_data(urb, serial);
++              if (count == -1)
++                      return;
++      }
++      /* Re issue a read as long as we receive data. */
++
++      if (count == 0 && ((urb->actual_length != 0) ||
++                         (serial->rx_state == RX_PENDING))) {
++              serial->rx_state = RX_SENT;
++              hso_mux_serial_read(serial);
++      } else
++              serial->rx_state = RX_IDLE;
++}
++
++
++/* read callback for Diag and CS port */
++static void hso_std_serial_read_bulk_callback(struct urb *urb)
++{
++      struct hso_serial *serial = urb->context;
++      int status = urb->status;
++
++      D4("\n--- Got serial_read_bulk callback %02x ---", status);
++
++      /* sanity check */
++      if (!serial) {
++              D1("serial == NULL");
++              return;
++      }
++      if (status) {
++              handle_usb_error(status, __func__, serial->parent);
++              return;
++      }
++
++      D1("Actual length = %d\n", urb->actual_length);
++      DUMP1(urb->transfer_buffer, urb->actual_length);
++
++      /* Anyone listening? */
++      if (atomic_read(&serial->port.count) == 0)
++              return;
++
++      if (serial->parent->port_spec & HSO_INFO_CRC_BUG)
++              fix_crc_bug(urb, serial->in_endp->wMaxPacketSize);
++      /* Valid data, handle RX data */
++      spin_lock(&serial->serial_lock);
++      serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1;
++      put_rxbuf_data_and_resubmit_bulk_urb(serial);
++      spin_unlock(&serial->serial_lock);
++}
++
++/*
++ * This needs to be a tasklet otherwise we will
++ * end up recursively calling this function.
++ */
++static void hso_unthrottle_tasklet(struct hso_serial *serial)
++{
++      unsigned long flags;
++
++      spin_lock_irqsave(&serial->serial_lock, flags);
++      if ((serial->parent->port_spec & HSO_INTF_MUX))
++              put_rxbuf_data_and_resubmit_ctrl_urb(serial);
++      else
++              put_rxbuf_data_and_resubmit_bulk_urb(serial);
++      spin_unlock_irqrestore(&serial->serial_lock, flags);
++}
++
++static        void hso_unthrottle(struct tty_struct *tty)
++{
++      struct hso_serial *serial = tty->driver_data;
++
++      tasklet_hi_schedule(&serial->unthrottle_tasklet);
++}
++
++/* open the requested serial port */
++static int hso_serial_open(struct tty_struct *tty, struct file *filp)
++{
++      struct hso_serial *serial = get_serial_by_index(tty->index);
++      int result;
++
++      /* sanity check */
++      if (serial == NULL || serial->magic != HSO_SERIAL_MAGIC) {
++              WARN_ON(1);
++              tty->driver_data = NULL;
++              D1("Failed to open port");
++              return -ENODEV;
++      }
++
++      mutex_lock(&serial->parent->mutex);
++      result = usb_autopm_get_interface(serial->parent->interface);
++      if (result < 0)
++              goto err_out;
++
++      D1("Opening %d", serial->minor);
++      kref_get(&serial->parent->ref);
++
++      /* setup */
++      tty->driver_data = serial;
++      tty_port_tty_set(&serial->port, tty);
++
++      /* check for port already opened, if not set the termios */
++      if (atomic_inc_return(&serial->port.count) == 1) {
++              serial->rx_state = RX_IDLE;
++              /* Force default termio settings */
++              _hso_serial_set_termios(tty, NULL);
++              tasklet_init(&serial->unthrottle_tasklet,
++                           (void (*)(unsigned long))hso_unthrottle_tasklet,
++                           (unsigned long)serial);
++              result = hso_start_serial_device(serial->parent, GFP_KERNEL);
++              if (result) {
++                      hso_stop_serial_device(serial->parent);
++                      atomic_dec(&serial->port.count);
++                      kref_put(&serial->parent->ref, hso_serial_ref_free);
++              }
++      } else {
++              D1("Port was already open");
++      }
++
++      usb_autopm_put_interface(serial->parent->interface);
++
++      /* done */
++      if (result)
++              hso_serial_tiocmset(tty, TIOCM_RTS | TIOCM_DTR, 0);
++err_out:
++      mutex_unlock(&serial->parent->mutex);
++      return result;
++}
++
++/* close the requested serial port */
++static void hso_serial_close(struct tty_struct *tty, struct file *filp)
++{
++      struct hso_serial *serial = tty->driver_data;
++      u8 usb_gone;
++
++      D1("Closing serial port");
++
++      /* Open failed, no close cleanup required */
++      if (serial == NULL)
++              return;
++
++      mutex_lock(&serial->parent->mutex);
++      usb_gone = serial->parent->usb_gone;
++
++      if (!usb_gone)
++              usb_autopm_get_interface(serial->parent->interface);
++
++      /* reset the rts and dtr */
++      /* do the actual close */
++      atomic_dec(&serial->port.count);
++
++      if (atomic_read(&serial->port.count) <= 0) {
++              atomic_set(&serial->port.count, 0);
++              tty_port_tty_set(&serial->port, NULL);
++              if (!usb_gone)
++                      hso_stop_serial_device(serial->parent);
++              tasklet_kill(&serial->unthrottle_tasklet);
++      }
++
++      if (!usb_gone)
++              usb_autopm_put_interface(serial->parent->interface);
++
++      mutex_unlock(&serial->parent->mutex);
++
++      kref_put(&serial->parent->ref, hso_serial_ref_free);
++}
++
++/* close the requested serial port */
++static int hso_serial_write(struct tty_struct *tty, const unsigned char *buf,
++                          int count)
++{
++      struct hso_serial *serial = tty->driver_data;
++      int space, tx_bytes;
++      unsigned long flags;
++
++      /* sanity check */
++      if (serial == NULL) {
++              printk(KERN_ERR "%s: serial is NULL\n", __func__);
++              return -ENODEV;
++      }
++
++      spin_lock_irqsave(&serial->serial_lock, flags);
++
++      space = serial->tx_data_length - serial->tx_buffer_count;
++      tx_bytes = (count < space) ? count : space;
++
++      if (!tx_bytes)
++              goto out;
++
++      memcpy(serial->tx_buffer + serial->tx_buffer_count, buf, tx_bytes);
++      serial->tx_buffer_count += tx_bytes;
++
++out:
++      spin_unlock_irqrestore(&serial->serial_lock, flags);
++
++      hso_kick_transmit(serial);
++      /* done */
++      return tx_bytes;
++}
++
++/* how much room is there for writing */
++static int hso_serial_write_room(struct tty_struct *tty)
++{
++      struct hso_serial *serial = tty->driver_data;
++      int room;
++      unsigned long flags;
++
++      spin_lock_irqsave(&serial->serial_lock, flags);
++      room = serial->tx_data_length - serial->tx_buffer_count;
++      spin_unlock_irqrestore(&serial->serial_lock, flags);
++
++      /* return free room */
++      return room;
++}
++
++/* setup the term */
++static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old)
++{
++      struct hso_serial *serial = tty->driver_data;
++      unsigned long flags;
++
++      if (old)
++              D5("Termios called with: cflags new[%d] - old[%d]",
++                 tty->termios.c_cflag, old->c_cflag);
++
++      /* the actual setup */
++      spin_lock_irqsave(&serial->serial_lock, flags);
++      if (atomic_read(&serial->port.count))
++              _hso_serial_set_termios(tty, old);
++      else
++              tty->termios = *old;
++      spin_unlock_irqrestore(&serial->serial_lock, flags);
++
++      /* done */
++}
++
++/* how many characters in the buffer */
++static int hso_serial_chars_in_buffer(struct tty_struct *tty)
++{
++      struct hso_serial *serial = tty->driver_data;
++      int chars;
++      unsigned long flags;
++
++      /* sanity check */
++      if (serial == NULL)
++              return 0;
++
++      spin_lock_irqsave(&serial->serial_lock, flags);
++      chars = serial->tx_buffer_count;
++      spin_unlock_irqrestore(&serial->serial_lock, flags);
++
++      return chars;
++}
++static int tiocmget_submit_urb(struct hso_serial *serial,
++                             struct hso_tiocmget *tiocmget,
++                             struct usb_device *usb)
++{
++      int result;
++
++      if (serial->parent->usb_gone)
++              return -ENODEV;
++      usb_fill_int_urb(tiocmget->urb, usb,
++                       usb_rcvintpipe(usb,
++                                      tiocmget->endp->
++                                      bEndpointAddress & 0x7F),
++                       &tiocmget->serial_state_notification,
++                       sizeof(struct hso_serial_state_notification),
++                       tiocmget_intr_callback, serial,
++                       tiocmget->endp->bInterval);
++      result = usb_submit_urb(tiocmget->urb, GFP_ATOMIC);
++      if (result) {
++              dev_warn(&usb->dev, "%s usb_submit_urb failed %d\n", __func__,
++                       result);
++      }
++      return result;
++
++}
++
++static void tiocmget_intr_callback(struct urb *urb)
++{
++      struct hso_serial *serial = urb->context;
++      struct hso_tiocmget *tiocmget;
++      int status = urb->status;
++      u16 UART_state_bitmap, prev_UART_state_bitmap;
++      struct uart_icount *icount;
++      struct hso_serial_state_notification *serial_state_notification;
++      struct usb_device *usb;
++      int if_num;
++
++      /* Sanity checks */
++      if (!serial)
++              return;
++      if (status) {
++              handle_usb_error(status, __func__, serial->parent);
++              return;
++      }
++
++      /* tiocmget is only supported on HSO_PORT_MODEM */
++      tiocmget = serial->tiocmget;
++      if (!tiocmget)
++              return;
++      BUG_ON((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM);
++
++      usb = serial->parent->usb;
++      if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber;
++
++      /* wIndex should be the USB interface number of the port to which the
++       * notification applies, which should always be the Modem port.
++       */
++      serial_state_notification = &tiocmget->serial_state_notification;
++      if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE ||
++          serial_state_notification->bNotification != B_NOTIFICATION ||
++          le16_to_cpu(serial_state_notification->wValue) != W_VALUE ||
++          le16_to_cpu(serial_state_notification->wIndex) != if_num ||
++          le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) {
++              dev_warn(&usb->dev,
++                       "hso received invalid serial state notification\n");
++              DUMP(serial_state_notification,
++                   sizeof(struct hso_serial_state_notification));
++      } else {
++
++              UART_state_bitmap = le16_to_cpu(serial_state_notification->
++                                              UART_state_bitmap);
++              prev_UART_state_bitmap = tiocmget->prev_UART_state_bitmap;
++              icount = &tiocmget->icount;
++              spin_lock(&serial->serial_lock);
++              if ((UART_state_bitmap & B_OVERRUN) !=
++                 (prev_UART_state_bitmap & B_OVERRUN))
++                      icount->parity++;
++              if ((UART_state_bitmap & B_PARITY) !=
++                 (prev_UART_state_bitmap & B_PARITY))
++                      icount->parity++;
++              if ((UART_state_bitmap & B_FRAMING) !=
++                 (prev_UART_state_bitmap & B_FRAMING))
++                      icount->frame++;
++              if ((UART_state_bitmap & B_RING_SIGNAL) &&
++                 !(prev_UART_state_bitmap & B_RING_SIGNAL))
++                      icount->rng++;
++              if ((UART_state_bitmap & B_BREAK) !=
++                 (prev_UART_state_bitmap & B_BREAK))
++                      icount->brk++;
++              if ((UART_state_bitmap & B_TX_CARRIER) !=
++                 (prev_UART_state_bitmap & B_TX_CARRIER))
++                      icount->dsr++;
++              if ((UART_state_bitmap & B_RX_CARRIER) !=
++                 (prev_UART_state_bitmap & B_RX_CARRIER))
++                      icount->dcd++;
++              tiocmget->prev_UART_state_bitmap = UART_state_bitmap;
++              spin_unlock(&serial->serial_lock);
++              tiocmget->intr_completed = 1;
++              wake_up_interruptible(&tiocmget->waitq);
++      }
++      memset(serial_state_notification, 0,
++             sizeof(struct hso_serial_state_notification));
++      tiocmget_submit_urb(serial,
++                          tiocmget,
++                          serial->parent->usb);
++}
++
++/*
++ * next few functions largely stolen from drivers/serial/serial_core.c
++ */
++/* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
++ * - mask passed in arg for lines of interest
++ *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
++ * Caller should use TIOCGICOUNT to see which one it was
++ */
++static int
++hso_wait_modem_status(struct hso_serial *serial, unsigned long arg)
++{
++      DECLARE_WAITQUEUE(wait, current);
++      struct uart_icount cprev, cnow;
++      struct hso_tiocmget  *tiocmget;
++      int ret;
++
++      tiocmget = serial->tiocmget;
++      if (!tiocmget)
++              return -ENOENT;
++      /*
++       * note the counters on entry
++       */
++      spin_lock_irq(&serial->serial_lock);
++      memcpy(&cprev, &tiocmget->icount, sizeof(struct uart_icount));
++      spin_unlock_irq(&serial->serial_lock);
++      add_wait_queue(&tiocmget->waitq, &wait);
++      for (;;) {
++              spin_lock_irq(&serial->serial_lock);
++              memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
++              spin_unlock_irq(&serial->serial_lock);
++              set_current_state(TASK_INTERRUPTIBLE);
++              if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
++                  ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
++                  ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd))) {
++                      ret = 0;
++                      break;
++              }
++              schedule();
++              /* see if a signal did it */
++              if (signal_pending(current)) {
++                      ret = -ERESTARTSYS;
++                      break;
++              }
++              cprev = cnow;
++      }
++      current->state = TASK_RUNNING;
++      remove_wait_queue(&tiocmget->waitq, &wait);
++
++      return ret;
++}
++
++/*
++ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
++ * Return: write counters to the user passed counter struct
++ * NB: both 1->0 and 0->1 transitions are counted except for
++ *     RI where only 0->1 is counted.
++ */
++static int hso_get_count(struct tty_struct *tty,
++                struct serial_icounter_struct *icount)
++{
++      struct uart_icount cnow;
++      struct hso_serial *serial = tty->driver_data;
++      struct hso_tiocmget  *tiocmget = serial->tiocmget;
++
++      memset(icount, 0, sizeof(struct serial_icounter_struct));
++
++      if (!tiocmget)
++               return -ENOENT;
++      spin_lock_irq(&serial->serial_lock);
++      memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
++      spin_unlock_irq(&serial->serial_lock);
++
++      icount->cts         = cnow.cts;
++      icount->dsr         = cnow.dsr;
++      icount->rng         = cnow.rng;
++      icount->dcd         = cnow.dcd;
++      icount->rx          = cnow.rx;
++      icount->tx          = cnow.tx;
++      icount->frame       = cnow.frame;
++      icount->overrun     = cnow.overrun;
++      icount->parity      = cnow.parity;
++      icount->brk         = cnow.brk;
++      icount->buf_overrun = cnow.buf_overrun;
++
++      return 0;
++}
++
++
++static int hso_serial_tiocmget(struct tty_struct *tty)
++{
++      int retval;
++      struct hso_serial *serial = tty->driver_data;
++      struct hso_tiocmget  *tiocmget;
++      u16 UART_state_bitmap;
++
++      /* sanity check */
++      if (!serial) {
++              D1("no tty structures");
++              return -EINVAL;
++      }
++      spin_lock_irq(&serial->serial_lock);
++      retval = ((serial->rts_state) ? TIOCM_RTS : 0) |
++          ((serial->dtr_state) ? TIOCM_DTR : 0);
++      tiocmget = serial->tiocmget;
++      if (tiocmget) {
++
++              UART_state_bitmap = le16_to_cpu(
++                      tiocmget->prev_UART_state_bitmap);
++              if (UART_state_bitmap & B_RING_SIGNAL)
++                      retval |=  TIOCM_RNG;
++              if (UART_state_bitmap & B_RX_CARRIER)
++                      retval |=  TIOCM_CD;
++              if (UART_state_bitmap & B_TX_CARRIER)
++                      retval |=  TIOCM_DSR;
++      }
++      spin_unlock_irq(&serial->serial_lock);
++      return retval;
++}
++
++static int hso_serial_tiocmset(struct tty_struct *tty,
++                             unsigned int set, unsigned int clear)
++{
++      int val = 0;
++      unsigned long flags;
++      int if_num;
++      struct hso_serial *serial = tty->driver_data;
++
++      /* sanity check */
++      if (!serial) {
++              D1("no tty structures");
++              return -EINVAL;
++      }
++
++      if ((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM)
++              return -EINVAL;
++
++      if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber;
++
++      spin_lock_irqsave(&serial->serial_lock, flags);
++      if (set & TIOCM_RTS)
++              serial->rts_state = 1;
++      if (set & TIOCM_DTR)
++              serial->dtr_state = 1;
++
++      if (clear & TIOCM_RTS)
++              serial->rts_state = 0;
++      if (clear & TIOCM_DTR)
++              serial->dtr_state = 0;
++
++      if (serial->dtr_state)
++              val |= 0x01;
++      if (serial->rts_state)
++              val |= 0x02;
++
++      spin_unlock_irqrestore(&serial->serial_lock, flags);
++
++      return usb_control_msg(serial->parent->usb,
++                             usb_rcvctrlpipe(serial->parent->usb, 0), 0x22,
++                             0x21, val, if_num, NULL, 0,
++                             USB_CTRL_SET_TIMEOUT);
++}
++
++static int hso_serial_ioctl(struct tty_struct *tty,
++                          unsigned int cmd, unsigned long arg)
++{
++      struct hso_serial *serial = tty->driver_data;
++      int ret = 0;
++      D4("IOCTL cmd: %d, arg: %ld", cmd, arg);
++
++      if (!serial)
++              return -ENODEV;
++      switch (cmd) {
++      case TIOCMIWAIT:
++              ret = hso_wait_modem_status(serial, arg);
++              break;
++      default:
++              ret = -ENOIOCTLCMD;
++              break;
++      }
++      return ret;
++}
++
++
++/* starts a transmit */
++static void hso_kick_transmit(struct hso_serial *serial)
++{
++      u8 *temp;
++      unsigned long flags;
++      int res;
++
++      spin_lock_irqsave(&serial->serial_lock, flags);
++      if (!serial->tx_buffer_count)
++              goto out;
++
++      if (serial->tx_urb_used)
++              goto out;
++
++      /* Wakeup USB interface if necessary */
++      if (hso_get_activity(serial->parent) == -EAGAIN)
++              goto out;
++
++      /* Switch pointers around to avoid memcpy */
++      temp = serial->tx_buffer;
++      serial->tx_buffer = serial->tx_data;
++      serial->tx_data = temp;
++      serial->tx_data_count = serial->tx_buffer_count;
++      serial->tx_buffer_count = 0;
++
++      /* If temp is set, it means we switched buffers */
++      if (temp && serial->write_data) {
++              res = serial->write_data(serial);
++              if (res >= 0)
++                      serial->tx_urb_used = 1;
++      }
++out:
++      spin_unlock_irqrestore(&serial->serial_lock, flags);
++}
++
++/* make a request (for reading and writing data to muxed serial port) */
++static int mux_device_request(struct hso_serial *serial, u8 type, u16 port,
++                            struct urb *ctrl_urb,
++                            struct usb_ctrlrequest *ctrl_req,
++                            u8 *ctrl_urb_data, u32 size)
++{
++      int result;
++      int pipe;
++
++      /* Sanity check */
++      if (!serial || !ctrl_urb || !ctrl_req) {
++              printk(KERN_ERR "%s: Wrong arguments\n", __func__);
++              return -EINVAL;
++      }
++
++      /* initialize */
++      ctrl_req->wValue = 0;
++      ctrl_req->wIndex = cpu_to_le16(hso_port_to_mux(port));
++      ctrl_req->wLength = cpu_to_le16(size);
++
++      if (type == USB_CDC_GET_ENCAPSULATED_RESPONSE) {
++              /* Reading command */
++              ctrl_req->bRequestType = USB_DIR_IN |
++                                       USB_TYPE_OPTION_VENDOR |
++                                       USB_RECIP_INTERFACE;
++              ctrl_req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
++              pipe = usb_rcvctrlpipe(serial->parent->usb, 0);
++      } else {
++              /* Writing command */
++              ctrl_req->bRequestType = USB_DIR_OUT |
++                                       USB_TYPE_OPTION_VENDOR |
++                                       USB_RECIP_INTERFACE;
++              ctrl_req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
++              pipe = usb_sndctrlpipe(serial->parent->usb, 0);
++      }
++      /* syslog */
++      D2("%s command (%02x) len: %d, port: %d",
++         type == USB_CDC_GET_ENCAPSULATED_RESPONSE ? "Read" : "Write",
++         ctrl_req->bRequestType, ctrl_req->wLength, port);
++
++      /* Load ctrl urb */
++      ctrl_urb->transfer_flags = 0;
++      usb_fill_control_urb(ctrl_urb,
++                           serial->parent->usb,
++                           pipe,
++                           (u8 *) ctrl_req,
++                           ctrl_urb_data, size, ctrl_callback, serial);
++      /* Send it on merry way */
++      result = usb_submit_urb(ctrl_urb, GFP_ATOMIC);
++      if (result) {
++              dev_err(&ctrl_urb->dev->dev,
++                      "%s failed submit ctrl_urb %d type %d\n", __func__,
++                      result, type);
++              return result;
++      }
++
++      /* done */
++      return size;
++}
++
++/* called by intr_callback when read occurs */
++static int hso_mux_serial_read(struct hso_serial *serial)
++{
++      if (!serial)
++              return -EINVAL;
++
++      /* clean data */
++      memset(serial->rx_data[0], 0, CTRL_URB_RX_SIZE);
++      /* make the request */
++
++      if (serial->num_rx_urbs != 1) {
++              dev_err(&serial->parent->interface->dev,
++                      "ERROR: mux'd reads with multiple buffers "
++                      "not possible\n");
++              return 0;
++      }
++      return mux_device_request(serial,
++                                USB_CDC_GET_ENCAPSULATED_RESPONSE,
++                                serial->parent->port_spec & HSO_PORT_MASK,
++                                serial->rx_urb[0],
++                                &serial->ctrl_req_rx,
++                                serial->rx_data[0], serial->rx_data_length);
++}
++
++/* used for muxed serial port callback (muxed serial read) */
++static void intr_callback(struct urb *urb)
++{
++      struct hso_shared_int *shared_int = urb->context;
++      struct hso_serial *serial;
++      unsigned char *port_req;
++      int status = urb->status;
++      int i;
++
++      usb_mark_last_busy(urb->dev);
++
++      /* sanity check */
++      if (!shared_int)
++              return;
++
++      /* status check */
++      if (status) {
++              handle_usb_error(status, __func__, NULL);
++              return;
++      }
++      D4("\n--- Got intr callback 0x%02X ---", status);
++
++      /* what request? */
++      port_req = urb->transfer_buffer;
++      D4(" port_req = 0x%.2X\n", *port_req);
++      /* loop over all muxed ports to find the one sending this */
++      for (i = 0; i < 8; i++) {
++              /* max 8 channels on MUX */
++              if (*port_req & (1 << i)) {
++                      serial = get_serial_by_shared_int_and_type(shared_int,
++                                                                 (1 << i));
++                      if (serial != NULL) {
++                              D1("Pending read interrupt on port %d\n", i);
++                              spin_lock(&serial->serial_lock);
++                              if (serial->rx_state == RX_IDLE &&
++                                      atomic_read(&serial->port.count) > 0) {
++                                      /* Setup and send a ctrl req read on
++                                       * port i */
++                                      if (!serial->rx_urb_filled[0]) {
++                                              serial->rx_state = RX_SENT;
++                                              hso_mux_serial_read(serial);
++                                      } else
++                                              serial->rx_state = RX_PENDING;
++                              } else {
++                                      D1("Already a read pending on "
++                                         "port %d or port not open\n", i);
++                              }
++                              spin_unlock(&serial->serial_lock);
++                      }
++              }
++      }
++      /* Resubmit interrupt urb */
++      hso_mux_submit_intr_urb(shared_int, urb->dev, GFP_ATOMIC);
++}
++
++/* called for writing to muxed serial port */
++static int hso_mux_serial_write_data(struct hso_serial *serial)
++{
++      if (NULL == serial)
++              return -EINVAL;
++
++      return mux_device_request(serial,
++                                USB_CDC_SEND_ENCAPSULATED_COMMAND,
++                                serial->parent->port_spec & HSO_PORT_MASK,
++                                serial->tx_urb,
++                                &serial->ctrl_req_tx,
++                                serial->tx_data, serial->tx_data_count);
++}
++
++/* write callback for Diag and CS port */
++static void hso_std_serial_write_bulk_callback(struct urb *urb)
++{
++      struct hso_serial *serial = urb->context;
++      int status = urb->status;
++
++      /* sanity check */
++      if (!serial) {
++              D1("serial == NULL");
++              return;
++      }
++
++      spin_lock(&serial->serial_lock);
++      serial->tx_urb_used = 0;
++      spin_unlock(&serial->serial_lock);
++      if (status) {
++              handle_usb_error(status, __func__, serial->parent);
++              return;
++      }
++      hso_put_activity(serial->parent);
++      tty_port_tty_wakeup(&serial->port);
++      hso_kick_transmit(serial);
++
++      D1(" ");
++}
++
++/* called for writing diag or CS serial port */
++static int hso_std_serial_write_data(struct hso_serial *serial)
++{
++      int count = serial->tx_data_count;
++      int result;
++
++      usb_fill_bulk_urb(serial->tx_urb,
++                        serial->parent->usb,
++                        usb_sndbulkpipe(serial->parent->usb,
++                                        serial->out_endp->
++                                        bEndpointAddress & 0x7F),
++                        serial->tx_data, serial->tx_data_count,
++                        hso_std_serial_write_bulk_callback, serial);
++
++      result = usb_submit_urb(serial->tx_urb, GFP_ATOMIC);
++      if (result) {
++              dev_warn(&serial->parent->usb->dev,
++                       "Failed to submit urb - res %d\n", result);
++              return result;
++      }
++
++      return count;
++}
++
++/* callback after read or write on muxed serial port */
++static void ctrl_callback(struct urb *urb)
++{
++      struct hso_serial *serial = urb->context;
++      struct usb_ctrlrequest *req;
++      int status = urb->status;
++
++      /* sanity check */
++      if (!serial)
++              return;
++
++      spin_lock(&serial->serial_lock);
++      serial->tx_urb_used = 0;
++      spin_unlock(&serial->serial_lock);
++      if (status) {
++              handle_usb_error(status, __func__, serial->parent);
++              return;
++      }
++
++      /* what request? */
++      req = (struct usb_ctrlrequest *)(urb->setup_packet);
++      D4("\n--- Got muxed ctrl callback 0x%02X ---", status);
++      D4("Actual length of urb = %d\n", urb->actual_length);
++      DUMP1(urb->transfer_buffer, urb->actual_length);
++
++      if (req->bRequestType ==
++          (USB_DIR_IN | USB_TYPE_OPTION_VENDOR | USB_RECIP_INTERFACE)) {
++              /* response to a read command */
++              serial->rx_urb_filled[0] = 1;
++              spin_lock(&serial->serial_lock);
++              put_rxbuf_data_and_resubmit_ctrl_urb(serial);
++              spin_unlock(&serial->serial_lock);
++      } else {
++              hso_put_activity(serial->parent);
++              tty_port_tty_wakeup(&serial->port);
++              /* response to a write command */
++              hso_kick_transmit(serial);
++      }
++}
++
++/* handle RX data for serial port */
++static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
++{
++      struct tty_struct *tty;
++      int count;
++
++      /* Sanity check */
++      if (urb == NULL || serial == NULL) {
++              D1("serial = NULL");
++              return -2;
++      }
++
++      tty = tty_port_tty_get(&serial->port);
++
++      if (tty && test_bit(TTY_THROTTLED, &tty->flags)) {
++              tty_kref_put(tty);
++              return -1;
++      }
++
++      /* Push data to tty */
++      D1("data to push to tty");
++      count = tty_buffer_request_room(&serial->port, urb->actual_length);
++      if (count >= urb->actual_length) {
++              tty_insert_flip_string(&serial->port, urb->transfer_buffer,
++                                     urb->actual_length);
++              tty_flip_buffer_push(&serial->port);
++      } else {
++              dev_warn(&serial->parent->usb->dev,
++                       "dropping data, %d bytes lost\n", urb->actual_length);
++      }
++
++      tty_kref_put(tty);
++
++      serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
++
++      return 0;
++}
++
++
++/* Base driver functions */
++
++static void hso_log_port(struct hso_device *hso_dev)
++{
++      char *port_type;
++      char port_dev[20];
++
++      switch (hso_dev->port_spec & HSO_PORT_MASK) {
++      case HSO_PORT_CONTROL:
++              port_type = "Control";
++              break;
++      case HSO_PORT_APP:
++              port_type = "Application";
++              break;
++      case HSO_PORT_GPS:
++              port_type = "GPS";
++              break;
++      case HSO_PORT_GPS_CONTROL:
++              port_type = "GPS control";
++              break;
++      case HSO_PORT_APP2:
++              port_type = "Application2";
++              break;
++      case HSO_PORT_PCSC:
++              port_type = "PCSC";
++              break;
++      case HSO_PORT_DIAG:
++              port_type = "Diagnostic";
++              break;
++      case HSO_PORT_DIAG2:
++              port_type = "Diagnostic2";
++              break;
++      case HSO_PORT_MODEM:
++              port_type = "Modem";
++              break;
++      case HSO_PORT_NETWORK:
++              port_type = "Network";
++              break;
++      default:
++              port_type = "Unknown";
++              break;
++      }
++      if ((hso_dev->port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
++              sprintf(port_dev, "%s", dev2net(hso_dev)->net->name);
++      } else
++              sprintf(port_dev, "/dev/%s%d", tty_filename,
++                      dev2ser(hso_dev)->minor);
++
++      dev_dbg(&hso_dev->interface->dev, "HSO: Found %s port %s\n",
++              port_type, port_dev);
++}
++
++static int hso_start_net_device(struct hso_device *hso_dev)
++{
++      int i, result = 0;
++      struct hso_net *hso_net = dev2net(hso_dev);
++
++      if (!hso_net)
++              return -ENODEV;
++
++      /* send URBs for all read buffers */
++      for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
++
++              /* Prep a receive URB */
++              usb_fill_bulk_urb(hso_net->mux_bulk_rx_urb_pool[i],
++                                hso_dev->usb,
++                                usb_rcvbulkpipe(hso_dev->usb,
++                                                hso_net->in_endp->
++                                                bEndpointAddress & 0x7F),
++                                hso_net->mux_bulk_rx_buf_pool[i],
++                                MUX_BULK_RX_BUF_SIZE, read_bulk_callback,
++                                hso_net);
++
++              /* Put it out there so the device can send us stuff */
++              result = usb_submit_urb(hso_net->mux_bulk_rx_urb_pool[i],
++                                      GFP_NOIO);
++              if (result)
++                      dev_warn(&hso_dev->usb->dev,
++                              "%s failed mux_bulk_rx_urb[%d] %d\n", __func__,
++                              i, result);
++      }
++
++      return result;
++}
++
++static int hso_stop_net_device(struct hso_device *hso_dev)
++{
++      int i;
++      struct hso_net *hso_net = dev2net(hso_dev);
++
++      if (!hso_net)
++              return -ENODEV;
++
++      for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
++              if (hso_net->mux_bulk_rx_urb_pool[i])
++                      usb_kill_urb(hso_net->mux_bulk_rx_urb_pool[i]);
++
++      }
++      if (hso_net->mux_bulk_tx_urb)
++              usb_kill_urb(hso_net->mux_bulk_tx_urb);
++
++      return 0;
++}
++
++static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags)
++{
++      int i, result = 0;
++      struct hso_serial *serial = dev2ser(hso_dev);
++
++      if (!serial)
++              return -ENODEV;
++
++      /* If it is not the MUX port fill in and submit a bulk urb (already
++       * allocated in hso_serial_start) */
++      if (!(serial->parent->port_spec & HSO_INTF_MUX)) {
++              for (i = 0; i < serial->num_rx_urbs; i++) {
++                      usb_fill_bulk_urb(serial->rx_urb[i],
++                                        serial->parent->usb,
++                                        usb_rcvbulkpipe(serial->parent->usb,
++                                                        serial->in_endp->
++                                                        bEndpointAddress &
++                                                        0x7F),
++                                        serial->rx_data[i],
++                                        serial->rx_data_length,
++                                        hso_std_serial_read_bulk_callback,
++                                        serial);
++                      result = usb_submit_urb(serial->rx_urb[i], flags);
++                      if (result) {
++                              dev_warn(&serial->parent->usb->dev,
++                                       "Failed to submit urb - res %d\n",
++                                       result);
++                              break;
++                      }
++              }
++      } else {
++              mutex_lock(&serial->shared_int->shared_int_lock);
++              if (!serial->shared_int->use_count) {
++                      result =
++                          hso_mux_submit_intr_urb(serial->shared_int,
++                                                  hso_dev->usb, flags);
++              }
++              serial->shared_int->use_count++;
++              mutex_unlock(&serial->shared_int->shared_int_lock);
++      }
++      if (serial->tiocmget)
++              tiocmget_submit_urb(serial,
++                                  serial->tiocmget,
++                                  serial->parent->usb);
++      return result;
++}
++
++static int hso_stop_serial_device(struct hso_device *hso_dev)
++{
++      int i;
++      struct hso_serial *serial = dev2ser(hso_dev);
++      struct hso_tiocmget  *tiocmget;
++
++      if (!serial)
++              return -ENODEV;
++
++      for (i = 0; i < serial->num_rx_urbs; i++) {
++              if (serial->rx_urb[i]) {
++                              usb_kill_urb(serial->rx_urb[i]);
++                              serial->rx_urb_filled[i] = 0;
++              }
++      }
++      serial->curr_rx_urb_idx = 0;
++
++      if (serial->tx_urb)
++              usb_kill_urb(serial->tx_urb);
++
++      if (serial->shared_int) {
++              mutex_lock(&serial->shared_int->shared_int_lock);
++              if (serial->shared_int->use_count &&
++                  (--serial->shared_int->use_count == 0)) {
++                      struct urb *urb;
++
++                      urb = serial->shared_int->shared_intr_urb;
++                      if (urb)
++                              usb_kill_urb(urb);
++              }
++              mutex_unlock(&serial->shared_int->shared_int_lock);
++      }
++      tiocmget = serial->tiocmget;
++      if (tiocmget) {
++              wake_up_interruptible(&tiocmget->waitq);
++              usb_kill_urb(tiocmget->urb);
++      }
++
++      return 0;
++}
++
++static void hso_serial_common_free(struct hso_serial *serial)
++{
++      int i;
++
++      if (serial->parent->dev)
++              device_remove_file(serial->parent->dev, &dev_attr_hsotype);
++
++      tty_unregister_device(tty_drv, serial->minor);
++
++      for (i = 0; i < serial->num_rx_urbs; i++) {
++              /* unlink and free RX URB */
++              usb_free_urb(serial->rx_urb[i]);
++              /* free the RX buffer */
++              kfree(serial->rx_data[i]);
++      }
++
++      /* unlink and free TX URB */
++      usb_free_urb(serial->tx_urb);
++      kfree(serial->tx_data);
++      tty_port_destroy(&serial->port);
++}
++
++static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
++                                  int rx_size, int tx_size)
++{
++      struct device *dev;
++      int minor;
++      int i;
++
++      tty_port_init(&serial->port);
++
++      minor = get_free_serial_index();
++      if (minor < 0)
++              goto exit;
++
++      /* register our minor number */
++      serial->parent->dev = tty_port_register_device(&serial->port, tty_drv,
++                      minor, &serial->parent->interface->dev);
++      dev = serial->parent->dev;
++      dev_set_drvdata(dev, serial->parent);
++      i = device_create_file(dev, &dev_attr_hsotype);
++
++      /* fill in specific data for later use */
++      serial->minor = minor;
++      serial->magic = HSO_SERIAL_MAGIC;
++      spin_lock_init(&serial->serial_lock);
++      serial->num_rx_urbs = num_urbs;
++
++      /* RX, allocate urb and initialize */
++
++      /* prepare our RX buffer */
++      serial->rx_data_length = rx_size;
++      for (i = 0; i < serial->num_rx_urbs; i++) {
++              serial->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
++              if (!serial->rx_urb[i]) {
++                      dev_err(dev, "Could not allocate urb?\n");
++                      goto exit;
++              }
++              serial->rx_urb[i]->transfer_buffer = NULL;
++              serial->rx_urb[i]->transfer_buffer_length = 0;
++              serial->rx_data[i] = kzalloc(serial->rx_data_length,
++                                           GFP_KERNEL);
++              if (!serial->rx_data[i])
++                      goto exit;
++      }
++
++      /* TX, allocate urb and initialize */
++      serial->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
++      if (!serial->tx_urb) {
++              dev_err(dev, "Could not allocate urb?\n");
++              goto exit;
++      }
++      serial->tx_urb->transfer_buffer = NULL;
++      serial->tx_urb->transfer_buffer_length = 0;
++      /* prepare our TX buffer */
++      serial->tx_data_count = 0;
++      serial->tx_buffer_count = 0;
++      serial->tx_data_length = tx_size;
++      serial->tx_data = kzalloc(serial->tx_data_length, GFP_KERNEL);
++      if (!serial->tx_data)
++              goto exit;
++
++      serial->tx_buffer = kzalloc(serial->tx_data_length, GFP_KERNEL);
++      if (!serial->tx_buffer)
++              goto exit;
++
++      return 0;
++exit:
++      hso_serial_common_free(serial);
++      return -1;
++}
++
++/* Creates a general hso device */
++static struct hso_device *hso_create_device(struct usb_interface *intf,
++                                          int port_spec)
++{
++      struct hso_device *hso_dev;
++
++      hso_dev = kzalloc(sizeof(*hso_dev), GFP_ATOMIC);
++      if (!hso_dev)
++              return NULL;
++
++      hso_dev->port_spec = port_spec;
++      hso_dev->usb = interface_to_usbdev(intf);
++      hso_dev->interface = intf;
++      kref_init(&hso_dev->ref);
++      mutex_init(&hso_dev->mutex);
++
++      INIT_WORK(&hso_dev->async_get_intf, async_get_intf);
++      INIT_WORK(&hso_dev->async_put_intf, async_put_intf);
++      INIT_WORK(&hso_dev->reset_device, reset_device);
++
++      return hso_dev;
++}
++
++/* Removes a network device in the network device table */
++static int remove_net_device(struct hso_device *hso_dev)
++{
++      int i;
++
++      for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
++              if (network_table[i] == hso_dev) {
++                      network_table[i] = NULL;
++                      break;
++              }
++      }
++      if (i == HSO_MAX_NET_DEVICES)
++              return -1;
++      return 0;
++}
++
++/* Frees our network device */
++static void hso_free_net_device(struct hso_device *hso_dev)
++{
++      int i;
++      struct hso_net *hso_net = dev2net(hso_dev);
++
++      if (!hso_net)
++              return;
++
++      remove_net_device(hso_net->parent);
++
++      if (hso_net->net)
++              unregister_netdev(hso_net->net);
++
++      /* start freeing */
++      for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
++              usb_free_urb(hso_net->mux_bulk_rx_urb_pool[i]);
++              kfree(hso_net->mux_bulk_rx_buf_pool[i]);
++              hso_net->mux_bulk_rx_buf_pool[i] = NULL;
++      }
++      usb_free_urb(hso_net->mux_bulk_tx_urb);
++      kfree(hso_net->mux_bulk_tx_buf);
++      hso_net->mux_bulk_tx_buf = NULL;
++
++      if (hso_net->net)
++              free_netdev(hso_net->net);
++
++      kfree(hso_dev);
++}
++
++static const struct net_device_ops hso_netdev_ops = {
++      .ndo_open       = hso_net_open,
++      .ndo_stop       = hso_net_close,
++      .ndo_start_xmit = hso_net_start_xmit,
++      .ndo_tx_timeout = hso_net_tx_timeout,
++};
++
++/* initialize the network interface */
++static void hso_net_init(struct net_device *net)
++{
++      struct hso_net *hso_net = netdev_priv(net);
++
++      D1("sizeof hso_net is %d", (int)sizeof(*hso_net));
++
++      /* fill in the other fields */
++      net->netdev_ops = &hso_netdev_ops;
++      net->watchdog_timeo = HSO_NET_TX_TIMEOUT;
++      net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
++      net->type = ARPHRD_NONE;
++      net->mtu = DEFAULT_MTU - 14;
++      net->tx_queue_len = 10;
++      net->ethtool_ops = &ops;
++
++      /* and initialize the semaphore */
++      spin_lock_init(&hso_net->net_lock);
++}
++
++/* Adds a network device in the network device table */
++static int add_net_device(struct hso_device *hso_dev)
++{
++      int i;
++
++      for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
++              if (network_table[i] == NULL) {
++                      network_table[i] = hso_dev;
++                      break;
++              }
++      }
++      if (i == HSO_MAX_NET_DEVICES)
++              return -1;
++      return 0;
++}
++
++static int hso_rfkill_set_block(void *data, bool blocked)
++{
++      struct hso_device *hso_dev = data;
++      int enabled = !blocked;
++      int rv;
++
++      mutex_lock(&hso_dev->mutex);
++      if (hso_dev->usb_gone)
++              rv = 0;
++      else
++              rv = usb_control_msg(hso_dev->usb, usb_rcvctrlpipe(hso_dev->usb, 0),
++                                     enabled ? 0x82 : 0x81, 0x40, 0, 0, NULL, 0,
++                                     USB_CTRL_SET_TIMEOUT);
++      mutex_unlock(&hso_dev->mutex);
++      return rv;
++}
++
++static const struct rfkill_ops hso_rfkill_ops = {
++      .set_block = hso_rfkill_set_block,
++};
++
++/* Creates and sets up everything for rfkill */
++static void hso_create_rfkill(struct hso_device *hso_dev,
++                           struct usb_interface *interface)
++{
++      struct hso_net *hso_net = dev2net(hso_dev);
++      struct device *dev = &hso_net->net->dev;
++      char *rfkn;
++
++      rfkn = kzalloc(20, GFP_KERNEL);
++      if (!rfkn)
++              dev_err(dev, "%s - Out of memory\n", __func__);
++
++      snprintf(rfkn, 20, "hso-%d",
++               interface->altsetting->desc.bInterfaceNumber);
++
++      hso_net->rfkill = rfkill_alloc(rfkn,
++                                     &interface_to_usbdev(interface)->dev,
++                                     RFKILL_TYPE_WWAN,
++                                     &hso_rfkill_ops, hso_dev);
++      if (!hso_net->rfkill) {
++              dev_err(dev, "%s - Out of memory\n", __func__);
++              kfree(rfkn);
++              return;
++      }
++      if (rfkill_register(hso_net->rfkill) < 0) {
++              rfkill_destroy(hso_net->rfkill);
++              kfree(rfkn);
++              hso_net->rfkill = NULL;
++              dev_err(dev, "%s - Failed to register rfkill\n", __func__);
++              return;
++      }
++}
++
++static struct device_type hso_type = {
++      .name   = "wwan",
++};
++
++/* Creates our network device */
++static struct hso_device *hso_create_net_device(struct usb_interface *interface,
++                                              int port_spec)
++{
++      int result, i;
++      struct net_device *net;
++      struct hso_net *hso_net;
++      struct hso_device *hso_dev;
++
++      hso_dev = hso_create_device(interface, port_spec);
++      if (!hso_dev)
++              return NULL;
++
++      /* allocate our network device, then we can put in our private data */
++      /* call hso_net_init to do the basic initialization */
++      net = alloc_netdev(sizeof(struct hso_net), "hso%d", NET_NAME_UNKNOWN,
++                         hso_net_init);
++      if (!net) {
++              dev_err(&interface->dev, "Unable to create ethernet device\n");
++              goto exit;
++      }
++
++      hso_net = netdev_priv(net);
++
++      hso_dev->port_data.dev_net = hso_net;
++      hso_net->net = net;
++      hso_net->parent = hso_dev;
++
++      hso_net->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
++                                    USB_DIR_IN);
++      if (!hso_net->in_endp) {
++              dev_err(&interface->dev, "Can't find BULK IN endpoint\n");
++              goto exit;
++      }
++      hso_net->out_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
++                                     USB_DIR_OUT);
++      if (!hso_net->out_endp) {
++              dev_err(&interface->dev, "Can't find BULK OUT endpoint\n");
++              goto exit;
++      }
++      SET_NETDEV_DEV(net, &interface->dev);
++      SET_NETDEV_DEVTYPE(net, &hso_type);
++
++      /* registering our net device */
++      result = register_netdev(net);
++      if (result) {
++              dev_err(&interface->dev, "Failed to register device\n");
++              goto exit;
++      }
++
++      /* start allocating */
++      for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
++              hso_net->mux_bulk_rx_urb_pool[i] = usb_alloc_urb(0, GFP_KERNEL);
++              if (!hso_net->mux_bulk_rx_urb_pool[i]) {
++                      dev_err(&interface->dev, "Could not allocate rx urb\n");
++                      goto exit;
++              }
++              hso_net->mux_bulk_rx_buf_pool[i] = kzalloc(MUX_BULK_RX_BUF_SIZE,
++                                                         GFP_KERNEL);
++              if (!hso_net->mux_bulk_rx_buf_pool[i])
++                      goto exit;
++      }
++      hso_net->mux_bulk_tx_urb = usb_alloc_urb(0, GFP_KERNEL);
++      if (!hso_net->mux_bulk_tx_urb) {
++              dev_err(&interface->dev, "Could not allocate tx urb\n");
++              goto exit;
++      }
++      hso_net->mux_bulk_tx_buf = kzalloc(MUX_BULK_TX_BUF_SIZE, GFP_KERNEL);
++      if (!hso_net->mux_bulk_tx_buf)
++              goto exit;
++
++      add_net_device(hso_dev);
++
++      hso_log_port(hso_dev);
++
++      hso_create_rfkill(hso_dev, interface);
++
++      return hso_dev;
++exit:
++      hso_free_net_device(hso_dev);
++      return NULL;
++}
++
++static void hso_free_tiomget(struct hso_serial *serial)
++{
++      struct hso_tiocmget *tiocmget;
++      if (!serial)
++              return;
++      tiocmget = serial->tiocmget;
++      if (tiocmget) {
++              usb_free_urb(tiocmget->urb);
++              tiocmget->urb = NULL;
++              serial->tiocmget = NULL;
++              kfree(tiocmget);
++      }
++}
++
++/* Frees an AT channel ( goes for both mux and non-mux ) */
++static void hso_free_serial_device(struct hso_device *hso_dev)
++{
++      struct hso_serial *serial = dev2ser(hso_dev);
++
++      if (!serial)
++              return;
++      set_serial_by_index(serial->minor, NULL);
++
++      hso_serial_common_free(serial);
++
++      if (serial->shared_int) {
++              mutex_lock(&serial->shared_int->shared_int_lock);
++              if (--serial->shared_int->ref_count == 0)
++                      hso_free_shared_int(serial->shared_int);
++              else
++                      mutex_unlock(&serial->shared_int->shared_int_lock);
++      }
++      hso_free_tiomget(serial);
++      kfree(serial);
++      kfree(hso_dev);
++}
++
++/* Creates a bulk AT channel */
++static struct hso_device *hso_create_bulk_serial_device(
++                      struct usb_interface *interface, int port)
++{
++      struct hso_device *hso_dev;
++      struct hso_serial *serial;
++      int num_urbs;
++      struct hso_tiocmget *tiocmget;
++
++      hso_dev = hso_create_device(interface, port);
++      if (!hso_dev)
++              return NULL;
++
++      serial = kzalloc(sizeof(*serial), GFP_KERNEL);
++      if (!serial)
++              goto exit;
++
++      serial->parent = hso_dev;
++      hso_dev->port_data.dev_serial = serial;
++
++      if ((port & HSO_PORT_MASK) == HSO_PORT_MODEM) {
++              num_urbs = 2;
++              serial->tiocmget = kzalloc(sizeof(struct hso_tiocmget),
++                                         GFP_KERNEL);
++              /* it isn't going to break our heart if serial->tiocmget
++               *  allocation fails don't bother checking this.
++               */
++              if (serial->tiocmget) {
++                      tiocmget = serial->tiocmget;
++                      tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL);
++                      if (tiocmget->urb) {
++                              mutex_init(&tiocmget->mutex);
++                              init_waitqueue_head(&tiocmget->waitq);
++                              tiocmget->endp = hso_get_ep(
++                                      interface,
++                                      USB_ENDPOINT_XFER_INT,
++                                      USB_DIR_IN);
++                      } else
++                              hso_free_tiomget(serial);
++              }
++      }
++      else
++              num_urbs = 1;
++
++      if (hso_serial_common_create(serial, num_urbs, BULK_URB_RX_SIZE,
++                                   BULK_URB_TX_SIZE))
++              goto exit;
++
++      serial->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
++                                   USB_DIR_IN);
++      if (!serial->in_endp) {
++              dev_err(&interface->dev, "Failed to find BULK IN ep\n");
++              goto exit2;
++      }
++
++      if (!
++          (serial->out_endp =
++           hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, USB_DIR_OUT))) {
++              dev_err(&interface->dev, "Failed to find BULK IN ep\n");
++              goto exit2;
++      }
++
++      serial->write_data = hso_std_serial_write_data;
++
++      /* and record this serial */
++      set_serial_by_index(serial->minor, serial);
++
++      /* setup the proc dirs and files if needed */
++      hso_log_port(hso_dev);
++
++      /* done, return it */
++      return hso_dev;
++
++exit2:
++      hso_serial_common_free(serial);
++exit:
++      hso_free_tiomget(serial);
++      kfree(serial);
++      kfree(hso_dev);
++      return NULL;
++}
++
++/* Creates a multiplexed AT channel */
++static
++struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface,
++                                              int port,
++                                              struct hso_shared_int *mux)
++{
++      struct hso_device *hso_dev;
++      struct hso_serial *serial;
++      int port_spec;
++
++      port_spec = HSO_INTF_MUX;
++      port_spec &= ~HSO_PORT_MASK;
++
++      port_spec |= hso_mux_to_port(port);
++      if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NO_PORT)
++              return NULL;
++
++      hso_dev = hso_create_device(interface, port_spec);
++      if (!hso_dev)
++              return NULL;
++
++      serial = kzalloc(sizeof(*serial), GFP_KERNEL);
++      if (!serial)
++              goto exit;
++
++      hso_dev->port_data.dev_serial = serial;
++      serial->parent = hso_dev;
++
++      if (hso_serial_common_create
++          (serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE))
++              goto exit;
++
++      serial->tx_data_length--;
++      serial->write_data = hso_mux_serial_write_data;
++
++      serial->shared_int = mux;
++      mutex_lock(&serial->shared_int->shared_int_lock);
++      serial->shared_int->ref_count++;
++      mutex_unlock(&serial->shared_int->shared_int_lock);
++
++      /* and record this serial */
++      set_serial_by_index(serial->minor, serial);
++
++      /* setup the proc dirs and files if needed */
++      hso_log_port(hso_dev);
++
++      /* done, return it */
++      return hso_dev;
++
++exit:
++      if (serial) {
++              tty_unregister_device(tty_drv, serial->minor);
++              kfree(serial);
++      }
++      if (hso_dev)
++              kfree(hso_dev);
++      return NULL;
++
++}
++
++static void hso_free_shared_int(struct hso_shared_int *mux)
++{
++      usb_free_urb(mux->shared_intr_urb);
++      kfree(mux->shared_intr_buf);
++      mutex_unlock(&mux->shared_int_lock);
++      kfree(mux);
++}
++
++static
++struct hso_shared_int *hso_create_shared_int(struct usb_interface *interface)
++{
++      struct hso_shared_int *mux = kzalloc(sizeof(*mux), GFP_KERNEL);
++
++      if (!mux)
++              return NULL;
++
++      mux->intr_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_INT,
++                                  USB_DIR_IN);
++      if (!mux->intr_endp) {
++              dev_err(&interface->dev, "Can't find INT IN endpoint\n");
++              goto exit;
++      }
++
++      mux->shared_intr_urb = usb_alloc_urb(0, GFP_KERNEL);
++      if (!mux->shared_intr_urb) {
++              dev_err(&interface->dev, "Could not allocate intr urb?\n");
++              goto exit;
++      }
++      mux->shared_intr_buf =
++              kzalloc(le16_to_cpu(mux->intr_endp->wMaxPacketSize),
++                      GFP_KERNEL);
++      if (!mux->shared_intr_buf)
++              goto exit;
++
++      mutex_init(&mux->shared_int_lock);
++
++      return mux;
++
++exit:
++      kfree(mux->shared_intr_buf);
++      usb_free_urb(mux->shared_intr_urb);
++      kfree(mux);
++      return NULL;
++}
++
++/* Gets the port spec for a certain interface */
++static int hso_get_config_data(struct usb_interface *interface)
++{
++      struct usb_device *usbdev = interface_to_usbdev(interface);
++      u8 *config_data = kmalloc(17, GFP_KERNEL);
++      u32 if_num = interface->altsetting->desc.bInterfaceNumber;
++      s32 result;
++
++      if (!config_data)
++              return -ENOMEM;
++      if (usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0),
++                          0x86, 0xC0, 0, 0, config_data, 17,
++                          USB_CTRL_SET_TIMEOUT) != 0x11) {
++              kfree(config_data);
++              return -EIO;
++      }
++
++      switch (config_data[if_num]) {
++      case 0x0:
++              result = 0;
++              break;
++      case 0x1:
++              result = HSO_PORT_DIAG;
++              break;
++      case 0x2:
++              result = HSO_PORT_GPS;
++              break;
++      case 0x3:
++              result = HSO_PORT_GPS_CONTROL;
++              break;
++      case 0x4:
++              result = HSO_PORT_APP;
++              break;
++      case 0x5:
++              result = HSO_PORT_APP2;
++              break;
++      case 0x6:
++              result = HSO_PORT_CONTROL;
++              break;
++      case 0x7:
++              result = HSO_PORT_NETWORK;
++              break;
++      case 0x8:
++              result = HSO_PORT_MODEM;
++              break;
++      case 0x9:
++              result = HSO_PORT_MSD;
++              break;
++      case 0xa:
++              result = HSO_PORT_PCSC;
++              break;
++      case 0xb:
++              result = HSO_PORT_VOICE;
++              break;
++      default:
++              result = 0;
++      }
++
++      if (result)
++              result |= HSO_INTF_BULK;
++
++      if (config_data[16] & 0x1)
++              result |= HSO_INFO_CRC_BUG;
++
++      kfree(config_data);
++      return result;
++}
++
++/* called once for each interface upon device insertion */
++static int hso_probe(struct usb_interface *interface,
++                   const struct usb_device_id *id)
++{
++      int mux, i, if_num, port_spec;
++      unsigned char port_mask;
++      struct hso_device *hso_dev = NULL;
++      struct hso_shared_int *shared_int;
++      struct hso_device *tmp_dev = NULL;
++
++      if (interface->cur_altsetting->desc.bInterfaceClass != 0xFF) {
++              dev_err(&interface->dev, "Not our interface\n");
++              return -ENODEV;
++      }
++
++      if_num = interface->altsetting->desc.bInterfaceNumber;
++
++      /* Get the interface/port specification from either driver_info or from
++       * the device itself */
++      if (id->driver_info)
++              port_spec = ((u32 *)(id->driver_info))[if_num];
++      else
++              port_spec = hso_get_config_data(interface);
++
++      /* Check if we need to switch to alt interfaces prior to port
++       * configuration */
++      if (interface->num_altsetting > 1)
++              usb_set_interface(interface_to_usbdev(interface), if_num, 1);
++      interface->needs_remote_wakeup = 1;
++
++      /* Allocate new hso device(s) */
++      switch (port_spec & HSO_INTF_MASK) {
++      case HSO_INTF_MUX:
++              if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
++                      /* Create the network device */
++                      if (!disable_net) {
++                              hso_dev = hso_create_net_device(interface,
++                                                              port_spec);
++                              if (!hso_dev)
++                                      goto exit;
++                              tmp_dev = hso_dev;
++                      }
++              }
++
++              if (hso_get_mux_ports(interface, &port_mask))
++                      /* TODO: de-allocate everything */
++                      goto exit;
++
++              shared_int = hso_create_shared_int(interface);
++              if (!shared_int)
++                      goto exit;
++
++              for (i = 1, mux = 0; i < 0x100; i = i << 1, mux++) {
++                      if (port_mask & i) {
++                              hso_dev = hso_create_mux_serial_device(
++                                              interface, i, shared_int);
++                              if (!hso_dev)
++                                      goto exit;
++                      }
++              }
++
++              if (tmp_dev)
++                      hso_dev = tmp_dev;
++              break;
++
++      case HSO_INTF_BULK:
++              /* It's a regular bulk interface */
++              if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
++                      if (!disable_net)
++                              hso_dev =
++                                  hso_create_net_device(interface, port_spec);
++              } else {
++                      hso_dev =
++                          hso_create_bulk_serial_device(interface, port_spec);
++              }
++              if (!hso_dev)
++                      goto exit;
++              break;
++      default:
++              goto exit;
++      }
++
++      /* save our data pointer in this device */
++      usb_set_intfdata(interface, hso_dev);
++
++      /* done */
++      return 0;
++exit:
++      hso_free_interface(interface);
++      return -ENODEV;
++}
++
++/* device removed, cleaning up */
++static void hso_disconnect(struct usb_interface *interface)
++{
++      hso_free_interface(interface);
++
++      /* remove reference of our private data */
++      usb_set_intfdata(interface, NULL);
++}
++
++static void async_get_intf(struct work_struct *data)
++{
++      struct hso_device *hso_dev =
++          container_of(data, struct hso_device, async_get_intf);
++      usb_autopm_get_interface(hso_dev->interface);
++}
++
++static void async_put_intf(struct work_struct *data)
++{
++      struct hso_device *hso_dev =
++          container_of(data, struct hso_device, async_put_intf);
++      usb_autopm_put_interface(hso_dev->interface);
++}
++
++static int hso_get_activity(struct hso_device *hso_dev)
++{
++      if (hso_dev->usb->state == USB_STATE_SUSPENDED) {
++              if (!hso_dev->is_active) {
++                      hso_dev->is_active = 1;
++                      schedule_work(&hso_dev->async_get_intf);
++              }
++      }
++
++      if (hso_dev->usb->state != USB_STATE_CONFIGURED)
++              return -EAGAIN;
++
++      usb_mark_last_busy(hso_dev->usb);
++
++      return 0;
++}
++
++static int hso_put_activity(struct hso_device *hso_dev)
++{
++      if (hso_dev->usb->state != USB_STATE_SUSPENDED) {
++              if (hso_dev->is_active) {
++                      hso_dev->is_active = 0;
++                      schedule_work(&hso_dev->async_put_intf);
++                      return -EAGAIN;
++              }
++      }
++      hso_dev->is_active = 0;
++      return 0;
++}
++
++/* called by kernel when we need to suspend device */
++static int hso_suspend(struct usb_interface *iface, pm_message_t message)
++{
++      int i, result;
++
++      /* Stop all serial ports */
++      for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
++              if (serial_table[i] && (serial_table[i]->interface == iface)) {
++                      result = hso_stop_serial_device(serial_table[i]);
++                      if (result)
++                              goto out;
++              }
++      }
++
++      /* Stop all network ports */
++      for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
++              if (network_table[i] &&
++                  (network_table[i]->interface == iface)) {
++                      result = hso_stop_net_device(network_table[i]);
++                      if (result)
++                              goto out;
++              }
++      }
++
++out:
++      return 0;
++}
++
++/* called by kernel when we need to resume device */
++static int hso_resume(struct usb_interface *iface)
++{
++      int i, result = 0;
++      struct hso_net *hso_net;
++
++      /* Start all serial ports */
++      for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
++              if (serial_table[i] && (serial_table[i]->interface == iface)) {
++                      if (atomic_read(&dev2ser(serial_table[i])->port.count)) {
++                              result =
++                                  hso_start_serial_device(serial_table[i], GFP_NOIO);
++                              hso_kick_transmit(dev2ser(serial_table[i]));
++                              if (result)
++                                      goto out;
++                      }
++              }
++      }
++
++      /* Start all network ports */
++      for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
++              if (network_table[i] &&
++                  (network_table[i]->interface == iface)) {
++                      hso_net = dev2net(network_table[i]);
++                      if (hso_net->flags & IFF_UP) {
++                              /* First transmit any lingering data,
++                                 then restart the device. */
++                              if (hso_net->skb_tx_buf) {
++                                      dev_dbg(&iface->dev,
++                                              "Transmitting"
++                                              " lingering data\n");
++                                      hso_net_start_xmit(hso_net->skb_tx_buf,
++                                                         hso_net->net);
++                                      hso_net->skb_tx_buf = NULL;
++                              }
++                              result = hso_start_net_device(network_table[i]);
++                              if (result)
++                                      goto out;
++                      }
++              }
++      }
++
++out:
++      return result;
++}
++
++static void reset_device(struct work_struct *data)
++{
++      struct hso_device *hso_dev =
++          container_of(data, struct hso_device, reset_device);
++      struct usb_device *usb = hso_dev->usb;
++      int result;
++
++      if (hso_dev->usb_gone) {
++              D1("No reset during disconnect\n");
++      } else {
++              result = usb_lock_device_for_reset(usb, hso_dev->interface);
++              if (result < 0)
++                      D1("unable to lock device for reset: %d\n", result);
++              else {
++                      usb_reset_device(usb);
++                      usb_unlock_device(usb);
++              }
++      }
++}
++
++static void hso_serial_ref_free(struct kref *ref)
++{
++      struct hso_device *hso_dev = container_of(ref, struct hso_device, ref);
++
++      hso_free_serial_device(hso_dev);
++}
++
++static void hso_free_interface(struct usb_interface *interface)
++{
++      struct hso_serial *hso_dev;
++      int i;
++
++      for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
++              if (serial_table[i] &&
++                  (serial_table[i]->interface == interface)) {
++                      hso_dev = dev2ser(serial_table[i]);
++                      tty_port_tty_hangup(&hso_dev->port, false);
++                      mutex_lock(&hso_dev->parent->mutex);
++                      hso_dev->parent->usb_gone = 1;
++                      mutex_unlock(&hso_dev->parent->mutex);
++                      kref_put(&serial_table[i]->ref, hso_serial_ref_free);
++              }
++      }
++
++      for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
++              if (network_table[i] &&
++                  (network_table[i]->interface == interface)) {
++                      struct rfkill *rfk = dev2net(network_table[i])->rfkill;
++                      /* hso_stop_net_device doesn't stop the net queue since
++                       * traffic needs to start it again when suspended */
++                      netif_stop_queue(dev2net(network_table[i])->net);
++                      hso_stop_net_device(network_table[i]);
++                      cancel_work_sync(&network_table[i]->async_put_intf);
++                      cancel_work_sync(&network_table[i]->async_get_intf);
++                      if (rfk) {
++                              rfkill_unregister(rfk);
++                              rfkill_destroy(rfk);
++                      }
++                      hso_free_net_device(network_table[i]);
++              }
++      }
++}
++
++/* Helper functions */
++
++/* Get the endpoint ! */
++static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
++                                                int type, int dir)
++{
++      int i;
++      struct usb_host_interface *iface = intf->cur_altsetting;
++      struct usb_endpoint_descriptor *endp;
++
++      for (i = 0; i < iface->desc.bNumEndpoints; i++) {
++              endp = &iface->endpoint[i].desc;
++              if (((endp->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == dir) &&
++                  (usb_endpoint_type(endp) == type))
++                      return endp;
++      }
++
++      return NULL;
++}
++
++/* Get the byte that describes which ports are enabled */
++static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports)
++{
++      int i;
++      struct usb_host_interface *iface = intf->cur_altsetting;
++
++      if (iface->extralen == 3) {
++              *ports = iface->extra[2];
++              return 0;
++      }
++
++      for (i = 0; i < iface->desc.bNumEndpoints; i++) {
++              if (iface->endpoint[i].extralen == 3) {
++                      *ports = iface->endpoint[i].extra[2];
++                      return 0;
++              }
++      }
++
++      return -1;
++}
++
++/* interrupt urb needs to be submitted, used for serial read of muxed port */
++static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int,
++                                 struct usb_device *usb, gfp_t gfp)
++{
++      int result;
++
++      usb_fill_int_urb(shared_int->shared_intr_urb, usb,
++                       usb_rcvintpipe(usb,
++                              shared_int->intr_endp->bEndpointAddress & 0x7F),
++                       shared_int->shared_intr_buf,
++                       1,
++                       intr_callback, shared_int,
++                       shared_int->intr_endp->bInterval);
++
++      result = usb_submit_urb(shared_int->shared_intr_urb, gfp);
++      if (result)
++              dev_warn(&usb->dev, "%s failed mux_intr_urb %d\n", __func__,
++                      result);
++
++      return result;
++}
++
++/* operations setup of the serial interface */
++static const struct tty_operations hso_serial_ops = {
++      .open = hso_serial_open,
++      .close = hso_serial_close,
++      .write = hso_serial_write,
++      .write_room = hso_serial_write_room,
++      .ioctl = hso_serial_ioctl,
++      .set_termios = hso_serial_set_termios,
++      .chars_in_buffer = hso_serial_chars_in_buffer,
++      .tiocmget = hso_serial_tiocmget,
++      .tiocmset = hso_serial_tiocmset,
++      .get_icount = hso_get_count,
++      .unthrottle = hso_unthrottle
++};
++
++static struct usb_driver hso_driver = {
++      .name = driver_name,
++      .probe = hso_probe,
++      .disconnect = hso_disconnect,
++      .id_table = hso_ids,
++      .suspend = hso_suspend,
++      .resume = hso_resume,
++      .reset_resume = hso_resume,
++      .supports_autosuspend = 1,
++      .disable_hub_initiated_lpm = 1,
++};
++
++static int __init hso_init(void)
++{
++      int i;
++      int result;
++
++      /* put it in the log */
++      printk(KERN_INFO "hso: %s\n", version);
++
++      /* Initialise the serial table semaphore and table */
++      spin_lock_init(&serial_table_lock);
++      for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++)
++              serial_table[i] = NULL;
++
++      /* allocate our driver using the proper amount of supported minors */
++      tty_drv = alloc_tty_driver(HSO_SERIAL_TTY_MINORS);
++      if (!tty_drv)
++              return -ENOMEM;
++
++      /* fill in all needed values */
++      tty_drv->driver_name = driver_name;
++      tty_drv->name = tty_filename;
++
++      /* if major number is provided as parameter, use that one */
++      if (tty_major)
++              tty_drv->major = tty_major;
++
++      tty_drv->minor_start = 0;
++      tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
++      tty_drv->subtype = SERIAL_TYPE_NORMAL;
++      tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
++      tty_drv->init_termios = tty_std_termios;
++      hso_init_termios(&tty_drv->init_termios);
++      tty_set_operations(tty_drv, &hso_serial_ops);
++
++      /* register the tty driver */
++      result = tty_register_driver(tty_drv);
++      if (result) {
++              printk(KERN_ERR "%s - tty_register_driver failed(%d)\n",
++                      __func__, result);
++              goto err_free_tty;
++      }
++
++      /* register this module as an usb driver */
++      result = usb_register(&hso_driver);
++      if (result) {
++              printk(KERN_ERR "Could not register hso driver? error: %d\n",
++                      result);
++              goto err_unreg_tty;
++      }
++
++      /* done */
++      return 0;
++err_unreg_tty:
++      tty_unregister_driver(tty_drv);
++err_free_tty:
++      put_tty_driver(tty_drv);
++      return result;
++}
++
++static void __exit hso_exit(void)
++{
++      printk(KERN_INFO "hso: unloaded\n");
++
++      tty_unregister_driver(tty_drv);
++      put_tty_driver(tty_drv);
++      /* deregister the usb driver */
++      usb_deregister(&hso_driver);
++}
++
++/* Module definitions */
++module_init(hso_init);
++module_exit(hso_exit);
++
++MODULE_AUTHOR(MOD_AUTHOR);
++MODULE_DESCRIPTION(MOD_DESCRIPTION);
++MODULE_LICENSE(MOD_LICENSE);
++
++/* change the debug level (eg: insmod hso.ko debug=0x04) */
++MODULE_PARM_DESC(debug, "Level of debug [0x01 | 0x02 | 0x04 | 0x08 | 0x10]");
++module_param(debug, int, S_IRUGO | S_IWUSR);
++
++/* set the major tty number (eg: insmod hso.ko tty_major=245) */
++MODULE_PARM_DESC(tty_major, "Set the major tty number");
++module_param(tty_major, int, S_IRUGO | S_IWUSR);
++
++/* disable network interface (eg: insmod hso.ko disable_net=1) */
++MODULE_PARM_DESC(disable_net, "Disable the network interface");
++module_param(disable_net, int, S_IRUGO | S_IWUSR);
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/huawei_cdc_ncm.c backports-3.18.1-1/drivers/net/usb/huawei_cdc_ncm.c
+--- backports-3.18.1-1.org/drivers/net/usb/huawei_cdc_ncm.c    1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/huawei_cdc_ncm.c        2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,221 @@
++/* huawei_cdc_ncm.c - handles Huawei devices using the CDC NCM protocol as
++ * transport layer.
++ * Copyright (C) 2013  Enrico Mioso <mrkiko.rs@gmail.com>
++ *
++ *
++ * ABSTRACT:
++ * This driver handles devices resembling the CDC NCM standard, but
++ * encapsulating another protocol inside it. An example are some Huawei 3G
++ * devices, exposing an embedded AT channel where you can set up the NCM
++ * connection.
++ * This code has been heavily inspired by the cdc_mbim.c driver, which is
++ * Copyright (c) 2012  Smith Micro Software, Inc.
++ * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <linux/ethtool.h>
++#include <linux/if_vlan.h>
++#include <linux/ip.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/usb/cdc.h>
++#include <linux/usb/usbnet.h>
++#include <linux/usb/cdc-wdm.h>
++#include <linux/usb/cdc_ncm.h>
++
++/* Driver data */
++struct huawei_cdc_ncm_state {
++      struct cdc_ncm_ctx *ctx;
++      atomic_t pmcount;
++      struct usb_driver *subdriver;
++      struct usb_interface *control;
++      struct usb_interface *data;
++};
++
++static int huawei_cdc_ncm_manage_power(struct usbnet *usbnet_dev, int on)
++{
++      struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
++      int rv;
++
++      if ((on && atomic_add_return(1, &drvstate->pmcount) == 1) ||
++                      (!on && atomic_dec_and_test(&drvstate->pmcount))) {
++              rv = usb_autopm_get_interface(usbnet_dev->intf);
++              usbnet_dev->intf->needs_remote_wakeup = on;
++              if (!rv)
++                      usb_autopm_put_interface(usbnet_dev->intf);
++      }
++      return 0;
++}
++
++static int huawei_cdc_ncm_wdm_manage_power(struct usb_interface *intf,
++                                         int status)
++{
++      struct usbnet *usbnet_dev = usb_get_intfdata(intf);
++
++      /* can be called while disconnecting */
++      if (!usbnet_dev)
++              return 0;
++
++      return huawei_cdc_ncm_manage_power(usbnet_dev, status);
++}
++
++
++static int huawei_cdc_ncm_bind(struct usbnet *usbnet_dev,
++                             struct usb_interface *intf)
++{
++      struct cdc_ncm_ctx *ctx;
++      struct usb_driver *subdriver = ERR_PTR(-ENODEV);
++      int ret = -ENODEV;
++      struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
++
++      /* altsetting should always be 1 for NCM devices - so we hard-coded
++       * it here
++       */
++      ret = cdc_ncm_bind_common(usbnet_dev, intf, 1);
++      if (ret)
++              goto err;
++
++      ctx = drvstate->ctx;
++
++      if (usbnet_dev->status)
++              /* The wMaxCommand buffer must be big enough to hold
++               * any message from the modem. Experience has shown
++               * that some replies are more than 256 bytes long
++               */
++              subdriver = usb_cdc_wdm_register(ctx->control,
++                                               &usbnet_dev->status->desc,
++                                               1024, /* wMaxCommand */
++                                               huawei_cdc_ncm_wdm_manage_power);
++      if (IS_ERR(subdriver)) {
++              ret = PTR_ERR(subdriver);
++              cdc_ncm_unbind(usbnet_dev, intf);
++              goto err;
++      }
++
++      /* Prevent usbnet from using the status descriptor */
++      usbnet_dev->status = NULL;
++
++      drvstate->subdriver = subdriver;
++
++err:
++      return ret;
++}
++
++static void huawei_cdc_ncm_unbind(struct usbnet *usbnet_dev,
++                                struct usb_interface *intf)
++{
++      struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
++      struct cdc_ncm_ctx *ctx = drvstate->ctx;
++
++      if (drvstate->subdriver && drvstate->subdriver->disconnect)
++              drvstate->subdriver->disconnect(ctx->control);
++      drvstate->subdriver = NULL;
++
++      cdc_ncm_unbind(usbnet_dev, intf);
++}
++
++static int huawei_cdc_ncm_suspend(struct usb_interface *intf,
++                                pm_message_t message)
++{
++      int ret = 0;
++      struct usbnet *usbnet_dev = usb_get_intfdata(intf);
++      struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
++      struct cdc_ncm_ctx *ctx = drvstate->ctx;
++
++      if (ctx == NULL) {
++              ret = -ENODEV;
++              goto error;
++      }
++
++      ret = usbnet_suspend(intf, message);
++      if (ret < 0)
++              goto error;
++
++      if (intf == ctx->control &&
++              drvstate->subdriver &&
++              drvstate->subdriver->suspend)
++              ret = drvstate->subdriver->suspend(intf, message);
++      if (ret < 0)
++              usbnet_resume(intf);
++
++error:
++      return ret;
++}
++
++static int huawei_cdc_ncm_resume(struct usb_interface *intf)
++{
++      int ret = 0;
++      struct usbnet *usbnet_dev = usb_get_intfdata(intf);
++      struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
++      bool callsub;
++      struct cdc_ncm_ctx *ctx = drvstate->ctx;
++
++      /* should we call subdriver's resume function? */
++      callsub =
++              (intf == ctx->control &&
++              drvstate->subdriver &&
++              drvstate->subdriver->resume);
++
++      if (callsub)
++              ret = drvstate->subdriver->resume(intf);
++      if (ret < 0)
++              goto err;
++      ret = usbnet_resume(intf);
++      if (ret < 0 && callsub)
++              drvstate->subdriver->suspend(intf, PMSG_SUSPEND);
++err:
++      return ret;
++}
++
++static const struct driver_info huawei_cdc_ncm_info = {
++      .description = "Huawei CDC NCM device",
++      .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN,
++      .bind = huawei_cdc_ncm_bind,
++      .unbind = huawei_cdc_ncm_unbind,
++      .manage_power = huawei_cdc_ncm_manage_power,
++      .rx_fixup = cdc_ncm_rx_fixup,
++      .tx_fixup = cdc_ncm_tx_fixup,
++};
++
++static const struct usb_device_id huawei_cdc_ncm_devs[] = {
++      /* Huawei NCM devices disguised as vendor specific */
++      { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x16),
++        .driver_info = (unsigned long)&huawei_cdc_ncm_info,
++      },
++      { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x46),
++        .driver_info = (unsigned long)&huawei_cdc_ncm_info,
++      },
++      { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x76),
++        .driver_info = (unsigned long)&huawei_cdc_ncm_info,
++      },
++      { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x03, 0x16),
++        .driver_info = (unsigned long)&huawei_cdc_ncm_info,
++      },
++
++      /* Terminating entry */
++      {
++      },
++};
++MODULE_DEVICE_TABLE(usb, huawei_cdc_ncm_devs);
++
++static struct usb_driver huawei_cdc_ncm_driver = {
++      .name = "huawei_cdc_ncm",
++      .id_table = huawei_cdc_ncm_devs,
++      .probe = usbnet_probe,
++      .disconnect = usbnet_disconnect,
++      .suspend = huawei_cdc_ncm_suspend,
++      .resume = huawei_cdc_ncm_resume,
++      .reset_resume = huawei_cdc_ncm_resume,
++      .supports_autosuspend = 1,
++      .disable_hub_initiated_lpm = 1,
++};
++module_usb_driver(huawei_cdc_ncm_driver);
++MODULE_AUTHOR("Enrico Mioso <mrkiko.rs@gmail.com>");
++MODULE_DESCRIPTION("USB CDC NCM host driver with encapsulated protocol support");
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/int51x1.c backports-3.18.1-1/drivers/net/usb/int51x1.c
+--- backports-3.18.1-1.org/drivers/net/usb/int51x1.c   1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/int51x1.c       2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,199 @@
++/*
++ * Copyright (c) 2009 Peter Holik
++ *
++ * Intellon usb PLC (Powerline Communications) usb net driver
++ *
++ * http://www.tandel.be/downloads/INT51X1_Datasheet.pdf
++ *
++ * Based on the work of Jan 'RedBully' Seiffert
++ */
++
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or.
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/module.h>
++#include <linux/ctype.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/slab.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/usb/usbnet.h>
++
++#define INT51X1_VENDOR_ID     0x09e1
++#define INT51X1_PRODUCT_ID    0x5121
++
++#define INT51X1_HEADER_SIZE   2       /* 2 byte header */
++
++#define PACKET_TYPE_PROMISCUOUS               (1 << 0)
++#define PACKET_TYPE_ALL_MULTICAST     (1 << 1) /* no filter */
++#define PACKET_TYPE_DIRECTED          (1 << 2)
++#define PACKET_TYPE_BROADCAST         (1 << 3)
++#define PACKET_TYPE_MULTICAST         (1 << 4) /* filtered */
++
++#define SET_ETHERNET_PACKET_FILTER    0x43
++
++static int int51x1_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
++{
++      int len;
++
++      if (!(pskb_may_pull(skb, INT51X1_HEADER_SIZE))) {
++              netdev_err(dev->net, "unexpected tiny rx frame\n");
++              return 0;
++      }
++
++      len = le16_to_cpu(*(__le16 *)&skb->data[skb->len - 2]);
++
++      skb_trim(skb, len);
++
++      return 1;
++}
++
++static struct sk_buff *int51x1_tx_fixup(struct usbnet *dev,
++              struct sk_buff *skb, gfp_t flags)
++{
++      int pack_len = skb->len;
++      int pack_with_header_len = pack_len + INT51X1_HEADER_SIZE;
++      int headroom = skb_headroom(skb);
++      int tailroom = skb_tailroom(skb);
++      int need_tail = 0;
++      __le16 *len;
++
++      /* if packet and our header is smaler than 64 pad to 64 (+ ZLP) */
++      if ((pack_with_header_len) < dev->maxpacket)
++              need_tail = dev->maxpacket - pack_with_header_len + 1;
++      /*
++       * usbnet would send a ZLP if packetlength mod urbsize == 0 for us,
++       * but we need to know ourself, because this would add to the length
++       * we send down to the device...
++       */
++      else if (!(pack_with_header_len % dev->maxpacket))
++              need_tail = 1;
++
++      if (!skb_cloned(skb) &&
++                      (headroom + tailroom >= need_tail + INT51X1_HEADER_SIZE)) {
++              if (headroom < INT51X1_HEADER_SIZE || tailroom < need_tail) {
++                      skb->data = memmove(skb->head + INT51X1_HEADER_SIZE,
++                                      skb->data, skb->len);
++                      skb_set_tail_pointer(skb, skb->len);
++              }
++      } else {
++              struct sk_buff *skb2;
++
++              skb2 = skb_copy_expand(skb,
++                              INT51X1_HEADER_SIZE,
++                              need_tail,
++                              flags);
++              dev_kfree_skb_any(skb);
++              if (!skb2)
++                      return NULL;
++              skb = skb2;
++      }
++
++      pack_len += need_tail;
++      pack_len &= 0x07ff;
++
++      len = (__le16 *) __skb_push(skb, INT51X1_HEADER_SIZE);
++      *len = cpu_to_le16(pack_len);
++
++      if(need_tail)
++              memset(__skb_put(skb, need_tail), 0, need_tail);
++
++      return skb;
++}
++
++static void int51x1_set_multicast(struct net_device *netdev)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      u16 filter = PACKET_TYPE_DIRECTED | PACKET_TYPE_BROADCAST;
++
++      if (netdev->flags & IFF_PROMISC) {
++              /* do not expect to see traffic of other PLCs */
++              filter |= PACKET_TYPE_PROMISCUOUS;
++              netdev_info(dev->net, "promiscuous mode enabled\n");
++      } else if (!netdev_mc_empty(netdev) ||
++                (netdev->flags & IFF_ALLMULTI)) {
++              filter |= PACKET_TYPE_ALL_MULTICAST;
++              netdev_dbg(dev->net, "receive all multicast enabled\n");
++      } else {
++              /* ~PROMISCUOUS, ~MULTICAST */
++              netdev_dbg(dev->net, "receive own packets only\n");
++      }
++
++      usbnet_write_cmd_async(dev, SET_ETHERNET_PACKET_FILTER,
++                             USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
++                             filter, 0, NULL, 0);
++}
++
++static const struct net_device_ops int51x1_netdev_ops = {
++      .ndo_open               = usbnet_open,
++      .ndo_stop               = usbnet_stop,
++      .ndo_start_xmit         = usbnet_start_xmit,
++      .ndo_tx_timeout         = usbnet_tx_timeout,
++      .ndo_change_mtu         = usbnet_change_mtu,
++      .ndo_set_mac_address    = eth_mac_addr,
++      .ndo_validate_addr      = eth_validate_addr,
++      .ndo_set_rx_mode        = int51x1_set_multicast,
++};
++
++static int int51x1_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      int status = usbnet_get_ethernet_addr(dev, 3);
++
++      if (status)
++              return status;
++
++      dev->net->hard_header_len += INT51X1_HEADER_SIZE;
++      dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
++      dev->net->netdev_ops = &int51x1_netdev_ops;
++
++      return usbnet_get_endpoints(dev, intf);
++}
++
++static const struct driver_info int51x1_info = {
++      .description = "Intellon usb powerline adapter",
++      .bind        = int51x1_bind,
++      .rx_fixup    = int51x1_rx_fixup,
++      .tx_fixup    = int51x1_tx_fixup,
++      .in          = 1,
++      .out         = 2,
++      .flags       = FLAG_ETHER,
++};
++
++static const struct usb_device_id products[] = {
++      {
++      USB_DEVICE(INT51X1_VENDOR_ID, INT51X1_PRODUCT_ID),
++              .driver_info = (unsigned long) &int51x1_info,
++      },
++      {},
++};
++MODULE_DEVICE_TABLE(usb, products);
++
++static struct usb_driver int51x1_driver = {
++      .name       = "int51x1",
++      .id_table   = products,
++      .probe      = usbnet_probe,
++      .disconnect = usbnet_disconnect,
++      .suspend    = usbnet_suspend,
++      .resume     = usbnet_resume,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(int51x1_driver);
++
++MODULE_AUTHOR("Peter Holik");
++MODULE_DESCRIPTION("Intellon usb powerline adapter");
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/ipheth.c backports-3.18.1-1/drivers/net/usb/ipheth.c
+--- backports-3.18.1-1.org/drivers/net/usb/ipheth.c    1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/ipheth.c        2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,588 @@
++/*
++ * ipheth.c - Apple iPhone USB Ethernet driver
++ *
++ * Copyright (c) 2009 Diego Giagio <diego@giagio.com>
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions and the following disclaimer.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. Neither the name of GIAGIO.COM nor the names of its contributors
++ *    may be used to endorse or promote products derived from this software
++ *    without specific prior written permission.
++ *
++ * Alternatively, provided that this notice is retained in full, this
++ * software may be distributed under the terms of the GNU General
++ * Public License ("GPL") version 2, in which case the provisions of the
++ * GPL apply INSTEAD OF those given above.
++ *
++ * The provided data structures and external interfaces from this code
++ * are not restricted to be used by modules with a GPL compatible license.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
++ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
++ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
++ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
++ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ *
++ *
++ * Attention: iPhone device must be paired, otherwise it won't respond to our
++ * driver. For more info: http://giagio.com/wiki/moin.cgi/iPhoneEthernetDriver
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/usb.h>
++#include <linux/workqueue.h>
++
++#define USB_VENDOR_APPLE        0x05ac
++#define USB_PRODUCT_IPHONE      0x1290
++#define USB_PRODUCT_IPHONE_3G   0x1292
++#define USB_PRODUCT_IPHONE_3GS  0x1294
++#define USB_PRODUCT_IPHONE_4  0x1297
++#define USB_PRODUCT_IPAD 0x129a
++#define USB_PRODUCT_IPAD_2    0x12a2
++#define USB_PRODUCT_IPAD_3    0x12a6
++#define USB_PRODUCT_IPAD_MINI    0x12ab
++#define USB_PRODUCT_IPHONE_4_VZW 0x129c
++#define USB_PRODUCT_IPHONE_4S 0x12a0
++#define USB_PRODUCT_IPHONE_5  0x12a8
++
++#define IPHETH_USBINTF_CLASS    255
++#define IPHETH_USBINTF_SUBCLASS 253
++#define IPHETH_USBINTF_PROTO    1
++
++#define IPHETH_BUF_SIZE         1516
++#define IPHETH_IP_ALIGN               2       /* padding at front of URB */
++#define IPHETH_TX_TIMEOUT       (5 * HZ)
++
++#define IPHETH_INTFNUM          2
++#define IPHETH_ALT_INTFNUM      1
++
++#define IPHETH_CTRL_ENDP        0x00
++#define IPHETH_CTRL_BUF_SIZE    0x40
++#define IPHETH_CTRL_TIMEOUT     (5 * HZ)
++
++#define IPHETH_CMD_GET_MACADDR   0x00
++#define IPHETH_CMD_CARRIER_CHECK 0x45
++
++#define IPHETH_CARRIER_CHECK_TIMEOUT round_jiffies_relative(1 * HZ)
++#define IPHETH_CARRIER_ON       0x04
++
++static struct usb_device_id ipheth_table[] = {
++      { USB_DEVICE_AND_INTERFACE_INFO(
++              USB_VENDOR_APPLE, USB_PRODUCT_IPHONE,
++              IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
++              IPHETH_USBINTF_PROTO) },
++      { USB_DEVICE_AND_INTERFACE_INFO(
++              USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_3G,
++              IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
++              IPHETH_USBINTF_PROTO) },
++      { USB_DEVICE_AND_INTERFACE_INFO(
++              USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_3GS,
++              IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
++              IPHETH_USBINTF_PROTO) },
++      { USB_DEVICE_AND_INTERFACE_INFO(
++              USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4,
++              IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
++              IPHETH_USBINTF_PROTO) },
++      { USB_DEVICE_AND_INTERFACE_INFO(
++              USB_VENDOR_APPLE, USB_PRODUCT_IPAD,
++              IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
++              IPHETH_USBINTF_PROTO) },
++      { USB_DEVICE_AND_INTERFACE_INFO(
++              USB_VENDOR_APPLE, USB_PRODUCT_IPAD_2,
++              IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
++              IPHETH_USBINTF_PROTO) },
++      { USB_DEVICE_AND_INTERFACE_INFO(
++              USB_VENDOR_APPLE, USB_PRODUCT_IPAD_3,
++              IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
++              IPHETH_USBINTF_PROTO) },
++      { USB_DEVICE_AND_INTERFACE_INFO(
++              USB_VENDOR_APPLE, USB_PRODUCT_IPAD_MINI,
++              IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
++              IPHETH_USBINTF_PROTO) },
++      { USB_DEVICE_AND_INTERFACE_INFO(
++              USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4_VZW,
++              IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
++              IPHETH_USBINTF_PROTO) },
++      { USB_DEVICE_AND_INTERFACE_INFO(
++              USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4S,
++              IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
++              IPHETH_USBINTF_PROTO) },
++      { USB_DEVICE_AND_INTERFACE_INFO(
++              USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_5,
++              IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
++              IPHETH_USBINTF_PROTO) },
++      { }
++};
++MODULE_DEVICE_TABLE(usb, ipheth_table);
++
++struct ipheth_device {
++      struct usb_device *udev;
++      struct usb_interface *intf;
++      struct net_device *net;
++      struct sk_buff *tx_skb;
++      struct urb *tx_urb;
++      struct urb *rx_urb;
++      unsigned char *tx_buf;
++      unsigned char *rx_buf;
++      unsigned char *ctrl_buf;
++      u8 bulk_in;
++      u8 bulk_out;
++      struct delayed_work carrier_work;
++};
++
++static int ipheth_rx_submit(struct ipheth_device *dev, gfp_t mem_flags);
++
++static int ipheth_alloc_urbs(struct ipheth_device *iphone)
++{
++      struct urb *tx_urb = NULL;
++      struct urb *rx_urb = NULL;
++      u8 *tx_buf = NULL;
++      u8 *rx_buf = NULL;
++
++      tx_urb = usb_alloc_urb(0, GFP_KERNEL);
++      if (tx_urb == NULL)
++              goto error_nomem;
++
++      rx_urb = usb_alloc_urb(0, GFP_KERNEL);
++      if (rx_urb == NULL)
++              goto free_tx_urb;
++
++      tx_buf = usb_alloc_coherent(iphone->udev, IPHETH_BUF_SIZE,
++                                  GFP_KERNEL, &tx_urb->transfer_dma);
++      if (tx_buf == NULL)
++              goto free_rx_urb;
++
++      rx_buf = usb_alloc_coherent(iphone->udev, IPHETH_BUF_SIZE,
++                                  GFP_KERNEL, &rx_urb->transfer_dma);
++      if (rx_buf == NULL)
++              goto free_tx_buf;
++
++
++      iphone->tx_urb = tx_urb;
++      iphone->rx_urb = rx_urb;
++      iphone->tx_buf = tx_buf;
++      iphone->rx_buf = rx_buf;
++      return 0;
++
++free_tx_buf:
++      usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, tx_buf,
++                        tx_urb->transfer_dma);
++free_rx_urb:
++      usb_free_urb(rx_urb);
++free_tx_urb:
++      usb_free_urb(tx_urb);
++error_nomem:
++      return -ENOMEM;
++}
++
++static void ipheth_free_urbs(struct ipheth_device *iphone)
++{
++      usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, iphone->rx_buf,
++                        iphone->rx_urb->transfer_dma);
++      usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, iphone->tx_buf,
++                        iphone->tx_urb->transfer_dma);
++      usb_free_urb(iphone->rx_urb);
++      usb_free_urb(iphone->tx_urb);
++}
++
++static void ipheth_kill_urbs(struct ipheth_device *dev)
++{
++      usb_kill_urb(dev->tx_urb);
++      usb_kill_urb(dev->rx_urb);
++}
++
++static void ipheth_rcvbulk_callback(struct urb *urb)
++{
++      struct ipheth_device *dev;
++      struct sk_buff *skb;
++      int status;
++      char *buf;
++      int len;
++
++      dev = urb->context;
++      if (dev == NULL)
++              return;
++
++      status = urb->status;
++      switch (status) {
++      case -ENOENT:
++      case -ECONNRESET:
++      case -ESHUTDOWN:
++              return;
++      case 0:
++              break;
++      default:
++              dev_err(&dev->intf->dev, "%s: urb status: %d\n",
++                      __func__, status);
++              return;
++      }
++
++      if (urb->actual_length <= IPHETH_IP_ALIGN) {
++              dev->net->stats.rx_length_errors++;
++              return;
++      }
++      len = urb->actual_length - IPHETH_IP_ALIGN;
++      buf = urb->transfer_buffer + IPHETH_IP_ALIGN;
++
++      skb = dev_alloc_skb(len);
++      if (!skb) {
++              dev_err(&dev->intf->dev, "%s: dev_alloc_skb: -ENOMEM\n",
++                      __func__);
++              dev->net->stats.rx_dropped++;
++              return;
++      }
++
++      memcpy(skb_put(skb, len), buf, len);
++      skb->dev = dev->net;
++      skb->protocol = eth_type_trans(skb, dev->net);
++
++      dev->net->stats.rx_packets++;
++      dev->net->stats.rx_bytes += len;
++
++      netif_rx(skb);
++      ipheth_rx_submit(dev, GFP_ATOMIC);
++}
++
++static void ipheth_sndbulk_callback(struct urb *urb)
++{
++      struct ipheth_device *dev;
++      int status = urb->status;
++
++      dev = urb->context;
++      if (dev == NULL)
++              return;
++
++      if (status != 0 &&
++          status != -ENOENT &&
++          status != -ECONNRESET &&
++          status != -ESHUTDOWN)
++              dev_err(&dev->intf->dev, "%s: urb status: %d\n",
++              __func__, status);
++
++      dev_kfree_skb_irq(dev->tx_skb);
++      netif_wake_queue(dev->net);
++}
++
++static int ipheth_carrier_set(struct ipheth_device *dev)
++{
++      struct usb_device *udev = dev->udev;
++      int retval;
++
++      retval = usb_control_msg(udev,
++                      usb_rcvctrlpipe(udev, IPHETH_CTRL_ENDP),
++                      IPHETH_CMD_CARRIER_CHECK, /* request */
++                      0xc0, /* request type */
++                      0x00, /* value */
++                      0x02, /* index */
++                      dev->ctrl_buf, IPHETH_CTRL_BUF_SIZE,
++                      IPHETH_CTRL_TIMEOUT);
++      if (retval < 0) {
++              dev_err(&dev->intf->dev, "%s: usb_control_msg: %d\n",
++                      __func__, retval);
++              return retval;
++      }
++
++      if (dev->ctrl_buf[0] == IPHETH_CARRIER_ON)
++              netif_carrier_on(dev->net);
++      else
++              netif_carrier_off(dev->net);
++
++      return 0;
++}
++
++static void ipheth_carrier_check_work(struct work_struct *work)
++{
++      struct ipheth_device *dev = container_of(work, struct ipheth_device,
++                                               carrier_work.work);
++
++      ipheth_carrier_set(dev);
++      schedule_delayed_work(&dev->carrier_work, IPHETH_CARRIER_CHECK_TIMEOUT);
++}
++
++static int ipheth_get_macaddr(struct ipheth_device *dev)
++{
++      struct usb_device *udev = dev->udev;
++      struct net_device *net = dev->net;
++      int retval;
++
++      retval = usb_control_msg(udev,
++                               usb_rcvctrlpipe(udev, IPHETH_CTRL_ENDP),
++                               IPHETH_CMD_GET_MACADDR, /* request */
++                               0xc0, /* request type */
++                               0x00, /* value */
++                               0x02, /* index */
++                               dev->ctrl_buf,
++                               IPHETH_CTRL_BUF_SIZE,
++                               IPHETH_CTRL_TIMEOUT);
++      if (retval < 0) {
++              dev_err(&dev->intf->dev, "%s: usb_control_msg: %d\n",
++                      __func__, retval);
++      } else if (retval < ETH_ALEN) {
++              dev_err(&dev->intf->dev,
++                      "%s: usb_control_msg: short packet: %d bytes\n",
++                      __func__, retval);
++              retval = -EINVAL;
++      } else {
++              memcpy(net->dev_addr, dev->ctrl_buf, ETH_ALEN);
++              retval = 0;
++      }
++
++      return retval;
++}
++
++static int ipheth_rx_submit(struct ipheth_device *dev, gfp_t mem_flags)
++{
++      struct usb_device *udev = dev->udev;
++      int retval;
++
++      usb_fill_bulk_urb(dev->rx_urb, udev,
++                        usb_rcvbulkpipe(udev, dev->bulk_in),
++                        dev->rx_buf, IPHETH_BUF_SIZE,
++                        ipheth_rcvbulk_callback,
++                        dev);
++      dev->rx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
++
++      retval = usb_submit_urb(dev->rx_urb, mem_flags);
++      if (retval)
++              dev_err(&dev->intf->dev, "%s: usb_submit_urb: %d\n",
++                      __func__, retval);
++      return retval;
++}
++
++static int ipheth_open(struct net_device *net)
++{
++      struct ipheth_device *dev = netdev_priv(net);
++      struct usb_device *udev = dev->udev;
++      int retval = 0;
++
++      usb_set_interface(udev, IPHETH_INTFNUM, IPHETH_ALT_INTFNUM);
++
++      retval = ipheth_carrier_set(dev);
++      if (retval)
++              return retval;
++
++      retval = ipheth_rx_submit(dev, GFP_KERNEL);
++      if (retval)
++              return retval;
++
++      schedule_delayed_work(&dev->carrier_work, IPHETH_CARRIER_CHECK_TIMEOUT);
++      netif_start_queue(net);
++      return retval;
++}
++
++static int ipheth_close(struct net_device *net)
++{
++      struct ipheth_device *dev = netdev_priv(net);
++
++      cancel_delayed_work_sync(&dev->carrier_work);
++      netif_stop_queue(net);
++      return 0;
++}
++
++static int ipheth_tx(struct sk_buff *skb, struct net_device *net)
++{
++      struct ipheth_device *dev = netdev_priv(net);
++      struct usb_device *udev = dev->udev;
++      int retval;
++
++      /* Paranoid */
++      if (skb->len > IPHETH_BUF_SIZE) {
++              WARN(1, "%s: skb too large: %d bytes\n", __func__, skb->len);
++              dev->net->stats.tx_dropped++;
++              dev_kfree_skb_irq(skb);
++              return NETDEV_TX_OK;
++      }
++
++      memcpy(dev->tx_buf, skb->data, skb->len);
++      if (skb->len < IPHETH_BUF_SIZE)
++              memset(dev->tx_buf + skb->len, 0, IPHETH_BUF_SIZE - skb->len);
++
++      usb_fill_bulk_urb(dev->tx_urb, udev,
++                        usb_sndbulkpipe(udev, dev->bulk_out),
++                        dev->tx_buf, IPHETH_BUF_SIZE,
++                        ipheth_sndbulk_callback,
++                        dev);
++      dev->tx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
++
++      retval = usb_submit_urb(dev->tx_urb, GFP_ATOMIC);
++      if (retval) {
++              dev_err(&dev->intf->dev, "%s: usb_submit_urb: %d\n",
++                      __func__, retval);
++              dev->net->stats.tx_errors++;
++              dev_kfree_skb_irq(skb);
++      } else {
++              dev->tx_skb = skb;
++
++              dev->net->stats.tx_packets++;
++              dev->net->stats.tx_bytes += skb->len;
++              netif_stop_queue(net);
++      }
++
++      return NETDEV_TX_OK;
++}
++
++static void ipheth_tx_timeout(struct net_device *net)
++{
++      struct ipheth_device *dev = netdev_priv(net);
++
++      dev_err(&dev->intf->dev, "%s: TX timeout\n", __func__);
++      dev->net->stats.tx_errors++;
++      usb_unlink_urb(dev->tx_urb);
++}
++
++static u32 ipheth_ethtool_op_get_link(struct net_device *net)
++{
++      struct ipheth_device *dev = netdev_priv(net);
++      return netif_carrier_ok(dev->net);
++}
++
++static const struct ethtool_ops ops = {
++      .get_link = ipheth_ethtool_op_get_link
++};
++
++static const struct net_device_ops ipheth_netdev_ops = {
++      .ndo_open = ipheth_open,
++      .ndo_stop = ipheth_close,
++      .ndo_start_xmit = ipheth_tx,
++      .ndo_tx_timeout = ipheth_tx_timeout,
++};
++
++static int ipheth_probe(struct usb_interface *intf,
++                      const struct usb_device_id *id)
++{
++      struct usb_device *udev = interface_to_usbdev(intf);
++      struct usb_host_interface *hintf;
++      struct usb_endpoint_descriptor *endp;
++      struct ipheth_device *dev;
++      struct net_device *netdev;
++      int i;
++      int retval;
++
++      netdev = alloc_etherdev(sizeof(struct ipheth_device));
++      if (!netdev)
++              return -ENOMEM;
++
++      netdev->netdev_ops = &ipheth_netdev_ops;
++      netdev->watchdog_timeo = IPHETH_TX_TIMEOUT;
++      strcpy(netdev->name, "eth%d");
++
++      dev = netdev_priv(netdev);
++      dev->udev = udev;
++      dev->net = netdev;
++      dev->intf = intf;
++
++      /* Set up endpoints */
++      hintf = usb_altnum_to_altsetting(intf, IPHETH_ALT_INTFNUM);
++      if (hintf == NULL) {
++              retval = -ENODEV;
++              dev_err(&intf->dev, "Unable to find alternate settings interface\n");
++              goto err_endpoints;
++      }
++
++      for (i = 0; i < hintf->desc.bNumEndpoints; i++) {
++              endp = &hintf->endpoint[i].desc;
++              if (usb_endpoint_is_bulk_in(endp))
++                      dev->bulk_in = endp->bEndpointAddress;
++              else if (usb_endpoint_is_bulk_out(endp))
++                      dev->bulk_out = endp->bEndpointAddress;
++      }
++      if (!(dev->bulk_in && dev->bulk_out)) {
++              retval = -ENODEV;
++              dev_err(&intf->dev, "Unable to find endpoints\n");
++              goto err_endpoints;
++      }
++
++      dev->ctrl_buf = kmalloc(IPHETH_CTRL_BUF_SIZE, GFP_KERNEL);
++      if (dev->ctrl_buf == NULL) {
++              retval = -ENOMEM;
++              goto err_alloc_ctrl_buf;
++      }
++
++      retval = ipheth_get_macaddr(dev);
++      if (retval)
++              goto err_get_macaddr;
++
++      INIT_DELAYED_WORK(&dev->carrier_work, ipheth_carrier_check_work);
++
++      retval = ipheth_alloc_urbs(dev);
++      if (retval) {
++              dev_err(&intf->dev, "error allocating urbs: %d\n", retval);
++              goto err_alloc_urbs;
++      }
++
++      usb_set_intfdata(intf, dev);
++
++      SET_NETDEV_DEV(netdev, &intf->dev);
++      netdev->ethtool_ops = &ops;
++
++      retval = register_netdev(netdev);
++      if (retval) {
++              dev_err(&intf->dev, "error registering netdev: %d\n", retval);
++              retval = -EIO;
++              goto err_register_netdev;
++      }
++
++      dev_info(&intf->dev, "Apple iPhone USB Ethernet device attached\n");
++      return 0;
++
++err_register_netdev:
++      ipheth_free_urbs(dev);
++err_alloc_urbs:
++err_get_macaddr:
++err_alloc_ctrl_buf:
++      kfree(dev->ctrl_buf);
++err_endpoints:
++      free_netdev(netdev);
++      return retval;
++}
++
++static void ipheth_disconnect(struct usb_interface *intf)
++{
++      struct ipheth_device *dev;
++
++      dev = usb_get_intfdata(intf);
++      if (dev != NULL) {
++              unregister_netdev(dev->net);
++              ipheth_kill_urbs(dev);
++              ipheth_free_urbs(dev);
++              kfree(dev->ctrl_buf);
++              free_netdev(dev->net);
++      }
++      usb_set_intfdata(intf, NULL);
++      dev_info(&intf->dev, "Apple iPhone USB Ethernet now disconnected\n");
++}
++
++static struct usb_driver ipheth_driver = {
++      .name =         "ipheth",
++      .probe =        ipheth_probe,
++      .disconnect =   ipheth_disconnect,
++      .id_table =     ipheth_table,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(ipheth_driver);
++
++MODULE_AUTHOR("Diego Giagio <diego@giagio.com>");
++MODULE_DESCRIPTION("Apple iPhone USB Ethernet driver");
++MODULE_LICENSE("Dual BSD/GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/kalmia.c backports-3.18.1-1/drivers/net/usb/kalmia.c
+--- backports-3.18.1-1.org/drivers/net/usb/kalmia.c    1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/kalmia.c        2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,366 @@
++/*
++ * USB network interface driver for Samsung Kalmia based LTE USB modem like the
++ * Samsung GT-B3730 and GT-B3710.
++ *
++ * Copyright (C) 2011 Marius Bjoernstad Kotsbak <marius@kotsbak.com>
++ *
++ * Sponsored by Quicklink Video Distribution Services Ltd.
++ *
++ * Based on the cdc_eem module.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ctype.h>
++#include <linux/ethtool.h>
++#include <linux/workqueue.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/crc32.h>
++#include <linux/usb/cdc.h>
++#include <linux/usb/usbnet.h>
++#include <linux/gfp.h>
++
++/*
++ * The Samsung Kalmia based LTE USB modems have a CDC ACM port for modem control
++ * handled by the "option" module and an ethernet data port handled by this
++ * module.
++ *
++ * The stick must first be switched into modem mode by usb_modeswitch
++ * or similar tool. Then the modem gets sent two initialization packets by
++ * this module, which gives the MAC address of the device. User space can then
++ * connect the modem using AT commands through the ACM port and then use
++ * DHCP on the network interface exposed by this module. Network packets are
++ * sent to and from the modem in a proprietary format discovered after watching
++ * the behavior of the windows driver for the modem.
++ *
++ * More information about the use of the modem is available in usb_modeswitch
++ * forum and the project page:
++ *
++ * http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=465
++ * https://github.com/mkotsbak/Samsung-GT-B3730-linux-driver
++ */
++
++/* #define    DEBUG */
++/* #define    VERBOSE */
++
++#define KALMIA_HEADER_LENGTH 6
++#define KALMIA_ALIGN_SIZE 4
++#define KALMIA_USB_TIMEOUT 10000
++
++/*-------------------------------------------------------------------------*/
++
++static int
++kalmia_send_init_packet(struct usbnet *dev, u8 *init_msg, u8 init_msg_len,
++      u8 *buffer, u8 expected_len)
++{
++      int act_len;
++      int status;
++
++      netdev_dbg(dev->net, "Sending init packet");
++
++      status = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 0x02),
++              init_msg, init_msg_len, &act_len, KALMIA_USB_TIMEOUT);
++      if (status != 0) {
++              netdev_err(dev->net,
++                      "Error sending init packet. Status %i, length %i\n",
++                      status, act_len);
++              return status;
++      }
++      else if (act_len != init_msg_len) {
++              netdev_err(dev->net,
++                      "Did not send all of init packet. Bytes sent: %i",
++                      act_len);
++      }
++      else {
++              netdev_dbg(dev->net, "Successfully sent init packet.");
++      }
++
++      status = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, 0x81),
++              buffer, expected_len, &act_len, KALMIA_USB_TIMEOUT);
++
++      if (status != 0)
++              netdev_err(dev->net,
++                      "Error receiving init result. Status %i, length %i\n",
++                      status, act_len);
++      else if (act_len != expected_len)
++              netdev_err(dev->net, "Unexpected init result length: %i\n",
++                      act_len);
++
++      return status;
++}
++
++static int
++kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr)
++{
++      static const char init_msg_1[] =
++              { 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00,
++              0x00, 0x00 };
++      static const char init_msg_2[] =
++              { 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0xf4,
++              0x00, 0x00 };
++      static const int buflen = 28;
++      char *usb_buf;
++      int status;
++
++      usb_buf = kmalloc(buflen, GFP_DMA | GFP_KERNEL);
++      if (!usb_buf)
++              return -ENOMEM;
++
++      memcpy(usb_buf, init_msg_1, 12);
++      status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_1)
++              / sizeof(init_msg_1[0]), usb_buf, 24);
++      if (status != 0)
++              return status;
++
++      memcpy(usb_buf, init_msg_2, 12);
++      status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_2)
++              / sizeof(init_msg_2[0]), usb_buf, 28);
++      if (status != 0)
++              return status;
++
++      memcpy(ethernet_addr, usb_buf + 10, ETH_ALEN);
++
++      kfree(usb_buf);
++      return status;
++}
++
++static int
++kalmia_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      int status;
++      u8 ethernet_addr[ETH_ALEN];
++
++      /* Don't bind to AT command interface */
++      if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
++              return -EINVAL;
++
++      dev->in = usb_rcvbulkpipe(dev->udev, 0x81 & USB_ENDPOINT_NUMBER_MASK);
++      dev->out = usb_sndbulkpipe(dev->udev, 0x02 & USB_ENDPOINT_NUMBER_MASK);
++      dev->status = NULL;
++
++      dev->net->hard_header_len += KALMIA_HEADER_LENGTH;
++      dev->hard_mtu = 1400;
++      dev->rx_urb_size = dev->hard_mtu * 10; // Found as optimal after testing
++
++      status = kalmia_init_and_get_ethernet_addr(dev, ethernet_addr);
++
++      if (status < 0) {
++              usb_set_intfdata(intf, NULL);
++              usb_driver_release_interface(driver_of(intf), intf);
++              return status;
++      }
++
++      memcpy(dev->net->dev_addr, ethernet_addr, ETH_ALEN);
++
++      return status;
++}
++
++static struct sk_buff *
++kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
++{
++      struct sk_buff *skb2 = NULL;
++      u16 content_len;
++      unsigned char *header_start;
++      unsigned char ether_type_1, ether_type_2;
++      u8 remainder, padlen = 0;
++
++      if (!skb_cloned(skb)) {
++              int headroom = skb_headroom(skb);
++              int tailroom = skb_tailroom(skb);
++
++              if ((tailroom >= KALMIA_ALIGN_SIZE) && (headroom
++                      >= KALMIA_HEADER_LENGTH))
++                      goto done;
++
++              if ((headroom + tailroom) > (KALMIA_HEADER_LENGTH
++                      + KALMIA_ALIGN_SIZE)) {
++                      skb->data = memmove(skb->head + KALMIA_HEADER_LENGTH,
++                              skb->data, skb->len);
++                      skb_set_tail_pointer(skb, skb->len);
++                      goto done;
++              }
++      }
++
++      skb2 = skb_copy_expand(skb, KALMIA_HEADER_LENGTH,
++              KALMIA_ALIGN_SIZE, flags);
++      if (!skb2)
++              return NULL;
++
++      dev_kfree_skb_any(skb);
++      skb = skb2;
++
++done:
++      header_start = skb_push(skb, KALMIA_HEADER_LENGTH);
++      ether_type_1 = header_start[KALMIA_HEADER_LENGTH + 12];
++      ether_type_2 = header_start[KALMIA_HEADER_LENGTH + 13];
++
++      netdev_dbg(dev->net, "Sending etherType: %02x%02x", ether_type_1,
++              ether_type_2);
++
++      /* According to empiric data for data packages */
++      header_start[0] = 0x57;
++      header_start[1] = 0x44;
++      content_len = skb->len - KALMIA_HEADER_LENGTH;
++
++      put_unaligned_le16(content_len, &header_start[2]);
++      header_start[4] = ether_type_1;
++      header_start[5] = ether_type_2;
++
++      /* Align to 4 bytes by padding with zeros */
++      remainder = skb->len % KALMIA_ALIGN_SIZE;
++      if (remainder > 0) {
++              padlen = KALMIA_ALIGN_SIZE - remainder;
++              memset(skb_put(skb, padlen), 0, padlen);
++      }
++
++      netdev_dbg(dev->net,
++              "Sending package with length %i and padding %i. Header: %6phC.",
++              content_len, padlen, header_start);
++
++      return skb;
++}
++
++static int
++kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
++{
++      /*
++       * Our task here is to strip off framing, leaving skb with one
++       * data frame for the usbnet framework code to process.
++       */
++      static const u8 HEADER_END_OF_USB_PACKET[] =
++              { 0x57, 0x5a, 0x00, 0x00, 0x08, 0x00 };
++      static const u8 EXPECTED_UNKNOWN_HEADER_1[] =
++              { 0x57, 0x43, 0x1e, 0x00, 0x15, 0x02 };
++      static const u8 EXPECTED_UNKNOWN_HEADER_2[] =
++              { 0x57, 0x50, 0x0e, 0x00, 0x00, 0x00 };
++      int i = 0;
++
++      /* incomplete header? */
++      if (skb->len < KALMIA_HEADER_LENGTH)
++              return 0;
++
++      do {
++              struct sk_buff *skb2 = NULL;
++              u8 *header_start;
++              u16 usb_packet_length, ether_packet_length;
++              int is_last;
++
++              header_start = skb->data;
++
++              if (unlikely(header_start[0] != 0x57 || header_start[1] != 0x44)) {
++                      if (!memcmp(header_start, EXPECTED_UNKNOWN_HEADER_1,
++                              sizeof(EXPECTED_UNKNOWN_HEADER_1)) || !memcmp(
++                              header_start, EXPECTED_UNKNOWN_HEADER_2,
++                              sizeof(EXPECTED_UNKNOWN_HEADER_2))) {
++                              netdev_dbg(dev->net,
++                                      "Received expected unknown frame header: %6phC. Package length: %i\n",
++                                      header_start,
++                                      skb->len - KALMIA_HEADER_LENGTH);
++                      }
++                      else {
++                              netdev_err(dev->net,
++                                      "Received unknown frame header: %6phC. Package length: %i\n",
++                                      header_start,
++                                      skb->len - KALMIA_HEADER_LENGTH);
++                              return 0;
++                      }
++              }
++              else
++                      netdev_dbg(dev->net,
++                              "Received header: %6phC. Package length: %i\n",
++                              header_start, skb->len - KALMIA_HEADER_LENGTH);
++
++              /* subtract start header and end header */
++              usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH);
++              ether_packet_length = get_unaligned_le16(&header_start[2]);
++              skb_pull(skb, KALMIA_HEADER_LENGTH);
++
++              /* Some small packets misses end marker */
++              if (usb_packet_length < ether_packet_length) {
++                      ether_packet_length = usb_packet_length
++                              + KALMIA_HEADER_LENGTH;
++                      is_last = true;
++              }
++              else {
++                      netdev_dbg(dev->net, "Correct package length #%i", i
++                              + 1);
++
++                      is_last = (memcmp(skb->data + ether_packet_length,
++                              HEADER_END_OF_USB_PACKET,
++                              sizeof(HEADER_END_OF_USB_PACKET)) == 0);
++                      if (!is_last) {
++                              header_start = skb->data + ether_packet_length;
++                              netdev_dbg(dev->net,
++                                      "End header: %6phC. Package length: %i\n",
++                                      header_start,
++                                      skb->len - KALMIA_HEADER_LENGTH);
++                      }
++              }
++
++              if (is_last) {
++                      skb2 = skb;
++              }
++              else {
++                      skb2 = skb_clone(skb, GFP_ATOMIC);
++                      if (unlikely(!skb2))
++                              return 0;
++              }
++
++              skb_trim(skb2, ether_packet_length);
++
++              if (is_last) {
++                      return 1;
++              }
++              else {
++                      usbnet_skb_return(dev, skb2);
++                      skb_pull(skb, ether_packet_length);
++              }
++
++              i++;
++      }
++      while (skb->len);
++
++      return 1;
++}
++
++static const struct driver_info kalmia_info = {
++      .description = "Samsung Kalmia LTE USB dongle",
++      .flags = FLAG_WWAN,
++      .bind = kalmia_bind,
++      .rx_fixup = kalmia_rx_fixup,
++      .tx_fixup = kalmia_tx_fixup
++};
++
++/*-------------------------------------------------------------------------*/
++
++static const struct usb_device_id products[] = {
++      /* The unswitched USB ID, to get the module auto loaded: */
++      { USB_DEVICE(0x04e8, 0x689a) },
++      /* The stick swithed into modem (by e.g. usb_modeswitch): */
++      { USB_DEVICE(0x04e8, 0x6889),
++              .driver_info = (unsigned long) &kalmia_info, },
++      { /* EMPTY == end of list */} };
++MODULE_DEVICE_TABLE( usb, products);
++
++static struct usb_driver kalmia_driver = {
++      .name = "kalmia",
++      .id_table = products,
++      .probe = usbnet_probe,
++      .disconnect = usbnet_disconnect,
++      .suspend = usbnet_suspend,
++      .resume = usbnet_resume,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(kalmia_driver);
++
++MODULE_AUTHOR("Marius Bjoernstad Kotsbak <marius@kotsbak.com>");
++MODULE_DESCRIPTION("Samsung Kalmia USB network driver");
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/kaweth.c backports-3.18.1-1/drivers/net/usb/kaweth.c
+--- backports-3.18.1-1.org/drivers/net/usb/kaweth.c    1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/kaweth.c        2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,1331 @@
++/****************************************************************
++ *
++ *     kaweth.c - driver for KL5KUSB101 based USB->Ethernet
++ *
++ *     (c) 2000 Interlan Communications
++ *     (c) 2000 Stephane Alnet
++ *     (C) 2001 Brad Hards
++ *     (C) 2002 Oliver Neukum
++ *
++ *     Original author: The Zapman <zapman@interlan.net>
++ *     Inspired by, and much credit goes to Michael Rothwell
++ *     <rothwell@interlan.net> for the test equipment, help, and patience
++ *     Based off of (and with thanks to) Petko Manolov's pegaus.c driver.
++ *     Also many thanks to Joel Silverman and Ed Surprenant at Kawasaki
++ *     for providing the firmware and driver resources.
++ *
++ *     This program is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License as
++ *     published by the Free Software Foundation; either version 2, or
++ *     (at your option) any later version.
++ *
++ *     This program is distributed in the hope that it will be useful,
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ *     You should have received a copy of the GNU General Public License
++ *     along with this program; if not, see <http://www.gnu.org/licenses/>.
++ *
++ ****************************************************************/
++
++/* TODO:
++ * Develop test procedures for USB net interfaces
++ * Run test procedures
++ * Fix bugs from previous two steps
++ * Snoop other OSs for any tricks we're not doing
++ * Reduce arbitrary timeouts
++ * Smart multicast support
++ * Temporary MAC change support
++ * Tunable SOFs parameter - ioctl()?
++ * Ethernet stats collection
++ * Code formatting improvements
++ */
++
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/string.h>
++#include <linux/delay.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/usb.h>
++#include <linux/types.h>
++#include <linux/ethtool.h>
++#include <linux/dma-mapping.h>
++#include <linux/wait.h>
++#include <linux/firmware.h>
++#include <asm/uaccess.h>
++#include <asm/byteorder.h>
++
++#undef DEBUG
++
++#define KAWETH_MTU                    1514
++#define KAWETH_BUF_SIZE                       1664
++#define KAWETH_TX_TIMEOUT             (5 * HZ)
++#define KAWETH_SCRATCH_SIZE           32
++#define KAWETH_FIRMWARE_BUF_SIZE      4096
++#define KAWETH_CONTROL_TIMEOUT                (30000)
++
++#define KAWETH_STATUS_BROKEN          0x0000001
++#define KAWETH_STATUS_CLOSING         0x0000002
++#define KAWETH_STATUS_SUSPENDING      0x0000004
++
++#define KAWETH_STATUS_BLOCKED (KAWETH_STATUS_CLOSING | KAWETH_STATUS_SUSPENDING)
++
++#define KAWETH_PACKET_FILTER_PROMISCUOUS      0x01
++#define KAWETH_PACKET_FILTER_ALL_MULTICAST    0x02
++#define KAWETH_PACKET_FILTER_DIRECTED         0x04
++#define KAWETH_PACKET_FILTER_BROADCAST                0x08
++#define KAWETH_PACKET_FILTER_MULTICAST                0x10
++
++/* Table 7 */
++#define KAWETH_COMMAND_GET_ETHERNET_DESC      0x00
++#define KAWETH_COMMAND_MULTICAST_FILTERS        0x01
++#define KAWETH_COMMAND_SET_PACKET_FILTER      0x02
++#define KAWETH_COMMAND_STATISTICS               0x03
++#define KAWETH_COMMAND_SET_TEMP_MAC           0x06
++#define KAWETH_COMMAND_GET_TEMP_MAC             0x07
++#define KAWETH_COMMAND_SET_URB_SIZE           0x08
++#define KAWETH_COMMAND_SET_SOFS_WAIT          0x09
++#define KAWETH_COMMAND_SCAN                   0xFF
++
++#define KAWETH_SOFS_TO_WAIT                   0x05
++
++#define INTBUFFERSIZE                         4
++
++#define STATE_OFFSET                          0
++#define STATE_MASK                            0x40
++#define       STATE_SHIFT                             5
++
++#define IS_BLOCKED(s) (s & KAWETH_STATUS_BLOCKED)
++
++
++MODULE_AUTHOR("Michael Zappe <zapman@interlan.net>, Stephane Alnet <stephane@u-picardie.fr>, Brad Hards <bhards@bigpond.net.au> and Oliver Neukum <oliver@neukum.org>");
++MODULE_DESCRIPTION("KL5USB101 USB Ethernet driver");
++MODULE_LICENSE("GPL");
++MODULE_FIRMWARE("kaweth/new_code.bin");
++MODULE_FIRMWARE("kaweth/new_code_fix.bin");
++MODULE_FIRMWARE("kaweth/trigger_code.bin");
++MODULE_FIRMWARE("kaweth/trigger_code_fix.bin");
++
++static const char driver_name[] = "kaweth";
++
++static int kaweth_probe(
++              struct usb_interface *intf,
++              const struct usb_device_id *id  /* from id_table */
++      );
++static void kaweth_disconnect(struct usb_interface *intf);
++static int kaweth_internal_control_msg(struct usb_device *usb_dev,
++                                     unsigned int pipe,
++                                     struct usb_ctrlrequest *cmd, void *data,
++                                     int len, int timeout);
++static int kaweth_suspend(struct usb_interface *intf, pm_message_t message);
++static int kaweth_resume(struct usb_interface *intf);
++
++/****************************************************************
++ *     usb_device_id
++ ****************************************************************/
++static struct usb_device_id usb_klsi_table[] = {
++      { USB_DEVICE(0x03e8, 0x0008) }, /* AOX Endpoints USB Ethernet */
++      { USB_DEVICE(0x04bb, 0x0901) }, /* I-O DATA USB-ET/T */
++      { USB_DEVICE(0x0506, 0x03e8) }, /* 3Com 3C19250 */
++      { USB_DEVICE(0x0506, 0x11f8) }, /* 3Com 3C460 */
++      { USB_DEVICE(0x0557, 0x2002) }, /* ATEN USB Ethernet */
++      { USB_DEVICE(0x0557, 0x4000) }, /* D-Link DSB-650C */
++      { USB_DEVICE(0x0565, 0x0002) }, /* Peracom Enet */
++      { USB_DEVICE(0x0565, 0x0003) }, /* Optus@Home UEP1045A */
++      { USB_DEVICE(0x0565, 0x0005) }, /* Peracom Enet2 */
++      { USB_DEVICE(0x05e9, 0x0008) }, /* KLSI KL5KUSB101B */
++      { USB_DEVICE(0x05e9, 0x0009) }, /* KLSI KL5KUSB101B (Board change) */
++      { USB_DEVICE(0x066b, 0x2202) }, /* Linksys USB10T */
++      { USB_DEVICE(0x06e1, 0x0008) }, /* ADS USB-10BT */
++      { USB_DEVICE(0x06e1, 0x0009) }, /* ADS USB-10BT */
++      { USB_DEVICE(0x0707, 0x0100) }, /* SMC 2202USB */
++      { USB_DEVICE(0x07aa, 0x0001) }, /* Correga K.K. */
++      { USB_DEVICE(0x07b8, 0x4000) }, /* D-Link DU-E10 */
++      { USB_DEVICE(0x07c9, 0xb010) }, /* Allied Telesyn AT-USB10 USB Ethernet Adapter */
++      { USB_DEVICE(0x0846, 0x1001) }, /* NetGear EA-101 */
++      { USB_DEVICE(0x0846, 0x1002) }, /* NetGear EA-101 */
++      { USB_DEVICE(0x085a, 0x0008) }, /* PortGear Ethernet Adapter */
++      { USB_DEVICE(0x085a, 0x0009) }, /* PortGear Ethernet Adapter */
++      { USB_DEVICE(0x087d, 0x5704) }, /* Jaton USB Ethernet Device Adapter */
++      { USB_DEVICE(0x0951, 0x0008) }, /* Kingston Technology USB Ethernet Adapter */
++      { USB_DEVICE(0x095a, 0x3003) }, /* Portsmith Express Ethernet Adapter */
++      { USB_DEVICE(0x10bd, 0x1427) }, /* ASANTE USB To Ethernet Adapter */
++      { USB_DEVICE(0x1342, 0x0204) }, /* Mobility USB-Ethernet Adapter */
++      { USB_DEVICE(0x13d2, 0x0400) }, /* Shark Pocket Adapter */
++      { USB_DEVICE(0x1485, 0x0001) }, /* Silicom U2E */
++      { USB_DEVICE(0x1485, 0x0002) }, /* Psion Dacom Gold Port Ethernet */
++      { USB_DEVICE(0x1645, 0x0005) }, /* Entrega E45 */
++      { USB_DEVICE(0x1645, 0x0008) }, /* Entrega USB Ethernet Adapter */
++      { USB_DEVICE(0x1645, 0x8005) }, /* PortGear Ethernet Adapter */
++      { USB_DEVICE(0x1668, 0x0323) }, /* Actiontec USB Ethernet */
++      { USB_DEVICE(0x2001, 0x4000) }, /* D-link DSB-650C */
++      {} /* Null terminator */
++};
++
++MODULE_DEVICE_TABLE (usb, usb_klsi_table);
++
++/****************************************************************
++ *     kaweth_driver
++ ****************************************************************/
++static struct usb_driver kaweth_driver = {
++      .name =         driver_name,
++      .probe =        kaweth_probe,
++      .disconnect =   kaweth_disconnect,
++      .suspend =      kaweth_suspend,
++      .resume =       kaweth_resume,
++      .id_table =     usb_klsi_table,
++      .supports_autosuspend = 1,
++      .disable_hub_initiated_lpm = 1,
++};
++
++typedef __u8 eth_addr_t[6];
++
++/****************************************************************
++ *     usb_eth_dev
++ ****************************************************************/
++struct usb_eth_dev {
++      char *name;
++      __u16 vendor;
++      __u16 device;
++      void *pdata;
++};
++
++/****************************************************************
++ *     kaweth_ethernet_configuration
++ *     Refer Table 8
++ ****************************************************************/
++struct kaweth_ethernet_configuration
++{
++      __u8 size;
++      __u8 reserved1;
++      __u8 reserved2;
++      eth_addr_t hw_addr;
++      __u32 statistics_mask;
++      __le16 segment_size;
++      __u16 max_multicast_filters;
++      __u8 reserved3;
++} __packed;
++
++/****************************************************************
++ *     kaweth_device
++ ****************************************************************/
++struct kaweth_device
++{
++      spinlock_t device_lock;
++
++      __u32 status;
++      int end;
++      int suspend_lowmem_rx;
++      int suspend_lowmem_ctrl;
++      int linkstate;
++      int opened;
++      struct delayed_work lowmem_work;
++
++      struct usb_device *dev;
++      struct usb_interface *intf;
++      struct net_device *net;
++      wait_queue_head_t term_wait;
++
++      struct urb *rx_urb;
++      struct urb *tx_urb;
++      struct urb *irq_urb;
++
++      dma_addr_t intbufferhandle;
++      __u8 *intbuffer;
++      dma_addr_t rxbufferhandle;
++      __u8 *rx_buf;
++
++      
++      struct sk_buff *tx_skb;
++
++      __u8 *firmware_buf;
++      __u8 scratch[KAWETH_SCRATCH_SIZE];
++      __u16 packet_filter_bitmap;
++
++      struct kaweth_ethernet_configuration configuration;
++
++      struct net_device_stats stats;
++};
++
++/****************************************************************
++ *     kaweth_control
++ ****************************************************************/
++static int kaweth_control(struct kaweth_device *kaweth,
++                        unsigned int pipe,
++                        __u8 request,
++                        __u8 requesttype,
++                        __u16 value,
++                        __u16 index,
++                        void *data,
++                        __u16 size,
++                        int timeout)
++{
++      struct usb_ctrlrequest *dr;
++      int retval;
++
++      netdev_dbg(kaweth->net, "kaweth_control()\n");
++
++      if(in_interrupt()) {
++              netdev_dbg(kaweth->net, "in_interrupt()\n");
++              return -EBUSY;
++      }
++
++      dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
++      if (!dr)
++              return -ENOMEM;
++
++      dr->bRequestType = requesttype;
++      dr->bRequest = request;
++      dr->wValue = cpu_to_le16(value);
++      dr->wIndex = cpu_to_le16(index);
++      dr->wLength = cpu_to_le16(size);
++
++      retval = kaweth_internal_control_msg(kaweth->dev,
++                                           pipe,
++                                           dr,
++                                           data,
++                                           size,
++                                           timeout);
++
++      kfree(dr);
++      return retval;
++}
++
++/****************************************************************
++ *     kaweth_read_configuration
++ ****************************************************************/
++static int kaweth_read_configuration(struct kaweth_device *kaweth)
++{
++      int retval;
++
++      netdev_dbg(kaweth->net, "Reading kaweth configuration\n");
++
++      retval = kaweth_control(kaweth,
++                              usb_rcvctrlpipe(kaweth->dev, 0),
++                              KAWETH_COMMAND_GET_ETHERNET_DESC,
++                              USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE,
++                              0,
++                              0,
++                              (void *)&kaweth->configuration,
++                              sizeof(kaweth->configuration),
++                              KAWETH_CONTROL_TIMEOUT);
++
++      return retval;
++}
++
++/****************************************************************
++ *     kaweth_set_urb_size
++ ****************************************************************/
++static int kaweth_set_urb_size(struct kaweth_device *kaweth, __u16 urb_size)
++{
++      int retval;
++
++      netdev_dbg(kaweth->net, "Setting URB size to %d\n", (unsigned)urb_size);
++
++      retval = kaweth_control(kaweth,
++                              usb_sndctrlpipe(kaweth->dev, 0),
++                              KAWETH_COMMAND_SET_URB_SIZE,
++                              USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
++                              urb_size,
++                              0,
++                              (void *)&kaweth->scratch,
++                              0,
++                              KAWETH_CONTROL_TIMEOUT);
++
++      return retval;
++}
++
++/****************************************************************
++ *     kaweth_set_sofs_wait
++ ****************************************************************/
++static int kaweth_set_sofs_wait(struct kaweth_device *kaweth, __u16 sofs_wait)
++{
++      int retval;
++
++      netdev_dbg(kaweth->net, "Set SOFS wait to %d\n", (unsigned)sofs_wait);
++
++      retval = kaweth_control(kaweth,
++                              usb_sndctrlpipe(kaweth->dev, 0),
++                              KAWETH_COMMAND_SET_SOFS_WAIT,
++                              USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
++                              sofs_wait,
++                              0,
++                              (void *)&kaweth->scratch,
++                              0,
++                              KAWETH_CONTROL_TIMEOUT);
++
++      return retval;
++}
++
++/****************************************************************
++ *     kaweth_set_receive_filter
++ ****************************************************************/
++static int kaweth_set_receive_filter(struct kaweth_device *kaweth,
++                                   __u16 receive_filter)
++{
++      int retval;
++
++      netdev_dbg(kaweth->net, "Set receive filter to %d\n",
++                 (unsigned)receive_filter);
++
++      retval = kaweth_control(kaweth,
++                              usb_sndctrlpipe(kaweth->dev, 0),
++                              KAWETH_COMMAND_SET_PACKET_FILTER,
++                              USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
++                              receive_filter,
++                              0,
++                              (void *)&kaweth->scratch,
++                              0,
++                              KAWETH_CONTROL_TIMEOUT);
++
++      return retval;
++}
++
++/****************************************************************
++ *     kaweth_download_firmware
++ ****************************************************************/
++static int kaweth_download_firmware(struct kaweth_device *kaweth,
++                                  const char *fwname,
++                                  __u8 interrupt,
++                                  __u8 type)
++{
++      const struct firmware *fw;
++      int data_len;
++      int ret;
++
++      ret = request_firmware(&fw, fwname, &kaweth->dev->dev);
++      if (ret) {
++              dev_err(&kaweth->intf->dev, "Firmware request failed\n");
++              return ret;
++      }
++
++      if (fw->size > KAWETH_FIRMWARE_BUF_SIZE) {
++              dev_err(&kaweth->intf->dev, "Firmware too big: %zu\n",
++                      fw->size);
++              release_firmware(fw);
++              return -ENOSPC;
++      }
++      data_len = fw->size;
++      memcpy(kaweth->firmware_buf, fw->data, fw->size);
++
++      release_firmware(fw);
++
++      kaweth->firmware_buf[2] = (data_len & 0xFF) - 7;
++      kaweth->firmware_buf[3] = data_len >> 8;
++      kaweth->firmware_buf[4] = type;
++      kaweth->firmware_buf[5] = interrupt;
++
++      netdev_dbg(kaweth->net, "High: %i, Low:%i\n", kaweth->firmware_buf[3],
++                 kaweth->firmware_buf[2]);
++
++      netdev_dbg(kaweth->net,
++                 "Downloading firmware at %p to kaweth device at %p\n",
++                 kaweth->firmware_buf, kaweth);
++      netdev_dbg(kaweth->net, "Firmware length: %d\n", data_len);
++
++      return kaweth_control(kaweth,
++                            usb_sndctrlpipe(kaweth->dev, 0),
++                            KAWETH_COMMAND_SCAN,
++                            USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
++                            0,
++                            0,
++                            (void *)kaweth->firmware_buf,
++                            data_len,
++                            KAWETH_CONTROL_TIMEOUT);
++}
++
++/****************************************************************
++ *     kaweth_trigger_firmware
++ ****************************************************************/
++static int kaweth_trigger_firmware(struct kaweth_device *kaweth,
++                                 __u8 interrupt)
++{
++      kaweth->firmware_buf[0] = 0xB6;
++      kaweth->firmware_buf[1] = 0xC3;
++      kaweth->firmware_buf[2] = 0x01;
++      kaweth->firmware_buf[3] = 0x00;
++      kaweth->firmware_buf[4] = 0x06;
++      kaweth->firmware_buf[5] = interrupt;
++      kaweth->firmware_buf[6] = 0x00;
++      kaweth->firmware_buf[7] = 0x00;
++
++      netdev_dbg(kaweth->net, "Triggering firmware\n");
++
++      return kaweth_control(kaweth,
++                            usb_sndctrlpipe(kaweth->dev, 0),
++                            KAWETH_COMMAND_SCAN,
++                            USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
++                            0,
++                            0,
++                            (void *)kaweth->firmware_buf,
++                            8,
++                            KAWETH_CONTROL_TIMEOUT);
++}
++
++/****************************************************************
++ *     kaweth_reset
++ ****************************************************************/
++static int kaweth_reset(struct kaweth_device *kaweth)
++{
++      int result;
++
++      netdev_dbg(kaweth->net, "kaweth_reset(%p)\n", kaweth);
++      result = usb_reset_configuration(kaweth->dev);
++      mdelay(10);
++
++      netdev_dbg(kaweth->net, "kaweth_reset() returns %d.\n", result);
++
++      return result;
++}
++
++static void kaweth_usb_receive(struct urb *);
++static int kaweth_resubmit_rx_urb(struct kaweth_device *, gfp_t);
++
++/****************************************************************
++      int_callback
++*****************************************************************/
++
++static void kaweth_resubmit_int_urb(struct kaweth_device *kaweth, gfp_t mf)
++{
++      int status;
++
++      status = usb_submit_urb (kaweth->irq_urb, mf);
++      if (unlikely(status == -ENOMEM)) {
++              kaweth->suspend_lowmem_ctrl = 1;
++              schedule_delayed_work(&kaweth->lowmem_work, HZ/4);
++      } else {
++              kaweth->suspend_lowmem_ctrl = 0;
++      }
++
++      if (status)
++              dev_err(&kaweth->intf->dev,
++                      "can't resubmit intr, %s-%s, status %d\n",
++                      kaweth->dev->bus->bus_name,
++                      kaweth->dev->devpath, status);
++}
++
++static void int_callback(struct urb *u)
++{
++      struct kaweth_device *kaweth = u->context;
++      int act_state;
++      int status = u->status;
++
++      switch (status) {
++      case 0:                 /* success */
++              break;
++      case -ECONNRESET:       /* unlink */
++      case -ENOENT:
++      case -ESHUTDOWN:
++              return;
++      /* -EPIPE:  should clear the halt */
++      default:                /* error */
++              goto resubmit;
++      }
++
++      /* we check the link state to report changes */
++      if (kaweth->linkstate != (act_state = ( kaweth->intbuffer[STATE_OFFSET] | STATE_MASK) >> STATE_SHIFT)) {
++              if (act_state)
++                      netif_carrier_on(kaweth->net);
++              else
++                      netif_carrier_off(kaweth->net);
++
++              kaweth->linkstate = act_state;
++      }
++resubmit:
++      kaweth_resubmit_int_urb(kaweth, GFP_ATOMIC);
++}
++
++static void kaweth_resubmit_tl(struct work_struct *work)
++{
++      struct kaweth_device *kaweth =
++              container_of(work, struct kaweth_device, lowmem_work.work);
++
++      if (IS_BLOCKED(kaweth->status))
++              return;
++
++      if (kaweth->suspend_lowmem_rx)
++              kaweth_resubmit_rx_urb(kaweth, GFP_NOIO);
++
++      if (kaweth->suspend_lowmem_ctrl)
++              kaweth_resubmit_int_urb(kaweth, GFP_NOIO);
++}
++
++
++/****************************************************************
++ *     kaweth_resubmit_rx_urb
++ ****************************************************************/
++static int kaweth_resubmit_rx_urb(struct kaweth_device *kaweth,
++                                              gfp_t mem_flags)
++{
++      int result;
++
++      usb_fill_bulk_urb(kaweth->rx_urb,
++                    kaweth->dev,
++                    usb_rcvbulkpipe(kaweth->dev, 1),
++                    kaweth->rx_buf,
++                    KAWETH_BUF_SIZE,
++                    kaweth_usb_receive,
++                    kaweth);
++      kaweth->rx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
++      kaweth->rx_urb->transfer_dma = kaweth->rxbufferhandle;
++
++      if((result = usb_submit_urb(kaweth->rx_urb, mem_flags))) {
++              if (result == -ENOMEM) {
++                      kaweth->suspend_lowmem_rx = 1;
++                      schedule_delayed_work(&kaweth->lowmem_work, HZ/4);
++              }
++              dev_err(&kaweth->intf->dev, "resubmitting rx_urb %d failed\n",
++                      result);
++      } else {
++              kaweth->suspend_lowmem_rx = 0;
++      }
++
++      return result;
++}
++
++static void kaweth_async_set_rx_mode(struct kaweth_device *kaweth);
++
++/****************************************************************
++ *     kaweth_usb_receive
++ ****************************************************************/
++static void kaweth_usb_receive(struct urb *urb)
++{
++      struct device *dev = &urb->dev->dev;
++      struct kaweth_device *kaweth = urb->context;
++      struct net_device *net = kaweth->net;
++      int status = urb->status;
++
++      int count = urb->actual_length;
++      int count2 = urb->transfer_buffer_length;
++
++      __u16 pkt_len = le16_to_cpup((__le16 *)kaweth->rx_buf);
++
++      struct sk_buff *skb;
++
++      if (unlikely(status == -EPIPE)) {
++              kaweth->stats.rx_errors++;
++              kaweth->end = 1;
++              wake_up(&kaweth->term_wait);
++              dev_dbg(dev, "Status was -EPIPE.\n");
++              return;
++      }
++      if (unlikely(status == -ECONNRESET || status == -ESHUTDOWN)) {
++              /* we are killed - set a flag and wake the disconnect handler */
++              kaweth->end = 1;
++              wake_up(&kaweth->term_wait);
++              dev_dbg(dev, "Status was -ECONNRESET or -ESHUTDOWN.\n");
++              return;
++      }
++      if (unlikely(status == -EPROTO || status == -ETIME ||
++                   status == -EILSEQ)) {
++              kaweth->stats.rx_errors++;
++              dev_dbg(dev, "Status was -EPROTO, -ETIME, or -EILSEQ.\n");
++              return;
++      }
++      if (unlikely(status == -EOVERFLOW)) {
++              kaweth->stats.rx_errors++;
++              dev_dbg(dev, "Status was -EOVERFLOW.\n");
++      }
++      spin_lock(&kaweth->device_lock);
++      if (IS_BLOCKED(kaweth->status)) {
++              spin_unlock(&kaweth->device_lock);
++              return;
++      }
++      spin_unlock(&kaweth->device_lock);
++
++      if(status && status != -EREMOTEIO && count != 1) {
++              dev_err(&kaweth->intf->dev,
++                      "%s RX status: %d count: %d packet_len: %d\n",
++                      net->name, status, count, (int)pkt_len);
++              kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
++                return;
++      }
++
++      if(kaweth->net && (count > 2)) {
++              if(pkt_len > (count - 2)) {
++                      dev_err(&kaweth->intf->dev,
++                              "Packet length too long for USB frame (pkt_len: %x, count: %x)\n",
++                              pkt_len, count);
++                      dev_err(&kaweth->intf->dev, "Packet len & 2047: %x\n",
++                              pkt_len & 2047);
++                      dev_err(&kaweth->intf->dev, "Count 2: %x\n", count2);
++                      kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
++                        return;
++                }
++
++              if(!(skb = dev_alloc_skb(pkt_len+2))) {
++                      kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
++                        return;
++              }
++
++              skb_reserve(skb, 2);    /* Align IP on 16 byte boundaries */
++
++              skb_copy_to_linear_data(skb, kaweth->rx_buf + 2, pkt_len);
++
++              skb_put(skb, pkt_len);
++
++              skb->protocol = eth_type_trans(skb, net);
++
++              netif_rx(skb);
++
++              kaweth->stats.rx_packets++;
++              kaweth->stats.rx_bytes += pkt_len;
++      }
++
++      kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
++}
++
++/****************************************************************
++ *     kaweth_open
++ ****************************************************************/
++static int kaweth_open(struct net_device *net)
++{
++      struct kaweth_device *kaweth = netdev_priv(net);
++      int res;
++
++      netdev_dbg(kaweth->net, "Opening network device.\n");
++
++      res = usb_autopm_get_interface(kaweth->intf);
++      if (res) {
++              dev_err(&kaweth->intf->dev, "Interface cannot be resumed.\n");
++              return -EIO;
++      }
++      res = kaweth_resubmit_rx_urb(kaweth, GFP_KERNEL);
++      if (res)
++              goto err_out;
++
++      usb_fill_int_urb(
++              kaweth->irq_urb,
++              kaweth->dev,
++              usb_rcvintpipe(kaweth->dev, 3),
++              kaweth->intbuffer,
++              INTBUFFERSIZE,
++              int_callback,
++              kaweth,
++              250); /* overriding the descriptor */
++      kaweth->irq_urb->transfer_dma = kaweth->intbufferhandle;
++      kaweth->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
++
++      res = usb_submit_urb(kaweth->irq_urb, GFP_KERNEL);
++      if (res) {
++              usb_kill_urb(kaweth->rx_urb);
++              goto err_out;
++      }
++      kaweth->opened = 1;
++
++      netif_start_queue(net);
++
++      kaweth_async_set_rx_mode(kaweth);
++      return 0;
++
++err_out:
++      usb_autopm_put_interface(kaweth->intf);
++      return -EIO;
++}
++
++/****************************************************************
++ *     kaweth_kill_urbs
++ ****************************************************************/
++static void kaweth_kill_urbs(struct kaweth_device *kaweth)
++{
++      usb_kill_urb(kaweth->irq_urb);
++      usb_kill_urb(kaweth->rx_urb);
++      usb_kill_urb(kaweth->tx_urb);
++
++      cancel_delayed_work_sync(&kaweth->lowmem_work);
++
++      /* a scheduled work may have resubmitted,
++         we hit them again */
++      usb_kill_urb(kaweth->irq_urb);
++      usb_kill_urb(kaweth->rx_urb);
++}
++
++/****************************************************************
++ *     kaweth_close
++ ****************************************************************/
++static int kaweth_close(struct net_device *net)
++{
++      struct kaweth_device *kaweth = netdev_priv(net);
++
++      netif_stop_queue(net);
++      kaweth->opened = 0;
++
++      kaweth->status |= KAWETH_STATUS_CLOSING;
++
++      kaweth_kill_urbs(kaweth);
++
++      kaweth->status &= ~KAWETH_STATUS_CLOSING;
++
++      usb_autopm_put_interface(kaweth->intf);
++
++      return 0;
++}
++
++static u32 kaweth_get_link(struct net_device *dev)
++{
++      struct kaweth_device *kaweth = netdev_priv(dev);
++
++      return kaweth->linkstate;
++}
++
++static const struct ethtool_ops ops = {
++      .get_link       = kaweth_get_link
++};
++
++/****************************************************************
++ *     kaweth_usb_transmit_complete
++ ****************************************************************/
++static void kaweth_usb_transmit_complete(struct urb *urb)
++{
++      struct kaweth_device *kaweth = urb->context;
++      struct sk_buff *skb = kaweth->tx_skb;
++      int status = urb->status;
++
++      if (unlikely(status != 0))
++              if (status != -ENOENT)
++                      dev_dbg(&urb->dev->dev, "%s: TX status %d.\n",
++                              kaweth->net->name, status);
++
++      netif_wake_queue(kaweth->net);
++      dev_kfree_skb_irq(skb);
++}
++
++/****************************************************************
++ *     kaweth_start_xmit
++ ****************************************************************/
++static netdev_tx_t kaweth_start_xmit(struct sk_buff *skb,
++                                         struct net_device *net)
++{
++      struct kaweth_device *kaweth = netdev_priv(net);
++      __le16 *private_header;
++
++      int res;
++
++      spin_lock_irq(&kaweth->device_lock);
++
++      kaweth_async_set_rx_mode(kaweth);
++      netif_stop_queue(net);
++      if (IS_BLOCKED(kaweth->status)) {
++              goto skip;
++      }
++
++      /* We now decide whether we can put our special header into the sk_buff */
++      if (skb_cloned(skb) || skb_headroom(skb) < 2) {
++              /* no such luck - we make our own */
++              struct sk_buff *copied_skb;
++              copied_skb = skb_copy_expand(skb, 2, 0, GFP_ATOMIC);
++              dev_kfree_skb_irq(skb);
++              skb = copied_skb;
++              if (!copied_skb) {
++                      kaweth->stats.tx_errors++;
++                      netif_start_queue(net);
++                      spin_unlock_irq(&kaweth->device_lock);
++                      return NETDEV_TX_OK;
++              }
++      }
++
++      private_header = (__le16 *)__skb_push(skb, 2);
++      *private_header = cpu_to_le16(skb->len-2);
++      kaweth->tx_skb = skb;
++
++      usb_fill_bulk_urb(kaweth->tx_urb,
++                    kaweth->dev,
++                    usb_sndbulkpipe(kaweth->dev, 2),
++                    private_header,
++                    skb->len,
++                    kaweth_usb_transmit_complete,
++                    kaweth);
++      kaweth->end = 0;
++
++      if((res = usb_submit_urb(kaweth->tx_urb, GFP_ATOMIC)))
++      {
++              dev_warn(&net->dev, "kaweth failed tx_urb %d\n", res);
++skip:
++              kaweth->stats.tx_errors++;
++
++              netif_start_queue(net);
++              dev_kfree_skb_irq(skb);
++      }
++      else
++      {
++              kaweth->stats.tx_packets++;
++              kaweth->stats.tx_bytes += skb->len;
++      }
++
++      spin_unlock_irq(&kaweth->device_lock);
++
++      return NETDEV_TX_OK;
++}
++
++/****************************************************************
++ *     kaweth_set_rx_mode
++ ****************************************************************/
++static void kaweth_set_rx_mode(struct net_device *net)
++{
++      struct kaweth_device *kaweth = netdev_priv(net);
++
++      __u16 packet_filter_bitmap = KAWETH_PACKET_FILTER_DIRECTED |
++                                     KAWETH_PACKET_FILTER_BROADCAST |
++                                   KAWETH_PACKET_FILTER_MULTICAST;
++
++      netdev_dbg(net, "Setting Rx mode to %d\n", packet_filter_bitmap);
++
++      netif_stop_queue(net);
++
++      if (net->flags & IFF_PROMISC) {
++              packet_filter_bitmap |= KAWETH_PACKET_FILTER_PROMISCUOUS;
++      }
++      else if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI)) {
++              packet_filter_bitmap |= KAWETH_PACKET_FILTER_ALL_MULTICAST;
++      }
++
++      kaweth->packet_filter_bitmap = packet_filter_bitmap;
++      netif_wake_queue(net);
++}
++
++/****************************************************************
++ *     kaweth_async_set_rx_mode
++ ****************************************************************/
++static void kaweth_async_set_rx_mode(struct kaweth_device *kaweth)
++{
++      int result;
++      __u16 packet_filter_bitmap = kaweth->packet_filter_bitmap;
++
++      kaweth->packet_filter_bitmap = 0;
++      if (packet_filter_bitmap == 0)
++              return;
++
++      if (in_interrupt())
++              return;
++
++      result = kaweth_control(kaweth,
++                              usb_sndctrlpipe(kaweth->dev, 0),
++                              KAWETH_COMMAND_SET_PACKET_FILTER,
++                              USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
++                              packet_filter_bitmap,
++                              0,
++                              (void *)&kaweth->scratch,
++                              0,
++                              KAWETH_CONTROL_TIMEOUT);
++
++      if(result < 0) {
++              dev_err(&kaweth->intf->dev, "Failed to set Rx mode: %d\n",
++                      result);
++      }
++      else {
++              netdev_dbg(kaweth->net, "Set Rx mode to %d\n",
++                         packet_filter_bitmap);
++      }
++}
++
++/****************************************************************
++ *     kaweth_netdev_stats
++ ****************************************************************/
++static struct net_device_stats *kaweth_netdev_stats(struct net_device *dev)
++{
++      struct kaweth_device *kaweth = netdev_priv(dev);
++      return &kaweth->stats;
++}
++
++/****************************************************************
++ *     kaweth_tx_timeout
++ ****************************************************************/
++static void kaweth_tx_timeout(struct net_device *net)
++{
++      struct kaweth_device *kaweth = netdev_priv(net);
++
++      dev_warn(&net->dev, "%s: Tx timed out. Resetting.\n", net->name);
++      kaweth->stats.tx_errors++;
++      net->trans_start = jiffies;
++
++      usb_unlink_urb(kaweth->tx_urb);
++}
++
++/****************************************************************
++ *     kaweth_suspend
++ ****************************************************************/
++static int kaweth_suspend(struct usb_interface *intf, pm_message_t message)
++{
++      struct kaweth_device *kaweth = usb_get_intfdata(intf);
++      unsigned long flags;
++
++      dev_dbg(&intf->dev, "Suspending device\n");
++      spin_lock_irqsave(&kaweth->device_lock, flags);
++      kaweth->status |= KAWETH_STATUS_SUSPENDING;
++      spin_unlock_irqrestore(&kaweth->device_lock, flags);
++
++      kaweth_kill_urbs(kaweth);
++      return 0;
++}
++
++/****************************************************************
++ *     kaweth_resume
++ ****************************************************************/
++static int kaweth_resume(struct usb_interface *intf)
++{
++      struct kaweth_device *kaweth = usb_get_intfdata(intf);
++      unsigned long flags;
++
++      dev_dbg(&intf->dev, "Resuming device\n");
++      spin_lock_irqsave(&kaweth->device_lock, flags);
++      kaweth->status &= ~KAWETH_STATUS_SUSPENDING;
++      spin_unlock_irqrestore(&kaweth->device_lock, flags);
++
++      if (!kaweth->opened)
++              return 0;
++      kaweth_resubmit_rx_urb(kaweth, GFP_NOIO);
++      kaweth_resubmit_int_urb(kaweth, GFP_NOIO);
++
++      return 0;
++}
++
++/****************************************************************
++ *     kaweth_probe
++ ****************************************************************/
++
++
++static const struct net_device_ops kaweth_netdev_ops = {
++      .ndo_open =                     kaweth_open,
++      .ndo_stop =                     kaweth_close,
++      .ndo_start_xmit =               kaweth_start_xmit,
++      .ndo_tx_timeout =               kaweth_tx_timeout,
++      .ndo_set_rx_mode =              kaweth_set_rx_mode,
++      .ndo_get_stats =                kaweth_netdev_stats,
++      .ndo_change_mtu =               eth_change_mtu,
++      .ndo_set_mac_address =          eth_mac_addr,
++      .ndo_validate_addr =            eth_validate_addr,
++};
++
++static int kaweth_probe(
++              struct usb_interface *intf,
++              const struct usb_device_id *id      /* from id_table */
++      )
++{
++      struct device *dev = &intf->dev;
++      struct usb_device *udev = interface_to_usbdev(intf);
++      struct kaweth_device *kaweth;
++      struct net_device *netdev;
++      const eth_addr_t bcast_addr = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
++      int result = 0;
++
++      dev_dbg(dev,
++              "Kawasaki Device Probe (Device number:%d): 0x%4.4x:0x%4.4x:0x%4.4x\n",
++              udev->devnum, le16_to_cpu(udev->descriptor.idVendor),
++              le16_to_cpu(udev->descriptor.idProduct),
++              le16_to_cpu(udev->descriptor.bcdDevice));
++
++      dev_dbg(dev, "Device at %p\n", udev);
++
++      dev_dbg(dev, "Descriptor length: %x type: %x\n",
++              (int)udev->descriptor.bLength,
++              (int)udev->descriptor.bDescriptorType);
++
++      netdev = alloc_etherdev(sizeof(*kaweth));
++      if (!netdev)
++              return -ENOMEM;
++
++      kaweth = netdev_priv(netdev);
++      kaweth->dev = udev;
++      kaweth->net = netdev;
++
++      spin_lock_init(&kaweth->device_lock);
++      init_waitqueue_head(&kaweth->term_wait);
++
++      dev_dbg(dev, "Resetting.\n");
++
++      kaweth_reset(kaweth);
++
++      /*
++       * If high byte of bcdDevice is nonzero, firmware is already
++       * downloaded. Don't try to do it again, or we'll hang the device.
++       */
++
++      if (le16_to_cpu(udev->descriptor.bcdDevice) >> 8) {
++              dev_info(dev, "Firmware present in device.\n");
++      } else {
++              /* Download the firmware */
++              dev_info(dev, "Downloading firmware...\n");
++              kaweth->firmware_buf = (__u8 *)__get_free_page(GFP_KERNEL);
++              if ((result = kaweth_download_firmware(kaweth,
++                                                    "kaweth/new_code.bin",
++                                                    100,
++                                                    2)) < 0) {
++                      dev_err(dev, "Error downloading firmware (%d)\n",
++                              result);
++                      goto err_fw;
++              }
++
++              if ((result = kaweth_download_firmware(kaweth,
++                                                    "kaweth/new_code_fix.bin",
++                                                    100,
++                                                    3)) < 0) {
++                      dev_err(dev, "Error downloading firmware fix (%d)\n",
++                              result);
++                      goto err_fw;
++              }
++
++              if ((result = kaweth_download_firmware(kaweth,
++                                                    "kaweth/trigger_code.bin",
++                                                    126,
++                                                    2)) < 0) {
++                      dev_err(dev, "Error downloading trigger code (%d)\n",
++                              result);
++                      goto err_fw;
++
++              }
++
++              if ((result = kaweth_download_firmware(kaweth,
++                                                    "kaweth/trigger_code_fix.bin",
++                                                    126,
++                                                    3)) < 0) {
++                      dev_err(dev, "Error downloading trigger code fix (%d)\n", result);
++                      goto err_fw;
++              }
++
++
++              if ((result = kaweth_trigger_firmware(kaweth, 126)) < 0) {
++                      dev_err(dev, "Error triggering firmware (%d)\n", result);
++                      goto err_fw;
++              }
++
++              /* Device will now disappear for a moment...  */
++              dev_info(dev, "Firmware loaded.  I'll be back...\n");
++err_fw:
++              free_page((unsigned long)kaweth->firmware_buf);
++              free_netdev(netdev);
++              return -EIO;
++      }
++
++      result = kaweth_read_configuration(kaweth);
++
++      if(result < 0) {
++              dev_err(dev, "Error reading configuration (%d), no net device created\n", result);
++              goto err_free_netdev;
++      }
++
++      dev_info(dev, "Statistics collection: %x\n", kaweth->configuration.statistics_mask);
++      dev_info(dev, "Multicast filter limit: %x\n", kaweth->configuration.max_multicast_filters & ((1 << 15) - 1));
++      dev_info(dev, "MTU: %d\n", le16_to_cpu(kaweth->configuration.segment_size));
++      dev_info(dev, "Read MAC address %pM\n", kaweth->configuration.hw_addr);
++
++      if(!memcmp(&kaweth->configuration.hw_addr,
++                   &bcast_addr,
++                 sizeof(bcast_addr))) {
++              dev_err(dev, "Firmware not functioning properly, no net device created\n");
++              goto err_free_netdev;
++      }
++
++      if(kaweth_set_urb_size(kaweth, KAWETH_BUF_SIZE) < 0) {
++              dev_dbg(dev, "Error setting URB size\n");
++              goto err_free_netdev;
++      }
++
++      if(kaweth_set_sofs_wait(kaweth, KAWETH_SOFS_TO_WAIT) < 0) {
++              dev_err(dev, "Error setting SOFS wait\n");
++              goto err_free_netdev;
++      }
++
++      result = kaweth_set_receive_filter(kaweth,
++                                           KAWETH_PACKET_FILTER_DIRECTED |
++                                           KAWETH_PACKET_FILTER_BROADCAST |
++                                           KAWETH_PACKET_FILTER_MULTICAST);
++
++      if(result < 0) {
++              dev_err(dev, "Error setting receive filter\n");
++              goto err_free_netdev;
++      }
++
++      dev_dbg(dev, "Initializing net device.\n");
++
++      kaweth->intf = intf;
++
++      kaweth->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
++      if (!kaweth->tx_urb)
++              goto err_free_netdev;
++      kaweth->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
++      if (!kaweth->rx_urb)
++              goto err_only_tx;
++      kaweth->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
++      if (!kaweth->irq_urb)
++              goto err_tx_and_rx;
++
++      kaweth->intbuffer = usb_alloc_coherent( kaweth->dev,
++                                              INTBUFFERSIZE,
++                                              GFP_KERNEL,
++                                              &kaweth->intbufferhandle);
++      if (!kaweth->intbuffer)
++              goto err_tx_and_rx_and_irq;
++      kaweth->rx_buf = usb_alloc_coherent(    kaweth->dev,
++                                              KAWETH_BUF_SIZE,
++                                              GFP_KERNEL,
++                                              &kaweth->rxbufferhandle);
++      if (!kaweth->rx_buf)
++              goto err_all_but_rxbuf;
++
++      memcpy(netdev->broadcast, &bcast_addr, sizeof(bcast_addr));
++      memcpy(netdev->dev_addr, &kaweth->configuration.hw_addr,
++               sizeof(kaweth->configuration.hw_addr));
++
++      netdev->netdev_ops = &kaweth_netdev_ops;
++      netdev->watchdog_timeo = KAWETH_TX_TIMEOUT;
++      netdev->mtu = le16_to_cpu(kaweth->configuration.segment_size);
++      netdev->ethtool_ops = &ops;
++
++      /* kaweth is zeroed as part of alloc_netdev */
++      INIT_DELAYED_WORK(&kaweth->lowmem_work, kaweth_resubmit_tl);
++      usb_set_intfdata(intf, kaweth);
++
++#if 0
++// dma_supported() is deeply broken on almost all architectures
++      if (dma_supported (dev, 0xffffffffffffffffULL))
++              kaweth->net->features |= NETIF_F_HIGHDMA;
++#endif
++
++      SET_NETDEV_DEV(netdev, dev);
++      if (register_netdev(netdev) != 0) {
++              dev_err(dev, "Error registering netdev.\n");
++              goto err_intfdata;
++      }
++
++      dev_info(dev, "kaweth interface created at %s\n",
++               kaweth->net->name);
++
++      dev_dbg(dev, "Kaweth probe returning.\n");
++
++      return 0;
++
++err_intfdata:
++      usb_set_intfdata(intf, NULL);
++      usb_free_coherent(kaweth->dev, KAWETH_BUF_SIZE, (void *)kaweth->rx_buf, kaweth->rxbufferhandle);
++err_all_but_rxbuf:
++      usb_free_coherent(kaweth->dev, INTBUFFERSIZE, (void *)kaweth->intbuffer, kaweth->intbufferhandle);
++err_tx_and_rx_and_irq:
++      usb_free_urb(kaweth->irq_urb);
++err_tx_and_rx:
++      usb_free_urb(kaweth->rx_urb);
++err_only_tx:
++      usb_free_urb(kaweth->tx_urb);
++err_free_netdev:
++      free_netdev(netdev);
++
++      return -EIO;
++}
++
++/****************************************************************
++ *     kaweth_disconnect
++ ****************************************************************/
++static void kaweth_disconnect(struct usb_interface *intf)
++{
++      struct kaweth_device *kaweth = usb_get_intfdata(intf);
++      struct net_device *netdev;
++
++      dev_info(&intf->dev, "Unregistering\n");
++
++      usb_set_intfdata(intf, NULL);
++      if (!kaweth) {
++              dev_warn(&intf->dev, "unregistering non-existent device\n");
++              return;
++      }
++      netdev = kaweth->net;
++
++      netdev_dbg(kaweth->net, "Unregistering net device\n");
++      unregister_netdev(netdev);
++
++      usb_free_urb(kaweth->rx_urb);
++      usb_free_urb(kaweth->tx_urb);
++      usb_free_urb(kaweth->irq_urb);
++
++      usb_free_coherent(kaweth->dev, KAWETH_BUF_SIZE, (void *)kaweth->rx_buf, kaweth->rxbufferhandle);
++      usb_free_coherent(kaweth->dev, INTBUFFERSIZE, (void *)kaweth->intbuffer, kaweth->intbufferhandle);
++
++      free_netdev(netdev);
++}
++
++
++// FIXME this completion stuff is a modified clone of
++// an OLD version of some stuff in usb.c ...
++struct usb_api_data {
++      wait_queue_head_t wqh;
++      int done;
++};
++
++/*-------------------------------------------------------------------*
++ * completion handler for compatibility wrappers (sync control/bulk) *
++ *-------------------------------------------------------------------*/
++static void usb_api_blocking_completion(struct urb *urb)
++{
++        struct usb_api_data *awd = (struct usb_api_data *)urb->context;
++
++      awd->done=1;
++      wake_up(&awd->wqh);
++}
++
++/*-------------------------------------------------------------------*
++ *                         COMPATIBILITY STUFF                       *
++ *-------------------------------------------------------------------*/
++
++// Starts urb and waits for completion or timeout
++static int usb_start_wait_urb(struct urb *urb, int timeout, int* actual_length)
++{
++      struct usb_api_data awd;
++        int status;
++
++        init_waitqueue_head(&awd.wqh);
++        awd.done = 0;
++
++        urb->context = &awd;
++        status = usb_submit_urb(urb, GFP_NOIO);
++        if (status) {
++                // something went wrong
++                usb_free_urb(urb);
++                return status;
++        }
++
++      if (!wait_event_timeout(awd.wqh, awd.done, timeout)) {
++                // timeout
++                dev_warn(&urb->dev->dev, "usb_control/bulk_msg: timeout\n");
++                usb_kill_urb(urb);  // remove urb safely
++                status = -ETIMEDOUT;
++        }
++      else {
++                status = urb->status;
++      }
++
++        if (actual_length) {
++                *actual_length = urb->actual_length;
++      }
++
++        usb_free_urb(urb);
++        return status;
++}
++
++/*-------------------------------------------------------------------*/
++// returns status (negative) or length (positive)
++static int kaweth_internal_control_msg(struct usb_device *usb_dev,
++                                     unsigned int pipe,
++                                     struct usb_ctrlrequest *cmd, void *data,
++                                     int len, int timeout)
++{
++        struct urb *urb;
++        int retv;
++        int length = 0; /* shut up GCC */
++
++      urb = usb_alloc_urb(0, GFP_ATOMIC);
++        if (!urb)
++                return -ENOMEM;
++
++        usb_fill_control_urb(urb, usb_dev, pipe, (unsigned char*)cmd, data,
++                       len, usb_api_blocking_completion, NULL);
++
++        retv = usb_start_wait_urb(urb, timeout, &length);
++        if (retv < 0) {
++                return retv;
++      }
++        else {
++                return length;
++      }
++}
++
++module_usb_driver(kaweth_driver);
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/Kconfig backports-3.18.1-1/drivers/net/usb/Kconfig
+--- backports-3.18.1-1.org/drivers/net/usb/Kconfig     2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/Kconfig 2015-01-03 15:19:02.310281530 +0100
+@@ -13,7 +13,6 @@
+ if USB_NET_DRIVERS
+ 
+ config USB_CATC
+-      depends on n
+       tristate "USB CATC NetMate-based Ethernet device support"
+       depends on m
+       depends on CRC32
+@@ -34,7 +33,6 @@
+         module will be called catc.
+ 
+ config USB_KAWETH
+-      depends on n
+       tristate "USB KLSI KL5USB101-based ethernet device support"
+       depends on m
+       ---help---
+@@ -75,7 +73,6 @@
+         module will be called kaweth.
+ 
+ config USB_PEGASUS
+-      depends on n
+       tristate "USB Pegasus/Pegasus-II based ethernet device support"
+       depends on m
+       select BACKPORT_MII
+@@ -92,7 +89,6 @@
+         module will be called pegasus.
+ 
+ config USB_RTL8150
+-      depends on n
+       tristate "USB RTL8150 based ethernet device support"
+       depends on m
+       select BACKPORT_MII
+@@ -105,7 +101,6 @@
+         module will be called rtl8150.
+ 
+ config USB_RTL8152
+-      depends on n
+       tristate "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
+       depends on m
+       select BACKPORT_MII
+@@ -153,7 +148,6 @@
+         module will be called usbnet.
+ 
+ config USB_NET_AX8817X
+-      depends on n
+       tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
+       depends on m
+       depends on USB_USBNET
+@@ -183,7 +177,6 @@
+         what other networking devices you have in use.
+ 
+ config USB_NET_AX88179_178A
+-      depends on n
+       tristate "ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet"
+       depends on m
+       depends on USB_USBNET
+@@ -232,7 +225,6 @@
+         name is used instead.
+ 
+ config USB_NET_CDC_EEM
+-      depends on n
+       tristate "CDC EEM support"
+       depends on m
+       depends on USB_USBNET
+@@ -268,7 +260,6 @@
+           * Ericsson F5521gw Mobile Broadband Module
+ 
+ config USB_NET_HUAWEI_CDC_NCM
+-      depends on n
+       tristate "Huawei NCM embedded AT channel support"
+       depends on m
+       depends on USB_USBNET
+@@ -304,7 +295,6 @@
+         module will be called cdc_mbim.
+ 
+ config USB_NET_DM9601
+-      depends on n
+       tristate "Davicom DM96xx based USB 10/100 ethernet devices"
+       depends on m
+       depends on USB_USBNET
+@@ -314,7 +304,6 @@
+         based USB 10/100 Ethernet adapters.
+ 
+ config USB_NET_SR9700
+-      depends on n
+       tristate "CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices"
+       depends on m
+       depends on USB_USBNET
+@@ -324,7 +313,6 @@
+         10/100 Ethernet adapters.
+ 
+ config USB_NET_SR9800
+-      depends on n
+       tristate "CoreChip-sz SR9800 based USB 2.0 10/100 ethernet devices"
+       depends on m
+       depends on USB_USBNET
+@@ -341,7 +329,6 @@
+         module will be called sr9800.
+ 
+ config USB_NET_SMSC75XX
+-      depends on n
+       tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices"
+       depends on m
+       depends on USB_USBNET
+@@ -353,7 +340,6 @@
+         Gigabit Ethernet adapters.
+ 
+ config USB_NET_SMSC95XX
+-      depends on n
+       tristate "SMSC LAN95XX based USB 2.0 10/100 ethernet devices"
+       depends on m
+       depends on USB_USBNET
+@@ -365,7 +351,6 @@
+         10/100 Ethernet adapters.
+ 
+ config USB_NET_GL620A
+-      depends on n
+       tristate "GeneSys GL620USB-A based cables"
+       depends on m
+       depends on USB_USBNET
+@@ -376,7 +361,6 @@
+         Note that the half-duplex "GL620USB" is not supported.
+ 
+ config USB_NET_NET1080
+-      depends on n
+       tristate "NetChip 1080 based cables (Laplink, ...)"
+       depends on m
+       default y
+@@ -387,7 +371,6 @@
+         optionally with LEDs that indicate traffic
+ 
+ config USB_NET_PLUSB
+-      depends on n
+       tristate "Prolific PL-2301/2302/25A1 based cables"
+       depends on m
+       # if the handshake/init/reset problems, from original 'plusb',
+@@ -398,7 +381,6 @@
+         with one of these chips.
+ 
+ config USB_NET_MCS7830
+-      depends on n
+       tristate "MosChip MCS7830 based Ethernet adapters"
+       depends on m
+       depends on USB_USBNET
+@@ -424,7 +406,6 @@
+         (and for) Microsoft; it isn't an "Open" ecosystem or market.
+ 
+ config USB_NET_CDC_SUBSET
+-      depends on n
+       tristate "Simple USB Network Links (CDC Ethernet subset)"
+       depends on m
+       depends on USB_USBNET
+@@ -496,7 +477,6 @@
+         with one of these chips.
+ 
+ config USB_NET_ZAURUS
+-      depends on n
+       tristate "Sharp Zaurus (stock ROMs) and compatible"
+       depends on m
+       depends on USB_USBNET
+@@ -516,7 +496,6 @@
+         some cases CDC MDLM) protocol, not "g_ether".
+ 
+ config USB_NET_CX82310_ETH
+-      depends on n
+       tristate "Conexant CX82310 USB ethernet port"
+       depends on m
+       depends on USB_USBNET
+@@ -526,7 +505,6 @@
+         it will not work with ADSL modems (use cxacru driver instead).
+ 
+ config USB_NET_KALMIA
+-      depends on n
+       tristate "Samsung Kalmia based LTE USB modem"
+       depends on m
+       depends on USB_USBNET
+@@ -561,7 +539,6 @@
+         module will be called qmi_wwan.
+ 
+ config USB_HSO
+-      depends on n
+       tristate "Option USB High Speed Mobile Devices"
+       depends on m
+       depends on USB && RFKILL && TTY
+@@ -574,7 +551,6 @@
+         module will be called hso.
+ 
+ config USB_NET_INT51X1
+-      depends on n
+       tristate "Intellon PLC based usb adapter"
+       depends on m
+       depends on USB_USBNET
+@@ -584,7 +560,6 @@
+         INT51x1/INT5200 chip, like the "devolo dLan duo".
+ 
+ config USB_CDC_PHONET
+-      depends on n
+       tristate "CDC Phonet support"
+       depends on m
+       depends on PHONET
+@@ -594,7 +569,6 @@
+         "PC suite" USB profile.
+ 
+ config USB_IPHETH
+-      depends on n
+       tristate "Apple iPhone USB Ethernet driver"
+       depends on m
+       default n
+@@ -618,11 +592,10 @@
+         module will be called sierra_net.
+ 
+ config USB_VL600
+-      depends on n
+       tristate "LG VL600 modem dongle"
+       depends on m
+       depends on USB_NET_CDCETHER && TTY
+-      select USB_ACM
++#     depends on USB_ACM
+       help
+         Select this if you want to use an LG Electronics 4G/LTE usb modem
+         called VL600.  This driver only handles the ethernet
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/lg-vl600.c backports-3.18.1-1/drivers/net/usb/lg-vl600.c
+--- backports-3.18.1-1.org/drivers/net/usb/lg-vl600.c  1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/lg-vl600.c      2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,353 @@
++/*
++ * Ethernet interface part of the LG VL600 LTE modem (4G dongle)
++ *
++ * Copyright (C) 2011 Intel Corporation
++ * Author: Andrzej Zaborowski <balrogg@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ */
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/usb/cdc.h>
++#include <linux/usb/usbnet.h>
++#include <linux/if_ether.h>
++#include <linux/if_arp.h>
++#include <linux/inetdevice.h>
++#include <linux/module.h>
++
++/*
++ * The device has a CDC ACM port for modem control (it claims to be
++ * CDC ACM anyway) and a CDC Ethernet port for actual network data.
++ * It will however ignore data on both ports that is not encapsulated
++ * in a specific way, any data returned is also encapsulated the same
++ * way.  The headers don't seem to follow any popular standard.
++ *
++ * This driver adds and strips these headers from the ethernet frames
++ * sent/received from the CDC Ethernet port.  The proprietary header
++ * replaces the standard ethernet header in a packet so only actual
++ * ethernet frames are allowed.  The headers allow some form of
++ * multiplexing by using non standard values of the .h_proto field.
++ * Windows/Mac drivers do send a couple of such frames to the device
++ * during initialisation, with protocol set to 0x0906 or 0x0b06 and (what
++ * seems to be) a flag in the .dummy_flags.  This doesn't seem necessary
++ * for modem operation but can possibly be used for GPS or other funcitons.
++ */
++
++struct vl600_frame_hdr {
++      __le32 len;
++      __le32 serial;
++      __le32 pkt_cnt;
++      __le32 dummy_flags;
++      __le32 dummy;
++      __le32 magic;
++} __attribute__((packed));
++
++struct vl600_pkt_hdr {
++      __le32 dummy[2];
++      __le32 len;
++      __be16 h_proto;
++} __attribute__((packed));
++
++struct vl600_state {
++      struct sk_buff *current_rx_buf;
++};
++
++static int vl600_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      int ret;
++      struct vl600_state *s = kzalloc(sizeof(struct vl600_state), GFP_KERNEL);
++
++      if (!s)
++              return -ENOMEM;
++
++      ret = usbnet_cdc_bind(dev, intf);
++      if (ret) {
++              kfree(s);
++              return ret;
++      }
++
++      dev->driver_priv = s;
++
++      /* ARP packets don't go through, but they're also of no use.  The
++       * subnet has only two hosts anyway: us and the gateway / DHCP
++       * server (probably simulated by modem firmware or network operator)
++       * whose address changes everytime we connect to the intarwebz and
++       * who doesn't bother answering ARP requests either.  So hardware
++       * addresses have no meaning, the destination and the source of every
++       * packet depend only on whether it is on the IN or OUT endpoint.  */
++      dev->net->flags |= IFF_NOARP;
++      /* IPv6 NDP relies on multicast.  Enable it by default. */
++      dev->net->flags |= IFF_MULTICAST;
++
++      return ret;
++}
++
++static void vl600_unbind(struct usbnet *dev, struct usb_interface *intf)
++{
++      struct vl600_state *s = dev->driver_priv;
++
++      if (s->current_rx_buf)
++              dev_kfree_skb(s->current_rx_buf);
++
++      kfree(s);
++
++      return usbnet_cdc_unbind(dev, intf);
++}
++
++static int vl600_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
++{
++      struct vl600_frame_hdr *frame;
++      struct vl600_pkt_hdr *packet;
++      struct ethhdr *ethhdr;
++      int packet_len, count;
++      struct sk_buff *buf = skb;
++      struct sk_buff *clone;
++      struct vl600_state *s = dev->driver_priv;
++
++      /* Frame lengths are generally 4B multiplies but every couple of
++       * hours there's an odd number of bytes sized yet correct frame,
++       * so don't require this.  */
++
++      /* Allow a packet (or multiple packets batched together) to be
++       * split across many frames.  We don't allow a new batch to
++       * begin in the same frame another one is ending however, and no
++       * leading or trailing pad bytes.  */
++      if (s->current_rx_buf) {
++              frame = (struct vl600_frame_hdr *) s->current_rx_buf->data;
++              if (skb->len + s->current_rx_buf->len >
++                              le32_to_cpup(&frame->len)) {
++                      netif_err(dev, ifup, dev->net, "Fragment too long\n");
++                      dev->net->stats.rx_length_errors++;
++                      goto error;
++              }
++
++              buf = s->current_rx_buf;
++              memcpy(skb_put(buf, skb->len), skb->data, skb->len);
++      } else if (skb->len < 4) {
++              netif_err(dev, ifup, dev->net, "Frame too short\n");
++              dev->net->stats.rx_length_errors++;
++              goto error;
++      }
++
++      frame = (struct vl600_frame_hdr *) buf->data;
++      /* Yes, check that frame->magic == 0x53544448 (or 0x44544d48),
++       * otherwise we may run out of memory w/a bad packet */
++      if (ntohl(frame->magic) != 0x53544448 &&
++                      ntohl(frame->magic) != 0x44544d48)
++              goto error;
++
++      if (buf->len < sizeof(*frame) ||
++                      buf->len != le32_to_cpup(&frame->len)) {
++              /* Save this fragment for later assembly */
++              if (s->current_rx_buf)
++                      return 0;
++
++              s->current_rx_buf = skb_copy_expand(skb, 0,
++                              le32_to_cpup(&frame->len), GFP_ATOMIC);
++              if (!s->current_rx_buf) {
++                      netif_err(dev, ifup, dev->net, "Reserving %i bytes "
++                                      "for packet assembly failed.\n",
++                                      le32_to_cpup(&frame->len));
++                      dev->net->stats.rx_errors++;
++              }
++
++              return 0;
++      }
++
++      count = le32_to_cpup(&frame->pkt_cnt);
++
++      skb_pull(buf, sizeof(*frame));
++
++      while (count--) {
++              if (buf->len < sizeof(*packet)) {
++                      netif_err(dev, ifup, dev->net, "Packet too short\n");
++                      goto error;
++              }
++
++              packet = (struct vl600_pkt_hdr *) buf->data;
++              packet_len = sizeof(*packet) + le32_to_cpup(&packet->len);
++              if (packet_len > buf->len) {
++                      netif_err(dev, ifup, dev->net,
++                                      "Bad packet length stored in header\n");
++                      goto error;
++              }
++
++              /* Packet header is same size as the ethernet header
++               * (sizeof(*packet) == sizeof(*ethhdr)), additionally
++               * the h_proto field is in the same place so we just leave it
++               * alone and fill in the remaining fields.
++               */
++              ethhdr = (struct ethhdr *) skb->data;
++              if (be16_to_cpup(&ethhdr->h_proto) == ETH_P_ARP &&
++                              buf->len > 0x26) {
++                      /* Copy the addresses from packet contents */
++                      memcpy(ethhdr->h_source,
++                                      &buf->data[sizeof(*ethhdr) + 0x8],
++                                      ETH_ALEN);
++                      memcpy(ethhdr->h_dest,
++                                      &buf->data[sizeof(*ethhdr) + 0x12],
++                                      ETH_ALEN);
++              } else {
++                      memset(ethhdr->h_source, 0, ETH_ALEN);
++                      memcpy(ethhdr->h_dest, dev->net->dev_addr, ETH_ALEN);
++
++                      /* Inbound IPv6 packets have an IPv4 ethertype (0x800)
++                       * for some reason.  Peek at the L3 header to check
++                       * for IPv6 packets, and set the ethertype to IPv6
++                       * (0x86dd) so Linux can understand it.
++                       */
++                      if ((buf->data[sizeof(*ethhdr)] & 0xf0) == 0x60)
++                              ethhdr->h_proto = htons(ETH_P_IPV6);
++              }
++
++              if (count) {
++                      /* Not the last packet in this batch */
++                      clone = skb_clone(buf, GFP_ATOMIC);
++                      if (!clone)
++                              goto error;
++
++                      skb_trim(clone, packet_len);
++                      usbnet_skb_return(dev, clone);
++
++                      skb_pull(buf, (packet_len + 3) & ~3);
++              } else {
++                      skb_trim(buf, packet_len);
++
++                      if (s->current_rx_buf) {
++                              usbnet_skb_return(dev, buf);
++                              s->current_rx_buf = NULL;
++                              return 0;
++                      }
++
++                      return 1;
++              }
++      }
++
++error:
++      if (s->current_rx_buf) {
++              dev_kfree_skb_any(s->current_rx_buf);
++              s->current_rx_buf = NULL;
++      }
++      dev->net->stats.rx_errors++;
++      return 0;
++}
++
++static struct sk_buff *vl600_tx_fixup(struct usbnet *dev,
++              struct sk_buff *skb, gfp_t flags)
++{
++      struct sk_buff *ret;
++      struct vl600_frame_hdr *frame;
++      struct vl600_pkt_hdr *packet;
++      static uint32_t serial = 1;
++      int orig_len = skb->len - sizeof(struct ethhdr);
++      int full_len = (skb->len + sizeof(struct vl600_frame_hdr) + 3) & ~3;
++
++      frame = (struct vl600_frame_hdr *) skb->data;
++      if (skb->len > sizeof(*frame) && skb->len == le32_to_cpup(&frame->len))
++              return skb; /* Already encapsulated? */
++
++      if (skb->len < sizeof(struct ethhdr))
++              /* Drop, device can only deal with ethernet packets */
++              return NULL;
++
++      if (!skb_cloned(skb)) {
++              int headroom = skb_headroom(skb);
++              int tailroom = skb_tailroom(skb);
++
++              if (tailroom >= full_len - skb->len - sizeof(*frame) &&
++                              headroom >= sizeof(*frame))
++                      /* There's enough head and tail room */
++                      goto encapsulate;
++
++              if (headroom + tailroom + skb->len >= full_len) {
++                      /* There's enough total room, just readjust */
++                      skb->data = memmove(skb->head + sizeof(*frame),
++                                      skb->data, skb->len);
++                      skb_set_tail_pointer(skb, skb->len);
++                      goto encapsulate;
++              }
++      }
++
++      /* Alloc a new skb with the required size */
++      ret = skb_copy_expand(skb, sizeof(struct vl600_frame_hdr), full_len -
++                      skb->len - sizeof(struct vl600_frame_hdr), flags);
++      dev_kfree_skb_any(skb);
++      if (!ret)
++              return ret;
++      skb = ret;
++
++encapsulate:
++      /* Packet header is same size as ethernet packet header
++       * (sizeof(*packet) == sizeof(struct ethhdr)), additionally the
++       * h_proto field is in the same place so we just leave it alone and
++       * overwrite the remaining fields.
++       */
++      packet = (struct vl600_pkt_hdr *) skb->data;
++      /* The VL600 wants IPv6 packets to have an IPv4 ethertype
++       * Since this modem only supports IPv4 and IPv6, just set all
++       * frames to 0x0800 (ETH_P_IP)
++       */
++      packet->h_proto = htons(ETH_P_IP);
++      memset(&packet->dummy, 0, sizeof(packet->dummy));
++      packet->len = cpu_to_le32(orig_len);
++
++      frame = (struct vl600_frame_hdr *) skb_push(skb, sizeof(*frame));
++      memset(frame, 0, sizeof(*frame));
++      frame->len = cpu_to_le32(full_len);
++      frame->serial = cpu_to_le32(serial++);
++      frame->pkt_cnt = cpu_to_le32(1);
++
++      if (skb->len < full_len) /* Pad */
++              skb_put(skb, full_len - skb->len);
++
++      return skb;
++}
++
++static const struct driver_info       vl600_info = {
++      .description    = "LG VL600 modem",
++      .flags          = FLAG_RX_ASSEMBLE | FLAG_WWAN,
++      .bind           = vl600_bind,
++      .unbind         = vl600_unbind,
++      .status         = usbnet_cdc_status,
++      .rx_fixup       = vl600_rx_fixup,
++      .tx_fixup       = vl600_tx_fixup,
++};
++
++static const struct usb_device_id products[] = {
++      {
++              USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
++                              USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
++              .driver_info    = (unsigned long) &vl600_info,
++      },
++      {},     /* End */
++};
++MODULE_DEVICE_TABLE(usb, products);
++
++static struct usb_driver lg_vl600_driver = {
++      .name           = "lg-vl600",
++      .id_table       = products,
++      .probe          = usbnet_probe,
++      .disconnect     = usbnet_disconnect,
++      .suspend        = usbnet_suspend,
++      .resume         = usbnet_resume,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(lg_vl600_driver);
++
++MODULE_AUTHOR("Anrzej Zaborowski");
++MODULE_DESCRIPTION("LG-VL600 modem's ethernet link");
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/Makefile backports-3.18.1-1/drivers/net/usb/Makefile
+--- backports-3.18.1-1.org/drivers/net/usb/Makefile    2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/Makefile        2015-01-03 13:49:51.269970813 +0100
+@@ -1,39 +1,35 @@
+-#
+-# Makefile for USB Network drivers
+-#
+-#
+-#obj-$(CPTCFG_USB_CATC)               += catc.o
+-#obj-$(CPTCFG_USB_KAWETH)     += kaweth.o
+-#obj-$(CPTCFG_USB_PEGASUS)    += pegasus.o
+-#obj-$(CPTCFG_USB_RTL8150)    += rtl8150.o
+-#obj-$(CPTCFG_USB_RTL8152)    += r8152.o
+-#obj-$(CPTCFG_USB_HSO)                += hso.o
+-#obj-$(CPTCFG_USB_NET_AX8817X)        += asix.o
+-#obj-$(CPTCFG_USB_NET_AX88179_178A)      += ax88179_178a.o
++obj-$(CPTCFG_USB_CATC)                += catc.o
++obj-$(CPTCFG_USB_KAWETH)      += kaweth.o
++obj-$(CPTCFG_USB_PEGASUS)     += pegasus.o
++obj-$(CPTCFG_USB_RTL8150)     += rtl8150.o
++obj-$(CPTCFG_USB_RTL8152)     += r8152.o
++obj-$(CPTCFG_USB_HSO)         += hso.o
++obj-$(CPTCFG_USB_NET_AX8817X) += asix.o
++asix-y := asix_devices.o asix_common.o ax88172a.o
++obj-$(CPTCFG_USB_NET_AX88179_178A)      += ax88179_178a.o
+ obj-$(CPTCFG_USB_NET_CDCETHER)        += cdc_ether.o
+-#obj-$(CPTCFG_USB_NET_CDC_EEM)        += cdc_eem.o
+-#obj-$(CPTCFG_USB_NET_DM9601) += dm9601.o
+-#obj-$(CPTCFG_USB_NET_SR9700) += sr9700.o
+-#obj-$(CPTCFG_USB_NET_SR9800) += sr9800.o
+-#obj-$(CPTCFG_USB_NET_SMSC75XX)       += smsc75xx.o
+-#obj-$(CPTCFG_USB_NET_SMSC95XX)       += smsc95xx.o
+-#obj-$(CPTCFG_USB_NET_GL620A) += gl620a.o
+-#obj-$(CPTCFG_USB_NET_NET1080)        += net1080.o
+-#obj-$(CPTCFG_USB_NET_PLUSB)  += plusb.o
++obj-$(CPTCFG_USB_NET_CDC_EEM) += cdc_eem.o
++obj-$(CPTCFG_USB_NET_DM9601)  += dm9601.o
++obj-$(CPTCFG_USB_NET_SR9700)  += sr9700.o
++obj-$(CPTCFG_USB_NET_SR9800)  += sr9800.o
++obj-$(CPTCFG_USB_NET_SMSC75XX)        += smsc75xx.o
++obj-$(CPTCFG_USB_NET_SMSC95XX)        += smsc95xx.o
++obj-$(CPTCFG_USB_NET_GL620A)  += gl620a.o
++obj-$(CPTCFG_USB_NET_NET1080) += net1080.o
++obj-$(CPTCFG_USB_NET_PLUSB)   += plusb.o
+ obj-$(CPTCFG_USB_NET_RNDIS_HOST)      += rndis_host.o
+-#obj-$(CPTCFG_USB_NET_CDC_SUBSET)     += cdc_subset.o
+-#obj-$(CPTCFG_USB_NET_ZAURUS) += zaurus.o
+-#obj-$(CPTCFG_USB_NET_MCS7830)        += mcs7830.o
++obj-$(CPTCFG_USB_NET_CDC_SUBSET)      += cdc_subset.o
++obj-$(CPTCFG_USB_NET_ZAURUS)  += zaurus.o
++obj-$(CPTCFG_USB_NET_MCS7830) += mcs7830.o
+ obj-$(CPTCFG_USB_USBNET)      += usbnet.o
+-#obj-$(CPTCFG_USB_NET_INT51X1)        += int51x1.o
+-#obj-$(CPTCFG_USB_CDC_PHONET) += cdc-phonet.o
+-#obj-$(CPTCFG_USB_NET_KALMIA) += kalmia.o
+-#obj-$(CPTCFG_USB_IPHETH)     += ipheth.o
++obj-$(CPTCFG_USB_NET_INT51X1) += int51x1.o
++obj-$(CPTCFG_USB_CDC_PHONET)  += cdc-phonet.o
++obj-$(CPTCFG_USB_NET_KALMIA)  += kalmia.o
++obj-$(CPTCFG_USB_IPHETH)      += ipheth.o
+ obj-$(CPTCFG_USB_SIERRA_NET)  += sierra_net.o
+-#obj-$(CPTCFG_USB_NET_CX82310_ETH)    += cx82310_eth.o
++obj-$(CPTCFG_USB_NET_CX82310_ETH)     += cx82310_eth.o
+ obj-$(CPTCFG_USB_NET_CDC_NCM) += cdc_ncm.o
+-#obj-$(CPTCFG_USB_NET_HUAWEI_CDC_NCM) += huawei_cdc_ncm.o
+-#obj-$(CPTCFG_USB_VL600)              += lg-vl600.o
++obj-$(CPTCFG_USB_NET_HUAWEI_CDC_NCM)  += huawei_cdc_ncm.o
++obj-$(CPTCFG_USB_VL600)               += lg-vl600.o
+ obj-$(CPTCFG_USB_NET_QMI_WWAN)        += qmi_wwan.o
+ obj-$(CPTCFG_USB_NET_CDC_MBIM)        += cdc_mbim.o
+-
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/mcs7830.c backports-3.18.1-1/drivers/net/usb/mcs7830.c
+--- backports-3.18.1-1.org/drivers/net/usb/mcs7830.c   1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/mcs7830.c       2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,643 @@
++/*
++ * MOSCHIP MCS7830 based (7730/7830/7832) USB 2.0 Ethernet Devices
++ *
++ * based on usbnet.c, asix.c and the vendor provided mcs7830 driver
++ *
++ * Copyright (C) 2010 Andreas Mohr <andi@lisas.de>
++ * Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>
++ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
++ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
++ * Copyright (c) 2002-2003 TiVo Inc.
++ *
++ * Definitions gathered from MOSCHIP, Data Sheet_7830DA.pdf (thanks!).
++ *
++ * 2010-12-19: add 7832 USB PID ("functionality same as MCS7830"),
++ *             per active notification by manufacturer
++ *
++ * TODO:
++ * - support HIF_REG_CONFIG_SLEEPMODE/HIF_REG_CONFIG_TXENABLE (via autopm?)
++ * - implement ethtool_ops get_pauseparam/set_pauseparam
++ *   via HIF_REG_PAUSE_THRESHOLD (>= revision C only!)
++ * - implement get_eeprom/[set_eeprom]
++ * - switch PHY on/off on ifup/ifdown (perhaps in usbnet.c, via MII)
++ * - mcs7830_get_regs() handling is weird: for rev 2 we return 32 regs,
++ *   can access only ~ 24, remaining user buffer is uninitialized garbage
++ * - anything else?
++ *
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/crc32.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/mii.h>
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <linux/slab.h>
++#include <linux/usb.h>
++#include <linux/usb/usbnet.h>
++
++/* requests */
++#define MCS7830_RD_BMREQ      (USB_DIR_IN  | USB_TYPE_VENDOR | \
++                               USB_RECIP_DEVICE)
++#define MCS7830_WR_BMREQ      (USB_DIR_OUT | USB_TYPE_VENDOR | \
++                               USB_RECIP_DEVICE)
++#define MCS7830_RD_BREQ               0x0E
++#define MCS7830_WR_BREQ               0x0D
++
++#define MCS7830_CTRL_TIMEOUT  1000
++#define MCS7830_MAX_MCAST     64
++
++#define MCS7830_VENDOR_ID     0x9710
++#define MCS7832_PRODUCT_ID    0x7832
++#define MCS7830_PRODUCT_ID    0x7830
++#define MCS7730_PRODUCT_ID    0x7730
++
++#define SITECOM_VENDOR_ID     0x0DF6
++#define LN_030_PRODUCT_ID     0x0021
++
++#define MCS7830_MII_ADVERTISE (ADVERTISE_PAUSE_CAP | ADVERTISE_100FULL | \
++                               ADVERTISE_100HALF | ADVERTISE_10FULL | \
++                               ADVERTISE_10HALF | ADVERTISE_CSMA)
++
++/* HIF_REG_XX corresponding index value */
++enum {
++      HIF_REG_MULTICAST_HASH                  = 0x00,
++      HIF_REG_PACKET_GAP1                     = 0x08,
++      HIF_REG_PACKET_GAP2                     = 0x09,
++      HIF_REG_PHY_DATA                        = 0x0a,
++      HIF_REG_PHY_CMD1                        = 0x0c,
++         HIF_REG_PHY_CMD1_READ                = 0x40,
++         HIF_REG_PHY_CMD1_WRITE               = 0x20,
++         HIF_REG_PHY_CMD1_PHYADDR             = 0x01,
++      HIF_REG_PHY_CMD2                        = 0x0d,
++         HIF_REG_PHY_CMD2_PEND_FLAG_BIT       = 0x80,
++         HIF_REG_PHY_CMD2_READY_FLAG_BIT      = 0x40,
++      HIF_REG_CONFIG                          = 0x0e,
++      /* hmm, spec sez: "R/W", "Except bit 3" (likely TXENABLE). */
++         HIF_REG_CONFIG_CFG                   = 0x80,
++         HIF_REG_CONFIG_SPEED100              = 0x40,
++         HIF_REG_CONFIG_FULLDUPLEX_ENABLE     = 0x20,
++         HIF_REG_CONFIG_RXENABLE              = 0x10,
++         HIF_REG_CONFIG_TXENABLE              = 0x08,
++         HIF_REG_CONFIG_SLEEPMODE             = 0x04,
++         HIF_REG_CONFIG_ALLMULTICAST          = 0x02,
++         HIF_REG_CONFIG_PROMISCUOUS           = 0x01,
++      HIF_REG_ETHERNET_ADDR                   = 0x0f,
++      HIF_REG_FRAME_DROP_COUNTER              = 0x15, /* 0..ff; reset: 0 */
++      HIF_REG_PAUSE_THRESHOLD                 = 0x16,
++         HIF_REG_PAUSE_THRESHOLD_DEFAULT      = 0,
++};
++
++/* Trailing status byte in Ethernet Rx frame */
++enum {
++      MCS7830_RX_SHORT_FRAME          = 0x01, /* < 64 bytes */
++      MCS7830_RX_LENGTH_ERROR         = 0x02, /* framelen != Ethernet length field */
++      MCS7830_RX_ALIGNMENT_ERROR      = 0x04, /* non-even number of nibbles */
++      MCS7830_RX_CRC_ERROR            = 0x08,
++      MCS7830_RX_LARGE_FRAME          = 0x10, /* > 1518 bytes */
++      MCS7830_RX_FRAME_CORRECT        = 0x20, /* frame is correct */
++      /* [7:6] reserved */
++};
++
++struct mcs7830_data {
++      u8 multi_filter[8];
++      u8 config;
++};
++
++static const char driver_name[] = "MOSCHIP usb-ethernet driver";
++
++static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data)
++{
++      return usbnet_read_cmd(dev, MCS7830_RD_BREQ, MCS7830_RD_BMREQ,
++                              0x0000, index, data, size);
++}
++
++static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, const void *data)
++{
++      return usbnet_write_cmd(dev, MCS7830_WR_BREQ, MCS7830_WR_BMREQ,
++                              0x0000, index, data, size);
++}
++
++static void mcs7830_set_reg_async(struct usbnet *dev, u16 index, u16 size, void *data)
++{
++      usbnet_write_cmd_async(dev, MCS7830_WR_BREQ, MCS7830_WR_BMREQ,
++                              0x0000, index, data, size);
++}
++
++static int mcs7830_hif_get_mac_address(struct usbnet *dev, unsigned char *addr)
++{
++      int ret = mcs7830_get_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN, addr);
++      if (ret < 0)
++              return ret;
++      return 0;
++}
++
++static int mcs7830_hif_set_mac_address(struct usbnet *dev, unsigned char *addr)
++{
++      int ret = mcs7830_set_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN, addr);
++
++      if (ret < 0)
++              return ret;
++      return 0;
++}
++
++static int mcs7830_set_mac_address(struct net_device *netdev, void *p)
++{
++      int ret;
++      struct usbnet *dev = netdev_priv(netdev);
++      struct sockaddr *addr = p;
++
++      if (netif_running(netdev))
++              return -EBUSY;
++
++      if (!is_valid_ether_addr(addr->sa_data))
++              return -EADDRNOTAVAIL;
++
++      ret = mcs7830_hif_set_mac_address(dev, addr->sa_data);
++
++      if (ret < 0)
++              return ret;
++
++      /* it worked --> adopt it on netdev side */
++      memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
++
++      return 0;
++}
++
++static int mcs7830_read_phy(struct usbnet *dev, u8 index)
++{
++      int ret;
++      int i;
++      __le16 val;
++
++      u8 cmd[2] = {
++              HIF_REG_PHY_CMD1_READ | HIF_REG_PHY_CMD1_PHYADDR,
++              HIF_REG_PHY_CMD2_PEND_FLAG_BIT | index,
++      };
++
++      mutex_lock(&dev->phy_mutex);
++      /* write the MII command */
++      ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
++      if (ret < 0)
++              goto out;
++
++      /* wait for the data to become valid, should be within < 1ms */
++      for (i = 0; i < 10; i++) {
++              ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
++              if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT))
++                      break;
++              ret = -EIO;
++              msleep(1);
++      }
++      if (ret < 0)
++              goto out;
++
++      /* read actual register contents */
++      ret = mcs7830_get_reg(dev, HIF_REG_PHY_DATA, 2, &val);
++      if (ret < 0)
++              goto out;
++      ret = le16_to_cpu(val);
++      dev_dbg(&dev->udev->dev, "read PHY reg %02x: %04x (%d tries)\n",
++              index, val, i);
++out:
++      mutex_unlock(&dev->phy_mutex);
++      return ret;
++}
++
++static int mcs7830_write_phy(struct usbnet *dev, u8 index, u16 val)
++{
++      int ret;
++      int i;
++      __le16 le_val;
++
++      u8 cmd[2] = {
++              HIF_REG_PHY_CMD1_WRITE | HIF_REG_PHY_CMD1_PHYADDR,
++              HIF_REG_PHY_CMD2_PEND_FLAG_BIT | (index & 0x1F),
++      };
++
++      mutex_lock(&dev->phy_mutex);
++
++      /* write the new register contents */
++      le_val = cpu_to_le16(val);
++      ret = mcs7830_set_reg(dev, HIF_REG_PHY_DATA, 2, &le_val);
++      if (ret < 0)
++              goto out;
++
++      /* write the MII command */
++      ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
++      if (ret < 0)
++              goto out;
++
++      /* wait for the command to be accepted by the PHY */
++      for (i = 0; i < 10; i++) {
++              ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
++              if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT))
++                      break;
++              ret = -EIO;
++              msleep(1);
++      }
++      if (ret < 0)
++              goto out;
++
++      ret = 0;
++      dev_dbg(&dev->udev->dev, "write PHY reg %02x: %04x (%d tries)\n",
++              index, val, i);
++out:
++      mutex_unlock(&dev->phy_mutex);
++      return ret;
++}
++
++/*
++ * This algorithm comes from the original mcs7830 version 1.4 driver,
++ * not sure if it is needed.
++ */
++static int mcs7830_set_autoneg(struct usbnet *dev, int ptrUserPhyMode)
++{
++      int ret;
++      /* Enable all media types */
++      ret = mcs7830_write_phy(dev, MII_ADVERTISE, MCS7830_MII_ADVERTISE);
++
++      /* First reset BMCR */
++      if (!ret)
++              ret = mcs7830_write_phy(dev, MII_BMCR, 0x0000);
++      /* Enable Auto Neg */
++      if (!ret)
++              ret = mcs7830_write_phy(dev, MII_BMCR, BMCR_ANENABLE);
++      /* Restart Auto Neg (Keep the Enable Auto Neg Bit Set) */
++      if (!ret)
++              ret = mcs7830_write_phy(dev, MII_BMCR,
++                              BMCR_ANENABLE | BMCR_ANRESTART  );
++      return ret;
++}
++
++
++/*
++ * if we can read register 22, the chip revision is C or higher
++ */
++static int mcs7830_get_rev(struct usbnet *dev)
++{
++      u8 dummy[2];
++      int ret;
++      ret = mcs7830_get_reg(dev, HIF_REG_FRAME_DROP_COUNTER, 2, dummy);
++      if (ret > 0)
++              return 2; /* Rev C or later */
++      return 1; /* earlier revision */
++}
++
++/*
++ * On rev. C we need to set the pause threshold
++ */
++static void mcs7830_rev_C_fixup(struct usbnet *dev)
++{
++      u8 pause_threshold = HIF_REG_PAUSE_THRESHOLD_DEFAULT;
++      int retry;
++
++      for (retry = 0; retry < 2; retry++) {
++              if (mcs7830_get_rev(dev) == 2) {
++                      dev_info(&dev->udev->dev, "applying rev.C fixup\n");
++                      mcs7830_set_reg(dev, HIF_REG_PAUSE_THRESHOLD,
++                                      1, &pause_threshold);
++              }
++              msleep(1);
++      }
++}
++
++static int mcs7830_mdio_read(struct net_device *netdev, int phy_id,
++                           int location)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      return mcs7830_read_phy(dev, location);
++}
++
++static void mcs7830_mdio_write(struct net_device *netdev, int phy_id,
++                              int location, int val)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      mcs7830_write_phy(dev, location, val);
++}
++
++static int mcs7830_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
++{
++      struct usbnet *dev = netdev_priv(net);
++      return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
++}
++
++static inline struct mcs7830_data *mcs7830_get_data(struct usbnet *dev)
++{
++      return (struct mcs7830_data *)&dev->data;
++}
++
++static void mcs7830_hif_update_multicast_hash(struct usbnet *dev)
++{
++      struct mcs7830_data *data = mcs7830_get_data(dev);
++      mcs7830_set_reg_async(dev, HIF_REG_MULTICAST_HASH,
++                              sizeof data->multi_filter,
++                              data->multi_filter);
++}
++
++static void mcs7830_hif_update_config(struct usbnet *dev)
++{
++      /* implementation specific to data->config
++           (argument needs to be heap-based anyway - USB DMA!) */
++      struct mcs7830_data *data = mcs7830_get_data(dev);
++      mcs7830_set_reg_async(dev, HIF_REG_CONFIG, 1, &data->config);
++}
++
++static void mcs7830_data_set_multicast(struct net_device *net)
++{
++      struct usbnet *dev = netdev_priv(net);
++      struct mcs7830_data *data = mcs7830_get_data(dev);
++
++      memset(data->multi_filter, 0, sizeof data->multi_filter);
++
++      data->config = HIF_REG_CONFIG_TXENABLE;
++
++      /* this should not be needed, but it doesn't work otherwise */
++      data->config |= HIF_REG_CONFIG_ALLMULTICAST;
++
++      if (net->flags & IFF_PROMISC) {
++              data->config |= HIF_REG_CONFIG_PROMISCUOUS;
++      } else if (net->flags & IFF_ALLMULTI ||
++                 netdev_mc_count(net) > MCS7830_MAX_MCAST) {
++              data->config |= HIF_REG_CONFIG_ALLMULTICAST;
++      } else if (netdev_mc_empty(net)) {
++              /* just broadcast and directed */
++      } else {
++              /* We use the 20 byte dev->data
++               * for our 8 byte filter buffer
++               * to avoid allocating memory that
++               * is tricky to free later */
++              struct netdev_hw_addr *ha;
++              u32 crc_bits;
++
++              /* Build the multicast hash filter. */
++              netdev_for_each_mc_addr(ha, net) {
++                      crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
++                      data->multi_filter[crc_bits >> 3] |= 1 << (crc_bits & 7);
++              }
++      }
++}
++
++static int mcs7830_apply_base_config(struct usbnet *dev)
++{
++      int ret;
++
++      /* re-configure known MAC (suspend case etc.) */
++      ret = mcs7830_hif_set_mac_address(dev, dev->net->dev_addr);
++      if (ret) {
++              dev_info(&dev->udev->dev, "Cannot set MAC address\n");
++              goto out;
++      }
++
++      /* Set up PHY */
++      ret = mcs7830_set_autoneg(dev, 0);
++      if (ret) {
++              dev_info(&dev->udev->dev, "Cannot set autoneg\n");
++              goto out;
++      }
++
++      mcs7830_hif_update_multicast_hash(dev);
++      mcs7830_hif_update_config(dev);
++
++      mcs7830_rev_C_fixup(dev);
++      ret = 0;
++out:
++      return ret;
++}
++
++/* credits go to asix_set_multicast */
++static void mcs7830_set_multicast(struct net_device *net)
++{
++      struct usbnet *dev = netdev_priv(net);
++
++      mcs7830_data_set_multicast(net);
++
++      mcs7830_hif_update_multicast_hash(dev);
++      mcs7830_hif_update_config(dev);
++}
++
++static int mcs7830_get_regs_len(struct net_device *net)
++{
++      struct usbnet *dev = netdev_priv(net);
++
++      switch (mcs7830_get_rev(dev)) {
++      case 1:
++              return 21;
++      case 2:
++              return 32;
++      }
++      return 0;
++}
++
++static void mcs7830_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *drvinfo)
++{
++      usbnet_get_drvinfo(net, drvinfo);
++      drvinfo->regdump_len = mcs7830_get_regs_len(net);
++}
++
++static void mcs7830_get_regs(struct net_device *net, struct ethtool_regs *regs, void *data)
++{
++      struct usbnet *dev = netdev_priv(net);
++
++      regs->version = mcs7830_get_rev(dev);
++      mcs7830_get_reg(dev, 0, regs->len, data);
++}
++
++static const struct ethtool_ops mcs7830_ethtool_ops = {
++      .get_drvinfo            = mcs7830_get_drvinfo,
++      .get_regs_len           = mcs7830_get_regs_len,
++      .get_regs               = mcs7830_get_regs,
++
++      /* common usbnet calls */
++      .get_link               = usbnet_get_link,
++      .get_msglevel           = usbnet_get_msglevel,
++      .set_msglevel           = usbnet_set_msglevel,
++      .get_settings           = usbnet_get_settings,
++      .set_settings           = usbnet_set_settings,
++      .nway_reset             = usbnet_nway_reset,
++};
++
++static const struct net_device_ops mcs7830_netdev_ops = {
++      .ndo_open               = usbnet_open,
++      .ndo_stop               = usbnet_stop,
++      .ndo_start_xmit         = usbnet_start_xmit,
++      .ndo_tx_timeout         = usbnet_tx_timeout,
++      .ndo_change_mtu         = usbnet_change_mtu,
++      .ndo_validate_addr      = eth_validate_addr,
++      .ndo_do_ioctl           = mcs7830_ioctl,
++      .ndo_set_rx_mode        = mcs7830_set_multicast,
++      .ndo_set_mac_address    = mcs7830_set_mac_address,
++};
++
++static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
++{
++      struct net_device *net = dev->net;
++      int ret;
++      int retry;
++
++      /* Initial startup: Gather MAC address setting from EEPROM */
++      ret = -EINVAL;
++      for (retry = 0; retry < 5 && ret; retry++)
++              ret = mcs7830_hif_get_mac_address(dev, net->dev_addr);
++      if (ret) {
++              dev_warn(&dev->udev->dev, "Cannot read MAC address\n");
++              goto out;
++      }
++
++      mcs7830_data_set_multicast(net);
++
++      ret = mcs7830_apply_base_config(dev);
++      if (ret)
++              goto out;
++
++      net->ethtool_ops = &mcs7830_ethtool_ops;
++      net->netdev_ops = &mcs7830_netdev_ops;
++
++      /* reserve space for the status byte on rx */
++      dev->rx_urb_size = ETH_FRAME_LEN + 1;
++
++      dev->mii.mdio_read = mcs7830_mdio_read;
++      dev->mii.mdio_write = mcs7830_mdio_write;
++      dev->mii.dev = net;
++      dev->mii.phy_id_mask = 0x3f;
++      dev->mii.reg_num_mask = 0x1f;
++      dev->mii.phy_id = *((u8 *) net->dev_addr + 1);
++
++      ret = usbnet_get_endpoints(dev, udev);
++out:
++      return ret;
++}
++
++/* The chip always appends a status byte that we need to strip */
++static int mcs7830_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
++{
++      u8 status;
++
++      /* This check is no longer done by usbnet */
++      if (skb->len < dev->net->hard_header_len) {
++              dev_err(&dev->udev->dev, "unexpected tiny rx frame\n");
++              return 0;
++      }
++
++      skb_trim(skb, skb->len - 1);
++      status = skb->data[skb->len];
++
++      if (status != MCS7830_RX_FRAME_CORRECT) {
++              dev_dbg(&dev->udev->dev, "rx fixup status %x\n", status);
++
++              /* hmm, perhaps usbnet.c already sees a globally visible
++                 frame error and increments rx_errors on its own already? */
++              dev->net->stats.rx_errors++;
++
++              if (status &    (MCS7830_RX_SHORT_FRAME
++                              |MCS7830_RX_LENGTH_ERROR
++                              |MCS7830_RX_LARGE_FRAME))
++                      dev->net->stats.rx_length_errors++;
++              if (status & MCS7830_RX_ALIGNMENT_ERROR)
++                      dev->net->stats.rx_frame_errors++;
++              if (status & MCS7830_RX_CRC_ERROR)
++                      dev->net->stats.rx_crc_errors++;
++      }
++
++      return skb->len > 0;
++}
++
++static void mcs7830_status(struct usbnet *dev, struct urb *urb)
++{
++      u8 *buf = urb->transfer_buffer;
++      bool link, link_changed;
++
++      if (urb->actual_length < 16)
++              return;
++
++      link = !(buf[1] == 0x20);
++      link_changed = netif_carrier_ok(dev->net) != link;
++      if (link_changed) {
++              usbnet_link_change(dev, link, 0);
++              netdev_dbg(dev->net, "Link Status is: %d\n", link);
++      }
++}
++
++static const struct driver_info moschip_info = {
++      .description    = "MOSCHIP 7830/7832/7730 usb-NET adapter",
++      .bind           = mcs7830_bind,
++      .rx_fixup       = mcs7830_rx_fixup,
++      .flags          = FLAG_ETHER | FLAG_LINK_INTR,
++      .status         = mcs7830_status,
++      .in             = 1,
++      .out            = 2,
++};
++
++static const struct driver_info sitecom_info = {
++      .description    = "Sitecom LN-30 usb-NET adapter",
++      .bind           = mcs7830_bind,
++      .rx_fixup       = mcs7830_rx_fixup,
++      .flags          = FLAG_ETHER | FLAG_LINK_INTR,
++      .status         = mcs7830_status,
++      .in             = 1,
++      .out            = 2,
++};
++
++static const struct usb_device_id products[] = {
++      {
++              USB_DEVICE(MCS7830_VENDOR_ID, MCS7832_PRODUCT_ID),
++              .driver_info = (unsigned long) &moschip_info,
++      },
++      {
++              USB_DEVICE(MCS7830_VENDOR_ID, MCS7830_PRODUCT_ID),
++              .driver_info = (unsigned long) &moschip_info,
++      },
++      {
++              USB_DEVICE(MCS7830_VENDOR_ID, MCS7730_PRODUCT_ID),
++              .driver_info = (unsigned long) &moschip_info,
++      },
++      {
++              USB_DEVICE(SITECOM_VENDOR_ID, LN_030_PRODUCT_ID),
++              .driver_info = (unsigned long) &sitecom_info,
++      },
++      {},
++};
++MODULE_DEVICE_TABLE(usb, products);
++
++static int mcs7830_reset_resume (struct usb_interface *intf)
++{
++      /* YES, this function is successful enough that ethtool -d
++           does show same output pre-/post-suspend */
++
++      struct usbnet           *dev = usb_get_intfdata(intf);
++
++      mcs7830_apply_base_config(dev);
++
++      usbnet_resume(intf);
++
++      return 0;
++}
++
++static struct usb_driver mcs7830_driver = {
++      .name = driver_name,
++      .id_table = products,
++      .probe = usbnet_probe,
++      .disconnect = usbnet_disconnect,
++      .suspend = usbnet_suspend,
++      .resume = usbnet_resume,
++      .reset_resume = mcs7830_reset_resume,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(mcs7830_driver);
++
++MODULE_DESCRIPTION("USB to network adapter MCS7830)");
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/net1080.c backports-3.18.1-1/drivers/net/usb/net1080.c
+--- backports-3.18.1-1.org/drivers/net/usb/net1080.c   1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/net1080.c       2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,544 @@
++/*
++ * Net1080 based USB host-to-host cables
++ * Copyright (C) 2000-2005 by David Brownell
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ */
++
++// #define    DEBUG                   // error path messages, extra info
++// #define    VERBOSE                 // more; success messages
++
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/workqueue.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/usb/usbnet.h>
++#include <linux/slab.h>
++
++#include <asm/unaligned.h>
++
++
++/*
++ * Netchip 1080 driver ... http://www.netchip.com
++ * (Sept 2004:  End-of-life announcement has been sent.)
++ * Used in (some) LapLink cables
++ */
++
++#define frame_errors  data[1]
++
++/*
++ * NetChip framing of ethernet packets, supporting additional error
++ * checks for links that may drop bulk packets from inside messages.
++ * Odd USB length == always short read for last usb packet.
++ *    - nc_header
++ *    - Ethernet header (14 bytes)
++ *    - payload
++ *    - (optional padding byte, if needed so length becomes odd)
++ *    - nc_trailer
++ *
++ * This framing is to be avoided for non-NetChip devices.
++ */
++
++struct nc_header {            // packed:
++      __le16  hdr_len;                // sizeof nc_header (LE, all)
++      __le16  packet_len;             // payload size (including ethhdr)
++      __le16  packet_id;              // detects dropped packets
++#define MIN_HEADER    6
++
++      // all else is optional, and must start with:
++      // __le16       vendorId;       // from usb-if
++      // __le16       productId;
++} __packed;
++
++#define       PAD_BYTE        ((unsigned char)0xAC)
++
++struct nc_trailer {
++      __le16  packet_id;
++} __packed;
++
++// packets may use FLAG_FRAMING_NC and optional pad
++#define FRAMED_SIZE(mtu) (sizeof (struct nc_header) \
++                              + sizeof (struct ethhdr) \
++                              + (mtu) \
++                              + 1 \
++                              + sizeof (struct nc_trailer))
++
++#define MIN_FRAMED    FRAMED_SIZE(0)
++
++/* packets _could_ be up to 64KB... */
++#define NC_MAX_PACKET 32767
++
++
++/*
++ * Zero means no timeout; else, how long a 64 byte bulk packet may be queued
++ * before the hardware drops it.  If that's done, the driver will need to
++ * frame network packets to guard against the dropped USB packets.  The win32
++ * driver sets this for both sides of the link.
++ */
++#define       NC_READ_TTL_MS  ((u8)255)       // ms
++
++/*
++ * We ignore most registers and EEPROM contents.
++ */
++#define       REG_USBCTL      ((u8)0x04)
++#define REG_TTL               ((u8)0x10)
++#define REG_STATUS    ((u8)0x11)
++
++/*
++ * Vendor specific requests to read/write data
++ */
++#define       REQUEST_REGISTER        ((u8)0x10)
++#define       REQUEST_EEPROM          ((u8)0x11)
++
++static int
++nc_vendor_read(struct usbnet *dev, u8 req, u8 regnum, u16 *retval_ptr)
++{
++      int status = usbnet_read_cmd(dev, req,
++                                   USB_DIR_IN | USB_TYPE_VENDOR |
++                                   USB_RECIP_DEVICE,
++                                   0, regnum, retval_ptr,
++                                   sizeof *retval_ptr);
++      if (status > 0)
++              status = 0;
++      if (!status)
++              le16_to_cpus(retval_ptr);
++      return status;
++}
++
++static inline int
++nc_register_read(struct usbnet *dev, u8 regnum, u16 *retval_ptr)
++{
++      return nc_vendor_read(dev, REQUEST_REGISTER, regnum, retval_ptr);
++}
++
++// no retval ... can become async, usable in_interrupt()
++static void
++nc_vendor_write(struct usbnet *dev, u8 req, u8 regnum, u16 value)
++{
++      usbnet_write_cmd(dev, req,
++                       USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
++                       value, regnum, NULL, 0);
++}
++
++static inline void
++nc_register_write(struct usbnet *dev, u8 regnum, u16 value)
++{
++      nc_vendor_write(dev, REQUEST_REGISTER, regnum, value);
++}
++
++
++#if 0
++static void nc_dump_registers(struct usbnet *dev)
++{
++      u8      reg;
++      u16     *vp = kmalloc(sizeof (u16));
++
++      if (!vp)
++              return;
++
++      netdev_dbg(dev->net, "registers:\n");
++      for (reg = 0; reg < 0x20; reg++) {
++              int retval;
++
++              // reading some registers is trouble
++              if (reg >= 0x08 && reg <= 0xf)
++                      continue;
++              if (reg >= 0x12 && reg <= 0x1e)
++                      continue;
++
++              retval = nc_register_read(dev, reg, vp);
++              if (retval < 0)
++                      netdev_dbg(dev->net, "reg [0x%x] ==> error %d\n",
++                                 reg, retval);
++              else
++                      netdev_dbg(dev->net, "reg [0x%x] = 0x%x\n", reg, *vp);
++      }
++      kfree(vp);
++}
++#endif
++
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * Control register
++ */
++
++#define       USBCTL_WRITABLE_MASK    0x1f0f
++// bits 15-13 reserved, r/o
++#define       USBCTL_ENABLE_LANG      (1 << 12)
++#define       USBCTL_ENABLE_MFGR      (1 << 11)
++#define       USBCTL_ENABLE_PROD      (1 << 10)
++#define       USBCTL_ENABLE_SERIAL    (1 << 9)
++#define       USBCTL_ENABLE_DEFAULTS  (1 << 8)
++// bits 7-4 reserved, r/o
++#define       USBCTL_FLUSH_OTHER      (1 << 3)
++#define       USBCTL_FLUSH_THIS       (1 << 2)
++#define       USBCTL_DISCONN_OTHER    (1 << 1)
++#define       USBCTL_DISCONN_THIS     (1 << 0)
++
++static inline void nc_dump_usbctl(struct usbnet *dev, u16 usbctl)
++{
++      netif_dbg(dev, link, dev->net,
++                "net1080 %s-%s usbctl 0x%x:%s%s%s%s%s; this%s%s; other%s%s; r/o 0x%x\n",
++                dev->udev->bus->bus_name, dev->udev->devpath,
++                usbctl,
++                (usbctl & USBCTL_ENABLE_LANG) ? " lang" : "",
++                (usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "",
++                (usbctl & USBCTL_ENABLE_PROD) ? " prod" : "",
++                (usbctl & USBCTL_ENABLE_SERIAL) ? " serial" : "",
++                (usbctl & USBCTL_ENABLE_DEFAULTS) ? " defaults" : "",
++
++                (usbctl & USBCTL_FLUSH_THIS) ? " FLUSH" : "",
++                (usbctl & USBCTL_DISCONN_THIS) ? " DIS" : "",
++
++                (usbctl & USBCTL_FLUSH_OTHER) ? " FLUSH" : "",
++                (usbctl & USBCTL_DISCONN_OTHER) ? " DIS" : "",
++
++                usbctl & ~USBCTL_WRITABLE_MASK);
++}
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * Status register
++ */
++
++#define       STATUS_PORT_A           (1 << 15)
++
++#define       STATUS_CONN_OTHER       (1 << 14)
++#define       STATUS_SUSPEND_OTHER    (1 << 13)
++#define       STATUS_MAILBOX_OTHER    (1 << 12)
++#define       STATUS_PACKETS_OTHER(n) (((n) >> 8) & 0x03)
++
++#define       STATUS_CONN_THIS        (1 << 6)
++#define       STATUS_SUSPEND_THIS     (1 << 5)
++#define       STATUS_MAILBOX_THIS     (1 << 4)
++#define       STATUS_PACKETS_THIS(n)  (((n) >> 0) & 0x03)
++
++#define       STATUS_UNSPEC_MASK      0x0c8c
++#define       STATUS_NOISE_MASK       ((u16)~(0x0303|STATUS_UNSPEC_MASK))
++
++
++static inline void nc_dump_status(struct usbnet *dev, u16 status)
++{
++      netif_dbg(dev, link, dev->net,
++                "net1080 %s-%s status 0x%x: this (%c) PKT=%d%s%s%s; other PKT=%d%s%s%s; unspec 0x%x\n",
++                dev->udev->bus->bus_name, dev->udev->devpath,
++                status,
++
++                // XXX the packet counts don't seem right
++                // (1 at reset, not 0); maybe UNSPEC too
++
++                (status & STATUS_PORT_A) ? 'A' : 'B',
++                STATUS_PACKETS_THIS(status),
++                (status & STATUS_CONN_THIS) ? " CON" : "",
++                (status & STATUS_SUSPEND_THIS) ? " SUS" : "",
++                (status & STATUS_MAILBOX_THIS) ? " MBOX" : "",
++
++                STATUS_PACKETS_OTHER(status),
++                (status & STATUS_CONN_OTHER) ? " CON" : "",
++                (status & STATUS_SUSPEND_OTHER) ? " SUS" : "",
++                (status & STATUS_MAILBOX_OTHER) ? " MBOX" : "",
++
++                status & STATUS_UNSPEC_MASK);
++}
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * TTL register
++ */
++
++#define       TTL_THIS(ttl)   (0x00ff & ttl)
++#define       TTL_OTHER(ttl)  (0x00ff & (ttl >> 8))
++#define MK_TTL(this,other)    ((u16)(((other)<<8)|(0x00ff&(this))))
++
++static inline void nc_dump_ttl(struct usbnet *dev, u16 ttl)
++{
++      netif_dbg(dev, link, dev->net, "net1080 %s-%s ttl 0x%x this = %d, other = %d\n",
++                dev->udev->bus->bus_name, dev->udev->devpath,
++                ttl, TTL_THIS(ttl), TTL_OTHER(ttl));
++}
++
++/*-------------------------------------------------------------------------*/
++
++static int net1080_reset(struct usbnet *dev)
++{
++      u16             usbctl, status, ttl;
++      u16             vp;
++      int             retval;
++
++      // nc_dump_registers(dev);
++
++      if ((retval = nc_register_read(dev, REG_STATUS, &vp)) < 0) {
++              netdev_dbg(dev->net, "can't read %s-%s status: %d\n",
++                         dev->udev->bus->bus_name, dev->udev->devpath, retval);
++              goto done;
++      }
++      status = vp;
++      nc_dump_status(dev, status);
++
++      if ((retval = nc_register_read(dev, REG_USBCTL, &vp)) < 0) {
++              netdev_dbg(dev->net, "can't read USBCTL, %d\n", retval);
++              goto done;
++      }
++      usbctl = vp;
++      nc_dump_usbctl(dev, usbctl);
++
++      nc_register_write(dev, REG_USBCTL,
++                      USBCTL_FLUSH_THIS | USBCTL_FLUSH_OTHER);
++
++      if ((retval = nc_register_read(dev, REG_TTL, &vp)) < 0) {
++              netdev_dbg(dev->net, "can't read TTL, %d\n", retval);
++              goto done;
++      }
++      ttl = vp;
++      // nc_dump_ttl(dev, ttl);
++
++      nc_register_write(dev, REG_TTL,
++                      MK_TTL(NC_READ_TTL_MS, TTL_OTHER(ttl)) );
++      netdev_dbg(dev->net, "assigned TTL, %d ms\n", NC_READ_TTL_MS);
++
++      netif_info(dev, link, dev->net, "port %c, peer %sconnected\n",
++                 (status & STATUS_PORT_A) ? 'A' : 'B',
++                 (status & STATUS_CONN_OTHER) ? "" : "dis");
++      retval = 0;
++
++done:
++      return retval;
++}
++
++static int net1080_check_connect(struct usbnet *dev)
++{
++      int                     retval;
++      u16                     status;
++      u16                     vp;
++
++      retval = nc_register_read(dev, REG_STATUS, &vp);
++      status = vp;
++      if (retval != 0) {
++              netdev_dbg(dev->net, "net1080_check_conn read - %d\n", retval);
++              return retval;
++      }
++      if ((status & STATUS_CONN_OTHER) != STATUS_CONN_OTHER)
++              return -ENOLINK;
++      return 0;
++}
++
++static void nc_ensure_sync(struct usbnet *dev)
++{
++      if (++dev->frame_errors <= 5)
++              return;
++
++      if (usbnet_write_cmd_async(dev, REQUEST_REGISTER,
++                                      USB_DIR_OUT | USB_TYPE_VENDOR |
++                                      USB_RECIP_DEVICE,
++                                      USBCTL_FLUSH_THIS |
++                                      USBCTL_FLUSH_OTHER,
++                                      REG_USBCTL, NULL, 0))
++              return;
++
++      netif_dbg(dev, rx_err, dev->net,
++                "flush net1080; too many framing errors\n");
++      dev->frame_errors = 0;
++}
++
++static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
++{
++      struct nc_header        *header;
++      struct nc_trailer       *trailer;
++      u16                     hdr_len, packet_len;
++
++      /* This check is no longer done by usbnet */
++      if (skb->len < dev->net->hard_header_len)
++              return 0;
++
++      if (!(skb->len & 0x01)) {
++              netdev_dbg(dev->net, "rx framesize %d range %d..%d mtu %d\n",
++                         skb->len, dev->net->hard_header_len, dev->hard_mtu,
++                         dev->net->mtu);
++              dev->net->stats.rx_frame_errors++;
++              nc_ensure_sync(dev);
++              return 0;
++      }
++
++      header = (struct nc_header *) skb->data;
++      hdr_len = le16_to_cpup(&header->hdr_len);
++      packet_len = le16_to_cpup(&header->packet_len);
++      if (FRAMED_SIZE(packet_len) > NC_MAX_PACKET) {
++              dev->net->stats.rx_frame_errors++;
++              netdev_dbg(dev->net, "packet too big, %d\n", packet_len);
++              nc_ensure_sync(dev);
++              return 0;
++      } else if (hdr_len < MIN_HEADER) {
++              dev->net->stats.rx_frame_errors++;
++              netdev_dbg(dev->net, "header too short, %d\n", hdr_len);
++              nc_ensure_sync(dev);
++              return 0;
++      } else if (hdr_len > MIN_HEADER) {
++              // out of band data for us?
++              netdev_dbg(dev->net, "header OOB, %d bytes\n", hdr_len - MIN_HEADER);
++              nc_ensure_sync(dev);
++              // switch (vendor/product ids) { ... }
++      }
++      skb_pull(skb, hdr_len);
++
++      trailer = (struct nc_trailer *)
++              (skb->data + skb->len - sizeof *trailer);
++      skb_trim(skb, skb->len - sizeof *trailer);
++
++      if ((packet_len & 0x01) == 0) {
++              if (skb->data [packet_len] != PAD_BYTE) {
++                      dev->net->stats.rx_frame_errors++;
++                      netdev_dbg(dev->net, "bad pad\n");
++                      return 0;
++              }
++              skb_trim(skb, skb->len - 1);
++      }
++      if (skb->len != packet_len) {
++              dev->net->stats.rx_frame_errors++;
++              netdev_dbg(dev->net, "bad packet len %d (expected %d)\n",
++                         skb->len, packet_len);
++              nc_ensure_sync(dev);
++              return 0;
++      }
++      if (header->packet_id != get_unaligned(&trailer->packet_id)) {
++              dev->net->stats.rx_fifo_errors++;
++              netdev_dbg(dev->net, "(2+ dropped) rx packet_id mismatch 0x%x 0x%x\n",
++                         le16_to_cpu(header->packet_id),
++                         le16_to_cpu(trailer->packet_id));
++              return 0;
++      }
++#if 0
++      netdev_dbg(dev->net, "frame <rx h %d p %d id %d\n", header->hdr_len,
++                 header->packet_len, header->packet_id);
++#endif
++      dev->frame_errors = 0;
++      return 1;
++}
++
++static struct sk_buff *
++net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
++{
++      struct sk_buff          *skb2;
++      struct nc_header        *header = NULL;
++      struct nc_trailer       *trailer = NULL;
++      int                     padlen = sizeof (struct nc_trailer);
++      int                     len = skb->len;
++
++      if (!((len + padlen + sizeof (struct nc_header)) & 0x01))
++              padlen++;
++      if (!skb_cloned(skb)) {
++              int     headroom = skb_headroom(skb);
++              int     tailroom = skb_tailroom(skb);
++
++              if (padlen <= tailroom &&
++                  sizeof(struct nc_header) <= headroom)
++                      /* There's enough head and tail room */
++                      goto encapsulate;
++
++              if ((sizeof (struct nc_header) + padlen) <
++                              (headroom + tailroom)) {
++                      /* There's enough total room, so just readjust */
++                      skb->data = memmove(skb->head
++                                              + sizeof (struct nc_header),
++                                          skb->data, skb->len);
++                      skb_set_tail_pointer(skb, len);
++                      goto encapsulate;
++              }
++      }
++
++      /* Create a new skb to use with the correct size */
++      skb2 = skb_copy_expand(skb,
++                              sizeof (struct nc_header),
++                              padlen,
++                              flags);
++      dev_kfree_skb_any(skb);
++      if (!skb2)
++              return skb2;
++      skb = skb2;
++
++encapsulate:
++      /* header first */
++      header = (struct nc_header *) skb_push(skb, sizeof *header);
++      header->hdr_len = cpu_to_le16(sizeof (*header));
++      header->packet_len = cpu_to_le16(len);
++      header->packet_id = cpu_to_le16((u16)dev->xid++);
++
++      /* maybe pad; then trailer */
++      if (!((skb->len + sizeof *trailer) & 0x01))
++              *skb_put(skb, 1) = PAD_BYTE;
++      trailer = (struct nc_trailer *) skb_put(skb, sizeof *trailer);
++      put_unaligned(header->packet_id, &trailer->packet_id);
++#if 0
++      netdev_dbg(dev->net, "frame >tx h %d p %d id %d\n",
++                 header->hdr_len, header->packet_len,
++                 header->packet_id);
++#endif
++      return skb;
++}
++
++static int net1080_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      unsigned        extra = sizeof (struct nc_header)
++                              + 1
++                              + sizeof (struct nc_trailer);
++
++      dev->net->hard_header_len += extra;
++      dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
++      dev->hard_mtu = NC_MAX_PACKET;
++      return usbnet_get_endpoints (dev, intf);
++}
++
++static const struct driver_info       net1080_info = {
++      .description =  "NetChip TurboCONNECT",
++      .flags =        FLAG_POINTTOPOINT | FLAG_FRAMING_NC,
++      .bind =         net1080_bind,
++      .reset =        net1080_reset,
++      .check_connect = net1080_check_connect,
++      .rx_fixup =     net1080_rx_fixup,
++      .tx_fixup =     net1080_tx_fixup,
++};
++
++static const struct usb_device_id     products [] = {
++{
++      USB_DEVICE(0x0525, 0x1080),     // NetChip ref design
++      .driver_info =  (unsigned long) &net1080_info,
++}, {
++      USB_DEVICE(0x06D0, 0x0622),     // Laplink Gold
++      .driver_info =  (unsigned long) &net1080_info,
++},
++      { },            // END
++};
++MODULE_DEVICE_TABLE(usb, products);
++
++static struct usb_driver net1080_driver = {
++      .name =         "net1080",
++      .id_table =     products,
++      .probe =        usbnet_probe,
++      .disconnect =   usbnet_disconnect,
++      .suspend =      usbnet_suspend,
++      .resume =       usbnet_resume,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(net1080_driver);
++
++MODULE_AUTHOR("David Brownell");
++MODULE_DESCRIPTION("NetChip 1080 based USB Host-to-Host Links");
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/pegasus.c backports-3.18.1-1/drivers/net/usb/pegasus.c
+--- backports-3.18.1-1.org/drivers/net/usb/pegasus.c   1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/pegasus.c       2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,1335 @@
++/*
++ *  Copyright (c) 1999-2013 Petko Manolov (petkan@nucleusys.com)
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ *    ChangeLog:
++ *            ....    Most of the time spent on reading sources & docs.
++ *            v0.2.x  First official release for the Linux kernel.
++ *            v0.3.0  Beutified and structured, some bugs fixed.
++ *            v0.3.x  URBifying bulk requests and bugfixing. First relatively
++ *                    stable release. Still can touch device's registers only
++ *                    from top-halves.
++ *            v0.4.0  Control messages remained unurbified are now URBs.
++ *                    Now we can touch the HW at any time.
++ *            v0.4.9  Control urbs again use process context to wait. Argh...
++ *                    Some long standing bugs (enable_net_traffic) fixed.
++ *                    Also nasty trick about resubmiting control urb from
++ *                    interrupt context used. Please let me know how it
++ *                    behaves. Pegasus II support added since this version.
++ *                    TODO: suppressing HCD warnings spewage on disconnect.
++ *            v0.4.13 Ethernet address is now set at probe(), not at open()
++ *                    time as this seems to break dhcpd.
++ *            v0.5.0  branch to 2.5.x kernels
++ *            v0.5.1  ethtool support added
++ *            v0.5.5  rx socket buffers are in a pool and the their allocation
++ *                    is out of the interrupt routine.
++ *            ...
++ *            v0.9.3  simplified [get|set]_register(s), async update registers
++ *                    logic revisited, receive skb_pool removed.
++ */
++
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/module.h>
++#include <asm/byteorder.h>
++#include <asm/uaccess.h>
++#include "pegasus.h"
++
++/*
++ * Version Information
++ */
++#define DRIVER_VERSION "v0.9.3 (2013/04/25)"
++#define DRIVER_AUTHOR "Petko Manolov <petkan@nucleusys.com>"
++#define DRIVER_DESC "Pegasus/Pegasus II USB Ethernet driver"
++
++static const char driver_name[] = "pegasus";
++
++#undef        PEGASUS_WRITE_EEPROM
++#define       BMSR_MEDIA      (BMSR_10HALF | BMSR_10FULL | BMSR_100HALF | \
++                      BMSR_100FULL | BMSR_ANEGCAPABLE)
++
++static bool loopback;
++static bool mii_mode;
++static char *devid;
++
++static struct usb_eth_dev usb_dev_id[] = {
++#define       PEGASUS_DEV(pn, vid, pid, flags)        \
++      {.name = pn, .vendor = vid, .device = pid, .private = flags},
++#define PEGASUS_DEV_CLASS(pn, vid, pid, dclass, flags) \
++      PEGASUS_DEV(pn, vid, pid, flags)
++#include "pegasus.h"
++#undef        PEGASUS_DEV
++#undef        PEGASUS_DEV_CLASS
++      {NULL, 0, 0, 0},
++      {NULL, 0, 0, 0}
++};
++
++static struct usb_device_id pegasus_ids[] = {
++#define       PEGASUS_DEV(pn, vid, pid, flags) \
++      {.match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = vid, .idProduct = pid},
++/*
++ * The Belkin F8T012xx1 bluetooth adaptor has the same vendor and product
++ * IDs as the Belkin F5D5050, so we need to teach the pegasus driver to
++ * ignore adaptors belonging to the "Wireless" class 0xE0. For this one
++ * case anyway, seeing as the pegasus is for "Wired" adaptors.
++ */
++#define PEGASUS_DEV_CLASS(pn, vid, pid, dclass, flags) \
++      {.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_CLASS), \
++      .idVendor = vid, .idProduct = pid, .bDeviceClass = dclass},
++#include "pegasus.h"
++#undef        PEGASUS_DEV
++#undef        PEGASUS_DEV_CLASS
++      {},
++      {}
++};
++
++MODULE_AUTHOR(DRIVER_AUTHOR);
++MODULE_DESCRIPTION(DRIVER_DESC);
++MODULE_LICENSE("GPL");
++module_param(loopback, bool, 0);
++module_param(mii_mode, bool, 0);
++module_param(devid, charp, 0);
++MODULE_PARM_DESC(loopback, "Enable MAC loopback mode (bit 0)");
++MODULE_PARM_DESC(mii_mode, "Enable HomePNA mode (bit 0),default=MII mode = 0");
++MODULE_PARM_DESC(devid, "The format is: 'DEV_name:VendorID:DeviceID:Flags'");
++
++/* use ethtool to change the level for any given device */
++static int msg_level = -1;
++module_param(msg_level, int, 0);
++MODULE_PARM_DESC(msg_level, "Override default message level");
++
++MODULE_DEVICE_TABLE(usb, pegasus_ids);
++static const struct net_device_ops pegasus_netdev_ops;
++
++/*****/
++
++static void async_ctrl_callback(struct urb *urb)
++{
++      struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
++      int status = urb->status;
++
++      if (status < 0)
++              dev_dbg(&urb->dev->dev, "%s failed with %d", __func__, status);
++      kfree(req);
++      usb_free_urb(urb);
++}
++
++static int get_registers(pegasus_t *pegasus, __u16 indx, __u16 size, void *data)
++{
++      int ret;
++
++      ret = usb_control_msg(pegasus->usb, usb_rcvctrlpipe(pegasus->usb, 0),
++                            PEGASUS_REQ_GET_REGS, PEGASUS_REQT_READ, 0,
++                            indx, data, size, 1000);
++      if (ret < 0)
++              netif_dbg(pegasus, drv, pegasus->net,
++                        "%s returned %d\n", __func__, ret);
++      return ret;
++}
++
++static int set_registers(pegasus_t *pegasus, __u16 indx, __u16 size, void *data)
++{
++      int ret;
++
++      ret = usb_control_msg(pegasus->usb, usb_sndctrlpipe(pegasus->usb, 0),
++                            PEGASUS_REQ_SET_REGS, PEGASUS_REQT_WRITE, 0,
++                            indx, data, size, 100);
++      if (ret < 0)
++              netif_dbg(pegasus, drv, pegasus->net,
++                        "%s returned %d\n", __func__, ret);
++      return ret;
++}
++
++static int set_register(pegasus_t *pegasus, __u16 indx, __u8 data)
++{
++      int ret;
++
++      ret = usb_control_msg(pegasus->usb, usb_sndctrlpipe(pegasus->usb, 0),
++                            PEGASUS_REQ_SET_REG, PEGASUS_REQT_WRITE, data,
++                            indx, &data, 1, 1000);
++      if (ret < 0)
++              netif_dbg(pegasus, drv, pegasus->net,
++                        "%s returned %d\n", __func__, ret);
++      return ret;
++}
++
++static int update_eth_regs_async(pegasus_t *pegasus)
++{
++      int ret = -ENOMEM;
++      struct urb *async_urb;
++      struct usb_ctrlrequest *req;
++
++      req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
++      if (req == NULL)
++              return ret;
++
++      async_urb = usb_alloc_urb(0, GFP_ATOMIC);
++      if (async_urb == NULL) {
++              kfree(req);
++              return ret;
++      }
++      req->bRequestType = PEGASUS_REQT_WRITE;
++      req->bRequest = PEGASUS_REQ_SET_REGS;
++      req->wValue = cpu_to_le16(0);
++      req->wIndex = cpu_to_le16(EthCtrl0);
++      req->wLength = cpu_to_le16(3);
++
++      usb_fill_control_urb(async_urb, pegasus->usb,
++                           usb_sndctrlpipe(pegasus->usb, 0), (void *)req,
++                           pegasus->eth_regs, 3, async_ctrl_callback, req);
++
++      ret = usb_submit_urb(async_urb, GFP_ATOMIC);
++      if (ret) {
++              if (ret == -ENODEV)
++                      netif_device_detach(pegasus->net);
++              netif_err(pegasus, drv, pegasus->net,
++                        "%s returned %d\n", __func__, ret);
++      }
++      return ret;
++}
++
++static int __mii_op(pegasus_t *p, __u8 phy, __u8 indx, __u16 *regd, __u8 cmd)
++{
++      int i;
++      __u8 data[4] = { phy, 0, 0, indx };
++      __le16 regdi;
++      int ret = -ETIMEDOUT;
++
++      if (cmd & PHY_WRITE) {
++              __le16 *t = (__le16 *) & data[1];
++              *t = cpu_to_le16(*regd);
++      }
++      set_register(p, PhyCtrl, 0);
++      set_registers(p, PhyAddr, sizeof(data), data);
++      set_register(p, PhyCtrl, (indx | cmd));
++      for (i = 0; i < REG_TIMEOUT; i++) {
++              ret = get_registers(p, PhyCtrl, 1, data);
++              if (ret < 0)
++                      goto fail;
++              if (data[0] & PHY_DONE)
++                      break;
++      }
++      if (i >= REG_TIMEOUT)
++              goto fail;
++      if (cmd & PHY_READ) {
++              ret = get_registers(p, PhyData, 2, &regdi);
++              *regd = le16_to_cpu(regdi);
++              return ret;
++      }
++      return 0;
++fail:
++      netif_dbg(p, drv, p->net, "%s failed\n", __func__);
++      return ret;
++}
++
++/* Returns non-negative int on success, error on failure */
++static int read_mii_word(pegasus_t *pegasus, __u8 phy, __u8 indx, __u16 *regd)
++{
++      return __mii_op(pegasus, phy, indx, regd, PHY_READ);
++}
++
++/* Returns zero on success, error on failure */
++static int write_mii_word(pegasus_t *pegasus, __u8 phy, __u8 indx, __u16 *regd)
++{
++      return __mii_op(pegasus, phy, indx, regd, PHY_WRITE);
++}
++
++static int mdio_read(struct net_device *dev, int phy_id, int loc)
++{
++      pegasus_t *pegasus = netdev_priv(dev);
++      u16 res;
++
++      read_mii_word(pegasus, phy_id, loc, &res);
++      return (int)res;
++}
++
++static void mdio_write(struct net_device *dev, int phy_id, int loc, int val)
++{
++      pegasus_t *pegasus = netdev_priv(dev);
++      u16 data = val;
++
++      write_mii_word(pegasus, phy_id, loc, &data);
++}
++
++static int read_eprom_word(pegasus_t *pegasus, __u8 index, __u16 *retdata)
++{
++      int i;
++      __u8 tmp;
++      __le16 retdatai;
++      int ret;
++
++      set_register(pegasus, EpromCtrl, 0);
++      set_register(pegasus, EpromOffset, index);
++      set_register(pegasus, EpromCtrl, EPROM_READ);
++
++      for (i = 0; i < REG_TIMEOUT; i++) {
++              ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
++              if (tmp & EPROM_DONE)
++                      break;
++              if (ret == -ESHUTDOWN)
++                      goto fail;
++      }
++      if (i >= REG_TIMEOUT)
++              goto fail;
++
++      ret = get_registers(pegasus, EpromData, 2, &retdatai);
++      *retdata = le16_to_cpu(retdatai);
++      return ret;
++
++fail:
++      netif_warn(pegasus, drv, pegasus->net, "%s failed\n", __func__);
++      return -ETIMEDOUT;
++}
++
++#ifdef        PEGASUS_WRITE_EEPROM
++static inline void enable_eprom_write(pegasus_t *pegasus)
++{
++      __u8 tmp;
++
++      get_registers(pegasus, EthCtrl2, 1, &tmp);
++      set_register(pegasus, EthCtrl2, tmp | EPROM_WR_ENABLE);
++}
++
++static inline void disable_eprom_write(pegasus_t *pegasus)
++{
++      __u8 tmp;
++
++      get_registers(pegasus, EthCtrl2, 1, &tmp);
++      set_register(pegasus, EpromCtrl, 0);
++      set_register(pegasus, EthCtrl2, tmp & ~EPROM_WR_ENABLE);
++}
++
++static int write_eprom_word(pegasus_t *pegasus, __u8 index, __u16 data)
++{
++      int i;
++      __u8 tmp, d[4] = { 0x3f, 0, 0, EPROM_WRITE };
++      int ret;
++      __le16 le_data = cpu_to_le16(data);
++
++      set_registers(pegasus, EpromOffset, 4, d);
++      enable_eprom_write(pegasus);
++      set_register(pegasus, EpromOffset, index);
++      set_registers(pegasus, EpromData, 2, &le_data);
++      set_register(pegasus, EpromCtrl, EPROM_WRITE);
++
++      for (i = 0; i < REG_TIMEOUT; i++) {
++              ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
++              if (ret == -ESHUTDOWN)
++                      goto fail;
++              if (tmp & EPROM_DONE)
++                      break;
++      }
++      disable_eprom_write(pegasus);
++      if (i >= REG_TIMEOUT)
++              goto fail;
++
++      return ret;
++
++fail:
++      netif_warn(pegasus, drv, pegasus->net, "%s failed\n", __func__);
++      return -ETIMEDOUT;
++}
++#endif                                /* PEGASUS_WRITE_EEPROM */
++
++static inline void get_node_id(pegasus_t *pegasus, __u8 *id)
++{
++      int i;
++      __u16 w16;
++
++      for (i = 0; i < 3; i++) {
++              read_eprom_word(pegasus, i, &w16);
++              ((__le16 *) id)[i] = cpu_to_le16(w16);
++      }
++}
++
++static void set_ethernet_addr(pegasus_t *pegasus)
++{
++      __u8 node_id[6];
++
++      if (pegasus->features & PEGASUS_II) {
++              get_registers(pegasus, 0x10, sizeof(node_id), node_id);
++      } else {
++              get_node_id(pegasus, node_id);
++              set_registers(pegasus, EthID, sizeof(node_id), node_id);
++      }
++      memcpy(pegasus->net->dev_addr, node_id, sizeof(node_id));
++}
++
++static inline int reset_mac(pegasus_t *pegasus)
++{
++      __u8 data = 0x8;
++      int i;
++
++      set_register(pegasus, EthCtrl1, data);
++      for (i = 0; i < REG_TIMEOUT; i++) {
++              get_registers(pegasus, EthCtrl1, 1, &data);
++              if (~data & 0x08) {
++                      if (loopback)
++                              break;
++                      if (mii_mode && (pegasus->features & HAS_HOME_PNA))
++                              set_register(pegasus, Gpio1, 0x34);
++                      else
++                              set_register(pegasus, Gpio1, 0x26);
++                      set_register(pegasus, Gpio0, pegasus->features);
++                      set_register(pegasus, Gpio0, DEFAULT_GPIO_SET);
++                      break;
++              }
++      }
++      if (i == REG_TIMEOUT)
++              return -ETIMEDOUT;
++
++      if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS ||
++          usb_dev_id[pegasus->dev_index].vendor == VENDOR_DLINK) {
++              set_register(pegasus, Gpio0, 0x24);
++              set_register(pegasus, Gpio0, 0x26);
++      }
++      if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_ELCON) {
++              __u16 auxmode;
++              read_mii_word(pegasus, 3, 0x1b, &auxmode);
++              auxmode |= 4;
++              write_mii_word(pegasus, 3, 0x1b, &auxmode);
++      }
++
++      return 0;
++}
++
++static int enable_net_traffic(struct net_device *dev, struct usb_device *usb)
++{
++      __u16 linkpart;
++      __u8 data[4];
++      pegasus_t *pegasus = netdev_priv(dev);
++      int ret;
++
++      read_mii_word(pegasus, pegasus->phy, MII_LPA, &linkpart);
++      data[0] = 0xc9;
++      data[1] = 0;
++      if (linkpart & (ADVERTISE_100FULL | ADVERTISE_10FULL))
++              data[1] |= 0x20;        /* set full duplex */
++      if (linkpart & (ADVERTISE_100FULL | ADVERTISE_100HALF))
++              data[1] |= 0x10;        /* set 100 Mbps */
++      if (mii_mode)
++              data[1] = 0;
++      data[2] = loopback ? 0x09 : 0x01;
++
++      memcpy(pegasus->eth_regs, data, sizeof(data));
++      ret = set_registers(pegasus, EthCtrl0, 3, data);
++
++      if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS ||
++          usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS2 ||
++          usb_dev_id[pegasus->dev_index].vendor == VENDOR_DLINK) {
++              u16 auxmode;
++              read_mii_word(pegasus, 0, 0x1b, &auxmode);
++              auxmode |= 4;
++              write_mii_word(pegasus, 0, 0x1b, &auxmode);
++      }
++
++      return ret;
++}
++
++static void read_bulk_callback(struct urb *urb)
++{
++      pegasus_t *pegasus = urb->context;
++      struct net_device *net;
++      int rx_status, count = urb->actual_length;
++      int status = urb->status;
++      u8 *buf = urb->transfer_buffer;
++      __u16 pkt_len;
++
++      if (!pegasus)
++              return;
++
++      net = pegasus->net;
++      if (!netif_device_present(net) || !netif_running(net))
++              return;
++
++      switch (status) {
++      case 0:
++              break;
++      case -ETIME:
++              netif_dbg(pegasus, rx_err, net, "reset MAC\n");
++              pegasus->flags &= ~PEGASUS_RX_BUSY;
++              break;
++      case -EPIPE:            /* stall, or disconnect from TT */
++              /* FIXME schedule work to clear the halt */
++              netif_warn(pegasus, rx_err, net, "no rx stall recovery\n");
++              return;
++      case -ENOENT:
++      case -ECONNRESET:
++      case -ESHUTDOWN:
++              netif_dbg(pegasus, ifdown, net, "rx unlink, %d\n", status);
++              return;
++      default:
++              netif_dbg(pegasus, rx_err, net, "RX status %d\n", status);
++              goto goon;
++      }
++
++      if (!count || count < 4)
++              goto goon;
++
++      rx_status = buf[count - 2];
++      if (rx_status & 0x1e) {
++              netif_dbg(pegasus, rx_err, net,
++                        "RX packet error %x\n", rx_status);
++              pegasus->stats.rx_errors++;
++              if (rx_status & 0x06)   /* long or runt */
++                      pegasus->stats.rx_length_errors++;
++              if (rx_status & 0x08)
++                      pegasus->stats.rx_crc_errors++;
++              if (rx_status & 0x10)   /* extra bits   */
++                      pegasus->stats.rx_frame_errors++;
++              goto goon;
++      }
++      if (pegasus->chip == 0x8513) {
++              pkt_len = le32_to_cpu(*(__le32 *)urb->transfer_buffer);
++              pkt_len &= 0x0fff;
++              pegasus->rx_skb->data += 2;
++      } else {
++              pkt_len = buf[count - 3] << 8;
++              pkt_len += buf[count - 4];
++              pkt_len &= 0xfff;
++              pkt_len -= 8;
++      }
++
++      /*
++       * If the packet is unreasonably long, quietly drop it rather than
++       * kernel panicing by calling skb_put.
++       */
++      if (pkt_len > PEGASUS_MTU)
++              goto goon;
++
++      /*
++       * at this point we are sure pegasus->rx_skb != NULL
++       * so we go ahead and pass up the packet.
++       */
++      skb_put(pegasus->rx_skb, pkt_len);
++      pegasus->rx_skb->protocol = eth_type_trans(pegasus->rx_skb, net);
++      netif_rx(pegasus->rx_skb);
++      pegasus->stats.rx_packets++;
++      pegasus->stats.rx_bytes += pkt_len;
++
++      if (pegasus->flags & PEGASUS_UNPLUG)
++              return;
++
++      pegasus->rx_skb = __netdev_alloc_skb_ip_align(pegasus->net, PEGASUS_MTU,
++                                                    GFP_ATOMIC);
++
++      if (pegasus->rx_skb == NULL)
++              goto tl_sched;
++goon:
++      usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
++                        usb_rcvbulkpipe(pegasus->usb, 1),
++                        pegasus->rx_skb->data, PEGASUS_MTU + 8,
++                        read_bulk_callback, pegasus);
++      rx_status = usb_submit_urb(pegasus->rx_urb, GFP_ATOMIC);
++      if (rx_status == -ENODEV)
++              netif_device_detach(pegasus->net);
++      else if (rx_status) {
++              pegasus->flags |= PEGASUS_RX_URB_FAIL;
++              goto tl_sched;
++      } else {
++              pegasus->flags &= ~PEGASUS_RX_URB_FAIL;
++      }
++
++      return;
++
++tl_sched:
++      tasklet_schedule(&pegasus->rx_tl);
++}
++
++static void rx_fixup(unsigned long data)
++{
++      pegasus_t *pegasus;
++      int status;
++
++      pegasus = (pegasus_t *) data;
++      if (pegasus->flags & PEGASUS_UNPLUG)
++              return;
++
++      if (pegasus->flags & PEGASUS_RX_URB_FAIL)
++              if (pegasus->rx_skb)
++                      goto try_again;
++      if (pegasus->rx_skb == NULL)
++              pegasus->rx_skb = __netdev_alloc_skb_ip_align(pegasus->net,
++                                                            PEGASUS_MTU,
++                                                            GFP_ATOMIC);
++      if (pegasus->rx_skb == NULL) {
++              netif_warn(pegasus, rx_err, pegasus->net, "low on memory\n");
++              tasklet_schedule(&pegasus->rx_tl);
++              return;
++      }
++      usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
++                        usb_rcvbulkpipe(pegasus->usb, 1),
++                        pegasus->rx_skb->data, PEGASUS_MTU + 8,
++                        read_bulk_callback, pegasus);
++try_again:
++      status = usb_submit_urb(pegasus->rx_urb, GFP_ATOMIC);
++      if (status == -ENODEV)
++              netif_device_detach(pegasus->net);
++      else if (status) {
++              pegasus->flags |= PEGASUS_RX_URB_FAIL;
++              tasklet_schedule(&pegasus->rx_tl);
++      } else {
++              pegasus->flags &= ~PEGASUS_RX_URB_FAIL;
++      }
++}
++
++static void write_bulk_callback(struct urb *urb)
++{
++      pegasus_t *pegasus = urb->context;
++      struct net_device *net;
++      int status = urb->status;
++
++      if (!pegasus)
++              return;
++
++      net = pegasus->net;
++
++      if (!netif_device_present(net) || !netif_running(net))
++              return;
++
++      switch (status) {
++      case -EPIPE:
++              /* FIXME schedule_work() to clear the tx halt */
++              netif_stop_queue(net);
++              netif_warn(pegasus, tx_err, net, "no tx stall recovery\n");
++              return;
++      case -ENOENT:
++      case -ECONNRESET:
++      case -ESHUTDOWN:
++              netif_dbg(pegasus, ifdown, net, "tx unlink, %d\n", status);
++              return;
++      default:
++              netif_info(pegasus, tx_err, net, "TX status %d\n", status);
++              /* FALL THROUGH */
++      case 0:
++              break;
++      }
++
++      net->trans_start = jiffies; /* prevent tx timeout */
++      netif_wake_queue(net);
++}
++
++static void intr_callback(struct urb *urb)
++{
++      pegasus_t *pegasus = urb->context;
++      struct net_device *net;
++      int res, status = urb->status;
++
++      if (!pegasus)
++              return;
++      net = pegasus->net;
++
++      switch (status) {
++      case 0:
++              break;
++      case -ECONNRESET:       /* unlink */
++      case -ENOENT:
++      case -ESHUTDOWN:
++              return;
++      default:
++              /* some Pegasus-I products report LOTS of data
++               * toggle errors... avoid log spamming
++               */
++              netif_dbg(pegasus, timer, net, "intr status %d\n", status);
++      }
++
++      if (urb->actual_length >= 6) {
++              u8 *d = urb->transfer_buffer;
++
++              /* byte 0 == tx_status1, reg 2B */
++              if (d[0] & (TX_UNDERRUN|EXCESSIVE_COL
++                                      |LATE_COL|JABBER_TIMEOUT)) {
++                      pegasus->stats.tx_errors++;
++                      if (d[0] & TX_UNDERRUN)
++                              pegasus->stats.tx_fifo_errors++;
++                      if (d[0] & (EXCESSIVE_COL | JABBER_TIMEOUT))
++                              pegasus->stats.tx_aborted_errors++;
++                      if (d[0] & LATE_COL)
++                              pegasus->stats.tx_window_errors++;
++              }
++
++              /* d[5].LINK_STATUS lies on some adapters.
++               * d[0].NO_CARRIER kicks in only with failed TX.
++               * ... so monitoring with MII may be safest.
++               */
++
++              /* bytes 3-4 == rx_lostpkt, reg 2E/2F */
++              pegasus->stats.rx_missed_errors += ((d[3] & 0x7f) << 8) | d[4];
++      }
++
++      res = usb_submit_urb(urb, GFP_ATOMIC);
++      if (res == -ENODEV)
++              netif_device_detach(pegasus->net);
++      if (res)
++              netif_err(pegasus, timer, net,
++                        "can't resubmit interrupt urb, %d\n", res);
++}
++
++static void pegasus_tx_timeout(struct net_device *net)
++{
++      pegasus_t *pegasus = netdev_priv(net);
++      netif_warn(pegasus, timer, net, "tx timeout\n");
++      usb_unlink_urb(pegasus->tx_urb);
++      pegasus->stats.tx_errors++;
++}
++
++static netdev_tx_t pegasus_start_xmit(struct sk_buff *skb,
++                                          struct net_device *net)
++{
++      pegasus_t *pegasus = netdev_priv(net);
++      int count = ((skb->len + 2) & 0x3f) ? skb->len + 2 : skb->len + 3;
++      int res;
++      __u16 l16 = skb->len;
++
++      netif_stop_queue(net);
++
++      ((__le16 *) pegasus->tx_buff)[0] = cpu_to_le16(l16);
++      skb_copy_from_linear_data(skb, pegasus->tx_buff + 2, skb->len);
++      usb_fill_bulk_urb(pegasus->tx_urb, pegasus->usb,
++                        usb_sndbulkpipe(pegasus->usb, 2),
++                        pegasus->tx_buff, count,
++                        write_bulk_callback, pegasus);
++      if ((res = usb_submit_urb(pegasus->tx_urb, GFP_ATOMIC))) {
++              netif_warn(pegasus, tx_err, net, "fail tx, %d\n", res);
++              switch (res) {
++              case -EPIPE:            /* stall, or disconnect from TT */
++                      /* cleanup should already have been scheduled */
++                      break;
++              case -ENODEV:           /* disconnect() upcoming */
++              case -EPERM:
++                      netif_device_detach(pegasus->net);
++                      break;
++              default:
++                      pegasus->stats.tx_errors++;
++                      netif_start_queue(net);
++              }
++      } else {
++              pegasus->stats.tx_packets++;
++              pegasus->stats.tx_bytes += skb->len;
++      }
++      dev_kfree_skb(skb);
++
++      return NETDEV_TX_OK;
++}
++
++static struct net_device_stats *pegasus_netdev_stats(struct net_device *dev)
++{
++      return &((pegasus_t *) netdev_priv(dev))->stats;
++}
++
++static inline void disable_net_traffic(pegasus_t *pegasus)
++{
++      __le16 tmp = cpu_to_le16(0);
++
++      set_registers(pegasus, EthCtrl0, sizeof(tmp), &tmp);
++}
++
++static inline void get_interrupt_interval(pegasus_t *pegasus)
++{
++      u16 data;
++      u8 interval;
++
++      read_eprom_word(pegasus, 4, &data);
++      interval = data >> 8;
++      if (pegasus->usb->speed != USB_SPEED_HIGH) {
++              if (interval < 0x80) {
++                      netif_info(pegasus, timer, pegasus->net,
++                                 "intr interval changed from %ums to %ums\n",
++                                 interval, 0x80);
++                      interval = 0x80;
++                      data = (data & 0x00FF) | ((u16)interval << 8);
++#ifdef PEGASUS_WRITE_EEPROM
++                      write_eprom_word(pegasus, 4, data);
++#endif
++              }
++      }
++      pegasus->intr_interval = interval;
++}
++
++static void set_carrier(struct net_device *net)
++{
++      pegasus_t *pegasus = netdev_priv(net);
++      u16 tmp;
++
++      if (read_mii_word(pegasus, pegasus->phy, MII_BMSR, &tmp))
++              return;
++
++      if (tmp & BMSR_LSTATUS)
++              netif_carrier_on(net);
++      else
++              netif_carrier_off(net);
++}
++
++static void free_all_urbs(pegasus_t *pegasus)
++{
++      usb_free_urb(pegasus->intr_urb);
++      usb_free_urb(pegasus->tx_urb);
++      usb_free_urb(pegasus->rx_urb);
++}
++
++static void unlink_all_urbs(pegasus_t *pegasus)
++{
++      usb_kill_urb(pegasus->intr_urb);
++      usb_kill_urb(pegasus->tx_urb);
++      usb_kill_urb(pegasus->rx_urb);
++}
++
++static int alloc_urbs(pegasus_t *pegasus)
++{
++      int res = -ENOMEM;
++
++      pegasus->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
++      if (!pegasus->rx_urb) {
++              return res;
++      }
++      pegasus->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
++      if (!pegasus->tx_urb) {
++              usb_free_urb(pegasus->rx_urb);
++              return res;
++      }
++      pegasus->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
++      if (!pegasus->intr_urb) {
++              usb_free_urb(pegasus->tx_urb);
++              usb_free_urb(pegasus->rx_urb);
++              return res;
++      }
++
++      return 0;
++}
++
++static int pegasus_open(struct net_device *net)
++{
++      pegasus_t *pegasus = netdev_priv(net);
++      int res=-ENOMEM;
++
++      if (pegasus->rx_skb == NULL)
++              pegasus->rx_skb = __netdev_alloc_skb_ip_align(pegasus->net,
++                                                            PEGASUS_MTU,
++                                                            GFP_KERNEL);
++      if (!pegasus->rx_skb)
++              goto exit;
++
++      res = set_registers(pegasus, EthID, 6, net->dev_addr);
++
++      usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
++                        usb_rcvbulkpipe(pegasus->usb, 1),
++                        pegasus->rx_skb->data, PEGASUS_MTU + 8,
++                        read_bulk_callback, pegasus);
++      if ((res = usb_submit_urb(pegasus->rx_urb, GFP_KERNEL))) {
++              if (res == -ENODEV)
++                      netif_device_detach(pegasus->net);
++              netif_dbg(pegasus, ifup, net, "failed rx_urb, %d\n", res);
++              goto exit;
++      }
++
++      usb_fill_int_urb(pegasus->intr_urb, pegasus->usb,
++                       usb_rcvintpipe(pegasus->usb, 3),
++                       pegasus->intr_buff, sizeof(pegasus->intr_buff),
++                       intr_callback, pegasus, pegasus->intr_interval);
++      if ((res = usb_submit_urb(pegasus->intr_urb, GFP_KERNEL))) {
++              if (res == -ENODEV)
++                      netif_device_detach(pegasus->net);
++              netif_dbg(pegasus, ifup, net, "failed intr_urb, %d\n", res);
++              usb_kill_urb(pegasus->rx_urb);
++              goto exit;
++      }
++      res = enable_net_traffic(net, pegasus->usb);
++      if (res < 0) {
++              netif_dbg(pegasus, ifup, net,
++                        "can't enable_net_traffic() - %d\n", res);
++              res = -EIO;
++              usb_kill_urb(pegasus->rx_urb);
++              usb_kill_urb(pegasus->intr_urb);
++              goto exit;
++      }
++      set_carrier(net);
++      netif_start_queue(net);
++      netif_dbg(pegasus, ifup, net, "open\n");
++      res = 0;
++exit:
++      return res;
++}
++
++static int pegasus_close(struct net_device *net)
++{
++      pegasus_t *pegasus = netdev_priv(net);
++
++      netif_stop_queue(net);
++      if (!(pegasus->flags & PEGASUS_UNPLUG))
++              disable_net_traffic(pegasus);
++      tasklet_kill(&pegasus->rx_tl);
++      unlink_all_urbs(pegasus);
++
++      return 0;
++}
++
++static void pegasus_get_drvinfo(struct net_device *dev,
++                              struct ethtool_drvinfo *info)
++{
++      pegasus_t *pegasus = netdev_priv(dev);
++
++      strlcpy(info->driver, driver_name, sizeof(info->driver));
++      strlcpy(info->version, DRIVER_VERSION, sizeof(info->version));
++      usb_make_path(pegasus->usb, info->bus_info, sizeof(info->bus_info));
++}
++
++/* also handles three patterns of some kind in hardware */
++#define       WOL_SUPPORTED   (WAKE_MAGIC|WAKE_PHY)
++
++static void
++pegasus_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
++{
++      pegasus_t       *pegasus = netdev_priv(dev);
++
++      wol->supported = WAKE_MAGIC | WAKE_PHY;
++      wol->wolopts = pegasus->wolopts;
++}
++
++static int
++pegasus_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
++{
++      pegasus_t       *pegasus = netdev_priv(dev);
++      u8              reg78 = 0x04;
++      int             ret;
++
++      if (wol->wolopts & ~WOL_SUPPORTED)
++              return -EINVAL;
++
++      if (wol->wolopts & WAKE_MAGIC)
++              reg78 |= 0x80;
++      if (wol->wolopts & WAKE_PHY)
++              reg78 |= 0x40;
++      /* FIXME this 0x10 bit still needs to get set in the chip... */
++      if (wol->wolopts)
++              pegasus->eth_regs[0] |= 0x10;
++      else
++              pegasus->eth_regs[0] &= ~0x10;
++      pegasus->wolopts = wol->wolopts;
++
++      ret = set_register(pegasus, WakeupControl, reg78);
++      if (!ret)
++              ret = device_set_wakeup_enable(&pegasus->usb->dev,
++                                              wol->wolopts);
++      return ret;
++}
++
++static inline void pegasus_reset_wol(struct net_device *dev)
++{
++      struct ethtool_wolinfo wol;
++
++      memset(&wol, 0, sizeof wol);
++      (void) pegasus_set_wol(dev, &wol);
++}
++
++static int
++pegasus_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
++{
++      pegasus_t *pegasus;
++
++      pegasus = netdev_priv(dev);
++      mii_ethtool_gset(&pegasus->mii, ecmd);
++      return 0;
++}
++
++static int
++pegasus_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
++{
++      pegasus_t *pegasus = netdev_priv(dev);
++      return mii_ethtool_sset(&pegasus->mii, ecmd);
++}
++
++static int pegasus_nway_reset(struct net_device *dev)
++{
++      pegasus_t *pegasus = netdev_priv(dev);
++      return mii_nway_restart(&pegasus->mii);
++}
++
++static u32 pegasus_get_link(struct net_device *dev)
++{
++      pegasus_t *pegasus = netdev_priv(dev);
++      return mii_link_ok(&pegasus->mii);
++}
++
++static u32 pegasus_get_msglevel(struct net_device *dev)
++{
++      pegasus_t *pegasus = netdev_priv(dev);
++      return pegasus->msg_enable;
++}
++
++static void pegasus_set_msglevel(struct net_device *dev, u32 v)
++{
++      pegasus_t *pegasus = netdev_priv(dev);
++      pegasus->msg_enable = v;
++}
++
++static const struct ethtool_ops ops = {
++      .get_drvinfo = pegasus_get_drvinfo,
++      .get_settings = pegasus_get_settings,
++      .set_settings = pegasus_set_settings,
++      .nway_reset = pegasus_nway_reset,
++      .get_link = pegasus_get_link,
++      .get_msglevel = pegasus_get_msglevel,
++      .set_msglevel = pegasus_set_msglevel,
++      .get_wol = pegasus_get_wol,
++      .set_wol = pegasus_set_wol,
++};
++
++static int pegasus_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
++{
++      __u16 *data = (__u16 *) &rq->ifr_ifru;
++      pegasus_t *pegasus = netdev_priv(net);
++      int res;
++
++      switch (cmd) {
++      case SIOCDEVPRIVATE:
++              data[0] = pegasus->phy;
++      case SIOCDEVPRIVATE + 1:
++              read_mii_word(pegasus, data[0], data[1] & 0x1f, &data[3]);
++              res = 0;
++              break;
++      case SIOCDEVPRIVATE + 2:
++              if (!capable(CAP_NET_ADMIN))
++                      return -EPERM;
++              write_mii_word(pegasus, pegasus->phy, data[1] & 0x1f, &data[2]);
++              res = 0;
++              break;
++      default:
++              res = -EOPNOTSUPP;
++      }
++      return res;
++}
++
++static void pegasus_set_multicast(struct net_device *net)
++{
++      pegasus_t *pegasus = netdev_priv(net);
++
++      if (net->flags & IFF_PROMISC) {
++              pegasus->eth_regs[EthCtrl2] |= RX_PROMISCUOUS;
++              netif_info(pegasus, link, net, "Promiscuous mode enabled\n");
++      } else if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI)) {
++              pegasus->eth_regs[EthCtrl0] |= RX_MULTICAST;
++              pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
++              netif_dbg(pegasus, link, net, "set allmulti\n");
++      } else {
++              pegasus->eth_regs[EthCtrl0] &= ~RX_MULTICAST;
++              pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
++      }
++      update_eth_regs_async(pegasus);
++}
++
++static __u8 mii_phy_probe(pegasus_t *pegasus)
++{
++      int i;
++      __u16 tmp;
++
++      for (i = 0; i < 32; i++) {
++              read_mii_word(pegasus, i, MII_BMSR, &tmp);
++              if (tmp == 0 || tmp == 0xffff || (tmp & BMSR_MEDIA) == 0)
++                      continue;
++              else
++                      return i;
++      }
++
++      return 0xff;
++}
++
++static inline void setup_pegasus_II(pegasus_t *pegasus)
++{
++      __u8 data = 0xa5;
++
++      set_register(pegasus, Reg1d, 0);
++      set_register(pegasus, Reg7b, 1);
++      mdelay(100);
++      if ((pegasus->features & HAS_HOME_PNA) && mii_mode)
++              set_register(pegasus, Reg7b, 0);
++      else
++              set_register(pegasus, Reg7b, 2);
++
++      set_register(pegasus, 0x83, data);
++      get_registers(pegasus, 0x83, 1, &data);
++
++      if (data == 0xa5)
++              pegasus->chip = 0x8513;
++      else
++              pegasus->chip = 0;
++
++      set_register(pegasus, 0x80, 0xc0);
++      set_register(pegasus, 0x83, 0xff);
++      set_register(pegasus, 0x84, 0x01);
++
++      if (pegasus->features & HAS_HOME_PNA && mii_mode)
++              set_register(pegasus, Reg81, 6);
++      else
++              set_register(pegasus, Reg81, 2);
++}
++
++
++static int pegasus_count;
++static struct workqueue_struct *pegasus_workqueue;
++#define CARRIER_CHECK_DELAY (2 * HZ)
++
++static void check_carrier(struct work_struct *work)
++{
++      pegasus_t *pegasus = container_of(work, pegasus_t, carrier_check.work);
++      set_carrier(pegasus->net);
++      if (!(pegasus->flags & PEGASUS_UNPLUG)) {
++              queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
++                      CARRIER_CHECK_DELAY);
++      }
++}
++
++static int pegasus_blacklisted(struct usb_device *udev)
++{
++      struct usb_device_descriptor *udd = &udev->descriptor;
++
++      /* Special quirk to keep the driver from handling the Belkin Bluetooth
++       * dongle which happens to have the same ID.
++       */
++      if ((udd->idVendor == cpu_to_le16(VENDOR_BELKIN)) &&
++          (udd->idProduct == cpu_to_le16(0x0121)) &&
++          (udd->bDeviceClass == USB_CLASS_WIRELESS_CONTROLLER) &&
++          (udd->bDeviceProtocol == 1))
++              return 1;
++
++      return 0;
++}
++
++/* we rely on probe() and remove() being serialized so we
++ * don't need extra locking on pegasus_count.
++ */
++static void pegasus_dec_workqueue(void)
++{
++      pegasus_count--;
++      if (pegasus_count == 0) {
++              destroy_workqueue(pegasus_workqueue);
++              pegasus_workqueue = NULL;
++      }
++}
++
++static int pegasus_probe(struct usb_interface *intf,
++                       const struct usb_device_id *id)
++{
++      struct usb_device *dev = interface_to_usbdev(intf);
++      struct net_device *net;
++      pegasus_t *pegasus;
++      int dev_index = id - pegasus_ids;
++      int res = -ENOMEM;
++
++      if (pegasus_blacklisted(dev))
++              return -ENODEV;
++
++      if (pegasus_count == 0) {
++              pegasus_workqueue = create_singlethread_workqueue("pegasus");
++              if (!pegasus_workqueue)
++                      return -ENOMEM;
++      }
++      pegasus_count++;
++
++      net = alloc_etherdev(sizeof(struct pegasus));
++      if (!net)
++              goto out;
++
++      pegasus = netdev_priv(net);
++      pegasus->dev_index = dev_index;
++
++      res = alloc_urbs(pegasus);
++      if (res < 0) {
++              dev_err(&intf->dev, "can't allocate %s\n", "urbs");
++              goto out1;
++      }
++
++      tasklet_init(&pegasus->rx_tl, rx_fixup, (unsigned long) pegasus);
++
++      INIT_DELAYED_WORK(&pegasus->carrier_check, check_carrier);
++
++      pegasus->intf = intf;
++      pegasus->usb = dev;
++      pegasus->net = net;
++
++
++      net->watchdog_timeo = PEGASUS_TX_TIMEOUT;
++      net->netdev_ops = &pegasus_netdev_ops;
++      net->ethtool_ops = &ops;
++      pegasus->mii.dev = net;
++      pegasus->mii.mdio_read = mdio_read;
++      pegasus->mii.mdio_write = mdio_write;
++      pegasus->mii.phy_id_mask = 0x1f;
++      pegasus->mii.reg_num_mask = 0x1f;
++      pegasus->msg_enable = netif_msg_init(msg_level, NETIF_MSG_DRV
++                              | NETIF_MSG_PROBE | NETIF_MSG_LINK);
++
++      pegasus->features = usb_dev_id[dev_index].private;
++      get_interrupt_interval(pegasus);
++      if (reset_mac(pegasus)) {
++              dev_err(&intf->dev, "can't reset MAC\n");
++              res = -EIO;
++              goto out2;
++      }
++      set_ethernet_addr(pegasus);
++      if (pegasus->features & PEGASUS_II) {
++              dev_info(&intf->dev, "setup Pegasus II specific registers\n");
++              setup_pegasus_II(pegasus);
++      }
++      pegasus->phy = mii_phy_probe(pegasus);
++      if (pegasus->phy == 0xff) {
++              dev_warn(&intf->dev, "can't locate MII phy, using default\n");
++              pegasus->phy = 1;
++      }
++      pegasus->mii.phy_id = pegasus->phy;
++      usb_set_intfdata(intf, pegasus);
++      SET_NETDEV_DEV(net, &intf->dev);
++      pegasus_reset_wol(net);
++      res = register_netdev(net);
++      if (res)
++              goto out3;
++      queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
++                         CARRIER_CHECK_DELAY);
++      dev_info(&intf->dev, "%s, %s, %pM\n", net->name,
++               usb_dev_id[dev_index].name, net->dev_addr);
++      return 0;
++
++out3:
++      usb_set_intfdata(intf, NULL);
++out2:
++      free_all_urbs(pegasus);
++out1:
++      free_netdev(net);
++out:
++      pegasus_dec_workqueue();
++      return res;
++}
++
++static void pegasus_disconnect(struct usb_interface *intf)
++{
++      struct pegasus *pegasus = usb_get_intfdata(intf);
++
++      usb_set_intfdata(intf, NULL);
++      if (!pegasus) {
++              dev_dbg(&intf->dev, "unregistering non-bound device?\n");
++              return;
++      }
++
++      pegasus->flags |= PEGASUS_UNPLUG;
++      cancel_delayed_work(&pegasus->carrier_check);
++      unregister_netdev(pegasus->net);
++      unlink_all_urbs(pegasus);
++      free_all_urbs(pegasus);
++      if (pegasus->rx_skb != NULL) {
++              dev_kfree_skb(pegasus->rx_skb);
++              pegasus->rx_skb = NULL;
++      }
++      free_netdev(pegasus->net);
++      pegasus_dec_workqueue();
++}
++
++static int pegasus_suspend(struct usb_interface *intf, pm_message_t message)
++{
++      struct pegasus *pegasus = usb_get_intfdata(intf);
++
++      netif_device_detach(pegasus->net);
++      cancel_delayed_work(&pegasus->carrier_check);
++      if (netif_running(pegasus->net)) {
++              usb_kill_urb(pegasus->rx_urb);
++              usb_kill_urb(pegasus->intr_urb);
++      }
++      return 0;
++}
++
++static int pegasus_resume(struct usb_interface *intf)
++{
++      struct pegasus *pegasus = usb_get_intfdata(intf);
++
++      netif_device_attach(pegasus->net);
++      if (netif_running(pegasus->net)) {
++              pegasus->rx_urb->status = 0;
++              pegasus->rx_urb->actual_length = 0;
++              read_bulk_callback(pegasus->rx_urb);
++
++              pegasus->intr_urb->status = 0;
++              pegasus->intr_urb->actual_length = 0;
++              intr_callback(pegasus->intr_urb);
++      }
++      queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
++                              CARRIER_CHECK_DELAY);
++      return 0;
++}
++
++static const struct net_device_ops pegasus_netdev_ops = {
++      .ndo_open =                     pegasus_open,
++      .ndo_stop =                     pegasus_close,
++      .ndo_do_ioctl =                 pegasus_ioctl,
++      .ndo_start_xmit =               pegasus_start_xmit,
++      .ndo_set_rx_mode =              pegasus_set_multicast,
++      .ndo_get_stats =                pegasus_netdev_stats,
++      .ndo_tx_timeout =               pegasus_tx_timeout,
++      .ndo_change_mtu =               eth_change_mtu,
++      .ndo_set_mac_address =          eth_mac_addr,
++      .ndo_validate_addr =            eth_validate_addr,
++};
++
++static struct usb_driver pegasus_driver = {
++      .name = driver_name,
++      .probe = pegasus_probe,
++      .disconnect = pegasus_disconnect,
++      .id_table = pegasus_ids,
++      .suspend = pegasus_suspend,
++      .resume = pegasus_resume,
++      .disable_hub_initiated_lpm = 1,
++};
++
++static void __init parse_id(char *id)
++{
++      unsigned int vendor_id = 0, device_id = 0, flags = 0, i = 0;
++      char *token, *name = NULL;
++
++      if ((token = strsep(&id, ":")) != NULL)
++              name = token;
++      /* name now points to a null terminated string*/
++      if ((token = strsep(&id, ":")) != NULL)
++              vendor_id = simple_strtoul(token, NULL, 16);
++      if ((token = strsep(&id, ":")) != NULL)
++              device_id = simple_strtoul(token, NULL, 16);
++      flags = simple_strtoul(id, NULL, 16);
++      pr_info("%s: new device %s, vendor ID 0x%04x, device ID 0x%04x, flags: 0x%x\n",
++              driver_name, name, vendor_id, device_id, flags);
++
++      if (vendor_id > 0x10000 || vendor_id == 0)
++              return;
++      if (device_id > 0x10000 || device_id == 0)
++              return;
++
++      for (i = 0; usb_dev_id[i].name; i++);
++      usb_dev_id[i].name = name;
++      usb_dev_id[i].vendor = vendor_id;
++      usb_dev_id[i].device = device_id;
++      usb_dev_id[i].private = flags;
++      pegasus_ids[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
++      pegasus_ids[i].idVendor = vendor_id;
++      pegasus_ids[i].idProduct = device_id;
++}
++
++static int __init pegasus_init(void)
++{
++      pr_info("%s: %s, " DRIVER_DESC "\n", driver_name, DRIVER_VERSION);
++      if (devid)
++              parse_id(devid);
++      return usb_register(&pegasus_driver);
++}
++
++static void __exit pegasus_exit(void)
++{
++      usb_deregister(&pegasus_driver);
++}
++
++module_init(pegasus_init);
++module_exit(pegasus_exit);
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/pegasus.h backports-3.18.1-1/drivers/net/usb/pegasus.h
+--- backports-3.18.1-1.org/drivers/net/usb/pegasus.h   1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/pegasus.h       2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,308 @@
++/*
++ * Copyright (c) 1999-2013 Petko Manolov (petkan@nucleusys.com)
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++
++#ifndef       PEGASUS_DEV
++
++#define       PEGASUS_II              0x80000000
++#define       HAS_HOME_PNA            0x40000000
++
++#define       PEGASUS_MTU             1536
++
++#define       EPROM_WRITE             0x01
++#define       EPROM_READ              0x02
++#define       EPROM_DONE              0x04
++#define       EPROM_WR_ENABLE         0x10
++#define       EPROM_LOAD              0x20
++
++#define       PHY_DONE                0x80
++#define       PHY_READ                0x40
++#define       PHY_WRITE               0x20
++#define       DEFAULT_GPIO_RESET      0x24
++#define       DEFAULT_GPIO_SET        0x26
++
++#define       PEGASUS_PRESENT         0x00000001
++#define       PEGASUS_TX_BUSY         0x00000004
++#define       PEGASUS_RX_BUSY         0x00000008
++#define       CTRL_URB_RUNNING        0x00000010
++#define       CTRL_URB_SLEEP          0x00000020
++#define       PEGASUS_UNPLUG          0x00000040
++#define       PEGASUS_RX_URB_FAIL     0x00000080
++
++#define       RX_MULTICAST            2
++#define       RX_PROMISCUOUS          4
++
++#define       REG_TIMEOUT             (HZ)
++#define       PEGASUS_TX_TIMEOUT      (HZ*10)
++
++#define       TX_UNDERRUN             0x80
++#define       EXCESSIVE_COL           0x40
++#define       LATE_COL                0x20
++#define       NO_CARRIER              0x10
++#define       LOSS_CARRIER            0x08
++#define       JABBER_TIMEOUT          0x04
++
++#define       LINK_STATUS             0x01
++
++#define       PEGASUS_REQT_READ       0xc0
++#define       PEGASUS_REQT_WRITE      0x40
++#define       PEGASUS_REQ_GET_REGS    0xf0
++#define       PEGASUS_REQ_SET_REGS    0xf1
++#define       PEGASUS_REQ_SET_REG     PEGASUS_REQ_SET_REGS
++
++enum pegasus_registers {
++      EthCtrl0 = 0,
++      EthCtrl1 = 1,
++      EthCtrl2 = 2,
++      EthID = 0x10,
++      Reg1d = 0x1d,
++      EpromOffset = 0x20,
++      EpromData = 0x21,       /* 0x21 low, 0x22 high byte */
++      EpromCtrl = 0x23,
++      PhyAddr = 0x25,
++      PhyData = 0x26,         /* 0x26 low, 0x27 high byte */
++      PhyCtrl = 0x28,
++      UsbStst = 0x2a,
++      EthTxStat0 = 0x2b,
++      EthTxStat1 = 0x2c,
++      EthRxStat = 0x2d,
++      WakeupControl = 0x78,
++      Reg7b = 0x7b,
++      Gpio0 = 0x7e,
++      Gpio1 = 0x7f,
++      Reg81 = 0x81,
++};
++
++
++typedef struct pegasus {
++      struct usb_device       *usb;
++      struct usb_interface    *intf;
++      struct net_device       *net;
++      struct net_device_stats stats;
++      struct mii_if_info      mii;
++      unsigned                flags;
++      unsigned                features;
++      u32                     msg_enable;
++      u32                     wolopts;
++      int                     dev_index;
++      int                     intr_interval;
++      struct tasklet_struct   rx_tl;
++      struct delayed_work     carrier_check;
++      struct urb              *rx_urb, *tx_urb, *intr_urb;
++      struct sk_buff          *rx_skb;
++      int                     chip;
++      unsigned char           intr_buff[8];
++      __u8                    tx_buff[PEGASUS_MTU];
++      __u8                    eth_regs[4];
++      __u8                    phy;
++      __u8                    gpio_res;
++} pegasus_t;
++
++
++struct usb_eth_dev {
++      char    *name;
++      __u16   vendor;
++      __u16   device;
++      __u32   private; /* LSB is gpio reset value */
++};
++
++#define       VENDOR_3COM             0x0506
++#define       VENDOR_ABOCOM           0x07b8
++#define       VENDOR_ACCTON           0x083a
++#define       VENDOR_ADMTEK           0x07a6
++#define       VENDOR_AEILAB           0x3334
++#define       VENDOR_ALLIEDTEL        0x07c9
++#define       VENDOR_ATEN             0x0557
++#define       VENDOR_BELKIN           0x050d
++#define       VENDOR_BILLIONTON       0x08dd
++#define       VENDOR_COMPAQ           0x049f
++#define       VENDOR_COREGA           0x07aa
++#define       VENDOR_DLINK            0x2001
++#define       VENDOR_ELCON            0x0db7
++#define       VENDOR_ELECOM           0x056e
++#define       VENDOR_ELSA             0x05cc
++#define       VENDOR_GIGABYTE         0x1044
++#define       VENDOR_HAWKING          0x0e66
++#define       VENDOR_HP               0x03f0
++#define       VENDOR_IODATA           0x04bb
++#define       VENDOR_KINGSTON         0x0951
++#define       VENDOR_LANEED           0x056e
++#define       VENDOR_LINKSYS          0x066b
++#define       VENDOR_LINKSYS2         0x077b
++#define       VENDOR_MELCO            0x0411
++#define       VENDOR_MICROSOFT        0x045e
++#define       VENDOR_MOBILITY         0x1342
++#define       VENDOR_NETGEAR          0x0846
++#define       VENDOR_OCT              0x0b39
++#define       VENDOR_SMARTBRIDGES     0x08d1
++#define       VENDOR_SMC              0x0707
++#define       VENDOR_SOHOWARE         0x15e8
++#define       VENDOR_SIEMENS          0x067c
++
++
++#else /* PEGASUS_DEV */
++
++PEGASUS_DEV("3Com USB Ethernet 3C460B", VENDOR_3COM, 0x4601,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("ATEN USB Ethernet UC-110T", VENDOR_ATEN, 0x2007,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x110c,
++              DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA)
++PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4104,
++              DEFAULT_GPIO_RESET | HAS_HOME_PNA)
++PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4004,
++              DEFAULT_GPIO_RESET | HAS_HOME_PNA)
++PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4007,
++              DEFAULT_GPIO_RESET | HAS_HOME_PNA)
++PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4102,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4002,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400b,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400c,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0xabc1,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x200c,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("Philips USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("ADMtek ADM8511 \"Pegasus II\" USB Ethernet",
++              VENDOR_ADMTEK, 0x8511,
++              DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA)
++PEGASUS_DEV("ADMtek ADM8513 \"Pegasus II\" USB Ethernet",
++              VENDOR_ADMTEK, 0x8513,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("ADMtek ADM8515 \"Pegasus II\" USB-2.0 Ethernet",
++              VENDOR_ADMTEK, 0x8515,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("ADMtek AN986 \"Pegasus\" USB Ethernet (evaluation board)",
++              VENDOR_ADMTEK, 0x0986,
++              DEFAULT_GPIO_RESET | HAS_HOME_PNA)
++PEGASUS_DEV("AN986A USB MAC", VENDOR_ADMTEK, 1986,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++/*
++ * Distinguish between this Belkin adaptor and the Belkin bluetooth adaptors
++ * with the same product IDs by checking the device class too.
++ */
++PEGASUS_DEV_CLASS("Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, 0x00,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("Belkin F5U122 10/100 USB Ethernet", VENDOR_BELKIN, 0x0122,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("Billionton USB-100", VENDOR_BILLIONTON, 0x0986,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987,
++              DEFAULT_GPIO_RESET | HAS_HOME_PNA)
++PEGASUS_DEV("iPAQ Networking 10/100 USB", VENDOR_COMPAQ, 0x8511,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("Billionton USBEL-100", VENDOR_BILLIONTON, 0x0988,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("Billionton USBE-100", VENDOR_BILLIONTON, 0x8511,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("Corega FEther USB-TX", VENDOR_COREGA, 0x0004,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("Corega FEther USB-TXS", VENDOR_COREGA, 0x000d,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x4001,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x4002,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x4102,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x400b,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x200c,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("D-Link DSB-650TX(PNA)", VENDOR_DLINK, 0x4003,
++              DEFAULT_GPIO_RESET | HAS_HOME_PNA)
++PEGASUS_DEV("D-Link DSB-650", VENDOR_DLINK, 0xabc1,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002,
++              DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA)
++PEGASUS_DEV("ELECOM USB Ethernet LD-USB20", VENDOR_ELECOM,  0x4010,
++              DEFAULT_GPIO_RESET  | PEGASUS_II)
++PEGASUS_DEV("EasiDock Ethernet", VENDOR_MOBILITY, 0x0304,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("GIGABYTE GN-BR402W Wireless Router", VENDOR_GIGABYTE, 0x8002,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("HP hn210c Ethernet USB", VENDOR_HP, 0x811c,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("IO DATA USB ET/TX", VENDOR_IODATA, 0x0904,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("IO DATA USB ETX-US2", VENDOR_IODATA, 0x093a,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("LANEED USB Ethernet LD-USBL/TX", VENDOR_LANEED, 0x4005,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x400b,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("LANEED USB Ethernet LD-USB/T", VENDOR_LANEED, 0xabc1,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x200c,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("Linksys USB10TX", VENDOR_LINKSYS, 0x2202,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("Linksys USB100TX", VENDOR_LINKSYS, 0x2203,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("Linksys USB100TX", VENDOR_LINKSYS, 0x2204,
++              DEFAULT_GPIO_RESET | HAS_HOME_PNA)
++PEGASUS_DEV("Linksys USB10T Ethernet Adapter", VENDOR_LINKSYS, 0x2206,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("Linksys USBVPN1", VENDOR_LINKSYS2, 0x08b4,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("Linksys USB USB100TX", VENDOR_LINKSYS, 0x400b,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("Linksys USB10TX", VENDOR_LINKSYS, 0x200c,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0001,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0005,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("MELCO/BUFFALO LUA2-TX", VENDOR_MELCO, 0x0009,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("Microsoft MN-110", VENDOR_MICROSOFT, 0x007a,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("NETGEAR FA101", VENDOR_NETGEAR, 0x1020,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("OCT Inc.", VENDOR_OCT, 0x0109,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("OCT USB TO Ethernet", VENDOR_OCT, 0x0901,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("smartNIC 2 PnP Adapter", VENDOR_SMARTBRIDGES, 0x0003,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("SMC 202 USB Ethernet", VENDOR_SMC, 0x0200,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("SMC 2206 USB Ethernet", VENDOR_SMC, 0x0201,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("SOHOware NUB100 Ethernet", VENDOR_SOHOWARE, 0x9100,
++              DEFAULT_GPIO_RESET)
++PEGASUS_DEV("SOHOware NUB110 Ethernet", VENDOR_SOHOWARE, 0x9110,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++PEGASUS_DEV("SpeedStream USB 10/100 Ethernet", VENDOR_SIEMENS, 0x1001,
++              DEFAULT_GPIO_RESET | PEGASUS_II)
++
++
++#endif        /* PEGASUS_DEV */
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/plusb.c backports-3.18.1-1/drivers/net/usb/plusb.c
+--- backports-3.18.1-1.org/drivers/net/usb/plusb.c     1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/plusb.c 2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,157 @@
++/*
++ * PL-2301/2302 USB host-to-host link cables
++ * Copyright (C) 2000-2005 by David Brownell
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ */
++
++// #define    DEBUG                   // error path messages, extra info
++// #define    VERBOSE                 // more; success messages
++
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/workqueue.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/usb/usbnet.h>
++
++
++/*
++ * Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/ 
++ *
++ * The protocol and handshaking used here should be bug-compatible
++ * with the Linux 2.2 "plusb" driver, by Deti Fliegl.
++ *
++ * HEADS UP:  this handshaking isn't all that robust.  This driver
++ * gets confused easily if you unplug one end of the cable then
++ * try to connect it again; you'll need to restart both ends. The
++ * "naplink" software (used by some PlayStation/2 deveopers) does
++ * the handshaking much better!   Also, sometimes this hardware
++ * seems to get wedged under load.  Prolific docs are weak, and
++ * don't identify differences between PL2301 and PL2302, much less
++ * anything to explain the different PL2302 versions observed.
++ *
++ * NOTE:  pl2501 has several modes, including pl2301 and pl2302
++ * compatibility.   Some docs suggest the difference between 2301
++ * and 2302 is only to make MS-Windows use a different driver...
++ *
++ * pl25a1 glue based on patch from Tony Gibbs.  Prolific "docs" on
++ * this chip are as usual incomplete about what control messages
++ * are supported.
++ */
++
++/*
++ * Bits 0-4 can be used for software handshaking; they're set from
++ * one end, cleared from the other, "read" with the interrupt byte.
++ */
++#define       PL_S_EN         (1<<7)          /* (feature only) suspend enable */
++/* reserved bit -- rx ready (6) ? */
++#define       PL_TX_READY     (1<<5)          /* (interrupt only) transmit ready */
++#define       PL_RESET_OUT    (1<<4)          /* reset output pipe */
++#define       PL_RESET_IN     (1<<3)          /* reset input pipe */
++#define       PL_TX_C         (1<<2)          /* transmission complete */
++#define       PL_TX_REQ       (1<<1)          /* transmission received */
++#define       PL_PEER_E       (1<<0)          /* peer exists */
++
++static inline int
++pl_vendor_req(struct usbnet *dev, u8 req, u8 val, u8 index)
++{
++      return usbnet_read_cmd(dev, req,
++                              USB_DIR_IN | USB_TYPE_VENDOR |
++                              USB_RECIP_DEVICE,
++                              val, index, NULL, 0);
++}
++
++static inline int
++pl_clear_QuickLink_features(struct usbnet *dev, int val)
++{
++      return pl_vendor_req(dev, 1, (u8) val, 0);
++}
++
++static inline int
++pl_set_QuickLink_features(struct usbnet *dev, int val)
++{
++      return pl_vendor_req(dev, 3, (u8) val, 0);
++}
++
++static int pl_reset(struct usbnet *dev)
++{
++      int status;
++
++      /* some units seem to need this reset, others reject it utterly.
++       * FIXME be more like "naplink" or windows drivers.
++       */
++      status = pl_set_QuickLink_features(dev,
++              PL_S_EN|PL_RESET_OUT|PL_RESET_IN|PL_PEER_E);
++      if (status != 0 && netif_msg_probe(dev))
++              netif_dbg(dev, link, dev->net, "pl_reset --> %d\n", status);
++      return 0;
++}
++
++static const struct driver_info       prolific_info = {
++      .description =  "Prolific PL-2301/PL-2302/PL-25A1",
++      .flags =        FLAG_POINTTOPOINT | FLAG_NO_SETINT,
++              /* some PL-2302 versions seem to fail usb_set_interface() */
++      .reset =        pl_reset,
++};
++
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * Proilific's name won't normally be on the cables, and
++ * may not be on the device.
++ */
++
++static const struct usb_device_id     products [] = {
++
++/* full speed cables */
++{
++      USB_DEVICE(0x067b, 0x0000),     // PL-2301
++      .driver_info =  (unsigned long) &prolific_info,
++}, {
++      USB_DEVICE(0x067b, 0x0001),     // PL-2302
++      .driver_info =  (unsigned long) &prolific_info,
++},
++
++/* high speed cables */
++{
++      USB_DEVICE(0x067b, 0x25a1),     /* PL-25A1, no eeprom */
++      .driver_info =  (unsigned long) &prolific_info,
++}, {
++      USB_DEVICE(0x050d, 0x258a),     /* Belkin F5U258/F5U279 (PL-25A1) */
++      .driver_info =  (unsigned long) &prolific_info,
++},
++
++      { },            // END
++};
++MODULE_DEVICE_TABLE(usb, products);
++
++static struct usb_driver plusb_driver = {
++      .name =         "plusb",
++      .id_table =     products,
++      .probe =        usbnet_probe,
++      .disconnect =   usbnet_disconnect,
++      .suspend =      usbnet_suspend,
++      .resume =       usbnet_resume,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(plusb_driver);
++
++MODULE_AUTHOR("David Brownell");
++MODULE_DESCRIPTION("Prolific PL-2301/2302/25A1 USB Host to Host Link Driver");
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/r8152.c backports-3.18.1-1/drivers/net/usb/r8152.c
+--- backports-3.18.1-1.org/drivers/net/usb/r8152.c     1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/r8152.c 2015-01-03 13:42:25.000000000 +0100
+@@ -0,0 +1,3913 @@
++/*
++ *  Copyright (c) 2014 Realtek Semiconductor Corp. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/signal.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/mii.h>
++#include <linux/ethtool.h>
++#include <linux/usb.h>
++#include <linux/crc32.h>
++#include <linux/if_vlan.h>
++#include <linux/uaccess.h>
++#include <linux/list.h>
++#include <linux/ip.h>
++#include <linux/ipv6.h>
++#include <net/ip6_checksum.h>
++#include <uapi/linux/mdio.h>
++#include <linux/mdio.h>
++
++/* Version Information */
++#define DRIVER_VERSION "v1.07.0 (2014/10/09)"
++#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
++#define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
++#define MODULENAME "r8152"
++
++#define R8152_PHY_ID          32
++
++#define PLA_IDR                       0xc000
++#define PLA_RCR                       0xc010
++#define PLA_RMS                       0xc016
++#define PLA_RXFIFO_CTRL0      0xc0a0
++#define PLA_RXFIFO_CTRL1      0xc0a4
++#define PLA_RXFIFO_CTRL2      0xc0a8
++#define PLA_FMC                       0xc0b4
++#define PLA_CFG_WOL           0xc0b6
++#define PLA_TEREDO_CFG                0xc0bc
++#define PLA_MAR                       0xcd00
++#define PLA_BACKUP            0xd000
++#define PAL_BDC_CR            0xd1a0
++#define PLA_TEREDO_TIMER      0xd2cc
++#define PLA_REALWOW_TIMER     0xd2e8
++#define PLA_LEDSEL            0xdd90
++#define PLA_LED_FEATURE               0xdd92
++#define PLA_PHYAR             0xde00
++#define PLA_BOOT_CTRL         0xe004
++#define PLA_GPHY_INTR_IMR     0xe022
++#define PLA_EEE_CR            0xe040
++#define PLA_EEEP_CR           0xe080
++#define PLA_MAC_PWR_CTRL      0xe0c0
++#define PLA_MAC_PWR_CTRL2     0xe0ca
++#define PLA_MAC_PWR_CTRL3     0xe0cc
++#define PLA_MAC_PWR_CTRL4     0xe0ce
++#define PLA_WDT6_CTRL         0xe428
++#define PLA_TCR0              0xe610
++#define PLA_TCR1              0xe612
++#define PLA_MTPS              0xe615
++#define PLA_TXFIFO_CTRL               0xe618
++#define PLA_RSTTALLY          0xe800
++#define PLA_CR                        0xe813
++#define PLA_CRWECR            0xe81c
++#define PLA_CONFIG12          0xe81e  /* CONFIG1, CONFIG2 */
++#define PLA_CONFIG34          0xe820  /* CONFIG3, CONFIG4 */
++#define PLA_CONFIG5           0xe822
++#define PLA_PHY_PWR           0xe84c
++#define PLA_OOB_CTRL          0xe84f
++#define PLA_CPCR              0xe854
++#define PLA_MISC_0            0xe858
++#define PLA_MISC_1            0xe85a
++#define PLA_OCP_GPHY_BASE     0xe86c
++#define PLA_TALLYCNT          0xe890
++#define PLA_SFF_STS_7         0xe8de
++#define PLA_PHYSTATUS         0xe908
++#define PLA_BP_BA             0xfc26
++#define PLA_BP_0              0xfc28
++#define PLA_BP_1              0xfc2a
++#define PLA_BP_2              0xfc2c
++#define PLA_BP_3              0xfc2e
++#define PLA_BP_4              0xfc30
++#define PLA_BP_5              0xfc32
++#define PLA_BP_6              0xfc34
++#define PLA_BP_7              0xfc36
++#define PLA_BP_EN             0xfc38
++
++#define USB_U2P3_CTRL         0xb460
++#define USB_DEV_STAT          0xb808
++#define USB_USB_CTRL          0xd406
++#define USB_PHY_CTRL          0xd408
++#define USB_TX_AGG            0xd40a
++#define USB_RX_BUF_TH         0xd40c
++#define USB_USB_TIMER         0xd428
++#define USB_RX_EARLY_AGG      0xd42c
++#define USB_PM_CTRL_STATUS    0xd432
++#define USB_TX_DMA            0xd434
++#define USB_TOLERANCE         0xd490
++#define USB_LPM_CTRL          0xd41a
++#define USB_UPS_CTRL          0xd800
++#define USB_MISC_0            0xd81a
++#define USB_POWER_CUT         0xd80a
++#define USB_AFE_CTRL2         0xd824
++#define USB_WDT11_CTRL                0xe43c
++#define USB_BP_BA             0xfc26
++#define USB_BP_0              0xfc28
++#define USB_BP_1              0xfc2a
++#define USB_BP_2              0xfc2c
++#define USB_BP_3              0xfc2e
++#define USB_BP_4              0xfc30
++#define USB_BP_5              0xfc32
++#define USB_BP_6              0xfc34
++#define USB_BP_7              0xfc36
++#define USB_BP_EN             0xfc38
++
++/* OCP Registers */
++#define OCP_ALDPS_CONFIG      0x2010
++#define OCP_EEE_CONFIG1               0x2080
++#define OCP_EEE_CONFIG2               0x2092
++#define OCP_EEE_CONFIG3               0x2094
++#define OCP_BASE_MII          0xa400
++#define OCP_EEE_AR            0xa41a
++#define OCP_EEE_DATA          0xa41c
++#define OCP_PHY_STATUS                0xa420
++#define OCP_POWER_CFG         0xa430
++#define OCP_EEE_CFG           0xa432
++#define OCP_SRAM_ADDR         0xa436
++#define OCP_SRAM_DATA         0xa438
++#define OCP_DOWN_SPEED                0xa442
++#define OCP_EEE_ABLE          0xa5c4
++#define OCP_EEE_ADV           0xa5d0
++#define OCP_EEE_LPABLE                0xa5d2
++#define OCP_ADC_CFG           0xbc06
++
++/* SRAM Register */
++#define SRAM_LPF_CFG          0x8012
++#define SRAM_10M_AMP1         0x8080
++#define SRAM_10M_AMP2         0x8082
++#define SRAM_IMPEDANCE                0x8084
++
++/* PLA_RCR */
++#define RCR_AAP                       0x00000001
++#define RCR_APM                       0x00000002
++#define RCR_AM                        0x00000004
++#define RCR_AB                        0x00000008
++#define RCR_ACPT_ALL          (RCR_AAP | RCR_APM | RCR_AM | RCR_AB)
++
++/* PLA_RXFIFO_CTRL0 */
++#define RXFIFO_THR1_NORMAL    0x00080002
++#define RXFIFO_THR1_OOB               0x01800003
++
++/* PLA_RXFIFO_CTRL1 */
++#define RXFIFO_THR2_FULL      0x00000060
++#define RXFIFO_THR2_HIGH      0x00000038
++#define RXFIFO_THR2_OOB               0x0000004a
++#define RXFIFO_THR2_NORMAL    0x00a0
++
++/* PLA_RXFIFO_CTRL2 */
++#define RXFIFO_THR3_FULL      0x00000078
++#define RXFIFO_THR3_HIGH      0x00000048
++#define RXFIFO_THR3_OOB               0x0000005a
++#define RXFIFO_THR3_NORMAL    0x0110
++
++/* PLA_TXFIFO_CTRL */
++#define TXFIFO_THR_NORMAL     0x00400008
++#define TXFIFO_THR_NORMAL2    0x01000008
++
++/* PLA_FMC */
++#define FMC_FCR_MCU_EN                0x0001
++
++/* PLA_EEEP_CR */
++#define EEEP_CR_EEEP_TX               0x0002
++
++/* PLA_WDT6_CTRL */
++#define WDT6_SET_MODE         0x0010
++
++/* PLA_TCR0 */
++#define TCR0_TX_EMPTY         0x0800
++#define TCR0_AUTO_FIFO                0x0080
++
++/* PLA_TCR1 */
++#define VERSION_MASK          0x7cf0
++
++/* PLA_MTPS */
++#define MTPS_JUMBO            (12 * 1024 / 64)
++#define MTPS_DEFAULT          (6 * 1024 / 64)
++
++/* PLA_RSTTALLY */
++#define TALLY_RESET           0x0001
++
++/* PLA_CR */
++#define CR_RST                        0x10
++#define CR_RE                 0x08
++#define CR_TE                 0x04
++
++/* PLA_CRWECR */
++#define CRWECR_NORAML         0x00
++#define CRWECR_CONFIG         0xc0
++
++/* PLA_OOB_CTRL */
++#define NOW_IS_OOB            0x80
++#define TXFIFO_EMPTY          0x20
++#define RXFIFO_EMPTY          0x10
++#define LINK_LIST_READY               0x02
++#define DIS_MCU_CLROOB                0x01
++#define FIFO_EMPTY            (TXFIFO_EMPTY | RXFIFO_EMPTY)
++
++/* PLA_MISC_1 */
++#define RXDY_GATED_EN         0x0008
++
++/* PLA_SFF_STS_7 */
++#define RE_INIT_LL            0x8000
++#define MCU_BORW_EN           0x4000
++
++/* PLA_CPCR */
++#define CPCR_RX_VLAN          0x0040
++
++/* PLA_CFG_WOL */
++#define MAGIC_EN              0x0001
++
++/* PLA_TEREDO_CFG */
++#define TEREDO_SEL            0x8000
++#define TEREDO_WAKE_MASK      0x7f00
++#define TEREDO_RS_EVENT_MASK  0x00fe
++#define OOB_TEREDO_EN         0x0001
++
++/* PAL_BDC_CR */
++#define ALDPS_PROXY_MODE      0x0001
++
++/* PLA_CONFIG34 */
++#define LINK_ON_WAKE_EN               0x0010
++#define LINK_OFF_WAKE_EN      0x0008
++
++/* PLA_CONFIG5 */
++#define BWF_EN                        0x0040
++#define MWF_EN                        0x0020
++#define UWF_EN                        0x0010
++#define LAN_WAKE_EN           0x0002
++
++/* PLA_LED_FEATURE */
++#define LED_MODE_MASK         0x0700
++
++/* PLA_PHY_PWR */
++#define TX_10M_IDLE_EN                0x0080
++#define PFM_PWM_SWITCH                0x0040
++
++/* PLA_MAC_PWR_CTRL */
++#define D3_CLK_GATED_EN               0x00004000
++#define MCU_CLK_RATIO         0x07010f07
++#define MCU_CLK_RATIO_MASK    0x0f0f0f0f
++#define ALDPS_SPDWN_RATIO     0x0f87
++
++/* PLA_MAC_PWR_CTRL2 */
++#define EEE_SPDWN_RATIO               0x8007
++
++/* PLA_MAC_PWR_CTRL3 */
++#define PKT_AVAIL_SPDWN_EN    0x0100
++#define SUSPEND_SPDWN_EN      0x0004
++#define U1U2_SPDWN_EN         0x0002
++#define L1_SPDWN_EN           0x0001
++
++/* PLA_MAC_PWR_CTRL4 */
++#define PWRSAVE_SPDWN_EN      0x1000
++#define RXDV_SPDWN_EN         0x0800
++#define TX10MIDLE_EN          0x0100
++#define TP100_SPDWN_EN                0x0020
++#define TP500_SPDWN_EN                0x0010
++#define TP1000_SPDWN_EN               0x0008
++#define EEE_SPDWN_EN          0x0001
++
++/* PLA_GPHY_INTR_IMR */
++#define GPHY_STS_MSK          0x0001
++#define SPEED_DOWN_MSK                0x0002
++#define SPDWN_RXDV_MSK                0x0004
++#define SPDWN_LINKCHG_MSK     0x0008
++
++/* PLA_PHYAR */
++#define PHYAR_FLAG            0x80000000
++
++/* PLA_EEE_CR */
++#define EEE_RX_EN             0x0001
++#define EEE_TX_EN             0x0002
++
++/* PLA_BOOT_CTRL */
++#define AUTOLOAD_DONE         0x0002
++
++/* USB_DEV_STAT */
++#define STAT_SPEED_MASK               0x0006
++#define STAT_SPEED_HIGH               0x0000
++#define STAT_SPEED_FULL               0x0002
++
++/* USB_TX_AGG */
++#define TX_AGG_MAX_THRESHOLD  0x03
++
++/* USB_RX_BUF_TH */
++#define RX_THR_SUPPER         0x0c350180
++#define RX_THR_HIGH           0x7a120180
++#define RX_THR_SLOW           0xffff0180
++
++/* USB_TX_DMA */
++#define TEST_MODE_DISABLE     0x00000001
++#define TX_SIZE_ADJUST1               0x00000100
++
++/* USB_UPS_CTRL */
++#define POWER_CUT             0x0100
++
++/* USB_PM_CTRL_STATUS */
++#define RESUME_INDICATE               0x0001
++
++/* USB_USB_CTRL */
++#define RX_AGG_DISABLE                0x0010
++
++/* USB_U2P3_CTRL */
++#define U2P3_ENABLE           0x0001
++
++/* USB_POWER_CUT */
++#define PWR_EN                        0x0001
++#define PHASE2_EN             0x0008
++
++/* USB_MISC_0 */
++#define PCUT_STATUS           0x0001
++
++/* USB_RX_EARLY_AGG */
++#define EARLY_AGG_SUPPER      0x0e832981
++#define EARLY_AGG_HIGH                0x0e837a12
++#define EARLY_AGG_SLOW                0x0e83ffff
++
++/* USB_WDT11_CTRL */
++#define TIMER11_EN            0x0001
++
++/* USB_LPM_CTRL */
++#define LPM_TIMER_MASK                0x0c
++#define LPM_TIMER_500MS               0x04    /* 500 ms */
++#define LPM_TIMER_500US               0x0c    /* 500 us */
++
++/* USB_AFE_CTRL2 */
++#define SEN_VAL_MASK          0xf800
++#define SEN_VAL_NORMAL                0xa000
++#define SEL_RXIDLE            0x0100
++
++/* OCP_ALDPS_CONFIG */
++#define ENPWRSAVE             0x8000
++#define ENPDNPS                       0x0200
++#define LINKENA                       0x0100
++#define DIS_SDSAVE            0x0010
++
++/* OCP_PHY_STATUS */
++#define PHY_STAT_MASK         0x0007
++#define PHY_STAT_LAN_ON               3
++#define PHY_STAT_PWRDN                5
++
++/* OCP_POWER_CFG */
++#define EEE_CLKDIV_EN         0x8000
++#define EN_ALDPS              0x0004
++#define EN_10M_PLLOFF         0x0001
++
++/* OCP_EEE_CONFIG1 */
++#define RG_TXLPI_MSK_HFDUP    0x8000
++#define RG_MATCLR_EN          0x4000
++#define EEE_10_CAP            0x2000
++#define EEE_NWAY_EN           0x1000
++#define TX_QUIET_EN           0x0200
++#define RX_QUIET_EN           0x0100
++#define sd_rise_time_mask     0x0070
++#define sd_rise_time(x)               (min(x, 7) << 4)        /* bit 4 ~ 6 */
++#define RG_RXLPI_MSK_HFDUP    0x0008
++#define SDFALLTIME            0x0007  /* bit 0 ~ 2 */
++
++/* OCP_EEE_CONFIG2 */
++#define RG_LPIHYS_NUM         0x7000  /* bit 12 ~ 15 */
++#define RG_DACQUIET_EN                0x0400
++#define RG_LDVQUIET_EN                0x0200
++#define RG_CKRSEL             0x0020
++#define RG_EEEPRG_EN          0x0010
++
++/* OCP_EEE_CONFIG3 */
++#define fast_snr_mask         0xff80
++#define fast_snr(x)           (min(x, 0x1ff) << 7)    /* bit 7 ~ 15 */
++#define RG_LFS_SEL            0x0060  /* bit 6 ~ 5 */
++#define MSK_PH                        0x0006  /* bit 0 ~ 3 */
++
++/* OCP_EEE_AR */
++/* bit[15:14] function */
++#define FUN_ADDR              0x0000
++#define FUN_DATA              0x4000
++/* bit[4:0] device addr */
++
++/* OCP_EEE_CFG */
++#define CTAP_SHORT_EN         0x0040
++#define EEE10_EN              0x0010
++
++/* OCP_DOWN_SPEED */
++#define EN_10M_BGOFF          0x0080
++
++/* OCP_ADC_CFG */
++#define CKADSEL_L             0x0100
++#define ADC_EN                        0x0080
++#define EN_EMI_L              0x0040
++
++/* SRAM_LPF_CFG */
++#define LPF_AUTO_TUNE         0x8000
++
++/* SRAM_10M_AMP1 */
++#define GDAC_IB_UPALL         0x0008
++
++/* SRAM_10M_AMP2 */
++#define AMP_DN                        0x0200
++
++/* SRAM_IMPEDANCE */
++#define RX_DRIVING_MASK               0x6000
++
++enum rtl_register_content {
++      _1000bps        = 0x10,
++      _100bps         = 0x08,
++      _10bps          = 0x04,
++      LINK_STATUS     = 0x02,
++      FULL_DUP        = 0x01,
++};
++
++#define RTL8152_MAX_TX                4
++#define RTL8152_MAX_RX                10
++#define INTBUFSIZE            2
++#define CRC_SIZE              4
++#define TX_ALIGN              4
++#define RX_ALIGN              8
++
++#define INTR_LINK             0x0004
++
++#define RTL8152_REQT_READ     0xc0
++#define RTL8152_REQT_WRITE    0x40
++#define RTL8152_REQ_GET_REGS  0x05
++#define RTL8152_REQ_SET_REGS  0x05
++
++#define BYTE_EN_DWORD         0xff
++#define BYTE_EN_WORD          0x33
++#define BYTE_EN_BYTE          0x11
++#define BYTE_EN_SIX_BYTES     0x3f
++#define BYTE_EN_START_MASK    0x0f
++#define BYTE_EN_END_MASK      0xf0
++
++#define RTL8153_MAX_PACKET    9216 /* 9K */
++#define RTL8153_MAX_MTU               (RTL8153_MAX_PACKET - VLAN_ETH_HLEN - VLAN_HLEN)
++#define RTL8152_RMS           (VLAN_ETH_FRAME_LEN + VLAN_HLEN)
++#define RTL8153_RMS           RTL8153_MAX_PACKET
++#define RTL8152_TX_TIMEOUT    (5 * HZ)
++
++/* rtl8152 flags */
++enum rtl8152_flags {
++      RTL8152_UNPLUG = 0,
++      RTL8152_SET_RX_MODE,
++      WORK_ENABLE,
++      RTL8152_LINK_CHG,
++      SELECTIVE_SUSPEND,
++      PHY_RESET,
++      SCHEDULE_TASKLET,
++};
++
++/* Define these values to match your device */
++#define VENDOR_ID_REALTEK             0x0bda
++#define PRODUCT_ID_RTL8152            0x8152
++#define PRODUCT_ID_RTL8153            0x8153
++
++#define VENDOR_ID_SAMSUNG             0x04e8
++#define PRODUCT_ID_SAMSUNG            0xa101
++
++#define MCU_TYPE_PLA                  0x0100
++#define MCU_TYPE_USB                  0x0000
++
++#define REALTEK_USB_DEVICE(vend, prod)        \
++      USB_DEVICE_INTERFACE_CLASS(vend, prod, USB_CLASS_VENDOR_SPEC)
++
++struct tally_counter {
++      __le64  tx_packets;
++      __le64  rx_packets;
++      __le64  tx_errors;
++      __le32  rx_errors;
++      __le16  rx_missed;
++      __le16  align_errors;
++      __le32  tx_one_collision;
++      __le32  tx_multi_collision;
++      __le64  rx_unicast;
++      __le64  rx_broadcast;
++      __le32  rx_multicast;
++      __le16  tx_aborted;
++      __le16  tx_underun;
++};
++
++struct rx_desc {
++      __le32 opts1;
++#define RX_LEN_MASK                   0x7fff
++
++      __le32 opts2;
++#define RD_UDP_CS                     (1 << 23)
++#define RD_TCP_CS                     (1 << 22)
++#define RD_IPV6_CS                    (1 << 20)
++#define RD_IPV4_CS                    (1 << 19)
++
++      __le32 opts3;
++#define IPF                           (1 << 23) /* IP checksum fail */
++#define UDPF                          (1 << 22) /* UDP checksum fail */
++#define TCPF                          (1 << 21) /* TCP checksum fail */
++#define RX_VLAN_TAG                   (1 << 16)
++
++      __le32 opts4;
++      __le32 opts5;
++      __le32 opts6;
++};
++
++struct tx_desc {
++      __le32 opts1;
++#define TX_FS                 (1 << 31) /* First segment of a packet */
++#define TX_LS                 (1 << 30) /* Final segment of a packet */
++#define GTSENDV4              (1 << 28)
++#define GTSENDV6              (1 << 27)
++#define GTTCPHO_SHIFT         18
++#define GTTCPHO_MAX           0x7fU
++#define TX_LEN_MAX            0x3ffffU
++
++      __le32 opts2;
++#define UDP_CS                        (1 << 31) /* Calculate UDP/IP checksum */
++#define TCP_CS                        (1 << 30) /* Calculate TCP/IP checksum */
++#define IPV4_CS                       (1 << 29) /* Calculate IPv4 checksum */
++#define IPV6_CS                       (1 << 28) /* Calculate IPv6 checksum */
++#define MSS_SHIFT             17
++#define MSS_MAX                       0x7ffU
++#define TCPHO_SHIFT           17
++#define TCPHO_MAX             0x7ffU
++#define TX_VLAN_TAG                   (1 << 16)
++};
++
++struct r8152;
++
++struct rx_agg {
++      struct list_head list;
++      struct urb *urb;
++      struct r8152 *context;
++      void *buffer;
++      void *head;
++};
++
++struct tx_agg {
++      struct list_head list;
++      struct urb *urb;
++      struct r8152 *context;
++      void *buffer;
++      void *head;
++      u32 skb_num;
++      u32 skb_len;
++};
++
++struct r8152 {
++      unsigned long flags;
++      struct usb_device *udev;
++      struct tasklet_struct tl;
++      struct usb_interface *intf;
++      struct net_device *netdev;
++      struct urb *intr_urb;
++      struct tx_agg tx_info[RTL8152_MAX_TX];
++      struct rx_agg rx_info[RTL8152_MAX_RX];
++      struct list_head rx_done, tx_free;
++      struct sk_buff_head tx_queue;
++      spinlock_t rx_lock, tx_lock;
++      struct delayed_work schedule;
++      struct mii_if_info mii;
++      struct mutex control;   /* use for hw setting */
++
++      struct rtl_ops {
++              void (*init)(struct r8152 *);
++              int (*enable)(struct r8152 *);
++              void (*disable)(struct r8152 *);
++              void (*up)(struct r8152 *);
++              void (*down)(struct r8152 *);
++              void (*unload)(struct r8152 *);
++              int (*eee_get)(struct r8152 *, struct ethtool_eee *);
++              int (*eee_set)(struct r8152 *, struct ethtool_eee *);
++      } __no_const rtl_ops;
++
++      int intr_interval;
++      u32 saved_wolopts;
++      u32 msg_enable;
++      u32 tx_qlen;
++      u16 ocp_base;
++      u8 *intr_buff;
++      u8 version;
++      u8 speed;
++};
++
++enum rtl_version {
++      RTL_VER_UNKNOWN = 0,
++      RTL_VER_01,
++      RTL_VER_02,
++      RTL_VER_03,
++      RTL_VER_04,
++      RTL_VER_05,
++      RTL_VER_MAX
++};
++
++enum tx_csum_stat {
++      TX_CSUM_SUCCESS = 0,
++      TX_CSUM_TSO,
++      TX_CSUM_NONE
++};
++
++/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
++ * The RTL chips use a 64 element hash table based on the Ethernet CRC.
++ */
++static const int multicast_filter_limit = 32;
++static unsigned int agg_buf_sz = 16384;
++
++#define RTL_LIMITED_TSO_SIZE  (agg_buf_sz - sizeof(struct tx_desc) - \
++                               VLAN_ETH_HLEN - VLAN_HLEN)
++
++static
++int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
++{
++      int ret;
++      void *tmp;
++
++      tmp = kmalloc(size, GFP_KERNEL);
++      if (!tmp)
++              return -ENOMEM;
++
++      ret = usb_control_msg(tp->udev, usb_rcvctrlpipe(tp->udev, 0),
++                            RTL8152_REQ_GET_REGS, RTL8152_REQT_READ,
++                            value, index, tmp, size, 500);
++
++      memcpy(data, tmp, size);
++      kfree(tmp);
++
++      return ret;
++}
++
++static
++int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
++{
++      int ret;
++      void *tmp;
++
++      tmp = kmemdup(data, size, GFP_KERNEL);
++      if (!tmp)
++              return -ENOMEM;
++
++      ret = usb_control_msg(tp->udev, usb_sndctrlpipe(tp->udev, 0),
++                            RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE,
++                            value, index, tmp, size, 500);
++
++      kfree(tmp);
++
++      return ret;
++}
++
++static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size,
++                          void *data, u16 type)
++{
++      u16 limit = 64;
++      int ret = 0;
++
++      if (test_bit(RTL8152_UNPLUG, &tp->flags))
++              return -ENODEV;
++
++      /* both size and indix must be 4 bytes align */
++      if ((size & 3) || !size || (index & 3) || !data)
++              return -EPERM;
++
++      if ((u32)index + (u32)size > 0xffff)
++              return -EPERM;
++
++      while (size) {
++              if (size > limit) {
++                      ret = get_registers(tp, index, type, limit, data);
++                      if (ret < 0)
++                              break;
++
++                      index += limit;
++                      data += limit;
++                      size -= limit;
++              } else {
++                      ret = get_registers(tp, index, type, size, data);
++                      if (ret < 0)
++                              break;
++
++                      index += size;
++                      data += size;
++                      size = 0;
++                      break;
++              }
++      }
++
++      return ret;
++}
++
++static int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen,
++                           u16 size, void *data, u16 type)
++{
++      int ret;
++      u16 byteen_start, byteen_end, byen;
++      u16 limit = 512;
++
++      if (test_bit(RTL8152_UNPLUG, &tp->flags))
++              return -ENODEV;
++
++      /* both size and indix must be 4 bytes align */
++      if ((size & 3) || !size || (index & 3) || !data)
++              return -EPERM;
++
++      if ((u32)index + (u32)size > 0xffff)
++              return -EPERM;
++
++      byteen_start = byteen & BYTE_EN_START_MASK;
++      byteen_end = byteen & BYTE_EN_END_MASK;
++
++      byen = byteen_start | (byteen_start << 4);
++      ret = set_registers(tp, index, type | byen, 4, data);
++      if (ret < 0)
++              goto error1;
++
++      index += 4;
++      data += 4;
++      size -= 4;
++
++      if (size) {
++              size -= 4;
++
++              while (size) {
++                      if (size > limit) {
++                              ret = set_registers(tp, index,
++                                                  type | BYTE_EN_DWORD,
++                                                  limit, data);
++                              if (ret < 0)
++                                      goto error1;
++
++                              index += limit;
++                              data += limit;
++                              size -= limit;
++                      } else {
++                              ret = set_registers(tp, index,
++                                                  type | BYTE_EN_DWORD,
++                                                  size, data);
++                              if (ret < 0)
++                                      goto error1;
++
++                              index += size;
++                              data += size;
++                              size = 0;
++                              break;
++                      }
++              }
++
++              byen = byteen_end | (byteen_end >> 4);
++              ret = set_registers(tp, index, type | byen, 4, data);
++              if (ret < 0)
++                      goto error1;
++      }
++
++error1:
++      return ret;
++}
++
++static inline
++int pla_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data)
++{
++      return generic_ocp_read(tp, index, size, data, MCU_TYPE_PLA);
++}
++
++static inline
++int pla_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data)
++{
++      return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_PLA);
++}
++
++static inline
++int usb_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data)
++{
++      return generic_ocp_read(tp, index, size, data, MCU_TYPE_USB);
++}
++
++static inline
++int usb_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data)
++{
++      return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_USB);
++}
++
++static u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index)
++{
++      __le32 data;
++
++      generic_ocp_read(tp, index, sizeof(data), &data, type);
++
++      return __le32_to_cpu(data);
++}
++
++static void ocp_write_dword(struct r8152 *tp, u16 type, u16 index, u32 data)
++{
++      __le32 tmp = __cpu_to_le32(data);
++
++      generic_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(tmp), &tmp, type);
++}
++
++static u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index)
++{
++      u32 data;
++      __le32 tmp;
++      u8 shift = index & 2;
++
++      index &= ~3;
++
++      generic_ocp_read(tp, index, sizeof(tmp), &tmp, type);
++
++      data = __le32_to_cpu(tmp);
++      data >>= (shift * 8);
++      data &= 0xffff;
++
++      return (u16)data;
++}
++
++static void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data)
++{
++      u32 mask = 0xffff;
++      __le32 tmp;
++      u16 byen = BYTE_EN_WORD;
++      u8 shift = index & 2;
++
++      data &= mask;
++
++      if (index & 2) {
++              byen <<= shift;
++              mask <<= (shift * 8);
++              data <<= (shift * 8);
++              index &= ~3;
++      }
++
++      generic_ocp_read(tp, index, sizeof(tmp), &tmp, type);
++
++      data |= __le32_to_cpu(tmp) & ~mask;
++      tmp = __cpu_to_le32(data);
++
++      generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type);
++}
++
++static u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index)
++{
++      u32 data;
++      __le32 tmp;
++      u8 shift = index & 3;
++
++      index &= ~3;
++
++      generic_ocp_read(tp, index, sizeof(tmp), &tmp, type);
++
++      data = __le32_to_cpu(tmp);
++      data >>= (shift * 8);
++      data &= 0xff;
++
++      return (u8)data;
++}
++
++static void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data)
++{
++      u32 mask = 0xff;
++      __le32 tmp;
++      u16 byen = BYTE_EN_BYTE;
++      u8 shift = index & 3;
++
++      data &= mask;
++
++      if (index & 3) {
++              byen <<= shift;
++              mask <<= (shift * 8);
++              data <<= (shift * 8);
++              index &= ~3;
++      }
++
++      generic_ocp_read(tp, index, sizeof(tmp), &tmp, type);
++
++      data |= __le32_to_cpu(tmp) & ~mask;
++      tmp = __cpu_to_le32(data);
++
++      generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type);
++}
++
++static u16 ocp_reg_read(struct r8152 *tp, u16 addr)
++{
++      u16 ocp_base, ocp_index;
++
++      ocp_base = addr & 0xf000;
++      if (ocp_base != tp->ocp_base) {
++              ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base);
++              tp->ocp_base = ocp_base;
++      }
++
++      ocp_index = (addr & 0x0fff) | 0xb000;
++      return ocp_read_word(tp, MCU_TYPE_PLA, ocp_index);
++}
++
++static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data)
++{
++      u16 ocp_base, ocp_index;
++
++      ocp_base = addr & 0xf000;
++      if (ocp_base != tp->ocp_base) {
++              ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base);
++              tp->ocp_base = ocp_base;
++      }
++
++      ocp_index = (addr & 0x0fff) | 0xb000;
++      ocp_write_word(tp, MCU_TYPE_PLA, ocp_index, data);
++}
++
++static inline void r8152_mdio_write(struct r8152 *tp, u32 reg_addr, u32 value)
++{
++      ocp_reg_write(tp, OCP_BASE_MII + reg_addr * 2, value);
++}
++
++static inline int r8152_mdio_read(struct r8152 *tp, u32 reg_addr)
++{
++      return ocp_reg_read(tp, OCP_BASE_MII + reg_addr * 2);
++}
++
++static void sram_write(struct r8152 *tp, u16 addr, u16 data)
++{
++      ocp_reg_write(tp, OCP_SRAM_ADDR, addr);
++      ocp_reg_write(tp, OCP_SRAM_DATA, data);
++}
++
++static u16 sram_read(struct r8152 *tp, u16 addr)
++{
++      ocp_reg_write(tp, OCP_SRAM_ADDR, addr);
++      return ocp_reg_read(tp, OCP_SRAM_DATA);
++}
++
++static int read_mii_word(struct net_device *netdev, int phy_id, int reg)
++{
++      struct r8152 *tp = netdev_priv(netdev);
++      int ret;
++
++      if (test_bit(RTL8152_UNPLUG, &tp->flags))
++              return -ENODEV;
++
++      if (phy_id != R8152_PHY_ID)
++              return -EINVAL;
++
++      ret = r8152_mdio_read(tp, reg);
++
++      return ret;
++}
++
++static
++void write_mii_word(struct net_device *netdev, int phy_id, int reg, int val)
++{
++      struct r8152 *tp = netdev_priv(netdev);
++
++      if (test_bit(RTL8152_UNPLUG, &tp->flags))
++              return;
++
++      if (phy_id != R8152_PHY_ID)
++              return;
++
++      r8152_mdio_write(tp, reg, val);
++}
++
++static int
++r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags);
++
++static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
++{
++      struct r8152 *tp = netdev_priv(netdev);
++      struct sockaddr *addr = p;
++      int ret = -EADDRNOTAVAIL;
++
++      if (!is_valid_ether_addr(addr->sa_data))
++              goto out1;
++
++      ret = usb_autopm_get_interface(tp->intf);
++      if (ret < 0)
++              goto out1;
++
++      mutex_lock(&tp->control);
++
++      memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
++
++      ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
++      pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, 8, addr->sa_data);
++      ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
++
++      mutex_unlock(&tp->control);
++
++      usb_autopm_put_interface(tp->intf);
++out1:
++      return ret;
++}
++
++static int set_ethernet_addr(struct r8152 *tp)
++{
++      struct net_device *dev = tp->netdev;
++      struct sockaddr sa;
++      int ret;
++
++      if (tp->version == RTL_VER_01)
++              ret = pla_ocp_read(tp, PLA_IDR, 8, sa.sa_data);
++      else
++              ret = pla_ocp_read(tp, PLA_BACKUP, 8, sa.sa_data);
++
++      if (ret < 0) {
++              netif_err(tp, probe, dev, "Get ether addr fail\n");
++      } else if (!is_valid_ether_addr(sa.sa_data)) {
++              netif_err(tp, probe, dev, "Invalid ether addr %pM\n",
++                        sa.sa_data);
++              eth_hw_addr_random(dev);
++              ether_addr_copy(sa.sa_data, dev->dev_addr);
++              ret = rtl8152_set_mac_address(dev, &sa);
++              netif_info(tp, probe, dev, "Random ether addr %pM\n",
++                         sa.sa_data);
++      } else {
++              if (tp->version == RTL_VER_01)
++                      ether_addr_copy(dev->dev_addr, sa.sa_data);
++              else
++                      ret = rtl8152_set_mac_address(dev, &sa);
++      }
++
++      return ret;
++}
++
++static void read_bulk_callback(struct urb *urb)
++{
++      struct net_device *netdev;
++      int status = urb->status;
++      struct rx_agg *agg;
++      struct r8152 *tp;
++      int result;
++
++      agg = urb->context;
++      if (!agg)
++              return;
++
++      tp = agg->context;
++      if (!tp)
++              return;
++
++      if (test_bit(RTL8152_UNPLUG, &tp->flags))
++              return;
++
++      if (!test_bit(WORK_ENABLE, &tp->flags))
++              return;
++
++      netdev = tp->netdev;
++
++      /* When link down, the driver would cancel all bulks. */
++      /* This avoid the re-submitting bulk */
++      if (!netif_carrier_ok(netdev))
++              return;
++
++      usb_mark_last_busy(tp->udev);
++
++      switch (status) {
++      case 0:
++              if (urb->actual_length < ETH_ZLEN)
++                      break;
++
++              spin_lock(&tp->rx_lock);
++              list_add_tail(&agg->list, &tp->rx_done);
++              spin_unlock(&tp->rx_lock);
++              tasklet_schedule(&tp->tl);
++              return;
++      case -ESHUTDOWN:
++              set_bit(RTL8152_UNPLUG, &tp->flags);
++              netif_device_detach(tp->netdev);
++              return;
++      case -ENOENT:
++              return; /* the urb is in unlink state */
++      case -ETIME:
++              if (net_ratelimit())
++                      netdev_warn(netdev, "maybe reset is needed?\n");
++              break;
++      default:
++              if (net_ratelimit())
++                      netdev_warn(netdev, "Rx status %d\n", status);
++              break;
++      }
++
++      result = r8152_submit_rx(tp, agg, GFP_ATOMIC);
++      if (result == -ENODEV) {
++              netif_device_detach(tp->netdev);
++      } else if (result) {
++              spin_lock(&tp->rx_lock);
++              list_add_tail(&agg->list, &tp->rx_done);
++              spin_unlock(&tp->rx_lock);
++              tasklet_schedule(&tp->tl);
++      }
++}
++
++static void write_bulk_callback(struct urb *urb)
++{
++      struct net_device_stats *stats;
++      struct net_device *netdev;
++      struct tx_agg *agg;
++      struct r8152 *tp;
++      int status = urb->status;
++
++      agg = urb->context;
++      if (!agg)
++              return;
++
++      tp = agg->context;
++      if (!tp)
++              return;
++
++      netdev = tp->netdev;
++      stats = &netdev->stats;
++      if (status) {
++              if (net_ratelimit())
++                      netdev_warn(netdev, "Tx status %d\n", status);
++              stats->tx_errors += agg->skb_num;
++      } else {
++              stats->tx_packets += agg->skb_num;
++              stats->tx_bytes += agg->skb_len;
++      }
++
++      spin_lock(&tp->tx_lock);
++      list_add_tail(&agg->list, &tp->tx_free);
++      spin_unlock(&tp->tx_lock);
++
++      usb_autopm_put_interface_async(tp->intf);
++
++      if (!netif_carrier_ok(netdev))
++              return;
++
++      if (!test_bit(WORK_ENABLE, &tp->flags))
++              return;
++
++      if (test_bit(RTL8152_UNPLUG, &tp->flags))
++              return;
++
++      if (!skb_queue_empty(&tp->tx_queue))
++              tasklet_schedule(&tp->tl);
++}
++
++static void intr_callback(struct urb *urb)
++{
++      struct r8152 *tp;
++      __le16 *d;
++      int status = urb->status;
++      int res;
++
++      tp = urb->context;
++      if (!tp)
++              return;
++
++      if (!test_bit(WORK_ENABLE, &tp->flags))
++              return;
++
++      if (test_bit(RTL8152_UNPLUG, &tp->flags))
++              return;
++
++      switch (status) {
++      case 0:                 /* success */
++              break;
++      case -ECONNRESET:       /* unlink */
++      case -ESHUTDOWN:
++              netif_device_detach(tp->netdev);
++      case -ENOENT:
++      case -EPROTO:
++              netif_info(tp, intr, tp->netdev,
++                         "Stop submitting intr, status %d\n", status);
++              return;
++      case -EOVERFLOW:
++              netif_info(tp, intr, tp->netdev, "intr status -EOVERFLOW\n");
++              goto resubmit;
++      /* -EPIPE:  should clear the halt */
++      default:
++              netif_info(tp, intr, tp->netdev, "intr status %d\n", status);
++              goto resubmit;
++      }
++
++      d = urb->transfer_buffer;
++      if (INTR_LINK & __le16_to_cpu(d[0])) {
++              if (!(tp->speed & LINK_STATUS)) {
++                      set_bit(RTL8152_LINK_CHG, &tp->flags);
++                      schedule_delayed_work(&tp->schedule, 0);
++              }
++      } else {
++              if (tp->speed & LINK_STATUS) {
++                      set_bit(RTL8152_LINK_CHG, &tp->flags);
++                      schedule_delayed_work(&tp->schedule, 0);
++              }
++      }
++
++resubmit:
++      res = usb_submit_urb(urb, GFP_ATOMIC);
++      if (res == -ENODEV)
++              netif_device_detach(tp->netdev);
++      else if (res)
++              netif_err(tp, intr, tp->netdev,
++                        "can't resubmit intr, status %d\n", res);
++}
++
++static inline void *rx_agg_align(void *data)
++{
++      return (void *)ALIGN((uintptr_t)data, RX_ALIGN);
++}
++
++static inline void *tx_agg_align(void *data)
++{
++      return (void *)ALIGN((uintptr_t)data, TX_ALIGN);
++}
++
++static void free_all_mem(struct r8152 *tp)
++{
++      int i;
++
++      for (i = 0; i < RTL8152_MAX_RX; i++) {
++              usb_free_urb(tp->rx_info[i].urb);
++              tp->rx_info[i].urb = NULL;
++
++              kfree(tp->rx_info[i].buffer);
++              tp->rx_info[i].buffer = NULL;
++              tp->rx_info[i].head = NULL;
++      }
++
++      for (i = 0; i < RTL8152_MAX_TX; i++) {
++              usb_free_urb(tp->tx_info[i].urb);
++              tp->tx_info[i].urb = NULL;
++
++              kfree(tp->tx_info[i].buffer);
++              tp->tx_info[i].buffer = NULL;
++              tp->tx_info[i].head = NULL;
++      }
++
++      usb_free_urb(tp->intr_urb);
++      tp->intr_urb = NULL;
++
++      kfree(tp->intr_buff);
++      tp->intr_buff = NULL;
++}
++
++static int alloc_all_mem(struct r8152 *tp)
++{
++      struct net_device *netdev = tp->netdev;
++      struct usb_interface *intf = tp->intf;
++      struct usb_host_interface *alt = intf->cur_altsetting;
++      struct usb_host_endpoint *ep_intr = alt->endpoint + 2;
++      struct urb *urb;
++      int node, i;
++      u8 *buf;
++
++      node = netdev->dev.parent ? dev_to_node(netdev->dev.parent) : -1;
++
++      spin_lock_init(&tp->rx_lock);
++      spin_lock_init(&tp->tx_lock);
++      INIT_LIST_HEAD(&tp->rx_done);
++      INIT_LIST_HEAD(&tp->tx_free);
++      skb_queue_head_init(&tp->tx_queue);
++
++      for (i = 0; i < RTL8152_MAX_RX; i++) {
++              buf = kmalloc_node(agg_buf_sz, GFP_KERNEL, node);
++              if (!buf)
++                      goto err1;
++
++              if (buf != rx_agg_align(buf)) {
++                      kfree(buf);
++                      buf = kmalloc_node(agg_buf_sz + RX_ALIGN, GFP_KERNEL,
++                                         node);
++                      if (!buf)
++                              goto err1;
++              }
++
++              urb = usb_alloc_urb(0, GFP_KERNEL);
++              if (!urb) {
++                      kfree(buf);
++                      goto err1;
++              }
++
++              INIT_LIST_HEAD(&tp->rx_info[i].list);
++              tp->rx_info[i].context = tp;
++              tp->rx_info[i].urb = urb;
++              tp->rx_info[i].buffer = buf;
++              tp->rx_info[i].head = rx_agg_align(buf);
++      }
++
++      for (i = 0; i < RTL8152_MAX_TX; i++) {
++              buf = kmalloc_node(agg_buf_sz, GFP_KERNEL, node);
++              if (!buf)
++                      goto err1;
++
++              if (buf != tx_agg_align(buf)) {
++                      kfree(buf);
++                      buf = kmalloc_node(agg_buf_sz + TX_ALIGN, GFP_KERNEL,
++                                         node);
++                      if (!buf)
++                              goto err1;
++              }
++
++              urb = usb_alloc_urb(0, GFP_KERNEL);
++              if (!urb) {
++                      kfree(buf);
++                      goto err1;
++              }
++
++              INIT_LIST_HEAD(&tp->tx_info[i].list);
++              tp->tx_info[i].context = tp;
++              tp->tx_info[i].urb = urb;
++              tp->tx_info[i].buffer = buf;
++              tp->tx_info[i].head = tx_agg_align(buf);
++
++              list_add_tail(&tp->tx_info[i].list, &tp->tx_free);
++      }
++
++      tp->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
++      if (!tp->intr_urb)
++              goto err1;
++
++      tp->intr_buff = kmalloc(INTBUFSIZE, GFP_KERNEL);
++      if (!tp->intr_buff)
++              goto err1;
++
++      tp->intr_interval = (int)ep_intr->desc.bInterval;
++      usb_fill_int_urb(tp->intr_urb, tp->udev, usb_rcvintpipe(tp->udev, 3),
++                       tp->intr_buff, INTBUFSIZE, intr_callback,
++                       tp, tp->intr_interval);
++
++      return 0;
++
++err1:
++      free_all_mem(tp);
++      return -ENOMEM;
++}
++
++static struct tx_agg *r8152_get_tx_agg(struct r8152 *tp)
++{
++      struct tx_agg *agg = NULL;
++      unsigned long flags;
++
++      if (list_empty(&tp->tx_free))
++              return NULL;
++
++      spin_lock_irqsave(&tp->tx_lock, flags);
++      if (!list_empty(&tp->tx_free)) {
++              struct list_head *cursor;
++
++              cursor = tp->tx_free.next;
++              list_del_init(cursor);
++              agg = list_entry(cursor, struct tx_agg, list);
++      }
++      spin_unlock_irqrestore(&tp->tx_lock, flags);
++
++      return agg;
++}
++
++static inline __be16 get_protocol(struct sk_buff *skb)
++{
++      __be16 protocol;
++
++      if (skb->protocol == htons(ETH_P_8021Q))
++              protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
++      else
++              protocol = skb->protocol;
++
++      return protocol;
++}
++
++/* r8152_csum_workaround()
++ * The hw limites the value the transport offset. When the offset is out of the
++ * range, calculate the checksum by sw.
++ */
++static void r8152_csum_workaround(struct r8152 *tp, struct sk_buff *skb,
++                                struct sk_buff_head *list)
++{
++      if (skb_shinfo(skb)->gso_size) {
++              netdev_features_t features = tp->netdev->features;
++              struct sk_buff_head seg_list;
++              struct sk_buff *segs, *nskb;
++
++              features &= ~(NETIF_F_SG | NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
++              segs = skb_gso_segment(skb, features);
++              if (IS_ERR(segs) || !segs)
++                      goto drop;
++
++              __skb_queue_head_init(&seg_list);
++
++              do {
++                      nskb = segs;
++                      segs = segs->next;
++                      nskb->next = NULL;
++                      __skb_queue_tail(&seg_list, nskb);
++              } while (segs);
++
++              skb_queue_splice(&seg_list, list);
++              dev_kfree_skb(skb);
++      } else if (skb->ip_summed == CHECKSUM_PARTIAL) {
++              if (skb_checksum_help(skb) < 0)
++                      goto drop;
++
++              __skb_queue_head(list, skb);
++      } else {
++              struct net_device_stats *stats;
++
++drop:
++              stats = &tp->netdev->stats;
++              stats->tx_dropped++;
++              dev_kfree_skb(skb);
++      }
++}
++
++/* msdn_giant_send_check()
++ * According to the document of microsoft, the TCP Pseudo Header excludes the
++ * packet length for IPv6 TCP large packets.
++ */
++static int msdn_giant_send_check(struct sk_buff *skb)
++{
++      const struct ipv6hdr *ipv6h;
++      struct tcphdr *th;
++      int ret;
++
++      ret = skb_cow_head(skb, 0);
++      if (ret)
++              return ret;
++
++      ipv6h = ipv6_hdr(skb);
++      th = tcp_hdr(skb);
++
++      th->check = 0;
++      th->check = ~tcp_v6_check(0, &ipv6h->saddr, &ipv6h->daddr, 0);
++
++      return ret;
++}
++
++static inline void rtl_tx_vlan_tag(struct tx_desc *desc, struct sk_buff *skb)
++{
++      if (vlan_tx_tag_present(skb)) {
++              u32 opts2;
++
++              opts2 = TX_VLAN_TAG | swab16(vlan_tx_tag_get(skb));
++              desc->opts2 |= cpu_to_le32(opts2);
++      }
++}
++
++static inline void rtl_rx_vlan_tag(struct rx_desc *desc, struct sk_buff *skb)
++{
++      u32 opts2 = le32_to_cpu(desc->opts2);
++
++      if (opts2 & RX_VLAN_TAG)
++              __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
++                                     swab16(opts2 & 0xffff));
++}
++
++static int r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc,
++                       struct sk_buff *skb, u32 len, u32 transport_offset)
++{
++      u32 mss = skb_shinfo(skb)->gso_size;
++      u32 opts1, opts2 = 0;
++      int ret = TX_CSUM_SUCCESS;
++
++      WARN_ON_ONCE(len > TX_LEN_MAX);
++
++      opts1 = len | TX_FS | TX_LS;
++
++      if (mss) {
++              if (transport_offset > GTTCPHO_MAX) {
++                      netif_warn(tp, tx_err, tp->netdev,
++                                 "Invalid transport offset 0x%x for TSO\n",
++                                 transport_offset);
++                      ret = TX_CSUM_TSO;
++                      goto unavailable;
++              }
++
++              switch (get_protocol(skb)) {
++              case htons(ETH_P_IP):
++                      opts1 |= GTSENDV4;
++                      break;
++
++              case htons(ETH_P_IPV6):
++                      if (msdn_giant_send_check(skb)) {
++                              ret = TX_CSUM_TSO;
++                              goto unavailable;
++                      }
++                      opts1 |= GTSENDV6;
++                      break;
++
++              default:
++                      WARN_ON_ONCE(1);
++                      break;
++              }
++
++              opts1 |= transport_offset << GTTCPHO_SHIFT;
++              opts2 |= min(mss, MSS_MAX) << MSS_SHIFT;
++      } else if (skb->ip_summed == CHECKSUM_PARTIAL) {
++              u8 ip_protocol;
++
++              if (transport_offset > TCPHO_MAX) {
++                      netif_warn(tp, tx_err, tp->netdev,
++                                 "Invalid transport offset 0x%x\n",
++                                 transport_offset);
++                      ret = TX_CSUM_NONE;
++                      goto unavailable;
++              }
++
++              switch (get_protocol(skb)) {
++              case htons(ETH_P_IP):
++                      opts2 |= IPV4_CS;
++                      ip_protocol = ip_hdr(skb)->protocol;
++                      break;
++
++              case htons(ETH_P_IPV6):
++                      opts2 |= IPV6_CS;
++                      ip_protocol = ipv6_hdr(skb)->nexthdr;
++                      break;
++
++              default:
++                      ip_protocol = IPPROTO_RAW;
++                      break;
++              }
++
++              if (ip_protocol == IPPROTO_TCP)
++                      opts2 |= TCP_CS;
++              else if (ip_protocol == IPPROTO_UDP)
++                      opts2 |= UDP_CS;
++              else
++                      WARN_ON_ONCE(1);
++
++              opts2 |= transport_offset << TCPHO_SHIFT;
++      }
++
++      desc->opts2 = cpu_to_le32(opts2);
++      desc->opts1 = cpu_to_le32(opts1);
++
++unavailable:
++      return ret;
++}
++
++static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
++{
++      struct sk_buff_head skb_head, *tx_queue = &tp->tx_queue;
++      int remain, ret;
++      u8 *tx_data;
++
++      __skb_queue_head_init(&skb_head);
++      spin_lock(&tx_queue->lock);
++      skb_queue_splice_init(tx_queue, &skb_head);
++      spin_unlock(&tx_queue->lock);
++
++      tx_data = agg->head;
++      agg->skb_num = 0;
++      agg->skb_len = 0;
++      remain = agg_buf_sz;
++
++      while (remain >= ETH_ZLEN + sizeof(struct tx_desc)) {
++              struct tx_desc *tx_desc;
++              struct sk_buff *skb;
++              unsigned int len;
++              u32 offset;
++
++              skb = __skb_dequeue(&skb_head);
++              if (!skb)
++                      break;
++
++              len = skb->len + sizeof(*tx_desc);
++
++              if (len > remain) {
++                      __skb_queue_head(&skb_head, skb);
++                      break;
++              }
++
++              tx_data = tx_agg_align(tx_data);
++              tx_desc = (struct tx_desc *)tx_data;
++
++              offset = (u32)skb_transport_offset(skb);
++
++              if (r8152_tx_csum(tp, tx_desc, skb, skb->len, offset)) {
++                      r8152_csum_workaround(tp, skb, &skb_head);
++                      continue;
++              }
++
++              rtl_tx_vlan_tag(tx_desc, skb);
++
++              tx_data += sizeof(*tx_desc);
++
++              len = skb->len;
++              if (skb_copy_bits(skb, 0, tx_data, len) < 0) {
++                      struct net_device_stats *stats = &tp->netdev->stats;
++
++                      stats->tx_dropped++;
++                      dev_kfree_skb_any(skb);
++                      tx_data -= sizeof(*tx_desc);
++                      continue;
++              }
++
++              tx_data += len;
++              agg->skb_len += len;
++              agg->skb_num++;
++
++              dev_kfree_skb_any(skb);
++
++              remain = agg_buf_sz - (int)(tx_agg_align(tx_data) - agg->head);
++      }
++
++      if (!skb_queue_empty(&skb_head)) {
++              spin_lock(&tx_queue->lock);
++              skb_queue_splice(&skb_head, tx_queue);
++              spin_unlock(&tx_queue->lock);
++      }
++
++      netif_tx_lock(tp->netdev);
++
++      if (netif_queue_stopped(tp->netdev) &&
++          skb_queue_len(&tp->tx_queue) < tp->tx_qlen)
++              netif_wake_queue(tp->netdev);
++
++      netif_tx_unlock(tp->netdev);
++
++      ret = usb_autopm_get_interface_async(tp->intf);
++      if (ret < 0)
++              goto out_tx_fill;
++
++      usb_fill_bulk_urb(agg->urb, tp->udev, usb_sndbulkpipe(tp->udev, 2),
++                        agg->head, (int)(tx_data - (u8 *)agg->head),
++                        (usb_complete_t)write_bulk_callback, agg);
++
++      ret = usb_submit_urb(agg->urb, GFP_ATOMIC);
++      if (ret < 0)
++              usb_autopm_put_interface_async(tp->intf);
++
++out_tx_fill:
++      return ret;
++}
++
++static u8 r8152_rx_csum(struct r8152 *tp, struct rx_desc *rx_desc)
++{
++      u8 checksum = CHECKSUM_NONE;
++      u32 opts2, opts3;
++
++      if (tp->version == RTL_VER_01)
++              goto return_result;
++
++      opts2 = le32_to_cpu(rx_desc->opts2);
++      opts3 = le32_to_cpu(rx_desc->opts3);
++
++      if (opts2 & RD_IPV4_CS) {
++              if (opts3 & IPF)
++                      checksum = CHECKSUM_NONE;
++              else if ((opts2 & RD_UDP_CS) && (opts3 & UDPF))
++                      checksum = CHECKSUM_NONE;
++              else if ((opts2 & RD_TCP_CS) && (opts3 & TCPF))
++                      checksum = CHECKSUM_NONE;
++              else
++                      checksum = CHECKSUM_UNNECESSARY;
++      } else if (RD_IPV6_CS) {
++              if ((opts2 & RD_UDP_CS) && !(opts3 & UDPF))
++                      checksum = CHECKSUM_UNNECESSARY;
++              else if ((opts2 & RD_TCP_CS) && !(opts3 & TCPF))
++                      checksum = CHECKSUM_UNNECESSARY;
++      }
++
++return_result:
++      return checksum;
++}
++
++static void rx_bottom(struct r8152 *tp)
++{
++      unsigned long flags;
++      struct list_head *cursor, *next, rx_queue;
++
++      if (list_empty(&tp->rx_done))
++              return;
++
++      INIT_LIST_HEAD(&rx_queue);
++      spin_lock_irqsave(&tp->rx_lock, flags);
++      list_splice_init(&tp->rx_done, &rx_queue);
++      spin_unlock_irqrestore(&tp->rx_lock, flags);
++
++      list_for_each_safe(cursor, next, &rx_queue) {
++              struct rx_desc *rx_desc;
++              struct rx_agg *agg;
++              int len_used = 0;
++              struct urb *urb;
++              u8 *rx_data;
++              int ret;
++
++              list_del_init(cursor);
++
++              agg = list_entry(cursor, struct rx_agg, list);
++              urb = agg->urb;
++              if (urb->actual_length < ETH_ZLEN)
++                      goto submit;
++
++              rx_desc = agg->head;
++              rx_data = agg->head;
++              len_used += sizeof(struct rx_desc);
++
++              while (urb->actual_length > len_used) {
++                      struct net_device *netdev = tp->netdev;
++                      struct net_device_stats *stats = &netdev->stats;
++                      unsigned int pkt_len;
++                      struct sk_buff *skb;
++
++                      pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
++                      if (pkt_len < ETH_ZLEN)
++                              break;
++
++                      len_used += pkt_len;
++                      if (urb->actual_length < len_used)
++                              break;
++
++                      pkt_len -= CRC_SIZE;
++                      rx_data += sizeof(struct rx_desc);
++
++                      skb = netdev_alloc_skb_ip_align(netdev, pkt_len);
++                      if (!skb) {
++                              stats->rx_dropped++;
++                              goto find_next_rx;
++                      }
++
++                      skb->ip_summed = r8152_rx_csum(tp, rx_desc);
++                      memcpy(skb->data, rx_data, pkt_len);
++                      skb_put(skb, pkt_len);
++                      skb->protocol = eth_type_trans(skb, netdev);
++                      rtl_rx_vlan_tag(rx_desc, skb);
++                      netif_receive_skb(skb);
++                      stats->rx_packets++;
++                      stats->rx_bytes += pkt_len;
++
++find_next_rx:
++                      rx_data = rx_agg_align(rx_data + pkt_len + CRC_SIZE);
++                      rx_desc = (struct rx_desc *)rx_data;
++                      len_used = (int)(rx_data - (u8 *)agg->head);
++                      len_used += sizeof(struct rx_desc);
++              }
++
++submit:
++              ret = r8152_submit_rx(tp, agg, GFP_ATOMIC);
++              if (ret && ret != -ENODEV) {
++                      spin_lock_irqsave(&tp->rx_lock, flags);
++                      list_add_tail(&agg->list, &tp->rx_done);
++                      spin_unlock_irqrestore(&tp->rx_lock, flags);
++                      tasklet_schedule(&tp->tl);
++              }
++      }
++}
++
++static void tx_bottom(struct r8152 *tp)
++{
++      int res;
++
++      do {
++              struct tx_agg *agg;
++
++              if (skb_queue_empty(&tp->tx_queue))
++                      break;
++
++              agg = r8152_get_tx_agg(tp);
++              if (!agg)
++                      break;
++
++              res = r8152_tx_agg_fill(tp, agg);
++              if (res) {
++                      struct net_device *netdev = tp->netdev;
++
++                      if (res == -ENODEV) {
++                              netif_device_detach(netdev);
++                      } else {
++                              struct net_device_stats *stats = &netdev->stats;
++                              unsigned long flags;
++
++                              netif_warn(tp, tx_err, netdev,
++                                         "failed tx_urb %d\n", res);
++                              stats->tx_dropped += agg->skb_num;
++
++                              spin_lock_irqsave(&tp->tx_lock, flags);
++                              list_add_tail(&agg->list, &tp->tx_free);
++                              spin_unlock_irqrestore(&tp->tx_lock, flags);
++                      }
++              }
++      } while (res == 0);
++}
++
++static void bottom_half(unsigned long data)
++{
++      struct r8152 *tp;
++
++      tp = (struct r8152 *)data;
++
++      if (test_bit(RTL8152_UNPLUG, &tp->flags))
++              return;
++
++      if (!test_bit(WORK_ENABLE, &tp->flags))
++              return;
++
++      /* When link down, the driver would cancel all bulks. */
++      /* This avoid the re-submitting bulk */
++      if (!netif_carrier_ok(tp->netdev))
++              return;
++
++      rx_bottom(tp);
++      tx_bottom(tp);
++}
++
++static
++int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags)
++{
++      usb_fill_bulk_urb(agg->urb, tp->udev, usb_rcvbulkpipe(tp->udev, 1),
++                        agg->head, agg_buf_sz,
++                        (usb_complete_t)read_bulk_callback, agg);
++
++      return usb_submit_urb(agg->urb, mem_flags);
++}
++
++static void rtl_drop_queued_tx(struct r8152 *tp)
++{
++      struct net_device_stats *stats = &tp->netdev->stats;
++      struct sk_buff_head skb_head, *tx_queue = &tp->tx_queue;
++      struct sk_buff *skb;
++
++      if (skb_queue_empty(tx_queue))
++              return;
++
++      __skb_queue_head_init(&skb_head);
++      spin_lock_bh(&tx_queue->lock);
++      skb_queue_splice_init(tx_queue, &skb_head);
++      spin_unlock_bh(&tx_queue->lock);
++
++      while ((skb = __skb_dequeue(&skb_head))) {
++              dev_kfree_skb(skb);
++              stats->tx_dropped++;
++      }
++}
++
++static void rtl8152_tx_timeout(struct net_device *netdev)
++{
++      struct r8152 *tp = netdev_priv(netdev);
++      int i;
++
++      netif_warn(tp, tx_err, netdev, "Tx timeout\n");
++      for (i = 0; i < RTL8152_MAX_TX; i++)
++              usb_unlink_urb(tp->tx_info[i].urb);
++}
++
++static void rtl8152_set_rx_mode(struct net_device *netdev)
++{
++      struct r8152 *tp = netdev_priv(netdev);
++
++      if (tp->speed & LINK_STATUS) {
++              set_bit(RTL8152_SET_RX_MODE, &tp->flags);
++              schedule_delayed_work(&tp->schedule, 0);
++      }
++}
++
++static void _rtl8152_set_rx_mode(struct net_device *netdev)
++{
++      struct r8152 *tp = netdev_priv(netdev);
++      u32 mc_filter[2];       /* Multicast hash filter */
++      __le32 tmp[2];
++      u32 ocp_data;
++
++      clear_bit(RTL8152_SET_RX_MODE, &tp->flags);
++      netif_stop_queue(netdev);
++      ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
++      ocp_data &= ~RCR_ACPT_ALL;
++      ocp_data |= RCR_AB | RCR_APM;
++
++      if (netdev->flags & IFF_PROMISC) {
++              /* Unconditionally log net taps. */
++              netif_notice(tp, link, netdev, "Promiscuous mode enabled\n");
++              ocp_data |= RCR_AM | RCR_AAP;
++              mc_filter[1] = 0xffffffff;
++              mc_filter[0] = 0xffffffff;
++      } else if ((netdev_mc_count(netdev) > multicast_filter_limit) ||
++                 (netdev->flags & IFF_ALLMULTI)) {
++              /* Too many to filter perfectly -- accept all multicasts. */
++              ocp_data |= RCR_AM;
++              mc_filter[1] = 0xffffffff;
++              mc_filter[0] = 0xffffffff;
++      } else {
++              struct netdev_hw_addr *ha;
++
++              mc_filter[1] = 0;
++              mc_filter[0] = 0;
++              netdev_for_each_mc_addr(ha, netdev) {
++                      int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
++
++                      mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
++                      ocp_data |= RCR_AM;
++              }
++      }
++
++      tmp[0] = __cpu_to_le32(swab32(mc_filter[1]));
++      tmp[1] = __cpu_to_le32(swab32(mc_filter[0]));
++
++      pla_ocp_write(tp, PLA_MAR, BYTE_EN_DWORD, sizeof(tmp), tmp);
++      ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
++      netif_wake_queue(netdev);
++}
++
++static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
++                                    struct net_device *netdev)
++{
++      struct r8152 *tp = netdev_priv(netdev);
++
++      skb_tx_timestamp(skb);
++
++      skb_queue_tail(&tp->tx_queue, skb);
++
++      if (!list_empty(&tp->tx_free)) {
++              if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
++                      set_bit(SCHEDULE_TASKLET, &tp->flags);
++                      schedule_delayed_work(&tp->schedule, 0);
++              } else {
++                      usb_mark_last_busy(tp->udev);
++                      tasklet_schedule(&tp->tl);
++              }
++      } else if (skb_queue_len(&tp->tx_queue) > tp->tx_qlen) {
++              netif_stop_queue(netdev);
++      }
++
++      return NETDEV_TX_OK;
++}
++
++static void r8152b_reset_packet_filter(struct r8152 *tp)
++{
++      u32     ocp_data;
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC);
++      ocp_data &= ~FMC_FCR_MCU_EN;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data);
++      ocp_data |= FMC_FCR_MCU_EN;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data);
++}
++
++static void rtl8152_nic_reset(struct r8152 *tp)
++{
++      int     i;
++
++      ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST);
++
++      for (i = 0; i < 1000; i++) {
++              if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST))
++                      break;
++              usleep_range(100, 400);
++      }
++}
++
++static void set_tx_qlen(struct r8152 *tp)
++{
++      struct net_device *netdev = tp->netdev;
++
++      tp->tx_qlen = agg_buf_sz / (netdev->mtu + VLAN_ETH_HLEN + VLAN_HLEN +
++                                  sizeof(struct tx_desc));
++}
++
++static inline u8 rtl8152_get_speed(struct r8152 *tp)
++{
++      return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
++}
++
++static void rtl_set_eee_plus(struct r8152 *tp)
++{
++      u32 ocp_data;
++      u8 speed;
++
++      speed = rtl8152_get_speed(tp);
++      if (speed & _10bps) {
++              ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
++              ocp_data |= EEEP_CR_EEEP_TX;
++              ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
++      } else {
++              ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
++              ocp_data &= ~EEEP_CR_EEEP_TX;
++              ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
++      }
++}
++
++static void rxdy_gated_en(struct r8152 *tp, bool enable)
++{
++      u32 ocp_data;
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
++      if (enable)
++              ocp_data |= RXDY_GATED_EN;
++      else
++              ocp_data &= ~RXDY_GATED_EN;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
++}
++
++static int rtl_start_rx(struct r8152 *tp)
++{
++      int i, ret = 0;
++
++      INIT_LIST_HEAD(&tp->rx_done);
++      for (i = 0; i < RTL8152_MAX_RX; i++) {
++              INIT_LIST_HEAD(&tp->rx_info[i].list);
++              ret = r8152_submit_rx(tp, &tp->rx_info[i], GFP_KERNEL);
++              if (ret)
++                      break;
++      }
++
++      return ret;
++}
++
++static int rtl_stop_rx(struct r8152 *tp)
++{
++      int i;
++
++      for (i = 0; i < RTL8152_MAX_RX; i++)
++              usb_kill_urb(tp->rx_info[i].urb);
++
++      return 0;
++}
++
++static int rtl_enable(struct r8152 *tp)
++{
++      u32 ocp_data;
++
++      r8152b_reset_packet_filter(tp);
++
++      ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
++      ocp_data |= CR_RE | CR_TE;
++      ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
++
++      rxdy_gated_en(tp, false);
++
++      return rtl_start_rx(tp);
++}
++
++static int rtl8152_enable(struct r8152 *tp)
++{
++      if (test_bit(RTL8152_UNPLUG, &tp->flags))
++              return -ENODEV;
++
++      set_tx_qlen(tp);
++      rtl_set_eee_plus(tp);
++
++      return rtl_enable(tp);
++}
++
++static void r8153_set_rx_agg(struct r8152 *tp)
++{
++      u8 speed;
++
++      speed = rtl8152_get_speed(tp);
++      if (speed & _1000bps) {
++              if (tp->udev->speed == USB_SPEED_SUPER) {
++                      ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH,
++                                      RX_THR_SUPPER);
++                      ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG,
++                                      EARLY_AGG_SUPPER);
++              } else {
++                      ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH,
++                                      RX_THR_HIGH);
++                      ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG,
++                                      EARLY_AGG_HIGH);
++              }
++      } else {
++              ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_SLOW);
++              ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG,
++                              EARLY_AGG_SLOW);
++      }
++}
++
++static int rtl8153_enable(struct r8152 *tp)
++{
++      if (test_bit(RTL8152_UNPLUG, &tp->flags))
++              return -ENODEV;
++
++      set_tx_qlen(tp);
++      rtl_set_eee_plus(tp);
++      r8153_set_rx_agg(tp);
++
++      return rtl_enable(tp);
++}
++
++static void rtl_disable(struct r8152 *tp)
++{
++      u32 ocp_data;
++      int i;
++
++      if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
++              rtl_drop_queued_tx(tp);
++              return;
++      }
++
++      ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
++      ocp_data &= ~RCR_ACPT_ALL;
++      ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
++
++      rtl_drop_queued_tx(tp);
++
++      for (i = 0; i < RTL8152_MAX_TX; i++)
++              usb_kill_urb(tp->tx_info[i].urb);
++
++      rxdy_gated_en(tp, true);
++
++      for (i = 0; i < 1000; i++) {
++              ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++              if ((ocp_data & FIFO_EMPTY) == FIFO_EMPTY)
++                      break;
++              usleep_range(1000, 2000);
++      }
++
++      for (i = 0; i < 1000; i++) {
++              if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0) & TCR0_TX_EMPTY)
++                      break;
++              usleep_range(1000, 2000);
++      }
++
++      rtl_stop_rx(tp);
++
++      rtl8152_nic_reset(tp);
++}
++
++static void r8152_power_cut_en(struct r8152 *tp, bool enable)
++{
++      u32 ocp_data;
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
++      if (enable)
++              ocp_data |= POWER_CUT;
++      else
++              ocp_data &= ~POWER_CUT;
++      ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
++      ocp_data &= ~RESUME_INDICATE;
++      ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
++}
++
++static void rtl_rx_vlan_en(struct r8152 *tp, bool enable)
++{
++      u32 ocp_data;
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
++      if (enable)
++              ocp_data |= CPCR_RX_VLAN;
++      else
++              ocp_data &= ~CPCR_RX_VLAN;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
++}
++
++static int rtl8152_set_features(struct net_device *dev,
++                              netdev_features_t features)
++{
++      netdev_features_t changed = features ^ dev->features;
++      struct r8152 *tp = netdev_priv(dev);
++      int ret;
++
++      ret = usb_autopm_get_interface(tp->intf);
++      if (ret < 0)
++              goto out;
++
++      mutex_lock(&tp->control);
++
++      if (changed & NETIF_F_HW_VLAN_CTAG_RX) {
++              if (features & NETIF_F_HW_VLAN_CTAG_RX)
++                      rtl_rx_vlan_en(tp, true);
++              else
++                      rtl_rx_vlan_en(tp, false);
++      }
++
++      mutex_unlock(&tp->control);
++
++      usb_autopm_put_interface(tp->intf);
++
++out:
++      return ret;
++}
++
++#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
++
++static u32 __rtl_get_wol(struct r8152 *tp)
++{
++      u32 ocp_data;
++      u32 wolopts = 0;
++
++      ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5);
++      if (!(ocp_data & LAN_WAKE_EN))
++              return 0;
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
++      if (ocp_data & LINK_ON_WAKE_EN)
++              wolopts |= WAKE_PHY;
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
++      if (ocp_data & UWF_EN)
++              wolopts |= WAKE_UCAST;
++      if (ocp_data & BWF_EN)
++              wolopts |= WAKE_BCAST;
++      if (ocp_data & MWF_EN)
++              wolopts |= WAKE_MCAST;
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
++      if (ocp_data & MAGIC_EN)
++              wolopts |= WAKE_MAGIC;
++
++      return wolopts;
++}
++
++static void __rtl_set_wol(struct r8152 *tp, u32 wolopts)
++{
++      u32 ocp_data;
++
++      ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
++      ocp_data &= ~LINK_ON_WAKE_EN;
++      if (wolopts & WAKE_PHY)
++              ocp_data |= LINK_ON_WAKE_EN;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
++      ocp_data &= ~(UWF_EN | BWF_EN | MWF_EN | LAN_WAKE_EN);
++      if (wolopts & WAKE_UCAST)
++              ocp_data |= UWF_EN;
++      if (wolopts & WAKE_BCAST)
++              ocp_data |= BWF_EN;
++      if (wolopts & WAKE_MCAST)
++              ocp_data |= MWF_EN;
++      if (wolopts & WAKE_ANY)
++              ocp_data |= LAN_WAKE_EN;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data);
++
++      ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
++      ocp_data &= ~MAGIC_EN;
++      if (wolopts & WAKE_MAGIC)
++              ocp_data |= MAGIC_EN;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data);
++
++      if (wolopts & WAKE_ANY)
++              device_set_wakeup_enable(&tp->udev->dev, true);
++      else
++              device_set_wakeup_enable(&tp->udev->dev, false);
++}
++
++static void rtl_runtime_suspend_enable(struct r8152 *tp, bool enable)
++{
++      if (enable) {
++              u32 ocp_data;
++
++              __rtl_set_wol(tp, WAKE_ANY);
++
++              ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
++
++              ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
++              ocp_data |= LINK_OFF_WAKE_EN;
++              ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
++
++              ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
++      } else {
++              __rtl_set_wol(tp, tp->saved_wolopts);
++      }
++}
++
++static void rtl_phy_reset(struct r8152 *tp)
++{
++      u16 data;
++      int i;
++
++      clear_bit(PHY_RESET, &tp->flags);
++
++      data = r8152_mdio_read(tp, MII_BMCR);
++
++      /* don't reset again before the previous one complete */
++      if (data & BMCR_RESET)
++              return;
++
++      data |= BMCR_RESET;
++      r8152_mdio_write(tp, MII_BMCR, data);
++
++      for (i = 0; i < 50; i++) {
++              msleep(20);
++              if ((r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET) == 0)
++                      break;
++      }
++}
++
++static void r8153_teredo_off(struct r8152 *tp)
++{
++      u32 ocp_data;
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
++      ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK | OOB_TEREDO_EN);
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
++
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE);
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_REALWOW_TIMER, 0);
++      ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0);
++}
++
++static void r8152b_disable_aldps(struct r8152 *tp)
++{
++      ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPDNPS | LINKENA | DIS_SDSAVE);
++      msleep(20);
++}
++
++static inline void r8152b_enable_aldps(struct r8152 *tp)
++{
++      ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPWRSAVE | ENPDNPS |
++                                          LINKENA | DIS_SDSAVE);
++}
++
++static void rtl8152_disable(struct r8152 *tp)
++{
++      r8152b_disable_aldps(tp);
++      rtl_disable(tp);
++      r8152b_enable_aldps(tp);
++}
++
++static void r8152b_hw_phy_cfg(struct r8152 *tp)
++{
++      u16 data;
++
++      data = r8152_mdio_read(tp, MII_BMCR);
++      if (data & BMCR_PDOWN) {
++              data &= ~BMCR_PDOWN;
++              r8152_mdio_write(tp, MII_BMCR, data);
++      }
++
++      set_bit(PHY_RESET, &tp->flags);
++}
++
++static void r8152b_exit_oob(struct r8152 *tp)
++{
++      u32 ocp_data;
++      int i;
++
++      ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
++      ocp_data &= ~RCR_ACPT_ALL;
++      ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
++
++      rxdy_gated_en(tp, true);
++      r8153_teredo_off(tp);
++      r8152b_hw_phy_cfg(tp);
++
++      ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
++      ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00);
++
++      ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++      ocp_data &= ~NOW_IS_OOB;
++      ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
++      ocp_data &= ~MCU_BORW_EN;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
++
++      for (i = 0; i < 1000; i++) {
++              ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++              if (ocp_data & LINK_LIST_READY)
++                      break;
++              usleep_range(1000, 2000);
++      }
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
++      ocp_data |= RE_INIT_LL;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
++
++      for (i = 0; i < 1000; i++) {
++              ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++              if (ocp_data & LINK_LIST_READY)
++                      break;
++              usleep_range(1000, 2000);
++      }
++
++      rtl8152_nic_reset(tp);
++
++      /* rx share fifo credit full threshold */
++      ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL);
++
++      if (tp->udev->speed == USB_SPEED_FULL ||
++          tp->udev->speed == USB_SPEED_LOW) {
++              /* rx share fifo credit near full threshold */
++              ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1,
++                              RXFIFO_THR2_FULL);
++              ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2,
++                              RXFIFO_THR3_FULL);
++      } else {
++              /* rx share fifo credit near full threshold */
++              ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1,
++                              RXFIFO_THR2_HIGH);
++              ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2,
++                              RXFIFO_THR3_HIGH);
++      }
++
++      /* TX share fifo free credit full threshold */
++      ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL);
++
++      ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD);
++      ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_HIGH);
++      ocp_write_dword(tp, MCU_TYPE_USB, USB_TX_DMA,
++                      TEST_MODE_DISABLE | TX_SIZE_ADJUST1);
++
++      rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
++
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
++      ocp_data |= TCR0_AUTO_FIFO;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data);
++}
++
++static void r8152b_enter_oob(struct r8152 *tp)
++{
++      u32 ocp_data;
++      int i;
++
++      ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++      ocp_data &= ~NOW_IS_OOB;
++      ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
++
++      ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_OOB);
++      ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_OOB);
++      ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_OOB);
++
++      rtl_disable(tp);
++
++      for (i = 0; i < 1000; i++) {
++              ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++              if (ocp_data & LINK_LIST_READY)
++                      break;
++              usleep_range(1000, 2000);
++      }
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
++      ocp_data |= RE_INIT_LL;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
++
++      for (i = 0; i < 1000; i++) {
++              ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++              if (ocp_data & LINK_LIST_READY)
++                      break;
++              usleep_range(1000, 2000);
++      }
++
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
++
++      rtl_rx_vlan_en(tp, true);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR);
++      ocp_data |= ALDPS_PROXY_MODE;
++      ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data);
++
++      ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++      ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
++      ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
++
++      rxdy_gated_en(tp, false);
++
++      ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
++      ocp_data |= RCR_APM | RCR_AM | RCR_AB;
++      ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
++}
++
++static void r8153_hw_phy_cfg(struct r8152 *tp)
++{
++      u32 ocp_data;
++      u16 data;
++
++      ocp_reg_write(tp, OCP_ADC_CFG, CKADSEL_L | ADC_EN | EN_EMI_L);
++      data = r8152_mdio_read(tp, MII_BMCR);
++      if (data & BMCR_PDOWN) {
++              data &= ~BMCR_PDOWN;
++              r8152_mdio_write(tp, MII_BMCR, data);
++      }
++
++      if (tp->version == RTL_VER_03) {
++              data = ocp_reg_read(tp, OCP_EEE_CFG);
++              data &= ~CTAP_SHORT_EN;
++              ocp_reg_write(tp, OCP_EEE_CFG, data);
++      }
++
++      data = ocp_reg_read(tp, OCP_POWER_CFG);
++      data |= EEE_CLKDIV_EN;
++      ocp_reg_write(tp, OCP_POWER_CFG, data);
++
++      data = ocp_reg_read(tp, OCP_DOWN_SPEED);
++      data |= EN_10M_BGOFF;
++      ocp_reg_write(tp, OCP_DOWN_SPEED, data);
++      data = ocp_reg_read(tp, OCP_POWER_CFG);
++      data |= EN_10M_PLLOFF;
++      ocp_reg_write(tp, OCP_POWER_CFG, data);
++      data = sram_read(tp, SRAM_IMPEDANCE);
++      data &= ~RX_DRIVING_MASK;
++      sram_write(tp, SRAM_IMPEDANCE, data);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
++      ocp_data |= PFM_PWM_SWITCH;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
++
++      data = sram_read(tp, SRAM_LPF_CFG);
++      data |= LPF_AUTO_TUNE;
++      sram_write(tp, SRAM_LPF_CFG, data);
++
++      data = sram_read(tp, SRAM_10M_AMP1);
++      data |= GDAC_IB_UPALL;
++      sram_write(tp, SRAM_10M_AMP1, data);
++      data = sram_read(tp, SRAM_10M_AMP2);
++      data |= AMP_DN;
++      sram_write(tp, SRAM_10M_AMP2, data);
++
++      set_bit(PHY_RESET, &tp->flags);
++}
++
++static void r8153_u1u2en(struct r8152 *tp, bool enable)
++{
++      u8 u1u2[8];
++
++      if (enable)
++              memset(u1u2, 0xff, sizeof(u1u2));
++      else
++              memset(u1u2, 0x00, sizeof(u1u2));
++
++      usb_ocp_write(tp, USB_TOLERANCE, BYTE_EN_SIX_BYTES, sizeof(u1u2), u1u2);
++}
++
++static void r8153_u2p3en(struct r8152 *tp, bool enable)
++{
++      u32 ocp_data;
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL);
++      if (enable)
++              ocp_data |= U2P3_ENABLE;
++      else
++              ocp_data &= ~U2P3_ENABLE;
++      ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
++}
++
++static void r8153_power_cut_en(struct r8152 *tp, bool enable)
++{
++      u32 ocp_data;
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT);
++      if (enable)
++              ocp_data |= PWR_EN | PHASE2_EN;
++      else
++              ocp_data &= ~(PWR_EN | PHASE2_EN);
++      ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
++      ocp_data &= ~PCUT_STATUS;
++      ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
++}
++
++static void r8153_first_init(struct r8152 *tp)
++{
++      u32 ocp_data;
++      int i;
++
++      rxdy_gated_en(tp, true);
++      r8153_teredo_off(tp);
++
++      ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
++      ocp_data &= ~RCR_ACPT_ALL;
++      ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
++
++      r8153_hw_phy_cfg(tp);
++
++      rtl8152_nic_reset(tp);
++
++      ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++      ocp_data &= ~NOW_IS_OOB;
++      ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
++      ocp_data &= ~MCU_BORW_EN;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
++
++      for (i = 0; i < 1000; i++) {
++              ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++              if (ocp_data & LINK_LIST_READY)
++                      break;
++              usleep_range(1000, 2000);
++      }
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
++      ocp_data |= RE_INIT_LL;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
++
++      for (i = 0; i < 1000; i++) {
++              ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++              if (ocp_data & LINK_LIST_READY)
++                      break;
++              usleep_range(1000, 2000);
++      }
++
++      rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
++
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8153_RMS);
++      ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
++      ocp_data |= TCR0_AUTO_FIFO;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data);
++
++      rtl8152_nic_reset(tp);
++
++      /* rx share fifo credit full threshold */
++      ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL);
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_NORMAL);
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_NORMAL);
++      /* TX share fifo free credit full threshold */
++      ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL2);
++
++      /* rx aggregation */
++      ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
++      ocp_data &= ~RX_AGG_DISABLE;
++      ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
++}
++
++static void r8153_enter_oob(struct r8152 *tp)
++{
++      u32 ocp_data;
++      int i;
++
++      ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++      ocp_data &= ~NOW_IS_OOB;
++      ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
++
++      rtl_disable(tp);
++
++      for (i = 0; i < 1000; i++) {
++              ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++              if (ocp_data & LINK_LIST_READY)
++                      break;
++              usleep_range(1000, 2000);
++      }
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
++      ocp_data |= RE_INIT_LL;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
++
++      for (i = 0; i < 1000; i++) {
++              ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++              if (ocp_data & LINK_LIST_READY)
++                      break;
++              usleep_range(1000, 2000);
++      }
++
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8153_RMS);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
++      ocp_data &= ~TEREDO_WAKE_MASK;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
++
++      rtl_rx_vlan_en(tp, true);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR);
++      ocp_data |= ALDPS_PROXY_MODE;
++      ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data);
++
++      ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++      ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
++      ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
++
++      rxdy_gated_en(tp, false);
++
++      ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
++      ocp_data |= RCR_APM | RCR_AM | RCR_AB;
++      ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
++}
++
++static void r8153_disable_aldps(struct r8152 *tp)
++{
++      u16 data;
++
++      data = ocp_reg_read(tp, OCP_POWER_CFG);
++      data &= ~EN_ALDPS;
++      ocp_reg_write(tp, OCP_POWER_CFG, data);
++      msleep(20);
++}
++
++static void r8153_enable_aldps(struct r8152 *tp)
++{
++      u16 data;
++
++      data = ocp_reg_read(tp, OCP_POWER_CFG);
++      data |= EN_ALDPS;
++      ocp_reg_write(tp, OCP_POWER_CFG, data);
++}
++
++static void rtl8153_disable(struct r8152 *tp)
++{
++      r8153_disable_aldps(tp);
++      rtl_disable(tp);
++      r8153_enable_aldps(tp);
++}
++
++static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
++{
++      u16 bmcr, anar, gbcr;
++      int ret = 0;
++
++      cancel_delayed_work_sync(&tp->schedule);
++      anar = r8152_mdio_read(tp, MII_ADVERTISE);
++      anar &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
++                ADVERTISE_100HALF | ADVERTISE_100FULL);
++      if (tp->mii.supports_gmii) {
++              gbcr = r8152_mdio_read(tp, MII_CTRL1000);
++              gbcr &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
++      } else {
++              gbcr = 0;
++      }
++
++      if (autoneg == AUTONEG_DISABLE) {
++              if (speed == SPEED_10) {
++                      bmcr = 0;
++                      anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
++              } else if (speed == SPEED_100) {
++                      bmcr = BMCR_SPEED100;
++                      anar |= ADVERTISE_100HALF | ADVERTISE_100FULL;
++              } else if (speed == SPEED_1000 && tp->mii.supports_gmii) {
++                      bmcr = BMCR_SPEED1000;
++                      gbcr |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
++              } else {
++                      ret = -EINVAL;
++                      goto out;
++              }
++
++              if (duplex == DUPLEX_FULL)
++                      bmcr |= BMCR_FULLDPLX;
++      } else {
++              if (speed == SPEED_10) {
++                      if (duplex == DUPLEX_FULL)
++                              anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
++                      else
++                              anar |= ADVERTISE_10HALF;
++              } else if (speed == SPEED_100) {
++                      if (duplex == DUPLEX_FULL) {
++                              anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
++                              anar |= ADVERTISE_100HALF | ADVERTISE_100FULL;
++                      } else {
++                              anar |= ADVERTISE_10HALF;
++                              anar |= ADVERTISE_100HALF;
++                      }
++              } else if (speed == SPEED_1000 && tp->mii.supports_gmii) {
++                      if (duplex == DUPLEX_FULL) {
++                              anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
++                              anar |= ADVERTISE_100HALF | ADVERTISE_100FULL;
++                              gbcr |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
++                      } else {
++                              anar |= ADVERTISE_10HALF;
++                              anar |= ADVERTISE_100HALF;
++                              gbcr |= ADVERTISE_1000HALF;
++                      }
++              } else {
++                      ret = -EINVAL;
++                      goto out;
++              }
++
++              bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
++      }
++
++      if (test_bit(PHY_RESET, &tp->flags))
++              bmcr |= BMCR_RESET;
++
++      if (tp->mii.supports_gmii)
++              r8152_mdio_write(tp, MII_CTRL1000, gbcr);
++
++      r8152_mdio_write(tp, MII_ADVERTISE, anar);
++      r8152_mdio_write(tp, MII_BMCR, bmcr);
++
++      if (test_bit(PHY_RESET, &tp->flags)) {
++              int i;
++
++              clear_bit(PHY_RESET, &tp->flags);
++              for (i = 0; i < 50; i++) {
++                      msleep(20);
++                      if ((r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET) == 0)
++                              break;
++              }
++      }
++
++out:
++
++      return ret;
++}
++
++static void rtl8152_up(struct r8152 *tp)
++{
++      if (test_bit(RTL8152_UNPLUG, &tp->flags))
++              return;
++
++      r8152b_disable_aldps(tp);
++      r8152b_exit_oob(tp);
++      r8152b_enable_aldps(tp);
++}
++
++static void rtl8152_down(struct r8152 *tp)
++{
++      if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
++              rtl_drop_queued_tx(tp);
++              return;
++      }
++
++      r8152_power_cut_en(tp, false);
++      r8152b_disable_aldps(tp);
++      r8152b_enter_oob(tp);
++      r8152b_enable_aldps(tp);
++}
++
++static void rtl8153_up(struct r8152 *tp)
++{
++      if (test_bit(RTL8152_UNPLUG, &tp->flags))
++              return;
++
++      r8153_disable_aldps(tp);
++      r8153_first_init(tp);
++      r8153_enable_aldps(tp);
++}
++
++static void rtl8153_down(struct r8152 *tp)
++{
++      if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
++              rtl_drop_queued_tx(tp);
++              return;
++      }
++
++      r8153_u1u2en(tp, false);
++      r8153_power_cut_en(tp, false);
++      r8153_disable_aldps(tp);
++      r8153_enter_oob(tp);
++      r8153_enable_aldps(tp);
++}
++
++static void set_carrier(struct r8152 *tp)
++{
++      struct net_device *netdev = tp->netdev;
++      u8 speed;
++
++      clear_bit(RTL8152_LINK_CHG, &tp->flags);
++      speed = rtl8152_get_speed(tp);
++
++      if (speed & LINK_STATUS) {
++              if (!(tp->speed & LINK_STATUS)) {
++                      tp->rtl_ops.enable(tp);
++                      set_bit(RTL8152_SET_RX_MODE, &tp->flags);
++                      netif_carrier_on(netdev);
++              }
++      } else {
++              if (tp->speed & LINK_STATUS) {
++                      netif_carrier_off(netdev);
++                      tasklet_disable(&tp->tl);
++                      tp->rtl_ops.disable(tp);
++                      tasklet_enable(&tp->tl);
++              }
++      }
++      tp->speed = speed;
++}
++
++static void rtl_work_func_t(struct work_struct *work)
++{
++      struct r8152 *tp = container_of(work, struct r8152, schedule.work);
++
++      if (usb_autopm_get_interface(tp->intf) < 0)
++              return;
++
++      if (!test_bit(WORK_ENABLE, &tp->flags))
++              goto out1;
++
++      if (test_bit(RTL8152_UNPLUG, &tp->flags))
++              goto out1;
++
++      if (!mutex_trylock(&tp->control)) {
++              schedule_delayed_work(&tp->schedule, 0);
++              goto out1;
++      }
++
++      if (test_bit(RTL8152_LINK_CHG, &tp->flags))
++              set_carrier(tp);
++
++      if (test_bit(RTL8152_SET_RX_MODE, &tp->flags))
++              _rtl8152_set_rx_mode(tp->netdev);
++
++      if (test_bit(SCHEDULE_TASKLET, &tp->flags) &&
++          (tp->speed & LINK_STATUS)) {
++              clear_bit(SCHEDULE_TASKLET, &tp->flags);
++              tasklet_schedule(&tp->tl);
++      }
++
++      if (test_bit(PHY_RESET, &tp->flags))
++              rtl_phy_reset(tp);
++
++      mutex_unlock(&tp->control);
++
++out1:
++      usb_autopm_put_interface(tp->intf);
++}
++
++static int rtl8152_open(struct net_device *netdev)
++{
++      struct r8152 *tp = netdev_priv(netdev);
++      int res = 0;
++
++      res = alloc_all_mem(tp);
++      if (res)
++              goto out;
++
++      /* set speed to 0 to avoid autoresume try to submit rx */
++      tp->speed = 0;
++
++      res = usb_autopm_get_interface(tp->intf);
++      if (res < 0) {
++              free_all_mem(tp);
++              goto out;
++      }
++
++      mutex_lock(&tp->control);
++
++      /* The WORK_ENABLE may be set when autoresume occurs */
++      if (test_bit(WORK_ENABLE, &tp->flags)) {
++              clear_bit(WORK_ENABLE, &tp->flags);
++              usb_kill_urb(tp->intr_urb);
++              cancel_delayed_work_sync(&tp->schedule);
++
++              /* disable the tx/rx, if the workqueue has enabled them. */
++              if (tp->speed & LINK_STATUS)
++                      tp->rtl_ops.disable(tp);
++      }
++
++      tp->rtl_ops.up(tp);
++
++      rtl8152_set_speed(tp, AUTONEG_ENABLE,
++                        tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
++                        DUPLEX_FULL);
++      tp->speed = 0;
++      netif_carrier_off(netdev);
++      netif_start_queue(netdev);
++      set_bit(WORK_ENABLE, &tp->flags);
++
++      res = usb_submit_urb(tp->intr_urb, GFP_KERNEL);
++      if (res) {
++              if (res == -ENODEV)
++                      netif_device_detach(tp->netdev);
++              netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n",
++                         res);
++              free_all_mem(tp);
++      }
++
++      mutex_unlock(&tp->control);
++
++      usb_autopm_put_interface(tp->intf);
++
++out:
++      return res;
++}
++
++static int rtl8152_close(struct net_device *netdev)
++{
++      struct r8152 *tp = netdev_priv(netdev);
++      int res = 0;
++
++      clear_bit(WORK_ENABLE, &tp->flags);
++      usb_kill_urb(tp->intr_urb);
++      cancel_delayed_work_sync(&tp->schedule);
++      netif_stop_queue(netdev);
++
++      res = usb_autopm_get_interface(tp->intf);
++      if (res < 0) {
++              rtl_drop_queued_tx(tp);
++      } else {
++              mutex_lock(&tp->control);
++
++              /* The autosuspend may have been enabled and wouldn't
++               * be disable when autoresume occurs, because the
++               * netif_running() would be false.
++               */
++              rtl_runtime_suspend_enable(tp, false);
++
++              tasklet_disable(&tp->tl);
++              tp->rtl_ops.down(tp);
++              tasklet_enable(&tp->tl);
++
++              mutex_unlock(&tp->control);
++
++              usb_autopm_put_interface(tp->intf);
++      }
++
++      free_all_mem(tp);
++
++      return res;
++}
++
++static inline void r8152_mmd_indirect(struct r8152 *tp, u16 dev, u16 reg)
++{
++      ocp_reg_write(tp, OCP_EEE_AR, FUN_ADDR | dev);
++      ocp_reg_write(tp, OCP_EEE_DATA, reg);
++      ocp_reg_write(tp, OCP_EEE_AR, FUN_DATA | dev);
++}
++
++static u16 r8152_mmd_read(struct r8152 *tp, u16 dev, u16 reg)
++{
++      u16 data;
++
++      r8152_mmd_indirect(tp, dev, reg);
++      data = ocp_reg_read(tp, OCP_EEE_DATA);
++      ocp_reg_write(tp, OCP_EEE_AR, 0x0000);
++
++      return data;
++}
++
++static void r8152_mmd_write(struct r8152 *tp, u16 dev, u16 reg, u16 data)
++{
++      r8152_mmd_indirect(tp, dev, reg);
++      ocp_reg_write(tp, OCP_EEE_DATA, data);
++      ocp_reg_write(tp, OCP_EEE_AR, 0x0000);
++}
++
++static void r8152_eee_en(struct r8152 *tp, bool enable)
++{
++      u16 config1, config2, config3;
++      u32 ocp_data;
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
++      config1 = ocp_reg_read(tp, OCP_EEE_CONFIG1) & ~sd_rise_time_mask;
++      config2 = ocp_reg_read(tp, OCP_EEE_CONFIG2);
++      config3 = ocp_reg_read(tp, OCP_EEE_CONFIG3) & ~fast_snr_mask;
++
++      if (enable) {
++              ocp_data |= EEE_RX_EN | EEE_TX_EN;
++              config1 |= EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN | RX_QUIET_EN;
++              config1 |= sd_rise_time(1);
++              config2 |= RG_DACQUIET_EN | RG_LDVQUIET_EN;
++              config3 |= fast_snr(42);
++      } else {
++              ocp_data &= ~(EEE_RX_EN | EEE_TX_EN);
++              config1 &= ~(EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN |
++                           RX_QUIET_EN);
++              config1 |= sd_rise_time(7);
++              config2 &= ~(RG_DACQUIET_EN | RG_LDVQUIET_EN);
++              config3 |= fast_snr(511);
++      }
++
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
++      ocp_reg_write(tp, OCP_EEE_CONFIG1, config1);
++      ocp_reg_write(tp, OCP_EEE_CONFIG2, config2);
++      ocp_reg_write(tp, OCP_EEE_CONFIG3, config3);
++}
++
++static void r8152b_enable_eee(struct r8152 *tp)
++{
++      r8152_eee_en(tp, true);
++      r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, MDIO_EEE_100TX);
++}
++
++static void r8153_eee_en(struct r8152 *tp, bool enable)
++{
++      u32 ocp_data;
++      u16 config;
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
++      config = ocp_reg_read(tp, OCP_EEE_CFG);
++
++      if (enable) {
++              ocp_data |= EEE_RX_EN | EEE_TX_EN;
++              config |= EEE10_EN;
++      } else {
++              ocp_data &= ~(EEE_RX_EN | EEE_TX_EN);
++              config &= ~EEE10_EN;
++      }
++
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
++      ocp_reg_write(tp, OCP_EEE_CFG, config);
++}
++
++static void r8153_enable_eee(struct r8152 *tp)
++{
++      r8153_eee_en(tp, true);
++      ocp_reg_write(tp, OCP_EEE_ADV, MDIO_EEE_1000T | MDIO_EEE_100TX);
++}
++
++static void r8152b_enable_fc(struct r8152 *tp)
++{
++      u16 anar;
++
++      anar = r8152_mdio_read(tp, MII_ADVERTISE);
++      anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
++      r8152_mdio_write(tp, MII_ADVERTISE, anar);
++}
++
++static void rtl_tally_reset(struct r8152 *tp)
++{
++      u32 ocp_data;
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY);
++      ocp_data |= TALLY_RESET;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
++}
++
++static void r8152b_init(struct r8152 *tp)
++{
++      u32 ocp_data;
++
++      if (test_bit(RTL8152_UNPLUG, &tp->flags))
++              return;
++
++      r8152b_disable_aldps(tp);
++
++      if (tp->version == RTL_VER_01) {
++              ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
++              ocp_data &= ~LED_MODE_MASK;
++              ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
++      }
++
++      r8152_power_cut_en(tp, false);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
++      ocp_data |= TX_10M_IDLE_EN | PFM_PWM_SWITCH;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
++      ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL);
++      ocp_data &= ~MCU_CLK_RATIO_MASK;
++      ocp_data |= MCU_CLK_RATIO | D3_CLK_GATED_EN;
++      ocp_write_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ocp_data);
++      ocp_data = GPHY_STS_MSK | SPEED_DOWN_MSK |
++                 SPDWN_RXDV_MSK | SPDWN_LINKCHG_MSK;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_GPHY_INTR_IMR, ocp_data);
++
++      r8152b_enable_eee(tp);
++      r8152b_enable_aldps(tp);
++      r8152b_enable_fc(tp);
++      rtl_tally_reset(tp);
++
++      /* enable rx aggregation */
++      ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
++      ocp_data &= ~RX_AGG_DISABLE;
++      ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
++}
++
++static void r8153_init(struct r8152 *tp)
++{
++      u32 ocp_data;
++      int i;
++
++      if (test_bit(RTL8152_UNPLUG, &tp->flags))
++              return;
++
++      r8153_disable_aldps(tp);
++      r8153_u1u2en(tp, false);
++
++      for (i = 0; i < 500; i++) {
++              if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
++                  AUTOLOAD_DONE)
++                      break;
++              msleep(20);
++      }
++
++      for (i = 0; i < 500; i++) {
++              ocp_data = ocp_reg_read(tp, OCP_PHY_STATUS) & PHY_STAT_MASK;
++              if (ocp_data == PHY_STAT_LAN_ON || ocp_data == PHY_STAT_PWRDN)
++                      break;
++              msleep(20);
++      }
++
++      r8153_u2p3en(tp, false);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL);
++      ocp_data &= ~TIMER11_EN;
++      ocp_write_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL, ocp_data);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
++      ocp_data &= ~LED_MODE_MASK;
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
++
++      ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_LPM_CTRL);
++      ocp_data &= ~LPM_TIMER_MASK;
++      if (tp->udev->speed == USB_SPEED_SUPER)
++              ocp_data |= LPM_TIMER_500US;
++      else
++              ocp_data |= LPM_TIMER_500MS;
++      ocp_write_byte(tp, MCU_TYPE_USB, USB_LPM_CTRL, ocp_data);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2);
++      ocp_data &= ~SEN_VAL_MASK;
++      ocp_data |= SEN_VAL_NORMAL | SEL_RXIDLE;
++      ocp_write_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2, ocp_data);
++
++      r8153_power_cut_en(tp, false);
++      r8153_u1u2en(tp, true);
++
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ALDPS_SPDWN_RATIO);
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, EEE_SPDWN_RATIO);
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3,
++                     PKT_AVAIL_SPDWN_EN | SUSPEND_SPDWN_EN |
++                     U1U2_SPDWN_EN | L1_SPDWN_EN);
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4,
++                     PWRSAVE_SPDWN_EN | RXDV_SPDWN_EN | TX10MIDLE_EN |
++                     TP100_SPDWN_EN | TP500_SPDWN_EN | TP1000_SPDWN_EN |
++                     EEE_SPDWN_EN);
++
++      r8153_enable_eee(tp);
++      r8153_enable_aldps(tp);
++      r8152b_enable_fc(tp);
++      rtl_tally_reset(tp);
++}
++
++static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
++{
++      struct r8152 *tp = usb_get_intfdata(intf);
++      struct net_device *netdev = tp->netdev;
++      int ret = 0;
++
++      mutex_lock(&tp->control);
++
++      if (PMSG_IS_AUTO(message)) {
++              if (netif_running(netdev) && work_busy(&tp->schedule.work)) {
++                      ret = -EBUSY;
++                      goto out1;
++              }
++
++              set_bit(SELECTIVE_SUSPEND, &tp->flags);
++      } else {
++              netif_device_detach(netdev);
++      }
++
++      if (netif_running(netdev) && test_bit(WORK_ENABLE, &tp->flags)) {
++              clear_bit(WORK_ENABLE, &tp->flags);
++              usb_kill_urb(tp->intr_urb);
++              tasklet_disable(&tp->tl);
++              if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
++                      rtl_stop_rx(tp);
++                      rtl_runtime_suspend_enable(tp, true);
++              } else {
++                      cancel_delayed_work_sync(&tp->schedule);
++                      tp->rtl_ops.down(tp);
++              }
++              tasklet_enable(&tp->tl);
++      }
++out1:
++      mutex_unlock(&tp->control);
++
++      return ret;
++}
++
++static int rtl8152_resume(struct usb_interface *intf)
++{
++      struct r8152 *tp = usb_get_intfdata(intf);
++
++      mutex_lock(&tp->control);
++
++      if (!test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
++              tp->rtl_ops.init(tp);
++              netif_device_attach(tp->netdev);
++      }
++
++      if (netif_running(tp->netdev)) {
++              if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
++                      rtl_runtime_suspend_enable(tp, false);
++                      clear_bit(SELECTIVE_SUSPEND, &tp->flags);
++                      set_bit(WORK_ENABLE, &tp->flags);
++                      if (tp->speed & LINK_STATUS)
++                              rtl_start_rx(tp);
++              } else {
++                      tp->rtl_ops.up(tp);
++                      rtl8152_set_speed(tp, AUTONEG_ENABLE,
++                                        tp->mii.supports_gmii ?
++                                        SPEED_1000 : SPEED_100,
++                                        DUPLEX_FULL);
++                      tp->speed = 0;
++                      netif_carrier_off(tp->netdev);
++                      set_bit(WORK_ENABLE, &tp->flags);
++              }
++              usb_submit_urb(tp->intr_urb, GFP_KERNEL);
++      } else if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
++              clear_bit(SELECTIVE_SUSPEND, &tp->flags);
++      }
++
++      mutex_unlock(&tp->control);
++
++      return 0;
++}
++
++static void rtl8152_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
++{
++      struct r8152 *tp = netdev_priv(dev);
++
++      if (usb_autopm_get_interface(tp->intf) < 0)
++              return;
++
++      mutex_lock(&tp->control);
++
++      wol->supported = WAKE_ANY;
++      wol->wolopts = __rtl_get_wol(tp);
++
++      mutex_unlock(&tp->control);
++
++      usb_autopm_put_interface(tp->intf);
++}
++
++static int rtl8152_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
++{
++      struct r8152 *tp = netdev_priv(dev);
++      int ret;
++
++      ret = usb_autopm_get_interface(tp->intf);
++      if (ret < 0)
++              goto out_set_wol;
++
++      mutex_lock(&tp->control);
++
++      __rtl_set_wol(tp, wol->wolopts);
++      tp->saved_wolopts = wol->wolopts & WAKE_ANY;
++
++      mutex_unlock(&tp->control);
++
++      usb_autopm_put_interface(tp->intf);
++
++out_set_wol:
++      return ret;
++}
++
++static u32 rtl8152_get_msglevel(struct net_device *dev)
++{
++      struct r8152 *tp = netdev_priv(dev);
++
++      return tp->msg_enable;
++}
++
++static void rtl8152_set_msglevel(struct net_device *dev, u32 value)
++{
++      struct r8152 *tp = netdev_priv(dev);
++
++      tp->msg_enable = value;
++}
++
++static void rtl8152_get_drvinfo(struct net_device *netdev,
++                              struct ethtool_drvinfo *info)
++{
++      struct r8152 *tp = netdev_priv(netdev);
++
++      strlcpy(info->driver, MODULENAME, sizeof(info->driver));
++      strlcpy(info->version, DRIVER_VERSION, sizeof(info->version));
++      usb_make_path(tp->udev, info->bus_info, sizeof(info->bus_info));
++}
++
++static
++int rtl8152_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
++{
++      struct r8152 *tp = netdev_priv(netdev);
++      int ret;
++
++      if (!tp->mii.mdio_read)
++              return -EOPNOTSUPP;
++
++      ret = usb_autopm_get_interface(tp->intf);
++      if (ret < 0)
++              goto out;
++
++      mutex_lock(&tp->control);
++
++      ret = mii_ethtool_gset(&tp->mii, cmd);
++
++      mutex_unlock(&tp->control);
++
++      usb_autopm_put_interface(tp->intf);
++
++out:
++      return ret;
++}
++
++static int rtl8152_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
++{
++      struct r8152 *tp = netdev_priv(dev);
++      int ret;
++
++      ret = usb_autopm_get_interface(tp->intf);
++      if (ret < 0)
++              goto out;
++
++      mutex_lock(&tp->control);
++
++      ret = rtl8152_set_speed(tp, cmd->autoneg, cmd->speed, cmd->duplex);
++
++      mutex_unlock(&tp->control);
++
++      usb_autopm_put_interface(tp->intf);
++
++out:
++      return ret;
++}
++
++static const char rtl8152_gstrings[][ETH_GSTRING_LEN] = {
++      "tx_packets",
++      "rx_packets",
++      "tx_errors",
++      "rx_errors",
++      "rx_missed",
++      "align_errors",
++      "tx_single_collisions",
++      "tx_multi_collisions",
++      "rx_unicast",
++      "rx_broadcast",
++      "rx_multicast",
++      "tx_aborted",
++      "tx_underrun",
++};
++
++static int rtl8152_get_sset_count(struct net_device *dev, int sset)
++{
++      switch (sset) {
++      case ETH_SS_STATS:
++              return ARRAY_SIZE(rtl8152_gstrings);
++      default:
++              return -EOPNOTSUPP;
++      }
++}
++
++static void rtl8152_get_ethtool_stats(struct net_device *dev,
++                                    struct ethtool_stats *stats, u64 *data)
++{
++      struct r8152 *tp = netdev_priv(dev);
++      struct tally_counter tally;
++
++      if (usb_autopm_get_interface(tp->intf) < 0)
++              return;
++
++      generic_ocp_read(tp, PLA_TALLYCNT, sizeof(tally), &tally, MCU_TYPE_PLA);
++
++      usb_autopm_put_interface(tp->intf);
++
++      data[0] = le64_to_cpu(tally.tx_packets);
++      data[1] = le64_to_cpu(tally.rx_packets);
++      data[2] = le64_to_cpu(tally.tx_errors);
++      data[3] = le32_to_cpu(tally.rx_errors);
++      data[4] = le16_to_cpu(tally.rx_missed);
++      data[5] = le16_to_cpu(tally.align_errors);
++      data[6] = le32_to_cpu(tally.tx_one_collision);
++      data[7] = le32_to_cpu(tally.tx_multi_collision);
++      data[8] = le64_to_cpu(tally.rx_unicast);
++      data[9] = le64_to_cpu(tally.rx_broadcast);
++      data[10] = le32_to_cpu(tally.rx_multicast);
++      data[11] = le16_to_cpu(tally.tx_aborted);
++      data[12] = le16_to_cpu(tally.tx_underun);
++}
++
++static void rtl8152_get_strings(struct net_device *dev, u32 stringset, u8 *data)
++{
++      switch (stringset) {
++      case ETH_SS_STATS:
++              memcpy(data, *rtl8152_gstrings, sizeof(rtl8152_gstrings));
++              break;
++      }
++}
++
++static int r8152_get_eee(struct r8152 *tp, struct ethtool_eee *eee)
++{
++      u32 ocp_data, lp, adv, supported = 0;
++      u16 val;
++
++      val = r8152_mmd_read(tp, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
++      supported = mmd_eee_cap_to_ethtool_sup_t(val);
++
++      val = r8152_mmd_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
++      adv = mmd_eee_adv_to_ethtool_adv_t(val);
++
++      val = r8152_mmd_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE);
++      lp = mmd_eee_adv_to_ethtool_adv_t(val);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
++      ocp_data &= EEE_RX_EN | EEE_TX_EN;
++
++      eee->eee_enabled = !!ocp_data;
++      eee->eee_active = !!(supported & adv & lp);
++      eee->supported = supported;
++      eee->advertised = adv;
++      eee->lp_advertised = lp;
++
++      return 0;
++}
++
++static int r8152_set_eee(struct r8152 *tp, struct ethtool_eee *eee)
++{
++      u16 val = ethtool_adv_to_mmd_eee_adv_t(eee->advertised);
++
++      r8152_eee_en(tp, eee->eee_enabled);
++
++      if (!eee->eee_enabled)
++              val = 0;
++
++      r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val);
++
++      return 0;
++}
++
++static int r8153_get_eee(struct r8152 *tp, struct ethtool_eee *eee)
++{
++      u32 ocp_data, lp, adv, supported = 0;
++      u16 val;
++
++      val = ocp_reg_read(tp, OCP_EEE_ABLE);
++      supported = mmd_eee_cap_to_ethtool_sup_t(val);
++
++      val = ocp_reg_read(tp, OCP_EEE_ADV);
++      adv = mmd_eee_adv_to_ethtool_adv_t(val);
++
++      val = ocp_reg_read(tp, OCP_EEE_LPABLE);
++      lp = mmd_eee_adv_to_ethtool_adv_t(val);
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
++      ocp_data &= EEE_RX_EN | EEE_TX_EN;
++
++      eee->eee_enabled = !!ocp_data;
++      eee->eee_active = !!(supported & adv & lp);
++      eee->supported = supported;
++      eee->advertised = adv;
++      eee->lp_advertised = lp;
++
++      return 0;
++}
++
++static int r8153_set_eee(struct r8152 *tp, struct ethtool_eee *eee)
++{
++      u16 val = ethtool_adv_to_mmd_eee_adv_t(eee->advertised);
++
++      r8153_eee_en(tp, eee->eee_enabled);
++
++      if (!eee->eee_enabled)
++              val = 0;
++
++      ocp_reg_write(tp, OCP_EEE_ADV, val);
++
++      return 0;
++}
++
++static int
++rtl_ethtool_get_eee(struct net_device *net, struct ethtool_eee *edata)
++{
++      struct r8152 *tp = netdev_priv(net);
++      int ret;
++
++      ret = usb_autopm_get_interface(tp->intf);
++      if (ret < 0)
++              goto out;
++
++      mutex_lock(&tp->control);
++
++      ret = tp->rtl_ops.eee_get(tp, edata);
++
++      mutex_unlock(&tp->control);
++
++      usb_autopm_put_interface(tp->intf);
++
++out:
++      return ret;
++}
++
++static int
++rtl_ethtool_set_eee(struct net_device *net, struct ethtool_eee *edata)
++{
++      struct r8152 *tp = netdev_priv(net);
++      int ret;
++
++      ret = usb_autopm_get_interface(tp->intf);
++      if (ret < 0)
++              goto out;
++
++      mutex_lock(&tp->control);
++
++      ret = tp->rtl_ops.eee_set(tp, edata);
++      if (!ret)
++              ret = mii_nway_restart(&tp->mii);
++
++      mutex_unlock(&tp->control);
++
++      usb_autopm_put_interface(tp->intf);
++
++out:
++      return ret;
++}
++
++static struct ethtool_ops ops = {
++      .get_drvinfo = rtl8152_get_drvinfo,
++      .get_settings = rtl8152_get_settings,
++      .set_settings = rtl8152_set_settings,
++      .get_link = ethtool_op_get_link,
++      .get_msglevel = rtl8152_get_msglevel,
++      .set_msglevel = rtl8152_set_msglevel,
++      .get_wol = rtl8152_get_wol,
++      .set_wol = rtl8152_set_wol,
++      .get_strings = rtl8152_get_strings,
++      .get_sset_count = rtl8152_get_sset_count,
++      .get_ethtool_stats = rtl8152_get_ethtool_stats,
++      .get_eee = rtl_ethtool_get_eee,
++      .set_eee = rtl_ethtool_set_eee,
++};
++
++static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
++{
++      struct r8152 *tp = netdev_priv(netdev);
++      struct mii_ioctl_data *data = if_mii(rq);
++      int res;
++
++      if (test_bit(RTL8152_UNPLUG, &tp->flags))
++              return -ENODEV;
++
++      res = usb_autopm_get_interface(tp->intf);
++      if (res < 0)
++              goto out;
++
++      switch (cmd) {
++      case SIOCGMIIPHY:
++              data->phy_id = R8152_PHY_ID; /* Internal PHY */
++              break;
++
++      case SIOCGMIIREG:
++              mutex_lock(&tp->control);
++              data->val_out = r8152_mdio_read(tp, data->reg_num);
++              mutex_unlock(&tp->control);
++              break;
++
++      case SIOCSMIIREG:
++              if (!capable(CAP_NET_ADMIN)) {
++                      res = -EPERM;
++                      break;
++              }
++              mutex_lock(&tp->control);
++              r8152_mdio_write(tp, data->reg_num, data->val_in);
++              mutex_unlock(&tp->control);
++              break;
++
++      default:
++              res = -EOPNOTSUPP;
++      }
++
++      usb_autopm_put_interface(tp->intf);
++
++out:
++      return res;
++}
++
++static int rtl8152_change_mtu(struct net_device *dev, int new_mtu)
++{
++      struct r8152 *tp = netdev_priv(dev);
++
++      switch (tp->version) {
++      case RTL_VER_01:
++      case RTL_VER_02:
++              return eth_change_mtu(dev, new_mtu);
++      default:
++              break;
++      }
++
++      if (new_mtu < 68 || new_mtu > RTL8153_MAX_MTU)
++              return -EINVAL;
++
++      dev->mtu = new_mtu;
++
++      return 0;
++}
++
++static const struct net_device_ops rtl8152_netdev_ops = {
++      .ndo_open               = rtl8152_open,
++      .ndo_stop               = rtl8152_close,
++      .ndo_do_ioctl           = rtl8152_ioctl,
++      .ndo_start_xmit         = rtl8152_start_xmit,
++      .ndo_tx_timeout         = rtl8152_tx_timeout,
++      .ndo_set_features       = rtl8152_set_features,
++      .ndo_set_rx_mode        = rtl8152_set_rx_mode,
++      .ndo_set_mac_address    = rtl8152_set_mac_address,
++      .ndo_change_mtu         = rtl8152_change_mtu,
++      .ndo_validate_addr      = eth_validate_addr,
++};
++
++static void r8152b_get_version(struct r8152 *tp)
++{
++      u32     ocp_data;
++      u16     version;
++
++      ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR1);
++      version = (u16)(ocp_data & VERSION_MASK);
++
++      switch (version) {
++      case 0x4c00:
++              tp->version = RTL_VER_01;
++              break;
++      case 0x4c10:
++              tp->version = RTL_VER_02;
++              break;
++      case 0x5c00:
++              tp->version = RTL_VER_03;
++              tp->mii.supports_gmii = 1;
++              break;
++      case 0x5c10:
++              tp->version = RTL_VER_04;
++              tp->mii.supports_gmii = 1;
++              break;
++      case 0x5c20:
++              tp->version = RTL_VER_05;
++              tp->mii.supports_gmii = 1;
++              break;
++      default:
++              netif_info(tp, probe, tp->netdev,
++                         "Unknown version 0x%04x\n", version);
++              break;
++      }
++}
++
++static void rtl8152_unload(struct r8152 *tp)
++{
++      if (test_bit(RTL8152_UNPLUG, &tp->flags))
++              return;
++
++      if (tp->version != RTL_VER_01)
++              r8152_power_cut_en(tp, true);
++}
++
++static void rtl8153_unload(struct r8152 *tp)
++{
++      if (test_bit(RTL8152_UNPLUG, &tp->flags))
++              return;
++
++      r8153_power_cut_en(tp, false);
++}
++
++static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id)
++{
++      struct rtl_ops *ops = &tp->rtl_ops;
++      int ret = -ENODEV;
++
++      switch (id->idVendor) {
++      case VENDOR_ID_REALTEK:
++              switch (id->idProduct) {
++              case PRODUCT_ID_RTL8152:
++                      ops->init               = r8152b_init;
++                      ops->enable             = rtl8152_enable;
++                      ops->disable            = rtl8152_disable;
++                      ops->up                 = rtl8152_up;
++                      ops->down               = rtl8152_down;
++                      ops->unload             = rtl8152_unload;
++                      ops->eee_get            = r8152_get_eee;
++                      ops->eee_set            = r8152_set_eee;
++                      ret = 0;
++                      break;
++              case PRODUCT_ID_RTL8153:
++                      ops->init               = r8153_init;
++                      ops->enable             = rtl8153_enable;
++                      ops->disable            = rtl8153_disable;
++                      ops->up                 = rtl8153_up;
++                      ops->down               = rtl8153_down;
++                      ops->unload             = rtl8153_unload;
++                      ops->eee_get            = r8153_get_eee;
++                      ops->eee_set            = r8153_set_eee;
++                      ret = 0;
++                      break;
++              default:
++                      break;
++              }
++              break;
++
++      case VENDOR_ID_SAMSUNG:
++              switch (id->idProduct) {
++              case PRODUCT_ID_SAMSUNG:
++                      ops->init               = r8153_init;
++                      ops->enable             = rtl8153_enable;
++                      ops->disable            = rtl8153_disable;
++                      ops->up                 = rtl8153_up;
++                      ops->down               = rtl8153_down;
++                      ops->unload             = rtl8153_unload;
++                      ops->eee_get            = r8153_get_eee;
++                      ops->eee_set            = r8153_set_eee;
++                      ret = 0;
++                      break;
++              default:
++                      break;
++              }
++              break;
++
++      default:
++              break;
++      }
++
++      if (ret)
++              netif_err(tp, probe, tp->netdev, "Unknown Device\n");
++
++      return ret;
++}
++
++static int rtl8152_probe(struct usb_interface *intf,
++                       const struct usb_device_id *id)
++{
++      struct usb_device *udev = interface_to_usbdev(intf);
++      struct r8152 *tp;
++      struct net_device *netdev;
++      int ret;
++
++      if (udev->actconfig->desc.bConfigurationValue != 1) {
++              usb_driver_set_configuration(udev, 1);
++              return -ENODEV;
++      }
++
++      usb_reset_device(udev);
++      netdev = alloc_etherdev(sizeof(struct r8152));
++      if (!netdev) {
++              dev_err(&intf->dev, "Out of memory\n");
++              return -ENOMEM;
++      }
++
++      SET_NETDEV_DEV(netdev, &intf->dev);
++      tp = netdev_priv(netdev);
++      tp->msg_enable = 0x7FFF;
++
++      tp->udev = udev;
++      tp->netdev = netdev;
++      tp->intf = intf;
++
++      ret = rtl_ops_init(tp, id);
++      if (ret)
++              goto out;
++
++      tasklet_init(&tp->tl, bottom_half, (unsigned long)tp);
++      mutex_init(&tp->control);
++      INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
++
++      netdev->netdev_ops = &rtl8152_netdev_ops;
++      netdev->watchdog_timeo = RTL8152_TX_TIMEOUT;
++
++      netdev->features |= NETIF_F_RXCSUM | NETIF_F_IP_CSUM | NETIF_F_SG |
++                          NETIF_F_TSO | NETIF_F_FRAGLIST | NETIF_F_IPV6_CSUM |
++                          NETIF_F_TSO6 | NETIF_F_HW_VLAN_CTAG_RX |
++                          NETIF_F_HW_VLAN_CTAG_TX;
++      netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM | NETIF_F_SG |
++                            NETIF_F_TSO | NETIF_F_FRAGLIST |
++                            NETIF_F_IPV6_CSUM | NETIF_F_TSO6 |
++                            NETIF_F_HW_VLAN_CTAG_RX |
++                            NETIF_F_HW_VLAN_CTAG_TX;
++      netdev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
++                              NETIF_F_HIGHDMA | NETIF_F_FRAGLIST |
++                              NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
++
++      netdev->ethtool_ops = &ops;
++      netif_set_gso_max_size(netdev, RTL_LIMITED_TSO_SIZE);
++
++      tp->mii.dev = netdev;
++      tp->mii.mdio_read = read_mii_word;
++      tp->mii.mdio_write = write_mii_word;
++      tp->mii.phy_id_mask = 0x3f;
++      tp->mii.reg_num_mask = 0x1f;
++      tp->mii.phy_id = R8152_PHY_ID;
++      tp->mii.supports_gmii = 0;
++
++      intf->needs_remote_wakeup = 1;
++
++      r8152b_get_version(tp);
++      tp->rtl_ops.init(tp);
++      set_ethernet_addr(tp);
++
++      usb_set_intfdata(intf, tp);
++
++      ret = register_netdev(netdev);
++      if (ret != 0) {
++              netif_err(tp, probe, netdev, "couldn't register the device\n");
++              goto out1;
++      }
++
++      tp->saved_wolopts = __rtl_get_wol(tp);
++      if (tp->saved_wolopts)
++              device_set_wakeup_enable(&udev->dev, true);
++      else
++              device_set_wakeup_enable(&udev->dev, false);
++
++      netif_info(tp, probe, netdev, "%s\n", DRIVER_VERSION);
++
++      return 0;
++
++out1:
++      usb_set_intfdata(intf, NULL);
++out:
++      free_netdev(netdev);
++      return ret;
++}
++
++static void rtl8152_disconnect(struct usb_interface *intf)
++{
++      struct r8152 *tp = usb_get_intfdata(intf);
++
++      usb_set_intfdata(intf, NULL);
++      if (tp) {
++              struct usb_device *udev = tp->udev;
++
++              if (udev->state == USB_STATE_NOTATTACHED)
++                      set_bit(RTL8152_UNPLUG, &tp->flags);
++
++              tasklet_kill(&tp->tl);
++              unregister_netdev(tp->netdev);
++              tp->rtl_ops.unload(tp);
++              free_netdev(tp->netdev);
++      }
++}
++
++/* table of devices that work with this driver */
++static struct usb_device_id rtl8152_table[] = {
++      {USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8152)},
++      {USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8153)},
++      {USB_DEVICE(VENDOR_ID_SAMSUNG, PRODUCT_ID_SAMSUNG)},
++      {}
++};
++
++MODULE_DEVICE_TABLE(usb, rtl8152_table);
++
++static struct usb_driver rtl8152_driver = {
++      .name =         MODULENAME,
++      .id_table =     rtl8152_table,
++      .probe =        rtl8152_probe,
++      .disconnect =   rtl8152_disconnect,
++      .suspend =      rtl8152_suspend,
++      .resume =       rtl8152_resume,
++      .reset_resume = rtl8152_resume,
++      .supports_autosuspend = 1,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(rtl8152_driver);
++
++MODULE_AUTHOR(DRIVER_AUTHOR);
++MODULE_DESCRIPTION(DRIVER_DESC);
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/rtl8150.c backports-3.18.1-1/drivers/net/usb/rtl8150.c
+--- backports-3.18.1-1.org/drivers/net/usb/rtl8150.c   1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/rtl8150.c       2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,950 @@
++/*
++ *  Copyright (c) 2002 Petko Manolov (petkan@users.sourceforge.net)
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ */
++
++#include <linux/signal.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/mii.h>
++#include <linux/ethtool.h>
++#include <linux/usb.h>
++#include <asm/uaccess.h>
++
++/* Version Information */
++#define DRIVER_VERSION "v0.6.2 (2004/08/27)"
++#define DRIVER_AUTHOR "Petko Manolov <petkan@users.sourceforge.net>"
++#define DRIVER_DESC "rtl8150 based usb-ethernet driver"
++
++#define       IDR                     0x0120
++#define       MAR                     0x0126
++#define       CR                      0x012e
++#define       TCR                     0x012f
++#define       RCR                     0x0130
++#define       TSR                     0x0132
++#define       RSR                     0x0133
++#define       CON0                    0x0135
++#define       CON1                    0x0136
++#define       MSR                     0x0137
++#define       PHYADD                  0x0138
++#define       PHYDAT                  0x0139
++#define       PHYCNT                  0x013b
++#define       GPPC                    0x013d
++#define       BMCR                    0x0140
++#define       BMSR                    0x0142
++#define       ANAR                    0x0144
++#define       ANLP                    0x0146
++#define       AER                     0x0148
++#define CSCR                  0x014C  /* This one has the link status */
++#define CSCR_LINK_STATUS      (1 << 3)
++
++#define       IDR_EEPROM              0x1202
++
++#define       PHY_READ                0
++#define       PHY_WRITE               0x20
++#define       PHY_GO                  0x40
++
++#define       MII_TIMEOUT             10
++#define       INTBUFSIZE              8
++
++#define       RTL8150_REQT_READ       0xc0
++#define       RTL8150_REQT_WRITE      0x40
++#define       RTL8150_REQ_GET_REGS    0x05
++#define       RTL8150_REQ_SET_REGS    0x05
++
++
++/* Transmit status register errors */
++#define TSR_ECOL              (1<<5)
++#define TSR_LCOL              (1<<4)
++#define TSR_LOSS_CRS          (1<<3)
++#define TSR_JBR                       (1<<2)
++#define TSR_ERRORS            (TSR_ECOL | TSR_LCOL | TSR_LOSS_CRS | TSR_JBR)
++/* Receive status register errors */
++#define RSR_CRC                       (1<<2)
++#define RSR_FAE                       (1<<1)
++#define RSR_ERRORS            (RSR_CRC | RSR_FAE)
++
++/* Media status register definitions */
++#define MSR_DUPLEX            (1<<4)
++#define MSR_SPEED             (1<<3)
++#define MSR_LINK              (1<<2)
++
++/* Interrupt pipe data */
++#define INT_TSR                       0x00
++#define INT_RSR                       0x01
++#define INT_MSR                       0x02
++#define INT_WAKSR             0x03
++#define INT_TXOK_CNT          0x04
++#define INT_RXLOST_CNT                0x05
++#define INT_CRERR_CNT         0x06
++#define INT_COL_CNT           0x07
++
++
++#define       RTL8150_MTU             1540
++#define       RTL8150_TX_TIMEOUT      (HZ)
++#define       RX_SKB_POOL_SIZE        4
++
++/* rtl8150 flags */
++#define       RTL8150_HW_CRC          0
++#define       RX_REG_SET              1
++#define       RTL8150_UNPLUG          2
++#define       RX_URB_FAIL             3
++
++/* Define these values to match your device */
++#define       VENDOR_ID_REALTEK               0x0bda
++#define       VENDOR_ID_MELCO                 0x0411
++#define       VENDOR_ID_MICRONET              0x3980
++#define       VENDOR_ID_LONGSHINE             0x07b8
++#define       VENDOR_ID_OQO                   0x1557
++#define       VENDOR_ID_ZYXEL                 0x0586
++
++#define PRODUCT_ID_RTL8150            0x8150
++#define       PRODUCT_ID_LUAKTX               0x0012
++#define       PRODUCT_ID_LCS8138TX            0x401a
++#define PRODUCT_ID_SP128AR            0x0003
++#define       PRODUCT_ID_PRESTIGE             0x401a
++
++#undef        EEPROM_WRITE
++
++/* table of devices that work with this driver */
++static struct usb_device_id rtl8150_table[] = {
++      {USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8150)},
++      {USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)},
++      {USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)},
++      {USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)},
++      {USB_DEVICE(VENDOR_ID_OQO, PRODUCT_ID_RTL8150)},
++      {USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)},
++      {}
++};
++
++MODULE_DEVICE_TABLE(usb, rtl8150_table);
++
++struct rtl8150 {
++      unsigned long flags;
++      struct usb_device *udev;
++      struct tasklet_struct tl;
++      struct net_device *netdev;
++      struct urb *rx_urb, *tx_urb, *intr_urb;
++      struct sk_buff *tx_skb, *rx_skb;
++      struct sk_buff *rx_skb_pool[RX_SKB_POOL_SIZE];
++      spinlock_t rx_pool_lock;
++      struct usb_ctrlrequest dr;
++      int intr_interval;
++      u8 *intr_buff;
++      u8 phy;
++};
++
++typedef struct rtl8150 rtl8150_t;
++
++struct async_req {
++      struct usb_ctrlrequest dr;
++      u16 rx_creg;
++};
++
++static const char driver_name [] = "rtl8150";
++
++/*
++**
++**    device related part of the code
++**
++*/
++static int get_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
++{
++      return usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
++                             RTL8150_REQ_GET_REGS, RTL8150_REQT_READ,
++                             indx, 0, data, size, 500);
++}
++
++static int set_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
++{
++      return usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
++                             RTL8150_REQ_SET_REGS, RTL8150_REQT_WRITE,
++                             indx, 0, data, size, 500);
++}
++
++static void async_set_reg_cb(struct urb *urb)
++{
++      struct async_req *req = (struct async_req *)urb->context;
++      int status = urb->status;
++
++      if (status < 0)
++              dev_dbg(&urb->dev->dev, "%s failed with %d", __func__, status);
++      kfree(req);
++      usb_free_urb(urb);
++}
++
++static int async_set_registers(rtl8150_t *dev, u16 indx, u16 size, u16 reg)
++{
++      int res = -ENOMEM;
++      struct urb *async_urb;
++      struct async_req *req;
++
++      req = kmalloc(sizeof(struct async_req), GFP_ATOMIC);
++      if (req == NULL)
++              return res;
++      async_urb = usb_alloc_urb(0, GFP_ATOMIC);
++      if (async_urb == NULL) {
++              kfree(req);
++              return res;
++      }
++      req->rx_creg = cpu_to_le16(reg);
++      req->dr.bRequestType = RTL8150_REQT_WRITE;
++      req->dr.bRequest = RTL8150_REQ_SET_REGS;
++      req->dr.wIndex = 0;
++      req->dr.wValue = cpu_to_le16(indx);
++      req->dr.wLength = cpu_to_le16(size);
++      usb_fill_control_urb(async_urb, dev->udev,
++                           usb_sndctrlpipe(dev->udev, 0), (void *)&req->dr,
++                           &req->rx_creg, size, async_set_reg_cb, req);
++      res = usb_submit_urb(async_urb, GFP_ATOMIC);
++      if (res) {
++              if (res == -ENODEV)
++                      netif_device_detach(dev->netdev);
++              dev_err(&dev->udev->dev, "%s failed with %d\n", __func__, res);
++      }
++      return res;
++}
++
++static int read_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 * reg)
++{
++      int i;
++      u8 data[3], tmp;
++
++      data[0] = phy;
++      data[1] = data[2] = 0;
++      tmp = indx | PHY_READ | PHY_GO;
++      i = 0;
++
++      set_registers(dev, PHYADD, sizeof(data), data);
++      set_registers(dev, PHYCNT, 1, &tmp);
++      do {
++              get_registers(dev, PHYCNT, 1, data);
++      } while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT));
++
++      if (i <= MII_TIMEOUT) {
++              get_registers(dev, PHYDAT, 2, data);
++              *reg = data[0] | (data[1] << 8);
++              return 0;
++      } else
++              return 1;
++}
++
++static int write_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 reg)
++{
++      int i;
++      u8 data[3], tmp;
++
++      data[0] = phy;
++      data[1] = reg & 0xff;
++      data[2] = (reg >> 8) & 0xff;
++      tmp = indx | PHY_WRITE | PHY_GO;
++      i = 0;
++
++      set_registers(dev, PHYADD, sizeof(data), data);
++      set_registers(dev, PHYCNT, 1, &tmp);
++      do {
++              get_registers(dev, PHYCNT, 1, data);
++      } while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT));
++
++      if (i <= MII_TIMEOUT)
++              return 0;
++      else
++              return 1;
++}
++
++static inline void set_ethernet_addr(rtl8150_t * dev)
++{
++      u8 node_id[6];
++
++      get_registers(dev, IDR, sizeof(node_id), node_id);
++      memcpy(dev->netdev->dev_addr, node_id, sizeof(node_id));
++}
++
++static int rtl8150_set_mac_address(struct net_device *netdev, void *p)
++{
++      struct sockaddr *addr = p;
++      rtl8150_t *dev = netdev_priv(netdev);
++
++      if (netif_running(netdev))
++              return -EBUSY;
++
++      memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
++      netdev_dbg(netdev, "Setting MAC address to %pM\n", netdev->dev_addr);
++      /* Set the IDR registers. */
++      set_registers(dev, IDR, netdev->addr_len, netdev->dev_addr);
++#ifdef EEPROM_WRITE
++      {
++      int i;
++      u8 cr;
++      /* Get the CR contents. */
++      get_registers(dev, CR, 1, &cr);
++      /* Set the WEPROM bit (eeprom write enable). */
++      cr |= 0x20;
++      set_registers(dev, CR, 1, &cr);
++      /* Write the MAC address into eeprom. Eeprom writes must be word-sized,
++         so we need to split them up. */
++      for (i = 0; i * 2 < netdev->addr_len; i++) {
++              set_registers(dev, IDR_EEPROM + (i * 2), 2,
++              netdev->dev_addr + (i * 2));
++      }
++      /* Clear the WEPROM bit (preventing accidental eeprom writes). */
++      cr &= 0xdf;
++      set_registers(dev, CR, 1, &cr);
++      }
++#endif
++      return 0;
++}
++
++static int rtl8150_reset(rtl8150_t * dev)
++{
++      u8 data = 0x10;
++      int i = HZ;
++
++      set_registers(dev, CR, 1, &data);
++      do {
++              get_registers(dev, CR, 1, &data);
++      } while ((data & 0x10) && --i);
++
++      return (i > 0) ? 1 : 0;
++}
++
++static int alloc_all_urbs(rtl8150_t * dev)
++{
++      dev->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
++      if (!dev->rx_urb)
++              return 0;
++      dev->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
++      if (!dev->tx_urb) {
++              usb_free_urb(dev->rx_urb);
++              return 0;
++      }
++      dev->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
++      if (!dev->intr_urb) {
++              usb_free_urb(dev->rx_urb);
++              usb_free_urb(dev->tx_urb);
++              return 0;
++      }
++
++      return 1;
++}
++
++static void free_all_urbs(rtl8150_t * dev)
++{
++      usb_free_urb(dev->rx_urb);
++      usb_free_urb(dev->tx_urb);
++      usb_free_urb(dev->intr_urb);
++}
++
++static void unlink_all_urbs(rtl8150_t * dev)
++{
++      usb_kill_urb(dev->rx_urb);
++      usb_kill_urb(dev->tx_urb);
++      usb_kill_urb(dev->intr_urb);
++}
++
++static inline struct sk_buff *pull_skb(rtl8150_t *dev)
++{
++      struct sk_buff *skb;
++      int i;
++
++      for (i = 0; i < RX_SKB_POOL_SIZE; i++) {
++              if (dev->rx_skb_pool[i]) {
++                      skb = dev->rx_skb_pool[i];
++                      dev->rx_skb_pool[i] = NULL;
++                      return skb;
++              }
++      }
++      return NULL;
++}
++
++static void read_bulk_callback(struct urb *urb)
++{
++      rtl8150_t *dev;
++      unsigned pkt_len, res;
++      struct sk_buff *skb;
++      struct net_device *netdev;
++      u16 rx_stat;
++      int status = urb->status;
++      int result;
++
++      dev = urb->context;
++      if (!dev)
++              return;
++      if (test_bit(RTL8150_UNPLUG, &dev->flags))
++              return;
++      netdev = dev->netdev;
++      if (!netif_device_present(netdev))
++              return;
++
++      switch (status) {
++      case 0:
++              break;
++      case -ENOENT:
++              return; /* the urb is in unlink state */
++      case -ETIME:
++              if (printk_ratelimit())
++                      dev_warn(&urb->dev->dev, "may be reset is needed?..\n");
++              goto goon;
++      default:
++              if (printk_ratelimit())
++                      dev_warn(&urb->dev->dev, "Rx status %d\n", status);
++              goto goon;
++      }
++
++      if (!dev->rx_skb)
++              goto resched;
++      /* protect against short packets (tell me why we got some?!?) */
++      if (urb->actual_length < 4)
++              goto goon;
++
++      res = urb->actual_length;
++      rx_stat = le16_to_cpu(*(__le16 *)(urb->transfer_buffer + res - 4));
++      pkt_len = res - 4;
++
++      skb_put(dev->rx_skb, pkt_len);
++      dev->rx_skb->protocol = eth_type_trans(dev->rx_skb, netdev);
++      netif_rx(dev->rx_skb);
++      netdev->stats.rx_packets++;
++      netdev->stats.rx_bytes += pkt_len;
++
++      spin_lock(&dev->rx_pool_lock);
++      skb = pull_skb(dev);
++      spin_unlock(&dev->rx_pool_lock);
++      if (!skb)
++              goto resched;
++
++      dev->rx_skb = skb;
++goon:
++      usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
++                    dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
++      result = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
++      if (result == -ENODEV)
++              netif_device_detach(dev->netdev);
++      else if (result) {
++              set_bit(RX_URB_FAIL, &dev->flags);
++              goto resched;
++      } else {
++              clear_bit(RX_URB_FAIL, &dev->flags);
++      }
++
++      return;
++resched:
++      tasklet_schedule(&dev->tl);
++}
++
++static void write_bulk_callback(struct urb *urb)
++{
++      rtl8150_t *dev;
++      int status = urb->status;
++
++      dev = urb->context;
++      if (!dev)
++              return;
++      dev_kfree_skb_irq(dev->tx_skb);
++      if (!netif_device_present(dev->netdev))
++              return;
++      if (status)
++              dev_info(&urb->dev->dev, "%s: Tx status %d\n",
++                       dev->netdev->name, status);
++      dev->netdev->trans_start = jiffies;
++      netif_wake_queue(dev->netdev);
++}
++
++static void intr_callback(struct urb *urb)
++{
++      rtl8150_t *dev;
++      __u8 *d;
++      int status = urb->status;
++      int res;
++
++      dev = urb->context;
++      if (!dev)
++              return;
++      switch (status) {
++      case 0:                 /* success */
++              break;
++      case -ECONNRESET:       /* unlink */
++      case -ENOENT:
++      case -ESHUTDOWN:
++              return;
++      /* -EPIPE:  should clear the halt */
++      default:
++              dev_info(&urb->dev->dev, "%s: intr status %d\n",
++                       dev->netdev->name, status);
++              goto resubmit;
++      }
++
++      d = urb->transfer_buffer;
++      if (d[0] & TSR_ERRORS) {
++              dev->netdev->stats.tx_errors++;
++              if (d[INT_TSR] & (TSR_ECOL | TSR_JBR))
++                      dev->netdev->stats.tx_aborted_errors++;
++              if (d[INT_TSR] & TSR_LCOL)
++                      dev->netdev->stats.tx_window_errors++;
++              if (d[INT_TSR] & TSR_LOSS_CRS)
++                      dev->netdev->stats.tx_carrier_errors++;
++      }
++      /* Report link status changes to the network stack */
++      if ((d[INT_MSR] & MSR_LINK) == 0) {
++              if (netif_carrier_ok(dev->netdev)) {
++                      netif_carrier_off(dev->netdev);
++                      netdev_dbg(dev->netdev, "%s: LINK LOST\n", __func__);
++              }
++      } else {
++              if (!netif_carrier_ok(dev->netdev)) {
++                      netif_carrier_on(dev->netdev);
++                      netdev_dbg(dev->netdev, "%s: LINK CAME BACK\n", __func__);
++              }
++      }
++
++resubmit:
++      res = usb_submit_urb (urb, GFP_ATOMIC);
++      if (res == -ENODEV)
++              netif_device_detach(dev->netdev);
++      else if (res)
++              dev_err(&dev->udev->dev,
++                      "can't resubmit intr, %s-%s/input0, status %d\n",
++                      dev->udev->bus->bus_name, dev->udev->devpath, res);
++}
++
++static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message)
++{
++      rtl8150_t *dev = usb_get_intfdata(intf);
++
++      netif_device_detach(dev->netdev);
++
++      if (netif_running(dev->netdev)) {
++              usb_kill_urb(dev->rx_urb);
++              usb_kill_urb(dev->intr_urb);
++      }
++      return 0;
++}
++
++static int rtl8150_resume(struct usb_interface *intf)
++{
++      rtl8150_t *dev = usb_get_intfdata(intf);
++
++      netif_device_attach(dev->netdev);
++      if (netif_running(dev->netdev)) {
++              dev->rx_urb->status = 0;
++              dev->rx_urb->actual_length = 0;
++              read_bulk_callback(dev->rx_urb);
++
++              dev->intr_urb->status = 0;
++              dev->intr_urb->actual_length = 0;
++              intr_callback(dev->intr_urb);
++      }
++      return 0;
++}
++
++/*
++**
++**    network related part of the code
++**
++*/
++
++static void fill_skb_pool(rtl8150_t *dev)
++{
++      struct sk_buff *skb;
++      int i;
++
++      for (i = 0; i < RX_SKB_POOL_SIZE; i++) {
++              if (dev->rx_skb_pool[i])
++                      continue;
++              skb = dev_alloc_skb(RTL8150_MTU + 2);
++              if (!skb) {
++                      return;
++              }
++              skb_reserve(skb, 2);
++              dev->rx_skb_pool[i] = skb;
++      }
++}
++
++static void free_skb_pool(rtl8150_t *dev)
++{
++      int i;
++
++      for (i = 0; i < RX_SKB_POOL_SIZE; i++)
++              if (dev->rx_skb_pool[i])
++                      dev_kfree_skb(dev->rx_skb_pool[i]);
++}
++
++static void rx_fixup(unsigned long data)
++{
++      struct rtl8150 *dev = (struct rtl8150 *)data;
++      struct sk_buff *skb;
++      int status;
++
++      spin_lock_irq(&dev->rx_pool_lock);
++      fill_skb_pool(dev);
++      spin_unlock_irq(&dev->rx_pool_lock);
++      if (test_bit(RX_URB_FAIL, &dev->flags))
++              if (dev->rx_skb)
++                      goto try_again;
++      spin_lock_irq(&dev->rx_pool_lock);
++      skb = pull_skb(dev);
++      spin_unlock_irq(&dev->rx_pool_lock);
++      if (skb == NULL)
++              goto tlsched;
++      dev->rx_skb = skb;
++      usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
++                    dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
++try_again:
++      status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
++      if (status == -ENODEV) {
++              netif_device_detach(dev->netdev);
++      } else if (status) {
++              set_bit(RX_URB_FAIL, &dev->flags);
++              goto tlsched;
++      } else {
++              clear_bit(RX_URB_FAIL, &dev->flags);
++      }
++
++      return;
++tlsched:
++      tasklet_schedule(&dev->tl);
++}
++
++static int enable_net_traffic(rtl8150_t * dev)
++{
++      u8 cr, tcr, rcr, msr;
++
++      if (!rtl8150_reset(dev)) {
++              dev_warn(&dev->udev->dev, "device reset failed\n");
++      }
++      /* RCR bit7=1 attach Rx info at the end;  =0 HW CRC (which is broken) */
++      rcr = 0x9e;
++      tcr = 0xd8;
++      cr = 0x0c;
++      if (!(rcr & 0x80))
++              set_bit(RTL8150_HW_CRC, &dev->flags);
++      set_registers(dev, RCR, 1, &rcr);
++      set_registers(dev, TCR, 1, &tcr);
++      set_registers(dev, CR, 1, &cr);
++      get_registers(dev, MSR, 1, &msr);
++
++      return 0;
++}
++
++static void disable_net_traffic(rtl8150_t * dev)
++{
++      u8 cr;
++
++      get_registers(dev, CR, 1, &cr);
++      cr &= 0xf3;
++      set_registers(dev, CR, 1, &cr);
++}
++
++static void rtl8150_tx_timeout(struct net_device *netdev)
++{
++      rtl8150_t *dev = netdev_priv(netdev);
++      dev_warn(&netdev->dev, "Tx timeout.\n");
++      usb_unlink_urb(dev->tx_urb);
++      netdev->stats.tx_errors++;
++}
++
++static void rtl8150_set_multicast(struct net_device *netdev)
++{
++      rtl8150_t *dev = netdev_priv(netdev);
++      u16 rx_creg = 0x9e;
++
++      netif_stop_queue(netdev);
++      if (netdev->flags & IFF_PROMISC) {
++              rx_creg |= 0x0001;
++              dev_info(&netdev->dev, "%s: promiscuous mode\n", netdev->name);
++      } else if (!netdev_mc_empty(netdev) ||
++                 (netdev->flags & IFF_ALLMULTI)) {
++              rx_creg &= 0xfffe;
++              rx_creg |= 0x0002;
++              dev_info(&netdev->dev, "%s: allmulti set\n", netdev->name);
++      } else {
++              /* ~RX_MULTICAST, ~RX_PROMISCUOUS */
++              rx_creg &= 0x00fc;
++      }
++      async_set_registers(dev, RCR, sizeof(rx_creg), rx_creg);
++      netif_wake_queue(netdev);
++}
++
++static netdev_tx_t rtl8150_start_xmit(struct sk_buff *skb,
++                                          struct net_device *netdev)
++{
++      rtl8150_t *dev = netdev_priv(netdev);
++      int count, res;
++
++      netif_stop_queue(netdev);
++      count = (skb->len < 60) ? 60 : skb->len;
++      count = (count & 0x3f) ? count : count + 1;
++      dev->tx_skb = skb;
++      usb_fill_bulk_urb(dev->tx_urb, dev->udev, usb_sndbulkpipe(dev->udev, 2),
++                    skb->data, count, write_bulk_callback, dev);
++      if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) {
++              /* Can we get/handle EPIPE here? */
++              if (res == -ENODEV)
++                      netif_device_detach(dev->netdev);
++              else {
++                      dev_warn(&netdev->dev, "failed tx_urb %d\n", res);
++                      netdev->stats.tx_errors++;
++                      netif_start_queue(netdev);
++              }
++      } else {
++              netdev->stats.tx_packets++;
++              netdev->stats.tx_bytes += skb->len;
++              netdev->trans_start = jiffies;
++      }
++
++      return NETDEV_TX_OK;
++}
++
++
++static void set_carrier(struct net_device *netdev)
++{
++      rtl8150_t *dev = netdev_priv(netdev);
++      short tmp;
++
++      get_registers(dev, CSCR, 2, &tmp);
++      if (tmp & CSCR_LINK_STATUS)
++              netif_carrier_on(netdev);
++      else
++              netif_carrier_off(netdev);
++}
++
++static int rtl8150_open(struct net_device *netdev)
++{
++      rtl8150_t *dev = netdev_priv(netdev);
++      int res;
++
++      if (dev->rx_skb == NULL)
++              dev->rx_skb = pull_skb(dev);
++      if (!dev->rx_skb)
++              return -ENOMEM;
++
++      set_registers(dev, IDR, 6, netdev->dev_addr);
++
++      usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
++                    dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
++      if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) {
++              if (res == -ENODEV)
++                      netif_device_detach(dev->netdev);
++              dev_warn(&netdev->dev, "rx_urb submit failed: %d\n", res);
++              return res;
++      }
++      usb_fill_int_urb(dev->intr_urb, dev->udev, usb_rcvintpipe(dev->udev, 3),
++                   dev->intr_buff, INTBUFSIZE, intr_callback,
++                   dev, dev->intr_interval);
++      if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) {
++              if (res == -ENODEV)
++                      netif_device_detach(dev->netdev);
++              dev_warn(&netdev->dev, "intr_urb submit failed: %d\n", res);
++              usb_kill_urb(dev->rx_urb);
++              return res;
++      }
++      enable_net_traffic(dev);
++      set_carrier(netdev);
++      netif_start_queue(netdev);
++
++      return res;
++}
++
++static int rtl8150_close(struct net_device *netdev)
++{
++      rtl8150_t *dev = netdev_priv(netdev);
++      int res = 0;
++
++      netif_stop_queue(netdev);
++      if (!test_bit(RTL8150_UNPLUG, &dev->flags))
++              disable_net_traffic(dev);
++      unlink_all_urbs(dev);
++
++      return res;
++}
++
++static void rtl8150_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
++{
++      rtl8150_t *dev = netdev_priv(netdev);
++
++      strlcpy(info->driver, driver_name, sizeof(info->driver));
++      strlcpy(info->version, DRIVER_VERSION, sizeof(info->version));
++      usb_make_path(dev->udev, info->bus_info, sizeof(info->bus_info));
++}
++
++static int rtl8150_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
++{
++      rtl8150_t *dev = netdev_priv(netdev);
++      short lpa, bmcr;
++
++      ecmd->supported = (SUPPORTED_10baseT_Half |
++                        SUPPORTED_10baseT_Full |
++                        SUPPORTED_100baseT_Half |
++                        SUPPORTED_100baseT_Full |
++                        SUPPORTED_Autoneg |
++                        SUPPORTED_TP | SUPPORTED_MII);
++      ecmd->port = PORT_TP;
++      ecmd->transceiver = XCVR_INTERNAL;
++      ecmd->phy_address = dev->phy;
++      get_registers(dev, BMCR, 2, &bmcr);
++      get_registers(dev, ANLP, 2, &lpa);
++      if (bmcr & BMCR_ANENABLE) {
++              u32 speed = ((lpa & (LPA_100HALF | LPA_100FULL)) ?
++                           SPEED_100 : SPEED_10);
++              ethtool_cmd_speed_set(ecmd, speed);
++              ecmd->autoneg = AUTONEG_ENABLE;
++              if (speed == SPEED_100)
++                      ecmd->duplex = (lpa & LPA_100FULL) ?
++                          DUPLEX_FULL : DUPLEX_HALF;
++              else
++                      ecmd->duplex = (lpa & LPA_10FULL) ?
++                          DUPLEX_FULL : DUPLEX_HALF;
++      } else {
++              ecmd->autoneg = AUTONEG_DISABLE;
++              ethtool_cmd_speed_set(ecmd, ((bmcr & BMCR_SPEED100) ?
++                                           SPEED_100 : SPEED_10));
++              ecmd->duplex = (bmcr & BMCR_FULLDPLX) ?
++                  DUPLEX_FULL : DUPLEX_HALF;
++      }
++      return 0;
++}
++
++static const struct ethtool_ops ops = {
++      .get_drvinfo = rtl8150_get_drvinfo,
++      .get_settings = rtl8150_get_settings,
++      .get_link = ethtool_op_get_link
++};
++
++static int rtl8150_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
++{
++      rtl8150_t *dev = netdev_priv(netdev);
++      u16 *data = (u16 *) & rq->ifr_ifru;
++      int res = 0;
++
++      switch (cmd) {
++      case SIOCDEVPRIVATE:
++              data[0] = dev->phy;
++      case SIOCDEVPRIVATE + 1:
++              read_mii_word(dev, dev->phy, (data[1] & 0x1f), &data[3]);
++              break;
++      case SIOCDEVPRIVATE + 2:
++              if (!capable(CAP_NET_ADMIN))
++                      return -EPERM;
++              write_mii_word(dev, dev->phy, (data[1] & 0x1f), data[2]);
++              break;
++      default:
++              res = -EOPNOTSUPP;
++      }
++
++      return res;
++}
++
++static const struct net_device_ops rtl8150_netdev_ops = {
++      .ndo_open               = rtl8150_open,
++      .ndo_stop               = rtl8150_close,
++      .ndo_do_ioctl           = rtl8150_ioctl,
++      .ndo_start_xmit         = rtl8150_start_xmit,
++      .ndo_tx_timeout         = rtl8150_tx_timeout,
++      .ndo_set_rx_mode        = rtl8150_set_multicast,
++      .ndo_set_mac_address    = rtl8150_set_mac_address,
++
++      .ndo_change_mtu         = eth_change_mtu,
++      .ndo_validate_addr      = eth_validate_addr,
++};
++
++static int rtl8150_probe(struct usb_interface *intf,
++                       const struct usb_device_id *id)
++{
++      struct usb_device *udev = interface_to_usbdev(intf);
++      rtl8150_t *dev;
++      struct net_device *netdev;
++
++      netdev = alloc_etherdev(sizeof(rtl8150_t));
++      if (!netdev)
++              return -ENOMEM;
++
++      dev = netdev_priv(netdev);
++
++      dev->intr_buff = kmalloc(INTBUFSIZE, GFP_KERNEL);
++      if (!dev->intr_buff) {
++              free_netdev(netdev);
++              return -ENOMEM;
++      }
++
++      tasklet_init(&dev->tl, rx_fixup, (unsigned long)dev);
++      spin_lock_init(&dev->rx_pool_lock);
++
++      dev->udev = udev;
++      dev->netdev = netdev;
++      netdev->netdev_ops = &rtl8150_netdev_ops;
++      netdev->watchdog_timeo = RTL8150_TX_TIMEOUT;
++      netdev->ethtool_ops = &ops;
++      dev->intr_interval = 100;       /* 100ms */
++
++      if (!alloc_all_urbs(dev)) {
++              dev_err(&intf->dev, "out of memory\n");
++              goto out;
++      }
++      if (!rtl8150_reset(dev)) {
++              dev_err(&intf->dev, "couldn't reset the device\n");
++              goto out1;
++      }
++      fill_skb_pool(dev);
++      set_ethernet_addr(dev);
++
++      usb_set_intfdata(intf, dev);
++      SET_NETDEV_DEV(netdev, &intf->dev);
++      if (register_netdev(netdev) != 0) {
++              dev_err(&intf->dev, "couldn't register the device\n");
++              goto out2;
++      }
++
++      dev_info(&intf->dev, "%s: rtl8150 is detected\n", netdev->name);
++
++      return 0;
++
++out2:
++      usb_set_intfdata(intf, NULL);
++      free_skb_pool(dev);
++out1:
++      free_all_urbs(dev);
++out:
++      kfree(dev->intr_buff);
++      free_netdev(netdev);
++      return -EIO;
++}
++
++static void rtl8150_disconnect(struct usb_interface *intf)
++{
++      rtl8150_t *dev = usb_get_intfdata(intf);
++
++      usb_set_intfdata(intf, NULL);
++      if (dev) {
++              set_bit(RTL8150_UNPLUG, &dev->flags);
++              tasklet_kill(&dev->tl);
++              unregister_netdev(dev->netdev);
++              unlink_all_urbs(dev);
++              free_all_urbs(dev);
++              free_skb_pool(dev);
++              if (dev->rx_skb)
++                      dev_kfree_skb(dev->rx_skb);
++              kfree(dev->intr_buff);
++              free_netdev(dev->netdev);
++      }
++}
++
++static struct usb_driver rtl8150_driver = {
++      .name           = driver_name,
++      .probe          = rtl8150_probe,
++      .disconnect     = rtl8150_disconnect,
++      .id_table       = rtl8150_table,
++      .suspend        = rtl8150_suspend,
++      .resume         = rtl8150_resume,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(rtl8150_driver);
++
++MODULE_AUTHOR(DRIVER_AUTHOR);
++MODULE_DESCRIPTION(DRIVER_DESC);
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/smsc75xx.c backports-3.18.1-1/drivers/net/usb/smsc75xx.c
+--- backports-3.18.1-1.org/drivers/net/usb/smsc75xx.c  1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/smsc75xx.c      2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,2286 @@
++ /***************************************************************************
++ *
++ * Copyright (C) 2007-2010 SMSC
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ *
++ *****************************************************************************/
++
++#include <linux/module.h>
++#include <linux/kmod.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/bitrev.h>
++#include <linux/crc16.h>
++#include <linux/crc32.h>
++#include <linux/usb/usbnet.h>
++#include <linux/slab.h>
++#include "smsc75xx.h"
++
++#define SMSC_CHIPNAME                 "smsc75xx"
++#define SMSC_DRIVER_VERSION           "1.0.0"
++#define HS_USB_PKT_SIZE                       (512)
++#define FS_USB_PKT_SIZE                       (64)
++#define DEFAULT_HS_BURST_CAP_SIZE     (16 * 1024 + 5 * HS_USB_PKT_SIZE)
++#define DEFAULT_FS_BURST_CAP_SIZE     (6 * 1024 + 33 * FS_USB_PKT_SIZE)
++#define DEFAULT_BULK_IN_DELAY         (0x00002000)
++#define MAX_SINGLE_PACKET_SIZE                (9000)
++#define LAN75XX_EEPROM_MAGIC          (0x7500)
++#define EEPROM_MAC_OFFSET             (0x01)
++#define DEFAULT_TX_CSUM_ENABLE                (true)
++#define DEFAULT_RX_CSUM_ENABLE                (true)
++#define SMSC75XX_INTERNAL_PHY_ID      (1)
++#define SMSC75XX_TX_OVERHEAD          (8)
++#define MAX_RX_FIFO_SIZE              (20 * 1024)
++#define MAX_TX_FIFO_SIZE              (12 * 1024)
++#define USB_VENDOR_ID_SMSC            (0x0424)
++#define USB_PRODUCT_ID_LAN7500                (0x7500)
++#define USB_PRODUCT_ID_LAN7505                (0x7505)
++#define RXW_PADDING                   2
++#define SUPPORTED_WAKE                        (WAKE_PHY | WAKE_UCAST | WAKE_BCAST | \
++                                       WAKE_MCAST | WAKE_ARP | WAKE_MAGIC)
++
++#define SUSPEND_SUSPEND0              (0x01)
++#define SUSPEND_SUSPEND1              (0x02)
++#define SUSPEND_SUSPEND2              (0x04)
++#define SUSPEND_SUSPEND3              (0x08)
++#define SUSPEND_ALLMODES              (SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
++                                       SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3)
++
++struct smsc75xx_priv {
++      struct usbnet *dev;
++      u32 rfe_ctl;
++      u32 wolopts;
++      u32 multicast_hash_table[DP_SEL_VHF_HASH_LEN];
++      struct mutex dataport_mutex;
++      spinlock_t rfe_ctl_lock;
++      struct work_struct set_multicast;
++      u8 suspend_flags;
++};
++
++struct usb_context {
++      struct usb_ctrlrequest req;
++      struct usbnet *dev;
++};
++
++static bool turbo_mode = true;
++module_param(turbo_mode, bool, 0644);
++MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
++
++static int __must_check __smsc75xx_read_reg(struct usbnet *dev, u32 index,
++                                          u32 *data, int in_pm)
++{
++      u32 buf;
++      int ret;
++      int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
++
++      BUG_ON(!dev);
++
++      if (!in_pm)
++              fn = usbnet_read_cmd;
++      else
++              fn = usbnet_read_cmd_nopm;
++
++      ret = fn(dev, USB_VENDOR_REQUEST_READ_REGISTER, USB_DIR_IN
++               | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
++               0, index, &buf, 4);
++      if (unlikely(ret < 0))
++              netdev_warn(dev->net, "Failed to read reg index 0x%08x: %d\n",
++                          index, ret);
++
++      le32_to_cpus(&buf);
++      *data = buf;
++
++      return ret;
++}
++
++static int __must_check __smsc75xx_write_reg(struct usbnet *dev, u32 index,
++                                           u32 data, int in_pm)
++{
++      u32 buf;
++      int ret;
++      int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
++
++      BUG_ON(!dev);
++
++      if (!in_pm)
++              fn = usbnet_write_cmd;
++      else
++              fn = usbnet_write_cmd_nopm;
++
++      buf = data;
++      cpu_to_le32s(&buf);
++
++      ret = fn(dev, USB_VENDOR_REQUEST_WRITE_REGISTER, USB_DIR_OUT
++               | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
++               0, index, &buf, 4);
++      if (unlikely(ret < 0))
++              netdev_warn(dev->net, "Failed to write reg index 0x%08x: %d\n",
++                          index, ret);
++
++      return ret;
++}
++
++static int __must_check smsc75xx_read_reg_nopm(struct usbnet *dev, u32 index,
++                                             u32 *data)
++{
++      return __smsc75xx_read_reg(dev, index, data, 1);
++}
++
++static int __must_check smsc75xx_write_reg_nopm(struct usbnet *dev, u32 index,
++                                              u32 data)
++{
++      return __smsc75xx_write_reg(dev, index, data, 1);
++}
++
++static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index,
++                                        u32 *data)
++{
++      return __smsc75xx_read_reg(dev, index, data, 0);
++}
++
++static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index,
++                                         u32 data)
++{
++      return __smsc75xx_write_reg(dev, index, data, 0);
++}
++
++/* Loop until the read is completed with timeout
++ * called with phy_mutex held */
++static __must_check int __smsc75xx_phy_wait_not_busy(struct usbnet *dev,
++                                                   int in_pm)
++{
++      unsigned long start_time = jiffies;
++      u32 val;
++      int ret;
++
++      do {
++              ret = __smsc75xx_read_reg(dev, MII_ACCESS, &val, in_pm);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading MII_ACCESS\n");
++                      return ret;
++              }
++
++              if (!(val & MII_ACCESS_BUSY))
++                      return 0;
++      } while (!time_after(jiffies, start_time + HZ));
++
++      return -EIO;
++}
++
++static int __smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx,
++                              int in_pm)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      u32 val, addr;
++      int ret;
++
++      mutex_lock(&dev->phy_mutex);
++
++      /* confirm MII not busy */
++      ret = __smsc75xx_phy_wait_not_busy(dev, in_pm);
++      if (ret < 0) {
++              netdev_warn(dev->net, "MII is busy in smsc75xx_mdio_read\n");
++              goto done;
++      }
++
++      /* set the address, index & direction (read from PHY) */
++      phy_id &= dev->mii.phy_id_mask;
++      idx &= dev->mii.reg_num_mask;
++      addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
++              | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
++              | MII_ACCESS_READ | MII_ACCESS_BUSY;
++      ret = __smsc75xx_write_reg(dev, MII_ACCESS, addr, in_pm);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing MII_ACCESS\n");
++              goto done;
++      }
++
++      ret = __smsc75xx_phy_wait_not_busy(dev, in_pm);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Timed out reading MII reg %02X\n", idx);
++              goto done;
++      }
++
++      ret = __smsc75xx_read_reg(dev, MII_DATA, &val, in_pm);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error reading MII_DATA\n");
++              goto done;
++      }
++
++      ret = (u16)(val & 0xFFFF);
++
++done:
++      mutex_unlock(&dev->phy_mutex);
++      return ret;
++}
++
++static void __smsc75xx_mdio_write(struct net_device *netdev, int phy_id,
++                                int idx, int regval, int in_pm)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      u32 val, addr;
++      int ret;
++
++      mutex_lock(&dev->phy_mutex);
++
++      /* confirm MII not busy */
++      ret = __smsc75xx_phy_wait_not_busy(dev, in_pm);
++      if (ret < 0) {
++              netdev_warn(dev->net, "MII is busy in smsc75xx_mdio_write\n");
++              goto done;
++      }
++
++      val = regval;
++      ret = __smsc75xx_write_reg(dev, MII_DATA, val, in_pm);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing MII_DATA\n");
++              goto done;
++      }
++
++      /* set the address, index & direction (write to PHY) */
++      phy_id &= dev->mii.phy_id_mask;
++      idx &= dev->mii.reg_num_mask;
++      addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
++              | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
++              | MII_ACCESS_WRITE | MII_ACCESS_BUSY;
++      ret = __smsc75xx_write_reg(dev, MII_ACCESS, addr, in_pm);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing MII_ACCESS\n");
++              goto done;
++      }
++
++      ret = __smsc75xx_phy_wait_not_busy(dev, in_pm);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Timed out writing MII reg %02X\n", idx);
++              goto done;
++      }
++
++done:
++      mutex_unlock(&dev->phy_mutex);
++}
++
++static int smsc75xx_mdio_read_nopm(struct net_device *netdev, int phy_id,
++                                 int idx)
++{
++      return __smsc75xx_mdio_read(netdev, phy_id, idx, 1);
++}
++
++static void smsc75xx_mdio_write_nopm(struct net_device *netdev, int phy_id,
++                                   int idx, int regval)
++{
++      __smsc75xx_mdio_write(netdev, phy_id, idx, regval, 1);
++}
++
++static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
++{
++      return __smsc75xx_mdio_read(netdev, phy_id, idx, 0);
++}
++
++static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
++                              int regval)
++{
++      __smsc75xx_mdio_write(netdev, phy_id, idx, regval, 0);
++}
++
++static int smsc75xx_wait_eeprom(struct usbnet *dev)
++{
++      unsigned long start_time = jiffies;
++      u32 val;
++      int ret;
++
++      do {
++              ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading E2P_CMD\n");
++                      return ret;
++              }
++
++              if (!(val & E2P_CMD_BUSY) || (val & E2P_CMD_TIMEOUT))
++                      break;
++              udelay(40);
++      } while (!time_after(jiffies, start_time + HZ));
++
++      if (val & (E2P_CMD_TIMEOUT | E2P_CMD_BUSY)) {
++              netdev_warn(dev->net, "EEPROM read operation timeout\n");
++              return -EIO;
++      }
++
++      return 0;
++}
++
++static int smsc75xx_eeprom_confirm_not_busy(struct usbnet *dev)
++{
++      unsigned long start_time = jiffies;
++      u32 val;
++      int ret;
++
++      do {
++              ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading E2P_CMD\n");
++                      return ret;
++              }
++
++              if (!(val & E2P_CMD_BUSY))
++                      return 0;
++
++              udelay(40);
++      } while (!time_after(jiffies, start_time + HZ));
++
++      netdev_warn(dev->net, "EEPROM is busy\n");
++      return -EIO;
++}
++
++static int smsc75xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length,
++                              u8 *data)
++{
++      u32 val;
++      int i, ret;
++
++      BUG_ON(!dev);
++      BUG_ON(!data);
++
++      ret = smsc75xx_eeprom_confirm_not_busy(dev);
++      if (ret)
++              return ret;
++
++      for (i = 0; i < length; i++) {
++              val = E2P_CMD_BUSY | E2P_CMD_READ | (offset & E2P_CMD_ADDR);
++              ret = smsc75xx_write_reg(dev, E2P_CMD, val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing E2P_CMD\n");
++                      return ret;
++              }
++
++              ret = smsc75xx_wait_eeprom(dev);
++              if (ret < 0)
++                      return ret;
++
++              ret = smsc75xx_read_reg(dev, E2P_DATA, &val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading E2P_DATA\n");
++                      return ret;
++              }
++
++              data[i] = val & 0xFF;
++              offset++;
++      }
++
++      return 0;
++}
++
++static int smsc75xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length,
++                               u8 *data)
++{
++      u32 val;
++      int i, ret;
++
++      BUG_ON(!dev);
++      BUG_ON(!data);
++
++      ret = smsc75xx_eeprom_confirm_not_busy(dev);
++      if (ret)
++              return ret;
++
++      /* Issue write/erase enable command */
++      val = E2P_CMD_BUSY | E2P_CMD_EWEN;
++      ret = smsc75xx_write_reg(dev, E2P_CMD, val);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing E2P_CMD\n");
++              return ret;
++      }
++
++      ret = smsc75xx_wait_eeprom(dev);
++      if (ret < 0)
++              return ret;
++
++      for (i = 0; i < length; i++) {
++
++              /* Fill data register */
++              val = data[i];
++              ret = smsc75xx_write_reg(dev, E2P_DATA, val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing E2P_DATA\n");
++                      return ret;
++              }
++
++              /* Send "write" command */
++              val = E2P_CMD_BUSY | E2P_CMD_WRITE | (offset & E2P_CMD_ADDR);
++              ret = smsc75xx_write_reg(dev, E2P_CMD, val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing E2P_CMD\n");
++                      return ret;
++              }
++
++              ret = smsc75xx_wait_eeprom(dev);
++              if (ret < 0)
++                      return ret;
++
++              offset++;
++      }
++
++      return 0;
++}
++
++static int smsc75xx_dataport_wait_not_busy(struct usbnet *dev)
++{
++      int i, ret;
++
++      for (i = 0; i < 100; i++) {
++              u32 dp_sel;
++              ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading DP_SEL\n");
++                      return ret;
++              }
++
++              if (dp_sel & DP_SEL_DPRDY)
++                      return 0;
++
++              udelay(40);
++      }
++
++      netdev_warn(dev->net, "smsc75xx_dataport_wait_not_busy timed out\n");
++
++      return -EIO;
++}
++
++static int smsc75xx_dataport_write(struct usbnet *dev, u32 ram_select, u32 addr,
++                                 u32 length, u32 *buf)
++{
++      struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
++      u32 dp_sel;
++      int i, ret;
++
++      mutex_lock(&pdata->dataport_mutex);
++
++      ret = smsc75xx_dataport_wait_not_busy(dev);
++      if (ret < 0) {
++              netdev_warn(dev->net, "smsc75xx_dataport_write busy on entry\n");
++              goto done;
++      }
++
++      ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error reading DP_SEL\n");
++              goto done;
++      }
++
++      dp_sel &= ~DP_SEL_RSEL;
++      dp_sel |= ram_select;
++      ret = smsc75xx_write_reg(dev, DP_SEL, dp_sel);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing DP_SEL\n");
++              goto done;
++      }
++
++      for (i = 0; i < length; i++) {
++              ret = smsc75xx_write_reg(dev, DP_ADDR, addr + i);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing DP_ADDR\n");
++                      goto done;
++              }
++
++              ret = smsc75xx_write_reg(dev, DP_DATA, buf[i]);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing DP_DATA\n");
++                      goto done;
++              }
++
++              ret = smsc75xx_write_reg(dev, DP_CMD, DP_CMD_WRITE);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing DP_CMD\n");
++                      goto done;
++              }
++
++              ret = smsc75xx_dataport_wait_not_busy(dev);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "smsc75xx_dataport_write timeout\n");
++                      goto done;
++              }
++      }
++
++done:
++      mutex_unlock(&pdata->dataport_mutex);
++      return ret;
++}
++
++/* returns hash bit number for given MAC address */
++static u32 smsc75xx_hash(char addr[ETH_ALEN])
++{
++      return (ether_crc(ETH_ALEN, addr) >> 23) & 0x1ff;
++}
++
++static void smsc75xx_deferred_multicast_write(struct work_struct *param)
++{
++      struct smsc75xx_priv *pdata =
++              container_of(param, struct smsc75xx_priv, set_multicast);
++      struct usbnet *dev = pdata->dev;
++      int ret;
++
++      netif_dbg(dev, drv, dev->net, "deferred multicast write 0x%08x\n",
++                pdata->rfe_ctl);
++
++      smsc75xx_dataport_write(dev, DP_SEL_VHF, DP_SEL_VHF_VLAN_LEN,
++              DP_SEL_VHF_HASH_LEN, pdata->multicast_hash_table);
++
++      ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
++      if (ret < 0)
++              netdev_warn(dev->net, "Error writing RFE_CRL\n");
++}
++
++static void smsc75xx_set_multicast(struct net_device *netdev)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
++      unsigned long flags;
++      int i;
++
++      spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
++
++      pdata->rfe_ctl &=
++              ~(RFE_CTL_AU | RFE_CTL_AM | RFE_CTL_DPF | RFE_CTL_MHF);
++      pdata->rfe_ctl |= RFE_CTL_AB;
++
++      for (i = 0; i < DP_SEL_VHF_HASH_LEN; i++)
++              pdata->multicast_hash_table[i] = 0;
++
++      if (dev->net->flags & IFF_PROMISC) {
++              netif_dbg(dev, drv, dev->net, "promiscuous mode enabled\n");
++              pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_AU;
++      } else if (dev->net->flags & IFF_ALLMULTI) {
++              netif_dbg(dev, drv, dev->net, "receive all multicast enabled\n");
++              pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_DPF;
++      } else if (!netdev_mc_empty(dev->net)) {
++              struct netdev_hw_addr *ha;
++
++              netif_dbg(dev, drv, dev->net, "receive multicast hash filter\n");
++
++              pdata->rfe_ctl |= RFE_CTL_MHF | RFE_CTL_DPF;
++
++              netdev_for_each_mc_addr(ha, netdev) {
++                      u32 bitnum = smsc75xx_hash(ha->addr);
++                      pdata->multicast_hash_table[bitnum / 32] |=
++                              (1 << (bitnum % 32));
++              }
++      } else {
++              netif_dbg(dev, drv, dev->net, "receive own packets only\n");
++              pdata->rfe_ctl |= RFE_CTL_DPF;
++      }
++
++      spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
++
++      /* defer register writes to a sleepable context */
++      schedule_work(&pdata->set_multicast);
++}
++
++static int smsc75xx_update_flowcontrol(struct usbnet *dev, u8 duplex,
++                                          u16 lcladv, u16 rmtadv)
++{
++      u32 flow = 0, fct_flow = 0;
++      int ret;
++
++      if (duplex == DUPLEX_FULL) {
++              u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
++
++              if (cap & FLOW_CTRL_TX) {
++                      flow = (FLOW_TX_FCEN | 0xFFFF);
++                      /* set fct_flow thresholds to 20% and 80% */
++                      fct_flow = (8 << 8) | 32;
++              }
++
++              if (cap & FLOW_CTRL_RX)
++                      flow |= FLOW_RX_FCEN;
++
++              netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s\n",
++                        (cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
++                        (cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
++      } else {
++              netif_dbg(dev, link, dev->net, "half duplex\n");
++      }
++
++      ret = smsc75xx_write_reg(dev, FLOW, flow);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing FLOW\n");
++              return ret;
++      }
++
++      ret = smsc75xx_write_reg(dev, FCT_FLOW, fct_flow);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing FCT_FLOW\n");
++              return ret;
++      }
++
++      return 0;
++}
++
++static int smsc75xx_link_reset(struct usbnet *dev)
++{
++      struct mii_if_info *mii = &dev->mii;
++      struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
++      u16 lcladv, rmtadv;
++      int ret;
++
++      /* write to clear phy interrupt status */
++      smsc75xx_mdio_write(dev->net, mii->phy_id, PHY_INT_SRC,
++              PHY_INT_SRC_CLEAR_ALL);
++
++      ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing INT_STS\n");
++              return ret;
++      }
++
++      mii_check_media(mii, 1, 1);
++      mii_ethtool_gset(&dev->mii, &ecmd);
++      lcladv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
++      rmtadv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
++
++      netif_dbg(dev, link, dev->net, "speed: %u duplex: %d lcladv: %04x rmtadv: %04x\n",
++                ethtool_cmd_speed(&ecmd), ecmd.duplex, lcladv, rmtadv);
++
++      return smsc75xx_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
++}
++
++static void smsc75xx_status(struct usbnet *dev, struct urb *urb)
++{
++      u32 intdata;
++
++      if (urb->actual_length != 4) {
++              netdev_warn(dev->net, "unexpected urb length %d\n",
++                          urb->actual_length);
++              return;
++      }
++
++      memcpy(&intdata, urb->transfer_buffer, 4);
++      le32_to_cpus(&intdata);
++
++      netif_dbg(dev, link, dev->net, "intdata: 0x%08X\n", intdata);
++
++      if (intdata & INT_ENP_PHY_INT)
++              usbnet_defer_kevent(dev, EVENT_LINK_RESET);
++      else
++              netdev_warn(dev->net, "unexpected interrupt, intdata=0x%08X\n",
++                          intdata);
++}
++
++static int smsc75xx_ethtool_get_eeprom_len(struct net_device *net)
++{
++      return MAX_EEPROM_SIZE;
++}
++
++static int smsc75xx_ethtool_get_eeprom(struct net_device *netdev,
++                                     struct ethtool_eeprom *ee, u8 *data)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++
++      ee->magic = LAN75XX_EEPROM_MAGIC;
++
++      return smsc75xx_read_eeprom(dev, ee->offset, ee->len, data);
++}
++
++static int smsc75xx_ethtool_set_eeprom(struct net_device *netdev,
++                                     struct ethtool_eeprom *ee, u8 *data)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++
++      if (ee->magic != LAN75XX_EEPROM_MAGIC) {
++              netdev_warn(dev->net, "EEPROM: magic value mismatch: 0x%x\n",
++                          ee->magic);
++              return -EINVAL;
++      }
++
++      return smsc75xx_write_eeprom(dev, ee->offset, ee->len, data);
++}
++
++static void smsc75xx_ethtool_get_wol(struct net_device *net,
++                                   struct ethtool_wolinfo *wolinfo)
++{
++      struct usbnet *dev = netdev_priv(net);
++      struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
++
++      wolinfo->supported = SUPPORTED_WAKE;
++      wolinfo->wolopts = pdata->wolopts;
++}
++
++static int smsc75xx_ethtool_set_wol(struct net_device *net,
++                                  struct ethtool_wolinfo *wolinfo)
++{
++      struct usbnet *dev = netdev_priv(net);
++      struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
++      int ret;
++
++      pdata->wolopts = wolinfo->wolopts & SUPPORTED_WAKE;
++
++      ret = device_set_wakeup_enable(&dev->udev->dev, pdata->wolopts);
++      if (ret < 0)
++              netdev_warn(dev->net, "device_set_wakeup_enable error %d\n", ret);
++
++      return ret;
++}
++
++static const struct ethtool_ops smsc75xx_ethtool_ops = {
++      .get_link       = usbnet_get_link,
++      .nway_reset     = usbnet_nway_reset,
++      .get_drvinfo    = usbnet_get_drvinfo,
++      .get_msglevel   = usbnet_get_msglevel,
++      .set_msglevel   = usbnet_set_msglevel,
++      .get_settings   = usbnet_get_settings,
++      .set_settings   = usbnet_set_settings,
++      .get_eeprom_len = smsc75xx_ethtool_get_eeprom_len,
++      .get_eeprom     = smsc75xx_ethtool_get_eeprom,
++      .set_eeprom     = smsc75xx_ethtool_set_eeprom,
++      .get_wol        = smsc75xx_ethtool_get_wol,
++      .set_wol        = smsc75xx_ethtool_set_wol,
++};
++
++static int smsc75xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++
++      if (!netif_running(netdev))
++              return -EINVAL;
++
++      return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
++}
++
++static void smsc75xx_init_mac_address(struct usbnet *dev)
++{
++      /* try reading mac address from EEPROM */
++      if (smsc75xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
++                      dev->net->dev_addr) == 0) {
++              if (is_valid_ether_addr(dev->net->dev_addr)) {
++                      /* eeprom values are valid so use them */
++                      netif_dbg(dev, ifup, dev->net,
++                                "MAC address read from EEPROM\n");
++                      return;
++              }
++      }
++
++      /* no eeprom, or eeprom values are invalid. generate random MAC */
++      eth_hw_addr_random(dev->net);
++      netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n");
++}
++
++static int smsc75xx_set_mac_address(struct usbnet *dev)
++{
++      u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 |
++              dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24;
++      u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8;
++
++      int ret = smsc75xx_write_reg(dev, RX_ADDRH, addr_hi);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write RX_ADDRH: %d\n", ret);
++              return ret;
++      }
++
++      ret = smsc75xx_write_reg(dev, RX_ADDRL, addr_lo);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write RX_ADDRL: %d\n", ret);
++              return ret;
++      }
++
++      addr_hi |= ADDR_FILTX_FB_VALID;
++      ret = smsc75xx_write_reg(dev, ADDR_FILTX, addr_hi);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write ADDR_FILTX: %d\n", ret);
++              return ret;
++      }
++
++      ret = smsc75xx_write_reg(dev, ADDR_FILTX + 4, addr_lo);
++      if (ret < 0)
++              netdev_warn(dev->net, "Failed to write ADDR_FILTX+4: %d\n", ret);
++
++      return ret;
++}
++
++static int smsc75xx_phy_initialize(struct usbnet *dev)
++{
++      int bmcr, ret, timeout = 0;
++
++      /* Initialize MII structure */
++      dev->mii.dev = dev->net;
++      dev->mii.mdio_read = smsc75xx_mdio_read;
++      dev->mii.mdio_write = smsc75xx_mdio_write;
++      dev->mii.phy_id_mask = 0x1f;
++      dev->mii.reg_num_mask = 0x1f;
++      dev->mii.supports_gmii = 1;
++      dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID;
++
++      /* reset phy and wait for reset to complete */
++      smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
++
++      do {
++              msleep(10);
++              bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
++              if (bmcr < 0) {
++                      netdev_warn(dev->net, "Error reading MII_BMCR\n");
++                      return bmcr;
++              }
++              timeout++;
++      } while ((bmcr & BMCR_RESET) && (timeout < 100));
++
++      if (timeout >= 100) {
++              netdev_warn(dev->net, "timeout on PHY Reset\n");
++              return -EIO;
++      }
++
++      smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
++              ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
++              ADVERTISE_PAUSE_ASYM);
++      smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
++              ADVERTISE_1000FULL);
++
++      /* read and write to clear phy interrupt status */
++      ret = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error reading PHY_INT_SRC\n");
++              return ret;
++      }
++
++      smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_SRC, 0xffff);
++
++      smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK,
++              PHY_INT_MASK_DEFAULT);
++      mii_nway_restart(&dev->mii);
++
++      netif_dbg(dev, ifup, dev->net, "phy initialised successfully\n");
++      return 0;
++}
++
++static int smsc75xx_set_rx_max_frame_length(struct usbnet *dev, int size)
++{
++      int ret = 0;
++      u32 buf;
++      bool rxenabled;
++
++      ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read MAC_RX: %d\n", ret);
++              return ret;
++      }
++
++      rxenabled = ((buf & MAC_RX_RXEN) != 0);
++
++      if (rxenabled) {
++              buf &= ~MAC_RX_RXEN;
++              ret = smsc75xx_write_reg(dev, MAC_RX, buf);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret);
++                      return ret;
++              }
++      }
++
++      /* add 4 to size for FCS */
++      buf &= ~MAC_RX_MAX_SIZE;
++      buf |= (((size + 4) << MAC_RX_MAX_SIZE_SHIFT) & MAC_RX_MAX_SIZE);
++
++      ret = smsc75xx_write_reg(dev, MAC_RX, buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret);
++              return ret;
++      }
++
++      if (rxenabled) {
++              buf |= MAC_RX_RXEN;
++              ret = smsc75xx_write_reg(dev, MAC_RX, buf);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret);
++                      return ret;
++              }
++      }
++
++      return 0;
++}
++
++static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      int ret;
++
++      if (new_mtu > MAX_SINGLE_PACKET_SIZE)
++              return -EINVAL;
++
++      ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to set mac rx frame length\n");
++              return ret;
++      }
++
++      return usbnet_change_mtu(netdev, new_mtu);
++}
++
++/* Enable or disable Rx checksum offload engine */
++static int smsc75xx_set_features(struct net_device *netdev,
++      netdev_features_t features)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
++      unsigned long flags;
++      int ret;
++
++      spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
++
++      if (features & NETIF_F_RXCSUM)
++              pdata->rfe_ctl |= RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM;
++      else
++              pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM);
++
++      spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
++      /* it's racing here! */
++
++      ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
++      if (ret < 0)
++              netdev_warn(dev->net, "Error writing RFE_CTL\n");
++
++      return ret;
++}
++
++static int smsc75xx_wait_ready(struct usbnet *dev, int in_pm)
++{
++      int timeout = 0;
++
++      do {
++              u32 buf;
++              int ret;
++
++              ret = __smsc75xx_read_reg(dev, PMT_CTL, &buf, in_pm);
++
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Failed to read PMT_CTL: %d\n", ret);
++                      return ret;
++              }
++
++              if (buf & PMT_CTL_DEV_RDY)
++                      return 0;
++
++              msleep(10);
++              timeout++;
++      } while (timeout < 100);
++
++      netdev_warn(dev->net, "timeout waiting for device ready\n");
++      return -EIO;
++}
++
++static int smsc75xx_reset(struct usbnet *dev)
++{
++      struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
++      u32 buf;
++      int ret = 0, timeout;
++
++      netif_dbg(dev, ifup, dev->net, "entering smsc75xx_reset\n");
++
++      ret = smsc75xx_wait_ready(dev, 0);
++      if (ret < 0) {
++              netdev_warn(dev->net, "device not ready in smsc75xx_reset\n");
++              return ret;
++      }
++
++      ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
++              return ret;
++      }
++
++      buf |= HW_CFG_LRST;
++
++      ret = smsc75xx_write_reg(dev, HW_CFG, buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write HW_CFG: %d\n", ret);
++              return ret;
++      }
++
++      timeout = 0;
++      do {
++              msleep(10);
++              ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
++                      return ret;
++              }
++              timeout++;
++      } while ((buf & HW_CFG_LRST) && (timeout < 100));
++
++      if (timeout >= 100) {
++              netdev_warn(dev->net, "timeout on completion of Lite Reset\n");
++              return -EIO;
++      }
++
++      netif_dbg(dev, ifup, dev->net, "Lite reset complete, resetting PHY\n");
++
++      ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read PMT_CTL: %d\n", ret);
++              return ret;
++      }
++
++      buf |= PMT_CTL_PHY_RST;
++
++      ret = smsc75xx_write_reg(dev, PMT_CTL, buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write PMT_CTL: %d\n", ret);
++              return ret;
++      }
++
++      timeout = 0;
++      do {
++              msleep(10);
++              ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Failed to read PMT_CTL: %d\n", ret);
++                      return ret;
++              }
++              timeout++;
++      } while ((buf & PMT_CTL_PHY_RST) && (timeout < 100));
++
++      if (timeout >= 100) {
++              netdev_warn(dev->net, "timeout waiting for PHY Reset\n");
++              return -EIO;
++      }
++
++      netif_dbg(dev, ifup, dev->net, "PHY reset complete\n");
++
++      ret = smsc75xx_set_mac_address(dev);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to set mac address\n");
++              return ret;
++      }
++
++      netif_dbg(dev, ifup, dev->net, "MAC Address: %pM\n",
++                dev->net->dev_addr);
++
++      ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
++              return ret;
++      }
++
++      netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x\n",
++                buf);
++
++      buf |= HW_CFG_BIR;
++
++      ret = smsc75xx_write_reg(dev, HW_CFG, buf);
++      if (ret < 0) {
++              netdev_warn(dev->net,  "Failed to write HW_CFG: %d\n", ret);
++              return ret;
++      }
++
++      ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
++              return ret;
++      }
++
++      netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG after writing HW_CFG_BIR: 0x%08x\n",
++                buf);
++
++      if (!turbo_mode) {
++              buf = 0;
++              dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
++      } else if (dev->udev->speed == USB_SPEED_HIGH) {
++              buf = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
++              dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
++      } else {
++              buf = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
++              dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
++      }
++
++      netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld\n",
++                (ulong)dev->rx_urb_size);
++
++      ret = smsc75xx_write_reg(dev, BURST_CAP, buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write BURST_CAP: %d\n", ret);
++              return ret;
++      }
++
++      ret = smsc75xx_read_reg(dev, BURST_CAP, &buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read BURST_CAP: %d\n", ret);
++              return ret;
++      }
++
++      netif_dbg(dev, ifup, dev->net,
++                "Read Value from BURST_CAP after writing: 0x%08x\n", buf);
++
++      ret = smsc75xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write BULK_IN_DLY: %d\n", ret);
++              return ret;
++      }
++
++      ret = smsc75xx_read_reg(dev, BULK_IN_DLY, &buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read BULK_IN_DLY: %d\n", ret);
++              return ret;
++      }
++
++      netif_dbg(dev, ifup, dev->net,
++                "Read Value from BULK_IN_DLY after writing: 0x%08x\n", buf);
++
++      if (turbo_mode) {
++              ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
++                      return ret;
++              }
++
++              netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x\n", buf);
++
++              buf |= (HW_CFG_MEF | HW_CFG_BCE);
++
++              ret = smsc75xx_write_reg(dev, HW_CFG, buf);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Failed to write HW_CFG: %d\n", ret);
++                      return ret;
++              }
++
++              ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
++                      return ret;
++              }
++
++              netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x\n", buf);
++      }
++
++      /* set FIFO sizes */
++      buf = (MAX_RX_FIFO_SIZE - 512) / 512;
++      ret = smsc75xx_write_reg(dev, FCT_RX_FIFO_END, buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write FCT_RX_FIFO_END: %d\n", ret);
++              return ret;
++      }
++
++      netif_dbg(dev, ifup, dev->net, "FCT_RX_FIFO_END set to 0x%08x\n", buf);
++
++      buf = (MAX_TX_FIFO_SIZE - 512) / 512;
++      ret = smsc75xx_write_reg(dev, FCT_TX_FIFO_END, buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write FCT_TX_FIFO_END: %d\n", ret);
++              return ret;
++      }
++
++      netif_dbg(dev, ifup, dev->net, "FCT_TX_FIFO_END set to 0x%08x\n", buf);
++
++      ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write INT_STS: %d\n", ret);
++              return ret;
++      }
++
++      ret = smsc75xx_read_reg(dev, ID_REV, &buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read ID_REV: %d\n", ret);
++              return ret;
++      }
++
++      netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x\n", buf);
++
++      ret = smsc75xx_read_reg(dev, E2P_CMD, &buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read E2P_CMD: %d\n", ret);
++              return ret;
++      }
++
++      /* only set default GPIO/LED settings if no EEPROM is detected */
++      if (!(buf & E2P_CMD_LOADED)) {
++              ret = smsc75xx_read_reg(dev, LED_GPIO_CFG, &buf);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Failed to read LED_GPIO_CFG: %d\n", ret);
++                      return ret;
++              }
++
++              buf &= ~(LED_GPIO_CFG_LED2_FUN_SEL | LED_GPIO_CFG_LED10_FUN_SEL);
++              buf |= LED_GPIO_CFG_LEDGPIO_EN | LED_GPIO_CFG_LED2_FUN_SEL;
++
++              ret = smsc75xx_write_reg(dev, LED_GPIO_CFG, buf);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Failed to write LED_GPIO_CFG: %d\n", ret);
++                      return ret;
++              }
++      }
++
++      ret = smsc75xx_write_reg(dev, FLOW, 0);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write FLOW: %d\n", ret);
++              return ret;
++      }
++
++      ret = smsc75xx_write_reg(dev, FCT_FLOW, 0);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write FCT_FLOW: %d\n", ret);
++              return ret;
++      }
++
++      /* Don't need rfe_ctl_lock during initialisation */
++      ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read RFE_CTL: %d\n", ret);
++              return ret;
++      }
++
++      pdata->rfe_ctl |= RFE_CTL_AB | RFE_CTL_DPF;
++
++      ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write RFE_CTL: %d\n", ret);
++              return ret;
++      }
++
++      ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read RFE_CTL: %d\n", ret);
++              return ret;
++      }
++
++      netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x\n",
++                pdata->rfe_ctl);
++
++      /* Enable or disable checksum offload engines */
++      smsc75xx_set_features(dev->net, dev->net->features);
++
++      smsc75xx_set_multicast(dev->net);
++
++      ret = smsc75xx_phy_initialize(dev);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to initialize PHY: %d\n", ret);
++              return ret;
++      }
++
++      ret = smsc75xx_read_reg(dev, INT_EP_CTL, &buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read INT_EP_CTL: %d\n", ret);
++              return ret;
++      }
++
++      /* enable PHY interrupts */
++      buf |= INT_ENP_PHY_INT;
++
++      ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write INT_EP_CTL: %d\n", ret);
++              return ret;
++      }
++
++      /* allow mac to detect speed and duplex from phy */
++      ret = smsc75xx_read_reg(dev, MAC_CR, &buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read MAC_CR: %d\n", ret);
++              return ret;
++      }
++
++      buf |= (MAC_CR_ADD | MAC_CR_ASD);
++      ret = smsc75xx_write_reg(dev, MAC_CR, buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write MAC_CR: %d\n", ret);
++              return ret;
++      }
++
++      ret = smsc75xx_read_reg(dev, MAC_TX, &buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read MAC_TX: %d\n", ret);
++              return ret;
++      }
++
++      buf |= MAC_TX_TXEN;
++
++      ret = smsc75xx_write_reg(dev, MAC_TX, buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write MAC_TX: %d\n", ret);
++              return ret;
++      }
++
++      netif_dbg(dev, ifup, dev->net, "MAC_TX set to 0x%08x\n", buf);
++
++      ret = smsc75xx_read_reg(dev, FCT_TX_CTL, &buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read FCT_TX_CTL: %d\n", ret);
++              return ret;
++      }
++
++      buf |= FCT_TX_CTL_EN;
++
++      ret = smsc75xx_write_reg(dev, FCT_TX_CTL, buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write FCT_TX_CTL: %d\n", ret);
++              return ret;
++      }
++
++      netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x\n", buf);
++
++      ret = smsc75xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to set max rx frame length\n");
++              return ret;
++      }
++
++      ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read MAC_RX: %d\n", ret);
++              return ret;
++      }
++
++      buf |= MAC_RX_RXEN;
++
++      ret = smsc75xx_write_reg(dev, MAC_RX, buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret);
++              return ret;
++      }
++
++      netif_dbg(dev, ifup, dev->net, "MAC_RX set to 0x%08x\n", buf);
++
++      ret = smsc75xx_read_reg(dev, FCT_RX_CTL, &buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read FCT_RX_CTL: %d\n", ret);
++              return ret;
++      }
++
++      buf |= FCT_RX_CTL_EN;
++
++      ret = smsc75xx_write_reg(dev, FCT_RX_CTL, buf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write FCT_RX_CTL: %d\n", ret);
++              return ret;
++      }
++
++      netif_dbg(dev, ifup, dev->net, "FCT_RX_CTL set to 0x%08x\n", buf);
++
++      netif_dbg(dev, ifup, dev->net, "smsc75xx_reset, return 0\n");
++      return 0;
++}
++
++static const struct net_device_ops smsc75xx_netdev_ops = {
++      .ndo_open               = usbnet_open,
++      .ndo_stop               = usbnet_stop,
++      .ndo_start_xmit         = usbnet_start_xmit,
++      .ndo_tx_timeout         = usbnet_tx_timeout,
++      .ndo_change_mtu         = smsc75xx_change_mtu,
++      .ndo_set_mac_address    = eth_mac_addr,
++      .ndo_validate_addr      = eth_validate_addr,
++      .ndo_do_ioctl           = smsc75xx_ioctl,
++      .ndo_set_rx_mode        = smsc75xx_set_multicast,
++      .ndo_set_features       = smsc75xx_set_features,
++};
++
++static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      struct smsc75xx_priv *pdata = NULL;
++      int ret;
++
++      printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n");
++
++      ret = usbnet_get_endpoints(dev, intf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "usbnet_get_endpoints failed: %d\n", ret);
++              return ret;
++      }
++
++      dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv),
++                                            GFP_KERNEL);
++
++      pdata = (struct smsc75xx_priv *)(dev->data[0]);
++      if (!pdata)
++              return -ENOMEM;
++
++      pdata->dev = dev;
++
++      spin_lock_init(&pdata->rfe_ctl_lock);
++      mutex_init(&pdata->dataport_mutex);
++
++      INIT_WORK(&pdata->set_multicast, smsc75xx_deferred_multicast_write);
++
++      if (DEFAULT_TX_CSUM_ENABLE)
++              dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
++
++      if (DEFAULT_RX_CSUM_ENABLE)
++              dev->net->features |= NETIF_F_RXCSUM;
++
++      dev->net->hw_features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
++                              NETIF_F_RXCSUM;
++
++      ret = smsc75xx_wait_ready(dev, 0);
++      if (ret < 0) {
++              netdev_warn(dev->net, "device not ready in smsc75xx_bind\n");
++              return ret;
++      }
++
++      smsc75xx_init_mac_address(dev);
++
++      /* Init all registers */
++      ret = smsc75xx_reset(dev);
++      if (ret < 0) {
++              netdev_warn(dev->net, "smsc75xx_reset error %d\n", ret);
++              return ret;
++      }
++
++      dev->net->netdev_ops = &smsc75xx_netdev_ops;
++      dev->net->ethtool_ops = &smsc75xx_ethtool_ops;
++      dev->net->flags |= IFF_MULTICAST;
++      dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD;
++      dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
++      return 0;
++}
++
++static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf)
++{
++      struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
++      if (pdata) {
++              netif_dbg(dev, ifdown, dev->net, "free pdata\n");
++              kfree(pdata);
++              pdata = NULL;
++              dev->data[0] = 0;
++      }
++}
++
++static u16 smsc_crc(const u8 *buffer, size_t len)
++{
++      return bitrev16(crc16(0xFFFF, buffer, len));
++}
++
++static int smsc75xx_write_wuff(struct usbnet *dev, int filter, u32 wuf_cfg,
++                             u32 wuf_mask1)
++{
++      int cfg_base = WUF_CFGX + filter * 4;
++      int mask_base = WUF_MASKX + filter * 16;
++      int ret;
++
++      ret = smsc75xx_write_reg(dev, cfg_base, wuf_cfg);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing WUF_CFGX\n");
++              return ret;
++      }
++
++      ret = smsc75xx_write_reg(dev, mask_base, wuf_mask1);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing WUF_MASKX\n");
++              return ret;
++      }
++
++      ret = smsc75xx_write_reg(dev, mask_base + 4, 0);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing WUF_MASKX\n");
++              return ret;
++      }
++
++      ret = smsc75xx_write_reg(dev, mask_base + 8, 0);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing WUF_MASKX\n");
++              return ret;
++      }
++
++      ret = smsc75xx_write_reg(dev, mask_base + 12, 0);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing WUF_MASKX\n");
++              return ret;
++      }
++
++      return 0;
++}
++
++static int smsc75xx_enter_suspend0(struct usbnet *dev)
++{
++      struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
++      u32 val;
++      int ret;
++
++      ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error reading PMT_CTL\n");
++              return ret;
++      }
++
++      val &= (~(PMT_CTL_SUS_MODE | PMT_CTL_PHY_RST));
++      val |= PMT_CTL_SUS_MODE_0 | PMT_CTL_WOL_EN | PMT_CTL_WUPS;
++
++      ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing PMT_CTL\n");
++              return ret;
++      }
++
++      pdata->suspend_flags |= SUSPEND_SUSPEND0;
++
++      return 0;
++}
++
++static int smsc75xx_enter_suspend1(struct usbnet *dev)
++{
++      struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
++      u32 val;
++      int ret;
++
++      ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error reading PMT_CTL\n");
++              return ret;
++      }
++
++      val &= ~(PMT_CTL_SUS_MODE | PMT_CTL_WUPS | PMT_CTL_PHY_RST);
++      val |= PMT_CTL_SUS_MODE_1;
++
++      ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing PMT_CTL\n");
++              return ret;
++      }
++
++      /* clear wol status, enable energy detection */
++      val &= ~PMT_CTL_WUPS;
++      val |= (PMT_CTL_WUPS_ED | PMT_CTL_ED_EN);
++
++      ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing PMT_CTL\n");
++              return ret;
++      }
++
++      pdata->suspend_flags |= SUSPEND_SUSPEND1;
++
++      return 0;
++}
++
++static int smsc75xx_enter_suspend2(struct usbnet *dev)
++{
++      struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
++      u32 val;
++      int ret;
++
++      ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error reading PMT_CTL\n");
++              return ret;
++      }
++
++      val &= ~(PMT_CTL_SUS_MODE | PMT_CTL_WUPS | PMT_CTL_PHY_RST);
++      val |= PMT_CTL_SUS_MODE_2;
++
++      ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing PMT_CTL\n");
++              return ret;
++      }
++
++      pdata->suspend_flags |= SUSPEND_SUSPEND2;
++
++      return 0;
++}
++
++static int smsc75xx_enter_suspend3(struct usbnet *dev)
++{
++      struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
++      u32 val;
++      int ret;
++
++      ret = smsc75xx_read_reg_nopm(dev, FCT_RX_CTL, &val);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error reading FCT_RX_CTL\n");
++              return ret;
++      }
++
++      if (val & FCT_RX_CTL_RXUSED) {
++              netdev_dbg(dev->net, "rx fifo not empty in autosuspend\n");
++              return -EBUSY;
++      }
++
++      ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error reading PMT_CTL\n");
++              return ret;
++      }
++
++      val &= ~(PMT_CTL_SUS_MODE | PMT_CTL_WUPS | PMT_CTL_PHY_RST);
++      val |= PMT_CTL_SUS_MODE_3 | PMT_CTL_RES_CLR_WKP_EN;
++
++      ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing PMT_CTL\n");
++              return ret;
++      }
++
++      /* clear wol status */
++      val &= ~PMT_CTL_WUPS;
++      val |= PMT_CTL_WUPS_WOL;
++
++      ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing PMT_CTL\n");
++              return ret;
++      }
++
++      pdata->suspend_flags |= SUSPEND_SUSPEND3;
++
++      return 0;
++}
++
++static int smsc75xx_enable_phy_wakeup_interrupts(struct usbnet *dev, u16 mask)
++{
++      struct mii_if_info *mii = &dev->mii;
++      int ret;
++
++      netdev_dbg(dev->net, "enabling PHY wakeup interrupts\n");
++
++      /* read to clear */
++      ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_SRC);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error reading PHY_INT_SRC\n");
++              return ret;
++      }
++
++      /* enable interrupt source */
++      ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_MASK);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error reading PHY_INT_MASK\n");
++              return ret;
++      }
++
++      ret |= mask;
++
++      smsc75xx_mdio_write_nopm(dev->net, mii->phy_id, PHY_INT_MASK, ret);
++
++      return 0;
++}
++
++static int smsc75xx_link_ok_nopm(struct usbnet *dev)
++{
++      struct mii_if_info *mii = &dev->mii;
++      int ret;
++
++      /* first, a dummy read, needed to latch some MII phys */
++      ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error reading MII_BMSR\n");
++              return ret;
++      }
++
++      ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error reading MII_BMSR\n");
++              return ret;
++      }
++
++      return !!(ret & BMSR_LSTATUS);
++}
++
++static int smsc75xx_autosuspend(struct usbnet *dev, u32 link_up)
++{
++      int ret;
++
++      if (!netif_running(dev->net)) {
++              /* interface is ifconfig down so fully power down hw */
++              netdev_dbg(dev->net, "autosuspend entering SUSPEND2\n");
++              return smsc75xx_enter_suspend2(dev);
++      }
++
++      if (!link_up) {
++              /* link is down so enter EDPD mode */
++              netdev_dbg(dev->net, "autosuspend entering SUSPEND1\n");
++
++              /* enable PHY wakeup events for if cable is attached */
++              ret = smsc75xx_enable_phy_wakeup_interrupts(dev,
++                      PHY_INT_MASK_ANEG_COMP);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
++                      return ret;
++              }
++
++              netdev_info(dev->net, "entering SUSPEND1 mode\n");
++              return smsc75xx_enter_suspend1(dev);
++      }
++
++      /* enable PHY wakeup events so we remote wakeup if cable is pulled */
++      ret = smsc75xx_enable_phy_wakeup_interrupts(dev,
++              PHY_INT_MASK_LINK_DOWN);
++      if (ret < 0) {
++              netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
++              return ret;
++      }
++
++      netdev_dbg(dev->net, "autosuspend entering SUSPEND3\n");
++      return smsc75xx_enter_suspend3(dev);
++}
++
++static int smsc75xx_suspend(struct usb_interface *intf, pm_message_t message)
++{
++      struct usbnet *dev = usb_get_intfdata(intf);
++      struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
++      u32 val, link_up;
++      int ret;
++
++      ret = usbnet_suspend(intf, message);
++      if (ret < 0) {
++              netdev_warn(dev->net, "usbnet_suspend error\n");
++              return ret;
++      }
++
++      if (pdata->suspend_flags) {
++              netdev_warn(dev->net, "error during last resume\n");
++              pdata->suspend_flags = 0;
++      }
++
++      /* determine if link is up using only _nopm functions */
++      link_up = smsc75xx_link_ok_nopm(dev);
++
++      if (message.event == PM_EVENT_AUTO_SUSPEND) {
++              ret = smsc75xx_autosuspend(dev, link_up);
++              goto done;
++      }
++
++      /* if we get this far we're not autosuspending */
++      /* if no wol options set, or if link is down and we're not waking on
++       * PHY activity, enter lowest power SUSPEND2 mode
++       */
++      if (!(pdata->wolopts & SUPPORTED_WAKE) ||
++              !(link_up || (pdata->wolopts & WAKE_PHY))) {
++              netdev_info(dev->net, "entering SUSPEND2 mode\n");
++
++              /* disable energy detect (link up) & wake up events */
++              ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading WUCSR\n");
++                      goto done;
++              }
++
++              val &= ~(WUCSR_MPEN | WUCSR_WUEN);
++
++              ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing WUCSR\n");
++                      goto done;
++              }
++
++              ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading PMT_CTL\n");
++                      goto done;
++              }
++
++              val &= ~(PMT_CTL_ED_EN | PMT_CTL_WOL_EN);
++
++              ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing PMT_CTL\n");
++                      goto done;
++              }
++
++              ret = smsc75xx_enter_suspend2(dev);
++              goto done;
++      }
++
++      if (pdata->wolopts & WAKE_PHY) {
++              ret = smsc75xx_enable_phy_wakeup_interrupts(dev,
++                      (PHY_INT_MASK_ANEG_COMP | PHY_INT_MASK_LINK_DOWN));
++              if (ret < 0) {
++                      netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
++                      goto done;
++              }
++
++              /* if link is down then configure EDPD and enter SUSPEND1,
++               * otherwise enter SUSPEND0 below
++               */
++              if (!link_up) {
++                      struct mii_if_info *mii = &dev->mii;
++                      netdev_info(dev->net, "entering SUSPEND1 mode\n");
++
++                      /* enable energy detect power-down mode */
++                      ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id,
++                              PHY_MODE_CTRL_STS);
++                      if (ret < 0) {
++                              netdev_warn(dev->net, "Error reading PHY_MODE_CTRL_STS\n");
++                              goto done;
++                      }
++
++                      ret |= MODE_CTRL_STS_EDPWRDOWN;
++
++                      smsc75xx_mdio_write_nopm(dev->net, mii->phy_id,
++                              PHY_MODE_CTRL_STS, ret);
++
++                      /* enter SUSPEND1 mode */
++                      ret = smsc75xx_enter_suspend1(dev);
++                      goto done;
++              }
++      }
++
++      if (pdata->wolopts & (WAKE_MCAST | WAKE_ARP)) {
++              int i, filter = 0;
++
++              /* disable all filters */
++              for (i = 0; i < WUF_NUM; i++) {
++                      ret = smsc75xx_write_reg_nopm(dev, WUF_CFGX + i * 4, 0);
++                      if (ret < 0) {
++                              netdev_warn(dev->net, "Error writing WUF_CFGX\n");
++                              goto done;
++                      }
++              }
++
++              if (pdata->wolopts & WAKE_MCAST) {
++                      const u8 mcast[] = {0x01, 0x00, 0x5E};
++                      netdev_info(dev->net, "enabling multicast detection\n");
++
++                      val = WUF_CFGX_EN | WUF_CFGX_ATYPE_MULTICAST
++                              | smsc_crc(mcast, 3);
++                      ret = smsc75xx_write_wuff(dev, filter++, val, 0x0007);
++                      if (ret < 0) {
++                              netdev_warn(dev->net, "Error writing wakeup filter\n");
++                              goto done;
++                      }
++              }
++
++              if (pdata->wolopts & WAKE_ARP) {
++                      const u8 arp[] = {0x08, 0x06};
++                      netdev_info(dev->net, "enabling ARP detection\n");
++
++                      val = WUF_CFGX_EN | WUF_CFGX_ATYPE_ALL | (0x0C << 16)
++                              | smsc_crc(arp, 2);
++                      ret = smsc75xx_write_wuff(dev, filter++, val, 0x0003);
++                      if (ret < 0) {
++                              netdev_warn(dev->net, "Error writing wakeup filter\n");
++                              goto done;
++                      }
++              }
++
++              /* clear any pending pattern match packet status */
++              ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading WUCSR\n");
++                      goto done;
++              }
++
++              val |= WUCSR_WUFR;
++
++              ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing WUCSR\n");
++                      goto done;
++              }
++
++              netdev_info(dev->net, "enabling packet match detection\n");
++              ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading WUCSR\n");
++                      goto done;
++              }
++
++              val |= WUCSR_WUEN;
++
++              ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing WUCSR\n");
++                      goto done;
++              }
++      } else {
++              netdev_info(dev->net, "disabling packet match detection\n");
++              ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading WUCSR\n");
++                      goto done;
++              }
++
++              val &= ~WUCSR_WUEN;
++
++              ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing WUCSR\n");
++                      goto done;
++              }
++      }
++
++      /* disable magic, bcast & unicast wakeup sources */
++      ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error reading WUCSR\n");
++              goto done;
++      }
++
++      val &= ~(WUCSR_MPEN | WUCSR_BCST_EN | WUCSR_PFDA_EN);
++
++      ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing WUCSR\n");
++              goto done;
++      }
++
++      if (pdata->wolopts & WAKE_PHY) {
++              netdev_info(dev->net, "enabling PHY wakeup\n");
++
++              ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading PMT_CTL\n");
++                      goto done;
++              }
++
++              /* clear wol status, enable energy detection */
++              val &= ~PMT_CTL_WUPS;
++              val |= (PMT_CTL_WUPS_ED | PMT_CTL_ED_EN);
++
++              ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing PMT_CTL\n");
++                      goto done;
++              }
++      }
++
++      if (pdata->wolopts & WAKE_MAGIC) {
++              netdev_info(dev->net, "enabling magic packet wakeup\n");
++              ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading WUCSR\n");
++                      goto done;
++              }
++
++              /* clear any pending magic packet status */
++              val |= WUCSR_MPR | WUCSR_MPEN;
++
++              ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing WUCSR\n");
++                      goto done;
++              }
++      }
++
++      if (pdata->wolopts & WAKE_BCAST) {
++              netdev_info(dev->net, "enabling broadcast detection\n");
++              ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading WUCSR\n");
++                      goto done;
++              }
++
++              val |= WUCSR_BCAST_FR | WUCSR_BCST_EN;
++
++              ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing WUCSR\n");
++                      goto done;
++              }
++      }
++
++      if (pdata->wolopts & WAKE_UCAST) {
++              netdev_info(dev->net, "enabling unicast detection\n");
++              ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading WUCSR\n");
++                      goto done;
++              }
++
++              val |= WUCSR_WUFR | WUCSR_PFDA_EN;
++
++              ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing WUCSR\n");
++                      goto done;
++              }
++      }
++
++      /* enable receiver to enable frame reception */
++      ret = smsc75xx_read_reg_nopm(dev, MAC_RX, &val);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read MAC_RX: %d\n", ret);
++              goto done;
++      }
++
++      val |= MAC_RX_RXEN;
++
++      ret = smsc75xx_write_reg_nopm(dev, MAC_RX, val);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret);
++              goto done;
++      }
++
++      /* some wol options are enabled, so enter SUSPEND0 */
++      netdev_info(dev->net, "entering SUSPEND0 mode\n");
++      ret = smsc75xx_enter_suspend0(dev);
++
++done:
++      /*
++       * TODO: resume() might need to handle the suspend failure
++       * in system sleep
++       */
++      if (ret && PMSG_IS_AUTO(message))
++              usbnet_resume(intf);
++      return ret;
++}
++
++static int smsc75xx_resume(struct usb_interface *intf)
++{
++      struct usbnet *dev = usb_get_intfdata(intf);
++      struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
++      u8 suspend_flags = pdata->suspend_flags;
++      int ret;
++      u32 val;
++
++      netdev_dbg(dev->net, "resume suspend_flags=0x%02x\n", suspend_flags);
++
++      /* do this first to ensure it's cleared even in error case */
++      pdata->suspend_flags = 0;
++
++      if (suspend_flags & SUSPEND_ALLMODES) {
++              /* Disable wakeup sources */
++              ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading WUCSR\n");
++                      return ret;
++              }
++
++              val &= ~(WUCSR_WUEN | WUCSR_MPEN | WUCSR_PFDA_EN
++                      | WUCSR_BCST_EN);
++
++              ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing WUCSR\n");
++                      return ret;
++              }
++
++              /* clear wake-up status */
++              ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading PMT_CTL\n");
++                      return ret;
++              }
++
++              val &= ~PMT_CTL_WOL_EN;
++              val |= PMT_CTL_WUPS;
++
++              ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing PMT_CTL\n");
++                      return ret;
++              }
++      }
++
++      if (suspend_flags & SUSPEND_SUSPEND2) {
++              netdev_info(dev->net, "resuming from SUSPEND2\n");
++
++              ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading PMT_CTL\n");
++                      return ret;
++              }
++
++              val |= PMT_CTL_PHY_PWRUP;
++
++              ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing PMT_CTL\n");
++                      return ret;
++              }
++      }
++
++      ret = smsc75xx_wait_ready(dev, 1);
++      if (ret < 0) {
++              netdev_warn(dev->net, "device not ready in smsc75xx_resume\n");
++              return ret;
++      }
++
++      return usbnet_resume(intf);
++}
++
++static void smsc75xx_rx_csum_offload(struct usbnet *dev, struct sk_buff *skb,
++                                   u32 rx_cmd_a, u32 rx_cmd_b)
++{
++      if (!(dev->net->features & NETIF_F_RXCSUM) ||
++          unlikely(rx_cmd_a & RX_CMD_A_LCSM)) {
++              skb->ip_summed = CHECKSUM_NONE;
++      } else {
++              skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT));
++              skb->ip_summed = CHECKSUM_COMPLETE;
++      }
++}
++
++static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
++{
++      /* This check is no longer done by usbnet */
++      if (skb->len < dev->net->hard_header_len)
++              return 0;
++
++      while (skb->len > 0) {
++              u32 rx_cmd_a, rx_cmd_b, align_count, size;
++              struct sk_buff *ax_skb;
++              unsigned char *packet;
++
++              memcpy(&rx_cmd_a, skb->data, sizeof(rx_cmd_a));
++              le32_to_cpus(&rx_cmd_a);
++              skb_pull(skb, 4);
++
++              memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b));
++              le32_to_cpus(&rx_cmd_b);
++              skb_pull(skb, 4 + RXW_PADDING);
++
++              packet = skb->data;
++
++              /* get the packet length */
++              size = (rx_cmd_a & RX_CMD_A_LEN) - RXW_PADDING;
++              align_count = (4 - ((size + RXW_PADDING) % 4)) % 4;
++
++              if (unlikely(rx_cmd_a & RX_CMD_A_RED)) {
++                      netif_dbg(dev, rx_err, dev->net,
++                                "Error rx_cmd_a=0x%08x\n", rx_cmd_a);
++                      dev->net->stats.rx_errors++;
++                      dev->net->stats.rx_dropped++;
++
++                      if (rx_cmd_a & RX_CMD_A_FCS)
++                              dev->net->stats.rx_crc_errors++;
++                      else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT))
++                              dev->net->stats.rx_frame_errors++;
++              } else {
++                      /* MAX_SINGLE_PACKET_SIZE + 4(CRC) + 2(COE) + 4(Vlan) */
++                      if (unlikely(size > (MAX_SINGLE_PACKET_SIZE + ETH_HLEN + 12))) {
++                              netif_dbg(dev, rx_err, dev->net,
++                                        "size err rx_cmd_a=0x%08x\n",
++                                        rx_cmd_a);
++                              return 0;
++                      }
++
++                      /* last frame in this batch */
++                      if (skb->len == size) {
++                              smsc75xx_rx_csum_offload(dev, skb, rx_cmd_a,
++                                      rx_cmd_b);
++
++                              skb_trim(skb, skb->len - 4); /* remove fcs */
++                              skb->truesize = size + sizeof(struct sk_buff);
++
++                              return 1;
++                      }
++
++                      ax_skb = skb_clone(skb, GFP_ATOMIC);
++                      if (unlikely(!ax_skb)) {
++                              netdev_warn(dev->net, "Error allocating skb\n");
++                              return 0;
++                      }
++
++                      ax_skb->len = size;
++                      ax_skb->data = packet;
++                      skb_set_tail_pointer(ax_skb, size);
++
++                      smsc75xx_rx_csum_offload(dev, ax_skb, rx_cmd_a,
++                              rx_cmd_b);
++
++                      skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
++                      ax_skb->truesize = size + sizeof(struct sk_buff);
++
++                      usbnet_skb_return(dev, ax_skb);
++              }
++
++              skb_pull(skb, size);
++
++              /* padding bytes before the next frame starts */
++              if (skb->len)
++                      skb_pull(skb, align_count);
++      }
++
++      if (unlikely(skb->len < 0)) {
++              netdev_warn(dev->net, "invalid rx length<0 %d\n", skb->len);
++              return 0;
++      }
++
++      return 1;
++}
++
++static struct sk_buff *smsc75xx_tx_fixup(struct usbnet *dev,
++                                       struct sk_buff *skb, gfp_t flags)
++{
++      u32 tx_cmd_a, tx_cmd_b;
++
++      if (skb_headroom(skb) < SMSC75XX_TX_OVERHEAD) {
++              struct sk_buff *skb2 =
++                      skb_copy_expand(skb, SMSC75XX_TX_OVERHEAD, 0, flags);
++              dev_kfree_skb_any(skb);
++              skb = skb2;
++              if (!skb)
++                      return NULL;
++      }
++
++      tx_cmd_a = (u32)(skb->len & TX_CMD_A_LEN) | TX_CMD_A_FCS;
++
++      if (skb->ip_summed == CHECKSUM_PARTIAL)
++              tx_cmd_a |= TX_CMD_A_IPE | TX_CMD_A_TPE;
++
++      if (skb_is_gso(skb)) {
++              u16 mss = max(skb_shinfo(skb)->gso_size, TX_MSS_MIN);
++              tx_cmd_b = (mss << TX_CMD_B_MSS_SHIFT) & TX_CMD_B_MSS;
++
++              tx_cmd_a |= TX_CMD_A_LSO;
++      } else {
++              tx_cmd_b = 0;
++      }
++
++      skb_push(skb, 4);
++      cpu_to_le32s(&tx_cmd_b);
++      memcpy(skb->data, &tx_cmd_b, 4);
++
++      skb_push(skb, 4);
++      cpu_to_le32s(&tx_cmd_a);
++      memcpy(skb->data, &tx_cmd_a, 4);
++
++      return skb;
++}
++
++static int smsc75xx_manage_power(struct usbnet *dev, int on)
++{
++      dev->intf->needs_remote_wakeup = on;
++      return 0;
++}
++
++static const struct driver_info smsc75xx_info = {
++      .description    = "smsc75xx USB 2.0 Gigabit Ethernet",
++      .bind           = smsc75xx_bind,
++      .unbind         = smsc75xx_unbind,
++      .link_reset     = smsc75xx_link_reset,
++      .reset          = smsc75xx_reset,
++      .rx_fixup       = smsc75xx_rx_fixup,
++      .tx_fixup       = smsc75xx_tx_fixup,
++      .status         = smsc75xx_status,
++      .manage_power   = smsc75xx_manage_power,
++      .flags          = FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR,
++};
++
++static const struct usb_device_id products[] = {
++      {
++              /* SMSC7500 USB Gigabit Ethernet Device */
++              USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7500),
++              .driver_info = (unsigned long) &smsc75xx_info,
++      },
++      {
++              /* SMSC7500 USB Gigabit Ethernet Device */
++              USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7505),
++              .driver_info = (unsigned long) &smsc75xx_info,
++      },
++      { },            /* END */
++};
++MODULE_DEVICE_TABLE(usb, products);
++
++static struct usb_driver smsc75xx_driver = {
++      .name           = SMSC_CHIPNAME,
++      .id_table       = products,
++      .probe          = usbnet_probe,
++      .suspend        = smsc75xx_suspend,
++      .resume         = smsc75xx_resume,
++      .reset_resume   = smsc75xx_resume,
++      .disconnect     = usbnet_disconnect,
++      .disable_hub_initiated_lpm = 1,
++      .supports_autosuspend = 1,
++};
++
++module_usb_driver(smsc75xx_driver);
++
++MODULE_AUTHOR("Nancy Lin");
++MODULE_AUTHOR("Steve Glendinning <steve.glendinning@shawell.net>");
++MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices");
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/smsc75xx.h backports-3.18.1-1/drivers/net/usb/smsc75xx.h
+--- backports-3.18.1-1.org/drivers/net/usb/smsc75xx.h  1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/smsc75xx.h      2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,421 @@
++ /***************************************************************************
++ *
++ * Copyright (C) 2007-2010 SMSC
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ *
++ *****************************************************************************/
++
++#ifndef _SMSC75XX_H
++#define _SMSC75XX_H
++
++/* Tx command words */
++#define TX_CMD_A_LSO                  (0x08000000)
++#define TX_CMD_A_IPE                  (0x04000000)
++#define TX_CMD_A_TPE                  (0x02000000)
++#define TX_CMD_A_IVTG                 (0x01000000)
++#define TX_CMD_A_RVTG                 (0x00800000)
++#define TX_CMD_A_FCS                  (0x00400000)
++#define TX_CMD_A_LEN                  (0x000FFFFF)
++
++#define TX_CMD_B_MSS                  (0x3FFF0000)
++#define TX_CMD_B_MSS_SHIFT            (16)
++#define TX_MSS_MIN                    ((u16)8)
++#define TX_CMD_B_VTAG                 (0x0000FFFF)
++
++/* Rx command words */
++#define RX_CMD_A_ICE                  (0x80000000)
++#define RX_CMD_A_TCE                  (0x40000000)
++#define RX_CMD_A_IPV                  (0x20000000)
++#define RX_CMD_A_PID                  (0x18000000)
++#define RX_CMD_A_PID_NIP              (0x00000000)
++#define RX_CMD_A_PID_TCP              (0x08000000)
++#define RX_CMD_A_PID_UDP              (0x10000000)
++#define RX_CMD_A_PID_PP                       (0x18000000)
++#define RX_CMD_A_PFF                  (0x04000000)
++#define RX_CMD_A_BAM                  (0x02000000)
++#define RX_CMD_A_MAM                  (0x01000000)
++#define RX_CMD_A_FVTG                 (0x00800000)
++#define RX_CMD_A_RED                  (0x00400000)
++#define RX_CMD_A_RWT                  (0x00200000)
++#define RX_CMD_A_RUNT                 (0x00100000)
++#define RX_CMD_A_LONG                 (0x00080000)
++#define RX_CMD_A_RXE                  (0x00040000)
++#define RX_CMD_A_DRB                  (0x00020000)
++#define RX_CMD_A_FCS                  (0x00010000)
++#define RX_CMD_A_UAM                  (0x00008000)
++#define RX_CMD_A_LCSM                 (0x00004000)
++#define RX_CMD_A_LEN                  (0x00003FFF)
++
++#define RX_CMD_B_CSUM                 (0xFFFF0000)
++#define RX_CMD_B_CSUM_SHIFT           (16)
++#define RX_CMD_B_VTAG                 (0x0000FFFF)
++
++/* SCSRs */
++#define ID_REV                                (0x0000)
++
++#define FPGA_REV                      (0x0004)
++
++#define BOND_CTL                      (0x0008)
++
++#define INT_STS                               (0x000C)
++#define INT_STS_RDFO_INT              (0x00400000)
++#define INT_STS_TXE_INT                       (0x00200000)
++#define INT_STS_MACRTO_INT            (0x00100000)
++#define INT_STS_TX_DIS_INT            (0x00080000)
++#define INT_STS_RX_DIS_INT            (0x00040000)
++#define INT_STS_PHY_INT_              (0x00020000)
++#define INT_STS_MAC_ERR_INT           (0x00008000)
++#define INT_STS_TDFU                  (0x00004000)
++#define INT_STS_TDFO                  (0x00002000)
++#define INT_STS_GPIOS                 (0x00000FFF)
++#define INT_STS_CLEAR_ALL             (0xFFFFFFFF)
++
++#define HW_CFG                                (0x0010)
++#define HW_CFG_SMDET_STS              (0x00008000)
++#define HW_CFG_SMDET_EN                       (0x00004000)
++#define HW_CFG_EEM                    (0x00002000)
++#define HW_CFG_RST_PROTECT            (0x00001000)
++#define HW_CFG_PORT_SWAP              (0x00000800)
++#define HW_CFG_PHY_BOOST              (0x00000600)
++#define HW_CFG_PHY_BOOST_NORMAL               (0x00000000)
++#define HW_CFG_PHY_BOOST_4            (0x00002000)
++#define HW_CFG_PHY_BOOST_8            (0x00004000)
++#define HW_CFG_PHY_BOOST_12           (0x00006000)
++#define HW_CFG_LEDB                   (0x00000100)
++#define HW_CFG_BIR                    (0x00000080)
++#define HW_CFG_SBP                    (0x00000040)
++#define HW_CFG_IME                    (0x00000020)
++#define HW_CFG_MEF                    (0x00000010)
++#define HW_CFG_ETC                    (0x00000008)
++#define HW_CFG_BCE                    (0x00000004)
++#define HW_CFG_LRST                   (0x00000002)
++#define HW_CFG_SRST                   (0x00000001)
++
++#define PMT_CTL                               (0x0014)
++#define PMT_CTL_PHY_PWRUP             (0x00000400)
++#define PMT_CTL_RES_CLR_WKP_EN                (0x00000100)
++#define PMT_CTL_DEV_RDY                       (0x00000080)
++#define PMT_CTL_SUS_MODE              (0x00000060)
++#define PMT_CTL_SUS_MODE_0            (0x00000000)
++#define PMT_CTL_SUS_MODE_1            (0x00000020)
++#define PMT_CTL_SUS_MODE_2            (0x00000040)
++#define PMT_CTL_SUS_MODE_3            (0x00000060)
++#define PMT_CTL_PHY_RST                       (0x00000010)
++#define PMT_CTL_WOL_EN                        (0x00000008)
++#define PMT_CTL_ED_EN                 (0x00000004)
++#define PMT_CTL_WUPS                  (0x00000003)
++#define PMT_CTL_WUPS_NO                       (0x00000000)
++#define PMT_CTL_WUPS_ED                       (0x00000001)
++#define PMT_CTL_WUPS_WOL              (0x00000002)
++#define PMT_CTL_WUPS_MULTI            (0x00000003)
++
++#define LED_GPIO_CFG                  (0x0018)
++#define LED_GPIO_CFG_LED2_FUN_SEL     (0x80000000)
++#define LED_GPIO_CFG_LED10_FUN_SEL    (0x40000000)
++#define LED_GPIO_CFG_LEDGPIO_EN               (0x0000F000)
++#define LED_GPIO_CFG_LEDGPIO_EN_0     (0x00001000)
++#define LED_GPIO_CFG_LEDGPIO_EN_1     (0x00002000)
++#define LED_GPIO_CFG_LEDGPIO_EN_2     (0x00004000)
++#define LED_GPIO_CFG_LEDGPIO_EN_3     (0x00008000)
++#define LED_GPIO_CFG_GPBUF            (0x00000F00)
++#define LED_GPIO_CFG_GPBUF_0          (0x00000100)
++#define LED_GPIO_CFG_GPBUF_1          (0x00000200)
++#define LED_GPIO_CFG_GPBUF_2          (0x00000400)
++#define LED_GPIO_CFG_GPBUF_3          (0x00000800)
++#define LED_GPIO_CFG_GPDIR            (0x000000F0)
++#define LED_GPIO_CFG_GPDIR_0          (0x00000010)
++#define LED_GPIO_CFG_GPDIR_1          (0x00000020)
++#define LED_GPIO_CFG_GPDIR_2          (0x00000040)
++#define LED_GPIO_CFG_GPDIR_3          (0x00000080)
++#define LED_GPIO_CFG_GPDATA           (0x0000000F)
++#define LED_GPIO_CFG_GPDATA_0         (0x00000001)
++#define LED_GPIO_CFG_GPDATA_1         (0x00000002)
++#define LED_GPIO_CFG_GPDATA_2         (0x00000004)
++#define LED_GPIO_CFG_GPDATA_3         (0x00000008)
++
++#define GPIO_CFG                      (0x001C)
++#define GPIO_CFG_SHIFT                        (24)
++#define GPIO_CFG_GPEN                 (0xFF000000)
++#define GPIO_CFG_GPBUF                        (0x00FF0000)
++#define GPIO_CFG_GPDIR                        (0x0000FF00)
++#define GPIO_CFG_GPDATA                       (0x000000FF)
++
++#define GPIO_WAKE                     (0x0020)
++#define GPIO_WAKE_PHY_LINKUP_EN               (0x80000000)
++#define GPIO_WAKE_POL                 (0x0FFF0000)
++#define GPIO_WAKE_POL_SHIFT           (16)
++#define GPIO_WAKE_WK                  (0x00000FFF)
++
++#define DP_SEL                                (0x0024)
++#define DP_SEL_DPRDY                  (0x80000000)
++#define DP_SEL_RSEL                   (0x0000000F)
++#define DP_SEL_URX                    (0x00000000)
++#define DP_SEL_VHF                    (0x00000001)
++#define DP_SEL_VHF_HASH_LEN           (16)
++#define DP_SEL_VHF_VLAN_LEN           (128)
++#define DP_SEL_LSO_HEAD                       (0x00000002)
++#define DP_SEL_FCT_RX                 (0x00000003)
++#define DP_SEL_FCT_TX                 (0x00000004)
++#define DP_SEL_DESCRIPTOR             (0x00000005)
++#define DP_SEL_WOL                    (0x00000006)
++
++#define DP_CMD                                (0x0028)
++#define DP_CMD_WRITE                  (0x01)
++#define DP_CMD_READ                   (0x00)
++
++#define DP_ADDR                               (0x002C)
++
++#define DP_DATA                               (0x0030)
++
++#define BURST_CAP                     (0x0034)
++#define BURST_CAP_MASK                        (0x0000000F)
++
++#define INT_EP_CTL                    (0x0038)
++#define INT_EP_CTL_INTEP_ON           (0x80000000)
++#define INT_EP_CTL_RDFO_EN            (0x00400000)
++#define INT_EP_CTL_TXE_EN             (0x00200000)
++#define INT_EP_CTL_MACROTO_EN         (0x00100000)
++#define INT_EP_CTL_TX_DIS_EN          (0x00080000)
++#define INT_EP_CTL_RX_DIS_EN          (0x00040000)
++#define INT_EP_CTL_PHY_EN_            (0x00020000)
++#define INT_EP_CTL_MAC_ERR_EN         (0x00008000)
++#define INT_EP_CTL_TDFU_EN            (0x00004000)
++#define INT_EP_CTL_TDFO_EN            (0x00002000)
++#define INT_EP_CTL_RX_FIFO_EN         (0x00001000)
++#define INT_EP_CTL_GPIOX_EN           (0x00000FFF)
++
++#define BULK_IN_DLY                   (0x003C)
++#define BULK_IN_DLY_MASK              (0xFFFF)
++
++#define E2P_CMD                               (0x0040)
++#define E2P_CMD_BUSY                  (0x80000000)
++#define E2P_CMD_MASK                  (0x70000000)
++#define E2P_CMD_READ                  (0x00000000)
++#define E2P_CMD_EWDS                  (0x10000000)
++#define E2P_CMD_EWEN                  (0x20000000)
++#define E2P_CMD_WRITE                 (0x30000000)
++#define E2P_CMD_WRAL                  (0x40000000)
++#define E2P_CMD_ERASE                 (0x50000000)
++#define E2P_CMD_ERAL                  (0x60000000)
++#define E2P_CMD_RELOAD                        (0x70000000)
++#define E2P_CMD_TIMEOUT                       (0x00000400)
++#define E2P_CMD_LOADED                        (0x00000200)
++#define E2P_CMD_ADDR                  (0x000001FF)
++
++#define MAX_EEPROM_SIZE                       (512)
++
++#define E2P_DATA                      (0x0044)
++#define E2P_DATA_MASK_                        (0x000000FF)
++
++#define RFE_CTL                               (0x0060)
++#define RFE_CTL_TCPUDP_CKM            (0x00001000)
++#define RFE_CTL_IP_CKM                        (0x00000800)
++#define RFE_CTL_AB                    (0x00000400)
++#define RFE_CTL_AM                    (0x00000200)
++#define RFE_CTL_AU                    (0x00000100)
++#define RFE_CTL_VS                    (0x00000080)
++#define RFE_CTL_UF                    (0x00000040)
++#define RFE_CTL_VF                    (0x00000020)
++#define RFE_CTL_SPF                   (0x00000010)
++#define RFE_CTL_MHF                   (0x00000008)
++#define RFE_CTL_DHF                   (0x00000004)
++#define RFE_CTL_DPF                   (0x00000002)
++#define RFE_CTL_RST_RF                        (0x00000001)
++
++#define VLAN_TYPE                     (0x0064)
++#define VLAN_TYPE_MASK                        (0x0000FFFF)
++
++#define FCT_RX_CTL                    (0x0090)
++#define FCT_RX_CTL_EN                 (0x80000000)
++#define FCT_RX_CTL_RST                        (0x40000000)
++#define FCT_RX_CTL_SBF                        (0x02000000)
++#define FCT_RX_CTL_OVERFLOW           (0x01000000)
++#define FCT_RX_CTL_FRM_DROP           (0x00800000)
++#define FCT_RX_CTL_RX_NOT_EMPTY               (0x00400000)
++#define FCT_RX_CTL_RX_EMPTY           (0x00200000)
++#define FCT_RX_CTL_RX_DISABLED                (0x00100000)
++#define FCT_RX_CTL_RXUSED             (0x0000FFFF)
++
++#define FCT_TX_CTL                    (0x0094)
++#define FCT_TX_CTL_EN                 (0x80000000)
++#define FCT_TX_CTL_RST                        (0x40000000)
++#define FCT_TX_CTL_TX_NOT_EMPTY               (0x00400000)
++#define FCT_TX_CTL_TX_EMPTY           (0x00200000)
++#define FCT_TX_CTL_TX_DISABLED                (0x00100000)
++#define FCT_TX_CTL_TXUSED             (0x0000FFFF)
++
++#define FCT_RX_FIFO_END                       (0x0098)
++#define FCT_RX_FIFO_END_MASK          (0x0000007F)
++
++#define FCT_TX_FIFO_END                       (0x009C)
++#define FCT_TX_FIFO_END_MASK          (0x0000003F)
++
++#define FCT_FLOW                      (0x00A0)
++#define FCT_FLOW_THRESHOLD_OFF                (0x00007F00)
++#define FCT_FLOW_THRESHOLD_OFF_SHIFT  (8)
++#define FCT_FLOW_THRESHOLD_ON         (0x0000007F)
++
++/* MAC CSRs */
++#define MAC_CR                                (0x100)
++#define MAC_CR_ADP                    (0x00002000)
++#define MAC_CR_ADD                    (0x00001000)
++#define MAC_CR_ASD                    (0x00000800)
++#define MAC_CR_INT_LOOP                       (0x00000400)
++#define MAC_CR_BOLMT                  (0x000000C0)
++#define MAC_CR_FDPX                   (0x00000008)
++#define MAC_CR_CFG                    (0x00000006)
++#define MAC_CR_CFG_10                 (0x00000000)
++#define MAC_CR_CFG_100                        (0x00000002)
++#define MAC_CR_CFG_1000                       (0x00000004)
++#define MAC_CR_RST                    (0x00000001)
++
++#define MAC_RX                                (0x104)
++#define MAC_RX_MAX_SIZE                       (0x3FFF0000)
++#define MAC_RX_MAX_SIZE_SHIFT         (16)
++#define MAC_RX_FCS_STRIP              (0x00000010)
++#define MAC_RX_FSE                    (0x00000004)
++#define MAC_RX_RXD                    (0x00000002)
++#define MAC_RX_RXEN                   (0x00000001)
++
++#define MAC_TX                                (0x108)
++#define MAC_TX_BFCS                   (0x00000004)
++#define MAC_TX_TXD                    (0x00000002)
++#define MAC_TX_TXEN                   (0x00000001)
++
++#define FLOW                          (0x10C)
++#define FLOW_FORCE_FC                 (0x80000000)
++#define FLOW_TX_FCEN                  (0x40000000)
++#define FLOW_RX_FCEN                  (0x20000000)
++#define FLOW_FPF                      (0x10000000)
++#define FLOW_PAUSE_TIME                       (0x0000FFFF)
++
++#define RAND_SEED                     (0x110)
++#define RAND_SEED_MASK                        (0x0000FFFF)
++
++#define ERR_STS                               (0x114)
++#define ERR_STS_FCS_ERR                       (0x00000100)
++#define ERR_STS_LFRM_ERR              (0x00000080)
++#define ERR_STS_RUNT_ERR              (0x00000040)
++#define ERR_STS_COLLISION_ERR         (0x00000010)
++#define ERR_STS_ALIGN_ERR             (0x00000008)
++#define ERR_STS_URUN_ERR              (0x00000004)
++
++#define RX_ADDRH                      (0x118)
++#define RX_ADDRH_MASK                 (0x0000FFFF)
++
++#define RX_ADDRL                      (0x11C)
++
++#define MII_ACCESS                    (0x120)
++#define MII_ACCESS_PHY_ADDR           (0x0000F800)
++#define MII_ACCESS_PHY_ADDR_SHIFT     (11)
++#define MII_ACCESS_REG_ADDR           (0x000007C0)
++#define MII_ACCESS_REG_ADDR_SHIFT     (6)
++#define MII_ACCESS_READ                       (0x00000000)
++#define MII_ACCESS_WRITE              (0x00000002)
++#define MII_ACCESS_BUSY                       (0x00000001)
++
++#define MII_DATA                      (0x124)
++#define MII_DATA_MASK                 (0x0000FFFF)
++
++#define WUCSR                         (0x140)
++#define WUCSR_PFDA_FR                 (0x00000080)
++#define WUCSR_WUFR                    (0x00000040)
++#define WUCSR_MPR                     (0x00000020)
++#define WUCSR_BCAST_FR                        (0x00000010)
++#define WUCSR_PFDA_EN                 (0x00000008)
++#define WUCSR_WUEN                    (0x00000004)
++#define WUCSR_MPEN                    (0x00000002)
++#define WUCSR_BCST_EN                 (0x00000001)
++
++#define WUF_CFGX                      (0x144)
++#define WUF_CFGX_EN                   (0x80000000)
++#define WUF_CFGX_ATYPE                        (0x03000000)
++#define WUF_CFGX_ATYPE_UNICAST                (0x00000000)
++#define WUF_CFGX_ATYPE_MULTICAST      (0x02000000)
++#define WUF_CFGX_ATYPE_ALL            (0x03000000)
++#define WUF_CFGX_PATTERN_OFFSET               (0x007F0000)
++#define WUF_CFGX_PATTERN_OFFSET_SHIFT (16)
++#define WUF_CFGX_CRC16                        (0x0000FFFF)
++#define WUF_NUM                               (8)
++
++#define WUF_MASKX                     (0x170)
++#define WUF_MASKX_AVALID              (0x80000000)
++#define WUF_MASKX_ATYPE                       (0x40000000)
++
++#define ADDR_FILTX                    (0x300)
++#define ADDR_FILTX_FB_VALID           (0x80000000)
++#define ADDR_FILTX_FB_TYPE            (0x40000000)
++#define ADDR_FILTX_FB_ADDRHI          (0x0000FFFF)
++#define ADDR_FILTX_SB_ADDRLO          (0xFFFFFFFF)
++
++#define WUCSR2                                (0x500)
++#define WUCSR2_NS_RCD                 (0x00000040)
++#define WUCSR2_ARP_RCD                        (0x00000020)
++#define WUCSR2_TCPSYN_RCD             (0x00000010)
++#define WUCSR2_NS_OFFLOAD             (0x00000004)
++#define WUCSR2_ARP_OFFLOAD            (0x00000002)
++#define WUCSR2_TCPSYN_OFFLOAD         (0x00000001)
++
++#define WOL_FIFO_STS                  (0x504)
++
++#define IPV6_ADDRX                    (0x510)
++
++#define IPV4_ADDRX                    (0x590)
++
++
++/* Vendor-specific PHY Definitions */
++
++/* Mode Control/Status Register */
++#define PHY_MODE_CTRL_STS             (17)
++#define MODE_CTRL_STS_EDPWRDOWN               ((u16)0x2000)
++#define MODE_CTRL_STS_ENERGYON                ((u16)0x0002)
++
++#define PHY_INT_SRC                   (29)
++#define PHY_INT_SRC_ENERGY_ON         ((u16)0x0080)
++#define PHY_INT_SRC_ANEG_COMP         ((u16)0x0040)
++#define PHY_INT_SRC_REMOTE_FAULT      ((u16)0x0020)
++#define PHY_INT_SRC_LINK_DOWN         ((u16)0x0010)
++#define PHY_INT_SRC_CLEAR_ALL         ((u16)0xffff)
++
++#define PHY_INT_MASK                  (30)
++#define PHY_INT_MASK_ENERGY_ON                ((u16)0x0080)
++#define PHY_INT_MASK_ANEG_COMP                ((u16)0x0040)
++#define PHY_INT_MASK_REMOTE_FAULT     ((u16)0x0020)
++#define PHY_INT_MASK_LINK_DOWN                ((u16)0x0010)
++#define PHY_INT_MASK_DEFAULT          (PHY_INT_MASK_ANEG_COMP | \
++                                       PHY_INT_MASK_LINK_DOWN)
++
++#define PHY_SPECIAL                   (31)
++#define PHY_SPECIAL_SPD                       ((u16)0x001C)
++#define PHY_SPECIAL_SPD_10HALF                ((u16)0x0004)
++#define PHY_SPECIAL_SPD_10FULL                ((u16)0x0014)
++#define PHY_SPECIAL_SPD_100HALF               ((u16)0x0008)
++#define PHY_SPECIAL_SPD_100FULL               ((u16)0x0018)
++
++/* USB Vendor Requests */
++#define USB_VENDOR_REQUEST_WRITE_REGISTER     0xA0
++#define USB_VENDOR_REQUEST_READ_REGISTER      0xA1
++#define USB_VENDOR_REQUEST_GET_STATS          0xA2
++
++/* Interrupt Endpoint status word bitfields */
++#define INT_ENP_RDFO_INT              ((u32)BIT(22))
++#define INT_ENP_TXE_INT                       ((u32)BIT(21))
++#define INT_ENP_TX_DIS_INT            ((u32)BIT(19))
++#define INT_ENP_RX_DIS_INT            ((u32)BIT(18))
++#define INT_ENP_PHY_INT                       ((u32)BIT(17))
++#define INT_ENP_MAC_ERR_INT           ((u32)BIT(15))
++#define INT_ENP_RX_FIFO_DATA_INT      ((u32)BIT(12))
++
++#endif /* _SMSC75XX_H */
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/smsc95xx.c backports-3.18.1-1/drivers/net/usb/smsc95xx.c
+--- backports-3.18.1-1.org/drivers/net/usb/smsc95xx.c  1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/smsc95xx.c      2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,2030 @@
++ /***************************************************************************
++ *
++ * Copyright (C) 2007-2008 SMSC
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ *
++ *****************************************************************************/
++
++#include <linux/module.h>
++#include <linux/kmod.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/bitrev.h>
++#include <linux/crc16.h>
++#include <linux/crc32.h>
++#include <linux/usb/usbnet.h>
++#include <linux/slab.h>
++#include "smsc95xx.h"
++
++#define SMSC_CHIPNAME                 "smsc95xx"
++#define SMSC_DRIVER_VERSION           "1.0.4"
++#define HS_USB_PKT_SIZE                       (512)
++#define FS_USB_PKT_SIZE                       (64)
++#define DEFAULT_HS_BURST_CAP_SIZE     (16 * 1024 + 5 * HS_USB_PKT_SIZE)
++#define DEFAULT_FS_BURST_CAP_SIZE     (6 * 1024 + 33 * FS_USB_PKT_SIZE)
++#define DEFAULT_BULK_IN_DELAY         (0x00002000)
++#define MAX_SINGLE_PACKET_SIZE                (2048)
++#define LAN95XX_EEPROM_MAGIC          (0x9500)
++#define EEPROM_MAC_OFFSET             (0x01)
++#define DEFAULT_TX_CSUM_ENABLE                (true)
++#define DEFAULT_RX_CSUM_ENABLE                (true)
++#define SMSC95XX_INTERNAL_PHY_ID      (1)
++#define SMSC95XX_TX_OVERHEAD          (8)
++#define SMSC95XX_TX_OVERHEAD_CSUM     (12)
++#define SUPPORTED_WAKE                        (WAKE_PHY | WAKE_UCAST | WAKE_BCAST | \
++                                       WAKE_MCAST | WAKE_ARP | WAKE_MAGIC)
++
++#define FEATURE_8_WAKEUP_FILTERS      (0x01)
++#define FEATURE_PHY_NLP_CROSSOVER     (0x02)
++#define FEATURE_REMOTE_WAKEUP         (0x04)
++
++#define SUSPEND_SUSPEND0              (0x01)
++#define SUSPEND_SUSPEND1              (0x02)
++#define SUSPEND_SUSPEND2              (0x04)
++#define SUSPEND_SUSPEND3              (0x08)
++#define SUSPEND_ALLMODES              (SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
++                                       SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3)
++
++struct smsc95xx_priv {
++      u32 mac_cr;
++      u32 hash_hi;
++      u32 hash_lo;
++      u32 wolopts;
++      spinlock_t mac_cr_lock;
++      u8 features;
++      u8 suspend_flags;
++};
++
++static bool turbo_mode = true;
++module_param(turbo_mode, bool, 0644);
++MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
++
++static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index,
++                                          u32 *data, int in_pm)
++{
++      u32 buf;
++      int ret;
++      int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
++
++      BUG_ON(!dev);
++
++      if (!in_pm)
++              fn = usbnet_read_cmd;
++      else
++              fn = usbnet_read_cmd_nopm;
++
++      ret = fn(dev, USB_VENDOR_REQUEST_READ_REGISTER, USB_DIR_IN
++               | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
++               0, index, &buf, 4);
++      if (unlikely(ret < 0))
++              netdev_warn(dev->net, "Failed to read reg index 0x%08x: %d\n",
++                          index, ret);
++
++      le32_to_cpus(&buf);
++      *data = buf;
++
++      return ret;
++}
++
++static int __must_check __smsc95xx_write_reg(struct usbnet *dev, u32 index,
++                                           u32 data, int in_pm)
++{
++      u32 buf;
++      int ret;
++      int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
++
++      BUG_ON(!dev);
++
++      if (!in_pm)
++              fn = usbnet_write_cmd;
++      else
++              fn = usbnet_write_cmd_nopm;
++
++      buf = data;
++      cpu_to_le32s(&buf);
++
++      ret = fn(dev, USB_VENDOR_REQUEST_WRITE_REGISTER, USB_DIR_OUT
++               | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
++               0, index, &buf, 4);
++      if (unlikely(ret < 0))
++              netdev_warn(dev->net, "Failed to write reg index 0x%08x: %d\n",
++                          index, ret);
++
++      return ret;
++}
++
++static int __must_check smsc95xx_read_reg_nopm(struct usbnet *dev, u32 index,
++                                             u32 *data)
++{
++      return __smsc95xx_read_reg(dev, index, data, 1);
++}
++
++static int __must_check smsc95xx_write_reg_nopm(struct usbnet *dev, u32 index,
++                                              u32 data)
++{
++      return __smsc95xx_write_reg(dev, index, data, 1);
++}
++
++static int __must_check smsc95xx_read_reg(struct usbnet *dev, u32 index,
++                                        u32 *data)
++{
++      return __smsc95xx_read_reg(dev, index, data, 0);
++}
++
++static int __must_check smsc95xx_write_reg(struct usbnet *dev, u32 index,
++                                         u32 data)
++{
++      return __smsc95xx_write_reg(dev, index, data, 0);
++}
++
++/* Loop until the read is completed with timeout
++ * called with phy_mutex held */
++static int __must_check __smsc95xx_phy_wait_not_busy(struct usbnet *dev,
++                                                   int in_pm)
++{
++      unsigned long start_time = jiffies;
++      u32 val;
++      int ret;
++
++      do {
++              ret = __smsc95xx_read_reg(dev, MII_ADDR, &val, in_pm);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading MII_ACCESS\n");
++                      return ret;
++              }
++
++              if (!(val & MII_BUSY_))
++                      return 0;
++      } while (!time_after(jiffies, start_time + HZ));
++
++      return -EIO;
++}
++
++static int __smsc95xx_mdio_read(struct net_device *netdev, int phy_id, int idx,
++                              int in_pm)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      u32 val, addr;
++      int ret;
++
++      mutex_lock(&dev->phy_mutex);
++
++      /* confirm MII not busy */
++      ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
++      if (ret < 0) {
++              netdev_warn(dev->net, "MII is busy in smsc95xx_mdio_read\n");
++              goto done;
++      }
++
++      /* set the address, index & direction (read from PHY) */
++      phy_id &= dev->mii.phy_id_mask;
++      idx &= dev->mii.reg_num_mask;
++      addr = (phy_id << 11) | (idx << 6) | MII_READ_ | MII_BUSY_;
++      ret = __smsc95xx_write_reg(dev, MII_ADDR, addr, in_pm);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing MII_ADDR\n");
++              goto done;
++      }
++
++      ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Timed out reading MII reg %02X\n", idx);
++              goto done;
++      }
++
++      ret = __smsc95xx_read_reg(dev, MII_DATA, &val, in_pm);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error reading MII_DATA\n");
++              goto done;
++      }
++
++      ret = (u16)(val & 0xFFFF);
++
++done:
++      mutex_unlock(&dev->phy_mutex);
++      return ret;
++}
++
++static void __smsc95xx_mdio_write(struct net_device *netdev, int phy_id,
++                                int idx, int regval, int in_pm)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      u32 val, addr;
++      int ret;
++
++      mutex_lock(&dev->phy_mutex);
++
++      /* confirm MII not busy */
++      ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
++      if (ret < 0) {
++              netdev_warn(dev->net, "MII is busy in smsc95xx_mdio_write\n");
++              goto done;
++      }
++
++      val = regval;
++      ret = __smsc95xx_write_reg(dev, MII_DATA, val, in_pm);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing MII_DATA\n");
++              goto done;
++      }
++
++      /* set the address, index & direction (write to PHY) */
++      phy_id &= dev->mii.phy_id_mask;
++      idx &= dev->mii.reg_num_mask;
++      addr = (phy_id << 11) | (idx << 6) | MII_WRITE_ | MII_BUSY_;
++      ret = __smsc95xx_write_reg(dev, MII_ADDR, addr, in_pm);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing MII_ADDR\n");
++              goto done;
++      }
++
++      ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Timed out writing MII reg %02X\n", idx);
++              goto done;
++      }
++
++done:
++      mutex_unlock(&dev->phy_mutex);
++}
++
++static int smsc95xx_mdio_read_nopm(struct net_device *netdev, int phy_id,
++                                 int idx)
++{
++      return __smsc95xx_mdio_read(netdev, phy_id, idx, 1);
++}
++
++static void smsc95xx_mdio_write_nopm(struct net_device *netdev, int phy_id,
++                                   int idx, int regval)
++{
++      __smsc95xx_mdio_write(netdev, phy_id, idx, regval, 1);
++}
++
++static int smsc95xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
++{
++      return __smsc95xx_mdio_read(netdev, phy_id, idx, 0);
++}
++
++static void smsc95xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
++                              int regval)
++{
++      __smsc95xx_mdio_write(netdev, phy_id, idx, regval, 0);
++}
++
++static int __must_check smsc95xx_wait_eeprom(struct usbnet *dev)
++{
++      unsigned long start_time = jiffies;
++      u32 val;
++      int ret;
++
++      do {
++              ret = smsc95xx_read_reg(dev, E2P_CMD, &val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading E2P_CMD\n");
++                      return ret;
++              }
++
++              if (!(val & E2P_CMD_BUSY_) || (val & E2P_CMD_TIMEOUT_))
++                      break;
++              udelay(40);
++      } while (!time_after(jiffies, start_time + HZ));
++
++      if (val & (E2P_CMD_TIMEOUT_ | E2P_CMD_BUSY_)) {
++              netdev_warn(dev->net, "EEPROM read operation timeout\n");
++              return -EIO;
++      }
++
++      return 0;
++}
++
++static int __must_check smsc95xx_eeprom_confirm_not_busy(struct usbnet *dev)
++{
++      unsigned long start_time = jiffies;
++      u32 val;
++      int ret;
++
++      do {
++              ret = smsc95xx_read_reg(dev, E2P_CMD, &val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading E2P_CMD\n");
++                      return ret;
++              }
++
++              if (!(val & E2P_CMD_BUSY_))
++                      return 0;
++
++              udelay(40);
++      } while (!time_after(jiffies, start_time + HZ));
++
++      netdev_warn(dev->net, "EEPROM is busy\n");
++      return -EIO;
++}
++
++static int smsc95xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length,
++                              u8 *data)
++{
++      u32 val;
++      int i, ret;
++
++      BUG_ON(!dev);
++      BUG_ON(!data);
++
++      ret = smsc95xx_eeprom_confirm_not_busy(dev);
++      if (ret)
++              return ret;
++
++      for (i = 0; i < length; i++) {
++              val = E2P_CMD_BUSY_ | E2P_CMD_READ_ | (offset & E2P_CMD_ADDR_);
++              ret = smsc95xx_write_reg(dev, E2P_CMD, val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing E2P_CMD\n");
++                      return ret;
++              }
++
++              ret = smsc95xx_wait_eeprom(dev);
++              if (ret < 0)
++                      return ret;
++
++              ret = smsc95xx_read_reg(dev, E2P_DATA, &val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error reading E2P_DATA\n");
++                      return ret;
++              }
++
++              data[i] = val & 0xFF;
++              offset++;
++      }
++
++      return 0;
++}
++
++static int smsc95xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length,
++                               u8 *data)
++{
++      u32 val;
++      int i, ret;
++
++      BUG_ON(!dev);
++      BUG_ON(!data);
++
++      ret = smsc95xx_eeprom_confirm_not_busy(dev);
++      if (ret)
++              return ret;
++
++      /* Issue write/erase enable command */
++      val = E2P_CMD_BUSY_ | E2P_CMD_EWEN_;
++      ret = smsc95xx_write_reg(dev, E2P_CMD, val);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Error writing E2P_DATA\n");
++              return ret;
++      }
++
++      ret = smsc95xx_wait_eeprom(dev);
++      if (ret < 0)
++              return ret;
++
++      for (i = 0; i < length; i++) {
++
++              /* Fill data register */
++              val = data[i];
++              ret = smsc95xx_write_reg(dev, E2P_DATA, val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing E2P_DATA\n");
++                      return ret;
++              }
++
++              /* Send "write" command */
++              val = E2P_CMD_BUSY_ | E2P_CMD_WRITE_ | (offset & E2P_CMD_ADDR_);
++              ret = smsc95xx_write_reg(dev, E2P_CMD, val);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "Error writing E2P_CMD\n");
++                      return ret;
++              }
++
++              ret = smsc95xx_wait_eeprom(dev);
++              if (ret < 0)
++                      return ret;
++
++              offset++;
++      }
++
++      return 0;
++}
++
++static int __must_check smsc95xx_write_reg_async(struct usbnet *dev, u16 index,
++                                               u32 data)
++{
++      const u16 size = 4;
++      u32 buf;
++      int ret;
++
++      buf = data;
++      cpu_to_le32s(&buf);
++
++      ret = usbnet_write_cmd_async(dev, USB_VENDOR_REQUEST_WRITE_REGISTER,
++                                   USB_DIR_OUT | USB_TYPE_VENDOR |
++                                   USB_RECIP_DEVICE,
++                                   0, index, &buf, size);
++      if (ret < 0)
++              netdev_warn(dev->net, "Error write async cmd, sts=%d\n",
++                          ret);
++      return ret;
++}
++
++/* returns hash bit number for given MAC address
++ * example:
++ * 01 00 5E 00 00 01 -> returns bit number 31 */
++static unsigned int smsc95xx_hash(char addr[ETH_ALEN])
++{
++      return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f;
++}
++
++static void smsc95xx_set_multicast(struct net_device *netdev)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++      unsigned long flags;
++      int ret;
++
++      pdata->hash_hi = 0;
++      pdata->hash_lo = 0;
++
++      spin_lock_irqsave(&pdata->mac_cr_lock, flags);
++
++      if (dev->net->flags & IFF_PROMISC) {
++              netif_dbg(dev, drv, dev->net, "promiscuous mode enabled\n");
++              pdata->mac_cr |= MAC_CR_PRMS_;
++              pdata->mac_cr &= ~(MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
++      } else if (dev->net->flags & IFF_ALLMULTI) {
++              netif_dbg(dev, drv, dev->net, "receive all multicast enabled\n");
++              pdata->mac_cr |= MAC_CR_MCPAS_;
++              pdata->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_HPFILT_);
++      } else if (!netdev_mc_empty(dev->net)) {
++              struct netdev_hw_addr *ha;
++
++              pdata->mac_cr |= MAC_CR_HPFILT_;
++              pdata->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_);
++
++              netdev_for_each_mc_addr(ha, netdev) {
++                      u32 bitnum = smsc95xx_hash(ha->addr);
++                      u32 mask = 0x01 << (bitnum & 0x1F);
++                      if (bitnum & 0x20)
++                              pdata->hash_hi |= mask;
++                      else
++                              pdata->hash_lo |= mask;
++              }
++
++              netif_dbg(dev, drv, dev->net, "HASHH=0x%08X, HASHL=0x%08X\n",
++                                 pdata->hash_hi, pdata->hash_lo);
++      } else {
++              netif_dbg(dev, drv, dev->net, "receive own packets only\n");
++              pdata->mac_cr &=
++                      ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
++      }
++
++      spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
++
++      /* Initiate async writes, as we can't wait for completion here */
++      ret = smsc95xx_write_reg_async(dev, HASHH, pdata->hash_hi);
++      if (ret < 0)
++              netdev_warn(dev->net, "failed to initiate async write to HASHH\n");
++
++      ret = smsc95xx_write_reg_async(dev, HASHL, pdata->hash_lo);
++      if (ret < 0)
++              netdev_warn(dev->net, "failed to initiate async write to HASHL\n");
++
++      ret = smsc95xx_write_reg_async(dev, MAC_CR, pdata->mac_cr);
++      if (ret < 0)
++              netdev_warn(dev->net, "failed to initiate async write to MAC_CR\n");
++}
++
++static int smsc95xx_phy_update_flowcontrol(struct usbnet *dev, u8 duplex,
++                                         u16 lcladv, u16 rmtadv)
++{
++      u32 flow, afc_cfg = 0;
++
++      int ret = smsc95xx_read_reg(dev, AFC_CFG, &afc_cfg);
++      if (ret < 0)
++              return ret;
++
++      if (duplex == DUPLEX_FULL) {
++              u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
++
++              if (cap & FLOW_CTRL_RX)
++                      flow = 0xFFFF0002;
++              else
++                      flow = 0;
++
++              if (cap & FLOW_CTRL_TX)
++                      afc_cfg |= 0xF;
++              else
++                      afc_cfg &= ~0xF;
++
++              netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s\n",
++                                 cap & FLOW_CTRL_RX ? "enabled" : "disabled",
++                                 cap & FLOW_CTRL_TX ? "enabled" : "disabled");
++      } else {
++              netif_dbg(dev, link, dev->net, "half duplex\n");
++              flow = 0;
++              afc_cfg |= 0xF;
++      }
++
++      ret = smsc95xx_write_reg(dev, FLOW, flow);
++      if (ret < 0)
++              return ret;
++
++      return smsc95xx_write_reg(dev, AFC_CFG, afc_cfg);
++}
++
++static int smsc95xx_link_reset(struct usbnet *dev)
++{
++      struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++      struct mii_if_info *mii = &dev->mii;
++      struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
++      unsigned long flags;
++      u16 lcladv, rmtadv;
++      int ret;
++
++      /* clear interrupt status */
++      ret = smsc95xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC);
++      if (ret < 0)
++              return ret;
++
++      ret = smsc95xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL_);
++      if (ret < 0)
++              return ret;
++
++      mii_check_media(mii, 1, 1);
++      mii_ethtool_gset(&dev->mii, &ecmd);
++      lcladv = smsc95xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
++      rmtadv = smsc95xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
++
++      netif_dbg(dev, link, dev->net,
++                "speed: %u duplex: %d lcladv: %04x rmtadv: %04x\n",
++                ethtool_cmd_speed(&ecmd), ecmd.duplex, lcladv, rmtadv);
++
++      spin_lock_irqsave(&pdata->mac_cr_lock, flags);
++      if (ecmd.duplex != DUPLEX_FULL) {
++              pdata->mac_cr &= ~MAC_CR_FDPX_;
++              pdata->mac_cr |= MAC_CR_RCVOWN_;
++      } else {
++              pdata->mac_cr &= ~MAC_CR_RCVOWN_;
++              pdata->mac_cr |= MAC_CR_FDPX_;
++      }
++      spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
++
++      ret = smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
++      if (ret < 0)
++              return ret;
++
++      ret = smsc95xx_phy_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
++      if (ret < 0)
++              netdev_warn(dev->net, "Error updating PHY flow control\n");
++
++      return ret;
++}
++
++static void smsc95xx_status(struct usbnet *dev, struct urb *urb)
++{
++      u32 intdata;
++
++      if (urb->actual_length != 4) {
++              netdev_warn(dev->net, "unexpected urb length %d\n",
++                          urb->actual_length);
++              return;
++      }
++
++      memcpy(&intdata, urb->transfer_buffer, 4);
++      le32_to_cpus(&intdata);
++
++      netif_dbg(dev, link, dev->net, "intdata: 0x%08X\n", intdata);
++
++      if (intdata & INT_ENP_PHY_INT_)
++              usbnet_defer_kevent(dev, EVENT_LINK_RESET);
++      else
++              netdev_warn(dev->net, "unexpected interrupt, intdata=0x%08X\n",
++                          intdata);
++}
++
++/* Enable or disable Tx & Rx checksum offload engines */
++static int smsc95xx_set_features(struct net_device *netdev,
++      netdev_features_t features)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      u32 read_buf;
++      int ret;
++
++      ret = smsc95xx_read_reg(dev, COE_CR, &read_buf);
++      if (ret < 0)
++              return ret;
++
++      if (features & NETIF_F_HW_CSUM)
++              read_buf |= Tx_COE_EN_;
++      else
++              read_buf &= ~Tx_COE_EN_;
++
++      if (features & NETIF_F_RXCSUM)
++              read_buf |= Rx_COE_EN_;
++      else
++              read_buf &= ~Rx_COE_EN_;
++
++      ret = smsc95xx_write_reg(dev, COE_CR, read_buf);
++      if (ret < 0)
++              return ret;
++
++      netif_dbg(dev, hw, dev->net, "COE_CR = 0x%08x\n", read_buf);
++      return 0;
++}
++
++static int smsc95xx_ethtool_get_eeprom_len(struct net_device *net)
++{
++      return MAX_EEPROM_SIZE;
++}
++
++static int smsc95xx_ethtool_get_eeprom(struct net_device *netdev,
++                                     struct ethtool_eeprom *ee, u8 *data)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++
++      ee->magic = LAN95XX_EEPROM_MAGIC;
++
++      return smsc95xx_read_eeprom(dev, ee->offset, ee->len, data);
++}
++
++static int smsc95xx_ethtool_set_eeprom(struct net_device *netdev,
++                                     struct ethtool_eeprom *ee, u8 *data)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++
++      if (ee->magic != LAN95XX_EEPROM_MAGIC) {
++              netdev_warn(dev->net, "EEPROM: magic value mismatch, magic = 0x%x\n",
++                          ee->magic);
++              return -EINVAL;
++      }
++
++      return smsc95xx_write_eeprom(dev, ee->offset, ee->len, data);
++}
++
++static int smsc95xx_ethtool_getregslen(struct net_device *netdev)
++{
++      /* all smsc95xx registers */
++      return COE_CR - ID_REV + sizeof(u32);
++}
++
++static void
++smsc95xx_ethtool_getregs(struct net_device *netdev, struct ethtool_regs *regs,
++                       void *buf)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      unsigned int i, j;
++      int retval;
++      u32 *data = buf;
++
++      retval = smsc95xx_read_reg(dev, ID_REV, &regs->version);
++      if (retval < 0) {
++              netdev_warn(netdev, "REGS: cannot read ID_REV\n");
++              return;
++      }
++
++      for (i = ID_REV, j = 0; i <= COE_CR; i += (sizeof(u32)), j++) {
++              retval = smsc95xx_read_reg(dev, i, &data[j]);
++              if (retval < 0) {
++                      netdev_warn(netdev, "REGS: cannot read reg[%x]\n", i);
++                      return;
++              }
++      }
++}
++
++static void smsc95xx_ethtool_get_wol(struct net_device *net,
++                                   struct ethtool_wolinfo *wolinfo)
++{
++      struct usbnet *dev = netdev_priv(net);
++      struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++
++      wolinfo->supported = SUPPORTED_WAKE;
++      wolinfo->wolopts = pdata->wolopts;
++}
++
++static int smsc95xx_ethtool_set_wol(struct net_device *net,
++                                  struct ethtool_wolinfo *wolinfo)
++{
++      struct usbnet *dev = netdev_priv(net);
++      struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++      int ret;
++
++      pdata->wolopts = wolinfo->wolopts & SUPPORTED_WAKE;
++
++      ret = device_set_wakeup_enable(&dev->udev->dev, pdata->wolopts);
++      if (ret < 0)
++              netdev_warn(dev->net, "device_set_wakeup_enable error %d\n", ret);
++
++      return ret;
++}
++
++static const struct ethtool_ops smsc95xx_ethtool_ops = {
++      .get_link       = usbnet_get_link,
++      .nway_reset     = usbnet_nway_reset,
++      .get_drvinfo    = usbnet_get_drvinfo,
++      .get_msglevel   = usbnet_get_msglevel,
++      .set_msglevel   = usbnet_set_msglevel,
++      .get_settings   = usbnet_get_settings,
++      .set_settings   = usbnet_set_settings,
++      .get_eeprom_len = smsc95xx_ethtool_get_eeprom_len,
++      .get_eeprom     = smsc95xx_ethtool_get_eeprom,
++      .set_eeprom     = smsc95xx_ethtool_set_eeprom,
++      .get_regs_len   = smsc95xx_ethtool_getregslen,
++      .get_regs       = smsc95xx_ethtool_getregs,
++      .get_wol        = smsc95xx_ethtool_get_wol,
++      .set_wol        = smsc95xx_ethtool_set_wol,
++};
++
++static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++
++      if (!netif_running(netdev))
++              return -EINVAL;
++
++      return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
++}
++
++static void smsc95xx_init_mac_address(struct usbnet *dev)
++{
++      /* try reading mac address from EEPROM */
++      if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
++                      dev->net->dev_addr) == 0) {
++              if (is_valid_ether_addr(dev->net->dev_addr)) {
++                      /* eeprom values are valid so use them */
++                      netif_dbg(dev, ifup, dev->net, "MAC address read from EEPROM\n");
++                      return;
++              }
++      }
++
++      /* no eeprom, or eeprom values are invalid. generate random MAC */
++      eth_hw_addr_random(dev->net);
++      netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n");
++}
++
++static int smsc95xx_set_mac_address(struct usbnet *dev)
++{
++      u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 |
++              dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24;
++      u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8;
++      int ret;
++
++      ret = smsc95xx_write_reg(dev, ADDRL, addr_lo);
++      if (ret < 0)
++              return ret;
++
++      return smsc95xx_write_reg(dev, ADDRH, addr_hi);
++}
++
++/* starts the TX path */
++static int smsc95xx_start_tx_path(struct usbnet *dev)
++{
++      struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++      unsigned long flags;
++      int ret;
++
++      /* Enable Tx at MAC */
++      spin_lock_irqsave(&pdata->mac_cr_lock, flags);
++      pdata->mac_cr |= MAC_CR_TXEN_;
++      spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
++
++      ret = smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
++      if (ret < 0)
++              return ret;
++
++      /* Enable Tx at SCSRs */
++      return smsc95xx_write_reg(dev, TX_CFG, TX_CFG_ON_);
++}
++
++/* Starts the Receive path */
++static int smsc95xx_start_rx_path(struct usbnet *dev, int in_pm)
++{
++      struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++      unsigned long flags;
++
++      spin_lock_irqsave(&pdata->mac_cr_lock, flags);
++      pdata->mac_cr |= MAC_CR_RXEN_;
++      spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
++
++      return __smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr, in_pm);
++}
++
++static int smsc95xx_phy_initialize(struct usbnet *dev)
++{
++      int bmcr, ret, timeout = 0;
++
++      /* Initialize MII structure */
++      dev->mii.dev = dev->net;
++      dev->mii.mdio_read = smsc95xx_mdio_read;
++      dev->mii.mdio_write = smsc95xx_mdio_write;
++      dev->mii.phy_id_mask = 0x1f;
++      dev->mii.reg_num_mask = 0x1f;
++      dev->mii.phy_id = SMSC95XX_INTERNAL_PHY_ID;
++
++      /* reset phy and wait for reset to complete */
++      smsc95xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
++
++      do {
++              msleep(10);
++              bmcr = smsc95xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
++              timeout++;
++      } while ((bmcr & BMCR_RESET) && (timeout < 100));
++
++      if (timeout >= 100) {
++              netdev_warn(dev->net, "timeout on PHY Reset");
++              return -EIO;
++      }
++
++      smsc95xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
++              ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
++              ADVERTISE_PAUSE_ASYM);
++
++      /* read to clear */
++      ret = smsc95xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to read PHY_INT_SRC during init\n");
++              return ret;
++      }
++
++      smsc95xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK,
++              PHY_INT_MASK_DEFAULT_);
++      mii_nway_restart(&dev->mii);
++
++      netif_dbg(dev, ifup, dev->net, "phy initialised successfully\n");
++      return 0;
++}
++
++static int smsc95xx_reset(struct usbnet *dev)
++{
++      struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++      u32 read_buf, write_buf, burst_cap;
++      int ret = 0, timeout;
++
++      netif_dbg(dev, ifup, dev->net, "entering smsc95xx_reset\n");
++
++      ret = smsc95xx_write_reg(dev, HW_CFG, HW_CFG_LRST_);
++      if (ret < 0)
++              return ret;
++
++      timeout = 0;
++      do {
++              msleep(10);
++              ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
++              if (ret < 0)
++                      return ret;
++              timeout++;
++      } while ((read_buf & HW_CFG_LRST_) && (timeout < 100));
++
++      if (timeout >= 100) {
++              netdev_warn(dev->net, "timeout waiting for completion of Lite Reset\n");
++              return ret;
++      }
++
++      ret = smsc95xx_write_reg(dev, PM_CTRL, PM_CTL_PHY_RST_);
++      if (ret < 0)
++              return ret;
++
++      timeout = 0;
++      do {
++              msleep(10);
++              ret = smsc95xx_read_reg(dev, PM_CTRL, &read_buf);
++              if (ret < 0)
++                      return ret;
++              timeout++;
++      } while ((read_buf & PM_CTL_PHY_RST_) && (timeout < 100));
++
++      if (timeout >= 100) {
++              netdev_warn(dev->net, "timeout waiting for PHY Reset\n");
++              return ret;
++      }
++
++      ret = smsc95xx_set_mac_address(dev);
++      if (ret < 0)
++              return ret;
++
++      netif_dbg(dev, ifup, dev->net, "MAC Address: %pM\n",
++                dev->net->dev_addr);
++
++      ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
++      if (ret < 0)
++              return ret;
++
++      netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x\n",
++                read_buf);
++
++      read_buf |= HW_CFG_BIR_;
++
++      ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
++      if (ret < 0)
++              return ret;
++
++      ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
++      if (ret < 0)
++              return ret;
++
++      netif_dbg(dev, ifup, dev->net,
++                "Read Value from HW_CFG after writing HW_CFG_BIR_: 0x%08x\n",
++                read_buf);
++
++      if (!turbo_mode) {
++              burst_cap = 0;
++              dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
++      } else if (dev->udev->speed == USB_SPEED_HIGH) {
++              burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
++              dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
++      } else {
++              burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
++              dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
++      }
++
++      netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld\n",
++                (ulong)dev->rx_urb_size);
++
++      ret = smsc95xx_write_reg(dev, BURST_CAP, burst_cap);
++      if (ret < 0)
++              return ret;
++
++      ret = smsc95xx_read_reg(dev, BURST_CAP, &read_buf);
++      if (ret < 0)
++              return ret;
++
++      netif_dbg(dev, ifup, dev->net,
++                "Read Value from BURST_CAP after writing: 0x%08x\n",
++                read_buf);
++
++      ret = smsc95xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
++      if (ret < 0)
++              return ret;
++
++      ret = smsc95xx_read_reg(dev, BULK_IN_DLY, &read_buf);
++      if (ret < 0)
++              return ret;
++
++      netif_dbg(dev, ifup, dev->net,
++                "Read Value from BULK_IN_DLY after writing: 0x%08x\n",
++                read_buf);
++
++      ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
++      if (ret < 0)
++              return ret;
++
++      netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG: 0x%08x\n",
++                read_buf);
++
++      if (turbo_mode)
++              read_buf |= (HW_CFG_MEF_ | HW_CFG_BCE_);
++
++      read_buf &= ~HW_CFG_RXDOFF_;
++
++      /* set Rx data offset=2, Make IP header aligns on word boundary. */
++      read_buf |= NET_IP_ALIGN << 9;
++
++      ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
++      if (ret < 0)
++              return ret;
++
++      ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
++      if (ret < 0)
++              return ret;
++
++      netif_dbg(dev, ifup, dev->net,
++                "Read Value from HW_CFG after writing: 0x%08x\n", read_buf);
++
++      ret = smsc95xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL_);
++      if (ret < 0)
++              return ret;
++
++      ret = smsc95xx_read_reg(dev, ID_REV, &read_buf);
++      if (ret < 0)
++              return ret;
++      netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x\n", read_buf);
++
++      /* Configure GPIO pins as LED outputs */
++      write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
++              LED_GPIO_CFG_FDX_LED;
++      ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf);
++      if (ret < 0)
++              return ret;
++
++      /* Init Tx */
++      ret = smsc95xx_write_reg(dev, FLOW, 0);
++      if (ret < 0)
++              return ret;
++
++      ret = smsc95xx_write_reg(dev, AFC_CFG, AFC_CFG_DEFAULT);
++      if (ret < 0)
++              return ret;
++
++      /* Don't need mac_cr_lock during initialisation */
++      ret = smsc95xx_read_reg(dev, MAC_CR, &pdata->mac_cr);
++      if (ret < 0)
++              return ret;
++
++      /* Init Rx */
++      /* Set Vlan */
++      ret = smsc95xx_write_reg(dev, VLAN1, (u32)ETH_P_8021Q);
++      if (ret < 0)
++              return ret;
++
++      /* Enable or disable checksum offload engines */
++      ret = smsc95xx_set_features(dev->net, dev->net->features);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to set checksum offload features\n");
++              return ret;
++      }
++
++      smsc95xx_set_multicast(dev->net);
++
++      ret = smsc95xx_phy_initialize(dev);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to init PHY\n");
++              return ret;
++      }
++
++      ret = smsc95xx_read_reg(dev, INT_EP_CTL, &read_buf);
++      if (ret < 0)
++              return ret;
++
++      /* enable PHY interrupts */
++      read_buf |= INT_EP_CTL_PHY_INT_;
++
++      ret = smsc95xx_write_reg(dev, INT_EP_CTL, read_buf);
++      if (ret < 0)
++              return ret;
++
++      ret = smsc95xx_start_tx_path(dev);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to start TX path\n");
++              return ret;
++      }
++
++      ret = smsc95xx_start_rx_path(dev, 0);
++      if (ret < 0) {
++              netdev_warn(dev->net, "Failed to start RX path\n");
++              return ret;
++      }
++
++      netif_dbg(dev, ifup, dev->net, "smsc95xx_reset, return 0\n");
++      return 0;
++}
++
++static const struct net_device_ops smsc95xx_netdev_ops = {
++      .ndo_open               = usbnet_open,
++      .ndo_stop               = usbnet_stop,
++      .ndo_start_xmit         = usbnet_start_xmit,
++      .ndo_tx_timeout         = usbnet_tx_timeout,
++      .ndo_change_mtu         = usbnet_change_mtu,
++      .ndo_set_mac_address    = eth_mac_addr,
++      .ndo_validate_addr      = eth_validate_addr,
++      .ndo_do_ioctl           = smsc95xx_ioctl,
++      .ndo_set_rx_mode        = smsc95xx_set_multicast,
++      .ndo_set_features       = smsc95xx_set_features,
++};
++
++static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      struct smsc95xx_priv *pdata = NULL;
++      u32 val;
++      int ret;
++
++      printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n");
++
++      ret = usbnet_get_endpoints(dev, intf);
++      if (ret < 0) {
++              netdev_warn(dev->net, "usbnet_get_endpoints failed: %d\n", ret);
++              return ret;
++      }
++
++      dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc95xx_priv),
++                                            GFP_KERNEL);
++
++      pdata = (struct smsc95xx_priv *)(dev->data[0]);
++      if (!pdata)
++              return -ENOMEM;
++
++      spin_lock_init(&pdata->mac_cr_lock);
++
++      if (DEFAULT_TX_CSUM_ENABLE)
++              dev->net->features |= NETIF_F_HW_CSUM;
++      if (DEFAULT_RX_CSUM_ENABLE)
++              dev->net->features |= NETIF_F_RXCSUM;
++
++      dev->net->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
++
++      smsc95xx_init_mac_address(dev);
++
++      /* Init all registers */
++      ret = smsc95xx_reset(dev);
++
++      /* detect device revision as different features may be available */
++      ret = smsc95xx_read_reg(dev, ID_REV, &val);
++      if (ret < 0)
++              return ret;
++      val >>= 16;
++
++      if ((val == ID_REV_CHIP_ID_9500A_) || (val == ID_REV_CHIP_ID_9530_) ||
++          (val == ID_REV_CHIP_ID_89530_) || (val == ID_REV_CHIP_ID_9730_))
++              pdata->features = (FEATURE_8_WAKEUP_FILTERS |
++                      FEATURE_PHY_NLP_CROSSOVER |
++                      FEATURE_REMOTE_WAKEUP);
++      else if (val == ID_REV_CHIP_ID_9512_)
++              pdata->features = FEATURE_8_WAKEUP_FILTERS;
++
++      dev->net->netdev_ops = &smsc95xx_netdev_ops;
++      dev->net->ethtool_ops = &smsc95xx_ethtool_ops;
++      dev->net->flags |= IFF_MULTICAST;
++      dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM;
++      dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
++      return 0;
++}
++
++static void smsc95xx_unbind(struct usbnet *dev, struct usb_interface *intf)
++{
++      struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++      if (pdata) {
++              netif_dbg(dev, ifdown, dev->net, "free pdata\n");
++              kfree(pdata);
++              pdata = NULL;
++              dev->data[0] = 0;
++      }
++}
++
++static u32 smsc_crc(const u8 *buffer, size_t len, int filter)
++{
++      u32 crc = bitrev16(crc16(0xFFFF, buffer, len));
++      return crc << ((filter % 2) * 16);
++}
++
++static int smsc95xx_enable_phy_wakeup_interrupts(struct usbnet *dev, u16 mask)
++{
++      struct mii_if_info *mii = &dev->mii;
++      int ret;
++
++      netdev_dbg(dev->net, "enabling PHY wakeup interrupts\n");
++
++      /* read to clear */
++      ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_SRC);
++      if (ret < 0)
++              return ret;
++
++      /* enable interrupt source */
++      ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_MASK);
++      if (ret < 0)
++              return ret;
++
++      ret |= mask;
++
++      smsc95xx_mdio_write_nopm(dev->net, mii->phy_id, PHY_INT_MASK, ret);
++
++      return 0;
++}
++
++static int smsc95xx_link_ok_nopm(struct usbnet *dev)
++{
++      struct mii_if_info *mii = &dev->mii;
++      int ret;
++
++      /* first, a dummy read, needed to latch some MII phys */
++      ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR);
++      if (ret < 0)
++              return ret;
++
++      ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR);
++      if (ret < 0)
++              return ret;
++
++      return !!(ret & BMSR_LSTATUS);
++}
++
++static int smsc95xx_enter_suspend0(struct usbnet *dev)
++{
++      struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++      u32 val;
++      int ret;
++
++      ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
++      if (ret < 0)
++              return ret;
++
++      val &= (~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_));
++      val |= PM_CTL_SUS_MODE_0;
++
++      ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
++      if (ret < 0)
++              return ret;
++
++      /* clear wol status */
++      val &= ~PM_CTL_WUPS_;
++      val |= PM_CTL_WUPS_WOL_;
++
++      /* enable energy detection */
++      if (pdata->wolopts & WAKE_PHY)
++              val |= PM_CTL_WUPS_ED_;
++
++      ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
++      if (ret < 0)
++              return ret;
++
++      /* read back PM_CTRL */
++      ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
++      if (ret < 0)
++              return ret;
++
++      pdata->suspend_flags |= SUSPEND_SUSPEND0;
++
++      return 0;
++}
++
++static int smsc95xx_enter_suspend1(struct usbnet *dev)
++{
++      struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++      struct mii_if_info *mii = &dev->mii;
++      u32 val;
++      int ret;
++
++      /* reconfigure link pulse detection timing for
++       * compatibility with non-standard link partners
++       */
++      if (pdata->features & FEATURE_PHY_NLP_CROSSOVER)
++              smsc95xx_mdio_write_nopm(dev->net, mii->phy_id, PHY_EDPD_CONFIG,
++                      PHY_EDPD_CONFIG_DEFAULT);
++
++      /* enable energy detect power-down mode */
++      ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_MODE_CTRL_STS);
++      if (ret < 0)
++              return ret;
++
++      ret |= MODE_CTRL_STS_EDPWRDOWN_;
++
++      smsc95xx_mdio_write_nopm(dev->net, mii->phy_id, PHY_MODE_CTRL_STS, ret);
++
++      /* enter SUSPEND1 mode */
++      ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
++      if (ret < 0)
++              return ret;
++
++      val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
++      val |= PM_CTL_SUS_MODE_1;
++
++      ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
++      if (ret < 0)
++              return ret;
++
++      /* clear wol status, enable energy detection */
++      val &= ~PM_CTL_WUPS_;
++      val |= (PM_CTL_WUPS_ED_ | PM_CTL_ED_EN_);
++
++      ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
++      if (ret < 0)
++              return ret;
++
++      pdata->suspend_flags |= SUSPEND_SUSPEND1;
++
++      return 0;
++}
++
++static int smsc95xx_enter_suspend2(struct usbnet *dev)
++{
++      struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++      u32 val;
++      int ret;
++
++      ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
++      if (ret < 0)
++              return ret;
++
++      val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
++      val |= PM_CTL_SUS_MODE_2;
++
++      ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
++      if (ret < 0)
++              return ret;
++
++      pdata->suspend_flags |= SUSPEND_SUSPEND2;
++
++      return 0;
++}
++
++static int smsc95xx_enter_suspend3(struct usbnet *dev)
++{
++      struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++      u32 val;
++      int ret;
++
++      ret = smsc95xx_read_reg_nopm(dev, RX_FIFO_INF, &val);
++      if (ret < 0)
++              return ret;
++
++      if (val & 0xFFFF) {
++              netdev_info(dev->net, "rx fifo not empty in autosuspend\n");
++              return -EBUSY;
++      }
++
++      ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
++      if (ret < 0)
++              return ret;
++
++      val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
++      val |= PM_CTL_SUS_MODE_3 | PM_CTL_RES_CLR_WKP_STS;
++
++      ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
++      if (ret < 0)
++              return ret;
++
++      /* clear wol status */
++      val &= ~PM_CTL_WUPS_;
++      val |= PM_CTL_WUPS_WOL_;
++
++      ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
++      if (ret < 0)
++              return ret;
++
++      pdata->suspend_flags |= SUSPEND_SUSPEND3;
++
++      return 0;
++}
++
++static int smsc95xx_autosuspend(struct usbnet *dev, u32 link_up)
++{
++      struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++      int ret;
++
++      if (!netif_running(dev->net)) {
++              /* interface is ifconfig down so fully power down hw */
++              netdev_dbg(dev->net, "autosuspend entering SUSPEND2\n");
++              return smsc95xx_enter_suspend2(dev);
++      }
++
++      if (!link_up) {
++              /* link is down so enter EDPD mode, but only if device can
++               * reliably resume from it.  This check should be redundant
++               * as current FEATURE_REMOTE_WAKEUP parts also support
++               * FEATURE_PHY_NLP_CROSSOVER but it's included for clarity */
++              if (!(pdata->features & FEATURE_PHY_NLP_CROSSOVER)) {
++                      netdev_warn(dev->net, "EDPD not supported\n");
++                      return -EBUSY;
++              }
++
++              netdev_dbg(dev->net, "autosuspend entering SUSPEND1\n");
++
++              /* enable PHY wakeup events for if cable is attached */
++              ret = smsc95xx_enable_phy_wakeup_interrupts(dev,
++                      PHY_INT_MASK_ANEG_COMP_);
++              if (ret < 0) {
++                      netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
++                      return ret;
++              }
++
++              netdev_info(dev->net, "entering SUSPEND1 mode\n");
++              return smsc95xx_enter_suspend1(dev);
++      }
++
++      /* enable PHY wakeup events so we remote wakeup if cable is pulled */
++      ret = smsc95xx_enable_phy_wakeup_interrupts(dev,
++              PHY_INT_MASK_LINK_DOWN_);
++      if (ret < 0) {
++              netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
++              return ret;
++      }
++
++      netdev_dbg(dev->net, "autosuspend entering SUSPEND3\n");
++      return smsc95xx_enter_suspend3(dev);
++}
++
++static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message)
++{
++      struct usbnet *dev = usb_get_intfdata(intf);
++      struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++      u32 val, link_up;
++      int ret;
++
++      ret = usbnet_suspend(intf, message);
++      if (ret < 0) {
++              netdev_warn(dev->net, "usbnet_suspend error\n");
++              return ret;
++      }
++
++      if (pdata->suspend_flags) {
++              netdev_warn(dev->net, "error during last resume\n");
++              pdata->suspend_flags = 0;
++      }
++
++      /* determine if link is up using only _nopm functions */
++      link_up = smsc95xx_link_ok_nopm(dev);
++
++      if (message.event == PM_EVENT_AUTO_SUSPEND &&
++          (pdata->features & FEATURE_REMOTE_WAKEUP)) {
++              ret = smsc95xx_autosuspend(dev, link_up);
++              goto done;
++      }
++
++      /* if we get this far we're not autosuspending */
++      /* if no wol options set, or if link is down and we're not waking on
++       * PHY activity, enter lowest power SUSPEND2 mode
++       */
++      if (!(pdata->wolopts & SUPPORTED_WAKE) ||
++              !(link_up || (pdata->wolopts & WAKE_PHY))) {
++              netdev_info(dev->net, "entering SUSPEND2 mode\n");
++
++              /* disable energy detect (link up) & wake up events */
++              ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
++              if (ret < 0)
++                      goto done;
++
++              val &= ~(WUCSR_MPEN_ | WUCSR_WAKE_EN_);
++
++              ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
++              if (ret < 0)
++                      goto done;
++
++              ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
++              if (ret < 0)
++                      goto done;
++
++              val &= ~(PM_CTL_ED_EN_ | PM_CTL_WOL_EN_);
++
++              ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
++              if (ret < 0)
++                      goto done;
++
++              ret = smsc95xx_enter_suspend2(dev);
++              goto done;
++      }
++
++      if (pdata->wolopts & WAKE_PHY) {
++              ret = smsc95xx_enable_phy_wakeup_interrupts(dev,
++                      (PHY_INT_MASK_ANEG_COMP_ | PHY_INT_MASK_LINK_DOWN_));
++              if (ret < 0) {
++                      netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
++                      goto done;
++              }
++
++              /* if link is down then configure EDPD and enter SUSPEND1,
++               * otherwise enter SUSPEND0 below
++               */
++              if (!link_up) {
++                      netdev_info(dev->net, "entering SUSPEND1 mode\n");
++                      ret = smsc95xx_enter_suspend1(dev);
++                      goto done;
++              }
++      }
++
++      if (pdata->wolopts & (WAKE_BCAST | WAKE_MCAST | WAKE_ARP | WAKE_UCAST)) {
++              u32 *filter_mask = kzalloc(sizeof(u32) * 32, GFP_KERNEL);
++              u32 command[2];
++              u32 offset[2];
++              u32 crc[4];
++              int wuff_filter_count =
++                      (pdata->features & FEATURE_8_WAKEUP_FILTERS) ?
++                      LAN9500A_WUFF_NUM : LAN9500_WUFF_NUM;
++              int i, filter = 0;
++
++              if (!filter_mask) {
++                      netdev_warn(dev->net, "Unable to allocate filter_mask\n");
++                      ret = -ENOMEM;
++                      goto done;
++              }
++
++              memset(command, 0, sizeof(command));
++              memset(offset, 0, sizeof(offset));
++              memset(crc, 0, sizeof(crc));
++
++              if (pdata->wolopts & WAKE_BCAST) {
++                      const u8 bcast[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
++                      netdev_info(dev->net, "enabling broadcast detection\n");
++                      filter_mask[filter * 4] = 0x003F;
++                      filter_mask[filter * 4 + 1] = 0x00;
++                      filter_mask[filter * 4 + 2] = 0x00;
++                      filter_mask[filter * 4 + 3] = 0x00;
++                      command[filter/4] |= 0x05UL << ((filter % 4) * 8);
++                      offset[filter/4] |= 0x00 << ((filter % 4) * 8);
++                      crc[filter/2] |= smsc_crc(bcast, 6, filter);
++                      filter++;
++              }
++
++              if (pdata->wolopts & WAKE_MCAST) {
++                      const u8 mcast[] = {0x01, 0x00, 0x5E};
++                      netdev_info(dev->net, "enabling multicast detection\n");
++                      filter_mask[filter * 4] = 0x0007;
++                      filter_mask[filter * 4 + 1] = 0x00;
++                      filter_mask[filter * 4 + 2] = 0x00;
++                      filter_mask[filter * 4 + 3] = 0x00;
++                      command[filter/4] |= 0x09UL << ((filter % 4) * 8);
++                      offset[filter/4] |= 0x00  << ((filter % 4) * 8);
++                      crc[filter/2] |= smsc_crc(mcast, 3, filter);
++                      filter++;
++              }
++
++              if (pdata->wolopts & WAKE_ARP) {
++                      const u8 arp[] = {0x08, 0x06};
++                      netdev_info(dev->net, "enabling ARP detection\n");
++                      filter_mask[filter * 4] = 0x0003;
++                      filter_mask[filter * 4 + 1] = 0x00;
++                      filter_mask[filter * 4 + 2] = 0x00;
++                      filter_mask[filter * 4 + 3] = 0x00;
++                      command[filter/4] |= 0x05UL << ((filter % 4) * 8);
++                      offset[filter/4] |= 0x0C << ((filter % 4) * 8);
++                      crc[filter/2] |= smsc_crc(arp, 2, filter);
++                      filter++;
++              }
++
++              if (pdata->wolopts & WAKE_UCAST) {
++                      netdev_info(dev->net, "enabling unicast detection\n");
++                      filter_mask[filter * 4] = 0x003F;
++                      filter_mask[filter * 4 + 1] = 0x00;
++                      filter_mask[filter * 4 + 2] = 0x00;
++                      filter_mask[filter * 4 + 3] = 0x00;
++                      command[filter/4] |= 0x01UL << ((filter % 4) * 8);
++                      offset[filter/4] |= 0x00 << ((filter % 4) * 8);
++                      crc[filter/2] |= smsc_crc(dev->net->dev_addr, ETH_ALEN, filter);
++                      filter++;
++              }
++
++              for (i = 0; i < (wuff_filter_count * 4); i++) {
++                      ret = smsc95xx_write_reg_nopm(dev, WUFF, filter_mask[i]);
++                      if (ret < 0) {
++                              kfree(filter_mask);
++                              goto done;
++                      }
++              }
++              kfree(filter_mask);
++
++              for (i = 0; i < (wuff_filter_count / 4); i++) {
++                      ret = smsc95xx_write_reg_nopm(dev, WUFF, command[i]);
++                      if (ret < 0)
++                              goto done;
++              }
++
++              for (i = 0; i < (wuff_filter_count / 4); i++) {
++                      ret = smsc95xx_write_reg_nopm(dev, WUFF, offset[i]);
++                      if (ret < 0)
++                              goto done;
++              }
++
++              for (i = 0; i < (wuff_filter_count / 2); i++) {
++                      ret = smsc95xx_write_reg_nopm(dev, WUFF, crc[i]);
++                      if (ret < 0)
++                              goto done;
++              }
++
++              /* clear any pending pattern match packet status */
++              ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
++              if (ret < 0)
++                      goto done;
++
++              val |= WUCSR_WUFR_;
++
++              ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
++              if (ret < 0)
++                      goto done;
++      }
++
++      if (pdata->wolopts & WAKE_MAGIC) {
++              /* clear any pending magic packet status */
++              ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
++              if (ret < 0)
++                      goto done;
++
++              val |= WUCSR_MPR_;
++
++              ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
++              if (ret < 0)
++                      goto done;
++      }
++
++      /* enable/disable wakeup sources */
++      ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
++      if (ret < 0)
++              goto done;
++
++      if (pdata->wolopts & (WAKE_BCAST | WAKE_MCAST | WAKE_ARP | WAKE_UCAST)) {
++              netdev_info(dev->net, "enabling pattern match wakeup\n");
++              val |= WUCSR_WAKE_EN_;
++      } else {
++              netdev_info(dev->net, "disabling pattern match wakeup\n");
++              val &= ~WUCSR_WAKE_EN_;
++      }
++
++      if (pdata->wolopts & WAKE_MAGIC) {
++              netdev_info(dev->net, "enabling magic packet wakeup\n");
++              val |= WUCSR_MPEN_;
++      } else {
++              netdev_info(dev->net, "disabling magic packet wakeup\n");
++              val &= ~WUCSR_MPEN_;
++      }
++
++      ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
++      if (ret < 0)
++              goto done;
++
++      /* enable wol wakeup source */
++      ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
++      if (ret < 0)
++              goto done;
++
++      val |= PM_CTL_WOL_EN_;
++
++      /* phy energy detect wakeup source */
++      if (pdata->wolopts & WAKE_PHY)
++              val |= PM_CTL_ED_EN_;
++
++      ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
++      if (ret < 0)
++              goto done;
++
++      /* enable receiver to enable frame reception */
++      smsc95xx_start_rx_path(dev, 1);
++
++      /* some wol options are enabled, so enter SUSPEND0 */
++      netdev_info(dev->net, "entering SUSPEND0 mode\n");
++      ret = smsc95xx_enter_suspend0(dev);
++
++done:
++      /*
++       * TODO: resume() might need to handle the suspend failure
++       * in system sleep
++       */
++      if (ret && PMSG_IS_AUTO(message))
++              usbnet_resume(intf);
++      return ret;
++}
++
++static int smsc95xx_resume(struct usb_interface *intf)
++{
++      struct usbnet *dev = usb_get_intfdata(intf);
++      struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++      u8 suspend_flags = pdata->suspend_flags;
++      int ret;
++      u32 val;
++
++      BUG_ON(!dev);
++
++      netdev_dbg(dev->net, "resume suspend_flags=0x%02x\n", suspend_flags);
++
++      /* do this first to ensure it's cleared even in error case */
++      pdata->suspend_flags = 0;
++
++      if (suspend_flags & SUSPEND_ALLMODES) {
++              /* clear wake-up sources */
++              ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
++              if (ret < 0)
++                      return ret;
++
++              val &= ~(WUCSR_WAKE_EN_ | WUCSR_MPEN_);
++
++              ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
++              if (ret < 0)
++                      return ret;
++
++              /* clear wake-up status */
++              ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
++              if (ret < 0)
++                      return ret;
++
++              val &= ~PM_CTL_WOL_EN_;
++              val |= PM_CTL_WUPS_;
++
++              ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
++              if (ret < 0)
++                      return ret;
++      }
++
++      ret = usbnet_resume(intf);
++      if (ret < 0)
++              netdev_warn(dev->net, "usbnet_resume error\n");
++
++      return ret;
++}
++
++static int smsc95xx_reset_resume(struct usb_interface *intf)
++{
++      struct usbnet *dev = usb_get_intfdata(intf);
++      int ret;
++
++      ret = smsc95xx_reset(dev);
++      if (ret < 0)
++              return ret;
++
++      return smsc95xx_resume(intf);
++}
++
++static void smsc95xx_rx_csum_offload(struct sk_buff *skb)
++{
++      skb->csum = *(u16 *)(skb_tail_pointer(skb) - 2);
++      skb->ip_summed = CHECKSUM_COMPLETE;
++      skb_trim(skb, skb->len - 2);
++}
++
++static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
++{
++      /* This check is no longer done by usbnet */
++      if (skb->len < dev->net->hard_header_len)
++              return 0;
++
++      while (skb->len > 0) {
++              u32 header, align_count;
++              struct sk_buff *ax_skb;
++              unsigned char *packet;
++              u16 size;
++
++              memcpy(&header, skb->data, sizeof(header));
++              le32_to_cpus(&header);
++              skb_pull(skb, 4 + NET_IP_ALIGN);
++              packet = skb->data;
++
++              /* get the packet length */
++              size = (u16)((header & RX_STS_FL_) >> 16);
++              align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4;
++
++              if (unlikely(header & RX_STS_ES_)) {
++                      netif_dbg(dev, rx_err, dev->net,
++                                "Error header=0x%08x\n", header);
++                      dev->net->stats.rx_errors++;
++                      dev->net->stats.rx_dropped++;
++
++                      if (header & RX_STS_CRC_) {
++                              dev->net->stats.rx_crc_errors++;
++                      } else {
++                              if (header & (RX_STS_TL_ | RX_STS_RF_))
++                                      dev->net->stats.rx_frame_errors++;
++
++                              if ((header & RX_STS_LE_) &&
++                                      (!(header & RX_STS_FT_)))
++                                      dev->net->stats.rx_length_errors++;
++                      }
++              } else {
++                      /* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
++                      if (unlikely(size > (ETH_FRAME_LEN + 12))) {
++                              netif_dbg(dev, rx_err, dev->net,
++                                        "size err header=0x%08x\n", header);
++                              return 0;
++                      }
++
++                      /* last frame in this batch */
++                      if (skb->len == size) {
++                              if (dev->net->features & NETIF_F_RXCSUM)
++                                      smsc95xx_rx_csum_offload(skb);
++                              skb_trim(skb, skb->len - 4); /* remove fcs */
++                              skb->truesize = size + sizeof(struct sk_buff);
++
++                              return 1;
++                      }
++
++                      ax_skb = skb_clone(skb, GFP_ATOMIC);
++                      if (unlikely(!ax_skb)) {
++                              netdev_warn(dev->net, "Error allocating skb\n");
++                              return 0;
++                      }
++
++                      ax_skb->len = size;
++                      ax_skb->data = packet;
++                      skb_set_tail_pointer(ax_skb, size);
++
++                      if (dev->net->features & NETIF_F_RXCSUM)
++                              smsc95xx_rx_csum_offload(ax_skb);
++                      skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
++                      ax_skb->truesize = size + sizeof(struct sk_buff);
++
++                      usbnet_skb_return(dev, ax_skb);
++              }
++
++              skb_pull(skb, size);
++
++              /* padding bytes before the next frame starts */
++              if (skb->len)
++                      skb_pull(skb, align_count);
++      }
++
++      if (unlikely(skb->len < 0)) {
++              netdev_warn(dev->net, "invalid rx length<0 %d\n", skb->len);
++              return 0;
++      }
++
++      return 1;
++}
++
++static u32 smsc95xx_calc_csum_preamble(struct sk_buff *skb)
++{
++      u16 low_16 = (u16)skb_checksum_start_offset(skb);
++      u16 high_16 = low_16 + skb->csum_offset;
++      return (high_16 << 16) | low_16;
++}
++
++static struct sk_buff *smsc95xx_tx_fixup(struct usbnet *dev,
++                                       struct sk_buff *skb, gfp_t flags)
++{
++      bool csum = skb->ip_summed == CHECKSUM_PARTIAL;
++      int overhead = csum ? SMSC95XX_TX_OVERHEAD_CSUM : SMSC95XX_TX_OVERHEAD;
++      u32 tx_cmd_a, tx_cmd_b;
++
++      /* We do not advertise SG, so skbs should be already linearized */
++      BUG_ON(skb_shinfo(skb)->nr_frags);
++
++      if (skb_headroom(skb) < overhead) {
++              struct sk_buff *skb2 = skb_copy_expand(skb,
++                      overhead, 0, flags);
++              dev_kfree_skb_any(skb);
++              skb = skb2;
++              if (!skb)
++                      return NULL;
++      }
++
++      if (csum) {
++              if (skb->len <= 45) {
++                      /* workaround - hardware tx checksum does not work
++                       * properly with extremely small packets */
++                      long csstart = skb_checksum_start_offset(skb);
++                      __wsum calc = csum_partial(skb->data + csstart,
++                              skb->len - csstart, 0);
++                      *((__sum16 *)(skb->data + csstart
++                              + skb->csum_offset)) = csum_fold(calc);
++
++                      csum = false;
++              } else {
++                      u32 csum_preamble = smsc95xx_calc_csum_preamble(skb);
++                      skb_push(skb, 4);
++                      cpu_to_le32s(&csum_preamble);
++                      memcpy(skb->data, &csum_preamble, 4);
++              }
++      }
++
++      skb_push(skb, 4);
++      tx_cmd_b = (u32)(skb->len - 4);
++      if (csum)
++              tx_cmd_b |= TX_CMD_B_CSUM_ENABLE;
++      cpu_to_le32s(&tx_cmd_b);
++      memcpy(skb->data, &tx_cmd_b, 4);
++
++      skb_push(skb, 4);
++      tx_cmd_a = (u32)(skb->len - 8) | TX_CMD_A_FIRST_SEG_ |
++              TX_CMD_A_LAST_SEG_;
++      cpu_to_le32s(&tx_cmd_a);
++      memcpy(skb->data, &tx_cmd_a, 4);
++
++      return skb;
++}
++
++static int smsc95xx_manage_power(struct usbnet *dev, int on)
++{
++      struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++
++      dev->intf->needs_remote_wakeup = on;
++
++      if (pdata->features & FEATURE_REMOTE_WAKEUP)
++              return 0;
++
++      /* this chip revision isn't capable of remote wakeup */
++      netdev_info(dev->net, "hardware isn't capable of remote wakeup\n");
++
++      if (on)
++              usb_autopm_get_interface_no_resume(dev->intf);
++      else
++              usb_autopm_put_interface(dev->intf);
++
++      return 0;
++}
++
++static const struct driver_info smsc95xx_info = {
++      .description    = "smsc95xx USB 2.0 Ethernet",
++      .bind           = smsc95xx_bind,
++      .unbind         = smsc95xx_unbind,
++      .link_reset     = smsc95xx_link_reset,
++      .reset          = smsc95xx_reset,
++      .rx_fixup       = smsc95xx_rx_fixup,
++      .tx_fixup       = smsc95xx_tx_fixup,
++      .status         = smsc95xx_status,
++      .manage_power   = smsc95xx_manage_power,
++      .flags          = FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR,
++};
++
++static const struct usb_device_id products[] = {
++      {
++              /* SMSC9500 USB Ethernet Device */
++              USB_DEVICE(0x0424, 0x9500),
++              .driver_info = (unsigned long) &smsc95xx_info,
++      },
++      {
++              /* SMSC9505 USB Ethernet Device */
++              USB_DEVICE(0x0424, 0x9505),
++              .driver_info = (unsigned long) &smsc95xx_info,
++      },
++      {
++              /* SMSC9500A USB Ethernet Device */
++              USB_DEVICE(0x0424, 0x9E00),
++              .driver_info = (unsigned long) &smsc95xx_info,
++      },
++      {
++              /* SMSC9505A USB Ethernet Device */
++              USB_DEVICE(0x0424, 0x9E01),
++              .driver_info = (unsigned long) &smsc95xx_info,
++      },
++      {
++              /* SMSC9512/9514 USB Hub & Ethernet Device */
++              USB_DEVICE(0x0424, 0xec00),
++              .driver_info = (unsigned long) &smsc95xx_info,
++      },
++      {
++              /* SMSC9500 USB Ethernet Device (SAL10) */
++              USB_DEVICE(0x0424, 0x9900),
++              .driver_info = (unsigned long) &smsc95xx_info,
++      },
++      {
++              /* SMSC9505 USB Ethernet Device (SAL10) */
++              USB_DEVICE(0x0424, 0x9901),
++              .driver_info = (unsigned long) &smsc95xx_info,
++      },
++      {
++              /* SMSC9500A USB Ethernet Device (SAL10) */
++              USB_DEVICE(0x0424, 0x9902),
++              .driver_info = (unsigned long) &smsc95xx_info,
++      },
++      {
++              /* SMSC9505A USB Ethernet Device (SAL10) */
++              USB_DEVICE(0x0424, 0x9903),
++              .driver_info = (unsigned long) &smsc95xx_info,
++      },
++      {
++              /* SMSC9512/9514 USB Hub & Ethernet Device (SAL10) */
++              USB_DEVICE(0x0424, 0x9904),
++              .driver_info = (unsigned long) &smsc95xx_info,
++      },
++      {
++              /* SMSC9500A USB Ethernet Device (HAL) */
++              USB_DEVICE(0x0424, 0x9905),
++              .driver_info = (unsigned long) &smsc95xx_info,
++      },
++      {
++              /* SMSC9505A USB Ethernet Device (HAL) */
++              USB_DEVICE(0x0424, 0x9906),
++              .driver_info = (unsigned long) &smsc95xx_info,
++      },
++      {
++              /* SMSC9500 USB Ethernet Device (Alternate ID) */
++              USB_DEVICE(0x0424, 0x9907),
++              .driver_info = (unsigned long) &smsc95xx_info,
++      },
++      {
++              /* SMSC9500A USB Ethernet Device (Alternate ID) */
++              USB_DEVICE(0x0424, 0x9908),
++              .driver_info = (unsigned long) &smsc95xx_info,
++      },
++      {
++              /* SMSC9512/9514 USB Hub & Ethernet Device (Alternate ID) */
++              USB_DEVICE(0x0424, 0x9909),
++              .driver_info = (unsigned long) &smsc95xx_info,
++      },
++      {
++              /* SMSC LAN9530 USB Ethernet Device */
++              USB_DEVICE(0x0424, 0x9530),
++              .driver_info = (unsigned long) &smsc95xx_info,
++      },
++      {
++              /* SMSC LAN9730 USB Ethernet Device */
++              USB_DEVICE(0x0424, 0x9730),
++              .driver_info = (unsigned long) &smsc95xx_info,
++      },
++      {
++              /* SMSC LAN89530 USB Ethernet Device */
++              USB_DEVICE(0x0424, 0x9E08),
++              .driver_info = (unsigned long) &smsc95xx_info,
++      },
++      { },            /* END */
++};
++MODULE_DEVICE_TABLE(usb, products);
++
++static struct usb_driver smsc95xx_driver = {
++      .name           = "smsc95xx",
++      .id_table       = products,
++      .probe          = usbnet_probe,
++      .suspend        = smsc95xx_suspend,
++      .resume         = smsc95xx_resume,
++      .reset_resume   = smsc95xx_reset_resume,
++      .disconnect     = usbnet_disconnect,
++      .disable_hub_initiated_lpm = 1,
++      .supports_autosuspend = 1,
++};
++
++module_usb_driver(smsc95xx_driver);
++
++MODULE_AUTHOR("Nancy Lin");
++MODULE_AUTHOR("Steve Glendinning <steve.glendinning@shawell.net>");
++MODULE_DESCRIPTION("SMSC95XX USB 2.0 Ethernet Devices");
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/smsc95xx.h backports-3.18.1-1/drivers/net/usb/smsc95xx.h
+--- backports-3.18.1-1.org/drivers/net/usb/smsc95xx.h  1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/smsc95xx.h      2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,290 @@
++ /***************************************************************************
++ *
++ * Copyright (C) 2007-2008 SMSC
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ *
++ *****************************************************************************/
++
++#ifndef _SMSC95XX_H
++#define _SMSC95XX_H
++
++/* Tx command words */
++#define TX_CMD_A_DATA_OFFSET_         (0x001F0000)
++#define TX_CMD_A_FIRST_SEG_           (0x00002000)
++#define TX_CMD_A_LAST_SEG_            (0x00001000)
++#define TX_CMD_A_BUF_SIZE_            (0x000007FF)
++
++#define TX_CMD_B_CSUM_ENABLE          (0x00004000)
++#define TX_CMD_B_ADD_CRC_DISABLE_     (0x00002000)
++#define TX_CMD_B_DISABLE_PADDING_     (0x00001000)
++#define TX_CMD_B_PKT_BYTE_LENGTH_     (0x000007FF)
++
++/* Rx status word */
++#define RX_STS_FF_                    (0x40000000)    /* Filter Fail */
++#define RX_STS_FL_                    (0x3FFF0000)    /* Frame Length */
++#define RX_STS_ES_                    (0x00008000)    /* Error Summary */
++#define RX_STS_BF_                    (0x00002000)    /* Broadcast Frame */
++#define RX_STS_LE_                    (0x00001000)    /* Length Error */
++#define RX_STS_RF_                    (0x00000800)    /* Runt Frame */
++#define RX_STS_MF_                    (0x00000400)    /* Multicast Frame */
++#define RX_STS_TL_                    (0x00000080)    /* Frame too long */
++#define RX_STS_CS_                    (0x00000040)    /* Collision Seen */
++#define RX_STS_FT_                    (0x00000020)    /* Frame Type */
++#define RX_STS_RW_                    (0x00000010)    /* Receive Watchdog */
++#define RX_STS_ME_                    (0x00000008)    /* Mii Error */
++#define RX_STS_DB_                    (0x00000004)    /* Dribbling */
++#define RX_STS_CRC_                   (0x00000002)    /* CRC Error */
++
++/* SCSRs */
++#define ID_REV                                (0x00)
++#define ID_REV_CHIP_ID_MASK_          (0xFFFF0000)
++#define ID_REV_CHIP_REV_MASK_         (0x0000FFFF)
++#define ID_REV_CHIP_ID_9500_          (0x9500)
++#define ID_REV_CHIP_ID_9500A_         (0x9E00)
++#define ID_REV_CHIP_ID_9512_          (0xEC00)
++#define ID_REV_CHIP_ID_9530_          (0x9530)
++#define ID_REV_CHIP_ID_89530_         (0x9E08)
++#define ID_REV_CHIP_ID_9730_          (0x9730)
++
++#define INT_STS                               (0x08)
++#define INT_STS_TX_STOP_              (0x00020000)
++#define INT_STS_RX_STOP_              (0x00010000)
++#define INT_STS_PHY_INT_              (0x00008000)
++#define INT_STS_TXE_                  (0x00004000)
++#define INT_STS_TDFU_                 (0x00002000)
++#define INT_STS_TDFO_                 (0x00001000)
++#define INT_STS_RXDF_                 (0x00000800)
++#define INT_STS_GPIOS_                        (0x000007FF)
++#define INT_STS_CLEAR_ALL_            (0xFFFFFFFF)
++
++#define RX_CFG                                (0x0C)
++#define RX_FIFO_FLUSH_                        (0x00000001)
++
++#define TX_CFG                                (0x10)
++#define TX_CFG_ON_                    (0x00000004)
++#define TX_CFG_STOP_                  (0x00000002)
++#define TX_CFG_FIFO_FLUSH_            (0x00000001)
++
++#define HW_CFG                                (0x14)
++#define HW_CFG_BIR_                   (0x00001000)
++#define HW_CFG_LEDB_                  (0x00000800)
++#define HW_CFG_RXDOFF_                        (0x00000600)
++#define HW_CFG_DRP_                   (0x00000040)
++#define HW_CFG_MEF_                   (0x00000020)
++#define HW_CFG_LRST_                  (0x00000008)
++#define HW_CFG_PSEL_                  (0x00000004)
++#define HW_CFG_BCE_                   (0x00000002)
++#define HW_CFG_SRST_                  (0x00000001)
++
++#define RX_FIFO_INF                   (0x18)
++
++#define PM_CTRL                               (0x20)
++#define PM_CTL_RES_CLR_WKP_STS                (0x00000200)
++#define PM_CTL_DEV_RDY_                       (0x00000080)
++#define PM_CTL_SUS_MODE_              (0x00000060)
++#define PM_CTL_SUS_MODE_0             (0x00000000)
++#define PM_CTL_SUS_MODE_1             (0x00000020)
++#define PM_CTL_SUS_MODE_2             (0x00000040)
++#define PM_CTL_SUS_MODE_3             (0x00000060)
++#define PM_CTL_PHY_RST_                       (0x00000010)
++#define PM_CTL_WOL_EN_                        (0x00000008)
++#define PM_CTL_ED_EN_                 (0x00000004)
++#define PM_CTL_WUPS_                  (0x00000003)
++#define PM_CTL_WUPS_NO_                       (0x00000000)
++#define PM_CTL_WUPS_ED_                       (0x00000001)
++#define PM_CTL_WUPS_WOL_              (0x00000002)
++#define PM_CTL_WUPS_MULTI_            (0x00000003)
++
++#define LED_GPIO_CFG                  (0x24)
++#define LED_GPIO_CFG_SPD_LED          (0x01000000)
++#define LED_GPIO_CFG_LNK_LED          (0x00100000)
++#define LED_GPIO_CFG_FDX_LED          (0x00010000)
++
++#define GPIO_CFG                      (0x28)
++
++#define AFC_CFG                               (0x2C)
++
++/* Hi watermark = 15.5Kb (~10 mtu pkts) */
++/* low watermark = 3k (~2 mtu pkts) */
++/* backpressure duration = ~ 350us */
++/* Apply FC on any frame. */
++#define AFC_CFG_DEFAULT                       (0x00F830A1)
++
++#define E2P_CMD                               (0x30)
++#define E2P_CMD_BUSY_                 (0x80000000)
++#define E2P_CMD_MASK_                 (0x70000000)
++#define E2P_CMD_READ_                 (0x00000000)
++#define E2P_CMD_EWDS_                 (0x10000000)
++#define E2P_CMD_EWEN_                 (0x20000000)
++#define E2P_CMD_WRITE_                        (0x30000000)
++#define E2P_CMD_WRAL_                 (0x40000000)
++#define E2P_CMD_ERASE_                        (0x50000000)
++#define E2P_CMD_ERAL_                 (0x60000000)
++#define E2P_CMD_RELOAD_                       (0x70000000)
++#define E2P_CMD_TIMEOUT_              (0x00000400)
++#define E2P_CMD_LOADED_                       (0x00000200)
++#define E2P_CMD_ADDR_                 (0x000001FF)
++
++#define MAX_EEPROM_SIZE                       (512)
++
++#define E2P_DATA                      (0x34)
++#define E2P_DATA_MASK_                        (0x000000FF)
++
++#define BURST_CAP                     (0x38)
++
++#define GPIO_WAKE                     (0x64)
++
++#define INT_EP_CTL                    (0x68)
++#define INT_EP_CTL_INTEP_             (0x80000000)
++#define INT_EP_CTL_MACRTO_            (0x00080000)
++#define INT_EP_CTL_TX_STOP_           (0x00020000)
++#define INT_EP_CTL_RX_STOP_           (0x00010000)
++#define INT_EP_CTL_PHY_INT_           (0x00008000)
++#define INT_EP_CTL_TXE_                       (0x00004000)
++#define INT_EP_CTL_TDFU_              (0x00002000)
++#define INT_EP_CTL_TDFO_              (0x00001000)
++#define INT_EP_CTL_RXDF_              (0x00000800)
++#define INT_EP_CTL_GPIOS_             (0x000007FF)
++
++#define BULK_IN_DLY                   (0x6C)
++
++/* MAC CSRs */
++#define MAC_CR                                (0x100)
++#define MAC_CR_RXALL_                 (0x80000000)
++#define MAC_CR_RCVOWN_                        (0x00800000)
++#define MAC_CR_LOOPBK_                        (0x00200000)
++#define MAC_CR_FDPX_                  (0x00100000)
++#define MAC_CR_MCPAS_                 (0x00080000)
++#define MAC_CR_PRMS_                  (0x00040000)
++#define MAC_CR_INVFILT_                       (0x00020000)
++#define MAC_CR_PASSBAD_                       (0x00010000)
++#define MAC_CR_HFILT_                 (0x00008000)
++#define MAC_CR_HPFILT_                        (0x00002000)
++#define MAC_CR_LCOLL_                 (0x00001000)
++#define MAC_CR_BCAST_                 (0x00000800)
++#define MAC_CR_DISRTY_                        (0x00000400)
++#define MAC_CR_PADSTR_                        (0x00000100)
++#define MAC_CR_BOLMT_MASK             (0x000000C0)
++#define MAC_CR_DFCHK_                 (0x00000020)
++#define MAC_CR_TXEN_                  (0x00000008)
++#define MAC_CR_RXEN_                  (0x00000004)
++
++#define ADDRH                         (0x104)
++
++#define ADDRL                         (0x108)
++
++#define HASHH                         (0x10C)
++
++#define HASHL                         (0x110)
++
++#define MII_ADDR                      (0x114)
++#define MII_WRITE_                    (0x02)
++#define MII_BUSY_                     (0x01)
++#define MII_READ_                     (0x00) /* ~of MII Write bit */
++
++#define MII_DATA                      (0x118)
++
++#define FLOW                          (0x11C)
++#define FLOW_FCPT_                    (0xFFFF0000)
++#define FLOW_FCPASS_                  (0x00000004)
++#define FLOW_FCEN_                    (0x00000002)
++#define FLOW_FCBSY_                   (0x00000001)
++
++#define VLAN1                         (0x120)
++
++#define VLAN2                         (0x124)
++
++#define WUFF                          (0x128)
++#define LAN9500_WUFF_NUM              (4)
++#define LAN9500A_WUFF_NUM             (8)
++
++#define WUCSR                         (0x12C)
++#define WUCSR_WFF_PTR_RST_            (0x80000000)
++#define WUCSR_GUE_                    (0x00000200)
++#define WUCSR_WUFR_                   (0x00000040)
++#define WUCSR_MPR_                    (0x00000020)
++#define WUCSR_WAKE_EN_                        (0x00000004)
++#define WUCSR_MPEN_                   (0x00000002)
++
++#define COE_CR                                (0x130)
++#define Tx_COE_EN_                    (0x00010000)
++#define Rx_COE_MODE_                  (0x00000002)
++#define Rx_COE_EN_                    (0x00000001)
++
++/* Vendor-specific PHY Definitions */
++
++/* EDPD NLP / crossover time configuration (LAN9500A only) */
++#define PHY_EDPD_CONFIG                       (16)
++#define PHY_EDPD_CONFIG_TX_NLP_EN_    ((u16)0x8000)
++#define PHY_EDPD_CONFIG_TX_NLP_1000_  ((u16)0x0000)
++#define PHY_EDPD_CONFIG_TX_NLP_768_   ((u16)0x2000)
++#define PHY_EDPD_CONFIG_TX_NLP_512_   ((u16)0x4000)
++#define PHY_EDPD_CONFIG_TX_NLP_256_   ((u16)0x6000)
++#define PHY_EDPD_CONFIG_RX_1_NLP_     ((u16)0x1000)
++#define PHY_EDPD_CONFIG_RX_NLP_64_    ((u16)0x0000)
++#define PHY_EDPD_CONFIG_RX_NLP_256_   ((u16)0x0400)
++#define PHY_EDPD_CONFIG_RX_NLP_512_   ((u16)0x0800)
++#define PHY_EDPD_CONFIG_RX_NLP_1000_  ((u16)0x0C00)
++#define PHY_EDPD_CONFIG_EXT_CROSSOVER_        ((u16)0x0001)
++#define PHY_EDPD_CONFIG_DEFAULT               (PHY_EDPD_CONFIG_TX_NLP_EN_ | \
++                                       PHY_EDPD_CONFIG_TX_NLP_768_ | \
++                                       PHY_EDPD_CONFIG_RX_1_NLP_)
++
++/* Mode Control/Status Register */
++#define PHY_MODE_CTRL_STS             (17)
++#define MODE_CTRL_STS_EDPWRDOWN_      ((u16)0x2000)
++#define MODE_CTRL_STS_ENERGYON_               ((u16)0x0002)
++
++#define SPECIAL_CTRL_STS              (27)
++#define SPECIAL_CTRL_STS_OVRRD_AMDIX_ ((u16)0x8000)
++#define SPECIAL_CTRL_STS_AMDIX_ENABLE_        ((u16)0x4000)
++#define SPECIAL_CTRL_STS_AMDIX_STATE_ ((u16)0x2000)
++
++#define PHY_INT_SRC                   (29)
++#define PHY_INT_SRC_ENERGY_ON_                ((u16)0x0080)
++#define PHY_INT_SRC_ANEG_COMP_                ((u16)0x0040)
++#define PHY_INT_SRC_REMOTE_FAULT_     ((u16)0x0020)
++#define PHY_INT_SRC_LINK_DOWN_                ((u16)0x0010)
++
++#define PHY_INT_MASK                  (30)
++#define PHY_INT_MASK_ENERGY_ON_               ((u16)0x0080)
++#define PHY_INT_MASK_ANEG_COMP_               ((u16)0x0040)
++#define PHY_INT_MASK_REMOTE_FAULT_    ((u16)0x0020)
++#define PHY_INT_MASK_LINK_DOWN_               ((u16)0x0010)
++#define PHY_INT_MASK_DEFAULT_         (PHY_INT_MASK_ANEG_COMP_ | \
++                                       PHY_INT_MASK_LINK_DOWN_)
++
++#define PHY_SPECIAL                   (31)
++#define PHY_SPECIAL_SPD_              ((u16)0x001C)
++#define PHY_SPECIAL_SPD_10HALF_               ((u16)0x0004)
++#define PHY_SPECIAL_SPD_10FULL_               ((u16)0x0014)
++#define PHY_SPECIAL_SPD_100HALF_      ((u16)0x0008)
++#define PHY_SPECIAL_SPD_100FULL_      ((u16)0x0018)
++
++/* USB Vendor Requests */
++#define USB_VENDOR_REQUEST_WRITE_REGISTER     0xA0
++#define USB_VENDOR_REQUEST_READ_REGISTER      0xA1
++#define USB_VENDOR_REQUEST_GET_STATS          0xA2
++
++/* Interrupt Endpoint status word bitfields */
++#define INT_ENP_TX_STOP_              ((u32)BIT(17))
++#define INT_ENP_RX_STOP_              ((u32)BIT(16))
++#define INT_ENP_PHY_INT_              ((u32)BIT(15))
++#define INT_ENP_TXE_                  ((u32)BIT(14))
++#define INT_ENP_TDFU_                 ((u32)BIT(13))
++#define INT_ENP_TDFO_                 ((u32)BIT(12))
++#define INT_ENP_RXDF_                 ((u32)BIT(11))
++
++#endif /* _SMSC95XX_H */
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/sr9700.c backports-3.18.1-1/drivers/net/usb/sr9700.c
+--- backports-3.18.1-1.org/drivers/net/usb/sr9700.c    1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/sr9700.c        2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,559 @@
++/*
++ * CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices
++ *
++ * Author : Liu Junliang <liujunliang_ljl@163.com>
++ *
++ * Based on dm9601.c
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2.  This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include <linux/module.h>
++#include <linux/sched.h>
++#include <linux/stddef.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/crc32.h>
++#include <linux/usb/usbnet.h>
++
++#include "sr9700.h"
++
++static int sr_read(struct usbnet *dev, u8 reg, u16 length, void *data)
++{
++      int err;
++
++      err = usbnet_read_cmd(dev, SR_RD_REGS, SR_REQ_RD_REG, 0, reg, data,
++                            length);
++      if ((err != length) && (err >= 0))
++              err = -EINVAL;
++      return err;
++}
++
++static int sr_write(struct usbnet *dev, u8 reg, u16 length, void *data)
++{
++      int err;
++
++      err = usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG, 0, reg, data,
++                             length);
++      if ((err >= 0) && (err < length))
++              err = -EINVAL;
++      return err;
++}
++
++static int sr_read_reg(struct usbnet *dev, u8 reg, u8 *value)
++{
++      return sr_read(dev, reg, 1, value);
++}
++
++static int sr_write_reg(struct usbnet *dev, u8 reg, u8 value)
++{
++      return usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG,
++                              value, reg, NULL, 0);
++}
++
++static void sr_write_async(struct usbnet *dev, u8 reg, u16 length, void *data)
++{
++      usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG,
++                             0, reg, data, length);
++}
++
++static void sr_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
++{
++      usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG,
++                             value, reg, NULL, 0);
++}
++
++static int wait_phy_eeprom_ready(struct usbnet *dev, int phy)
++{
++      int i;
++
++      for (i = 0; i < SR_SHARE_TIMEOUT; i++) {
++              u8 tmp = 0;
++              int ret;
++
++              udelay(1);
++              ret = sr_read_reg(dev, EPCR, &tmp);
++              if (ret < 0)
++                      return ret;
++
++              /* ready */
++              if (!(tmp & EPCR_ERRE))
++                      return 0;
++      }
++
++      netdev_err(dev->net, "%s write timed out!\n", phy ? "phy" : "eeprom");
++
++      return -EIO;
++}
++
++static int sr_share_read_word(struct usbnet *dev, int phy, u8 reg,
++                            __le16 *value)
++{
++      int ret;
++
++      mutex_lock(&dev->phy_mutex);
++
++      sr_write_reg(dev, EPAR, phy ? (reg | EPAR_PHY_ADR) : reg);
++      sr_write_reg(dev, EPCR, phy ? (EPCR_EPOS | EPCR_ERPRR) : EPCR_ERPRR);
++
++      ret = wait_phy_eeprom_ready(dev, phy);
++      if (ret < 0)
++              goto out_unlock;
++
++      sr_write_reg(dev, EPCR, 0x0);
++      ret = sr_read(dev, EPDR, 2, value);
++
++      netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n",
++                 phy, reg, *value, ret);
++
++out_unlock:
++      mutex_unlock(&dev->phy_mutex);
++      return ret;
++}
++
++static int sr_share_write_word(struct usbnet *dev, int phy, u8 reg,
++                             __le16 value)
++{
++      int ret;
++
++      mutex_lock(&dev->phy_mutex);
++
++      ret = sr_write(dev, EPDR, 2, &value);
++      if (ret < 0)
++              goto out_unlock;
++
++      sr_write_reg(dev, EPAR, phy ? (reg | EPAR_PHY_ADR) : reg);
++      sr_write_reg(dev, EPCR, phy ? (EPCR_WEP | EPCR_EPOS | EPCR_ERPRW) :
++                  (EPCR_WEP | EPCR_ERPRW));
++
++      ret = wait_phy_eeprom_ready(dev, phy);
++      if (ret < 0)
++              goto out_unlock;
++
++      sr_write_reg(dev, EPCR, 0x0);
++
++out_unlock:
++      mutex_unlock(&dev->phy_mutex);
++      return ret;
++}
++
++static int sr_read_eeprom_word(struct usbnet *dev, u8 offset, void *value)
++{
++      return sr_share_read_word(dev, 0, offset, value);
++}
++
++static int sr9700_get_eeprom_len(struct net_device *netdev)
++{
++      return SR_EEPROM_LEN;
++}
++
++static int sr9700_get_eeprom(struct net_device *netdev,
++                           struct ethtool_eeprom *eeprom, u8 *data)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      __le16 *buf = (__le16 *)data;
++      int ret = 0;
++      int i;
++
++      /* access is 16bit */
++      if ((eeprom->offset & 0x01) || (eeprom->len & 0x01))
++              return -EINVAL;
++
++      for (i = 0; i < eeprom->len / 2; i++) {
++              ret = sr_read_eeprom_word(dev, eeprom->offset / 2 + i, buf + i);
++              if (ret < 0)
++                      break;
++      }
++
++      return ret;
++}
++
++static int sr_mdio_read(struct net_device *netdev, int phy_id, int loc)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      __le16 res;
++      int rc = 0;
++
++      if (phy_id) {
++              netdev_dbg(netdev, "Only internal phy supported\n");
++              return 0;
++      }
++
++      /* Access NSR_LINKST bit for link status instead of MII_BMSR */
++      if (loc == MII_BMSR) {
++              u8 value;
++
++              sr_read_reg(dev, NSR, &value);
++              if (value & NSR_LINKST)
++                      rc = 1;
++      }
++      sr_share_read_word(dev, 1, loc, &res);
++      if (rc == 1)
++              res = le16_to_cpu(res) | BMSR_LSTATUS;
++      else
++              res = le16_to_cpu(res) & ~BMSR_LSTATUS;
++
++      netdev_dbg(netdev, "sr_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
++                 phy_id, loc, res);
++
++      return res;
++}
++
++static void sr_mdio_write(struct net_device *netdev, int phy_id, int loc,
++                        int val)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      __le16 res = cpu_to_le16(val);
++
++      if (phy_id) {
++              netdev_dbg(netdev, "Only internal phy supported\n");
++              return;
++      }
++
++      netdev_dbg(netdev, "sr_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
++                 phy_id, loc, val);
++
++      sr_share_write_word(dev, 1, loc, res);
++}
++
++static u32 sr9700_get_link(struct net_device *netdev)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      u8 value = 0;
++      int rc = 0;
++
++      /* Get the Link Status directly */
++      sr_read_reg(dev, NSR, &value);
++      if (value & NSR_LINKST)
++              rc = 1;
++
++      return rc;
++}
++
++static int sr9700_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++
++      return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
++}
++
++static const struct ethtool_ops sr9700_ethtool_ops = {
++      .get_drvinfo    = usbnet_get_drvinfo,
++      .get_link       = sr9700_get_link,
++      .get_msglevel   = usbnet_get_msglevel,
++      .set_msglevel   = usbnet_set_msglevel,
++      .get_eeprom_len = sr9700_get_eeprom_len,
++      .get_eeprom     = sr9700_get_eeprom,
++      .get_settings   = usbnet_get_settings,
++      .set_settings   = usbnet_set_settings,
++      .nway_reset     = usbnet_nway_reset,
++};
++
++static void sr9700_set_multicast(struct net_device *netdev)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      /* We use the 20 byte dev->data for our 8 byte filter buffer
++       * to avoid allocating memory that is tricky to free later
++       */
++      u8 *hashes = (u8 *)&dev->data;
++      /* rx_ctl setting : enable, disable_long, disable_crc */
++      u8 rx_ctl = RCR_RXEN | RCR_DIS_CRC | RCR_DIS_LONG;
++
++      memset(hashes, 0x00, SR_MCAST_SIZE);
++      /* broadcast address */
++      hashes[SR_MCAST_SIZE - 1] |= SR_MCAST_ADDR_FLAG;
++      if (netdev->flags & IFF_PROMISC) {
++              rx_ctl |= RCR_PRMSC;
++      } else if (netdev->flags & IFF_ALLMULTI ||
++                 netdev_mc_count(netdev) > SR_MCAST_MAX) {
++              rx_ctl |= RCR_RUNT;
++      } else if (!netdev_mc_empty(netdev)) {
++              struct netdev_hw_addr *ha;
++
++              netdev_for_each_mc_addr(ha, netdev) {
++                      u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26;
++                      hashes[crc >> 3] |= 1 << (crc & 0x7);
++              }
++      }
++
++      sr_write_async(dev, MAR, SR_MCAST_SIZE, hashes);
++      sr_write_reg_async(dev, RCR, rx_ctl);
++}
++
++static int sr9700_set_mac_address(struct net_device *netdev, void *p)
++{
++      struct usbnet *dev = netdev_priv(netdev);
++      struct sockaddr *addr = p;
++
++      if (!is_valid_ether_addr(addr->sa_data)) {
++              netdev_err(netdev, "not setting invalid mac address %pM\n",
++                         addr->sa_data);
++              return -EINVAL;
++      }
++
++      memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
++      sr_write_async(dev, PAR, 6, netdev->dev_addr);
++
++      return 0;
++}
++
++static const struct net_device_ops sr9700_netdev_ops = {
++      .ndo_open               = usbnet_open,
++      .ndo_stop               = usbnet_stop,
++      .ndo_start_xmit         = usbnet_start_xmit,
++      .ndo_tx_timeout         = usbnet_tx_timeout,
++      .ndo_change_mtu         = usbnet_change_mtu,
++      .ndo_validate_addr      = eth_validate_addr,
++      .ndo_do_ioctl           = sr9700_ioctl,
++      .ndo_set_rx_mode        = sr9700_set_multicast,
++      .ndo_set_mac_address    = sr9700_set_mac_address,
++};
++
++static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      struct net_device *netdev;
++      struct mii_if_info *mii;
++      int ret;
++
++      ret = usbnet_get_endpoints(dev, intf);
++      if (ret)
++              goto out;
++
++      netdev = dev->net;
++
++      netdev->netdev_ops = &sr9700_netdev_ops;
++      netdev->ethtool_ops = &sr9700_ethtool_ops;
++      netdev->hard_header_len += SR_TX_OVERHEAD;
++      dev->hard_mtu = netdev->mtu + netdev->hard_header_len;
++      /* bulkin buffer is preferably not less than 3K */
++      dev->rx_urb_size = 3072;
++
++      mii = &dev->mii;
++      mii->dev = netdev;
++      mii->mdio_read = sr_mdio_read;
++      mii->mdio_write = sr_mdio_write;
++      mii->phy_id_mask = 0x1f;
++      mii->reg_num_mask = 0x1f;
++
++      sr_write_reg(dev, NCR, NCR_RST);
++      udelay(20);
++
++      /* read MAC
++       * After Chip Power on, the Chip will reload the MAC from
++       * EEPROM automatically to PAR. In case there is no EEPROM externally,
++       * a default MAC address is stored in PAR for making chip work properly.
++       */
++      if (sr_read(dev, PAR, ETH_ALEN, netdev->dev_addr) < 0) {
++              netdev_err(netdev, "Error reading MAC address\n");
++              ret = -ENODEV;
++              goto out;
++      }
++
++      /* power up and reset phy */
++      sr_write_reg(dev, PRR, PRR_PHY_RST);
++      /* at least 10ms, here 20ms for safe */
++      mdelay(20);
++      sr_write_reg(dev, PRR, 0);
++      /* at least 1ms, here 2ms for reading right register */
++      udelay(2 * 1000);
++
++      /* receive broadcast packets */
++      sr9700_set_multicast(netdev);
++
++      sr_mdio_write(netdev, mii->phy_id, MII_BMCR, BMCR_RESET);
++      sr_mdio_write(netdev, mii->phy_id, MII_ADVERTISE, ADVERTISE_ALL |
++                    ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
++      mii_nway_restart(mii);
++
++out:
++      return ret;
++}
++
++static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
++{
++      struct sk_buff *sr_skb;
++      int len;
++
++      /* skb content (packets) format :
++       *                    p0            p1            p2    ......    pm
++       *                 /      \
++       *            /                \
++       *        /                            \
++       *  /                                        \
++       * p0b0 p0b1 p0b2 p0b3 ...... p0b(n-4) p0b(n-3)...p0bn
++       *
++       * p0 : packet 0
++       * p0b0 : packet 0 byte 0
++       *
++       * b0: rx status
++       * b1: packet length (incl crc) low
++       * b2: packet length (incl crc) high
++       * b3..n-4: packet data
++       * bn-3..bn: ethernet packet crc
++       */
++      if (unlikely(skb->len < SR_RX_OVERHEAD)) {
++              netdev_err(dev->net, "unexpected tiny rx frame\n");
++              return 0;
++      }
++
++      /* one skb may contains multiple packets */
++      while (skb->len > SR_RX_OVERHEAD) {
++              if (skb->data[0] != 0x40)
++                      return 0;
++
++              /* ignore the CRC length */
++              len = (skb->data[1] | (skb->data[2] << 8)) - 4;
++
++              if (len > ETH_FRAME_LEN)
++                      return 0;
++
++              /* the last packet of current skb */
++              if (skb->len == (len + SR_RX_OVERHEAD)) {
++                      skb_pull(skb, 3);
++                      skb->len = len;
++                      skb_set_tail_pointer(skb, len);
++                      skb->truesize = len + sizeof(struct sk_buff);
++                      return 2;
++              }
++
++              /* skb_clone is used for address align */
++              sr_skb = skb_clone(skb, GFP_ATOMIC);
++              if (!sr_skb)
++                      return 0;
++
++              sr_skb->len = len;
++              sr_skb->data = skb->data + 3;
++              skb_set_tail_pointer(sr_skb, len);
++              sr_skb->truesize = len + sizeof(struct sk_buff);
++              usbnet_skb_return(dev, sr_skb);
++
++              skb_pull(skb, len + SR_RX_OVERHEAD);
++      };
++
++      return 0;
++}
++
++static struct sk_buff *sr9700_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
++                                     gfp_t flags)
++{
++      int len;
++
++      /* SR9700 can only send out one ethernet packet at once.
++       *
++       * b0 b1 b2 b3 ...... b(n-4) b(n-3)...bn
++       *
++       * b0: rx status
++       * b1: packet length (incl crc) low
++       * b2: packet length (incl crc) high
++       * b3..n-4: packet data
++       * bn-3..bn: ethernet packet crc
++       */
++
++      len = skb->len;
++
++      if (skb_headroom(skb) < SR_TX_OVERHEAD) {
++              struct sk_buff *skb2;
++
++              skb2 = skb_copy_expand(skb, SR_TX_OVERHEAD, 0, flags);
++              dev_kfree_skb_any(skb);
++              skb = skb2;
++              if (!skb)
++                      return NULL;
++      }
++
++      __skb_push(skb, SR_TX_OVERHEAD);
++
++      /* usbnet adds padding if length is a multiple of packet size
++       * if so, adjust length value in header
++       */
++      if ((skb->len % dev->maxpacket) == 0)
++              len++;
++
++      skb->data[0] = len;
++      skb->data[1] = len >> 8;
++
++      return skb;
++}
++
++static void sr9700_status(struct usbnet *dev, struct urb *urb)
++{
++      int link;
++      u8 *buf;
++
++      /* format:
++         b0: net status
++         b1: tx status 1
++         b2: tx status 2
++         b3: rx status
++         b4: rx overflow
++         b5: rx count
++         b6: tx count
++         b7: gpr
++      */
++
++      if (urb->actual_length < 8)
++              return;
++
++      buf = urb->transfer_buffer;
++
++      link = !!(buf[0] & 0x40);
++      if (netif_carrier_ok(dev->net) != link) {
++              usbnet_link_change(dev, link, 1);
++              netdev_dbg(dev->net, "Link Status is: %d\n", link);
++      }
++}
++
++static int sr9700_link_reset(struct usbnet *dev)
++{
++      struct ethtool_cmd ecmd;
++
++      mii_check_media(&dev->mii, 1, 1);
++      mii_ethtool_gset(&dev->mii, &ecmd);
++
++      netdev_dbg(dev->net, "link_reset() speed: %d duplex: %d\n",
++                 ecmd.speed, ecmd.duplex);
++
++      return 0;
++}
++
++static const struct driver_info sr9700_driver_info = {
++      .description    = "CoreChip SR9700 USB Ethernet",
++      .flags          = FLAG_ETHER,
++      .bind           = sr9700_bind,
++      .rx_fixup       = sr9700_rx_fixup,
++      .tx_fixup       = sr9700_tx_fixup,
++      .status         = sr9700_status,
++      .link_reset     = sr9700_link_reset,
++      .reset          = sr9700_link_reset,
++};
++
++static const struct usb_device_id products[] = {
++      {
++              USB_DEVICE(0x0fe6, 0x9700),     /* SR9700 device */
++              .driver_info = (unsigned long)&sr9700_driver_info,
++      },
++      {},                     /* END */
++};
++
++MODULE_DEVICE_TABLE(usb, products);
++
++static struct usb_driver sr9700_usb_driver = {
++      .name           = "sr9700",
++      .id_table       = products,
++      .probe          = usbnet_probe,
++      .disconnect     = usbnet_disconnect,
++      .suspend        = usbnet_suspend,
++      .resume         = usbnet_resume,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(sr9700_usb_driver);
++
++MODULE_AUTHOR("liujl <liujunliang_ljl@163.com>");
++MODULE_DESCRIPTION("SR9700 one chip USB 1.1 USB to Ethernet device from http://www.corechip-sz.com/");
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/sr9700.h backports-3.18.1-1/drivers/net/usb/sr9700.h
+--- backports-3.18.1-1.org/drivers/net/usb/sr9700.h    1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/sr9700.h        2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,173 @@
++/*
++ * CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices
++ *
++ * Author : Liu Junliang <liujunliang_ljl@163.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ */
++
++#ifndef _SR9700_H
++#define       _SR9700_H
++
++/* sr9700 spec. register table on Linux platform */
++
++/* Network Control Reg */
++#define       NCR                     0x00
++#define               NCR_RST                 (1 << 0)
++#define               NCR_LBK                 (3 << 1)
++#define               NCR_FDX                 (1 << 3)
++#define               NCR_WAKEEN              (1 << 6)
++/* Network Status Reg */
++#define       NSR                     0x01
++#define               NSR_RXRDY               (1 << 0)
++#define               NSR_RXOV                (1 << 1)
++#define               NSR_TX1END              (1 << 2)
++#define               NSR_TX2END              (1 << 3)
++#define               NSR_TXFULL              (1 << 4)
++#define               NSR_WAKEST              (1 << 5)
++#define               NSR_LINKST              (1 << 6)
++#define               NSR_SPEED               (1 << 7)
++/* Tx Control Reg */
++#define       TCR                     0x02
++#define               TCR_CRC_DIS             (1 << 1)
++#define               TCR_PAD_DIS             (1 << 2)
++#define               TCR_LC_CARE             (1 << 3)
++#define               TCR_CRS_CARE    (1 << 4)
++#define               TCR_EXCECM              (1 << 5)
++#define               TCR_LF_EN               (1 << 6)
++/* Tx Status Reg for Packet Index 1 */
++#define       TSR1            0x03
++#define               TSR1_EC                 (1 << 2)
++#define               TSR1_COL                (1 << 3)
++#define               TSR1_LC                 (1 << 4)
++#define               TSR1_NC                 (1 << 5)
++#define               TSR1_LOC                (1 << 6)
++#define               TSR1_TLF                (1 << 7)
++/* Tx Status Reg for Packet Index 2 */
++#define       TSR2            0x04
++#define               TSR2_EC                 (1 << 2)
++#define               TSR2_COL                (1 << 3)
++#define               TSR2_LC                 (1 << 4)
++#define               TSR2_NC                 (1 << 5)
++#define               TSR2_LOC                (1 << 6)
++#define               TSR2_TLF                (1 << 7)
++/* Rx Control Reg*/
++#define       RCR                     0x05
++#define               RCR_RXEN                (1 << 0)
++#define               RCR_PRMSC               (1 << 1)
++#define               RCR_RUNT                (1 << 2)
++#define               RCR_ALL                 (1 << 3)
++#define               RCR_DIS_CRC             (1 << 4)
++#define               RCR_DIS_LONG    (1 << 5)
++/* Rx Status Reg */
++#define       RSR                     0x06
++#define               RSR_AE                  (1 << 2)
++#define               RSR_MF                  (1 << 6)
++#define               RSR_RF                  (1 << 7)
++/* Rx Overflow Counter Reg */
++#define       ROCR            0x07
++#define               ROCR_ROC                (0x7F << 0)
++#define               ROCR_RXFU               (1 << 7)
++/* Back Pressure Threshold Reg */
++#define       BPTR            0x08
++#define               BPTR_JPT                (0x0F << 0)
++#define               BPTR_BPHW               (0x0F << 4)
++/* Flow Control Threshold Reg */
++#define       FCTR            0x09
++#define               FCTR_LWOT               (0x0F << 0)
++#define               FCTR_HWOT               (0x0F << 4)
++/* rx/tx Flow Control Reg */
++#define       FCR                     0x0A
++#define               FCR_FLCE                (1 << 0)
++#define               FCR_BKPA                (1 << 4)
++#define               FCR_TXPEN               (1 << 5)
++#define               FCR_TXPF                (1 << 6)
++#define               FCR_TXP0                (1 << 7)
++/* Eeprom & Phy Control Reg */
++#define       EPCR            0x0B
++#define               EPCR_ERRE               (1 << 0)
++#define               EPCR_ERPRW              (1 << 1)
++#define               EPCR_ERPRR              (1 << 2)
++#define               EPCR_EPOS               (1 << 3)
++#define               EPCR_WEP                (1 << 4)
++/* Eeprom & Phy Address Reg */
++#define       EPAR            0x0C
++#define               EPAR_EROA               (0x3F << 0)
++#define               EPAR_PHY_ADR_MASK       (0x03 << 6)
++#define               EPAR_PHY_ADR            (0x01 << 6)
++/* Eeprom &   Phy Data Reg */
++#define       EPDR            0x0D    /* 0x0D ~ 0x0E for Data Reg Low & High */
++/* Wakeup Control Reg */
++#define       WCR                     0x0F
++#define               WCR_MAGICST             (1 << 0)
++#define               WCR_LINKST              (1 << 2)
++#define               WCR_MAGICEN             (1 << 3)
++#define               WCR_LINKEN              (1 << 5)
++/* Physical Address Reg */
++#define       PAR                     0x10    /* 0x10 ~ 0x15 6 bytes for PAR */
++/* Multicast Address Reg */
++#define       MAR                     0x16    /* 0x16 ~ 0x1D 8 bytes for MAR */
++/* 0x1e unused */
++/* Phy Reset Reg */
++#define       PRR                     0x1F
++#define               PRR_PHY_RST             (1 << 0)
++/* Tx sdram Write Pointer Address Low */
++#define       TWPAL           0x20
++/* Tx sdram Write Pointer Address High */
++#define       TWPAH           0x21
++/* Tx sdram Read Pointer Address Low */
++#define       TRPAL           0x22
++/* Tx sdram Read Pointer Address High */
++#define       TRPAH           0x23
++/* Rx sdram Write Pointer Address Low */
++#define       RWPAL           0x24
++/* Rx sdram Write Pointer Address High */
++#define       RWPAH           0x25
++/* Rx sdram Read Pointer Address Low */
++#define       RRPAL           0x26
++/* Rx sdram Read Pointer Address High */
++#define       RRPAH           0x27
++/* Vendor ID register */
++#define       VID                     0x28    /* 0x28 ~ 0x29 2 bytes for VID */
++/* Product ID register */
++#define       PID                     0x2A    /* 0x2A ~ 0x2B 2 bytes for PID */
++/* CHIP Revision register */
++#define       CHIPR           0x2C
++/* 0x2D --> 0xEF unused */
++/* USB Device Address */
++#define       USBDA           0xF0
++#define               USBDA_USBFA             (0x7F << 0)
++/* RX packet Counter Reg */
++#define       RXC                     0xF1
++/* Tx packet Counter & USB Status Reg */
++#define       TXC_USBS        0xF2
++#define               TXC_USBS_TXC0           (1 << 0)
++#define               TXC_USBS_TXC1           (1 << 1)
++#define               TXC_USBS_TXC2           (1 << 2)
++#define               TXC_USBS_EP1RDY         (1 << 5)
++#define               TXC_USBS_SUSFLAG        (1 << 6)
++#define               TXC_USBS_RXFAULT        (1 << 7)
++/* USB Control register */
++#define       USBC            0xF4
++#define               USBC_EP3NAK             (1 << 4)
++#define               USBC_EP3ACK             (1 << 5)
++
++/* Register access commands and flags */
++#define       SR_RD_REGS              0x00
++#define       SR_WR_REGS              0x01
++#define       SR_WR_REG               0x03
++#define       SR_REQ_RD_REG   (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
++#define       SR_REQ_WR_REG   (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
++
++/* parameters */
++#define       SR_SHARE_TIMEOUT        1000
++#define       SR_EEPROM_LEN           256
++#define       SR_MCAST_SIZE           8
++#define       SR_MCAST_ADDR_FLAG      0x80
++#define       SR_MCAST_MAX            64
++#define       SR_TX_OVERHEAD          2       /* 2bytes header */
++#define       SR_RX_OVERHEAD          7       /* 3bytes header + 4crc tail */
++
++#endif        /* _SR9700_H */
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/sr9800.c backports-3.18.1-1/drivers/net/usb/sr9800.c
+--- backports-3.18.1-1.org/drivers/net/usb/sr9800.c    1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/sr9800.c        2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,874 @@
++/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices
++ *
++ * Author : Liu Junliang <liujunliang_ljl@163.com>
++ *
++ * Based on asix_common.c, asix_devices.c
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2.  This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.*
++ */
++
++#include <linux/module.h>
++#include <linux/kmod.h>
++#include <linux/init.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/workqueue.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/crc32.h>
++#include <linux/usb/usbnet.h>
++#include <linux/slab.h>
++#include <linux/if_vlan.h>
++
++#include "sr9800.h"
++
++static int sr_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
++                          u16 size, void *data)
++{
++      int err;
++
++      err = usbnet_read_cmd(dev, cmd, SR_REQ_RD_REG, value, index,
++                            data, size);
++      if ((err != size) && (err >= 0))
++              err = -EINVAL;
++
++      return err;
++}
++
++static int sr_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
++                           u16 size, void *data)
++{
++      int err;
++
++      err = usbnet_write_cmd(dev, cmd, SR_REQ_WR_REG, value, index,
++                            data, size);
++      if ((err != size) && (err >= 0))
++              err = -EINVAL;
++
++      return err;
++}
++
++static void
++sr_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
++                 u16 size, void *data)
++{
++      usbnet_write_cmd_async(dev, cmd, SR_REQ_WR_REG, value, index, data,
++                             size);
++}
++
++static int sr_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
++{
++      int offset = 0;
++
++      /* This check is no longer done by usbnet */
++      if (skb->len < dev->net->hard_header_len)
++              return 0;
++
++      while (offset + sizeof(u32) < skb->len) {
++              struct sk_buff *sr_skb;
++              u16 size;
++              u32 header = get_unaligned_le32(skb->data + offset);
++
++              offset += sizeof(u32);
++              /* get the packet length */
++              size = (u16) (header & 0x7ff);
++              if (size != ((~header >> 16) & 0x07ff)) {
++                      netdev_err(dev->net, "%s : Bad Header Length\n",
++                                 __func__);
++                      return 0;
++              }
++
++              if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) ||
++                  (size + offset > skb->len)) {
++                      netdev_err(dev->net, "%s : Bad RX Length %d\n",
++                                 __func__, size);
++                      return 0;
++              }
++              sr_skb = netdev_alloc_skb_ip_align(dev->net, size);
++              if (!sr_skb)
++                      return 0;
++
++              skb_put(sr_skb, size);
++              memcpy(sr_skb->data, skb->data + offset, size);
++              usbnet_skb_return(dev, sr_skb);
++
++              offset += (size + 1) & 0xfffe;
++      }
++
++      if (skb->len != offset) {
++              netdev_err(dev->net, "%s : Bad SKB Length %d\n", __func__,
++                         skb->len);
++              return 0;
++      }
++
++      return 1;
++}
++
++static struct sk_buff *sr_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
++                                      gfp_t flags)
++{
++      int headroom = skb_headroom(skb);
++      int tailroom = skb_tailroom(skb);
++      u32 padbytes = 0xffff0000;
++      u32 packet_len;
++      int padlen;
++
++      padlen = ((skb->len + 4) % (dev->maxpacket - 1)) ? 0 : 4;
++
++      if ((!skb_cloned(skb)) && ((headroom + tailroom) >= (4 + padlen))) {
++              if ((headroom < 4) || (tailroom < padlen)) {
++                      skb->data = memmove(skb->head + 4, skb->data,
++                                          skb->len);
++                      skb_set_tail_pointer(skb, skb->len);
++              }
++      } else {
++              struct sk_buff *skb2;
++              skb2 = skb_copy_expand(skb, 4, padlen, flags);
++              dev_kfree_skb_any(skb);
++              skb = skb2;
++              if (!skb)
++                      return NULL;
++      }
++
++      skb_push(skb, 4);
++      packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
++      cpu_to_le32s(&packet_len);
++      skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len));
++
++      if (padlen) {
++              cpu_to_le32s(&padbytes);
++              memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes));
++              skb_put(skb, sizeof(padbytes));
++      }
++
++      return skb;
++}
++
++static void sr_status(struct usbnet *dev, struct urb *urb)
++{
++      struct sr9800_int_data *event;
++      int link;
++
++      if (urb->actual_length < 8)
++              return;
++
++      event = urb->transfer_buffer;
++      link = event->link & 0x01;
++      if (netif_carrier_ok(dev->net) != link) {
++              usbnet_link_change(dev, link, 1);
++              netdev_dbg(dev->net, "Link Status is: %d\n", link);
++      }
++
++      return;
++}
++
++static inline int sr_set_sw_mii(struct usbnet *dev)
++{
++      int ret;
++
++      ret = sr_write_cmd(dev, SR_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
++      if (ret < 0)
++              netdev_err(dev->net, "Failed to enable software MII access\n");
++      return ret;
++}
++
++static inline int sr_set_hw_mii(struct usbnet *dev)
++{
++      int ret;
++
++      ret = sr_write_cmd(dev, SR_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
++      if (ret < 0)
++              netdev_err(dev->net, "Failed to enable hardware MII access\n");
++      return ret;
++}
++
++static inline int sr_get_phy_addr(struct usbnet *dev)
++{
++      u8 buf[2];
++      int ret;
++
++      ret = sr_read_cmd(dev, SR_CMD_READ_PHY_ID, 0, 0, 2, buf);
++      if (ret < 0) {
++              netdev_err(dev->net, "%s : Error reading PHYID register:%02x\n",
++                         __func__, ret);
++              goto out;
++      }
++      netdev_dbg(dev->net, "%s : returning 0x%04x\n", __func__,
++                 *((__le16 *)buf));
++
++      ret = buf[1];
++
++out:
++      return ret;
++}
++
++static int sr_sw_reset(struct usbnet *dev, u8 flags)
++{
++      int ret;
++
++      ret = sr_write_cmd(dev, SR_CMD_SW_RESET, flags, 0, 0, NULL);
++      if (ret < 0)
++              netdev_err(dev->net, "Failed to send software reset:%02x\n",
++                         ret);
++
++      return ret;
++}
++
++static u16 sr_read_rx_ctl(struct usbnet *dev)
++{
++      __le16 v;
++      int ret;
++
++      ret = sr_read_cmd(dev, SR_CMD_READ_RX_CTL, 0, 0, 2, &v);
++      if (ret < 0) {
++              netdev_err(dev->net, "Error reading RX_CTL register:%02x\n",
++                         ret);
++              goto out;
++      }
++
++      ret = le16_to_cpu(v);
++out:
++      return ret;
++}
++
++static int sr_write_rx_ctl(struct usbnet *dev, u16 mode)
++{
++      int ret;
++
++      netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode);
++      ret = sr_write_cmd(dev, SR_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
++      if (ret < 0)
++              netdev_err(dev->net,
++                         "Failed to write RX_CTL mode to 0x%04x:%02x\n",
++                         mode, ret);
++
++      return ret;
++}
++
++static u16 sr_read_medium_status(struct usbnet *dev)
++{
++      __le16 v;
++      int ret;
++
++      ret = sr_read_cmd(dev, SR_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
++      if (ret < 0) {
++              netdev_err(dev->net,
++                         "Error reading Medium Status register:%02x\n", ret);
++              return ret;     /* TODO: callers not checking for error ret */
++      }
++
++      return le16_to_cpu(v);
++}
++
++static int sr_write_medium_mode(struct usbnet *dev, u16 mode)
++{
++      int ret;
++
++      netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode);
++      ret = sr_write_cmd(dev, SR_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
++      if (ret < 0)
++              netdev_err(dev->net,
++                         "Failed to write Medium Mode mode to 0x%04x:%02x\n",
++                         mode, ret);
++      return ret;
++}
++
++static int sr_write_gpio(struct usbnet *dev, u16 value, int sleep)
++{
++      int ret;
++
++      netdev_dbg(dev->net, "%s : value = 0x%04x\n", __func__, value);
++      ret = sr_write_cmd(dev, SR_CMD_WRITE_GPIOS, value, 0, 0, NULL);
++      if (ret < 0)
++              netdev_err(dev->net, "Failed to write GPIO value 0x%04x:%02x\n",
++                         value, ret);
++      if (sleep)
++              msleep(sleep);
++
++      return ret;
++}
++
++/* SR9800 have a 16-bit RX_CTL value */
++static void sr_set_multicast(struct net_device *net)
++{
++      struct usbnet *dev = netdev_priv(net);
++      struct sr_data *data = (struct sr_data *)&dev->data;
++      u16 rx_ctl = SR_DEFAULT_RX_CTL;
++
++      if (net->flags & IFF_PROMISC) {
++              rx_ctl |= SR_RX_CTL_PRO;
++      } else if (net->flags & IFF_ALLMULTI ||
++                 netdev_mc_count(net) > SR_MAX_MCAST) {
++              rx_ctl |= SR_RX_CTL_AMALL;
++      } else if (netdev_mc_empty(net)) {
++              /* just broadcast and directed */
++      } else {
++              /* We use the 20 byte dev->data
++               * for our 8 byte filter buffer
++               * to avoid allocating memory that
++               * is tricky to free later
++               */
++              struct netdev_hw_addr *ha;
++              u32 crc_bits;
++
++              memset(data->multi_filter, 0, SR_MCAST_FILTER_SIZE);
++
++              /* Build the multicast hash filter. */
++              netdev_for_each_mc_addr(ha, net) {
++                      crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
++                      data->multi_filter[crc_bits >> 3] |=
++                          1 << (crc_bits & 7);
++              }
++
++              sr_write_cmd_async(dev, SR_CMD_WRITE_MULTI_FILTER, 0, 0,
++                                 SR_MCAST_FILTER_SIZE, data->multi_filter);
++
++              rx_ctl |= SR_RX_CTL_AM;
++      }
++
++      sr_write_cmd_async(dev, SR_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
++}
++
++static int sr_mdio_read(struct net_device *net, int phy_id, int loc)
++{
++      struct usbnet *dev = netdev_priv(net);
++      __le16 res;
++
++      mutex_lock(&dev->phy_mutex);
++      sr_set_sw_mii(dev);
++      sr_read_cmd(dev, SR_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, &res);
++      sr_set_hw_mii(dev);
++      mutex_unlock(&dev->phy_mutex);
++
++      netdev_dbg(dev->net,
++                 "%s : phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", __func__,
++                 phy_id, loc, le16_to_cpu(res));
++
++      return le16_to_cpu(res);
++}
++
++static void
++sr_mdio_write(struct net_device *net, int phy_id, int loc, int val)
++{
++      struct usbnet *dev = netdev_priv(net);
++      __le16 res = cpu_to_le16(val);
++
++      netdev_dbg(dev->net,
++                 "%s : phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", __func__,
++                 phy_id, loc, val);
++      mutex_lock(&dev->phy_mutex);
++      sr_set_sw_mii(dev);
++      sr_write_cmd(dev, SR_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
++      sr_set_hw_mii(dev);
++      mutex_unlock(&dev->phy_mutex);
++}
++
++/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
++static u32 sr_get_phyid(struct usbnet *dev)
++{
++      int phy_reg;
++      u32 phy_id;
++      int i;
++
++      /* Poll for the rare case the FW or phy isn't ready yet.  */
++      for (i = 0; i < 100; i++) {
++              phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
++              if (phy_reg != 0 && phy_reg != 0xFFFF)
++                      break;
++              mdelay(1);
++      }
++
++      if (phy_reg <= 0 || phy_reg == 0xFFFF)
++              return 0;
++
++      phy_id = (phy_reg & 0xffff) << 16;
++
++      phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
++      if (phy_reg < 0)
++              return 0;
++
++      phy_id |= (phy_reg & 0xffff);
++
++      return phy_id;
++}
++
++static void
++sr_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
++{
++      struct usbnet *dev = netdev_priv(net);
++      u8 opt;
++
++      if (sr_read_cmd(dev, SR_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
++              wolinfo->supported = 0;
++              wolinfo->wolopts = 0;
++              return;
++      }
++      wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
++      wolinfo->wolopts = 0;
++      if (opt & SR_MONITOR_LINK)
++              wolinfo->wolopts |= WAKE_PHY;
++      if (opt & SR_MONITOR_MAGIC)
++              wolinfo->wolopts |= WAKE_MAGIC;
++}
++
++static int
++sr_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
++{
++      struct usbnet *dev = netdev_priv(net);
++      u8 opt = 0;
++
++      if (wolinfo->wolopts & WAKE_PHY)
++              opt |= SR_MONITOR_LINK;
++      if (wolinfo->wolopts & WAKE_MAGIC)
++              opt |= SR_MONITOR_MAGIC;
++
++      if (sr_write_cmd(dev, SR_CMD_WRITE_MONITOR_MODE,
++                       opt, 0, 0, NULL) < 0)
++              return -EINVAL;
++
++      return 0;
++}
++
++static int sr_get_eeprom_len(struct net_device *net)
++{
++      struct usbnet *dev = netdev_priv(net);
++      struct sr_data *data = (struct sr_data *)&dev->data;
++
++      return data->eeprom_len;
++}
++
++static int sr_get_eeprom(struct net_device *net,
++                            struct ethtool_eeprom *eeprom, u8 *data)
++{
++      struct usbnet *dev = netdev_priv(net);
++      __le16 *ebuf = (__le16 *)data;
++      int ret;
++      int i;
++
++      /* Crude hack to ensure that we don't overwrite memory
++       * if an odd length is supplied
++       */
++      if (eeprom->len % 2)
++              return -EINVAL;
++
++      eeprom->magic = SR_EEPROM_MAGIC;
++
++      /* sr9800 returns 2 bytes from eeprom on read */
++      for (i = 0; i < eeprom->len / 2; i++) {
++              ret = sr_read_cmd(dev, SR_CMD_READ_EEPROM, eeprom->offset + i,
++                                0, 2, &ebuf[i]);
++              if (ret < 0)
++                      return -EINVAL;
++      }
++      return 0;
++}
++
++static void sr_get_drvinfo(struct net_device *net,
++                               struct ethtool_drvinfo *info)
++{
++      struct usbnet *dev = netdev_priv(net);
++      struct sr_data *data = (struct sr_data *)&dev->data;
++
++      /* Inherit standard device info */
++      usbnet_get_drvinfo(net, info);
++      strncpy(info->driver, DRIVER_NAME, sizeof(info->driver));
++      strncpy(info->version, DRIVER_VERSION, sizeof(info->version));
++      info->eedump_len = data->eeprom_len;
++}
++
++static u32 sr_get_link(struct net_device *net)
++{
++      struct usbnet *dev = netdev_priv(net);
++
++      return mii_link_ok(&dev->mii);
++}
++
++static int sr_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
++{
++      struct usbnet *dev = netdev_priv(net);
++
++      return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
++}
++
++static int sr_set_mac_address(struct net_device *net, void *p)
++{
++      struct usbnet *dev = netdev_priv(net);
++      struct sr_data *data = (struct sr_data *)&dev->data;
++      struct sockaddr *addr = p;
++
++      if (netif_running(net))
++              return -EBUSY;
++      if (!is_valid_ether_addr(addr->sa_data))
++              return -EADDRNOTAVAIL;
++
++      memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
++
++      /* We use the 20 byte dev->data
++       * for our 6 byte mac buffer
++       * to avoid allocating memory that
++       * is tricky to free later
++       */
++      memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
++      sr_write_cmd_async(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
++                         data->mac_addr);
++
++      return 0;
++}
++
++static const struct ethtool_ops sr9800_ethtool_ops = {
++      .get_drvinfo    = sr_get_drvinfo,
++      .get_link       = sr_get_link,
++      .get_msglevel   = usbnet_get_msglevel,
++      .set_msglevel   = usbnet_set_msglevel,
++      .get_wol        = sr_get_wol,
++      .set_wol        = sr_set_wol,
++      .get_eeprom_len = sr_get_eeprom_len,
++      .get_eeprom     = sr_get_eeprom,
++      .get_settings   = usbnet_get_settings,
++      .set_settings   = usbnet_set_settings,
++      .nway_reset     = usbnet_nway_reset,
++};
++
++static int sr9800_link_reset(struct usbnet *dev)
++{
++      struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
++      u16 mode;
++
++      mii_check_media(&dev->mii, 1, 1);
++      mii_ethtool_gset(&dev->mii, &ecmd);
++      mode = SR9800_MEDIUM_DEFAULT;
++
++      if (ethtool_cmd_speed(&ecmd) != SPEED_100)
++              mode &= ~SR_MEDIUM_PS;
++
++      if (ecmd.duplex != DUPLEX_FULL)
++              mode &= ~SR_MEDIUM_FD;
++
++      netdev_dbg(dev->net, "%s : speed: %u duplex: %d mode: 0x%04x\n",
++                 __func__, ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
++
++      sr_write_medium_mode(dev, mode);
++
++      return 0;
++}
++
++
++static int sr9800_set_default_mode(struct usbnet *dev)
++{
++      u16 rx_ctl;
++      int ret;
++
++      sr_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
++      sr_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
++                    ADVERTISE_ALL | ADVERTISE_CSMA);
++      mii_nway_restart(&dev->mii);
++
++      ret = sr_write_medium_mode(dev, SR9800_MEDIUM_DEFAULT);
++      if (ret < 0)
++              goto out;
++
++      ret = sr_write_cmd(dev, SR_CMD_WRITE_IPG012,
++                              SR9800_IPG0_DEFAULT | SR9800_IPG1_DEFAULT,
++                              SR9800_IPG2_DEFAULT, 0, NULL);
++      if (ret < 0) {
++              netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
++              goto out;
++      }
++
++      /* Set RX_CTL to default values with 2k buffer, and enable cactus */
++      ret = sr_write_rx_ctl(dev, SR_DEFAULT_RX_CTL);
++      if (ret < 0)
++              goto out;
++
++      rx_ctl = sr_read_rx_ctl(dev);
++      netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
++                 rx_ctl);
++
++      rx_ctl = sr_read_medium_status(dev);
++      netdev_dbg(dev->net, "Medium Status:0x%04x after all initializations\n",
++                 rx_ctl);
++
++      return 0;
++out:
++      return ret;
++}
++
++static int sr9800_reset(struct usbnet *dev)
++{
++      struct sr_data *data = (struct sr_data *)&dev->data;
++      int ret, embd_phy;
++      u16 rx_ctl;
++
++      ret = sr_write_gpio(dev,
++                      SR_GPIO_RSE | SR_GPIO_GPO_2 | SR_GPIO_GPO2EN, 5);
++      if (ret < 0)
++              goto out;
++
++      embd_phy = ((sr_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
++
++      ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
++      if (ret < 0) {
++              netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
++              goto out;
++      }
++
++      ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_PRL);
++      if (ret < 0)
++              goto out;
++
++      msleep(150);
++
++      ret = sr_sw_reset(dev, SR_SWRESET_CLEAR);
++      if (ret < 0)
++              goto out;
++
++      msleep(150);
++
++      if (embd_phy) {
++              ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
++              if (ret < 0)
++                      goto out;
++      } else {
++              ret = sr_sw_reset(dev, SR_SWRESET_PRTE);
++              if (ret < 0)
++                      goto out;
++      }
++
++      msleep(150);
++      rx_ctl = sr_read_rx_ctl(dev);
++      netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
++      ret = sr_write_rx_ctl(dev, 0x0000);
++      if (ret < 0)
++              goto out;
++
++      rx_ctl = sr_read_rx_ctl(dev);
++      netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
++
++      ret = sr_sw_reset(dev, SR_SWRESET_PRL);
++      if (ret < 0)
++              goto out;
++
++      msleep(150);
++
++      ret = sr_sw_reset(dev, SR_SWRESET_IPRL | SR_SWRESET_PRL);
++      if (ret < 0)
++              goto out;
++
++      msleep(150);
++
++      ret = sr9800_set_default_mode(dev);
++      if (ret < 0)
++              goto out;
++
++      /* Rewrite MAC address */
++      memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
++      ret = sr_write_cmd(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
++                                                      data->mac_addr);
++      if (ret < 0)
++              goto out;
++
++      return 0;
++
++out:
++      return ret;
++}
++
++static const struct net_device_ops sr9800_netdev_ops = {
++      .ndo_open               = usbnet_open,
++      .ndo_stop               = usbnet_stop,
++      .ndo_start_xmit         = usbnet_start_xmit,
++      .ndo_tx_timeout         = usbnet_tx_timeout,
++      .ndo_change_mtu         = usbnet_change_mtu,
++      .ndo_set_mac_address    = sr_set_mac_address,
++      .ndo_validate_addr      = eth_validate_addr,
++      .ndo_do_ioctl           = sr_ioctl,
++      .ndo_set_rx_mode        = sr_set_multicast,
++};
++
++static int sr9800_phy_powerup(struct usbnet *dev)
++{
++      int ret;
++
++      /* set the embedded Ethernet PHY in power-down state */
++      ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_IPRL);
++      if (ret < 0) {
++              netdev_err(dev->net, "Failed to power down PHY : %d\n", ret);
++              return ret;
++      }
++      msleep(20);
++
++      /* set the embedded Ethernet PHY in power-up state */
++      ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
++      if (ret < 0) {
++              netdev_err(dev->net, "Failed to reset PHY: %d\n", ret);
++              return ret;
++      }
++      msleep(600);
++
++      /* set the embedded Ethernet PHY in reset state */
++      ret = sr_sw_reset(dev, SR_SWRESET_CLEAR);
++      if (ret < 0) {
++              netdev_err(dev->net, "Failed to power up PHY: %d\n", ret);
++              return ret;
++      }
++      msleep(20);
++
++      /* set the embedded Ethernet PHY in power-up state */
++      ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
++      if (ret < 0) {
++              netdev_err(dev->net, "Failed to reset PHY: %d\n", ret);
++              return ret;
++      }
++
++      return 0;
++}
++
++static int sr9800_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      struct sr_data *data = (struct sr_data *)&dev->data;
++      u16 led01_mux, led23_mux;
++      int ret, embd_phy;
++      u32 phyid;
++      u16 rx_ctl;
++
++      data->eeprom_len = SR9800_EEPROM_LEN;
++
++      usbnet_get_endpoints(dev, intf);
++
++      /* LED Setting Rule :
++       * AABB:CCDD
++       * AA : MFA0(LED0)
++       * BB : MFA1(LED1)
++       * CC : MFA2(LED2), Reserved for SR9800
++       * DD : MFA3(LED3), Reserved for SR9800
++       */
++      led01_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_LINK;
++      led23_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_TX_ACTIVE;
++      ret = sr_write_cmd(dev, SR_CMD_LED_MUX, led01_mux, led23_mux, 0, NULL);
++      if (ret < 0) {
++                      netdev_err(dev->net, "set LINK LED failed : %d\n", ret);
++                      goto out;
++      }
++
++      /* Get the MAC address */
++      ret = sr_read_cmd(dev, SR_CMD_READ_NODE_ID, 0, 0, ETH_ALEN,
++                        dev->net->dev_addr);
++      if (ret < 0) {
++              netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
++              return ret;
++      }
++      netdev_dbg(dev->net, "mac addr : %pM\n", dev->net->dev_addr);
++
++      /* Initialize MII structure */
++      dev->mii.dev = dev->net;
++      dev->mii.mdio_read = sr_mdio_read;
++      dev->mii.mdio_write = sr_mdio_write;
++      dev->mii.phy_id_mask = 0x1f;
++      dev->mii.reg_num_mask = 0x1f;
++      dev->mii.phy_id = sr_get_phy_addr(dev);
++
++      dev->net->netdev_ops = &sr9800_netdev_ops;
++      dev->net->ethtool_ops = &sr9800_ethtool_ops;
++
++      embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
++      /* Reset the PHY to normal operation mode */
++      ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
++      if (ret < 0) {
++              netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
++              return ret;
++      }
++
++      /* Init PHY routine */
++      ret = sr9800_phy_powerup(dev);
++      if (ret < 0)
++              goto out;
++
++      rx_ctl = sr_read_rx_ctl(dev);
++      netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
++      ret = sr_write_rx_ctl(dev, 0x0000);
++      if (ret < 0)
++              goto out;
++
++      rx_ctl = sr_read_rx_ctl(dev);
++      netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
++
++      /* Read PHYID register *AFTER* the PHY was reset properly */
++      phyid = sr_get_phyid(dev);
++      netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
++
++      /* medium mode setting */
++      ret = sr9800_set_default_mode(dev);
++      if (ret < 0)
++              goto out;
++
++      if (dev->udev->speed == USB_SPEED_HIGH) {
++              ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE,
++                      SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].byte_cnt,
++                      SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].threshold,
++                      0, NULL);
++              if (ret < 0) {
++                      netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret);
++                      goto out;
++              }
++              dev->rx_urb_size =
++                      SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].size;
++      } else {
++              ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE,
++                      SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].byte_cnt,
++                      SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].threshold,
++                      0, NULL);
++              if (ret < 0) {
++                      netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret);
++                      goto out;
++              }
++              dev->rx_urb_size =
++                      SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].size;
++      }
++      netdev_dbg(dev->net, "%s : setting rx_urb_size with : %zu\n", __func__,
++                 dev->rx_urb_size);
++      return 0;
++
++out:
++      return ret;
++}
++
++static const struct driver_info sr9800_driver_info = {
++      .description    = "CoreChip SR9800 USB 2.0 Ethernet",
++      .bind           = sr9800_bind,
++      .status         = sr_status,
++      .link_reset     = sr9800_link_reset,
++      .reset          = sr9800_reset,
++      .flags          = DRIVER_FLAG,
++      .rx_fixup       = sr_rx_fixup,
++      .tx_fixup       = sr_tx_fixup,
++};
++
++static const struct usb_device_id     products[] = {
++      {
++              USB_DEVICE(0x0fe6, 0x9800),     /* SR9800 Device  */
++              .driver_info = (unsigned long) &sr9800_driver_info,
++      },
++      {},             /* END */
++};
++
++MODULE_DEVICE_TABLE(usb, products);
++
++static struct usb_driver sr_driver = {
++      .name           = DRIVER_NAME,
++      .id_table       = products,
++      .probe          = usbnet_probe,
++      .suspend        = usbnet_suspend,
++      .resume         = usbnet_resume,
++      .disconnect     = usbnet_disconnect,
++      .supports_autosuspend = 1,
++};
++
++module_usb_driver(sr_driver);
++
++MODULE_AUTHOR("Liu Junliang <liujunliang_ljl@163.com");
++MODULE_VERSION(DRIVER_VERSION);
++MODULE_DESCRIPTION("SR9800 USB 2.0 USB2NET Dev : http://www.corechip-sz.com");
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/sr9800.h backports-3.18.1-1/drivers/net/usb/sr9800.h
+--- backports-3.18.1-1.org/drivers/net/usb/sr9800.h    1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/sr9800.h        2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,202 @@
++/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices
++ *
++ * Author : Liu Junliang <liujunliang_ljl@163.com>
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2.  This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#ifndef       _SR9800_H
++#define       _SR9800_H
++
++/* SR9800 spec. command table on Linux Platform */
++
++/* command : Software Station Management Control Reg */
++#define SR_CMD_SET_SW_MII             0x06
++/* command : PHY Read Reg */
++#define SR_CMD_READ_MII_REG           0x07
++/* command : PHY Write Reg */
++#define SR_CMD_WRITE_MII_REG          0x08
++/* command : Hardware Station Management Control Reg */
++#define SR_CMD_SET_HW_MII             0x0a
++/* command : SROM Read Reg */
++#define SR_CMD_READ_EEPROM            0x0b
++/* command : SROM Write Reg */
++#define SR_CMD_WRITE_EEPROM           0x0c
++/* command : SROM Write Enable Reg */
++#define SR_CMD_WRITE_ENABLE           0x0d
++/* command : SROM Write Disable Reg */
++#define SR_CMD_WRITE_DISABLE          0x0e
++/* command : RX Control Read Reg */
++#define SR_CMD_READ_RX_CTL            0x0f
++#define               SR_RX_CTL_PRO                   (1 << 0)
++#define               SR_RX_CTL_AMALL                 (1 << 1)
++#define               SR_RX_CTL_SEP                   (1 << 2)
++#define               SR_RX_CTL_AB                    (1 << 3)
++#define               SR_RX_CTL_AM                    (1 << 4)
++#define               SR_RX_CTL_AP                    (1 << 5)
++#define               SR_RX_CTL_ARP                   (1 << 6)
++#define               SR_RX_CTL_SO                    (1 << 7)
++#define               SR_RX_CTL_RH1M                  (1 << 8)
++#define               SR_RX_CTL_RH2M                  (1 << 9)
++#define               SR_RX_CTL_RH3M                  (1 << 10)
++/* command : RX Control Write Reg */
++#define SR_CMD_WRITE_RX_CTL           0x10
++/* command : IPG0/IPG1/IPG2 Control Read Reg */
++#define SR_CMD_READ_IPG012            0x11
++/* command : IPG0/IPG1/IPG2 Control Write Reg */
++#define SR_CMD_WRITE_IPG012           0x12
++/* command : Node ID Read Reg */
++#define SR_CMD_READ_NODE_ID           0x13
++/* command : Node ID Write Reg */
++#define SR_CMD_WRITE_NODE_ID          0x14
++/* command : Multicast Filter Array Read Reg */
++#define       SR_CMD_READ_MULTI_FILTER        0x15
++/* command : Multicast Filter Array Write Reg */
++#define SR_CMD_WRITE_MULTI_FILTER     0x16
++/* command : Eth/HomePNA PHY Address Reg */
++#define SR_CMD_READ_PHY_ID            0x19
++/* command : Medium Status Read Reg */
++#define SR_CMD_READ_MEDIUM_STATUS     0x1a
++#define               SR_MONITOR_LINK                 (1 << 1)
++#define               SR_MONITOR_MAGIC                (1 << 2)
++#define               SR_MONITOR_HSFS                 (1 << 4)
++/* command : Medium Status Write Reg */
++#define SR_CMD_WRITE_MEDIUM_MODE      0x1b
++#define               SR_MEDIUM_GM                    (1 << 0)
++#define               SR_MEDIUM_FD                    (1 << 1)
++#define               SR_MEDIUM_AC                    (1 << 2)
++#define               SR_MEDIUM_ENCK                  (1 << 3)
++#define               SR_MEDIUM_RFC                   (1 << 4)
++#define               SR_MEDIUM_TFC                   (1 << 5)
++#define               SR_MEDIUM_JFE                   (1 << 6)
++#define               SR_MEDIUM_PF                    (1 << 7)
++#define               SR_MEDIUM_RE                    (1 << 8)
++#define               SR_MEDIUM_PS                    (1 << 9)
++#define               SR_MEDIUM_RSV                   (1 << 10)
++#define               SR_MEDIUM_SBP                   (1 << 11)
++#define               SR_MEDIUM_SM                    (1 << 12)
++/* command : Monitor Mode Status Read Reg */
++#define SR_CMD_READ_MONITOR_MODE      0x1c
++/* command : Monitor Mode Status Write Reg */
++#define SR_CMD_WRITE_MONITOR_MODE     0x1d
++/* command : GPIO Status Read Reg */
++#define SR_CMD_READ_GPIOS             0x1e
++#define               SR_GPIO_GPO0EN          (1 << 0) /* GPIO0 Output enable */
++#define               SR_GPIO_GPO_0           (1 << 1) /* GPIO0 Output value */
++#define               SR_GPIO_GPO1EN          (1 << 2) /* GPIO1 Output enable */
++#define               SR_GPIO_GPO_1           (1 << 3) /* GPIO1 Output value */
++#define               SR_GPIO_GPO2EN          (1 << 4) /* GPIO2 Output enable */
++#define               SR_GPIO_GPO_2           (1 << 5) /* GPIO2 Output value */
++#define               SR_GPIO_RESERVED        (1 << 6) /* Reserved */
++#define               SR_GPIO_RSE             (1 << 7) /* Reload serial EEPROM */
++/* command : GPIO Status Write Reg */
++#define SR_CMD_WRITE_GPIOS            0x1f
++/* command : Eth PHY Power and Reset Control Reg */
++#define SR_CMD_SW_RESET                       0x20
++#define               SR_SWRESET_CLEAR                0x00
++#define               SR_SWRESET_RR                   (1 << 0)
++#define               SR_SWRESET_RT                   (1 << 1)
++#define               SR_SWRESET_PRTE                 (1 << 2)
++#define               SR_SWRESET_PRL                  (1 << 3)
++#define               SR_SWRESET_BZ                   (1 << 4)
++#define               SR_SWRESET_IPRL                 (1 << 5)
++#define               SR_SWRESET_IPPD                 (1 << 6)
++/* command : Software Interface Selection Status Read Reg */
++#define SR_CMD_SW_PHY_STATUS          0x21
++/* command : Software Interface Selection Status Write Reg */
++#define SR_CMD_SW_PHY_SELECT          0x22
++/* command : BULK in Buffer Size Reg */
++#define       SR_CMD_BULKIN_SIZE              0x2A
++/* command : LED_MUX Control Reg */
++#define       SR_CMD_LED_MUX                  0x70
++#define               SR_LED_MUX_TX_ACTIVE            (1 << 0)
++#define               SR_LED_MUX_RX_ACTIVE            (1 << 1)
++#define               SR_LED_MUX_COLLISION            (1 << 2)
++#define               SR_LED_MUX_DUP_COL              (1 << 3)
++#define               SR_LED_MUX_DUP                  (1 << 4)
++#define               SR_LED_MUX_SPEED                (1 << 5)
++#define               SR_LED_MUX_LINK_ACTIVE          (1 << 6)
++#define               SR_LED_MUX_LINK                 (1 << 7)
++
++/* Register Access Flags */
++#define SR_REQ_RD_REG   (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
++#define SR_REQ_WR_REG   (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
++
++/* Multicast Filter Array size & Max Number */
++#define       SR_MCAST_FILTER_SIZE            8
++#define       SR_MAX_MCAST                    64
++
++/* IPG0/1/2 Default Value */
++#define       SR9800_IPG0_DEFAULT             0x15
++#define       SR9800_IPG1_DEFAULT             0x0c
++#define       SR9800_IPG2_DEFAULT             0x12
++
++/* Medium Status Default Mode */
++#define SR9800_MEDIUM_DEFAULT \
++      (SR_MEDIUM_FD | SR_MEDIUM_RFC | \
++       SR_MEDIUM_TFC | SR_MEDIUM_PS | \
++       SR_MEDIUM_AC | SR_MEDIUM_RE)
++
++/* RX Control Default Setting */
++#define SR_DEFAULT_RX_CTL     \
++      (SR_RX_CTL_SO | SR_RX_CTL_AB | SR_RX_CTL_RH1M)
++
++/* EEPROM Magic Number & EEPROM Size */
++#define SR_EEPROM_MAGIC                       0xdeadbeef
++#define SR9800_EEPROM_LEN             0xff
++
++/* SR9800 Driver Version and Driver Name */
++#define DRIVER_VERSION                        "11-Nov-2013"
++#define DRIVER_NAME                   "CoreChips"
++#define       DRIVER_FLAG             \
++      (FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |  FLAG_MULTI_PACKET)
++
++/* SR9800 BULKIN Buffer Size */
++#define SR9800_MAX_BULKIN_2K          0
++#define SR9800_MAX_BULKIN_4K          1
++#define SR9800_MAX_BULKIN_6K          2
++#define SR9800_MAX_BULKIN_8K          3
++#define SR9800_MAX_BULKIN_16K         4
++#define SR9800_MAX_BULKIN_20K         5
++#define SR9800_MAX_BULKIN_24K         6
++#define SR9800_MAX_BULKIN_32K         7
++
++struct {unsigned short size, byte_cnt, threshold; } SR9800_BULKIN_SIZE[] = {
++      /* 2k */
++      {2048, 0x8000, 0x8001},
++      /* 4k */
++      {4096, 0x8100, 0x8147},
++      /* 6k */
++      {6144, 0x8200, 0x81EB},
++      /* 8k */
++      {8192, 0x8300, 0x83D7},
++      /* 16 */
++      {16384, 0x8400, 0x851E},
++      /* 20k */
++      {20480, 0x8500, 0x8666},
++      /* 24k */
++      {24576, 0x8600, 0x87AE},
++      /* 32k */
++      {32768, 0x8700, 0x8A3D},
++};
++
++/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
++struct sr_data {
++      u8 multi_filter[SR_MCAST_FILTER_SIZE];
++      u8 mac_addr[ETH_ALEN];
++      u8 phymode;
++      u8 ledmode;
++      u8 eeprom_len;
++};
++
++struct sr9800_int_data {
++      __le16 res1;
++      u8 link;
++      __le16 res2;
++      u8 status;
++      __le16 res3;
++} __packed;
++
++#endif        /* _SR9800_H */
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/zaurus.c backports-3.18.1-1/drivers/net/usb/zaurus.c
+--- backports-3.18.1-1.org/drivers/net/usb/zaurus.c    1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/zaurus.c        2014-12-16 18:39:45.000000000 +0100
+@@ -0,0 +1,385 @@
++/*
++ * Copyright (C) 2002 Pavel Machek <pavel@ucw.cz>
++ * Copyright (C) 2002-2005 by David Brownell
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ */
++
++// #define    DEBUG                   // error path messages, extra info
++// #define    VERBOSE                 // more; success messages
++
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <linux/ethtool.h>
++#include <linux/workqueue.h>
++#include <linux/mii.h>
++#include <linux/crc32.h>
++#include <linux/usb.h>
++#include <linux/usb/cdc.h>
++#include <linux/usb/usbnet.h>
++
++
++/*
++ * All known Zaurii lie about their standards conformance.  At least
++ * the earliest SA-1100 models lie by saying they support CDC Ethernet.
++ * Some later models (especially PXA-25x and PXA-27x based ones) lie
++ * and say they support CDC MDLM (for access to cell phone modems).
++ *
++ * There are non-Zaurus products that use these same protocols too.
++ *
++ * The annoying thing is that at the same time Sharp was developing
++ * that annoying standards-breaking software, the Linux community had
++ * a simple "CDC Subset" working reliably on the same SA-1100 hardware.
++ * That is, the same functionality but not violating standards.
++ *
++ * The CDC Ethernet nonconformance points are troublesome to hosts
++ * with a true CDC Ethernet implementation:
++ *   - Framing appends a CRC, which the spec says drivers "must not" do;
++ *   - Transfers data in altsetting zero, instead of altsetting 1;
++ *   - All these peripherals use the same ethernet address.
++ *
++ * The CDC MDLM nonconformance is less immediately troublesome, since all
++ * MDLM implementations are quasi-proprietary anyway.
++ */
++
++static struct sk_buff *
++zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
++{
++      int                     padlen;
++      struct sk_buff          *skb2;
++
++      padlen = 2;
++      if (!skb_cloned(skb)) {
++              int     tailroom = skb_tailroom(skb);
++              if ((padlen + 4) <= tailroom)
++                      goto done;
++      }
++      skb2 = skb_copy_expand(skb, 0, 4 + padlen, flags);
++      dev_kfree_skb_any(skb);
++      skb = skb2;
++      if (skb) {
++              u32             fcs;
++done:
++              fcs = crc32_le(~0, skb->data, skb->len);
++              fcs = ~fcs;
++
++              *skb_put (skb, 1) = fcs       & 0xff;
++              *skb_put (skb, 1) = (fcs>> 8) & 0xff;
++              *skb_put (skb, 1) = (fcs>>16) & 0xff;
++              *skb_put (skb, 1) = (fcs>>24) & 0xff;
++      }
++      return skb;
++}
++
++static int zaurus_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      /* Belcarra's funky framing has other options; mostly
++       * TRAILERS (!) with 4 bytes CRC, and maybe 2 pad bytes.
++       */
++      dev->net->hard_header_len += 6;
++      dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
++      return usbnet_generic_cdc_bind(dev, intf);
++}
++
++/* PDA style devices are always connected if present */
++static int always_connected (struct usbnet *dev)
++{
++      return 0;
++}
++
++static const struct driver_info       zaurus_sl5x00_info = {
++      .description =  "Sharp Zaurus SL-5x00",
++      .flags =        FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
++      .check_connect = always_connected,
++      .bind =         zaurus_bind,
++      .unbind =       usbnet_cdc_unbind,
++      .tx_fixup =     zaurus_tx_fixup,
++};
++#define       ZAURUS_STRONGARM_INFO   ((unsigned long)&zaurus_sl5x00_info)
++
++static const struct driver_info       zaurus_pxa_info = {
++      .description =  "Sharp Zaurus, PXA-2xx based",
++      .flags =        FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
++      .check_connect = always_connected,
++      .bind =         zaurus_bind,
++      .unbind =       usbnet_cdc_unbind,
++      .tx_fixup =     zaurus_tx_fixup,
++};
++#define       ZAURUS_PXA_INFO         ((unsigned long)&zaurus_pxa_info)
++
++static const struct driver_info       olympus_mxl_info = {
++      .description =  "Olympus R1000",
++      .flags =        FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
++      .check_connect = always_connected,
++      .bind =         zaurus_bind,
++      .unbind =       usbnet_cdc_unbind,
++      .tx_fixup =     zaurus_tx_fixup,
++};
++#define       OLYMPUS_MXL_INFO        ((unsigned long)&olympus_mxl_info)
++
++
++/* Some more recent products using Lineo/Belcarra code will wrongly claim
++ * CDC MDLM conformance.  They aren't conformant:  data endpoints live
++ * in the control interface, there's no data interface, and it's not used
++ * to talk to a cell phone radio.  But at least we can detect these two
++ * pseudo-classes, rather than growing this product list with entries for
++ * each new nonconformant product (sigh).
++ */
++static const u8 safe_guid[16] = {
++      0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
++      0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
++};
++static const u8 blan_guid[16] = {
++      0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70,
++      0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37,
++};
++
++static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++      u8                              *buf = intf->cur_altsetting->extra;
++      int                             len = intf->cur_altsetting->extralen;
++      struct usb_cdc_mdlm_desc        *desc = NULL;
++      struct usb_cdc_mdlm_detail_desc *detail = NULL;
++
++      while (len > 3) {
++              if (buf [1] != USB_DT_CS_INTERFACE)
++                      goto next_desc;
++
++              /* use bDescriptorSubType, and just verify that we get a
++               * "BLAN" (or "SAFE") descriptor.
++               */
++              switch (buf [2]) {
++              case USB_CDC_MDLM_TYPE:
++                      if (desc) {
++                              dev_dbg(&intf->dev, "extra MDLM\n");
++                              goto bad_desc;
++                      }
++                      desc = (void *) buf;
++                      if (desc->bLength != sizeof *desc) {
++                              dev_dbg(&intf->dev, "MDLM len %u\n",
++                                      desc->bLength);
++                              goto bad_desc;
++                      }
++                      /* expect bcdVersion 1.0, ignore */
++                      if (memcmp(&desc->bGUID, blan_guid, 16) &&
++                          memcmp(&desc->bGUID, safe_guid, 16)) {
++                              /* hey, this one might _really_ be MDLM! */
++                              dev_dbg(&intf->dev, "MDLM guid\n");
++                              goto bad_desc;
++                      }
++                      break;
++              case USB_CDC_MDLM_DETAIL_TYPE:
++                      if (detail) {
++                              dev_dbg(&intf->dev, "extra MDLM detail\n");
++                              goto bad_desc;
++                      }
++                      detail = (void *) buf;
++                      switch (detail->bGuidDescriptorType) {
++                      case 0:                 /* "SAFE" */
++                              if (detail->bLength != (sizeof *detail + 2))
++                                      goto bad_detail;
++                              break;
++                      case 1:                 /* "BLAN" */
++                              if (detail->bLength != (sizeof *detail + 3))
++                                      goto bad_detail;
++                              break;
++                      default:
++                              goto bad_detail;
++                      }
++
++                      /* assuming we either noticed BLAN already, or will
++                       * find it soon, there are some data bytes here:
++                       *  - bmNetworkCapabilities (unused)
++                       *  - bmDataCapabilities (bits, see below)
++                       *  - bPad (ignored, for PADAFTER -- BLAN-only)
++                       * bits are:
++                       *  - 0x01 -- Zaurus framing (add CRC)
++                       *  - 0x02 -- PADBEFORE (CRC includes some padding)
++                       *  - 0x04 -- PADAFTER (some padding after CRC)
++                       *  - 0x08 -- "fermat" packet mangling (for hw bugs)
++                       * the PADBEFORE appears not to matter; we interop
++                       * with devices that use it and those that don't.
++                       */
++                      if ((detail->bDetailData[1] & ~0x02) != 0x01) {
++                              /* bmDataCapabilities == 0 would be fine too,
++                               * but framing is minidriver-coupled for now.
++                               */
++bad_detail:
++                              dev_dbg(&intf->dev,
++                                              "bad MDLM detail, %d %d %d\n",
++                                              detail->bLength,
++                                              detail->bDetailData[0],
++                                              detail->bDetailData[2]);
++                              goto bad_desc;
++                      }
++
++                      /* same extra framing as for non-BLAN mode */
++                      dev->net->hard_header_len += 6;
++                      dev->rx_urb_size = dev->net->hard_header_len
++                                      + dev->net->mtu;
++                      break;
++              }
++next_desc:
++              len -= buf [0]; /* bLength */
++              buf += buf [0];
++      }
++
++      if (!desc || !detail) {
++              dev_dbg(&intf->dev, "missing cdc mdlm %s%sdescriptor\n",
++                      desc ? "" : "func ",
++                      detail ? "" : "detail ");
++              goto bad_desc;
++      }
++
++      /* There's probably a CDC Ethernet descriptor there, but we can't
++       * rely on the Ethernet address it provides since not all vendors
++       * bother to make it unique.  Likewise there's no point in tracking
++       * of the CDC event notifications.
++       */
++      return usbnet_get_endpoints(dev, intf);
++
++bad_desc:
++      dev_info(&dev->udev->dev, "unsupported MDLM descriptors\n");
++      return -ENODEV;
++}
++
++static const struct driver_info       bogus_mdlm_info = {
++      .description =  "pseudo-MDLM (BLAN) device",
++      .flags =        FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
++      .check_connect = always_connected,
++      .tx_fixup =     zaurus_tx_fixup,
++      .bind =         blan_mdlm_bind,
++};
++
++static const struct usb_device_id     products [] = {
++#define       ZAURUS_MASTER_INTERFACE \
++      .bInterfaceClass        = USB_CLASS_COMM, \
++      .bInterfaceSubClass     = USB_CDC_SUBCLASS_ETHERNET, \
++      .bInterfaceProtocol     = USB_CDC_PROTO_NONE
++
++/* SA-1100 based Sharp Zaurus ("collie"), or compatible. */
++{
++      .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
++                        | USB_DEVICE_ID_MATCH_DEVICE,
++      .idVendor               = 0x04DD,
++      .idProduct              = 0x8004,
++      ZAURUS_MASTER_INTERFACE,
++      .driver_info = ZAURUS_STRONGARM_INFO,
++},
++
++/* PXA-2xx based models are also lying-about-cdc.  If you add any
++ * more devices that claim to be CDC Ethernet, make sure they get
++ * added to the blacklist in cdc_ether too.
++ *
++ * NOTE:  OpenZaurus versions with 2.6 kernels won't use these entries,
++ * unlike the older ones with 2.4 "embedix" kernels.
++ */
++{
++      .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
++                        | USB_DEVICE_ID_MATCH_DEVICE,
++      .idVendor               = 0x04DD,
++      .idProduct              = 0x8005,       /* A-300 */
++      ZAURUS_MASTER_INTERFACE,
++      .driver_info = ZAURUS_PXA_INFO,
++}, {
++      .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
++                        | USB_DEVICE_ID_MATCH_DEVICE,
++      .idVendor               = 0x04DD,
++      .idProduct              = 0x8006,       /* B-500/SL-5600 */
++      ZAURUS_MASTER_INTERFACE,
++      .driver_info = ZAURUS_PXA_INFO,
++}, {
++      .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
++                | USB_DEVICE_ID_MATCH_DEVICE,
++      .idVendor               = 0x04DD,
++      .idProduct              = 0x8007,       /* C-700 */
++      ZAURUS_MASTER_INTERFACE,
++      .driver_info = ZAURUS_PXA_INFO,
++}, {
++      .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
++               | USB_DEVICE_ID_MATCH_DEVICE,
++      .idVendor               = 0x04DD,
++      .idProduct              = 0x9031,       /* C-750 C-760 */
++      ZAURUS_MASTER_INTERFACE,
++      .driver_info = ZAURUS_PXA_INFO,
++}, {
++      /* C-750/C-760/C-860/SL-C3000 PDA in MDLM mode */
++      USB_DEVICE_AND_INTERFACE_INFO(0x04DD, 0x9031, USB_CLASS_COMM,
++                      USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
++      .driver_info = (unsigned long) &bogus_mdlm_info,
++}, {
++      .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
++               | USB_DEVICE_ID_MATCH_DEVICE,
++      .idVendor               = 0x04DD,
++      .idProduct              = 0x9032,       /* SL-6000 */
++      ZAURUS_MASTER_INTERFACE,
++      .driver_info = ZAURUS_PXA_INFO,
++}, {
++      .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
++               | USB_DEVICE_ID_MATCH_DEVICE,
++      .idVendor               = 0x04DD,
++      /* reported with some C860 units */
++      .idProduct              = 0x9050,       /* C-860 */
++      ZAURUS_MASTER_INTERFACE,
++      .driver_info = ZAURUS_PXA_INFO,
++},
++{
++      /* Motorola Rokr E6 */
++      USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6027, USB_CLASS_COMM,
++                      USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
++      .driver_info = (unsigned long) &bogus_mdlm_info,
++}, {
++      /* Motorola MOTOMAGX phones */
++      USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM,
++                      USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
++      .driver_info = (unsigned long) &bogus_mdlm_info,
++},
++
++/* Olympus has some models with a Zaurus-compatible option.
++ * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
++ */
++{
++      .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
++               | USB_DEVICE_ID_MATCH_DEVICE,
++      .idVendor               = 0x07B4,
++      .idProduct              = 0x0F02,       /* R-1000 */
++      ZAURUS_MASTER_INTERFACE,
++      .driver_info = OLYMPUS_MXL_INFO,
++},
++
++/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
++{
++      USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
++                      USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
++      .driver_info = (unsigned long) &bogus_mdlm_info,
++},
++      { },            // END
++};
++MODULE_DEVICE_TABLE(usb, products);
++
++static struct usb_driver zaurus_driver = {
++      .name =         "zaurus",
++      .id_table =     products,
++      .probe =        usbnet_probe,
++      .disconnect =   usbnet_disconnect,
++      .suspend =      usbnet_suspend,
++      .resume =       usbnet_resume,
++      .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(zaurus_driver);
++
++MODULE_AUTHOR("Pavel Machek, David Brownell");
++MODULE_DESCRIPTION("Sharp Zaurus PDA, and compatible products");
++MODULE_LICENSE("GPL");

diff --git a/src/patches/backports-3.18.1-1-grsecurity.patch b/src/patches/backports-3.18.1-1-grsecurity.patch
new file mode 100644 (file)
index 0000000..711f2e3
--- /dev/null
+++ b/src/patches/backports-3.18.1-1-grsecurity.patch
@@ -0,0 +1,3806 @@
+diff -Naur backports-3.18.1-1.org/drivers/bluetooth/btwilink.c backports-3.18.1-1/drivers/bluetooth/btwilink.c
+--- backports-3.18.1-1.org/drivers/bluetooth/btwilink.c        2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/drivers/bluetooth/btwilink.c    2014-12-28 14:10:09.480888533 +0100
+@@ -288,7 +288,7 @@
+ 
+ static int bt_ti_probe(struct platform_device *pdev)
+ {
+-      static struct ti_st *hst;
++      struct ti_st *hst;
+       struct hci_dev *hdev;
+       int err;
+ 
+diff -Naur backports-3.18.1-1.org/drivers/media/dvb-core/dvbdev.c backports-3.18.1-1/drivers/media/dvb-core/dvbdev.c
+--- backports-3.18.1-1.org/drivers/media/dvb-core/dvbdev.c     2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/media/dvb-core/dvbdev.c 2014-12-28 14:10:09.528888772 +0100
+@@ -185,7 +185,7 @@
+                       const struct dvb_device *template, void *priv, int type)
+ {
+       struct dvb_device *dvbdev;
+-      struct file_operations *dvbdevfops;
++      file_operations_no_const *dvbdevfops;
+       struct device *clsdev;
+       int minor;
+       int id;
+diff -Naur backports-3.18.1-1.org/drivers/media/dvb-frontends/af9033.h backports-3.18.1-1/drivers/media/dvb-frontends/af9033.h
+--- backports-3.18.1-1.org/drivers/media/dvb-frontends/af9033.h        2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/media/dvb-frontends/af9033.h    2014-12-28 14:10:09.528888772 +0100
+@@ -96,6 +96,6 @@
+       int (*pid_filter_ctrl)(struct dvb_frontend *fe, int onoff);
+       int (*pid_filter)(struct dvb_frontend *fe, int index, u16 pid,
+                         int onoff);
+-};
++} __no_const;
+ 
+ #endif /* AF9033_H */
+diff -Naur backports-3.18.1-1.org/drivers/media/dvb-frontends/dib3000.h backports-3.18.1-1/drivers/media/dvb-frontends/dib3000.h
+--- backports-3.18.1-1.org/drivers/media/dvb-frontends/dib3000.h       2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/media/dvb-frontends/dib3000.h   2014-12-28 14:10:09.528888772 +0100
+@@ -39,7 +39,7 @@
+       int (*fifo_ctrl)(struct dvb_frontend *fe, int onoff);
+       int (*pid_ctrl)(struct dvb_frontend *fe, int index, int pid, int onoff);
+       int (*tuner_pass_ctrl)(struct dvb_frontend *fe, int onoff, u8 pll_ctrl);
+-};
++} __no_const;
+ 
+ #if IS_ENABLED(CPTCFG_DVB_DIB3000MB)
+ extern struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config,
+diff -Naur backports-3.18.1-1.org/drivers/media/dvb-frontends/dib7000p.h backports-3.18.1-1/drivers/media/dvb-frontends/dib7000p.h
+--- backports-3.18.1-1.org/drivers/media/dvb-frontends/dib7000p.h      2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/media/dvb-frontends/dib7000p.h  2014-12-28 14:10:09.528888772 +0100
+@@ -64,7 +64,7 @@
+       int (*get_adc_power)(struct dvb_frontend *fe);
+       int (*slave_reset)(struct dvb_frontend *fe);
+       struct dvb_frontend *(*init)(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg);
+-};
++} __no_const;
+ 
+ #if IS_ENABLED(CPTCFG_DVB_DIB7000P)
+ void *dib7000p_attach(struct dib7000p_ops *ops);
+diff -Naur backports-3.18.1-1.org/drivers/media/dvb-frontends/dib8000.h backports-3.18.1-1/drivers/media/dvb-frontends/dib8000.h
+--- backports-3.18.1-1.org/drivers/media/dvb-frontends/dib8000.h       2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/media/dvb-frontends/dib8000.h   2014-12-28 14:10:09.528888772 +0100
+@@ -61,7 +61,7 @@
+       int (*pid_filter_ctrl)(struct dvb_frontend *fe, u8 onoff);
+       int (*pid_filter)(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff);
+       struct dvb_frontend *(*init)(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg);
+-};
++} __no_const;
+ 
+ #if IS_ENABLED(CPTCFG_DVB_DIB8000)
+ void *dib8000_attach(struct dib8000_ops *ops);
+diff -Naur backports-3.18.1-1.org/drivers/media/pci/cx88/cx88-video.c backports-3.18.1-1/drivers/media/pci/cx88/cx88-video.c
+--- backports-3.18.1-1.org/drivers/media/pci/cx88/cx88-video.c 2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/drivers/media/pci/cx88/cx88-video.c     2014-12-28 14:10:09.528888772 +0100
+@@ -50,9 +50,9 @@
+ 
+ /* ------------------------------------------------------------------ */
+ 
+-static unsigned int video_nr[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
+-static unsigned int vbi_nr[]   = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
+-static unsigned int radio_nr[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
++static int video_nr[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
++static int vbi_nr[]   = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
++static int radio_nr[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
+ 
+ module_param_array(video_nr, int, NULL, 0444);
+ module_param_array(vbi_nr,   int, NULL, 0444);
+diff -Naur backports-3.18.1-1.org/drivers/media/pci/ivtv/ivtv-driver.c backports-3.18.1-1/drivers/media/pci/ivtv/ivtv-driver.c
+--- backports-3.18.1-1.org/drivers/media/pci/ivtv/ivtv-driver.c        2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/drivers/media/pci/ivtv/ivtv-driver.c    2014-12-28 14:10:09.528888772 +0100
+@@ -83,7 +83,7 @@
+ MODULE_DEVICE_TABLE(pci,ivtv_pci_tbl);
+ 
+ /* ivtv instance counter */
+-static atomic_t ivtv_instance = ATOMIC_INIT(0);
++static atomic_unchecked_t ivtv_instance = ATOMIC_INIT(0);
+ 
+ /* Parameter declarations */
+ static int cardtype[IVTV_MAX_CARDS];
+diff -Naur backports-3.18.1-1.org/drivers/media/pci/solo6x10/solo6x10-core.c backports-3.18.1-1/drivers/media/pci/solo6x10/solo6x10-core.c
+--- backports-3.18.1-1.org/drivers/media/pci/solo6x10/solo6x10-core.c  2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/drivers/media/pci/solo6x10/solo6x10-core.c      2014-12-28 14:10:09.528888772 +0100
+@@ -424,7 +424,7 @@
+ 
+ static int solo_sysfs_init(struct solo_dev *solo_dev)
+ {
+-      struct bin_attribute *sdram_attr = &solo_dev->sdram_attr;
++      bin_attribute_no_const *sdram_attr = &solo_dev->sdram_attr;
+       struct device *dev = &solo_dev->dev;
+       const char *driver;
+       int i;
+diff -Naur backports-3.18.1-1.org/drivers/media/pci/solo6x10/solo6x10-g723.c backports-3.18.1-1/drivers/media/pci/solo6x10/solo6x10-g723.c
+--- backports-3.18.1-1.org/drivers/media/pci/solo6x10/solo6x10-g723.c  2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/drivers/media/pci/solo6x10/solo6x10-g723.c      2014-12-28 14:10:09.528888772 +0100
+@@ -351,7 +351,7 @@
+ 
+ int solo_g723_init(struct solo_dev *solo_dev)
+ {
+-      static struct snd_device_ops ops = { NULL };
++      static struct snd_device_ops ops = { };
+       struct snd_card *card;
+       struct snd_kcontrol_new kctl;
+       char name[32];
+diff -Naur backports-3.18.1-1.org/drivers/media/pci/solo6x10/solo6x10.h backports-3.18.1-1/drivers/media/pci/solo6x10/solo6x10.h
+--- backports-3.18.1-1.org/drivers/media/pci/solo6x10/solo6x10.h       2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/drivers/media/pci/solo6x10/solo6x10.h   2014-12-28 14:10:09.532888798 +0100
+@@ -219,7 +219,7 @@
+ 
+       /* P2M DMA Engine */
+       struct solo_p2m_dev     p2m_dev[SOLO_NR_P2M];
+-      atomic_t                p2m_count;
++      atomic_unchecked_t      p2m_count;
+       int                     p2m_jiffies;
+       unsigned int            p2m_timeouts;
+ 
+diff -Naur backports-3.18.1-1.org/drivers/media/pci/solo6x10/solo6x10-p2m.c backports-3.18.1-1/drivers/media/pci/solo6x10/solo6x10-p2m.c
+--- backports-3.18.1-1.org/drivers/media/pci/solo6x10/solo6x10-p2m.c   2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/drivers/media/pci/solo6x10/solo6x10-p2m.c       2014-12-28 14:10:09.532888798 +0100
+@@ -73,7 +73,7 @@
+ 
+       /* Get next ID. According to Softlogic, 6110 has problems on !=0 P2M */
+       if (solo_dev->type != SOLO_DEV_6110 && multi_p2m) {
+-              p2m_id = atomic_inc_return(&solo_dev->p2m_count) % SOLO_NR_P2M;
++              p2m_id = atomic_inc_return_unchecked(&solo_dev->p2m_count) % SOLO_NR_P2M;
+               if (p2m_id < 0)
+                       p2m_id = -p2m_id;
+       }
+diff -Naur backports-3.18.1-1.org/drivers/media/platform/omap/omap_vout.c backports-3.18.1-1/drivers/media/platform/omap/omap_vout.c
+--- backports-3.18.1-1.org/drivers/media/platform/omap/omap_vout.c     2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/drivers/media/platform/omap/omap_vout.c 2014-12-28 14:10:09.532888798 +0100
+@@ -63,7 +63,6 @@
+       OMAP_VIDEO2,
+ };
+ 
+-static struct videobuf_queue_ops video_vbq_ops;
+ /* Variables configurable through module params*/
+ static u32 video1_numbuffers = 3;
+ static u32 video2_numbuffers = 3;
+@@ -1012,6 +1011,12 @@
+ {
+       struct videobuf_queue *q;
+       struct omap_vout_device *vout = NULL;
++      static struct videobuf_queue_ops video_vbq_ops = {
++              .buf_setup = omap_vout_buffer_setup,
++              .buf_prepare = omap_vout_buffer_prepare,
++              .buf_release = omap_vout_buffer_release,
++              .buf_queue = omap_vout_buffer_queue,
++      };
+ 
+       vout = video_drvdata(file);
+       v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "Entering %s\n", __func__);
+@@ -1029,10 +1034,6 @@
+       vout->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+ 
+       q = &vout->vbq;
+-      video_vbq_ops.buf_setup = omap_vout_buffer_setup;
+-      video_vbq_ops.buf_prepare = omap_vout_buffer_prepare;
+-      video_vbq_ops.buf_release = omap_vout_buffer_release;
+-      video_vbq_ops.buf_queue = omap_vout_buffer_queue;
+       spin_lock_init(&vout->vbq_lock);
+ 
+       videobuf_queue_dma_contig_init(q, &video_vbq_ops, q->dev,
+diff -Naur backports-3.18.1-1.org/drivers/media/platform/s5p-tv/mixer_grp_layer.c backports-3.18.1-1/drivers/media/platform/s5p-tv/mixer_grp_layer.c
+--- backports-3.18.1-1.org/drivers/media/platform/s5p-tv/mixer_grp_layer.c     2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/drivers/media/platform/s5p-tv/mixer_grp_layer.c 2014-12-28 14:10:09.532888798 +0100
+@@ -235,7 +235,7 @@
+ {
+       struct mxr_layer *layer;
+       int ret;
+-      struct mxr_layer_ops ops = {
++      static struct mxr_layer_ops ops = {
+               .release = mxr_graph_layer_release,
+               .buffer_set = mxr_graph_buffer_set,
+               .stream_set = mxr_graph_stream_set,
+diff -Naur backports-3.18.1-1.org/drivers/media/platform/s5p-tv/mixer.h backports-3.18.1-1/drivers/media/platform/s5p-tv/mixer.h
+--- backports-3.18.1-1.org/drivers/media/platform/s5p-tv/mixer.h       2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/drivers/media/platform/s5p-tv/mixer.h   2014-12-28 14:10:09.532888798 +0100
+@@ -156,7 +156,7 @@
+       /** layer index (unique identifier) */
+       int idx;
+       /** callbacks for layer methods */
+-      struct mxr_layer_ops ops;
++      struct mxr_layer_ops *ops;
+       /** format array */
+       const struct mxr_format **fmt_array;
+       /** size of format array */
+diff -Naur backports-3.18.1-1.org/drivers/media/platform/s5p-tv/mixer_reg.c backports-3.18.1-1/drivers/media/platform/s5p-tv/mixer_reg.c
+--- backports-3.18.1-1.org/drivers/media/platform/s5p-tv/mixer_reg.c   2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/drivers/media/platform/s5p-tv/mixer_reg.c       2014-12-28 14:10:09.532888798 +0100
+@@ -276,7 +276,7 @@
+               layer->update_buf = next;
+       }
+ 
+-      layer->ops.buffer_set(layer, layer->update_buf);
++      layer->ops->buffer_set(layer, layer->update_buf);
+ 
+       if (done && done != layer->shadow_buf)
+               vb2_buffer_done(&done->vb, VB2_BUF_STATE_DONE);
+diff -Naur backports-3.18.1-1.org/drivers/media/platform/s5p-tv/mixer_video.c backports-3.18.1-1/drivers/media/platform/s5p-tv/mixer_video.c
+--- backports-3.18.1-1.org/drivers/media/platform/s5p-tv/mixer_video.c 2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/drivers/media/platform/s5p-tv/mixer_video.c     2014-12-28 14:10:09.532888798 +0100
+@@ -210,7 +210,7 @@
+       layer->geo.src.height = layer->geo.src.full_height;
+ 
+       mxr_geometry_dump(mdev, &layer->geo);
+-      layer->ops.fix_geometry(layer, MXR_GEOMETRY_SINK, 0);
++      layer->ops->fix_geometry(layer, MXR_GEOMETRY_SINK, 0);
+       mxr_geometry_dump(mdev, &layer->geo);
+ }
+ 
+@@ -228,7 +228,7 @@
+       layer->geo.dst.full_width = mbus_fmt.width;
+       layer->geo.dst.full_height = mbus_fmt.height;
+       layer->geo.dst.field = mbus_fmt.field;
+-      layer->ops.fix_geometry(layer, MXR_GEOMETRY_SINK, 0);
++      layer->ops->fix_geometry(layer, MXR_GEOMETRY_SINK, 0);
+ 
+       mxr_geometry_dump(mdev, &layer->geo);
+ }
+@@ -334,7 +334,7 @@
+       /* set source size to highest accepted value */
+       geo->src.full_width = max(geo->dst.full_width, pix->width);
+       geo->src.full_height = max(geo->dst.full_height, pix->height);
+-      layer->ops.fix_geometry(layer, MXR_GEOMETRY_SOURCE, 0);
++      layer->ops->fix_geometry(layer, MXR_GEOMETRY_SOURCE, 0);
+       mxr_geometry_dump(mdev, &layer->geo);
+       /* set cropping to total visible screen */
+       geo->src.width = pix->width;
+@@ -342,12 +342,12 @@
+       geo->src.x_offset = 0;
+       geo->src.y_offset = 0;
+       /* assure consistency of geometry */
+-      layer->ops.fix_geometry(layer, MXR_GEOMETRY_CROP, MXR_NO_OFFSET);
++      layer->ops->fix_geometry(layer, MXR_GEOMETRY_CROP, MXR_NO_OFFSET);
+       mxr_geometry_dump(mdev, &layer->geo);
+       /* set full size to lowest possible value */
+       geo->src.full_width = 0;
+       geo->src.full_height = 0;
+-      layer->ops.fix_geometry(layer, MXR_GEOMETRY_SOURCE, 0);
++      layer->ops->fix_geometry(layer, MXR_GEOMETRY_SOURCE, 0);
+       mxr_geometry_dump(mdev, &layer->geo);
+ 
+       /* returning results */
+@@ -474,7 +474,7 @@
+               target->width = s->r.width;
+               target->height = s->r.height;
+ 
+-              layer->ops.fix_geometry(layer, stage, s->flags);
++              layer->ops->fix_geometry(layer, stage, s->flags);
+ 
+               /* retrieve update selection rectangle */
+               res.left = target->x_offset;
+@@ -954,13 +954,13 @@
+       mxr_output_get(mdev);
+ 
+       mxr_layer_update_output(layer);
+-      layer->ops.format_set(layer);
++      layer->ops->format_set(layer);
+       /* enabling layer in hardware */
+       spin_lock_irqsave(&layer->enq_slock, flags);
+       layer->state = MXR_LAYER_STREAMING;
+       spin_unlock_irqrestore(&layer->enq_slock, flags);
+ 
+-      layer->ops.stream_set(layer, MXR_ENABLE);
++      layer->ops->stream_set(layer, MXR_ENABLE);
+       mxr_streamer_get(mdev);
+ 
+       return 0;
+@@ -1030,7 +1030,7 @@
+       spin_unlock_irqrestore(&layer->enq_slock, flags);
+ 
+       /* disabling layer in hardware */
+-      layer->ops.stream_set(layer, MXR_DISABLE);
++      layer->ops->stream_set(layer, MXR_DISABLE);
+       /* remove one streamer */
+       mxr_streamer_put(mdev);
+       /* allow changes in output configuration */
+@@ -1068,8 +1068,8 @@
+ 
+ void mxr_layer_release(struct mxr_layer *layer)
+ {
+-      if (layer->ops.release)
+-              layer->ops.release(layer);
++      if (layer->ops->release)
++              layer->ops->release(layer);
+ }
+ 
+ void mxr_base_layer_release(struct mxr_layer *layer)
+@@ -1095,7 +1095,7 @@
+ 
+       layer->mdev = mdev;
+       layer->idx = idx;
+-      layer->ops = *ops;
++      layer->ops = ops;
+ 
+       spin_lock_init(&layer->enq_slock);
+       INIT_LIST_HEAD(&layer->enq_list);
+diff -Naur backports-3.18.1-1.org/drivers/media/platform/s5p-tv/mixer_vp_layer.c backports-3.18.1-1/drivers/media/platform/s5p-tv/mixer_vp_layer.c
+--- backports-3.18.1-1.org/drivers/media/platform/s5p-tv/mixer_vp_layer.c      2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/drivers/media/platform/s5p-tv/mixer_vp_layer.c  2014-12-28 14:10:09.532888798 +0100
+@@ -206,7 +206,7 @@
+ {
+       struct mxr_layer *layer;
+       int ret;
+-      struct mxr_layer_ops ops = {
++      static struct mxr_layer_ops ops = {
+               .release = mxr_vp_layer_release,
+               .buffer_set = mxr_vp_buffer_set,
+               .stream_set = mxr_vp_stream_set,
+diff -Naur backports-3.18.1-1.org/drivers/media/radio/radio-cadet.c backports-3.18.1-1/drivers/media/radio/radio-cadet.c
+--- backports-3.18.1-1.org/drivers/media/radio/radio-cadet.c   2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/drivers/media/radio/radio-cadet.c       2014-12-28 14:10:09.532888798 +0100
+@@ -333,6 +333,8 @@
+       unsigned char readbuf[RDS_BUFFER];
+       int i = 0;
+ 
++      if (count > RDS_BUFFER)
++              return -EFAULT;
+       mutex_lock(&dev->lock);
+       if (dev->rdsstat == 0)
+               cadet_start_rds(dev);
+@@ -349,8 +351,9 @@
+               readbuf[i++] = dev->rdsbuf[dev->rdsout++];
+       mutex_unlock(&dev->lock);
+ 
+-      if (i && copy_to_user(data, readbuf, i))
+-              return -EFAULT;
++      if (i > sizeof(readbuf) || (i && copy_to_user(data, readbuf, i)))
++              i = -EFAULT;
++
+       return i;
+ }
+ 
+diff -Naur backports-3.18.1-1.org/drivers/media/radio/radio-maxiradio.c backports-3.18.1-1/drivers/media/radio/radio-maxiradio.c
+--- backports-3.18.1-1.org/drivers/media/radio/radio-maxiradio.c       2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/drivers/media/radio/radio-maxiradio.c   2014-12-28 14:10:09.532888798 +0100
+@@ -61,7 +61,7 @@
+ /* TEA5757 pin mappings */
+ static const int clk = 1, data = 2, wren = 4, mo_st = 8, power = 16;
+ 
+-static atomic_t maxiradio_instance = ATOMIC_INIT(0);
++static atomic_unchecked_t maxiradio_instance = ATOMIC_INIT(0);
+ 
+ #define PCI_VENDOR_ID_GUILLEMOT 0x5046
+ #define PCI_DEVICE_ID_GUILLEMOT_MAXIRADIO 0x1001
+diff -Naur backports-3.18.1-1.org/drivers/media/radio/radio-shark2.c backports-3.18.1-1/drivers/media/radio/radio-shark2.c
+--- backports-3.18.1-1.org/drivers/media/radio/radio-shark2.c  2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/drivers/media/radio/radio-shark2.c      2014-12-28 14:10:09.532888798 +0100
+@@ -74,7 +74,7 @@
+       u8 *transfer_buffer;
+ };
+ 
+-static atomic_t shark_instance = ATOMIC_INIT(0);
++static atomic_unchecked_t shark_instance = ATOMIC_INIT(0);
+ 
+ static int shark_write_reg(struct radio_tea5777 *tea, u64 reg)
+ {
+diff -Naur backports-3.18.1-1.org/drivers/media/radio/radio-shark.c backports-3.18.1-1/drivers/media/radio/radio-shark.c
+--- backports-3.18.1-1.org/drivers/media/radio/radio-shark.c   2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/drivers/media/radio/radio-shark.c       2014-12-28 14:10:09.532888798 +0100
+@@ -79,7 +79,7 @@
+       u32 last_val;
+ };
+ 
+-static atomic_t shark_instance = ATOMIC_INIT(0);
++static atomic_unchecked_t shark_instance = ATOMIC_INIT(0);
+ 
+ static void shark_write_val(struct snd_tea575x *tea, u32 val)
+ {
+diff -Naur backports-3.18.1-1.org/drivers/media/radio/radio-si476x.c backports-3.18.1-1/drivers/media/radio/radio-si476x.c
+--- backports-3.18.1-1.org/drivers/media/radio/radio-si476x.c  2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/drivers/media/radio/radio-si476x.c      2014-12-28 14:10:09.532888798 +0100
+@@ -1445,7 +1445,7 @@
+       struct si476x_radio *radio;
+       struct v4l2_ctrl *ctrl;
+ 
+-      static atomic_t instance = ATOMIC_INIT(0);
++      static atomic_unchecked_t instance = ATOMIC_INIT(0);
+ 
+       radio = devm_kzalloc(&pdev->dev, sizeof(*radio), GFP_KERNEL);
+       if (!radio)
+diff -Naur backports-3.18.1-1.org/drivers/media/usb/dvb-usb/cinergyT2-core.c backports-3.18.1-1/drivers/media/usb/dvb-usb/cinergyT2-core.c
+--- backports-3.18.1-1.org/drivers/media/usb/dvb-usb/cinergyT2-core.c  2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/media/usb/dvb-usb/cinergyT2-core.c      2014-12-28 14:10:09.532888798 +0100
+@@ -50,29 +50,73 @@
+ 
+ static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable)
+ {
+-      char buf[] = { CINERGYT2_EP1_CONTROL_STREAM_TRANSFER, enable ? 1 : 0 };
+-      char result[64];
+-      return dvb_usb_generic_rw(adap->dev, buf, sizeof(buf), result,
+-                              sizeof(result), 0);
++      char *buf;
++      char *result;
++      int retval;
++
++      buf = kmalloc(2, GFP_KERNEL);
++      if (buf == NULL)
++              return -ENOMEM;
++      result = kmalloc(64, GFP_KERNEL);
++      if (result == NULL) {
++              kfree(buf);
++              return -ENOMEM;
++      }
++
++      buf[0] = CINERGYT2_EP1_CONTROL_STREAM_TRANSFER;
++      buf[1] = enable ? 1 : 0;
++
++      retval = dvb_usb_generic_rw(adap->dev, buf, 2, result, 64, 0);
++
++      kfree(buf);
++      kfree(result);
++      return retval;
+ }
+ 
+ static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable)
+ {
+-      char buf[] = { CINERGYT2_EP1_SLEEP_MODE, enable ? 0 : 1 };
+-      char state[3];
+-      return dvb_usb_generic_rw(d, buf, sizeof(buf), state, sizeof(state), 0);
++      char *buf;
++      char *state;
++      int retval;
++
++      buf = kmalloc(2, GFP_KERNEL);
++      if (buf == NULL)
++              return -ENOMEM;
++      state = kmalloc(3, GFP_KERNEL);
++      if (state == NULL) {
++              kfree(buf);
++              return -ENOMEM;
++      }
++
++      buf[0] = CINERGYT2_EP1_SLEEP_MODE;
++      buf[1] = enable ? 1 : 0;
++
++      retval = dvb_usb_generic_rw(d, buf, 2, state, 3, 0);
++
++      kfree(buf);
++      kfree(state);
++      return retval;
+ }
+ 
+ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
+ {
+-      char query[] = { CINERGYT2_EP1_GET_FIRMWARE_VERSION };
+-      char state[3];
++      char *query;
++      char *state;
+       int ret;
++      query = kmalloc(1, GFP_KERNEL);
++      if (query == NULL)
++              return -ENOMEM;
++      state = kmalloc(3, GFP_KERNEL);
++      if (state == NULL) {
++              kfree(query);
++              return -ENOMEM;
++      }
++
++      query[0] = CINERGYT2_EP1_GET_FIRMWARE_VERSION;
+ 
+       adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev);
+ 
+-      ret = dvb_usb_generic_rw(adap->dev, query, sizeof(query), state,
+-                              sizeof(state), 0);
++      ret = dvb_usb_generic_rw(adap->dev, query, 1, state, 3, 0);
+       if (ret < 0) {
+               deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep "
+                       "state info\n");
+@@ -80,7 +124,8 @@
+ 
+       /* Copy this pointer as we are gonna need it in the release phase */
+       cinergyt2_usb_device = adap->dev;
+-
++      kfree(query);
++      kfree(state);
+       return 0;
+ }
+ 
+@@ -141,12 +186,23 @@
+ static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+ {
+       struct cinergyt2_state *st = d->priv;
+-      u8 key[5] = {0, 0, 0, 0, 0}, cmd = CINERGYT2_EP1_GET_RC_EVENTS;
++      u8 *key, *cmd;
+       int i;
+ 
++      cmd = kmalloc(1, GFP_KERNEL);
++      if (cmd == NULL)
++              return -EINVAL;
++      key = kzalloc(5, GFP_KERNEL);
++      if (key == NULL) {
++              kfree(cmd);
++              return -EINVAL;
++      }
++
++      cmd[0] = CINERGYT2_EP1_GET_RC_EVENTS;
++
+       *state = REMOTE_NO_KEY_PRESSED;
+ 
+-      dvb_usb_generic_rw(d, &cmd, 1, key, sizeof(key), 0);
++      dvb_usb_generic_rw(d, cmd, 1, key, 5, 0);
+       if (key[4] == 0xff) {
+               /* key repeat */
+               st->rc_counter++;
+@@ -157,12 +213,12 @@
+                                       *event = d->last_event;
+                                       deb_rc("repeat key, event %x\n",
+                                                  *event);
+-                                      return 0;
++                                      goto out;
+                               }
+                       }
+                       deb_rc("repeated key (non repeatable)\n");
+               }
+-              return 0;
++              goto out;
+       }
+ 
+       /* hack to pass checksum on the custom field */
+@@ -174,6 +230,9 @@
+ 
+               deb_rc("key: %*ph\n", 5, key);
+       }
++out:
++      kfree(cmd);
++      kfree(key);
+       return 0;
+ }
+ 
+diff -Naur backports-3.18.1-1.org/drivers/media/usb/dvb-usb/cinergyT2-fe.c backports-3.18.1-1/drivers/media/usb/dvb-usb/cinergyT2-fe.c
+--- backports-3.18.1-1.org/drivers/media/usb/dvb-usb/cinergyT2-fe.c    2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/media/usb/dvb-usb/cinergyT2-fe.c        2014-12-28 14:10:09.532888798 +0100
+@@ -145,103 +145,176 @@
+                                       fe_status_t *status)
+ {
+       struct cinergyt2_fe_state *state = fe->demodulator_priv;
+-      struct dvbt_get_status_msg result;
+-      u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
++      struct dvbt_get_status_msg *result;
++      u8 *cmd;
+       int ret;
+ 
+-      ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&result,
+-                      sizeof(result), 0);
++      cmd = kmalloc(1, GFP_KERNEL);
++      if (cmd == NULL)
++              return -ENOMEM;
++      result = kmalloc(sizeof(*result), GFP_KERNEL);
++      if (result == NULL) {
++              kfree(cmd);
++              return -ENOMEM;
++      }
++
++      cmd[0] = CINERGYT2_EP1_GET_TUNER_STATUS;
++
++      ret = dvb_usb_generic_rw(state->d, cmd, 1, (u8 *)result,
++                      sizeof(*result), 0);
+       if (ret < 0)
+-              return ret;
++              goto out;
+ 
+       *status = 0;
+ 
+-      if (0xffff - le16_to_cpu(result.gain) > 30)
++      if (0xffff - le16_to_cpu(result->gain) > 30)
+               *status |= FE_HAS_SIGNAL;
+-      if (result.lock_bits & (1 << 6))
++      if (result->lock_bits & (1 << 6))
+               *status |= FE_HAS_LOCK;
+-      if (result.lock_bits & (1 << 5))
++      if (result->lock_bits & (1 << 5))
+               *status |= FE_HAS_SYNC;
+-      if (result.lock_bits & (1 << 4))
++      if (result->lock_bits & (1 << 4))
+               *status |= FE_HAS_CARRIER;
+-      if (result.lock_bits & (1 << 1))
++      if (result->lock_bits & (1 << 1))
+               *status |= FE_HAS_VITERBI;
+ 
+       if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) !=
+                       (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC))
+               *status &= ~FE_HAS_LOCK;
+ 
+-      return 0;
++out:
++      kfree(cmd);
++      kfree(result);
++      return ret;
+ }
+ 
+ static int cinergyt2_fe_read_ber(struct dvb_frontend *fe, u32 *ber)
+ {
+       struct cinergyt2_fe_state *state = fe->demodulator_priv;
+-      struct dvbt_get_status_msg status;
+-      char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
++      struct dvbt_get_status_msg *status;
++      char *cmd;
+       int ret;
+ 
+-      ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status,
+-                              sizeof(status), 0);
++      cmd = kmalloc(1, GFP_KERNEL);
++      if (cmd == NULL)
++              return -ENOMEM;
++      status = kmalloc(sizeof(*status), GFP_KERNEL);
++      if (status == NULL) {
++              kfree(cmd);
++              return -ENOMEM;
++      }
++
++      cmd[0] = CINERGYT2_EP1_GET_TUNER_STATUS;
++
++      ret = dvb_usb_generic_rw(state->d, cmd, 1, (char *)status,
++                              sizeof(*status), 0);
+       if (ret < 0)
+-              return ret;
++              goto out;
+ 
+-      *ber = le32_to_cpu(status.viterbi_error_rate);
++      *ber = le32_to_cpu(status->viterbi_error_rate);
++out:
++      kfree(cmd);
++      kfree(status);
+       return 0;
+ }
+ 
+ static int cinergyt2_fe_read_unc_blocks(struct dvb_frontend *fe, u32 *unc)
+ {
+       struct cinergyt2_fe_state *state = fe->demodulator_priv;
+-      struct dvbt_get_status_msg status;
+-      u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
++      struct dvbt_get_status_msg *status;
++      u8 *cmd;
+       int ret;
+ 
+-      ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&status,
+-                              sizeof(status), 0);
++      cmd = kmalloc(1, GFP_KERNEL);
++      if (cmd == NULL)
++              return -ENOMEM;
++      status = kmalloc(sizeof(*status), GFP_KERNEL);
++      if (status == NULL) {
++              kfree(cmd);
++              return -ENOMEM;
++      }
++
++      cmd[0] = CINERGYT2_EP1_GET_TUNER_STATUS;
++
++      ret = dvb_usb_generic_rw(state->d, cmd, 1, (u8 *)status,
++                              sizeof(*status), 0);
+       if (ret < 0) {
+               err("cinergyt2_fe_read_unc_blocks() Failed! (Error=%d)\n",
+                       ret);
+-              return ret;
++              goto out;
+       }
+-      *unc = le32_to_cpu(status.uncorrected_block_count);
+-      return 0;
++      *unc = le32_to_cpu(status->uncorrected_block_count);
++
++out:
++      kfree(cmd);
++      kfree(status);
++      return ret;
+ }
+ 
+ static int cinergyt2_fe_read_signal_strength(struct dvb_frontend *fe,
+                                               u16 *strength)
+ {
+       struct cinergyt2_fe_state *state = fe->demodulator_priv;
+-      struct dvbt_get_status_msg status;
+-      char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
++      struct dvbt_get_status_msg *status;
++      char *cmd;
+       int ret;
+ 
+-      ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status,
+-                              sizeof(status), 0);
++      cmd = kmalloc(1, GFP_KERNEL);
++      if (cmd == NULL)
++              return -ENOMEM;
++      status = kmalloc(sizeof(*status), GFP_KERNEL);
++      if (status == NULL) {
++              kfree(cmd);
++              return -ENOMEM;
++      }
++
++      cmd[0] = CINERGYT2_EP1_GET_TUNER_STATUS;
++
++      ret = dvb_usb_generic_rw(state->d, cmd, 1, (char *)status,
++                              sizeof(*status), 0);
+       if (ret < 0) {
+               err("cinergyt2_fe_read_signal_strength() Failed!"
+                       " (Error=%d)\n", ret);
+-              return ret;
++              goto out;
+       }
+-      *strength = (0xffff - le16_to_cpu(status.gain));
++      *strength = (0xffff - le16_to_cpu(status->gain));
++
++out:
++      kfree(cmd);
++      kfree(status);
+       return 0;
+ }
+ 
+ static int cinergyt2_fe_read_snr(struct dvb_frontend *fe, u16 *snr)
+ {
+       struct cinergyt2_fe_state *state = fe->demodulator_priv;
+-      struct dvbt_get_status_msg status;
+-      char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
++      struct dvbt_get_status_msg *status;
++      char *cmd;
+       int ret;
+ 
+-      ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status,
+-                              sizeof(status), 0);
++      cmd = kmalloc(1, GFP_KERNEL);
++      if (cmd == NULL)
++              return -ENOMEM;
++      status = kmalloc(sizeof(*status), GFP_KERNEL);
++      if (status == NULL) {
++              kfree(cmd);
++              return -ENOMEM;
++      }
++
++      cmd[0] = CINERGYT2_EP1_GET_TUNER_STATUS;
++
++      ret = dvb_usb_generic_rw(state->d, cmd, 1, (char *)status,
++                              sizeof(*status), 0);
+       if (ret < 0) {
+               err("cinergyt2_fe_read_snr() Failed! (Error=%d)\n", ret);
+-              return ret;
++              goto out;
+       }
+-      *snr = (status.snr << 8) | status.snr;
+-      return 0;
++      *snr = (status->snr << 8) | status->snr;
++
++out:
++      kfree(cmd);
++      kfree(status);
++      return ret;
+ }
+ 
+ static int cinergyt2_fe_init(struct dvb_frontend *fe)
+@@ -266,35 +339,46 @@
+ {
+       struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
+       struct cinergyt2_fe_state *state = fe->demodulator_priv;
+-      struct dvbt_set_parameters_msg param;
+-      char result[2];
++      struct dvbt_set_parameters_msg *param;
++      char *result;
+       int err;
+ 
+-      param.cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS;
+-      param.tps = cpu_to_le16(compute_tps(fep));
+-      param.freq = cpu_to_le32(fep->frequency / 1000);
+-      param.flags = 0;
++      result = kmalloc(2, GFP_KERNEL);
++      if (result == NULL)
++              return -ENOMEM;
++      param = kmalloc(sizeof(*param), GFP_KERNEL);
++      if (param == NULL) {
++              kfree(result);
++              return -ENOMEM;
++      }
++
++      param->cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS;
++      param->tps = cpu_to_le16(compute_tps(fep));
++      param->freq = cpu_to_le32(fep->frequency / 1000);
++      param->flags = 0;
+ 
+       switch (fep->bandwidth_hz) {
+       default:
+       case 8000000:
+-              param.bandwidth = 8;
++              param->bandwidth = 8;
+               break;
+       case 7000000:
+-              param.bandwidth = 7;
++              param->bandwidth = 7;
+               break;
+       case 6000000:
+-              param.bandwidth = 6;
++              param->bandwidth = 6;
+               break;
+       }
+ 
+       err = dvb_usb_generic_rw(state->d,
+-                      (char *)&param, sizeof(param),
+-                      result, sizeof(result), 0);
++                      (char *)param, sizeof(*param),
++                      result, 2, 0);
+       if (err < 0)
+               err("cinergyt2_fe_set_frontend() Failed! err=%d\n", err);
+ 
+-      return (err < 0) ? err : 0;
++      kfree(result);
++      kfree(param);
++      return err;
+ }
+ 
+ static void cinergyt2_fe_release(struct dvb_frontend *fe)
+diff -Naur backports-3.18.1-1.org/drivers/media/usb/dvb-usb/dvb-usb-firmware.c backports-3.18.1-1/drivers/media/usb/dvb-usb/dvb-usb-firmware.c
+--- backports-3.18.1-1.org/drivers/media/usb/dvb-usb/dvb-usb-firmware.c        2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/media/usb/dvb-usb/dvb-usb-firmware.c    2014-12-28 14:10:09.532888798 +0100
+@@ -35,42 +35,57 @@
+ 
+ int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw, int type)
+ {
+-      struct hexline hx;
+-      u8 reset;
++      struct hexline *hx;
++      u8 *reset;
+       int ret,pos=0;
+ 
++      reset = kmalloc(1, GFP_KERNEL);
++      if (reset == NULL)
++              return -ENOMEM;
++
++      hx = kmalloc(sizeof(struct hexline), GFP_KERNEL);
++      if (hx == NULL) {
++              kfree(reset);
++              return -ENOMEM;
++      }
++
+       /* stop the CPU */
+-      reset = 1;
+-      if ((ret = usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1)) != 1)
++      reset[0] = 1;
++      if ((ret = usb_cypress_writemem(udev,cypress[type].cpu_cs_register,reset,1)) != 1)
+               err("could not stop the USB controller CPU.");
+ 
+-      while ((ret = dvb_usb_get_hexline(fw,&hx,&pos)) > 0) {
+-              deb_fw("writing to address 0x%04x (buffer: 0x%02x %02x)\n",hx.addr,hx.len,hx.chk);
+-              ret = usb_cypress_writemem(udev,hx.addr,hx.data,hx.len);
++      while ((ret = dvb_usb_get_hexline(fw,hx,&pos)) > 0) {
++              deb_fw("writing to address 0x%04x (buffer: 0x%02x %02x)\n",hx->addr,hx->len,hx->chk);
++              ret = usb_cypress_writemem(udev,hx->addr,hx->data,hx->len);
+ 
+-              if (ret != hx.len) {
++              if (ret != hx->len) {
+                       err("error while transferring firmware "
+                               "(transferred size: %d, block size: %d)",
+-                              ret,hx.len);
++                              ret,hx->len);
+                       ret = -EINVAL;
+                       break;
+               }
+       }
+       if (ret < 0) {
+               err("firmware download failed at %d with %d",pos,ret);
++              kfree(reset);
++              kfree(hx);
+               return ret;
+       }
+ 
+       if (ret == 0) {
+               /* restart the CPU */
+-              reset = 0;
+-              if (ret || usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1) != 1) {
++              reset[0] = 0;
++              if (ret || usb_cypress_writemem(udev,cypress[type].cpu_cs_register,reset,1) != 1) {
+                       err("could not restart the USB controller CPU.");
+                       ret = -EINVAL;
+               }
+       } else
+               ret = -EIO;
+ 
++      kfree(reset);
++      kfree(hx);
++
+       return ret;
+ }
+ EXPORT_SYMBOL(usb_cypress_load_firmware);
+diff -Naur backports-3.18.1-1.org/drivers/media/usb/dvb-usb/dw2102.c backports-3.18.1-1/drivers/media/usb/dvb-usb/dw2102.c
+--- backports-3.18.1-1.org/drivers/media/usb/dvb-usb/dw2102.c  2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/media/usb/dvb-usb/dw2102.c      2014-12-28 14:10:09.536888811 +0100
+@@ -118,7 +118,7 @@
+ 
+ struct s6x0_state {
+       int (*old_set_voltage)(struct dvb_frontend *f, fe_sec_voltage_t v);
+-};
++} __no_const;
+ 
+ /* debug */
+ static int dvb_usb_dw2102_debug;
+diff -Naur backports-3.18.1-1.org/drivers/media/usb/dvb-usb/technisat-usb2.c backports-3.18.1-1/drivers/media/usb/dvb-usb/technisat-usb2.c
+--- backports-3.18.1-1.org/drivers/media/usb/dvb-usb/technisat-usb2.c  2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/media/usb/dvb-usb/technisat-usb2.c      2014-12-28 14:10:09.536888811 +0100
+@@ -87,8 +87,11 @@
+ static int technisat_usb2_i2c_access(struct usb_device *udev,
+               u8 device_addr, u8 *tx, u8 txlen, u8 *rx, u8 rxlen)
+ {
+-      u8 b[64];
+-      int ret, actual_length;
++      u8 *b = kmalloc(64, GFP_KERNEL);
++      int ret, actual_length, error = 0;
++
++      if (b == NULL)
++              return -ENOMEM;
+ 
+       deb_i2c("i2c-access: %02x, tx: ", device_addr);
+       debug_dump(tx, txlen, deb_i2c);
+@@ -121,7 +124,8 @@
+ 
+       if (ret < 0) {
+               err("i2c-error: out failed %02x = %d", device_addr, ret);
+-              return -ENODEV;
++              error = -ENODEV;
++              goto out;
+       }
+ 
+       ret = usb_bulk_msg(udev,
+@@ -129,7 +133,8 @@
+                       b, 64, &actual_length, 1000);
+       if (ret < 0) {
+               err("i2c-error: in failed %02x = %d", device_addr, ret);
+-              return -ENODEV;
++              error = -ENODEV;
++              goto out;
+       }
+ 
+       if (b[0] != I2C_STATUS_OK) {
+@@ -137,8 +142,10 @@
+               /* handle tuner-i2c-nak */
+               if (!(b[0] == I2C_STATUS_NAK &&
+                               device_addr == 0x60
+-                              /* && device_is_technisat_usb2 */))
+-                      return -ENODEV;
++                              /* && device_is_technisat_usb2 */)) {
++                      error = -ENODEV;
++                      goto out;
++              }
+       }
+ 
+       deb_i2c("status: %d, ", b[0]);
+@@ -152,7 +159,9 @@
+ 
+       deb_i2c("\n");
+ 
+-      return 0;
++out:
++      kfree(b);
++      return error;
+ }
+ 
+ static int technisat_usb2_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
+@@ -224,14 +233,16 @@
+ {
+       int ret;
+ 
+-      u8 led[8] = {
+-              red ? SET_RED_LED_VENDOR_REQUEST : SET_GREEN_LED_VENDOR_REQUEST,
+-              0
+-      };
++      u8 *led = kzalloc(8, GFP_KERNEL);
++
++      if (led == NULL)
++              return -ENOMEM;
+ 
+       if (disable_led_control && state != TECH_LED_OFF)
+               return 0;
+ 
++      led[0] = red ? SET_RED_LED_VENDOR_REQUEST : SET_GREEN_LED_VENDOR_REQUEST;
++
+       switch (state) {
+       case TECH_LED_ON:
+               led[1] = 0x82;
+@@ -263,16 +274,22 @@
+               red ? SET_RED_LED_VENDOR_REQUEST : SET_GREEN_LED_VENDOR_REQUEST,
+               USB_TYPE_VENDOR | USB_DIR_OUT,
+               0, 0,
+-              led, sizeof(led), 500);
++              led, 8, 500);
+ 
+       mutex_unlock(&d->i2c_mutex);
++
++      kfree(led);
++
+       return ret;
+ }
+ 
+ static int technisat_usb2_set_led_timer(struct dvb_usb_device *d, u8 red, u8 green)
+ {
+       int ret;
+-      u8 b = 0;
++      u8 *b = kzalloc(1, GFP_KERNEL);
++
++      if (b == NULL)
++              return -ENOMEM;
+ 
+       if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+               return -EAGAIN;
+@@ -281,10 +298,12 @@
+               SET_LED_TIMER_DIVIDER_VENDOR_REQUEST,
+               USB_TYPE_VENDOR | USB_DIR_OUT,
+               (red << 8) | green, 0,
+-              &b, 1, 500);
++              b, 1, 500);
+ 
+       mutex_unlock(&d->i2c_mutex);
+ 
++      kfree(b);
++
+       return ret;
+ }
+ 
+@@ -328,7 +347,7 @@
+               struct dvb_usb_device_description **desc, int *cold)
+ {
+       int ret;
+-      u8 version[3];
++      u8 *version = kmalloc(3, GFP_KERNEL);
+ 
+       /* first select the interface */
+       if (usb_set_interface(udev, 0, 1) != 0)
+@@ -338,11 +357,14 @@
+ 
+       *cold = 0; /* by default do not download a firmware - just in case something is wrong */
+ 
++      if (version == NULL)
++              return 0;
++
+       ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+               GET_VERSION_INFO_VENDOR_REQUEST,
+               USB_TYPE_VENDOR | USB_DIR_IN,
+               0, 0,
+-              version, sizeof(version), 500);
++              version, 3, 500);
+ 
+       if (ret < 0)
+               *cold = 1;
+@@ -351,6 +373,8 @@
+               *cold = 0;
+       }
+ 
++      kfree(version);
++
+       return 0;
+ }
+ 
+@@ -591,10 +615,15 @@
+ 
+ static int technisat_usb2_get_ir(struct dvb_usb_device *d)
+ {
+-      u8 buf[62], *b;
++      u8 *buf, *b;
+       int ret;
+       struct ir_raw_event ev;
+ 
++      buf = kmalloc(62, GFP_KERNEL);
++
++      if (buf == NULL)
++              return -ENOMEM;
++
+       buf[0] = GET_IR_DATA_VENDOR_REQUEST;
+       buf[1] = 0x08;
+       buf[2] = 0x8f;
+@@ -617,16 +646,20 @@
+                       GET_IR_DATA_VENDOR_REQUEST,
+                       USB_TYPE_VENDOR | USB_DIR_IN,
+                       0x8080, 0,
+-                      buf, sizeof(buf), 500);
++                      buf, 62, 500);
+ 
+ unlock:
+       mutex_unlock(&d->i2c_mutex);
+ 
+-      if (ret < 0)
++      if (ret < 0) {
++              kfree(buf);
+               return ret;
++      }
+ 
+-      if (ret == 1)
++      if (ret == 1) {
++              kfree(buf);
+               return 0; /* no key pressed */
++      }
+ 
+       /* decoding */
+       b = buf+1;
+@@ -653,6 +686,8 @@
+ 
+       ir_raw_event_handle(d->rc_dev);
+ 
++      kfree(buf);
++
+       return 1;
+ }
+ 
+diff -Naur backports-3.18.1-1.org/drivers/media/v4l2-core/v4l2-device.c backports-3.18.1-1/drivers/media/v4l2-core/v4l2-device.c
+--- backports-3.18.1-1.org/drivers/media/v4l2-core/v4l2-device.c       2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/media/v4l2-core/v4l2-device.c   2014-12-28 14:10:09.536888811 +0100
+@@ -75,9 +75,9 @@
+ EXPORT_SYMBOL_GPL(v4l2_device_put);
+ 
+ int v4l2_device_set_name(struct v4l2_device *v4l2_dev, const char *basename,
+-                                              atomic_t *instance)
++                                              atomic_unchecked_t *instance)
+ {
+-      int num = atomic_inc_return(instance) - 1;
++      int num = atomic_inc_return_unchecked(instance) - 1;
+       int len = strlen(basename);
+ 
+       if (basename[len - 1] >= '0' && basename[len - 1] <= '9')
+diff -Naur backports-3.18.1-1.org/drivers/media/v4l2-core/v4l2-ioctl.c backports-3.18.1-1/drivers/media/v4l2-core/v4l2-ioctl.c
+--- backports-3.18.1-1.org/drivers/media/v4l2-core/v4l2-ioctl.c        2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/media/v4l2-core/v4l2-ioctl.c    2014-12-28 14:10:09.536888811 +0100
+@@ -2142,7 +2142,8 @@
+                               struct file *file, void *fh, void *p);
+       } u;
+       void (*debug)(const void *arg, bool write_only);
+-};
++} __do_const;
++typedef struct v4l2_ioctl_info __no_const v4l2_ioctl_info_no_const;
+ 
+ /* This control needs a priority check */
+ #define INFO_FL_PRIO  (1 << 0)
+@@ -2326,7 +2327,7 @@
+       struct video_device *vfd = video_devdata(file);
+       const struct v4l2_ioctl_ops *ops = vfd->ioctl_ops;
+       bool write_only = false;
+-      struct v4l2_ioctl_info default_info;
++      v4l2_ioctl_info_no_const default_info;
+       const struct v4l2_ioctl_info *info;
+       void *fh = file->private_data;
+       struct v4l2_fh *vfh = NULL;
+@@ -2413,7 +2414,7 @@
+                               ret = -EINVAL;
+                               break;
+                       }
+-                      *user_ptr = (void __user *)buf->m.planes;
++                      *user_ptr = (void __force_user *)buf->m.planes;
+                       *kernel_ptr = (void **)&buf->m.planes;
+                       *array_size = sizeof(struct v4l2_plane) * buf->length;
+                       ret = 1;
+@@ -2430,7 +2431,7 @@
+                               ret = -EINVAL;
+                               break;
+                       }
+-                      *user_ptr = (void __user *)edid->edid;
++                      *user_ptr = (void __force_user *)edid->edid;
+                       *kernel_ptr = (void **)&edid->edid;
+                       *array_size = edid->blocks * 128;
+                       ret = 1;
+@@ -2448,7 +2449,7 @@
+                               ret = -EINVAL;
+                               break;
+                       }
+-                      *user_ptr = (void __user *)ctrls->controls;
++                      *user_ptr = (void __force_user *)ctrls->controls;
+                       *kernel_ptr = (void **)&ctrls->controls;
+                       *array_size = sizeof(struct v4l2_ext_control)
+                                   * ctrls->count;
+@@ -2549,7 +2550,7 @@
+       }
+ 
+       if (has_array_args) {
+-              *kernel_ptr = (void __force *)user_ptr;
++              *kernel_ptr = (void __force_kernel *)user_ptr;
+               if (copy_to_user(user_ptr, mbuf, array_size))
+                       err = -EFAULT;
+               goto out_array_args;
+diff -Naur backports-3.18.1-1.org/drivers/net/ieee802154/fakehard.c backports-3.18.1-1/drivers/net/ieee802154/fakehard.c
+--- backports-3.18.1-1.org/drivers/net/ieee802154/fakehard.c   2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/ieee802154/fakehard.c       2014-12-28 14:10:09.556888909 +0100
+@@ -365,7 +365,7 @@
+       phy->transmit_power = 0xbf;
+ 
+       dev->netdev_ops = &fake_ops;
+-      dev->ml_priv = &fake_mlme;
++      dev->ml_priv = (void *)&fake_mlme;
+ 
+       priv = netdev_priv(dev);
+       priv->phy = phy;
+diff -Naur backports-3.18.1-1.org/drivers/net/usb/sierra_net.c backports-3.18.1-1/drivers/net/usb/sierra_net.c
+--- backports-3.18.1-1.org/drivers/net/usb/sierra_net.c        2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/usb/sierra_net.c    2014-12-28 14:10:09.560888936 +0100
+@@ -51,7 +51,7 @@
+ /* atomic counter partially included in MAC address to make sure 2 devices
+  * do not end up with the same MAC - concept breaks in case of > 255 ifaces
+  */
+-static        atomic_t iface_counter = ATOMIC_INIT(0);
++static        atomic_unchecked_t iface_counter = ATOMIC_INIT(0);
+ 
+ /*
+  * SYNC Timer Delay definition used to set the expiry time
+@@ -697,7 +697,7 @@
+       dev->net->netdev_ops = &sierra_net_device_ops;
+ 
+       /* change MAC addr to include, ifacenum, and to be unique */
+-      dev->net->dev_addr[ETH_ALEN-2] = atomic_inc_return(&iface_counter);
++      dev->net->dev_addr[ETH_ALEN-2] = atomic_inc_return_unchecked(&iface_counter);
+       dev->net->dev_addr[ETH_ALEN-1] = ifacenum;
+ 
+       /* we will have to manufacture ethernet headers, prepare template */
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/at76c50x-usb.c backports-3.18.1-1/drivers/net/wireless/at76c50x-usb.c
+--- backports-3.18.1-1.org/drivers/net/wireless/at76c50x-usb.c 2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/at76c50x-usb.c     2014-12-28 14:10:09.560888936 +0100
+@@ -353,7 +353,7 @@
+ }
+ 
+ /* Convert timeout from the DFU status to jiffies */
+-static inline unsigned long at76_get_timeout(struct dfu_status *s)
++static inline unsigned long __intentional_overflow(-1) at76_get_timeout(struct dfu_status *s)
+ {
+       return msecs_to_jiffies((s->poll_timeout[2] << 16)
+                               | (s->poll_timeout[1] << 8)
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/ath/ath10k/htc.c backports-3.18.1-1/drivers/net/wireless/ath/ath10k/htc.c
+--- backports-3.18.1-1.org/drivers/net/wireless/ath/ath10k/htc.c       2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/ath/ath10k/htc.c   2014-12-28 14:10:09.560888936 +0100
+@@ -848,7 +848,10 @@
+ /* registered target arrival callback from the HIF layer */
+ int ath10k_htc_init(struct ath10k *ar)
+ {
+-      struct ath10k_hif_cb htc_callbacks;
++      static struct ath10k_hif_cb htc_callbacks = {
++              .rx_completion = ath10k_htc_rx_completion_handler,
++              .tx_completion = ath10k_htc_tx_completion_handler,
++      };
+       struct ath10k_htc_ep *ep = NULL;
+       struct ath10k_htc *htc = &ar->htc;
+ 
+@@ -857,8 +860,6 @@
+       ath10k_htc_reset_endpoint_states(htc);
+ 
+       /* setup HIF layer callbacks */
+-      htc_callbacks.rx_completion = ath10k_htc_rx_completion_handler;
+-      htc_callbacks.tx_completion = ath10k_htc_tx_completion_handler;
+       htc->ar = ar;
+ 
+       /* Get HIF default pipe for HTC message exchange */
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/ath/ath10k/htc.h backports-3.18.1-1/drivers/net/wireless/ath/ath10k/htc.h
+--- backports-3.18.1-1.org/drivers/net/wireless/ath/ath10k/htc.h       2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/ath/ath10k/htc.h   2014-12-28 14:10:09.560888936 +0100
+@@ -270,13 +270,13 @@
+ 
+ struct ath10k_htc_ops {
+       void (*target_send_suspend_complete)(struct ath10k *ar);
+-};
++} __no_const;
+ 
+ struct ath10k_htc_ep_ops {
+       void (*ep_tx_complete)(struct ath10k *, struct sk_buff *);
+       void (*ep_rx_complete)(struct ath10k *, struct sk_buff *);
+       void (*ep_tx_credits)(struct ath10k *);
+-};
++} __no_const;
+ 
+ /* service connection information */
+ struct ath10k_htc_svc_conn_req {
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/ath/ath9k/ar9002_mac.c backports-3.18.1-1/drivers/net/wireless/ath/ath9k/ar9002_mac.c
+--- backports-3.18.1-1.org/drivers/net/wireless/ath/ath9k/ar9002_mac.c 2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/ath/ath9k/ar9002_mac.c     2014-12-28 14:10:09.560888936 +0100
+@@ -220,8 +220,8 @@
+       ads->ds_txstatus6 = ads->ds_txstatus7 = 0;
+       ads->ds_txstatus8 = ads->ds_txstatus9 = 0;
+ 
+-      ACCESS_ONCE(ads->ds_link) = i->link;
+-      ACCESS_ONCE(ads->ds_data) = i->buf_addr[0];
++      ACCESS_ONCE_RW(ads->ds_link) = i->link;
++      ACCESS_ONCE_RW(ads->ds_data) = i->buf_addr[0];
+ 
+       ctl1 = i->buf_len[0] | (i->is_last ? 0 : AR_TxMore);
+       ctl6 = SM(i->keytype, AR_EncrType);
+@@ -235,26 +235,26 @@
+ 
+       if ((i->is_first || i->is_last) &&
+           i->aggr != AGGR_BUF_MIDDLE && i->aggr != AGGR_BUF_LAST) {
+-              ACCESS_ONCE(ads->ds_ctl2) = set11nTries(i->rates, 0)
++              ACCESS_ONCE_RW(ads->ds_ctl2) = set11nTries(i->rates, 0)
+                       | set11nTries(i->rates, 1)
+                       | set11nTries(i->rates, 2)
+                       | set11nTries(i->rates, 3)
+                       | (i->dur_update ? AR_DurUpdateEna : 0)
+                       | SM(0, AR_BurstDur);
+ 
+-              ACCESS_ONCE(ads->ds_ctl3) = set11nRate(i->rates, 0)
++              ACCESS_ONCE_RW(ads->ds_ctl3) = set11nRate(i->rates, 0)
+                       | set11nRate(i->rates, 1)
+                       | set11nRate(i->rates, 2)
+                       | set11nRate(i->rates, 3);
+       } else {
+-              ACCESS_ONCE(ads->ds_ctl2) = 0;
+-              ACCESS_ONCE(ads->ds_ctl3) = 0;
++              ACCESS_ONCE_RW(ads->ds_ctl2) = 0;
++              ACCESS_ONCE_RW(ads->ds_ctl3) = 0;
+       }
+ 
+       if (!i->is_first) {
+-              ACCESS_ONCE(ads->ds_ctl0) = 0;
+-              ACCESS_ONCE(ads->ds_ctl1) = ctl1;
+-              ACCESS_ONCE(ads->ds_ctl6) = ctl6;
++              ACCESS_ONCE_RW(ads->ds_ctl0) = 0;
++              ACCESS_ONCE_RW(ads->ds_ctl1) = ctl1;
++              ACCESS_ONCE_RW(ads->ds_ctl6) = ctl6;
+               return;
+       }
+ 
+@@ -279,7 +279,7 @@
+               break;
+       }
+ 
+-      ACCESS_ONCE(ads->ds_ctl0) = (i->pkt_len & AR_FrameLen)
++      ACCESS_ONCE_RW(ads->ds_ctl0) = (i->pkt_len & AR_FrameLen)
+               | (i->flags & ATH9K_TXDESC_VMF ? AR_VirtMoreFrag : 0)
+               | SM(i->txpower, AR_XmitPower0)
+               | (i->flags & ATH9K_TXDESC_VEOL ? AR_VEOL : 0)
+@@ -289,27 +289,27 @@
+               | (i->flags & ATH9K_TXDESC_RTSENA ? AR_RTSEnable :
+                  (i->flags & ATH9K_TXDESC_CTSENA ? AR_CTSEnable : 0));
+ 
+-      ACCESS_ONCE(ads->ds_ctl1) = ctl1;
+-      ACCESS_ONCE(ads->ds_ctl6) = ctl6;
++      ACCESS_ONCE_RW(ads->ds_ctl1) = ctl1;
++      ACCESS_ONCE_RW(ads->ds_ctl6) = ctl6;
+ 
+       if (i->aggr == AGGR_BUF_MIDDLE || i->aggr == AGGR_BUF_LAST)
+               return;
+ 
+-      ACCESS_ONCE(ads->ds_ctl4) = set11nPktDurRTSCTS(i->rates, 0)
++      ACCESS_ONCE_RW(ads->ds_ctl4) = set11nPktDurRTSCTS(i->rates, 0)
+               | set11nPktDurRTSCTS(i->rates, 1);
+ 
+-      ACCESS_ONCE(ads->ds_ctl5) = set11nPktDurRTSCTS(i->rates, 2)
++      ACCESS_ONCE_RW(ads->ds_ctl5) = set11nPktDurRTSCTS(i->rates, 2)
+               | set11nPktDurRTSCTS(i->rates, 3);
+ 
+-      ACCESS_ONCE(ads->ds_ctl7) = set11nRateFlags(i->rates, 0)
++      ACCESS_ONCE_RW(ads->ds_ctl7) = set11nRateFlags(i->rates, 0)
+               | set11nRateFlags(i->rates, 1)
+               | set11nRateFlags(i->rates, 2)
+               | set11nRateFlags(i->rates, 3)
+               | SM(i->rtscts_rate, AR_RTSCTSRate);
+ 
+-      ACCESS_ONCE(ads->ds_ctl9) = SM(i->txpower, AR_XmitPower1);
+-      ACCESS_ONCE(ads->ds_ctl10) = SM(i->txpower, AR_XmitPower2);
+-      ACCESS_ONCE(ads->ds_ctl11) = SM(i->txpower, AR_XmitPower3);
++      ACCESS_ONCE_RW(ads->ds_ctl9) = SM(i->txpower, AR_XmitPower1);
++      ACCESS_ONCE_RW(ads->ds_ctl10) = SM(i->txpower, AR_XmitPower2);
++      ACCESS_ONCE_RW(ads->ds_ctl11) = SM(i->txpower, AR_XmitPower3);
+ }
+ 
+ static int ar9002_hw_proc_txdesc(struct ath_hw *ah, void *ds,
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/ath/ath9k/ar9003_mac.c backports-3.18.1-1/drivers/net/wireless/ath/ath9k/ar9003_mac.c
+--- backports-3.18.1-1.org/drivers/net/wireless/ath/ath9k/ar9003_mac.c 2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/ath/ath9k/ar9003_mac.c     2014-12-28 14:10:09.560888936 +0100
+@@ -39,47 +39,47 @@
+             (i->qcu << AR_TxQcuNum_S) | desc_len;
+ 
+       checksum += val;
+-      ACCESS_ONCE(ads->info) = val;
++      ACCESS_ONCE_RW(ads->info) = val;
+ 
+       checksum += i->link;
+-      ACCESS_ONCE(ads->link) = i->link;
++      ACCESS_ONCE_RW(ads->link) = i->link;
+ 
+       checksum += i->buf_addr[0];
+-      ACCESS_ONCE(ads->data0) = i->buf_addr[0];
++      ACCESS_ONCE_RW(ads->data0) = i->buf_addr[0];
+       checksum += i->buf_addr[1];
+-      ACCESS_ONCE(ads->data1) = i->buf_addr[1];
++      ACCESS_ONCE_RW(ads->data1) = i->buf_addr[1];
+       checksum += i->buf_addr[2];
+-      ACCESS_ONCE(ads->data2) = i->buf_addr[2];
++      ACCESS_ONCE_RW(ads->data2) = i->buf_addr[2];
+       checksum += i->buf_addr[3];
+-      ACCESS_ONCE(ads->data3) = i->buf_addr[3];
++      ACCESS_ONCE_RW(ads->data3) = i->buf_addr[3];
+ 
+       checksum += (val = (i->buf_len[0] << AR_BufLen_S) & AR_BufLen);
+-      ACCESS_ONCE(ads->ctl3) = val;
++      ACCESS_ONCE_RW(ads->ctl3) = val;
+       checksum += (val = (i->buf_len[1] << AR_BufLen_S) & AR_BufLen);
+-      ACCESS_ONCE(ads->ctl5) = val;
++      ACCESS_ONCE_RW(ads->ctl5) = val;
+       checksum += (val = (i->buf_len[2] << AR_BufLen_S) & AR_BufLen);
+-      ACCESS_ONCE(ads->ctl7) = val;
++      ACCESS_ONCE_RW(ads->ctl7) = val;
+       checksum += (val = (i->buf_len[3] << AR_BufLen_S) & AR_BufLen);
+-      ACCESS_ONCE(ads->ctl9) = val;
++      ACCESS_ONCE_RW(ads->ctl9) = val;
+ 
+       checksum = (u16) (((checksum & 0xffff) + (checksum >> 16)) & 0xffff);
+-      ACCESS_ONCE(ads->ctl10) = checksum;
++      ACCESS_ONCE_RW(ads->ctl10) = checksum;
+ 
+       if (i->is_first || i->is_last) {
+-              ACCESS_ONCE(ads->ctl13) = set11nTries(i->rates, 0)
++              ACCESS_ONCE_RW(ads->ctl13) = set11nTries(i->rates, 0)
+                       | set11nTries(i->rates, 1)
+                       | set11nTries(i->rates, 2)
+                       | set11nTries(i->rates, 3)
+                       | (i->dur_update ? AR_DurUpdateEna : 0)
+                       | SM(0, AR_BurstDur);
+ 
+-              ACCESS_ONCE(ads->ctl14) = set11nRate(i->rates, 0)
++              ACCESS_ONCE_RW(ads->ctl14) = set11nRate(i->rates, 0)
+                       | set11nRate(i->rates, 1)
+                       | set11nRate(i->rates, 2)
+                       | set11nRate(i->rates, 3);
+       } else {
+-              ACCESS_ONCE(ads->ctl13) = 0;
+-              ACCESS_ONCE(ads->ctl14) = 0;
++              ACCESS_ONCE_RW(ads->ctl13) = 0;
++              ACCESS_ONCE_RW(ads->ctl14) = 0;
+       }
+ 
+       ads->ctl20 = 0;
+@@ -89,17 +89,17 @@
+ 
+       ctl17 = SM(i->keytype, AR_EncrType);
+       if (!i->is_first) {
+-              ACCESS_ONCE(ads->ctl11) = 0;
+-              ACCESS_ONCE(ads->ctl12) = i->is_last ? 0 : AR_TxMore;
+-              ACCESS_ONCE(ads->ctl15) = 0;
+-              ACCESS_ONCE(ads->ctl16) = 0;
+-              ACCESS_ONCE(ads->ctl17) = ctl17;
+-              ACCESS_ONCE(ads->ctl18) = 0;
+-              ACCESS_ONCE(ads->ctl19) = 0;
++              ACCESS_ONCE_RW(ads->ctl11) = 0;
++              ACCESS_ONCE_RW(ads->ctl12) = i->is_last ? 0 : AR_TxMore;
++              ACCESS_ONCE_RW(ads->ctl15) = 0;
++              ACCESS_ONCE_RW(ads->ctl16) = 0;
++              ACCESS_ONCE_RW(ads->ctl17) = ctl17;
++              ACCESS_ONCE_RW(ads->ctl18) = 0;
++              ACCESS_ONCE_RW(ads->ctl19) = 0;
+               return;
+       }
+ 
+-      ACCESS_ONCE(ads->ctl11) = (i->pkt_len & AR_FrameLen)
++      ACCESS_ONCE_RW(ads->ctl11) = (i->pkt_len & AR_FrameLen)
+               | (i->flags & ATH9K_TXDESC_VMF ? AR_VirtMoreFrag : 0)
+               | SM(i->txpower, AR_XmitPower0)
+               | (i->flags & ATH9K_TXDESC_VEOL ? AR_VEOL : 0)
+@@ -135,26 +135,26 @@
+       val = (i->flags & ATH9K_TXDESC_PAPRD) >> ATH9K_TXDESC_PAPRD_S;
+       ctl12 |= SM(val, AR_PAPRDChainMask);
+ 
+-      ACCESS_ONCE(ads->ctl12) = ctl12;
+-      ACCESS_ONCE(ads->ctl17) = ctl17;
++      ACCESS_ONCE_RW(ads->ctl12) = ctl12;
++      ACCESS_ONCE_RW(ads->ctl17) = ctl17;
+ 
+-      ACCESS_ONCE(ads->ctl15) = set11nPktDurRTSCTS(i->rates, 0)
++      ACCESS_ONCE_RW(ads->ctl15) = set11nPktDurRTSCTS(i->rates, 0)
+               | set11nPktDurRTSCTS(i->rates, 1);
+ 
+-      ACCESS_ONCE(ads->ctl16) = set11nPktDurRTSCTS(i->rates, 2)
++      ACCESS_ONCE_RW(ads->ctl16) = set11nPktDurRTSCTS(i->rates, 2)
+               | set11nPktDurRTSCTS(i->rates, 3);
+ 
+-      ACCESS_ONCE(ads->ctl18) = set11nRateFlags(i->rates, 0)
++      ACCESS_ONCE_RW(ads->ctl18) = set11nRateFlags(i->rates, 0)
+               | set11nRateFlags(i->rates, 1)
+               | set11nRateFlags(i->rates, 2)
+               | set11nRateFlags(i->rates, 3)
+               | SM(i->rtscts_rate, AR_RTSCTSRate);
+ 
+-      ACCESS_ONCE(ads->ctl19) = AR_Not_Sounding;
++      ACCESS_ONCE_RW(ads->ctl19) = AR_Not_Sounding;
+ 
+-      ACCESS_ONCE(ads->ctl20) = SM(i->txpower, AR_XmitPower1);
+-      ACCESS_ONCE(ads->ctl21) = SM(i->txpower, AR_XmitPower2);
+-      ACCESS_ONCE(ads->ctl22) = SM(i->txpower, AR_XmitPower3);
++      ACCESS_ONCE_RW(ads->ctl20) = SM(i->txpower, AR_XmitPower1);
++      ACCESS_ONCE_RW(ads->ctl21) = SM(i->txpower, AR_XmitPower2);
++      ACCESS_ONCE_RW(ads->ctl22) = SM(i->txpower, AR_XmitPower3);
+ }
+ 
+ static u16 ar9003_calc_ptr_chksum(struct ar9003_txc *ads)
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/ath/ath9k/hw.h backports-3.18.1-1/drivers/net/wireless/ath/ath9k/hw.h
+--- backports-3.18.1-1.org/drivers/net/wireless/ath/ath9k/hw.h 2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/ath/ath9k/hw.h     2014-12-28 14:10:09.564888946 +0100
+@@ -630,7 +630,7 @@
+ 
+       /* ANI */
+       void (*ani_cache_ini_regs)(struct ath_hw *ah);
+-};
++} __no_const;
+ 
+ /**
+  * struct ath_spec_scan - parameters for Atheros spectral scan
+@@ -708,7 +708,7 @@
+ #ifdef CPTCFG_ATH9K_BTCOEX_SUPPORT
+       void (*set_bt_ant_diversity)(struct ath_hw *hw, bool enable);
+ #endif
+-};
++} __no_const;
+ 
+ struct ath_nf_limits {
+       s16 max;
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/ath/ath9k/main.c backports-3.18.1-1/drivers/net/wireless/ath/ath9k/main.c
+--- backports-3.18.1-1.org/drivers/net/wireless/ath/ath9k/main.c       2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/ath/ath9k/main.c   2014-12-28 14:24:49.169250593 +0100
+@@ -2454,16 +2454,18 @@
+       if (!ath9k_is_chanctx_enabled())
+               return;
+ 
+-      ath9k_ops.hw_scan                  = ath9k_hw_scan;
+-      ath9k_ops.cancel_hw_scan           = ath9k_cancel_hw_scan;
+-      ath9k_ops.remain_on_channel        = ath9k_remain_on_channel;
+-      ath9k_ops.cancel_remain_on_channel = ath9k_cancel_remain_on_channel;
+-      ath9k_ops.add_chanctx              = ath9k_add_chanctx;
+-      ath9k_ops.remove_chanctx           = ath9k_remove_chanctx;
+-      ath9k_ops.change_chanctx           = ath9k_change_chanctx;
+-      ath9k_ops.assign_vif_chanctx       = ath9k_assign_vif_chanctx;
+-      ath9k_ops.unassign_vif_chanctx     = ath9k_unassign_vif_chanctx;
+-      ath9k_ops.mgd_prepare_tx           = ath9k_mgd_prepare_tx;
++      pax_open_kernel();
++      *(void **)&ath9k_ops.hw_scan                  = ath9k_hw_scan;
++      *(void **)&ath9k_ops.cancel_hw_scan           = ath9k_cancel_hw_scan;
++      *(void **)&ath9k_ops.remain_on_channel        = ath9k_remain_on_channel;
++      *(void **)&ath9k_ops.cancel_remain_on_channel = ath9k_cancel_remain_on_channel;
++      *(void **)&ath9k_ops.add_chanctx              = ath9k_add_chanctx;
++      *(void **)&ath9k_ops.remove_chanctx           = ath9k_remove_chanctx;
++      *(void **)&ath9k_ops.change_chanctx           = ath9k_change_chanctx;
++      *(void **)&ath9k_ops.assign_vif_chanctx       = ath9k_assign_vif_chanctx;
++      *(void **)&ath9k_ops.unassign_vif_chanctx     = ath9k_unassign_vif_chanctx;
++      *(void **)&ath9k_ops.mgd_prepare_tx           = ath9k_mgd_prepare_tx;
++      pax_close_kernel();
+ }
+ 
+ #endif
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/b43/phy_lp.c backports-3.18.1-1/drivers/net/wireless/b43/phy_lp.c
+--- backports-3.18.1-1.org/drivers/net/wireless/b43/phy_lp.c   2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/b43/phy_lp.c       2014-12-28 14:10:09.564888946 +0100
+@@ -2502,7 +2502,7 @@
+ {
+       struct ssb_bus *bus = dev->dev->sdev->bus;
+ 
+-      static const struct b206x_channel *chandata = NULL;
++      const struct b206x_channel *chandata = NULL;
+       u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
+       u32 freqref, vco_freq, val1, val2, val3, timeout, timeoutref, count;
+       u16 old_comm15, scale;
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/iwlegacy/3945-mac.c backports-3.18.1-1/drivers/net/wireless/iwlegacy/3945-mac.c
+--- backports-3.18.1-1.org/drivers/net/wireless/iwlegacy/3945-mac.c    2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/iwlegacy/3945-mac.c        2014-12-28 14:10:09.564888946 +0100
+@@ -3633,7 +3633,9 @@
+        */
+       if (il3945_mod_params.disable_hw_scan) {
+               D_INFO("Disabling hw_scan\n");
+-              il3945_mac_ops.hw_scan = NULL;
++              pax_open_kernel();
++              *(void **)&il3945_mac_ops.hw_scan = NULL;
++              pax_close_kernel();
+       }
+ 
+       D_INFO("*** LOAD DRIVER ***\n");
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/iwlwifi/dvm/debugfs.c backports-3.18.1-1/drivers/net/wireless/iwlwifi/dvm/debugfs.c
+--- backports-3.18.1-1.org/drivers/net/wireless/iwlwifi/dvm/debugfs.c  2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/iwlwifi/dvm/debugfs.c      2014-12-28 14:10:09.564888946 +0100
+@@ -188,7 +188,7 @@
+ {
+       struct iwl_priv *priv = file->private_data;
+       char buf[64];
+-      int buf_size;
++      size_t buf_size;
+       u32 offset, len;
+ 
+       memset(buf, 0, sizeof(buf));
+@@ -458,7 +458,7 @@
+       struct iwl_priv *priv = file->private_data;
+ 
+       char buf[8];
+-      int buf_size;
++      size_t buf_size;
+       u32 reset_flag;
+ 
+       memset(buf, 0, sizeof(buf));
+@@ -539,7 +539,7 @@
+ {
+       struct iwl_priv *priv = file->private_data;
+       char buf[8];
+-      int buf_size;
++      size_t buf_size;
+       int ht40;
+ 
+       memset(buf, 0, sizeof(buf));
+@@ -591,7 +591,7 @@
+ {
+       struct iwl_priv *priv = file->private_data;
+       char buf[8];
+-      int buf_size;
++      size_t buf_size;
+       int value;
+ 
+       memset(buf, 0, sizeof(buf));
+@@ -683,10 +683,10 @@
+ DEBUGFS_READ_WRITE_FILE_OPS(sleep_level_override);
+ DEBUGFS_READ_FILE_OPS(current_sleep_command);
+ 
+-static const char *fmt_value = "  %-30s %10u\n";
+-static const char *fmt_hex   = "  %-30s       0x%02X\n";
+-static const char *fmt_table = "  %-30s %10u  %10u  %10u  %10u\n";
+-static const char *fmt_header =
++static const char fmt_value[] = "  %-30s %10u\n";
++static const char fmt_hex[]   = "  %-30s       0x%02X\n";
++static const char fmt_table[] = "  %-30s %10u  %10u  %10u  %10u\n";
++static const char fmt_header[] =
+       "%-32s    current  cumulative       delta         max\n";
+ 
+ static int iwl_statistics_flag(struct iwl_priv *priv, char *buf, int bufsz)
+@@ -1856,7 +1856,7 @@
+ {
+       struct iwl_priv *priv = file->private_data;
+       char buf[8];
+-      int buf_size;
++      size_t buf_size;
+       int clear;
+ 
+       memset(buf, 0, sizeof(buf));
+@@ -1901,7 +1901,7 @@
+ {
+       struct iwl_priv *priv = file->private_data;
+       char buf[8];
+-      int buf_size;
++      size_t buf_size;
+       int trace;
+ 
+       memset(buf, 0, sizeof(buf));
+@@ -1972,7 +1972,7 @@
+ {
+       struct iwl_priv *priv = file->private_data;
+       char buf[8];
+-      int buf_size;
++      size_t buf_size;
+       int missed;
+ 
+       memset(buf, 0, sizeof(buf));
+@@ -2013,7 +2013,7 @@
+ 
+       struct iwl_priv *priv = file->private_data;
+       char buf[8];
+-      int buf_size;
++      size_t buf_size;
+       int plcp;
+ 
+       memset(buf, 0, sizeof(buf));
+@@ -2073,7 +2073,7 @@
+ 
+       struct iwl_priv *priv = file->private_data;
+       char buf[8];
+-      int buf_size;
++      size_t buf_size;
+       int flush;
+ 
+       memset(buf, 0, sizeof(buf));
+@@ -2163,7 +2163,7 @@
+ 
+       struct iwl_priv *priv = file->private_data;
+       char buf[8];
+-      int buf_size;
++      size_t buf_size;
+       int rts;
+ 
+       if (!priv->cfg->ht_params)
+@@ -2204,7 +2204,7 @@
+ {
+       struct iwl_priv *priv = file->private_data;
+       char buf[8];
+-      int buf_size;
++      size_t buf_size;
+ 
+       memset(buf, 0, sizeof(buf));
+       buf_size = min(count, sizeof(buf) -  1);
+@@ -2238,7 +2238,7 @@
+       struct iwl_priv *priv = file->private_data;
+       u32 event_log_flag;
+       char buf[8];
+-      int buf_size;
++      size_t buf_size;
+ 
+       /* check that the interface is up */
+       if (!iwl_is_ready(priv))
+@@ -2292,7 +2292,7 @@
+       struct iwl_priv *priv = file->private_data;
+       char buf[8];
+       u32 calib_disabled;
+-      int buf_size;
++      size_t buf_size;
+ 
+       memset(buf, 0, sizeof(buf));
+       buf_size = min(count, sizeof(buf) - 1);
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/iwlwifi/pcie/trans.c backports-3.18.1-1/drivers/net/wireless/iwlwifi/pcie/trans.c
+--- backports-3.18.1-1.org/drivers/net/wireless/iwlwifi/pcie/trans.c   2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/iwlwifi/pcie/trans.c       2014-12-28 14:10:09.564888946 +0100
+@@ -1689,7 +1689,7 @@
+       struct isr_statistics *isr_stats = &trans_pcie->isr_stats;
+ 
+       char buf[8];
+-      int buf_size;
++      size_t buf_size;
+       u32 reset_flag;
+ 
+       memset(buf, 0, sizeof(buf));
+@@ -1710,7 +1710,7 @@
+ {
+       struct iwl_trans *trans = file->private_data;
+       char buf[8];
+-      int buf_size;
++      size_t buf_size;
+       int csr;
+ 
+       memset(buf, 0, sizeof(buf));
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/mac80211_hwsim.c backports-3.18.1-1/drivers/net/wireless/mac80211_hwsim.c
+--- backports-3.18.1-1.org/drivers/net/wireless/mac80211_hwsim.c       2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/mac80211_hwsim.c   2014-12-28 14:10:09.568888967 +0100
+@@ -2578,20 +2578,20 @@
+       if (channels < 1)
+               return -EINVAL;
+ 
+-      mac80211_hwsim_mchan_ops = mac80211_hwsim_ops;
+-      mac80211_hwsim_mchan_ops.hw_scan = mac80211_hwsim_hw_scan;
+-      mac80211_hwsim_mchan_ops.cancel_hw_scan = mac80211_hwsim_cancel_hw_scan;
+-      mac80211_hwsim_mchan_ops.sw_scan_start = NULL;
+-      mac80211_hwsim_mchan_ops.sw_scan_complete = NULL;
+-      mac80211_hwsim_mchan_ops.remain_on_channel = mac80211_hwsim_roc;
+-      mac80211_hwsim_mchan_ops.cancel_remain_on_channel = mac80211_hwsim_croc;
+-      mac80211_hwsim_mchan_ops.add_chanctx = mac80211_hwsim_add_chanctx;
+-      mac80211_hwsim_mchan_ops.remove_chanctx = mac80211_hwsim_remove_chanctx;
+-      mac80211_hwsim_mchan_ops.change_chanctx = mac80211_hwsim_change_chanctx;
+-      mac80211_hwsim_mchan_ops.assign_vif_chanctx =
+-              mac80211_hwsim_assign_vif_chanctx;
+-      mac80211_hwsim_mchan_ops.unassign_vif_chanctx =
+-              mac80211_hwsim_unassign_vif_chanctx;
++      pax_open_kernel();
++      memcpy((void *)&mac80211_hwsim_mchan_ops, &mac80211_hwsim_ops, sizeof mac80211_hwsim_mchan_ops);
++      *(void **)&mac80211_hwsim_mchan_ops.hw_scan = mac80211_hwsim_hw_scan;
++      *(void **)&mac80211_hwsim_mchan_ops.cancel_hw_scan = mac80211_hwsim_cancel_hw_scan;
++      *(void **)&mac80211_hwsim_mchan_ops.sw_scan_start = NULL;
++      *(void **)&mac80211_hwsim_mchan_ops.sw_scan_complete = NULL;
++      *(void **)&mac80211_hwsim_mchan_ops.remain_on_channel = mac80211_hwsim_roc;
++      *(void **)&mac80211_hwsim_mchan_ops.cancel_remain_on_channel = mac80211_hwsim_croc;
++      *(void **)&mac80211_hwsim_mchan_ops.add_chanctx = mac80211_hwsim_add_chanctx;
++      *(void **)&mac80211_hwsim_mchan_ops.remove_chanctx = mac80211_hwsim_remove_chanctx;
++      *(void **)&mac80211_hwsim_mchan_ops.change_chanctx = mac80211_hwsim_change_chanctx;
++      *(void **)&mac80211_hwsim_mchan_ops.assign_vif_chanctx = mac80211_hwsim_assign_vif_chanctx;
++      *(void **)&mac80211_hwsim_mchan_ops.unassign_vif_chanctx = mac80211_hwsim_unassign_vif_chanctx;
++      pax_close_kernel();
+ 
+       spin_lock_init(&hwsim_radio_lock);
+       INIT_LIST_HEAD(&hwsim_radios);
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/rndis_wlan.c backports-3.18.1-1/drivers/net/wireless/rndis_wlan.c
+--- backports-3.18.1-1.org/drivers/net/wireless/rndis_wlan.c   2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/rndis_wlan.c       2014-12-28 14:10:09.568888967 +0100
+@@ -1236,7 +1236,7 @@
+ 
+       netdev_dbg(usbdev->net, "%s(): %i\n", __func__, rts_threshold);
+ 
+-      if (rts_threshold < 0 || rts_threshold > 2347)
++      if (rts_threshold > 2347)
+               rts_threshold = 2347;
+ 
+       tmp = cpu_to_le32(rts_threshold);
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/rt2x00/rt2x00.h backports-3.18.1-1/drivers/net/wireless/rt2x00/rt2x00.h
+--- backports-3.18.1-1.org/drivers/net/wireless/rt2x00/rt2x00.h        2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/rt2x00/rt2x00.h    2014-12-28 14:10:09.568888967 +0100
+@@ -375,7 +375,7 @@
+        * for hardware which doesn't support hardware
+        * sequence counting.
+        */
+-      atomic_t seqno;
++      atomic_unchecked_t seqno;
+ };
+ 
+ static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/rt2x00/rt2x00queue.c backports-3.18.1-1/drivers/net/wireless/rt2x00/rt2x00queue.c
+--- backports-3.18.1-1.org/drivers/net/wireless/rt2x00/rt2x00queue.c   2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/rt2x00/rt2x00queue.c       2014-12-28 14:10:09.568888967 +0100
+@@ -224,9 +224,9 @@
+        * sequence counter given by mac80211.
+        */
+       if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
+-              seqno = atomic_add_return(0x10, &intf->seqno);
++              seqno = atomic_add_return_unchecked(0x10, &intf->seqno);
+       else
+-              seqno = atomic_read(&intf->seqno);
++              seqno = atomic_read_unchecked(&intf->seqno);
+ 
+       hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+       hdr->seq_ctrl |= cpu_to_le16(seqno);
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/ti/wl1251/sdio.c backports-3.18.1-1/drivers/net/wireless/ti/wl1251/sdio.c
+--- backports-3.18.1-1.org/drivers/net/wireless/ti/wl1251/sdio.c       2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/ti/wl1251/sdio.c   2014-12-28 14:10:09.568888967 +0100
+@@ -282,13 +282,17 @@
+ 
+               irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
+ 
+-              wl1251_sdio_ops.enable_irq = wl1251_enable_line_irq;
+-              wl1251_sdio_ops.disable_irq = wl1251_disable_line_irq;
++              pax_open_kernel();
++              *(void **)&wl1251_sdio_ops.enable_irq = wl1251_enable_line_irq;
++              *(void **)&wl1251_sdio_ops.disable_irq = wl1251_disable_line_irq;
++              pax_close_kernel();
+ 
+               wl1251_info("using dedicated interrupt line");
+       } else {
+-              wl1251_sdio_ops.enable_irq = wl1251_sdio_enable_irq;
+-              wl1251_sdio_ops.disable_irq = wl1251_sdio_disable_irq;
++              pax_open_kernel();
++              *(void **)&wl1251_sdio_ops.enable_irq = wl1251_sdio_enable_irq;
++              *(void **)&wl1251_sdio_ops.disable_irq = wl1251_sdio_disable_irq;
++              pax_close_kernel();
+ 
+               wl1251_info("using SDIO interrupt");
+       }
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/ti/wl12xx/main.c backports-3.18.1-1/drivers/net/wireless/ti/wl12xx/main.c
+--- backports-3.18.1-1.org/drivers/net/wireless/ti/wl12xx/main.c       2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/ti/wl12xx/main.c   2014-12-28 14:10:09.568888967 +0100
+@@ -656,7 +656,9 @@
+                      sizeof(wl->conf.mem));
+ 
+               /* read data preparation is only needed by wl127x */
+-              wl->ops->prepare_read = wl127x_prepare_read;
++              pax_open_kernel();
++              *(void **)&wl->ops->prepare_read = wl127x_prepare_read;
++              pax_close_kernel();
+ 
+               wlcore_set_min_fw_ver(wl, WL127X_CHIP_VER,
+                             WL127X_IFTYPE_SR_VER,  WL127X_MAJOR_SR_VER,
+@@ -681,7 +683,9 @@
+                      sizeof(wl->conf.mem));
+ 
+               /* read data preparation is only needed by wl127x */
+-              wl->ops->prepare_read = wl127x_prepare_read;
++              pax_open_kernel();
++              *(void **)&wl->ops->prepare_read = wl127x_prepare_read;
++              pax_close_kernel();
+ 
+               wlcore_set_min_fw_ver(wl, WL127X_CHIP_VER,
+                             WL127X_IFTYPE_SR_VER,  WL127X_MAJOR_SR_VER,
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/ti/wl18xx/main.c backports-3.18.1-1/drivers/net/wireless/ti/wl18xx/main.c
+--- backports-3.18.1-1.org/drivers/net/wireless/ti/wl18xx/main.c       2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/ti/wl18xx/main.c   2014-12-28 14:10:09.568888967 +0100
+@@ -1916,8 +1916,10 @@
+       }
+ 
+       if (!checksum_param) {
+-              wl18xx_ops.set_rx_csum = NULL;
+-              wl18xx_ops.init_vif = NULL;
++              pax_open_kernel();
++              *(void **)&wl18xx_ops.set_rx_csum = NULL;
++              *(void **)&wl18xx_ops.init_vif = NULL;
++              pax_close_kernel();
+       }
+ 
+       /* Enable 11a Band only if we have 5G antennas */
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/zd1211rw/zd_usb.c backports-3.18.1-1/drivers/net/wireless/zd1211rw/zd_usb.c
+--- backports-3.18.1-1.org/drivers/net/wireless/zd1211rw/zd_usb.c      2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/zd1211rw/zd_usb.c  2014-12-28 14:10:09.568888967 +0100
+@@ -385,7 +385,7 @@
+ {
+       struct zd_usb *usb = urb->context;
+       struct zd_usb_interrupt *intr = &usb->intr;
+-      int len;
++      unsigned int len;
+       u16 int_num;
+ 
+       ZD_ASSERT(in_interrupt());
+diff -Naur backports-3.18.1-1.org/drivers/nfc/nfcwilink.c backports-3.18.1-1/drivers/nfc/nfcwilink.c
+--- backports-3.18.1-1.org/drivers/nfc/nfcwilink.c     2014-12-21 22:37:14.000000000 +0100
++++ backports-3.18.1-1/drivers/nfc/nfcwilink.c 2014-12-28 14:10:09.568888967 +0100
+@@ -497,7 +497,7 @@
+ 
+ static int nfcwilink_probe(struct platform_device *pdev)
+ {
+-      static struct nfcwilink *drv;
++      struct nfcwilink *drv;
+       int rc;
+       __u32 protocols;
+ 
+diff -Naur backports-3.18.1-1.org/include/linux/gracl_compat.h backports-3.18.1-1/include/linux/gracl_compat.h
+--- backports-3.18.1-1.org/include/linux/gracl_compat.h        1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/include/linux/gracl_compat.h    2014-12-28 14:10:09.684889542 +0100
+@@ -0,0 +1,156 @@
++#ifndef GR_ACL_COMPAT_H
++#define GR_ACL_COMPAT_H
++
++#include <linux/resource.h>
++#include <asm/resource.h>
++
++struct sprole_pw_compat {
++      compat_uptr_t rolename;
++      unsigned char salt[GR_SALT_LEN];
++      unsigned char sum[GR_SHA_LEN];
++};
++
++struct gr_hash_struct_compat {
++      compat_uptr_t table;
++      compat_uptr_t nametable;
++      compat_uptr_t first;
++      __u32 table_size;
++      __u32 used_size;
++      int type;
++};
++
++struct acl_subject_label_compat {
++      compat_uptr_t filename;
++      compat_ino_t inode;
++      __u32 device;
++      __u32 mode;
++      kernel_cap_t cap_mask;
++      kernel_cap_t cap_lower;
++      kernel_cap_t cap_invert_audit;
++
++      struct compat_rlimit res[GR_NLIMITS];
++      __u32 resmask;
++
++      __u8 user_trans_type;
++      __u8 group_trans_type;
++      compat_uptr_t user_transitions;
++      compat_uptr_t group_transitions;
++      __u16 user_trans_num;
++      __u16 group_trans_num;
++
++      __u32 sock_families[2];
++      __u32 ip_proto[8];
++      __u32 ip_type;
++      compat_uptr_t ips;
++      __u32 ip_num;
++      __u32 inaddr_any_override;
++
++      __u32 crashes;
++      compat_ulong_t expires;
++
++      compat_uptr_t parent_subject;
++      compat_uptr_t hash;
++      compat_uptr_t prev;
++      compat_uptr_t next;
++
++      compat_uptr_t obj_hash;
++      __u32 obj_hash_size;
++      __u16 pax_flags;
++};
++
++struct role_allowed_ip_compat {
++      __u32 addr;
++      __u32 netmask;
++
++      compat_uptr_t prev;
++      compat_uptr_t next;
++};
++
++struct role_transition_compat {
++      compat_uptr_t rolename;
++
++      compat_uptr_t prev;
++      compat_uptr_t next;
++};
++
++struct acl_role_label_compat {
++      compat_uptr_t rolename;
++      uid_t uidgid;
++      __u16 roletype;
++
++      __u16 auth_attempts;
++      compat_ulong_t expires;
++
++      compat_uptr_t root_label;
++      compat_uptr_t hash;
++
++      compat_uptr_t prev;
++      compat_uptr_t next;
++
++      compat_uptr_t transitions;
++      compat_uptr_t allowed_ips;
++      compat_uptr_t domain_children;
++      __u16 domain_child_num;
++
++      umode_t umask;
++
++      compat_uptr_t subj_hash;
++      __u32 subj_hash_size;
++};
++
++struct user_acl_role_db_compat {
++      compat_uptr_t r_table;
++      __u32 num_pointers;
++      __u32 num_roles;
++      __u32 num_domain_children;
++      __u32 num_subjects;
++      __u32 num_objects;
++};
++
++struct acl_object_label_compat {
++      compat_uptr_t filename;
++      compat_ino_t inode;
++      __u32 device;
++      __u32 mode;
++
++      compat_uptr_t nested;
++      compat_uptr_t globbed;
++
++      compat_uptr_t prev;
++      compat_uptr_t next;
++};
++
++struct acl_ip_label_compat {
++      compat_uptr_t iface;
++      __u32 addr;
++      __u32 netmask;
++      __u16 low, high;
++      __u8 mode;
++      __u32 type;
++      __u32 proto[8];
++
++      compat_uptr_t prev;
++      compat_uptr_t next;
++};
++
++struct gr_arg_compat {
++      struct user_acl_role_db_compat role_db;
++      unsigned char pw[GR_PW_LEN];
++      unsigned char salt[GR_SALT_LEN];
++      unsigned char sum[GR_SHA_LEN];
++      unsigned char sp_role[GR_SPROLE_LEN];
++      compat_uptr_t sprole_pws;
++      __u32 segv_device;
++      compat_ino_t segv_inode;
++      uid_t segv_uid;
++      __u16 num_sprole_pws;
++      __u16 mode;
++};
++
++struct gr_arg_wrapper_compat {
++      compat_uptr_t arg;
++      __u32 version;
++      __u32 size;
++};
++
++#endif
+diff -Naur backports-3.18.1-1.org/include/linux/gracl.h backports-3.18.1-1/include/linux/gracl.h
+--- backports-3.18.1-1.org/include/linux/gracl.h       1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/include/linux/gracl.h   2014-12-28 14:10:09.684889542 +0100
+@@ -0,0 +1,340 @@
++#ifndef GR_ACL_H
++#define GR_ACL_H
++
++#include <linux/grdefs.h>
++#include <linux/resource.h>
++#include <linux/capability.h>
++#include <linux/dcache.h>
++#include <asm/resource.h>
++
++/* Major status information */
++
++#define GR_VERSION  "grsecurity 3.0"
++#define GRSECURITY_VERSION 0x3000
++
++enum {
++      GR_SHUTDOWN = 0,
++      GR_ENABLE = 1,
++      GR_SPROLE = 2,
++      GR_OLDRELOAD = 3,
++      GR_SEGVMOD = 4,
++      GR_STATUS = 5,
++      GR_UNSPROLE = 6,
++      GR_PASSSET = 7,
++      GR_SPROLEPAM = 8,
++      GR_RELOAD = 9,
++};
++
++/* Password setup definitions
++ * kernel/grhash.c */
++enum {
++      GR_PW_LEN = 128,
++      GR_SALT_LEN = 16,
++      GR_SHA_LEN = 32,
++};
++
++enum {
++      GR_SPROLE_LEN = 64,
++};
++
++enum {
++      GR_NO_GLOB = 0,
++      GR_REG_GLOB,
++      GR_CREATE_GLOB
++};
++
++#define GR_NLIMITS 32
++
++/* Begin Data Structures */
++
++struct sprole_pw {
++      unsigned char *rolename;
++      unsigned char salt[GR_SALT_LEN];
++      unsigned char sum[GR_SHA_LEN];  /* 256-bit SHA hash of the password */
++};
++
++struct name_entry {
++      __u32 key;
++      ino_t inode;
++      dev_t device;
++      char *name;
++      __u16 len;
++      __u8 deleted;
++      struct name_entry *prev;
++      struct name_entry *next;
++};
++
++struct inodev_entry {
++      struct name_entry *nentry;
++      struct inodev_entry *prev;
++      struct inodev_entry *next;
++};
++
++struct acl_role_db {
++      struct acl_role_label **r_hash;
++      __u32 r_size;
++};
++
++struct inodev_db {
++      struct inodev_entry **i_hash;
++      __u32 i_size;
++};
++
++struct name_db {
++      struct name_entry **n_hash;
++      __u32 n_size;
++};
++
++struct crash_uid {
++      uid_t uid;
++      unsigned long expires;
++};
++
++struct gr_hash_struct {
++      void **table;
++      void **nametable;
++      void *first;
++      __u32 table_size;
++      __u32 used_size;
++      int type;
++};
++
++/* Userspace Grsecurity ACL data structures */
++
++struct acl_subject_label {
++      char *filename;
++      ino_t inode;
++      dev_t device;
++      __u32 mode;
++      kernel_cap_t cap_mask;
++      kernel_cap_t cap_lower;
++      kernel_cap_t cap_invert_audit;
++
++      struct rlimit res[GR_NLIMITS];
++      __u32 resmask;
++
++      __u8 user_trans_type;
++      __u8 group_trans_type;
++      uid_t *user_transitions;
++      gid_t *group_transitions;
++      __u16 user_trans_num;
++      __u16 group_trans_num;
++
++      __u32 sock_families[2];
++      __u32 ip_proto[8];
++      __u32 ip_type;
++      struct acl_ip_label **ips;
++      __u32 ip_num;
++      __u32 inaddr_any_override;
++
++      __u32 crashes;
++      unsigned long expires;
++
++      struct acl_subject_label *parent_subject;
++      struct gr_hash_struct *hash;
++      struct acl_subject_label *prev;
++      struct acl_subject_label *next;
++
++      struct acl_object_label **obj_hash;
++      __u32 obj_hash_size;
++      __u16 pax_flags;
++};
++
++struct role_allowed_ip {
++      __u32 addr;
++      __u32 netmask;
++
++      struct role_allowed_ip *prev;
++      struct role_allowed_ip *next;
++};
++
++struct role_transition {
++      char *rolename;
++
++      struct role_transition *prev;
++      struct role_transition *next;
++};
++
++struct acl_role_label {
++      char *rolename;
++      uid_t uidgid;
++      __u16 roletype;
++
++      __u16 auth_attempts;
++      unsigned long expires;
++
++      struct acl_subject_label *root_label;
++      struct gr_hash_struct *hash;
++
++      struct acl_role_label *prev;
++      struct acl_role_label *next;
++
++      struct role_transition *transitions;
++      struct role_allowed_ip *allowed_ips;
++      uid_t *domain_children;
++      __u16 domain_child_num;
++
++      umode_t umask;
++
++      struct acl_subject_label **subj_hash;
++      __u32 subj_hash_size;
++};
++
++struct user_acl_role_db {
++      struct acl_role_label **r_table;
++      __u32 num_pointers;             /* Number of allocations to track */
++      __u32 num_roles;                /* Number of roles */
++      __u32 num_domain_children;      /* Number of domain children */
++      __u32 num_subjects;             /* Number of subjects */
++      __u32 num_objects;              /* Number of objects */
++};
++
++struct acl_object_label {
++      char *filename;
++      ino_t inode;
++      dev_t device;
++      __u32 mode;
++
++      struct acl_subject_label *nested;
++      struct acl_object_label *globbed;
++
++      /* next two structures not used */
++
++      struct acl_object_label *prev;
++      struct acl_object_label *next;
++};
++
++struct acl_ip_label {
++      char *iface;
++      __u32 addr;
++      __u32 netmask;
++      __u16 low, high;
++      __u8 mode;
++      __u32 type;
++      __u32 proto[8];
++
++      /* next two structures not used */
++
++      struct acl_ip_label *prev;
++      struct acl_ip_label *next;
++};
++
++struct gr_arg {
++      struct user_acl_role_db role_db;
++      unsigned char pw[GR_PW_LEN];
++      unsigned char salt[GR_SALT_LEN];
++      unsigned char sum[GR_SHA_LEN];
++      unsigned char sp_role[GR_SPROLE_LEN];
++      struct sprole_pw *sprole_pws;
++      dev_t segv_device;
++      ino_t segv_inode;
++      uid_t segv_uid;
++      __u16 num_sprole_pws;
++      __u16 mode;
++};
++
++struct gr_arg_wrapper {
++      struct gr_arg *arg;
++      __u32 version;
++      __u32 size;
++};
++
++struct subject_map {
++      struct acl_subject_label *user;
++      struct acl_subject_label *kernel;
++      struct subject_map *prev;
++      struct subject_map *next;
++};
++
++struct acl_subj_map_db {
++      struct subject_map **s_hash;
++      __u32 s_size;
++};
++
++struct gr_policy_state {
++      struct sprole_pw **acl_special_roles;
++      __u16 num_sprole_pws;
++      struct acl_role_label *kernel_role;
++      struct acl_role_label *role_list;
++      struct acl_role_label *default_role;
++      struct acl_role_db acl_role_set;
++      struct acl_subj_map_db subj_map_set;
++      struct name_db name_set;
++      struct inodev_db inodev_set;
++};
++
++struct gr_alloc_state {
++      unsigned long alloc_stack_next;
++      unsigned long alloc_stack_size;
++      void **alloc_stack;
++};
++
++struct gr_reload_state {
++      struct gr_policy_state oldpolicy;
++      struct gr_alloc_state oldalloc;
++      struct gr_policy_state newpolicy;
++      struct gr_alloc_state newalloc;
++      struct gr_policy_state *oldpolicy_ptr;
++      struct gr_alloc_state *oldalloc_ptr;
++      unsigned char oldmode;
++};
++
++/* End Data Structures Section */
++
++/* Hash functions generated by empirical testing by Brad Spengler
++   Makes good use of the low bits of the inode.  Generally 0-1 times
++   in loop for successful match.  0-3 for unsuccessful match.
++   Shift/add algorithm with modulus of table size and an XOR*/
++
++static __inline__ unsigned int
++gr_rhash(const uid_t uid, const __u16 type, const unsigned int sz)
++{
++      return ((((uid + type) << (16 + type)) ^ uid) % sz);
++}
++
++ static __inline__ unsigned int
++gr_shash(const struct acl_subject_label *userp, const unsigned int sz)
++{
++      return ((const unsigned long)userp % sz);
++}
++
++static __inline__ unsigned int
++gr_fhash(const ino_t ino, const dev_t dev, const unsigned int sz)
++{
++      return (((ino + dev) ^ ((ino << 13) + (ino << 23) + (dev << 9))) % sz);
++}
++
++static __inline__ unsigned int
++gr_nhash(const char *name, const __u16 len, const unsigned int sz)
++{
++      return full_name_hash((const unsigned char *)name, len) % sz;
++}
++
++#define FOR_EACH_SUBJECT_START(role,subj,iter) \
++      subj = NULL; \
++      iter = 0; \
++      while (iter < role->subj_hash_size) { \
++              if (subj == NULL) \
++                      subj = role->subj_hash[iter]; \
++              if (subj == NULL) { \
++                      iter++; \
++                      continue; \
++              }
++
++#define FOR_EACH_SUBJECT_END(subj,iter) \
++              subj = subj->next; \
++              if (subj == NULL) \
++                      iter++; \
++      }
++
++
++#define FOR_EACH_NESTED_SUBJECT_START(role,subj) \
++      subj = role->hash->first; \
++      while (subj != NULL) {
++
++#define FOR_EACH_NESTED_SUBJECT_END(subj) \
++              subj = subj->next; \
++      }
++
++#endif
++
+diff -Naur backports-3.18.1-1.org/include/linux/gralloc.h backports-3.18.1-1/include/linux/gralloc.h
+--- backports-3.18.1-1.org/include/linux/gralloc.h     1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/include/linux/gralloc.h 2014-12-28 14:10:09.684889542 +0100
+@@ -0,0 +1,9 @@
++#ifndef __GRALLOC_H
++#define __GRALLOC_H
++
++void acl_free_all(void);
++int acl_alloc_stack_init(unsigned long size);
++void *acl_alloc(unsigned long len);
++void *acl_alloc_num(unsigned long num, unsigned long len);
++
++#endif
+diff -Naur backports-3.18.1-1.org/include/linux/grdefs.h backports-3.18.1-1/include/linux/grdefs.h
+--- backports-3.18.1-1.org/include/linux/grdefs.h      1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/include/linux/grdefs.h  2014-12-28 14:10:09.688889562 +0100
+@@ -0,0 +1,140 @@
++#ifndef GRDEFS_H
++#define GRDEFS_H
++
++/* Begin grsecurity status declarations */
++
++enum {
++      GR_READY = 0x01,
++      GR_STATUS_INIT = 0x00   // disabled state
++};
++
++/* Begin  ACL declarations */
++
++/* Role flags */
++
++enum {
++      GR_ROLE_USER = 0x0001,
++      GR_ROLE_GROUP = 0x0002,
++      GR_ROLE_DEFAULT = 0x0004,
++      GR_ROLE_SPECIAL = 0x0008,
++      GR_ROLE_AUTH = 0x0010,
++      GR_ROLE_NOPW = 0x0020,
++      GR_ROLE_GOD = 0x0040,
++      GR_ROLE_LEARN = 0x0080,
++      GR_ROLE_TPE = 0x0100,
++      GR_ROLE_DOMAIN = 0x0200,
++      GR_ROLE_PAM = 0x0400,
++      GR_ROLE_PERSIST = 0x0800
++};
++
++/* ACL Subject and Object mode flags */
++enum {
++      GR_DELETED = 0x80000000
++};
++
++/* ACL Object-only mode flags */
++enum {
++      GR_READ         = 0x00000001,
++      GR_APPEND       = 0x00000002,
++      GR_WRITE        = 0x00000004,
++      GR_EXEC         = 0x00000008,
++      GR_FIND         = 0x00000010,
++      GR_INHERIT      = 0x00000020,
++      GR_SETID        = 0x00000040,
++      GR_CREATE       = 0x00000080,
++      GR_DELETE       = 0x00000100,
++      GR_LINK         = 0x00000200,
++      GR_AUDIT_READ   = 0x00000400,
++      GR_AUDIT_APPEND = 0x00000800,
++      GR_AUDIT_WRITE  = 0x00001000,
++      GR_AUDIT_EXEC   = 0x00002000,
++      GR_AUDIT_FIND   = 0x00004000,
++      GR_AUDIT_INHERIT= 0x00008000,
++      GR_AUDIT_SETID  = 0x00010000,
++      GR_AUDIT_CREATE = 0x00020000,
++      GR_AUDIT_DELETE = 0x00040000,
++      GR_AUDIT_LINK   = 0x00080000,
++      GR_PTRACERD     = 0x00100000,
++      GR_NOPTRACE     = 0x00200000,
++      GR_SUPPRESS     = 0x00400000,
++      GR_NOLEARN      = 0x00800000,
++      GR_INIT_TRANSFER= 0x01000000
++};
++
++#define GR_AUDITS (GR_AUDIT_READ | GR_AUDIT_WRITE | GR_AUDIT_APPEND | GR_AUDIT_EXEC | \
++                 GR_AUDIT_FIND | GR_AUDIT_INHERIT | GR_AUDIT_SETID | \
++                 GR_AUDIT_CREATE | GR_AUDIT_DELETE | GR_AUDIT_LINK)
++
++/* ACL subject-only mode flags */
++enum {
++      GR_KILL         = 0x00000001,
++      GR_VIEW         = 0x00000002,
++      GR_PROTECTED    = 0x00000004,
++      GR_LEARN        = 0x00000008,
++      GR_OVERRIDE     = 0x00000010,
++      /* just a placeholder, this mode is only used in userspace */
++      GR_DUMMY        = 0x00000020,
++      GR_PROTSHM      = 0x00000040,
++      GR_KILLPROC     = 0x00000080,
++      GR_KILLIPPROC   = 0x00000100,
++      /* just a placeholder, this mode is only used in userspace */
++      GR_NOTROJAN     = 0x00000200,
++      GR_PROTPROCFD   = 0x00000400,
++      GR_PROCACCT     = 0x00000800,
++      GR_RELAXPTRACE  = 0x00001000,
++      //GR_NESTED     = 0x00002000,
++      GR_INHERITLEARN = 0x00004000,
++      GR_PROCFIND     = 0x00008000,
++      GR_POVERRIDE    = 0x00010000,
++      GR_KERNELAUTH   = 0x00020000,
++      GR_ATSECURE     = 0x00040000,
++      GR_SHMEXEC      = 0x00080000
++};
++
++enum {
++      GR_PAX_ENABLE_SEGMEXEC  = 0x0001,
++      GR_PAX_ENABLE_PAGEEXEC  = 0x0002,
++      GR_PAX_ENABLE_MPROTECT  = 0x0004,
++      GR_PAX_ENABLE_RANDMMAP  = 0x0008,
++      GR_PAX_ENABLE_EMUTRAMP  = 0x0010,
++      GR_PAX_DISABLE_SEGMEXEC = 0x0100,
++      GR_PAX_DISABLE_PAGEEXEC = 0x0200,
++      GR_PAX_DISABLE_MPROTECT = 0x0400,
++      GR_PAX_DISABLE_RANDMMAP = 0x0800,
++      GR_PAX_DISABLE_EMUTRAMP = 0x1000,
++};
++
++enum {
++      GR_ID_USER      = 0x01,
++      GR_ID_GROUP     = 0x02,
++};
++
++enum {
++      GR_ID_ALLOW     = 0x01,
++      GR_ID_DENY      = 0x02,
++};
++
++#define GR_CRASH_RES  31
++#define GR_UIDTABLE_MAX 500
++
++/* begin resource learning section */
++enum {
++      GR_RLIM_CPU_BUMP = 60,
++      GR_RLIM_FSIZE_BUMP = 50000,
++      GR_RLIM_DATA_BUMP = 10000,
++      GR_RLIM_STACK_BUMP = 1000,
++      GR_RLIM_CORE_BUMP = 10000,
++      GR_RLIM_RSS_BUMP = 500000,
++      GR_RLIM_NPROC_BUMP = 1,
++      GR_RLIM_NOFILE_BUMP = 5,
++      GR_RLIM_MEMLOCK_BUMP = 50000,
++      GR_RLIM_AS_BUMP = 500000,
++      GR_RLIM_LOCKS_BUMP = 2,
++      GR_RLIM_SIGPENDING_BUMP = 5,
++      GR_RLIM_MSGQUEUE_BUMP = 10000,
++      GR_RLIM_NICE_BUMP = 1,
++      GR_RLIM_RTPRIO_BUMP = 1,
++      GR_RLIM_RTTIME_BUMP = 1000000
++};
++
++#endif
+diff -Naur backports-3.18.1-1.org/include/linux/grinternal.h backports-3.18.1-1/include/linux/grinternal.h
+--- backports-3.18.1-1.org/include/linux/grinternal.h  1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/include/linux/grinternal.h      2014-12-28 14:10:09.688889562 +0100
+@@ -0,0 +1,229 @@
++#ifndef __GRINTERNAL_H
++#define __GRINTERNAL_H
++
++#ifdef CONFIG_GRKERNSEC
++
++#include <linux/fs.h>
++#include <linux/mnt_namespace.h>
++#include <linux/nsproxy.h>
++#include <linux/gracl.h>
++#include <linux/grdefs.h>
++#include <linux/grmsg.h>
++
++void gr_add_learn_entry(const char *fmt, ...)
++      __attribute__ ((format (printf, 1, 2)));
++__u32 gr_search_file(const struct dentry *dentry, const __u32 mode,
++                          const struct vfsmount *mnt);
++__u32 gr_check_create(const struct dentry *new_dentry,
++                           const struct dentry *parent,
++                           const struct vfsmount *mnt, const __u32 mode);
++int gr_check_protected_task(const struct task_struct *task);
++__u32 to_gr_audit(const __u32 reqmode);
++int gr_set_acls(const int type);
++int gr_acl_is_enabled(void);
++char gr_roletype_to_char(void);
++
++void gr_handle_alertkill(struct task_struct *task);
++char *gr_to_filename(const struct dentry *dentry,
++                          const struct vfsmount *mnt);
++char *gr_to_filename1(const struct dentry *dentry,
++                          const struct vfsmount *mnt);
++char *gr_to_filename2(const struct dentry *dentry,
++                          const struct vfsmount *mnt);
++char *gr_to_filename3(const struct dentry *dentry,
++                          const struct vfsmount *mnt);
++
++extern int grsec_enable_ptrace_readexec;
++extern int grsec_enable_harden_ptrace;
++extern int grsec_enable_link;
++extern int grsec_enable_fifo;
++extern int grsec_enable_execve;
++extern int grsec_enable_shm;
++extern int grsec_enable_execlog;
++extern int grsec_enable_signal;
++extern int grsec_enable_audit_ptrace;
++extern int grsec_enable_forkfail;
++extern int grsec_enable_time;
++extern int grsec_enable_rofs;
++extern int grsec_deny_new_usb;
++extern int grsec_enable_chroot_shmat;
++extern int grsec_enable_chroot_mount;
++extern int grsec_enable_chroot_double;
++extern int grsec_enable_chroot_pivot;
++extern int grsec_enable_chroot_chdir;
++extern int grsec_enable_chroot_chmod;
++extern int grsec_enable_chroot_mknod;
++extern int grsec_enable_chroot_fchdir;
++extern int grsec_enable_chroot_nice;
++extern int grsec_enable_chroot_execlog;
++extern int grsec_enable_chroot_caps;
++extern int grsec_enable_chroot_sysctl;
++extern int grsec_enable_chroot_unix;
++extern int grsec_enable_symlinkown;
++extern kgid_t grsec_symlinkown_gid;
++extern int grsec_enable_tpe;
++extern kgid_t grsec_tpe_gid;
++extern int grsec_enable_tpe_all;
++extern int grsec_enable_tpe_invert;
++extern int grsec_enable_socket_all;
++extern kgid_t grsec_socket_all_gid;
++extern int grsec_enable_socket_client;
++extern kgid_t grsec_socket_client_gid;
++extern int grsec_enable_socket_server;
++extern kgid_t grsec_socket_server_gid;
++extern kgid_t grsec_audit_gid;
++extern int grsec_enable_group;
++extern int grsec_enable_log_rwxmaps;
++extern int grsec_enable_mount;
++extern int grsec_enable_chdir;
++extern int grsec_resource_logging;
++extern int grsec_enable_blackhole;
++extern int grsec_lastack_retries;
++extern int grsec_enable_brute;
++extern int grsec_enable_harden_ipc;
++extern int grsec_lock;
++
++extern spinlock_t grsec_alert_lock;
++extern unsigned long grsec_alert_wtime;
++extern unsigned long grsec_alert_fyet;
++
++extern spinlock_t grsec_audit_lock;
++
++extern rwlock_t grsec_exec_file_lock;
++
++#define gr_task_fullpath(tsk) ((tsk)->exec_file ? \
++                      gr_to_filename2((tsk)->exec_file->f_path.dentry, \
++                      (tsk)->exec_file->f_path.mnt) : "/")
++
++#define gr_parent_task_fullpath(tsk) ((tsk)->real_parent->exec_file ? \
++                      gr_to_filename3((tsk)->real_parent->exec_file->f_path.dentry, \
++                      (tsk)->real_parent->exec_file->f_path.mnt) : "/")
++
++#define gr_task_fullpath0(tsk) ((tsk)->exec_file ? \
++                      gr_to_filename((tsk)->exec_file->f_path.dentry, \
++                      (tsk)->exec_file->f_path.mnt) : "/")
++
++#define gr_parent_task_fullpath0(tsk) ((tsk)->real_parent->exec_file ? \
++                      gr_to_filename1((tsk)->real_parent->exec_file->f_path.dentry, \
++                      (tsk)->real_parent->exec_file->f_path.mnt) : "/")
++
++#define proc_is_chrooted(tsk_a)  ((tsk_a)->gr_is_chrooted)
++
++#define have_same_root(tsk_a,tsk_b) ((tsk_a)->gr_chroot_dentry == (tsk_b)->gr_chroot_dentry)
++
++static inline bool gr_is_same_file(const struct file *file1, const struct file *file2)
++{
++      if (file1 && file2) {
++              const struct inode *inode1 = file1->f_path.dentry->d_inode;
++              const struct inode *inode2 = file2->f_path.dentry->d_inode;
++              if (inode1->i_ino == inode2->i_ino && inode1->i_sb->s_dev == inode2->i_sb->s_dev)
++                      return true;
++      }
++
++      return false;
++}
++
++#define GR_CHROOT_CAPS {{ \
++      CAP_TO_MASK(CAP_LINUX_IMMUTABLE) | CAP_TO_MASK(CAP_NET_ADMIN) | \
++      CAP_TO_MASK(CAP_SYS_MODULE) | CAP_TO_MASK(CAP_SYS_RAWIO) | \
++      CAP_TO_MASK(CAP_SYS_PACCT) | CAP_TO_MASK(CAP_SYS_ADMIN) | \
++      CAP_TO_MASK(CAP_SYS_BOOT) | CAP_TO_MASK(CAP_SYS_TIME) | \
++      CAP_TO_MASK(CAP_NET_RAW) | CAP_TO_MASK(CAP_SYS_TTY_CONFIG) | \
++      CAP_TO_MASK(CAP_IPC_OWNER) | CAP_TO_MASK(CAP_SETFCAP), \
++      CAP_TO_MASK(CAP_SYSLOG) | CAP_TO_MASK(CAP_MAC_ADMIN) }}
++
++#define security_learn(normal_msg,args...) \
++({ \
++      read_lock(&grsec_exec_file_lock); \
++      gr_add_learn_entry(normal_msg "\n", ## args); \
++      read_unlock(&grsec_exec_file_lock); \
++})
++
++enum {
++      GR_DO_AUDIT,
++      GR_DONT_AUDIT,
++      /* used for non-audit messages that we shouldn't kill the task on */
++      GR_DONT_AUDIT_GOOD
++};
++
++enum {
++      GR_TTYSNIFF,
++      GR_RBAC,
++      GR_RBAC_STR,
++      GR_STR_RBAC,
++      GR_RBAC_MODE2,
++      GR_RBAC_MODE3,
++      GR_FILENAME,
++      GR_SYSCTL_HIDDEN,
++      GR_NOARGS,
++      GR_ONE_INT,
++      GR_ONE_INT_TWO_STR,
++      GR_ONE_STR,
++      GR_STR_INT,
++      GR_TWO_STR_INT,
++      GR_TWO_INT,
++      GR_TWO_U64,
++      GR_THREE_INT,
++      GR_FIVE_INT_TWO_STR,
++      GR_TWO_STR,
++      GR_THREE_STR,
++      GR_FOUR_STR,
++      GR_STR_FILENAME,
++      GR_FILENAME_STR,
++      GR_FILENAME_TWO_INT,
++      GR_FILENAME_TWO_INT_STR,
++      GR_TEXTREL,
++      GR_PTRACE,
++      GR_RESOURCE,
++      GR_CAP,
++      GR_SIG,
++      GR_SIG2,
++      GR_CRASH1,
++      GR_CRASH2,
++      GR_PSACCT,
++      GR_RWXMAP,
++      GR_RWXMAPVMA
++};
++
++#define gr_log_hidden_sysctl(audit, msg, str) gr_log_varargs(audit, msg, GR_SYSCTL_HIDDEN, str)
++#define gr_log_ttysniff(audit, msg, task) gr_log_varargs(audit, msg, GR_TTYSNIFF, task)
++#define gr_log_fs_rbac_generic(audit, msg, dentry, mnt) gr_log_varargs(audit, msg, GR_RBAC, dentry, mnt)
++#define gr_log_fs_rbac_str(audit, msg, dentry, mnt, str) gr_log_varargs(audit, msg, GR_RBAC_STR, dentry, mnt, str)
++#define gr_log_fs_str_rbac(audit, msg, str, dentry, mnt) gr_log_varargs(audit, msg, GR_STR_RBAC, str, dentry, mnt)
++#define gr_log_fs_rbac_mode2(audit, msg, dentry, mnt, str1, str2) gr_log_varargs(audit, msg, GR_RBAC_MODE2, dentry, mnt, str1, str2)
++#define gr_log_fs_rbac_mode3(audit, msg, dentry, mnt, str1, str2, str3) gr_log_varargs(audit, msg, GR_RBAC_MODE3, dentry, mnt, str1, str2, str3)
++#define gr_log_fs_generic(audit, msg, dentry, mnt) gr_log_varargs(audit, msg, GR_FILENAME, dentry, mnt)
++#define gr_log_noargs(audit, msg) gr_log_varargs(audit, msg, GR_NOARGS)
++#define gr_log_int(audit, msg, num) gr_log_varargs(audit, msg, GR_ONE_INT, num)
++#define gr_log_int_str2(audit, msg, num, str1, str2) gr_log_varargs(audit, msg, GR_ONE_INT_TWO_STR, num, str1, str2)
++#define gr_log_str(audit, msg, str) gr_log_varargs(audit, msg, GR_ONE_STR, str)
++#define gr_log_str_int(audit, msg, str, num) gr_log_varargs(audit, msg, GR_STR_INT, str, num)
++#define gr_log_int_int(audit, msg, num1, num2) gr_log_varargs(audit, msg, GR_TWO_INT, num1, num2)
++#define gr_log_two_u64(audit, msg, num1, num2) gr_log_varargs(audit, msg, GR_TWO_U64, num1, num2)
++#define gr_log_int3(audit, msg, num1, num2, num3) gr_log_varargs(audit, msg, GR_THREE_INT, num1, num2, num3)
++#define gr_log_int5_str2(audit, msg, num1, num2, str1, str2) gr_log_varargs(audit, msg, GR_FIVE_INT_TWO_STR, num1, num2, str1, str2)
++#define gr_log_str_str(audit, msg, str1, str2) gr_log_varargs(audit, msg, GR_TWO_STR, str1, str2)
++#define gr_log_str2_int(audit, msg, str1, str2, num) gr_log_varargs(audit, msg, GR_TWO_STR_INT, str1, str2, num)
++#define gr_log_str3(audit, msg, str1, str2, str3) gr_log_varargs(audit, msg, GR_THREE_STR, str1, str2, str3)
++#define gr_log_str4(audit, msg, str1, str2, str3, str4) gr_log_varargs(audit, msg, GR_FOUR_STR, str1, str2, str3, str4)
++#define gr_log_str_fs(audit, msg, str, dentry, mnt) gr_log_varargs(audit, msg, GR_STR_FILENAME, str, dentry, mnt)
++#define gr_log_fs_str(audit, msg, dentry, mnt, str) gr_log_varargs(audit, msg, GR_FILENAME_STR, dentry, mnt, str)
++#define gr_log_fs_int2(audit, msg, dentry, mnt, num1, num2) gr_log_varargs(audit, msg, GR_FILENAME_TWO_INT, dentry, mnt, num1, num2)
++#define gr_log_fs_int2_str(audit, msg, dentry, mnt, num1, num2, str) gr_log_varargs(audit, msg, GR_FILENAME_TWO_INT_STR, dentry, mnt, num1, num2, str)
++#define gr_log_textrel_ulong_ulong(audit, msg, file, ulong1, ulong2) gr_log_varargs(audit, msg, GR_TEXTREL, file, ulong1, ulong2)
++#define gr_log_ptrace(audit, msg, task) gr_log_varargs(audit, msg, GR_PTRACE, task)
++#define gr_log_res_ulong2_str(audit, msg, task, ulong1, str, ulong2) gr_log_varargs(audit, msg, GR_RESOURCE, task, ulong1, str, ulong2)
++#define gr_log_cap(audit, msg, task, str) gr_log_varargs(audit, msg, GR_CAP, task, str)
++#define gr_log_sig_addr(audit, msg, str, addr) gr_log_varargs(audit, msg, GR_SIG, str, addr)
++#define gr_log_sig_task(audit, msg, task, num) gr_log_varargs(audit, msg, GR_SIG2, task, num)
++#define gr_log_crash1(audit, msg, task, ulong) gr_log_varargs(audit, msg, GR_CRASH1, task, ulong)
++#define gr_log_crash2(audit, msg, task, ulong1) gr_log_varargs(audit, msg, GR_CRASH2, task, ulong1)
++#define gr_log_procacct(audit, msg, task, num1, num2, num3, num4, num5, num6, num7, num8, num9) gr_log_varargs(audit, msg, GR_PSACCT, task, num1, num2, num3, num4, num5, num6, num7, num8, num9)
++#define gr_log_rwxmap(audit, msg, str) gr_log_varargs(audit, msg, GR_RWXMAP, str)
++#define gr_log_rwxmap_vma(audit, msg, str) gr_log_varargs(audit, msg, GR_RWXMAPVMA, str)
++
++void gr_log_varargs(int audit, const char *msg, int argtypes, ...);
++
++#endif
++
++#endif
+diff -Naur backports-3.18.1-1.org/include/linux/grmsg.h backports-3.18.1-1/include/linux/grmsg.h
+--- backports-3.18.1-1.org/include/linux/grmsg.h       1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/include/linux/grmsg.h   2014-12-28 14:10:09.688889562 +0100
+@@ -0,0 +1,117 @@
++#define DEFAULTSECMSG "%.256s[%.16s:%d] uid/euid:%u/%u gid/egid:%u/%u, parent %.256s[%.16s:%d] uid/euid:%u/%u gid/egid:%u/%u"
++#define GR_ACL_PROCACCT_MSG "%.256s[%.16s:%d] IP:%pI4 TTY:%.64s uid/euid:%u/%u gid/egid:%u/%u run time:[%ud %uh %um %us] cpu time:[%ud %uh %um %us] %s with exit code %ld, parent %.256s[%.16s:%d] IP:%pI4 TTY:%.64s uid/euid:%u/%u gid/egid:%u/%u"
++#define GR_PTRACE_ACL_MSG "denied ptrace of %.950s(%.16s:%d) by "
++#define GR_STOPMOD_MSG "denied modification of module state by "
++#define GR_ROFS_BLOCKWRITE_MSG "denied write to block device %.950s by "
++#define GR_ROFS_MOUNT_MSG "denied writable mount of %.950s by "
++#define GR_IOPERM_MSG "denied use of ioperm() by "
++#define GR_IOPL_MSG "denied use of iopl() by "
++#define GR_SHMAT_ACL_MSG "denied attach of shared memory of UID %u, PID %d, ID %u by "
++#define GR_UNIX_CHROOT_MSG "denied connect() to abstract AF_UNIX socket outside of chroot by "
++#define GR_SHMAT_CHROOT_MSG "denied attach of shared memory outside of chroot by "
++#define GR_MEM_READWRITE_MSG "denied access of range %Lx -> %Lx in /dev/mem by "
++#define GR_SYMLINK_MSG "not following symlink %.950s owned by %d.%d by "
++#define GR_LEARN_AUDIT_MSG "%s\t%u\t%u\t%u\t%.4095s\t%.4095s\t%lu\t%lu\t%.4095s\t%lu\t%pI4"
++#define GR_ID_LEARN_MSG "%s\t%u\t%u\t%u\t%.4095s\t%.4095s\t%c\t%d\t%d\t%d\t%pI4"
++#define GR_HIDDEN_ACL_MSG "%s access to hidden file %.950s by "
++#define GR_OPEN_ACL_MSG "%s open of %.950s for%s%s by "
++#define GR_CREATE_ACL_MSG "%s create of %.950s for%s%s by "
++#define GR_FIFO_MSG "denied writing FIFO %.950s of %d.%d by "
++#define GR_MKNOD_CHROOT_MSG "denied mknod of %.950s from chroot by "
++#define GR_MKNOD_ACL_MSG "%s mknod of %.950s by "
++#define GR_UNIXCONNECT_ACL_MSG "%s connect() to the unix domain socket %.950s by "
++#define GR_TTYSNIFF_ACL_MSG "terminal being sniffed by IP:%pI4 %.480s[%.16s:%d], parent %.480s[%.16s:%d] against "
++#define GR_MKDIR_ACL_MSG "%s mkdir of %.950s by "
++#define GR_RMDIR_ACL_MSG "%s rmdir of %.950s by "
++#define GR_UNLINK_ACL_MSG "%s unlink of %.950s by "
++#define GR_SYMLINK_ACL_MSG "%s symlink from %.480s to %.480s by "
++#define GR_HARDLINK_MSG "denied hardlink of %.930s (owned by %d.%d) to %.30s for "
++#define GR_LINK_ACL_MSG "%s link of %.480s to %.480s by "
++#define GR_INHERIT_ACL_MSG "successful inherit of %.480s's ACL for %.480s by "
++#define GR_RENAME_ACL_MSG "%s rename of %.480s to %.480s by "
++#define GR_UNSAFESHARE_EXEC_ACL_MSG "denied exec with cloned fs of %.950s by "
++#define GR_PTRACE_EXEC_ACL_MSG "denied ptrace of %.950s by "
++#define GR_EXEC_ACL_MSG "%s execution of %.950s by "
++#define GR_EXEC_TPE_MSG "denied untrusted exec (due to %.70s) of %.950s by "
++#define GR_SEGVSTART_ACL_MSG "possible exploit bruteforcing on " DEFAULTSECMSG " banning uid %u from login for %lu seconds"
++#define GR_SEGVNOSUID_ACL_MSG "possible exploit bruteforcing on " DEFAULTSECMSG " banning execution for %lu seconds"
++#define GR_MOUNT_CHROOT_MSG "denied mount of %.256s as %.930s from chroot by "
++#define GR_PIVOT_CHROOT_MSG "denied pivot_root from chroot by "
++#define GR_TRUNCATE_ACL_MSG "%s truncate of %.950s by "
++#define GR_ATIME_ACL_MSG "%s access time change of %.950s by "
++#define GR_ACCESS_ACL_MSG "%s access of %.950s for%s%s%s by "
++#define GR_CHROOT_CHROOT_MSG "denied double chroot to %.950s by "
++#define GR_CHMOD_CHROOT_MSG "denied chmod +s of %.950s by "
++#define GR_CHMOD_ACL_MSG "%s chmod of %.950s by "
++#define GR_CHROOT_FCHDIR_MSG "denied fchdir outside of chroot to %.950s by "
++#define GR_CHROOT_FHANDLE_MSG "denied use of file handles inside chroot by "
++#define GR_CHOWN_ACL_MSG "%s chown of %.950s by "
++#define GR_SETXATTR_ACL_MSG "%s setting extended attribute of %.950s by "
++#define GR_REMOVEXATTR_ACL_MSG "%s removing extended attribute of %.950s by "
++#define GR_WRITLIB_ACL_MSG "denied load of writable library %.950s by "
++#define GR_INITF_ACL_MSG "init_variables() failed %s by "
++#define GR_DISABLED_ACL_MSG "Error loading %s, trying to run kernel with acls disabled. To disable acls at startup use <kernel image name> gracl=off from your boot loader"
++#define GR_DEV_ACL_MSG "/dev/grsec: %d bytes sent %d required, being fed garbage by "
++#define GR_SHUTS_ACL_MSG "shutdown auth success for "
++#define GR_SHUTF_ACL_MSG "shutdown auth failure for "
++#define GR_SHUTI_ACL_MSG "ignoring shutdown for disabled RBAC system for "
++#define GR_SEGVMODS_ACL_MSG "segvmod auth success for "
++#define GR_SEGVMODF_ACL_MSG "segvmod auth failure for "
++#define GR_SEGVMODI_ACL_MSG "ignoring segvmod for disabled RBAC system for "
++#define GR_ENABLE_ACL_MSG "%s RBAC system loaded by "
++#define GR_ENABLEF_ACL_MSG "unable to load %s for "
++#define GR_RELOADI_ACL_MSG "ignoring reload request for disabled RBAC system"
++#define GR_RELOAD_ACL_MSG "%s RBAC system reloaded by "
++#define GR_RELOADF_ACL_MSG "failed reload of %s for "
++#define GR_SPROLEI_ACL_MSG "ignoring change to special role for disabled RBAC system for "
++#define GR_SPROLES_ACL_MSG "successful change to special role %s (id %d) by "
++#define GR_SPROLEL_ACL_MSG "special role %s (id %d) exited by "
++#define GR_SPROLEF_ACL_MSG "special role %s failure for "
++#define GR_UNSPROLEI_ACL_MSG "ignoring unauth of special role for disabled RBAC system for "
++#define GR_UNSPROLES_ACL_MSG "successful unauth of special role %s (id %d) by "
++#define GR_INVMODE_ACL_MSG "invalid mode %d by "
++#define GR_PRIORITY_CHROOT_MSG "denied priority change of process (%.16s:%d) by "
++#define GR_FAILFORK_MSG "failed fork with errno %s by "
++#define GR_NICE_CHROOT_MSG "denied priority change by "
++#define GR_UNISIGLOG_MSG "%.32s occurred at %p in "
++#define GR_DUALSIGLOG_MSG "signal %d sent to " DEFAULTSECMSG " by "
++#define GR_SIG_ACL_MSG "denied send of signal %d to protected task " DEFAULTSECMSG " by "
++#define GR_SYSCTL_MSG "denied modification of grsecurity sysctl value : %.32s by "
++#define GR_SYSCTL_ACL_MSG "%s sysctl of %.950s for%s%s by "
++#define GR_TIME_MSG "time set by "
++#define GR_DEFACL_MSG "fatal: unable to find subject for (%.16s:%d), loaded by "
++#define GR_MMAP_ACL_MSG "%s executable mmap of %.950s by "
++#define GR_MPROTECT_ACL_MSG "%s executable mprotect of %.950s by "
++#define GR_SOCK_MSG "denied socket(%.16s,%.16s,%.16s) by "
++#define GR_SOCK_NOINET_MSG "denied socket(%.16s,%.16s,%d) by "
++#define GR_BIND_MSG "denied bind() by "
++#define GR_CONNECT_MSG "denied connect() by "
++#define GR_BIND_ACL_MSG "denied bind() to %pI4 port %u sock type %.16s protocol %.16s by "
++#define GR_CONNECT_ACL_MSG "denied connect() to %pI4 port %u sock type %.16s protocol %.16s by "
++#define GR_IP_LEARN_MSG "%s\t%u\t%u\t%u\t%.4095s\t%.4095s\t%pI4\t%u\t%u\t%u\t%u\t%pI4"
++#define GR_EXEC_CHROOT_MSG "exec of %.980s within chroot by process "
++#define GR_CAP_ACL_MSG "use of %s denied for "
++#define GR_CAP_CHROOT_MSG "use of %s in chroot denied for "
++#define GR_CAP_ACL_MSG2 "use of %s permitted for "
++#define GR_USRCHANGE_ACL_MSG "change to uid %u denied for "
++#define GR_GRPCHANGE_ACL_MSG "change to gid %u denied for "
++#define GR_REMOUNT_AUDIT_MSG "remount of %.256s by "
++#define GR_UNMOUNT_AUDIT_MSG "unmount of %.256s by "
++#define GR_MOUNT_AUDIT_MSG "mount of %.256s to %.256s by "
++#define GR_CHDIR_AUDIT_MSG "chdir to %.980s by "
++#define GR_EXEC_AUDIT_MSG "exec of %.930s (%.128s) by "
++#define GR_RESOURCE_MSG "denied resource overstep by requesting %lu for %.16s against limit %lu for "
++#define GR_RWXMMAP_MSG "denied RWX mmap of %.950s by "
++#define GR_RWXMPROTECT_MSG "denied RWX mprotect of %.950s by "
++#define GR_TEXTREL_AUDIT_MSG "denied text relocation in %.950s, VMA:0x%08lx 0x%08lx by "
++#define GR_PTGNUSTACK_MSG "denied marking stack executable as requested by PT_GNU_STACK marking in %.950s by "
++#define GR_VM86_MSG "denied use of vm86 by "
++#define GR_PTRACE_AUDIT_MSG "process %.950s(%.16s:%d) attached to via ptrace by "
++#define GR_PTRACE_READEXEC_MSG "denied ptrace of unreadable binary %.950s by "
++#define GR_INIT_TRANSFER_MSG "persistent special role transferred privilege to init by "
++#define GR_BADPROCPID_MSG "denied read of sensitive /proc/pid/%s entry via fd passed across exec by "
++#define GR_SYMLINKOWNER_MSG "denied following symlink %.950s since symlink owner %u does not match target owner %u, by "
++#define GR_BRUTE_DAEMON_MSG "bruteforce prevention initiated for the next 30 minutes or until service restarted, stalling each fork 30 seconds.  Please investigate the crash report for "
++#define GR_BRUTE_SUID_MSG "bruteforce prevention initiated due to crash of %.950s against uid %u, banning suid/sgid execs for %u minutes.  Please investigate the crash report for "
++#define GR_IPC_DENIED_MSG "denied %s of overly-permissive IPC object with creator uid %u by "
++#define GR_MSRWRITE_MSG "denied write to CPU MSR by "
+diff -Naur backports-3.18.1-1.org/include/linux/grsecurity.h backports-3.18.1-1/include/linux/grsecurity.h
+--- backports-3.18.1-1.org/include/linux/grsecurity.h  1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/include/linux/grsecurity.h      2014-12-28 14:10:09.688889562 +0100
+@@ -0,0 +1,254 @@
++#ifndef GR_SECURITY_H
++#define GR_SECURITY_H
++#include <linux/fs.h>
++#include <linux/fs_struct.h>
++#include <linux/binfmts.h>
++#include <linux/gracl.h>
++
++/* notify of brain-dead configs */
++#if defined(CONFIG_GRKERNSEC_PROC_USER) && defined(CONFIG_GRKERNSEC_PROC_USERGROUP)
++#error "CONFIG_GRKERNSEC_PROC_USER and CONFIG_GRKERNSEC_PROC_USERGROUP cannot both be enabled."
++#endif
++#if defined(CONFIG_GRKERNSEC_PROC) && !defined(CONFIG_GRKERNSEC_PROC_USER) && !defined(CONFIG_GRKERNSEC_PROC_USERGROUP)
++#error "CONFIG_GRKERNSEC_PROC enabled, but neither CONFIG_GRKERNSEC_PROC_USER nor CONFIG_GRKERNSEC_PROC_USERGROUP enabled"
++#endif
++#if defined(CONFIG_PAX_NOEXEC) && !defined(CONFIG_PAX_PAGEEXEC) && !defined(CONFIG_PAX_SEGMEXEC) && !defined(CONFIG_PAX_KERNEXEC)
++#error "CONFIG_PAX_NOEXEC enabled, but PAGEEXEC, SEGMEXEC, and KERNEXEC are disabled."
++#endif
++#if defined(CONFIG_PAX_ASLR) && !defined(CONFIG_PAX_RANDKSTACK) && !defined(CONFIG_PAX_RANDUSTACK) && !defined(CONFIG_PAX_RANDMMAP)
++#error "CONFIG_PAX_ASLR enabled, but RANDKSTACK, RANDUSTACK, and RANDMMAP are disabled."
++#endif
++#if defined(CONFIG_PAX) && !defined(CONFIG_PAX_NOEXEC) && !defined(CONFIG_PAX_ASLR)
++#error "CONFIG_PAX enabled, but no PaX options are enabled."
++#endif
++
++int gr_handle_new_usb(void);
++
++void gr_handle_brute_attach(int dumpable);
++void gr_handle_brute_check(void);
++void gr_handle_kernel_exploit(void);
++
++char gr_roletype_to_char(void);
++
++int gr_proc_is_restricted(void);
++
++int gr_acl_enable_at_secure(void);
++
++int gr_check_user_change(kuid_t real, kuid_t effective, kuid_t fs);
++int gr_check_group_change(kgid_t real, kgid_t effective, kgid_t fs);
++
++int gr_learn_cap(const struct task_struct *task, const struct cred *cred, const int cap);
++
++void gr_del_task_from_ip_table(struct task_struct *p);
++
++int gr_pid_is_chrooted(struct task_struct *p);
++int gr_handle_chroot_fowner(struct pid *pid, enum pid_type type);
++int gr_handle_chroot_nice(void);
++int gr_handle_chroot_sysctl(const int op);
++int gr_handle_chroot_setpriority(struct task_struct *p,
++                                      const int niceval);
++int gr_chroot_fchdir(struct dentry *u_dentry, struct vfsmount *u_mnt);
++int gr_chroot_fhandle(void);
++int gr_handle_chroot_chroot(const struct dentry *dentry,
++                                 const struct vfsmount *mnt);
++void gr_handle_chroot_chdir(const struct path *path);
++int gr_handle_chroot_chmod(const struct dentry *dentry,
++                                const struct vfsmount *mnt, const int mode);
++int gr_handle_chroot_mknod(const struct dentry *dentry,
++                                const struct vfsmount *mnt, const int mode);
++int gr_handle_chroot_mount(const struct dentry *dentry,
++                                const struct vfsmount *mnt,
++                                const char *dev_name);
++int gr_handle_chroot_pivot(void);
++int gr_handle_chroot_unix(const pid_t pid);
++
++int gr_handle_rawio(const struct inode *inode);
++
++void gr_handle_ioperm(void);
++void gr_handle_iopl(void);
++void gr_handle_msr_write(void);
++
++umode_t gr_acl_umask(void);
++
++int gr_tpe_allow(const struct file *file);
++
++void gr_set_chroot_entries(struct task_struct *task, const struct path *path);
++void gr_clear_chroot_entries(struct task_struct *task);
++
++void gr_log_forkfail(const int retval);
++void gr_log_timechange(void);
++void gr_log_signal(const int sig, const void *addr, const struct task_struct *t);
++void gr_log_chdir(const struct dentry *dentry,
++                       const struct vfsmount *mnt);
++void gr_log_chroot_exec(const struct dentry *dentry,
++                             const struct vfsmount *mnt);
++void gr_log_remount(const char *devname, const int retval);
++void gr_log_unmount(const char *devname, const int retval);
++void gr_log_mount(const char *from, const char *to, const int retval);
++void gr_log_textrel(struct vm_area_struct *vma);
++void gr_log_ptgnustack(struct file *file);
++void gr_log_rwxmmap(struct file *file);
++void gr_log_rwxmprotect(struct vm_area_struct *vma);
++
++int gr_handle_follow_link(const struct inode *parent,
++                               const struct inode *inode,
++                               const struct dentry *dentry,
++                               const struct vfsmount *mnt);
++int gr_handle_fifo(const struct dentry *dentry,
++                        const struct vfsmount *mnt,
++                        const struct dentry *dir, const int flag,
++                        const int acc_mode);
++int gr_handle_hardlink(const struct dentry *dentry,
++                            const struct vfsmount *mnt,
++                            struct inode *inode,
++                            const int mode, const struct filename *to);
++
++int gr_is_capable(const int cap);
++int gr_is_capable_nolog(const int cap);
++int gr_task_is_capable(const struct task_struct *task, const struct cred *cred, const int cap);
++int gr_task_is_capable_nolog(const struct task_struct *task, const int cap);
++
++void gr_copy_label(struct task_struct *tsk);
++void gr_handle_crash(struct task_struct *task, const int sig);
++int gr_handle_signal(const struct task_struct *p, const int sig);
++int gr_check_crash_uid(const kuid_t uid);
++int gr_check_protected_task(const struct task_struct *task);
++int gr_check_protected_task_fowner(struct pid *pid, enum pid_type type);
++int gr_acl_handle_mmap(const struct file *file,
++                            const unsigned long prot);
++int gr_acl_handle_mprotect(const struct file *file,
++                                const unsigned long prot);
++int gr_check_hidden_task(const struct task_struct *tsk);
++__u32 gr_acl_handle_truncate(const struct dentry *dentry,
++                                  const struct vfsmount *mnt);
++__u32 gr_acl_handle_utime(const struct dentry *dentry,
++                               const struct vfsmount *mnt);
++__u32 gr_acl_handle_access(const struct dentry *dentry,
++                                const struct vfsmount *mnt, const int fmode);
++__u32 gr_acl_handle_chmod(const struct dentry *dentry,
++                               const struct vfsmount *mnt, umode_t *mode);
++__u32 gr_acl_handle_chown(const struct dentry *dentry,
++                               const struct vfsmount *mnt);
++__u32 gr_acl_handle_setxattr(const struct dentry *dentry,
++                               const struct vfsmount *mnt);
++__u32 gr_acl_handle_removexattr(const struct dentry *dentry,
++                               const struct vfsmount *mnt);
++int gr_handle_ptrace(struct task_struct *task, const long request);
++int gr_handle_proc_ptrace(struct task_struct *task);
++__u32 gr_acl_handle_execve(const struct dentry *dentry,
++                                const struct vfsmount *mnt);
++int gr_check_crash_exec(const struct file *filp);
++int gr_acl_is_enabled(void);
++void gr_set_role_label(struct task_struct *task, const kuid_t uid,
++                            const kgid_t gid);
++int gr_set_proc_label(const struct dentry *dentry,
++                      const struct vfsmount *mnt,
++                      const int unsafe_flags);
++__u32 gr_acl_handle_hidden_file(const struct dentry *dentry,
++                              const struct vfsmount *mnt);
++__u32 gr_acl_handle_open(const struct dentry *dentry,
++                              const struct vfsmount *mnt, int acc_mode);
++__u32 gr_acl_handle_creat(const struct dentry *dentry,
++                               const struct dentry *p_dentry,
++                               const struct vfsmount *p_mnt,
++                               int open_flags, int acc_mode, const int imode);
++void gr_handle_create(const struct dentry *dentry,
++                           const struct vfsmount *mnt);
++void gr_handle_proc_create(const struct dentry *dentry,
++                         const struct inode *inode);
++__u32 gr_acl_handle_mknod(const struct dentry *new_dentry,
++                               const struct dentry *parent_dentry,
++                               const struct vfsmount *parent_mnt,
++                               const int mode);
++__u32 gr_acl_handle_mkdir(const struct dentry *new_dentry,
++                               const struct dentry *parent_dentry,
++                               const struct vfsmount *parent_mnt);
++__u32 gr_acl_handle_rmdir(const struct dentry *dentry,
++                               const struct vfsmount *mnt);
++void gr_handle_delete(const ino_t ino, const dev_t dev);
++__u32 gr_acl_handle_unlink(const struct dentry *dentry,
++                                const struct vfsmount *mnt);
++__u32 gr_acl_handle_symlink(const struct dentry *new_dentry,
++                                 const struct dentry *parent_dentry,
++                                 const struct vfsmount *parent_mnt,
++                                 const struct filename *from);
++__u32 gr_acl_handle_link(const struct dentry *new_dentry,
++                              const struct dentry *parent_dentry,
++                              const struct vfsmount *parent_mnt,
++                              const struct dentry *old_dentry,
++                              const struct vfsmount *old_mnt, const struct filename *to);
++int gr_handle_symlink_owner(const struct path *link, const struct inode *target);
++int gr_acl_handle_rename(struct dentry *new_dentry,
++                              struct dentry *parent_dentry,
++                              const struct vfsmount *parent_mnt,
++                              struct dentry *old_dentry,
++                              struct inode *old_parent_inode,
++                              struct vfsmount *old_mnt, const struct filename *newname, unsigned int flags);
++void gr_handle_rename(struct inode *old_dir, struct inode *new_dir,
++                              struct dentry *old_dentry,
++                              struct dentry *new_dentry,
++                              struct vfsmount *mnt, const __u8 replace, unsigned int flags);
++__u32 gr_check_link(const struct dentry *new_dentry,
++                         const struct dentry *parent_dentry,
++                         const struct vfsmount *parent_mnt,
++                         const struct dentry *old_dentry,
++                         const struct vfsmount *old_mnt);
++int gr_acl_handle_filldir(const struct file *file, const char *name,
++                               const unsigned int namelen, const ino_t ino);
++
++__u32 gr_acl_handle_unix(const struct dentry *dentry,
++                              const struct vfsmount *mnt);
++void gr_acl_handle_exit(void);
++void gr_acl_handle_psacct(struct task_struct *task, const long code);
++int gr_acl_handle_procpidmem(const struct task_struct *task);
++int gr_handle_rofs_mount(struct dentry *dentry, struct vfsmount *mnt, int mnt_flags);
++int gr_handle_rofs_blockwrite(struct dentry *dentry, struct vfsmount *mnt, int acc_mode);
++void gr_audit_ptrace(struct task_struct *task);
++dev_t gr_get_dev_from_dentry(struct dentry *dentry);
++void gr_put_exec_file(struct task_struct *task);
++
++int gr_ptrace_readexec(struct file *file, int unsafe_flags);
++
++#if defined(CONFIG_GRKERNSEC) && (defined(CONFIG_GRKERNSEC_RESLOG) || !defined(CONFIG_GRKERNSEC_NO_RBAC))
++extern void gr_learn_resource(const struct task_struct *task, const int res,
++                            const unsigned long wanted, const int gt);
++#else
++static inline void gr_learn_resource(const struct task_struct *task, const int res,
++                                   const unsigned long wanted, const int gt)
++{
++}
++#endif
++
++#ifdef CONFIG_GRKERNSEC_RESLOG
++extern void gr_log_resource(const struct task_struct *task, const int res,
++                                 const unsigned long wanted, const int gt);
++#else
++static inline void gr_log_resource(const struct task_struct *task, const int res,
++                                 const unsigned long wanted, const int gt)
++{
++}
++#endif
++
++#ifdef CONFIG_GRKERNSEC
++void task_grsec_rbac(struct seq_file *m, struct task_struct *p);
++void gr_handle_vm86(void);
++void gr_handle_mem_readwrite(u64 from, u64 to);
++
++void gr_log_badprocpid(const char *entry);
++
++extern int grsec_enable_dmesg;
++extern int grsec_disable_privio;
++
++#ifdef CONFIG_GRKERNSEC_PROC_USERGROUP
++extern kgid_t grsec_proc_gid;
++#endif
++
++#ifdef CONFIG_GRKERNSEC_CHROOT_FINDTASK
++extern int grsec_enable_chroot_findtask;
++#endif
++#ifdef CONFIG_GRKERNSEC_SETXID
++extern int grsec_enable_setxid;
++#endif
++#endif
++
++#endif
+diff -Naur backports-3.18.1-1.org/include/linux/grsock.h backports-3.18.1-1/include/linux/grsock.h
+--- backports-3.18.1-1.org/include/linux/grsock.h      1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/include/linux/grsock.h  2014-12-28 14:10:09.688889562 +0100
+@@ -0,0 +1,19 @@
++#ifndef __GRSOCK_H
++#define __GRSOCK_H
++
++extern void gr_attach_curr_ip(const struct sock *sk);
++extern int gr_handle_sock_all(const int family, const int type,
++                            const int protocol);
++extern int gr_handle_sock_server(const struct sockaddr *sck);
++extern int gr_handle_sock_server_other(const struct sock *sck);
++extern int gr_handle_sock_client(const struct sockaddr *sck);
++extern int gr_search_connect(struct socket * sock,
++                           struct sockaddr_in * addr);
++extern int gr_search_bind(struct socket * sock,
++                        struct sockaddr_in * addr);
++extern int gr_search_listen(struct socket * sock);
++extern int gr_search_accept(struct socket * sock);
++extern int gr_search_socket(const int domain, const int type,
++                          const int protocol);
++
++#endif
+diff -Naur backports-3.18.1-1.org/include/linux/unaligned/access_ok.h backports-3.18.1-1/include/linux/unaligned/access_ok.h
+--- backports-3.18.1-1.org/include/linux/unaligned/access_ok.h 2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/include/linux/unaligned/access_ok.h     2014-12-28 14:10:09.712889681 +0100
+@@ -4,34 +4,34 @@
+ #include <linux/kernel.h>
+ #include <asm/byteorder.h>
+ 
+-static inline u16 get_unaligned_le16(const void *p)
++static inline u16 __intentional_overflow(-1) get_unaligned_le16(const void *p)
+ {
+-      return le16_to_cpup((__le16 *)p);
++      return le16_to_cpup((const __le16 *)p);
+ }
+ 
+-static inline u32 get_unaligned_le32(const void *p)
++static inline u32 __intentional_overflow(-1) get_unaligned_le32(const void *p)
+ {
+-      return le32_to_cpup((__le32 *)p);
++      return le32_to_cpup((const __le32 *)p);
+ }
+ 
+-static inline u64 get_unaligned_le64(const void *p)
++static inline u64 __intentional_overflow(-1) get_unaligned_le64(const void *p)
+ {
+-      return le64_to_cpup((__le64 *)p);
++      return le64_to_cpup((const __le64 *)p);
+ }
+ 
+-static inline u16 get_unaligned_be16(const void *p)
++static inline u16 __intentional_overflow(-1) get_unaligned_be16(const void *p)
+ {
+-      return be16_to_cpup((__be16 *)p);
++      return be16_to_cpup((const __be16 *)p);
+ }
+ 
+-static inline u32 get_unaligned_be32(const void *p)
++static inline u32 __intentional_overflow(-1) get_unaligned_be32(const void *p)
+ {
+-      return be32_to_cpup((__be32 *)p);
++      return be32_to_cpup((const __be32 *)p);
+ }
+ 
+-static inline u64 get_unaligned_be64(const void *p)
++static inline u64 __intentional_overflow(-1) get_unaligned_be64(const void *p)
+ {
+-      return be64_to_cpup((__be64 *)p);
++      return be64_to_cpup((const __be64 *)p);
+ }
+ 
+ static inline void put_unaligned_le16(u16 val, void *p)
+diff -Naur backports-3.18.1-1.org/include/media/v4l2-dev.h backports-3.18.1-1/include/media/v4l2-dev.h
+--- backports-3.18.1-1.org/include/media/v4l2-dev.h    2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/include/media/v4l2-dev.h        2014-12-28 14:10:09.716889709 +0100
+@@ -75,7 +75,7 @@
+       int (*mmap) (struct file *, struct vm_area_struct *);
+       int (*open) (struct file *);
+       int (*release) (struct file *);
+-};
++} __do_const;
+ 
+ /*
+  * Newer version of video_device, handled by videodev2.c
+diff -Naur backports-3.18.1-1.org/include/media/v4l2-device.h backports-3.18.1-1/include/media/v4l2-device.h
+--- backports-3.18.1-1.org/include/media/v4l2-device.h 2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/include/media/v4l2-device.h     2014-12-28 14:10:09.716889709 +0100
+@@ -95,7 +95,7 @@
+    this function returns 0. If the name ends with a digit (e.g. cx18),
+    then the name will be set to cx18-0 since cx180 looks really odd. */
+ int v4l2_device_set_name(struct v4l2_device *v4l2_dev, const char *basename,
+-                                              atomic_t *instance);
++                                              atomic_unchecked_t *instance);
+ 
+ /* Set v4l2_dev->dev to NULL. Call when the USB parent disconnects.
+    Since the parent disappears this ensures that v4l2_dev doesn't have an
+diff -Naur backports-3.18.1-1.org/include/net/bluetooth/l2cap.h backports-3.18.1-1/include/net/bluetooth/l2cap.h
+--- backports-3.18.1-1.org/include/net/bluetooth/l2cap.h       2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/include/net/bluetooth/l2cap.h   2014-12-28 14:10:09.716889709 +0100
+@@ -608,7 +608,7 @@
+                                                    unsigned char *kdata,
+                                                    struct iovec *iov,
+                                                    int len);
+-};
++} __do_const;
+ 
+ struct l2cap_conn {
+       struct hci_conn         *hcon;
+diff -Naur backports-3.18.1-1.org/include/net/mac80211.h backports-3.18.1-1/include/net/mac80211.h
+--- backports-3.18.1-1.org/include/net/mac80211.h      2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/include/net/mac80211.h  2014-12-28 14:10:09.724889743 +0100
+@@ -4648,7 +4648,7 @@
+       void (*remove_sta_debugfs)(void *priv, void *priv_sta);
+ 
+       u32 (*get_expected_throughput)(void *priv_sta);
+-};
++} __do_const;
+ 
+ static inline int rate_supported(struct ieee80211_sta *sta,
+                                enum ieee80211_band band,
+diff -Naur backports-3.18.1-1.org/include/trace/events/fs.h backports-3.18.1-1/include/trace/events/fs.h
+--- backports-3.18.1-1.org/include/trace/events/fs.h   1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/include/trace/events/fs.h       2014-12-28 14:10:09.728889769 +0100
+@@ -0,0 +1,53 @@
++#undef TRACE_SYSTEM
++#define TRACE_SYSTEM fs
++
++#if !defined(_TRACE_FS_H) || defined(TRACE_HEADER_MULTI_READ)
++#define _TRACE_FS_H
++
++#include <linux/fs.h>
++#include <linux/tracepoint.h>
++
++TRACE_EVENT(do_sys_open,
++
++      TP_PROTO(const char *filename, int flags, int mode),
++
++      TP_ARGS(filename, flags, mode),
++
++      TP_STRUCT__entry(
++              __string(       filename, filename              )
++              __field(        int, flags                      )
++              __field(        int, mode                       )
++      ),
++
++      TP_fast_assign(
++              __assign_str(filename, filename);
++              __entry->flags = flags;
++              __entry->mode = mode;
++      ),
++
++      TP_printk("\"%s\" %x %o",
++                __get_str(filename), __entry->flags, __entry->mode)
++);
++
++TRACE_EVENT(open_exec,
++
++      TP_PROTO(const char *filename),
++
++      TP_ARGS(filename),
++
++      TP_STRUCT__entry(
++              __string(       filename, filename              )
++      ),
++
++      TP_fast_assign(
++              __assign_str(filename, filename);
++      ),
++
++      TP_printk("\"%s\"",
++                __get_str(filename))
++);
++
++#endif /* _TRACE_FS_H */
++
++/* This part must be outside protection */
++#include <trace/define_trace.h>
+diff -Naur backports-3.18.1-1.org/net/bluetooth/6lowpan.c backports-3.18.1-1/net/bluetooth/6lowpan.c
+--- backports-3.18.1-1.org/net/bluetooth/6lowpan.c     2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/bluetooth/6lowpan.c 2014-12-28 14:10:09.784890034 +0100
+@@ -367,7 +367,6 @@
+ 
+ drop:
+       dev->stats.rx_dropped++;
+-      kfree_skb(skb);
+       return NET_RX_DROP;
+ }
+ 
+diff -Naur backports-3.18.1-1.org/net/bluetooth/bnep/core.c backports-3.18.1-1/net/bluetooth/bnep/core.c
+--- backports-3.18.1-1.org/net/bluetooth/bnep/core.c   2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/bluetooth/bnep/core.c       2014-12-28 14:10:09.784890034 +0100
+@@ -533,6 +533,9 @@
+ 
+       BT_DBG("");
+ 
++      if (!l2cap_is_socket(sock))
++              return -EBADFD;
++
+       baswap((void *) dst, &l2cap_pi(sock->sk)->chan->dst);
+       baswap((void *) src, &l2cap_pi(sock->sk)->chan->src);
+ 
+diff -Naur backports-3.18.1-1.org/net/bluetooth/cmtp/core.c backports-3.18.1-1/net/bluetooth/cmtp/core.c
+--- backports-3.18.1-1.org/net/bluetooth/cmtp/core.c   2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/bluetooth/cmtp/core.c       2014-12-28 14:10:09.784890034 +0100
+@@ -334,6 +334,9 @@
+ 
+       BT_DBG("");
+ 
++      if (!l2cap_is_socket(sock))
++              return -EBADFD;
++
+       session = kzalloc(sizeof(struct cmtp_session), GFP_KERNEL);
+       if (!session)
+               return -ENOMEM;
+diff -Naur backports-3.18.1-1.org/net/bluetooth/hci_sock.c backports-3.18.1-1/net/bluetooth/hci_sock.c
+--- backports-3.18.1-1.org/net/bluetooth/hci_sock.c    2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/bluetooth/hci_sock.c        2014-12-28 14:10:09.784890034 +0100
+@@ -1067,7 +1067,7 @@
+                       uf.event_mask[1] = *((u32 *) f->event_mask + 1);
+               }
+ 
+-              len = min_t(unsigned int, len, sizeof(uf));
++              len = min((size_t)len, sizeof(uf));
+               if (copy_from_user(&uf, optval, len)) {
+                       err = -EFAULT;
+                       break;
+diff -Naur backports-3.18.1-1.org/net/bluetooth/hidp/core.c backports-3.18.1-1/net/bluetooth/hidp/core.c
+--- backports-3.18.1-1.org/net/bluetooth/hidp/core.c   2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/bluetooth/hidp/core.c       2014-12-28 14:10:09.784890034 +0100
+@@ -1322,13 +1322,14 @@
+ {
+       struct hidp_session *session;
+       struct l2cap_conn *conn;
+-      struct l2cap_chan *chan = l2cap_pi(ctrl_sock->sk)->chan;
++      struct l2cap_chan *chan;
+       int ret;
+ 
+       ret = hidp_verify_sockets(ctrl_sock, intr_sock);
+       if (ret)
+               return ret;
+ 
++      chan = l2cap_pi(ctrl_sock->sk)->chan;
+       conn = NULL;
+       l2cap_chan_lock(chan);
+       if (chan->conn)
+diff -Naur backports-3.18.1-1.org/net/bluetooth/l2cap_core.c backports-3.18.1-1/net/bluetooth/l2cap_core.c
+--- backports-3.18.1-1.org/net/bluetooth/l2cap_core.c  2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/bluetooth/l2cap_core.c      2014-12-28 14:10:09.784890034 +0100
+@@ -3512,8 +3512,10 @@
+                       break;
+ 
+               case L2CAP_CONF_RFC:
+-                      if (olen == sizeof(rfc))
+-                              memcpy(&rfc, (void *)val, olen);
++                      if (olen != sizeof(rfc))
++                              break;
++
++                      memcpy(&rfc, (void *)val, olen);
+ 
+                       if (test_bit(CONF_STATE2_DEVICE, &chan->conf_state) &&
+                           rfc.mode != chan->mode)
+diff -Naur backports-3.18.1-1.org/net/bluetooth/l2cap_sock.c backports-3.18.1-1/net/bluetooth/l2cap_sock.c
+--- backports-3.18.1-1.org/net/bluetooth/l2cap_sock.c  2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/bluetooth/l2cap_sock.c      2014-12-28 14:10:09.788890064 +0100
+@@ -628,7 +628,8 @@
+       struct sock *sk = sock->sk;
+       struct l2cap_chan *chan = l2cap_pi(sk)->chan;
+       struct l2cap_options opts;
+-      int len, err = 0;
++      int err = 0;
++      size_t len = optlen;
+       u32 opt;
+ 
+       BT_DBG("sk %p", sk);
+@@ -655,7 +656,7 @@
+               opts.max_tx   = chan->max_tx;
+               opts.txwin_size = chan->tx_win;
+ 
+-              len = min_t(unsigned int, sizeof(opts), optlen);
++              len = min(sizeof(opts), len);
+               if (copy_from_user((char *) &opts, optval, len)) {
+                       err = -EFAULT;
+                       break;
+@@ -742,7 +743,8 @@
+       struct bt_security sec;
+       struct bt_power pwr;
+       struct l2cap_conn *conn;
+-      int len, err = 0;
++      int err = 0;
++      size_t len = optlen;
+       u32 opt;
+ 
+       BT_DBG("sk %p", sk);
+@@ -766,7 +768,7 @@
+ 
+               sec.level = BT_SECURITY_LOW;
+ 
+-              len = min_t(unsigned int, sizeof(sec), optlen);
++              len = min(sizeof(sec), len);
+               if (copy_from_user((char *) &sec, optval, len)) {
+                       err = -EFAULT;
+                       break;
+@@ -862,7 +864,7 @@
+ 
+               pwr.force_active = BT_POWER_FORCE_ACTIVE_ON;
+ 
+-              len = min_t(unsigned int, sizeof(pwr), optlen);
++              len = min(sizeof(pwr), len);
+               if (copy_from_user((char *) &pwr, optval, len)) {
+                       err = -EFAULT;
+                       break;
+diff -Naur backports-3.18.1-1.org/net/bluetooth/rfcomm/sock.c backports-3.18.1-1/net/bluetooth/rfcomm/sock.c
+--- backports-3.18.1-1.org/net/bluetooth/rfcomm/sock.c 2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/bluetooth/rfcomm/sock.c     2014-12-28 14:10:09.788890064 +0100
+@@ -695,7 +695,7 @@
+       struct sock *sk = sock->sk;
+       struct bt_security sec;
+       int err = 0;
+-      size_t len;
++      size_t len = optlen;
+       u32 opt;
+ 
+       BT_DBG("sk %p", sk);
+@@ -717,7 +717,7 @@
+ 
+               sec.level = BT_SECURITY_LOW;
+ 
+-              len = min_t(unsigned int, sizeof(sec), optlen);
++              len = min(sizeof(sec), len);
+               if (copy_from_user((char *) &sec, optval, len)) {
+                       err = -EFAULT;
+                       break;
+diff -Naur backports-3.18.1-1.org/net/bluetooth/rfcomm/tty.c backports-3.18.1-1/net/bluetooth/rfcomm/tty.c
+--- backports-3.18.1-1.org/net/bluetooth/rfcomm/tty.c  2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/bluetooth/rfcomm/tty.c      2014-12-28 14:10:09.788890064 +0100
+@@ -752,7 +752,7 @@
+       BT_DBG("tty %p id %d", tty, tty->index);
+ 
+       BT_DBG("dev %p dst %pMR channel %d opened %d", dev, &dev->dst,
+-             dev->channel, dev->port.count);
++             dev->channel, atomic_read(&dev->port.count));
+ 
+       err = tty_port_open(&dev->port, tty, filp);
+       if (err)
+@@ -775,7 +775,7 @@
+       struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data;
+ 
+       BT_DBG("tty %p dev %p dlc %p opened %d", tty, dev, dev->dlc,
+-                                              dev->port.count);
++                                              atomic_read(&dev->port.count));
+ 
+       tty_port_close(&dev->port, tty, filp);
+ }
+diff -Naur backports-3.18.1-1.org/net/ieee802154/6lowpan_rtnl.c backports-3.18.1-1/net/ieee802154/6lowpan_rtnl.c
+--- backports-3.18.1-1.org/net/ieee802154/6lowpan_rtnl.c       2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/ieee802154/6lowpan_rtnl.c   2014-12-28 14:10:09.796890100 +0100
+@@ -639,7 +639,7 @@
+       dev_put(real_dev);
+ }
+ 
+-static struct rtnl_link_ops lowpan_link_ops __read_mostly = {
++static struct rtnl_link_ops lowpan_link_ops = {
+       .kind           = "lowpan",
+       .priv_size      = sizeof(struct lowpan_dev_info),
+       .setup          = lowpan_setup,
+diff -Naur backports-3.18.1-1.org/net/ieee802154/reassembly.c backports-3.18.1-1/net/ieee802154/reassembly.c
+--- backports-3.18.1-1.org/net/ieee802154/reassembly.c 2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/ieee802154/reassembly.c     2014-12-28 14:10:09.796890100 +0100
+@@ -460,14 +460,13 @@
+ 
+ static int __net_init lowpan_frags_ns_sysctl_register(struct net *net)
+ {
+-      struct ctl_table *table;
++      ctl_table_no_const *table = NULL;
+       struct ctl_table_header *hdr;
+       struct netns_ieee802154_lowpan *ieee802154_lowpan =
+               net_ieee802154_lowpan(net);
+ 
+-      table = lowpan_frags_ns_ctl_table;
+       if (!net_eq(net, &init_net)) {
+-              table = kmemdup(table, sizeof(lowpan_frags_ns_ctl_table),
++              table = kmemdup(lowpan_frags_ns_ctl_table, sizeof(lowpan_frags_ns_ctl_table),
+                               GFP_KERNEL);
+               if (table == NULL)
+                       goto err_alloc;
+@@ -494,8 +493,7 @@
+       return 0;
+ 
+ err_reg:
+-      if (!net_eq(net, &init_net))
+-              kfree(table);
++      kfree(table);
+ err_alloc:
+       return -ENOMEM;
+ }
+diff -Naur backports-3.18.1-1.org/net/mac80211/cfg.c backports-3.18.1-1/net/mac80211/cfg.c
+--- backports-3.18.1-1.org/net/mac80211/cfg.c  2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/mac80211/cfg.c      2014-12-28 14:10:09.812890175 +0100
+@@ -541,7 +541,7 @@
+                       ret = ieee80211_vif_use_channel(sdata, chandef,
+                                       IEEE80211_CHANCTX_EXCLUSIVE);
+               }
+-      } else if (local->open_count == local->monitors) {
++      } else if (local_read(&local->open_count) == local->monitors) {
+               local->_oper_chandef = *chandef;
+               ieee80211_hw_config(local, 0);
+       }
+@@ -3326,7 +3326,7 @@
+               else
+                       local->probe_req_reg--;
+ 
+-              if (!local->open_count)
++              if (!local_read(&local->open_count))
+                       break;
+ 
+               ieee80211_queue_work(&local->hw, &local->reconfig_filter);
+@@ -3460,8 +3460,8 @@
+       if (chanctx_conf) {
+               *chandef = sdata->vif.bss_conf.chandef;
+               ret = 0;
+-      } else if (local->open_count > 0 &&
+-                 local->open_count == local->monitors &&
++      } else if (local_read(&local->open_count) > 0 &&
++                 local_read(&local->open_count) == local->monitors &&
+                  sdata->vif.type == NL80211_IFTYPE_MONITOR) {
+               if (local->use_chanctx)
+                       *chandef = local->monitor_chandef;
+diff -Naur backports-3.18.1-1.org/net/mac80211/ieee80211_i.h backports-3.18.1-1/net/mac80211/ieee80211_i.h
+--- backports-3.18.1-1.org/net/mac80211/ieee80211_i.h  2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/mac80211/ieee80211_i.h      2014-12-28 14:10:09.812890175 +0100
+@@ -29,6 +29,7 @@
+ #include <net/ieee80211_radiotap.h>
+ #include <net/cfg80211.h>
+ #include <net/mac80211.h>
++#include <asm/local.h>
+ #include "key.h"
+ #include "sta_info.h"
+ #include "debug.h"
+@@ -1057,7 +1058,7 @@
+       /* also used to protect ampdu_ac_queue and amdpu_ac_stop_refcnt */
+       spinlock_t queue_stop_reason_lock;
+ 
+-      int open_count;
++      local_t open_count;
+       int monitors, cooked_mntrs;
+       /* number of interfaces with corresponding FIF_ flags */
+       int fif_fcsfail, fif_plcpfail, fif_control, fif_other_bss, fif_pspoll,
+diff -Naur backports-3.18.1-1.org/net/mac80211/iface.c backports-3.18.1-1/net/mac80211/iface.c
+--- backports-3.18.1-1.org/net/mac80211/iface.c        2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/mac80211/iface.c    2014-12-28 14:10:09.812890175 +0100
+@@ -532,7 +532,7 @@
+               break;
+       }
+ 
+-      if (local->open_count == 0) {
++      if (local_read(&local->open_count) == 0) {
+               res = drv_start(local);
+               if (res)
+                       goto err_del_bss;
+@@ -579,7 +579,7 @@
+                       res = drv_add_interface(local, sdata);
+                       if (res)
+                               goto err_stop;
+-              } else if (local->monitors == 0 && local->open_count == 0) {
++              } else if (local->monitors == 0 && local_read(&local->open_count) == 0) {
+                       res = ieee80211_add_virtual_monitor(local);
+                       if (res)
+                               goto err_stop;
+@@ -688,7 +688,7 @@
+               atomic_inc(&local->iff_promiscs);
+ 
+       if (coming_up)
+-              local->open_count++;
++              local_inc(&local->open_count);
+ 
+       if (hw_reconf_flags)
+               ieee80211_hw_config(local, hw_reconf_flags);
+@@ -726,7 +726,7 @@
+  err_del_interface:
+       drv_remove_interface(local, sdata);
+  err_stop:
+-      if (!local->open_count)
++      if (!local_read(&local->open_count))
+               drv_stop(local);
+  err_del_bss:
+       sdata->bss = NULL;
+@@ -892,7 +892,7 @@
+       }
+ 
+       if (going_down)
+-              local->open_count--;
++              local_dec(&local->open_count);
+ 
+       switch (sdata->vif.type) {
+       case NL80211_IFTYPE_AP_VLAN:
+@@ -954,7 +954,7 @@
+       }
+       spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+ 
+-      if (local->open_count == 0)
++      if (local_read(&local->open_count) == 0)
+               ieee80211_clear_tx_pending(local);
+ 
+       /*
+@@ -997,7 +997,7 @@
+       if (cancel_scan)
+               flush_delayed_work(&local->scan_work);
+ 
+-      if (local->open_count == 0) {
++      if (local_read(&local->open_count) == 0) {
+               ieee80211_stop_device(local);
+ 
+               /* no reconfiguring after stop! */
+@@ -1008,7 +1008,7 @@
+       ieee80211_configure_filter(local);
+       ieee80211_hw_config(local, hw_reconf_flags);
+ 
+-      if (local->monitors == local->open_count)
++      if (local->monitors == local_read(&local->open_count))
+               ieee80211_add_virtual_monitor(local);
+ }
+ 
+diff -Naur backports-3.18.1-1.org/net/mac80211/main.c backports-3.18.1-1/net/mac80211/main.c
+--- backports-3.18.1-1.org/net/mac80211/main.c 2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/mac80211/main.c     2014-12-28 14:10:09.812890175 +0100
+@@ -175,7 +175,7 @@
+               changed &= ~(IEEE80211_CONF_CHANGE_CHANNEL |
+                            IEEE80211_CONF_CHANGE_POWER);
+ 
+-      if (changed && local->open_count) {
++      if (changed && local_read(&local->open_count)) {
+               ret = drv_config(local, changed);
+               /*
+                * Goal:
+diff -Naur backports-3.18.1-1.org/net/mac80211/pm.c backports-3.18.1-1/net/mac80211/pm.c
+--- backports-3.18.1-1.org/net/mac80211/pm.c   2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/mac80211/pm.c       2014-12-28 14:10:09.812890175 +0100
+@@ -12,7 +12,7 @@
+       struct ieee80211_sub_if_data *sdata;
+       struct sta_info *sta;
+ 
+-      if (!local->open_count)
++      if (!local_read(&local->open_count))
+               goto suspend;
+ 
+       ieee80211_scan_cancel(local);
+@@ -59,7 +59,7 @@
+       cancel_work_sync(&local->dynamic_ps_enable_work);
+       del_timer_sync(&local->dynamic_ps_timer);
+ 
+-      local->wowlan = wowlan && local->open_count;
++      local->wowlan = wowlan && local_read(&local->open_count);
+       if (local->wowlan) {
+               int err = drv_suspend(local, wowlan);
+               if (err < 0) {
+@@ -125,7 +125,7 @@
+       WARN_ON(!list_empty(&local->chanctx_list));
+ 
+       /* stop hardware - this must stop RX */
+-      if (local->open_count)
++      if (local_read(&local->open_count))
+               ieee80211_stop_device(local);
+ 
+  suspend:
+diff -Naur backports-3.18.1-1.org/net/mac80211/rate.c backports-3.18.1-1/net/mac80211/rate.c
+--- backports-3.18.1-1.org/net/mac80211/rate.c 2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/mac80211/rate.c     2014-12-28 14:10:09.812890175 +0100
+@@ -720,7 +720,7 @@
+ 
+       ASSERT_RTNL();
+ 
+-      if (local->open_count)
++      if (local_read(&local->open_count))
+               return -EBUSY;
+ 
+       if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) {
+diff -Naur backports-3.18.1-1.org/net/mac80211/util.c backports-3.18.1-1/net/mac80211/util.c
+--- backports-3.18.1-1.org/net/mac80211/util.c 2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/mac80211/util.c     2014-12-28 14:10:09.816890209 +0100
+@@ -1669,7 +1669,7 @@
+       }
+ #endif
+       /* everything else happens only if HW was up & running */
+-      if (!local->open_count)
++      if (!local_read(&local->open_count))
+               goto wake_up;
+ 
+       /*
+@@ -1895,7 +1895,7 @@
+       local->in_reconfig = false;
+       barrier();
+ 
+-      if (local->monitors == local->open_count && local->monitors > 0)
++      if (local->monitors == local_read(&local->open_count) && local->monitors > 0)
+               ieee80211_add_virtual_monitor(local);
+ 
+       /*
+diff -Naur backports-3.18.1-1.org/net/wireless/wext-core.c backports-3.18.1-1/net/wireless/wext-core.c
+--- backports-3.18.1-1.org/net/wireless/wext-core.c    2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/net/wireless/wext-core.c        2014-12-28 14:10:09.832890290 +0100
+@@ -748,8 +748,7 @@
+                */
+ 
+               /* Support for very large requests */
+-              if ((descr->flags & IW_DESCR_FLAG_NOMAX) &&
+-                  (user_length > descr->max_tokens)) {
++              if (user_length > descr->max_tokens) {
+                       /* Allow userspace to GET more than max so
+                        * we can support any size GET requests.
+                        * There is still a limit : -ENOMEM.
+@@ -788,22 +787,6 @@
+               }
+       }
+ 
+-      if (IW_IS_GET(cmd) && !(descr->flags & IW_DESCR_FLAG_NOMAX)) {
+-              /*
+-               * If this is a GET, but not NOMAX, it means that the extra
+-               * data is not bounded by userspace, but by max_tokens. Thus
+-               * set the length to max_tokens. This matches the extra data
+-               * allocation.
+-               * The driver should fill it with the number of tokens it
+-               * provided, and it may check iwp->length rather than having
+-               * knowledge of max_tokens. If the driver doesn't change the
+-               * iwp->length, this ioctl just copies back max_token tokens
+-               * filled with zeroes. Hopefully the driver isn't claiming
+-               * them to be valid data.
+-               */
+-              iwp->length = descr->max_tokens;
+-      }
+-
+       err = handler(dev, info, (union iwreq_data *) iwp, extra);
+ 
+       iwp->length += essid_compat;

diff --git a/src/patches/backports-3.18.1-1-ipfire-build.patch b/src/patches/backports-3.18.1-1-ipfire-build.patch
new file mode 100644 (file)
index 0000000..0b2998e
--- /dev/null
+++ b/src/patches/backports-3.18.1-1-ipfire-build.patch
@@ -0,0 +1,34 @@
+diff -Naur backports-3.18.1-1.org/Makefile backports-3.18.1-1/Makefile
+--- backports-3.18.1-1.org/Makefile    2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/Makefile        2014-12-29 15:51:19.358111370 +0100
+@@ -8,9 +8,9 @@
+ SHELL := /bin/bash
+ BACKPORT_PWD := $(shell pwd)
+ 
+-KMODDIR ?= updates
++KMODDIR ?= kernel
+ ifneq ($(origin KLIB), undefined)
+-KMODPATH_ARG := "INSTALL_MOD_PATH=$(KLIB)"
++KMODPATH_ARG :=
+ else
+ KLIB := /lib/modules/$(shell uname -r)/
+ KMODPATH_ARG :=
+diff -Naur backports-3.18.1-1.org/Makefile.real backports-3.18.1-1/Makefile.real
+--- backports-3.18.1-1.org/Makefile.real       2014-12-21 22:37:13.000000000 +0100
++++ backports-3.18.1-1/Makefile.real   2014-12-29 15:51:40.934780933 +0100
+@@ -92,11 +92,11 @@
+       @$(MAKE) -C $(KLIB_BUILD) M=$(BACKPORT_PWD)                     \
+               INSTALL_MOD_DIR=$(KMODDIR) $(KMODPATH_ARG)              \
+               modules_install
+-      @./scripts/blacklist.sh $(KLIB)/ $(KLIB)/$(KMODDIR)
++#     @./scripts/blacklist.sh $(KLIB)/ $(KLIB)/$(KMODDIR)
+       @./scripts/compress_modules.sh $(KLIB)/$(KMODDIR)
+-      @./scripts/check_depmod.sh
+-      @/sbin/depmod -a
+-      @./scripts/update-initramfs.sh $(KLIB)
++#     @./scripts/check_depmod.sh
++#     @/sbin/depmod -a
++#     @./scripts/update-initramfs.sh $(KLIB)
+       @echo
+       @echo Your backported driver modules should be installed now.
+       @echo Reboot.

diff --git a/src/patches/backports-3.18.1-1_add_libertas_uap.patch b/src/patches/backports-3.18.1-1_add_libertas_uap.patch
new file mode 100644 (file)
index 0000000..9a5b01b
--- /dev/null
+++ b/src/patches/backports-3.18.1-1_add_libertas_uap.patch
@@ -0,0 +1,5058 @@
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/Kconfig backports-3.18.1-1/drivers/net/wireless/Kconfig
+--- backports-3.18.1-1.org/drivers/net/wireless/Kconfig        2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/Kconfig    2014-12-29 20:37:43.945764119 +0100
+@@ -55,6 +55,14 @@
+       ---help---
+         A driver for Marvell Libertas 8388 USB devices using thinfirm.
+ 
++config LIBERTAS_UAP
++      tristate "Marvell 8xxx Libertas UAP"
++      depends on MAC80211
++      depends on MMC
++      select FW_LOADER
++      ---help---
++        Driver for Marvell Libertas 8xxx micro AP.
++
+ config AIRO
+       depends on n
+       tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/libertas_uap/Makefile backports-3.18.1-1/drivers/net/wireless/libertas_uap/Makefile
+--- backports-3.18.1-1.org/drivers/net/wireless/libertas_uap/Makefile  1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/libertas_uap/Makefile      2014-12-29 20:41:50.975778546 +0100
+@@ -0,0 +1,6 @@
++obj-$(CPTCFG_LIBERTAS_UAP) += uap8xxx.o
++
++uap8xxx-y += uap_main.o uap_sdio_mmc.o
++uap8xxx-$(CPTCFG_PROC_FS) += uap_proc.o uap_debug.o
++
++EXTRA_CFLAGS += -DFPNUM='"52"' -DPXA3XX_DMA_ALIGN -DDEBUG_LEVEL1
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/libertas_uap/uap_debug.c backports-3.18.1-1/drivers/net/wireless/libertas_uap/uap_debug.c
+--- backports-3.18.1-1.org/drivers/net/wireless/libertas_uap/uap_debug.c       1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/libertas_uap/uap_debug.c   2014-12-29 20:37:43.949097590 +0100
+@@ -0,0 +1,260 @@
++/** @file uap_debug.c
++  * @brief This file contains functions for debug proc file.
++  *
++  * Copyright (C) 2008-2009, Marvell International Ltd.
++  *
++  * This software file (the "File") is distributed by Marvell International
++  * Ltd. under the terms of the GNU General Public License Version 2, June 1991
++  * (the "License").  You may use, redistribute and/or modify this File in
++  * accordance with the terms and conditions of the License, a copy of which
++  * is available along with the File in the gpl.txt file or by writing to
++  * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++  * 02111-1307 or on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
++  *
++  * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
++  * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
++  * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
++  * this warranty disclaimer.
++  *
++  */
++#ifdef CONFIG_PROC_FS
++#include  "uap_headers.h"
++
++/********************************************************
++              Local Variables
++********************************************************/
++
++#define item_size(n) (sizeof ((uap_adapter *)0)->n)
++#define item_addr(n) ((u32) &((uap_adapter *)0)->n)
++
++#define item_dbg_size(n) (sizeof (((uap_adapter *)0)->dbg.n))
++#define item_dbg_addr(n) ((u32) &(((uap_adapter *)0)->dbg.n))
++
++#define item_dev_size(n) (sizeof ((uap_dev_t *)0)->n)
++#define item_dev_addr(n) ((u32) &((uap_dev_t *)0)->n)
++
++/** MicroAp device offset */
++#define OFFSET_UAP_DEV                0x01
++/** Bluetooth adapter offset */
++#define OFFSET_UAP_ADAPTER    0x02
++
++struct debug_data
++{
++    /** Name */
++    char name[32];
++    /** Size */
++    u32 size;
++    /** Address */
++    u32 addr;
++    /** Offset */
++    u32 offset;
++    /** Flag */
++    u32 flag;
++};
++
++/* To debug any member of uap_adapter, simply add one line here.
++ */
++static struct debug_data items[] = {
++    {"cmd_sent", item_dev_size(cmd_sent), 0, item_dev_addr(cmd_sent),
++     OFFSET_UAP_DEV},
++    {"data_sent", item_dev_size(data_sent), 0, item_dev_addr(data_sent),
++     OFFSET_UAP_DEV},
++    {"IntCounter", item_size(IntCounter), 0, item_addr(IntCounter),
++     OFFSET_UAP_ADAPTER},
++    {"cmd_pending", item_size(cmd_pending), 0, item_addr(cmd_pending),
++     OFFSET_UAP_ADAPTER},
++    {"num_cmd_h2c_fail", item_dbg_size(num_cmd_host_to_card_failure), 0,
++     item_dbg_addr(num_cmd_host_to_card_failure), OFFSET_UAP_ADAPTER},
++    {"num_tx_h2c_fail", item_dbg_size(num_tx_host_to_card_failure), 0,
++     item_dbg_addr(num_tx_host_to_card_failure), OFFSET_UAP_ADAPTER},
++    {"psmode", item_size(psmode), 0, item_addr(psmode), OFFSET_UAP_ADAPTER},
++    {"ps_state", item_size(ps_state), 0, item_addr(ps_state),
++     OFFSET_UAP_ADAPTER},
++#ifdef DEBUG_LEVEL1
++    {"drvdbg", sizeof(drvdbg), (u32) & drvdbg, 0, 0}
++#endif
++};
++
++static int num_of_items = sizeof(items) / sizeof(items[0]);
++
++/********************************************************
++              Global Variables
++********************************************************/
++
++/********************************************************
++              Local Functions
++********************************************************/
++/**
++ *  @brief proc read function
++ *
++ *  @param page          pointer to buffer
++ *  @param s       read data starting position
++ *  @param off     offset
++ *  @param cnt     counter
++ *  @param eof     end of file flag
++ *  @param data    data to output
++ *  @return      number of output data
++ */
++static int uap_debug_proc_show(struct seq_file *s, void *data) {
++    int val = 0;
++    int i;
++
++    struct debug_data *d = (struct debug_data *)s->private;
++
++    if (MODULE_GET == 0)
++        return UAP_STATUS_FAILURE;
++
++    for (i = 0; i < num_of_items; i++) {
++        if (d[i].size == 1)
++            val = *((u8 *) d[i].addr);
++        else if (d[i].size == 2)
++            val = *((u16 *) d[i].addr);
++        else if (d[i].size == 4)
++            val = *((u32 *) d[i].addr);
++
++        seq_printf(s, "%s=%d\n", d[i].name, val);
++    }
++    MODULE_PUT;
++    return 0;
++}
++
++static int uap_debug_proc_open(struct inode* inode, struct file* file) {
++      return single_open(file, uap_debug_proc_show, PDE_DATA(inode));
++}
++
++/**
++ *  @brief proc write function
++ *
++ *  @param f     file pointer
++ *  @param buf     pointer to data buffer
++ *  @param cnt     data number to write
++ *  @param data    data to write
++ *  @return      number of data
++ */
++static ssize_t uap_debug_proc_write(struct file *f, const char __user *buf, size_t cnt, loff_t *data) {
++    int r, i;
++    char *pdata;
++    char *p;
++    char *p0;
++    char *p1;
++    char *p2;
++    struct debug_data *d = (struct debug_data *)PDE_DATA(file_inode(f));
++
++    if (MODULE_GET == 0)
++        return UAP_STATUS_FAILURE;
++
++    pdata = (char *) kmalloc(cnt, GFP_KERNEL);
++    if (pdata == NULL) {
++        MODULE_PUT;
++        return 0;
++    }
++
++    if (copy_from_user(pdata, buf, cnt)) {
++        PRINTM(INFO, "Copy from user failed\n");
++        kfree(pdata);
++        MODULE_PUT;
++        return 0;
++    }
++
++    p0 = pdata;
++    for (i = 0; i < num_of_items; i++) {
++        do {
++            p = strstr(p0, d[i].name);
++            if (p == NULL)
++                break;
++            p1 = strchr(p, '\n');
++            if (p1 == NULL)
++                break;
++            p0 = p1++;
++            p2 = strchr(p, '=');
++            if (!p2)
++                break;
++            p2++;
++            r = string_to_number(p2);
++            if (d[i].size == 1)
++                *((u8 *) d[i].addr) = (u8) r;
++            else if (d[i].size == 2)
++                *((u16 *) d[i].addr) = (u16) r;
++            else if (d[i].size == 4)
++                *((u32 *) d[i].addr) = (u32) r;
++            break;
++        } while (TRUE);
++    }
++    kfree(pdata);
++#ifdef DEBUG_LEVEL1
++    printk(KERN_ALERT "drvdbg = 0x%x\n", drvdbg);
++    printk(KERN_ALERT "INFO  (%08lx) %s\n", DBG_INFO,
++           (drvdbg & DBG_INFO) ? "X" : "");
++    printk(KERN_ALERT "WARN  (%08lx) %s\n", DBG_WARN,
++           (drvdbg & DBG_WARN) ? "X" : "");
++    printk(KERN_ALERT "ENTRY (%08lx) %s\n", DBG_ENTRY,
++           (drvdbg & DBG_ENTRY) ? "X" : "");
++    printk(KERN_ALERT "CMD_D (%08lx) %s\n", DBG_CMD_D,
++           (drvdbg & DBG_CMD_D) ? "X" : "");
++    printk(KERN_ALERT "DAT_D (%08lx) %s\n", DBG_DAT_D,
++           (drvdbg & DBG_DAT_D) ? "X" : "");
++    printk(KERN_ALERT "CMND  (%08lx) %s\n", DBG_CMND,
++           (drvdbg & DBG_CMND) ? "X" : "");
++    printk(KERN_ALERT "DATA  (%08lx) %s\n", DBG_DATA,
++           (drvdbg & DBG_DATA) ? "X" : "");
++    printk(KERN_ALERT "ERROR (%08lx) %s\n", DBG_ERROR,
++           (drvdbg & DBG_ERROR) ? "X" : "");
++    printk(KERN_ALERT "FATAL (%08lx) %s\n", DBG_FATAL,
++           (drvdbg & DBG_FATAL) ? "X" : "");
++    printk(KERN_ALERT "MSG   (%08lx) %s\n", DBG_MSG,
++           (drvdbg & DBG_MSG) ? "X" : "");
++#endif
++    MODULE_PUT;
++    return cnt;
++}
++
++static const struct file_operations uap_debug_proc_fops = {
++      .owner   = THIS_MODULE,
++      .open    = uap_debug_proc_open,
++      .read    = seq_read,
++      .llseek  = seq_lseek,
++      .release = single_release,
++      .write   = uap_debug_proc_write,
++};
++
++/********************************************************
++              Global Functions
++********************************************************/
++/**
++ *  @brief create debug proc file
++ *
++ *  @param priv          pointer uap_private
++ *  @param dev     pointer net_device
++ *  @return      N/A
++ */
++void
++uap_debug_entry(uap_private * priv, struct net_device *dev)
++{
++    int i;
++
++    if (priv->proc_entry == NULL)
++        return;
++
++    for (i = 0; i < num_of_items; i++) {
++        if (items[i].flag & OFFSET_UAP_ADAPTER)
++            items[i].addr = items[i].offset + (u32) priv->adapter;
++        if (items[i].flag & OFFSET_UAP_DEV)
++            items[i].addr = items[i].offset + (u32) & priv->uap_dev;
++    }
++    proc_create_data("debug", 0644, priv->proc_entry, &uap_debug_proc_fops,
++      &items[0]);
++}
++
++/**
++ *  @brief remove proc file
++ *
++ *  @param priv          pointer uap_private
++ *  @return      N/A
++ */
++void
++uap_debug_remove(uap_private * priv)
++{
++    remove_proc_entry("debug", priv->proc_entry);
++}
++
++#endif
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/libertas_uap/uap_drv.h backports-3.18.1-1/drivers/net/wireless/libertas_uap/uap_drv.h
+--- backports-3.18.1-1.org/drivers/net/wireless/libertas_uap/uap_drv.h 1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/libertas_uap/uap_drv.h     2014-12-29 20:37:43.949097590 +0100
+@@ -0,0 +1,667 @@
++/** @file uap_drv.h
++  * @brief This file contains Linux OS related definitions and
++  * declarations, uAP driver
++  *
++  * Copyright (C) 2008-2009, Marvell International Ltd.
++  *
++  * This software file (the "File") is distributed by Marvell International
++  * Ltd. under the terms of the GNU General Public License Version 2, June 1991
++  * (the "License").  You may use, redistribute and/or modify this File in
++  * accordance with the terms and conditions of the License, a copy of which
++  * is available along with the File in the gpl.txt file or by writing to
++  * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++  * 02111-1307 or on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
++  *
++  * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
++  * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
++  * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
++  * this warranty disclaimer.
++  *
++  */
++
++#ifndef _UAP_DRV_H
++#define _UAP_DRV_H
++
++/** Driver release version */
++#define DRIVER_VERSION                "26146"
++
++/** True */
++#ifndef       TRUE
++#define TRUE                  1
++#endif
++/** False */
++#ifndef       FALSE
++#define       FALSE                   0
++#endif
++
++/** Bit definitions */
++#ifndef BIT
++#define BIT(x)        (1UL << (x))
++#endif
++
++/** Dma addresses are 32-bits wide.  */
++#ifndef __ATTRIB_ALIGN__
++#define __ATTRIB_ALIGN__ __attribute__((aligned(4)))
++#endif
++
++/**  attribute pack */
++#ifndef __ATTRIB_PACK__
++#define __ATTRIB_PACK__ __attribute__ ((packed))
++#endif
++
++/** Debug Macro definition*/
++#ifdef        DEBUG_LEVEL1
++
++extern u32 drvdbg;
++
++/** Debug message control bit definition for drvdbg */
++/** Debug message */
++#define       DBG_MSG         BIT(0)
++/** Debug fatal message */
++#define DBG_FATAL     BIT(1)
++/** Debug error message */
++#define DBG_ERROR     BIT(2)
++/** Debug data message */
++#define DBG_DATA      BIT(3)
++/** Debug command message */
++#define DBG_CMND      BIT(4)
++
++/** Debug data */
++#define DBG_DAT_D     BIT(16)
++/** Debug command */
++#define DBG_CMD_D     BIT(17)
++
++/** Debug entry */
++#define DBG_ENTRY     BIT(28)
++/** Debug warning */
++#define DBG_WARN      BIT(29)
++/** Debug info */
++#define DBG_INFO      BIT(30)
++
++/** Print info */
++#define       PRINTM_INFO(msg...)  {if (drvdbg & DBG_INFO) printk(KERN_DEBUG msg);}
++/** Print warn message */
++#define       PRINTM_WARN(msg...)  {if (drvdbg & DBG_WARN) printk(KERN_DEBUG msg);}
++/** Print entry */
++#define       PRINTM_ENTRY(msg...) {if (drvdbg & DBG_ENTRY) printk(KERN_DEBUG msg);}
++/** Print cmd_d */
++#define       PRINTM_CMD_D(msg...) {if (drvdbg & DBG_CMD_D) printk(KERN_DEBUG msg);}
++/** Print data_d */
++#define       PRINTM_DAT_D(msg...) {if (drvdbg & DBG_DAT_D) printk(KERN_DEBUG msg);}
++/** Print command */
++#define       PRINTM_CMND(msg...)  {if (drvdbg & DBG_CMND) printk(KERN_DEBUG msg);}
++/** Print data */
++#define       PRINTM_DATA(msg...)  {if (drvdbg & DBG_DATA) printk(KERN_DEBUG msg);}
++/** Print error message */
++#define       PRINTM_ERROR(msg...) {if (drvdbg & DBG_ERROR) printk(KERN_DEBUG msg);}
++/** Print fatal message */
++#define       PRINTM_FATAL(msg...) {if (drvdbg & DBG_FATAL) printk(KERN_DEBUG msg);}
++/** Print message */
++#define       PRINTM_MSG(msg...)   {if (drvdbg & DBG_MSG) printk(KERN_ALERT msg);}
++/** Print level */
++#define       PRINTM(level,msg...) PRINTM_##level(msg)
++
++#else
++
++#define       PRINTM(level,msg...) do {} while (0)
++
++#endif /* DEBUG_LEVEL1 */
++
++/** Wait until a condition becomes true */
++#define ASSERT(cond)                                          \
++do {                                                          \
++      if (!(cond))                                            \
++              PRINTM(INFO, "ASSERT: %s, %s:%i\n",             \
++                     __FUNCTION__, __FILE__, __LINE__);       \
++} while(0)
++
++/** Log enrty point for debugging */
++#define       ENTER()                 PRINTM(ENTRY, "Enter: %s, %s:%i\n", __FUNCTION__, \
++                                                      __FILE__, __LINE__)
++/** Log exit point for debugging */
++#define       LEAVE()                 PRINTM(ENTRY, "Leave: %s, %s:%i\n", __FUNCTION__, \
++                                                      __FILE__, __LINE__)
++
++#ifdef        DEBUG_LEVEL1
++/** Dump buffer length */
++#define DBG_DUMP_BUF_LEN    64
++/** Maximum dump per line */
++#define MAX_DUMP_PER_LINE   16
++/** Data dump length */
++#define DATA_DUMP_LEN       32
++
++static inline void
++hexdump(char *prompt, u8 * buf, int len)
++{
++    int i;
++    char dbgdumpbuf[DBG_DUMP_BUF_LEN];
++    char *ptr = dbgdumpbuf;
++
++    printk(KERN_DEBUG "%s:\n", prompt);
++    for (i = 1; i <= len; i++) {
++        ptr += sprintf(ptr, "%02x ", *buf);
++        buf++;
++        if (i % MAX_DUMP_PER_LINE == 0) {
++            *ptr = 0;
++            printk(KERN_DEBUG "%s\n", dbgdumpbuf);
++            ptr = dbgdumpbuf;
++        }
++    }
++    if (len % MAX_DUMP_PER_LINE) {
++        *ptr = 0;
++        printk(KERN_DEBUG "%s\n", dbgdumpbuf);
++    }
++}
++
++/** Debug command */
++#define DBG_HEXDUMP_CMD_D(x,y,z)    {if (drvdbg & DBG_CMD_D) hexdump(x,y,z);}
++/** Debug data */
++#define DBG_HEXDUMP_DAT_D(x,y,z)    {if (drvdbg & DBG_DAT_D) hexdump(x,y,z);}
++/** Debug hexdump */
++#define       DBG_HEXDUMP(level,x,y,z)    DBG_HEXDUMP_##level(x,y,z)
++/** hexdump */
++#define HEXDUMP(x,y,z)              {if (drvdbg & DBG_INFO) hexdump(x,y,z);}
++#else
++/** Do nothing since debugging is not turned on */
++#define DBG_HEXDUMP(level,x,y,z)    do {} while (0)
++/** Do nothing since debugging is not turned on */
++#define HEXDUMP(x,y,z)              do {} while (0)
++#endif
++
++/**
++ * Typedefs
++ */
++/** Unsigned char */
++typedef u8 BOOLEAN;
++
++/*
++ * OS macro definitions
++ */
++/** OS macro to get time */
++#define os_time_get() jiffies
++
++/** OS macro to update transfer start time */
++#define UpdateTransStart(dev) { \
++      dev->trans_start = jiffies; \
++}
++
++/** Try to get a reference to the module */
++#define MODULE_GET    try_module_get(THIS_MODULE)
++/** Decrease module reference count */
++#define MODULE_PUT    module_put(THIS_MODULE)
++
++/** OS macro to initialize semaphore */
++#define OS_INIT_SEMAPHORE(x)  sema_init(x,1)
++/** OS macro to acquire blocking semaphore */
++#define OS_ACQ_SEMAPHORE_BLOCK(x)     down_interruptible(x)
++/** OS macro to acquire non-blocking semaphore */
++#define OS_ACQ_SEMAPHORE_NOBLOCK(x)   down_trylock(x)
++/** OS macro to release semaphore */
++#define OS_REL_SEMAPHORE(x)           up(x)
++
++static inline void
++os_sched_timeout(u32 millisec)
++{
++    set_current_state(TASK_INTERRUPTIBLE);
++    schedule_timeout((millisec * HZ) / 1000);
++}
++
++/** Maximum size of ethernet packet */
++#define MRVDRV_MAXIMUM_ETH_PACKET_SIZE        1514
++
++/** Maximum size of multicast list */
++#define MRVDRV_MAX_MULTICAST_LIST_SIZE        32
++
++/** Find minimum */
++#ifndef MIN
++#define MIN(a,b)              ((a) < (b) ? (a) : (b))
++#endif
++
++/** Find maximum */
++#ifndef MAX
++#define MAX(a,b)              ((a) > (b) ? (a) : (b))
++#endif
++
++/** Find number of elements */
++#ifndef NELEMENTS
++#define NELEMENTS(x) (sizeof(x)/sizeof(x[0]))
++#endif
++
++/** Buffer Constants */
++
++/** Size of command buffer */
++#define MRVDRV_SIZE_OF_CMD_BUFFER       (2 * 1024)
++
++/** Length of device length */
++#define DEV_NAME_LEN                  32
++
++/** Length of ethernet address */
++#ifndef       ETH_ALEN
++#define ETH_ALEN                      6
++#endif
++
++/** Default watchdog timeout */
++#define MRVDRV_DEFAULT_WATCHDOG_TIMEOUT (2 * HZ)
++
++/** Success */
++#define UAP_STATUS_SUCCESS         (0)
++/** Failure */
++#define UAP_STATUS_FAILURE         (-1)
++/** Not accepted */
++#define UAP_STATUS_NOT_ACCEPTED    (-2)
++
++/** Max loop count (* 100ms) for waiting device ready at init time */
++#define MAX_WAIT_DEVICE_READY_COUNT   50
++
++/** Tx high watermark. Stop Tx queue after this is crossed */
++#define TX_HIGH_WATERMARK   4
++/** Tx low watermark. Restart Tx queue after this is crossed */
++#define TX_LOW_WATERMARK    2
++
++/** Netlink protocol number */
++#define NETLINK_MARVELL     (MAX_LINKS - 1)
++/** Netlink maximum payload size */
++#define NL_MAX_PAYLOAD      1024
++/** Netlink multicast group number */
++#define NL_MULTICAST_GROUP  1
++
++/** 20 seconds */
++#define MRVDRV_TIMER_20S              20000
++
++/** Host Command option for wait till Send */
++#define HostCmd_OPTION_WAITFORSEND            0x0001
++/** Host Command option for wait for RSP */
++#define HostCmd_OPTION_WAITFORRSP             0x0002
++/** Host Command option for wait for RSP or Timeout */
++#define HostCmd_OPTION_WAITFORRSP_TIMEOUT     0x0003
++/** Host Command option for wait for RSP of sleep confirm */
++#define HostCmd_OPTION_WAITFORRSP_SLEEPCONFIRM   0x0004
++
++/** Sleep until a condition gets true or a timeout elapses */
++#define os_wait_interruptible_timeout(waitq, cond, timeout) \
++      wait_event_interruptible_timeout(waitq, cond, ((timeout) * HZ / 1000))
++
++/** Private command ID to Host command */
++#define       UAPHOSTCMD                      (SIOCDEVPRIVATE + 1)
++
++/** Private command ID to Power Mode */
++#define       UAP_POWER_MODE                  (SIOCDEVPRIVATE + 3)
++/** sleep_param */
++typedef struct _ps_sleep_param
++{
++    /** control bitmap */
++    u32 ctrl_bitmap;
++    /** minimum sleep period (micro second) */
++    u32 min_sleep;
++    /** maximum sleep period (micro second) */
++    u32 max_sleep;
++} ps_sleep_param;
++
++/** inactivity sleep_param */
++typedef struct _inact_sleep_param
++{
++    /** inactivity timeout (micro second) */
++    u32 inactivity_to;
++    /** miniumu awake period (micro second) */
++    u32 min_awake;
++    /** maximum awake period (micro second) */
++    u32 max_awake;
++} inact_sleep_param;
++
++/** flag for ps mode */
++#define PS_FLAG_PS_MODE                 1
++/** flag for sleep param */
++#define PS_FLAG_SLEEP_PARAM             2
++/** flag for inactivity sleep param */
++#define PS_FLAG_INACT_SLEEP_PARAM       4
++
++/** Disable power mode */
++#define PS_MODE_DISABLE                      0
++/** Enable periodic dtim ps */
++#define PS_MODE_PERIODIC_DTIM                1
++/** Enable inactivity ps */
++#define PS_MODE_INACTIVITY                   2
++
++/** sleep parameter */
++#define SLEEP_PARAMETER                     1
++/** inactivity sleep parameter */
++#define INACTIVITY_SLEEP_PARAMETER          2
++/** ps_mgmt */
++typedef struct _ps_mgmt
++{
++    /** flags for valid field */
++    u16 flags;
++    /** power mode */
++    u16 ps_mode;
++    /** sleep param */
++    ps_sleep_param sleep_param;
++    /** inactivity sleep param */
++    inact_sleep_param inact_param;
++} ps_mgmt;
++
++/** Semaphore structure */
++typedef struct semaphore SEMAPHORE;
++
++/** Global Varibale Declaration */
++/** Private data structure of the device */
++typedef struct _uap_private uap_private;
++/** Adapter data structure of the device */
++typedef struct _uap_adapter uap_adapter;
++/** private structure */
++extern uap_private *uappriv;
++
++/** ENUM definition*/
++
++/** Hardware status codes */
++typedef enum _HARDWARE_STATUS
++{
++    HWReady,
++    HWInitializing,
++    HWReset,
++    HWClosing,
++    HWNotReady
++} HARDWARE_STATUS;
++
++/** info for debug purpose */
++typedef struct _uap_dbg
++{
++        /** Number of host to card command failures */
++    u32 num_cmd_host_to_card_failure;
++        /** Number of host to card Tx failures */
++    u32 num_tx_host_to_card_failure;
++} uap_dbg;
++
++/** Set thread state */
++#define OS_SET_THREAD_STATE(x)                set_current_state(x)
++
++typedef struct
++{
++    /** Task */
++    struct task_struct *task;
++    /** Queue */
++    wait_queue_head_t waitQ;
++    /** PID */
++    pid_t pid;
++    /** Private structure */
++    void *priv;
++} uap_thread;
++
++static inline void
++uap_activate_thread(uap_thread * thr)
++{
++        /** Record the thread pid */
++    thr->pid = current->pid;
++
++        /** Initialize the wait queue */
++    init_waitqueue_head(&thr->waitQ);
++}
++
++static inline void
++uap_deactivate_thread(uap_thread * thr)
++{
++    thr->pid = 0;
++    return;
++}
++
++static inline void
++uap_create_thread(int (*uapfunc) (void *), uap_thread * thr, char *name)
++{
++    thr->task = kthread_run(uapfunc, thr, "%s", name);
++}
++
++static inline int
++uap_terminate_thread(uap_thread * thr)
++{
++    /* Check if the thread is active or not */
++    if (!thr->pid)
++        return -1;
++    kthread_stop(thr->task);
++    return 0;
++}
++
++/** Data structure for the Marvell uAP device */
++typedef struct _uap_dev
++{
++        /** device name */
++    char name[DEV_NAME_LEN];
++        /** card pointer */
++    void *card;
++        /** IO port */
++    u32 ioport;
++        /** Rx unit */
++    u8 rx_unit;
++        /** Data sent:
++          TRUE - Data is sent to fw, no Tx Done received
++          FALSE - Tx done received for previous Tx */
++    BOOLEAN data_sent;
++        /** CMD sent:
++          TRUE - CMD is sent to fw, no CMD Done received
++          FALSE - CMD done received for previous CMD */
++    BOOLEAN cmd_sent;
++        /** netdev pointer */
++    struct net_device *netdev;
++} uap_dev_t, *puap_dev_t;
++
++/** Private structure for the MV device */
++struct _uap_private
++{
++        /** Device open */
++    int open;
++
++        /** Device adapter structure */
++    uap_adapter *adapter;
++        /** Device structure */
++    uap_dev_t uap_dev;
++
++        /** Net device statistics structure */
++    struct net_device_stats stats;
++
++        /** Number of Tx timeouts */
++    u32 num_tx_timeout;
++
++        /** Media connection status */
++    BOOLEAN MediaConnected;
++
++#ifdef CONFIG_PROC_FS
++    struct proc_dir_entry *proc_uap;
++    struct proc_dir_entry *proc_entry;
++#endif                          /* CONFIG_PROC_FS */
++
++        /** Firmware helper */
++    const struct firmware *fw_helper;
++        /** Firmware */
++    const struct firmware *firmware;
++        /** Hotplug device */
++    struct device *hotplug_device;
++        /** thread to service interrupts */
++    uap_thread MainThread;
++        /** Driver lock */
++    spinlock_t driver_lock;
++        /** Driver lock flags */
++    ulong driver_flags;
++
++};
++
++/** PS_CMD_ConfirmSleep */
++typedef struct _PS_CMD_ConfirmSleep
++{
++        /** SDIO Length */
++    u16 SDLen;
++    /** SDIO Type */
++    u16 SDType;
++        /** Command */
++    u16 Command;
++        /** Size */
++    u16 Size;
++        /** Sequence number */
++    u16 SeqNum;
++        /** Result */
++    u16 Result;
++} __ATTRIB_PACK__ PS_CMD_ConfirmSleep, *PPS_CMD_ConfirmSleep;
++
++/** Wlan Adapter data structure*/
++struct _uap_adapter
++{
++        /** Power save confirm sleep command */
++    PS_CMD_ConfirmSleep PSConfirmSleep;
++        /** Device status */
++    HARDWARE_STATUS HardwareStatus;
++        /** Interrupt counter */
++    u32 IntCounter;
++        /** Tx packet queue */
++    struct sk_buff_head tx_queue;
++        /** Cmd packet queue */
++    struct sk_buff_head cmd_queue;
++        /** Command sequence number */
++    u16 SeqNum;
++        /** Command buffer */
++    u8 *CmdBuf;
++        /** cmd pending flag */
++    u8 cmd_pending;
++        /** cmd wait option */
++    u8 cmd_wait_option;
++        /** Command buffer length */
++    u32 CmdSize;
++        /** Command wait queue */
++    wait_queue_head_t cmdwait_q __ATTRIB_ALIGN__;
++        /** Command wait queue state flag */
++    u8 CmdWaitQWoken;
++        /** PnP support */
++    BOOLEAN SurpriseRemoved;
++        /** Debug */
++    uap_dbg dbg;
++        /** Netlink kernel socket */
++    struct sock *nl_sk;
++        /** Semaphore for CMD */
++    SEMAPHORE CmdSem;
++         /** Power Save mode */
++    u8 psmode;
++        /** Power Save state */
++    u8 ps_state;
++        /** Number of wakeup tries */
++    u32 WakeupTries;
++};
++
++static inline int
++os_upload_rx_packet(uap_private * priv, struct sk_buff *skb)
++{
++    skb->dev = priv->uap_dev.netdev;
++    skb->protocol = eth_type_trans(skb, priv->uap_dev.netdev);
++    skb->ip_summed = CHECKSUM_UNNECESSARY;
++    if (in_interrupt())
++        netif_rx(skb);
++    else
++        netif_rx_ni(skb);
++    return 0;
++}
++
++/*
++ *  netif carrier_on/off and start(wake)/stop_queue handling
++ */
++static inline void
++os_carrier_on(uap_private * priv)
++{
++    if (!netif_carrier_ok(priv->uap_dev.netdev) &&
++        (priv->MediaConnected == TRUE)) {
++        netif_carrier_on(priv->uap_dev.netdev);
++    }
++}
++
++static inline void
++os_carrier_off(uap_private * priv)
++{
++    if (netif_carrier_ok(priv->uap_dev.netdev)) {
++        netif_carrier_off(priv->uap_dev.netdev);
++    }
++}
++
++static inline void
++os_start_queue(uap_private * priv)
++{
++    if (netif_queue_stopped(priv->uap_dev.netdev) &&
++        (priv->MediaConnected == TRUE)) {
++        netif_wake_queue(priv->uap_dev.netdev);
++    }
++}
++
++static inline void
++os_stop_queue(uap_private * priv)
++{
++    if (!netif_queue_stopped(priv->uap_dev.netdev)) {
++        netif_stop_queue(priv->uap_dev.netdev);
++    }
++}
++
++/** Interface specific header */
++#define INTF_HEADER_LEN         4
++
++/** headroom alignment for tx packet */
++#define HEADER_ALIGNMENT      8
++
++/** The number of times to try when polling for status bits */
++#define MAX_POLL_TRIES                        100
++
++/** Length of SNAP header */
++#define MRVDRV_SNAP_HEADER_LEN          8
++
++/** Extra length of Tx packet buffer */
++#define EXTRA_LEN     36
++
++/** Buffer size for ethernet Tx packets */
++#define MRVDRV_ETH_TX_PACKET_BUFFER_SIZE \
++      (ETH_FRAME_LEN + sizeof(TxPD) + EXTRA_LEN)
++
++/** Buffer size for ethernet Rx packets */
++#define MRVDRV_ETH_RX_PACKET_BUFFER_SIZE \
++      (ETH_FRAME_LEN + sizeof(RxPD) \
++       + MRVDRV_SNAP_HEADER_LEN + EXTRA_LEN)
++
++/** Packet type: data, command & event */
++typedef enum _mv_type
++{
++    MV_TYPE_DAT = 0,
++    MV_TYPE_CMD = 1,
++    MV_TYPE_EVENT = 3
++} mv_type;
++
++/** Disable interrupt */
++#define OS_INT_DISABLE        spin_lock_irqsave(&priv->driver_lock, priv->driver_flags)
++/** Enable interrupt */
++#define       OS_INT_RESTORE  spin_unlock_irqrestore(&priv->driver_lock, priv->driver_flags)
++
++int uap_process_rx_packet(uap_private * priv, struct sk_buff *skb);
++void uap_interrupt(uap_private * priv);
++uap_private *uap_add_card(void *card);
++int uap_remove_card(void *card);
++int uap_process_event(uap_private * priv, u8 * payload, uint len);
++int uap_soft_reset(uap_private * priv);
++int uap_process_sleep_confirm_resp(uap_private * priv, u8 * resp, int resp_len);
++
++#ifdef CONFIG_PROC_FS
++/** The proc fs interface */
++void uap_proc_entry(uap_private * priv, struct net_device *dev);
++void uap_proc_remove(uap_private * priv);
++int string_to_number(char *s);
++void uap_debug_entry(uap_private * priv, struct net_device *dev);
++void uap_debug_remove(uap_private * priv);
++#endif /* CONFIG_PROC_FS */
++
++int sbi_register(void);
++
++void sbi_unregister(void);
++int sbi_register_dev(uap_private * priv);
++int sbi_unregister_dev(uap_private * priv);
++int sbi_prog_fw_w_helper(uap_private *);
++
++int sbi_host_to_card(uap_private * priv, u8 * payload, u16 nb);
++int sbi_enable_host_int(uap_private * priv);
++int sbi_disable_host_int(uap_private * priv);
++
++int sbi_get_int_status(uap_private * priv, u8 * ireg);
++/** Check firmware status */
++int sbi_check_fw_status(uap_private *, int);
++int sbi_prog_helper(uap_private *);
++
++int sbi_wakeup_firmware(uap_private * priv);
++
++#endif /* _UAP_DRV_H */
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/libertas_uap/uap_fw.h backports-3.18.1-1/drivers/net/wireless/libertas_uap/uap_fw.h
+--- backports-3.18.1-1.org/drivers/net/wireless/libertas_uap/uap_fw.h  1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/libertas_uap/uap_fw.h      2014-12-29 20:37:43.949097590 +0100
+@@ -0,0 +1,359 @@
++/** @file uap_fw.h
++ *
++ * @brief This file contains firmware specific defines.
++ *
++ * Copyright (C) 2008-2009, Marvell International Ltd.
++ *
++ * This software file (the "File") is distributed by Marvell International
++ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
++ * (the "License").  You may use, redistribute and/or modify this File in
++ * accordance with the terms and conditions of the License, a copy of which
++ * is available along with the File in the gpl.txt file or by writing to
++ * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++ * 02111-1307 or on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
++ *
++ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
++ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
++ * this warranty disclaimer.
++ *
++ */
++/********************************************************
++Change log:
++      02/26/08: Initial creation
++********************************************************/
++
++#ifndef _UAP_FW_H
++#define _UAP_FW_H
++
++/** uap upload size */
++#define       UAP_UPLD_SIZE                   2312
++/** Packet type Micro AP */
++#define PKT_TYPE_MICROAP              1
++/** Packet type client */
++#define PKT_TYPE_CLIENT                       0
++
++/** TxPD descriptor */
++typedef struct _TxPD
++{
++        /** Bss Type */
++    u8 BssType;
++        /** Bss num */
++    u8 BssNum;
++        /** Tx packet length */
++    u16 TxPktLength;
++        /** Tx packet offset */
++    u16 TxPktOffset;
++        /** Tx packet type */
++    u16 TxPktType;
++        /** Tx Control */
++    u32 TxControl;
++        /** reserved */
++    u32 reserved[2];
++} __ATTRIB_PACK__ TxPD, *PTxPD;
++
++/** RxPD Descriptor */
++typedef struct _RxPD
++{
++        /** Bss Type */
++    u8 BssType;
++        /** Bss Num */
++    u8 BssNum;
++        /** Tx packet length */
++    u16 RxPktLength;
++        /** Tx packet offset */
++    u16 RxPktOffset;
++} __ATTRIB_PACK__ RxPD, *PRxPD;
++
++#ifdef BIG_ENDIAN
++/** Convert from 16 bit little endian format to CPU format */
++#define uap_le16_to_cpu(x) le16_to_cpu(x)
++/** Convert from 32 bit little endian format to CPU format */
++#define uap_le32_to_cpu(x) le32_to_cpu(x)
++/** Convert from 64 bit little endian format to CPU format */
++#define uap_le64_to_cpu(x) le64_to_cpu(x)
++/** Convert to 16 bit little endian format from CPU format */
++#define uap_cpu_to_le16(x) cpu_to_le16(x)
++/** Convert to 32 bit little endian format from CPU format */
++#define uap_cpu_to_le32(x) cpu_to_le32(x)
++/** Convert to 64 bit little endian format from CPU format */
++#define uap_cpu_to_le64(x) cpu_to_le64(x)
++
++/** Convert TxPD to little endian format from CPU format */
++#define endian_convert_TxPD(x);                                         \
++    {                                                                   \
++        (x)->TxPktLength = uap_cpu_to_le16((x)->TxPktLength);         \
++        (x)->TxPktOffset = uap_cpu_to_le32((x)->TxPktOffset);         \
++        (x)->TxControl = uap_cpu_to_le32((x)->TxControl);              \
++        (x)->TxPktType = uap_cpu_to_le32((x)->TxPktType);             \
++    }
++
++/** Convert RxPD from little endian format to CPU format */
++#define endian_convert_RxPD(x);                                       \
++    {                                                                 \
++        (x)->RxPktLength = uap_le16_to_cpu((x)->RxPktLength);         \
++        (x)->RxPktOffset = uap_le32_to_cpu((x)->RxPktOffset);         \
++    }
++#else /* BIG_ENDIAN */
++/** Do nothing */
++#define uap_le16_to_cpu(x) x
++/** Do nothing */
++#define uap_le32_to_cpu(x) x
++/** Do nothing */
++#define uap_le64_to_cpu(x) x
++/** Do nothing */
++#define uap_cpu_to_le16(x) x
++/** Do nothing */
++#define uap_cpu_to_le32(x) x
++/** Do nothing */
++#define uap_cpu_to_le64(x) x
++
++/** Do nothing */
++#define endian_convert_TxPD(x)
++/** Do nothing */
++#define endian_convert_RxPD(x)
++#endif /* BIG_ENDIAN */
++
++/** Host Command ID : Function initialization */
++#define HostCmd_CMD_FUNC_INIT                 0x00a9
++/** Host Command ID : Function shutdown */
++#define HostCmd_CMD_FUNC_SHUTDOWN             0x00aa
++
++/** Host Command id: SYS_INFO  */
++#define HOST_CMD_APCMD_SYS_INFO               0x00ae
++/** Host Command id: SYS_RESET  */
++#define HOST_CMD_APCMD_SYS_RESET              0x00af
++/** Host Command id: SYS_CONFIGURE  */
++#define HOST_CMD_APCMD_SYS_CONFIGURE          0x00b0
++/** Host Command id: BSS_START  */
++#define HOST_CMD_APCMD_BSS_START              0x00b1
++/** Host Command id: SYS_STOP  */
++#define HOST_CMD_APCMD_BSS_STOP               0x00b2
++/** Host Command id: STA_LIST  */
++#define HOST_CMD_APCMD_STA_LIST               0x00b3
++/** Host Command id: STA_FILTER_TABLE  */
++#define HOST_CMD_APCMD_STA_FILTER_TABLE       0x00b4
++/** Host Command id: STA_DEAUTH  */
++#define HOST_CMD_APCMD_STA_DEAUTH             0x00b5
++/** Host Command id: SOFT_RESET  */
++#define HOST_CMD_APCMD_SOFT_RESET             0x00d5
++/** Host Command id: POWER_MGMT_EXT  */
++#define HOST_CMD_POWER_MGMT_EXT               0x00ef
++/** Host Command id: SLEEP_CONFIRM*/
++#define HOST_CMD_SLEEP_CONFIRM              0x00d8
++
++/** TLV type : SSID */
++#define TLV_TYPE_SSID                         0x0000
++/** TLV type : Rates */
++#define TLV_TYPE_RATES                                0x0001
++/** TLV type : PHY DS */
++#define TLV_TYPE_PHY_DS                               0x0003
++
++/** TLV Id : Base id */
++#define PROPRIETARY_TLV_BASE_ID               0x0100
++/** TLV Id : AP_MAC_ADDRESS */
++#define MRVL_AP_MAC_ADDRESS_TLV_ID      (PROPRIETARY_TLV_BASE_ID + 43)
++/** TLV Id : Beacon period */
++#define MRVL_BEACON_PERIOD_TLV_ID       (PROPRIETARY_TLV_BASE_ID + 44)
++/** TLV Id : Dtim period */
++#define MRVL_DTIM_PERIOD_TLV_ID         (PROPRIETARY_TLV_BASE_ID + 45)
++/** TLV Id : Basic rates */
++#define MRVL_BASIC_RATES_TLV_ID         (PROPRIETARY_TLV_BASE_ID + 46)
++/** TLV Id : Tx Power */
++#define MRVL_TX_POWER_TLV_ID            (PROPRIETARY_TLV_BASE_ID + 47)
++/** TLV Id : Broadcast SSID control */
++#define MRVL_BCAST_SSID_CTL_TLV_ID      (PROPRIETARY_TLV_BASE_ID + 48)
++/** TLV Id : Preamble control */
++#define MRVL_PREAMBLE_CTL_TLV_ID        (PROPRIETARY_TLV_BASE_ID + 49)
++/** TLV Id : Antenna control */
++#define MRVL_ANTENNA_CTL_TLV_ID         (PROPRIETARY_TLV_BASE_ID + 50)
++/** TLV Id : RTS threshold */
++#define MRVL_RTS_THRESHOLD_TLV_ID       (PROPRIETARY_TLV_BASE_ID + 51)
++/** TLV Id : Radio control */
++#define MRVL_RADIO_CTL_TLV_ID           (PROPRIETARY_TLV_BASE_ID + 52)
++/** TLV Id : TX data rate */
++#define MRVL_TX_DATA_RATE_TLV_ID        (PROPRIETARY_TLV_BASE_ID + 53)
++/** TLV Id : Packet forward control */
++#define MRVL_PKT_FWD_CTL_TLV_ID         (PROPRIETARY_TLV_BASE_ID + 54)
++/** TLV Id : STA info */
++#define MRVL_STA_INFO_TLV_ID            (PROPRIETARY_TLV_BASE_ID + 55)
++/** TLV Id : STA MAC address filter */
++#define MRVL_STA_MAC_ADDR_FILTER_TLV_ID (PROPRIETARY_TLV_BASE_ID + 56)
++/** TLV Id : STA ageout timer */
++#define MRVL_STA_AGEOUT_TIMER_TLV_ID    (PROPRIETARY_TLV_BASE_ID + 57)
++/** TLV Id : Security config */
++#define MRVL_SECURITY_CFG_TLV_ID        (PROPRIETARY_TLV_BASE_ID + 58)
++/** TLV Id : WEP KEY */
++#define MRVL_WEP_KEY_TLV_ID             (PROPRIETARY_TLV_BASE_ID + 59)
++/** TLV Id : WPA Passphrase */
++#define MRVL_WPA_PASSPHRASE_TLV_ID      (PROPRIETARY_TLV_BASE_ID + 60)
++
++/** Action get */
++#define ACTION_GET    0
++/** Action set */
++#define ACTION_SET    1
++/** Length of ethernet address */
++#ifndef       ETH_ALEN
++#define ETH_ALEN                      6
++#endif
++
++/** HostCmd_DS_GEN */
++typedef struct
++{
++    /** Command */
++    u16 Command;
++    /** Size */
++    u16 Size;
++    /** Sequence number */
++    u16 SeqNum;
++    /** Result */
++    u16 Result;
++} __ATTRIB_PACK__ HostCmd_DS_GEN;
++
++/** Size of HostCmd_DS_GEN */
++#define S_DS_GEN    sizeof(HostCmd_DS_GEN)
++
++/** _HostCmd_HEADER*/
++typedef struct
++{
++    /** Command Header : Command */
++    u16 Command;
++    /** Command Header : Size */
++    u16 Size;
++} __ATTRIB_PACK__ HostCmd_HEADER;
++
++/** HostCmd_SYS_CONFIG */
++typedef struct _HostCmd_SYS_CONFIG
++{
++        /** CMD Action GET/SET*/
++    u16 Action;
++        /** Tlv buffer */
++    u8 TlvBuffer[0];
++} __ATTRIB_PACK__ HostCmd_SYS_CONFIG;
++
++/** HostCmd_DS_POWER_MGMT_EXT */
++typedef struct _HostCmd_DS_POWER_MGMT_EXT
++{
++    /** CMD Action Get/Set*/
++    u16 action;
++    /** power mode */
++    u16 power_mode;
++} __ATTRIB_PACK__ HostCmd_DS_POWER_MGMT_EXT;
++
++/** _HostCmd_DS_COMMAND*/
++typedef struct _HostCmd_DS_COMMAND
++{
++
++        /** Command Header : Command */
++    u16 Command;
++        /** Command Header : Size */
++    u16 Size;
++        /** Command Header : Sequence number */
++    u16 SeqNum;
++        /** Command Header : Result */
++    u16 Result;
++        /** Command Body */
++    union
++    {
++        HostCmd_SYS_CONFIG sys_config;
++        HostCmd_DS_POWER_MGMT_EXT pm_cfg;
++
++    } params;
++} __ATTRIB_PACK__ HostCmd_DS_COMMAND;
++
++/** MrvlIEtypesHeader_*/
++typedef struct _MrvlIEtypesHeader
++{
++    /** Header type */
++    u16 Type;
++    /** Header length */
++    u16 Len;
++} __ATTRIB_PACK__ MrvlIEtypesHeader_t;
++
++/** MrvlIEtypes_Data_t */
++typedef struct _MrvlIEtypes_Data_t
++{
++    /** Header */
++    MrvlIEtypesHeader_t Header;
++    /** Data */
++    u8 Data[1];
++} __ATTRIB_PACK__ MrvlIEtypes_Data_t;
++
++/** MrvlIEtypes_ChanListParamSet_t */
++typedef struct _MrvlIEtypes_MacAddr_t
++{
++    /** Header */
++    MrvlIEtypesHeader_t Header;
++    /** AP MAC address */
++    u8 ApMacAddr[ETH_ALEN];
++} __ATTRIB_PACK__ MrvlIEtypes_MacAddr_t;
++
++/** Event ID: BSS started */
++#define MICRO_AP_EV_ID_BSS_START    46
++
++/** Event ID: BSS idle event */
++#define MICRO_AP_EV_BSS_IDLE       67
++
++/** Event ID: BSS active event */
++#define MICRO_AP_EV_BSS_ACTIVE             68
++
++/** Event ID: PS_AWAKE */
++#define EVENT_PS_AWAKE     0x0a
++
++/** Event ID: PS_SLEEP */
++#define EVENT_PS_SLEEP     0x0b
++
++/** PS_STATE */
++typedef enum _PS_STATE
++{
++    PS_STATE_AWAKE,
++    PS_STATE_PRE_SLEEP,
++    PS_STATE_SLEEP
++} PS_STATE;
++
++/** TLV type: AP Sleep param */
++#define TLV_TYPE_AP_SLEEP_PARAM         (PROPRIETARY_TLV_BASE_ID + 106)
++/** TLV type: AP Inactivity Sleep param */
++#define TLV_TYPE_AP_INACT_SLEEP_PARAM   (PROPRIETARY_TLV_BASE_ID + 107)
++
++/** MrvlIEtypes_sleep_param_t */
++typedef struct _MrvlIEtypes_sleep_param_t
++{
++    /** Header */
++    MrvlIEtypesHeader_t header;
++    /** control bitmap */
++    u32 ctrl_bitmap;
++    /** min_sleep */
++    u32 min_sleep;
++    /** max_sleep */
++    u32 max_sleep;
++} __ATTRIB_PACK__ MrvlIEtypes_sleep_param_t;
++
++/** MrvlIEtypes_inact_sleep_param_t */
++typedef struct _MrvlIEtypes_inact_sleep_param_t
++{
++    /** Header */
++    MrvlIEtypesHeader_t header;
++    /** inactivity timeout */
++    u32 inactivity_to;
++    /** min_awake */
++    u32 min_awake;
++    /** max_awake */
++    u32 max_awake;
++} __ATTRIB_PACK__ MrvlIEtypes_inact_sleep_param_t;
++
++/** AP_Event */
++typedef struct _AP_Event
++{
++    /** Event ID */
++    u32 EventId;
++    /*
++     * Reserved for STA_ASSOCIATED event and contains
++     * status information for the MIC_COUNTERMEASURES event.
++     */
++    /** Reserved/status */
++    u16 status;
++    /** AP MAC address */
++    u8 MacAddr[ETH_ALEN];
++} __ATTRIB_PACK__ AP_Event;
++#endif /* _UAP_FW_H */
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/libertas_uap/uap_headers.h backports-3.18.1-1/drivers/net/wireless/libertas_uap/uap_headers.h
+--- backports-3.18.1-1.org/drivers/net/wireless/libertas_uap/uap_headers.h     1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/libertas_uap/uap_headers.h 2014-12-29 20:37:43.949097590 +0100
+@@ -0,0 +1,64 @@
++/** @file uap_headers.h
++ *
++ * @brief This file contains all the necessary include file.
++ *
++  * Copyright (C) 2008-2009, Marvell International Ltd.
++ *
++ * This software file (the "File") is distributed by Marvell International
++ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
++ * (the "License").  You may use, redistribute and/or modify this File in
++ * accordance with the terms and conditions of the License, a copy of which
++ * is available along with the File in the gpl.txt file or by writing to
++ * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++ * 02111-1307 or on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
++ *
++ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
++ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
++ * this warranty disclaimer.
++ *
++ */
++#ifndef _UAP_HEADERS_H
++#define _UAP_HEADERS_H
++
++/* Linux header files */
++#include    <linux/kernel.h>
++#include    <linux/module.h>
++#include    <linux/init.h>
++#include    <linux/version.h>
++#include    <linux/param.h>
++#include    <linux/types.h>
++#include    <linux/interrupt.h>
++#include    <linux/proc_fs.h>
++#include    <linux/kthread.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
++#include    <linux/semaphore.h>
++#else
++#include    <asm/semaphore.h>
++#endif
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
++#include    <linux/config.h>
++#endif
++
++/* Net header files */
++#include    <linux/netdevice.h>
++#include    <linux/net.h>
++#include    <linux/skbuff.h>
++#include    <linux/if_ether.h>
++#include    <linux/etherdevice.h>
++#include    <net/sock.h>
++#include    <linux/netlink.h>
++#include    <linux/firmware.h>
++#include    <linux/delay.h>
++
++#include    "uap_drv.h"
++#include    "uap_fw.h"
++
++#include <linux/mmc/sdio.h>
++#include <linux/mmc/sdio_ids.h>
++#include <linux/mmc/sdio_func.h>
++#include <linux/mmc/card.h>
++#include "uap_sdio_mmc.h"
++
++#endif /* _UAP_HEADERS_H */
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/libertas_uap/uap_main.c backports-3.18.1-1/drivers/net/wireless/libertas_uap/uap_main.c
+--- backports-3.18.1-1.org/drivers/net/wireless/libertas_uap/uap_main.c        1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/libertas_uap/uap_main.c    2014-12-29 20:37:43.952431125 +0100
+@@ -0,0 +1,1817 @@
++/** @file uap_main.c
++  * @brief This file contains the major functions in uAP
++  * driver. It includes init, exit etc..
++  * This file also contains the initialization for SW,
++  * FW and HW
++  *
++  * Copyright (C) 2008-2009, Marvell International Ltd.
++  *
++  * This software file (the "File") is distributed by Marvell International
++  * Ltd. under the terms of the GNU General Public License Version 2, June 1991
++  * (the "License").  You may use, redistribute and/or modify this File in
++  * accordance with the terms and conditions of the License, a copy of which
++  * is available along with the File in the gpl.txt file or by writing to
++  * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++  * 02111-1307 or on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
++  *
++  * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
++  * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
++  * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
++  * this warranty disclaimer.
++  *
++  */
++/**
++  * @mainpage uAP Linux Driver
++  *
++  * @section overview_sec Overview
++  *
++  * This is Linux reference driver for Marvell uAP.
++  *
++  * @section copyright_sec Copyright
++  *
++  * Copyright (C) 2008, Marvell International Ltd.
++  *
++  */
++
++#include      "uap_headers.h"
++
++/**
++ * the global variable of a pointer to uap_private
++ * structure variable
++ */
++uap_private *uappriv = NULL;
++#ifdef DEBUG_LEVEL1
++#define DEFAULT_DEBUG_MASK    (DBG_MSG | DBG_FATAL | DBG_ERROR)
++u32 drvdbg = DEFAULT_DEBUG_MASK;
++#endif
++/** Helper name */
++char *helper_name = NULL;
++/** Firmware name */
++char *fw_name = NULL;
++
++/** Semaphore for add/remove card */
++SEMAPHORE AddRemoveCardSem;
++
++/********************************************************
++              Local Functions
++********************************************************/
++/**
++ *  @brief This function send sleep confirm command to firmware
++ *
++ *  @param priv       A pointer to uap_private structure
++ *  @return      UAP_STATUS_SUCCESS for success otherwise UAP_STATUS_FAILURE
++ */
++static int
++uap_dnld_sleep_confirm_cmd(uap_private * priv)
++{
++    uap_adapter *Adapter = priv->adapter;
++    int ret = UAP_STATUS_SUCCESS;
++    ENTER();
++    PRINTM(CMND, "Sleep confirm\n");
++    Adapter->cmd_pending = TRUE;
++    Adapter->cmd_wait_option = HostCmd_OPTION_WAITFORRSP_SLEEPCONFIRM;
++    ret =
++        sbi_host_to_card(priv, (u8 *) & Adapter->PSConfirmSleep,
++                         sizeof(PS_CMD_ConfirmSleep));
++    if (ret != UAP_STATUS_SUCCESS) {
++        Adapter->ps_state = PS_STATE_AWAKE;
++        Adapter->cmd_pending = FALSE;
++        Adapter->cmd_wait_option = FALSE;
++    }
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function process sleep confirm resp from firmware
++ *
++ *  @param priv       A pointer to uap_private structure
++ *  @param resp       A pointer to resp buf
++ *  @param resp_len   resp buf len
++ *  @return      UAP_STATUS_SUCCESS for success otherwise UAP_STATUS_FAILURE
++ */
++int
++uap_process_sleep_confirm_resp(uap_private * priv, u8 * resp, int resp_len)
++{
++    int ret = UAP_STATUS_SUCCESS;
++    HostCmd_DS_COMMAND *cmd;
++    uap_adapter *Adapter = priv->adapter;
++    ENTER();
++    PRINTM(CMND, "Sleep confirm resp\n");
++    if (!resp_len) {
++        PRINTM(ERROR, "Cmd Size is 0\n");
++        ret = -EFAULT;
++        goto done;
++    }
++    cmd = (HostCmd_DS_COMMAND *) resp;
++    cmd->Result = uap_le16_to_cpu(cmd->Result);
++    if (cmd->Result != UAP_STATUS_SUCCESS) {
++        PRINTM(ERROR, "HOST_CMD_APCMD_PS_SLEEP_CONFIRM fail=%x\n", cmd->Result);
++        ret = -EFAULT;
++    }
++  done:
++    if (ret == UAP_STATUS_SUCCESS)
++        Adapter->ps_state = PS_STATE_SLEEP;
++    else
++        Adapter->ps_state = PS_STATE_AWAKE;
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function checks condition and prepares to
++ *  send sleep confirm command to firmware if OK.
++ *
++ *  @param priv       A pointer to uap_private structure
++ *  @return           n/a
++ */
++static void
++uap_ps_cond_check(uap_private * priv)
++{
++    uap_adapter *Adapter = priv->adapter;
++
++    ENTER();
++    if (!priv->uap_dev.cmd_sent &&
++        !Adapter->cmd_pending && !Adapter->IntCounter) {
++        uap_dnld_sleep_confirm_cmd(priv);
++    } else {
++        PRINTM(INFO, "Delay Sleep Confirm (%s%s%s)\n",
++               (priv->uap_dev.cmd_sent) ? "D" : "",
++               (Adapter->cmd_pending) ? "C" : "",
++               (Adapter->IntCounter) ? "I" : "");
++    }
++    LEAVE();
++}
++
++/**
++ *  @brief This function add cmd to cmdQ and waiting for response
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @param skb           A pointer to the skb for process
++ *  @param wait_option Wait option
++ *  @return      UAP_STATUS_SUCCESS for success otherwise UAP_STATUS_FAILURE
++ */
++static int
++uap_process_cmd(uap_private * priv, struct sk_buff *skb, u8 wait_option)
++{
++    uap_adapter *Adapter = priv->adapter;
++    int ret = UAP_STATUS_SUCCESS;
++    HostCmd_DS_COMMAND *cmd;
++    u8 *headptr;
++    ENTER();
++    if (Adapter->HardwareStatus != HWReady) {
++        PRINTM(ERROR, "Hw not ready, uap_process_cmd\n");
++        kfree(skb);
++        LEAVE();
++        return -EFAULT;
++    }
++    skb->cb[0] = wait_option;
++    headptr = skb->data;
++    *(u16 *) & headptr[0] = uap_cpu_to_le16(skb->len);
++    *(u16 *) & headptr[2] = uap_cpu_to_le16(MV_TYPE_CMD);
++    cmd = (HostCmd_DS_COMMAND *) (skb->data + INTF_HEADER_LEN);
++    Adapter->SeqNum++;
++    cmd->SeqNum = uap_cpu_to_le16(Adapter->SeqNum);
++    PRINTM(CMND, "process_cmd: %x\n", cmd->Command);
++    DBG_HEXDUMP(CMD_D, "process_cmd", (u8 *) cmd, cmd->Size);
++    if (!wait_option) {
++        skb_queue_tail(&priv->adapter->cmd_queue, skb);
++        wake_up_interruptible(&priv->MainThread.waitQ);
++        LEAVE();
++        return ret;
++    }
++    if (OS_ACQ_SEMAPHORE_BLOCK(&Adapter->CmdSem)) {
++        PRINTM(ERROR, "Acquire semaphore error, uap_prepare_cmd\n");
++        kfree(skb);
++        LEAVE();
++        return -EBUSY;
++    }
++    skb_queue_tail(&priv->adapter->cmd_queue, skb);
++    Adapter->CmdWaitQWoken = FALSE;
++    wake_up_interruptible(&priv->MainThread.waitQ);
++    /* Sleep until response is generated by FW */
++    if (wait_option == HostCmd_OPTION_WAITFORRSP_TIMEOUT) {
++        if (!os_wait_interruptible_timeout
++            (Adapter->cmdwait_q, Adapter->CmdWaitQWoken, MRVDRV_TIMER_20S)) {
++            PRINTM(ERROR, "Cmd timeout\n");
++            Adapter->cmd_pending = FALSE;
++            ret = -EFAULT;
++        }
++    } else
++        wait_event_interruptible(Adapter->cmdwait_q, Adapter->CmdWaitQWoken);
++    OS_REL_SEMAPHORE(&Adapter->CmdSem);
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief Inspect the response buffer for pointers to expected TLVs
++ *
++ *
++ *  @param pTlv        Pointer to the start of the TLV buffer to parse
++ *  @param tlvBufSize  Size of the TLV buffer
++ *  @param reqTlvType  request tlv's tlvtype
++ *  @param ppTlv       Output parameter: Pointer to the request TLV if found
++ *
++ *  @return            void
++ */
++static void
++uap_get_tlv_ptrs(MrvlIEtypes_Data_t * pTlv, int tlvBufSize,
++                 u16 reqTlvType, MrvlIEtypes_Data_t ** ppTlv)
++{
++    MrvlIEtypes_Data_t *pCurrentTlv;
++    int tlvBufLeft;
++    u16 tlvType;
++    u16 tlvLen;
++
++    ENTER();
++    pCurrentTlv = pTlv;
++    tlvBufLeft = tlvBufSize;
++    *ppTlv = NULL;
++    PRINTM(INFO, "uap_get_tlv: tlvBufSize = %d, reqTlvType=%x\n", tlvBufSize,
++           reqTlvType);
++    while (tlvBufLeft >= sizeof(MrvlIEtypesHeader_t)) {
++        tlvType = uap_le16_to_cpu(pCurrentTlv->Header.Type);
++        tlvLen = uap_le16_to_cpu(pCurrentTlv->Header.Len);
++        if (reqTlvType == tlvType)
++            *ppTlv = (MrvlIEtypes_Data_t *) pCurrentTlv;
++        if (*ppTlv) {
++            HEXDUMP("TLV Buf", (u8 *) * ppTlv, tlvLen);
++            break;
++        }
++        tlvBufLeft -= (sizeof(pTlv->Header) + tlvLen);
++        pCurrentTlv = (MrvlIEtypes_Data_t *) (pCurrentTlv->Data + tlvLen);
++    }                           /* while */
++    LEAVE();
++}
++
++/**
++ *  @brief This function get mac
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @return      UAP_STATUS_SUCCESS on success, otherwise failure code
++ */
++static int
++uap_get_mac_address(uap_private * priv)
++{
++    int ret = UAP_STATUS_SUCCESS;
++    u32 CmdSize;
++    HostCmd_DS_COMMAND *cmd;
++    uap_adapter *Adapter = priv->adapter;
++    struct sk_buff *skb;
++    MrvlIEtypes_MacAddr_t *pMacAddrTlv;
++    MrvlIEtypes_Data_t *pTlv;
++    u16 tlvBufSize;
++    ENTER();
++    skb = dev_alloc_skb(MRVDRV_SIZE_OF_CMD_BUFFER);
++    if (!skb) {
++        PRINTM(ERROR, "No free skb\n");
++        ret = -ENOMEM;
++        goto done;
++    }
++    CmdSize =
++        S_DS_GEN + sizeof(HostCmd_SYS_CONFIG) + sizeof(MrvlIEtypes_MacAddr_t);
++    cmd = (HostCmd_DS_COMMAND *) (skb->data + INTF_HEADER_LEN);
++    cmd->Command = uap_cpu_to_le16(HOST_CMD_APCMD_SYS_CONFIGURE);
++    cmd->Size = uap_cpu_to_le16(CmdSize);
++    cmd->params.sys_config.Action = uap_cpu_to_le16(ACTION_GET);
++    pMacAddrTlv =
++        (MrvlIEtypes_MacAddr_t *) (skb->data + INTF_HEADER_LEN + S_DS_GEN +
++                                   sizeof(HostCmd_SYS_CONFIG));
++    pMacAddrTlv->Header.Type = uap_cpu_to_le16(MRVL_AP_MAC_ADDRESS_TLV_ID);
++    pMacAddrTlv->Header.Len = uap_cpu_to_le16(ETH_ALEN);
++    skb_put(skb, CmdSize + INTF_HEADER_LEN);
++    if (UAP_STATUS_SUCCESS !=
++        uap_process_cmd(priv, skb, HostCmd_OPTION_WAITFORRSP_TIMEOUT)) {
++        PRINTM(ERROR, "Fail to process cmd SYS_CONFIGURE Query\n");
++        ret = -EFAULT;
++        goto done;
++    }
++    if (!Adapter->CmdSize) {
++        PRINTM(ERROR, "Cmd Size is 0\n");
++        ret = -EFAULT;
++        goto done;
++    }
++    cmd = (HostCmd_DS_COMMAND *) Adapter->CmdBuf;
++    cmd->Result = uap_le16_to_cpu(cmd->Result);
++    if (cmd->Result != UAP_STATUS_SUCCESS) {
++        PRINTM(ERROR, "uap_get_mac_address fail=%x\n", cmd->Result);
++        ret = -EFAULT;
++        goto done;
++    }
++    pTlv =
++        (MrvlIEtypes_Data_t *) (Adapter->CmdBuf + S_DS_GEN +
++                                sizeof(HostCmd_SYS_CONFIG));
++    tlvBufSize = Adapter->CmdSize - S_DS_GEN - sizeof(HostCmd_SYS_CONFIG);
++    uap_get_tlv_ptrs(pTlv, tlvBufSize, MRVL_AP_MAC_ADDRESS_TLV_ID,
++                     (MrvlIEtypes_Data_t **) & pMacAddrTlv);
++    if (pMacAddrTlv) {
++        memcpy(priv->uap_dev.netdev->dev_addr, pMacAddrTlv->ApMacAddr,
++               ETH_ALEN);
++        HEXDUMP("Original MAC addr", priv->uap_dev.netdev->dev_addr, ETH_ALEN);
++    }
++  done:
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function checks the conditions and sends packet to device
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @param skb           A pointer to the skb for process
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++static int
++uap_process_tx(uap_private * priv, struct sk_buff *skb)
++{
++    uap_adapter *Adapter = priv->adapter;
++    int ret = UAP_STATUS_SUCCESS;
++    TxPD *pLocalTxPD;
++    u8 *headptr;
++    struct sk_buff *newskb;
++    int newheadlen;
++    ENTER();
++    ASSERT(skb);
++    if (!skb) {
++        LEAVE();
++        return UAP_STATUS_FAILURE;
++    }
++    if (skb_headroom(skb) < (sizeof(TxPD) + INTF_HEADER_LEN + HEADER_ALIGNMENT)) {
++        newheadlen = sizeof(TxPD) + INTF_HEADER_LEN + HEADER_ALIGNMENT;
++        PRINTM(WARN, "Tx: Insufficient skb headroom %d\n", skb_headroom(skb));
++        /* Insufficient skb headroom - allocate a new skb */
++        newskb = skb_realloc_headroom(skb, newheadlen);
++        if (unlikely(newskb == NULL)) {
++            PRINTM(ERROR, "Tx: Cannot allocate skb\n");
++            ret = UAP_STATUS_FAILURE;
++            goto done;
++        }
++        kfree_skb(skb);
++        skb = newskb;
++        PRINTM(INFO, "new skb headroom %d\n", skb_headroom(skb));
++    }
++    /* headptr should be aligned */
++    headptr = skb->data - sizeof(TxPD) - INTF_HEADER_LEN;
++    headptr = (u8 *) ((u32) headptr & ~((u32) (HEADER_ALIGNMENT - 1)));
++
++    pLocalTxPD = (TxPD *) (headptr + INTF_HEADER_LEN);
++    memset(pLocalTxPD, 0, sizeof(TxPD));
++    pLocalTxPD->BssType = PKT_TYPE_MICROAP;
++    pLocalTxPD->TxPktLength = skb->len;
++    /* offset of actual data */
++    pLocalTxPD->TxPktOffset = (long) skb->data - (long) pLocalTxPD;
++    endian_convert_TxPD(pLocalTxPD);
++    *(u16 *) & headptr[0] =
++        uap_cpu_to_le16(skb->len + ((long) skb->data - (long) headptr));
++    *(u16 *) & headptr[2] = uap_cpu_to_le16(MV_TYPE_DAT);
++    ret =
++        sbi_host_to_card(priv, headptr,
++                         skb->len + ((long) skb->data - (long) headptr));
++    if (ret) {
++        PRINTM(ERROR, "uap_process_tx Error: sbi_host_to_card failed: 0x%X\n",
++               ret);
++        Adapter->dbg.num_tx_host_to_card_failure++;
++        goto done;
++    }
++    PRINTM(DATA, "Data => FW\n");
++    DBG_HEXDUMP(DAT_D, "Tx", headptr,
++                MIN(skb->len + sizeof(TxPD), DATA_DUMP_LEN));
++  done:
++    /* Freed skb */
++    kfree_skb(skb);
++    LEAVE();
++    return ret;
++}
++
++static struct netlink_kernel_cfg cfg = {
++      .groups = NL_MULTICAST_GROUP,
++};
++
++/**
++ *  @brief This function initializes the adapter structure
++ *  and set default value to the member of adapter.
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++static int
++uap_init_sw(uap_private * priv)
++{
++    uap_adapter *Adapter = priv->adapter;
++
++    ENTER();
++
++    if (!(Adapter->CmdBuf = kmalloc(MRVDRV_SIZE_OF_CMD_BUFFER, GFP_KERNEL))) {
++        PRINTM(INFO, "Failed to allocate command buffer!\n");
++        LEAVE();
++        return UAP_STATUS_FAILURE;
++    }
++
++    Adapter->cmd_pending = FALSE;
++    Adapter->CmdWaitQWoken = FALSE;
++    Adapter->ps_state = PS_STATE_AWAKE;
++    Adapter->WakeupTries = 0;
++
++    memset(&Adapter->PSConfirmSleep, 0, sizeof(PS_CMD_ConfirmSleep));
++        /** SDIO header */
++    Adapter->PSConfirmSleep.SDLen =
++        uap_cpu_to_le16(sizeof(PS_CMD_ConfirmSleep));
++    Adapter->PSConfirmSleep.SDType = uap_cpu_to_le16(MV_TYPE_CMD);
++    Adapter->PSConfirmSleep.SeqNum = 0;
++    Adapter->PSConfirmSleep.Command = uap_cpu_to_le16(HOST_CMD_SLEEP_CONFIRM);
++    Adapter->PSConfirmSleep.Size = uap_cpu_to_le16(sizeof(HostCmd_DS_GEN));
++    Adapter->PSConfirmSleep.Result = 0;
++
++    init_waitqueue_head(&Adapter->cmdwait_q);
++    OS_INIT_SEMAPHORE(&Adapter->CmdSem);
++
++    skb_queue_head_init(&Adapter->tx_queue);
++    skb_queue_head_init(&Adapter->cmd_queue);
++
++    /* Status variable */
++    Adapter->HardwareStatus = HWInitializing;
++
++    /* PnP support */
++    Adapter->SurpriseRemoved = FALSE;
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22)
++    Adapter->nl_sk = netlink_kernel_create(NETLINK_MARVELL,
++                                           NL_MULTICAST_GROUP, NULL,
++                                           THIS_MODULE);
++#else
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
++    Adapter->nl_sk = netlink_kernel_create(NETLINK_MARVELL,
++                                           NL_MULTICAST_GROUP, NULL, NULL,
++                                           THIS_MODULE);
++#else
++    Adapter->nl_sk = netlink_kernel_create(&init_net, NETLINK_MARVELL, &cfg);
++#endif
++#endif
++    if (!Adapter->nl_sk) {
++        PRINTM(ERROR,
++               "Could not initialize netlink event passing mechanism!\n");
++    }
++    LEAVE();
++    return UAP_STATUS_SUCCESS;
++}
++
++/**
++ *  @brief This function sends FUNC_INIT command to firmware
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @return      UAP_STATUS_SUCCESS on success, otherwise failure code
++ */
++static int
++uap_func_init(uap_private * priv)
++{
++    int ret = UAP_STATUS_SUCCESS;
++    u32 CmdSize;
++    HostCmd_DS_GEN *cmd;
++    uap_adapter *Adapter = priv->adapter;
++    struct sk_buff *skb;
++    ENTER();
++    if (Adapter->HardwareStatus != HWReady) {
++        PRINTM(ERROR, "uap_func_init:Hardware is not ready!\n");
++        ret = -EFAULT;
++        goto done;
++    }
++    skb = dev_alloc_skb(MRVDRV_SIZE_OF_CMD_BUFFER);
++    if (!skb) {
++        PRINTM(ERROR, "No free skb\n");
++        ret = -ENOMEM;
++        goto done;
++    }
++    CmdSize = sizeof(HostCmd_DS_GEN);
++    cmd = (HostCmd_DS_GEN *) (skb->data + INTF_HEADER_LEN);
++    cmd->Command = uap_cpu_to_le16(HostCmd_CMD_FUNC_INIT);
++    cmd->Size = uap_cpu_to_le16(CmdSize);
++    skb_put(skb, CmdSize + INTF_HEADER_LEN);
++    PRINTM(CMND, "HostCmd_CMD_FUNC_INIT\n");
++    if (UAP_STATUS_SUCCESS !=
++        uap_process_cmd(priv, skb, HostCmd_OPTION_WAITFORRSP_TIMEOUT)) {
++        PRINTM(ERROR, "Fail to process cmd HostCmd_CMD_FUNC_INIT\n");
++        ret = -EFAULT;
++        goto done;
++    }
++  done:
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function sends FUNC_SHUTDOWN command to firmware
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @return      UAP_STATUS_SUCCESS on success, otherwise failure code
++ */
++static int __exit
++uap_func_shutdown(uap_private * priv)
++{
++    int ret = UAP_STATUS_SUCCESS;
++    u32 CmdSize;
++    HostCmd_DS_GEN *cmd;
++    uap_adapter *Adapter = priv->adapter;
++    struct sk_buff *skb;
++    ENTER();
++    if (Adapter->HardwareStatus != HWReady) {
++        PRINTM(ERROR, "uap_func_shutdown:Hardware is not ready!\n");
++        ret = -EFAULT;
++        goto done;
++    }
++    skb = dev_alloc_skb(MRVDRV_SIZE_OF_CMD_BUFFER);
++    if (!skb) {
++        PRINTM(ERROR, "No free skb\n");
++        ret = -ENOMEM;
++        goto done;
++    }
++    CmdSize = sizeof(HostCmd_DS_GEN);
++    cmd = (HostCmd_DS_GEN *) (skb->data + INTF_HEADER_LEN);
++    cmd->Command = uap_cpu_to_le16(HostCmd_CMD_FUNC_SHUTDOWN);
++    cmd->Size = uap_cpu_to_le16(CmdSize);
++    skb_put(skb, CmdSize + INTF_HEADER_LEN);
++    PRINTM(CMND, "HostCmd_CMD_FUNC_SHUTDOWN\n");
++    if (UAP_STATUS_SUCCESS !=
++        uap_process_cmd(priv, skb, HostCmd_OPTION_WAITFORRSP_TIMEOUT)) {
++        PRINTM(ERROR, "Fail to process cmd HostCmd_CMD_FUNC_SHUTDOWN\n");
++        ret = -EFAULT;
++        goto done;
++    }
++  done:
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function initializes firmware
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++static int
++uap_init_fw(uap_private * priv)
++{
++    int ret = UAP_STATUS_SUCCESS;
++    ENTER();
++    sbi_disable_host_int(priv);
++    /* Check if firmware is already running */
++    if (sbi_check_fw_status(priv, 1) == UAP_STATUS_SUCCESS) {
++        PRINTM(MSG, "UAP FW already running! Skip FW download\n");
++    } else {
++        if ((ret = request_firmware(&priv->fw_helper, helper_name,
++                                    priv->hotplug_device)) < 0) {
++            PRINTM(FATAL,
++                   "request_firmware() failed (helper), error code = %#x\n",
++                   ret);
++            goto done;
++        }
++
++        /* Download the helper */
++        ret = sbi_prog_helper(priv);
++
++        if (ret) {
++            PRINTM(FATAL,
++                   "Bootloader in invalid state! Helper download failed!\n");
++            ret = UAP_STATUS_FAILURE;
++            goto done;
++        }
++        if ((ret = request_firmware(&priv->firmware, fw_name,
++                                    priv->hotplug_device)) < 0) {
++            PRINTM(FATAL, "request_firmware() failed, error code = %#x\n", ret);
++            goto done;
++        }
++
++        /* Download the main firmware via the helper firmware */
++        if (sbi_prog_fw_w_helper(priv)) {
++            PRINTM(FATAL, "UAP FW download failed!\n");
++            ret = UAP_STATUS_FAILURE;
++            goto done;
++        }
++        /* Check if the firmware is downloaded successfully or not */
++        if (sbi_check_fw_status(priv, MAX_FIRMWARE_POLL_TRIES) ==
++            UAP_STATUS_FAILURE) {
++            PRINTM(FATAL, "FW failed to be active in time!\n");
++            ret = UAP_STATUS_FAILURE;
++            goto done;
++        }
++        PRINTM(MSG, "UAP FW is active\n");
++    }
++    sbi_enable_host_int(priv);
++    priv->adapter->HardwareStatus = HWReady;
++    if (uap_func_init(priv) != UAP_STATUS_SUCCESS) {
++        ret = UAP_STATUS_FAILURE;
++        goto done;
++    }
++  done:
++    if (priv->fw_helper)
++        release_firmware(priv->fw_helper);
++    if (priv->firmware)
++        release_firmware(priv->firmware);
++    LEAVE();
++    return ret;
++
++}
++
++/**
++ *  @brief This function frees the structure of adapter
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @return      n/a
++ */
++static void
++uap_free_adapter(uap_private * priv)
++{
++    uap_adapter *Adapter = priv->adapter;
++
++    ENTER();
++
++    if (Adapter) {
++        if ((Adapter->nl_sk) && ((Adapter->nl_sk)->sk_socket)) {
++            sock_release((Adapter->nl_sk)->sk_socket);
++            Adapter->nl_sk = NULL;
++        }
++        if (Adapter->CmdBuf)
++            kfree(Adapter->CmdBuf);
++        skb_queue_purge(&priv->adapter->tx_queue);
++        skb_queue_purge(&priv->adapter->cmd_queue);
++        /* Free the adapter object itself */
++        kfree(Adapter);
++        priv->adapter = NULL;
++    }
++
++    LEAVE();
++}
++
++/**
++ *  @brief This function handles the major job in uap driver.
++ *  it handles the event generated by firmware, rx data received
++ *  from firmware and tx data sent from kernel.
++ *
++ *  @param data    A pointer to uap_thread structure
++ *  @return        BT_STATUS_SUCCESS
++ */
++static int
++uap_service_main_thread(void *data)
++{
++    uap_thread *thread = data;
++    uap_private *priv = thread->priv;
++    uap_adapter *Adapter = priv->adapter;
++    wait_queue_t wait;
++    u8 ireg = 0;
++    struct sk_buff *skb;
++    ENTER();
++    uap_activate_thread(thread);
++    init_waitqueue_entry(&wait, current);
++    current->flags |= PF_NOFREEZE;
++
++    for (;;) {
++        add_wait_queue(&thread->waitQ, &wait);
++        OS_SET_THREAD_STATE(TASK_INTERRUPTIBLE);
++        if ((Adapter->WakeupTries) ||
++            (!Adapter->IntCounter && Adapter->ps_state == PS_STATE_PRE_SLEEP) ||
++            (!priv->adapter->IntCounter
++             && (priv->uap_dev.data_sent ||
++                 skb_queue_empty(&priv->adapter->tx_queue))
++             && (priv->uap_dev.cmd_sent || Adapter->cmd_pending ||
++                 skb_queue_empty(&priv->adapter->cmd_queue))
++            )) {
++            PRINTM(INFO, "Main: Thread sleeping...\n");
++            schedule();
++        }
++        OS_SET_THREAD_STATE(TASK_RUNNING);
++        remove_wait_queue(&thread->waitQ, &wait);
++        if (kthread_should_stop() || Adapter->SurpriseRemoved) {
++            PRINTM(INFO, "main-thread: break from main thread: "
++                   "SurpriseRemoved=0x%x\n", Adapter->SurpriseRemoved);
++            /* Cancel pending command */
++            if (Adapter->cmd_pending == TRUE) {
++                /* Wake up cmd Q */
++                Adapter->CmdWaitQWoken = TRUE;
++                wake_up_interruptible(&Adapter->cmdwait_q);
++            }
++            break;
++        }
++
++        PRINTM(INFO, "Main: Thread waking up...\n");
++        if (priv->adapter->IntCounter) {
++            OS_INT_DISABLE;
++            Adapter->IntCounter = 0;
++            OS_INT_RESTORE;
++            sbi_get_int_status(priv, &ireg);
++        } else if ((priv->adapter->ps_state == PS_STATE_SLEEP) &&
++                   (!skb_queue_empty(&priv->adapter->cmd_queue) ||
++                    !skb_queue_empty(&priv->adapter->tx_queue))) {
++            priv->adapter->WakeupTries++;
++            PRINTM(CMND, "%lu : Wakeup device...\n", os_time_get());
++            sbi_wakeup_firmware(priv);
++            continue;
++        }
++        if (Adapter->ps_state == PS_STATE_PRE_SLEEP)
++            uap_ps_cond_check(priv);
++
++        /* The PS state is changed during processing of Sleep Request event
++           above */
++        if ((Adapter->ps_state == PS_STATE_SLEEP) ||
++            (Adapter->ps_state == PS_STATE_PRE_SLEEP))
++            continue;
++        /* Execute the next command */
++        if (!priv->uap_dev.cmd_sent && !Adapter->cmd_pending &&
++            (Adapter->HardwareStatus == HWReady)) {
++            if (!skb_queue_empty(&priv->adapter->cmd_queue)) {
++                skb = skb_dequeue(&priv->adapter->cmd_queue);
++                if (skb) {
++                    Adapter->CmdSize = 0;
++                    Adapter->cmd_pending = TRUE;
++                    Adapter->cmd_wait_option = skb->cb[0];
++                    if (sbi_host_to_card(priv, skb->data, skb->len)) {
++                        PRINTM(ERROR, "Cmd:sbi_host_to_card failed!\n");
++                        Adapter->cmd_pending = FALSE;
++                        Adapter->dbg.num_cmd_host_to_card_failure++;
++                        /* Wake up cmd Q */
++                        Adapter->CmdWaitQWoken = TRUE;
++                        wake_up_interruptible(&Adapter->cmdwait_q);
++                    } else {
++                        if (Adapter->cmd_wait_option ==
++                            HostCmd_OPTION_WAITFORSEND) {
++                            /* Wake up cmd Q */
++                            Adapter->CmdWaitQWoken = TRUE;
++                            wake_up_interruptible(&Adapter->cmdwait_q);
++                            Adapter->cmd_wait_option = FALSE;
++                        }
++                    }
++                    kfree_skb(skb);
++                }
++            }
++        }
++        if (!priv->uap_dev.data_sent && (Adapter->HardwareStatus == HWReady)) {
++            if (!skb_queue_empty(&priv->adapter->tx_queue)) {
++                skb = skb_dequeue(&priv->adapter->tx_queue);
++                if (skb) {
++                    if (uap_process_tx(priv, skb)) {
++                        priv->stats.tx_dropped++;
++                        priv->stats.tx_errors++;
++                        os_start_queue(priv);
++                    } else {
++                        priv->stats.tx_packets++;
++                        priv->stats.tx_bytes += skb->len;
++                    }
++
++                }
++            }
++        }
++    }
++    uap_deactivate_thread(thread);
++    LEAVE();
++    return UAP_STATUS_SUCCESS;
++}
++
++/**
++ *  @brief uap hostcmd ioctl handler
++ *
++ *  @param dev      A pointer to net_device structure
++ *  @param req      A pointer to ifreq structure
++ *  @return         UAP_STATUS_SUCCESS --success, otherwise fail
++ */
++/*********  format of ifr_data *************/
++/*    buf_len + Hostcmd_body             */
++/*    buf_len: 4 bytes                     */
++/*             the length of the buf which */
++/*             can be used to return data  */
++/*             to application            */
++/*    Hostcmd_body                       */
++/*******************************************/
++static int
++uap_hostcmd_ioctl(struct net_device *dev, struct ifreq *req)
++{
++    u32 buf_len;
++    HostCmd_HEADER head;
++    uap_private *priv = (uap_private *) netdev_priv(dev);
++    uap_adapter *Adapter = priv->adapter;
++    int ret = UAP_STATUS_SUCCESS;
++    struct sk_buff *skb;
++
++    ENTER();
++
++    /* Sanity check */
++    if (req->ifr_data == NULL) {
++        PRINTM(ERROR, "uap_hostcmd_ioctl() corrupt data\n");
++        LEAVE();
++        return -EFAULT;
++    }
++    if (copy_from_user(&buf_len, req->ifr_data, sizeof(buf_len))) {
++        PRINTM(ERROR, "Copy from user failed\n");
++        LEAVE();
++        return -EFAULT;
++    }
++    memset(&head, 0, sizeof(HostCmd_HEADER));
++    /* Get the command size from user space */
++    if (copy_from_user
++        (&head, req->ifr_data + sizeof(buf_len), sizeof(HostCmd_HEADER))) {
++        PRINTM(ERROR, "Copy from user failed\n");
++        LEAVE();
++        return -EFAULT;
++    }
++    head.Size = uap_le16_to_cpu(head.Size);
++    if (head.Size > MRVDRV_SIZE_OF_CMD_BUFFER) {
++        PRINTM(ERROR, "CmdSize too big=%d\n", head.Size);
++        LEAVE();
++        return -EFAULT;
++    }
++    PRINTM(CMND, "ioctl: hostcmd=%x, size=%d,buf_len=%d\n", head.Command,
++           head.Size, buf_len);
++    skb = dev_alloc_skb(head.Size + INTF_HEADER_LEN);
++    if (!skb) {
++        PRINTM(ERROR, "No free skb\n");
++        LEAVE();
++        return -ENOMEM;
++    }
++
++    /* Get the command from user space */
++    if (copy_from_user
++        (skb->data + INTF_HEADER_LEN, req->ifr_data + sizeof(buf_len),
++         head.Size)) {
++        PRINTM(ERROR, "Copy from user failed\n");
++        LEAVE();
++        return -EFAULT;
++    }
++    skb_put(skb, head.Size + INTF_HEADER_LEN);
++    if (UAP_STATUS_SUCCESS !=
++        uap_process_cmd(priv, skb, HostCmd_OPTION_WAITFORRSP)) {
++        PRINTM(ERROR, "Fail to process cmd\n");
++        LEAVE();
++        return -EFAULT;
++    }
++    if (!Adapter->CmdSize) {
++        PRINTM(ERROR, "Cmd Size is 0\n");
++        LEAVE();
++        return -EFAULT;
++    }
++    if (Adapter->CmdSize > buf_len) {
++        PRINTM(ERROR, "buf_len is too small\n");
++        LEAVE();
++        return -EFAULT;
++    }
++    /* Copy to user */
++    if (copy_to_user
++        (req->ifr_data + sizeof(buf_len), Adapter->CmdBuf, Adapter->CmdSize)) {
++        PRINTM(ERROR, "Copy to user failed!\n");
++        LEAVE();
++        return -EFAULT;
++    }
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief uap power mode ioctl handler
++ *
++ *  @param dev      A pointer to net_device structure
++ *  @param req      A pointer to ifreq structure
++ *  @return         UAP_STATUS_SUCCESS --success, otherwise fail
++ */
++static int
++uap_power_mode_ioctl(struct net_device *dev, struct ifreq *req)
++{
++    ps_mgmt pm_cfg;
++    int ret = UAP_STATUS_SUCCESS;
++    uap_private *priv = (uap_private *) netdev_priv(dev);
++    uap_adapter *Adapter = priv->adapter;
++    struct sk_buff *skb = NULL;
++    HostCmd_DS_COMMAND *cmd;
++    u32 CmdSize;
++    u8 *tlv = NULL;
++    MrvlIEtypes_sleep_param_t *sleep_tlv = NULL;
++    MrvlIEtypes_inact_sleep_param_t *inact_tlv = NULL;
++    u16 tlv_buf_left = 0;
++    MrvlIEtypesHeader_t *tlvbuf = NULL;
++    u16 tlv_type = 0;
++    u16 tlv_len = 0;
++
++    ENTER();
++
++    /* Sanity check */
++    if (req->ifr_data == NULL) {
++        PRINTM(ERROR, "uap_power_mode_ioctl() corrupt data\n");
++        LEAVE();
++        return -EFAULT;
++    }
++
++    memset(&pm_cfg, 0, sizeof(ps_mgmt));
++    if (copy_from_user(&pm_cfg, req->ifr_data, sizeof(ps_mgmt))) {
++        PRINTM(ERROR, "Copy from user failed\n");
++        LEAVE();
++        return -EFAULT;
++    }
++    PRINTM(CMND,
++           "ioctl power: flag=0x%x ps_mode=%d ctrl_bitmap=%d min_sleep=%d max_sleep=%d "
++           "inact_to=%d min_awake=%d max_awake=%d\n", pm_cfg.flags,
++           (int) pm_cfg.ps_mode, (int) pm_cfg.sleep_param.ctrl_bitmap,
++           (int) pm_cfg.sleep_param.min_sleep,
++           (int) pm_cfg.sleep_param.max_sleep,
++           (int) pm_cfg.inact_param.inactivity_to,
++           (int) pm_cfg.inact_param.min_awake,
++           (int) pm_cfg.inact_param.max_awake);
++
++    if (pm_cfg.
++        flags & ~(PS_FLAG_PS_MODE | PS_FLAG_SLEEP_PARAM |
++                  PS_FLAG_INACT_SLEEP_PARAM)) {
++        PRINTM(ERROR, "Invalid parameter: flags = 0x%x\n", pm_cfg.flags);
++        ret = -EINVAL;
++        goto done;
++    }
++    if (pm_cfg.ps_mode > PS_MODE_INACTIVITY) {
++        PRINTM(ERROR, "Invalid parameter: ps_mode = %d\n", (int) pm_cfg.flags);
++        ret = -EINVAL;
++        goto done;
++    }
++
++    skb = dev_alloc_skb(MRVDRV_SIZE_OF_CMD_BUFFER);
++    if (!skb) {
++        PRINTM(INFO, "No free skb\n");
++        ret = -ENOMEM;
++        goto done;
++    }
++
++    CmdSize = S_DS_GEN + sizeof(HostCmd_DS_POWER_MGMT_EXT);
++
++    cmd = (HostCmd_DS_COMMAND *) (skb->data + INTF_HEADER_LEN);
++    cmd->Command = uap_cpu_to_le16(HOST_CMD_POWER_MGMT_EXT);
++    if (!pm_cfg.flags) {
++        cmd->params.pm_cfg.action = uap_cpu_to_le16(ACTION_GET);
++    } else {
++        cmd->params.pm_cfg.action = uap_cpu_to_le16(ACTION_SET);
++        cmd->params.pm_cfg.power_mode = uap_cpu_to_le16(pm_cfg.ps_mode);
++        tlv = (u8 *) & cmd->params.pm_cfg + sizeof(HostCmd_DS_POWER_MGMT_EXT);
++
++        if ((pm_cfg.ps_mode) && (pm_cfg.flags & PS_FLAG_SLEEP_PARAM)) {
++            sleep_tlv = (MrvlIEtypes_sleep_param_t *) tlv;
++            sleep_tlv->header.Type = uap_cpu_to_le16(TLV_TYPE_AP_SLEEP_PARAM);
++            sleep_tlv->header.Len =
++                uap_cpu_to_le16(sizeof(MrvlIEtypes_sleep_param_t) -
++                                sizeof(MrvlIEtypesHeader_t));
++            sleep_tlv->ctrl_bitmap =
++                uap_cpu_to_le32(pm_cfg.sleep_param.ctrl_bitmap);
++            sleep_tlv->min_sleep =
++                uap_cpu_to_le32(pm_cfg.sleep_param.min_sleep);
++            sleep_tlv->max_sleep =
++                uap_cpu_to_le32(pm_cfg.sleep_param.max_sleep);
++            CmdSize += sizeof(MrvlIEtypes_sleep_param_t);
++            tlv += sizeof(MrvlIEtypes_sleep_param_t);
++        }
++        if ((pm_cfg.ps_mode == PS_MODE_INACTIVITY) &&
++            (pm_cfg.flags & PS_FLAG_INACT_SLEEP_PARAM)) {
++            inact_tlv = (MrvlIEtypes_inact_sleep_param_t *) tlv;
++            inact_tlv->header.Type =
++                uap_cpu_to_le16(TLV_TYPE_AP_INACT_SLEEP_PARAM);
++            inact_tlv->header.Len =
++                uap_cpu_to_le16(sizeof(MrvlIEtypes_inact_sleep_param_t) -
++                                sizeof(MrvlIEtypesHeader_t));
++            inact_tlv->inactivity_to =
++                uap_cpu_to_le32(pm_cfg.inact_param.inactivity_to);
++            inact_tlv->min_awake =
++                uap_cpu_to_le32(pm_cfg.inact_param.min_awake);
++            inact_tlv->max_awake =
++                uap_cpu_to_le32(pm_cfg.inact_param.max_awake);
++            CmdSize += sizeof(MrvlIEtypes_inact_sleep_param_t);
++            tlv += sizeof(MrvlIEtypes_inact_sleep_param_t);
++        }
++    }
++    cmd->Size = uap_cpu_to_le16(CmdSize);
++    skb_put(skb, CmdSize + INTF_HEADER_LEN);
++    if (UAP_STATUS_SUCCESS !=
++        uap_process_cmd(priv, skb, HostCmd_OPTION_WAITFORRSP)) {
++        PRINTM(ERROR, "Fail to process cmd POWER_MODE\n");
++        ret = -EFAULT;
++        goto done;
++    }
++    if (!Adapter->CmdSize) {
++        PRINTM(ERROR, "Cmd Size is 0\n");
++        ret = -EFAULT;
++        goto done;
++    }
++    cmd = (HostCmd_DS_COMMAND *) Adapter->CmdBuf;
++    cmd->Result = uap_le16_to_cpu(cmd->Result);
++    if (cmd->Result != UAP_STATUS_SUCCESS) {
++        PRINTM(ERROR, "HOST_CMD_APCMD_POWER_MODE fail=%x\n", cmd->Result);
++        ret = -EFAULT;
++        goto done;
++    }
++    if (pm_cfg.flags) {
++        Adapter->psmode = uap_le16_to_cpu(cmd->params.pm_cfg.power_mode);
++    } else {
++        pm_cfg.flags = PS_FLAG_PS_MODE;
++        pm_cfg.ps_mode = uap_le16_to_cpu(cmd->params.pm_cfg.power_mode);
++        tlv_buf_left =
++            cmd->Size - (sizeof(HostCmd_DS_POWER_MGMT_EXT) + S_DS_GEN);
++        tlvbuf =
++            (MrvlIEtypesHeader_t *) ((u8 *) & cmd->params.pm_cfg +
++                                     sizeof(HostCmd_DS_POWER_MGMT_EXT));
++        while (tlv_buf_left >= sizeof(MrvlIEtypesHeader_t)) {
++            tlv_type = uap_le16_to_cpu(tlvbuf->Type);
++            tlv_len = uap_le16_to_cpu(tlvbuf->Len);
++            switch (tlv_type) {
++            case TLV_TYPE_AP_SLEEP_PARAM:
++                sleep_tlv = (MrvlIEtypes_sleep_param_t *) tlvbuf;
++                pm_cfg.flags |= PS_FLAG_SLEEP_PARAM;
++                pm_cfg.sleep_param.ctrl_bitmap =
++                    uap_le32_to_cpu(sleep_tlv->ctrl_bitmap);
++                pm_cfg.sleep_param.min_sleep =
++                    uap_le32_to_cpu(sleep_tlv->min_sleep);
++                pm_cfg.sleep_param.max_sleep =
++                    uap_le32_to_cpu(sleep_tlv->max_sleep);
++                break;
++            case TLV_TYPE_AP_INACT_SLEEP_PARAM:
++                inact_tlv = (MrvlIEtypes_inact_sleep_param_t *) tlvbuf;
++                pm_cfg.flags |= PS_FLAG_INACT_SLEEP_PARAM;
++                pm_cfg.inact_param.inactivity_to =
++                    uap_le32_to_cpu(inact_tlv->inactivity_to);
++                pm_cfg.inact_param.min_awake =
++                    uap_le32_to_cpu(inact_tlv->min_awake);
++                pm_cfg.inact_param.max_awake =
++                    uap_le32_to_cpu(inact_tlv->max_awake);
++                break;
++            }
++            tlv_buf_left -= tlv_len + sizeof(MrvlIEtypesHeader_t);
++            tlvbuf =
++                (MrvlIEtypesHeader_t *) ((u8 *) tlvbuf + tlv_len +
++                                         sizeof(MrvlIEtypesHeader_t));
++        }
++        /* Copy to user */
++        if (copy_to_user(req->ifr_data, &pm_cfg, sizeof(ps_mgmt))) {
++            PRINTM(ERROR, "Copy to user failed!\n");
++            LEAVE();
++            return -EFAULT;
++        }
++    }
++  done:
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function send bss_stop command to firmware
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @return      UAP_STATUS_SUCCESS on success, otherwise failure code
++ */
++static int
++uap_bss_stop(uap_private * priv)
++{
++    int ret = UAP_STATUS_SUCCESS;
++    u32 CmdSize;
++    HostCmd_DS_GEN *cmd;
++    uap_adapter *Adapter = priv->adapter;
++    struct sk_buff *skb;
++    ENTER();
++    if (Adapter->HardwareStatus != HWReady) {
++        PRINTM(ERROR, "uap_bss_stop:Hardware is not ready!\n");
++        ret = -EFAULT;
++        goto done;
++    }
++    skb = dev_alloc_skb(MRVDRV_SIZE_OF_CMD_BUFFER);
++    if (!skb) {
++        PRINTM(ERROR, "No free skb\n");
++        ret = -ENOMEM;
++        goto done;
++    }
++    CmdSize = sizeof(HostCmd_DS_GEN);
++    cmd = (HostCmd_DS_GEN *) (skb->data + INTF_HEADER_LEN);
++    cmd->Command = uap_cpu_to_le16(HOST_CMD_APCMD_BSS_STOP);
++    cmd->Size = uap_cpu_to_le16(CmdSize);
++    skb_put(skb, CmdSize + INTF_HEADER_LEN);
++    PRINTM(CMND, "APCMD_BSS_STOP\n");
++    if (UAP_STATUS_SUCCESS !=
++        uap_process_cmd(priv, skb, HostCmd_OPTION_WAITFORRSP_TIMEOUT)) {
++        PRINTM(ERROR, "Fail to process cmd BSS_STOP\n");
++        ret = -EFAULT;
++        goto done;
++    }
++  done:
++    LEAVE();
++    return ret;
++}
++
++/********************************************************
++              Global Functions
++********************************************************/
++/**
++ *  @brief This function send soft_reset command to firmware
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @return      UAP_STATUS_SUCCESS on success, otherwise failure code
++ */
++int
++uap_soft_reset(uap_private * priv)
++{
++    int ret = UAP_STATUS_SUCCESS;
++    u32 CmdSize;
++    HostCmd_DS_GEN *cmd;
++    uap_adapter *Adapter = priv->adapter;
++    struct sk_buff *skb;
++    ENTER();
++    ret = uap_bss_stop(priv);
++    if (ret != UAP_STATUS_SUCCESS)
++        goto done;
++    skb = dev_alloc_skb(MRVDRV_SIZE_OF_CMD_BUFFER);
++    if (!skb) {
++        PRINTM(ERROR, "No free skb\n");
++        ret = -ENOMEM;
++        goto done;
++    }
++    CmdSize = sizeof(HostCmd_DS_GEN);
++    cmd = (HostCmd_DS_GEN *) (skb->data + INTF_HEADER_LEN);
++    cmd->Command = uap_cpu_to_le16(HOST_CMD_APCMD_SOFT_RESET);
++    cmd->Size = uap_cpu_to_le16(CmdSize);
++    skb_put(skb, CmdSize + INTF_HEADER_LEN);
++    PRINTM(CMND, "APCMD_SOFT_RESET\n");
++    if (UAP_STATUS_SUCCESS !=
++        uap_process_cmd(priv, skb, HostCmd_OPTION_WAITFORSEND)) {
++        PRINTM(ERROR, "Fail to process cmd SOFT_RESET\n");
++        ret = -EFAULT;
++        goto done;
++    }
++    Adapter->SurpriseRemoved = TRUE;
++    /* delay to allow hardware complete reset */
++    os_sched_timeout(5);
++    if (priv->MediaConnected == TRUE) {
++        os_stop_queue(priv);
++        os_carrier_off(priv);
++        priv->MediaConnected = FALSE;
++    }
++    Adapter->CmdSize = 0;
++    Adapter->CmdWaitQWoken = TRUE;
++    wake_up_interruptible(&Adapter->cmdwait_q);
++    skb_queue_purge(&priv->adapter->tx_queue);
++    skb_queue_purge(&priv->adapter->cmd_queue);
++  done:
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function processes received packet and forwards it
++ *  to kernel/upper layer
++ *
++ *  @param priv    A pointer to uap_private
++ *  @param skb     A pointer to skb which includes the received packet
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++int
++uap_process_rx_packet(uap_private * priv, struct sk_buff *skb)
++{
++    int ret = UAP_STATUS_SUCCESS;
++    RxPD *pRxPD;
++    ENTER();
++    priv->adapter->ps_state = PS_STATE_AWAKE;
++    pRxPD = (RxPD *) skb->data;
++    endian_convert_RxPD(pRxPD);
++    DBG_HEXDUMP(DAT_D, "Rx", skb->data, MIN(skb->len, DATA_DUMP_LEN));
++    skb_pull(skb, pRxPD->RxPktOffset);
++    priv->stats.rx_packets++;
++    priv->stats.rx_bytes += skb->len;
++    os_upload_rx_packet(priv, skb);
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function opens the network device
++ *
++ *  @param dev     A pointer to net_device structure
++ *  @return        UAP_STATUS_SUCCESS
++ */
++static int
++uap_open(struct net_device *dev)
++{
++    uap_private *priv = (uap_private *) (uap_private *) netdev_priv(dev);
++    uap_adapter *Adapter = priv->adapter;
++    int i = 0;
++
++    ENTER();
++
++    /* On some systems the device open handler will be called before HW ready. */
++    /* Use the following flag check and wait function to work around the issue. */
++    while ((Adapter->HardwareStatus != HWReady) &&
++           (i < MAX_WAIT_DEVICE_READY_COUNT)) {
++        i++;
++        os_sched_timeout(100);
++    }
++    if (i >= MAX_WAIT_DEVICE_READY_COUNT) {
++        PRINTM(FATAL, "HW not ready, uap_open() return failure\n");
++        LEAVE();
++        return UAP_STATUS_FAILURE;
++    }
++
++    if (MODULE_GET == 0)
++        return UAP_STATUS_FAILURE;
++
++    priv->open = TRUE;
++    if (priv->MediaConnected == TRUE) {
++        os_carrier_on(priv);
++        os_start_queue(priv);
++    } else {
++        os_stop_queue(priv);
++        os_carrier_off(priv);
++    }
++    LEAVE();
++    return UAP_STATUS_SUCCESS;
++}
++
++/**
++ *  @brief This function closes the network device
++ *
++ *  @param dev     A pointer to net_device structure
++ *  @return        UAP_STATUS_SUCCESS
++ */
++static int
++uap_close(struct net_device *dev)
++{
++    uap_private *priv = (uap_private *) netdev_priv(dev);
++
++    ENTER();
++    skb_queue_purge(&priv->adapter->tx_queue);
++    os_stop_queue(priv);
++    os_carrier_off(priv);
++
++    MODULE_PUT;
++    priv->open = FALSE;
++    LEAVE();
++    return UAP_STATUS_SUCCESS;
++}
++
++/**
++ *  @brief This function returns the network statistics
++ *
++ *  @param dev     A pointer to uap_private structure
++ *  @return        A pointer to net_device_stats structure
++ */
++static struct net_device_stats *
++uap_get_stats(struct net_device *dev)
++{
++    uap_private *priv = (uap_private *) netdev_priv(dev);
++
++    return &priv->stats;
++}
++
++/**
++ *  @brief This function sets the MAC address to firmware.
++ *
++ *  @param dev     A pointer to uap_private structure
++ *  @param addr    MAC address to set
++ *  @return        UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++static int
++uap_set_mac_address(struct net_device *dev, void *addr)
++{
++    int ret = UAP_STATUS_SUCCESS;
++    uap_private *priv = (uap_private *) netdev_priv(dev);
++    struct sockaddr *pHwAddr = (struct sockaddr *) addr;
++    u32 CmdSize;
++    HostCmd_DS_COMMAND *cmd;
++    MrvlIEtypes_MacAddr_t *pMacAddrTlv;
++    uap_adapter *Adapter = priv->adapter;
++    struct sk_buff *skb;
++
++    ENTER();
++
++    /* Dump MAC address */
++    DBG_HEXDUMP(CMD_D, "Original MAC addr", dev->dev_addr, ETH_ALEN);
++    DBG_HEXDUMP(CMD_D, "New MAC addr", pHwAddr->sa_data, ETH_ALEN);
++    if (priv->open && (priv->MediaConnected == TRUE)) {
++        os_carrier_on(priv);
++        os_start_queue(priv);
++    }
++    skb = dev_alloc_skb(MRVDRV_SIZE_OF_CMD_BUFFER);
++    if (!skb) {
++        PRINTM(ERROR, "No free skb\n");
++        LEAVE();
++        return -ENOMEM;
++    }
++    CmdSize =
++        S_DS_GEN + sizeof(HostCmd_SYS_CONFIG) + sizeof(MrvlIEtypes_MacAddr_t);
++    cmd = (HostCmd_DS_COMMAND *) (skb->data + INTF_HEADER_LEN);
++    cmd->Command = uap_cpu_to_le16(HOST_CMD_APCMD_SYS_CONFIGURE);
++    cmd->Size = uap_cpu_to_le16(CmdSize);
++    cmd->params.sys_config.Action = uap_cpu_to_le16(ACTION_SET);
++    pMacAddrTlv =
++        (MrvlIEtypes_MacAddr_t *) ((u8 *) cmd + S_DS_GEN +
++                                   sizeof(HostCmd_SYS_CONFIG));
++    pMacAddrTlv->Header.Type = uap_cpu_to_le16(MRVL_AP_MAC_ADDRESS_TLV_ID);
++    pMacAddrTlv->Header.Len = uap_cpu_to_le16(ETH_ALEN);
++    memcpy(pMacAddrTlv->ApMacAddr, pHwAddr->sa_data, ETH_ALEN);
++    skb_put(skb, CmdSize + INTF_HEADER_LEN);
++    PRINTM(CMND, "set_mac_address\n");
++    if (UAP_STATUS_SUCCESS !=
++        uap_process_cmd(priv, skb, HostCmd_OPTION_WAITFORRSP_TIMEOUT)) {
++        PRINTM(ERROR, "Fail to set mac address\n");
++        LEAVE();
++        return -EFAULT;
++    }
++    if (!Adapter->CmdSize) {
++        PRINTM(ERROR, "Cmd Size is 0\n");
++        LEAVE();
++        return -EFAULT;
++    }
++    cmd = (HostCmd_DS_COMMAND *) Adapter->CmdBuf;
++    cmd->Result = uap_cpu_to_le16(cmd->Result);
++    if (cmd->Result != UAP_STATUS_SUCCESS) {
++        PRINTM(ERROR, "set mac addrress fail,cmd result=%x\n", cmd->Result);
++        ret = -EFAULT;
++    } else
++        memcpy(dev->dev_addr, pHwAddr->sa_data, ETH_ALEN);
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function handles the timeout of packet
++ *  transmission
++ *
++ *  @param dev     A pointer to net_device structure
++ *  @return        n/a
++ */
++static void
++uap_tx_timeout(struct net_device *dev)
++{
++    uap_private *priv = (uap_private *) netdev_priv(dev);
++
++    ENTER();
++
++    PRINTM(DATA, "Tx timeout\n");
++    UpdateTransStart(dev);
++    priv->num_tx_timeout++;
++    priv->adapter->IntCounter++;
++    wake_up_interruptible(&priv->MainThread.waitQ);
++
++    LEAVE();
++}
++
++/**
++ *  @brief This function handles packet transmission
++ *
++ *  @param skb     A pointer to sk_buff structure
++ *  @param dev     A pointer to net_device structure
++ *  @return        UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++static int
++uap_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++    uap_private *priv = (uap_private *) netdev_priv(dev);
++    int ret = UAP_STATUS_SUCCESS;
++
++    ENTER();
++    PRINTM(DATA, "Data <= kernel\n");
++    DBG_HEXDUMP(DAT_D, "Tx", skb->data, MIN(skb->len, DATA_DUMP_LEN));
++    /* skb sanity check */
++    if (!skb->len || (skb->len > MRVDRV_MAXIMUM_ETH_PACKET_SIZE)) {
++        PRINTM(ERROR, "Tx Error: Bad skb length %d : %d\n", skb->len,
++               MRVDRV_MAXIMUM_ETH_PACKET_SIZE);
++        priv->stats.tx_dropped++;
++        kfree(skb);
++        goto done;
++    }
++    skb_queue_tail(&priv->adapter->tx_queue, skb);
++    wake_up_interruptible(&priv->MainThread.waitQ);
++    if (skb_queue_len(&priv->adapter->tx_queue) > TX_HIGH_WATERMARK) {
++        UpdateTransStart(dev);
++        os_stop_queue(priv);
++    }
++  done:
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief ioctl function - entry point
++ *
++ *  @param dev      A pointer to net_device structure
++ *  @param req      A pointer to ifreq structure
++ *  @param cmd      command
++ *  @return         UAP_STATUS_SUCCESS--success, otherwise fail
++ */
++static int
++uap_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
++{
++    int ret = UAP_STATUS_SUCCESS;
++
++    ENTER();
++
++    PRINTM(CMND, "uap_do_ioctl: ioctl cmd = 0x%x\n", cmd);
++
++    switch (cmd) {
++    case UAPHOSTCMD:
++        ret = uap_hostcmd_ioctl(dev, req);
++        break;
++    case UAP_POWER_MODE:
++        ret = uap_power_mode_ioctl(dev, req);
++        break;
++    default:
++        ret = -EINVAL;
++        break;
++    }
++
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function handles events generated by firmware
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @param payload A pointer to payload buffer
++ *  @param len           Length of the payload
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++int
++uap_process_event(uap_private * priv, u8 * payload, uint len)
++{
++    int ret = UAP_STATUS_SUCCESS;
++    uap_adapter *Adapter = priv->adapter;
++    struct sk_buff *skb = NULL;
++    struct nlmsghdr *nlh = NULL;
++    struct sock *sk = Adapter->nl_sk;
++    AP_Event *pEvent;
++
++    ENTER();
++    Adapter->ps_state = PS_STATE_AWAKE;
++    if (len > NL_MAX_PAYLOAD) {
++        PRINTM(ERROR, "event size is too big!!! len=%d\n", len);
++        ret = UAP_STATUS_FAILURE;
++        goto done;
++    }
++    pEvent = (AP_Event *) payload;
++    PRINTM(CMND, "Event: %d\n", pEvent->EventId);
++    switch (pEvent->EventId) {
++    case MICRO_AP_EV_ID_BSS_START:
++        memcpy(priv->uap_dev.netdev->dev_addr, pEvent->MacAddr, ETH_ALEN);
++        DBG_HEXDUMP(CMD_D, "BSS MAC addr", priv->uap_dev.netdev->dev_addr,
++                    ETH_ALEN);
++        break;
++    case MICRO_AP_EV_BSS_ACTIVE:
++        // carrier on
++        priv->MediaConnected = TRUE;
++        os_carrier_on(priv);
++        os_start_queue(priv);
++        break;
++    case MICRO_AP_EV_BSS_IDLE:
++        os_stop_queue(priv);
++        os_carrier_off(priv);
++        priv->MediaConnected = FALSE;
++        break;
++    case EVENT_PS_AWAKE:
++        PRINTM(CMND, "UAP: PS_AWAKE\n");
++        Adapter->ps_state = PS_STATE_AWAKE;
++        Adapter->WakeupTries = 0;
++        break;
++    case EVENT_PS_SLEEP:
++        PRINTM(CMND, "UAP: PS_SLEEP\n");
++        Adapter->ps_state = PS_STATE_PRE_SLEEP;
++        break;
++    default:
++        break;
++    }
++    if ((pEvent->EventId == EVENT_PS_AWAKE) ||
++        (pEvent->EventId == EVENT_PS_SLEEP))
++        goto done;
++    if (sk) {
++        /* Allocate skb */
++        if (!(skb = alloc_skb(NLMSG_SPACE(NL_MAX_PAYLOAD), GFP_ATOMIC))) {
++            PRINTM(ERROR, "Could not allocate skb for netlink.\n");
++            ret = UAP_STATUS_FAILURE;
++            goto done;
++        }
++        nlh = (struct nlmsghdr *) skb->data;
++        nlh->nlmsg_len = NLMSG_SPACE(len);
++
++        /* From kernel */
++        nlh->nlmsg_pid = 0;
++        nlh->nlmsg_flags = 0;
++
++        /* Data */
++        skb_put(skb, nlh->nlmsg_len);
++        memcpy(NLMSG_DATA(nlh), payload, len);
++
++        /* From Kernel */
++        NETLINK_CB(skb).portid = 0;
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++        /* Multicast message */
++        NETLINK_CB(skb).dst_pid = 0;
++#endif
++
++        /* Multicast group number */
++        NETLINK_CB(skb).dst_group = NL_MULTICAST_GROUP;
++
++        /* Send message */
++        netlink_broadcast(sk, skb, 0, NL_MULTICAST_GROUP, GFP_KERNEL);
++
++        ret = UAP_STATUS_SUCCESS;
++    } else {
++        PRINTM(ERROR, "Could not send event through NETLINK. Link down.\n");
++        ret = UAP_STATUS_FAILURE;
++    }
++  done:
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function handles the interrupt. it will change PS
++ *  state if applicable. it will wake up main_thread to handle
++ *  the interrupt event as well.
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @return        n/a
++ */
++void
++uap_interrupt(uap_private * priv)
++{
++    ENTER();
++    priv->adapter->IntCounter++;
++    priv->adapter->WakeupTries = 0;
++    PRINTM(INFO, "*\n");
++    wake_up_interruptible(&priv->MainThread.waitQ);
++
++    LEAVE();
++
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29)
++/** Network device handlers */
++static const struct net_device_ops uap_netdev_ops = {
++    .ndo_open = uap_open,
++    .ndo_start_xmit = uap_hard_start_xmit,
++    .ndo_stop = uap_close,
++    .ndo_do_ioctl = uap_do_ioctl,
++    .ndo_set_mac_address = uap_set_mac_address,
++    .ndo_tx_timeout = uap_tx_timeout,
++    .ndo_get_stats = uap_get_stats,
++};
++#endif
++
++/**
++ * @brief This function adds the card. it will probe the
++ * card, allocate the uap_priv and initialize the device.
++ *
++ *  @param card    A pointer to card
++ *  @return        A pointer to uap_private structure
++ */
++uap_private *
++uap_add_card(void *card)
++{
++    struct net_device *dev = NULL;
++    uap_private *priv = NULL;
++
++    ENTER();
++
++    if (OS_ACQ_SEMAPHORE_BLOCK(&AddRemoveCardSem))
++        goto exit_sem_err;
++
++    /* Allocate an Ethernet device */
++    if (!(dev = alloc_etherdev(sizeof(uap_private)))) {
++        PRINTM(FATAL, "Init ethernet device failed!\n");
++        goto error;
++    }
++    priv = (uap_private *) netdev_priv(dev);
++
++    /* Allocate name */
++    if (dev_alloc_name(dev, "uap%d") < 0) {
++        PRINTM(ERROR, "Could not allocate device name!\n");
++        goto error;
++    }
++
++    /* Allocate buffer for uap_adapter */
++    if (!(priv->adapter = kmalloc(sizeof(uap_adapter), GFP_KERNEL))) {
++        PRINTM(FATAL, "Allocate buffer for uap_adapter failed!\n");
++        goto error;
++    }
++    memset(priv->adapter, 0, sizeof(uap_adapter));
++
++    priv->uap_dev.netdev = dev;
++    priv->uap_dev.card = card;
++    priv->MediaConnected = FALSE;
++    uappriv = priv;
++    ((struct sdio_mmc_card *) card)->priv = priv;
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
++    SET_MODULE_OWNER(dev);
++#endif
++
++    /* Setup the OS Interface to our functions */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,29)
++    dev->open = uap_open;
++    dev->stop = uap_close;
++    dev->hard_start_xmit = uap_hard_start_xmit;
++    dev->tx_timeout = uap_tx_timeout;
++    dev->get_stats = uap_get_stats;
++    dev->do_ioctl = uap_do_ioctl;
++    dev->set_mac_address = uap_set_mac_address;
++    dev->set_multicast_list = uap_set_multicast_list;
++#else
++    dev->netdev_ops = &uap_netdev_ops;
++#endif
++    dev->watchdog_timeo = MRVDRV_DEFAULT_WATCHDOG_TIMEOUT;
++    dev->hard_header_len += sizeof(TxPD) + INTF_HEADER_LEN;
++    dev->hard_header_len += HEADER_ALIGNMENT;
++#define NETIF_F_DYNALLOC 16
++    dev->features |= NETIF_F_DYNALLOC;
++    dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
++
++    /* Init SW */
++    if (uap_init_sw(priv)) {
++        PRINTM(FATAL, "Software Init Failed\n");
++        goto error;
++    }
++
++    PRINTM(INFO, "Starting kthread...\n");
++    priv->MainThread.priv = priv;
++    spin_lock_init(&priv->driver_lock);
++    uap_create_thread(uap_service_main_thread, &priv->MainThread,
++                      "uap_main_service");
++    while (priv->MainThread.pid == 0) {
++        os_sched_timeout(2);
++    }
++
++    /* Register the device */
++    if (sbi_register_dev(priv) < 0) {
++        PRINTM(FATAL, "Failed to register uap device!\n");
++        goto err_registerdev;
++    }
++#ifdef FW_DNLD_NEEDED
++    SET_NETDEV_DEV(dev, priv->hotplug_device);
++#endif
++
++    /* Init FW and HW */
++    if (uap_init_fw(priv)) {
++        PRINTM(FATAL, "Firmware Init Failed\n");
++        goto err_init_fw;
++    }
++
++    priv->uap_dev.cmd_sent = FALSE;
++    priv->uap_dev.data_sent = FALSE;
++
++    /* Get mac address from firmware */
++    if (uap_get_mac_address(priv)) {
++        PRINTM(FATAL, "Fail to get mac address\n");
++        goto err_init_fw;
++    }
++    /* Register network device */
++    if (register_netdev(dev)) {
++        printk(KERN_ERR "Cannot register network device!\n");
++        goto err_init_fw;
++    }
++#ifdef CONFIG_PROC_FS
++    uap_proc_entry(priv, dev);
++    uap_debug_entry(priv, dev);
++#endif /* CPNFIG_PROC_FS */
++    OS_REL_SEMAPHORE(&AddRemoveCardSem);
++
++    LEAVE();
++    return priv;
++  err_init_fw:
++    sbi_unregister_dev(priv);
++  err_registerdev:
++    ((struct sdio_mmc_card *) card)->priv = NULL;
++    /* Stop the thread servicing the interrupts */
++    priv->adapter->SurpriseRemoved = TRUE;
++    wake_up_interruptible(&priv->MainThread.waitQ);
++    while (priv->MainThread.pid) {
++        os_sched_timeout(1);
++    }
++  error:
++    if (dev) {
++        if (dev->reg_state == NETREG_REGISTERED)
++            unregister_netdev(dev);
++        if (priv->adapter)
++            uap_free_adapter(priv);
++        free_netdev(dev);
++        uappriv = NULL;
++    }
++    OS_REL_SEMAPHORE(&AddRemoveCardSem);
++  exit_sem_err:
++    LEAVE();
++    return NULL;
++}
++
++/**
++ *  @brief This function removes the card.
++ *
++ *  @param card    A pointer to card
++ *  @return        UAP_STATUS_SUCCESS
++ */
++int
++uap_remove_card(void *card)
++{
++    uap_private *priv = uappriv;
++    uap_adapter *Adapter;
++    struct net_device *dev;
++
++    ENTER();
++
++    if (OS_ACQ_SEMAPHORE_BLOCK(&AddRemoveCardSem))
++        goto exit_sem_err;
++
++    if (!priv || !(Adapter = priv->adapter)) {
++        goto exit_remove;
++    }
++    Adapter->SurpriseRemoved = TRUE;
++    if (Adapter->cmd_pending == TRUE) {
++        /* Wake up cmd Q */
++        Adapter->CmdWaitQWoken = TRUE;
++        wake_up_interruptible(&Adapter->cmdwait_q);
++    }
++    dev = priv->uap_dev.netdev;
++    if (priv->MediaConnected == TRUE) {
++        os_stop_queue(priv);
++        os_carrier_off(priv);
++        priv->MediaConnected = FALSE;
++    }
++    Adapter->CmdSize = 0;
++    Adapter->CmdWaitQWoken = TRUE;
++    wake_up_interruptible(&Adapter->cmdwait_q);
++    skb_queue_purge(&priv->adapter->tx_queue);
++    skb_queue_purge(&priv->adapter->cmd_queue);
++
++    /* Disable interrupts on the card */
++    sbi_disable_host_int(priv);
++    PRINTM(INFO, "netdev_finish_unregister: %s%s.\n", dev->name,
++           (dev->features & NETIF_F_DYNALLOC) ? "" : ", old style");
++    unregister_netdev(dev);
++    PRINTM(INFO, "Unregister finish\n");
++    wake_up_interruptible(&priv->MainThread.waitQ);
++    while (priv->MainThread.pid) {
++        os_sched_timeout(1);
++    }
++
++    if ((Adapter->nl_sk) && ((Adapter->nl_sk)->sk_socket)) {
++        sock_release((Adapter->nl_sk)->sk_socket);
++        Adapter->nl_sk = NULL;
++    }
++#ifdef CONFIG_PROC_FS
++    uap_debug_remove(priv);
++    uap_proc_remove(priv);
++#endif
++    sbi_unregister_dev(priv);
++    PRINTM(INFO, "Free Adapter\n");
++    uap_free_adapter(priv);
++    priv->uap_dev.netdev = NULL;
++    free_netdev(dev);
++    uappriv = NULL;
++
++  exit_remove:
++    OS_REL_SEMAPHORE(&AddRemoveCardSem);
++  exit_sem_err:
++    LEAVE();
++    return UAP_STATUS_SUCCESS;
++}
++
++/**
++ *  @brief This function initializes module.
++ *
++ *  @return    UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++static int __init
++uap_init_module(void)
++{
++    int ret = UAP_STATUS_SUCCESS;
++    ENTER();
++
++    OS_INIT_SEMAPHORE(&AddRemoveCardSem);
++    ret = sbi_register();
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function cleans module
++ *
++ *  @return        n/a
++ */
++static void __exit
++uap_cleanup_module(void)
++{
++    ENTER();
++
++    if (OS_ACQ_SEMAPHORE_BLOCK(&AddRemoveCardSem))
++        goto exit_sem_err;
++
++    if ((uappriv) && (uappriv->adapter)) {
++        uap_func_shutdown(uappriv);
++    }
++    OS_REL_SEMAPHORE(&AddRemoveCardSem);
++  exit_sem_err:
++    sbi_unregister();
++    LEAVE();
++}
++
++module_init(uap_init_module);
++module_exit(uap_cleanup_module);
++module_param(helper_name, charp, 0);
++MODULE_PARM_DESC(helper_name, "Helper name");
++module_param(fw_name, charp, 0);
++MODULE_PARM_DESC(fw_name, "Firmware name");
++
++MODULE_DESCRIPTION("M-UAP Driver");
++MODULE_AUTHOR("Marvell International Ltd.");
++MODULE_VERSION(DRIVER_VERSION);
++MODULE_LICENSE("GPL");
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/libertas_uap/uap_proc.c backports-3.18.1-1/drivers/net/wireless/libertas_uap/uap_proc.c
+--- backports-3.18.1-1.org/drivers/net/wireless/libertas_uap/uap_proc.c        1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/libertas_uap/uap_proc.c    2014-12-29 20:37:43.952431125 +0100
+@@ -0,0 +1,258 @@
++/** @file uap_proc.c
++  * @brief This file contains functions for proc file.
++  *
++  * Copyright (C) 2008-2009, Marvell International Ltd.
++  *
++  * This software file (the "File") is distributed by Marvell International
++  * Ltd. under the terms of the GNU General Public License Version 2, June 1991
++  * (the "License").  You may use, redistribute and/or modify this File in
++  * accordance with the terms and conditions of the License, a copy of which
++  * is available along with the File in the gpl.txt file or by writing to
++  * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++  * 02111-1307 or on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
++  *
++  * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
++  * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
++  * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
++  * this warranty disclaimer.
++  *
++  */
++#ifdef CONFIG_PROC_FS
++#include <linux/proc_fs.h>
++#include <linux/seq_file.h>
++#include "uap_headers.h"
++
++/** /proc directory root */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)
++#define PROC_DIR NULL
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
++#define PROC_DIR &proc_root
++#else
++#define PROC_DIR proc_net
++#endif
++
++/********************************************************
++              Local Variables
++********************************************************/
++
++/********************************************************
++              Global Variables
++********************************************************/
++
++/********************************************************
++              Local Functions
++********************************************************/
++
++static int uap_info_proc_show(struct seq_file *s, void *data) {
++    int i;
++    struct net_device *netdev = (struct net_device*)s->private;
++    struct netdev_hw_addr *ha;
++    uap_private *priv = (uap_private *) netdev_priv(netdev);
++
++    seq_printf(s, "driver_name = " "\"uap\"\n");
++    seq_printf(s, "driver_version = %s-(FP%s)", DRIVER_VERSION, FPNUM);
++    seq_printf(s, "\nInterfaceName=\"%s\"\n", netdev->name);
++
++    seq_printf(s, "State=\"%s\"\n",
++                 ((priv->MediaConnected ==
++                   FALSE) ? "Disconnected" : "Connected"));
++    seq_printf(s, "MACAddress=\"%02x:%02x:%02x:%02x:%02x:%02x\"\n",
++                 netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2],
++                 netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]);
++    i = 0;
++    netdev_for_each_mc_addr(ha, netdev) {
++        ++i;
++    }
++    seq_printf(s, "MCCount=\"%d\"\n", i);
++
++    /*
++     * Put out the multicast list
++     */
++    i = 0;
++    netdev_for_each_mc_addr(ha, netdev) {
++        seq_printf(s,
++                     "MCAddr[%d]=\"%02x:%02x:%02x:%02x:%02x:%02x\"\n",
++                     i++,
++                     ha->addr[0], ha->addr[1],
++                     ha->addr[2], ha->addr[3],
++                     ha->addr[4], ha->addr[5]);
++    }
++
++    seq_printf(s, "num_tx_bytes = %lu\n", priv->stats.tx_bytes);
++    seq_printf(s, "num_rx_bytes = %lu\n", priv->stats.rx_bytes);
++    seq_printf(s, "num_tx_pkts = %lu\n", priv->stats.tx_packets);
++    seq_printf(s, "num_rx_pkts = %lu\n", priv->stats.rx_packets);
++    seq_printf(s, "num_tx_pkts_dropped = %lu\n", priv->stats.tx_dropped);
++    seq_printf(s, "num_rx_pkts_dropped = %lu\n", priv->stats.rx_dropped);
++    seq_printf(s, "num_tx_pkts_err = %lu\n", priv->stats.tx_errors);
++    seq_printf(s, "num_rx_pkts_err = %lu\n", priv->stats.rx_errors);
++    seq_printf(s, "num_tx_timeout = %u\n", priv->num_tx_timeout);
++    seq_printf(s, "carrier %s\n",
++                 ((netif_carrier_ok(priv->uap_dev.netdev)) ? "on" : "off"));
++    seq_printf(s, "tx queue %s\n",
++                 ((netif_queue_stopped(priv->uap_dev.netdev)) ? "stopped" :
++                  "started"));
++
++    return 0;
++}
++
++static int uap_info_proc_open(struct inode *inode, struct file *file) {
++      return single_open(file, uap_info_proc_show, PDE_DATA(inode));
++}
++
++static int uap_hwstatus_proc_show(struct seq_file *s, void *data) {
++    struct net_device *netdev = (struct net_device*)s->private;
++    uap_private *priv = (uap_private *) netdev_priv(netdev);
++
++    MODULE_GET;
++    seq_printf(s, "%d\n", priv->adapter->HardwareStatus);
++    MODULE_PUT;
++
++    return 0;
++}
++
++static int uap_hwstatus_proc_open(struct inode *inode, struct file *file) {
++      return single_open(file, uap_hwstatus_proc_show, PDE_DATA(inode));
++}
++
++static ssize_t uap_hwstatus_proc_write(struct file *file, const char __user *buffer, size_t count, loff_t *data) {
++      struct net_device *netdev = (struct net_device *)PDE_DATA(file_inode(file));
++      uap_private *priv = (uap_private *) netdev_priv(netdev);
++
++      int hwstatus;
++      char value[10];
++
++      if (count > sizeof(value))
++              return count;
++
++      if (copy_from_user(&value, buffer, count))
++              return -EFAULT;
++
++      hwstatus = string_to_number(value);
++      switch (hwstatus) {
++      case HWReset:
++              PRINTM(MSG, "reset hw\n");
++              uap_soft_reset(priv);
++              priv->adapter->HardwareStatus = HWReset;
++              break;
++      default:
++              break;
++      }
++
++      MODULE_PUT;
++      return count;
++}
++
++static const struct file_operations uap_info_proc_fops = {
++      .owner   = THIS_MODULE,
++      .open    = uap_info_proc_open,
++      .read    = seq_read,
++      .llseek  = seq_lseek,
++      .release = single_release,
++};
++
++static const struct file_operations uap_hwstatus_proc_fops = {
++      .owner   = THIS_MODULE,
++      .open    = uap_hwstatus_proc_open,
++      .read    = seq_read,
++      .llseek  = seq_lseek,
++      .release = single_release,
++      .write   = uap_hwstatus_proc_write,
++};
++
++/********************************************************
++              Global Functions
++********************************************************/
++/**
++ *  @brief create uap proc file
++ *
++ *  @param priv          pointer uap_private
++ *  @param dev     pointer net_device
++ *  @return      N/A
++ */
++void
++uap_proc_entry(uap_private * priv, struct net_device *dev)
++{
++    PRINTM(INFO, "Creating Proc Interface\n");
++    /* Check if uap directory already exists */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)
++    struct proc_dir_entry *r = PROC_DIR;
++
++    for (r = r->subdir; r; r = r->next) {
++        if (r->namelen && !strcmp("uap", r->name)) {
++            /* Directory exists */
++            PRINTM(WARN, "proc directory already exists!\n");
++            priv->proc_uap = r;
++            break;
++        }
++    }
++#endif
++    if (!priv->proc_uap) {
++        priv->proc_uap = proc_mkdir("uap", PROC_DIR);
++        if (!priv->proc_uap)
++            return;
++    }
++    priv->proc_entry = proc_mkdir(dev->name, priv->proc_uap);
++
++    if (priv->proc_entry) {
++      proc_create_data("info", 0644, priv->proc_entry, &uap_info_proc_fops, dev);
++      proc_create_data("hwinfo", 0644, priv->proc_entry, &uap_hwstatus_proc_fops, dev);
++    }
++}
++
++/**
++ *  @brief remove proc file
++ *
++ *  @param priv          pointer uap_private
++ *  @return      N/A
++ */
++void
++uap_proc_remove(uap_private * priv)
++{
++    if (priv->proc_uap) {
++        if (priv->proc_entry) {
++            remove_proc_entry("info", priv->proc_entry);
++            remove_proc_entry("hwstatus", priv->proc_entry);
++        }
++        remove_proc_entry(priv->uap_dev.netdev->name, priv->proc_uap);
++    }
++}
++
++/**
++ *  @brief convert string to number
++ *
++ *  @param s     pointer to numbered string
++ *  @return      converted number from string s
++ */
++int
++string_to_number(char *s)
++{
++    int r = 0;
++    int base = 0;
++    int pn = 1;
++
++    if (strncmp(s, "-", 1) == 0) {
++        pn = -1;
++        s++;
++    }
++    if ((strncmp(s, "0x", 2) == 0) || (strncmp(s, "0X", 2) == 0)) {
++        base = 16;
++        s += 2;
++    } else
++        base = 10;
++
++    for (s = s; *s != 0; s++) {
++        if ((*s >= '0') && (*s <= '9'))
++            r = (r * base) + (*s - '0');
++        else if ((*s >= 'A') && (*s <= 'F'))
++            r = (r * base) + (*s - 'A' + 10);
++        else if ((*s >= 'a') && (*s <= 'f'))
++            r = (r * base) + (*s - 'a' + 10);
++        else
++            break;
++    }
++
++    return (r * pn);
++}
++
++#endif
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/libertas_uap/uap_sdio_mmc.c backports-3.18.1-1/drivers/net/wireless/libertas_uap/uap_sdio_mmc.c
+--- backports-3.18.1-1.org/drivers/net/wireless/libertas_uap/uap_sdio_mmc.c    1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/libertas_uap/uap_sdio_mmc.c        2014-12-29 20:37:43.955764567 +0100
+@@ -0,0 +1,1428 @@
++/** @file uap_sdio_mmc.c
++ *  @brief This file contains SDIO IF (interface) module
++ *  related functions.
++ *
++ * Copyright (C) 2007-2009, Marvell International Ltd.
++ *
++ * This software file (the "File") is distributed by Marvell International
++ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
++ * (the "License").  You may use, redistribute and/or modify this File in
++ * accordance with the terms and conditions of the License, a copy of which
++ * is available along with the File in the gpl.txt file or by writing to
++ * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++ * 02111-1307 or on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
++ *
++ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
++ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
++ * this warranty disclaimer.
++ *
++ */
++/****************************************************
++Change log:
++****************************************************/
++
++#include      "uap_sdio_mmc.h"
++
++#include <linux/firmware.h>
++
++/** define SDIO block size */
++/* We support up to 480-byte block size due to FW buffer limitation. */
++#define SD_BLOCK_SIZE         256
++
++/** define allocated buffer size */
++#define ALLOC_BUF_SIZE                (((MAX(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, \
++                                      MRVDRV_SIZE_OF_CMD_BUFFER) + INTF_HEADER_LEN \
++                                      + SD_BLOCK_SIZE - 1) / SD_BLOCK_SIZE) * SD_BLOCK_SIZE)
++
++/** Max retry number of CMD53 write */
++#define MAX_WRITE_IOMEM_RETRY 2
++
++/********************************************************
++              Local Variables
++********************************************************/
++
++/** SDIO Rx unit */
++static u8 sdio_rx_unit = 0;
++
++/**Interrupt status */
++static u8 sd_ireg = 0;
++/********************************************************
++              Global Variables
++********************************************************/
++extern u8 *helper_name;
++extern u8 *fw_name;
++/** Default helper name */
++#define DEFAULT_HELPER_NAME "mrvl/helper_sd.bin"
++/** Default firmware name */
++#define DEFAULT_FW_NAME "mrvl/sd8688_ap.bin"
++
++/********************************************************
++              Local Functions
++********************************************************/
++/**
++ *  @brief This function reads the IO register.
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @param reg           register to be read
++ *  @param dat           A pointer to variable that keeps returned value
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++static int
++sbi_read_ioreg(uap_private * priv, u32 reg, u8 * dat)
++{
++    struct sdio_mmc_card *card;
++    int ret = UAP_STATUS_FAILURE;
++
++    ENTER();
++
++    card = priv->uap_dev.card;
++    if (!card || !card->func) {
++        PRINTM(ERROR, "sbi_read_ioreg(): card or function is NULL!\n");
++        goto done;
++    }
++
++    *dat = sdio_readb(card->func, reg, &ret);
++    if (ret) {
++        PRINTM(ERROR, "sbi_read_ioreg(): sdio_readb failed! ret=%d\n", ret);
++        goto done;
++    }
++
++    PRINTM(INFO, "sbi_read_ioreg() priv=%p func=%d reg=%#x dat=%#x\n", priv,
++           card->func->num, reg, *dat);
++
++  done:
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function writes the IO register.
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @param reg           register to be written
++ *  @param dat           the value to be written
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++static int
++sbi_write_ioreg(uap_private * priv, u32 reg, u8 dat)
++{
++    struct sdio_mmc_card *card;
++    int ret = UAP_STATUS_FAILURE;
++
++    ENTER();
++
++    card = priv->uap_dev.card;
++    if (!card || !card->func) {
++        PRINTM(ERROR, "sbi_write_ioreg(): card or function is NULL!\n");
++        goto done;
++    }
++
++    PRINTM(INFO, "sbi_write_ioreg() priv=%p func=%d reg=%#x dat=%#x\n", priv,
++           card->func->num, reg, dat);
++
++    sdio_writeb(card->func, dat, reg, &ret);
++    if (ret) {
++        PRINTM(ERROR, "sbi_write_ioreg(): sdio_readb failed! ret=%d\n", ret);
++        goto done;
++    }
++
++  done:
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function get rx_unit value
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++static int
++sd_get_rx_unit(uap_private * priv)
++{
++    int ret = UAP_STATUS_SUCCESS;
++    u8 reg;
++
++    ENTER();
++
++    ret = sbi_read_ioreg(priv, CARD_RX_UNIT_REG, &reg);
++    if (ret == UAP_STATUS_SUCCESS)
++        sdio_rx_unit = reg;
++
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function reads rx length
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @param dat           A pointer to keep returned data
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++static int
++sd_read_rx_len(uap_private * priv, u16 * dat)
++{
++    int ret = UAP_STATUS_SUCCESS;
++    u8 reg;
++
++    ENTER();
++
++    ret = sbi_read_ioreg(priv, CARD_RX_LEN_REG, &reg);
++    if (ret == UAP_STATUS_SUCCESS)
++        *dat = (u16) reg << sdio_rx_unit;
++
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function reads fw status registers
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @param dat           A pointer to keep returned data
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++static int
++sd_read_firmware_status(uap_private * priv, u16 * dat)
++{
++    int ret = UAP_STATUS_SUCCESS;
++    u8 fws0;
++    u8 fws1;
++
++    ENTER();
++
++    ret = sbi_read_ioreg(priv, CARD_FW_STATUS0_REG, &fws0);
++    if (ret < 0) {
++        LEAVE();
++        return UAP_STATUS_FAILURE;
++    }
++
++    ret = sbi_read_ioreg(priv, CARD_FW_STATUS1_REG, &fws1);
++    if (ret < 0) {
++        LEAVE();
++        return UAP_STATUS_FAILURE;
++    }
++
++    *dat = (((u16) fws1) << 8) | fws0;
++
++    LEAVE();
++    return UAP_STATUS_SUCCESS;
++}
++
++/**
++ *  @brief This function polls the card status register.
++ *
++ *  @param priv       A pointer to uap_private structure
++ *  @param bits       the bit mask
++ *  @return           UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++static int
++mv_sdio_poll_card_status(uap_private * priv, u8 bits)
++{
++    int tries;
++    u8 cs;
++
++    ENTER();
++
++    for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
++        if (sbi_read_ioreg(priv, CARD_STATUS_REG, &cs) < 0)
++            break;
++        else if ((cs & bits) == bits) {
++            LEAVE();
++            return UAP_STATUS_SUCCESS;
++        }
++        udelay(10);
++    }
++
++    PRINTM(WARN, "mv_sdio_poll_card_status failed, tries = %d\n", tries);
++
++    LEAVE();
++    return UAP_STATUS_FAILURE;
++}
++
++/**
++ *  @brief This function set the sdio bus width.
++ *
++ *  @param priv       A pointer to uap_private structure
++ *  @param mode       1--1 bit mode, 4--4 bit mode
++ *  @return           UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++#if 0
++static int
++sdio_set_bus_width(uap_private * priv, u8 mode)
++{
++    ENTER();
++    LEAVE();
++    return UAP_STATUS_SUCCESS;
++}
++#endif
++
++/**
++ *  @brief This function reads data from the card.
++ *
++ *  @param priv       A pointer to uap_private structure
++ *  @return           UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++static int
++sd_card_to_host(uap_private * priv)
++{
++    int ret = UAP_STATUS_SUCCESS;
++    u16 buf_len = 0;
++    int buf_block_len;
++    int blksz;
++    struct sk_buff *skb = NULL;
++    u16 type;
++    u8 *payload = NULL;
++    struct sdio_mmc_card *card = priv->uap_dev.card;
++
++    ENTER();
++
++    if (!card || !card->func) {
++        PRINTM(ERROR, "card or function is NULL!\n");
++        ret = UAP_STATUS_FAILURE;
++        goto exit;
++    }
++
++    /* Read the length of data to be transferred */
++    ret = sd_read_rx_len(priv, &buf_len);
++    if (ret < 0) {
++        PRINTM(ERROR, "card_to_host, read scratch reg failed\n");
++        ret = UAP_STATUS_FAILURE;
++        goto exit;
++    }
++
++    /* Allocate buffer */
++    blksz = SD_BLOCK_SIZE;
++    buf_block_len = (buf_len + blksz - 1) / blksz;
++    if (buf_len <= INTF_HEADER_LEN || (buf_block_len * blksz) > ALLOC_BUF_SIZE) {
++        PRINTM(ERROR, "card_to_host, invalid packet length: %d\n", buf_len);
++        ret = UAP_STATUS_FAILURE;
++        goto exit;
++    }
++#ifdef PXA3XX_DMA_ALIGN
++    skb = dev_alloc_skb(buf_block_len * blksz + PXA3XX_DMA_ALIGNMENT);
++#else
++    skb = dev_alloc_skb(buf_block_len * blksz);
++#endif
++    if (skb == NULL) {
++        PRINTM(WARN, "No free skb\n");
++        goto exit;
++    }
++#ifdef PXA3XX_DMA_ALIGN
++    if ((u32) skb->data & (PXA3XX_DMA_ALIGNMENT - 1)) {
++        skb_put(skb, (u32) skb->data & (PXA3XX_DMA_ALIGNMENT - 1));
++        skb_pull(skb, (u32) skb->data & (PXA3XX_DMA_ALIGNMENT - 1));
++    }
++#endif /* PXA3XX_DMA_ALIGN */
++
++    payload = skb->tail;
++    ret = sdio_readsb(card->func, payload, priv->uap_dev.ioport,
++                      buf_block_len * blksz);
++    if (ret < 0) {
++        PRINTM(ERROR, "card_to_host, read iomem failed: %d\n", ret);
++        ret = UAP_STATUS_FAILURE;
++        goto exit;
++    }
++    HEXDUMP("SDIO Blk Rd", payload, blksz * buf_block_len);
++    /*
++     * This is SDIO specific header
++     *  u16 length,
++     *  u16 type (MV_TYPE_DAT = 0, MV_TYPE_CMD = 1, MV_TYPE_EVENT = 3)
++     */
++    buf_len = uap_le16_to_cpu(*(u16 *) & payload[0]);
++    type = uap_le16_to_cpu(*(u16 *) & payload[2]);
++    switch (type) {
++    case MV_TYPE_EVENT:
++        skb_put(skb, buf_len);
++        skb_pull(skb, INTF_HEADER_LEN);
++        uap_process_event(priv, skb->data, skb->len);
++        kfree_skb(skb);
++        skb = NULL;
++        break;
++    case MV_TYPE_CMD:
++        skb_put(skb, buf_len);
++        skb_pull(skb, INTF_HEADER_LEN);
++        priv->adapter->cmd_pending = FALSE;
++        if (priv->adapter->cmd_wait_option ==
++            HostCmd_OPTION_WAITFORRSP_SLEEPCONFIRM) {
++            priv->adapter->cmd_wait_option = FALSE;
++            uap_process_sleep_confirm_resp(priv, skb->data, skb->len);
++        } else if (priv->adapter->cmd_wait_option) {
++            memcpy(priv->adapter->CmdBuf, skb->data, skb->len);
++            priv->adapter->CmdSize = skb->len;
++            priv->adapter->cmd_wait_option = FALSE;
++            priv->adapter->CmdWaitQWoken = TRUE;
++            wake_up_interruptible(&priv->adapter->cmdwait_q);
++        }
++        kfree_skb(skb);
++        skb = NULL;
++        break;
++    case MV_TYPE_DAT:
++        skb_put(skb, buf_len);
++        skb_pull(skb, INTF_HEADER_LEN);
++        uap_process_rx_packet(priv, skb);
++        break;
++    default:
++        priv->stats.rx_errors++;
++        priv->stats.rx_dropped++;
++        /* Driver specified event and command resp should be handle here */
++        PRINTM(INFO, "Unknown PKT type:%d\n", type);
++        kfree_skb(skb);
++        skb = NULL;
++        break;
++    }
++  exit:
++    if (ret) {
++        if (skb)
++            kfree_skb(skb);
++    }
++
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function enables the host interrupts mask
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @param mask          the interrupt mask
++ *  @return      UAP_STATUS_SUCCESS
++ */
++static int
++enable_host_int_mask(uap_private * priv, u8 mask)
++{
++    int ret = UAP_STATUS_SUCCESS;
++
++    ENTER();
++
++    /* Simply write the mask to the register */
++    ret = sbi_write_ioreg(priv, HOST_INT_MASK_REG, mask);
++
++    if (ret) {
++        PRINTM(WARN, "Unable to enable the host interrupt!\n");
++        ret = UAP_STATUS_FAILURE;
++    }
++
++    LEAVE();
++    return ret;
++}
++
++/**  @brief This function disables the host interrupts mask.
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @param mask          the interrupt mask
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++static int
++disable_host_int_mask(uap_private * priv, u8 mask)
++{
++    int ret = UAP_STATUS_SUCCESS;
++    u8 host_int_mask;
++
++    ENTER();
++
++    /* Read back the host_int_mask register */
++    ret = sbi_read_ioreg(priv, HOST_INT_MASK_REG, &host_int_mask);
++    if (ret) {
++        ret = UAP_STATUS_FAILURE;
++        goto done;
++    }
++
++    /* Update with the mask and write back to the register */
++    host_int_mask &= ~mask;
++    ret = sbi_write_ioreg(priv, HOST_INT_MASK_REG, host_int_mask);
++    if (ret < 0) {
++        PRINTM(WARN, "Unable to diable the host interrupt!\n");
++        ret = UAP_STATUS_FAILURE;
++        goto done;
++    }
++
++  done:
++    LEAVE();
++    return ret;
++}
++
++/********************************************************
++              Global Functions
++********************************************************/
++
++/**
++ *  @brief This function handles the interrupt.
++ *
++ *  @param func          A pointer to sdio_func structure.
++ *  @return      n/a
++ */
++static void
++sbi_interrupt(struct sdio_func *func)
++{
++    struct sdio_mmc_card *card;
++    uap_private *priv;
++    u8 ireg = 0;
++    int ret = UAP_STATUS_SUCCESS;
++
++    ENTER();
++
++    card = sdio_get_drvdata(func);
++    if (!card || !card->priv) {
++        PRINTM(MSG, "%s: sbi_interrupt(%p) card or priv is NULL, card=%p\n",
++               __FUNCTION__, func, card);
++        LEAVE();
++        return;
++    }
++    priv = card->priv;
++#ifdef FW_WAKEUP_TIME
++    if ((priv->adapter->wt_pwrup_sending != 0L) &&
++        (priv->adapter->wt_int == 0L))
++        priv->adapter->wt_int = get_utimeofday();
++#endif
++
++    ireg = sdio_readb(card->func, HOST_INTSTATUS_REG, &ret);
++    if (ret) {
++        PRINTM(WARN, "sdio_read_ioreg: read int status register failed\n");
++        goto done;
++    }
++    if (ireg != 0) {
++        /*
++         * DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS
++         * Clear the interrupt status register and re-enable the interrupt
++         */
++        PRINTM(INFO, "sdio_ireg = 0x%x\n", ireg);
++        sdio_writeb(card->func,
++                    ~(ireg) & (DN_LD_HOST_INT_STATUS | UP_LD_HOST_INT_STATUS),
++                    HOST_INTSTATUS_REG, &ret);
++        if (ret) {
++            PRINTM(WARN,
++                   "sdio_write_ioreg: clear int status register failed\n");
++            goto done;
++        }
++    }
++    OS_INT_DISABLE;
++    sd_ireg |= ireg;
++    OS_INT_RESTORE;
++
++    uap_interrupt(priv);
++  done:
++    LEAVE();
++}
++
++/**
++ *  @brief This function probe the card
++ *
++ *  @param func    A pointer to sdio_func structure
++ *  @param id    A pointer to structure sd_device_id
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++static int
++uap_probe(struct sdio_func *func, const struct sdio_device_id *id)
++{
++    int ret = UAP_STATUS_FAILURE;
++    struct sdio_mmc_card *card = NULL;
++
++    ENTER();
++
++    PRINTM(MSG, "%s: vendor=0x%4.04X device=0x%4.04X class=%d function=%d\n",
++           __FUNCTION__, func->vendor, func->device, func->class, func->num);
++
++    card = kzalloc(sizeof(struct sdio_mmc_card), GFP_KERNEL);
++    if (!card) {
++        ret = -ENOMEM;
++        goto done;
++    }
++
++    card->func = func;
++
++    if (!uap_add_card(card)) {
++        PRINTM(ERROR, "%s: uap_add_callback failed\n", __FUNCTION__);
++        kfree(card);
++        ret = UAP_STATUS_FAILURE;
++        goto done;
++    }
++
++    ret = UAP_STATUS_SUCCESS;
++
++  done:
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function removes the card
++ *
++ *  @param func    A pointer to sdio_func structure
++ *  @return        N/A
++ */
++static void
++uap_remove(struct sdio_func *func)
++{
++    struct sdio_mmc_card *card;
++
++    ENTER();
++
++    if (func) {
++        card = sdio_get_drvdata(func);
++        if (card) {
++            uap_remove_card(card);
++            kfree(card);
++        }
++    }
++
++    LEAVE();
++}
++
++#ifdef CONFIG_PM
++/**
++ *  @brief This function handles client driver suspend
++ *
++ *  @param func    A pointer to sdio_func structure
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++int
++uap_suspend(struct sdio_func *func)
++{
++    ENTER();
++    LEAVE();
++    return 0;
++}
++
++/**
++ *  @brief This function handles client driver resume
++ *
++ *  @param func    A pointer to sdio_func structure
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++int
++uap_resume(struct sdio_func *func)
++{
++    ENTER();
++    LEAVE();
++    return 0;
++}
++#endif
++
++/** Device ID for SD8688 */
++#define  SD_DEVICE_ID_8688_UAP 0x9104
++/** UAP IDs */
++static const struct sdio_device_id uap_ids[] = {
++    {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SD_DEVICE_ID_8688_UAP)},
++    {},
++};
++
++MODULE_DEVICE_TABLE(sdio, uap_ids);
++
++static struct sdio_driver uap_sdio = {
++    .name = "uap_sdio",
++    .id_table = uap_ids,
++    .probe = uap_probe,
++    .remove = uap_remove,
++#ifdef CONFIG_PM
++/*    .suspend        = uap_suspend, */
++/*    .resume = uap_resume, */
++#endif
++
++};
++
++/**
++ *  @brief This function registers the IF module in bus driver.
++ *
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++int __init
++sbi_register()
++{
++    int ret = UAP_STATUS_SUCCESS;
++
++    ENTER();
++
++    /* SDIO Driver Registration */
++    if (sdio_register_driver(&uap_sdio) != 0) {
++        PRINTM(FATAL, "SDIO Driver Registration Failed \n");
++        ret = UAP_STATUS_FAILURE;
++    }
++
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function de-registers the IF module in bus driver.
++ *
++ *  @return      n/a
++ */
++void __exit
++sbi_unregister(void)
++{
++    ENTER();
++
++    /* SDIO Driver Unregistration */
++    sdio_unregister_driver(&uap_sdio);
++
++    LEAVE();
++}
++
++/**
++ *  @brief This function checks the interrupt status and handle it accordingly.
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @param ireg    A pointer to variable that keeps returned value
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++int
++sbi_get_int_status(uap_private * priv, u8 * ireg)
++{
++    int ret = UAP_STATUS_SUCCESS;
++    u8 sdio_ireg = 0;
++    struct sdio_mmc_card *card = priv->uap_dev.card;
++
++    ENTER();
++
++    *ireg = 0;
++    OS_INT_DISABLE;
++    sdio_ireg = sd_ireg;
++    sd_ireg = 0;
++    OS_INT_RESTORE;
++
++    sdio_claim_host(card->func);
++
++    if (sdio_ireg & DN_LD_HOST_INT_STATUS) {    /* tx_done INT */
++        if (!priv->uap_dev.cmd_sent) {  /* tx_done already received */
++            PRINTM(INFO,
++                   "warning: tx_done already received: tx_dnld_rdy=0x%x int status=0x%x\n",
++                   priv->uap_dev.cmd_sent, sdio_ireg);
++        } else {
++            priv->uap_dev.cmd_sent = FALSE;
++            priv->uap_dev.data_sent = FALSE;
++            if ( (priv->uap_dev.netdev->reg_state == NETREG_REGISTERED) && (skb_queue_len(&priv->adapter->tx_queue) < TX_LOW_WATERMARK)) {
++                os_start_queue(priv);
++          }
++        }
++    }
++    if (sdio_ireg & UP_LD_HOST_INT_STATUS) {
++        sd_card_to_host(priv);
++    }
++
++    *ireg = sdio_ireg;
++    ret = UAP_STATUS_SUCCESS;
++    sdio_release_host(card->func);
++
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function disables the host interrupts.
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++int
++sbi_disable_host_int(uap_private * priv)
++{
++    struct sdio_mmc_card *card = priv->uap_dev.card;
++    int ret;
++
++    ENTER();
++
++    sdio_claim_host(card->func);
++    ret = disable_host_int_mask(priv, HIM_DISABLE);
++    sdio_release_host(card->func);
++
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function enables the host interrupts.
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @return      UAP_STATUS_SUCCESS
++ */
++int
++sbi_enable_host_int(uap_private * priv)
++{
++    struct sdio_mmc_card *card = priv->uap_dev.card;
++    int ret;
++
++    ENTER();
++
++    sdio_claim_host(card->func);
++    ret = enable_host_int_mask(priv, HIM_ENABLE);
++    sdio_release_host(card->func);
++
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function de-registers the device.
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @return      UAP_STATUS_SUCCESS
++ */
++int
++sbi_unregister_dev(uap_private * priv)
++{
++    struct sdio_mmc_card *card = priv->uap_dev.card;
++
++    ENTER();
++
++    if (!card || !card->func) {
++        PRINTM(ERROR, "Error: card or function is NULL!\n");
++        goto done;
++    }
++
++    sdio_claim_host(card->func);
++    sdio_release_irq(card->func);
++    sdio_disable_func(card->func);
++    sdio_release_host(card->func);
++
++    sdio_set_drvdata(card->func, NULL);
++
++  done:
++    LEAVE();
++    return UAP_STATUS_SUCCESS;
++}
++
++/**
++ *  @brief This function registers the device.
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++int
++sbi_register_dev(uap_private * priv)
++{
++    int ret = UAP_STATUS_FAILURE;
++    u8 reg;
++    struct sdio_mmc_card *card = priv->uap_dev.card;
++    struct sdio_func *func;
++
++    ENTER();
++
++    if (!card || !card->func) {
++        PRINTM(ERROR, "Error: card or function is NULL!\n");
++        goto done;
++    }
++
++    func = card->func;
++
++    /* Initialize the private structure */
++    priv->uap_dev.ioport = 0;
++
++    sdio_claim_host(func);
++
++    ret = sdio_enable_func(func);
++    if (ret) {
++        PRINTM(FATAL, "sdio_enable_func() failed: ret=%d\n", ret);
++        goto release_host;
++    }
++
++    ret = sdio_claim_irq(func, sbi_interrupt);
++    if (ret) {
++        PRINTM(FATAL, "sdio_claim_irq failed: ret=%d\n", ret);
++        goto disable_func;
++    }
++
++    /* Read the IO port */
++    ret = sbi_read_ioreg(priv, IO_PORT_0_REG, &reg);
++    if (ret)
++        goto release_irq;
++    else
++        priv->uap_dev.ioport |= reg;
++
++    ret = sbi_read_ioreg(priv, IO_PORT_1_REG, &reg);
++    if (ret)
++        goto release_irq;
++    else
++        priv->uap_dev.ioport |= (reg << 8);
++
++    ret = sbi_read_ioreg(priv, IO_PORT_2_REG, &reg);
++    if (ret)
++        goto release_irq;
++    else
++        priv->uap_dev.ioport |= (reg << 16);
++
++    PRINTM(INFO, "SDIO FUNC #%d IO port: 0x%x\n", func->num,
++           priv->uap_dev.ioport);
++
++    ret = sdio_set_block_size(card->func, SD_BLOCK_SIZE);
++    if (ret) {
++        PRINTM(ERROR, "%s: cannot set SDIO block size\n", __FUNCTION__);
++        ret = UAP_STATUS_FAILURE;
++        goto release_irq;
++    }
++    priv->hotplug_device = &func->dev;
++
++    if (helper_name == NULL) {
++        helper_name = DEFAULT_HELPER_NAME;
++    }
++    if (fw_name == NULL) {
++        fw_name = DEFAULT_FW_NAME;
++    }
++    sdio_release_host(func);
++
++    sdio_set_drvdata(func, card);
++
++    ret = UAP_STATUS_SUCCESS;
++    goto done;
++
++  release_irq:
++    sdio_release_irq(func);
++  disable_func:
++    sdio_disable_func(func);
++  release_host:
++    sdio_release_host(func);
++
++  done:
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function sends data to the card.
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @param payload A pointer to the data/cmd buffer
++ *  @param nb    the length of data/cmd
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++int
++sbi_host_to_card(uap_private * priv, u8 * payload, u16 nb)
++{
++    struct sdio_mmc_card *card = priv->uap_dev.card;
++    int ret = UAP_STATUS_SUCCESS;
++    int buf_block_len;
++    int blksz;
++    int i = 0;
++    u8 *buf = NULL;
++#ifdef PXA3XX_DMA_ALIGN
++    void *tmpbuf = NULL;
++    int tmpbufsz;
++#endif
++
++    ENTER();
++
++    if (!card || !card->func) {
++        PRINTM(ERROR, "card or function is NULL!\n");
++        LEAVE();
++        return UAP_STATUS_FAILURE;
++    }
++    buf = payload;
++#ifdef PXA3XX_DMA_ALIGN
++    if ((u32) payload & (PXA3XX_DMA_ALIGNMENT - 1)) {
++        tmpbufsz = ALIGN_SZ(nb, PXA3XX_DMA_ALIGNMENT);
++        tmpbuf = kmalloc(tmpbufsz, GFP_KERNEL);
++        memset(tmpbuf, 0, tmpbufsz);
++        /* Ensure 8-byte aligned CMD buffer */
++        buf = (u8 *) ALIGN_ADDR(tmpbuf, PXA3XX_DMA_ALIGNMENT);
++        memcpy(buf, payload, nb);
++    }
++#endif
++    /* Allocate buffer and copy payload */
++    blksz = SD_BLOCK_SIZE;
++    buf_block_len = (nb + blksz - 1) / blksz;
++    sdio_claim_host(card->func);
++#define MAX_WRITE_IOMEM_RETRY 2
++    priv->uap_dev.cmd_sent = TRUE;
++    priv->uap_dev.data_sent = TRUE;
++    do {
++        /* Transfer data to card */
++        ret = sdio_writesb(card->func, priv->uap_dev.ioport, buf,
++                           buf_block_len * blksz);
++        if (ret < 0) {
++            i++;
++            PRINTM(ERROR, "host_to_card, write iomem (%d) failed: %d\n", i,
++                   ret);
++            ret = UAP_STATUS_FAILURE;
++            if (i > MAX_WRITE_IOMEM_RETRY)
++                goto exit;
++        } else {
++            HEXDUMP("SDIO Blk Wr", payload, nb);
++        }
++    } while (ret == UAP_STATUS_FAILURE);
++  exit:
++    sdio_release_host(card->func);
++#ifdef PXA3XX_DMA_ALIGN
++    if (tmpbuf)
++        kfree(tmpbuf);
++#endif
++    if (ret == UAP_STATUS_FAILURE) {
++        priv->uap_dev.cmd_sent = FALSE;
++        priv->uap_dev.data_sent = FALSE;
++    }
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function reads CIS information.
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @param cisinfo A pointer to CIS information output buffer
++ *  @param cislen  A pointer to length of CIS info output buffer
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++#if 0
++static int
++sbi_get_cis_info(uap_private * priv, void *cisinfo, int *cislen)
++{
++#define CIS_PTR (0x8000)
++    struct sdio_mmc_card *card = priv->uap_dev.card;
++    unsigned int i, cis_ptr = CIS_PTR;
++    int ret = UAP_STATUS_FAILURE;
++
++    ENTER();
++
++    if (!card || !card->func) {
++        PRINTM(ERROR, "sbi_get_cis_info(): card or function is NULL!\n");
++        goto exit;
++    }
++#define MAX_SDIO_CIS_INFO_LEN (256)
++    if (!cisinfo || (*cislen < MAX_SDIO_CIS_INFO_LEN)) {
++        PRINTM(WARN, "ERROR! get_cis_info: insufficient buffer passed\n");
++        goto exit;
++    }
++
++    *cislen = MAX_SDIO_CIS_INFO_LEN;
++
++    sdio_claim_host(card->func);
++
++    PRINTM(INFO, "cis_ptr=%#x\n", cis_ptr);
++
++    /* Read the Tuple Data */
++    for (i = 0; i < *cislen; i++) {
++        ((unsigned char *) cisinfo)[i] =
++            sdio_readb(card->func, cis_ptr + i, &ret);
++        if (ret) {
++            PRINTM(WARN, "get_cis_info error: ret=%d\n", ret);
++            ret = UAP_STATUS_FAILURE;
++            goto done;
++        }
++        PRINTM(INFO, "cisinfo[%d]=%#x\n", i, ((unsigned char *) cisinfo)[i]);
++    }
++
++  done:
++    sdio_release_host(card->func);
++  exit:
++    LEAVE();
++    return ret;
++}
++#endif
++/**
++ *  @brief This function downloads helper image to the card.
++ *
++ *  @param priv       A pointer to uap_private structure
++ *  @return           UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++int
++sbi_prog_helper(uap_private * priv)
++{
++    struct sdio_mmc_card *card = priv->uap_dev.card;
++    u8 *helper = NULL;
++    int helperlen;
++    int ret = UAP_STATUS_SUCCESS;
++    void *tmphlprbuf = NULL;
++    int tmphlprbufsz;
++    u8 *hlprbuf;
++    int hlprblknow;
++    u32 tx_len;
++#ifdef FW_DOWNLOAD_SPEED
++    u32 tv1, tv2;
++#endif
++
++    ENTER();
++
++    if (!card || !card->func) {
++        PRINTM(ERROR, "sbi_prog_helper(): card or function is NULL!\n");
++        goto done;
++    }
++
++    if (priv->fw_helper) {
++        helper = (u8 *) priv->fw_helper->data;
++        helperlen = priv->fw_helper->size;
++    } else {
++        PRINTM(MSG, "No helper image found! Terminating download.\n");
++        LEAVE();
++        return UAP_STATUS_FAILURE;
++    }
++
++    PRINTM(INFO, "Downloading helper image (%d bytes), block size %d bytes\n",
++           helperlen, SD_BLOCK_SIZE);
++
++#ifdef FW_DOWNLOAD_SPEED
++    tv1 = get_utimeofday();
++#endif
++
++#ifdef PXA3XX_DMA_ALIGN
++    tmphlprbufsz = ALIGN_SZ(UAP_UPLD_SIZE, PXA3XX_DMA_ALIGNMENT);
++#else /* !PXA3XX_DMA_ALIGN */
++    tmphlprbufsz = UAP_UPLD_SIZE;
++#endif /* !PXA3XX_DMA_ALIGN */
++    tmphlprbuf = kmalloc(tmphlprbufsz, GFP_KERNEL);
++    if (!tmphlprbuf) {
++        PRINTM(ERROR,
++               "Unable to allocate buffer for helper. Terminating download\n");
++        ret = UAP_STATUS_FAILURE;
++        goto done;
++    }
++    memset(tmphlprbuf, 0, tmphlprbufsz);
++#ifdef PXA3XX_DMA_ALIGN
++    hlprbuf = (u8 *) ALIGN_ADDR(tmphlprbuf, PXA3XX_DMA_ALIGNMENT);
++#else /* !PXA3XX_DMA_ALIGN */
++    hlprbuf = (u8 *) tmphlprbuf;
++#endif /* !PXA3XX_DMA_ALIGN */
++
++    sdio_claim_host(card->func);
++
++    /* Perform helper data transfer */
++    tx_len = (FIRMWARE_TRANSFER_NBLOCK * SD_BLOCK_SIZE) - INTF_HEADER_LEN;
++    hlprblknow = 0;
++    do {
++        /* The host polls for the DN_LD_CARD_RDY and CARD_IO_READY bits */
++        ret = mv_sdio_poll_card_status(priv, CARD_IO_READY | DN_LD_CARD_RDY);
++        if (ret < 0) {
++            PRINTM(FATAL, "Helper download poll status timeout @ %d\n",
++                   hlprblknow);
++            goto done;
++        }
++
++        /* More data? */
++        if (hlprblknow >= helperlen)
++            break;
++
++        /* Set blocksize to transfer - checking for last block */
++        if (helperlen - hlprblknow < tx_len)
++            tx_len = helperlen - hlprblknow;
++
++        /* Set length to the 4-byte header */
++        *(u32 *) hlprbuf = uap_cpu_to_le32(tx_len);
++
++        /* Copy payload to buffer */
++        memcpy(&hlprbuf[INTF_HEADER_LEN], &helper[hlprblknow], tx_len);
++
++        PRINTM(INFO, ".");
++
++        /* Send data */
++        ret = sdio_writesb(card->func, priv->uap_dev.ioport,
++                           hlprbuf, FIRMWARE_TRANSFER_NBLOCK * SD_BLOCK_SIZE);
++
++        if (ret < 0) {
++            PRINTM(FATAL, "IO error during helper download @ %d\n", hlprblknow);
++            goto done;
++        }
++
++        hlprblknow += tx_len;
++    } while (TRUE);
++
++#ifdef FW_DOWNLOAD_SPEED
++    tv2 = get_utimeofday();
++    PRINTM(INFO, "helper: %ld.%03ld.%03ld ", tv1 / 1000000,
++           (tv1 % 1000000) / 1000, tv1 % 1000);
++    PRINTM(INFO, " -> %ld.%03ld.%03ld ", tv2 / 1000000, (tv2 % 1000000) / 1000,
++           tv2 % 1000);
++    tv2 -= tv1;
++    PRINTM(INFO, " == %ld.%03ld.%03ld\n", tv2 / 1000000, (tv2 % 1000000) / 1000,
++           tv2 % 1000);
++#endif
++
++    /* Write last EOF data */
++    PRINTM(INFO, "\nTransferring helper image EOF block\n");
++    memset(hlprbuf, 0x0, SD_BLOCK_SIZE);
++    ret = sdio_writesb(card->func, priv->uap_dev.ioport,
++                       hlprbuf, SD_BLOCK_SIZE);
++
++    if (ret < 0) {
++        PRINTM(FATAL, "IO error in writing helper image EOF block\n");
++        goto done;
++    }
++
++    ret = UAP_STATUS_SUCCESS;
++
++  done:
++    sdio_release_host(card->func);
++    if (tmphlprbuf)
++        kfree(tmphlprbuf);
++
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function downloads firmware image to the card.
++ *
++ *  @param priv       A pointer to uap_private structure
++ *  @return           UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++int
++sbi_prog_fw_w_helper(uap_private * priv)
++{
++    struct sdio_mmc_card *card = priv->uap_dev.card;
++    u8 *firmware = NULL;
++    int firmwarelen;
++    u8 base0;
++    u8 base1;
++    int ret = UAP_STATUS_SUCCESS;
++    int offset;
++    void *tmpfwbuf = NULL;
++    int tmpfwbufsz;
++    u8 *fwbuf;
++    u16 len;
++    int txlen = 0;
++    int tx_blocks = 0;
++    int i = 0;
++    int tries = 0;
++#ifdef FW_DOWNLOAD_SPEED
++    u32 tv1, tv2;
++#endif
++
++    ENTER();
++
++    if (!card || !card->func) {
++        PRINTM(ERROR, "sbi_prog_fw_w_helper(): card or function is NULL!\n");
++        goto done;
++    }
++
++    if (priv->firmware) {
++        firmware = (u8 *) priv->firmware->data;
++        firmwarelen = priv->firmware->size;
++    } else {
++        PRINTM(MSG, "No firmware image found! Terminating download.\n");
++        LEAVE();
++        return UAP_STATUS_FAILURE;
++    }
++
++    PRINTM(INFO, "Downloading FW image (%d bytes)\n", firmwarelen);
++
++#ifdef FW_DOWNLOAD_SPEED
++    tv1 = get_utimeofday();
++#endif
++
++#ifdef PXA3XX_DMA_ALIGN
++    tmpfwbufsz = ALIGN_SZ(UAP_UPLD_SIZE, PXA3XX_DMA_ALIGNMENT);
++#else /* PXA3XX_DMA_ALIGN */
++    tmpfwbufsz = UAP_UPLD_SIZE;
++#endif /* PXA3XX_DMA_ALIGN */
++    tmpfwbuf = kmalloc(tmpfwbufsz, GFP_KERNEL);
++    if (!tmpfwbuf) {
++        PRINTM(ERROR,
++               "Unable to allocate buffer for firmware. Terminating download.\n");
++        ret = UAP_STATUS_FAILURE;
++        goto done;
++    }
++    memset(tmpfwbuf, 0, tmpfwbufsz);
++#ifdef PXA3XX_DMA_ALIGN
++    /* Ensure 8-byte aligned firmware buffer */
++    fwbuf = (u8 *) ALIGN_ADDR(tmpfwbuf, PXA3XX_DMA_ALIGNMENT);
++#else /* PXA3XX_DMA_ALIGN */
++    fwbuf = (u8 *) tmpfwbuf;
++#endif /* PXA3XX_DMA_ALIGN */
++
++    sdio_claim_host(card->func);
++
++    /* Perform firmware data transfer */
++    offset = 0;
++    do {
++        /* The host polls for the DN_LD_CARD_RDY and CARD_IO_READY bits */
++        ret = mv_sdio_poll_card_status(priv, CARD_IO_READY | DN_LD_CARD_RDY);
++        if (ret < 0) {
++            PRINTM(FATAL, "FW download with helper poll status timeout @ %d\n",
++                   offset);
++            goto done;
++        }
++
++        /* More data? */
++        if (offset >= firmwarelen)
++            break;
++
++        for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
++            if ((ret = sbi_read_ioreg(priv, HOST_F1_RD_BASE_0, &base0)) < 0) {
++                PRINTM(WARN, "Dev BASE0 register read failed:"
++                       " base0=0x%04X(%d). Terminating download.\n", base0,
++                       base0);
++                ret = UAP_STATUS_FAILURE;
++                goto done;
++            }
++            if ((ret = sbi_read_ioreg(priv, HOST_F1_RD_BASE_1, &base1)) < 0) {
++                PRINTM(WARN, "Dev BASE1 register read failed:"
++                       " base1=0x%04X(%d). Terminating download.\n", base1,
++                       base1);
++                ret = UAP_STATUS_FAILURE;
++                goto done;
++            }
++            len = (((u16) base1) << 8) | base0;
++
++            /* For SD8688 wait until the length is not 0, 1 or 2 before
++               downloading the first FW block, since BOOT code writes the
++               register to indicate the helper/FW download winner, the value
++               could be 1 or 2 (Func1 or Func2). */
++            if ((len && offset) || (len > 2))
++                break;
++            udelay(10);
++        }
++
++        if (len == 0)
++            break;
++        else if (len > UAP_UPLD_SIZE) {
++            PRINTM(FATAL, "FW download failure @ %d, invalid length %d\n",
++                   offset, len);
++            ret = UAP_STATUS_FAILURE;
++            goto done;
++        }
++
++        txlen = len;
++
++        if (len & BIT(0)) {
++            i++;
++            if (i > MAX_WRITE_IOMEM_RETRY) {
++                PRINTM(FATAL,
++                       "FW download failure @ %d, over max retry count\n",
++                       offset);
++                ret = UAP_STATUS_FAILURE;
++                goto done;
++            }
++            PRINTM(ERROR, "FW CRC error indicated by the helper:"
++                   " len = 0x%04X, txlen = %d\n", len, txlen);
++            len &= ~BIT(0);
++            /* Setting this to 0 to resend from same offset */
++            txlen = 0;
++        } else {
++            i = 0;
++
++            /* Set blocksize to transfer - checking for last block */
++            if (firmwarelen - offset < txlen) {
++                txlen = firmwarelen - offset;
++            }
++            PRINTM(INFO, ".");
++
++            tx_blocks = (txlen + SD_BLOCK_SIZE - 1) / SD_BLOCK_SIZE;
++
++            /* Copy payload to buffer */
++            memcpy(fwbuf, &firmware[offset], txlen);
++        }
++
++        /* Send data */
++        ret = sdio_writesb(card->func, priv->uap_dev.ioport,
++                           fwbuf, tx_blocks * SD_BLOCK_SIZE);
++
++        if (ret < 0) {
++            PRINTM(ERROR, "FW download, write iomem (%d) failed @ %d\n", i,
++                   offset);
++            if (sbi_write_ioreg(priv, CONFIGURATION_REG, 0x04) < 0) {
++                PRINTM(ERROR, "write ioreg failed (CFG)\n");
++            }
++        }
++
++        offset += txlen;
++    } while (TRUE);
++
++    PRINTM(INFO, "\nFW download over, size %d bytes\n", offset);
++
++    ret = UAP_STATUS_SUCCESS;
++  done:
++#ifdef FW_DOWNLOAD_SPEED
++    tv2 = get_utimeofday();
++    PRINTM(INFO, "FW: %ld.%03ld.%03ld ", tv1 / 1000000,
++           (tv1 % 1000000) / 1000, tv1 % 1000);
++    PRINTM(INFO, " -> %ld.%03ld.%03ld ", tv2 / 1000000,
++           (tv2 % 1000000) / 1000, tv2 % 1000);
++    tv2 -= tv1;
++    PRINTM(INFO, " == %ld.%03ld.%03ld\n", tv2 / 1000000,
++           (tv2 % 1000000) / 1000, tv2 % 1000);
++#endif
++    sdio_release_host(card->func);
++    if (tmpfwbuf)
++        kfree(tmpfwbuf);
++
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function checks if the firmware is ready to accept
++ *  command or not.
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @param pollnum Poll number
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++int
++sbi_check_fw_status(uap_private * priv, int pollnum)
++{
++    struct sdio_mmc_card *card = priv->uap_dev.card;
++    int ret = UAP_STATUS_SUCCESS;
++    u16 firmwarestat;
++    int tries;
++
++    ENTER();
++
++    sdio_claim_host(card->func);
++
++    /* Wait for firmware initialization event */
++    for (tries = 0; tries < pollnum; tries++) {
++        if ((ret = sd_read_firmware_status(priv, &firmwarestat)) < 0)
++            continue;
++        if (firmwarestat == FIRMWARE_READY) {
++            ret = UAP_STATUS_SUCCESS;
++            break;
++        } else {
++            mdelay(10);
++            ret = UAP_STATUS_FAILURE;
++        }
++    }
++
++    if (ret < 0)
++        goto done;
++
++    ret = UAP_STATUS_SUCCESS;
++    sd_get_rx_unit(priv);
++
++  done:
++    sdio_release_host(card->func);
++
++    LEAVE();
++    return ret;
++}
++
++/**
++ *  @brief This function set bus clock on/off
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @param option    TRUE--on , FALSE--off
++ *  @return      UAP_STATUS_SUCCESS
++ */
++#if 0
++static int
++sbi_set_bus_clock(uap_private * priv, u8 option)
++{
++    ENTER();
++    LEAVE();
++    return UAP_STATUS_SUCCESS;
++}
++#endif
++
++/**
++ *  @brief This function wakeup firmware
++ *
++ *  @param priv    A pointer to uap_private structure
++ *  @return      UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE
++ */
++int
++sbi_wakeup_firmware(uap_private * priv)
++{
++    struct sdio_mmc_card *card = priv->uap_dev.card;
++    int ret = UAP_STATUS_SUCCESS;
++
++    ENTER();
++
++    if (!card || !card->func) {
++        PRINTM(ERROR, "card or function is NULL!\n");
++        LEAVE();
++        return UAP_STATUS_FAILURE;
++    }
++    sdio_claim_host(card->func);
++    sdio_writeb(card->func, HOST_POWER_UP, CONFIGURATION_REG, &ret);
++    sdio_release_host(card->func);
++    LEAVE();
++    return ret;
++}
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/libertas_uap/uap_sdio_mmc.h backports-3.18.1-1/drivers/net/wireless/libertas_uap/uap_sdio_mmc.h
+--- backports-3.18.1-1.org/drivers/net/wireless/libertas_uap/uap_sdio_mmc.h    1970-01-01 01:00:00.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/libertas_uap/uap_sdio_mmc.h        2014-12-29 20:37:43.955764567 +0100
+@@ -0,0 +1,136 @@
++/** @file uap_sdio_mmc.h
++ *  @brief This file contains SDIO IF (interface) module
++ *  related macros, enum, and structure.
++ *
++ * Copyright (C) 2007-2009, Marvell International Ltd.
++ *
++ * This software file (the "File") is distributed by Marvell International
++ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
++ * (the "License").  You may use, redistribute and/or modify this File in
++ * accordance with the terms and conditions of the License, a copy of which
++ * is available along with the File in the gpl.txt file or by writing to
++ * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++ * 02111-1307 or on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
++ *
++ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
++ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
++ * this warranty disclaimer.
++ *
++ */
++/****************************************************
++Change log:
++      10/10/07: initial version
++****************************************************/
++
++#ifndef       _UAP_SDIO_MMC_H
++#define       _UAP_SDIO_MMC_H
++
++#include      <linux/mmc/sdio.h>
++#include      <linux/mmc/sdio_ids.h>
++#include      <linux/mmc/sdio_func.h>
++#include      <linux/mmc/card.h>
++
++#include      "uap_headers.h"
++
++/** The number of times to try when waiting for downloaded firmware to
++     become active. (polling the scratch register). */
++#define MAX_FIRMWARE_POLL_TRIES               100
++
++/** Firmware ready */
++#define FIRMWARE_READY                        0xfedc
++
++/** Number of firmware blocks to transfer */
++#define FIRMWARE_TRANSFER_NBLOCK      2
++
++/* Host Control Registers */
++/** Host Control Registers : I/O port 0 */
++#define IO_PORT_0_REG                 0x00
++/** Host Control Registers : I/O port 1 */
++#define IO_PORT_1_REG                 0x01
++/** Host Control Registers : I/O port 2 */
++#define IO_PORT_2_REG                 0x02
++
++/** Host Control Registers : Configuration */
++#define CONFIGURATION_REG             0x03
++/** Host Control Registers : Host without Command 53 finish host */
++#define HOST_WO_CMD53_FINISH_HOST     (0x1U << 2)
++/** Host Control Registers : Host power up */
++#define HOST_POWER_UP                 (0x1U << 1)
++/** Host Control Registers : Host power down */
++#define HOST_POWER_DOWN                       (0x1U << 0)
++
++/** Host Control Registers : Host interrupt mask */
++#define HOST_INT_MASK_REG             0x04
++/** Host Control Registers : Upload host interrupt mask */
++#define UP_LD_HOST_INT_MASK           (0x1U)
++/** Host Control Registers : Download host interrupt mask */
++#define DN_LD_HOST_INT_MASK           (0x2U)
++/** Enable Host interrupt mask */
++#define HIM_ENABLE                    (UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK)
++/** Disable Host interrupt mask */
++#define       HIM_DISABLE                     0xff
++
++/** Host Control Registers : Host interrupt status */
++#define HOST_INTSTATUS_REG            0x05
++/** Host Control Registers : Upload host interrupt status */
++#define UP_LD_HOST_INT_STATUS         (0x1U)
++/** Host Control Registers : Download host interrupt status */
++#define DN_LD_HOST_INT_STATUS         (0x2U)
++
++/** Host F1 read base 0 */
++#define HOST_F1_RD_BASE_0             0x10
++/** Host F1 read base 1 */
++#define HOST_F1_RD_BASE_1             0x11
++
++/** Card Control Registers : Card status register */
++#define CARD_STATUS_REG               0x20
++/** Card Control Registers : Card I/O ready */
++#define CARD_IO_READY                 (0x1U << 3)
++/** Card Control Registers : CIS card ready */
++#define CIS_CARD_RDY                  (0x1U << 2)
++/** Card Control Registers : Upload card ready */
++#define UP_LD_CARD_RDY                (0x1U << 1)
++/** Card Control Registers : Download card ready */
++#define DN_LD_CARD_RDY                (0x1U << 0)
++
++/** Card Control Registers : Card OCR 0 register */
++#define CARD_OCR_0_REG                0x34
++/** Card Control Registers : Card OCR 1 register */
++#define CARD_OCR_1_REG                0x35
++
++/** Firmware status 0 register */
++#define CARD_FW_STATUS0_REG           0x40
++/** Firmware status 1 register */
++#define CARD_FW_STATUS1_REG           0x41
++/** Rx length register */
++#define CARD_RX_LEN_REG                       0x42
++/** Rx unit register */
++#define CARD_RX_UNIT_REG              0x43
++
++/** Chip Id Register 0 */
++#define CARD_CHIP_ID_0_REG            0x801c
++/** Chip Id Register 1 */
++#define CARD_CHIP_ID_1_REG            0x801d
++
++#ifdef PXA3XX_DMA_ALIGN
++/** DMA alignment value for PXA3XX platforms */
++#define PXA3XX_DMA_ALIGNMENT    8
++/** Macros for Data Alignment : size */
++#define ALIGN_SZ(p, a)  \
++    (((p) + ((a) - 1)) & ~((a) - 1))
++
++/** Macros for Data Alignment : address */
++#define ALIGN_ADDR(p, a)    \
++    ((((u32)(p)) + (((u32)(a)) - 1)) & ~(((u32)(a)) - 1))
++#endif /* PXA3XX_DMA_ALIGN */
++
++struct sdio_mmc_card
++{
++        /** sdio_func structure pointer */
++    struct sdio_func *func;
++        /** uap_private structure pointer */
++    uap_private *priv;
++};
++
++#endif /* _UAP_SDIO_MMC_H */
+diff -Naur backports-3.18.1-1.org/drivers/net/wireless/Makefile backports-3.18.1-1/drivers/net/wireless/Makefile
+--- backports-3.18.1-1.org/drivers/net/wireless/Makefile       2014-12-21 22:37:15.000000000 +0100
++++ backports-3.18.1-1/drivers/net/wireless/Makefile   2014-12-29 20:40:33.632440784 +0100
+@@ -60,3 +60,5 @@
+ 
+ obj-$(CPTCFG_CW1200)  += cw1200/
+ obj-$(CPTCFG_RSI_91X) += rsi/
++
++obj-$(CPTCFG_LIBERTAS_UAP)    += libertas_uap/

diff --git a/src/patches/fireinfo/0001-bogomips-Don-t-crash-when-no-bogomips-are-available.patch b/src/patches/fireinfo/0001-bogomips-Don-t-crash-when-no-bogomips-are-available.patch
index f228d527a13bdd5c14990bf6c0a45cc5f2f4c00b..c1f8a77d866b52ed3f3183b5472e480d22cdfd27 100644 (file)
--- a/src/patches/fireinfo/0001-bogomips-Don-t-crash-when-no-bogomips-are-available.patch
+++ b/src/patches/fireinfo/0001-bogomips-Don-t-crash-when-no-bogomips-are-available.patch
@@ -1,7 +1,7 @@
 From a9401d9542fae575d9ce2bb534cd4e598e9c7b8e Mon Sep 17 00:00:00 2001
 From: Michael Tremer <michael.tremer@ipfire.org>
 Date: Tue, 28 Oct 2014 21:14:41 +0100
-Subject: [PATCH 1/2] bogomips: Don't crash when no bogomips are available
+Subject: [PATCH 1/3] bogomips: Don't crash when no bogomips are available
 
 The RPi doesn't provide bogomips in /proc/cpuinfo any more
 and fireinfo crashed when trying to read that file

diff --git a/src/patches/fireinfo/0002-ARM-Read-board-model-from-device-tree-in-proc.patch b/src/patches/fireinfo/0002-ARM-Read-board-model-from-device-tree-in-proc.patch
index de654001900a10908090c53962ba94f0719ccbe4..5ea1e44cf72a29557e803fb6d361498608c2bf66 100644 (file)
--- a/src/patches/fireinfo/0002-ARM-Read-board-model-from-device-tree-in-proc.patch
+++ b/src/patches/fireinfo/0002-ARM-Read-board-model-from-device-tree-in-proc.patch
@@ -1,7 +1,7 @@
 From b9a068e26261007d4a0592fcb47f82658af2c775 Mon Sep 17 00:00:00 2001
 From: Michael Tremer <michael.tremer@ipfire.org>
 Date: Mon, 3 Nov 2014 21:33:45 +0100
-Subject: [PATCH 2/2] ARM: Read board model from device-tree in /proc
+Subject: [PATCH 2/3] ARM: Read board model from device-tree in /proc
 
 ---
  src/fireinfo/system.py | 35 +++++++++--------------------------

diff --git a/src/patches/fireinfo/0003-Revert-vendor-model-for-ARM-to-old-behaviour.patch b/src/patches/fireinfo/0003-Revert-vendor-model-for-ARM-to-old-behaviour.patch
new file mode 100644 (file)
index 0000000..66fbfe1
--- /dev/null
+++ b/src/patches/fireinfo/0003-Revert-vendor-model-for-ARM-to-old-behaviour.patch
@@ -0,0 +1,70 @@
+From 810fe43289f5b003cbf80ebb1d9a79f52a767cdb Mon Sep 17 00:00:00 2001
+From: Michael Tremer <michael.tremer@ipfire.org>
+Date: Mon, 15 Dec 2014 22:48:26 +0100
+Subject: [PATCH 3/3] Revert vendor/model for ARM to old behaviour
+
+---
+ src/fireinfo/system.py | 33 +++++++++++++++++++++++++++++----
+ 1 file changed, 29 insertions(+), 4 deletions(-)
+
+diff --git a/src/fireinfo/system.py b/src/fireinfo/system.py
+index 195832e9f7eb..ce33837af747 100644
+--- a/src/fireinfo/system.py
++++ b/src/fireinfo/system.py
+@@ -304,6 +304,27 @@ class System(object):
+               """
+               return read_from_file("/sys/class/dmi/id/bios_vendor")
+ 
++      def vendor_model_tuple(self):
++              try:
++                      s = self.__cpuinfo["Hardware"]
++              except KeyError:
++                      return (None, None)
++
++              if s.startswith("ARM-Versatile"):
++                      return ("ARM", s)
++
++              try:
++                      v, m = s.split(" ", 1)
++              except ValueError:
++                      if s.startswith("BCM"):
++                              v = "Broadcom"
++                              m = s
++                      else:
++                              v = None
++                              m = s
++
++              return v, m
++
+       @property
+       def vendor(self):
+               """
+@@ -316,10 +337,10 @@ class System(object):
+                               break
+ 
+               if ret is None:
+-                      try:
+-                              return self.__cpuinfo["Hardware"]
+-                      except KeyError:
+-                              pass
++                      if os.path.exists("/proc/device-tree"):
++                              ret = self.__cpuinfo.get("Hardware", None)
++                      else:
++                              ret, m = self.vendor_model_tuple()
+ 
+               return ret
+ 
+@@ -340,6 +361,10 @@ class System(object):
+                       # replace the NULL byte with which the DT string ends
+                       ret = ret.replace(u"\u0000", "")
+ 
++              # Fall back to read /proc/cpuinfo
++              if not ret:
++                      v, ret = self.vendor_model_tuple()
++
+               return ret
+ 
+       @property
+-- 
+1.9.3
+

diff --git a/src/patches/glibc/glibc-rh1019916.patch b/src/patches/glibc/glibc-rh1019916.patch
new file mode 100644 (file)
index 0000000..f67af90
--- /dev/null
+++ b/src/patches/glibc/glibc-rh1019916.patch
@@ -0,0 +1,39 @@
+commit 48b67d71ec677d1b3168e52a68b644784cead604
+Author: Andreas Schwab <schwab@redhat.com>
+Date:   Wed Sep 14 12:12:25 2011 +0200
+
+    Also relocate in dependency order when doing symbol dependency testing
+
+diff --git a/elf/rtld.c b/elf/rtld.c
+index 764140d..324d979 100644
+--- a/elf/rtld.c
++++ b/elf/rtld.c
+@@ -2027,24 +2027,21 @@ ERROR: ld.so: object '%s' cannot be loaded as audit interface: %s; ignored.\n",
+           {
+             /* We have to do symbol dependency testing.  */
+             struct relocate_args args;
+-            struct link_map *l;
++            unsigned int i;
+ 
+             args.reloc_mode = GLRO(dl_lazy) ? RTLD_LAZY : 0;
+ 
+-            l = main_map;
+-            while (l->l_next != NULL)
+-              l = l->l_next;
+-            do
++            i = main_map->l_searchlist.r_nlist;
++            while (i-- > 0)
+               {
++                struct link_map *l = main_map->l_initfini[i];
+                 if (l != &GL(dl_rtld_map) && ! l->l_faked)
+                   {
+                     args.l = l;
+                     _dl_receive_error (print_unresolved, relocate_doit,
+                                        &args);
+                   }
+-                l = l->l_prev;
+               }
+-            while (l != NULL);
+ 
+             if ((GLRO(dl_debug_mask) & DL_DEBUG_PRELINK)
+                 && rtld_multiple_ref)

diff --git a/src/patches/glibc/glibc-rh1091162.patch b/src/patches/glibc/glibc-rh1027101.patch
similarity index 100%
rename from src/patches/glibc/glibc-rh1091162.patch
rename to src/patches/glibc/glibc-rh1027101.patch

diff --git a/src/patches/glibc/glibc-rh1027261.patch b/src/patches/glibc/glibc-rh1027261.patch
new file mode 100644 (file)
index 0000000..8599cf0
--- /dev/null
+++ b/src/patches/glibc/glibc-rh1027261.patch
@@ -0,0 +1,28 @@
+commit 4d653a59ffeae0f46f76a40230e2cfa9587b7e7e
+Author: Siddhesh Poyarekar <siddhesh@redhat.com>
+Date:   Fri May 30 22:43:52 2014 +0530
+
+    Add mmap usage in malloc_info output
+    
+    The current malloc_info xml output only has information about
+    allocations on the heap.  Display information about number of mappings
+    and total mmapped size to this to complete the picture.
+
+diff -pruN a/malloc/malloc.c b/malloc/malloc.c
+--- a/malloc/malloc.c  2014-06-02 07:35:22.573256155 +0530
++++ b/malloc/malloc.c  2014-06-02 07:34:58.856257177 +0530
+@@ -6553,12 +6553,14 @@ malloc_info (int options, FILE *fp)
+   fprintf (fp,
+          "<total type=\"fast\" count=\"%zu\" size=\"%zu\"/>\n"
+          "<total type=\"rest\" count=\"%zu\" size=\"%zu\"/>\n"
++         "<total type=\"mmap\" count=\"%d\" size=\"%zu\"/>\n"
+          "<system type=\"current\" size=\"%zu\"/>\n"
+          "<system type=\"max\" size=\"%zu\"/>\n"
+          "<aspace type=\"total\" size=\"%zu\"/>\n"
+          "<aspace type=\"mprotect\" size=\"%zu\"/>\n"
+          "</malloc>\n",
+          total_nfastblocks, total_fastavail, total_nblocks, total_avail,
++         mp_.n_mmaps, mp_.mmapped_mem,
+          total_system, total_max_system,
+          total_aspace, total_aspace_mprotect);
+ 

diff --git a/src/patches/glibc/glibc-rh1032628.patch b/src/patches/glibc/glibc-rh1032628.patch
new file mode 100644 (file)
index 0000000..6140c19
--- /dev/null
+++ b/src/patches/glibc/glibc-rh1032628.patch
@@ -0,0 +1,166 @@
+commit 028478fa40d85a73b19638dbe3f83b1acebf370c
+Author: Ulrich Drepper <drepper@gmail.com>
+Date:   Thu Mar 10 12:51:33 2011 -0500
+
+    Fix copy relocations handling of unique objects.
+
+ 2011-03-06  Ulrich Drepper  <drepper@gmail.com>
+
+and a part of:
+
+commit 33f85a3fb9fe432e0ebf6a3481bc2d5e29cb605f
+Author: Ulrich Drepper <drepper@gmail.com>
+Date:   Thu Mar 10 03:18:21 2011 -0500
+
+    Don't run tests checking xecutable stack when SELinux is enforcing.
+
+since the latter incorrectly had a bit of the former changes.
+
+Additionally, the test case needs -lstdc++ to build.
+
+diff --git a/elf/Makefile b/elf/Makefile
+index c427679..56cb1b1 100644
+--- a/elf/Makefile
++++ b/elf/Makefile
+@@ -201,7 +201,7 @@ tests += loadtest restest1 preloadtest loadfail multiload origtest resolvfail \
+        unload3 unload4 unload5 unload6 unload7 unload8 tst-global1 order2 \
+        tst-audit1 tst-audit2 tst-audit9 \
+        tst-stackguard1 tst-addr1 tst-thrlock \
+-       tst-unique1 tst-unique2
++       tst-unique1 tst-unique2 tst-unique3
+ #      reldep9
+ test-srcs = tst-pathopt
+ tests-execstack-yes = tst-execstack tst-execstack-needed tst-execstack-prog
+@@ -255,6 +255,7 @@ modules-names = testobj1 testobj2 testobj3 testobj4 testobj5 testobj6 \
+               order2mod1 order2mod2 order2mod3 order2mod4 \
+               tst-unique1mod1 tst-unique1mod2 \
+               tst-unique2mod1 tst-unique2mod2 \
++              tst-unique3lib tst-unique3lib2 \
+               tst-auditmod9a tst-auditmod9b
+ ifeq (yes,$(have-initfini-array))
+ modules-names += tst-array2dep tst-array5dep
+@@ -1178,6 +1179,11 @@ $(objpfx)tst-unique1.out: $(objpfx)tst-unique1mod1.so \
+ $(objpfx)tst-unique2: $(libdl) $(objpfx)tst-unique2mod1.so
+ $(objpfx)tst-unique2.out: $(objpfx)tst-unique2mod2.so
+ 
++LDLIBS-tst-unique3lib.so = -lstdc++
++LDLIBS-tst-unique3lib2.so = -lstdc++
++$(objpfx)tst-unique3: $(libdl) $(objpfx)tst-unique3lib.so
++$(objpfx)tst-unique3.out: $(objpfx)tst-unique3lib2.so
++
+ ifeq (yes,$(config-cflags-avx))
+ CFLAGS-tst-audit4.c += -mavx
+ CFLAGS-tst-auditmod4a.c += -mavx
+diff --git a/elf/dl-lookup.c b/elf/dl-lookup.c
+index 78c8669..874a4bb 100644
+--- a/elf/dl-lookup.c
++++ b/elf/dl-lookup.c
+@@ -364,8 +363,19 @@ do_lookup_x (const char *undef_name, uint_fast32_t new_hash,
+                     if (entries[idx].hashval == new_hash
+                         && strcmp (entries[idx].name, undef_name) == 0)
+                       {
+-                        result->s = entries[idx].sym;
+-                        result->m = (struct link_map *) entries[idx].map;
++                        if ((type_class & ELF_RTYPE_CLASS_COPY) != 0)
++                          {
++                            /* We possibly have to initialize the central
++                               copy from the copy addressed through the
++                               relocation.  */
++                            result->s = sym;
++                            result->m = (struct link_map *) map;
++                          }
++                        else
++                          {
++                            result->s = entries[idx].sym;
++                            result->m = (struct link_map *) entries[idx].map;
++                          }
+                         __rtld_lock_unlock_recursive (tab->lock);
+                         return 1;
+                       }
+diff --git a/elf/tst-unique3.cc b/elf/tst-unique3.cc
+new file mode 100644
+index 0000000..b2c9593
+--- /dev/null
++++ b/elf/tst-unique3.cc
+@@ -0,0 +1,23 @@
++#include "tst-unique3.h"
++#include <cstdio>
++#include "../dlfcn/dlfcn.h"
++
++int t = S<char>::i;
++
++int
++main (void)
++{
++  std::printf ("%d %d\n", S<char>::i, t);
++  int result = S<char>::i++ != 1 || t != 1;
++  result |= in_lib ();
++  void *d = dlopen ("$ORIGIN/tst-unique3lib2.so", RTLD_LAZY);
++  int (*fp) ();
++  if (d == NULL || (fp = (int(*)()) dlsym (d, "in_lib2")) == NULL)
++    {
++      std::printf ("failed to get symbol in_lib2\n");
++      return 1;
++    }
++  result |= fp ();
++  dlclose (d);
++  return result;
++}
+diff --git a/elf/tst-unique3.h b/elf/tst-unique3.h
+new file mode 100644
+index 0000000..716d236
+--- /dev/null
++++ b/elf/tst-unique3.h
+@@ -0,0 +1,8 @@
++// BZ 12510
++template<typename T>
++struct S
++{
++  static int i;
++};
++
++extern int in_lib (void);
+diff --git a/elf/tst-unique3lib.cc b/elf/tst-unique3lib.cc
+new file mode 100644
+index 0000000..fa8e85a
+--- /dev/null
++++ b/elf/tst-unique3lib.cc
+@@ -0,0 +1,11 @@
++#include <cstdio>
++#include "tst-unique3.h"
++template<typename T> int S<T>::i = 1;
++static int i = S<char>::i;
++
++int
++in_lib (void)
++{
++  std::printf ("in_lib: %d %d\n", S<char>::i, i);
++  return S<char>::i++ != 2 || i != 1;
++}
+diff --git a/elf/tst-unique3lib2.cc b/elf/tst-unique3lib2.cc
+new file mode 100644
+index 0000000..17d817e
+--- /dev/null
++++ b/elf/tst-unique3lib2.cc
+@@ -0,0 +1,12 @@
++#include <cstdio>
++#include "tst-unique3.h"
++
++template<typename T> int S<T>::i;
++
++extern "C"
++int
++in_lib2 ()
++{
++  std::printf ("in_lib2: %d\n", S<char>::i);
++  return S<char>::i != 3;
++}
+diff --git a/include/bits/dlfcn.h b/include/bits/dlfcn.h
+index cb4a5c2..c31a645 100644
+--- a/include/bits/dlfcn.h
++++ b/include/bits/dlfcn.h
+@@ -1,4 +1,3 @@
+ #include_next <bits/dlfcn.h>
+ 
+-extern void _dl_mcount_wrapper_check (void *__selfpc);
+ libc_hidden_proto (_dl_mcount_wrapper_check)

diff --git a/src/patches/glibc/glibc-rh1098050.patch b/src/patches/glibc/glibc-rh1044628.patch
similarity index 100%
rename from src/patches/glibc/glibc-rh1098050.patch
rename to src/patches/glibc/glibc-rh1044628.patch

diff --git a/src/patches/glibc/glibc-rh1111460.patch b/src/patches/glibc/glibc-rh1111460.patch
new file mode 100644 (file)
index 0000000..1a4315d
--- /dev/null
+++ b/src/patches/glibc/glibc-rh1111460.patch
@@ -0,0 +1,341 @@
+commit 7cbcdb3699584db8913ca90f705d6337633ee10f
+Author: Siddhesh Poyarekar <siddhesh@redhat.com>
+Date:   Fri Oct 25 10:22:12 2013 +0530
+
+    Fix stack overflow due to large AF_INET6 requests
+    
+    Resolves #16072 (CVE-2013-4458).
+    
+    This patch fixes another stack overflow in getaddrinfo when it is
+    called with AF_INET6.  The AF_UNSPEC case was fixed as CVE-2013-1914,
+    but the AF_INET6 case went undetected back then.
+
+commit 91ce40854d0b7f865cf5024ef95a8026b76096f3
+Author: Florian Weimer <fweimer@redhat.com>
+Date:   Fri Aug 16 09:38:52 2013 +0200
+
+    CVE-2013-4237, BZ #14699: Buffer overflow in readdir_r
+    
+       * sysdeps/posix/dirstream.h (struct __dirstream): Add errcode
+       member.
+       * sysdeps/posix/opendir.c (__alloc_dir): Initialize errcode
+       member.
+       * sysdeps/posix/rewinddir.c (rewinddir): Reset errcode member.
+       * sysdeps/posix/readdir_r.c (__READDIR_R): Enforce NAME_MAX limit.
+       Return delayed error code.  Remove GETDENTS_64BIT_ALIGNED
+       conditional.
+       * sysdeps/unix/sysv/linux/wordsize-64/readdir_r.c: Do not define
+       GETDENTS_64BIT_ALIGNED.
+       * sysdeps/unix/sysv/linux/i386/readdir64_r.c: Likewise.
+       * manual/filesys.texi (Reading/Closing Directory): Document
+       ENAMETOOLONG return value of readdir_r.  Recommend readdir more
+       strongly.
+       * manual/conf.texi (Limits for Files): Add portability note to
+       NAME_MAX, PATH_MAX.
+       (Pathconf): Add portability note for _PC_NAME_MAX, _PC_PATH_MAX.
+
+diff --git a/sysdeps/posix/getaddrinfo.c b/sysdeps/posix/getaddrinfo.c
+index e6ce4cf..8ff74b4 100644
+--- a/sysdeps/posix/getaddrinfo.c
++++ b/sysdeps/posix/getaddrinfo.c
+@@ -197,7 +197,22 @@ gaih_inet_serv (const char *servicename, const struct gaih_typeproto *tp,
+                               &rc, &herrno, NULL, &localcanon));            \
+     if (rc != ERANGE || herrno != NETDB_INTERNAL)                           \
+       break;                                                                \
+-    tmpbuf = extend_alloca (tmpbuf, tmpbuflen, 2 * tmpbuflen);                      \
++    if (!malloc_tmpbuf && __libc_use_alloca (alloca_used + 2 * tmpbuflen))    \
++      tmpbuf = extend_alloca_account (tmpbuf, tmpbuflen, 2 * tmpbuflen,             \
++                                    alloca_used);                           \
++    else                                                                    \
++      {                                                                             \
++      char *newp = realloc (malloc_tmpbuf ? tmpbuf : NULL,                  \
++                            2 * tmpbuflen);                                 \
++      if (newp == NULL)                                                     \
++        {                                                                   \
++          result = -EAI_MEMORY;                                             \
++          goto free_and_return;                                             \
++        }                                                                   \
++      tmpbuf = newp;                                                        \
++      malloc_tmpbuf = true;                                                 \
++      tmpbuflen = 2 * tmpbuflen;                                            \
++      }                                                                             \
+   }                                                                         \
+   if (status == NSS_STATUS_SUCCESS && rc == 0)                                      \
+     h = &th;                                                                \
+@@ -209,7 +224,8 @@ gaih_inet_serv (const char *servicename, const struct gaih_typeproto *tp,
+       {                                                                     \
+         __set_h_errno (herrno);                                             \
+         _res.options = old_res_options;                                     \
+-        return -EAI_SYSTEM;                                                 \
++        result = -EAI_SYSTEM;                                               \
++        goto free_and_return;                                               \
+       }                                                                     \
+       if (herrno == TRY_AGAIN)                                                      \
+       no_data = EAI_AGAIN;                                                  \
+
+diff --git a/manual/conf.texi b/manual/conf.texi
+index 7eb8b36..c720063 100644
+--- a/manual/conf.texi
++++ b/manual/conf.texi
+@@ -1149,6 +1149,9 @@ typed ahead as input.  @xref{I/O Queues}.
+ @comment POSIX.1
+ @deftypevr Macro int NAME_MAX
+ The uniform system limit (if any) for the length of a file name component.
++
++@strong{Portability Note:} On some systems, the GNU C Library defines
++@code{NAME_MAX}, but does not actually enforce this limit.
+ @end deftypevr
+ 
+ @comment limits.h
+@@ -1157,6 +1160,9 @@ including the terminating null character.
+ @deftypevr Macro int PATH_MAX
+ The uniform system limit (if any) for the length of an entire file name (that
+ is, the argument given to system calls such as @code{open}).
++
++@strong{Portability Note:} The GNU C Library does not enforce this limit
++even if @code{PATH_MAX} is defined.
+ @end deftypevr
+ 
+ @cindex limits, pipe buffer size
+@@ -1476,6 +1482,9 @@ Inquire about the value of @code{POSIX_REC_MIN_XFER_SIZE}.
+ Inquire about the value of @code{POSIX_REC_XFER_ALIGN}.
+ @end table
+ 
++@strong{Portability Note:} On some systems, the GNU C Library does not
++enforce @code{_PC_NAME_MAX} or @code{_PC_PATH_MAX} limits.
++
+ @node Utility Limits
+ @section Utility Program Capacity Limits
+ 
+diff --git a/manual/filesys.texi b/manual/filesys.texi
+index 1df9cf2..814c210 100644
+--- a/manual/filesys.texi
++++ b/manual/filesys.texi
+@@ -444,9 +444,9 @@ symbols are declared in the header file @file{dirent.h}.
+ @comment POSIX.1
+ @deftypefun {struct dirent *} readdir (DIR *@var{dirstream})
+ This function reads the next entry from the directory.  It normally
+-returns a pointer to a structure containing information about the file.
+-This structure is statically allocated and can be rewritten by a
+-subsequent call.
++returns a pointer to a structure containing information about the
++file.  This structure is associated with the @var{dirstream} handle
++and can be rewritten by a subsequent call.
+ 
+ @strong{Portability Note:} On some systems @code{readdir} may not
+ return entries for @file{.} and @file{..}, even though these are always
+@@ -461,19 +461,61 @@ conditions are defined for this function:
+ The @var{dirstream} argument is not valid.
+ @end table
+ 
+-@code{readdir} is not thread safe.  Multiple threads using
+-@code{readdir} on the same @var{dirstream} may overwrite the return
+-value.  Use @code{readdir_r} when this is critical.
++To distinguish between an end-of-directory condition or an error, you
++must set @code{errno} to zero before calling @code{readdir}.  To avoid
++entering an infinite loop, you should stop reading from the directory
++after the first error.
++
++In POSIX.1-2008, @code{readdir} is not thread-safe.  In the GNU C Library
++implementation, it is safe to call @code{readdir} concurrently on
++different @var{dirstream}s, but multiple threads accessing the same
++@var{dirstream} result in undefined behavior.  @code{readdir_r} is a
++fully thread-safe alternative, but suffers from poor portability (see
++below).  It is recommended that you use @code{readdir}, with external
++locking if multiple threads access the same @var{dirstream}.
+ @end deftypefun
+ 
+ @comment dirent.h
+ @comment GNU
+ @deftypefun int readdir_r (DIR *@var{dirstream}, struct dirent *@var{entry}, struct dirent **@var{result})
+-This function is the reentrant version of @code{readdir}.  Like
+-@code{readdir} it returns the next entry from the directory.  But to
+-prevent conflicts between simultaneously running threads the result is
+-not stored in statically allocated memory.  Instead the argument
+-@var{entry} points to a place to store the result.
++This function is a version of @code{readdir} which performs internal
++locking.  Like @code{readdir} it returns the next entry from the
++directory.  To prevent conflicts between simultaneously running
++threads the result is stored inside the @var{entry} object.
++
++@strong{Portability Note:} It is recommended to use @code{readdir}
++instead of @code{readdir_r} for the following reasons:
++
++@itemize @bullet
++@item
++On systems which do not define @code{NAME_MAX}, it may not be possible
++to use @code{readdir_r} safely because the caller does not specify the
++length of the buffer for the directory entry.
++
++@item
++On some systems, @code{readdir_r} cannot read directory entries with
++very long names.  If such a name is encountered, the GNU C Library
++implementation of @code{readdir_r} returns with an error code of
++@code{ENAMETOOLONG} after the final directory entry has been read.  On
++other systems, @code{readdir_r} may return successfully, but the
++@code{d_name} member may not be NUL-terminated or may be truncated.
++
++@item
++POSIX-1.2008 does not guarantee that @code{readdir} is thread-safe,
++even when access to the same @var{dirstream} is serialized.  But in
++current implementations (including the GNU C Library), it is safe to call
++@code{readdir} concurrently on different @var{dirstream}s, so there is
++no need to use @code{readdir_r} in most multi-threaded programs.  In
++the rare case that multiple threads need to read from the same
++@var{dirstream}, it is still better to use @code{readdir} and external
++synchronization.
++
++@item
++It is expected that future versions of POSIX will obsolete
++@code{readdir_r} and mandate the level of thread safety for
++@code{readdir} which is provided by the GNU C Library and other
++implementations today.
++@end itemize
+ 
+ Normally @code{readdir_r} returns zero and sets @code{*@var{result}}
+ to @var{entry}.  If there are no more entries in the directory or an
+@@ -481,15 +523,6 @@ error is detected, @code{readdir_r} sets @code{*@var{result}} to a
+ null pointer and returns a nonzero error code, also stored in
+ @code{errno}, as described for @code{readdir}.
+ 
+-@strong{Portability Note:} On some systems @code{readdir_r} may not
+-return a NUL terminated string for the file name, even when there is no
+-@code{d_reclen} field in @code{struct dirent} and the file
+-name is the maximum allowed size.  Modern systems all have the
+-@code{d_reclen} field, and on old systems multi-threading is not
+-critical.  In any case there is no such problem with the @code{readdir}
+-function, so that even on systems without the @code{d_reclen} member one
+-could use multiple threads by using external locking.
+-
+ It is also important to look at the definition of the @code{struct
+ dirent} type.  Simply passing a pointer to an object of this type for
+ the second parameter of @code{readdir_r} might not be enough.  Some
+diff --git a/sysdeps/unix/dirstream.h b/sysdeps/unix/dirstream.h
+index a7a074d..8e8570d 100644
+--- a/sysdeps/unix/dirstream.h
++++ b/sysdeps/unix/dirstream.h
+@@ -39,6 +39,8 @@ struct __dirstream
+ 
+     off_t filepos;            /* Position of next entry to read.  */
+ 
++    int errcode;              /* Delayed error code.  */
++
+     /* Directory block.  */
+     char data[0] __attribute__ ((aligned (__alignof__ (void*))));
+   };
+diff --git a/sysdeps/unix/opendir.c b/sysdeps/unix/opendir.c
+index ddfc3a7..fc05b0f 100644
+--- a/sysdeps/unix/opendir.c
++++ b/sysdeps/unix/opendir.c
+@@ -231,6 +231,7 @@ __alloc_dir (int fd, bool close_fd, int flags, const struct stat64 *statp)
+   dirp->size = 0;
+   dirp->offset = 0;
+   dirp->filepos = 0;
++  dirp->errcode = 0;
+ 
+   return dirp;
+ }
+diff --git a/sysdeps/unix/readdir_r.c b/sysdeps/unix/readdir_r.c
+index b5a8e2e..8ed5c3f 100644
+--- a/sysdeps/unix/readdir_r.c
++++ b/sysdeps/unix/readdir_r.c
+@@ -40,6 +40,7 @@ __READDIR_R (DIR *dirp, DIRENT_TYPE *entry, DIRENT_TYPE **result)
+   DIRENT_TYPE *dp;
+   size_t reclen;
+   const int saved_errno = errno;
++  int ret;
+ 
+   __libc_lock_lock (dirp->lock);
+ 
+@@ -70,10 +71,10 @@ __READDIR_R (DIR *dirp, DIRENT_TYPE *entry, DIRENT_TYPE **result)
+                 bytes = 0;
+                 __set_errno (saved_errno);
+               }
++            if (bytes < 0)
++              dirp->errcode = errno;
+ 
+             dp = NULL;
+-            /* Reclen != 0 signals that an error occurred.  */
+-            reclen = bytes != 0;
+             break;
+           }
+         dirp->size = (size_t) bytes;
+@@ -106,28 +107,46 @@ __READDIR_R (DIR *dirp, DIRENT_TYPE *entry, DIRENT_TYPE **result)
+       dirp->filepos += reclen;
+ #endif
+ 
+-      /* Skip deleted files.  */
++#ifdef NAME_MAX
++      if (reclen > offsetof (DIRENT_TYPE, d_name) + NAME_MAX + 1)
++      {
++        /* The record is very long.  It could still fit into the
++           caller-supplied buffer if we can skip padding at the
++           end.  */
++        size_t namelen = _D_EXACT_NAMLEN (dp);
++        if (namelen <= NAME_MAX)
++          reclen = offsetof (DIRENT_TYPE, d_name) + namelen + 1;
++        else
++          {
++            /* The name is too long.  Ignore this file.  */
++            dirp->errcode = ENAMETOOLONG;
++            dp->d_ino = 0;
++            continue;
++          }
++      }
++#endif
++
++      /* Skip deleted and ignored files.  */
+     }
+   while (dp->d_ino == 0);
+ 
+   if (dp != NULL)
+     {
+-#ifdef GETDENTS_64BIT_ALIGNED
+-      /* The d_reclen value might include padding which is not part of
+-       the DIRENT_TYPE data structure.  */
+-      reclen = MIN (reclen, sizeof (DIRENT_TYPE));
+-#endif
+       *result = memcpy (entry, dp, reclen);
+-#ifdef GETDENTS_64BIT_ALIGNED
++#ifdef _DIRENT_HAVE_D_RECLEN
+       entry->d_reclen = reclen;
+ #endif
++      ret = 0;
+     }
+   else
+-    *result = NULL;
++    {
++      *result = NULL;
++      ret = dirp->errcode;
++    }
+ 
+   __libc_lock_unlock (dirp->lock);
+ 
+-  return dp != NULL ? 0 : reclen ? errno : 0;
++  return ret;
+ }
+ 
+ #ifdef __READDIR_R_ALIAS
+diff --git a/sysdeps/unix/rewinddir.c b/sysdeps/unix/rewinddir.c
+index 2935a8e..d4991ad 100644
+--- a/sysdeps/unix/rewinddir.c
++++ b/sysdeps/unix/rewinddir.c
+@@ -33,5 +33,6 @@ rewinddir (dirp)
+   dirp->filepos = 0;
+   dirp->offset = 0;
+   dirp->size = 0;
++  dirp->errcode = 0;
+   __libc_lock_unlock (dirp->lock);
+ }
+diff --git a/sysdeps/unix/sysv/linux/i386/readdir64_r.c b/sysdeps/unix/sysv/linux/i386/readdir64_r.c
+index 8ebbcfd..a7d114e 100644
+--- a/sysdeps/unix/sysv/linux/i386/readdir64_r.c
++++ b/sysdeps/unix/sysv/linux/i386/readdir64_r.c
+@@ -18,7 +18,6 @@
+ #define __READDIR_R __readdir64_r
+ #define __GETDENTS __getdents64
+ #define DIRENT_TYPE struct dirent64
+-#define GETDENTS_64BIT_ALIGNED 1
+ 
+ #include <sysdeps/unix/readdir_r.c>
+ 

diff --git a/src/patches/glibc/glibc-rh1139571.patch b/src/patches/glibc/glibc-rh1139571.patch
new file mode 100644 (file)
index 0000000..b1320a7
--- /dev/null
+++ b/src/patches/glibc/glibc-rh1139571.patch
@@ -0,0 +1,154 @@
+commit 41488498b6d9440ee66ab033808cce8323bba7ac
+Author: Florian Weimer <fweimer@redhat.com>
+Date:   Wed Sep 3 19:45:43 2014 +0200
+
+    CVE-2014-6040: Crashes on invalid input in IBM gconv modules [BZ #17325]
+    
+    These changes are based on the fix for BZ #14134 in commit
+    6e230d11837f3ae7b375ea69d7905f0d18eb79e5.
+
+diff --git a/iconvdata/Makefile b/iconvdata/Makefile
+index 0a410a1..b6327d6 100644
+--- a/iconvdata/Makefile
++++ b/iconvdata/Makefile
+@@ -297,6 +297,7 @@ $(objpfx)tst-iconv7.out: $(objpfx)gconv-modules \
+ $(objpfx)iconv-test.out: run-iconv-test.sh $(objpfx)gconv-modules \
+                        $(addprefix $(objpfx),$(modules.so)) \
+                        $(common-objdir)/iconv/iconv_prog TESTS
++      iconv_modules="$(modules)" \
+       $(SHELL) -e $< $(common-objdir) > $@
+ 
+ $(objpfx)tst-tables.out: tst-tables.sh $(objpfx)gconv-modules \
+diff --git a/iconvdata/ibm1364.c b/iconvdata/ibm1364.c
+index 0b5484f..cf80993 100644
+--- a/iconvdata/ibm1364.c
++++ b/iconvdata/ibm1364.c
+@@ -221,7 +221,8 @@ enum
+         ++rp2;                                                              \
+                                                                             \
+       uint32_t res;                                                         \
+-      if (__builtin_expect (ch < rp2->start, 0)                             \
++      if (__builtin_expect (rp2->start == 0xffff, 0)                        \
++          || __builtin_expect (ch < rp2->start, 0)                          \
+           || (res = DB_TO_UCS4[ch + rp2->idx],                              \
+               __builtin_expect (res, L'\1') == L'\0' && ch != '\0'))        \
+         {                                                                   \
+diff --git a/iconvdata/ibm932.c b/iconvdata/ibm932.c
+index f5dca59..aa69d65 100644
+--- a/iconvdata/ibm932.c
++++ b/iconvdata/ibm932.c
+@@ -74,11 +74,12 @@
+         }                                                                   \
+                                                                             \
+       ch = (ch * 0x100) + inptr[1];                                         \
++      /* ch was less than 0xfd.  */                                         \
++      assert (ch < 0xfd00);                                                 \
+       while (ch > rp2->end)                                                 \
+         ++rp2;                                                              \
+                                                                             \
+-      if (__builtin_expect (rp2 == NULL, 0)                                 \
+-          || __builtin_expect (ch < rp2->start, 0)                          \
++      if (__builtin_expect (ch < rp2->start, 0)                             \
+           || (res = __ibm932db_to_ucs4[ch + rp2->idx],                      \
+           __builtin_expect (res, '\1') == 0 && ch !=0))                     \
+         {                                                                   \
+diff --git a/iconvdata/ibm933.c b/iconvdata/ibm933.c
+index f46dfb5..461fb5e 100644
+--- a/iconvdata/ibm933.c
++++ b/iconvdata/ibm933.c
+@@ -162,7 +162,7 @@ enum
+       while (ch > rp2->end)                                                 \
+         ++rp2;                                                              \
+                                                                             \
+-      if (__builtin_expect (rp2 == NULL, 0)                                 \
++      if (__builtin_expect (rp2->start == 0xffff, 0)                        \
+           || __builtin_expect (ch < rp2->start, 0)                          \
+           || (res = __ibm933db_to_ucs4[ch + rp2->idx],                      \
+               __builtin_expect (res, L'\1') == L'\0' && ch != '\0'))        \
+diff --git a/iconvdata/ibm935.c b/iconvdata/ibm935.c
+index a8e4e6c..132d816 100644
+--- a/iconvdata/ibm935.c
++++ b/iconvdata/ibm935.c
+@@ -162,7 +162,7 @@ enum
+       while (ch > rp2->end)                                                 \
+         ++rp2;                                                              \
+                                                                             \
+-      if (__builtin_expect (rp2 == NULL, 0)                                 \
++      if (__builtin_expect (rp2->start == 0xffff, 0)                        \
+           || __builtin_expect (ch < rp2->start, 0)                          \
+           || (res = __ibm935db_to_ucs4[ch + rp2->idx],                      \
+               __builtin_expect (res, L'\1') == L'\0' && ch != '\0'))        \
+diff --git a/iconvdata/ibm937.c b/iconvdata/ibm937.c
+index 239be61..69b154d 100644
+--- a/iconvdata/ibm937.c
++++ b/iconvdata/ibm937.c
+@@ -162,7 +162,7 @@ enum
+       while (ch > rp2->end)                                                 \
+         ++rp2;                                                              \
+                                                                             \
+-      if (__builtin_expect (rp2 == NULL, 0)                                 \
++      if (__builtin_expect (rp2->start == 0xffff, 0)                        \
+           || __builtin_expect (ch < rp2->start, 0)                          \
+           || (res = __ibm937db_to_ucs4[ch + rp2->idx],                      \
+               __builtin_expect (res, L'\1') == L'\0' && ch != '\0'))        \
+diff --git a/iconvdata/ibm939.c b/iconvdata/ibm939.c
+index 5d0db36..9936e2c 100644
+--- a/iconvdata/ibm939.c
++++ b/iconvdata/ibm939.c
+@@ -162,7 +162,7 @@ enum
+       while (ch > rp2->end)                                                 \
+         ++rp2;                                                              \
+                                                                             \
+-      if (__builtin_expect (rp2 == NULL, 0)                                 \
++      if (__builtin_expect (rp2->start == 0xffff, 0)                        \
+           || __builtin_expect (ch < rp2->start, 0)                          \
+           || (res = __ibm939db_to_ucs4[ch + rp2->idx],                      \
+               __builtin_expect (res, L'\1') == L'\0' && ch != '\0'))        \
+diff --git a/iconvdata/ibm943.c b/iconvdata/ibm943.c
+index be0c14f..c5d5742 100644
+--- a/iconvdata/ibm943.c
++++ b/iconvdata/ibm943.c
+@@ -75,11 +75,12 @@
+         }                                                                   \
+                                                                             \
+       ch = (ch * 0x100) + inptr[1];                                         \
++      /* ch was less than 0xfd.  */                                         \
++      assert (ch < 0xfd00);                                                 \
+       while (ch > rp2->end)                                                 \
+         ++rp2;                                                              \
+                                                                             \
+-      if (__builtin_expect (rp2 == NULL, 0)                                 \
+-          || __builtin_expect (ch < rp2->start, 0)                          \
++      if (__builtin_expect (ch < rp2->start, 0)                             \
+           || (res = __ibm943db_to_ucs4[ch + rp2->idx],                      \
+           __builtin_expect (res, '\1') == 0 && ch !=0))                     \
+         {                                                                   \
+diff --git a/iconvdata/run-iconv-test.sh b/iconvdata/run-iconv-test.sh
+index c98c929..5dfb69f 100755
+--- a/iconvdata/run-iconv-test.sh
++++ b/iconvdata/run-iconv-test.sh
+@@ -184,6 +184,24 @@ while read utf8 from filename; do
+ 
+ done < TESTS2
+ 
++# Check for crashes in decoders.
++printf '\016\377\377\377\377\377\377\377' > $temp1
++for from in $iconv_modules ; do
++    echo $ac_n "test decoder $from $ac_c"
++    PROG=`eval echo $ICONV`
++    if $PROG < $temp1 >/dev/null 2>&1 ; then
++      : # fall through
++    else
++      status=$?
++      if test $status -gt 1 ; then
++          echo "/FAILED"
++          failed=1
++          continue
++      fi
++    fi
++    echo "OK"
++done
++
+ exit $failed
+ # Local Variables:
+ #  mode:shell-script

diff --git a/src/patches/glibc/glibc-rh1154563.patch b/src/patches/glibc/glibc-rh1154563.patch
new file mode 100644 (file)
index 0000000..22821b1
--- /dev/null
+++ b/src/patches/glibc/glibc-rh1154563.patch
@@ -0,0 +1,333 @@
+#
+# This is a special patch for rhel-6 to fix recursive dlopen.
+# It is likely the upstream patch will always be too risky for
+# rhel-6 and will involve reorganizing the way in which recursive
+# dlopen is allowed to operate and how the _r_debug and stap
+# points are used by gdb for the recursive case.
+#
+# This fix changes the internal API to duplicate the ldconfig
+# cache data. This means that at any point the cache can be
+# unmapped without any consequences. The caller is responsible
+# fore freeing the returned string.
+#
+# A regression test is added to verify the assertion for _r_debug
+# is no longer triggered due to the recursive dlopen. The test to
+# verify the fix in _dl_load_cache_lookup is not automated and
+# has to be run by hand.
+#
+diff -urN glibc-2.12-2-gc4ccff1/elf/dl-cache.c glibc-2.12-2-gc4ccff1.mod/elf/dl-cache.c
+--- glibc-2.12-2-gc4ccff1/elf/dl-cache.c       2010-05-04 07:27:23.000000000 -0400
++++ glibc-2.12-2-gc4ccff1.mod/elf/dl-cache.c   2014-12-10 21:54:08.801985045 -0500
+@@ -175,9 +175,12 @@
+ 
+ 
+ /* Look up NAME in ld.so.cache and return the file name stored there,
+-   or null if none is found.  */
+-
+-const char *
++   or null if none is found. 
++   The caller is responsible for freeing the returned string.  The ld.so.cache
++   may be unmapped at any time by a completing recursive dlopen and
++   this function must take care that it does not return references to
++   any data in the mapping.  */
++char *
+ internal_function
+ _dl_load_cache_lookup (const char *name)
+ {
+@@ -290,7 +293,17 @@
+       && best != NULL)
+     _dl_debug_printf ("  trying file=%s\n", best);
+ 
+-  return best;
++  if (best == NULL)
++    return NULL;
++
++  /* The double copy is *required* since malloc may be interposed
++     and call dlopen itself whose completion would unmap the data
++     we are accessing. Therefore we must make the copy of the
++     mapping data without using malloc.  */
++  char *temp;
++  temp = alloca (strlen (best) + 1);
++  strcpy (temp, best);
++  return strdup (temp);
+ }
+ 
+ #ifndef MAP_COPY
+diff -urN glibc-2.12-2-gc4ccff1/elf/dl-load.c glibc-2.12-2-gc4ccff1.mod/elf/dl-load.c
+--- glibc-2.12-2-gc4ccff1/elf/dl-load.c        2014-12-10 11:03:17.966048404 -0500
++++ glibc-2.12-2-gc4ccff1.mod/elf/dl-load.c    2014-12-10 21:47:29.319387538 -0500
+@@ -2126,7 +2126,7 @@
+       {
+         /* Check the list of libraries in the file /etc/ld.so.cache,
+            for compatibility with Linux's ldconfig program.  */
+-        const char *cached = _dl_load_cache_lookup (name);
++        char *cached = _dl_load_cache_lookup (name);
+ 
+         if (cached != NULL)
+           {
+@@ -2156,6 +2156,7 @@
+                     if (memcmp (cached, dirp, system_dirs_len[cnt]) == 0)
+                       {
+                         /* The prefix matches.  Don't use the entry.  */
++                        free (cached);
+                         cached = NULL;
+                         break;
+                       }
+@@ -2172,14 +2173,9 @@
+                                   &fb, loader ?: GL(dl_ns)[nsid]._ns_loaded,
+                                   LA_SER_CONFIG, &found_other_class, false);
+                 if (__builtin_expect (fd != -1, 1))
+-                  {
+-                    realname = local_strdup (cached);
+-                    if (realname == NULL)
+-                      {
+-                        __close (fd);
+-                        fd = -1;
+-                      }
+-                  }
++                  realname = cached;
++                else
++                  free (cached);
+               }
+           }
+       }
+diff -urN glibc-2.12-2-gc4ccff1/elf/dl-open.c glibc-2.12-2-gc4ccff1.mod/elf/dl-open.c
+--- glibc-2.12-2-gc4ccff1/elf/dl-open.c        2014-12-10 11:03:18.083048497 -0500
++++ glibc-2.12-2-gc4ccff1.mod/elf/dl-open.c    2014-12-10 20:34:16.017503638 -0500
+@@ -220,7 +220,11 @@
+       }
+     }
+ 
+-  assert (_dl_debug_initialize (0, args->nsid)->r_state == RT_CONSISTENT);
++  /* One might be tempted to assert that we are RT_CONSISTENT at this point, but that
++     may not be true if this is a recursive call to dlopen.
++     TODO: Fix all of the debug state so we end up at RT_CONSISTENT only when the last
++     recursive dlopen completes.  */
++  _dl_debug_initialize (0, args->nsid);
+ 
+   /* Load the named object.  */
+   struct link_map *new;
+diff -urN glibc-2.12-2-gc4ccff1/sysdeps/generic/ldsodefs.h glibc-2.12-2-gc4ccff1.mod/sysdeps/generic/ldsodefs.h
+--- glibc-2.12-2-gc4ccff1/sysdeps/generic/ldsodefs.h   2014-12-10 11:03:17.944048387 -0500
++++ glibc-2.12-2-gc4ccff1.mod/sysdeps/generic/ldsodefs.h       2014-12-10 21:46:14.071344018 -0500
+@@ -996,8 +996,8 @@
+      internal_function;
+ 
+ /* Look up NAME in ld.so.cache and return the file name stored there,
+-   or null if none is found.  */
+-extern const char *_dl_load_cache_lookup (const char *name)
++   or null if none is found.  Caller must free returned string.  */
++extern char *_dl_load_cache_lookup (const char *name)
+      internal_function;
+ 
+ /* If the system does not support MAP_COPY we cannot leave the file open
+diff -urN glibc-2.12-2-gc4ccff1/dlfcn/Makefile glibc-2.12-2-gc4ccff1.mod/dlfcn/Makefile
+--- glibc-2.12-2-gc4ccff1/dlfcn/Makefile       2010-05-04 07:27:23.000000000 -0400
++++ glibc-2.12-2-gc4ccff1.mod/dlfcn/Makefile   2014-12-11 16:58:55.719803063 -0500
+@@ -42,12 +42,12 @@
+ ifeq (yes,$(build-shared))
+ tests = glrefmain failtest tst-dladdr default errmsg1 tstcxaatexit \
+       bug-dlopen1 bug-dlsym1 tst-dlinfo bug-atexit1 bug-atexit2 \
+-      bug-atexit3 tstatexit
++      bug-atexit3 tstatexit tst-rec-dlopen
+ endif
+ modules-names = glreflib1 glreflib2 glreflib3 failtestmod defaultmod1 \
+               defaultmod2 errmsg1mod modatexit modcxaatexit \
+               bug-dlsym1-lib1 bug-dlsym1-lib2 bug-atexit1-lib \
+-              bug-atexit2-lib bug-atexit3-lib
++              bug-atexit2-lib bug-atexit3-lib moddummy1 moddummy2
+ 
+ failtestmod.so-no-z-defs = yes
+ glreflib2.so-no-z-defs = yes
+@@ -142,6 +142,8 @@
+ $(objpfx)bug-atexit3-lib.so: $(common-objpfx)libc.so \
+                            $(common-objpfx)libc_nonshared.a
+ 
++LDLIBS-tst-rec-dlopen = -ldl
++$(objpfx)tst-rec-dlopen: $(libdl)
+ 
+ # Depend on libc.so so a DT_NEEDED is generated in the shared objects.
+ # This ensures they will load libc.so for needed symbols if loaded by
+diff -urN glibc-2.12-2-gc4ccff1/dlfcn/moddummy1.c glibc-2.12-2-gc4ccff1.mod/dlfcn/moddummy1.c
+--- glibc-2.12-2-gc4ccff1/dlfcn/moddummy1.c    1969-12-31 19:00:00.000000000 -0500
++++ glibc-2.12-2-gc4ccff1.mod/dlfcn/moddummy1.c        2014-12-11 16:57:54.108797285 -0500
+@@ -0,0 +1,13 @@
++/* Provide a dummy DSO for tst-recursive-dlopen to use.  */
++#include <stdio.h>
++#include <stdlib.h>
++
++int called_dummy1;
++
++void
++dummy1 (void)
++{
++  printf ("Called dummy1()\n");
++  called_dummy1++;
++}
++
+diff -urN glibc-2.12-2-gc4ccff1/dlfcn/moddummy2.c glibc-2.12-2-gc4ccff1.mod/dlfcn/moddummy2.c
+--- glibc-2.12-2-gc4ccff1/dlfcn/moddummy2.c    1969-12-31 19:00:00.000000000 -0500
++++ glibc-2.12-2-gc4ccff1.mod/dlfcn/moddummy2.c        2014-12-11 16:57:54.108797285 -0500
+@@ -0,0 +1,13 @@
++/* Provide a dummy DSO for tst-recursive-dlopen to use.  */
++#include <stdio.h>
++#include <stdlib.h>
++
++int called_dummy2;
++
++void
++dummy2 (void)
++{
++  printf ("Called dummy2()\n");
++  called_dummy2++;
++}
++
+diff -urN glibc-2.12-2-gc4ccff1/dlfcn/tst-rec-dlopen.c glibc-2.12-2-gc4ccff1.mod/dlfcn/tst-rec-dlopen.c
+--- glibc-2.12-2-gc4ccff1/dlfcn/tst-rec-dlopen.c       1969-12-31 19:00:00.000000000 -0500
++++ glibc-2.12-2-gc4ccff1.mod/dlfcn/tst-rec-dlopen.c   2014-12-11 20:53:28.617848774 -0500
+@@ -0,0 +1,145 @@
++/* Test recursive dlopen using malloc hooks.
++   Copyright (C) 1998-2014 Free Software Foundation, Inc.
++   This file is part of the GNU C Library.
++   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1998.
++
++   The GNU C Library is free software; you can redistribute it and/or
++   modify it under the terms of the GNU Lesser General Public
++   License as published by the Free Software Foundation; either
++   version 2.1 of the License, or (at your option) any later version.
++
++   The GNU C Library is distributed in the hope that it will be useful,
++   but WITHOUT ANY WARRANTY; without even the implied warranty of
++   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++   Lesser General Public License for more details.
++
++   You should have received a copy of the GNU Lesser General Public
++   License along with the GNU C Library; if not, see
++   <http://www.gnu.org/licenses/>.  */
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <malloc.h>
++#include <dlfcn.h>
++
++#define DSO "moddummy1.so"
++#define FUNC "dummy1"
++
++#define DSO1 "moddummy2.so"
++#define FUNC1 "dummy2"
++
++/* Prevent the compiler from moving the assignment to called_func
++   before (*func)() since the compiler doesn't know we might abort
++   or catch a SIGSEGV signal and it may move the store.  */
++volatile int called_func;
++
++/* Prototype for my hook.  */
++void *custom_malloc_hook (size_t, const void *);
++
++/* Pointer to old malloc hooks.  */
++void *(*old_malloc_hook) (size_t, const void *);
++
++/* Call function func_name in DSO dso_name via dlopen.  */
++void
++call_func (const char *dso_name, const char *func_name)
++{
++  int ret;
++  void *dso;
++  void (*func) (void);
++  char *err;
++
++  /* Open the DSO.  */
++  dso = dlopen (dso_name, RTLD_NOW|RTLD_GLOBAL);
++  if (dso == NULL)
++    {
++      err = dlerror ();
++      fprintf (stderr, "%s\n", err);
++      exit (1);
++    }
++  /* Clear any errors.  */
++  dlerror ();
++
++  /* Lookup func.  */
++  *(void **) (&func) = dlsym (dso, func_name);
++  if (func == NULL)
++    {
++      err = dlerror ();
++      if (err != NULL)
++        {
++        fprintf (stderr, "%s\n", err);
++        exit (1);
++        }
++    }
++  /* Call func.  */
++  (*func) ();
++  called_func = 1;
++
++  /* Close the library and look for errors too.  */
++  ret = dlclose (dso);
++  if (ret != 0)
++    {
++      err = dlerror ();
++      fprintf (stderr, "%s\n", err);
++      exit (1);
++    }
++
++}
++
++/* Empty hook that does nothing.  */
++void *
++custom_malloc_hook (size_t size, const void *caller)
++{
++  void *result;
++  /* Restore old hooks.  */
++  __malloc_hook = old_malloc_hook;
++  /* First call a function in another library via dlopen.  */
++  call_func (DSO1, FUNC1);
++  /* Called recursively.  */
++  result = malloc (size);
++  /* Restore new hooks.  */
++  __malloc_hook = custom_malloc_hook;
++  return result;
++}
++
++static int
++do_test (void)
++{
++  /* Save old hook.  */
++  old_malloc_hook = __malloc_hook;
++  /* Install new hook.  */
++  __malloc_hook = custom_malloc_hook;
++
++  /* Bug 17702 fixes two things:
++       * A recursive dlopen unmapping the ld.so.cache.
++       * An assertion that _r_debug is RT_CONSISTENT at entry to dlopen.
++     We can only test the latter. Testing the former requires modifying
++     ld.so.conf to cache the dummy libraries, then running ldconfig,
++     then run the test. If you do all of that (and glibc's test
++     infrastructure doesn't support that yet) then the test will
++     SEGFAULT without the fix. If you don't do that, then the test
++     will abort because of the assert described in detail below.  */
++  call_func (DSO, FUNC);
++
++  /* Restore old hook.  */
++  __malloc_hook = old_malloc_hook;
++
++  /* The function dummy2() is called by the malloc hook. Check to
++     see that it was called. This ensures the second recursive
++     dlopen happened and we called the function in that library.
++
++     Before the fix you either get a SIGSEGV when accessing mmap'd
++     ld.so.cache data or an assertion failure about _r_debug not
++     beint RT_CONSISTENT.  We don't test for the SIGSEGV since it
++     would require finding moddummy1 or moddummy2 in the cache and
++     we don't have any infrastructure to test that, but the _r_debug
++     assertion triggers.  */
++  if (called_func > 0)
++    printf ("PASS: Function call_func() called more than once.\n");
++  else
++    printf ("FAIL: Function call_func() not called.\n");
++
++  return 0;
++}
++
++#define TEST_FUNCTION do_test ()
++#include "../test-skeleton.c"

diff --git a/src/patches/glibc/glibc-rh1170121.patch b/src/patches/glibc/glibc-rh1170121.patch
new file mode 100644 (file)
index 0000000..1accbf3
--- /dev/null
+++ b/src/patches/glibc/glibc-rh1170121.patch
@@ -0,0 +1,163 @@
+#
+# commit a39208bd7fb76c1b01c127b4c61f9bfd915bfe7c
+# Author: Carlos O'Donell <carlos@redhat.com>
+# Date:   Wed Nov 19 11:44:12 2014 -0500
+# 
+#     CVE-2014-7817: wordexp fails to honour WRDE_NOCMD.
+#     
+#     The function wordexp() fails to properly handle the WRDE_NOCMD
+#     flag when processing arithmetic inputs in the form of "$((... ``))"
+#     where "..." can be anything valid. The backticks in the arithmetic
+#     epxression are evaluated by in a shell even if WRDE_NOCMD forbade
+#     command substitution. This allows an attacker to attempt to pass
+#     dangerous commands via constructs of the above form, and bypass
+#     the WRDE_NOCMD flag. This patch fixes this by checking for WRDE_NOCMD
+#     in exec_comm(), the only place that can execute a shell. All other
+#     checks for WRDE_NOCMD are superfluous and removed.
+#     
+#     We expand the testsuite and add 3 new regression tests of roughly
+#     the same form but with a couple of nested levels.
+#     
+#     On top of the 3 new tests we add fork validation to the WRDE_NOCMD
+#     testing. If any forks are detected during the execution of a wordexp()
+#     call with WRDE_NOCMD, the test is marked as failed. This is slightly
+#     heuristic since vfork might be used in the future, but it provides a
+#     higher level of assurance that no shells were executed as part of
+#     command substitution with WRDE_NOCMD in effect. In addition it doesn't
+#     require libpthread or libdl, instead we use the public implementation
+#     namespace function __register_atfork (already part of the public ABI
+#     for libpthread).
+#     
+#     Tested on x86_64 with no regressions.
+# 
+diff --git a/posix/wordexp-test.c b/posix/wordexp-test.c
+index 4957006..bdd65e4 100644
+--- a/posix/wordexp-test.c
++++ b/posix/wordexp-test.c
+@@ -27,6 +27,25 @@
+ 
+ #define IFS " \n\t"
+ 
++extern void *__dso_handle __attribute__ ((__weak__, __visibility__ ("hidden")));
++extern int __register_atfork (void (*) (void), void (*) (void), void (*) (void), void *);
++
++static int __app_register_atfork (void (*prepare) (void), void (*parent) (void), void (*child) (void))
++{
++  return __register_atfork (prepare, parent, child,
++                          &__dso_handle == NULL ? NULL : __dso_handle);
++}
++
++/* Number of forks seen.  */
++static int registered_forks;
++
++/* For each fork increment the fork count.  */
++static void
++register_fork (void)
++{
++  registered_forks++;
++}
++
+ struct test_case_struct
+ {
+   int retval;
+@@ -206,6 +225,12 @@ struct test_case_struct
+     { WRDE_SYNTAX, NULL, "$((2+))", 0, 0, { NULL, }, IFS },
+     { WRDE_SYNTAX, NULL, "`", 0, 0, { NULL, }, IFS },
+     { WRDE_SYNTAX, NULL, "$((010+4+))", 0, 0, { NULL }, IFS },
++    /* Test for CVE-2014-7817. We test 3 combinations of command
++       substitution inside an arithmetic expression to make sure that
++       no commands are executed and error is returned.  */
++    { WRDE_CMDSUB, NULL, "$((`echo 1`))", WRDE_NOCMD, 0, { NULL, }, IFS },
++    { WRDE_CMDSUB, NULL, "$((1+`echo 1`))", WRDE_NOCMD, 0, { NULL, }, IFS },
++    { WRDE_CMDSUB, NULL, "$((1+$((`echo 1`))))", WRDE_NOCMD, 0, { NULL, }, IFS },
+ 
+     { -1, NULL, NULL, 0, 0, { NULL, }, IFS },
+   };
+@@ -258,6 +283,15 @@ main (int argc, char *argv[])
+         return -1;
+     }
+ 
++  /* If we are not allowed to do command substitution, we install
++     fork handlers to verify that no forks happened.  No forks should
++     happen at all if command substitution is disabled.  */
++  if (__app_register_atfork (register_fork, NULL, NULL) != 0)
++    {
++      printf ("Failed to register fork handler.\n");
++      return -1;
++    }
++
+   for (test = 0; test_case[test].retval != -1; test++)
+     if (testit (&test_case[test]))
+       ++fail;
+@@ -367,6 +401,9 @@ testit (struct test_case_struct *tc)
+ 
+   printf ("Test %d (%s): ", ++tests, tc->words);
+ 
++  if (tc->flags & WRDE_NOCMD)
++    registered_forks = 0;
++
+   if (tc->flags & WRDE_APPEND)
+     {
+       /* initial wordexp() call, to be appended to */
+@@ -378,6 +415,13 @@ testit (struct test_case_struct *tc)
+     }
+   retval = wordexp (tc->words, &we, tc->flags);
+ 
++  if ((tc->flags & WRDE_NOCMD)
++      && (registered_forks > 0))
++    {
++        printf ("FAILED fork called for WRDE_NOCMD\n");
++        return 1;
++    }
++
+   if (tc->flags & WRDE_DOOFFS)
+       start_offs = sav_we.we_offs;
+ 
+diff --git a/posix/wordexp.c b/posix/wordexp.c
+index b6b65dd..26f3a26 100644
+--- a/posix/wordexp.c
++++ b/posix/wordexp.c
+@@ -893,6 +893,10 @@ exec_comm (char *comm, char **word, size_t *word_length, size_t *max_length,
+   pid_t pid;
+   int noexec = 0;
+ 
++  /* Do nothing if command substitution should not succeed.  */
++  if (flags & WRDE_NOCMD)
++    return WRDE_CMDSUB;
++
+   /* Don't fork() unless necessary */
+   if (!comm || !*comm)
+     return 0;
+@@ -2082,9 +2086,6 @@ parse_dollars (char **word, size_t *word_length, size_t *max_length,
+           }
+       }
+ 
+-      if (flags & WRDE_NOCMD)
+-      return WRDE_CMDSUB;
+-
+       (*offset) += 2;
+       return parse_comm (word, word_length, max_length, words, offset, flags,
+                        quoted? NULL : pwordexp, ifs, ifs_white);
+@@ -2196,9 +2197,6 @@ parse_dquote (char **word, size_t *word_length, size_t *max_length,
+         break;
+ 
+       case '`':
+-        if (flags & WRDE_NOCMD)
+-          return WRDE_CMDSUB;
+-
+         ++(*offset);
+         error = parse_backtick (word, word_length, max_length, words,
+                                 offset, flags, NULL, NULL, NULL);
+@@ -2357,12 +2355,6 @@ wordexp (const char *words, wordexp_t *pwordexp, int flags)
+       break;
+ 
+       case '`':
+-      if (flags & WRDE_NOCMD)
+-        {
+-          error = WRDE_CMDSUB;
+-          goto do_error;
+-        }
+-
+       ++words_offset;
+       error = parse_backtick (&word, &word_length, &max_length, words,
+                               &words_offset, flags, pwordexp, ifs,

diff --git a/src/patches/glibc/glibc-rh1183533.patch b/src/patches/glibc/glibc-rh1183533.patch
new file mode 100644 (file)
index 0000000..9263cd5
--- /dev/null
+++ b/src/patches/glibc/glibc-rh1183533.patch
@@ -0,0 +1,210 @@
+commit d5dd6189d506068ed11c8bfa1e1e9bffde04decd
+Author: Andreas Schwab <schwab@suse.de>
+Date:   Mon Jan 21 17:41:28 2013 +0100
+
+    Fix parsing of numeric hosts in gethostbyname_r
+
+diff --git a/nss/digits_dots.c b/nss/digits_dots.c
+index 2b86295..e007ef4 100644
+--- a/nss/digits_dots.c
++++ b/nss/digits_dots.c
+@@ -46,7 +46,10 @@ __nss_hostname_digits_dots (const char *name, struct hostent *resbuf,
+     {
+       if (h_errnop)
+       *h_errnop = NETDB_INTERNAL;
+-      *result = NULL;
++      if (buffer_size == NULL)
++      *status = NSS_STATUS_TRYAGAIN;
++      else
++      *result = NULL;
+       return -1;
+     }
+ 
+@@ -83,14 +86,16 @@ __nss_hostname_digits_dots (const char *name, struct hostent *resbuf,
+       }
+ 
+       size_needed = (sizeof (*host_addr)
+-                   + sizeof (*h_addr_ptrs) + strlen (name) + 1);
++                   + sizeof (*h_addr_ptrs)
++                   + sizeof (*h_alias_ptr) + strlen (name) + 1);
+ 
+       if (buffer_size == NULL)
+         {
+         if (buflen < size_needed)
+           {
++            *status = NSS_STATUS_TRYAGAIN;
+             if (h_errnop != NULL)
+-              *h_errnop = TRY_AGAIN;
++              *h_errnop = NETDB_INTERNAL;
+             __set_errno (ERANGE);
+             goto done;
+           }
+@@ -109,7 +114,7 @@ __nss_hostname_digits_dots (const char *name, struct hostent *resbuf,
+             *buffer_size = 0;
+             __set_errno (save);
+             if (h_errnop != NULL)
+-              *h_errnop = TRY_AGAIN;
++              *h_errnop = NETDB_INTERNAL;
+             *result = NULL;
+             goto done;
+           }
+@@ -149,7 +154,9 @@ __nss_hostname_digits_dots (const char *name, struct hostent *resbuf,
+                 if (! ok)
+                   {
+                     *h_errnop = HOST_NOT_FOUND;
+-                    if (buffer_size)
++                    if (buffer_size == NULL)
++                      *status = NSS_STATUS_NOTFOUND;
++                    else
+                       *result = NULL;
+                     goto done;
+                   }
+@@ -190,7 +197,7 @@ __nss_hostname_digits_dots (const char *name, struct hostent *resbuf,
+                 if (buffer_size == NULL)
+                   *status = NSS_STATUS_SUCCESS;
+                 else
+-                 *result = resbuf;
++                  *result = resbuf;
+                 goto done;
+               }
+ 
+@@ -201,15 +208,6 @@ __nss_hostname_digits_dots (const char *name, struct hostent *resbuf,
+ 
+       if ((isxdigit (name[0]) && strchr (name, ':') != NULL) || name[0] == ':')
+       {
+-        const char *cp;
+-        char *hostname;
+-        typedef unsigned char host_addr_t[16];
+-        host_addr_t *host_addr;
+-        typedef char *host_addr_list_t[2];
+-        host_addr_list_t *h_addr_ptrs;
+-        size_t size_needed;
+-        int addr_size;
+-
+         switch (af)
+           {
+           default:
+@@ -225,7 +223,10 @@ __nss_hostname_digits_dots (const char *name, struct hostent *resbuf,
+             /* This is not possible.  We cannot represent an IPv6 address
+                in an `struct in_addr' variable.  */
+             *h_errnop = HOST_NOT_FOUND;
+-            *result = NULL;
++            if (buffer_size == NULL)
++              *status = NSS_STATUS_NOTFOUND;
++            else
++              *result = NULL;
+             goto done;
+ 
+           case AF_INET6:
+@@ -233,42 +234,6 @@ __nss_hostname_digits_dots (const char *name, struct hostent *resbuf,
+             break;
+           }
+ 
+-        size_needed = (sizeof (*host_addr)
+-                       + sizeof (*h_addr_ptrs) + strlen (name) + 1);
+-
+-        if (buffer_size == NULL && buflen < size_needed)
+-          {
+-            if (h_errnop != NULL)
+-              *h_errnop = TRY_AGAIN;
+-            __set_errno (ERANGE);
+-            goto done;
+-          }
+-        else if (buffer_size != NULL && *buffer_size < size_needed)
+-          {
+-            char *new_buf;
+-            *buffer_size = size_needed;
+-            new_buf = realloc (*buffer, *buffer_size);
+-
+-            if (new_buf == NULL)
+-              {
+-                save = errno;
+-                free (*buffer);
+-                __set_errno (save);
+-                *buffer = NULL;
+-                *buffer_size = 0;
+-                *result = NULL;
+-                goto done;
+-              }
+-            *buffer = new_buf;
+-          }
+-
+-        memset (*buffer, '\0', size_needed);
+-
+-        host_addr = (host_addr_t *) *buffer;
+-        h_addr_ptrs = (host_addr_list_t *)
+-          ((char *) host_addr + sizeof (*host_addr));
+-        hostname = (char *) h_addr_ptrs + sizeof (*h_addr_ptrs);
+-
+         for (cp = name;; ++cp)
+           {
+             if (!*cp)
+@@ -281,7 +246,9 @@ __nss_hostname_digits_dots (const char *name, struct hostent *resbuf,
+                 if (inet_pton (AF_INET6, name, host_addr) <= 0)
+                   {
+                     *h_errnop = HOST_NOT_FOUND;
+-                    if (buffer_size)
++                    if (buffer_size == NULL)
++                      *status = NSS_STATUS_NOTFOUND;
++                    else
+                       *result = NULL;
+                     goto done;
+                   }
+diff --git a/nss/getXXbyYY_r.c b/nss/getXXbyYY_r.c
+index 1067744..44d00f4 100644
+--- a/nss/getXXbyYY_r.c
++++ b/nss/getXXbyYY_r.c
+@@ -179,6 +179,9 @@ INTERNAL (REENTRANT_NAME) (ADD_PARAMS, LOOKUP_TYPE *resbuf, char *buffer,
+     case -1:
+       return errno;
+     case 1:
++#ifdef NEED_H_ERRNO
++      any_service = true;
++#endif
+       goto done;
+     }
+ #endif
+diff --git a/nss/test-digits-dots.c b/nss/test-digits-dots.c
+new file mode 100644
+index 0000000..1efa344
+--- /dev/null
++++ b/nss/test-digits-dots.c
+@@ -0,0 +1,38 @@
++/* Copyright (C) 2013 Free Software Foundation, Inc.
++   This file is part of the GNU C Library.
++
++   The GNU C Library is free software; you can redistribute it and/or
++   modify it under the terms of the GNU Lesser General Public
++   License as published by the Free Software Foundation; either
++   version 2.1 of the License, or (at your option) any later version.
++
++   The GNU C Library is distributed in the hope that it will be useful,
++   but WITHOUT ANY WARRANTY; without even the implied warranty of
++   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++   Lesser General Public License for more details.
++
++   You should have received a copy of the GNU Lesser General Public
++   License along with the GNU C Library; if not, see
++   <http://www.gnu.org/licenses/>.  */
++
++/* Testcase for BZ #15014 */
++
++#include <stdlib.h>
++#include <netdb.h>
++#include <errno.h>
++
++static int
++do_test (void)
++{
++  char buf[32];
++  struct hostent *result = NULL;
++  struct hostent ret;
++  int h_err = 0;
++  int err;
++
++  err = gethostbyname_r ("1.2.3.4", &ret, buf, sizeof (buf), &result, &h_err);
++  return err == ERANGE && h_err == NETDB_INTERNAL ? EXIT_SUCCESS : EXIT_FAILURE;
++}
++
++#define TEST_FUNCTION do_test ()
++#include "../test-skeleton.c"

diff --git a/src/patches/glibc/glibc-rh995972.patch b/src/patches/glibc/glibc-rh995972.patch
new file mode 100644 (file)
index 0000000..0178bca
--- /dev/null
+++ b/src/patches/glibc/glibc-rh995972.patch
@@ -0,0 +1,246 @@
+commit d26dfc60edc8c6dd160eefff16a734152a835ca0
+Author: Martin von Gagern <Martin.vGagern@gmx.net>
+Date:   Sat May 14 21:25:43 2011 -0400
+
+    Fix handling of static TLS in dlopen'ed objects
+    
+    When dynamically loading a library along with several dependencies, calls to
+    _dl_add_to_slotinfo and _dl_update_slotinfo can become intermixed. As a
+    consequence, _dl_update_slotinfo will update the generation counter of the dtv
+    although not all of the slots belonging to that generation have been added.
+    Subsequent calls to _dl_add_to_slotinfo will add more slots to the same
+    generation, for which no storage will be allocated, as the dtv generation
+    checks will claim no work is necessary. This will lead to uninitialized dtv
+    entries and will likely cause a SIGSEGV when thread local variables are
+    accessed.
+
+diff --git a/elf/Makefile b/elf/Makefile
+index 8d9657d..6efb86c 100644
+--- a/elf/Makefile
++++ b/elf/Makefile
+@@ -76,6 +76,7 @@ distribute   := rtld-Rules \
+                  tst-tlsmod12.c tst-tls10.h tst-alignmod.c tst-alignmod2.c \
+                  circlemod1.c circlemod1a.c circlemod2.c circlemod2a.c \
+                  circlemod3.c circlemod3a.c nodlopenmod2.c \
++                 tst-tls19mod1.c tst-tls19mod2.c tst-tls19mod3.c \
+                  tls-macros.h \
+                  reldep8mod1.c reldep8mod2.c reldep8mod3.c \
+                  nodel2mod1.c nodel2mod2.c nodel2mod3.c \
+@@ -194,7 +195,7 @@ tests += loadtest restest1 preloadtest loadfail multiload origtest resolvfail \
+        restest2 next dblload dblunload reldep5 reldep6 reldep7 reldep8 \
+        circleload1 tst-tls3 tst-tls4 tst-tls5 tst-tls6 tst-tls7 tst-tls8 \
+        tst-tls10 tst-tls11 tst-tls12 tst-tls13 tst-tls14 tst-tls15 \
+-       tst-tls16 tst-tls17 tst-tls18 tst-tls-dlinfo \
++       tst-tls16 tst-tls17 tst-tls18 tst-tls19 tst-tls-dlinfo \
+        tst-align tst-align2 $(tests-execstack-$(have-z-execstack)) \
+        tst-dlmodcount tst-dlopenrpath tst-deep1 \
+        tst-dlmopen1 tst-dlmopen2 tst-dlmopen3 \
+@@ -240,6 +241,7 @@ modules-names = testobj1 testobj2 testobj3 testobj4 testobj5 testobj6 \
+               $(patsubst %,tst-tlsmod17a%,$(tlsmod17a-suffixes)) \
+               tst-tlsmod17b \
+               $(patsubst %,tst-tlsmod18a%,$(tlsmod18a-suffixes)) \
++              tst-tls19mod1 tst-tls19mod2 tst-tls19mod3 \
+               circlemod1 circlemod1a circlemod2 circlemod2a \
+               circlemod3 circlemod3a \
+               reldep8mod1 reldep8mod2 reldep8mod3 \
+@@ -525,6 +527,8 @@ $(objpfx)tst-tlsmod13a.so: $(objpfx)tst-tlsmod13.so
+ # For tst-tls9-static, make sure the modules it dlopens have libc.so in DT_NEEDED
+ $(objpfx)tst-tlsmod5.so: $(common-objpfx)libc.so
+ $(objpfx)tst-tlsmod6.so: $(common-objpfx)libc.so
++$(objpfx)tst-tls19mod1.so: $(objpfx)tst-tls19mod2.so $(objpfx)tst-tls19mod3.so
++$(objpfx)tst-tls19mod3.so: $(objpfx)ld.so
+ $(objpfx)reldep8mod3.so: $(objpfx)reldep8mod1.so $(objpfx)reldep8mod2.so
+ $(objpfx)nodel2mod3.so: $(objpfx)nodel2mod1.so $(objpfx)nodel2mod2.so
+ $(objpfx)reldep9mod2.so: $(objpfx)reldep9mod1.so
+@@ -822,6 +826,9 @@ $(patsubst %,$(objpfx)%.os,$(tlsmod18a-modules)): $(objpfx)tst-tlsmod18a%.os : t
+       $(CC) $(CFLAGS) $(CPPFLAGS) -c -o $@ -DN=$* -DNOT_IN_libc=1 $<
+ $(patsubst %,$(objpfx)tst-tlsmod18a%.so,$(tlsmod18a-suffixes)): $(objpfx)tst-tlsmod18a%.so: $(objpfx)ld.so
+ 
++$(objpfx)tst-tls19: $(libdl)
++$(objpfx)tst-tls19.out: $(objpfx)tst-tls19mod1.so
++
+ CFLAGS-tst-align.c = $(stack-align-test-flags)
+ CFLAGS-tst-align2.c = $(stack-align-test-flags)
+ CFLAGS-tst-alignmod.c = $(stack-align-test-flags)
+diff --git a/elf/dl-open.c b/elf/dl-open.c
+index cf8e8cc..8d90b56 100644
+--- a/elf/dl-open.c
++++ b/elf/dl-open.c
+@@ -347,6 +347,7 @@ dl_open_worker (void *a)
+   /* If the file is not loaded now as a dependency, add the search
+      list of the newly loaded object to the scope.  */
+   bool any_tls = false;
++  unsigned int first_static_tls = new->l_searchlist.r_nlist;
+   for (unsigned int i = 0; i < new->l_searchlist.r_nlist; ++i)
+     {
+       struct link_map *imap = new->l_searchlist.r_list[i];
+@@ -425,30 +426,9 @@ dl_open_worker (void *a)
+            might have to increase its size.  */
+         _dl_add_to_slotinfo (imap);
+ 
+-        if (imap->l_need_tls_init)
+-          {
+-            /* For static TLS we have to allocate the memory here
+-               and now.  This includes allocating memory in the DTV.
+-               But we cannot change any DTV other than our own. So,
+-               if we cannot guarantee that there is room in the DTV
+-               we don't even try it and fail the load.
+-
+-               XXX We could track the minimum DTV slots allocated in
+-               all threads.  */
+-            if (! RTLD_SINGLE_THREAD_P && imap->l_tls_modid > DTV_SURPLUS)
+-              _dl_signal_error (0, "dlopen", NULL, N_("\
+-cannot load any more object with static TLS"));
+-
+-            imap->l_need_tls_init = 0;
+-#ifdef SHARED
+-            /* Update the slot information data for at least the
+-               generation of the DSO we are allocating data for.  */
+-            _dl_update_slotinfo (imap->l_tls_modid);
+-#endif
+-
+-            GL(dl_init_static_tls) (imap);
+-            assert (imap->l_need_tls_init == 0);
+-          }
++        if (imap->l_need_tls_init
++            && first_static_tls == new->l_searchlist.r_nlist)
++          first_static_tls = i;
+ 
+         /* We have to bump the generation counter.  */
+         any_tls = true;
+@@ -460,6 +440,40 @@ cannot load any more object with static TLS"));
+     _dl_fatal_printf (N_("\
+ TLS generation counter wrapped!  Please report this."));
+ 
++  /* We need a second pass for static tls data, because _dl_update_slotinfo
++     must not be run while calls to _dl_add_to_slotinfo are still pending. */
++  for (unsigned int i = first_static_tls; i < new->l_searchlist.r_nlist; ++i)
++    {
++      struct link_map *imap = new->l_searchlist.r_list[i];
++
++      if (imap->l_need_tls_init
++        && ! imap->l_init_called
++        && imap->l_tls_blocksize > 0)
++      {
++        /* For static TLS we have to allocate the memory here and
++           now.  This includes allocating memory in the DTV.  But we
++           cannot change any DTV other than our own. So, if we
++           cannot guarantee that there is room in the DTV we don't
++           even try it and fail the load.
++
++           XXX We could track the minimum DTV slots allocated in
++           all threads.  */
++        if (! RTLD_SINGLE_THREAD_P && imap->l_tls_modid > DTV_SURPLUS)
++          _dl_signal_error (0, "dlopen", NULL, N_("\
++cannot load any more object with static TLS"));
++
++        imap->l_need_tls_init = 0;
++#ifdef SHARED
++        /* Update the slot information data for at least the
++           generation of the DSO we are allocating data for.  */
++        _dl_update_slotinfo (imap->l_tls_modid);
++#endif
++
++        GL(dl_init_static_tls) (imap);
++        assert (imap->l_need_tls_init == 0);
++      }
++    }
++
+   /* Notify the debugger all new objects have been relocated.  */
+   if (relocation_in_progress)
+     LIBC_PROBE (rtld_reloc_complete, 3, args->nsid, r, new);
+diff --git a/elf/tst-tls19.c b/elf/tst-tls19.c
+new file mode 100644
+index 0000000..acbc1d6
+--- /dev/null
++++ b/elf/tst-tls19.c
+@@ -0,0 +1,27 @@
++// BZ 12453
++#include <stdio.h>
++#include <dlfcn.h>
++
++
++static int
++do_test (void)
++{
++  void* dl = dlopen ("tst-tls19mod1.so", RTLD_LAZY | RTLD_GLOBAL);
++  if (dl == NULL)
++    {
++      printf ("Error loading tst-tls19mod1.so: %s\n", dlerror ());
++      return 1;
++    }
++
++  int (*fn) (void) = dlsym (dl, "foo");
++  if (fn == NULL)
++    {
++      printf("Error obtaining symbol foo\n");
++      return 1;
++    }
++
++  return fn ();
++}
++
++#define TEST_FUNCTION do_test ()
++#include "../test-skeleton.c"
+diff --git a/elf/tst-tls19mod1.c b/elf/tst-tls19mod1.c
+new file mode 100644
+index 0000000..2790097
+--- /dev/null
++++ b/elf/tst-tls19mod1.c
+@@ -0,0 +1,15 @@
++#include <stdio.h>
++
++extern int bar (void);
++extern int baz (void);
++
++int
++foo (void)
++{
++  int v1 = bar ();
++  int v2 = baz ();
++
++  printf ("bar=%d, baz=%d\n", v1, v2);
++
++  return v1 != 666 || v2 != 42;
++}
+diff --git a/elf/tst-tls19mod2.c b/elf/tst-tls19mod2.c
+new file mode 100644
+index 0000000..cae702f
+--- /dev/null
++++ b/elf/tst-tls19mod2.c
+@@ -0,0 +1,13 @@
++static int __thread tbar __attribute__ ((tls_model ("initial-exec"))) = 666;
++
++void
++setter (int a)
++{
++  tbar = a;
++}
++
++int
++bar (void)
++{
++  return tbar;
++}
+diff --git a/elf/tst-tls19mod3.c b/elf/tst-tls19mod3.c
+new file mode 100644
+index 0000000..e7b2801
+--- /dev/null
++++ b/elf/tst-tls19mod3.c
+@@ -0,0 +1,16 @@
++#include <stdio.h>
++
++static int __thread tbaz __attribute__ ((tls_model ("local-dynamic"))) = 42;
++
++void
++setter2 (int a)
++{
++  tbaz = a;
++}
++
++int
++baz (void)
++{
++  printf ("&tbaz=%p\n", &tbaz);
++  return tbaz;
++}

diff --git a/src/patches/linux-3.14.25-rt5592_no_special_txop_init.patch b/src/patches/linux-3.14.25-rt5592_no_special_txop_init.patch
new file mode 100644 (file)
index 0000000..fe30c9e
--- /dev/null
+++ b/src/patches/linux-3.14.25-rt5592_no_special_txop_init.patch
@@ -0,0 +1,13 @@
+diff -Naur linux-3.14.25.org/drivers/net/wireless/rt2x00/rt2800lib.c linux-3.14.25/drivers/net/wireless/rt2x00/rt2800lib.c
+--- linux-3.14.25.org/drivers/net/wireless/rt2x00/rt2800lib.c  2014-11-21 18:23:44.000000000 +0100
++++ linux-3.14.25/drivers/net/wireless/rt2x00/rt2800lib.c      2014-12-03 11:30:58.813355413 +0100
+@@ -4847,7 +4847,8 @@
+       rt2x00_set_field32(&reg, TXOP_CTRL_CFG_EXT_CWMIN, 0);
+       rt2800_register_write(rt2x00dev, TXOP_CTRL_CFG, reg);
+ 
+-      reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002;
++//    reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002;
++      reg = 0x00000002;
+       rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg);
+ 
+       rt2800_register_read(rt2x00dev, TX_RTS_CFG, &reg);

diff --git a/src/patches/linux-3.14.25_rt2x00_fix_bss_bcn_num.patch b/src/patches/linux-3.14.25_rt2x00_fix_bss_bcn_num.patch
new file mode 100644 (file)
index 0000000..87ea39a
--- /dev/null
+++ b/src/patches/linux-3.14.25_rt2x00_fix_bss_bcn_num.patch
@@ -0,0 +1,12 @@
+diff -Naur linux-3.14.25.org/drivers/net/wireless/rt2x00/rt2800lib.c linux-3.14.25/drivers/net/wireless/rt2x00/rt2800lib.c
+--- linux-3.14.25.org/drivers/net/wireless/rt2x00/rt2800lib.c  2014-12-03 11:30:58.000000000 +0100
++++ linux-3.14.25/drivers/net/wireless/rt2x00/rt2800lib.c      2014-12-03 12:15:45.743454351 +0100
+@@ -1557,7 +1557,7 @@
+               if (!is_zero_ether_addr((const u8 *)conf->bssid)) {
+                       reg = le32_to_cpu(conf->bssid[1]);
+                       rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 3);
+-                      rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 7);
++                      rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
+                       conf->bssid[1] = cpu_to_le32(reg);
+               }
+ 

diff --git a/src/patches/linux-3.14.32-r8169_disable_L23.patch b/src/patches/linux-3.14.32-r8169_disable_L23.patch
new file mode 100644 (file)
index 0000000..dbb58d6
--- /dev/null
+++ b/src/patches/linux-3.14.32-r8169_disable_L23.patch
@@ -0,0 +1,100 @@
+From 77e3b7f055f824e4d6587faa73bd4aacd0c307e8 Mon Sep 17 00:00:00 2001
+From: hayeswang <hayeswang@realtek.com>
+Date: Wed, 9 Jul 2014 14:52:51 +0800
+Subject: [PATCH] r8169: disable L23
+
+For RTL8411, RTL8111G, RTL8402, RTL8105, and RTL8106, disable the feature
+of entering the L2/L3 link state of the PCIe. When the nic starts the process
+of entering the L2/L3 link state and the PCI reset occurs before the work
+is finished, the work would be queued and continue after the next the PCI
+reset occurs. This causes the device stays in L2/L3 link state, and the system
+couldn't find the device.
+
+Signed-off-by: Hayes Wang <hayeswang@realtek.com>
+Acked-by: Francois Romieu <romieu@fr.zoreil.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/realtek/r8169.c | 25 +++++++++++++++++++++++++
+ 1 file changed, 25 insertions(+)
+
+diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
+index 3ff7bc3..b94f658 100644
+--- a/drivers/net/ethernet/realtek/r8169.c
++++ b/drivers/net/ethernet/realtek/r8169.c
+@@ -538,6 +538,7 @@ enum rtl_register_content {
+       MagicPacket     = (1 << 5),     /* Wake up when receives a Magic Packet */
+       LinkUp          = (1 << 4),     /* Wake up when the cable connection is re-established */
+       Jumbo_En0       = (1 << 2),     /* 8168 only. Reserved in the 8168b */
++      Rdy_to_L23      = (1 << 1),     /* L23 Enable */
+       Beacon_en       = (1 << 0),     /* 8168 only. Reserved in the 8168b */
+ 
+       /* Config4 register */
+@@ -4897,6 +4898,21 @@ static void rtl_enable_clock_request(struct pci_dev *pdev)
+                                PCI_EXP_LNKCTL_CLKREQ_EN);
+ }
+ 
++static void rtl_pcie_state_l2l3_enable(struct rtl8169_private *tp, bool enable)
++{
++      void __iomem *ioaddr = tp->mmio_addr;
++      u8 data;
++
++      data = RTL_R8(Config3);
++
++      if (enable)
++              data |= Rdy_to_L23;
++      else
++              data &= ~Rdy_to_L23;
++
++      RTL_W8(Config3, data);
++}
++
+ #define R8168_CPCMD_QUIRK_MASK (\
+       EnableBist | \
+       Mac_dbgo_oe | \
+@@ -5246,6 +5262,7 @@ static void rtl_hw_start_8411(struct rtl8169_private *tp)
+       };
+ 
+       rtl_hw_start_8168f(tp);
++      rtl_pcie_state_l2l3_enable(tp, false);
+ 
+       rtl_ephy_init(tp, e_info_8168f_1, ARRAY_SIZE(e_info_8168f_1));
+ 
+@@ -5284,6 +5301,8 @@ static void rtl_hw_start_8168g_1(struct rtl8169_private *tp)
+ 
+       rtl_w1w0_eri(tp, 0x2fc, ERIAR_MASK_0001, 0x01, 0x06, ERIAR_EXGMAC);
+       rtl_w1w0_eri(tp, 0x1b0, ERIAR_MASK_0011, 0x0000, 0x1000, ERIAR_EXGMAC);
++
++      rtl_pcie_state_l2l3_enable(tp, false);
+ }
+ 
+ static void rtl_hw_start_8168g_2(struct rtl8169_private *tp)
+@@ -5536,6 +5555,8 @@ static void rtl_hw_start_8105e_1(struct rtl8169_private *tp)
+       RTL_W8(DLLPR, RTL_R8(DLLPR) | PFM_EN);
+ 
+       rtl_ephy_init(tp, e_info_8105e_1, ARRAY_SIZE(e_info_8105e_1));
++
++      rtl_pcie_state_l2l3_enable(tp, false);
+ }
+ 
+ static void rtl_hw_start_8105e_2(struct rtl8169_private *tp)
+@@ -5571,6 +5592,8 @@ static void rtl_hw_start_8402(struct rtl8169_private *tp)
+       rtl_eri_write(tp, 0xc0, ERIAR_MASK_0011, 0x0000, ERIAR_EXGMAC);
+       rtl_eri_write(tp, 0xb8, ERIAR_MASK_0011, 0x0000, ERIAR_EXGMAC);
+       rtl_w1w0_eri(tp, 0x0d4, ERIAR_MASK_0011, 0x0e00, 0xff00, ERIAR_EXGMAC);
++
++      rtl_pcie_state_l2l3_enable(tp, false);
+ }
+ 
+ static void rtl_hw_start_8106(struct rtl8169_private *tp)
+@@ -5583,6 +5606,8 @@ static void rtl_hw_start_8106(struct rtl8169_private *tp)
+       RTL_W32(MISC, (RTL_R32(MISC) | DISABLE_LAN_EN) & ~EARLY_TALLY_EN);
+       RTL_W8(MCU, RTL_R8(MCU) | EN_NDP | EN_OOB_RESET);
+       RTL_W8(DLLPR, RTL_R8(DLLPR) & ~PFM_EN);
++
++      rtl_pcie_state_l2l3_enable(tp, false);
+ }
+ 
+ static void rtl_hw_start_8101(struct net_device *dev)
+-- 
+1.8.5.2
+

diff --git a/src/patches/linux-3.14.x-update_banana_dts.patch b/src/patches/linux-3.14.x-update_banana_dts.patch
new file mode 100644 (file)
index 0000000..309416b
--- /dev/null
+++ b/src/patches/linux-3.14.x-update_banana_dts.patch
@@ -0,0 +1,301 @@
+diff -Naur linux-3.14.30.org/arch/arm/boot/dts/Makefile linux-3.14.30/arch/arm/boot/dts/Makefile
+--- linux-3.14.30.org/arch/arm/boot/dts/Makefile       2015-01-29 19:56:17.000000000 +0100
++++ linux-3.14.30/arch/arm/boot/dts/Makefile   2015-01-29 20:41:06.598335182 +0100
+@@ -304,6 +304,7 @@
+       sun5i-a13-olinuxino-micro.dtb \
+       sun6i-a31-colombus.dtb \
+       sun7i-a20-bananapi.dtb \
++      sun7i-a20-bananapro.dtb \
+       sun7i-a20-cubieboard2.dtb \
+       sun7i-a20-cubietruck.dtb \
+       sun7i-a20-lamobo-r1.dtb \
+diff -Naur linux-3.14.30.org/arch/arm/boot/dts/sun7i-a20-bananapi.dts linux-3.14.30/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+--- linux-3.14.30.org/arch/arm/boot/dts/sun7i-a20-bananapi.dts 2015-01-29 19:56:17.000000000 +0100
++++ linux-3.14.30/arch/arm/boot/dts/sun7i-a20-bananapi.dts     2015-01-29 20:33:18.143334959 +0100
+@@ -199,7 +199,7 @@
+                       regulator-name = "gmac-3v3";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+-                      startup-delay-us = <50000>;
++                      startup-delay-us = <100000>;
+                       enable-active-high;
+                       gpio = <&pio 7 23 0>;
+                       status = "okay";
+diff -Naur linux-3.14.30.org/arch/arm/boot/dts/sun7i-a20-bananapro.dts linux-3.14.30/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+--- linux-3.14.30.org/arch/arm/boot/dts/sun7i-a20-bananapro.dts        1970-01-01 01:00:00.000000000 +0100
++++ linux-3.14.30/arch/arm/boot/dts/sun7i-a20-bananapro.dts    2015-01-29 20:40:45.153335172 +0100
+@@ -0,0 +1,262 @@
++/*
++ * Copyright 2015 Arne Fitzenreiter
++ * Arne Fitzenreiter <arne_f@ipfire.org>
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/dts-v1/;
++/include/ "sun7i-a20.dtsi"
++/include/ "sunxi-common-regulators.dtsi"
++#include <dt-bindings/input/input.h>
++
++/ {
++      model = "LeMaker Banana Pro";
++      compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
++
++      aliases {
++              spi0 = &spi1;
++              spi1 = &spi2;
++      };
++
++      soc@01c00000 {
++              spi1: spi@01c06000 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&spi1_pins_a>;
++                      status = "okay";
++              };
++
++              spi2: spi@01c17000 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&spi2_pins_a>;
++                      status = "okay";
++              };
++
++              mmc0: mmc@01c0f000 {
++                      pinctrl-names = "default", "default";
++                      pinctrl-0 = <&mmc0_pins_a>;
++                      pinctrl-1 = <&mmc0_cd_pin_bananapi>;
++                      cd-gpios = <&pio 7 10 0>; /* PH10 */
++                      status = "okay";
++              };
++
++              mmc3: mmc@01c12000 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&mmc3_pins_a>;
++                      vmmc-supply = <&reg_vmmc3>;
++                      bus-width = <4>;
++                      non-removable;
++                      status = "okay";
++              };
++
++              usbphy: phy@01c13400 {
++                      usb1_vbus-supply = <&reg_usb1_vbus>;
++                      usb2_vbus-supply = <&reg_usb2_vbus>;
++                      status = "okay";
++              };
++
++              ehci0: usb@01c14000 {
++                      status = "okay";
++              };
++
++              ohci0: usb@01c14400 {
++                      status = "okay";
++              };
++
++              ahci: sata@01c18000 {
++                      target-supply = <&reg_ahci_5v>;
++                      status = "okay";
++              };
++
++              ehci1: usb@01c1c000 {
++                      status = "okay";
++              };
++
++              ohci1: usb@01c1c400 {
++                      status = "okay";
++              };
++
++              pinctrl@01c20800 {
++                      usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
++                              allwinner,pins = "PH0";
++                              allwinner,function = "gpio_out";
++                              allwinner,drive = <0>;
++                              allwinner,pull = <0>;
++                      };
++
++                      usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
++                              allwinner,pins = "PH1";
++                              allwinner,function = "gpio_out";
++                              allwinner,drive = <0>;
++                              allwinner,pull = <0>;
++                      };
++
++                      led_pins_bananapi: led_pins@0 {
++                              allwinner,pins = "PH24", "PG2";
++                              allwinner,function = "gpio_out";
++                              allwinner,drive = <0>;
++                              allwinner,pull = <0>;
++                      };
++
++                      mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
++                              allwinner,pins = "PH10";
++                              allwinner,function = "gpio_in";
++                              allwinner,drive = <0>;
++                              allwinner,pull = <1>;
++                      };
++ 
++                      vmmc3_pin_bananapro: vmmc3_pin@0 {
++                              allwinner,pins = "PH22";
++                              allwinner,function = "gpio_out";
++                              allwinner,drive = <0>;
++                              allwinner,pull = <0>;
++                      };
++
++                      gmac_power_pin_bananapi: gmac_power_pin@0 {
++                              allwinner,pins = "PH23";
++                              allwinner,function = "gpio_out";
++                              allwinner,drive = <0>;
++                              allwinner,pull = <0>;
++                      };
++              };
++
++              lradc: lradc@01c22800 {
++                      allwinner,chan0-step = <200>;
++                      linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN
++                                              KEY_MENU KEY_SEARCH KEY_HOME
++                                              KEY_ESC KEY_ENTER>;
++                      status = "okay";
++              };
++
++              ir0: ir@01c21800 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&ir0_pins_a>;
++                      status = "okay";
++              };
++
++              uart0: serial@01c28000 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&uart0_pins_a>;
++                      status = "okay";
++              };
++
++              uart2: serial@01c28800 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&uart2_pins_a>;
++                      status = "okay";
++              };
++
++              uart6: serial@01c29800 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&uart6_pins_a>;
++                      status = "okay";
++              };
++
++              uart7: serial@01c29c00 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&uart7_pins_a>;
++                      status = "okay";
++              };
++
++              i2c0: i2c@01c2ac00 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&i2c0_pins_a>;
++                      status = "okay";
++
++                      axp: axp20x@34 {
++                              reg = <0x34>;
++                              interrupt-parent = <&nmi_intc>;
++                              interrupts = <0 8>;
++                              axp,system-power-controller;
++                              /include/ "x-powers-axp209.dtsi"
++                      };
++              };
++
++              i2c1: i2c@01c2b000 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&i2c1_pins_a>;
++                      status = "okay";
++              };
++
++              i2c2: i2c@01c2b400 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&i2c2_pins_a>;
++                      status = "okay";
++              };
++
++              gmac: ethernet@01c50000 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&gmac_pins_rgmii_a>;
++                      phy = <&phy1>;
++                      phy-mode = "rgmii";
++                      phy-supply = <&reg_gmac_3v3>;
++                      status = "okay";
++
++                      phy1: ethernet-phy@1 {
++                              reg = <1>;
++                      };
++              };
++      };
++
++      leds {
++              compatible = "gpio-leds";
++              pinctrl-names = "default";
++              pinctrl-0 = <&led_pins_bananapi>;
++
++              green {
++                      label = "bananapi:green:usr";
++                      gpios = <&pio 7 24 0>;
++                      linux,default-trigger = "heartbeat";
++              };
++              blue {
++                      label = "bananapi:blue:usr";
++                      gpios = <&pio 6 2 0>;
++                      linux,default-trigger = "mmc0";
++              };
++      };
++
++        reg_ahci_5v: ahci-5v {
++                status = "okay";
++        };
++
++        reg_usb1_vbus: usb1-vbus {
++              pinctrl-0 = <&usb1_vbus_pin_bananapro>;
++              gpio = <&pio 7 0 0>; /* PH0 */
++                status = "okay";
++        };
++
++        reg_usb2_vbus: usb2-vbus {
++              pinctrl-0 = <&usb2_vbus_pin_bananapro>;
++              gpio = <&pio 7 1 0>; /* PH1 */
++                status = "okay";
++        };
++
++      reg_gmac_3v3: gmac-3v3 {
++                      compatible = "regulator-fixed";
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&gmac_power_pin_bananapi>;
++                      regulator-name = "gmac-3v3";
++                      regulator-min-microvolt = <3300000>;
++                      regulator-max-microvolt = <3300000>;
++                      startup-delay-us = <100000>;
++                      enable-active-high;
++                      gpio = <&pio 7 23 0>;
++                      status = "okay";
++      };
++
++      reg_vmmc3: vmmc3 {
++              compatible = "regulator-fixed";
++              pinctrl-names = "default";
++              pinctrl-0 = <&vmmc3_pin_bananapro>;
++              regulator-name = "vmmc3";
++              regulator-min-microvolt = <3300000>;
++              regulator-max-microvolt = <3300000>;
++              enable-active-high;
++              gpio = <&pio 7 22 0>;
++      };
++};
+diff -Naur linux-3.14.30.org/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts linux-3.14.30/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+--- linux-3.14.30.org/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts        2015-01-29 19:56:17.000000000 +0100
++++ linux-3.14.30/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts    2015-01-30 00:00:01.678340873 +0100
+@@ -199,7 +199,7 @@
+                       regulator-name = "gmac-3v3";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+-                      startup-delay-us = <50000>;
++                      startup-delay-us = <100000>;
+                       enable-active-high;
+                       gpio = <&pio 7 23 0>;
+                       status = "okay";

diff --git a/src/patches/strongswan-5.1.2-5.2.1_modp_custom.patch b/src/patches/strongswan-5.1.2-5.2.1_modp_custom.patch
new file mode 100644 (file)
index 0000000..df2cb09
--- /dev/null
+++ b/src/patches/strongswan-5.1.2-5.2.1_modp_custom.patch
@@ -0,0 +1,164 @@
+From a78ecdd47509626711a13481f53696e01d4b8c62 Mon Sep 17 00:00:00 2001
+From: Tobias Brunner <tobias@strongswan.org>
+Date: Mon, 1 Dec 2014 17:21:59 +0100
+Subject: [PATCH] crypto: Define MODP_CUSTOM outside of IKE DH range
+
+Before this fix it was possible to crash charon with an IKE_SA_INIT
+message containing a KE payload with DH group MODP_CUSTOM(1025).
+Defining MODP_CUSTOM outside of the two byte IKE DH identifier range
+prevents it from getting negotiated.
+
+Fixes CVE-2014-9221 in version 5.1.2 and newer.
+---
+ src/charon-tkm/src/tkm/tkm_diffie_hellman.c                   |  2 +-
+ src/libstrongswan/crypto/diffie_hellman.c                     | 11 ++++++-----
+ src/libstrongswan/crypto/diffie_hellman.h                     |  6 ++++--
+ src/libstrongswan/plugins/gcrypt/gcrypt_dh.c                  |  2 +-
+ src/libstrongswan/plugins/gmp/gmp_diffie_hellman.c            |  2 +-
+ src/libstrongswan/plugins/ntru/ntru_ke.c                      |  2 +-
+ src/libstrongswan/plugins/openssl/openssl_diffie_hellman.c    |  2 +-
+ src/libstrongswan/plugins/openssl/openssl_ec_diffie_hellman.c |  2 +-
+ src/libstrongswan/plugins/pkcs11/pkcs11_dh.c                  |  2 +-
+ 9 files changed, 17 insertions(+), 14 deletions(-)
+
+diff --git a/src/charon-tkm/src/tkm/tkm_diffie_hellman.c b/src/charon-tkm/src/tkm/tkm_diffie_hellman.c
+index 67db5e6d87d6..836e0b7f088d 100644
+--- a/src/charon-tkm/src/tkm/tkm_diffie_hellman.c
++++ b/src/charon-tkm/src/tkm/tkm_diffie_hellman.c
+@@ -41,7 +41,7 @@ struct private_tkm_diffie_hellman_t {
+       /**
+        * Diffie Hellman group number.
+        */
+-      u_int16_t group;
++      diffie_hellman_group_t group;
+ 
+       /**
+        * Diffie Hellman public value.
+diff --git a/src/libstrongswan/crypto/diffie_hellman.c b/src/libstrongswan/crypto/diffie_hellman.c
+index bada1c529951..ac106e9c4d45 100644
+--- a/src/libstrongswan/crypto/diffie_hellman.c
++++ b/src/libstrongswan/crypto/diffie_hellman.c
+@@ -42,15 +42,16 @@ ENUM_NEXT(diffie_hellman_group_names, MODP_1024_160, ECP_512_BP, ECP_521_BIT,
+       "ECP_256_BP",
+       "ECP_384_BP",
+       "ECP_512_BP");
+-ENUM_NEXT(diffie_hellman_group_names, MODP_NULL, MODP_CUSTOM, ECP_512_BP,
+-      "MODP_NULL",
+-      "MODP_CUSTOM");
+-ENUM_NEXT(diffie_hellman_group_names, NTRU_112_BIT, NTRU_256_BIT, MODP_CUSTOM,
++ENUM_NEXT(diffie_hellman_group_names, MODP_NULL, MODP_NULL, ECP_512_BP,
++      "MODP_NULL");
++ENUM_NEXT(diffie_hellman_group_names, NTRU_112_BIT, NTRU_256_BIT, MODP_NULL,
+       "NTRU_112",
+       "NTRU_128",
+       "NTRU_192",
+       "NTRU_256");
+-ENUM_END(diffie_hellman_group_names, NTRU_256_BIT);
++ENUM_NEXT(diffie_hellman_group_names, MODP_CUSTOM, MODP_CUSTOM, NTRU_256_BIT,
++      "MODP_CUSTOM");
++ENUM_END(diffie_hellman_group_names, MODP_CUSTOM);
+ 
+ 
+ /**
+diff --git a/src/libstrongswan/crypto/diffie_hellman.h b/src/libstrongswan/crypto/diffie_hellman.h
+index 105db22f14d4..d5161d077bb2 100644
+--- a/src/libstrongswan/crypto/diffie_hellman.h
++++ b/src/libstrongswan/crypto/diffie_hellman.h
+@@ -63,12 +63,14 @@ enum diffie_hellman_group_t {
+       /** insecure NULL diffie hellman group for testing, in PRIVATE USE */
+       MODP_NULL = 1024,
+       /** MODP group with custom generator/prime */
+-      MODP_CUSTOM = 1025,
+       /** Parameters defined by IEEE 1363.1, in PRIVATE USE */
+       NTRU_112_BIT = 1030,
+       NTRU_128_BIT = 1031,
+       NTRU_192_BIT = 1032,
+-      NTRU_256_BIT = 1033
++      NTRU_256_BIT = 1033,
++      /** internally used DH group with additional parameters g and p, outside
++       * of PRIVATE USE (i.e. IKEv2 DH group range) so it can't be negotiated */
++      MODP_CUSTOM = 65536,
+ };
+ 
+ /**
+diff --git a/src/libstrongswan/plugins/gcrypt/gcrypt_dh.c b/src/libstrongswan/plugins/gcrypt/gcrypt_dh.c
+index f418b941db86..299865da2e09 100644
+--- a/src/libstrongswan/plugins/gcrypt/gcrypt_dh.c
++++ b/src/libstrongswan/plugins/gcrypt/gcrypt_dh.c
+@@ -35,7 +35,7 @@ struct private_gcrypt_dh_t {
+       /**
+        * Diffie Hellman group number
+        */
+-      u_int16_t group;
++      diffie_hellman_group_t group;
+ 
+       /*
+        * Generator value
+diff --git a/src/libstrongswan/plugins/gmp/gmp_diffie_hellman.c b/src/libstrongswan/plugins/gmp/gmp_diffie_hellman.c
+index b74d35169f44..9936f7e4518f 100644
+--- a/src/libstrongswan/plugins/gmp/gmp_diffie_hellman.c
++++ b/src/libstrongswan/plugins/gmp/gmp_diffie_hellman.c
+@@ -42,7 +42,7 @@ struct private_gmp_diffie_hellman_t {
+       /**
+        * Diffie Hellman group number.
+        */
+-      u_int16_t group;
++      diffie_hellman_group_t group;
+ 
+       /*
+        * Generator value.
+diff --git a/src/libstrongswan/plugins/ntru/ntru_ke.c b/src/libstrongswan/plugins/ntru/ntru_ke.c
+index abaa22336221..e64f32b91d0e 100644
+--- a/src/libstrongswan/plugins/ntru/ntru_ke.c
++++ b/src/libstrongswan/plugins/ntru/ntru_ke.c
+@@ -56,7 +56,7 @@ struct private_ntru_ke_t {
+       /**
+        * Diffie Hellman group number.
+        */
+-      u_int16_t group;
++      diffie_hellman_group_t group;
+ 
+       /**
+        * NTRU Parameter Set
+diff --git a/src/libstrongswan/plugins/openssl/openssl_diffie_hellman.c b/src/libstrongswan/plugins/openssl/openssl_diffie_hellman.c
+index ff3382473666..1e68ac59b838 100644
+--- a/src/libstrongswan/plugins/openssl/openssl_diffie_hellman.c
++++ b/src/libstrongswan/plugins/openssl/openssl_diffie_hellman.c
+@@ -38,7 +38,7 @@ struct private_openssl_diffie_hellman_t {
+       /**
+        * Diffie Hellman group number.
+        */
+-      u_int16_t group;
++      diffie_hellman_group_t group;
+ 
+       /**
+        * Diffie Hellman object
+diff --git a/src/libstrongswan/plugins/openssl/openssl_ec_diffie_hellman.c b/src/libstrongswan/plugins/openssl/openssl_ec_diffie_hellman.c
+index b487d59a59a3..50853d6f0bde 100644
+--- a/src/libstrongswan/plugins/openssl/openssl_ec_diffie_hellman.c
++++ b/src/libstrongswan/plugins/openssl/openssl_ec_diffie_hellman.c
+@@ -40,7 +40,7 @@ struct private_openssl_ec_diffie_hellman_t {
+       /**
+        * Diffie Hellman group number.
+        */
+-      u_int16_t group;
++      diffie_hellman_group_t group;
+ 
+       /**
+        * EC private (public) key
+diff --git a/src/libstrongswan/plugins/pkcs11/pkcs11_dh.c b/src/libstrongswan/plugins/pkcs11/pkcs11_dh.c
+index 36cc284bf2b5..23b63d2386af 100644
+--- a/src/libstrongswan/plugins/pkcs11/pkcs11_dh.c
++++ b/src/libstrongswan/plugins/pkcs11/pkcs11_dh.c
+@@ -47,7 +47,7 @@ struct private_pkcs11_dh_t {
+       /**
+        * Diffie Hellman group number.
+        */
+-      u_int16_t group;
++      diffie_hellman_group_t group;
+ 
+       /**
+        * Handle for own private value
+-- 
+1.9.1
+

diff --git a/src/patches/u-boot/sunxi/001-uboot-sunxi-509d96d4f1f602d62d36db660973249e16f9d088.patch b/src/patches/u-boot/sunxi/001-uboot-sunxi-509d96d4f1f602d62d36db660973249e16f9d088.patch
new file mode 100644 (file)
index 0000000..15aac6b
--- /dev/null
+++ b/src/patches/u-boot/sunxi/001-uboot-sunxi-509d96d4f1f602d62d36db660973249e16f9d088.patch
@@ -0,0 +1,10002 @@
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/cmd_boot.c u-boot-sunxi/arch/arm/cpu/armv7/cmd_boot.c
+--- u-boot-2014.04/arch/arm/cpu/armv7/cmd_boot.c       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/cmd_boot.c 2014-09-06 16:58:35.193953144 +0200
+@@ -0,0 +1,20 @@
++/*
++ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++/*
++ * Misc boot support
++ */
++#include <common.h>
++#include <command.h>
++
++#ifdef CONFIG_CMD_GO
++unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc,
++                               char * const argv[])
++{
++      invalidate_icache_all();
++      return entry(argc, argv);
++}
++#endif
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/Makefile u-boot-sunxi/arch/arm/cpu/armv7/Makefile
+--- u-boot-2014.04/arch/arm/cpu/armv7/Makefile 2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/arch/arm/cpu/armv7/Makefile   2014-09-06 16:58:35.185953145 +0200
+@@ -11,8 +11,9 @@
+ 
+ obj-y += cpu.o
+ obj-y += syslib.o
++obj-y += cmd_boot.o
+ 
+-ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY),)
++ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_SUNXI),)
+ ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y)
+ obj-y += lowlevel_init.o
+ endif
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/board.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/board.c
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/board.c    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/board.c      2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,166 @@
++/*
++ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
++ *
++ * (C) Copyright 2007-2011
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * Some init for sunxi platform.
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#include <i2c.h>
++#include <netdev.h>
++#include <miiphy.h>
++#include <serial.h>
++#ifdef CONFIG_SPL_BUILD
++#include <spl.h>
++#endif
++#include <asm/gpio.h>
++#include <asm/io.h>
++#include <asm/arch/clock.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/sys_proto.h>
++#include <asm/arch/timer.h>
++#include <asm/arch/watchdog.h>
++
++#ifdef CONFIG_SPL_BUILD
++/* Pointer to the global data structure for SPL */
++DECLARE_GLOBAL_DATA_PTR;
++
++/* The sunxi internal brom will try to loader external bootloader
++ * from mmc0, nand flash, mmc2.
++ * Unfortunately we can't check how SPL was loaded so assume
++ * it's always the first SD/MMC controller
++ */
++u32 spl_boot_device(void)
++{
++      return BOOT_DEVICE_MMC1;
++}
++
++/* No confirmation data available in SPL yet. Hardcode bootmode */
++u32 spl_boot_mode(void)
++{
++      return MMCSD_MODE_RAW;
++}
++#endif
++
++int gpio_init(void)
++{
++#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F)
++#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)
++      /* disable GPB22,23 as uart0 tx,rx to avoid conflict */
++      sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT);
++      sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT);
++#endif
++      sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF2_UART0_TX);
++      sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF4_UART0_RX);
++      sunxi_gpio_set_pull(SUNXI_GPF(4), 1);
++#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I))
++      sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX);
++      sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX);
++      sunxi_gpio_set_pull(SUNXI_GPB(23), 1);
++#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN6I)
++      sunxi_gpio_set_cfgpin(SUNXI_GPH(20), 2);
++      sunxi_gpio_set_cfgpin(SUNXI_GPH(21), 2);
++      sunxi_gpio_set_pull(SUNXI_GPH(21), 1);
++#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN5I)
++      sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB19_UART0_TX);
++      sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB20_UART0_RX);
++      sunxi_gpio_set_pull(SUNXI_GPB(20), 1);
++#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_SUN5I)
++      sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG3_UART1_TX);
++      sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG4_UART1_RX);
++      sunxi_gpio_set_pull(SUNXI_GPG(4), 1);
++#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_SUN8I)
++      sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL2_R_UART_TX);
++      sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL3_R_UART_RX);
++      sunxi_gpio_set_pull(SUNXI_GPL(3), 1);
++#else
++#error Unsupported console port number. Please fix pin mux settings in board.c
++#endif
++
++      return 0;
++}
++
++void reset_cpu(ulong addr)
++{
++      watchdog_set(0);
++      while (1);
++}
++
++/* do some early init */
++void s_init(void)
++{
++#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || defined CONFIG_SUN6I)
++      /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
++      asm volatile(
++              "mrc p15, 0, r0, c1, c0, 1\n"
++              "orr r0, r0, #1 << 6\n"
++              "mcr p15, 0, r0, c1, c0, 1\n");
++#endif
++
++      watchdog_init();
++      clock_init();
++      timer_init();
++      gpio_init();
++      i2c_init_board();
++
++#ifdef CONFIG_SPL_BUILD
++      gd = &gdata;
++      preloader_console_init();
++
++#ifdef CONFIG_SPL_I2C_SUPPORT
++      /* Needed early by sunxi_board_init if PMU is enabled */
++      i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
++#endif
++#endif
++/* No SPL on sun6i, so we do sunxi_board_init() from non spl there */
++#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I)
++      sunxi_board_init();
++#endif
++}
++
++#ifndef CONFIG_SYS_DCACHE_OFF
++void enable_caches(void)
++{
++      /* Enable D-cache. I-cache is already enabled in start.S */
++      dcache_enable();
++}
++#endif
++
++#ifdef CONFIG_CMD_NET
++/*
++ * Initializes on-chip ethernet controllers.
++ * to override, implement board_eth_init()
++ */
++int cpu_eth_init(bd_t *bis)
++{
++      __maybe_unused int rc;
++
++#ifdef CONFIG_MACPWR
++      gpio_direction_output(CONFIG_MACPWR, 1);
++      mdelay(200);
++#endif
++
++#ifdef CONFIG_SUNXI_EMAC
++      rc = sunxi_emac_initialize(bis);
++      if (rc < 0) {
++              printf("sunxi: failed to initialize emac\n");
++              return rc;
++      }
++#endif
++
++#ifdef CONFIG_SUNXI_GMAC
++      rc = sunxi_gmac_initialize(bis);
++      if (rc < 0) {
++              printf("sunxi: failed to initialize gmac\n");
++              return rc;
++      }
++#endif
++
++      return 0;
++}
++#endif
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/clock.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/clock.c
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/clock.c    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/clock.c      2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,25 @@
++/*
++ * (C) Copyright 2007-2012
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/arch/clock.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/sys_proto.h>
++
++int clock_init(void)
++{
++#ifdef CONFIG_SPL_BUILD
++      clock_init_safe();
++#endif
++      clock_init_uart();
++
++      return 0;
++}
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/clock_sun4i.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/clock_sun4i.c
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/clock_sun4i.c      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/clock_sun4i.c        2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,188 @@
++/*
++ * sun4i, sun5i and sun7i specific clock code
++ *
++ * (C) Copyright 2007-2012
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/arch/clock.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/sys_proto.h>
++
++#ifdef CONFIG_SPL_BUILD
++void clock_init_safe(void)
++{
++      struct sunxi_ccm_reg * const ccm =
++              (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
++
++      /* Set safe defaults until PMU is configured */
++      writel(AXI_DIV_1 << AXI_DIV_SHIFT |
++             AHB_DIV_2 << AHB_DIV_SHIFT |
++             APB0_DIV_1 << APB0_DIV_SHIFT |
++             CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
++             &ccm->cpu_ahb_apb0_cfg);
++      writel(PLL1_CFG_DEFAULT, &ccm->pll1_cfg);
++      sdelay(200);
++      writel(AXI_DIV_1 << AXI_DIV_SHIFT |
++             AHB_DIV_2 << AHB_DIV_SHIFT |
++             APB0_DIV_1 << APB0_DIV_SHIFT |
++             CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
++             &ccm->cpu_ahb_apb0_cfg);
++#ifdef CONFIG_SUN7I
++      writel(0x1 << AHB_GATE_OFFSET_DMA | readl(&ccm->ahb_gate0),
++             &ccm->ahb_gate0);
++#endif
++      writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
++}
++#endif
++
++void clock_init_uart(void)
++{
++      struct sunxi_ccm_reg *const ccm =
++              (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
++
++      /* uart clock source is apb1 */
++      writel(APB1_CLK_SRC_OSC24M|
++             APB1_CLK_RATE_N_1|
++             APB1_CLK_RATE_M(1),
++             &ccm->apb1_clk_div_cfg);
++
++      /* open the clock for uart */
++      setbits_le32(&ccm->apb1_gate,
++              CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT+CONFIG_CONS_INDEX-1));
++}
++
++int clock_twi_onoff(int port, int state)
++{
++      struct sunxi_ccm_reg *const ccm =
++              (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
++
++      if (port > 2)
++              return -1;
++
++      /* set the apb clock gate for twi */
++      if (state)
++              setbits_le32(&ccm->apb1_gate,
++                           CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port));
++      else
++              clrbits_le32(&ccm->apb1_gate,
++                           CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port));
++
++      return 0;
++}
++
++#ifdef CONFIG_SPL_BUILD
++#define PLL1_CFG(N, K, M, P)  ( 1 << CCM_PLL1_CFG_ENABLE_SHIFT | \
++                                0 << CCM_PLL1_CFG_VCO_RST_SHIFT |  \
++                                8 << CCM_PLL1_CFG_VCO_BIAS_SHIFT | \
++                                0 << CCM_PLL1_CFG_PLL4_EXCH_SHIFT | \
++                               16 << CCM_PLL1_CFG_BIAS_CUR_SHIFT | \
++                               (P)<< CCM_PLL1_CFG_DIVP_SHIFT | \
++                                2 << CCM_PLL1_CFG_LCK_TMR_SHIFT | \
++                               (N)<< CCM_PLL1_CFG_FACTOR_N_SHIFT | \
++                               (K)<< CCM_PLL1_CFG_FACTOR_K_SHIFT | \
++                                0 << CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT | \
++                                0 << CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT | \
++                               (M)<< CCM_PLL1_CFG_FACTOR_M_SHIFT)
++
++static struct {
++      u32 pll1_cfg;
++      unsigned int freq;
++} pll1_para[] = {
++      /* This array must be ordered by frequency. */
++      { PLL1_CFG(16, 0, 0, 0), 384000000 },
++      { PLL1_CFG(16, 1, 0, 0), 768000000 },
++      { PLL1_CFG(20, 1, 0, 0), 960000000 },
++      { PLL1_CFG(21, 1, 0, 0), 1008000000},
++      { PLL1_CFG(22, 1, 0, 0), 1056000000},
++      { PLL1_CFG(23, 1, 0, 0), 1104000000},
++      { PLL1_CFG(24, 1, 0, 0), 1152000000},
++      { PLL1_CFG(25, 1, 0, 0), 1200000000},
++      { PLL1_CFG(26, 1, 0, 0), 1248000000},
++      { PLL1_CFG(27, 1, 0, 0), 1296000000},
++      { PLL1_CFG(28, 1, 0, 0), 1344000000},
++      { PLL1_CFG(29, 1, 0, 0), 1392000000},
++      { PLL1_CFG(30, 1, 0, 0), 1440000000},
++      { PLL1_CFG(31, 1, 0, 0), 1488000000},
++      /* Final catchall entry */
++      { PLL1_CFG(31, 1, 0, 0), ~0},
++};
++
++void clock_set_pll1(unsigned int hz)
++{
++      int i = 0;
++      int axi, ahb, apb0;
++      struct sunxi_ccm_reg * const ccm =
++              (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
++
++      /* Find target frequency */
++      while (pll1_para[i].freq < hz)
++              i++;
++
++      hz = pll1_para[i].freq;
++
++      /* Calculate system clock divisors */
++      axi = DIV_ROUND_UP(hz, 432000000);      /* Max 450MHz */
++      ahb = DIV_ROUND_UP(hz/axi, 204000000);  /* Max 250MHz */
++      apb0 = 2;                               /* Max 150MHz */
++
++      printf("CPU: %uHz, AXI/AHB/APB: %d/%d/%d\n", hz, axi, ahb, apb0);
++
++      /* Map divisors to register values */
++      axi = axi - 1;
++      if (ahb > 4)
++              ahb = 3;
++      else if (ahb > 2)
++              ahb = 2;
++      else if (ahb > 1)
++              ahb = 1;
++      else
++              ahb = 0;
++
++      apb0 = apb0 - 1;
++
++      /* Switch to 24MHz clock while changing PLL1 */
++      writel(AXI_DIV_1 << AXI_DIV_SHIFT |
++             AHB_DIV_2 << AHB_DIV_SHIFT |
++             APB0_DIV_1 << APB0_DIV_SHIFT |
++             CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
++             &ccm->cpu_ahb_apb0_cfg);
++      sdelay(20);
++
++      /* Configure sys clock divisors */
++      writel(axi << AXI_DIV_SHIFT |
++             ahb << AHB_DIV_SHIFT |
++             apb0 << APB0_DIV_SHIFT |
++             CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
++             &ccm->cpu_ahb_apb0_cfg);
++
++      /* Configure PLL1 at the desired frequency */
++      writel(pll1_para[i].pll1_cfg, &ccm->pll1_cfg);
++      sdelay(200);
++
++      /* Switch CPU to PLL1 */
++      writel(axi << AXI_DIV_SHIFT |
++             ahb << AHB_DIV_SHIFT |
++             apb0 << APB0_DIV_SHIFT |
++             CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
++             &ccm->cpu_ahb_apb0_cfg);
++      sdelay(20);
++}
++#endif
++
++unsigned int clock_get_pll6(void)
++{
++      struct sunxi_ccm_reg *const ccm =
++              (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
++      uint32_t rval = readl(&ccm->pll6_cfg);
++      int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
++      int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1;
++      return 24000000 * n * k / 2;
++}
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/clock_sun6i.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/clock_sun6i.c      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/clock_sun6i.c        2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,110 @@
++/*
++ * sun6i specific clock code
++ *
++ * (C) Copyright 2007-2012
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/arch/clock.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/prcm.h>
++#include <asm/arch/sys_proto.h>
++
++#ifdef CONFIG_SPL_BUILD
++void clock_init_safe(void)
++{
++      struct sunxi_ccm_reg * const ccm =
++              (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
++      struct sunxi_prcm_reg * const prcm =
++              (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
++
++      /* Set PLL ldo voltage without this PLL6 does not work properly */
++      writel(PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
++              PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140) |
++              PRCM_PLL_CTRL_LDO_KEY, &prcm->pll_ctrl1);
++      writel(PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
++              PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140) |
++              PRCM_PLL_CTRL_LDO_KEY, &prcm->pll_ctrl1);
++      writel(PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
++              PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140),
++              &prcm->pll_ctrl1);
++
++      /* AXI and PLL1 settings from boot0 / boot1, PLL1 set to 486 Mhz */
++      writel(AXI_DIV_3 << AXI_DIV_SHIFT |
++             ATB_DIV_2 << ATB_DIV_SHIFT |
++             CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
++             &ccm->cpu_axi_cfg);
++      writel(PLL1_CFG_DEFAULT, &ccm->pll1_cfg);
++      sdelay(200);
++      writel(AXI_DIV_3 << AXI_DIV_SHIFT |
++             ATB_DIV_2 << ATB_DIV_SHIFT |
++             CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
++             &ccm->cpu_axi_cfg);
++
++      writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
++}
++#endif
++
++void clock_init_uart(void)
++{
++      struct sunxi_ccm_reg *const ccm =
++              (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
++
++#if CONFIG_CONS_INDEX < 5
++      /* uart clock source is apb2 */
++      writel(APB2_CLK_SRC_OSC24M|
++             APB2_CLK_RATE_N_1|
++             APB2_CLK_RATE_M(1),
++             &ccm->apb2_div);
++
++      /* open the clock for uart */
++      setbits_le32(&ccm->apb2_gate,
++              CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT+CONFIG_CONS_INDEX-1));
++
++      /* deassert uart reset */
++      setbits_le32(&ccm->apb2_reset_cfg,
++              1 << (APB2_RESET_UART_SHIFT+CONFIG_CONS_INDEX-1));
++#else
++      /* enable R_PIO and R_UART clocks, and de-assert resets */
++      prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_UART);
++#endif
++
++      /* Dup with clock_init_safe(), drop once sun6i SPL support lands */
++      writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
++}
++
++int clock_twi_onoff(int port, int state)
++{
++      struct sunxi_ccm_reg *const ccm =
++              (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
++
++      if (port > 3)
++              return -1;
++
++      /* set the apb clock gate for twi */
++      if (state)
++              setbits_le32(&ccm->apb2_gate,
++                           CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port));
++      else
++              clrbits_le32(&ccm->apb2_gate,
++                           CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port));
++
++      return 0;
++}
++
++unsigned int clock_get_pll6(void)
++{
++      struct sunxi_ccm_reg *const ccm =
++              (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
++      uint32_t rval = readl(&ccm->pll6_cfg);
++      int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1;
++      int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1;
++      return 24000000 * n * k / 2;
++}
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/cmd_watchdog.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/cmd_watchdog.c
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/cmd_watchdog.c     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/cmd_watchdog.c       2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,29 @@
++/*
++ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/arch/watchdog.h>
++
++int do_sunxi_watchdog(cmd_tbl_t *cmdtp, int flag, int argc, const char *argv[])
++{
++      unsigned long interval;
++
++      if (argc < 2) {
++              printf("usage: watchdog seconds\n");
++              printf("over %d to disable watchdog\n", WDT_MAX_TIMEOUT);
++      }
++      interval = simple_strtoul(argv[1], NULL, 10);
++      watchdog_set((unsigned int)interval);
++
++      return 0;
++}
++
++U_BOOT_CMD(
++      watchdog, 2, 1, do_sunxi_watchdog,
++      "Set watchdog [0 - 16]. [17+} disables",
++      ""
++);
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/config.mk u-boot-sunxi/arch/arm/cpu/armv7/sunxi/config.mk
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/config.mk  1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/config.mk    2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,8 @@
++# Build a combined spl + u-boot image
++ifdef CONFIG_SPL
++ifndef CONFIG_SPL_BUILD
++ifndef CONFIG_SPL_FEL
++ALL-y += u-boot-sunxi-with-spl.bin
++endif
++endif
++endif
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/cpu_info.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/cpu_info.c
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/cpu_info.c 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/cpu_info.c   2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,38 @@
++/*
++ * (C) Copyright 2007-2011
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/arch/cpu.h>
++
++#ifdef CONFIG_DISPLAY_CPUINFO
++int print_cpuinfo(void)
++{
++#ifdef CONFIG_SUN4I
++      puts("CPU:   Allwinner A10 (SUN4I)\n");
++#elif defined CONFIG_SUN5I
++      u32 val = readl(SUNXI_SID_BASE + 0x08);
++      switch ((val >> 12) & 0xf) {
++      case 0: puts("CPU:   Allwinner A12 (SUN5I)\n"); break;
++      case 3: puts("CPU:   Allwinner A13 (SUN5I)\n"); break;
++      case 7: puts("CPU:   Allwinner A10s (SUN5I)\n"); break;
++      default: puts("CPU:   Allwinner A1X (SUN5I)\n");
++      }
++#elif defined CONFIG_SUN6I
++      puts("CPU:   Allwinner A31 (SUN6I)\n");
++#elif defined CONFIG_SUN7I
++      puts("CPU:   Allwinner A20 (SUN7I)\n");
++#elif defined CONFIG_SUN8I
++      puts("CPU:   Allwinner A23 (SUN8I)\n");
++#else
++#warning Please update cpu_info.c with correct CPU information
++      puts("CPU:   SUNXI Family\n");
++#endif
++      return 0;
++}
++#endif
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/dram.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/dram.c
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/dram.c     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/dram.c       2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,693 @@
++/*
++ * sunxi DRAM controller initialization
++ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
++ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
++ *
++ * Based on sun4i Linux kernel sources mach-sunxi/pm/standby/dram*.c
++ * and earlier U-Boot Allwiner A10 SPL work
++ *
++ * (C) Copyright 2007-2012
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Berg Xing <bergxing@allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++/*
++ * Unfortunately the only documentation we have on the sun7i DRAM
++ * controller is Allwinner boot0 + boot1 code, and that code uses
++ * magic numbers & shifts with no explanations. Hence this code is
++ * rather undocumented and full of magic.
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/arch/clock.h>
++#include <asm/arch/dram.h>
++#include <asm/arch/timer.h>
++#include <asm/arch/sys_proto.h>
++
++#define CPU_CFG_CHIP_VER(n) ((n) << 6)
++#define CPU_CFG_CHIP_VER_MASK CPU_CFG_CHIP_VER(0x3)
++#define CPU_CFG_CHIP_REV_A 0x0
++#define CPU_CFG_CHIP_REV_C1 0x1
++#define CPU_CFG_CHIP_REV_C2 0x2
++#define CPU_CFG_CHIP_REV_B 0x3
++
++/*
++ * Wait up to 1s for mask to be clear in given reg.
++ */
++static void await_completion(u32 *reg, u32 mask)
++{
++      unsigned long tmo = timer_get_us() + 1000000;
++
++      while (readl(reg) & mask) {
++              if (timer_get_us() > tmo)
++                      panic("Timeout initialising DRAM\n");
++      }
++}
++
++static void mctl_ddr3_reset(void)
++{
++      struct sunxi_dram_reg *dram =
++                      (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
++
++#ifdef CONFIG_SUN4I
++      struct sunxi_timer_reg *timer =
++                      (struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
++      u32 reg_val;
++
++      writel(0, &timer->cpu_cfg);
++      reg_val = readl(&timer->cpu_cfg);
++
++      if ((reg_val & CPU_CFG_CHIP_VER_MASK) !=
++          CPU_CFG_CHIP_VER(CPU_CFG_CHIP_REV_A)) {
++              setbits_le32(&dram->mcr, DRAM_MCR_RESET);
++              udelay(2);
++              clrbits_le32(&dram->mcr, DRAM_MCR_RESET);
++      } else
++#endif
++      {
++              clrbits_le32(&dram->mcr, DRAM_MCR_RESET);
++              udelay(2);
++              setbits_le32(&dram->mcr, DRAM_MCR_RESET);
++      }
++}
++
++static void mctl_set_drive(void)
++{
++      struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
++
++#ifdef CONFIG_SUN7I
++      clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3) | (0x3 << 28),
++#else
++      clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3),
++#endif
++                      DRAM_MCR_MODE_EN(0x3) |
++                      0xffc);
++}
++
++static void mctl_itm_disable(void)
++{
++      struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
++
++      clrsetbits_le32(&dram->ccr, DRAM_CCR_INIT, DRAM_CCR_ITM_OFF);
++}
++
++static void mctl_itm_enable(void)
++{
++      struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
++
++      clrbits_le32(&dram->ccr, DRAM_CCR_ITM_OFF);
++}
++
++static void mctl_enable_dll0(u32 phase)
++{
++      struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
++
++      clrsetbits_le32(&dram->dllcr[0], 0x3f << 6,
++                      ((phase >> 16) & 0x3f) << 6);
++      clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET, DRAM_DLLCR_DISABLE);
++      udelay(2);
++
++      clrbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET | DRAM_DLLCR_DISABLE);
++      udelay(22);
++
++      clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_DISABLE, DRAM_DLLCR_NRESET);
++      udelay(22);
++}
++
++/*
++ * Note: This differs from pm/standby in that it checks the bus width
++ */
++static void mctl_enable_dllx(u32 phase)
++{
++      struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
++      u32 i, n, bus_width;
++
++      bus_width = readl(&dram->dcr);
++
++      if ((bus_width & DRAM_DCR_BUS_WIDTH_MASK) ==
++          DRAM_DCR_BUS_WIDTH(DRAM_DCR_BUS_WIDTH_32BIT))
++              n = DRAM_DCR_NR_DLLCR_32BIT;
++      else
++              n = DRAM_DCR_NR_DLLCR_16BIT;
++
++      for (i = 1; i < n; i++) {
++              clrsetbits_le32(&dram->dllcr[i], 0xf << 14,
++                              (phase & 0xf) << 14);
++              clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET,
++                              DRAM_DLLCR_DISABLE);
++              phase >>= 4;
++      }
++      udelay(2);
++
++      for (i = 1; i < n; i++)
++              clrbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET |
++                           DRAM_DLLCR_DISABLE);
++      udelay(22);
++
++      for (i = 1; i < n; i++)
++              clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_DISABLE,
++                              DRAM_DLLCR_NRESET);
++      udelay(22);
++}
++
++static u32 hpcr_value[32] = {
++#ifdef CONFIG_SUN5I
++      0, 0, 0, 0,
++      0, 0, 0, 0,
++      0, 0, 0, 0,
++      0, 0, 0, 0,
++      0x1031, 0x1031, 0x0735, 0x1035,
++      0x1035, 0x0731, 0x1031, 0,
++      0x0301, 0x0301, 0x0301, 0x0301,
++      0x0301, 0x0301, 0x0301, 0
++#endif
++#ifdef CONFIG_SUN4I
++      0x0301, 0x0301, 0x0301, 0x0301,
++      0x0301, 0x0301, 0, 0,
++      0, 0, 0, 0,
++      0, 0, 0, 0,
++      0x1031, 0x1031, 0x0735, 0x5031,
++      0x1035, 0x0731, 0x1031, 0x0735,
++      0x1035, 0x1031, 0x0731, 0x1035,
++      0x1031, 0x0301, 0x0301, 0x0731
++#endif
++#ifdef CONFIG_SUN7I
++      0x0301, 0x0301, 0x0301, 0x0301,
++      0x0301, 0x0301, 0x0301, 0x0301,
++      0, 0, 0, 0,
++      0, 0, 0, 0,
++      0x1031, 0x1031, 0x0735, 0x1035,
++      0x1035, 0x0731, 0x1031, 0x0735,
++      0x1035, 0x1031, 0x0731, 0x1035,
++      0x0001, 0x1031, 0, 0x1031
++      /* last row differs from boot0 source table
++       * 0x1031, 0x0301, 0x0301, 0x0731
++       * but boot0 code skips #28 and #30, and sets #29 and #31 to the
++       * value from #28 entry (0x1031)
++       */
++#endif
++};
++
++static void mctl_configure_hostport(void)
++{
++      struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
++      u32 i;
++
++      for (i = 0; i < 32; i++)
++              writel(hpcr_value[i], &dram->hpcr[i]);
++}
++
++static void mctl_setup_dram_clock(u32 clk)
++{
++      u32 reg_val;
++      struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
++
++      /* setup DRAM PLL */
++      reg_val = readl(&ccm->pll5_cfg);
++      reg_val &= ~CCM_PLL5_CTRL_M_MASK;               /* set M to 0 (x1) */
++      reg_val &= ~CCM_PLL5_CTRL_K_MASK;               /* set K to 0 (x1) */
++      reg_val &= ~CCM_PLL5_CTRL_N_MASK;               /* set N to 0 (x0) */
++      reg_val &= ~CCM_PLL5_CTRL_P_MASK;               /* set P to 0 (x1) */
++      if (clk >= 540 && clk < 552) {
++              /* dram = 540MHz, pll5p = 540MHz */
++              reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
++              reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
++              reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(15));
++              reg_val |= CCM_PLL5_CTRL_P(1);
++      } else if (clk >= 512 && clk < 528) {
++              /* dram = 512MHz, pll5p = 384MHz */
++              reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
++              reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(4));
++              reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(16));
++              reg_val |= CCM_PLL5_CTRL_P(2);
++      } else if (clk >= 496 && clk < 504) {
++              /* dram = 496MHz, pll5p = 372MHz */
++              reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
++              reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
++              reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(31));
++              reg_val |= CCM_PLL5_CTRL_P(2);
++      } else if (clk >= 468 && clk < 480) {
++              /* dram = 468MHz, pll5p = 468MHz */
++              reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
++              reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
++              reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(13));
++              reg_val |= CCM_PLL5_CTRL_P(1);
++      } else if (clk >= 396 && clk < 408) {
++              /* dram = 396MHz, pll5p = 396MHz */
++              reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
++              reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
++              reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(11));
++              reg_val |= CCM_PLL5_CTRL_P(1);
++      } else  {
++              /* any other frequency that is a multiple of 24 */
++              reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
++              reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
++              reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(clk / 24));
++              reg_val |= CCM_PLL5_CTRL_P(CCM_PLL5_CTRL_P_X(2));
++      }
++      reg_val &= ~CCM_PLL5_CTRL_VCO_GAIN;             /* PLL VCO Gain off */
++      reg_val |= CCM_PLL5_CTRL_EN;                    /* PLL On */
++      writel(reg_val, &ccm->pll5_cfg);
++      udelay(5500);
++
++      setbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_DDR_CLK);
++
++#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)
++      /* reset GPS */
++      clrbits_le32(&ccm->gps_clk_cfg, CCM_GPS_CTRL_RESET | CCM_GPS_CTRL_GATE);
++      setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
++      udelay(1);
++      clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
++#endif
++
++#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
++      /* setup MBUS clock */
++      reg_val = CCM_MBUS_CTRL_GATE |
++#if defined(CONFIG_SUN7I) && defined(CONFIG_FAST_MBUS)
++                CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) |
++                CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) |
++                CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(3));
++#elif defined(CONFIG_SUN7I) && !defined(CONFIG_FAST_MBUS)
++                CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) |
++                CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(2)) |
++                CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(2));
++#else /* defined(CONFIG_SUN5I) */
++                CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL5) |
++                CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) |
++                CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(2));
++#endif
++      writel(reg_val, &ccm->mbus_clk_cfg);
++#endif
++
++      /*
++       * open DRAMC AHB & DLL register clock
++       * close it first
++       */
++#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
++      clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
++#else
++      clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM);
++#endif
++      udelay(22);
++
++      /* then open it */
++#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
++      setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
++#else
++      setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM);
++#endif
++      udelay(22);
++}
++
++static int dramc_scan_readpipe(void)
++{
++      struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
++      u32 reg_val;
++
++      /* data training trigger */
++#ifdef CONFIG_SUN7I
++      clrbits_le32(&dram->csr, DRAM_CSR_FAILED);
++#endif
++      setbits_le32(&dram->ccr, DRAM_CCR_DATA_TRAINING);
++
++      /* check whether data training process has completed */
++      await_completion(&dram->ccr, DRAM_CCR_DATA_TRAINING);
++
++      /* check data training result */
++      reg_val = readl(&dram->csr);
++      if (reg_val & DRAM_CSR_FAILED)
++              return -1;
++
++      return 0;
++}
++
++static int dramc_scan_dll_para(void)
++{
++      struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
++      const u32 dqs_dly[7] = {0x3, 0x2, 0x1, 0x0, 0xe, 0xd, 0xc};
++      const u32 clk_dly[15] = {0x07, 0x06, 0x05, 0x04, 0x03,
++                               0x02, 0x01, 0x00, 0x08, 0x10,
++                               0x18, 0x20, 0x28, 0x30, 0x38};
++      u32 clk_dqs_count[15];
++      u32 dqs_i, clk_i, cr_i;
++      u32 max_val, min_val;
++      u32 dqs_index, clk_index;
++
++      /* Find DQS_DLY Pass Count for every CLK_DLY */
++      for (clk_i = 0; clk_i < 15; clk_i++) {
++              clk_dqs_count[clk_i] = 0;
++              clrsetbits_le32(&dram->dllcr[0], 0x3f << 6,
++                              (clk_dly[clk_i] & 0x3f) << 6);
++              for (dqs_i = 0; dqs_i < 7; dqs_i++) {
++                      for (cr_i = 1; cr_i < 5; cr_i++) {
++                              clrsetbits_le32(&dram->dllcr[cr_i],
++                                              0x4f << 14,
++                                              (dqs_dly[dqs_i] & 0x4f) << 14);
++                      }
++                      udelay(2);
++                      if (dramc_scan_readpipe() == 0)
++                              clk_dqs_count[clk_i]++;
++              }
++      }
++      /* Test DQS_DLY Pass Count for every CLK_DLY from up to down */
++      for (dqs_i = 15; dqs_i > 0; dqs_i--) {
++              max_val = 15;
++              min_val = 15;
++              for (clk_i = 0; clk_i < 15; clk_i++) {
++                      if (clk_dqs_count[clk_i] == dqs_i) {
++                              max_val = clk_i;
++                              if (min_val == 15)
++                                      min_val = clk_i;
++                      }
++              }
++              if (max_val < 15)
++                      break;
++      }
++
++      /* Check if Find a CLK_DLY failed */
++      if (!dqs_i)
++              goto fail;
++
++      /* Find the middle index of CLK_DLY */
++      clk_index = (max_val + min_val) >> 1;
++      if ((max_val == (15 - 1)) && (min_val > 0))
++              /* if CLK_DLY[MCTL_CLK_DLY_COUNT] is very good, then the middle
++               * value can be more close to the max_val
++               */
++              clk_index = (15 + clk_index) >> 1;
++      else if ((max_val < (15 - 1)) && (min_val == 0))
++              /* if CLK_DLY[0] is very good, then the middle value can be more
++               * close to the min_val
++               */
++              clk_index >>= 1;
++      if (clk_dqs_count[clk_index] < dqs_i)
++              clk_index = min_val;
++
++      /* Find the middle index of DQS_DLY for the CLK_DLY got above, and Scan
++       * read pipe again
++       */
++      clrsetbits_le32(&dram->dllcr[0], 0x3f << 6,
++                      (clk_dly[clk_index] & 0x3f) << 6);
++      max_val = 7;
++      min_val = 7;
++      for (dqs_i = 0; dqs_i < 7; dqs_i++) {
++              clk_dqs_count[dqs_i] = 0;
++              for (cr_i = 1; cr_i < 5; cr_i++) {
++                      clrsetbits_le32(&dram->dllcr[cr_i],
++                                      0x4f << 14,
++                                      (dqs_dly[dqs_i] & 0x4f) << 14);
++              }
++              udelay(2);
++              if (dramc_scan_readpipe() == 0) {
++                      clk_dqs_count[dqs_i] = 1;
++                      max_val = dqs_i;
++                      if (min_val == 7)
++                              min_val = dqs_i;
++              }
++      }
++
++      if (max_val < 7) {
++              dqs_index = (max_val + min_val) >> 1;
++              if ((max_val == (7-1)) && (min_val > 0))
++                      dqs_index = (7 + dqs_index) >> 1;
++              else if ((max_val < (7-1)) && (min_val == 0))
++                      dqs_index >>= 1;
++              if (!clk_dqs_count[dqs_index])
++                      dqs_index = min_val;
++              for (cr_i = 1; cr_i < 5; cr_i++) {
++                      clrsetbits_le32(&dram->dllcr[cr_i],
++                                      0x4f << 14,
++                                      (dqs_dly[dqs_index] & 0x4f) << 14);
++              }
++              udelay(2);
++              return dramc_scan_readpipe();
++      }
++
++fail:
++      clrbits_le32(&dram->dllcr[0], 0x3f << 6);
++      for (cr_i = 1; cr_i < 5; cr_i++)
++              clrbits_le32(&dram->dllcr[cr_i], 0x4f << 14);
++      udelay(2);
++
++      return dramc_scan_readpipe();
++}
++
++static void dramc_clock_output_en(u32 on)
++{
++#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
++      struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
++
++      if (on)
++              setbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
++      else
++              clrbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
++#endif
++#ifdef CONFIG_SUN4I
++      struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
++      if (on)
++              setbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT);
++      else
++              clrbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT);
++#endif
++}
++
++static const u16 tRFC_table[2][6] = {
++      /*       256Mb    512Mb    1Gb      2Gb      4Gb      8Gb      */
++      /* DDR2  75ns     105ns    127.5ns  195ns    327.5ns  invalid  */
++      {        77,      108,     131,     200,     336,     336 },
++      /* DDR3  invalid  90ns     110ns    160ns    300ns    350ns    */
++      {        93,      93,      113,     164,     308,     359 }
++};
++
++static void dramc_set_autorefresh_cycle(u32 clk, u32 type, u32 density)
++{
++      struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
++      u32 tRFC, tREFI;
++
++      tRFC = (tRFC_table[type][density] * clk + 1023) >> 10;
++      tREFI = (7987 * clk) >> 10;     /* <= 7.8us */
++
++      writel(DRAM_DRR_TREFI(tREFI) | DRAM_DRR_TRFC(tRFC), &dram->drr);
++}
++
++unsigned long dramc_init(struct dram_para *para)
++{
++      struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
++      u32 reg_val;
++      u32 density;
++      int ret_val;
++
++      /* check input dram parameter structure */
++      if (!para)
++              return 0;
++
++      /* setup DRAM relative clock */
++      mctl_setup_dram_clock(para->clock);
++
++#ifdef CONFIG_SUN5I
++      /* Disable any pad power save control */
++      writel(0, &dram->ppwrsctl);
++#endif
++
++      /* reset external DRAM */
++#ifndef CONFIG_SUN7I
++      mctl_ddr3_reset();
++#endif
++      mctl_set_drive();
++
++      /* dram clock off */
++      dramc_clock_output_en(0);
++
++#ifdef CONFIG_SUN4I
++      /* select dram controller 1 */
++      writel(DRAM_CSEL_MAGIC, &dram->csel);
++#endif
++
++      mctl_itm_disable();
++      mctl_enable_dll0(para->tpr3);
++
++      /* configure external DRAM */
++      reg_val = 0x0;
++      if (para->type == DRAM_MEMORY_TYPE_DDR3)
++              reg_val |= DRAM_DCR_TYPE_DDR3;
++      reg_val |= DRAM_DCR_IO_WIDTH(para->io_width >> 3);
++
++      if (para->density == 256)
++              density = DRAM_DCR_CHIP_DENSITY_256M;
++      else if (para->density == 512)
++              density = DRAM_DCR_CHIP_DENSITY_512M;
++      else if (para->density == 1024)
++              density = DRAM_DCR_CHIP_DENSITY_1024M;
++      else if (para->density == 2048)
++              density = DRAM_DCR_CHIP_DENSITY_2048M;
++      else if (para->density == 4096)
++              density = DRAM_DCR_CHIP_DENSITY_4096M;
++      else if (para->density == 8192)
++              density = DRAM_DCR_CHIP_DENSITY_8192M;
++      else
++              density = DRAM_DCR_CHIP_DENSITY_256M;
++
++      reg_val |= DRAM_DCR_CHIP_DENSITY(density);
++      reg_val |= DRAM_DCR_BUS_WIDTH((para->bus_width >> 3) - 1);
++      reg_val |= DRAM_DCR_RANK_SEL(para->rank_num - 1);
++      reg_val |= DRAM_DCR_CMD_RANK_ALL;
++      reg_val |= DRAM_DCR_MODE(DRAM_DCR_MODE_INTERLEAVE);
++      writel(reg_val, &dram->dcr);
++
++#ifdef CONFIG_SUN7I
++      setbits_le32(&dram->zqcr1, (0x1 << 24) | (0x1 << 1));
++      if (para->tpr4 & 0x2)
++              clrsetbits_le32(&dram->zqcr1, (0x1 << 24), (0x1 << 1));
++      dramc_clock_output_en(1);
++#endif
++
++#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I))
++      /* set odt impendance divide ratio */
++      reg_val = ((para->zq) >> 8) & 0xfffff;
++      reg_val |= ((para->zq) & 0xff) << 20;
++      reg_val |= (para->zq) & 0xf0000000;
++      writel(reg_val, &dram->zqcr0);
++#endif
++
++#ifdef CONFIG_SUN7I
++      /* Set CKE Delay to about 1ms */
++      setbits_le32(&dram->idcr, 0x1ffff);
++#endif
++
++#ifdef CONFIG_SUN7I
++      if ((readl(&dram->ppwrsctl) & 0x1) != 0x1)
++              mctl_ddr3_reset();
++      else
++              setbits_le32(&dram->mcr, DRAM_MCR_RESET);
++#else
++      /* dram clock on */
++      dramc_clock_output_en(1);
++#endif
++
++      udelay(1);
++
++      await_completion(&dram->ccr, DRAM_CCR_INIT);
++
++      mctl_enable_dllx(para->tpr3);
++
++#ifdef CONFIG_SUN4I
++      /* set odt impedance divide ratio */
++      reg_val = ((para->zq) >> 8) & 0xfffff;
++      reg_val |= ((para->zq) & 0xff) << 20;
++      reg_val |= (para->zq) & 0xf0000000;
++      writel(reg_val, &dram->zqcr0);
++#endif
++
++#ifdef CONFIG_SUN4I
++      /* set I/O configure register */
++      reg_val = 0x00cc0000;
++      reg_val |= (para->odt_en) & 0x3;
++      reg_val |= ((para->odt_en) & 0x3) << 30;
++      writel(reg_val, &dram->iocr);
++#endif
++
++      /* set refresh period */
++      dramc_set_autorefresh_cycle(para->clock, para->type - 2, density);
++
++      /* set timing parameters */
++      writel(para->tpr0, &dram->tpr0);
++      writel(para->tpr1, &dram->tpr1);
++      writel(para->tpr2, &dram->tpr2);
++
++      if (para->type == DRAM_MEMORY_TYPE_DDR3) {
++              reg_val = DRAM_MR_BURST_LENGTH(0x0);
++#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I))
++              reg_val |= DRAM_MR_POWER_DOWN;
++#endif
++              reg_val |= DRAM_MR_CAS_LAT(para->cas - 4);
++              reg_val |= DRAM_MR_WRITE_RECOVERY(0x5);
++      } else if (para->type == DRAM_MEMORY_TYPE_DDR2) {
++              reg_val = DRAM_MR_BURST_LENGTH(0x2);
++              reg_val |= DRAM_MR_CAS_LAT(para->cas);
++              reg_val |= DRAM_MR_WRITE_RECOVERY(0x5);
++      }
++      writel(reg_val, &dram->mr);
++
++      writel(para->emr1, &dram->emr);
++      writel(para->emr2, &dram->emr2);
++      writel(para->emr3, &dram->emr3);
++
++      /* set DQS window mode */
++      clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE);
++
++#ifdef CONFIG_SUN7I
++      /* Command rate timing mode 2T & 1T */
++      if (para->tpr4 & 0x1)
++              setbits_le32(&dram->ccr, DRAM_CCR_COMMAND_RATE_1T);
++#endif
++      /* reset external DRAM */
++      setbits_le32(&dram->ccr, DRAM_CCR_INIT);
++      await_completion(&dram->ccr, DRAM_CCR_INIT);
++
++#ifdef CONFIG_SUN7I
++      /* setup zq calibration manual */
++      reg_val = readl(&dram->ppwrsctl);
++      if ((reg_val & 0x1) == 1) {
++              /* super_standby_flag = 1 */
++
++              reg_val = readl(0x01c20c00 + 0x120); /* rtc */
++              reg_val &= 0x000fffff;
++              reg_val |= 0x17b00000;
++              writel(reg_val, &dram->zqcr0);
++
++              /* exit self-refresh state */
++              clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x12 << 27);
++              /* check whether command has been executed */
++              await_completion(&dram->dcr, 0x1 << 31);
++
++              udelay(2);
++
++              /* dram pad hold off */
++              setbits_le32(&dram->ppwrsctl, 0x16510000);
++
++              await_completion(&dram->ppwrsctl, 0x1);
++
++              /* exit self-refresh state */
++              clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x12 << 27);
++
++              /* check whether command has been executed */
++              await_completion(&dram->dcr, 0x1 << 31);
++
++              udelay(2);
++
++              /* issue a refresh command */
++              clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x13 << 27);
++              await_completion(&dram->dcr, 0x1 << 31);
++
++              udelay(2);
++      }
++#endif
++
++      /* scan read pipe value */
++      mctl_itm_enable();
++      if (para->tpr3 & (0x1 << 31)) {
++              ret_val = dramc_scan_dll_para();
++              if (ret_val == 0)
++                      para->tpr3 =
++                              (((readl(&dram->dllcr[0]) >> 6) & 0x3f) << 16) |
++                              (((readl(&dram->dllcr[1]) >> 14) & 0xf) << 0) |
++                              (((readl(&dram->dllcr[2]) >> 14) & 0xf) << 4) |
++                              (((readl(&dram->dllcr[3]) >> 14) & 0xf) << 8) |
++                              (((readl(&dram->dllcr[4]) >> 14) & 0xf) << 12
++                              );
++      } else {
++              ret_val = dramc_scan_readpipe();
++      }
++
++      if (ret_val < 0)
++              return 0;
++
++      /* configure all host port */
++      mctl_configure_hostport();
++
++      return get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE);
++}
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/early_print.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/early_print.c
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/early_print.c      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/early_print.c        2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,55 @@
++/*
++ * (C) Copyright 2007-2012
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * Early uart print for debugging.
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/early_print.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/sys_proto.h>
++
++static int uart_initialized = 0;
++
++#if CONFIG_CONS_INDEX < 5
++#define UART  CONFIG_CONS_INDEX-1
++#else
++/* SUNXI_R_UART_BASE */
++#define UART  2922
++#endif
++
++void uart_init(void) {
++
++      /* select dll dlh */
++      writel(UART_LCR_DLAB, UART_LCR(UART));
++      /* set baudrate */
++      writel(0, UART_DLH(UART));
++      writel(BAUD_115200, UART_DLL(UART));
++      /* set line control */
++      writel(LC_8_N_1, UART_LCR(UART));
++
++      uart_initialized = 1;
++}
++
++#define TX_READY (readl(UART_LSR(UART)) & UART_LSR_TEMT)
++
++void uart_putc(char c) {
++
++      while (!TX_READY)
++              ;
++      writel(c, UART_THR(UART));
++}
++
++void uart_puts(const char *s) {
++
++      while (*s)
++              uart_putc(*s++);
++}
++
++
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/Makefile u-boot-sunxi/arch/arm/cpu/armv7/sunxi/Makefile
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/Makefile   1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/Makefile     2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,44 @@
++#
++# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
++#
++# Based on some other Makefile
++# (C) Copyright 2000-2003
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# SPDX-License-Identifier:    GPL-2.0+
++#
++obj-y += timer.o
++obj-y += board.o
++obj-y += clock.o
++obj-y += pinmux.o
++obj-y += watchdog.o
++obj-$(CONFIG_SUN6I)   += prcm.o
++obj-$(CONFIG_SUN8I)   += prcm.o
++obj-$(CONFIG_SUN6I)   += p2wi.o
++obj-$(CONFIG_SUN4I)   += clock_sun4i.o
++obj-$(CONFIG_SUN5I)   += clock_sun4i.o
++obj-$(CONFIG_SUN6I)   += clock_sun6i.o
++obj-$(CONFIG_SUN7I)   += clock_sun4i.o
++obj-$(CONFIG_SUN8I)   += clock_sun6i.o
++ifdef DEBUG
++obj-y += early_print.o
++endif
++obj-$(CONFIG_BOARD_POSTCLK_INIT)      += postclk_init.o
++obj-$(CONFIG_SYS_SECONDARY_ON)        += secondary_init.o
++obj-$(CONFIG_SYS_SECONDARY_ON)        += smp.o
++
++ifndef CONFIG_SPL_BUILD
++obj-y += cpu_info.o
++ifdef CONFIG_CMD_WATCHDOG
++obj-$(CONFIG_CMD_WATCHDOG)    += cmd_watchdog.o
++endif
++endif
++
++ifdef CONFIG_SPL_BUILD
++obj-$(CONFIG_SUN4I)   += dram.o
++obj-$(CONFIG_SUN5I)   += dram.o
++obj-$(CONFIG_SUN7I)   += dram.o
++ifdef CONFIG_SPL_FEL
++obj-y += start.o
++endif
++endif
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/p2wi.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/p2wi.c
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/p2wi.c     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/p2wi.c       2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,120 @@
++/*
++ * Sunxi A31 Power Management Unit
++ *
++ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
++ * http://linux-sunxi.org
++ *
++ * Based on sun6i sources and earlier U-Boot Allwiner A10 SPL work
++ *
++ * (C) Copyright 2006-2013
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Berg Xing <bergxing@allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#include <errno.h>
++#include <asm/io.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/p2wi.h>
++#include <asm/arch/prcm.h>
++#include <asm/arch/clock.h>
++#include <asm/arch/sys_proto.h>
++
++void p2wi_init(void)
++{
++      struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUNXI_P2WI_BASE;
++
++      /* Enable p2wi and PIO clk, and de-assert their resets */
++      prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_P2WI);
++
++      sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUNXI_GPL0_R_P2WI_SCK);
++      sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUNXI_GPL1_R_P2WI_SDA);
++
++      /* Reset p2wi controller and set clock to CLKIN(12)/8 = 1.5 MHz */
++      writel(P2WI_CTRL_RESET, &p2wi->ctrl);
++      sdelay(0x100);
++      writel(P2WI_CC_SDA_OUT_DELAY(1) | P2WI_CC_CLK_DIV(8),
++             &p2wi->cc);
++}
++
++int p2wi_set_pmu_address(u8 slave_addr, u8 ctrl_reg, u8 init_data)
++{
++      struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUNXI_P2WI_BASE;
++      int i;
++
++      writel(P2WI_PM_DEV_ADDR(slave_addr) |
++             P2WI_PM_CTRL_ADDR(ctrl_reg) |
++             P2WI_PM_INIT_DATA(init_data) |
++             P2WI_PM_INIT_SEND,
++             &p2wi->pm);
++      for (i = 0xffffff; i != 0; i--)
++              if (!(readl(&p2wi->pm) & P2WI_PM_INIT_SEND))
++                      break;
++      if (readl(&p2wi->pm) & P2WI_PM_INIT_SEND)
++              return -EFAULT;
++
++      return 0;
++}
++
++int p2wi_read(const u8 addr, u8 *data)
++{
++      struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUNXI_P2WI_BASE;
++      int i, ret = 0;
++      u8 reg;
++
++      writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0);
++      writel(P2WI_DATA_NUM_BYTES(1) |
++             P2WI_DATA_NUM_BYTES_READ, &p2wi->numbytes);
++      writel(P2WI_STAT_TRANS_DONE, &p2wi->status);
++      writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl);
++
++      for (i = 0xffffff; i != 0; i--) {
++              reg = readl(&p2wi->status);
++              if (reg & P2WI_STAT_TRANS_ERR) {
++                      ret = -EIO;
++                      break;
++                }
++              if (reg & P2WI_STAT_TRANS_DONE)
++                      break;
++        }
++
++      if (i == 0)
++              ret = -ETIME;
++
++      *data = readl(&p2wi->data0) & P2WI_DATA_BYTE_1_MASK;
++      writel(reg, &p2wi->status); /* Clear status bits */
++      return ret;
++}
++
++int p2wi_write(const u8 addr, u8 data)
++{
++      struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUNXI_P2WI_BASE;
++      int i, ret = 0;
++      u8 reg;
++
++      writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0);
++      writel(P2WI_DATA_BYTE_1(data), &p2wi->data0);
++      writel(P2WI_DATA_NUM_BYTES(1), &p2wi->numbytes);
++      writel(P2WI_STAT_TRANS_DONE, &p2wi->status);
++      writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl);
++
++      for (i = 0xffffff; i != 0; i--) {
++              reg = readl(&p2wi->status);
++              if (reg & P2WI_STAT_TRANS_ERR) {
++                      ret = -EIO;
++                      break;
++                }
++              if (reg & P2WI_STAT_TRANS_DONE)
++                      break;
++        }
++
++      if (i == 0)
++              ret = -ETIME;
++
++      writel(reg, &p2wi->status); /* Clear status bits */
++      return ret;
++}
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/pinmux.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/pinmux.c
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/pinmux.c   1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/pinmux.c     2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,61 @@
++/*
++ * (C) Copyright 2007-2011
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/arch/gpio.h>
++
++int sunxi_gpio_set_cfgpin(u32 pin, u32 val)
++{
++      u32 bank = GPIO_BANK(pin);
++      u32 index = GPIO_CFG_INDEX(pin);
++      u32 offset = GPIO_CFG_OFFSET(pin);
++      struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
++
++      clrsetbits_le32(&pio->cfg[0] + index, 0xf << offset, val << offset);
++
++      return 0;
++}
++
++int sunxi_gpio_get_cfgpin(u32 pin)
++{
++      u32 cfg;
++      u32 bank = GPIO_BANK(pin);
++      u32 index = GPIO_CFG_INDEX(pin);
++      u32 offset = GPIO_CFG_OFFSET(pin);
++      struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
++
++      cfg = readl(&pio->cfg[0] + index);
++      cfg >>= offset;
++
++      return cfg & 0xf;
++}
++
++int sunxi_gpio_set_drv(u32 pin, u32 val)
++{
++      u32 bank = GPIO_BANK(pin);
++      u32 index = GPIO_DRV_INDEX(pin);
++      u32 offset = GPIO_DRV_OFFSET(pin);
++      struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
++
++      clrsetbits_le32(&pio->drv[0] + index, 0x3 << offset, val << offset);
++
++      return 0;
++}
++
++int sunxi_gpio_set_pull(u32 pin, u32 val)
++{
++      u32 bank = GPIO_BANK(pin);
++      u32 index = GPIO_PULL_INDEX(pin);
++      u32 offset = GPIO_PULL_OFFSET(pin);
++      struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
++
++      clrsetbits_le32(&pio->pull[0] + index, 0x3 << offset, val << offset);
++
++      return 0;
++}
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/postclk_init.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/postclk_init.c
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/postclk_init.c     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/postclk_init.c       2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,20 @@
++/*
++ * (C) Copyright 2013
++ * Carl van Schaik <carl@ok-labs.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#if defined(CONFIG_SYS_SECONDARY_ON)
++#include <asm/arch/smp.h>
++#endif
++
++
++int board_postclk_init(void)
++{
++#if defined(CONFIG_SYS_SECONDARY_ON)
++      startup_secondaries();
++#endif
++      return 0;
++}
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/prcm.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/prcm.c
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/prcm.c     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/prcm.c       2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,35 @@
++/*
++ * Sunxi A31 Power Management Unit
++ *
++ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
++ * http://linux-sunxi.org
++ *
++ * Based on sun6i sources and earlier U-Boot Allwiner A10 SPL work
++ *
++ * (C) Copyright 2006-2013
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Berg Xing <bergxing@allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#include <errno.h>
++#include <asm/io.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/prcm.h>
++#include <asm/arch/sys_proto.h>
++
++/* APB0 clock gate and reset bit offsets are the same. */
++void prcm_apb0_enable(u32 flags)
++{
++      struct sunxi_prcm_reg *prcm =
++              (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
++
++      /* open the clock for module */
++      setbits_le32(&prcm->apb0_gate, flags);
++
++      /* deassert reset for module */
++      setbits_le32(&prcm->apb0_reset, flags);
++}
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/secondary_init.S u-boot-sunxi/arch/arm/cpu/armv7/sunxi/secondary_init.S
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/secondary_init.S   1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/secondary_init.S     2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,31 @@
++/*
++ * A lowlevel_init function that sets up the stack to call a C function to
++ * perform further init.
++ *
++ * (C) Copyright 2013
++ * Carl van Schaik <carl@ok-labs.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++#include <asm-offsets.h>
++#include <config.h>
++#include <linux/linkage.h>
++
++ENTRY(secondary_init)
++      /* Get cpu number : r5 */
++      mrc     p15, 0, r5, c0, c0, 5
++      and     r5, r5, #0xff
++
++      /*
++       * Setup a secondary stack, each core gets 128 bytes.
++       */
++      ldr     sp, =secondary_stack
++      mov     r0, #0x80
++      add     sp, sp, r0, lsl r5
++
++      /*
++       * Jump to C
++       */
++      bl      secondary_start
++ENDPROC(secondary_init)
++
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/smp.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/smp.c
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/smp.c      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/smp.c        2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,80 @@
++/*
++ * (C) Copyright 2013
++ * Carl van Schaik <carl@ok-labs.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/arch/smp.h>
++#include <asm/arch/cpucfg.h>
++
++/* Right now we assume only a single secondary as in sun7i */
++#if defined(CONFIG_SUN7I)
++#define NUM_CORES 2
++#else
++#error unsupported SoC
++#endif
++
++static void secondary_pen(void)
++{
++      struct sunxi_cpucfg *cpucfg = (struct sunxi_cpucfg *)SUNXI_CPUCFG_BASE;
++
++      while (1) {
++              __asm__ __volatile__("wfe" ::: "memory");
++
++              unsigned long boot_addr = readl(&cpucfg->boot_addr);
++
++              __asm__ __volatile__(
++                      "mov    r14, %0 \n"
++                      "bx     r14     \n"
++                      : : "r" (boot_addr)
++              );
++      };
++}
++
++u32 secondary_stack[32*(NUM_CORES-1)];
++
++void secondary_start(void)
++{
++      secondary_pen();
++}
++
++/* Power on secondaries */
++void startup_secondaries(void)
++{
++      int i;
++      struct sunxi_cpucfg *cpucfg = (struct sunxi_cpucfg *)SUNXI_CPUCFG_BASE;
++
++      writel((u32)secondary_init, &cpucfg->boot_addr);
++
++      for (i = 1; i < NUM_CORES; i++) {
++              /* Assert CPU reset just in case */
++              writel(CPU_RESET_SET, &cpucfg->cpu[i].reset_ctrl);
++              /* Ensure CPU reset also invalidates L1 caches */
++              clrbits_le32(&cpucfg->general_ctrl,
++                              GENERAL_CTRL_NO_L1_RESET_CPU(i));
++              /* Lock CPU */
++              clrbits_le32(&cpucfg->debug1_ctrl, 1 << i);
++
++              /* Ramp up power to CPU1 */
++              assert(i == 1);
++              u32 j = 0xff << 1;
++              do {
++                      j = j >> 1;
++                      writel(j, &cpucfg->cpu1_power_clamp);
++              } while (j != 0);
++
++              udelay(10*1000); /* 10ms */
++
++              clrbits_le32(&cpucfg->cpu1_power_off, 1);
++              /* Release CPU reset */
++              writel(CPU_RESET_CLEAR, &cpucfg->cpu[i].reset_ctrl);
++
++              /* Unlock CPU */
++              setbits_le32(&cpucfg->debug1_ctrl, 1 << i);
++
++              printf("Secondary CPU%d power-on\n", i);
++      }
++}
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/start.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/start.c
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/start.c    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/start.c      2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1 @@
++/* Intentionally empty. Only needed to get FEL SPL link line right */
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/timer.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/timer.c
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/timer.c    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/timer.c      2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,113 @@
++/*
++ * (C) Copyright 2007-2011
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/arch/timer.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++
++#define TIMER_MODE   (0x0 << 7)       /* continuous mode */
++#define TIMER_DIV    (0x0 << 4)       /* pre scale 1 */
++#define TIMER_SRC    (0x1 << 2)       /* osc24m */
++#define TIMER_RELOAD (0x1 << 1)       /* reload internal value */
++#define TIMER_EN     (0x1 << 0)       /* enable timer */
++
++#define TIMER_CLOCK           (24 * 1000 * 1000)
++#define COUNT_TO_USEC(x)      ((x) / 24)
++#define USEC_TO_COUNT(x)      ((x) * 24)
++#define TICKS_PER_HZ          (TIMER_CLOCK / CONFIG_SYS_HZ)
++#define TICKS_TO_HZ(x)                ((x) / TICKS_PER_HZ)
++
++#define TIMER_LOAD_VAL                0xffffffff
++
++#define TIMER_NUM             0       /* we use timer 0 */
++
++/* read the 32-bit timer */
++static ulong read_timer(void)
++{
++      struct sunxi_timer_reg *timers =
++              (struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
++      struct sunxi_timer *timer = &timers->timer[TIMER_NUM];
++
++      /*
++       * The hardware timer counts down, therefore we invert to
++       * produce an incrementing timer.
++       */
++      return ~readl(&timer->val);
++}
++
++/* init timer register */
++int timer_init(void)
++{
++      struct sunxi_timer_reg *timers =
++              (struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
++      struct sunxi_timer *timer = &timers->timer[TIMER_NUM];
++      writel(TIMER_LOAD_VAL, &timer->inter);
++      writel(TIMER_MODE | TIMER_DIV | TIMER_SRC | TIMER_RELOAD | TIMER_EN,
++             &timer->ctl);
++
++      return 0;
++}
++
++/* timer without interrupts */
++ulong get_timer(ulong base)
++{
++      return get_timer_masked() - base;
++}
++
++ulong get_timer_masked(void)
++{
++      /* current tick value */
++      ulong now = TICKS_TO_HZ(read_timer());
++
++      if (now >= gd->arch.lastinc)    /* normal (non rollover) */
++              gd->arch.tbl += (now - gd->arch.lastinc);
++      else {
++              /* rollover */
++              gd->arch.tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL)
++                              - gd->arch.lastinc) + now;
++      }
++      gd->arch.lastinc = now;
++
++      return gd->arch.tbl;
++}
++
++/* delay x useconds */
++void __udelay(unsigned long usec)
++{
++      long tmo = USEC_TO_COUNT(usec);
++      ulong now, last = read_timer();
++
++      while (tmo > 0) {
++              now = read_timer();
++              if (now > last) /* normal (non rollover) */
++                      tmo -= now - last;
++              else            /* rollover */
++                      tmo -= TIMER_LOAD_VAL - last + now;
++              last = now;
++      }
++}
++
++/*
++ * This function is derived from PowerPC code (read timebase as long long).
++ * On ARM it just returns the timer value.
++ */
++unsigned long long get_ticks(void)
++{
++      return get_timer(0);
++}
++
++/*
++ * This function is derived from PowerPC code (timebase clock frequency).
++ * On ARM it returns the number of timer ticks per second.
++ */
++ulong get_tbclk(void)
++{
++      return CONFIG_SYS_HZ;
++}
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds u-boot-sunxi/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds   2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,77 @@
++/*
++ * (C) Copyright 2013
++ * Henrik Nordstrom <henrik@henriknordstrom.net>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
++OUTPUT_ARCH(arm)
++ENTRY(s_init)
++SECTIONS
++{
++      . = 0x00002000;
++
++      . = ALIGN(4);
++      .text :
++      {
++              *(.text.s_init)
++              *(.text*)
++      }
++
++      . = ALIGN(4);
++      .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
++
++      . = ALIGN(4);
++      .data : {
++              *(.data*)
++      }
++
++      . = ALIGN(4);
++      . = .;
++
++      . = ALIGN(4);
++      .rel.dyn : {
++              __rel_dyn_start = .;
++              *(.rel*)
++              __rel_dyn_end = .;
++      }
++
++      .dynsym : {
++              __dynsym_start = .;
++              *(.dynsym)
++      }
++
++      . = ALIGN(4);
++      .note.gnu.build-id :
++      {
++              *(.note.gnu.build-id)
++      }
++      _end = .;
++
++      . = ALIGN(4096);
++      .mmutable : {
++              *(.mmutable)
++      }
++
++      .bss_start __rel_dyn_start (OVERLAY) : {
++              KEEP(*(.__bss_start));
++              __bss_base = .;
++      }
++
++      .bss __bss_base (OVERLAY) : {
++              *(.bss*)
++              . = ALIGN(4);
++              __bss_limit = .;
++      }
++
++      .bss_end __bss_limit (OVERLAY) : {
++              KEEP(*(.__bss_end));
++      }
++
++      /DISCARD/ : { *(.dynstr*) }
++      /DISCARD/ : { *(.dynamic*) }
++      /DISCARD/ : { *(.plt*) }
++      /DISCARD/ : { *(.interp*) }
++      /DISCARD/ : { *(.gnu*) }
++      /DISCARD/ : { *(.note*) }
++}
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds u-boot-sunxi/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds       2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,52 @@
++/*
++ * (C) Copyright 2012
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * Based on omap-common/u-boot-spl.lds:
++ *
++ * (C) Copyright 2002
++ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
++ *
++ * (C) Copyright 2010
++ * Texas Instruments, <www.ti.com>
++ *    Aneesh V <aneesh@ti.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
++              LENGTH = CONFIG_SPL_MAX_SIZE }
++MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
++              LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
++
++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
++OUTPUT_ARCH(arm)
++ENTRY(_start)
++SECTIONS
++{
++      .text      :
++      {
++              __start = .;
++              arch/arm/cpu/armv7/start.o      (.text)
++              *(.text*)
++      } > .sram
++
++      . = ALIGN(4);
++      .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
++
++      . = ALIGN(4);
++      .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
++
++      . = ALIGN(4);
++      __image_copy_end = .;
++      _end = .;
++
++      .bss :
++      {
++              . = ALIGN(4);
++              __bss_start = .;
++              *(.bss*)
++              . = ALIGN(4);
++              __bss_end = .;
++      } > .sdram
++}
+diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/watchdog.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/watchdog.c
+--- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/watchdog.c 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/watchdog.c   2014-09-06 16:58:35.317953141 +0200
+@@ -0,0 +1,83 @@
++/*
++ * Watchdog driver for the Allwinner sunxi platform.
++ * Copyright (C) 2013  Oliver Schinagl <oliver@schinagl.nl>
++ * http://www.linux-sunxi.org/
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <asm/io.h>
++#include <asm/arch/timer.h>
++#include <asm/arch/watchdog.h>
++#include <common.h>
++#include <watchdog.h>
++
++
++#define WDT_CTRL_RESTART      (0x1 << 0)
++#define WDT_CTRL_KEY          (0x0a57 << 1)
++
++#define WDT_MODE_EN           (0x1 << 0)
++#define WDT_MODE_RESET_EN     (0x1 << 1)
++#define WDT_MAX_TIMEOUT               16
++#define WDT_MODE_TIMEOUT(n) \
++       (wdt_timeout_map[(n) < WDT_MAX_TIMEOUT ? (n) : WDT_MAX_TIMEOUT] << 3)
++
++
++/*
++ * Watchdog timeout table. The sunxi cores only use 4 bits for the watchdog as
++ * set by the table below. The gaps are filled by rounding up to the next
++ * second up.
++ */
++const unsigned int wdt_timeout_map[] = {
++      [0] = 0b0000,  /* 0.5s*/
++      [1] = 0b0001,  /* 1s  */
++      [2] = 0b0010,  /* 2s  */
++      [3] = 0b0011,  /* 3s  */
++      [4] = 0b0100,  /* 4s  */
++      [5] = 0b0101,  /* 5s  */
++      [6] = 0b0110,  /* 6s  */
++      [7] = 0b0111,  /* 8s  */
++      [8] = 0b0111,  /* 8s  */
++      [9] = 0b1000, /* 10s */
++      [10] = 0b1000, /* 10s */
++      [11] = 0b1001, /* 12s */
++      [12] = 0b1001, /* 12s */
++      [13] = 0b1010, /* 14s */
++      [14] = 0b1010, /* 14s */
++      [15] = 0b1011, /* 16s */
++      [16] = 0b1011, /* 16s */
++};
++
++
++void watchdog_reset(void)
++{
++      static const struct sunxi_wdog *wdog =
++              &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
++
++      writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
++}
++
++void watchdog_set(int timeout)
++{
++      static struct sunxi_wdog *const wdog =
++              &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
++
++      /* Set timeout, reset & enable */
++      if (timeout >= 0) {
++              writel(WDT_MODE_TIMEOUT(timeout) |
++                              WDT_MODE_RESET_EN | WDT_MODE_EN,
++                     &wdog->mode);
++      } else {
++              writel(0, &wdog->mode);
++      }
++      watchdog_reset();
++}
++
++void watchdog_init(void)
++{
++#ifdef CONFIG_WATCHDOG
++      watchdog_set(WDT_MAX_TIMEOUT);
++#else
++      watchdog_set(WDT_OFF); /* no timeout */
++#endif
++}
+diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/clock.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/clock.h
+--- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/clock.h     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/clock.h       2014-09-06 16:58:35.381953139 +0200
+@@ -0,0 +1,33 @@
++/*
++ * (C) Copyright 2007-2011
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#ifndef _SUNXI_CLOCK_H
++#define _SUNXI_CLOCK_H
++
++#include <linux/types.h>
++
++#define CLK_GATE_OPEN                 0x1
++#define CLK_GATE_CLOSE                        0x0
++
++/* clock control module regs definition */
++#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I)
++#include <asm/arch/clock_sun6i.h>
++#else
++#include <asm/arch/clock_sun4i.h>
++#endif
++
++#ifndef __ASSEMBLY__
++int clock_init(void);
++int clock_twi_onoff(int port, int state);
++void clock_set_pll1(unsigned int hz);
++unsigned int clock_get_pll6(void);
++void clock_init_safe(void);
++void clock_init_uart(void);
++#endif
++
++#endif /* _SUNXI_CLOCK_H */
+diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/clock_sun4i.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
+--- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/clock_sun4i.h       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/clock_sun4i.h 2014-09-06 16:58:35.381953139 +0200
+@@ -0,0 +1,256 @@
++/*
++ * sun4i, sun5i and sun7i clock register definitions
++ *
++ * (C) Copyright 2007-2011
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#ifndef _SUNXI_CLOCK_SUN4I_H
++#define _SUNXI_CLOCK_SUN4I_H
++
++struct sunxi_ccm_reg {
++      u32 pll1_cfg;           /* 0x00 pll1 control */
++      u32 pll1_tun;           /* 0x04 pll1 tuning */
++      u32 pll2_cfg;           /* 0x08 pll2 control */
++      u32 pll2_tun;           /* 0x0c pll2 tuning */
++      u32 pll3_cfg;           /* 0x10 pll3 control */
++      u8 res0[0x4];
++      u32 pll4_cfg;           /* 0x18 pll4 control */
++      u8 res1[0x4];
++      u32 pll5_cfg;           /* 0x20 pll5 control */
++      u32 pll5_tun;           /* 0x24 pll5 tuning */
++      u32 pll6_cfg;           /* 0x28 pll6 control */
++      u32 pll6_tun;           /* 0x2c pll6 tuning */
++      u32 pll7_cfg;           /* 0x30 pll7 control */
++      u32 pll1_tun2;          /* 0x34 pll5 tuning2 */
++      u8 res2[0x4];
++      u32 pll5_tun2;          /* 0x3c pll5 tuning2 */
++      u8 res3[0xc];
++      u32 pll_lock_dbg;       /* 0x4c pll lock time debug */
++      u32 osc24m_cfg;         /* 0x50 osc24m control */
++      u32 cpu_ahb_apb0_cfg;   /* 0x54 cpu,ahb and apb0 divide ratio */
++      u32 apb1_clk_div_cfg;   /* 0x58 apb1 clock dividor */
++      u32 axi_gate;           /* 0x5c axi module clock gating */
++      u32 ahb_gate0;          /* 0x60 ahb module clock gating 0 */
++      u32 ahb_gate1;          /* 0x64 ahb module clock gating 1 */
++      u32 apb0_gate;          /* 0x68 apb0 module clock gating */
++      u32 apb1_gate;          /* 0x6c apb1 module clock gating */
++      u8 res4[0x10];
++      u32 nand_sclk_cfg;      /* 0x80 nand sub clock control */
++      u32 ms_sclk_cfg;        /* 0x84 memory stick sub clock control */
++      u32 sd0_clk_cfg;        /* 0x88 sd0 clock control */
++      u32 sd1_clk_cfg;        /* 0x8c sd1 clock control */
++      u32 sd2_clk_cfg;        /* 0x90 sd2 clock control */
++      u32 sd3_clk_cfg;        /* 0x94 sd3 clock control */
++      u32 ts_clk_cfg;         /* 0x98 transport stream clock control */
++      u32 ss_clk_cfg;         /* 0x9c */
++      u32 spi0_clk_cfg;       /* 0xa0 */
++      u32 spi1_clk_cfg;       /* 0xa4 */
++      u32 spi2_clk_cfg;       /* 0xa8 */
++      u32 pata_clk_cfg;       /* 0xac */
++      u32 ir0_clk_cfg;        /* 0xb0 */
++      u32 ir1_clk_cfg;        /* 0xb4 */
++      u32 iis_clk_cfg;        /* 0xb8 */
++      u32 ac97_clk_cfg;       /* 0xbc */
++      u32 spdif_clk_cfg;      /* 0xc0 */
++      u32 keypad_clk_cfg;     /* 0xc4 */
++      u32 sata_clk_cfg;       /* 0xc8 */
++      u32 usb_clk_cfg;        /* 0xcc */
++      u32 gps_clk_cfg;        /* 0xd0 */
++      u32 spi3_clk_cfg;       /* 0xd4 */
++      u8 res5[0x28];
++      u32 dram_clk_cfg;       /* 0x100 */
++      u32 be0_clk_cfg;        /* 0x104 */
++      u32 be1_clk_cfg;        /* 0x108 */
++      u32 fe0_clk_cfg;        /* 0x10c */
++      u32 fe1_clk_cfg;        /* 0x110 */
++      u32 mp_clk_cfg;         /* 0x114 */
++      u32 lcd0_ch0_clk_cfg;   /* 0x118 */
++      u32 lcd1_ch0_clk_cfg;   /* 0x11c */
++      u32 csi_isp_clk_cfg;    /* 0x120 */
++      u8 res6[0x4];
++      u32 tvd_clk_reg;        /* 0x128 */
++      u32 lcd0_ch1_clk_cfg;   /* 0x12c */
++      u32 lcd1_ch1_clk_cfg;   /* 0x130 */
++      u32 csi0_clk_cfg;       /* 0x134 */
++      u32 csi1_clk_cfg;       /* 0x138 */
++      u32 ve_clk_cfg;         /* 0x13c */
++      u32 audio_codec_clk_cfg;        /* 0x140 */
++      u32 avs_clk_cfg;        /* 0x144 */
++      u32 ace_clk_cfg;        /* 0x148 */
++      u32 lvds_clk_cfg;       /* 0x14c */
++      u32 hdmi_clk_cfg;       /* 0x150 */
++      u32 mali_clk_cfg;       /* 0x154 */
++      u8 res7[0x4];
++      u32 mbus_clk_cfg;       /* 0x15c */
++      u8 res8[0x4];
++      u32 gmac_clk_cfg;       /* 0x164 */
++};
++
++/* apb1 bit field */
++#define APB1_CLK_SRC_OSC24M           (0x0 << 24)
++#define APB1_CLK_SRC_PLL6             (0x1 << 24)
++#define APB1_CLK_SRC_LOSC             (0x2 << 24)
++#define APB1_CLK_SRC_MASK             (0x3 << 24)
++#define APB1_CLK_RATE_N_1             (0x0 << 16)
++#define APB1_CLK_RATE_N_2             (0x1 << 16)
++#define APB1_CLK_RATE_N_4             (0x2 << 16)
++#define APB1_CLK_RATE_N_8             (0x3 << 16)
++#define APB1_CLK_RATE_N_MASK          (3 << 16)
++#define APB1_CLK_RATE_M(m)            (((m)-1) << 0)
++#define APB1_CLK_RATE_M_MASK            (0x1f << 0)
++
++/* apb1 gate field */
++#define APB1_GATE_UART_SHIFT  (16)
++#define APB1_GATE_UART_MASK           (0xff << APB1_GATE_UART_SHIFT)
++#define APB1_GATE_TWI_SHIFT   (0)
++#define APB1_GATE_TWI_MASK            (0xf << APB1_GATE_TWI_SHIFT)
++
++/* clock divide */
++#define AXI_DIV_SHIFT         (0)
++#define AXI_DIV_1                     0
++#define AXI_DIV_2                     1
++#define AXI_DIV_3                     2
++#define AXI_DIV_4                     3
++#define AHB_DIV_SHIFT         (4)
++#define AHB_DIV_1                     0
++#define AHB_DIV_2                     1
++#define AHB_DIV_4                     2
++#define AHB_DIV_8                     3
++#define APB0_DIV_SHIFT                (8)
++#define APB0_DIV_1                    0
++#define APB0_DIV_2                    1
++#define APB0_DIV_4                    2
++#define APB0_DIV_8                    3
++#define CPU_CLK_SRC_SHIFT     (16)
++#define CPU_CLK_SRC_OSC24M            1
++#define CPU_CLK_SRC_PLL1              2
++
++#define CCM_PLL1_CFG_ENABLE_SHIFT             31
++#define CCM_PLL1_CFG_VCO_RST_SHIFT            30
++#define CCM_PLL1_CFG_VCO_BIAS_SHIFT           26
++#define CCM_PLL1_CFG_PLL4_EXCH_SHIFT          25
++#define CCM_PLL1_CFG_BIAS_CUR_SHIFT           20
++#define CCM_PLL1_CFG_DIVP_SHIFT                       16
++#define CCM_PLL1_CFG_LCK_TMR_SHIFT            13
++#define CCM_PLL1_CFG_FACTOR_N_SHIFT           8
++#define CCM_PLL1_CFG_FACTOR_K_SHIFT           4
++#define CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT    3
++#define CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT    2
++#define CCM_PLL1_CFG_FACTOR_M_SHIFT           0
++
++#define PLL1_CFG_DEFAULT      0xa1005000
++
++#define PLL6_CFG_DEFAULT      0xa1009911
++
++/* nand clock */
++#define NAND_CLK_SRC_OSC24            0
++#define NAND_CLK_DIV_N                        0
++#define NAND_CLK_DIV_M                        0
++
++/* gps clock */
++#define GPS_SCLK_GATING_OFF           0
++#define GPS_RESET                     0
++
++/* ahb clock gate bit offset */
++#define AHB_GATE_OFFSET_GPS           26
++#define AHB_GATE_OFFSET_SATA          25
++#define AHB_GATE_OFFSET_PATA          24
++#define AHB_GATE_OFFSET_SPI3          23
++#define AHB_GATE_OFFSET_SPI2          22
++#define AHB_GATE_OFFSET_SPI1          21
++#define AHB_GATE_OFFSET_SPI0          20
++#define AHB_GATE_OFFSET_TS0           18
++#define AHB_GATE_OFFSET_EMAC          17
++#define AHB_GATE_OFFSET_ACE           16
++#define AHB_GATE_OFFSET_DLL           15
++#define AHB_GATE_OFFSET_SDRAM         14
++#define AHB_GATE_OFFSET_NAND          13
++#define AHB_GATE_OFFSET_MS            12
++#define AHB_GATE_OFFSET_MMC3          11
++#define AHB_GATE_OFFSET_MMC2          10
++#define AHB_GATE_OFFSET_MMC1          9
++#define AHB_GATE_OFFSET_MMC0          8
++#define AHB_GATE_OFFSET_MMC(n)                (AHB_GATE_OFFSET_MMC0 + (n))
++#define AHB_GATE_OFFSET_BIST          7
++#define AHB_GATE_OFFSET_DMA           6
++#define AHB_GATE_OFFSET_SS            5
++#define AHB_GATE_OFFSET_USB_OHCI1     4
++#define AHB_GATE_OFFSET_USB_EHCI1     3
++#define AHB_GATE_OFFSET_USB_OHCI0     2
++#define AHB_GATE_OFFSET_USB_EHCI0     1
++#define AHB_GATE_OFFSET_USB           0
++
++/* ahb clock gate bit offset (second register) */
++#define AHB_GATE_OFFSET_GMAC          17
++
++#define CCM_AHB_GATE_GPS (0x1 << 26)
++#define CCM_AHB_GATE_SDRAM (0x1 << 14)
++#define CCM_AHB_GATE_DLL (0x1 << 15)
++#define CCM_AHB_GATE_ACE (0x1 << 16)
++
++#define CCM_PLL5_CTRL_M(n) (((n) & 0x3) << 0)
++#define CCM_PLL5_CTRL_M_MASK CCM_PLL5_CTRL_M(0x3)
++#define CCM_PLL5_CTRL_M_X(n) ((n) - 1)
++#define CCM_PLL5_CTRL_M1(n) (((n) & 0x3) << 2)
++#define CCM_PLL5_CTRL_M1_MASK CCM_PLL5_CTRL_M1(0x3)
++#define CCM_PLL5_CTRL_M1_X(n) ((n) - 1)
++#define CCM_PLL5_CTRL_K(n) (((n) & 0x3) << 4)
++#define CCM_PLL5_CTRL_K_MASK CCM_PLL5_CTRL_K(0x3)
++#define CCM_PLL5_CTRL_K_X(n) ((n) - 1)
++#define CCM_PLL5_CTRL_LDO (0x1 << 7)
++#define CCM_PLL5_CTRL_N(n) (((n) & 0x1f) << 8)
++#define CCM_PLL5_CTRL_N_MASK CCM_PLL5_CTRL_N(0x1f)
++#define CCM_PLL5_CTRL_N_X(n) (n)
++#define CCM_PLL5_CTRL_P(n) (((n) & 0x3) << 16)
++#define CCM_PLL5_CTRL_P_MASK CCM_PLL5_CTRL_P(0x3)
++#define CCM_PLL5_CTRL_P_X(n) ((n) - 1)
++#define CCM_PLL5_CTRL_BW (0x1 << 18)
++#define CCM_PLL5_CTRL_VCO_GAIN (0x1 << 19)
++#define CCM_PLL5_CTRL_BIAS(n) (((n) & 0x1f) << 20)
++#define CCM_PLL5_CTRL_BIAS_MASK CCM_PLL5_CTRL_BIAS(0x1f)
++#define CCM_PLL5_CTRL_BIAS_X(n) ((n) - 1)
++#define CCM_PLL5_CTRL_VCO_BIAS (0x1 << 25)
++#define CCM_PLL5_CTRL_DDR_CLK (0x1 << 29)
++#define CCM_PLL5_CTRL_BYPASS (0x1 << 30)
++#define CCM_PLL5_CTRL_EN (0x1 << 31)
++
++#define CCM_PLL6_CTRL_N_SHIFT 8
++#define CCM_PLL6_CTRL_N_MASK  (0x1f << CCM_PLL6_CTRL_N_SHIFT)
++#define CCM_PLL6_CTRL_K_SHIFT 4
++#define CCM_PLL6_CTRL_K_MASK  (0x3 << CCM_PLL6_CTRL_K_SHIFT)
++
++#define CCM_GPS_CTRL_RESET (0x1 << 0)
++#define CCM_GPS_CTRL_GATE (0x1 << 1)
++
++#define CCM_DRAM_CTRL_DCLK_OUT (0x1 << 15)
++
++#define CCM_MBUS_CTRL_M(n) (((n) & 0xf) << 0)
++#define CCM_MBUS_CTRL_M_MASK CCM_MBUS_CTRL_M(0xf)
++#define CCM_MBUS_CTRL_M_X(n) ((n) - 1)
++#define CCM_MBUS_CTRL_N(n) (((n) & 0xf) << 16)
++#define CCM_MBUS_CTRL_N_MASK CCM_MBUS_CTRL_N(0xf)
++#define CCM_MBUS_CTRL_N_X(n) (((n) >> 3) ? 3 : (((n) >> 2) ? 2 : (((n) >> 1) ? 1 : 0)))
++#define CCM_MBUS_CTRL_CLK_SRC(n) (((n) & 0x3) << 24)
++#define CCM_MBUS_CTRL_CLK_SRC_MASK CCM_MBUS_CTRL_CLK_SRC(0x3)
++#define CCM_MBUS_CTRL_CLK_SRC_HOSC 0x0
++#define CCM_MBUS_CTRL_CLK_SRC_PLL6 0x1
++#define CCM_MBUS_CTRL_CLK_SRC_PLL5 0x2
++#define CCM_MBUS_CTRL_GATE (0x1 << 31)
++
++#define CCM_MMC_CTRL_OSCM24 (0x0 << 24)
++#define CCM_MMC_CTRL_PLL6   (0x1 << 24)
++#define CCM_MMC_CTRL_PLL5   (0x2 << 24)
++
++#define CCM_MMC_CTRL_ENABLE (0x1 << 31)
++
++#define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0
++#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1
++#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2
++#define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2)
++#define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2)
++
++#endif /* _SUNXI_CLOCK_SUN4I_H */
+diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/clock_sun6i.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
+--- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/clock_sun6i.h       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/clock_sun6i.h 2014-09-06 16:58:35.381953139 +0200
+@@ -0,0 +1,205 @@
++/*
++ * sun6i clock register definitions
++ *
++ * (C) Copyright 2007-2011
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#ifndef _SUNXI_CLOCK_SUN6I_H
++#define _SUNXI_CLOCK_SUN6I_H
++
++struct sunxi_ccm_reg {
++      u32 pll1_cfg;           /* 0x00 pll1 control */
++      u32 reserved0;
++      u32 pll2_cfg;           /* 0x08 pll2 control */
++      u32 reserved1;
++      u32 pll3_cfg;           /* 0x10 pll3 control */
++      u32 reserved2;
++      u32 pll4_cfg;           /* 0x18 pll4 control */
++      u32 reserved3;
++      u32 pll5_cfg;           /* 0x20 pll5 control */
++      u32 reserved4;
++      u32 pll6_cfg;           /* 0x28 pll6 control */
++      u32 reserved5;
++      u32 pll7_cfg;           /* 0x30 pll7 control */
++      u32 reserved6;
++      u32 pll8_cfg;           /* 0x38 pll8 control */
++      u32 reserved7;
++      u32 mipi_pll_cfg;       /* 0x40 MIPI pll control */
++      u32 pll9_cfg;           /* 0x44 pll9 control */
++      u32 pll10_cfg;          /* 0x48 pll10 control */
++      u32 reserved8;
++      u32 cpu_axi_cfg;        /* 0x50 CPU/AXI divide ratio */
++      u32 ahb1_apb1_div;      /* 0x54 AHB1/APB1 divide ratio */
++      u32 apb2_div;           /* 0x58 APB2 divide ratio */
++      u32 axi_gate;           /* 0x5c axi module clock gating */
++      u32 ahb_gate0;          /* 0x60 ahb module clock gating 0 */
++      u32 ahb_gate1;          /* 0x64 ahb module clock gating 1 */
++      u32 apb1_gate;          /* 0x68 apb1 module clock gating */
++      u32 apb2_gate;          /* 0x6c apb2 module clock gating */
++      u32 reserved9[4];
++      u32 nand0_clk_cfg;      /* 0x80 nand0 clock control */
++      u32 nand1_clk_cfg;      /* 0x84 nand1 clock control */
++      u32 sd0_clk_cfg;        /* 0x88 sd0 clock control */
++      u32 sd1_clk_cfg;        /* 0x8c sd1 clock control */
++      u32 sd2_clk_cfg;        /* 0x90 sd2 clock control */
++      u32 sd3_clk_cfg;        /* 0x94 sd3 clock control */
++      u32 ts_clk_cfg;         /* 0x98 transport stream clock control */
++      u32 ss_clk_cfg;         /* 0x9c security system clock control */
++      u32 spi0_clk_cfg;       /* 0xa0 spi0 clock control */
++      u32 spi1_clk_cfg;       /* 0xa4 spi1 clock control */
++      u32 spi2_clk_cfg;       /* 0xa8 spi2 clock control */
++      u32 spi3_clk_cfg;       /* 0xac spi3 clock control */
++      u32 i2s0_clk_cfg;       /* 0xb0 I2S0 clock control*/
++      u32 i2s1_clk_cfg;       /* 0xb4 I2S1 clock control */
++      u32 reserved10[2];
++      u32 spdif_clk_cfg;      /* 0xc0 SPDIF clock control */
++      u32 reserved11[2];
++      u32 usb_clk_cfg;        /* 0xcc USB clock control */
++      u32 gmac_clk_cfg;       /* 0xd0 GMAC clock control */
++      u32 reserved12[7];
++      u32 mdfs_clk_cfg;       /* 0xf0 MDFS clock control */
++      u32 dram_clk_cfg;       /* 0xf4 DRAM configuration clock control */
++      u32 reserved13[2];
++      u32 dram_clk_gate;      /* 0x100 DRAM module gating */
++      u32 be0_clk_cfg;        /* 0x104 BE0 module clock */
++      u32 be1_clk_cfg;        /* 0x108 BE1 module clock */
++      u32 fe0_clk_cfg;        /* 0x10c FE0 module clock */
++      u32 fe1_clk_cfg;        /* 0x110 FE1 module clock */
++      u32 mp_clk_cfg;         /* 0x114 MP module clock */
++      u32 lcd0_ch0_clk_cfg;   /* 0x118 LCD0 CH0 module clock */
++      u32 lcd1_ch0_clk_cfg;   /* 0x11c LCD1 CH0 module clock */
++      u32 reserved14[3];
++      u32 lcd0_ch1_clk_cfg;   /* 0x12c LCD0 CH1 module clock */
++      u32 lcd1_ch1_clk_cfg;   /* 0x130 LCD1 CH1 module clock */
++      u32 csi0_clk_cfg;       /* 0x134 CSI0 module clock */
++      u32 csi1_clk_cfg;       /* 0x138 CSI1 module clock */
++      u32 ve_clk_cfg;         /* 0x13c VE module clock */
++      u32 adda_clk_cfg;       /* 0x140 ADDA module clock */
++      u32 avs_clk_cfg;        /* 0x144 AVS module clock */
++      u32 dmic_clk_cfg;       /* 0x148 Digital Mic module clock*/
++      u32 reserved15;
++      u32 hdmi_clk_cfg;       /* 0x150 HDMI module clock */
++      u32 ps_clk_cfg;         /* 0x154 PS module clock */
++      u32 mtc_clk_cfg;        /* 0x158 MTC module clock */
++      u32 mbus0_clk_cfg;      /* 0x15c MBUS0 module clock */
++      u32 mbus1_clk_cfg;      /* 0x160 MBUS1 module clock */
++      u32 reserved16;
++      u32 mipi_dsi_clk_cfg;   /* 0x168 MIPI DSI clock control */
++      u32 mipi_csi_clk_cfg;   /* 0x16c MIPI CSI clock control */
++      u32 reserved17[4];
++      u32 iep_drc0_clk_cfg;   /* 0x180 IEP DRC0 module clock */
++      u32 iep_drc1_clk_cfg;   /* 0x184 IEP DRC1 module clock */
++      u32 iep_deu0_clk_cfg;   /* 0x188 IEP DEU0 module clock */
++      u32 iep_deu1_clk_cfg;   /* 0x18c IEP DEU1 module clock */
++      u32 reserved18[4];
++      u32 gpu_core_clk_cfg;   /* 0x1a0 GPU core clock config */
++      u32 gpu_mem_clk_cfg;    /* 0x1a4 GPU memory clock config */
++      u32 gpu_hyd_clk_cfg;    /* 0x1a0 GPU HYD clock config */
++      u32 reserved19[21];
++      u32 pll_lock;           /* 0x200 PLL Lock Time */
++      u32 pll1_lock;          /* 0x204 PLL1 Lock Time */
++      u32 reserved20[6];
++      u32 pll1_bias_cfg;      /* 0x220 PLL1 Bias config */
++      u32 pll2_bias_cfg;      /* 0x224 PLL2 Bias config */
++      u32 pll3_bias_cfg;      /* 0x228 PLL3 Bias config */
++      u32 pll4_bias_cfg;      /* 0x22c PLL4 Bias config */
++      u32 pll5_bias_cfg;      /* 0x230 PLL5 Bias config */
++      u32 pll6_bias_cfg;      /* 0x234 PLL6 Bias config */
++      u32 pll7_bias_cfg;      /* 0x238 PLL7 Bias config */
++      u32 pll8_bias_cfg;      /* 0x23c PLL8 Bias config */
++      u32 mipi_bias_cfg;      /* 0x240 MIPI Bias config */
++      u32 pll9_bias_cfg;      /* 0x244 PLL9 Bias config */
++      u32 pll10_bias_cfg;     /* 0x248 PLL10 Bias config */
++      u32 reserved21[13];
++      u32 pll1_pattern_cfg;   /* 0x280 PLL1 Pattern config */
++      u32 pll2_pattern_cfg;   /* 0x284 PLL2 Pattern config */
++      u32 pll3_pattern_cfg;   /* 0x288 PLL3 Pattern config */
++      u32 pll4_pattern_cfg;   /* 0x28c PLL4 Pattern config */
++      u32 pll5_pattern_cfg;   /* 0x290 PLL5 Pattern config */
++      u32 pll6_pattern_cfg;   /* 0x294 PLL6 Pattern config */
++      u32 pll7_pattern_cfg;   /* 0x298 PLL7 Pattern config */
++      u32 pll8_pattern_cfg;   /* 0x29c PLL8 Pattern config */
++      u32 mipi_pattern_cfg;   /* 0x2a0 MIPI Pattern config */
++      u32 pll9_pattern_cfg;   /* 0x2a4 PLL9 Pattern config */
++      u32 pll10_pattern_cfg;  /* 0x2a8 PLL10 Pattern config */
++      u32 reserved22[5];
++      u32 ahb_reset0_cfg;     /* 0x2c0 AHB1 Reset 0 config */
++      u32 ahb_reset1_cfg;     /* 0x2c4 AHB1 Reset 1 config */
++      u32 ahb_reset2_cfg;     /* 0x2c8 AHB1 Reset 2 config */
++      u32 reserved23;
++      u32 apb1_reset_cfg;     /* 0x2d0 APB1 Reset config */
++      u32 reserved24;
++      u32 apb2_reset_cfg;     /* 0x2d8 APB2 Reset config */
++};
++
++/* apb2 bit field */
++#define APB2_CLK_SRC_LOSC             (0x0 << 24)
++#define APB2_CLK_SRC_OSC24M           (0x1 << 24)
++#define APB2_CLK_SRC_PLL6             (0x2 << 24)
++#define APB2_CLK_SRC_MASK             (0x3 << 24)
++#define APB2_CLK_RATE_N_1             (0x0 << 16)
++#define APB2_CLK_RATE_N_2             (0x1 << 16)
++#define APB2_CLK_RATE_N_4             (0x2 << 16)
++#define APB2_CLK_RATE_N_8             (0x3 << 16)
++#define APB2_CLK_RATE_N_MASK          (3 << 16)
++#define APB2_CLK_RATE_M(m)            (((m)-1) << 0)
++#define APB2_CLK_RATE_M_MASK            (0x1f << 0)
++
++/* apb2 gate field */
++#define APB2_GATE_UART_SHIFT  (16)
++#define APB2_GATE_UART_MASK           (0xff << APB2_GATE_UART_SHIFT)
++#define APB2_GATE_TWI_SHIFT   (0)
++#define APB2_GATE_TWI_MASK            (0xf << APB2_GATE_TWI_SHIFT)
++
++/* cpu_axi_cfg bits */
++#define AXI_DIV_SHIFT                 0
++#define ATB_DIV_SHIFT                 8
++#define CPU_CLK_SRC_SHIFT             16
++
++#define AXI_DIV_1                     0
++#define AXI_DIV_2                     1
++#define AXI_DIV_3                     2
++#define AXI_DIV_4                     3
++#define ATB_DIV_1                     0
++#define ATB_DIV_2                     1
++#define ATB_DIV_4                     2
++#define CPU_CLK_SRC_OSC24M            1
++#define CPU_CLK_SRC_PLL1              2
++
++#define PLL1_CFG_DEFAULT              0x90011b21
++
++#define PLL6_CFG_DEFAULT              0x90041811
++
++#define CCM_PLL6_CTRL_N_SHIFT         8
++#define CCM_PLL6_CTRL_N_MASK          (0x1f << CCM_PLL6_CTRL_N_SHIFT)
++#define CCM_PLL6_CTRL_K_SHIFT         4
++#define CCM_PLL6_CTRL_K_MASK          (0x3 << CCM_PLL6_CTRL_K_SHIFT)
++
++#define AHB_GATE_OFFSET_MMC3          11
++#define AHB_GATE_OFFSET_MMC2          10
++#define AHB_GATE_OFFSET_MMC1          9
++#define AHB_GATE_OFFSET_MMC0          8
++#define AHB_GATE_OFFSET_MMC(n)                (AHB_GATE_OFFSET_MMC0 + (n))
++
++#define CCM_MMC_CTRL_OSCM24 (0x0 << 24)
++#define CCM_MMC_CTRL_PLL6   (0x1 << 24)
++
++#define CCM_MMC_CTRL_ENABLE (0x1 << 31)
++
++#define AHB_RESET_OFFSET_MMC3         11
++#define AHB_RESET_OFFSET_MMC2         10
++#define AHB_RESET_OFFSET_MMC1         9
++#define AHB_RESET_OFFSET_MMC0         8
++#define AHB_RESET_OFFSET_MMC(n)               (AHB_RESET_OFFSET_MMC0 + (n))
++
++/* apb2 reset */
++#define APB2_RESET_UART_SHIFT         (16)
++#define APB2_RESET_UART_MASK          (0xff << APB2_RESET_UART_SHIFT)
++#define APB2_RESET_TWI_SHIFT          (0)
++#define APB2_RESET_TWI_MASK           (0xf << APB2_RESET_TWI_SHIFT)
++
++#endif /* _SUNXI_CLOCK_SUN6I_H */
+diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/cpucfg.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/cpucfg.h
+--- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/cpucfg.h    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/cpucfg.h      2014-09-06 16:58:35.381953139 +0200
+@@ -0,0 +1,55 @@
++/*
++ * (C) Copyright 2013
++ * Carl van Schaik <carl@ok-labs.com>
++ *
++ * CPU configuration registers for the sun7i (A20).
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#ifndef _SUNXI_CPUCFG_H_
++#define _SUNXI_CPUCFG_H_
++
++#ifndef __ASSEMBLY__
++
++struct sunxi_cpu_ctrl {
++      u32 reset_ctrl;
++      u32 cpu_ctrl;
++      u32 status;
++      u32 _res[13];
++};
++
++#define CPU_RESET_SET 0
++#define CPU_RESET_CLEAR       3
++
++#define CPU_STATUS_SMP        (1 << 0)
++#define CPU_STATUS_WFE        (1 << 1)
++#define CPU_STATUS_WFI        (1 << 2)
++
++struct sunxi_cpucfg {
++      u32 _res1[16];                  /* 0x000 */
++      struct sunxi_cpu_ctrl cpu[2];   /* 0x040 */
++      u32 _res2[48];                  /* 0x0c0 */
++      u32 _res3;                      /* 0x180 */
++      u32 general_ctrl;               /* 0x184 */
++      u32 _res4[2];                   /* 0x188 */
++      u32 event_input;                /* 0x190 */
++      u32 _res5[4];                   /* 0x194 */
++      u32 boot_addr;                  /* 0x1a4 - also known as PRIVATE_REG */
++      u32 _res6[2];                   /* 0x1a8 */
++      u32 cpu1_power_clamp;           /* 0x1b0 */
++      u32 cpu1_power_off;             /* 0x1b4 */
++      u32 _res7[10];                  /* 0x1b8 */
++      u32 debug0_ctrl;                /* 0x1e0 */
++      u32 debug1_ctrl;                /* 0x1e4 */
++};
++
++#define GENERAL_CTRL_NO_L1_RESET_CPU(x)       (1UL << (x))
++#define GENERAL_CTRL_NO_L2_AUTO_RESET (1UL << 4)
++#define GENERAL_CTRL_L2_RESET_SET     (0UL << 5)
++#define GENERAL_CTRL_L2_RESET_CLEAR   (1UL << 5)
++#define GENERAL_CTRL_CFGSDISABLE      (1UL << 8)
++
++#endif /* __ASSEMBLY__ */
++
++#endif /* _SUNXI_CPUCFG_H_ */
+diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/cpu.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/cpu.h
+--- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/cpu.h       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/cpu.h 2014-09-06 16:58:35.381953139 +0200
+@@ -0,0 +1,141 @@
++/*
++ * (C) Copyright 2007-2011
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#ifndef _SUNXI_CPU_H
++#define _SUNXI_CPU_H
++
++#define SUNXI_SRAM_A1_BASE            0x00000000
++#define SUNXI_SRAM_A1_SIZE            (16 * 1024)     /* 16 kiB */
++
++#define SUNXI_SRAM_A2_BASE            0x00004000      /* 16 kiB */
++#define SUNXI_SRAM_A3_BASE            0x00008000      /* 13 kiB */
++#define SUNXI_SRAM_A4_BASE            0x0000b400      /* 3 kiB */
++#define SUNXI_SRAM_D_BASE             0x00010000      /* 4 kiB */
++#define SUNXI_SRAM_B_BASE             0x00020000      /* 64 kiB (secure) */
++
++#define SUNXI_SRAMC_BASE              0x01c00000
++#define SUNXI_DRAMC_BASE              0x01c01000
++#define SUNXI_DMA_BASE                        0x01c02000
++#define SUNXI_NFC_BASE                        0x01c03000
++#define SUNXI_TS_BASE                 0x01c04000
++#define SUNXI_SPI0_BASE                       0x01c05000
++#define SUNXI_SPI1_BASE                       0x01c06000
++#define SUNXI_MS_BASE                 0x01c07000
++#define SUNXI_TVD_BASE                        0x01c08000
++#define SUNXI_CSI0_BASE                       0x01c09000
++#define SUNXI_TVE0_BASE                       0x01c0a000
++#define SUNXI_EMAC_BASE                       0x01c0b000
++#define SUNXI_LCD0_BASE                       0x01c0C000
++#define SUNXI_LCD1_BASE                       0x01c0d000
++#define SUNXI_VE_BASE                 0x01c0e000
++#define SUNXI_MMC0_BASE                       0x01c0f000
++#define SUNXI_MMC1_BASE                       0x01c10000
++#define SUNXI_MMC2_BASE                       0x01c11000
++#define SUNXI_MMC3_BASE                       0x01c12000
++#define SUNXI_USB0_BASE                       0x01c13000
++#define SUNXI_USB1_BASE                       0x01c14000
++#define SUNXI_SS_BASE                 0x01c15000
++#define SUNXI_HDMI_BASE                       0x01c16000
++#define SUNXI_SPI2_BASE                       0x01c17000
++#define SUNXI_SATA_BASE                       0x01c18000
++#define SUNXI_PATA_BASE                       0x01c19000
++#define SUNXI_ACE_BASE                        0x01c1a000
++#define SUNXI_TVE1_BASE                       0x01c1b000
++#define SUNXI_USB2_BASE                       0x01c1c000
++#define SUNXI_CSI1_BASE                       0x01c1d000
++#define SUNXI_TZASC_BASE              0x01c1e000
++#define SUNXI_SPI3_BASE                       0x01c1f000
++
++#define SUNXI_CCM_BASE                        0x01c20000
++#define SUNXI_INTC_BASE                       0x01c20400
++#define SUNXI_PIO_BASE                        0x01c20800
++#define SUNXI_TIMER_BASE              0x01c20c00
++#define SUNXI_SPDIF_BASE              0x01c21000
++#define SUNXI_AC97_BASE                       0x01c21400
++#define SUNXI_IR0_BASE                        0x01c21800
++#define SUNXI_IR1_BASE                        0x01c21c00
++
++#define SUNXI_IIS_BASE                        0x01c22400
++#define SUNXI_LRADC_BASE              0x01c22800
++#define SUNXI_AD_DA_BASE              0x01c22c00
++#define SUNXI_KEYPAD_BASE             0x01c23000
++#define SUNXI_TZPC_BASE                       0x01c23400
++#define SUNXI_SID_BASE                        0x01c23800
++#define SUNXI_SJTAG_BASE              0x01c23c00
++
++#define SUNXI_TP_BASE                 0x01c25000
++#define SUNXI_PMU_BASE                        0x01c25400
++#define SUNXI_CPUCFG_BASE             0x01c25c00      /* sun7i only ? */
++
++#define SUNXI_UART0_BASE              0x01c28000
++#define SUNXI_UART1_BASE              0x01c28400
++#define SUNXI_UART2_BASE              0x01c28800
++#define SUNXI_UART3_BASE              0x01c28c00
++#define SUNXI_UART4_BASE              0x01c29000
++#define SUNXI_UART5_BASE              0x01c29400
++#define SUNXI_UART6_BASE              0x01c29800
++#define SUNXI_UART7_BASE              0x01c29c00
++#define SUNXI_PS2_0_BASE              0x01c2a000
++#define SUNXI_PS2_1_BASE              0x01c2a400
++
++#define SUNXI_TWI0_BASE                       0x01c2ac00
++#define SUNXI_TWI1_BASE                       0x01c2b000
++#define SUNXI_TWI2_BASE                       0x01c2b400
++
++#define SUNXI_CAN_BASE                        0x01c2bc00
++
++#define SUNXI_SCR_BASE                        0x01c2c400
++
++#define SUNXI_GPS_BASE                        0x01c30000
++#define SUNXI_MALI400_BASE            0x01c40000
++#define SUNXI_GMAC_BASE                       0x01c50000
++
++#define SUNXI_DRAM_COM_BASE           0x01c62000
++#define SUNXI_DRAM_CTL_BASE           0x01c63000
++#define SUNXI_DRAM_PHY_CH1_BASE               0x01c65000
++#define SUNXI_DRAM_PHY_CH2_BASE               0x01c66000
++
++/* module sram */
++#define SUNXI_SRAM_C_BASE             0x01d00000
++
++#define SUNXI_DE_FE0_BASE             0x01e00000
++#define SUNXI_DE_FE1_BASE             0x01e20000
++#define SUNXI_DE_BE0_BASE             0x01e60000
++#define SUNXI_DE_BE1_BASE             0x01e40000
++#define SUNXI_MP_BASE                 0x01e80000
++#define SUNXI_AVG_BASE                        0x01ea0000
++
++#define SUNXI_PRCM_BASE                       0x01f01400
++#define SUNXI_R_UART_BASE             0x01f02800
++#define SUNXI_R_PIO_BASE              0x01f02c00
++#define SUNXI_P2WI_BASE                       0x01f03400
++
++/* CoreSight Debug Module */
++#define SUNXI_CSDM_BASE                       0x3f500000
++
++#define SUNXI_DDRII_DDRIII_BASE               0x40000000      /* 2 GiB */
++
++#define SUNXI_BROM_BASE                       0xffff0000      /* 32 kiB */
++
++#define SUNXI_CPU_CFG                 (SUNXI_TIMER_BASE + 0x13c)
++
++#ifndef __ASSEMBLY__
++/* boot type */
++enum sunxi_boot_type_t {
++      SUNXI_BOOT_TYPE_NULL,
++      SUNXI_BOOT_TYPE_MMC0,
++      SUNXI_BOOT_TYPE_NAND,
++      SUNXI_BOOT_TYPE_MMC2,
++      SUNXI_BOOT_TYPE_SPI
++};
++
++void sunxi_board_init(void);
++void sunxi_reset(void);
++#endif /* __ASSEMBLY__ */
++
++#endif /* _CPU_H */
+diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/dram.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/dram.h
+--- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/dram.h      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/dram.h        2014-09-06 16:58:35.381953139 +0200
+@@ -0,0 +1,179 @@
++/*
++ * (C) Copyright 2007-2012
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Berg Xing <bergxing@allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * Sunxi platform dram register definition.
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#ifndef _SUNXI_DRAM_H
++#define _SUNXI_DRAM_H
++
++#include <linux/types.h>
++
++struct sunxi_dram_reg {
++      u32 ccr;                /* 0x00 controller configuration register */
++      u32 dcr;                /* 0x04 dram configuration register */
++      u32 iocr;               /* 0x08 i/o configuration register */
++      u32 csr;                /* 0x0c controller status register */
++      u32 drr;                /* 0x10 dram refresh register */
++      u32 tpr0;               /* 0x14 dram timing parameters register 0 */
++      u32 tpr1;               /* 0x18 dram timing parameters register 1 */
++      u32 tpr2;               /* 0x1c dram timing parameters register 2 */
++      u32 gdllcr;             /* 0x20 global dll control register */
++      u8 res0[0x28];
++      u32 rslr0;              /* 0x4c rank system latency register */
++      u32 rslr1;              /* 0x50 rank system latency register */
++      u8 res1[0x8];
++      u32 rdgr0;              /* 0x5c rank dqs gating register */
++      u32 rdgr1;              /* 0x60 rank dqs gating register */
++      u8 res2[0x34];
++      u32 odtcr;              /* 0x98 odt configuration register */
++      u32 dtr0;               /* 0x9c data training register 0 */
++      u32 dtr1;               /* 0xa0 data training register 1 */
++      u32 dtar;               /* 0xa4 data training address register */
++      u32 zqcr0;              /* 0xa8 zq control register 0 */
++      u32 zqcr1;              /* 0xac zq control register 1 */
++      u32 zqsr;               /* 0xb0 zq status register */
++      u32 idcr;               /* 0xb4 initializaton delay configure reg */
++      u8 res3[0x138];
++      u32 mr;                 /* 0x1f0 mode register */
++      u32 emr;                /* 0x1f4 extended mode register */
++      u32 emr2;               /* 0x1f8 extended mode register */
++      u32 emr3;               /* 0x1fc extended mode register */
++      u32 dllctr;             /* 0x200 dll control register */
++      u32 dllcr[5];           /* 0x204 dll control register 0(byte 0) */
++      /* 0x208 dll control register 1(byte 1) */
++      /* 0x20c dll control register 2(byte 2) */
++      /* 0x210 dll control register 3(byte 3) */
++      /* 0x214 dll control register 4(byte 4) */
++      u32 dqtr0;              /* 0x218 dq timing register */
++      u32 dqtr1;              /* 0x21c dq timing register */
++      u32 dqtr2;              /* 0x220 dq timing register */
++      u32 dqtr3;              /* 0x224 dq timing register */
++      u32 dqstr;              /* 0x228 dqs timing register */
++      u32 dqsbtr;             /* 0x22c dqsb timing register */
++      u32 mcr;                /* 0x230 mode configure register */
++      u8 res[0x8];
++      u32 ppwrsctl;           /* 0x23c pad power save control */
++      u32 apr;                /* 0x240 arbiter period register */
++      u32 pldtr;              /* 0x244 priority level data threshold reg */
++      u8 res5[0x8];
++      u32 hpcr[32];           /* 0x250 host port configure register */
++      u8 res6[0x10];
++      u32 csel;               /* 0x2e0 controller select register */
++};
++
++struct dram_para {
++      u32 clock;
++      u32 type;
++      u32 rank_num;
++      u32 density;
++      u32 io_width;
++      u32 bus_width;
++      u32 cas;
++      u32 zq;
++      u32 odt_en;
++      u32 size;
++      u32 tpr0;
++      u32 tpr1;
++      u32 tpr2;
++      u32 tpr3;
++      u32 tpr4;
++      u32 tpr5;
++      u32 emr1;
++      u32 emr2;
++      u32 emr3;
++};
++
++#define DRAM_CCR_COMMAND_RATE_1T (0x1 << 5)
++#define DRAM_CCR_DQS_GATE (0x1 << 14)
++#define DRAM_CCR_DQS_DRIFT_COMP (0x1 << 17)
++#define DRAM_CCR_ITM_OFF (0x1 << 28)
++#define DRAM_CCR_DATA_TRAINING (0x1 << 30)
++#define DRAM_CCR_INIT (0x1 << 31)
++
++#define DRAM_MEMORY_TYPE_DDR1 1
++#define DRAM_MEMORY_TYPE_DDR2 2
++#define DRAM_MEMORY_TYPE_DDR3 3
++#define DRAM_MEMORY_TYPE_LPDDR2 4
++#define DRAM_MEMORY_TYPE_LPDDR 5
++#define DRAM_DCR_TYPE (0x1 << 0)
++#define DRAM_DCR_TYPE_DDR2 0x0
++#define DRAM_DCR_TYPE_DDR3 0x1
++#define DRAM_DCR_IO_WIDTH(n) (((n) & 0x3) << 1)
++#define DRAM_DCR_IO_WIDTH_MASK DRAM_DCR_IO_WIDTH(0x3)
++#define DRAM_DCR_IO_WIDTH_8BIT 0x0
++#define DRAM_DCR_IO_WIDTH_16BIT 0x1
++#define DRAM_DCR_CHIP_DENSITY(n) (((n) & 0x7) << 3)
++#define DRAM_DCR_CHIP_DENSITY_MASK DRAM_DCR_CHIP_DENSITY(0x7)
++#define DRAM_DCR_CHIP_DENSITY_256M 0x0
++#define DRAM_DCR_CHIP_DENSITY_512M 0x1
++#define DRAM_DCR_CHIP_DENSITY_1024M 0x2
++#define DRAM_DCR_CHIP_DENSITY_2048M 0x3
++#define DRAM_DCR_CHIP_DENSITY_4096M 0x4
++#define DRAM_DCR_CHIP_DENSITY_8192M 0x5
++#define DRAM_DCR_BUS_WIDTH(n) (((n) & 0x7) << 6)
++#define DRAM_DCR_BUS_WIDTH_MASK DRAM_DCR_BUS_WIDTH(0x7)
++#define DRAM_DCR_BUS_WIDTH_32BIT 0x3
++#define DRAM_DCR_BUS_WIDTH_16BIT 0x1
++#define DRAM_DCR_BUS_WIDTH_8BIT 0x0
++#define DRAM_DCR_NR_DLLCR_32BIT 5
++#define DRAM_DCR_NR_DLLCR_16BIT 3
++#define DRAM_DCR_NR_DLLCR_8BIT 2
++#define DRAM_DCR_RANK_SEL(n) (((n) & 0x3) << 10)
++#define DRAM_DCR_RANK_SEL_MASK DRAM_DCR_CMD_RANK(0x3)
++#define DRAM_DCR_CMD_RANK_ALL (0x1 << 12)
++#define DRAM_DCR_MODE(n) (((n) & 0x3) << 13)
++#define DRAM_DCR_MODE_MASK DRAM_DCR_MODE(0x3)
++#define DRAM_DCR_MODE_SEQ 0x0
++#define DRAM_DCR_MODE_INTERLEAVE 0x1
++
++#define DRAM_CSR_FAILED (0x1 << 20)
++
++#define DRAM_DRR_TRFC(n) ((n) & 0xff)
++#define DRAM_DRR_TREFI(n) (((n) & 0xffff) << 8)
++#define DRAM_DRR_BURST(n) ((((n) - 1) & 0xf) << 24)
++
++#define DRAM_MCR_MODE_NORM(n) (((n) & 0x3) << 0)
++#define DRAM_MCR_MODE_NORM_MASK DRAM_MCR_MOD_NORM(0x3)
++#define DRAM_MCR_MODE_DQ_OUT(n) (((n) & 0x3) << 2)
++#define DRAM_MCR_MODE_DQ_OUT_MASK DRAM_MCR_MODE_DQ_OUT(0x3)
++#define DRAM_MCR_MODE_ADDR_OUT(n) (((n) & 0x3) << 4)
++#define DRAM_MCR_MODE_ADDR_OUT_MASK DRAM_MCR_MODE_ADDR_OUT(0x3)
++#define DRAM_MCR_MODE_DQ_IN_OUT(n) (((n) & 0x3) << 6)
++#define DRAM_MCR_MODE_DQ_IN_OUT_MASK DRAM_MCR_MODE_DQ_IN_OUT(0x3)
++#define DRAM_MCR_MODE_DQ_TURNON_DELAY(n) (((n) & 0x7) << 8)
++#define DRAM_MCR_MODE_DQ_TURNON_DELAY_MASK DRAM_MCR_MODE_DQ_TURNON_DELAY(0x7)
++#define DRAM_MCR_MODE_ADDR_IN (0x1 << 11)
++#define DRAM_MCR_RESET (0x1 << 12)
++#define DRAM_MCR_MODE_EN(n) (((n) & 0x3) << 13)
++#define DRAM_MCR_MODE_EN_MASK DRAM_MCR_MOD_EN(0x3)
++#define DRAM_MCR_DCLK_OUT (0x1 << 16)
++
++#define DRAM_DLLCR_NRESET (0x1 << 30)
++#define DRAM_DLLCR_DISABLE (0x1 << 31)
++
++#define DRAM_ZQCR0_IMP_DIV(n) (((n) & 0xff) << 20)
++#define DRAM_ZQCR0_IMP_DIV_MASK DRAM_ZQCR0_IMP_DIV(0xff)
++
++#define DRAM_IOCR_ODT_EN(n) ((((n) & 0x3) << 30) | ((n) & 0x3) << 0)
++#define DRAM_IOCR_ODT_EN_MASK DRAM_IOCR_ODT_EN(0x3)
++
++#define DRAM_MR_BURST_LENGTH(n) (((n) & 0x7) << 0)
++#define DRAM_MR_BURST_LENGTH_MASK DRAM_MR_BURST_LENGTH(0x7)
++#define DRAM_MR_CAS_LAT(n) (((n) & 0x7) << 4)
++#define DRAM_MR_CAS_LAT_MASK DRAM_MR_CAS_LAT(0x7)
++#define DRAM_MR_WRITE_RECOVERY(n) (((n) & 0x7) << 9)
++#define DRAM_MR_WRITE_RECOVERY_MASK DRAM_MR_WRITE_RECOVERY(0x7)
++#define DRAM_MR_POWER_DOWN (0x1 << 12)
++
++#define DRAM_CSEL_MAGIC 0x16237495
++
++unsigned long sunxi_dram_init(void);
++unsigned long dramc_init(struct dram_para *para);
++
++#endif /* _SUNXI_DRAM_H */
+diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/early_print.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/early_print.h
+--- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/early_print.h       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/early_print.h 2014-09-06 16:58:35.381953139 +0200
+@@ -0,0 +1,58 @@
++/*
++ * (C) Copyright 2007-2012
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * Early uart print for debugging.
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#ifndef _SUNXI_EARLY_PRINT_H
++#define _SUNXI_EARLY_PRINT_H
++
++#include <asm/arch/cpu.h>
++
++#define SUNXI_UART_BASE SUNXI_UART0_BASE
++
++#define UART_OFFSET 0x400
++
++/* receive buffer register */
++#define UART_RBR(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x0)
++/* transmit holding register */
++#define UART_THR(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x0)
++/* divisor latch low register */
++#define UART_DLL(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x0)
++
++/* divisor latch high register */
++#define UART_DLH(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x4)
++/* interrupt enable reigster */
++#define UART_IER(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x4)
++
++/* interrupt identity register */
++#define UART_IIR(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x8)
++/* fifo control register */
++#define UART_FCR(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x8)
++
++/* line control register */
++#define UART_LCR(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0xc)
++#define UART_LCR_DLAB (0x1 << 7)
++
++/* line status register */
++#define UART_LSR(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x14)
++#define UART_LSR_TEMT (0x1 << 6)
++
++
++#define BAUD_115200    (0xd) /* 24 * 1000 * 1000 / 16 / 115200 = 13 */
++#define NO_PARITY      (0)
++#define ONE_STOP_BIT   (0)
++#define DAT_LEN_8_BITS (3)
++#define LC_8_N_1          (NO_PARITY << 3 | ONE_STOP_BIT << 2 | DAT_LEN_8_BITS)
++
++#ifndef __ASSEMBLY__
++void uart_init(void);
++void uart_putc(char c);
++void uart_puts(const char *s);
++#endif /* __ASSEMBLY__ */
++
++#endif /* _SUNXI_EARLY_PRINT_H */
+diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/gpio.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/gpio.h
+--- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/gpio.h      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/gpio.h        2014-09-06 16:58:35.381953139 +0200
+@@ -0,0 +1,174 @@
++/*
++ * (C) Copyright 2007-2012
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#ifndef _SUNXI_GPIO_H
++#define _SUNXI_GPIO_H
++
++#include <linux/types.h>
++#include <asm/arch/cpu.h>
++
++/*
++ * sunxi has 9 banks of gpio, they are:
++ * PA0 - PA17 | PB0 - PB23 | PC0 - PC24
++ * PD0 - PD27 | PE0 - PE31 | PF0 - PF5
++ * PG0 - PG9  | PH0 - PH27 | PI0 - PI12
++ */
++
++#define SUNXI_GPIO_A  0
++#define SUNXI_GPIO_B  1
++#define SUNXI_GPIO_C  2
++#define SUNXI_GPIO_D  3
++#define SUNXI_GPIO_E  4
++#define SUNXI_GPIO_F  5
++#define SUNXI_GPIO_G  6
++#define SUNXI_GPIO_H  7
++#define SUNXI_GPIO_I  8
++#define SUNXI_GPIO_BANKS 9
++
++/*
++ * sun6i has atleast 1 additional bank, note banks J K don't exist!
++ * PL0 - PL1 at the very least is known.
++ *
++ * Note this bank is at a different register offset!
++ */
++#define SUNXI_GPIO_L  9
++
++struct sunxi_gpio {
++      u32 cfg[4];
++      u32 dat;
++      u32 drv[2];
++      u32 pull[2];
++};
++
++/* gpio interrupt control */
++struct sunxi_gpio_int {
++      u32 cfg[3];
++      u32 ctl;
++      u32 sta;
++      u32 deb;                /* interrupt debounce */
++};
++
++struct sunxi_gpio_reg {
++      struct sunxi_gpio gpio_bank[SUNXI_GPIO_BANKS];
++      u8 res[0xbc];
++      struct sunxi_gpio_int gpio_int;
++};
++
++#define BANK_TO_GPIO(bank)    (((bank) < SUNXI_GPIO_BANKS) ? \
++      &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] : \
++      (struct sunxi_gpio *)SUNXI_R_PIO_BASE)
++
++#define GPIO_BANK(pin)                ((pin) >> 5)
++#define GPIO_NUM(pin)         ((pin) & 0x1f)
++
++#define GPIO_CFG_INDEX(pin)   (((pin) & 0x1f) >> 3)
++#define GPIO_CFG_OFFSET(pin)  ((((pin) & 0x1f) & 0x7) << 2)
++
++#define GPIO_DRV_INDEX(pin)   (((pin) & 0x1f) >> 4)
++#define GPIO_DRV_OFFSET(pin)  ((((pin) & 0x1f) & 0xf) << 1)
++
++#define GPIO_PULL_INDEX(pin)  (((pin) & 0x1f) >> 4)
++#define GPIO_PULL_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1)
++
++/* GPIO bank sizes */
++#define SUNXI_GPIO_A_NR               32
++#define SUNXI_GPIO_B_NR               32
++#define SUNXI_GPIO_C_NR               32
++#define SUNXI_GPIO_D_NR               32
++#define SUNXI_GPIO_E_NR               32
++#define SUNXI_GPIO_F_NR               32
++#define SUNXI_GPIO_G_NR               32
++#define SUNXI_GPIO_H_NR               32
++#define SUNXI_GPIO_I_NR               32
++#define SUNXI_GPIO_L_NR               32
++
++#define SUNXI_GPIO_NEXT(__gpio) \
++      ((__gpio##_START) + (__gpio##_NR) + 0)
++
++enum sunxi_gpio_number {
++      SUNXI_GPIO_A_START = 0,
++      SUNXI_GPIO_B_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_A),
++      SUNXI_GPIO_C_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_B),
++      SUNXI_GPIO_D_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_C),
++      SUNXI_GPIO_E_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_D),
++      SUNXI_GPIO_F_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_E),
++      SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F),
++      SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G),
++      SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H),
++      SUNXI_GPIO_L_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_I),
++};
++
++/* SUNXI GPIO number definitions */
++#define SUNXI_GPA(_nr)        (SUNXI_GPIO_A_START + (_nr))
++#define SUNXI_GPB(_nr)        (SUNXI_GPIO_B_START + (_nr))
++#define SUNXI_GPC(_nr)        (SUNXI_GPIO_C_START + (_nr))
++#define SUNXI_GPD(_nr)        (SUNXI_GPIO_D_START + (_nr))
++#define SUNXI_GPE(_nr)        (SUNXI_GPIO_E_START + (_nr))
++#define SUNXI_GPF(_nr)        (SUNXI_GPIO_F_START + (_nr))
++#define SUNXI_GPG(_nr)        (SUNXI_GPIO_G_START + (_nr))
++#define SUNXI_GPH(_nr)        (SUNXI_GPIO_H_START + (_nr))
++#define SUNXI_GPI(_nr)        (SUNXI_GPIO_I_START + (_nr))
++#define SUNXI_GPL(_nr)        (SUNXI_GPIO_L_START + (_nr))
++
++/* GPIO pin function config */
++#define SUNXI_GPIO_INPUT      0
++#define SUNXI_GPIO_OUTPUT     1
++
++#define SUNXI_GPA0_EMAC               2
++#define SUN7I_GPA0_GMAC               5
++
++#define SUNXI_GPB0_TWI0               2
++
++#define SUN4I_GPB22_UART0_TX  2
++#define SUN4I_GPB23_UART0_RX  2
++
++#define SUN5I_GPB19_UART0_TX  2
++#define SUN5I_GPB20_UART0_RX  2
++
++#define SUN5I_GPG3_UART1_TX   4
++#define SUN5I_GPG4_UART1_RX   4
++
++#define SUNXI_GPC6_SDC2               3
++
++#define SUNXI_GPF0_SDC0               2
++
++#define SUNXI_GPF2_SDC0               2
++
++#ifdef CONFIG_SUN8I
++#define SUNXI_GPF2_UART0_TX   3
++#define SUNXI_GPF4_UART0_RX   3
++#else
++#define SUNXI_GPF2_UART0_TX   4
++#define SUNXI_GPF4_UART0_RX   4
++#endif
++
++#define SUN4I_GPG0_SDC1               4
++
++#define SUN4I_GPH22_SDC1      5
++
++#define SUN4I_GPI4_SDC3               2
++
++/* GPIO pin pull-up/down config */
++#define SUNXI_GPIO_PULL_DISABLE       0
++#define SUNXI_GPIO_PULL_UP    1
++#define SUNXI_GPIO_PULL_DOWN  2
++
++#define SUNXI_GPL0_R_P2WI_SCK 3
++#define SUNXI_GPL1_R_P2WI_SDA 3
++
++#define SUN8I_GPL2_R_UART_TX  2
++#define SUN8I_GPL3_R_UART_RX  2
++
++int sunxi_gpio_set_cfgpin(u32 pin, u32 val);
++int sunxi_gpio_get_cfgpin(u32 pin);
++int sunxi_gpio_set_drv(u32 pin, u32 val);
++int sunxi_gpio_set_pull(u32 pin, u32 val);
++int sunxi_name_to_gpio(const char *name);
++#define name_to_gpio(name) sunxi_name_to_gpio(name)
++
++#endif /* _SUNXI_GPIO_H */
+diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/i2c.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/i2c.h
+--- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/i2c.h       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/i2c.h 2014-09-06 16:58:35.381953139 +0200
+@@ -0,0 +1,15 @@
++/*
++ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++#ifndef _SUNXI_I2C_H_
++#define _SUNXI_I2C_H_
++
++#include <asm/arch/cpu.h>
++
++#define CONFIG_I2C_MVTWSI_BASE        SUNXI_TWI0_BASE
++/* This is abp0-clk on sun4i/5i/7i / abp1-clk on sun6i/sun8i which is 24MHz */
++#define CONFIG_SYS_TCLK               24000000
++
++#endif
+diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/mmc.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/mmc.h
+--- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/mmc.h       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/mmc.h 2014-09-06 16:58:35.381953139 +0200
+@@ -0,0 +1,122 @@
++/*
++ * (C) Copyright 2007-2011
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Aaron <leafy.myeh@allwinnertech.com>
++ *
++ * MMC register definition for allwinner sunxi platform.
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#ifndef _SUNXI_MMC_H
++#define _SUNXI_MMC_H
++
++#include <linux/types.h>
++
++struct sunxi_mmc {
++      u32 gctrl;              /* 0x00 global control */
++      u32 clkcr;              /* 0x04 clock control */
++      u32 timeout;            /* 0x08 time out */
++      u32 width;              /* 0x0c bus width */
++      u32 blksz;              /* 0x10 block size */
++      u32 bytecnt;            /* 0x14 byte count */
++      u32 cmd;                /* 0x18 command */
++      u32 arg;                /* 0x1c argument */
++      u32 resp0;              /* 0x20 response 0 */
++      u32 resp1;              /* 0x24 response 1 */
++      u32 resp2;              /* 0x28 response 2 */
++      u32 resp3;              /* 0x2c response 3 */
++      u32 imask;              /* 0x30 interrupt mask */
++      u32 mint;               /* 0x34 masked interrupt status */
++      u32 rint;               /* 0x38 raw interrupt status */
++      u32 status;             /* 0x3c status */
++      u32 ftrglevel;          /* 0x40 FIFO threshold watermark*/
++      u32 funcsel;            /* 0x44 function select */
++      u32 cbcr;               /* 0x48 CIU byte count */
++      u32 bbcr;               /* 0x4c BIU byte count */
++      u32 dbgc;               /* 0x50 debug enable */
++      u32 res0[11];
++      u32 dmac;               /* 0x80 internal DMA control */
++      u32 dlba;               /* 0x84 internal DMA descr list base address */
++      u32 idst;               /* 0x88 internal DMA status */
++      u32 idie;               /* 0x8c internal DMA interrupt enable */
++      u32 chda;               /* 0x90 */
++      u32 cbda;               /* 0x94 */
++};
++
++#define SUNXI_MMC_CLK_POWERSAVE               (0x1 << 17)
++#define SUNXI_MMC_CLK_ENABLE          (0x1 << 16)
++#define SUNXI_MMC_CLK_DIVIDER_MASK    (0xff)
++
++#define SUNXI_MMC_GCTRL_SOFT_RESET    (0x1 << 0)
++#define SUNXI_MMC_GCTRL_FIFO_RESET    (0x1 << 1)
++#define SUNXI_MMC_GCTRL_DMA_RESET     (0x1 << 2)
++#define SUNXI_MMC_GCTRL_RESET         (SUNXI_MMC_GCTRL_SOFT_RESET|\
++                                       SUNXI_MMC_GCTRL_FIFO_RESET|\
++                                       SUNXI_MMC_GCTRL_DMA_RESET)
++#define SUNXI_MMC_GCTRL_DMA_ENABLE    (0x1 << 5)
++#define SUNXI_MMC_GCTRL_ACCESS_BY_AHB   (0x1 << 31)
++
++#define SUNXI_MMC_CMD_RESP_EXPIRE     (0x1 << 6)
++#define SUNXI_MMC_CMD_LONG_RESPONSE   (0x1 << 7)
++#define SUNXI_MMC_CMD_CHK_RESPONSE_CRC        (0x1 << 8)
++#define SUNXI_MMC_CMD_DATA_EXPIRE     (0x1 << 9)
++#define SUNXI_MMC_CMD_WRITE           (0x1 << 10)
++#define SUNXI_MMC_CMD_AUTO_STOP               (0x1 << 12)
++#define SUNXI_MMC_CMD_WAIT_PRE_OVER   (0x1 << 13)
++#define SUNXI_MMC_CMD_SEND_INIT_SEQ   (0x1 << 15)
++#define SUNXI_MMC_CMD_UPCLK_ONLY      (0x1 << 21)
++#define SUNXI_MMC_CMD_START           (0x1 << 31)
++
++#define SUNXI_MMC_RINT_RESP_ERROR             (0x1 << 1)
++#define SUNXI_MMC_RINT_COMMAND_DONE           (0x1 << 2)
++#define SUNXI_MMC_RINT_DATA_OVER              (0x1 << 3)
++#define SUNXI_MMC_RINT_TX_DATA_REQUEST                (0x1 << 4)
++#define SUNXI_MMC_RINT_RX_DATA_REQUEST                (0x1 << 5)
++#define SUNXI_MMC_RINT_RESP_CRC_ERROR         (0x1 << 6)
++#define SUNXI_MMC_RINT_DATA_CRC_ERROR         (0x1 << 7)
++#define SUNXI_MMC_RINT_RESP_TIMEOUT           (0x1 << 8)
++#define SUNXI_MMC_RINT_DATA_TIMEOUT           (0x1 << 9)
++#define SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE    (0x1 << 10)
++#define SUNXI_MMC_RINT_FIFO_RUN_ERROR         (0x1 << 11)
++#define SUNXI_MMC_RINT_HARD_WARE_LOCKED               (0x1 << 12)
++#define SUNXI_MMC_RINT_START_BIT_ERROR                (0x1 << 13)
++#define SUNXI_MMC_RINT_AUTO_COMMAND_DONE      (0x1 << 14)
++#define SUNXI_MMC_RINT_END_BIT_ERROR          (0x1 << 15)
++#define SUNXI_MMC_RINT_SDIO_INTERRUPT         (0x1 << 16)
++#define SUNXI_MMC_RINT_CARD_INSERT            (0x1 << 30)
++#define SUNXI_MMC_RINT_CARD_REMOVE            (0x1 << 31)
++#define SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT      \
++      (SUNXI_MMC_RINT_RESP_ERROR |            \
++       SUNXI_MMC_RINT_RESP_CRC_ERROR |        \
++       SUNXI_MMC_RINT_DATA_CRC_ERROR |        \
++       SUNXI_MMC_RINT_RESP_TIMEOUT |          \
++       SUNXI_MMC_RINT_DATA_TIMEOUT |          \
++       SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE |   \
++       SUNXI_MMC_RINT_FIFO_RUN_ERROR |        \
++       SUNXI_MMC_RINT_HARD_WARE_LOCKED |      \
++       SUNXI_MMC_RINT_START_BIT_ERROR |       \
++       SUNXI_MMC_RINT_END_BIT_ERROR) /* 0xbfc2 */
++#define SUNXI_MMC_RINT_INTERRUPT_DONE_BIT     \
++      (SUNXI_MMC_RINT_AUTO_COMMAND_DONE |     \
++       SUNXI_MMC_RINT_DATA_OVER |             \
++       SUNXI_MMC_RINT_COMMAND_DONE |          \
++       SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE)
++
++#define SUNXI_MMC_STATUS_RXWL_FLAG            (0x1 << 0)
++#define SUNXI_MMC_STATUS_TXWL_FLAG            (0x1 << 1)
++#define SUNXI_MMC_STATUS_FIFO_EMPTY           (0x1 << 2)
++#define SUNXI_MMC_STATUS_FIFO_FULL            (0x1 << 3)
++#define SUNXI_MMC_STATUS_CARD_PRESENT         (0x1 << 8)
++#define SUNXI_MMC_STATUS_CARD_DATA_BUSY               (0x1 << 9)
++#define SUNXI_MMC_STATUS_DATA_FSM_BUSY                (0x1 << 10)
++
++#define SUNXI_MMC_IDMAC_RESET         (0x1 << 0)
++#define SUNXI_MMC_IDMAC_FIXBURST      (0x1 << 1)
++#define SUNXI_MMC_IDMAC_ENABLE                (0x1 << 7)
++
++#define SUNXI_MMC_IDIE_TXIRQ          (0x1 << 0)
++#define SUNXI_MMC_IDIE_RXIRQ          (0x1 << 1)
++
++int sunxi_mmc_init(int sdc_no);
++#endif /* _SUNXI_MMC_H */
+diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/p2wi.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/p2wi.h
+--- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/p2wi.h      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/p2wi.h        2014-09-06 16:58:35.381953139 +0200
+@@ -0,0 +1,142 @@
++/*
++ * Sunxi platform Push-Push i2c register definition.
++ *
++ * (c) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
++ * http://linux-sunxi.org
++ *
++ * (c)Copyright 2006-2013
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Berg Xing <bergxing@allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#ifndef _SUNXI_P2WI_H
++#define _SUNXI_P2WI_H
++
++#include <linux/types.h>
++
++#define P2WI_CTRL_RESET (0x1 << 0)
++#define P2WI_CTRL_IRQ_EN (0x1 << 1)
++#define P2WI_CTRL_TRANS_ABORT (0x1 << 6)
++#define P2WI_CTRL_TRANS_START (0x1 << 7)
++
++#define __P2WI_CC_CLK(n) (((n) & 0xff) << 0)
++#define P2WI_CC_CLK_MASK __P2WI_CC_CLK_DIV(0xff)
++#define __P2WI_CC_CLK_DIV(n) (((n) >> 1) - 1)
++#define P2WI_CC_CLK_DIV(n) \
++      __P2WI_CC_CLK(__P2WI_CC_CLK_DIV(n))
++#define P2WI_CC_SDA_OUT_DELAY(n) (((n) & 0x7) << 8)
++#define P2WI_CC_SDA_OUT_DELAY_MASK P2WI_CC_SDA_OUT_DELAY(0x7)
++
++#define P2WI_IRQ_TRANS_DONE (0x1 << 0)
++#define P2WI_IRQ_TRANS_ERR (0x1 << 1)
++#define P2WI_IRQ_LOAD_BUSY (0x1 << 2)
++
++#define P2WI_STAT_TRANS_DONE (0x1 << 0)
++#define P2WI_STAT_TRANS_ERR (0x1 << 1)
++#define P2WI_STAT_LOAD_BUSY (0x1 << 2)
++#define __P2WI_STAT_TRANS_ERR(n) (((n) & 0xff) << 8)
++#define P2WI_STAT_TRANS_ERR_MASK __P2WI_STAT_TRANS_ERR_ID(0xff)
++#define __P2WI_STAT_TRANS_ERR_BYTE_1 0x01
++#define __P2WI_STAT_TRANS_ERR_BYTE_2 0x02
++#define __P2WI_STAT_TRANS_ERR_BYTE_3 0x04
++#define __P2WI_STAT_TRANS_ERR_BYTE_4 0x08
++#define __P2WI_STAT_TRANS_ERR_BYTE_5 0x10
++#define __P2WI_STAT_TRANS_ERR_BYTE_6 0x20
++#define __P2WI_STAT_TRANS_ERR_BYTE_7 0x40
++#define __P2WI_STAT_TRANS_ERR_BYTE_8 0x80
++#define P2WI_STAT_TRANS_ERR_BYTE_1 \
++      __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_1)
++#define P2WI_STAT_TRANS_ERR_BYTE_2 \
++      __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_2)
++#define P2WI_STAT_TRANS_ERR_BYTE_3 \
++      __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_3)
++#define P2WI_STAT_TRANS_ERR_BYTE_4 \
++      __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_4)
++#define P2WI_STAT_TRANS_ERR_BYTE_5 \
++      __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_5)
++#define P2WI_STAT_TRANS_ERR_BYTE_6 \
++      __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_6)
++#define P2WI_STAT_TRANS_ERR_BYTE_7 \
++      __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_7)
++#define P2WI_STAT_TRANS_ERR_BYTE_8 \
++      __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_8)
++
++#define P2WI_DATADDR_BYTE_1(n) (((n) & 0xff) << 0)
++#define P2WI_DATADDR_BYTE_1_MASK P2WI_DATADDR_BYTE_1(0xff)
++#define P2WI_DATADDR_BYTE_2(n) (((n) & 0xff) << 8)
++#define P2WI_DATADDR_BYTE_2_MASK P2WI_DATADDR_BYTE_2(0xff)
++#define P2WI_DATADDR_BYTE_3(n) (((n) & 0xff) << 16)
++#define P2WI_DATADDR_BYTE_3_MASK P2WI_DATADDR_BYTE_3(0xff)
++#define P2WI_DATADDR_BYTE_4(n) (((n) & 0xff) << 24)
++#define P2WI_DATADDR_BYTE_4_MASK P2WI_DATADDR_BYTE_4(0xff)
++#define P2WI_DATADDR_BYTE_5(n) (((n) & 0xff) << 0)
++#define P2WI_DATADDR_BYTE_5_MASK P2WI_DATADDR_BYTE_5(0xff)
++#define P2WI_DATADDR_BYTE_6(n) (((n) & 0xff) << 8)
++#define P2WI_DATADDR_BYTE_6_MASK P2WI_DATADDR_BYTE_6(0xff)
++#define P2WI_DATADDR_BYTE_7(n) (((n) & 0xff) << 16)
++#define P2WI_DATADDR_BYTE_7_MASK P2WI_DATADDR_BYTE_7(0xff)
++#define P2WI_DATADDR_BYTE_8(n) (((n) & 0xff) << 24)
++#define P2WI_DATADDR_BYTE_8_MASK P2WI_DATADDR_BYTE_8(0xff)
++
++#define __P2WI_DATA_NUM_BYTES(n) (((n) & 0x7) << 0)
++#define P2WI_DATA_NUM_BYTES_MASK __P2WI_DATA_NUM_BYTES(0x7)
++#define P2WI_DATA_NUM_BYTES(n) __P2WI_DATA_NUM_BYTES((n) - 1)
++#define P2WI_DATA_NUM_BYTES_READ (0x1 << 4)
++
++#define P2WI_DATA_BYTE_1(n) (((n) & 0xff) << 0)
++#define P2WI_DATA_BYTE_1_MASK P2WI_DATA_BYTE_1(0xff)
++#define P2WI_DATA_BYTE_2(n) (((n) & 0xff) << 8)
++#define P2WI_DATA_BYTE_2_MASK P2WI_DATA_BYTE_2(0xff)
++#define P2WI_DATA_BYTE_3(n) (((n) & 0xff) << 16)
++#define P2WI_DATA_BYTE_3_MASK P2WI_DATA_BYTE_3(0xff)
++#define P2WI_DATA_BYTE_4(n) (((n) & 0xff) << 24)
++#define P2WI_DATA_BYTE_4_MASK P2WI_DATA_BYTE_4(0xff)
++#define P2WI_DATA_BYTE_5(n) (((n) & 0xff) << 0)
++#define P2WI_DATA_BYTE_5_MASK P2WI_DATA_BYTE_5(0xff)
++#define P2WI_DATA_BYTE_6(n) (((n) & 0xff) << 8)
++#define P2WI_DATA_BYTE_6_MASK P2WI_DATA_BYTE_6(0xff)
++#define P2WI_DATA_BYTE_7(n) (((n) & 0xff) << 16)
++#define P2WI_DATA_BYTE_7_MASK P2WI_DATA_BYTE_7(0xff)
++#define P2WI_DATA_BYTE_8(n) (((n) & 0xff) << 24)
++#define P2WI_DATA_BYTE_8_MASK P2WI_DATA_BYTE_8(0xff)
++
++#define P2WI_LINECTRL_SDA_CTRL_EN (0x1 << 0)
++#define P2WI_LINECTRL_SDA_OUT_HIGH (0x1 << 1)
++#define P2WI_LINECTRL_SCL_CTRL_EN (0x1 << 2)
++#define P2WI_LINECTRL_SCL_OUT_HIGH (0x1 << 3)
++#define P2WI_LINECTRL_SDA_STATE_HIGH (0x1 << 4)
++#define P2WI_LINECTRL_SCL_STATE_HIGH (0x1 << 5)
++
++#define P2WI_PM_DEV_ADDR(n) (((n) & 0xff) << 0)
++#define P2WI_PM_DEV_ADDR_MASK P2WI_PM_DEV_ADDR(0xff)
++#define P2WI_PM_CTRL_ADDR(n) (((n) & 0xff) << 8)
++#define P2WI_PM_CTRL_ADDR_MASK P2WI_PM_CTRL_ADDR(0xff)
++#define P2WI_PM_INIT_DATA(n) (((n) & 0xff) << 16)
++#define P2WI_PM_INIT_DATA_MASK P2WI_PM_INIT_DATA(0xff)
++#define P2WI_PM_INIT_SEND (0x1 << 31)
++
++#ifndef __ASSEMBLY__
++struct sunxi_p2wi_reg {
++      u32 ctrl;       /* 0x00 control */
++      u32 cc;         /* 0x04 clock control */
++      u32 irq;        /* 0x08 interrupt */
++      u32 status;     /* 0x0c status */
++      u32 dataddr0;   /* 0x10 data address 0 */
++      u32 dataddr1;   /* 0x14 data address 1 */
++      u32 numbytes;   /* 0x18 num bytes */
++      u32 data0;      /* 0x1c data buffer 0 */
++      u32 data1;      /* 0x20 data buffer 1 */
++      u32 linectrl;   /* 0x24 line control */
++      u32 pm;         /* 0x28 power management */
++};
++
++void p2wi_init(void);
++int p2wi_set_pmu_address(u8 slave_addr, u8 ctrl_reg, u8 init_data);
++int p2wi_read(const u8 addr, u8 *data);
++int p2wi_write(const u8 addr, u8 data);
++
++#endif /* __ASSEMBLY__ */
++#endif /* _SUNXI_P2WI_H */
+diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/prcm.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/prcm.h
+--- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/prcm.h      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/prcm.h        2014-09-06 16:58:35.381953139 +0200
+@@ -0,0 +1,238 @@
++/*
++ * Sunxi A31 Power Management Unit register definition.
++ *
++ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
++ * http://linux-sunxi.org
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Berg Xing <bergxing@allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#ifndef _SUNXI_PRCM_H
++#define _SUNXI_PRCM_H
++
++#define __PRCM_CPUS_CFG_PRE(n) (((n) & 0x3) << 4)
++#define PRCM_CPUS_CFG_PRE_MASK __PRCM_CPUS_CFG_PRE(0x3)
++#define __PRCM_CPUS_CFG_PRE_DIV(n) (((n) >> 1) - 1)
++#define PRCM_CPUS_CFG_PRE_DIV(n) \
++      __PRCM_CPUS_CFG_PRE(__PRCM_CPUS_CFG_CLK_PRE(n))
++#define __PRCM_CPUS_CFG_POST(n) (((n) & 0x1f) << 8)
++#define PRCM_CPUS_CFG_POST_MASK __PRCM_CPUS_CFG_POST(0x1f)
++#define __PRCM_CPUS_CFG_POST_DIV(n) ((n) - 1)
++#define PRCM_CPUS_CFG_POST_DIV(n) \
++      __PRCM_CPUS_CFG_POST_DIV(__PRCM_CPUS_CFG_POST_DIV(n))
++#define __PRCM_CPUS_CFG_CLK_SRC(n) (((n) & 0x3) << 16)
++#define PRCM_CPUS_CFG_CLK_SRC_MASK __PRCM_CPUS_CFG_CLK_SRC(0x3)
++#define __PRCM_CPUS_CFG_CLK_SRC_LOSC 0x0
++#define __PRCM_CPUS_CFG_CLK_SRC_HOSC 0x1
++#define __PRCM_CPUS_CFG_CLK_SRC_PLL6 0x2
++#define __PRCM_CPUS_CFG_CLK_SRC_PDIV 0x3
++#define PRCM_CPUS_CFG_CLK_SRC_LOSC \
++      __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_LOSC)
++#define PRCM_CPUS_CFG_CLK_SRC_HOSC \
++      __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_HOSC)
++#define PRCM_CPUS_CFG_CLK_SRC_PLL6 \
++      __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PLL6)
++#define PRCM_CPUS_CFG_CLK_SRC_PDIV \
++      __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PDIV)
++
++#define __PRCM_APB0_RATIO(n) (((n) & 0x3) <<0)
++#define PRCM_APB0_RATIO_DIV_MASK __PRCM_APB0_RATIO_DIV(0x3)
++#define __PRCM_APB0_RATIO_DIV(n) (((n) >> 1) - 1)
++#define PRCM_APB0_RATIO_DIV(n) \
++      __PRCM_APB0_RATIO(__PRCM_APB0_RATIO_DIV(n))
++
++#define PRCM_CPU_CFG_NEON_CLK_EN (0x1 << 0)
++#define PRCM_CPU_CFG_CPU_CLK_EN (0x1 << 1)
++
++#define PRCM_APB0_GATE_PIO (0x1 << 0)
++#define PRCM_APB0_GATE_IR (0x1 << 1)
++#define PRCM_APB0_GATE_TIMER01 (0x1 << 2)
++#define PRCM_APB0_GATE_P2WI (0x1 << 3)
++#define PRCM_APB0_GATE_UART (0x1 << 4)
++#define PRCM_APB0_GATE_1WIRE (0x1 << 5)
++#define PRCM_APB0_GATE_I2C (0x1 << 6)
++
++#define PRCM_APB0_RESET_PIO (0x1 << 0)
++#define PRCM_APB0_RESET_IR (0x1 << 1)
++#define PRCM_APB0_RESET_TIMER01 (0x1 << 2)
++#define PRCM_APB0_RESET_P2WI (0x1 << 3)
++#define PRCM_APB0_RESET_UART (0x1 << 4)
++#define PRCM_APB0_RESET_1WIRE (0x1 << 5)
++#define PRCM_APB0_RESET_I2C (0x1 << 6)
++
++#define PRCM_PLL_CTRL_PLL_BIAS (0x1 << 0)
++#define PRCM_PLL_CTRL_HOSC_GAIN_ENH (0x1 << 1)
++#define __PRCM_PLL_CTRL_USB_CLK_SRC(n) (((n) & 0x3) << 4)
++#define PRCM_PLL_CTRL_USB_CLK_SRC_MASK \
++      __PRCM_PLL_CTRL_USB_CLK_SRC(0x3)
++#define __PRCM_PLL_CTRL_USB_CLK_0 0x0
++#define __PRCM_PLL_CTRL_USB_CLK_1 0x1
++#define __PRCM_PLL_CTRL_USB_CLK_2 0x2
++#define __PRCM_PLL_CTRL_USB_CLK_3 0x3
++#define PRCM_PLL_CTRL_USB_CLK_0 \
++      __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_0)
++#define PRCM_PLL_CTRL_USB_CLK_1 \
++      __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_1)
++#define PRCM_PLL_CTRL_USB_CLK_2 \
++      __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_2)
++#define PRCM_PLL_CTRL_USB_CLK_3 \
++      __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_3)
++#define __PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) (((n) & 0x3) << 12)
++#define PRCM_PLL_CTRL_INT_PLL_IN_SEL_MASK \
++      __PRCM_PLL_CTRL_INT_PLL_IN_SEL(0x3)
++#define PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) \
++      __PRCM_PLL_CTRL_INT_PLL_IN_SEL(n)
++#define __PRCM_PLL_CTRL_HOSC_CLK_SEL(n) (((n) & 0x3) << 20)
++#define PRCM_PLL_CTRL_HOSC_CLK_SEL_MASK \
++      __PRCM_PLL_CTRL_HOSC_CLK_SEL(0x3)
++#define __PRCM_PLL_CTRL_HOSC_CLK_0 0x0
++#define __PRCM_PLL_CTRL_HOSC_CLK_1 0x1
++#define __PRCM_PLL_CTRL_HOSC_CLK_2 0x2
++#define __PRCM_PLL_CTRL_HOSC_CLK_3 0x3
++#define PRCM_PLL_CTRL_HOSC_CLK_0 \
++      __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_0)
++#define PRCM_PLL_CTRL_HOSC_CLK_1 \
++      __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_1)
++#define PRCM_PLL_CTRL_HOSC_CLK_2 \
++      __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_2)
++#define PRCM_PLL_CTRL_HOSC_CLK_3 \
++      __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_3)
++#define PRCM_PLL_CTRL_PLL_TST_SRC_EXT (0x1 << 24)
++#define PRCM_PLL_CTRL_LDO_DIGITAL_EN (0x1 << 0)
++#define PRCM_PLL_CTRL_LDO_ANALOG_EN (0x1 << 1)
++#define PRCM_PLL_CTRL_EXT_OSC_EN (0x1 << 2)
++#define PRCM_PLL_CTRL_CLK_TST_EN (0x1 << 3)
++#define PRCM_PLL_CTRL_IN_PWR_HIGH (0x1 << 15) /* 3.3 for hi 2.5 for lo */
++#define __PRCM_PLL_CTRL_VDD_LDO_OUT(n) (((n) & 0x7) << 16)
++#define PRCM_PLL_CTRL_LDO_OUT_MASK \
++      __PRCM_PLL_CTRL_LDO_OUT(0x7)
++/* When using the low voltage 20 mV steps, and high voltage 30 mV steps */
++#define PRCM_PLL_CTRL_LDO_OUT_L(n) \
++      __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7)
++#define PRCM_PLL_CTRL_LDO_OUT_H(n) \
++      __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1160) / 30) & 0x7)
++#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \
++      __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000)
++#define PRCM_PLL_CTRL_LDO_OUT_HV(n) \
++      __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160)
++#define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24)
++
++#define PRCM_CLK_1WIRE_GATE (0x1 << 31)
++
++#define __PRCM_CLK_MOD0_M(n) (((n) & 0xf) << 0)
++#define PRCM_CLK_MOD0_M_MASK __PRCM_CLK_MOD0_M(0xf)
++#define __PRCM_CLK_MOD0_M_X(n) (n - 1)
++#define PRCM_CLK_MOD0_M(n) __PRCM_CLK_MOD0_M(__PRCM_CLK_MOD0_M_X(n))
++#define PRCM_CLK_MOD0_OUT_PHASE(n) (((n) & 0x7) << 8)
++#define PRCM_CLK_MOD0_OUT_PHASE_MASK(n) PRCM_CLK_MOD0_OUT_PHASE(0x7)
++#define _PRCM_CLK_MOD0_N(n) (((n) & 0x3) << 16)
++#define PRCM_CLK_MOD0_N_MASK __PRCM_CLK_MOD_N(0x3)
++#define __PRCM_CLK_MOD0_N_X(n) (((n) >> 1) -1)
++#define PRCM_CLK_MOD0_N(n) __PRCM_CLK_MOD0_N(__PRCM_CLK_MOD0_N_X(n))
++#define PRCM_CLK_MOD0_SMPL_PHASE(n) (((n) & 0x7) << 20)
++#define PRCM_CLK_MOD0_SMPL_PHASE_MASK PRCM_CLK_MOD0_SMPL_PHASE(0x7)
++#define PRCM_CLK_MOD0_SRC_SEL(n) (((n) & 0x7) << 24)
++#define PRCM_CLK_MOD0_SRC_SEL_MASK PRCM_CLK_MOD0_SRC_SEL(0x7)
++#define PRCM_CLK_MOD0_GATE_EN (0x1 << 31)
++
++#define PRCM_APB0_RESET_PIO (0x1 << 0)
++#define PRCM_APB0_RESET_IR (0x1 << 1)
++#define PRCM_APB0_RESET_TIMER01 (0x1 << 2)
++#define PRCM_APB0_RESET_P2WI (0x1 << 3)
++#define PRCM_APB0_RESET_UART (0x1 << 4)
++#define PRCM_APB0_RESET_1WIRE (0x1 << 5)
++#define PRCM_APB0_RESET_I2C (0x1 << 6)
++
++#define __PRCM_CLK_OUTD_M(n) (((n) & 0x7) << 8)
++#define PRCM_CLK_OUTD_M_MASK __PRCM_CLK_OUTD_M(0x7)
++#define __PRCM_CLK_OUTD_M_X() ((n) - 1)
++#define PRCM_CLK_OUTD_M(n) __PRCM_CLK_OUTD_M(__PRCM_CLK_OUTD_M_X(n))
++#define __PRCM_CLK_OUTD_N(n) (((n) & 0x7) << 20)
++#define PRCM_CLK_OUTD_N_MASK __PRCM_CLK_OUTD_N(0x7)
++#define __PRCM_CLK_OUTD_N_X(n) (((n) >> 1) - 1)
++#define PRCM_CLK_OUTD_N(n) __PRCM_CLK_OUTD_N(__PRCM_CLK_OUTD_N_X(n)
++#define __PRCM_CLK_OUTD_SRC_SEL(n) (((n) & 0x3) << 24)
++#define PRCM_CLK_OUTD_SRC_SEL_MASK __PRCM_CLK_OUTD_SRC_SEL(0x3)
++#define __PRCM_CLK_OUTD_SRC_LOSC2 0x0
++#define __PRCM_CLK_OUTD_SRC_LOSC 0x1
++#define __PRCM_CLK_OUTD_SRC_HOSC 0x2
++#define __PRCM_CLK_OUTD_SRC_ERR 0x3
++#define PRCM_CLK_OUTD_SRC_LOSC2 \
++#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC2)
++#define PRCM_CLK_OUTD_SRC_LOSC \
++#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC)
++#define PRCM_CLK_OUTD_SRC_HOSC \
++#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_HOSC)
++#define PRCM_CLK_OUTD_SRC_ERR \
++#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_ERR)
++#define PRCM_CLK_OUTD_EN (0x1 << 31)
++
++#define PRCM_CPU0_PWROFF (0x1 << 0)
++#define PRCM_CPU1_PWROFF (0x1 << 1)
++#define PRCM_CPU2_PWROFF (0x1 << 2)
++#define PRCM_CPU3_PWROFF (0x1 << 3)
++#define PRCM_CPU_ALL_PWROFF (0xf << 0)
++
++#define PRCM_VDD_SYS_DRAM_CH0_PAD_HOLD_PWROFF (0x1 << 0)
++#define PRCM_VDD_SYS_DRAM_CH1_PAD_HOLD_PWROFF (0x1 << 1)
++#define PRCM_VDD_SYS_AVCC_A_PWROFF (0x1 << 2)
++#define PRCM_VDD_SYS_CPU0_VDD_PWROFF (0x1 << 3)
++
++#define PRCM_VDD_GPU_PWROFF (0x1 << 0)
++
++#define PRCM_VDD_SYS_RESET (0x1 << 0)
++
++#define PRCM_CPU1_PWR_CLAMP(n) (((n) & 0xff) << 0)
++#define PRCM_CPU1_PWR_CLAMP_MASK PRCM_CPU1_PWR_CLAMP(0xff)
++
++#define PRCM_CPU2_PWR_CLAMP(n) (((n) & 0xff) << 0)
++#define PRCM_CPU2_PWR_CLAMP_MASK PRCM_CPU2_PWR_CLAMP(0xff)
++
++#define PRCM_CPU3_PWR_CLAMP(n) (((n) & 0xff) << 0)
++#define PRCM_CPU3_PWR_CLAMP_MASK PRCM_CPU3_PWR_CLAMP(0xff)
++
++#ifndef __ASSEMBLY__
++struct sunxi_prcm_reg {
++      u32 cpus_cfg;           /* 0x000 */
++      u8 res0[0x8];           /* 0x004 */
++      u32 apb0_ratio;         /* 0x00c */
++      u32 cpu0_cfg;           /* 0x010 */
++      u32 cpu1_cfg;           /* 0x014 */
++      u32 cpu2_cfg;           /* 0x018 */
++      u32 cpu3_cfg;           /* 0x01c */
++      u8 res1[0x8];           /* 0x020 */
++      u32 apb0_gate;          /* 0x028 */
++      u8 res2[0x14];          /* 0x02c */
++      u32 pll_ctrl0;          /* 0x040 */
++      u32 pll_ctrl1;          /* 0x044 */
++      u8 res3[0x8];           /* 0x048 */
++      u32 clk_1wire;          /* 0x050 */
++      u32 clk_ir;             /* 0x054 */
++      u8 res4[0x58];          /* 0x058 */
++      u32 apb0_reset;         /* 0x0b0 */
++      u8 res5[0x3c];          /* 0x0b4 */
++      u32 clk_outd;           /* 0x0f0 */
++      u8 res6[0xc];           /* 0x0f4 */
++      u32 cpu_pwroff;         /* 0x100 */
++      u8 res7[0xc];           /* 0x104 */
++      u32 vdd_sys_pwroff;     /* 0x110 */
++      u8 res8[0x4];           /* 0x114 */
++      u32 gpu_pwroff;         /* 0x118 */
++      u8 res9[0x4];           /* 0x11c */
++      u32 vdd_pwr_reset;      /* 0x120 */
++      u8 res10[0x20];         /* 0x124 */
++      u32 cpu1_pwr_clamp;     /* 0x144 */
++      u32 cpu2_pwr_clamp;     /* 0x148 */
++      u32 cpu3_pwr_clamp;     /* 0x14c */
++      u8 res11[0x30];         /* 0x150 */
++      u32 dram_pwr;           /* 0x180 */
++      u8 res12[0xc];          /* 0x184 */
++      u32 dram_tst;           /* 0x190 */
++};
++
++void prcm_apb0_enable(u32 flags);
++#endif /* __ASSEMBLY__ */
++#endif /* _PRCM_H */
+diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/smp.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/smp.h
+--- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/smp.h       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/smp.h 2014-09-06 16:58:35.381953139 +0200
+@@ -0,0 +1,22 @@
++/*
++ * (C) Copyright 2013
++ * Carl van Schaik <carl@ok-labs.com>
++ *
++ * CPU configuration registers for the sun7i (A20).
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#ifndef _SUNXI_SMP_H_
++#define _SUNXI_SMP_H_
++
++#ifndef __ASSEMBLY__
++
++void startup_secondaries(void);
++
++/* Assembly entry point */
++extern void secondary_init(void);
++
++#endif /* __ASSEMBLY__ */
++
++#endif /* _SUNXI_SMP_H_ */
+diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/spl.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/spl.h
+--- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/spl.h       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/spl.h 2014-09-06 16:58:35.381953139 +0200
+@@ -0,0 +1,20 @@
++/*
++ * This is a copy of omap3/spl.h:
++ *
++ * (C) Copyright 2012
++ * Texas Instruments, <www.ti.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++#ifndef       _ASM_ARCH_SPL_H_
++#define       _ASM_SPL_H_
++
++#define BOOT_DEVICE_NONE      0
++#define BOOT_DEVICE_XIP               1
++#define BOOT_DEVICE_NAND      2
++#define BOOT_DEVICE_ONE_NAND  3
++#define BOOT_DEVICE_MMC2      5 /*emmc*/
++#define BOOT_DEVICE_MMC1      6
++#define BOOT_DEVICE_XIPWAIT   7
++#define BOOT_DEVICE_MMC2_2      0xff
++#endif
+diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/sys_proto.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/sys_proto.h
+--- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/sys_proto.h 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/sys_proto.h   2014-09-06 16:58:35.381953139 +0200
+@@ -0,0 +1,16 @@
++/*
++ * (C) Copyright 2007-2012
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#ifndef _SYS_PROTO_H_
++#define _SYS_PROTO_H_
++
++#include <linux/types.h>
++
++void sdelay(unsigned long);
++
++#endif
+diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/timer.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/timer.h
+--- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/timer.h     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/timer.h       2014-09-06 16:58:35.381953139 +0200
+@@ -0,0 +1,88 @@
++/*
++ * (C) Copyright 2007-2011
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * Configuration settings for the Allwinner A10-evb board.
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#ifndef _SUNXI_TIMER_H_
++#define _SUNXI_TIMER_H_
++
++#ifndef __ASSEMBLY__
++
++#include <linux/types.h>
++
++/* General purpose timer */
++struct sunxi_timer {
++      u32 ctl;
++      u32 inter;
++      u32 val;
++      u8 res[4];
++};
++
++/* Audio video sync*/
++struct sunxi_avs {
++      u32 ctl;                /* 0x80 */
++      u32 cnt0;               /* 0x84 */
++      u32 cnt1;               /* 0x88 */
++      u32 div;                /* 0x8c */
++};
++
++/* 64 bit counter */
++struct sunxi_64cnt {
++      u32 ctl;                /* 0xa0 */
++      u32 lo;                 /* 0xa4 */
++      u32 hi;                 /* 0xa8 */
++};
++
++/* Watchdog */
++struct sunxi_wdog {
++      u32 ctl;                /* 0x90 */
++      u32 mode;               /* 0x94 */
++};
++
++/* Rtc */
++struct sunxi_rtc {
++      u32 ctl;                /* 0x100 */
++      u32 yymmdd;             /* 0x104 */
++      u32 hhmmss;             /* 0x108 */
++};
++
++/* Alarm */
++struct sunxi_alarm {
++      u32 ddhhmmss;           /* 0x10c */
++      u32 hhmmss;             /* 0x110 */
++      u32 en;                 /* 0x114 */
++      u32 irqen;              /* 0x118 */
++      u32 irqsta;             /* 0x11c */
++};
++
++/* Timer general purpose register */
++struct sunxi_tgp {
++      u32 tgpd;
++};
++
++struct sunxi_timer_reg {
++      u32 tirqen;             /* 0x00 */
++      u32 tirqsta;            /* 0x04 */
++      u8 res1[8];
++      struct sunxi_timer timer[6];    /* We have 6 timers */
++      u8 res2[16];
++      struct sunxi_avs avs;
++      struct sunxi_wdog wdog;
++      u8 res3[8];
++      struct sunxi_64cnt cnt64;
++      u8 res4[0x58];
++      struct sunxi_rtc rtc;
++      struct sunxi_alarm alarm;
++      struct sunxi_tgp tgp[4];
++      u8 res5[8];
++      u32 cpu_cfg;
++};
++
++#endif /* __ASSEMBLY__ */
++
++#endif
+diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/watchdog.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/watchdog.h
+--- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/watchdog.h  1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/watchdog.h    2014-09-06 16:58:35.381953139 +0200
+@@ -0,0 +1,22 @@
++/*
++ * Watchdog driver for the Allwinner sunxi platform.
++ * Copyright (C) 2013  Oliver Schinagl <oliver@schinagl.nl>
++ * http://www.linux-sunxi.org/
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#ifndef _SUNXI_WATCHDOG_H_
++#define _SUNXI_WATCHDOG_H_
++
++/* Timeout limits */
++#define WDT_MAX_TIMEOUT 16
++#define WDT_OFF -1
++
++#ifndef __ASSEMBLY__
++void watchdog_reset(void);
++void watchdog_set(int timeout);
++void watchdog_init(void);
++#endif /* __ASSEMBLY__ */
++
++#endif
+diff -ruN u-boot-2014.04/board/sunxi/board.c u-boot-sunxi/board/sunxi/board.c
+--- u-boot-2014.04/board/sunxi/board.c 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/board.c   2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,239 @@
++/*
++ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
++ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
++ *
++ * (C) Copyright 2007-2011
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * Some board init for the Allwinner A10-evb board.
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#ifdef CONFIG_AXP152_POWER
++#include <axp152.h>
++#endif
++#ifdef CONFIG_AXP209_POWER
++#include <axp209.h>
++#endif
++#ifdef CONFIG_AXP221_POWER
++#include <axp221.h>
++#endif
++#include <asm/arch/clock.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/dram.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/mmc.h>
++#include <asm/io.h>
++#include <net.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++
++/* add board specific code here */
++int board_init(void)
++{
++      int id_pfr1;
++
++      gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100);
++
++      asm volatile("mrc p15, 0, %0, c0, c1, 1" : "=r"(id_pfr1));
++      debug("id_pfr1: 0x%08x\n", id_pfr1);
++      /* Generic Timer Extension available? */
++      if ((id_pfr1 >> 16) & 0xf) {
++              debug("Setting CNTFRQ\n");
++              /* CNTFRQ == 24 MHz */
++              asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r"(24000000));
++      }
++
++#ifdef CONFIG_STATUS_LED
++      status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
++#endif
++      return 0;
++}
++
++#ifdef CONFIG_DISPLAY_BOARDINFO
++int checkboard(void)
++{
++      printf("Board: %s\n", CONFIG_SYS_BOARD_NAME);
++
++      return 0;
++}
++#endif
++
++int dram_init(void)
++{
++      gd->ram_size = get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE);
++
++      return 0;
++}
++
++#ifdef CONFIG_GENERIC_MMC
++static void mmc_pinmux_setup(int sdc)
++{
++      unsigned int pin;
++
++      switch (sdc) {
++      case 0:
++              /* D1-PF0, D0-PF1, CLK-PF2, CMD-PF3, D3-PF4, D4-PF5 */
++              for (pin = SUNXI_GPF(0); pin <= SUNXI_GPF(5); pin++) {
++                      sunxi_gpio_set_cfgpin(pin, SUNXI_GPF0_SDC0);
++                      sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
++                      sunxi_gpio_set_drv(pin, 2);
++              }
++              break;
++
++      case 1:
++              /* CMD-PH22, CLK-PH23, D0~D3-PH24~27 : 5 */
++              for (pin = SUNXI_GPH(22); pin <= SUNXI_GPH(27); pin++) {
++                      sunxi_gpio_set_cfgpin(pin, SUN4I_GPH22_SDC1);
++                      sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
++                      sunxi_gpio_set_drv(pin, 2);
++              }
++              break;
++
++      case 2:
++              /* CMD-PC6, CLK-PC7, D0-PC8, D1-PC9, D2-PC10, D3-PC11 */
++              for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(11); pin++) {
++                      sunxi_gpio_set_cfgpin(pin, SUNXI_GPC6_SDC2);
++                      sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
++                      sunxi_gpio_set_drv(pin, 2);
++              }
++              break;
++
++      case 3:
++              /* CMD-PI4, CLK-PI5, D0~D3-PI6~9 : 2 */
++              for (pin = SUNXI_GPI(4); pin <= SUNXI_GPI(9); pin++) {
++                      sunxi_gpio_set_cfgpin(pin, SUN4I_GPI4_SDC3);
++                      sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
++                      sunxi_gpio_set_drv(pin, 2);
++              }
++              break;
++
++      default:
++              printf("sunxi: invalid MMC slot %d for pinmux setup\n", sdc);
++              break;
++      }
++}
++
++int board_mmc_init(bd_t *bis)
++{
++      mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT);
++      sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT);
++#if !defined (CONFIG_SPL_BUILD) && defined (CONFIG_MMC_SUNXI_SLOT_EXTRA)
++      mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT_EXTRA);
++      sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT_EXTRA);
++#endif
++
++      return 0;
++}
++#endif
++
++void i2c_init_board(void)
++{
++      sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUNXI_GPB0_TWI0);
++      sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUNXI_GPB0_TWI0);
++      clock_twi_onoff(0, 1);
++}
++
++#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I)
++void sunxi_board_init(void)
++{
++      int power_failed = 0;
++#if !defined(CONFIG_SUN6I) && !defined(CONFIG_SUN8I)
++      unsigned long ramsize;
++#endif
++
++#ifdef CONFIG_AXP152_POWER
++      power_failed = axp152_init();
++      power_failed |= axp152_set_dcdc2(1400);
++      power_failed |= axp152_set_dcdc3(1500);
++      power_failed |= axp152_set_dcdc4(1250);
++      power_failed |= axp152_set_ldo2(3000);
++#endif
++#ifdef CONFIG_AXP209_POWER
++      power_failed |= axp209_init();
++      power_failed |= axp209_set_dcdc2(1400);
++#ifdef CONFIG_FAST_MBUS
++      power_failed |= axp209_set_dcdc3(1300);
++#else
++      power_failed |= axp209_set_dcdc3(1250);
++#endif
++      power_failed |= axp209_set_ldo2(3000);
++      power_failed |= axp209_set_ldo3(2800);
++      power_failed |= axp209_set_ldo4(2800);
++#endif
++#ifdef CONFIG_AXP221_POWER
++      power_failed = axp221_init();
++      power_failed |= axp221_set_dcdc1(3300);
++      power_failed |= axp221_set_dcdc2(1200);
++      power_failed |= axp221_set_dcdc3(1260);
++      power_failed |= axp221_set_dcdc4(1200);
++      power_failed |= axp221_set_dcdc5(1500);
++#ifdef CONFIG_ENABLE_DLDO1_POWER
++      power_failed |= axp221_set_dldo1(3300);
++#endif
++#endif
++
++#if !defined(CONFIG_SUN6I) && !defined(CONFIG_SUN8I)
++      printf("DRAM:");
++      ramsize = sunxi_dram_init();
++      printf(" %lu MiB\n", ramsize >> 20);
++      if (!ramsize)
++              hang();
++
++      /*
++       * Only clock up the CPU to full speed if we are reasonably
++       * assured it's being powered with suitable core voltage
++       */
++      if (!power_failed)
++              clock_set_pll1(CONFIG_CLK_FULL_SPEED);
++      else
++              printf("Failed to set core voltage! Can't set CPU frequency\n");
++#endif
++}
++#endif
++
++#if defined(CONFIG_SPL_OS_BOOT) && defined(CONFIG_AXP209_POWER)
++int spl_start_uboot(void)
++{
++      if (axp209_poweron_by_dc())
++              return 0;
++      axp209_power_button(); /* Clear any pending button event */
++      mdelay(100);
++      return axp209_power_button();
++}
++#endif
++
++#ifdef CONFIG_SPL_DISPLAY_PRINT
++void spl_display_print(void)
++{
++      printf("Board: %s\n", CONFIG_SYS_BOARD_NAME);
++}
++#endif
++
++#ifdef CONFIG_MISC_INIT_R
++int misc_init_r(void)
++{
++      if (!getenv("ethaddr")) {
++              uint32_t reg_val = readl(SUNXI_SID_BASE);
++
++              if (reg_val) {
++                      uint8_t mac_addr[6];
++
++                      mac_addr[0] = 0x02; /* Non OUI / registered MAC address */
++                      mac_addr[1] = (reg_val >>  0) & 0xff;
++                      reg_val = readl(SUNXI_SID_BASE + 0x0c);
++                      mac_addr[2] = (reg_val >> 24) & 0xff;
++                      mac_addr[3] = (reg_val >> 16) & 0xff;
++                      mac_addr[4] = (reg_val >>  8) & 0xff;
++                      mac_addr[5] = (reg_val >>  0) & 0xff;
++
++                      eth_setenv_enetaddr("ethaddr", mac_addr);
++              }
++      }
++
++      return 0;
++}
++#endif
+diff -ruN u-boot-2014.04/board/sunxi/dram_a10_olinuxino_l.c u-boot-sunxi/board/sunxi/dram_a10_olinuxino_l.c
+--- u-boot-2014.04/board/sunxi/dram_a10_olinuxino_l.c  1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_a10_olinuxino_l.c    2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 480,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 16,
++      .cas = 6,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 512,
++      .tpr0 = 0x30926692,
++      .tpr1 = 0x1090,
++      .tpr2 = 0x1a0c8,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_a13_oli_micro.c u-boot-sunxi/board/sunxi/dram_a13_oli_micro.c
+--- u-boot-2014.04/board/sunxi/dram_a13_oli_micro.c    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_a13_oli_micro.c      2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,32 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 408,
++      .type = 3,
++      .rank_num = 1,
++      .density = 2048,
++      .io_width = 16,
++      .bus_width = 16,
++      .cas = 9,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 256,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0,
++      .emr2 = 0x10,
++      .emr3 = 0,
++
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_a13_olinuxino.c u-boot-sunxi/board/sunxi/dram_a13_olinuxino.c
+--- u-boot-2014.04/board/sunxi/dram_a13_olinuxino.c    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_a13_olinuxino.c      2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 408,
++      .type = 3,
++      .rank_num = 1,
++      .density = 2048,
++      .io_width = 8,
++      .bus_width = 16,
++      .cas = 9,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 512,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_a20_olinuxino_l2.c u-boot-sunxi/board/sunxi/dram_a20_olinuxino_l2.c
+--- u-boot-2014.04/board/sunxi/dram_a20_olinuxino_l2.c 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_a20_olinuxino_l2.c   2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include "common.h"
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 480,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 0x7f,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_a20_olinuxino_l.c u-boot-sunxi/board/sunxi/dram_a20_olinuxino_l.c
+--- u-boot-2014.04/board/sunxi/dram_a20_olinuxino_l.c  1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_a20_olinuxino_l.c    2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include "common.h"
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 480,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 16,
++      .cas = 9,
++      .zq = 0x7f,
++      .odt_en = 0,
++      .size = 512,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_ainol_aw1.c u-boot-sunxi/board/sunxi/dram_ainol_aw1.c
+--- u-boot-2014.04/board/sunxi/dram_ainol_aw1.c        1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_ainol_aw1.c  2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include "common.h"
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 432,
++      .type = 3,
++      .rank_num = 1,
++      .density = 2048,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 0x7b,
++      .odt_en = 0,
++      .size = 512,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 1,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_auxtek_t003.c u-boot-sunxi/board/sunxi/dram_auxtek_t003.c
+--- u-boot-2014.04/board/sunxi/dram_auxtek_t003.c      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_auxtek_t003.c        2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 408,
++      .type = 3,
++      .rank_num = 1,
++      .density = 2048,
++      .io_width = 8,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_cubieboard.c u-boot-sunxi/board/sunxi/dram_cubieboard.c
+--- u-boot-2014.04/board/sunxi/dram_cubieboard.c       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_cubieboard.c 2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 480,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 6,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x30926692,
++      .tpr1 = 0x1090,
++      .tpr2 = 0x1a0c8,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0,
++      .emr2 = 0,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_cubietruck.c u-boot-sunxi/board/sunxi/dram_cubietruck.c
+--- u-boot-2014.04/board/sunxi/dram_cubietruck.c       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_cubietruck.c 2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 432,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 8,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 0x7f,
++      .odt_en = 0,
++      .size = 2048,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0x0,
++      .tpr4 = 0x1,
++      .tpr5 = 0x0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0x0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_eu3000.c u-boot-sunxi/board/sunxi/dram_eu3000.c
+--- u-boot-2014.04/board/sunxi/dram_eu3000.c   1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_eu3000.c     2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include "common.h"
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 432,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 0x7b,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 1,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_forfun_q88db.c u-boot-sunxi/board/sunxi/dram_forfun_q88db.c
+--- u-boot-2014.04/board/sunxi/dram_forfun_q88db.c     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_forfun_q88db.c       2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include "common.h"
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 384,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 16,
++      .cas = 9,
++      .zq = 0x7b,
++      .odt_en = 0,
++      .size = 512,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_gooseberry_a721.c u-boot-sunxi/board/sunxi/dram_gooseberry_a721.c
+--- u-boot-2014.04/board/sunxi/dram_gooseberry_a721.c  1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_gooseberry_a721.c    2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 360,
++      .type = 3,
++      .rank_num = 1,
++      .density = 1024,
++      .io_width = 8,
++      .bus_width = 32,
++      .cas = 6,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 512,
++      .tpr0 = 0x30926692,
++      .tpr1 = 0x1090,
++      .tpr2 = 0x1a0c8,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_h6.c u-boot-sunxi/board/sunxi/dram_h6.c
+--- u-boot-2014.04/board/sunxi/dram_h6.c       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_h6.c 2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 360,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 6,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x30926692,
++      .tpr1 = 0x1090,
++      .tpr2 = 0x1a0c8,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_hackberry.c u-boot-sunxi/board/sunxi/dram_hackberry.c
+--- u-boot-2014.04/board/sunxi/dram_hackberry.c        1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_hackberry.c  2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 408,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 6,
++      .zq = 123,
++      .odt_en = 1,
++      .size = 1024,
++      .tpr0 = 0x30926692,
++      .tpr1 = 0x1090,
++      .tpr2 = 0x1a0c8,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0,
++      .emr2 = 0,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_icou_fatty_i.c u-boot-sunxi/board/sunxi/dram_icou_fatty_i.c
+--- u-boot-2014.04/board/sunxi/dram_icou_fatty_i.c     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_icou_fatty_i.c       2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include "common.h"
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 384,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 0x7f,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 1,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_inet_k70hc.c u-boot-sunxi/board/sunxi/dram_inet_k70hc.c
+--- u-boot-2014.04/board/sunxi/dram_inet_k70hc.c       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_inet_k70hc.c 2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 384,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 0x12331a7f,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 1,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_linksprite_pcduino3.c u-boot-sunxi/board/sunxi/dram_linksprite_pcduino3.c
+--- u-boot-2014.04/board/sunxi/dram_linksprite_pcduino3.c      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_linksprite_pcduino3.c        2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 480,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 0x7a,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0x0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_megafeis_a08.c u-boot-sunxi/board/sunxi/dram_megafeis_a08.c
+--- u-boot-2014.04/board/sunxi/dram_megafeis_a08.c     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_megafeis_a08.c       2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 432,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 16,
++      .cas = 9,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 512,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_merrii_m2.c u-boot-sunxi/board/sunxi/dram_merrii_m2.c
+--- u-boot-2014.04/board/sunxi/dram_merrii_m2.c        1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_merrii_m2.c  2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 432,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 127,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0x0,
++      .tpr4 = 0x0,
++      .tpr5 = 0x0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0x0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_mini_x_a10s.c u-boot-sunxi/board/sunxi/dram_mini_x_a10s.c
+--- u-boot-2014.04/board/sunxi/dram_mini_x_a10s.c      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_mini_x_a10s.c        2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 432,
++      .type = 3,
++      .rank_num = 1,
++      .density = 2048,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_mk802_a10s.c u-boot-sunxi/board/sunxi/dram_mk802_a10s.c
+--- u-boot-2014.04/board/sunxi/dram_mk802_a10s.c       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_mk802_a10s.c 2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 432,
++      .type = 3,
++      .rank_num = 1,
++      .density = 2048,
++      .io_width = 8,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_mk802ii_a20.c u-boot-sunxi/board/sunxi/dram_mk802ii_a20.c
+--- u-boot-2014.04/board/sunxi/dram_mk802ii_a20.c      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_mk802ii_a20.c        2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include "common.h"
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 360,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 0x7f,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_olimex_a13_som.c u-boot-sunxi/board/sunxi/dram_olimex_a13_som.c
+--- u-boot-2014.04/board/sunxi/dram_olimex_a13_som.c   1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_olimex_a13_som.c     2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,32 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 408,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 16,
++      .cas = 9,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 512,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0,
++      .emr2 = 0x10,
++      .emr3 = 0,
++
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_pov_protab2.c u-boot-sunxi/board/sunxi/dram_pov_protab2.c
+--- u-boot-2014.04/board/sunxi/dram_pov_protab2.c      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_pov_protab2.c        2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 432,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 6,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x30926692,
++      .tpr1 = 0x1090,
++      .tpr2 = 0x1a0c8,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0,
++      .emr2 = 0,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_pov_protab2_xxl.c u-boot-sunxi/board/sunxi/dram_pov_protab2_xxl.c
+--- u-boot-2014.04/board/sunxi/dram_pov_protab2_xxl.c  1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_pov_protab2_xxl.c    2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 432,
++      .type = 3,
++      .rank_num = 1,
++      .density = 2048,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 6,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 512,
++      .tpr0 = 0x30926692,
++      .tpr1 = 0x1090,
++      .tpr2 = 0x1a0c8,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0,
++      .emr2 = 0,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_pov_tab_p703.c u-boot-sunxi/board/sunxi/dram_pov_tab_p703.c
+--- u-boot-2014.04/board/sunxi/dram_pov_tab_p703.c     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_pov_tab_p703.c       2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 360,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 16,
++      .cas = 9,
++      .zq = 0x56b9697b,
++      .odt_en = 0,
++      .size = 512,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_r7dongle.c u-boot-sunxi/board/sunxi/dram_r7dongle.c
+--- u-boot-2014.04/board/sunxi/dram_r7dongle.c 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_r7dongle.c   2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 384,
++      .type = 3,
++      .rank_num = 1,
++      .density = 2048,
++      .io_width = 8,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x04,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_sanei_n90.c u-boot-sunxi/board/sunxi/dram_sanei_n90.c
+--- u-boot-2014.04/board/sunxi/dram_sanei_n90.c        1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_sanei_n90.c  2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,30 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 456,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 8,
++      .bus_width = 32,
++      .cas = 6,
++      .zq = 123,
++      .odt_en = 1,
++      .size = 1024,
++      .tpr0 = 0x30926692,
++      .tpr1 = 0x1090,
++      .tpr2 = 0x1a0c8,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0,
++      .emr3 = 0,
++};
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_semitime_g2.c u-boot-sunxi/board/sunxi/dram_semitime_g2.c
+--- u-boot-2014.04/board/sunxi/dram_semitime_g2.c      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_semitime_g2.c        2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include "common.h"
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 432,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 0x7b,
++      .odt_en = 0,
++      .size = 1024, /* in MiB */
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0x00,
++      .tpr4 = 0x00,
++      .tpr5 = 0x00,
++      .emr1 = 0x00,
++      .emr2 = 0x10,
++      .emr3 = 0x00,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_312_1024_iow8.c u-boot-sunxi/board/sunxi/dram_sun4i_312_1024_iow8.c
+--- u-boot-2014.04/board/sunxi/dram_sun4i_312_1024_iow8.c      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_sun4i_312_1024_iow8.c        2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 312,
++      .type = 3,
++      .rank_num = 1,
++      .density = 2048,
++      .io_width = 8,
++      .bus_width = 32,
++      .cas = 6,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x30926692,
++      .tpr1 = 0x1090,
++      .tpr2 = 0x1a0c8,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0,
++      .emr2 = 0,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_360_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun4i_360_1024_iow16.c
+--- u-boot-2014.04/board/sunxi/dram_sun4i_360_1024_iow16.c     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_sun4i_360_1024_iow16.c       2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 360,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 6,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x30926692,
++      .tpr1 = 0x1090,
++      .tpr2 = 0x1a0c8,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0,
++      .emr2 = 0,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_360_1024_iow8.c u-boot-sunxi/board/sunxi/dram_sun4i_360_1024_iow8.c
+--- u-boot-2014.04/board/sunxi/dram_sun4i_360_1024_iow8.c      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_sun4i_360_1024_iow8.c        2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 360,
++      .type = 3,
++      .rank_num = 1,
++      .density = 2048,
++      .io_width = 8,
++      .bus_width = 32,
++      .cas = 6,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x30926692,
++      .tpr1 = 0x1090,
++      .tpr2 = 0x1a0c8,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0,
++      .emr2 = 0,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_360_512.c u-boot-sunxi/board/sunxi/dram_sun4i_360_512.c
+--- u-boot-2014.04/board/sunxi/dram_sun4i_360_512.c    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_sun4i_360_512.c      2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 360,
++      .type = 3,
++      .rank_num = 1,
++      .density = 2048,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 6,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 512,
++      .tpr0 = 0x30926692,
++      .tpr1 = 0x1090,
++      .tpr2 = 0x1a0c8,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0,
++      .emr2 = 0,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_384_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun4i_384_1024_iow16.c
+--- u-boot-2014.04/board/sunxi/dram_sun4i_384_1024_iow16.c     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_sun4i_384_1024_iow16.c       2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 384,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 6,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x30926692,
++      .tpr1 = 0x1090,
++      .tpr2 = 0x1a0c8,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_384_1024_iow8.c u-boot-sunxi/board/sunxi/dram_sun4i_384_1024_iow8.c
+--- u-boot-2014.04/board/sunxi/dram_sun4i_384_1024_iow8.c      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_sun4i_384_1024_iow8.c        2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 384,
++      .type = 3,
++      .rank_num = 1,
++      .density = 2048,
++      .io_width = 8,
++      .bus_width = 32,
++      .cas = 6,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x30926692,
++      .tpr1 = 0x1090,
++      .tpr2 = 0x1a0c8,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_408_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun4i_408_1024_iow16.c
+--- u-boot-2014.04/board/sunxi/dram_sun4i_408_1024_iow16.c     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_sun4i_408_1024_iow16.c       2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 408,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 6,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x30926692,
++      .tpr1 = 0x1090,
++      .tpr2 = 0x1a0c8,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_408_1024_iow8.c u-boot-sunxi/board/sunxi/dram_sun4i_408_1024_iow8.c
+--- u-boot-2014.04/board/sunxi/dram_sun4i_408_1024_iow8.c      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_sun4i_408_1024_iow8.c        2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 408,
++      .type = 3,
++      .rank_num = 1,
++      .density = 2048,
++      .io_width = 8,
++      .bus_width = 32,
++      .cas = 6,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x30926692,
++      .tpr1 = 0x1090,
++      .tpr2 = 0x1a0c8,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_408_512.c u-boot-sunxi/board/sunxi/dram_sun4i_408_512.c
+--- u-boot-2014.04/board/sunxi/dram_sun4i_408_512.c    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_sun4i_408_512.c      2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 408,
++      .type = 3,
++      .rank_num = 1,
++      .density = 2048,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 6,
++      .zq = 0x7b,
++      .odt_en = 0,
++      .size = 512,
++      .tpr0 = 0x30926692,
++      .tpr1 = 0x1090,
++      .tpr2 = 0x1a0c8,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_sun5i_408_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun5i_408_1024_iow16.c
+--- u-boot-2014.04/board/sunxi/dram_sun5i_408_1024_iow16.c     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_sun5i_408_1024_iow16.c       2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 408,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 0x7b,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_sun5i_408_512_busw16_iow8.c u-boot-sunxi/board/sunxi/dram_sun5i_408_512_busw16_iow8.c
+--- u-boot-2014.04/board/sunxi/dram_sun5i_408_512_busw16_iow8.c        1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_sun5i_408_512_busw16_iow8.c  2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 408,
++      .type = 3,
++      .rank_num = 1,
++      .density = 2048,
++      .io_width = 8,
++      .bus_width = 16,
++      .cas = 9,
++      .zq = 123,
++      .odt_en = 1,
++      .size = 512,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_sun5i_432_512_busw16_iow16.c u-boot-sunxi/board/sunxi/dram_sun5i_432_512_busw16_iow16.c
+--- u-boot-2014.04/board/sunxi/dram_sun5i_432_512_busw16_iow16.c       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_sun5i_432_512_busw16_iow16.c 2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 432,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 16,
++      .cas = 9,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 512,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_sun7i_360_512_busw16_iow16.c u-boot-sunxi/board/sunxi/dram_sun7i_360_512_busw16_iow16.c
+--- u-boot-2014.04/board/sunxi/dram_sun7i_360_512_busw16_iow16.c       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_sun7i_360_512_busw16_iow16.c 2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include "common.h"
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 360,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 16,
++      .cas = 9,
++      .zq = 0x7f,
++      .odt_en = 0,
++      .size = 512,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_sun7i_384_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun7i_384_1024_iow16.c
+--- u-boot-2014.04/board/sunxi/dram_sun7i_384_1024_iow16.c     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_sun7i_384_1024_iow16.c       2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include "common.h"
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 384,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 0x7f,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_sun7i_384_512_busw16_iow16.c u-boot-sunxi/board/sunxi/dram_sun7i_384_512_busw16_iow16.c
+--- u-boot-2014.04/board/sunxi/dram_sun7i_384_512_busw16_iow16.c       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_sun7i_384_512_busw16_iow16.c 2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include "common.h"
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 384,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 16,
++      .cas = 9,
++      .zq = 0x7f,
++      .odt_en = 0,
++      .size = 512,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_sun7i_432_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun7i_432_1024_iow16.c
+--- u-boot-2014.04/board/sunxi/dram_sun7i_432_1024_iow16.c     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_sun7i_432_1024_iow16.c       2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include "common.h"
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 432,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 0x7f,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 1,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_sun7i_460_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun7i_460_1024_iow16.c
+--- u-boot-2014.04/board/sunxi/dram_sun7i_460_1024_iow16.c     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_sun7i_460_1024_iow16.c       2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 480,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 0x7f,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0x0,
++      .tpr4 = 0x1,
++      .tpr5 = 0x0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0x0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_wexler_tab_7200.c u-boot-sunxi/board/sunxi/dram_wexler_tab_7200.c
+--- u-boot-2014.04/board/sunxi/dram_wexler_tab_7200.c  1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_wexler_tab_7200.c    2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include "common.h"
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 384,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 0x7f,
++      .odt_en = 1,
++      .size = 1024,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 1,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_wobo_i5.c u-boot-sunxi/board/sunxi/dram_wobo_i5.c
+--- u-boot-2014.04/board/sunxi/dram_wobo_i5.c  1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_wobo_i5.c    2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 432,
++      .type = 3,
++      .rank_num = 1,
++      .density = 2048,
++      .io_width = 8,
++      .bus_width = 32,
++      .cas = 9,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x04,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_xzpad700.c u-boot-sunxi/board/sunxi/dram_xzpad700.c
+--- u-boot-2014.04/board/sunxi/dram_xzpad700.c 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_xzpad700.c   2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 408,
++      .type = 3,
++      .rank_num = 1,
++      .density = 4096,
++      .io_width = 16,
++      .bus_width = 16,
++      .cas = 9,
++      .zq = 0x56b9487b,
++      .odt_en = 0,
++      .size = 512,
++      .tpr0 = 0x42d899b7,
++      .tpr1 = 0xa090,
++      .tpr2 = 0x22a00,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0x10,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/dram_zatab.c u-boot-sunxi/board/sunxi/dram_zatab.c
+--- u-boot-2014.04/board/sunxi/dram_zatab.c    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/dram_zatab.c      2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++      .clock = 432,
++      .type = 3,
++      .rank_num = 1,
++      .density = 2048,
++      .io_width = 8,
++      .bus_width = 32,
++      .cas = 6,
++      .zq = 123,
++      .odt_en = 0,
++      .size = 1024,
++      .tpr0 = 0x30926692,
++      .tpr1 = 0x1090,
++      .tpr2 = 0x1a0c8,
++      .tpr3 = 0,
++      .tpr4 = 0,
++      .tpr5 = 0,
++      .emr1 = 0x4,
++      .emr2 = 0,
++      .emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++      return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2014.04/board/sunxi/gmac.c u-boot-sunxi/board/sunxi/gmac.c
+--- u-boot-2014.04/board/sunxi/gmac.c  1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/gmac.c    2014-09-06 16:58:36.165953115 +0200
+@@ -0,0 +1,43 @@
++#include <common.h>
++#include <netdev.h>
++#include <miiphy.h>
++#include <asm/gpio.h>
++#include <asm/io.h>
++#include <asm/arch/clock.h>
++#include <asm/arch/gpio.h>
++
++int sunxi_gmac_initialize(bd_t *bis)
++{
++      int pin;
++      struct sunxi_ccm_reg *const ccm =
++              (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
++
++      /* Set up clock gating */
++      setbits_le32(&ccm->ahb_gate1, 0x1 << AHB_GATE_OFFSET_GMAC);
++
++      /* Set MII clock */
++#ifdef CONFIG_RGMII
++      setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII |
++              CCM_GMAC_CTRL_GPIT_RGMII);
++#else
++      setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_MII |
++              CCM_GMAC_CTRL_GPIT_MII);
++#endif
++
++      /* Configure pin mux settings for GMAC */
++      for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) {
++#ifdef CONFIG_RGMII
++              /* skip unused pins in RGMII mode */
++              if (pin == SUNXI_GPA(9) || pin == SUNXI_GPA(14))
++                      continue;
++#endif
++              sunxi_gpio_set_cfgpin(pin, SUN7I_GPA0_GMAC);
++              sunxi_gpio_set_drv(pin, 3);
++      }
++
++#ifdef CONFIG_RGMII
++      return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_RGMII);
++#else
++      return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_MII);
++#endif
++}
+diff -ruN u-boot-2014.04/board/sunxi/Makefile u-boot-sunxi/board/sunxi/Makefile
+--- u-boot-2014.04/board/sunxi/Makefile        1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/board/sunxi/Makefile  2014-09-06 16:58:36.161953116 +0200
+@@ -0,0 +1,95 @@
++#
++# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
++#
++# Based on some other board Makefile
++#
++# (C) Copyright 2000-2003
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# SPDX-License-Identifier:    GPL-2.0+
++#
++obj-y += board.o
++obj-$(CONFIG_SUNXI_GMAC)      += gmac.o
++obj-$(CONFIG_A10_MID_1GB)     += dram_sun4i_360_1024_iow16.o
++obj-$(CONFIG_A10_OLINUXINO_L) += dram_a10_olinuxino_l.o
++obj-$(CONFIG_A10S_OLINUXINO_M)        += dram_sun5i_432_512_busw16_iow16.o
++obj-$(CONFIG_A13_OLINUXINO)   += dram_a13_olinuxino.o
++obj-$(CONFIG_A13_OLINUXINOM)  += dram_a13_oli_micro.o
++obj-$(CONFIG_A13_MID)         += dram_sun5i_408_512_busw16_iow8.o
++obj-$(CONFIG_A20_OLINUXINO_L) += dram_a20_olinuxino_l.o
++obj-$(CONFIG_A20_OLINUXINO_L2)        += dram_a20_olinuxino_l2.o
++obj-$(CONFIG_A20_OLINUXINO_M) += dram_sun7i_384_1024_iow16.o
++obj-$(CONFIG_A20_SOM)         += dram_sun7i_384_1024_iow16.o
++obj-$(CONFIG_AINOL_AW1)               += dram_ainol_aw1.o
++obj-$(CONFIG_AMPE_A76)                += dram_sun5i_432_512_busw16_iow16.o
++obj-$(CONFIG_AUXTEK_T003)     += dram_auxtek_t003.o
++obj-$(CONFIG_AUXTEK_T004)     += dram_sun5i_432_512_busw16_iow16.o
++obj-$(CONFIG_BA10_TV_BOX)     += dram_sun4i_384_1024_iow8.o
++obj-$(CONFIG_COBY_MID7042)    += dram_sun4i_408_1024_iow16.o
++obj-$(CONFIG_COBY_MID8042)    += dram_sun4i_360_1024_iow16.o
++obj-$(CONFIG_COBY_MID9742)    += dram_sun4i_408_1024_iow16.o
++obj-$(CONFIG_MARSBOARD_A10)   += dram_sun4i_360_1024_iow16.o
++obj-$(CONFIG_MARSBOARD_A20)   += dram_sun4i_360_1024_iow16.o
++obj-$(CONFIG_CUBIEBOARD)      += dram_cubieboard.o
++obj-$(CONFIG_CUBIEBOARD2)     += dram_sun7i_460_1024_iow16.o
++obj-$(CONFIG_BANANAPI)                += dram_sun7i_432_1024_iow16.o
++obj-$(CONFIG_CUBIETRUCK)      += dram_cubietruck.o
++obj-$(CONFIG_DNS_M82)         += dram_sun4i_360_1024_iow16.o
++obj-$(CONFIG_EOMA68_A10)      += dram_sun4i_360_1024_iow8.o
++obj-$(CONFIG_EOMA68_A20)      += dram_sun7i_384_1024_iow16.o
++obj-$(CONFIG_EU3000)          += dram_eu3000.o
++obj-$(CONFIG_FORFUN_Q88DB)    += dram_forfun_q88db.o
++obj-$(CONFIG_GOOSEBERRY_A721) += dram_gooseberry_a721.o
++obj-$(CONFIG_H6)              += dram_h6.o
++obj-$(CONFIG_HACKBERRY)               += dram_hackberry.o
++obj-$(CONFIG_HBD_MID_S906)    += dram_sun7i_432_1024_iow16.o
++obj-$(CONFIG_HCORE_HC860)     += dram_sun4i_384_1024_iow16.o
++obj-$(CONFIG_HYUNDAI_A7)      += dram_sun4i_360_512.o
++obj-$(CONFIG_A7HD)            += dram_sun4i_360_1024_iow8.o
++obj-$(CONFIG_I12_TVBOX)               += dram_sun7i_384_1024_iow16.o
++obj-$(CONFIG_ICOU_FATTY_I)    += dram_icou_fatty_i.o
++obj-$(CONFIG_INTERRA3)                += dram_mk802ii_a20.o
++obj-$(CONFIG_INET_86VZ)               += dram_sun5i_432_512_busw16_iow16.o
++obj-$(CONFIG_INET97F_II)      += dram_sun4i_408_512.o
++obj-$(CONFIG_INET_K70HC)      += dram_inet_k70hc.o
++obj-$(CONFIG_ITEADA10)                += dram_cubieboard.o
++obj-$(CONFIG_ITEADA20)                += dram_sun7i_460_1024_iow16.o
++obj-$(CONFIG_JESURUN_Q5)      += dram_sun4i_312_1024_iow8.o
++obj-$(CONFIG_K1001L1C)                += dram_sun7i_384_1024_iow16.o
++obj-$(CONFIG_KURIO_7S)                += dram_sun7i_432_1024_iow16.o
++obj-$(CONFIG_LANGCENT_H6S)    += dram_sun7i_360_512_busw16_iow16.o
++obj-$(CONFIG_LINKSPRITE_PCDUINO3)     += dram_linksprite_pcduino3.o
++obj-$(CONFIG_MEFAFEIS_A08)    += dram_megafeis_a08.o
++obj-$(CONFIG_MELE_A1000)      += dram_sun4i_360_512.o
++obj-$(CONFIG_MELE_A1000G)     += dram_sun4i_360_1024_iow8.o
++obj-$(CONFIG_MELE_A3700)      += dram_sun4i_360_1024_iow8.o
++obj-$(CONFIG_MERRII_HUMMINGBIRD_A20)  += dram_sun7i_460_1024_iow16.o
++obj-$(CONFIG_MINI_X)          += dram_sun4i_360_512.o
++obj-$(CONFIG_MINI_X_1GB)      += dram_sun4i_360_1024_iow16.o
++obj-$(CONFIG_MINI_X_A10S)     += dram_mini_x_a10s.o
++obj-$(CONFIG_MK802)           += dram_sun4i_360_512.o
++obj-$(CONFIG_MK802_1GB)               += dram_sun4i_360_1024_iow16.o
++obj-$(CONFIG_MK802_A10S)      += dram_mk802_a10s.o
++obj-$(CONFIG_MK802II)         += dram_sun4i_408_1024_iow8.o
++obj-$(CONFIG_MK802II_A20)     += dram_mk802ii_a20.o
++obj-$(CONFIG_MK808C_A20)      += dram_sun7i_384_1024_iow16.o
++obj-$(CONFIG_OLIMEX_A13_SOM)  += dram_olimex_a13_som.o
++obj-$(CONFIG_PCDUINO)         += dram_sun4i_408_1024_iow8.o
++obj-$(CONFIG_PENGPOD700)      += dram_sun4i_384_1024_iow8.o
++obj-$(CONFIG_PENGPOD1000)     += dram_sun4i_408_1024_iow16.o
++obj-$(CONFIG_PINERIVER-H25)   += dram_sun5i_408_1024_iow16.o
++obj-$(CONFIG_POV_TAB_P703)    += dram_pov_tab_p703.o
++obj-$(CONFIG_POV_PROTAB2)     += dram_pov_protab2.o
++obj-$(CONFIG_POV_PROTAB2_XXL) += dram_pov_protab2_xxl.o
++obj-$(CONFIG_QT840A)          += dram_sun7i_384_512_busw16_iow16.o
++obj-$(CONFIG_R7DONGLE)                += dram_r7dongle.o
++obj-$(CONFIG_SANEI_N90)               += dram_sanei_n90.o
++obj-$(CONFIG_SEMITIME_G2)     += dram_semitime_g2.o
++obj-$(CONFIG_TZX_Q8_713B6)    += dram_sun5i_408_512_busw16_iow8.o
++obj-$(CONFIG_TZX_Q8_713B7)    += dram_sun5i_408_512_busw16_iow8.o
++obj-$(CONFIG_UHOST_U1A)               += dram_sun4i_360_1024_iow8.o
++obj-$(CONFIG_WEXLER_TAB_7200) += dram_wexler_tab_7200.o
++obj-$(CONFIG_WOBO_I5)         += dram_wobo_i5.o
++obj-$(CONFIG_XZPAD700)                += dram_xzpad700.o
++obj-$(CONFIG_ZATAB)           += dram_zatab.o
++obj-$(CONFIG_MERRII_M2)               += dram_merrii_m2.o
+diff -ruN u-boot-2014.04/boards.cfg u-boot-sunxi/boards.cfg
+--- u-boot-2014.04/boards.cfg  2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/boards.cfg    2014-09-06 16:58:36.185953115 +0200
+@@ -371,6 +371,111 @@
+ Active  arm         armv7          s5pc1xx     samsung         goni                s5p_goni                             -                                                                                                                                 Mateusz Zalega <m.zalega@samsung.com>
+ Active  arm         armv7          s5pc1xx     samsung         smdkc100            smdkc100                             -                                                                                                                                 Minkyu Kang <mk7.kang@samsung.com>
+ Active  arm         armv7          socfpga     altera          socfpga             socfpga_cyclone5                     -                                                                                                                                 -
++Active  arm         armv7          sunxi       -               sunxi               A10_MID_1GB                          sun4i:A10_MID_1GB,SPL                                                                                                             -
++Active  arm         armv7          sunxi       -               sunxi               A10-OLinuXino-Lime                   sun4i:A10_OLINUXINO_L,STATUSLED=226,SPL,SUNXI_EMAC                                                                                -
++Active  arm         armv7          sunxi       -               sunxi               A10s-OLinuXino-M                     sun5i:A10S_OLINUXINO_M,STATUSLED=131,AXP152_POWER,CONS_INDEX=1,SPL,SUNXI_EMAC                                                     -
++Active  arm         armv7          sunxi       -               sunxi               A10s-OLinuXino-M_FEL                 sun5i:A10S_OLINUXINO_M,STATUSLED=131,AXP152_POWER,CONS_INDEX=1,SPL_FEL,SUNXI_EMAC                                                 -
++Active  arm         armv7          sunxi       -               sunxi               A13-OLinuXino                        sun5i:A13_OLINUXINO,SPL,STATUSLED=201,CONS_INDEX=2                                                                                -
++Active  arm         armv7          sunxi       -               sunxi               A13-OLinuXino_FEL                    sun5i:A13_OLINUXINO,SPL_FEL,STATUSLED=201,CONS_INDEX=2                                                                            -
++Active  arm         armv7          sunxi       -               sunxi               A13-OLinuXino_FEL_sdcon              sun5i:A13_OLINUXINO,SPL_FEL,STATUSLED=201,UART0_PORT_F                                                                            -
++Active  arm         armv7          sunxi       -               sunxi               A13-OLinuXinoM                       sun5i:A13_OLINUXINOM,SPL,NO_AXP,STATUSLED=201,CONS_INDEX=2                                                                        -
++Active  arm         armv7          sunxi       -               sunxi               A13-OLinuXinoM_FEL                   sun5i:A13_OLINUXINOM,SPL_FEL,NO_AXP,STATUSLED=201,CONS_INDEX=2                                                                    -
++Active  arm         armv7          sunxi       -               sunxi               A13_MID                              sun5i:A13_MID,SPL,CONS_INDEX=2                                                                                                    -
++Active  arm         armv7          sunxi       -               sunxi               A20-OLinuXino_Lime                   sun7i:A20_OLINUXINO_L,CONS_INDEX=1,STATUSLED=226,SPL,SUNXI_EMAC                                                                   -
++Active  arm         armv7          sunxi       -               sunxi               A20-OLinuXino_Lime2                  sun7i:A20_OLINUXINO_L2,CONS_INDEX=1,STATUSLED=226,SPL,SUNXI_GMAC                                                                  -
++Active  arm         armv7          sunxi       -               sunxi               A20-OLinuXino_MICRO                  sun7i:A20_OLINUXINO_M,CONS_INDEX=1,STATUSLED=226,SPL,SUNXI_EMAC                                                                   -
++Active  arm         armv7          sunxi       -               sunxi               A20-OLinuXino_MICRO_FEL              sun7i:A20_OLINUXINO_M,CONS_INDEX=1,STATUSLED=226,SPL_FEL,SUNXI_EMAC                                                               -
++Active  arm         armv7          sunxi       -               sunxi               A20-SOM                              sun7i:A20_SOM,SPL,SUNXI_GMAC,RGMII,STATUSLED1=245,FAST_MBUS                                                                       -
++Active  arm         armv7          sunxi       -               sunxi               Ainol_AW1                            sun7i:AINOL_AW1,SPL                                                                                                               -
++Active  arm         armv7          sunxi       -               sunxi               Ampe_A76                             sun5i:AMPE_A76,SPL,CONS_INDEX=2                                                                                                   -
++Active  arm         armv7          sunxi       -               sunxi               Auxtek-T003                          sun5i:AUXTEK_T003,SPL,AXP152_POWER,STATUSLED=34                                                                                   -
++Active  arm         armv7          sunxi       -               sunxi               Auxtek-T004                          sun5i:AUXTEK_T004,SPL,AXP152_POWER,STATUSLED=34                                                                                   -
++Active  arm         armv7          sunxi       -               sunxi               ba10_tv_box                          sun4i:BA10_TV_BOX,SPL,SUNXI_EMAC                                                                                                  -
++Active  arm         armv7          sunxi       -               sunxi               Bananapi                             sun7i:BANANAPI,SPL,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),STATUSLED=244,STATUSLED1=245,FAST_MBUS                                   -
++Active  arm         armv7          sunxi       -               sunxi               Bananapi_FEL                         sun7i:BANANAPI,SPL_FEL,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),STATUSLED=244,STATUSLED1=245,FAST_MBUS                               -
++Active  arm         armv7          sunxi       -               sunxi               Coby_MID7042                         sun4i:COBY_MID7042,SPL                                                                                                            -
++Active  arm         armv7          sunxi       -               sunxi               Coby_MID8042                         sun4i:COBY_MID8042,SPL                                                                                                            -
++Active  arm         armv7          sunxi       -               sunxi               Coby_MID9742                         sun4i:COBY_MID9742,SPL                                                                                                            -
++Active  arm         armv7          sunxi       -               sunxi               Iteaduino_Plus_A10                   sun4i:ITEADA10,SPL,SUNXI_EMAC,STATUSLED=244,STATUSLED1=245                                                                        -
++Active  arm         armv7          sunxi       -               sunxi               Iteaduino_Plus_A20                   sun7i:ITEADA20,SPL,SUNXI_EMAC,STATUSLED=244,STATUSLED1=245                                                                        -
++Active  arm         armv7          sunxi       -               sunxi               Colombus                             sun6i:COLOMBUS,AXP221_POWER,ENABLE_DLDO1_POWER                                                                                    -
++Active  arm         armv7          sunxi       -               sunxi               Ippo_q8h                             sun8i:IPPO_Q8H,NO_AXP,CONS_INDEX=5                                                                                                -
++Active  arm         armv7          sunxi       -               sunxi               Cubieboard                           sun4i:CUBIEBOARD,SPL,SUNXI_EMAC,STATUSLED=244,STATUSLED1=245                                                                      -
++Active  arm         armv7          sunxi       -               sunxi               Cubieboard2                          sun7i:CUBIEBOARD2,SPL,SUNXI_GMAC,STATUSLED=244,STATUSLED1=245,FAST_MBUS                                                           -
++Active  arm         armv7          sunxi       -               sunxi               Cubieboard2_FEL                      sun7i:CUBIEBOARD2,SPL_FEL,SUNXI_GMAC,STATUSLED=244,STATUSLED1=245,FAST_MBUS                                                       -
++Active  arm         armv7          sunxi       -               sunxi               Cubietruck                           sun7i:CUBIETRUCK,SPL,SUNXI_GMAC,RGMII,STATUSLED=245,STATUSLED1=244,STATUSLED2=235,STATUSLED3=231,FAST_MBUS                        -
++Active  arm         armv7          sunxi       -               sunxi               Cubietruck_FEL                       sun7i:CUBIETRUCK,SPL_FEL,SUNXI_GMAC,RGMII,STATUSLED=245,STATUSLED1=244,STATUSLED2=235,STATUSLED3=231,FAST_MBUS                    -
++Active  arm         armv7          sunxi       -               sunxi               Cubieboard_FEL                       sun4i:CUBIEBOARD,SPL_FEL,SUNXI_EMAC,STATUSLED=244,STATUSLED1=245                                                                  -
++Active  arm         armv7          sunxi       -               sunxi               DNS_M82                              sun4i:DNS_M82,SPL                                                                                                                 -
++Active  arm         armv7          sunxi       -               sunxi               EOMA68_A10                           sun4i:EOMA68_A10,SPL,MMC_SUNXI_SLOT=3,SUNXI_EMAC                                                                                  -
++Active  arm         armv7          sunxi       -               sunxi               EOMA68_A10_FEL                       sun4i:EOMA68_A10,SPL_FEL,MMC_SUNXI_SLOT=3,SUNXI_EMAC                                                                              -
++Active  arm         armv7          sunxi       -               sunxi               EOMA68_A20                           sun7i:EOMA68_A20,SPL,MMC_SUNXI_SLOT=3,SUNXI_EMAC                                                                                  -
++Active  arm         armv7          sunxi       -               sunxi               EOMA68_A20_FEL                       sun7i:EOMA68_A20,SPL_FEL,MMC_SUNXI_SLOT=3,SUNXI_EMAC                                                                              -
++Active  arm         armv7          sunxi       -               sunxi               EU3000                               sun7i:EU3000,SPL                                                                                                                  -
++Active  arm         armv7          sunxi       -               sunxi               Forfun_Q88DB                         sun7i:FORFUN_Q88DB,SPL                                                                                                            -
++Active  arm         armv7          sunxi       -               sunxi               Gooseberry_A721                      sun4i:GOOSEBERRY_A721,SPL                                                                                                         -
++Active  arm         armv7          sunxi       -               sunxi               H6                                   sun4i:H6,SPL                                                                                                                      -
++Active  arm         armv7          sunxi       -               sunxi               Hackberry                            sun4i:HACKBERRY,SPL,SUNXI_EMAC,MACPWR=SUNXI_GPH(19)                                                                               -
++Active  arm         armv7          sunxi       -               sunxi               HBD_MID_S906                         sun7i:HBD_MID_S906,SPL                                                                                                            -
++Active  arm         armv7          sunxi       -               sunxi               HCore_HC860                          sun4i:HCORE_HC860,SPL                                                                                                             -
++Active  arm         armv7          sunxi       -               sunxi               Hyundai_A7                           sun4i:HYUNDAI_A7,SPL                                                                                                              -
++Active  arm         armv7          sunxi       -               sunxi               Hyundai_A7HD                         sun4i:A7HD,SPL                                                                                                                    -
++Active  arm         armv7          sunxi       -               sunxi               i12-tvbox                            sun7i:I12_TVBOX,SPL,FAST_MBUS,STATUSLED=244                                                                                       -
++Active  arm         armv7          sunxi       -               sunxi               ICOU_Fatty_I                         sun7i:ICOU_FATTY_I,SPL                                                                                                            -
++Active  arm         armv7          sunxi       -               sunxi               Interra-3                            sun7i:INTERRA3,SPL,SUNXI_GMAC,FAST_MBUS,MMC_SUNXI_SLOT=2                                                                          -
++Active  arm         armv7          sunxi       -               sunxi               INet_86VZ                            sun5i:INET_86VZ,SPL                                                                                                             -
++Active  arm         armv7          sunxi       -               sunxi               INet_86VZ_FEL                        sun5i:INET_86VZ,SPL_FEL,UART0_PORT_F                                                                                              -
++Active  arm         armv7          sunxi       -               sunxi               INet97F-II                           sun4i:INET97F_II,SPL                                                                                                              -
++Active  arm         armv7          sunxi       -               sunxi               INet_K70HC                           sun7i:INET_K70HC,SPL                                                                                                              -
++Active  arm         armv7          sunxi       -               sunxi               Jesurun-Q5                           sun4i:JESURUN_Q5,SPL,SUNXI_EMAC,STATUSLED=244                                                                                     -
++Active  arm         armv7          sunxi       -               sunxi               K1001L1C                             sun7i:K1001L1C,SPL                                                                                                                -
++Active  arm         armv7          sunxi       -               sunxi               Kurio_7S                             sun7i:KURIO_7S,SPL                                                                                                                -
++Active  arm         armv7          sunxi       -               sunxi               Langcent_H6S                         sun7i:LANGCENT_H6S,SPL                                                                                                            -
++Active  arm         armv7          sunxi       -               sunxi               Linksprite_pcDuino3                  sun7i:LINKSPRITE_PCDUINO3,SPL,SUNXI_GMAC,FAST_MBUS                                                                                -
++Active  arm         armv7          sunxi       -               sunxi               Marsboard_A10                        sun4i:MARSBOARD_A10,SPL,SUNXI_EMAC,NO_AXP                                                                                         -
++Active  arm         armv7          sunxi       -               sunxi               Marsboard_A20                        sun7i:MARSBOARD_A20,SPL,SUNXI_EMAC,NO_AXP                                                                                         -
++Active  arm         armv7          sunxi       -               sunxi               Marsboard_A20_debug                  sun7i:MARSBOARD_A20,SPL,SUNXI_EMAC,NO_AXP,SYS_SECONDARY_ON                                                                        -
++Active  arm         armv7          sunxi       -               sunxi               Megafeis_A08                         sun5i:MEFAFEIS_A08,SPL                                                                                                            -
++Active  arm         armv7          sunxi       -               sunxi               Mele_A1000                           sun4i:MELE_A1000,SPL,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),STATUSLED=234                                                                -
++Active  arm         armv7          sunxi       -               sunxi               Mele_A1000_FEL                       sun4i:MELE_A1000,SPL_FEL,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),STATUSLED=234                                                            -
++Active  arm         armv7          sunxi       -               sunxi               Mele_A1000G                          sun4i:MELE_A1000G,SPL,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),STATUSLED=234                                                               -
++Active  arm         armv7          sunxi       -               sunxi               Mele_A3700                           sun4i:MELE_A3700,SPL,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),STATUSLED=234                                                                -
++Active  arm         armv7          sunxi       -               sunxi               Merrii_Hummingbird_A20               sun7i:MERRII_HUMMINGBIRD_A20,SPL                                                                                                  -
++Active  arm         armv7          sunxi       -               sunxi               merrii_m2                            sun7i:MERRII_M2,SPL,SUNXI_EMAC                                                                                                    -
++Active  arm         armv7          sunxi       -               sunxi               Mini-X                               sun4i:MINI_X,SPL                                                                                                                  -
++Active  arm         armv7          sunxi       -               sunxi               Mini-X-1Gb                           sun4i:MINI_X_1GB,SPL                                                                                                              -
++Active  arm         armv7          sunxi       -               sunxi               Mini-X_A10s                          sun5i:MINI_X_A10S,SPL                                                                                                             -
++Active  arm         armv7          sunxi       -               sunxi               mk802                                sun4i:MK802,SPL,NO_AXP                                                                                                            -
++Active  arm         armv7          sunxi       -               sunxi               mk802-1gb                            sun4i:MK802_1GB,SPL,NO_AXP                                                                                                        -
++Active  arm         armv7          sunxi       -               sunxi               mk802_a10s                           sun5i:MK802_A10S,SPL,AXP152_POWER,STATUSLED=34                                                                                    -
++Active  arm         armv7          sunxi       -               sunxi               mk802ii_A20                          sun7i:MK802II_A20,SPL                                                                                                             -
++Active  arm         armv7          sunxi       -               sunxi               mk802ii                              sun4i:MK802II,SPL                                                                                                                 -
++Active  arm         armv7          sunxi       -               sunxi               mk808c_A20                           sun7i:MK808C_A20,SPL                                                                                                              -
++Active  arm         armv7          sunxi       -               sunxi               OLIMEX-A13-SOM                       sun5i:OLIMEX_A13_SOM,SPL,NO_AXP,STATUSLED=201,CONS_INDEX=2                                                                        -
++Active  arm         armv7          sunxi       -               sunxi               pcDuino                              sun4i:PCDUINO,SPL,SUNXI_EMAC                                                                                                      -
++Active  arm         armv7          sunxi       -               sunxi               pengpod1000                          sun4i:PENGPOD1000,SPL                                                                                                             -
++Active  arm         armv7          sunxi       -               sunxi               pengpod700                           sun4i:PENGPOD700,SPL                                                                                                              -
++Active        arm         armv7          suxni       -               sunxi               pineriver-h25                        sun5i:PINERIVER-H25,SPL
++Active  arm         armv7          sunxi       -               sunxi               POV_TAB_P703                         sun5i:POV_TAB_P703,SPL                                                                                                            -
++Active  arm         armv7          sunxi       -               sunxi               PoV_ProTab2_IPS9                     sun4i:POV_PROTAB2,SPL                                                                                                             -
++Active  arm         armv7          sunxi       -               sunxi               PoV_ProTab2_IPS_3g                   sun4i:POV_PROTAB2,SPL                                                                                                             -
++Active  arm         armv7          sunxi       -               sunxi               PoV_ProTab2_XXL                      sun4i:POV_PROTAB2_XXL,SPL                                                                                                         -
++Active  arm         armv7          sunxi       -               sunxi               qt840a                               sun7i:QT840A,SPL,FAST_MBUS,STATUSLED=244                                                                                          -
++Active  arm         armv7          sunxi       -               sunxi               r7-tv-dongle                         sun5i:R7DONGLE,SPL,AXP152_POWER,STATUSLED=34                                                                                      -
++Active  arm         armv7          sunxi       -               sunxi               Sanei_N90                            sun4i:SANEI_N90,SPL                                                                                                               -
++Active  arm         armv7          sunxi       -               sunxi               Semitime_G2                          sun5i:SEMITIME_G2,SPL,AXP152_POWER,STATUSLED=34                                                                                   -
++Active  arm         armv7          sunxi       -               sunxi               sun4i                                sun4i:SUNXI_EMAC                                                                                                                  -
++Active  arm         armv7          sunxi       -               sunxi               sun4i_sdcon                          sun4i:UART0_PORT_F,SUNXI_EMAC                                                                                                     -
++Active  arm         armv7          sunxi       -               sunxi               sun5i                                sun5i:SUNXI_EMAC                                                                                                                  -
++Active  arm         armv7          sunxi       -               sunxi               sun5i_sdcon                          sun5i:UART0_PORT_F,SUNXI_EMAC                                                                                                     -
++Active  arm         armv7          sunxi       -               sunxi               sun5i_uart1                          sun5i:CONS_INDEX=2,SUNXI_EMAC                                                                                                     -
++Active  arm         armv7          sunxi       -               sunxi               TZX-Q8-713B6                         sun5i:TZX_Q8_713B6,SPL,CONS_INDEX=2                                                                                               -
++Active  arm         armv7          sunxi       -               sunxi               TZX-Q8-713B7                         sun5i:TZX_Q8_713B7,SPL,CONS_INDEX=2                                                                                               -
++Active  arm         armv7          sunxi       -               sunxi               uhost_u1a                            sun4i:UHOST_U1A,SPL,STATUSLED=34                                                                                                  -
++Active  arm         armv7          sunxi       -               sunxi               Wexler_TAB_7200                      sun7i:WEXLER_TAB_7200,SPL                                                                                                         -
++Active  arm         armv7          sunxi       -               sunxi               wobo-i5                              sun5i:WOBO_I5,SPL,STATUSLED=34                                                                                                    -
++Active  arm         armv7          sunxi       -               sunxi               xzpad700                             sun5i:XZPAD700,SPL                                                                                                                -
++Active  arm         armv7          sunxi       -               sunxi               zatab                                sun4i:ZATAB,SPL                                                                                                                   -
+ Active  arm         armv7          u8500       st-ericsson     snowball            snowball                             -                                                                                                                                 Mathieu Poirier <mathieu.poirier@linaro.org>
+ Active  arm         armv7          u8500       st-ericsson     u8500               u8500_href                           -                                                                                                                                 -
+ Active  arm         armv7          vf610       freescale       vf610twr            vf610twr                             vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg                                                                         Alison Wang <b18965@freescale.com>
+diff -ruN u-boot-2014.04/common/spl/spl_mmc.c u-boot-sunxi/common/spl/spl_mmc.c
+--- u-boot-2014.04/common/spl/spl_mmc.c        2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/common/spl/spl_mmc.c  2014-09-06 16:58:36.205953114 +0200
+@@ -29,8 +29,10 @@
+       if (err == 0)
+               goto end;
+ 
+-      if (image_get_magic(header) != IH_MAGIC)
++      if (image_get_magic(header) != IH_MAGIC) {
++              printf("spl: not an uImage at %lu\n", sector);
+               return -1;
++      }
+ 
+       spl_parse_image_header(header);
+ 
+diff -ruN u-boot-2014.04/drivers/gpio/Makefile u-boot-sunxi/drivers/gpio/Makefile
+--- u-boot-2014.04/drivers/gpio/Makefile       2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/drivers/gpio/Makefile 2014-09-06 16:58:36.253953113 +0200
+@@ -34,3 +34,4 @@
+ obj-$(CONFIG_ADI_GPIO2)       += adi_gpio2.o
+ obj-$(CONFIG_TCA642X)         += tca642x.o
+ oby-$(CONFIG_SX151X)          += sx151x.o
++obj-$(CONFIG_SUNXI_GPIO)      += sunxi_gpio.o
+diff -ruN u-boot-2014.04/drivers/gpio/sunxi_gpio.c u-boot-sunxi/drivers/gpio/sunxi_gpio.c
+--- u-boot-2014.04/drivers/gpio/sunxi_gpio.c   1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/drivers/gpio/sunxi_gpio.c     2014-09-06 16:58:36.253953113 +0200
+@@ -0,0 +1,102 @@
++/*
++ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
++ *
++ * Based on earlier arch/arm/cpu/armv7/sunxi/gpio.c:
++ *
++ * (C) Copyright 2007-2011
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/gpio.h>
++
++static int sunxi_gpio_output(u32 pin, u32 val)
++{
++      u32 dat;
++      u32 bank = GPIO_BANK(pin);
++      u32 num = GPIO_NUM(pin);
++      struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
++
++      dat = readl(&pio->dat);
++      if (val)
++              dat |= 0x1 << num;
++      else
++              dat &= ~(0x1 << num);
++
++      writel(dat, &pio->dat);
++
++      return 0;
++}
++
++static int sunxi_gpio_input(u32 pin)
++{
++      u32 dat;
++      u32 bank = GPIO_BANK(pin);
++      u32 num = GPIO_NUM(pin);
++      struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
++
++      dat = readl(&pio->dat);
++      dat >>= num;
++
++      return dat & 0x1;
++}
++
++int gpio_request(unsigned gpio, const char *label)
++{
++      return 0;
++}
++
++int gpio_free(unsigned gpio)
++{
++      return 0;
++}
++
++int gpio_direction_input(unsigned gpio)
++{
++      sunxi_gpio_set_cfgpin(gpio, SUNXI_GPIO_INPUT);
++
++      return sunxi_gpio_input(gpio);
++}
++
++int gpio_direction_output(unsigned gpio, int value)
++{
++      sunxi_gpio_set_cfgpin(gpio, SUNXI_GPIO_OUTPUT);
++
++      return sunxi_gpio_output(gpio, value);
++}
++
++int gpio_get_value(unsigned gpio)
++{
++      return sunxi_gpio_input(gpio);
++}
++
++int gpio_set_value(unsigned gpio, int value)
++{
++      return sunxi_gpio_output(gpio, value);
++}
++
++int sunxi_name_to_gpio(const char *name)
++{
++      int group = 0;
++      int groupsize = 9 * 32;
++      long pin;
++      char *eptr;
++      if (*name == 'P' || *name == 'p')
++              name++;
++      if (*name >= 'A') {
++              group = *name - (*name > 'a' ? 'a' : 'A');
++              groupsize = 32;
++              name++;
++      }
++
++      pin = simple_strtol(name, &eptr, 10);
++      if (!*name || *eptr)
++              return -1;
++      if (pin < 0 || pin > groupsize || group >= 9)
++              return -1;
++      return group * 32 + pin;
++}
+diff -ruN u-boot-2014.04/drivers/i2c/Makefile u-boot-sunxi/drivers/i2c/Makefile
+--- u-boot-2014.04/drivers/i2c/Makefile        2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/drivers/i2c/Makefile  2014-09-06 16:58:36.265953112 +0200
+@@ -27,5 +27,6 @@
+ obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o
+ obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o
+ obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
++obj-$(CONFIG_SYS_I2C_SUNXI) += mvtwsi.o
+ obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
+ obj-$(CONFIG_SYS_I2C_ZYNQ) += zynq_i2c.o
+diff -ruN u-boot-2014.04/drivers/i2c/mvtwsi.c u-boot-sunxi/drivers/i2c/mvtwsi.c
+--- u-boot-2014.04/drivers/i2c/mvtwsi.c        2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/drivers/i2c/mvtwsi.c  2014-09-06 16:58:36.265953112 +0200
+@@ -22,6 +22,8 @@
+ #include <asm/arch/orion5x.h>
+ #elif defined(CONFIG_KIRKWOOD)
+ #include <asm/arch/kirkwood.h>
++#elif defined(CONFIG_SUNXI)
++#include <asm/arch/i2c.h>
+ #else
+ #error Driver mvtwsi not supported by SoC or board
+ #endif
+@@ -30,6 +32,20 @@
+  * TWSI register structure
+  */
+ 
++#ifdef CONFIG_SUNXI
++
++struct  mvtwsi_registers {
++      u32 slave_address;
++      u32 xtnd_slave_addr;
++      u32 data;
++      u32 control;
++      u32 status;
++      u32 baudrate;
++      u32 soft_reset;
++};
++
++#else
++
+ struct  mvtwsi_registers {
+       u32 slave_address;
+       u32 data;
+@@ -43,6 +59,8 @@
+       u32 soft_reset;
+ };
+ 
++#endif
++
+ /*
+  * Control register fields
+  */
+@@ -216,21 +234,7 @@
+  */
+ 
+ #define TWSI_FREQUENCY(m, n) \
+-      ((u8) (CONFIG_SYS_TCLK / (10 * (m + 1) * 2 * (1 << n))))
+-
+-/*
+- * These are required to be reprogrammed before enabling the controller
+- * because a reset loses them.
+- * Default values come from the spec, but a twsi_reset will change them.
+- * twsi_slave_address left uninitialized lest checkpatch.pl complains.
+- */
+-
+-/* Baudrate generator: m (bits 7..4) =4, n (bits 3..0) =4 */
+-static u8 twsi_baud_rate = 0x44; /* baudrate at controller reset */
+-/* Default frequency corresponding to default m=4, n=4 */
+-static u8 twsi_actual_speed = TWSI_FREQUENCY(4, 4);
+-/* Default slave address is 0 (so is an uninitialized static) */
+-static u8 twsi_slave_address;
++      (CONFIG_SYS_TCLK / (10 * (m + 1) * (1 << n)))
+ 
+ /*
+  * Reset controller.
+@@ -238,7 +242,7 @@
+  * Controller reset also resets the baud rate and slave address, so
+  * re-establish them.
+  */
+-static void twsi_reset(void)
++static void twsi_reset(u8 baud_rate, u8 slave_address)
+ {
+       /* ensure controller will be enabled by any twsi*() function */
+       twsi_control_flags = MVTWSI_CONTROL_TWSIEN;
+@@ -247,9 +251,9 @@
+       /* wait 2 ms -- this is what the Marvell LSP does */
+       udelay(20000);
+       /* set baud rate */
+-      writel(twsi_baud_rate, &twsi->baudrate);
++      writel(baud_rate, &twsi->baudrate);
+       /* set slave address even though we don't use it */
+-      writel(twsi_slave_address, &twsi->slave_address);
++      writel(slave_address, &twsi->slave_address);
+       writel(0, &twsi->xtnd_slave_addr);
+       /* assert STOP but don't care for the result */
+       (void) twsi_stop(0);
+@@ -277,12 +281,8 @@
+                       }
+               }
+       }
+-      /* save baud rate and slave for later calls to twsi_reset */
+-      twsi_baud_rate = baud;
+-      twsi_actual_speed = highest_speed;
+-      twsi_slave_address = slaveadd;
+       /* reset controller */
+-      twsi_reset();
++      twsi_reset(baud, slaveadd);
+ }
+ 
+ /*
+diff -ruN u-boot-2014.04/drivers/mmc/Makefile u-boot-sunxi/drivers/mmc/Makefile
+--- u-boot-2014.04/drivers/mmc/Makefile        2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/drivers/mmc/Makefile  2014-09-06 16:58:36.281953112 +0200
+@@ -28,6 +28,7 @@
+ obj-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
+ obj-$(CONFIG_DWMMC) += dw_mmc.o
+ obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
++obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o
+ obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o
+ obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o
+ ifdef CONFIG_SPL_BUILD
+diff -ruN u-boot-2014.04/drivers/mmc/sunxi_mmc.c u-boot-sunxi/drivers/mmc/sunxi_mmc.c
+--- u-boot-2014.04/drivers/mmc/sunxi_mmc.c     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/drivers/mmc/sunxi_mmc.c       2014-09-06 16:58:36.281953112 +0200
+@@ -0,0 +1,385 @@
++/*
++ * (C) Copyright 2007-2011
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Aaron <leafy.myeh@allwinnertech.com>
++ *
++ * MMC driver for allwinner sunxi platform.
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#include <malloc.h>
++#include <mmc.h>
++#include <asm/io.h>
++#include <asm/arch/clock.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/mmc.h>
++
++struct sunxi_mmc_host {
++      unsigned mmc_no;
++      uint32_t *mclkreg;
++      unsigned database;
++      unsigned fatal_err;
++      unsigned mod_clk;
++      struct sunxi_mmc *reg;
++      struct mmc_config cfg;
++};
++
++/* support 4 mmc hosts */
++struct sunxi_mmc_host mmc_host[4];
++
++static int mmc_resource_init(int sdc_no)
++{
++      struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no];
++      struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
++
++      debug("init mmc %d resource\n", sdc_no);
++
++      switch (sdc_no) {
++      case 0:
++              mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC0_BASE;
++              mmchost->mclkreg = &ccm->sd0_clk_cfg;
++              break;
++      case 1:
++              mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC1_BASE;
++              mmchost->mclkreg = &ccm->sd1_clk_cfg;
++              break;
++      case 2:
++              mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE;
++              mmchost->mclkreg = &ccm->sd2_clk_cfg;
++              break;
++      case 3:
++              mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE;
++              mmchost->mclkreg = &ccm->sd3_clk_cfg;
++              break;
++      default:
++              printf("Wrong mmc number %d\n", sdc_no);
++              return -1;
++      }
++#ifdef CONFIG_SUN6I
++      mmchost->database = (unsigned int)mmchost->reg + 0x200;
++#else
++      mmchost->database = (unsigned int)mmchost->reg + 0x100;
++#endif
++      mmchost->mmc_no = sdc_no;
++
++      return 0;
++}
++
++static int mmc_clk_io_on(int sdc_no)
++{
++      unsigned int pll_clk;
++      unsigned int divider;
++      struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no];
++      struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
++
++      debug("init mmc %d clock and io\n", sdc_no);
++
++      /* config ahb clock */
++      setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no));
++
++#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I)
++      /* unassert reset */
++      setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MMC(sdc_no));
++#endif
++
++      /* config mod clock */
++      pll_clk = clock_get_pll6();
++      /* should be close to 100 MHz but no more, so round up */
++      divider = ((pll_clk + 99999999) / 100000000) - 1;
++      writel(CCM_MMC_CTRL_ENABLE | CCM_MMC_CTRL_PLL6 | divider,
++             mmchost->mclkreg);
++      mmchost->mod_clk = pll_clk / (divider + 1);
++
++      return 0;
++}
++
++static int mmc_update_clk(struct mmc *mmc)
++{
++      struct sunxi_mmc_host *mmchost = mmc->priv;
++      unsigned int cmd;
++      unsigned timeout_msecs = 2000;
++
++      cmd = SUNXI_MMC_CMD_START |
++            SUNXI_MMC_CMD_UPCLK_ONLY |
++            SUNXI_MMC_CMD_WAIT_PRE_OVER;
++      writel(cmd, &mmchost->reg->cmd);
++      while (readl(&mmchost->reg->cmd) & SUNXI_MMC_CMD_START) {
++              if (!timeout_msecs--)
++                      return -1;
++              udelay(1000);
++      }
++
++      /* clock update sets various irq status bits, clear these */
++      writel(readl(&mmchost->reg->rint), &mmchost->reg->rint);
++
++      return 0;
++}
++
++static int mmc_config_clock(struct mmc *mmc, unsigned div)
++{
++      struct sunxi_mmc_host *mmchost = mmc->priv;
++      unsigned rval = readl(&mmchost->reg->clkcr);
++
++      /* Disable Clock */
++      rval &= ~SUNXI_MMC_CLK_ENABLE;
++      writel(rval, &mmchost->reg->clkcr);
++      if (mmc_update_clk(mmc))
++              return -1;
++
++      /* Change Divider Factor */
++      rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK;
++      rval |= div;
++      writel(rval, &mmchost->reg->clkcr);
++      if (mmc_update_clk(mmc))
++              return -1;
++      /* Re-enable Clock */
++      rval |= SUNXI_MMC_CLK_ENABLE;
++      writel(rval, &mmchost->reg->clkcr);
++
++      if (mmc_update_clk(mmc))
++              return -1;
++
++      return 0;
++}
++
++static void mmc_set_ios(struct mmc *mmc)
++{
++      struct sunxi_mmc_host *mmchost = mmc->priv;
++      unsigned int clkdiv = 0;
++
++      debug("set ios: bus_width: %x, clock: %d, mod_clk: %d\n",
++            mmc->bus_width, mmc->clock, mmchost->mod_clk);
++
++      /* Change clock first */
++      clkdiv = (mmchost->mod_clk + (mmc->clock >> 1)) / mmc->clock / 2;
++      if (mmc->clock) {
++              if (mmc_config_clock(mmc, clkdiv)) {
++                      mmchost->fatal_err = 1;
++                      return;
++              }
++      }
++
++      /* Change bus width */
++      if (mmc->bus_width == 8)
++              writel(0x2, &mmchost->reg->width);
++      else if (mmc->bus_width == 4)
++              writel(0x1, &mmchost->reg->width);
++      else
++              writel(0x0, &mmchost->reg->width);
++}
++
++static int mmc_core_init(struct mmc *mmc)
++{
++      struct sunxi_mmc_host *mmchost = mmc->priv;
++
++      /* Reset controller */
++      writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl);
++      udelay(1000);
++
++      return 0;
++}
++
++static int mmc_trans_data_by_cpu(struct mmc *mmc, struct mmc_data *data)
++{
++      struct sunxi_mmc_host *mmchost = mmc->priv;
++      const int reading = !!(data->flags & MMC_DATA_READ);
++      const uint32_t status_bit = reading ? SUNXI_MMC_STATUS_FIFO_EMPTY :
++                                            SUNXI_MMC_STATUS_FIFO_FULL;
++      unsigned i;
++      unsigned byte_cnt = data->blocksize * data->blocks;
++      unsigned timeout_msecs = 2000;
++      unsigned *buff = (unsigned int *)(reading ? data->dest : data->src);
++
++      /* Always read / write data through the CPU */
++      setbits_le32(&mmchost->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB);
++
++      for (i = 0; i < (byte_cnt >> 2); i++) {
++              while (readl(&mmchost->reg->status) & status_bit) {
++                      if (!timeout_msecs--)
++                              return -1;
++                      udelay(1000);
++              }
++
++              if (reading)
++                      buff[i] = readl(mmchost->database);
++              else
++                      writel(buff[i], mmchost->database);
++      }
++
++      return 0;
++}
++
++static int mmc_rint_wait(struct mmc *mmc, unsigned int timeout_msecs,
++                       unsigned int done_bit, const char *what)
++{
++      struct sunxi_mmc_host *mmchost = mmc->priv;
++      unsigned int status;
++
++      do {
++              status = readl(&mmchost->reg->rint);
++              if (!timeout_msecs-- ||
++                  (status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT)) {
++                      debug("%s timeout %x\n", what,
++                            status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT);
++                      return TIMEOUT;
++              }
++              udelay(1000);
++      } while (!(status & done_bit));
++
++      return 0;
++}
++
++static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
++                      struct mmc_data *data)
++{
++      struct sunxi_mmc_host *mmchost = mmc->priv;
++      unsigned int cmdval = SUNXI_MMC_CMD_START;
++      unsigned int timeout_msecs;
++      int error = 0;
++      unsigned int status = 0;
++      unsigned int bytecnt = 0;
++
++      if (mmchost->fatal_err)
++              return -1;
++      if (cmd->resp_type & MMC_RSP_BUSY)
++              debug("mmc cmd %d check rsp busy\n", cmd->cmdidx);
++      if (cmd->cmdidx == 12)
++              return 0;
++
++      if (!cmd->cmdidx)
++              cmdval |= SUNXI_MMC_CMD_SEND_INIT_SEQ;
++      if (cmd->resp_type & MMC_RSP_PRESENT)
++              cmdval |= SUNXI_MMC_CMD_RESP_EXPIRE;
++      if (cmd->resp_type & MMC_RSP_136)
++              cmdval |= SUNXI_MMC_CMD_LONG_RESPONSE;
++      if (cmd->resp_type & MMC_RSP_CRC)
++              cmdval |= SUNXI_MMC_CMD_CHK_RESPONSE_CRC;
++
++      if (data) {
++              if ((u32) data->dest & 0x3) {
++                      error = -1;
++                      goto out;
++              }
++
++              cmdval |= SUNXI_MMC_CMD_DATA_EXPIRE|SUNXI_MMC_CMD_WAIT_PRE_OVER;
++              if (data->flags & MMC_DATA_WRITE)
++                      cmdval |= SUNXI_MMC_CMD_WRITE;
++              if (data->blocks > 1)
++                      cmdval |= SUNXI_MMC_CMD_AUTO_STOP;
++              writel(data->blocksize, &mmchost->reg->blksz);
++              writel(data->blocks * data->blocksize, &mmchost->reg->bytecnt);
++      }
++
++      debug("mmc %d, cmd %d(0x%08x), arg 0x%08x\n", mmchost->mmc_no,
++            cmd->cmdidx, cmdval | cmd->cmdidx, cmd->cmdarg);
++      writel(cmd->cmdarg, &mmchost->reg->arg);
++
++      if (!data)
++              writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd);
++
++      /*
++       * transfer data and check status
++       * STATREG[2] : FIFO empty
++       * STATREG[3] : FIFO full
++       */
++      if (data) {
++              int ret = 0;
++
++              bytecnt = data->blocksize * data->blocks;
++              debug("trans data %d bytes\n", bytecnt);
++              writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd);
++              ret = mmc_trans_data_by_cpu(mmc, data);
++              if (ret) {
++                      error = readl(&mmchost->reg->rint) & \
++                              SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT;
++                      error = TIMEOUT;
++                      goto out;
++              }
++      }
++
++      error = mmc_rint_wait(mmc, 0xfffff, SUNXI_MMC_RINT_COMMAND_DONE, "cmd");
++      if (error)
++              goto out;
++
++      if (data) {
++              timeout_msecs = 120;
++              debug("cacl timeout %x msec\n", timeout_msecs);
++              error = mmc_rint_wait(mmc, timeout_msecs,
++                                    data->blocks > 1 ?
++                                    SUNXI_MMC_RINT_AUTO_COMMAND_DONE :
++                                    SUNXI_MMC_RINT_DATA_OVER,
++                                    "data");
++              if (error)
++                      goto out;
++      }
++
++      if (cmd->resp_type & MMC_RSP_BUSY) {
++              timeout_msecs = 2000;
++              do {
++                      status = readl(&mmchost->reg->status);
++                      if (!timeout_msecs--) {
++                              debug("busy timeout\n");
++                              error = TIMEOUT;
++                              goto out;
++                      }
++                      udelay(1000);
++              } while (status & SUNXI_MMC_STATUS_CARD_DATA_BUSY);
++      }
++
++      if (cmd->resp_type & MMC_RSP_136) {
++              cmd->response[0] = readl(&mmchost->reg->resp3);
++              cmd->response[1] = readl(&mmchost->reg->resp2);
++              cmd->response[2] = readl(&mmchost->reg->resp1);
++              cmd->response[3] = readl(&mmchost->reg->resp0);
++              debug("mmc resp 0x%08x 0x%08x 0x%08x 0x%08x\n",
++                    cmd->response[3], cmd->response[2],
++                    cmd->response[1], cmd->response[0]);
++      } else {
++              cmd->response[0] = readl(&mmchost->reg->resp0);
++              debug("mmc resp 0x%08x\n", cmd->response[0]);
++      }
++out:
++      if (error < 0) {
++              writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl);
++              mmc_update_clk(mmc);
++      }
++      writel(0xffffffff, &mmchost->reg->rint);
++      writel(readl(&mmchost->reg->gctrl) | SUNXI_MMC_GCTRL_FIFO_RESET,
++             &mmchost->reg->gctrl);
++
++      return error;
++}
++
++static const struct mmc_ops sunxi_mmc_ops = {
++      .send_cmd       = mmc_send_cmd,
++      .set_ios        = mmc_set_ios,
++      .init           = mmc_core_init,
++};
++
++int sunxi_mmc_init(int sdc_no)
++{
++      struct mmc_config *cfg = &mmc_host[sdc_no].cfg;
++
++      memset(&mmc_host[sdc_no], 0, sizeof(struct sunxi_mmc_host));
++
++      cfg->name = "SUNXI SD/MMC";
++      cfg->ops  = &sunxi_mmc_ops;
++
++      cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
++      cfg->host_caps = MMC_MODE_4BIT;
++      cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
++      cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
++
++      cfg->f_min = 400000;
++      cfg->f_max = 52000000;
++
++      mmc_resource_init(sdc_no);
++      mmc_clk_io_on(sdc_no);
++
++      if (mmc_create(cfg, &mmc_host[sdc_no]) == NULL)
++              return -1;
++
++      return 0;
++}
+diff -ruN u-boot-2014.04/drivers/net/designware.c u-boot-sunxi/drivers/net/designware.c
+--- u-boot-2014.04/drivers/net/designware.c    2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/drivers/net/designware.c      2014-09-06 16:58:36.301953111 +0200
+@@ -249,7 +249,7 @@
+       rx_descs_init(dev);
+       tx_descs_init(dev);
+ 
+-      writel(FIXEDBURST | PRIORXTX_41 | BURST_16, &dma_p->busmode);
++      writel(FIXEDBURST | PRIORXTX_41 | DMA_PBL, &dma_p->busmode);
+ 
+       writel(readl(&dma_p->opmode) | FLUSHTXFIFO | STOREFORWARD,
+              &dma_p->opmode);
+@@ -280,10 +280,18 @@
+       u32 desc_num = priv->tx_currdescnum;
+       struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num];
+ 
+-      /* Invalidate only "status" field for the following check */
+-      invalidate_dcache_range((unsigned long)&desc_p->txrx_status,
+-                              (unsigned long)&desc_p->txrx_status +
+-                              sizeof(desc_p->txrx_status));
++      /*
++       * Strictly we only need to invalidate the "txrx_status" field
++       * for the following check, but on some platforms we cannot
++       * invalidate only 4 bytes, so roundup to
++       * ARCH_DMA_MINALIGN. This is safe because the individual
++       * descriptors in the array are each aligned to
++       * ARCH_DMA_MINALIGN.
++       */
++      invalidate_dcache_range(
++              (unsigned long)desc_p,
++              (unsigned long)desc_p +
++              roundup(sizeof(desc_p->txrx_status), ARCH_DMA_MINALIGN));
+ 
+       /* Check if the descriptor is owned by CPU */
+       if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) {
+@@ -351,7 +359,7 @@
+               /* Invalidate received data */
+               invalidate_dcache_range((unsigned long)desc_p->dmamac_addr,
+                                       (unsigned long)desc_p->dmamac_addr +
+-                                      length);
++                                      roundup(length, ARCH_DMA_MINALIGN));
+ 
+               NetReceive(desc_p->dmamac_addr, length);
+ 
+@@ -390,6 +398,8 @@
+       if (!phydev)
+               return -1;
+ 
++      phy_connect_dev(phydev, dev);
++
+       phydev->supported &= PHY_GBIT_FEATURES;
+       phydev->advertising = phydev->supported;
+ 
+@@ -412,7 +422,8 @@
+        * Since the priv structure contains the descriptors which need a strict
+        * buswidth alignment, memalign is used to allocate memory
+        */
+-      priv = (struct dw_eth_dev *) memalign(16, sizeof(struct dw_eth_dev));
++      priv = (struct dw_eth_dev *) memalign(ARCH_DMA_MINALIGN,
++                                            sizeof(struct dw_eth_dev));
+       if (!priv) {
+               free(dev);
+               return -ENOMEM;
+diff -ruN u-boot-2014.04/drivers/net/designware.h u-boot-sunxi/drivers/net/designware.h
+--- u-boot-2014.04/drivers/net/designware.h    2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/drivers/net/designware.h      2014-09-06 16:58:36.301953111 +0200
+@@ -77,18 +77,18 @@
+ 
+ #define DW_DMA_BASE_OFFSET    (0x1000)
+ 
++/* Default DMA Burst length */
++#ifndef CONFIG_DW_GMAC_DEFAULT_DMA_PBL
++#define CONFIG_DW_GMAC_DEFAULT_DMA_PBL 8
++#endif
++
+ /* Bus mode register definitions */
+ #define FIXEDBURST            (1 << 16)
+ #define PRIORXTX_41           (3 << 14)
+ #define PRIORXTX_31           (2 << 14)
+ #define PRIORXTX_21           (1 << 14)
+ #define PRIORXTX_11           (0 << 14)
+-#define BURST_1                       (1 << 8)
+-#define BURST_2                       (2 << 8)
+-#define BURST_4                       (4 << 8)
+-#define BURST_8                       (8 << 8)
+-#define BURST_16              (16 << 8)
+-#define BURST_32              (32 << 8)
++#define DMA_PBL                       (CONFIG_DW_GMAC_DEFAULT_DMA_PBL<<8)
+ #define RXHIGHPRIO            (1 << 1)
+ #define DMAMAC_SRST           (1 << 0)
+ 
+@@ -215,15 +215,14 @@
+ #endif
+ 
+ struct dw_eth_dev {
+-      u32 interface;
+-      u32 tx_currdescnum;
+-      u32 rx_currdescnum;
+-
+       struct dmamacdescr tx_mac_descrtable[CONFIG_TX_DESCR_NUM];
+       struct dmamacdescr rx_mac_descrtable[CONFIG_RX_DESCR_NUM];
++      char txbuffs[TX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN);
++      char rxbuffs[RX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN);
+ 
+-      char txbuffs[TX_TOTAL_BUFSIZE];
+-      char rxbuffs[RX_TOTAL_BUFSIZE];
++      u32 interface;
++      u32 tx_currdescnum;
++      u32 rx_currdescnum;
+ 
+       struct eth_mac_regs *mac_regs_p;
+       struct eth_dma_regs *dma_regs_p;
+diff -ruN u-boot-2014.04/drivers/net/Makefile u-boot-sunxi/drivers/net/Makefile
+--- u-boot-2014.04/drivers/net/Makefile        2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/drivers/net/Makefile  2014-09-06 16:58:36.297953112 +0200
+@@ -50,7 +50,7 @@
+ obj-$(CONFIG_SH_ETHER) += sh_eth.o
+ obj-$(CONFIG_SMC91111) += smc91111.o
+ obj-$(CONFIG_SMC911X) += smc911x.o
+-obj-$(CONFIG_SUNXI_WEMAC) += sunxi_wemac.o
++obj-$(CONFIG_SUNXI_EMAC) += sunxi_emac.o
+ obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
+ obj-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o
+ obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o
+diff -ruN u-boot-2014.04/drivers/net/sunxi_emac.c u-boot-sunxi/drivers/net/sunxi_emac.c
+--- u-boot-2014.04/drivers/net/sunxi_emac.c    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/drivers/net/sunxi_emac.c      2014-09-06 16:58:36.317953111 +0200
+@@ -0,0 +1,521 @@
++/*
++ * sunxi_emac.c -- Allwinner A10 ethernet driver
++ *
++ * (C) Copyright 2012, Stefan Roese <sr@denx.de>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#include <linux/err.h>
++#include <malloc.h>
++#include <miiphy.h>
++#include <net.h>
++#include <asm/io.h>
++#include <asm/arch/clock.h>
++#include <asm/arch/gpio.h>
++
++/* EMAC register  */
++struct emac_regs {
++      u32 ctl;        /* 0x00 */
++      u32 tx_mode;    /* 0x04 */
++      u32 tx_flow;    /* 0x08 */
++      u32 tx_ctl0;    /* 0x0c */
++      u32 tx_ctl1;    /* 0x10 */
++      u32 tx_ins;     /* 0x14 */
++      u32 tx_pl0;     /* 0x18 */
++      u32 tx_pl1;     /* 0x1c */
++      u32 tx_sta;     /* 0x20 */
++      u32 tx_io_data; /* 0x24 */
++      u32 tx_io_data1;/* 0x28 */
++      u32 tx_tsvl0;   /* 0x2c */
++      u32 tx_tsvh0;   /* 0x30 */
++      u32 tx_tsvl1;   /* 0x34 */
++      u32 tx_tsvh1;   /* 0x38 */
++      u32 rx_ctl;     /* 0x3c */
++      u32 rx_hash0;   /* 0x40 */
++      u32 rx_hash1;   /* 0x44 */
++      u32 rx_sta;     /* 0x48 */
++      u32 rx_io_data; /* 0x4c */
++      u32 rx_fbc;     /* 0x50 */
++      u32 int_ctl;    /* 0x54 */
++      u32 int_sta;    /* 0x58 */
++      u32 mac_ctl0;   /* 0x5c */
++      u32 mac_ctl1;   /* 0x60 */
++      u32 mac_ipgt;   /* 0x64 */
++      u32 mac_ipgr;   /* 0x68 */
++      u32 mac_clrt;   /* 0x6c */
++      u32 mac_maxf;   /* 0x70 */
++      u32 mac_supp;   /* 0x74 */
++      u32 mac_test;   /* 0x78 */
++      u32 mac_mcfg;   /* 0x7c */
++      u32 mac_mcmd;   /* 0x80 */
++      u32 mac_madr;   /* 0x84 */
++      u32 mac_mwtd;   /* 0x88 */
++      u32 mac_mrdd;   /* 0x8c */
++      u32 mac_mind;   /* 0x90 */
++      u32 mac_ssrr;   /* 0x94 */
++      u32 mac_a0;     /* 0x98 */
++      u32 mac_a1;     /* 0x9c */
++};
++
++/* SRAMC register  */
++struct sunxi_sramc_regs {
++      u32 ctrl0;
++      u32 ctrl1;
++};
++
++/* 0: Disable       1: Aborted frame enable(default) */
++#define EMAC_TX_AB_M          (0x1 << 0)
++/* 0: CPU           1: DMA(default) */
++#define EMAC_TX_TM            (0x1 << 1)
++
++#define EMAC_TX_SETUP         (0)
++
++/* 0: DRQ asserted  1: DRQ automatically(default) */
++#define EMAC_RX_DRQ_MODE      (0x1 << 1)
++/* 0: CPU           1: DMA(default) */
++#define EMAC_RX_TM            (0x1 << 2)
++/* 0: Normal(default)        1: Pass all Frames */
++#define EMAC_RX_PA            (0x1 << 4)
++/* 0: Normal(default)        1: Pass Control Frames */
++#define EMAC_RX_PCF           (0x1 << 5)
++/* 0: Normal(default)        1: Pass Frames with CRC Error */
++#define EMAC_RX_PCRCE         (0x1 << 6)
++/* 0: Normal(default)        1: Pass Frames with Length Error */
++#define EMAC_RX_PLE           (0x1 << 7)
++/* 0: Normal                 1: Pass Frames length out of range(default) */
++#define EMAC_RX_POR           (0x1 << 8)
++/* 0: Not accept             1: Accept unicast Packets(default) */
++#define EMAC_RX_UCAD          (0x1 << 16)
++/* 0: Normal(default)        1: DA Filtering */
++#define EMAC_RX_DAF           (0x1 << 17)
++/* 0: Not accept             1: Accept multicast Packets(default) */
++#define EMAC_RX_MCO           (0x1 << 20)
++/* 0: Disable(default)       1: Enable Hash filter */
++#define EMAC_RX_MHF           (0x1 << 21)
++/* 0: Not accept             1: Accept Broadcast Packets(default) */
++#define EMAC_RX_BCO           (0x1 << 22)
++/* 0: Disable(default)       1: Enable SA Filtering */
++#define EMAC_RX_SAF           (0x1 << 24)
++/* 0: Normal(default)        1: Inverse Filtering */
++#define EMAC_RX_SAIF          (0x1 << 25)
++
++#define EMAC_RX_SETUP         (EMAC_RX_POR | EMAC_RX_UCAD | EMAC_RX_DAF | \
++                               EMAC_RX_MCO | EMAC_RX_BCO)
++
++/* 0: Disable                1: Enable Receive Flow Control(default) */
++#define EMAC_MAC_CTL0_RFC     (0x1 << 2)
++/* 0: Disable                1: Enable Transmit Flow Control(default) */
++#define EMAC_MAC_CTL0_TFC     (0x1 << 3)
++
++#define EMAC_MAC_CTL0_SETUP   (EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC)
++
++/* 0: Disable                1: Enable MAC Frame Length Checking(default) */
++#define EMAC_MAC_CTL1_FLC     (0x1 << 1)
++/* 0: Disable(default)       1: Enable Huge Frame */
++#define EMAC_MAC_CTL1_HF      (0x1 << 2)
++/* 0: Disable(default)       1: Enable MAC Delayed CRC */
++#define EMAC_MAC_CTL1_DCRC    (0x1 << 3)
++/* 0: Disable                1: Enable MAC CRC(default) */
++#define EMAC_MAC_CTL1_CRC     (0x1 << 4)
++/* 0: Disable                1: Enable MAC PAD Short frames(default) */
++#define EMAC_MAC_CTL1_PC      (0x1 << 5)
++/* 0: Disable(default)       1: Enable MAC PAD Short frames and append CRC */
++#define EMAC_MAC_CTL1_VC      (0x1 << 6)
++/* 0: Disable(default)       1: Enable MAC auto detect Short frames */
++#define EMAC_MAC_CTL1_ADP     (0x1 << 7)
++/* 0: Disable(default)       1: Enable */
++#define EMAC_MAC_CTL1_PRE     (0x1 << 8)
++/* 0: Disable(default)       1: Enable */
++#define EMAC_MAC_CTL1_LPE     (0x1 << 9)
++/* 0: Disable(default)       1: Enable no back off */
++#define EMAC_MAC_CTL1_NB      (0x1 << 12)
++/* 0: Disable(default)       1: Enable */
++#define EMAC_MAC_CTL1_BNB     (0x1 << 13)
++/* 0: Disable(default)       1: Enable */
++#define EMAC_MAC_CTL1_ED      (0x1 << 14)
++
++#define EMAC_MAC_CTL1_SETUP   (EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \
++                               EMAC_MAC_CTL1_PC)
++
++#define EMAC_MAC_IPGT         0x15
++
++#define EMAC_MAC_NBTB_IPG1    0xc
++#define EMAC_MAC_NBTB_IPG2    0x12
++
++#define EMAC_MAC_CW           0x37
++#define EMAC_MAC_RM           0xf
++
++#define EMAC_MAC_MFL          0x0600
++
++/* Receive status */
++#define EMAC_CRCERR           (0x1 << 4)
++#define EMAC_LENERR           (0x3 << 5)
++
++#define DMA_CPU_TRRESHOLD     2000
++
++struct emac_eth_dev {
++      u32 speed;
++      u32 duplex;
++      u32 phy_configured;
++      int link_printed;
++};
++
++struct emac_rxhdr {
++      s16 rx_len;
++      u16 rx_status;
++};
++
++static void emac_inblk_32bit(void *reg, void *data, int count)
++{
++      int cnt = (count + 3) >> 2;
++
++      if (cnt) {
++              u32 *buf = data;
++
++              do {
++                      u32 x = readl(reg);
++                      *buf++ = x;
++              } while (--cnt);
++      }
++}
++
++static void emac_outblk_32bit(void *reg, void *data, int count)
++{
++      int cnt = (count + 3) >> 2;
++
++      if (cnt) {
++              const u32 *buf = data;
++
++              do {
++                      writel(*buf++, reg);
++              } while (--cnt);
++      }
++}
++
++/* Read a word from phyxcer */
++static int emac_phy_read(const char *devname, unsigned char addr,
++                        unsigned char reg, unsigned short *value)
++{
++      struct eth_device *dev = eth_get_dev_by_name(devname);
++      struct emac_regs *regs = (struct emac_regs *)dev->iobase;
++
++      /* issue the phy address and reg */
++      writel(addr << 8 | reg, &regs->mac_madr);
++
++      /* pull up the phy io line */
++      writel(0x1, &regs->mac_mcmd);
++
++      /* Wait read complete */
++      mdelay(1);
++
++      /* push down the phy io line */
++      writel(0x0, &regs->mac_mcmd);
++
++      /* and write data */
++      *value = readl(&regs->mac_mrdd);
++
++      return 0;
++}
++
++/* Write a word to phyxcer */
++static int emac_phy_write(const char *devname, unsigned char addr,
++                         unsigned char reg, unsigned short value)
++{
++      struct eth_device *dev = eth_get_dev_by_name(devname);
++      struct emac_regs *regs = (struct emac_regs *)dev->iobase;
++
++      /* issue the phy address and reg */
++      writel(addr << 8 | reg, &regs->mac_madr);
++
++      /* pull up the phy io line */
++      writel(0x1, &regs->mac_mcmd);
++
++      /* Wait write complete */
++      mdelay(1);
++
++      /* push down the phy io line */
++      writel(0x0, &regs->mac_mcmd);
++
++      /* and write data */
++      writel(value, &regs->mac_mwtd);
++
++      return 0;
++}
++
++static void emac_setup(struct eth_device *dev)
++{
++      struct emac_regs *regs = (struct emac_regs *)dev->iobase;
++      u32 reg_val;
++      u16 phy_val;
++      u32 duplex_flag;
++
++      /* Set up TX */
++      writel(EMAC_TX_SETUP, &regs->tx_mode);
++
++      /* Set up RX */
++      writel(EMAC_RX_SETUP, &regs->rx_ctl);
++
++      /* Set MAC */
++      /* Set MAC CTL0 */
++      writel(EMAC_MAC_CTL0_SETUP, &regs->mac_ctl0);
++
++      /* Set MAC CTL1 */
++      emac_phy_read(dev->name, 1, 0, &phy_val);
++      debug("PHY SETUP, reg 0 value: %x\n", phy_val);
++      duplex_flag = !!(phy_val & (1 << 8));
++
++      reg_val = 0;
++      if (duplex_flag)
++              reg_val = (0x1 << 0);
++      writel(EMAC_MAC_CTL1_SETUP | reg_val, &regs->mac_ctl1);
++
++      /* Set up IPGT */
++      writel(EMAC_MAC_IPGT, &regs->mac_ipgt);
++
++      /* Set up IPGR */
++      writel(EMAC_MAC_NBTB_IPG2 | (EMAC_MAC_NBTB_IPG1 << 8), &regs->mac_ipgr);
++
++      /* Set up Collison window */
++      writel(EMAC_MAC_RM | (EMAC_MAC_CW << 8), &regs->mac_clrt);
++
++      /* Set up Max Frame Length */
++      writel(EMAC_MAC_MFL, &regs->mac_maxf);
++}
++
++static void emac_reset(struct eth_device *dev)
++{
++      struct emac_regs *regs = (struct emac_regs *)dev->iobase;
++
++      debug("resetting device\n");
++
++      /* RESET device */
++      writel(0, &regs->ctl);
++      udelay(200);
++
++      writel(1, &regs->ctl);
++      udelay(200);
++}
++
++static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd)
++{
++      struct emac_regs *regs = (struct emac_regs *)dev->iobase;
++      struct emac_eth_dev *priv = dev->priv;
++      u16 phy_reg;
++
++      /* Init EMAC */
++
++      /* Flush RX FIFO */
++      setbits_le32(&regs->rx_ctl, 0x8);
++      udelay(1);
++
++      /* Init MAC */
++
++      /* Soft reset MAC */
++      clrbits_le32(&regs->mac_ctl0, 0x1 << 15);
++
++      /* Clear RX counter */
++      writel(0x0, &regs->rx_fbc);
++      udelay(1);
++
++      /* Set up EMAC */
++      emac_setup(dev);
++
++      writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 |
++             dev->enetaddr[2], &regs->mac_a1);
++      writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 |
++             dev->enetaddr[5], &regs->mac_a0);
++
++      mdelay(1);
++
++      emac_reset(dev);
++
++      /* PHY POWER UP */
++      emac_phy_read(dev->name, 1, 0, &phy_reg);
++      emac_phy_write(dev->name, 1, 0, phy_reg & (~(0x1 << 11)));
++      mdelay(1);
++
++      emac_phy_read(dev->name, 1, 0, &phy_reg);
++
++      priv->speed = miiphy_speed(dev->name, 0);
++      priv->duplex = miiphy_duplex(dev->name, 0);
++
++      /* Print link status only once */
++      if (!priv->link_printed) {
++              printf("ENET Speed is %d Mbps - %s duplex connection\n",
++                     priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL");
++              priv->link_printed = 1;
++      }
++
++      /* Set EMAC SPEED depend on PHY */
++      clrsetbits_le32(&regs->mac_supp, 1 << 8,
++                      ((phy_reg & (0x1 << 13)) >> 13) << 8);
++
++      /* Set duplex depend on phy */
++      clrsetbits_le32(&regs->mac_ctl1, 1 << 0,
++                      ((phy_reg & (0x1 << 8)) >> 8) << 0);
++
++      /* Enable RX/TX */
++      setbits_le32(&regs->ctl, 0x7);
++
++      return 0;
++}
++
++static void sunxi_emac_eth_halt(struct eth_device *dev)
++{
++      /* Nothing to do here */
++}
++
++static int sunxi_emac_eth_recv(struct eth_device *dev)
++{
++      struct emac_regs *regs = (struct emac_regs *)dev->iobase;
++      struct emac_rxhdr rxhdr;
++      u32 rxcount;
++      u32 reg_val;
++      int rx_len;
++      int rx_status;
++      int good_packet;
++
++      /* Check packet ready or not */
++
++      /* Race warning: The first packet might arrive with
++       * the interrupts disabled, but the second will fix
++       */
++      rxcount = readl(&regs->rx_fbc);
++      if (!rxcount) {
++              /* Had one stuck? */
++              rxcount = readl(&regs->rx_fbc);
++              if (!rxcount)
++                      return 0;
++      }
++
++      reg_val = readl(&regs->rx_io_data);
++      if (reg_val != 0x0143414d) {
++              /* Disable RX */
++              clrbits_le32(&regs->ctl, 0x1 << 2);
++
++              /* Flush RX FIFO */
++              setbits_le32(&regs->rx_ctl, 0x1 << 3);
++              while (readl(&regs->rx_ctl) & (0x1 << 3))
++                      ;
++
++              /* Enable RX */
++              setbits_le32(&regs->ctl, 0x1 << 2);
++
++              return 0;
++      }
++
++      /* A packet ready now
++       * Get status/length
++       */
++      good_packet = 1;
++
++      emac_inblk_32bit(&regs->rx_io_data, &rxhdr, sizeof(rxhdr));
++
++      rx_len = rxhdr.rx_len;
++      rx_status = rxhdr.rx_status;
++
++      /* Packet Status check */
++      if (rx_len < 0x40) {
++              good_packet = 0;
++              debug("RX: Bad Packet (runt)\n");
++      }
++
++      /* rx_status is identical to RSR register. */
++      if (0 & rx_status & (EMAC_CRCERR | EMAC_LENERR)) {
++              good_packet = 0;
++              if (rx_status & EMAC_CRCERR)
++                      printf("crc error\n");
++              if (rx_status & EMAC_LENERR)
++                      printf("length error\n");
++      }
++
++      /* Move data from EMAC */
++      if (good_packet) {
++              if (rx_len > DMA_CPU_TRRESHOLD) {
++                      printf("Received packet is too big (len=%d)\n", rx_len);
++              } else {
++                      emac_inblk_32bit((void *)&regs->rx_io_data,
++                                       NetRxPackets[0], rx_len);
++
++                      /* Pass to upper layer */
++                      NetReceive(NetRxPackets[0], rx_len);
++                      return rx_len;
++              }
++      }
++
++      return 0;
++}
++
++static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int len)
++{
++      struct emac_regs *regs = (struct emac_regs *)dev->iobase;
++
++      /* Select channel 0 */
++      writel(0, &regs->tx_ins);
++
++      /* Write packet */
++      emac_outblk_32bit((void *)&regs->tx_io_data, packet, len);
++
++      /* Set TX len */
++      writel(len, &regs->tx_pl0);
++
++      /* Start translate from fifo to phy */
++      setbits_le32(&regs->tx_ctl0, 1);
++
++      return 0;
++}
++
++int sunxi_emac_initialize(void)
++{
++      struct sunxi_ccm_reg *const ccm =
++              (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
++      struct sunxi_sramc_regs *sram =
++              (struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE;
++      struct emac_regs *regs =
++              (struct emac_regs *)SUNXI_EMAC_BASE;
++      struct eth_device *dev;
++      struct emac_eth_dev *priv;
++      int pin;
++
++      dev = malloc(sizeof(*dev));
++      if (dev == NULL)
++              return -ENOMEM;
++
++      priv = (struct emac_eth_dev *)malloc(sizeof(struct emac_eth_dev));
++      if (!priv) {
++              free(dev);
++              return -ENOMEM;
++      }
++
++      memset(dev, 0, sizeof(*dev));
++      memset(priv, 0, sizeof(struct emac_eth_dev));
++
++      /* Map SRAM to EMAC */
++      setbits_le32(&sram->ctrl1, 0x5 << 2);
++
++      /* Configure pin mux settings for MII Ethernet */
++      for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++)
++              sunxi_gpio_set_cfgpin(pin, SUNXI_GPA0_EMAC);
++
++      /* Set up clock gating */
++      setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_EMAC);
++
++      /* Set MII clock */
++      clrsetbits_le32(&regs->mac_mcfg, 0xf << 2, 0xd << 2);
++
++      dev->iobase = (int)regs;
++      dev->priv = priv;
++      dev->init = sunxi_emac_eth_init;
++      dev->halt = sunxi_emac_eth_halt;
++      dev->send = sunxi_emac_eth_send;
++      dev->recv = sunxi_emac_eth_recv;
++      strcpy(dev->name, "emac");
++
++      eth_register(dev);
++
++      miiphy_register(dev->name, emac_phy_read, emac_phy_write);
++
++      return 0;
++}
+diff -ruN u-boot-2014.04/drivers/net/sunxi_wemac.c u-boot-sunxi/drivers/net/sunxi_wemac.c
+--- u-boot-2014.04/drivers/net/sunxi_wemac.c   2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/drivers/net/sunxi_wemac.c     1970-01-01 01:00:00.000000000 +0100
+@@ -1,525 +0,0 @@
+-/*
+- * sunxi_wemac.c -- Allwinner A10 ethernet driver
+- *
+- * (C) Copyright 2012, Stefan Roese <sr@denx.de>
+- *
+- * SPDX-License-Identifier:   GPL-2.0+
+- */
+-
+-#include <common.h>
+-#include <malloc.h>
+-#include <net.h>
+-#include <miiphy.h>
+-#include <linux/err.h>
+-#include <asm/io.h>
+-#include <asm/arch/clock.h>
+-#include <asm/arch/gpio.h>
+-
+-/* EMAC register  */
+-struct wemac_regs {
+-      u32 ctl;        /* 0x00 */
+-      u32 tx_mode;    /* 0x04 */
+-      u32 tx_flow;    /* 0x08 */
+-      u32 tx_ctl0;    /* 0x0c */
+-      u32 tx_ctl1;    /* 0x10 */
+-      u32 tx_ins;     /* 0x14 */
+-      u32 tx_pl0;     /* 0x18 */
+-      u32 tx_pl1;     /* 0x1c */
+-      u32 tx_sta;     /* 0x20 */
+-      u32 tx_io_data; /* 0x24 */
+-      u32 tx_io_data1; /* 0x28 */
+-      u32 tx_tsvl0;   /* 0x2c */
+-      u32 tx_tsvh0;   /* 0x30 */
+-      u32 tx_tsvl1;   /* 0x34 */
+-      u32 tx_tsvh1;   /* 0x38 */
+-      u32 rx_ctl;     /* 0x3c */
+-      u32 rx_hash0;   /* 0x40 */
+-      u32 rx_hash1;   /* 0x44 */
+-      u32 rx_sta;     /* 0x48 */
+-      u32 rx_io_data; /* 0x4c */
+-      u32 rx_fbc;     /* 0x50 */
+-      u32 int_ctl;    /* 0x54 */
+-      u32 int_sta;    /* 0x58 */
+-      u32 mac_ctl0;   /* 0x5c */
+-      u32 mac_ctl1;   /* 0x60 */
+-      u32 mac_ipgt;   /* 0x64 */
+-      u32 mac_ipgr;   /* 0x68 */
+-      u32 mac_clrt;   /* 0x6c */
+-      u32 mac_maxf;   /* 0x70 */
+-      u32 mac_supp;   /* 0x74 */
+-      u32 mac_test;   /* 0x78 */
+-      u32 mac_mcfg;   /* 0x7c */
+-      u32 mac_mcmd;   /* 0x80 */
+-      u32 mac_madr;   /* 0x84 */
+-      u32 mac_mwtd;   /* 0x88 */
+-      u32 mac_mrdd;   /* 0x8c */
+-      u32 mac_mind;   /* 0x90 */
+-      u32 mac_ssrr;   /* 0x94 */
+-      u32 mac_a0;     /* 0x98 */
+-      u32 mac_a1;     /* 0x9c */
+-};
+-
+-/* SRAMC register  */
+-struct sunxi_sramc_regs {
+-      u32 ctrl0;
+-      u32 ctrl1;
+-};
+-
+-/* 0: Disable       1: Aborted frame enable(default) */
+-#define EMAC_TX_AB_M          (0x1 << 0)
+-/* 0: CPU           1: DMA(default) */
+-#define EMAC_TX_TM            (0x1 << 1)
+-
+-#define EMAC_TX_SETUP         (0)
+-
+-/* 0: DRQ asserted  1: DRQ automatically(default) */
+-#define EMAC_RX_DRQ_MODE      (0x1 << 1)
+-/* 0: CPU           1: DMA(default) */
+-#define EMAC_RX_TM            (0x1 << 2)
+-/* 0: Normal(default)        1: Pass all Frames */
+-#define EMAC_RX_PA            (0x1 << 4)
+-/* 0: Normal(default)        1: Pass Control Frames */
+-#define EMAC_RX_PCF           (0x1 << 5)
+-/* 0: Normal(default)        1: Pass Frames with CRC Error */
+-#define EMAC_RX_PCRCE         (0x1 << 6)
+-/* 0: Normal(default)        1: Pass Frames with Length Error */
+-#define EMAC_RX_PLE           (0x1 << 7)
+-/* 0: Normal                 1: Pass Frames length out of range(default) */
+-#define EMAC_RX_POR           (0x1 << 8)
+-/* 0: Not accept             1: Accept unicast Packets(default) */
+-#define EMAC_RX_UCAD          (0x1 << 16)
+-/* 0: Normal(default)        1: DA Filtering */
+-#define EMAC_RX_DAF           (0x1 << 17)
+-/* 0: Not accept             1: Accept multicast Packets(default) */
+-#define EMAC_RX_MCO           (0x1 << 20)
+-/* 0: Disable(default)       1: Enable Hash filter */
+-#define EMAC_RX_MHF           (0x1 << 21)
+-/* 0: Not accept             1: Accept Broadcast Packets(default) */
+-#define EMAC_RX_BCO           (0x1 << 22)
+-/* 0: Disable(default)       1: Enable SA Filtering */
+-#define EMAC_RX_SAF           (0x1 << 24)
+-/* 0: Normal(default)        1: Inverse Filtering */
+-#define EMAC_RX_SAIF          (0x1 << 25)
+-
+-#define EMAC_RX_SETUP         (EMAC_RX_POR | EMAC_RX_UCAD | EMAC_RX_DAF | \
+-                               EMAC_RX_MCO | EMAC_RX_BCO)
+-
+-/* 0: Disable                1: Enable Receive Flow Control(default) */
+-#define EMAC_MAC_CTL0_RFC     (0x1 << 2)
+-/* 0: Disable                1: Enable Transmit Flow Control(default) */
+-#define EMAC_MAC_CTL0_TFC     (0x1 << 3)
+-
+-#define EMAC_MAC_CTL0_SETUP   (EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC)
+-
+-/* 0: Disable                1: Enable MAC Frame Length Checking(default) */
+-#define EMAC_MAC_CTL1_FLC     (0x1 << 1)
+-/* 0: Disable(default)       1: Enable Huge Frame */
+-#define EMAC_MAC_CTL1_HF      (0x1 << 2)
+-/* 0: Disable(default)       1: Enable MAC Delayed CRC */
+-#define EMAC_MAC_CTL1_DCRC    (0x1 << 3)
+-/* 0: Disable                1: Enable MAC CRC(default) */
+-#define EMAC_MAC_CTL1_CRC     (0x1 << 4)
+-/* 0: Disable                1: Enable MAC PAD Short frames(default) */
+-#define EMAC_MAC_CTL1_PC      (0x1 << 5)
+-/* 0: Disable(default)       1: Enable MAC PAD Short frames and append CRC */
+-#define EMAC_MAC_CTL1_VC      (0x1 << 6)
+-/* 0: Disable(default)       1: Enable MAC auto detect Short frames */
+-#define EMAC_MAC_CTL1_ADP     (0x1 << 7)
+-/* 0: Disable(default)       1: Enable */
+-#define EMAC_MAC_CTL1_PRE     (0x1 << 8)
+-/* 0: Disable(default)       1: Enable */
+-#define EMAC_MAC_CTL1_LPE     (0x1 << 9)
+-/* 0: Disable(default)       1: Enable no back off */
+-#define EMAC_MAC_CTL1_NB      (0x1 << 12)
+-/* 0: Disable(default)       1: Enable */
+-#define EMAC_MAC_CTL1_BNB     (0x1 << 13)
+-/* 0: Disable(default)       1: Enable */
+-#define EMAC_MAC_CTL1_ED      (0x1 << 14)
+-
+-#define EMAC_MAC_CTL1_SETUP   (EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \
+-                               EMAC_MAC_CTL1_PC)
+-
+-#define EMAC_MAC_IPGT         0x15
+-
+-#define EMAC_MAC_NBTB_IPG1    0xC
+-#define EMAC_MAC_NBTB_IPG2    0x12
+-
+-#define EMAC_MAC_CW           0x37
+-#define EMAC_MAC_RM           0xF
+-
+-#define EMAC_MAC_MFL          0x0600
+-
+-/* Receive status */
+-#define EMAC_CRCERR           (1 << 4)
+-#define EMAC_LENERR           (3 << 5)
+-
+-#define DMA_CPU_TRRESHOLD     2000
+-
+-struct wemac_eth_dev {
+-      u32 speed;
+-      u32 duplex;
+-      u32 phy_configured;
+-      int link_printed;
+-};
+-
+-struct wemac_rxhdr {
+-      s16 rx_len;
+-      u16 rx_status;
+-};
+-
+-static void wemac_inblk_32bit(void *reg, void *data, int count)
+-{
+-      int cnt = (count + 3) >> 2;
+-
+-      if (cnt) {
+-              u32 *buf = data;
+-
+-              do {
+-                      u32 x = readl(reg);
+-                      *buf++ = x;
+-              } while (--cnt);
+-      }
+-}
+-
+-static void wemac_outblk_32bit(void *reg, void *data, int count)
+-{
+-      int cnt = (count + 3) >> 2;
+-
+-      if (cnt) {
+-              const u32 *buf = data;
+-
+-              do {
+-                      writel(*buf++, reg);
+-              } while (--cnt);
+-      }
+-}
+-
+-/*
+- * Read a word from phyxcer
+- */
+-static int wemac_phy_read(const char *devname, unsigned char addr,
+-                        unsigned char reg, unsigned short *value)
+-{
+-      struct eth_device *dev = eth_get_dev_by_name(devname);
+-      struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
+-
+-      /* issue the phy address and reg */
+-      writel(addr << 8 | reg, &regs->mac_madr);
+-
+-      /* pull up the phy io line */
+-      writel(0x1, &regs->mac_mcmd);
+-
+-      /* Wait read complete */
+-      mdelay(1);
+-
+-      /* push down the phy io line */
+-      writel(0x0, &regs->mac_mcmd);
+-
+-      /* and write data */
+-      *value = readl(&regs->mac_mrdd);
+-
+-      return 0;
+-}
+-
+-/*
+- * Write a word to phyxcer
+- */
+-static int wemac_phy_write(const char *devname, unsigned char addr,
+-                         unsigned char reg, unsigned short value)
+-{
+-      struct eth_device *dev = eth_get_dev_by_name(devname);
+-      struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
+-
+-      /* issue the phy address and reg */
+-      writel(addr << 8 | reg, &regs->mac_madr);
+-
+-      /* pull up the phy io line */
+-      writel(0x1, &regs->mac_mcmd);
+-
+-      /* Wait write complete */
+-      mdelay(1);
+-
+-      /* push down the phy io line */
+-      writel(0x0, &regs->mac_mcmd);
+-
+-      /* and write data */
+-      writel(value, &regs->mac_mwtd);
+-
+-      return 0;
+-}
+-
+-static void emac_setup(struct eth_device *dev)
+-{
+-      struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
+-      u32 reg_val;
+-      u16 phy_val;
+-      u32 duplex_flag;
+-
+-      /* Set up TX */
+-      writel(EMAC_TX_SETUP, &regs->tx_mode);
+-
+-      /* Set up RX */
+-      writel(EMAC_RX_SETUP, &regs->rx_ctl);
+-
+-      /* Set MAC */
+-      /* Set MAC CTL0 */
+-      writel(EMAC_MAC_CTL0_SETUP, &regs->mac_ctl0);
+-
+-      /* Set MAC CTL1 */
+-      wemac_phy_read(dev->name, 1, 0, &phy_val);
+-      debug("PHY SETUP, reg 0 value: %x\n", phy_val);
+-      duplex_flag = !!(phy_val & (1 << 8));
+-
+-      reg_val = 0;
+-      if (duplex_flag)
+-              reg_val = (0x1 << 0);
+-      writel(EMAC_MAC_CTL1_SETUP | reg_val, &regs->mac_ctl1);
+-
+-      /* Set up IPGT */
+-      writel(EMAC_MAC_IPGT, &regs->mac_ipgt);
+-
+-      /* Set up IPGR */
+-      writel(EMAC_MAC_NBTB_IPG2 | (EMAC_MAC_NBTB_IPG1 << 8), &regs->mac_ipgr);
+-
+-      /* Set up Collison window */
+-      writel(EMAC_MAC_RM | (EMAC_MAC_CW << 8), &regs->mac_clrt);
+-
+-      /* Set up Max Frame Length */
+-      writel(EMAC_MAC_MFL, &regs->mac_maxf);
+-}
+-
+-static void wemac_reset(struct eth_device *dev)
+-{
+-      struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
+-
+-      debug("resetting device\n");
+-
+-      /* RESET device */
+-      writel(0, &regs->ctl);
+-      udelay(200);
+-
+-      writel(1, &regs->ctl);
+-      udelay(200);
+-}
+-
+-static int sunxi_wemac_eth_init(struct eth_device *dev, bd_t *bd)
+-{
+-      struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
+-      struct wemac_eth_dev *priv = dev->priv;
+-      u16 phy_reg;
+-
+-      /* Init EMAC */
+-
+-      /* Flush RX FIFO */
+-      setbits_le32(&regs->rx_ctl, 0x8);
+-      udelay(1);
+-
+-      /* Init MAC */
+-
+-      /* Soft reset MAC */
+-      clrbits_le32(&regs->mac_ctl0, 1 << 15);
+-
+-      /* Set MII clock */
+-      clrsetbits_le32(&regs->mac_mcfg, 0xf << 2, 0xd << 2);
+-
+-      /* Clear RX counter */
+-      writel(0x0, &regs->rx_fbc);
+-      udelay(1);
+-
+-      /* Set up EMAC */
+-      emac_setup(dev);
+-
+-      writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 |
+-             dev->enetaddr[2], &regs->mac_a1);
+-      writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 |
+-             dev->enetaddr[5], &regs->mac_a0);
+-
+-      mdelay(1);
+-
+-      wemac_reset(dev);
+-
+-      /* PHY POWER UP */
+-      wemac_phy_read(dev->name, 1, 0, &phy_reg);
+-      wemac_phy_write(dev->name, 1, 0, phy_reg & (~(1 << 11)));
+-      mdelay(1);
+-
+-      wemac_phy_read(dev->name, 1, 0, &phy_reg);
+-
+-      priv->speed = miiphy_speed(dev->name, 0);
+-      priv->duplex = miiphy_duplex(dev->name, 0);
+-
+-      /* Print link status only once */
+-      if (!priv->link_printed) {
+-              printf("ENET Speed is %d Mbps - %s duplex connection\n",
+-                     priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL");
+-              priv->link_printed = 1;
+-      }
+-
+-      /* Set EMAC SPEED depend on PHY */
+-      clrsetbits_le32(&regs->mac_supp, 1 << 8,
+-                      ((phy_reg & (1 << 13)) >> 13) << 8);
+-
+-      /* Set duplex depend on phy */
+-      clrsetbits_le32(&regs->mac_ctl1, 1 << 0,
+-                      ((phy_reg & (1 << 8)) >> 8) << 0);
+-
+-      /* Enable RX/TX */
+-      setbits_le32(&regs->ctl, 0x7);
+-
+-      return 0;
+-}
+-
+-static void sunxi_wemac_eth_halt(struct eth_device *dev)
+-{
+-      /* Nothing to do here */
+-}
+-
+-static int sunxi_wemac_eth_recv(struct eth_device *dev)
+-{
+-      struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
+-      struct wemac_rxhdr rxhdr;
+-      u32 rxcount;
+-      u32 reg_val;
+-      int rx_len;
+-      int rx_status;
+-      int good_packet;
+-
+-      /* Check packet ready or not */
+-
+-      /*
+-       * Race warning: The first packet might arrive with
+-       * the interrupts disabled, but the second will fix
+-       */
+-      rxcount = readl(&regs->rx_fbc);
+-      if (!rxcount) {
+-              /* Had one stuck? */
+-              rxcount = readl(&regs->rx_fbc);
+-              if (!rxcount)
+-                      return 0;
+-      }
+-
+-      reg_val = readl(&regs->rx_io_data);
+-      if (reg_val != 0x0143414d) {
+-              /* Disable RX */
+-              clrbits_le32(&regs->ctl, 1 << 2);
+-
+-              /* Flush RX FIFO */
+-              setbits_le32(&regs->rx_ctl, 1 << 3);
+-              while (readl(&regs->rx_ctl) & (1 << 3))
+-                      ;
+-
+-              /* Enable RX */
+-              setbits_le32(&regs->ctl, 1 << 2);
+-
+-              return 0;
+-      }
+-
+-      /*
+-       * A packet ready now
+-       * Get status/length
+-       */
+-      good_packet = 1;
+-
+-      wemac_inblk_32bit(&regs->rx_io_data, &rxhdr, sizeof(rxhdr));
+-
+-      rx_len = rxhdr.rx_len;
+-      rx_status = rxhdr.rx_status;
+-
+-      /* Packet Status check */
+-      if (rx_len < 0x40) {
+-              good_packet = 0;
+-              debug("RX: Bad Packet (runt)\n");
+-      }
+-
+-      /* rx_status is identical to RSR register. */
+-      if (0 & rx_status & (EMAC_CRCERR | EMAC_LENERR)) {
+-              good_packet = 0;
+-              if (rx_status & EMAC_CRCERR)
+-                      printf("crc error\n");
+-              if (rx_status & EMAC_LENERR)
+-                      printf("length error\n");
+-      }
+-
+-      /* Move data from WEMAC */
+-      if (good_packet) {
+-              if (rx_len > DMA_CPU_TRRESHOLD) {
+-                      printf("Received packet is too big (len=%d)\n", rx_len);
+-              } else {
+-                      wemac_inblk_32bit((void *)&regs->rx_io_data,
+-                                        NetRxPackets[0], rx_len);
+-
+-                      /* Pass to upper layer */
+-                      NetReceive(NetRxPackets[0], rx_len);
+-                      return rx_len;
+-              }
+-      }
+-
+-      return 0;
+-}
+-
+-static int sunxi_wemac_eth_send(struct eth_device *dev, void *packet, int len)
+-{
+-      struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
+-
+-      /* Select channel 0 */
+-      writel(0, &regs->tx_ins);
+-
+-      /* Write packet */
+-      wemac_outblk_32bit((void *)&regs->tx_io_data, packet, len);
+-
+-      /* Set TX len */
+-      writel(len, &regs->tx_pl0);
+-
+-      /* Start translate from fifo to phy */
+-      setbits_le32(&regs->tx_ctl0, 1);
+-
+-      return 0;
+-}
+-
+-int sunxi_wemac_initialize(void)
+-{
+-      struct sunxi_ccm_reg *const ccm =
+-              (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+-      struct sunxi_sramc_regs *sram =
+-              (struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE;
+-      struct eth_device *dev;
+-      struct wemac_eth_dev *priv;
+-      int pin;
+-
+-      dev = malloc(sizeof(*dev));
+-      if (dev == NULL)
+-              return -ENOMEM;
+-
+-      priv = (struct wemac_eth_dev *)malloc(sizeof(struct wemac_eth_dev));
+-      if (!priv) {
+-              free(dev);
+-              return -ENOMEM;
+-      }
+-
+-      memset(dev, 0, sizeof(*dev));
+-      memset(priv, 0, sizeof(struct wemac_eth_dev));
+-
+-      /* Map SRAM to EMAC */
+-      setbits_le32(&sram->ctrl1, 0x5 << 2);
+-
+-      /* Configure pin mux settings for MII Ethernet */
+-      for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++)
+-              sunxi_gpio_set_cfgpin(pin, 2);
+-
+-      /* Set up clock gating */
+-      setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_EMAC);
+-
+-      dev->iobase = SUNXI_EMAC_BASE;
+-      dev->priv = priv;
+-      dev->init = sunxi_wemac_eth_init;
+-      dev->halt = sunxi_wemac_eth_halt;
+-      dev->send = sunxi_wemac_eth_send;
+-      dev->recv = sunxi_wemac_eth_recv;
+-      strcpy(dev->name, "wemac");
+-
+-      eth_register(dev);
+-
+-      miiphy_register(dev->name, wemac_phy_read, wemac_phy_write);
+-
+-      return 0;
+-}
+diff -ruN u-boot-2014.04/drivers/power/axp152.c u-boot-sunxi/drivers/power/axp152.c
+--- u-boot-2014.04/drivers/power/axp152.c      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/drivers/power/axp152.c        2014-09-06 16:58:36.321953111 +0200
+@@ -0,0 +1,112 @@
++/*
++ * (C) Copyright 2012
++ * Henrik Nordstrom <henrik@henriknordstrom.net>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++#include <common.h>
++#include <i2c.h>
++#include <axp152.h>
++
++enum axp152_reg {
++      AXP152_CHIP_VERSION = 0x3,
++      AXP152_DCDC2_VOLTAGE = 0x23,
++      AXP152_DCDC3_VOLTAGE = 0x27,
++      AXP152_DCDC4_VOLTAGE = 0x2B,
++      AXP152_LDO2_VOLTAGE = 0x2A,
++      AXP152_SHUTDOWN = 0x32,
++};
++
++#define AXP152_POWEROFF                       (1 << 7)
++
++static int axp152_write(enum axp152_reg reg, u8 val)
++{
++      return i2c_write(0x30, reg, 1, &val, 1);
++}
++
++static int axp152_read(enum axp152_reg reg, u8 *val)
++{
++      return i2c_read(0x30, reg, 1, val, 1);
++}
++
++static int axp152_mvolt_to_target(int mvolt, int min, int max, int div)
++{
++      if (mvolt < min)
++              mvolt = min;
++      else if (mvolt > max)
++              mvolt = max;
++
++      return (mvolt - min) / div;
++}
++
++int axp152_set_dcdc2(int mvolt)
++{
++      int rc, target;
++      u8 current;
++
++      target = axp152_mvolt_to_target(mvolt, 700, 2275, 25);
++
++      /* Do we really need to be this gentle? It has built-in voltage slope */
++      while ((rc = axp152_read(AXP152_DCDC2_VOLTAGE, &current)) == 0 &&
++             current != target) {
++              if (current < target)
++                      current++;
++              else
++                      current--;
++              rc = axp152_write(AXP152_DCDC2_VOLTAGE, current);
++              if (rc)
++                      break;
++      }
++      return rc;
++}
++
++int axp152_set_dcdc3(int mvolt)
++{
++      int target = axp152_mvolt_to_target(mvolt, 700, 3500, 25);
++
++      return axp152_write(AXP152_DCDC3_VOLTAGE, target);
++}
++
++int axp152_set_dcdc4(int mvolt)
++{
++      int target = axp152_mvolt_to_target(mvolt, 700, 3500, 25);
++
++      return axp152_write(AXP152_DCDC4_VOLTAGE, target);
++}
++
++int axp152_set_ldo2(int mvolt)
++{
++      int target = axp152_mvolt_to_target(mvolt, 700, 3500, 100);
++
++      return axp152_write(AXP152_LDO2_VOLTAGE, target);
++}
++
++void axp152_poweroff(void)
++{
++      u8 val;
++
++      if (axp152_read(AXP152_SHUTDOWN, &val) != 0)
++              return;
++
++      val |= AXP152_POWEROFF;
++
++      if (axp152_write(AXP152_SHUTDOWN, val) != 0)
++              return;
++
++      udelay(10000);  /* wait for power to drain */
++}
++
++int axp152_init(void)
++{
++      u8 ver;
++      int rc;
++
++      rc = axp152_read(AXP152_CHIP_VERSION, &ver);
++      if (rc)
++              return rc;
++
++      if (ver != 0x05)
++              return -1;
++
++      return 0;
++}
+diff -ruN u-boot-2014.04/drivers/power/axp209.c u-boot-sunxi/drivers/power/axp209.c
+--- u-boot-2014.04/drivers/power/axp209.c      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/drivers/power/axp209.c        2014-09-06 16:58:36.321953111 +0200
+@@ -0,0 +1,180 @@
++/*
++ * (C) Copyright 2012
++ * Henrik Nordstrom <henrik@henriknordstrom.net>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#include <i2c.h>
++#include <axp209.h>
++
++enum axp209_reg {
++      AXP209_POWER_STATUS = 0x00,
++      AXP209_CHIP_VERSION = 0x03,
++      AXP209_DCDC2_VOLTAGE = 0x23,
++      AXP209_DCDC3_VOLTAGE = 0x27,
++      AXP209_LDO24_VOLTAGE = 0x28,
++      AXP209_LDO3_VOLTAGE = 0x29,
++      AXP209_IRQ_STATUS5 = 0x4c,
++      AXP209_SHUTDOWN = 0x32,
++};
++
++#define AXP209_POWER_STATUS_ON_BY_DC  (1 << 0)
++
++#define AXP209_IRQ5_PEK_UP            (1 << 6)
++#define AXP209_IRQ5_PEK_DOWN          (1 << 5)
++
++#define AXP209_POWEROFF                       (1 << 7)
++
++static int axp209_write(enum axp209_reg reg, u8 val)
++{
++      return i2c_write(0x34, reg, 1, &val, 1);
++}
++
++static int axp209_read(enum axp209_reg reg, u8 *val)
++{
++      return i2c_read(0x34, reg, 1, val, 1);
++}
++
++static int axp209_mvolt_to_cfg(int mvolt, int min, int max, int div)
++{
++      if (mvolt < min)
++              mvolt = min;
++      else if (mvolt > max)
++              mvolt = max;
++
++      return (mvolt - min) / div;
++}
++
++int axp209_set_dcdc2(int mvolt)
++{
++      int cfg, rc;
++      u8 current;
++
++      cfg = axp209_mvolt_to_cfg(mvolt, 700, 2275, 25);
++
++      /* Do we really need to be this gentle? It has built-in voltage slope */
++      while ((rc = axp209_read(AXP209_DCDC2_VOLTAGE, &current)) == 0 &&
++             current != cfg) {
++              if (current < cfg)
++                      current++;
++              else
++                      current--;
++
++              rc = axp209_write(AXP209_DCDC2_VOLTAGE, current);
++              if (rc)
++                      break;
++      }
++
++      return rc;
++}
++
++int axp209_set_dcdc3(int mvolt)
++{
++      int cfg = axp209_mvolt_to_cfg(mvolt, 700, 3500, 25);
++
++      return axp209_write(AXP209_DCDC3_VOLTAGE, cfg);
++}
++
++int axp209_set_ldo2(int mvolt)
++{
++      int rc, cfg;
++      u8 reg;
++
++      cfg = axp209_mvolt_to_cfg(mvolt, 1800, 3300, 100);
++
++      rc = axp209_read(AXP209_LDO24_VOLTAGE, &reg);
++      if (rc)
++              return rc;
++
++      /* LDO2 configuration is in upper 4 bits */
++      reg = (reg & 0x0f) | (cfg << 4);
++      return axp209_write(AXP209_LDO24_VOLTAGE, reg);
++}
++
++int axp209_set_ldo3(int mvolt)
++{
++      int cfg = axp209_mvolt_to_cfg(mvolt, 700, 2275, 25);
++
++      if (mvolt == -1)
++              cfg = 0x80;     /* determined by LDO3IN pin */
++
++      return axp209_write(AXP209_LDO3_VOLTAGE, cfg);
++}
++
++int axp209_set_ldo4(int mvolt)
++{
++      int cfg, rc;
++      static const int vindex[] = {
++              1250, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000, 2500,
++              2700, 2800, 3000, 3100, 3200, 3300
++      };
++      u8 reg;
++
++      /* Translate mvolt to register cfg value, requested <= selected */
++      for (cfg = 15; vindex[cfg] > mvolt && cfg > 0; cfg--);
++
++      rc = axp209_read(AXP209_LDO24_VOLTAGE, &reg);
++      if (rc)
++              return rc;
++
++      /* LDO4 configuration is in lower 4 bits */
++      reg = (reg & 0xf0) | (cfg << 0);
++      return axp209_write(AXP209_LDO24_VOLTAGE, reg);
++}
++
++void axp209_poweroff(void)
++{
++      u8 val;
++
++      if (axp209_read(AXP209_SHUTDOWN, &val) != 0)
++              return;
++
++      val |= AXP209_POWEROFF;
++
++      if (axp209_write(AXP209_SHUTDOWN, val) != 0)
++              return;
++
++      udelay(10000);          /* wait for power to drain */
++}
++
++int axp209_init(void)
++{
++      u8 ver;
++      int rc;
++
++      rc = axp209_read(AXP209_CHIP_VERSION, &ver);
++      if (rc)
++              return rc;
++
++      /* Low 4 bits is chip version */
++      ver &= 0x0f;
++
++      if (ver != 0x1)
++              return -1;
++
++      return 0;
++}
++
++int axp209_poweron_by_dc(void)
++{
++      u8 v;
++
++      if (axp209_read(AXP209_POWER_STATUS, &v))
++              return 0;
++
++      return (v & AXP209_POWER_STATUS_ON_BY_DC);
++}
++
++int axp209_power_button(void)
++{
++      u8 v;
++
++      if (axp209_read(AXP209_IRQ_STATUS5, &v))
++              return 0;
++
++      axp209_write(AXP209_IRQ_STATUS5, AXP209_IRQ5_PEK_DOWN);
++
++      return v & AXP209_IRQ5_PEK_DOWN;
++}
+diff -ruN u-boot-2014.04/drivers/power/axp221.c u-boot-sunxi/drivers/power/axp221.c
+--- u-boot-2014.04/drivers/power/axp221.c      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/drivers/power/axp221.c        2014-09-06 16:58:36.321953111 +0200
+@@ -0,0 +1,73 @@
++/*
++ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#include <common.h>
++#include <errno.h>
++#include <asm/arch/p2wi.h>
++#include <axp221.h>
++
++int axp221_set_dcdc1(unsigned int mvolt)
++{
++      return p2wi_write(AXP221_DCDC1_CTRL, (mvolt - 1600) / 100);
++}
++
++int axp221_set_dcdc2(unsigned int mvolt)
++{
++      return p2wi_write(AXP221_DCDC2_CTRL, (mvolt - 600) / 20);
++}
++
++int axp221_set_dcdc3(unsigned int mvolt)
++{
++      return p2wi_write(AXP221_DCDC3_CTRL, (mvolt - 600) / 20);
++}
++
++int axp221_set_dcdc4(unsigned int mvolt)
++{
++      return p2wi_write(AXP221_DCDC4_CTRL, (mvolt - 600) / 20);
++}
++
++int axp221_set_dcdc5(unsigned int mvolt)
++{
++      return p2wi_write(AXP221_DCDC5_CTRL, (mvolt - 600) / 20);
++}
++
++int axp221_set_dldo1(unsigned int mvolt)
++{
++      int ret;
++      u8 val;
++
++      ret = p2wi_write(AXP221_DLDO1_CTRL, (mvolt - 700) / 100);
++      if (ret)
++              return ret;
++
++      ret = p2wi_read(AXP221_OUTPUT_CTRL2, &val);
++      if (ret)
++              return ret;
++
++      val |= 1 << 3;
++      return p2wi_write(AXP221_OUTPUT_CTRL2, val);
++}
++
++int axp221_init(void)
++{
++      u8 axp_chip_id;
++      int ret;
++
++      p2wi_init();
++      ret = p2wi_set_pmu_address(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR,
++                                 AXP221_INIT_DATA);
++      if (ret)
++              return ret;
++
++      ret = p2wi_read(AXP221_CHIP_ID, &axp_chip_id);
++      if (ret)
++              return ret;
++
++      if (!(axp_chip_id == 0x6 || axp_chip_id == 0x7 || axp_chip_id == 0x17))
++              return -ENODEV;
++
++      return 0;
++}
+diff -ruN u-boot-2014.04/drivers/power/Makefile u-boot-sunxi/drivers/power/Makefile
+--- u-boot-2014.04/drivers/power/Makefile      2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/drivers/power/Makefile        2014-09-06 16:58:36.321953111 +0200
+@@ -5,6 +5,9 @@
+ # SPDX-License-Identifier:    GPL-2.0+
+ #
+ 
++obj-$(CONFIG_AXP152_POWER)    += axp152.o
++obj-$(CONFIG_AXP209_POWER)    += axp209.o
++obj-$(CONFIG_AXP221_POWER)    += axp221.o
+ obj-$(CONFIG_EXYNOS_TMU)      += exynos-tmu.o
+ obj-$(CONFIG_FTPMU010_POWER)  += ftpmu010.o
+ obj-$(CONFIG_TPS6586X_POWER)  += tps6586x.o
+diff -ruN u-boot-2014.04/drivers/serial/arm_dcc.c u-boot-sunxi/drivers/serial/arm_dcc.c
+--- u-boot-2014.04/drivers/serial/arm_dcc.c    2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/drivers/serial/arm_dcc.c      2014-09-06 16:58:36.329953111 +0200
+@@ -29,7 +29,7 @@
+ #include <common.h>
+ #include <serial.h>
+ 
+-#if defined(CONFIG_CPU_V6)
++#if defined(CONFIG_CPU_V6) || 1
+ /*
+  * ARMV6
+  */
+diff -ruN u-boot-2014.04/.git/config u-boot-sunxi/.git/config
+--- u-boot-2014.04/.git/config 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/.git/config   2014-09-06 16:58:35.001953150 +0200
+@@ -0,0 +1,11 @@
++[core]
++      repositoryformatversion = 0
++      filemode = true
++      bare = false
++      logallrefupdates = true
++[remote "origin"]
++      fetch = +refs/heads/*:refs/remotes/origin/*
++      url = https://github.com/linux-sunxi/u-boot-sunxi
++[branch "sunxi"]
++      remote = origin
++      merge = refs/heads/sunxi
+diff -ruN u-boot-2014.04/.git/description u-boot-sunxi/.git/description
+--- u-boot-2014.04/.git/description    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/.git/description      2014-09-06 16:58:09.553953909 +0200
+@@ -0,0 +1 @@
++Unnamed repository; edit this file 'description' to name the repository.
+diff -ruN u-boot-2014.04/.git/HEAD u-boot-sunxi/.git/HEAD
+--- u-boot-2014.04/.git/HEAD   1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/.git/HEAD     2014-09-06 16:58:35.001953150 +0200
+@@ -0,0 +1 @@
++ref: refs/heads/sunxi
+diff -ruN u-boot-2014.04/.git/hooks/applypatch-msg.sample u-boot-sunxi/.git/hooks/applypatch-msg.sample
+--- u-boot-2014.04/.git/hooks/applypatch-msg.sample    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/.git/hooks/applypatch-msg.sample      2014-09-06 16:58:09.553953909 +0200
+@@ -0,0 +1,15 @@
++#!/bin/sh
++#
++# An example hook script to check the commit log message taken by
++# applypatch from an e-mail message.
++#
++# The hook should exit with non-zero status after issuing an
++# appropriate message if it wants to stop the commit.  The hook is
++# allowed to edit the commit message file.
++#
++# To enable this hook, rename this file to "applypatch-msg".
++
++. git-sh-setup
++test -x "$GIT_DIR/hooks/commit-msg" &&
++      exec "$GIT_DIR/hooks/commit-msg" ${1+"$@"}
++:
+diff -ruN u-boot-2014.04/.git/hooks/commit-msg.sample u-boot-sunxi/.git/hooks/commit-msg.sample
+--- u-boot-2014.04/.git/hooks/commit-msg.sample        1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/.git/hooks/commit-msg.sample  2014-09-06 16:58:09.553953909 +0200
+@@ -0,0 +1,24 @@
++#!/bin/sh
++#
++# An example hook script to check the commit log message.
++# Called by "git commit" with one argument, the name of the file
++# that has the commit message.  The hook should exit with non-zero
++# status after issuing an appropriate message if it wants to stop the
++# commit.  The hook is allowed to edit the commit message file.
++#
++# To enable this hook, rename this file to "commit-msg".
++
++# Uncomment the below to add a Signed-off-by line to the message.
++# Doing this in a hook is a bad idea in general, but the prepare-commit-msg
++# hook is more suited to it.
++#
++# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p')
++# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1"
++
++# This example catches duplicate Signed-off-by lines.
++
++test "" = "$(grep '^Signed-off-by: ' "$1" |
++       sort | uniq -c | sed -e '/^[   ]*1[    ]/d')" || {
++      echo >&2 Duplicate Signed-off-by lines.
++      exit 1
++}
+diff -ruN u-boot-2014.04/.git/hooks/post-update.sample u-boot-sunxi/.git/hooks/post-update.sample
+--- u-boot-2014.04/.git/hooks/post-update.sample       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/.git/hooks/post-update.sample 2014-09-06 16:58:09.553953909 +0200
+@@ -0,0 +1,8 @@
++#!/bin/sh
++#
++# An example hook script to prepare a packed repository for use over
++# dumb transports.
++#
++# To enable this hook, rename this file to "post-update".
++
++exec git update-server-info
+diff -ruN u-boot-2014.04/.git/hooks/pre-applypatch.sample u-boot-sunxi/.git/hooks/pre-applypatch.sample
+--- u-boot-2014.04/.git/hooks/pre-applypatch.sample    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/.git/hooks/pre-applypatch.sample      2014-09-06 16:58:09.553953909 +0200
+@@ -0,0 +1,14 @@
++#!/bin/sh
++#
++# An example hook script to verify what is about to be committed
++# by applypatch from an e-mail message.
++#
++# The hook should exit with non-zero status after issuing an
++# appropriate message if it wants to stop the commit.
++#
++# To enable this hook, rename this file to "pre-applypatch".
++
++. git-sh-setup
++test -x "$GIT_DIR/hooks/pre-commit" &&
++      exec "$GIT_DIR/hooks/pre-commit" ${1+"$@"}
++:
+diff -ruN u-boot-2014.04/.git/hooks/pre-commit.sample u-boot-sunxi/.git/hooks/pre-commit.sample
+--- u-boot-2014.04/.git/hooks/pre-commit.sample        1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/.git/hooks/pre-commit.sample  2014-09-06 16:58:09.553953909 +0200
+@@ -0,0 +1,50 @@
++#!/bin/sh
++#
++# An example hook script to verify what is about to be committed.
++# Called by "git commit" with no arguments.  The hook should
++# exit with non-zero status after issuing an appropriate message if
++# it wants to stop the commit.
++#
++# To enable this hook, rename this file to "pre-commit".
++
++if git rev-parse --verify HEAD >/dev/null 2>&1
++then
++      against=HEAD
++else
++      # Initial commit: diff against an empty tree object
++      against=4b825dc642cb6eb9a060e54bf8d69288fbee4904
++fi
++
++# If you want to allow non-ascii filenames set this variable to true.
++allownonascii=$(git config hooks.allownonascii)
++
++# Redirect output to stderr.
++exec 1>&2
++
++# Cross platform projects tend to avoid non-ascii filenames; prevent
++# them from being added to the repository. We exploit the fact that the
++# printable range starts at the space character and ends with tilde.
++if [ "$allownonascii" != "true" ] &&
++      # Note that the use of brackets around a tr range is ok here, (it's
++      # even required, for portability to Solaris 10's /usr/bin/tr), since
++      # the square bracket bytes happen to fall in the designated range.
++      test $(git diff --cached --name-only --diff-filter=A -z $against |
++        LC_ALL=C tr -d '[ -~]\0' | wc -c) != 0
++then
++      echo "Error: Attempt to add a non-ascii file name."
++      echo
++      echo "This can cause problems if you want to work"
++      echo "with people on other platforms."
++      echo
++      echo "To be portable it is advisable to rename the file ..."
++      echo
++      echo "If you know what you are doing you can disable this"
++      echo "check using:"
++      echo
++      echo "  git config hooks.allownonascii true"
++      echo
++      exit 1
++fi
++
++# If there are whitespace errors, print the offending file names and fail.
++exec git diff-index --check --cached $against --
+diff -ruN u-boot-2014.04/.git/hooks/prepare-commit-msg.sample u-boot-sunxi/.git/hooks/prepare-commit-msg.sample
+--- u-boot-2014.04/.git/hooks/prepare-commit-msg.sample        1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/.git/hooks/prepare-commit-msg.sample  2014-09-06 16:58:09.553953909 +0200
+@@ -0,0 +1,36 @@
++#!/bin/sh
++#
++# An example hook script to prepare the commit log message.
++# Called by "git commit" with the name of the file that has the
++# commit message, followed by the description of the commit
++# message's source.  The hook's purpose is to edit the commit
++# message file.  If the hook fails with a non-zero status,
++# the commit is aborted.
++#
++# To enable this hook, rename this file to "prepare-commit-msg".
++
++# This hook includes three examples.  The first comments out the
++# "Conflicts:" part of a merge commit.
++#
++# The second includes the output of "git diff --name-status -r"
++# into the message, just before the "git status" output.  It is
++# commented because it doesn't cope with --amend or with squashed
++# commits.
++#
++# The third example adds a Signed-off-by line to the message, that can
++# still be edited.  This is rarely a good idea.
++
++case "$2,$3" in
++  merge,)
++    /usr/bin/perl -i.bak -ne 's/^/# /, s/^# #/#/ if /^Conflicts/ .. /#/; print' "$1" ;;
++
++# ,|template,)
++#   /usr/bin/perl -i.bak -pe '
++#      print "\n" . `git diff --cached --name-status -r`
++#      if /^#/ && $first++ == 0' "$1" ;;
++
++  *) ;;
++esac
++
++# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p')
++# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1"
+diff -ruN u-boot-2014.04/.git/hooks/pre-rebase.sample u-boot-sunxi/.git/hooks/pre-rebase.sample
+--- u-boot-2014.04/.git/hooks/pre-rebase.sample        1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/.git/hooks/pre-rebase.sample  2014-09-06 16:58:09.553953909 +0200
+@@ -0,0 +1,169 @@
++#!/bin/sh
++#
++# Copyright (c) 2006, 2008 Junio C Hamano
++#
++# The "pre-rebase" hook is run just before "git rebase" starts doing
++# its job, and can prevent the command from running by exiting with
++# non-zero status.
++#
++# The hook is called with the following parameters:
++#
++# $1 -- the upstream the series was forked from.
++# $2 -- the branch being rebased (or empty when rebasing the current branch).
++#
++# This sample shows how to prevent topic branches that are already
++# merged to 'next' branch from getting rebased, because allowing it
++# would result in rebasing already published history.
++
++publish=next
++basebranch="$1"
++if test "$#" = 2
++then
++      topic="refs/heads/$2"
++else
++      topic=`git symbolic-ref HEAD` ||
++      exit 0 ;# we do not interrupt rebasing detached HEAD
++fi
++
++case "$topic" in
++refs/heads/??/*)
++      ;;
++*)
++      exit 0 ;# we do not interrupt others.
++      ;;
++esac
++
++# Now we are dealing with a topic branch being rebased
++# on top of master.  Is it OK to rebase it?
++
++# Does the topic really exist?
++git show-ref -q "$topic" || {
++      echo >&2 "No such branch $topic"
++      exit 1
++}
++
++# Is topic fully merged to master?
++not_in_master=`git rev-list --pretty=oneline ^master "$topic"`
++if test -z "$not_in_master"
++then
++      echo >&2 "$topic is fully merged to master; better remove it."
++      exit 1 ;# we could allow it, but there is no point.
++fi
++
++# Is topic ever merged to next?  If so you should not be rebasing it.
++only_next_1=`git rev-list ^master "^$topic" ${publish} | sort`
++only_next_2=`git rev-list ^master           ${publish} | sort`
++if test "$only_next_1" = "$only_next_2"
++then
++      not_in_topic=`git rev-list "^$topic" master`
++      if test -z "$not_in_topic"
++      then
++              echo >&2 "$topic is already up-to-date with master"
++              exit 1 ;# we could allow it, but there is no point.
++      else
++              exit 0
++      fi
++else
++      not_in_next=`git rev-list --pretty=oneline ^${publish} "$topic"`
++      /usr/bin/perl -e '
++              my $topic = $ARGV[0];
++              my $msg = "* $topic has commits already merged to public branch:\n";
++              my (%not_in_next) = map {
++                      /^([0-9a-f]+) /;
++                      ($1 => 1);
++              } split(/\n/, $ARGV[1]);
++              for my $elem (map {
++                              /^([0-9a-f]+) (.*)$/;
++                              [$1 => $2];
++                      } split(/\n/, $ARGV[2])) {
++                      if (!exists $not_in_next{$elem->[0]}) {
++                              if ($msg) {
++                                      print STDERR $msg;
++                                      undef $msg;
++                              }
++                              print STDERR " $elem->[1]\n";
++                      }
++              }
++      ' "$topic" "$not_in_next" "$not_in_master"
++      exit 1
++fi
++
++<<\DOC_END
++
++This sample hook safeguards topic branches that have been
++published from being rewound.
++
++The workflow assumed here is:
++
++ * Once a topic branch forks from "master", "master" is never
++   merged into it again (either directly or indirectly).
++
++ * Once a topic branch is fully cooked and merged into "master",
++   it is deleted.  If you need to build on top of it to correct
++   earlier mistakes, a new topic branch is created by forking at
++   the tip of the "master".  This is not strictly necessary, but
++   it makes it easier to keep your history simple.
++
++ * Whenever you need to test or publish your changes to topic
++   branches, merge them into "next" branch.
++
++The script, being an example, hardcodes the publish branch name
++to be "next", but it is trivial to make it configurable via
++$GIT_DIR/config mechanism.
++
++With this workflow, you would want to know:
++
++(1) ... if a topic branch has ever been merged to "next".  Young
++    topic branches can have stupid mistakes you would rather
++    clean up before publishing, and things that have not been
++    merged into other branches can be easily rebased without
++    affecting other people.  But once it is published, you would
++    not want to rewind it.
++
++(2) ... if a topic branch has been fully merged to "master".
++    Then you can delete it.  More importantly, you should not
++    build on top of it -- other people may already want to
++    change things related to the topic as patches against your
++    "master", so if you need further changes, it is better to
++    fork the topic (perhaps with the same name) afresh from the
++    tip of "master".
++
++Let's look at this example:
++
++                 o---o---o---o---o---o---o---o---o---o "next"
++                /       /           /           /
++               /   a---a---b A     /           /
++              /   /               /           /
++             /   /   c---c---c---c B         /
++            /   /   /             \         /
++           /   /   /   b---b C     \       /
++          /   /   /   /             \     /
++    ---o---o---o---o---o---o---o---o---o---o---o "master"
++
++
++A, B and C are topic branches.
++
++ * A has one fix since it was merged up to "next".
++
++ * B has finished.  It has been fully merged up to "master" and "next",
++   and is ready to be deleted.
++
++ * C has not merged to "next" at all.
++
++We would want to allow C to be rebased, refuse A, and encourage
++B to be deleted.
++
++To compute (1):
++
++      git rev-list ^master ^topic next
++      git rev-list ^master        next
++
++      if these match, topic has not merged in next at all.
++
++To compute (2):
++
++      git rev-list master..topic
++
++      if this is empty, it is fully merged to "master".
++
++DOC_END
+diff -ruN u-boot-2014.04/.git/hooks/update.sample u-boot-sunxi/.git/hooks/update.sample
+--- u-boot-2014.04/.git/hooks/update.sample    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/.git/hooks/update.sample      2014-09-06 16:58:09.553953909 +0200
+@@ -0,0 +1,128 @@
++#!/bin/sh
++#
++# An example hook script to blocks unannotated tags from entering.
++# Called by "git receive-pack" with arguments: refname sha1-old sha1-new
++#
++# To enable this hook, rename this file to "update".
++#
++# Config
++# ------
++# hooks.allowunannotated
++#   This boolean sets whether unannotated tags will be allowed into the
++#   repository.  By default they won't be.
++# hooks.allowdeletetag
++#   This boolean sets whether deleting tags will be allowed in the
++#   repository.  By default they won't be.
++# hooks.allowmodifytag
++#   This boolean sets whether a tag may be modified after creation. By default
++#   it won't be.
++# hooks.allowdeletebranch
++#   This boolean sets whether deleting branches will be allowed in the
++#   repository.  By default they won't be.
++# hooks.denycreatebranch
++#   This boolean sets whether remotely creating branches will be denied
++#   in the repository.  By default this is allowed.
++#
++
++# --- Command line
++refname="$1"
++oldrev="$2"
++newrev="$3"
++
++# --- Safety check
++if [ -z "$GIT_DIR" ]; then
++      echo "Don't run this script from the command line." >&2
++      echo " (if you want, you could supply GIT_DIR then run" >&2
++      echo "  $0 <ref> <oldrev> <newrev>)" >&2
++      exit 1
++fi
++
++if [ -z "$refname" -o -z "$oldrev" -o -z "$newrev" ]; then
++      echo "Usage: $0 <ref> <oldrev> <newrev>" >&2
++      exit 1
++fi
++
++# --- Config
++allowunannotated=$(git config --bool hooks.allowunannotated)
++allowdeletebranch=$(git config --bool hooks.allowdeletebranch)
++denycreatebranch=$(git config --bool hooks.denycreatebranch)
++allowdeletetag=$(git config --bool hooks.allowdeletetag)
++allowmodifytag=$(git config --bool hooks.allowmodifytag)
++
++# check for no description
++projectdesc=$(sed -e '1q' "$GIT_DIR/description")
++case "$projectdesc" in
++"Unnamed repository"* | "")
++      echo "*** Project description file hasn't been set" >&2
++      exit 1
++      ;;
++esac
++
++# --- Check types
++# if $newrev is 0000...0000, it's a commit to delete a ref.
++zero="0000000000000000000000000000000000000000"
++if [ "$newrev" = "$zero" ]; then
++      newrev_type=delete
++else
++      newrev_type=$(git cat-file -t $newrev)
++fi
++
++case "$refname","$newrev_type" in
++      refs/tags/*,commit)
++              # un-annotated tag
++              short_refname=${refname##refs/tags/}
++              if [ "$allowunannotated" != "true" ]; then
++                      echo "*** The un-annotated tag, $short_refname, is not allowed in this repository" >&2
++                      echo "*** Use 'git tag [ -a | -s ]' for tags you want to propagate." >&2
++                      exit 1
++              fi
++              ;;
++      refs/tags/*,delete)
++              # delete tag
++              if [ "$allowdeletetag" != "true" ]; then
++                      echo "*** Deleting a tag is not allowed in this repository" >&2
++                      exit 1
++              fi
++              ;;
++      refs/tags/*,tag)
++              # annotated tag
++              if [ "$allowmodifytag" != "true" ] && git rev-parse $refname > /dev/null 2>&1
++              then
++                      echo "*** Tag '$refname' already exists." >&2
++                      echo "*** Modifying a tag is not allowed in this repository." >&2
++                      exit 1
++              fi
++              ;;
++      refs/heads/*,commit)
++              # branch
++              if [ "$oldrev" = "$zero" -a "$denycreatebranch" = "true" ]; then
++                      echo "*** Creating a branch is not allowed in this repository" >&2
++                      exit 1
++              fi
++              ;;
++      refs/heads/*,delete)
++              # delete branch
++              if [ "$allowdeletebranch" != "true" ]; then
++                      echo "*** Deleting a branch is not allowed in this repository" >&2
++                      exit 1
++              fi
++              ;;
++      refs/remotes/*,commit)
++              # tracking branch
++              ;;
++      refs/remotes/*,delete)
++              # delete tracking branch
++              if [ "$allowdeletebranch" != "true" ]; then
++                      echo "*** Deleting a tracking branch is not allowed in this repository" >&2
++                      exit 1
++              fi
++              ;;
++      *)
++              # Anything else (is there anything else?)
++              echo "*** Update hook: unknown type of update to ref $refname of type $newrev_type" >&2
++              exit 1
++              ;;
++esac
++
++# --- Finished
++exit 0
+Binary files u-boot-2014.04/.git/index and u-boot-sunxi/.git/index differ
+diff -ruN u-boot-2014.04/.git/info/exclude u-boot-sunxi/.git/info/exclude
+--- u-boot-2014.04/.git/info/exclude   1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/.git/info/exclude     2014-09-06 16:58:09.553953909 +0200
+@@ -0,0 +1,6 @@
++# git ls-files --others --exclude-from=.git/info/exclude
++# Lines that start with '#' are comments.
++# For a project mostly in C, the following would be a good set of
++# exclude patterns (uncomment them if you want to use them):
++# *.[oa]
++# *~
+diff -ruN u-boot-2014.04/.git/logs/HEAD u-boot-sunxi/.git/logs/HEAD
+--- u-boot-2014.04/.git/logs/HEAD      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/.git/logs/HEAD        2014-09-06 16:58:35.001953150 +0200
+@@ -0,0 +1 @@
++0000000000000000000000000000000000000000 509d96d4f1f602d62d36db660973249e16f9d088 Zoltan HERPAI <wigyori@uid0.hu> 1410015515 +0200    clone: from https://github.com/linux-sunxi/u-boot-sunxi
+diff -ruN u-boot-2014.04/.git/logs/refs/heads/sunxi u-boot-sunxi/.git/logs/refs/heads/sunxi
+--- u-boot-2014.04/.git/logs/refs/heads/sunxi  1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/.git/logs/refs/heads/sunxi    2014-09-06 16:58:35.001953150 +0200
+@@ -0,0 +1 @@
++0000000000000000000000000000000000000000 509d96d4f1f602d62d36db660973249e16f9d088 Zoltan HERPAI <wigyori@uid0.hu> 1410015515 +0200    clone: from https://github.com/linux-sunxi/u-boot-sunxi
+diff -ruN u-boot-2014.04/.git/logs/refs/remotes/origin/HEAD u-boot-sunxi/.git/logs/refs/remotes/origin/HEAD
+--- u-boot-2014.04/.git/logs/refs/remotes/origin/HEAD  1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/.git/logs/refs/remotes/origin/HEAD    2014-09-06 16:58:35.001953150 +0200
+@@ -0,0 +1 @@
++0000000000000000000000000000000000000000 509d96d4f1f602d62d36db660973249e16f9d088 Zoltan HERPAI <wigyori@uid0.hu> 1410015515 +0200    clone: from https://github.com/linux-sunxi/u-boot-sunxi
+Binary files u-boot-2014.04/.git/objects/pack/pack-67611423d2b8399a45fe3205d396caff441c8135.idx and u-boot-sunxi/.git/objects/pack/pack-67611423d2b8399a45fe3205d396caff441c8135.idx differ
+Binary files u-boot-2014.04/.git/objects/pack/pack-67611423d2b8399a45fe3205d396caff441c8135.pack and u-boot-sunxi/.git/objects/pack/pack-67611423d2b8399a45fe3205d396caff441c8135.pack differ
+diff -ruN u-boot-2014.04/.git/packed-refs u-boot-sunxi/.git/packed-refs
+--- u-boot-2014.04/.git/packed-refs    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/.git/packed-refs      2014-09-06 16:58:35.001953150 +0200
+@@ -0,0 +1,25 @@
++# pack-refs with: peeled 
++3212c6fd4beaa14a21a57e5241022702c986f82e refs/remotes/origin/lichee-dev
++c0860ba179bc0cf016831ceeeacd0dd4e287a860 refs/remotes/origin/lichee-dev-a20
++1076d3bdd67db39f34bc91857c636525874441ae refs/remotes/origin/lichee/lichee-dev
++40b4fba701c1824cc60c7ab966f4a5dd674e947d refs/remotes/origin/lichee/lichee-dev-ICS
++cf54463fd782c690cf790ca35b5a15504b57c287 refs/remotes/origin/lichee/lichee-dev-mmc
++218f643881c0dabd7e40cdb21a757416fa80afb2 refs/remotes/origin/old/sunxi-current
++509d96d4f1f602d62d36db660973249e16f9d088 refs/remotes/origin/sunxi
++43fb1236c3330676f49220cc1dfc235eb0558e4c refs/remotes/origin/sunxi-patchqueue
++80fd9a5c5b87ba2f48f4a71b666839870e780be6 refs/remotes/origin/wip/a20
++27113637710a574d1fb6325817ffa9ced7afe019 refs/tags/v2011.09-sun4i
++^22b38fa5c0348ac4f285f038999f9a617f98e73a
++9ba56441491542cd06b30c514e544d96b29ef801 refs/tags/v2011.09-sun4i-20120808
++88eacf3372855579760ba6bc8fa3e0d4e53fdef8 refs/tags/v2012.10-sunxi
++1ae18d97d24c5d6dd4cb7949d8e5fb602728601c refs/tags/v2013.01-sunxi
++fc40799c144d035c595c4abe3032a03be8f0e2c4 refs/tags/v2013.01.01-sunxi
++90c8c0c88362d1e39bb1433f04b9a21bb1c74e45 refs/tags/v2013.04-sunxi
++57ff4519ba0f47f1647f7def5864ae4c9ef3e6a0 refs/tags/v2013.07-rc1-sunxi
++c416374795b584f025a80b1f81db215456567155 refs/tags/v2013.07-sunxi
++8969c6f654248ececdfcf05eb51de9a8bc0a8703 refs/tags/v2013.07-sunxi.2
++88b1df7ee9c15c821a2209791f513b21596f21b4 refs/tags/v2013.07-sunxi.3
++569c37da7dfd4ed93b6e8b5993df760b9ed18c8d refs/tags/v2013.07-sunxi.4
++7a63a6882876b76e47746c1254e8cd1120a52b0d refs/tags/v2013.10-rc1-sunxi
++951e509384822e39149c22f44cde6a01f5105c40 refs/tags/v2013.10-rc2-sunxi
++09ef3a640a3eb58e66eedcf239193e2ab548e730 refs/tags/v2013.10-sunxi
+diff -ruN u-boot-2014.04/.git/refs/heads/sunxi u-boot-sunxi/.git/refs/heads/sunxi
+--- u-boot-2014.04/.git/refs/heads/sunxi       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/.git/refs/heads/sunxi 2014-09-06 16:58:35.001953150 +0200
+@@ -0,0 +1 @@
++509d96d4f1f602d62d36db660973249e16f9d088
+diff -ruN u-boot-2014.04/.git/refs/remotes/origin/HEAD u-boot-sunxi/.git/refs/remotes/origin/HEAD
+--- u-boot-2014.04/.git/refs/remotes/origin/HEAD       1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/.git/refs/remotes/origin/HEAD 2014-09-06 16:58:35.001953150 +0200
+@@ -0,0 +1 @@
++ref: refs/remotes/origin/sunxi
+diff -ruN u-boot-2014.04/include/axp152.h u-boot-sunxi/include/axp152.h
+--- u-boot-2014.04/include/axp152.h    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/include/axp152.h      2014-09-06 16:58:36.397953109 +0200
+@@ -0,0 +1,11 @@
++/*
++ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++int axp152_set_dcdc2(int mvolt);
++int axp152_set_dcdc3(int mvolt);
++int axp152_set_dcdc4(int mvolt);
++int axp152_set_ldo2(int mvolt);
++void axp152_poweroff(void);
++int axp152_init(void);
+diff -ruN u-boot-2014.04/include/axp209.h u-boot-sunxi/include/axp209.h
+--- u-boot-2014.04/include/axp209.h    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/include/axp209.h      2014-09-06 16:58:36.397953109 +0200
+@@ -0,0 +1,15 @@
++/*
++ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++extern int axp209_set_dcdc2(int mvolt);
++extern int axp209_set_dcdc3(int mvolt);
++extern int axp209_set_ldo2(int mvolt);
++extern int axp209_set_ldo3(int mvolt);
++extern int axp209_set_ldo4(int mvolt);
++extern void axp209_poweroff(void);
++extern int axp209_init(void);
++extern int axp209_poweron_by_dc(void);
++extern int axp209_power_button(void);
+diff -ruN u-boot-2014.04/include/axp221.h u-boot-sunxi/include/axp221.h
+--- u-boot-2014.04/include/axp221.h    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/include/axp221.h      2014-09-06 16:58:36.397953109 +0200
+@@ -0,0 +1,30 @@
++/*
++ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
++ *
++ * X-Powers AXP221 Power Management IC driver
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#define AXP221_CHIP_ADDR 0x68
++#define AXP221_CTRL_ADDR 0x3e
++#define AXP221_INIT_DATA 0x3e
++
++#define AXP221_CHIP_ID                0x03
++#define AXP221_OUTPUT_CTRL1   0x10
++#define AXP221_OUTPUT_CTRL2   0x12
++#define AXP221_OUTPUT_CTRL3   0x13
++#define AXP221_DLDO1_CTRL     0x15
++#define AXP221_DCDC1_CTRL     0x21
++#define AXP221_DCDC2_CTRL     0x22
++#define AXP221_DCDC3_CTRL     0x23
++#define AXP221_DCDC4_CTRL     0x24
++#define AXP221_DCDC5_CTRL     0x25
++
++int axp221_set_dcdc1(unsigned int mvolt);
++int axp221_set_dcdc2(unsigned int mvolt);
++int axp221_set_dcdc3(unsigned int mvolt);
++int axp221_set_dcdc4(unsigned int mvolt);
++int axp221_set_dcdc5(unsigned int mvolt);
++int axp221_set_dldo1(unsigned int mvolt);
++int axp221_init(void);
+diff -ruN u-boot-2014.04/include/config_fallbacks.h u-boot-sunxi/include/config_fallbacks.h
+--- u-boot-2014.04/include/config_fallbacks.h  2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/include/config_fallbacks.h    2014-09-06 16:58:36.401953108 +0200
+@@ -55,6 +55,10 @@
+ #define HAVE_BLOCK_DEVICE
+ #endif
+ 
++#ifndef CONFIG_SYS_BOARD_NAME
++#define CONFIG_SYS_BOARD_NAME CONFIG_SYS_TARGET
++#endif
++
+ #if (defined(CONFIG_PARTITION_UUIDS) || \
+       defined(CONFIG_EFI_PARTITION) || \
+       defined(CONFIG_RANDOM_UUID) || \
+diff -ruN u-boot-2014.04/include/configs/sun4i.h u-boot-sunxi/include/configs/sun4i.h
+--- u-boot-2014.04/include/configs/sun4i.h     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/include/configs/sun4i.h       2014-09-06 16:58:36.461953107 +0200
+@@ -0,0 +1,25 @@
++/*
++ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
++ *
++ * Configuration settings for the Allwinner A10 (sun4i) CPU
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++/*
++ * A10 specific configuration
++ */
++#define CONFIG_SUN4I          /* sun4i SoC generation */
++#define CONFIG_CLK_FULL_SPEED         1008000000
++
++#define CONFIG_SYS_PROMPT             "sun4i# "
++#define CONFIG_MACH_TYPE              4104
++
++/*
++ * Include common sunxi configuration where most the settings are
++ */
++#include <configs/sunxi-common.h>
++
++#endif /* __CONFIG_H */
+diff -ruN u-boot-2014.04/include/configs/sun5i.h u-boot-sunxi/include/configs/sun5i.h
+--- u-boot-2014.04/include/configs/sun5i.h     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/include/configs/sun5i.h       2014-09-06 16:58:36.461953107 +0200
+@@ -0,0 +1,25 @@
++/*
++ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
++ *
++ * Configuration settings for the Allwinner A13 (sun5i) CPU
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++/*
++ * High Level Configuration Options
++ */
++#define CONFIG_SUN5I          /* sun5i SoC generation */
++#define CONFIG_CLK_FULL_SPEED         1008000000
++
++#define CONFIG_SYS_PROMPT             "sun5i# "
++#define CONFIG_MACH_TYPE              4138
++
++/*
++ * Include common sunxi configuration where most the settings are
++ */
++#include <configs/sunxi-common.h>
++
++#endif /* __CONFIG_H */
+diff -ruN u-boot-2014.04/include/configs/sun6i.h u-boot-sunxi/include/configs/sun6i.h
+--- u-boot-2014.04/include/configs/sun6i.h     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/include/configs/sun6i.h       2014-09-06 16:58:36.461953107 +0200
+@@ -0,0 +1,43 @@
++/*
++ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
++ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
++ * (C) Copyright 2013 Maxime Ripard <maxime.ripard@free-electrons.com>
++ *
++ * Configuration settings for the Allwinner A31 (sun6i) CPU
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.        See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++/*
++ * A31 specific configuration
++ */
++#define CONFIG_SUN6I          /* sun6i SoC generation */
++
++#define CONFIG_SYS_PROMPT             "sun6i# "
++#define CONFIG_MACH_TYPE              3892
++
++/*
++ * Include common sunxi configuration where most the settings are
++ */
++#include <configs/sunxi-common.h>
++
++#endif /* __CONFIG_H */
+diff -ruN u-boot-2014.04/include/configs/sun7i.h u-boot-sunxi/include/configs/sun7i.h
+--- u-boot-2014.04/include/configs/sun7i.h     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/include/configs/sun7i.h       2014-09-06 16:58:36.461953107 +0200
+@@ -0,0 +1,30 @@
++/*
++ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
++ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
++ *
++ * Configuration settings for the Allwinner A20 (sun7i) CPU
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++/*
++ * A20 specific configuration
++ */
++#define CONFIG_SUN7I          /* sun7i SoC generation */
++#define CONFIG_CLK_FULL_SPEED         912000000
++
++#define CONFIG_SYS_PROMPT             "sun7i# "
++#define CONFIG_MACH_TYPE              4283
++
++#if defined(CONFIG_SYS_SECONDARY_ON)
++#define CONFIG_BOARD_POSTCLK_INIT 1
++#endif
++
++/*
++ * Include common sunxi configuration where most the settings are
++ */
++#include <configs/sunxi-common.h>
++
++#endif /* __CONFIG_H */
+diff -ruN u-boot-2014.04/include/configs/sun8i.h u-boot-sunxi/include/configs/sun8i.h
+--- u-boot-2014.04/include/configs/sun8i.h     1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/include/configs/sun8i.h       2014-09-06 16:58:36.461953107 +0200
+@@ -0,0 +1,28 @@
++/*
++ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
++ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
++ * (C) Copyright 2013 Maxime Ripard <maxime.ripard@free-electrons.com>
++ * (C) Copyright 2014 Chen-Yu Tsai <wens@csie.org>
++ *
++ * Configuration settings for the Allwinner A23 (sun8i) CPU
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++/*
++ * A23 specific configuration
++ */
++#define CONFIG_SUN8I          /* sun8i SoC generation */
++
++#define CONFIG_SYS_PROMPT             "sun8i# "
++#define CONFIG_MACH_TYPE              4137
++
++/*
++ * Include common sunxi configuration where most the settings are
++ */
++#include <configs/sunxi-common.h>
++
++#endif /* __CONFIG_H */
+diff -ruN u-boot-2014.04/include/configs/sunxi-common.h u-boot-sunxi/include/configs/sunxi-common.h
+--- u-boot-2014.04/include/configs/sunxi-common.h      1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/include/configs/sunxi-common.h        2014-09-06 16:58:36.461953107 +0200
+@@ -0,0 +1,427 @@
++/*
++ * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
++ *
++ * (C) Copyright 2007-2011
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * Configuration settings for the Allwinner sunxi series of boards.
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++
++#ifndef _SUNXI_COMMON_CONFIG_H
++#define _SUNXI_COMMON_CONFIG_H
++
++/*
++ * High Level Configuration Options
++ */
++#define CONFIG_SUNXI          /* sunxi family */
++#ifdef CONFIG_SPL_BUILD
++#ifndef CONFIG_SPL_FEL
++#define CONFIG_SYS_THUMB_BUILD        /* Thumbs mode to save space in SPL */
++#endif
++#endif
++
++#include <asm/arch/cpu.h>     /* get chip and board defs */
++
++#define CONFIG_SYS_TEXT_BASE          0x4a000000
++
++/*
++ * Display CPU and Board information
++ */
++#define CONFIG_DISPLAY_CPUINFO
++#define CONFIG_DISPLAY_BOARDINFO
++
++/* Serial & console */
++#define CONFIG_SYS_NS16550
++#define CONFIG_SYS_NS16550_SERIAL
++/* ns16550 reg in the low bits of cpu reg */
++#define CONFIG_SYS_NS16550_REG_SIZE   -4
++#define CONFIG_SYS_NS16550_CLK                24000000
++#define CONFIG_SYS_NS16550_COM1               SUNXI_UART0_BASE
++#define CONFIG_SYS_NS16550_COM2               SUNXI_UART1_BASE
++#define CONFIG_SYS_NS16550_COM3               SUNXI_UART2_BASE
++#define CONFIG_SYS_NS16550_COM4               SUNXI_UART3_BASE
++#define CONFIG_SYS_NS16550_COM5               SUNXI_R_UART_BASE
++
++/* DRAM Base */
++#define CONFIG_SYS_SDRAM_BASE         0x40000000
++#define CONFIG_SYS_INIT_RAM_ADDR      0x0
++#define CONFIG_SYS_INIT_RAM_SIZE      0x8000  /* 32 KiB */
++
++#define CONFIG_SYS_INIT_SP_OFFSET \
++      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
++#define CONFIG_SYS_INIT_SP_ADDR \
++      (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
++
++/* A10 has 1 banks of DRAM, we use only bank 1 in U-Boot */
++#define CONFIG_NR_DRAM_BANKS          1
++#define PHYS_SDRAM_0                  CONFIG_SYS_SDRAM_BASE
++#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN7I)
++#define PHYS_SDRAM_0_SIZE             0x80000000 /* 2 GiB */
++#else
++#define PHYS_SDRAM_0_SIZE             0x40000000 /* 1 GiB */
++#endif
++#if 0
++/* Nand config */
++#define CONFIG_NAND
++#define CONFIG_NAND_SUNXI
++#define CONFIG_CMD_NAND                         /* NAND support */
++#define CONFIG_SYS_MAX_NAND_DEVICE      1
++#define CONFIG_SYS_NAND_BASE            0x00
++#endif
++
++#define CONFIG_CMD_MEMORY
++#define CONFIG_CMD_SETEXPR
++
++#define CONFIG_SETUP_MEMORY_TAGS
++#define CONFIG_CMDLINE_TAG
++#define CONFIG_INITRD_TAG
++
++/* mmc config */
++/* Can't use MMC slot 0 if the UART is directed there */
++#if !defined CONFIG_UART0_PORT_F || CONFIG_MMC_SUNXI_SLOT != 0
++#define CONFIG_MMC
++#define CONFIG_GENERIC_MMC
++#define CONFIG_CMD_MMC
++#define CONFIG_MMC_SUNXI
++#ifndef CONFIG_MMC_SUNXI_SLOT
++#define CONFIG_MMC_SUNXI_SLOT         0
++#endif
++#define CONFIG_ENV_IS_IN_MMC
++#define CONFIG_SYS_MMC_ENV_DEV                0       /* first detected MMC controller */
++#endif
++
++/* 4MB of malloc() pool */
++#define CONFIG_SYS_MALLOC_LEN         (CONFIG_ENV_SIZE + (4 << 20))
++
++/*
++ * Miscellaneous configurable options
++ */
++#define CONFIG_CMD_ECHO
++#define CONFIG_SYS_CBSIZE     256     /* Console I/O Buffer Size */
++#define CONFIG_SYS_PBSIZE     384     /* Print Buffer Size */
++#define CONFIG_SYS_MAXARGS    16      /* max number of command args */
++#define CONFIG_SYS_GENERIC_BOARD
++
++/* Boot Argument Buffer Size */
++#define CONFIG_SYS_BARGSIZE           CONFIG_SYS_CBSIZE
++
++#define CONFIG_SYS_LOAD_ADDR          0x48000000 /* default load address */
++
++/* standalone support */
++#define CONFIG_STANDALONE_LOAD_ADDR   0x48000000
++
++#define CONFIG_SYS_HZ                 1000
++
++/* baudrate */
++#define CONFIG_BAUDRATE                       115200
++
++/* The stack sizes are set up in start.S using the settings below */
++#define CONFIG_STACKSIZE              (256 << 10)     /* 256 KiB */
++
++/* FLASH and environment organization */
++
++#define CONFIG_SYS_NO_FLASH
++
++#define CONFIG_SYS_MONITOR_LEN                (512 << 10)     /* 512 KiB */
++#define CONFIG_IDENT_STRING           " Allwinner Technology"
++
++#define CONFIG_ENV_OFFSET             (544 << 10) /* (8 + 24 + 512) KiB */
++#define CONFIG_ENV_SIZE                       (128 << 10)     /* 128 KiB */
++
++#ifdef CONFIG_SPL_FEL
++#define RUN_BOOT_RAM  "run boot_ram;"
++#else
++#define RUN_BOOT_RAM  ""
++#endif
++
++#define CONFIG_BOOTCOMMAND \
++      RUN_BOOT_RAM \
++      "if run loadbootenv; then " \
++        "echo Loaded environment from ${bootenv};" \
++        "env import -t ${scriptaddr} ${filesize};" \
++      "fi;" \
++      "if test -n \\\"${uenvcmd}\\\"; then " \
++        "echo Running uenvcmd ...;" \
++        "run uenvcmd;" \
++      "fi;" \
++      "if run loadbootscr; then "\
++        "echo Jumping to ${bootscr};" \
++        "source ${scriptaddr};" \
++      "fi;" \
++      "run autoboot;" \
++      ""
++
++#ifdef CONFIG_CMD_WATCHDOG
++#define       RESET_WATCHDOG "watchdog 0"
++#else
++#define RESET_WATCHDOG "true"
++#endif
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++      "bootm_size=0x10000000\0" \
++      "console=ttyS0,115200\0" \
++      "panicarg=panic=10\0" \
++      "extraargs=\0" \
++      "loglevel=8\0" \
++      "scriptaddr=0x44000000\0" \
++      "device=mmc\0" \
++      "partition=0:1\0" \
++      "setargs=" \
++        "if test -z \\\\\"$root\\\\\"; then"\
++          " if test \\\\\"$bootpath\\\\\" = \"/boot/\"; then"\
++            " root=\"/dev/mmcblk0p1 rootwait\";"\
++          " else" \
++            " root=\"/dev/mmcblk0p2 rootwait\";"\
++          " fi;"\
++        " fi;"\
++        " setenv bootargs console=${console} root=${root}" \
++        " loglevel=${loglevel} ${panicarg} ${extraargs}" \
++        "\0" \
++      "kernel=uImage\0" \
++      "bootenv=uEnv.txt\0" \
++      "bootscr=boot.scr\0" \
++      "script=script.bin\0" \
++      "loadbootscr=" \
++        "fatload $device $partition $scriptaddr ${bootscr}" \
++        " || " \
++        "ext2load $device $partition $scriptaddr boot/${bootscr}" \
++        " ||" \
++        "ext2load $device $partition $scriptaddr ${bootscr}" \
++        "\0" \
++      "loadbootenv=" \
++        "fatload $device $partition $scriptaddr ${bootenv}" \
++        " || " \
++        "ext2load $device $partition $scriptaddr boot/${bootenv}" \
++        " || " \
++        "ext2load $device $partition $scriptaddr ${bootenv}" \
++        "\0" \
++      "loadkernel=" \
++        "if "\
++          "bootpath=/boot/" \
++          " && " \
++          "ext2load $device $partition 0x43000000 ${bootpath}${script}" \
++          " && " \
++          "ext2load $device $partition 0x48000000 ${bootpath}${kernel}" \
++        ";then true; elif " \
++          "bootpath=/" \
++          " && " \
++          "fatload $device $partition 0x43000000 ${script}" \
++          " && " \
++          "fatload $device $partition 0x48000000 ${kernel}" \
++        ";then true; elif " \
++          "bootpath=/" \
++          " && " \
++          "ext2load $device $partition 0x43000000 ${bootpath}${script}" \
++          " && " \
++          "ext2load $device $partition 0x48000000 ${bootpath}${kernel}" \
++        ";then true; else "\
++          "false" \
++        ";fi" \
++        "\0" \
++      "autoboot=" \
++        "run loadkernel" \
++        " && " \
++        "run setargs" \
++        " && " \
++        RESET_WATCHDOG \
++        " && " \
++        "bootm 0x48000000" \
++        "\0" \
++      "boot_ram=" \
++        "saved_stdout=$stdout;setenv stdout nc;"\
++        "if iminfo 0x41000000; then" \
++          " " RESET_WATCHDOG ";"\
++          " setenv stdout $saved_stdout;" \
++          " source 0x41000000;" \
++        "else" \
++          " setenv stdout $saved_stdout;" \
++        "fi" \
++        "\0" \
++      ""
++
++#define CONFIG_SYS_BOOT_GET_CMDLINE
++
++#include <config_cmd_default.h>
++
++#define CONFIG_FAT_WRITE      /* enable write access */
++
++#define CONFIG_SPL_FRAMEWORK
++#define CONFIG_SPL_LIBCOMMON_SUPPORT
++#define CONFIG_SPL_SERIAL_SUPPORT
++#define CONFIG_SPL_LIBGENERIC_SUPPORT
++#define CONFIG_SPL_DISPLAY_PRINT
++
++/* Falcon boot mode support */
++/* Disabled by default on sun4i/sun7i. Many GCC versions produces a too
++ * large SPL for A10/A20 with this on. sun5i however accepts a much larger
++ * SPL
++ */
++#if defined( CONFIG_SUN5I ) || defined ( CONFIG_SYS_THUMB_BUILD )
++#define CONFIG_SPL_OS_BOOT
++#endif
++
++#ifdef CONFIG_SPL_FEL
++
++#define CONFIG_SPL
++#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds"
++#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7/sunxi"
++#define CONFIG_SPL_TEXT_BASE          0x2000
++#define CONFIG_SPL_MAX_SIZE           0x4000          /* 16 KiB */
++
++#else /* CONFIG_SPL */
++
++#define CONFIG_SPL_BSS_START_ADDR     0x4ff80000
++#define CONFIG_SPL_BSS_MAX_SIZE               0x80000         /* 512 KiB */
++
++#define CONFIG_SPL_TEXT_BASE          0x20            /* sram start+header */
++#ifdef CONFIG_SUN5I
++#define CONFIG_SPL_MAX_SIZE           0x75e0          /* 7748+ is used */
++#else
++#define CONFIG_SPL_MAX_SIZE           0x5fe0          /* 24KB on sun4i/sun7i */
++#endif
++
++#define CONFIG_SPL_LIBDISK_SUPPORT
++#define CONFIG_SPL_MMC_SUPPORT
++
++#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
++
++#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR       80      /* 40KiB */
++#define CONFIG_SPL_PAD_TO             32768           /* decimal for 'dd' */
++
++#endif /* CONFIG_SPL */
++/* end of 32 KiB in sram */
++#define LOW_LEVEL_SRAM_STACK          0x00008000 /* End of sram */
++#define CONFIG_SPL_STACK              LOW_LEVEL_SRAM_STACK
++#define CONFIG_SYS_SPL_MALLOC_START   0x4ff00000
++#define CONFIG_SYS_SPL_MALLOC_SIZE    0x00080000      /* 512 KiB */
++
++#ifdef CONFIG_SPL_OS_BOOT
++#define CONFIG_CMD_SPL
++#define CONFIG_SYS_SPL_ARGS_ADDR              (PHYS_SDRAM_0 + 0x100)
++#ifdef CONFIG_SPL_MMC_SUPPORT
++#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 1344
++#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  256
++#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 1600
++#endif
++#endif
++
++#undef CONFIG_CMD_FPGA
++#undef CONFIG_CMD_NET
++#undef CONFIG_CMD_NFS
++
++/* I2C */
++#if !defined CONFIG_SUN6I && !defined CONFIG_SUN8I
++#define CONFIG_SPL_I2C_SUPPORT
++#endif
++/* No CONFIG_SYS_I2C as we use the non converted mvtwsi driver */
++#define CONFIG_HARD_I2C
++#define CONFIG_SYS_I2C_SUNXI
++#define CONFIG_SYS_I2C_SPEED          400000
++#define CONFIG_SYS_I2C_SLAVE          0x7f
++#define CONFIG_CMD_I2C
++
++/* Watchdog */
++#if 0
++#define CONFIG_WATCHDOG                       /* automatic watchdog support */
++#define CONFIG_CMD_WATCHDOG           /* watchdog command setting the watchdog timeout */
++#endif
++
++/* GPIO */
++#define CONFIG_SUNXI_GPIO
++#define CONFIG_CMD_GPIO
++
++/* PMU */
++#if !defined CONFIG_AXP152_POWER && !defined CONFIG_AXP221_POWER && !defined CONFIG_NO_AXP
++#define CONFIG_AXP209_POWER
++#endif
++#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER
++#define CONFIG_SPL_POWER_SUPPORT
++#endif
++
++#ifdef CONFIG_STATUSLED
++#define STATUS_LED_BIT CONFIG_STATUSLED
++#endif
++#ifdef CONFIG_STATUSLED1
++#define STATUS_LED_BIT1 CONFIG_STATUSLED1
++#endif
++#ifdef CONFIG_STATUSLED2
++#define STATUS_LED_BIT2 CONFIG_STATUSLED2
++#endif
++#ifdef CONFIG_STATUSLED3
++#define STATUS_LED_BIT3 CONFIG_STATUSLED3
++#endif
++
++#ifndef CONFIG_SPL_BUILD
++#ifdef STATUS_LED_BIT
++#define CONFIG_GPIO_LED
++#define CONFIG_STATUS_LED
++#ifndef STATUS_LED_BOOT
++#define STATUS_LED_BOOT 0
++#endif
++#ifndef STATUS_LED_STATE
++#define STATUS_LED_STATE STATUS_LED_ON
++#define STATUS_LED_PERIOD 1
++#endif
++#ifndef STATUS_LED_STATE1
++#define STATUS_LED_STATE1 STATUS_LED_OFF
++#define STATUS_LED_PERIOD1 1
++#endif
++#ifndef STATUS_LED_STATE2
++#define STATUS_LED_STATE2 STATUS_LED_OFF
++#define STATUS_LED_PERIOD2 1
++#endif
++#ifndef STATUS_LED_STATE3
++#define STATUS_LED_STATE3 STATUS_LED_OFF
++#define STATUS_LED_PERIOD3 1
++#endif
++#define CONFIG_BOARD_SPECIFIC_LED
++#define CONFIG_CMD_LED
++#endif
++#endif
++
++/* Define this to have serial channel 1 (UART0) redirected to SD port */
++/* #define CONFIG_UART0_PORT_F */
++
++#ifndef CONFIG_CONS_INDEX
++#define CONFIG_CONS_INDEX              1       /* UART0 */
++#endif
++
++/* Ethernet support */
++#ifdef CONFIG_SUNXI_EMAC
++#define CONFIG_MII                    /* MII PHY management           */
++#endif
++
++#ifdef CONFIG_SUNXI_GMAC
++#define CONFIG_DESIGNWARE_ETH         /* GMAC can use designware driver */
++#define CONFIG_DW_AUTONEG
++#define CONFIG_PHY_GIGE                       /* GMAC can use gigabit PHY     */
++#define CONFIG_PHY_ADDR               1
++#define CONFIG_MII                    /* MII PHY management           */
++#define CONFIG_PHYLIB
++#endif
++
++#ifdef CONFIG_CMD_NET
++#define CONFIG_CMD_NFS
++#define CONFIG_CMD_DNS
++#define CONFIG_NETCONSOLE
++#define CONFIG_BOOTP_DNS2
++#define CONFIG_BOOTP_SEND_HOSTNAME
++#endif
++
++#if !defined CONFIG_ENV_IS_IN_MMC && \
++    !defined CONFIG_ENV_IS_IN_NAND && \
++    !defined CONFIG_ENV_IS_IN_FAT && \
++    !defined CONFIG_ENV_IS_IN_SPI_FLASH
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_MISC_INIT_R
++
++#ifndef CONFIG_SPL_BUILD
++#include <config_distro_defaults.h>
++#endif
++
++#endif /* _SUNXI_COMMON_CONFIG_H */
+diff -ruN u-boot-2014.04/include/netdev.h u-boot-sunxi/include/netdev.h
+--- u-boot-2014.04/include/netdev.h    2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/include/netdev.h      2014-09-06 16:58:36.485953106 +0200
+@@ -79,7 +79,8 @@
+ int skge_initialize(bd_t *bis);
+ int smc91111_initialize(u8 dev_num, int base_addr);
+ int smc911x_initialize(u8 dev_num, int base_addr);
+-int sunxi_wemac_initialize(bd_t *bis);
++int sunxi_emac_initialize(bd_t *bis);
++int sunxi_gmac_initialize(bd_t *bis);
+ int tsi108_eth_initialize(bd_t *bis);
+ int uec_standard_init(bd_t *bis);
+ int uli526x_initialize(bd_t *bis);
+diff -ruN u-boot-2014.04/Makefile u-boot-sunxi/Makefile
+--- u-boot-2014.04/Makefile    2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/Makefile      2014-09-06 16:58:35.065953148 +0200
+@@ -870,6 +870,13 @@
+ u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
+       $(call if_changed,pad_cat)
+ 
++ifneq ($(CONFIG_SUNXI),)
++OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
++                                 --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
++u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
++      $(call if_changed,pad_cat)
++endif
++
+ ifneq ($(CONFIG_TEGRA),)
+ OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
+ u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
+@@ -1081,6 +1088,9 @@
+ spl/u-boot-spl: tools prepare
+       $(Q)$(MAKE) obj=spl -f $(srctree)/spl/Makefile all
+ 
++spl/sunxi-spl.bin: spl/u-boot-spl
++      @:
++
+ tpl/u-boot-tpl.bin: tools prepare
+       $(Q)$(MAKE) obj=tpl -f $(srctree)/spl/Makefile all CONFIG_TPL_BUILD=y
+ 
+diff -ruN u-boot-2014.04/mkconfig u-boot-sunxi/mkconfig
+--- u-boot-2014.04/mkconfig    2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/mkconfig      2014-09-06 16:58:36.509953105 +0200
+@@ -174,6 +174,7 @@
+ echo "#define CONFIG_SYS_ARCH  \"${arch}\""  >> config.h
+ echo "#define CONFIG_SYS_CPU   \"${cpu}\""   >> config.h
+ echo "#define CONFIG_SYS_BOARD \"${board}\"" >> config.h
++echo "#define CONFIG_SYS_TARGET \"${BOARD_NAME}\"" >> config.h
+ 
+ [ "${vendor}" ] && echo "#define CONFIG_SYS_VENDOR \"${vendor}\"" >> config.h
+ 
+diff -ruN u-boot-2014.04/snapshot.commit u-boot-sunxi/snapshot.commit
+--- u-boot-2014.04/snapshot.commit     2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/snapshot.commit       2014-09-06 16:58:36.521953105 +0200
+@@ -1 +1 @@
+-dda0dbfc69f3d560c87f5be85f127ed862ea6721  Mon, 14 Apr 2014 15:19:24 -0400
++$Format:%H  %cD$
+diff -ruN u-boot-2014.04/spl/Makefile u-boot-sunxi/spl/Makefile
+--- u-boot-2014.04/spl/Makefile        2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/spl/Makefile  2014-09-06 16:58:36.521953105 +0200
+@@ -188,6 +188,12 @@
+ ALL-y += $(obj)/$(BOARD)-spl.bin
+ endif
+ 
++ifdef CONFIG_SUNXI
++ifndef CONFIG_SPL_FEL
++ALL-y += $(obj)/sunxi-spl.bin
++endif
++endif
++
+ all:  $(ALL-y)
+ 
+ ifdef CONFIG_SAMSUNG
+@@ -215,6 +221,13 @@
+ LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE)
+ endif
+ 
++ifdef CONFIG_SUNXI
++quiet_cmd_mksunxiboot = MKSUNXI $@
++cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@
++$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin
++      $(call if_changed,mksunxiboot)
++endif
++
+ quiet_cmd_u-boot-spl = LD      $@
+       cmd_u-boot-spl = cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
+                      $(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \
+diff -ruN u-boot-2014.04/tools/.gitignore u-boot-sunxi/tools/.gitignore
+--- u-boot-2014.04/tools/.gitignore    2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/tools/.gitignore      2014-09-06 16:58:36.521953105 +0200
+@@ -9,6 +9,7 @@
+ /mkexynosspl
+ /mpc86x_clk
+ /mxsboot
++/mksunxiboot
+ /ncb
+ /proftool
+ /relocate-rela
+diff -ruN u-boot-2014.04/tools/Makefile u-boot-sunxi/tools/Makefile
+--- u-boot-2014.04/tools/Makefile      2014-04-14 21:19:24.000000000 +0200
++++ u-boot-sunxi/tools/Makefile        2014-09-06 16:58:36.521953105 +0200
+@@ -120,6 +120,8 @@
+ hostprogs-$(CONFIG_MX28) += mxsboot$(SFX)
+ HOSTCFLAGS_mxsboot$(SFX).o := -pedantic
+ 
++hostprogs-$(CONFIG_SUNXI) += mksunxiboot$(SFX)
++
+ hostprogs-$(CONFIG_NETCONSOLE) += ncb$(SFX)
+ hostprogs-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1$(SFX)
+ 
+diff -ruN u-boot-2014.04/tools/mksunxiboot.c u-boot-sunxi/tools/mksunxiboot.c
+--- u-boot-2014.04/tools/mksunxiboot.c 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/tools/mksunxiboot.c   2014-09-06 16:58:36.529953105 +0200
+@@ -0,0 +1,140 @@
++/*
++ * (C) Copyright 2007-2011
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Tom Cubie <tangliang@allwinnertech.com>
++ *
++ * a simple tool to generate bootable image for sunxi platform.
++ *
++ * SPDX-License-Identifier:   GPL-2.0+
++ */
++#include <fcntl.h>
++#include <stdio.h>
++#include <unistd.h>
++#include <stdlib.h>
++#include <string.h>
++#include <errno.h>
++#include <sys/types.h>
++#include <sys/stat.h>
++
++/* boot head definition from sun4i boot code */
++struct boot_file_head {
++      uint32_t b_instruction; /* one intruction jumping to real code */
++      uint8_t magic[8];       /* ="eGON.BT0" or "eGON.BT1", not C-style str */
++      uint32_t check_sum;     /* generated by PC */
++      uint32_t length;        /* generated by PC */
++      /*
++       * We use a simplified header, only filling in what is needed
++       * by the boot ROM. To be compatible with Allwinner tools we
++       * would need to implement the proper fields here instead of
++       * padding.
++       */
++      uint8_t pad[12];                /* align to 32 bytes */
++};
++
++#define BOOT0_MAGIC                     "eGON.BT0"
++#define STAMP_VALUE                     0x5F0A6C39
++
++/* check sum functon from sun4i boot code */
++int gen_check_sum(struct boot_file_head *head_p)
++{
++      uint32_t length;
++      uint32_t *buf;
++      uint32_t loop;
++      uint32_t i;
++      uint32_t sum;
++
++      length = head_p->length;
++      if ((length & 0x3) != 0)        /* must 4-byte-aligned */
++              return -1;
++      buf = (uint32_t *)head_p;
++      head_p->check_sum = STAMP_VALUE;        /* fill stamp */
++      loop = length >> 2;
++
++      /* calculate the sum */
++      for (i = 0, sum = 0; i < loop; i++)
++              sum += buf[i];
++
++      /* write back check sum */
++      head_p->check_sum = sum;
++
++      return 0;
++}
++
++#define ALIGN(x, a) __ALIGN_MASK((x), (typeof(x))(a)-1)
++#define __ALIGN_MASK(x, mask) (((x)+(mask))&~(mask))
++
++#define SUN4I_SRAM_SIZE 0x7600        /* 0x7748+ is used by BROM */
++#define SRAM_LOAD_MAX_SIZE (SUN4I_SRAM_SIZE - sizeof(struct boot_file_head))
++#define BLOCK_SIZE 512
++
++struct boot_img {
++      struct boot_file_head header;
++      char code[SRAM_LOAD_MAX_SIZE];
++      char pad[BLOCK_SIZE];
++};
++
++int main(int argc, char *argv[])
++{
++      int fd_in, fd_out;
++      struct boot_img img;
++      unsigned file_size;
++      int count;
++
++      if (argc < 2) {
++              printf("\tThis program makes an input bin file to sun4i " \
++                     "bootable image.\n" \
++                     "\tUsage: %s input_file out_putfile\n", argv[0]);
++              return EXIT_FAILURE;
++      }
++
++      fd_in = open(argv[1], O_RDONLY);
++      if (fd_in < 0) {
++              perror("Open input file");
++              return EXIT_FAILURE;
++      }
++
++      memset(img.pad, 0, BLOCK_SIZE);
++
++      /* get input file size */
++      file_size = lseek(fd_in, 0, SEEK_END);
++
++      if (file_size > SRAM_LOAD_MAX_SIZE) {
++              fprintf(stderr, "ERROR: File too large!\n");
++              return EXIT_FAILURE;
++      }
++
++      fd_out = open(argv[2], O_WRONLY | O_CREAT, 0666);
++      if (fd_out < 0) {
++              perror("Open output file");
++              return EXIT_FAILURE;
++      }
++
++      /* read file to buffer to calculate checksum */
++      lseek(fd_in, 0, SEEK_SET);
++      count = read(fd_in, img.code, file_size);
++      if (count != file_size) {
++              perror("Reading input image");
++              return EXIT_FAILURE;
++      }
++
++      /* fill the header */
++      img.header.b_instruction =      /* b instruction */
++              0xEA000000 |    /* jump to the first instr after the header */
++              ((sizeof(struct boot_file_head) / sizeof(int) - 2)
++               & 0x00FFFFFF);
++      memcpy(img.header.magic, BOOT0_MAGIC, 8);       /* no '0' termination */
++      img.header.length =
++              ALIGN(file_size + sizeof(struct boot_file_head), BLOCK_SIZE);
++      gen_check_sum(&img.header);
++
++      count = write(fd_out, &img, img.header.length);
++      if (count != img.header.length) {
++              perror("Writing output");
++              return EXIT_FAILURE;
++      }
++
++      close(fd_in);
++      close(fd_out);
++
++      return EXIT_SUCCESS;
++}
+diff -ruN u-boot-2014.04/tools/mksunxiboot.README u-boot-sunxi/tools/mksunxiboot.README
+--- u-boot-2014.04/tools/mksunxiboot.README    1970-01-01 01:00:00.000000000 +0100
++++ u-boot-sunxi/tools/mksunxiboot.README      2014-09-06 16:58:36.529953105 +0200
+@@ -0,0 +1,13 @@
++This program make a arm binary file can be loaded by Allwinner A10 and related
++chips from storage media such as nand and mmc.
++
++More information about A10 boot, please refer to
++http://rhombus-tech.net/allwinner_a10/a10_boot_process/
++
++To compile this program, just type make, you will get 'mksunxiboot'.
++
++To use it,
++$./mksunxiboot u-boot.bin u-boot-mmc.bin
++then you can write it to a mmc card with dd.
++$sudo dd if=u-boot-mmc.bin of=/dev/sdb bs=1024 seek=8
++then insert your mmc card to your A10 tablet, you can boot from mmc card.

diff --git a/src/patches/u-boot/sunxi/002-uboot-jwrdegoede-psci-support.patch b/src/patches/u-boot/sunxi/002-uboot-jwrdegoede-psci-support.patch
new file mode 100644 (file)
index 0000000..65407aa
--- /dev/null
+++ b/src/patches/u-boot/sunxi/002-uboot-jwrdegoede-psci-support.patch
@@ -0,0 +1,1495 @@
+From 86f31982ac62e80fe586cad2e0a49a7b22e3d4ee Mon Sep 17 00:00:00 2001
+From: Marc Zyngier <marc.zyngier@arm.com>
+Date: Sat, 7 Dec 2013 11:19:07 +0000
+Subject: [PATCH] ARM: HYP/non-sec: move switch to non-sec to the last boot
+ phase
+
+Having the switch to non-secure in the "prep" phase is causing
+all kind of troubles, as that stage can be called multiple times.
+
+Instead, move the switch to non-secure to the last possible phase,
+when there is no turning back anymore.
+
+Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
+---
+ arch/arm/lib/bootm.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
+index 47ee070..10634a4 100644
+--- a/arch/arm/lib/bootm.c
++++ b/arch/arm/lib/bootm.c
+@@ -242,7 +242,6 @@ static void boot_prep_linux(bootm_headers_t *images)
+               printf("FDT and ATAGS support not compiled in - hanging\n");
+               hang();
+       }
+-      do_nonsec_virt_switch();
+ }
+ 
+ /* Subcommand: GO */
+@@ -287,8 +286,10 @@ static void boot_jump_linux(bootm_headers_t *images, int flag)
+       else
+               r2 = gd->bd->bi_boot_params;
+ 
+-      if (!fake)
++      if (!fake) {
++              do_nonsec_virt_switch();
+               kernel_entry(0, machid, r2);
++      }
+ #endif
+ }
+ 
+From c26d288f6cbc6d53219001d42476f314c403257b Mon Sep 17 00:00:00 2001
+From: Marc Zyngier <marc.zyngier@arm.com>
+Date: Sat, 7 Dec 2013 11:19:08 +0000
+Subject: [PATCH] ARM: HYP/non-sec: add a barrier after setting SCR.NS==1
+
+A CP15 instruction execution can be reordered, requiring an
+isb to be sure it is executed in program order.
+
+Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
+---
+ arch/arm/cpu/armv7/nonsec_virt.S | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S
+index 6367e09..12de5c2 100644
+--- a/arch/arm/cpu/armv7/nonsec_virt.S
++++ b/arch/arm/cpu/armv7/nonsec_virt.S
+@@ -46,6 +46,7 @@ _secure_monitor:
+ #endif
+ 
+       mcr     p15, 0, r1, c1, c1, 0           @ write SCR (with NS bit set)
++      isb
+ 
+ #ifdef CONFIG_ARMV7_VIRT
+       mrceq   p15, 0, r0, c12, c0, 1          @ get MVBAR value
+From 06feeea3c84cc58ff3d5c19f6a430886495f86ce Mon Sep 17 00:00:00 2001
+From: Marc Zyngier <marc.zyngier@arm.com>
+Date: Sat, 7 Dec 2013 11:19:09 +0000
+Subject: [PATCH] ARM: non-sec: reset CNTVOFF to zero
+
+Before switching to non-secure, make sure that CNTVOFF is set
+to zero on all CPUs. Otherwise, kernel running in non-secure
+without HYP enabled (hence using virtual timers) may observe
+timers that are not synchronized, effectively seeing time
+going backward...
+
+Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
+---
+ arch/arm/cpu/armv7/nonsec_virt.S | 9 ++++++++-
+ 1 file changed, 8 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S
+index 12de5c2..b5c946f 100644
+--- a/arch/arm/cpu/armv7/nonsec_virt.S
++++ b/arch/arm/cpu/armv7/nonsec_virt.S
+@@ -38,10 +38,10 @@ _secure_monitor:
+       bic     r1, r1, #0x4e                   @ clear IRQ, FIQ, EA, nET bits
+       orr     r1, r1, #0x31                   @ enable NS, AW, FW bits
+ 
+-#ifdef CONFIG_ARMV7_VIRT
+       mrc     p15, 0, r0, c0, c1, 1           @ read ID_PFR1
+       and     r0, r0, #CPUID_ARM_VIRT_MASK    @ mask virtualization bits
+       cmp     r0, #(1 << CPUID_ARM_VIRT_SHIFT)
++#ifdef CONFIG_ARMV7_VIRT
+       orreq   r1, r1, #0x100                  @ allow HVC instruction
+ #endif
+ 
+@@ -52,7 +52,14 @@ _secure_monitor:
+       mrceq   p15, 0, r0, c12, c0, 1          @ get MVBAR value
+       mcreq   p15, 4, r0, c12, c0, 0          @ write HVBAR
+ #endif
++      bne     1f
+ 
++      @ Reset CNTVOFF to 0 before leaving monitor mode
++      mrc     p15, 0, r0, c0, c1, 1           @ read ID_PFR1
++      ands    r0, r0, #CPUID_ARM_GENTIMER_MASK        @ test arch timer bits
++      movne   r0, #0
++      mcrrne  p15, 4, r0, r0, c14             @ Reset CNTVOFF to zero
++1:
+       movs    pc, lr                          @ return to non-secure SVC
+ 
+ _hyp_trap:
+From 054bcf5147ff5a20298bce5b3bdfbf3e1c797594 Mon Sep 17 00:00:00 2001
+From: Marc Zyngier <marc.zyngier@arm.com>
+Date: Sat, 7 Dec 2013 11:19:10 +0000
+Subject: [PATCH] ARM: add missing HYP mode constant
+
+In order to be able to use the various mode constants (far more
+readable than random hex values), add the missing HYP and A
+values.
+
+Also update arm/lib/interrupts.c to display HYP instead of an
+unknown value.
+
+Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
+---
+ arch/arm/include/asm/proc-armv/ptrace.h | 2 ++
+ arch/arm/lib/interrupts.c               | 2 +-
+ 2 files changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/include/asm/proc-armv/ptrace.h b/arch/arm/include/asm/proc-armv/ptrace.h
+index 21aef58..71df5a9 100644
+--- a/arch/arm/include/asm/proc-armv/ptrace.h
++++ b/arch/arm/include/asm/proc-armv/ptrace.h
+@@ -38,12 +38,14 @@ struct pt_regs {
+ #define IRQ_MODE      0x12
+ #define SVC_MODE      0x13
+ #define ABT_MODE      0x17
++#define HYP_MODE      0x1a
+ #define UND_MODE      0x1b
+ #define SYSTEM_MODE   0x1f
+ #define MODE_MASK     0x1f
+ #define T_BIT         0x20
+ #define F_BIT         0x40
+ #define I_BIT         0x80
++#define A_BIT         0x100
+ #define CC_V_BIT      (1 << 28)
+ #define CC_C_BIT      (1 << 29)
+ #define CC_Z_BIT      (1 << 30)
+diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c
+index 758b013..f6b7c03 100644
+--- a/arch/arm/lib/interrupts.c
++++ b/arch/arm/lib/interrupts.c
+@@ -103,7 +103,7 @@ void show_regs (struct pt_regs *regs)
+       "UK12_26",      "UK13_26",      "UK14_26",      "UK15_26",
+       "USER_32",      "FIQ_32",       "IRQ_32",       "SVC_32",
+       "UK4_32",       "UK5_32",       "UK6_32",       "ABT_32",
+-      "UK8_32",       "UK9_32",       "UK10_32",      "UND_32",
++      "UK8_32",       "UK9_32",       "HYP_32",       "UND_32",
+       "UK12_32",      "UK13_32",      "UK14_32",      "SYS_32",
+       };
+ 
+From 213a8d9b7e613210d3c7d8b99c95b454ad0527d8 Mon Sep 17 00:00:00 2001
+From: Marc Zyngier <marc.zyngier@arm.com>
+Date: Sat, 7 Dec 2013 11:19:11 +0000
+Subject: [PATCH] ARM: HYP/non-sec: add separate section for secure code
+
+In anticipation of refactoring the HYP/non-secure code to run
+from secure RAM, add a new linker section that will contain that
+code.
+
+Nothing is using it just yet.
+
+Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
+---
+ arch/arm/config.mk      |  2 +-
+ arch/arm/cpu/u-boot.lds | 30 ++++++++++++++++++++++++++++++
+ arch/arm/lib/sections.c |  2 ++
+ 3 files changed, 33 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/config.mk b/arch/arm/config.mk
+index 66ecc2e..2bdfca5 100644
+--- a/arch/arm/config.mk
++++ b/arch/arm/config.mk
+@@ -113,7 +113,7 @@ endif
+ ifdef CONFIG_ARM64
+ OBJCOPYFLAGS += -j .text -j .rodata -j .data -j .u_boot_list -j .rela.dyn
+ else
+-OBJCOPYFLAGS += -j .text -j .rodata -j .hash -j .data -j .got.plt -j .u_boot_list -j .rel.dyn
++OBJCOPYFLAGS += -j .text -j .secure_text -j .rodata -j .hash -j .data -j .got.plt -j .u_boot_list -j .rel.dyn
+ endif
+ 
+ ifneq ($(CONFIG_IMX_CONFIG),)
+diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds
+index 33c1f99..f45885d 100644
+--- a/arch/arm/cpu/u-boot.lds
++++ b/arch/arm/cpu/u-boot.lds
+@@ -7,6 +7,8 @@
+  * SPDX-License-Identifier:   GPL-2.0+
+  */
+ 
++#include <config.h>
++
+ OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+ OUTPUT_ARCH(arm)
+ ENTRY(_start)
+@@ -22,6 +24,34 @@ SECTIONS
+               *(.text*)
+       }
+ 
++#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT) || defined(CONFIG_ARMV7_PSCI)
++
++#ifndef CONFIG_ARMV7_SECURE_BASE
++#define CONFIG_ARMV7_SECURE_BASE
++#endif
++
++      .__secure_start : {
++              . = ALIGN(0x1000);
++              *(.__secure_start)
++      }
++
++      .secure_text CONFIG_ARMV7_SECURE_BASE :
++              AT(ADDR(.__secure_start) + SIZEOF(.__secure_start))
++      {
++              *(._secure.text)
++      }
++
++      . = LOADADDR(.__secure_start) +
++              SIZEOF(.__secure_start) +
++              SIZEOF(.secure_text);
++
++      __secure_end_lma = .;
++      .__secure_end : AT(__secure_end_lma) {
++              *(.__secure_end)
++              LONG(0x1d1071c);        /* Must output something to reset LMA */
++      }
++#endif
++
+       . = ALIGN(4);
+       .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+ 
+diff --git a/arch/arm/lib/sections.c b/arch/arm/lib/sections.c
+index 5b30bcb..a1205c3 100644
+--- a/arch/arm/lib/sections.c
++++ b/arch/arm/lib/sections.c
+@@ -25,4 +25,6 @@ char __image_copy_start[0] __attribute__((section(".__image_copy_start")));
+ char __image_copy_end[0] __attribute__((section(".__image_copy_end")));
+ char __rel_dyn_start[0] __attribute__((section(".__rel_dyn_start")));
+ char __rel_dyn_end[0] __attribute__((section(".__rel_dyn_end")));
++char __secure_start[0] __attribute__((section(".__secure_start")));
++char __secure_end[0] __attribute__((section(".__secure_end")));
+ char _end[0] __attribute__((section(".__end")));
+From d7ebd8f57e84ea92ef0cf55080f0acec9c6d1ace Mon Sep 17 00:00:00 2001
+From: Marc Zyngier <marc.zyngier@arm.com>
+Date: Sat, 7 Dec 2013 11:19:12 +0000
+Subject: [PATCH] ARM: HYP/non-sec: allow relocation to secure RAM
+
+The current non-sec switching code suffers from one major issue:
+it cannot run in secure RAM, as a large part of u-boot still needs
+to be run while we're switched to non-secure.
+
+This patch reworks the whole HYP/non-secure strategy by:
+- making sure the secure code is the *last* thing u-boot executes
+  before entering the payload
+- performing an exception return from secure mode directly into
+  the payload
+- allowing the code to be dynamically relocated to secure RAM
+  before switching to non-secure.
+
+This involves quite a bit of horrible code, specially as u-boot
+relocation is quite primitive.
+
+Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
+---
+ arch/arm/cpu/armv7/nonsec_virt.S | 161 +++++++++++++++++++--------------------
+ arch/arm/cpu/armv7/virt-v7.c     |  59 +++++---------
+ arch/arm/include/asm/armv7.h     |  10 ++-
+ arch/arm/include/asm/secure.h    |  26 +++++++
+ arch/arm/lib/bootm.c             |  22 +++---
+ 5 files changed, 138 insertions(+), 140 deletions(-)
+ create mode 100644 arch/arm/include/asm/secure.h
+
+diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S
+index b5c946f..2a43e3c 100644
+--- a/arch/arm/cpu/armv7/nonsec_virt.S
++++ b/arch/arm/cpu/armv7/nonsec_virt.S
+@@ -10,10 +10,13 @@
+ #include <linux/linkage.h>
+ #include <asm/gic.h>
+ #include <asm/armv7.h>
++#include <asm/proc-armv/ptrace.h>
+ 
+ .arch_extension sec
+ .arch_extension virt
+ 
++      .pushsection ._secure.text, "ax"
++
+       .align  5
+ /* the vector table for secure state and HYP mode */
+ _monitor_vectors:
+@@ -22,51 +25,86 @@ _monitor_vectors:
+       adr pc, _secure_monitor
+       .word 0
+       .word 0
+-      adr pc, _hyp_trap
++      .word 0
+       .word 0
+       .word 0
+ 
++.macro is_cpu_virt_capable    tmp
++      mrc     p15, 0, \tmp, c0, c1, 1         @ read ID_PFR1
++      and     \tmp, \tmp, #CPUID_ARM_VIRT_MASK        @ mask virtualization bits
++      cmp     \tmp, #(1 << CPUID_ARM_VIRT_SHIFT)
++.endm
++
+ /*
+  * secure monitor handler
+  * U-boot calls this "software interrupt" in start.S
+  * This is executed on a "smc" instruction, we use a "smc #0" to switch
+  * to non-secure state.
+- * We use only r0 and r1 here, due to constraints in the caller.
++ * r0, r1, r2: passed to the callee
++ * ip: target PC
+  */
+ _secure_monitor:
+-      mrc     p15, 0, r1, c1, c1, 0           @ read SCR
+-      bic     r1, r1, #0x4e                   @ clear IRQ, FIQ, EA, nET bits
+-      orr     r1, r1, #0x31                   @ enable NS, AW, FW bits
++      mrc     p15, 0, r5, c1, c1, 0           @ read SCR
++      bic     r5, r5, #0x4e                   @ clear IRQ, FIQ, EA, nET bits
++      orr     r5, r5, #0x31                   @ enable NS, AW, FW bits
+ 
+-      mrc     p15, 0, r0, c0, c1, 1           @ read ID_PFR1
+-      and     r0, r0, #CPUID_ARM_VIRT_MASK    @ mask virtualization bits
+-      cmp     r0, #(1 << CPUID_ARM_VIRT_SHIFT)
++      mov     r6, #SVC_MODE                   @ default mode is SVC
++      is_cpu_virt_capable r4
+ #ifdef CONFIG_ARMV7_VIRT
+-      orreq   r1, r1, #0x100                  @ allow HVC instruction
++      orreq   r5, r5, #0x100                  @ allow HVC instruction
++      moveq   r6, #HYP_MODE                   @ Enter the kernel as HYP
+ #endif
+ 
+-      mcr     p15, 0, r1, c1, c1, 0           @ write SCR (with NS bit set)
++      mcr     p15, 0, r5, c1, c1, 0           @ write SCR (with NS bit set)
+       isb
+ 
+-#ifdef CONFIG_ARMV7_VIRT
+-      mrceq   p15, 0, r0, c12, c0, 1          @ get MVBAR value
+-      mcreq   p15, 4, r0, c12, c0, 0          @ write HVBAR
+-#endif
+       bne     1f
+ 
+       @ Reset CNTVOFF to 0 before leaving monitor mode
+-      mrc     p15, 0, r0, c0, c1, 1           @ read ID_PFR1
+-      ands    r0, r0, #CPUID_ARM_GENTIMER_MASK        @ test arch timer bits
+-      movne   r0, #0
+-      mcrrne  p15, 4, r0, r0, c14             @ Reset CNTVOFF to zero
++      mrc     p15, 0, r4, c0, c1, 1           @ read ID_PFR1
++      ands    r4, r4, #CPUID_ARM_GENTIMER_MASK        @ test arch timer bits
++      movne   r4, #0
++      mcrrne  p15, 4, r4, r4, c14             @ Reset CNTVOFF to zero
+ 1:
+-      movs    pc, lr                          @ return to non-secure SVC
+-
+-_hyp_trap:
+-      mrs     lr, elr_hyp     @ for older asm: .byte 0x00, 0xe3, 0x0e, 0xe1
+-      mov pc, lr                              @ do no switch modes, but
+-                                              @ return to caller
+-
++      mov     lr, ip
++      mov     ip, #(F_BIT | I_BIT | A_BIT)    @ Set A, I and F
++      tst     lr, #1                          @ Check for Thumb PC
++      orrne   ip, ip, #T_BIT                  @ Set T if Thumb
++      orr     ip, ip, r6                      @ Slot target mode in
++      msr     spsr_cxfs, ip                   @ Set full SPSR
++      movs    pc, lr                          @ ERET to non-secure
++
++ENTRY(_do_nonsec_entry)
++      mov     ip, r0
++      mov     r0, r1
++      mov     r1, r2
++      mov     r2, r3
++      smc     #0
++ENDPROC(_do_nonsec_entry)
++
++.macro get_cbar_addr  addr
++#ifdef CONFIG_ARM_GIC_BASE_ADDRESS
++      ldr     \addr, =CONFIG_ARM_GIC_BASE_ADDRESS
++#else
++      mrc     p15, 4, \addr, c15, c0, 0       @ read CBAR
++      bfc     \addr, #0, #15                  @ clear reserved bits
++#endif
++.endm
++
++.macro get_gicd_addr  addr
++      get_cbar_addr   \addr
++      add     \addr, \addr, #GIC_DIST_OFFSET  @ GIC dist i/f offset
++.endm
++
++.macro get_gicc_addr  addr, tmp
++      get_cbar_addr   \addr
++      is_cpu_virt_capable \tmp
++      movne   \tmp, #GIC_CPU_OFFSET_A9        @ GIC CPU offset for A9
++      moveq   \tmp, #GIC_CPU_OFFSET_A15       @ GIC CPU offset for A15/A7
++      add     \addr, \addr, \tmp
++.endm
++
++#ifndef CONFIG_ARMV7_PSCI
+ /*
+  * Secondary CPUs start here and call the code for the core specific parts
+  * of the non-secure and HYP mode transition. The GIC distributor specific
+@@ -74,31 +112,21 @@ _hyp_trap:
+  * Then they go back to wfi and wait to be woken up by the kernel again.
+  */
+ ENTRY(_smp_pen)
+-      mrs     r0, cpsr
+-      orr     r0, r0, #0xc0
+-      msr     cpsr, r0                        @ disable interrupts
+-      ldr     r1, =_start
+-      mcr     p15, 0, r1, c12, c0, 0          @ set VBAR
++      cpsid   i
++      cpsid   f
+ 
+       bl      _nonsec_init
+-      mov     r12, r0                         @ save GICC address
+-#ifdef CONFIG_ARMV7_VIRT
+-      bl      _switch_to_hyp
+-#endif
+-
+-      ldr     r1, [r12, #GICC_IAR]            @ acknowledge IPI
+-      str     r1, [r12, #GICC_EOIR]           @ signal end of interrupt
+ 
+       adr     r0, _smp_pen                    @ do not use this address again
+       b       smp_waitloop                    @ wait for IPIs, board specific
+ ENDPROC(_smp_pen)
++#endif
+ 
+ /*
+  * Switch a core to non-secure state.
+  *
+  *  1. initialize the GIC per-core interface
+  *  2. allow coprocessor access in non-secure modes
+- *  3. switch the cpu mode (by calling "smc #0")
+  *
+  * Called from smp_pen by secondary cores and directly by the BSP.
+  * Do not assume that the stack is available and only use registers
+@@ -108,38 +136,23 @@ ENDPROC(_smp_pen)
+  * though, but we check this in C before calling this function.
+  */
+ ENTRY(_nonsec_init)
+-#ifdef CONFIG_ARM_GIC_BASE_ADDRESS
+-      ldr     r2, =CONFIG_ARM_GIC_BASE_ADDRESS
+-#else
+-      mrc     p15, 4, r2, c15, c0, 0          @ read CBAR
+-      bfc     r2, #0, #15                     @ clear reserved bits
+-#endif
+-      add     r3, r2, #GIC_DIST_OFFSET        @ GIC dist i/f offset
++      get_gicd_addr   r3
++
+       mvn     r1, #0                          @ all bits to 1
+       str     r1, [r3, #GICD_IGROUPRn]        @ allow private interrupts
+ 
+-      mrc     p15, 0, r0, c0, c0, 0           @ read MIDR
+-      ldr     r1, =MIDR_PRIMARY_PART_MASK
+-      and     r0, r0, r1                      @ mask out variant and revision
++      get_gicc_addr   r3, r1
+ 
+-      ldr     r1, =MIDR_CORTEX_A7_R0P0 & MIDR_PRIMARY_PART_MASK
+-      cmp     r0, r1                          @ check for Cortex-A7
+-
+-      ldr     r1, =MIDR_CORTEX_A15_R0P0 & MIDR_PRIMARY_PART_MASK
+-      cmpne   r0, r1                          @ check for Cortex-A15
+-
+-      movne   r1, #GIC_CPU_OFFSET_A9          @ GIC CPU offset for A9
+-      moveq   r1, #GIC_CPU_OFFSET_A15         @ GIC CPU offset for A15/A7
+-      add     r3, r2, r1                      @ r3 = GIC CPU i/f addr
+-
+-      mov     r1, #1                          @ set GICC_CTLR[enable]
++      mov     r1, #3                          @ Enable both groups
+       str     r1, [r3, #GICC_CTLR]            @ and clear all other bits
+       mov     r1, #0xff
+       str     r1, [r3, #GICC_PMR]             @ set priority mask register
+ 
++      mrc     p15, 0, r0, c1, c1, 2
+       movw    r1, #0x3fff
+-      movt    r1, #0x0006
+-      mcr     p15, 0, r1, c1, c1, 2           @ NSACR = all copros to non-sec
++      movt    r1, #0x0004
++      orr     r0, r0, r1
++      mcr     p15, 0, r0, c1, c1, 2           @ NSACR = all copros to non-sec
+ 
+ /* The CNTFRQ register of the generic timer needs to be
+  * programmed in secure state. Some primary bootloaders / firmware
+@@ -157,21 +170,9 @@ ENTRY(_nonsec_init)
+ 
+       adr     r1, _monitor_vectors
+       mcr     p15, 0, r1, c12, c0, 1          @ set MVBAR to secure vectors
+-
+-      mrc     p15, 0, ip, c12, c0, 0          @ save secure copy of VBAR
+-
+       isb
+-      smc     #0                              @ call into MONITOR mode
+-
+-      mcr     p15, 0, ip, c12, c0, 0          @ write non-secure copy of VBAR
+-
+-      mov     r1, #1
+-      str     r1, [r3, #GICC_CTLR]            @ enable non-secure CPU i/f
+-      add     r2, r2, #GIC_DIST_OFFSET
+-      str     r1, [r2, #GICD_CTLR]            @ allow private interrupts
+ 
+       mov     r0, r3                          @ return GICC address
+-
+       bx      lr
+ ENDPROC(_nonsec_init)
+ 
+@@ -183,18 +184,10 @@ ENTRY(smp_waitloop)
+       ldr     r1, [r1]
+       cmp     r0, r1                  @ make sure we dont execute this code
+       beq     smp_waitloop            @ again (due to a spurious wakeup)
+-      mov     pc, r1
++      mov     r0, r1
++      b       _do_nonsec_entry
+ ENDPROC(smp_waitloop)
+ .weak smp_waitloop
+ #endif
+ 
+-ENTRY(_switch_to_hyp)
+-      mov     r0, lr
+-      mov     r1, sp                          @ save SVC copy of LR and SP
+-      isb
+-      hvc #0                   @ for older asm: .byte 0x70, 0x00, 0x40, 0xe1
+-      mov     sp, r1
+-      mov     lr, r0                          @ restore SVC copy of LR and SP
+-
+-      bx      lr
+-ENDPROC(_switch_to_hyp)
++      .popsection
+diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c
+index 2cd604f..6500030 100644
+--- a/arch/arm/cpu/armv7/virt-v7.c
++++ b/arch/arm/cpu/armv7/virt-v7.c
+@@ -13,17 +13,10 @@
+ #include <asm/armv7.h>
+ #include <asm/gic.h>
+ #include <asm/io.h>
++#include <asm/secure.h>
+ 
+ unsigned long gic_dist_addr;
+ 
+-static unsigned int read_cpsr(void)
+-{
+-      unsigned int reg;
+-
+-      asm volatile ("mrs %0, cpsr\n" : "=r" (reg));
+-      return reg;
+-}
+-
+ static unsigned int read_id_pfr1(void)
+ {
+       unsigned int reg;
+@@ -72,6 +65,18 @@ static unsigned long get_gicd_base_address(void)
+ #endif
+ }
+ 
++static void relocate_secure_section(void)
++{
++#ifdef CONFIG_ARMV7_SECURE_BASE
++      size_t sz = __secure_end - __secure_start;
++
++      memcpy((void *)CONFIG_ARMV7_SECURE_BASE, __secure_start, sz);
++      flush_dcache_range(CONFIG_ARMV7_SECURE_BASE,
++                         CONFIG_ARMV7_SECURE_BASE + sz + 1);
++      invalidate_icache_all();
++#endif
++}
++
+ static void kick_secondary_cpus_gic(unsigned long gicdaddr)
+ {
+       /* kick all CPUs (except this one) by writing to GICD_SGIR */
+@@ -83,35 +88,7 @@ void __weak smp_kick_all_cpus(void)
+       kick_secondary_cpus_gic(gic_dist_addr);
+ }
+ 
+-int armv7_switch_hyp(void)
+-{
+-      unsigned int reg;
+-
+-      /* check whether we are in HYP mode already */
+-      if ((read_cpsr() & 0x1f) == 0x1a) {
+-              debug("CPU already in HYP mode\n");
+-              return 0;
+-      }
+-
+-      /* check whether the CPU supports the virtualization extensions */
+-      reg = read_id_pfr1();
+-      if ((reg & CPUID_ARM_VIRT_MASK) != 1 << CPUID_ARM_VIRT_SHIFT) {
+-              printf("HYP mode: Virtualization extensions not implemented.\n");
+-              return -1;
+-      }
+-
+-      /* call the HYP switching code on this CPU also */
+-      _switch_to_hyp();
+-
+-      if ((read_cpsr() & 0x1F) != 0x1a) {
+-              printf("HYP mode: switch not successful.\n");
+-              return -1;
+-      }
+-
+-      return 0;
+-}
+-
+-int armv7_switch_nonsec(void)
++int armv7_init_nonsec(void)
+ {
+       unsigned int reg;
+       unsigned itlinesnr, i;
+@@ -147,11 +124,13 @@ int armv7_switch_nonsec(void)
+       for (i = 1; i <= itlinesnr; i++)
+               writel((unsigned)-1, gic_dist_addr + GICD_IGROUPRn + 4 * i);
+ 
+-      smp_set_core_boot_addr((unsigned long)_smp_pen, -1);
++#ifndef CONFIG_ARMV7_PSCI
++      smp_set_core_boot_addr((unsigned long)secure_ram_addr(_smp_pen), -1);
+       smp_kick_all_cpus();
++#endif
+ 
+       /* call the non-sec switching code on this CPU also */
+-      _nonsec_init();
+-
++      relocate_secure_section();
++      secure_ram_addr(_nonsec_init)();
+       return 0;
+ }
+diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h
+index 395444e..11476dd 100644
+--- a/arch/arm/include/asm/armv7.h
++++ b/arch/arm/include/asm/armv7.h
+@@ -78,13 +78,17 @@ void v7_outer_cache_inval_range(u32 start, u32 end);
+ 
+ #if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
+ 
+-int armv7_switch_nonsec(void);
+-int armv7_switch_hyp(void);
++int armv7_init_nonsec(void);
+ 
+ /* defined in assembly file */
+ unsigned int _nonsec_init(void);
++void _do_nonsec_entry(void *target_pc, unsigned long r0,
++                    unsigned long r1, unsigned long r2);
+ void _smp_pen(void);
+-void _switch_to_hyp(void);
++
++extern char __secure_start[];
++extern char __secure_end[];
++
+ #endif /* CONFIG_ARMV7_NONSEC || CONFIG_ARMV7_VIRT */
+ 
+ #endif /* ! __ASSEMBLY__ */
+diff --git a/arch/arm/include/asm/secure.h b/arch/arm/include/asm/secure.h
+new file mode 100644
+index 0000000..effdb18
+--- /dev/null
++++ b/arch/arm/include/asm/secure.h
+@@ -0,0 +1,26 @@
++#ifndef __ASM_SECURE_H
++#define __ASM_SECURE_H
++
++#include <config.h>
++
++#ifdef CONFIG_ARMV7_SECURE_BASE
++/*
++ * Warning, horror ahead.
++ *
++ * The target code lives in our "secure ram", but u-boot doesn't know
++ * that, and has blindly added reloc_off to every relocation
++ * entry. Gahh. Do the opposite conversion. This hack also prevents
++ * GCC from generating code veeners, which u-boot doesn't relocate at
++ * all...
++ */
++#define secure_ram_addr(_fn) ({                                               \
++                      DECLARE_GLOBAL_DATA_PTR;                        \
++                      void *__fn = _fn;                               \
++                      typeof(_fn) *__tmp = (__fn - gd->reloc_off);    \
++                      __tmp;                                          \
++              })
++#else
++#define secure_ram_addr(_fn)  (_fn)
++#endif
++
++#endif
+diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
+index 10634a4..61aa14e 100644
+--- a/arch/arm/lib/bootm.c
++++ b/arch/arm/lib/bootm.c
+@@ -20,6 +20,7 @@
+ #include <libfdt.h>
+ #include <fdt_support.h>
+ #include <asm/bootm.h>
++#include <asm/secure.h>
+ #include <linux/compiler.h>
+ 
+ #if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
+@@ -184,27 +185,17 @@ static void setup_end_tag(bd_t *bd)
+ 
+ __weak void setup_board_tags(struct tag **in_params) {}
+ 
++#ifdef CONFIG_ARM64
+ static void do_nonsec_virt_switch(void)
+ {
+-#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
+-      if (armv7_switch_nonsec() == 0)
+-#ifdef CONFIG_ARMV7_VIRT
+-              if (armv7_switch_hyp() == 0)
+-                      debug("entered HYP mode\n");
+-#else
+-              debug("entered non-secure state\n");
+-#endif
+-#endif
+-
+-#ifdef CONFIG_ARM64
+       smp_kick_all_cpus();
+       flush_dcache_all();     /* flush cache before swtiching to EL2 */
+       armv8_switch_to_el2();
+ #ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+       armv8_switch_to_el1();
+ #endif
+-#endif
+ }
++#endif
+ 
+ /* Subcommand: PREP */
+ static void boot_prep_linux(bootm_headers_t *images)
+@@ -287,8 +278,13 @@ static void boot_jump_linux(bootm_headers_t *images, int flag)
+               r2 = gd->bd->bi_boot_params;
+ 
+       if (!fake) {
+-              do_nonsec_virt_switch();
++#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
++              armv7_init_nonsec();
++              secure_ram_addr(_do_nonsec_entry)(kernel_entry,
++                                                0, machid, r2);
++#else
+               kernel_entry(0, machid, r2);
++#endif
+       }
+ #endif
+ }
+From 8ea1554da4a6e556d3213a77cf59daa1c154bdb5 Mon Sep 17 00:00:00 2001
+From: Marc Zyngier <marc.zyngier@arm.com>
+Date: Sat, 7 Dec 2013 11:19:13 +0000
+Subject: [PATCH] ARM: HYP/non-sec: add generic ARMv7 PSCI code
+
+Implement core support for PSCI. As this is generic code, it doesn't
+implement anything really useful (all the functions are returning
+Not Implemented).
+
+Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
+---
+ arch/arm/cpu/armv7/Makefile |   4 ++
+ arch/arm/cpu/armv7/psci.S   | 105 ++++++++++++++++++++++++++++++++++++++++++++
+ arch/arm/include/asm/psci.h |  35 +++++++++++++++
+ 3 files changed, 144 insertions(+)
+ create mode 100644 arch/arm/cpu/armv7/psci.S
+ create mode 100644 arch/arm/include/asm/psci.h
+
+diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
+index 6f17771..0cf5c45 100644
+--- a/arch/arm/cpu/armv7/Makefile
++++ b/arch/arm/cpu/armv7/Makefile
+@@ -24,6 +24,10 @@ obj-y       += nonsec_virt.o
+ obj-y += virt-v7.o
+ endif
+ 
++ifneq ($(CONFIG_ARMV7_PSCI),)
++obj-y += psci.o
++endif
++
+ obj-$(CONFIG_KONA) += kona-common/
+ obj-$(CONFIG_OMAP_COMMON) += omap-common/
+ obj-$(CONFIG_TEGRA) += tegra-common/
+diff --git a/arch/arm/cpu/armv7/psci.S b/arch/arm/cpu/armv7/psci.S
+new file mode 100644
+index 0000000..a9341e0
+--- /dev/null
++++ b/arch/arm/cpu/armv7/psci.S
+@@ -0,0 +1,105 @@
++/*
++ * Copyright (C) 2013 - ARM Ltd
++ * Author: Marc Zyngier <marc.zyngier@arm.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <config.h>
++#include <linux/linkage.h>
++#include <asm/psci.h>
++
++      .pushsection ._secure.text, "ax"
++
++      .arch_extension sec
++
++      .align  5
++      .globl _psci_vectors
++_psci_vectors:
++      b       default_psci_vector     @ reset
++      b       default_psci_vector     @ undef
++      b       _smc_psci               @ smc
++      b       default_psci_vector     @ pabort
++      b       default_psci_vector     @ dabort
++      b       default_psci_vector     @ hyp
++      b       default_psci_vector     @ irq
++      b       psci_fiq_enter          @ fiq
++
++ENTRY(psci_fiq_enter)
++      movs    pc, lr
++ENDPROC(psci_fiq_enter)
++.weak psci_fiq_enter
++
++ENTRY(default_psci_vector)
++      movs    pc, lr
++ENDPROC(default_psci_vector)
++.weak default_psci_vector
++
++ENTRY(psci_cpu_suspend)
++ENTRY(psci_cpu_off)
++ENTRY(psci_cpu_on)
++ENTRY(psci_migrate)
++      mov     r0, #ARM_PSCI_RET_NI    @ Return -1 (Not Implemented)
++      mov     pc, lr
++ENDPROC(psci_migrate)
++ENDPROC(psci_cpu_on)
++ENDPROC(psci_cpu_off)
++ENDPROC(psci_cpu_suspend)
++.weak psci_cpu_suspend
++.weak psci_cpu_off
++.weak psci_cpu_on
++.weak psci_migrate
++
++_psci_table:
++      .word   ARM_PSCI_FN_CPU_SUSPEND
++      .word   psci_cpu_suspend
++      .word   ARM_PSCI_FN_CPU_OFF
++      .word   psci_cpu_off
++      .word   ARM_PSCI_FN_CPU_ON
++      .word   psci_cpu_on
++      .word   ARM_PSCI_FN_MIGRATE
++      .word   psci_migrate
++      .word   0
++      .word   0
++
++_smc_psci:
++      push    {r3-r7,lr}
++
++      @ Switch to secure
++      mrc     p15, 0, r7, c1, c1, 0
++      bic     r4, r7, #1
++      mcr     p15, 0, r4, c1, c1, 0
++      isb
++
++      adr     r4, _psci_table
++1:    ldr     r5, [r4]        @ Load PSCI function ID
++      ldr     r6, [r4, #4]    @ Load target PC
++      cmp     r5, #0          @ If reach the end, bail out
++      mvneq   r0, #0          @ Return -1 (Not Implemented)
++      beq     2f
++      cmp     r0, r5          @ If not matching, try next entry
++      addne   r4, r4, #8
++      bne     1b
++      cmp     r6, #0          @ Not implemented
++      moveq   r0, #ARM_PSCI_RET_NI
++      beq     2f
++
++      blx     r6              @ Execute PSCI function
++
++      @ Switch back to non-secure
++      mcr     p15, 0, r7, c1, c1, 0
++
++2:    pop     {r3-r7, lr}
++      movs    pc, lr          @ Return to the kernel
++
++      .popsection
+diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h
+new file mode 100644
+index 0000000..704b4b0
+--- /dev/null
++++ b/arch/arm/include/asm/psci.h
+@@ -0,0 +1,35 @@
++/*
++ * Copyright (C) 2013 - ARM Ltd
++ * Author: Marc Zyngier <marc.zyngier@arm.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#ifndef __ARM_PSCI_H__
++#define __ARM_PSCI_H__
++
++/* PSCI interface */
++#define ARM_PSCI_FN_BASE              0x95c1ba5e
++#define ARM_PSCI_FN(n)                        (ARM_PSCI_FN_BASE + (n))
++
++#define ARM_PSCI_FN_CPU_SUSPEND               ARM_PSCI_FN(0)
++#define ARM_PSCI_FN_CPU_OFF           ARM_PSCI_FN(1)
++#define ARM_PSCI_FN_CPU_ON            ARM_PSCI_FN(2)
++#define ARM_PSCI_FN_MIGRATE           ARM_PSCI_FN(3)
++
++#define ARM_PSCI_RET_SUCCESS          0
++#define ARM_PSCI_RET_NI                       (-1)
++#define ARM_PSCI_RET_INVAL            (-2)
++#define ARM_PSCI_RET_DENIED           (-3)
++
++#endif /* __ARM_PSCI_H__ */
+From 0ca6171c385fed00125b320592ee94922f44f13a Mon Sep 17 00:00:00 2001
+From: Marc Zyngier <marc.zyngier@arm.com>
+Date: Sat, 7 Dec 2013 11:19:14 +0000
+Subject: [PATCH] ARM: HYP/non-sec: add the option for a second-stage monitor
+
+Allow the switch to a second stage secure monitor just before
+switching to non-secure.
+
+This allows a resident piece of firmware to be active once the
+kernel has been entered (the u-boot monitor is dead anyway,
+its pages being reused).
+
+Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
+---
+ arch/arm/cpu/armv7/nonsec_virt.S | 13 +++++++++++--
+ 1 file changed, 11 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S
+index 2a43e3c..745670e 100644
+--- a/arch/arm/cpu/armv7/nonsec_virt.S
++++ b/arch/arm/cpu/armv7/nonsec_virt.S
+@@ -44,10 +44,19 @@ _monitor_vectors:
+  * ip: target PC
+  */
+ _secure_monitor:
++#ifdef CONFIG_ARMV7_PSCI
++      ldr     r5, =_psci_vectors              @ Switch to the next monitor
++      mcr     p15, 0, r5, c12, c0, 1
++      isb
++
++      @ Obtain a secure stack, and configure the PSCI backend
++      bl      psci_arch_init
++#endif
++
+       mrc     p15, 0, r5, c1, c1, 0           @ read SCR
+-      bic     r5, r5, #0x4e                   @ clear IRQ, FIQ, EA, nET bits
++      bic     r5, r5, #0x4a                   @ clear IRQ, EA, nET bits
+       orr     r5, r5, #0x31                   @ enable NS, AW, FW bits
+-
++                                              @ FIQ preserved for secure mode
+       mov     r6, #SVC_MODE                   @ default mode is SVC
+       is_cpu_virt_capable r4
+ #ifdef CONFIG_ARMV7_VIRT
+From 9aa373162eb2cc0055a6e4ecd46977c911de1124 Mon Sep 17 00:00:00 2001
+From: Ma Haijun <mahaijuns@gmail.com>
+Date: Sat, 15 Feb 2014 12:51:10 +0000
+Subject: [PATCH] ARM: convert arch_fixup_memory_node to a generic FDT fixup
+ function
+
+Some architecture needs extra device tree setup. Instead of adding
+yet another hook, convert arch_fixup_memory_node to be a generic
+FDT fixup function.
+
+[maz: collapsed 3 patches into one, rewrote commit message]
+
+Signed-off-by: Ma Haijun <mahaijuns@gmail.com>
+Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
+---
+ arch/arm/lib/bootm-fdt.c | 2 +-
+ arch/arm/lib/bootm.c     | 2 +-
+ common/image-fdt.c       | 7 +++++--
+ include/common.h         | 6 +++---
+ 4 files changed, 10 insertions(+), 7 deletions(-)
+
+diff --git a/arch/arm/lib/bootm-fdt.c b/arch/arm/lib/bootm-fdt.c
+index e40691d..8394e15 100644
+--- a/arch/arm/lib/bootm-fdt.c
++++ b/arch/arm/lib/bootm-fdt.c
+@@ -20,7 +20,7 @@
+ 
+ DECLARE_GLOBAL_DATA_PTR;
+ 
+-int arch_fixup_memory_node(void *blob)
++int arch_fixup_fdt(void *blob)
+ {
+       bd_t *bd = gd->bd;
+       int bank;
+diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
+index 61aa14e..4cff6b0 100644
+--- a/arch/arm/lib/bootm.c
++++ b/arch/arm/lib/bootm.c
+@@ -357,7 +357,7 @@ void boot_prep_vxworks(bootm_headers_t *images)
+       if (images->ft_addr) {
+               off = fdt_path_offset(images->ft_addr, "/memory");
+               if (off < 0) {
+-                      if (arch_fixup_memory_node(images->ft_addr))
++                      if (arch_fixup_fdt(images->ft_addr))
+                               puts("## WARNING: fixup memory failed!\n");
+               }
+       }
+diff --git a/common/image-fdt.c b/common/image-fdt.c
+index a54a919..6f074de 100644
+--- a/common/image-fdt.c
++++ b/common/image-fdt.c
+@@ -445,7 +445,7 @@ __weak int ft_verify_fdt(void *fdt)
+       return 1;
+ }
+ 
+-__weak int arch_fixup_memory_node(void *blob)
++__weak int arch_fixup_fdt(void *blob)
+ {
+       return 0;
+ }
+@@ -462,7 +462,10 @@ int image_setup_libfdt(bootm_headers_t *images, void *blob,
+               puts(" - must RESET the board to recover.\n");
+               return -1;
+       }
+-      arch_fixup_memory_node(blob);
++      if (arch_fixup_fdt(blob) < 0) {
++              puts("ERROR: arch specific fdt fixup failed");
++              return -1;
++      }
+       if (IMAGE_OF_BOARD_SETUP)
+               ft_board_setup(blob, gd->bd);
+       fdt_fixup_ethernet(blob);
+diff --git a/include/common.h b/include/common.h
+index cbd3c9e..700b015 100644
+--- a/include/common.h
++++ b/include/common.h
+@@ -326,14 +326,14 @@ int arch_early_init_r(void);
+ void board_show_dram(ulong size);
+ 
+ /**
+- * arch_fixup_memory_node() - Write arch-specific memory information to fdt
++ * arch_fixup_fdt() - Write arch-specific information to fdt
+  *
+- * Defined in arch/$(ARCH)/lib/bootm.c
++ * Defined in arch/$(ARCH)/lib/bootm-fdt.c
+  *
+  * @blob:     FDT blob to write to
+  * @return 0 if ok, or -ve FDT_ERR_... on failure
+  */
+-int arch_fixup_memory_node(void *blob);
++int arch_fixup_fdt(void *blob);
+ 
+ /* common/flash.c */
+ void flash_perror (int);
+From ccdf689da800c9f1c5226146e936b071c7ec8800 Mon Sep 17 00:00:00 2001
+From: Marc Zyngier <marc.zyngier@arm.com>
+Date: Sat, 7 Dec 2013 11:19:15 +0000
+Subject: [PATCH] ARM: HYP/non-sec/PSCI: emit DT nodes
+
+Generate the PSCI node in the device tree.
+
+Also add a reserve section for the "secure" code that lives in
+in normal RAM, so that the kernel knows it'd better not trip on
+it.
+
+Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
+---
+ arch/arm/cpu/armv7/Makefile  |   1 +
+ arch/arm/cpu/armv7/virt-dt.c | 100 +++++++++++++++++++++++++++++++++++++++++++
+ arch/arm/include/asm/armv7.h |   1 +
+ arch/arm/lib/bootm-fdt.c     |  11 ++++-
+ 4 files changed, 111 insertions(+), 2 deletions(-)
+ create mode 100644 arch/arm/cpu/armv7/virt-dt.c
+
+diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
+index 0cf5c45..93a5a69 100644
+--- a/arch/arm/cpu/armv7/Makefile
++++ b/arch/arm/cpu/armv7/Makefile
+@@ -22,6 +22,7 @@ endif
+ ifneq ($(CONFIG_ARMV7_NONSEC)$(CONFIG_ARMV7_VIRT),)
+ obj-y += nonsec_virt.o
+ obj-y += virt-v7.o
++obj-y += virt-dt.o
+ endif
+ 
+ ifneq ($(CONFIG_ARMV7_PSCI),)
+diff --git a/arch/arm/cpu/armv7/virt-dt.c b/arch/arm/cpu/armv7/virt-dt.c
+new file mode 100644
+index 0000000..0b0d6a7
+--- /dev/null
++++ b/arch/arm/cpu/armv7/virt-dt.c
+@@ -0,0 +1,100 @@
++/*
++ * Copyright (C) 2013 - ARM Ltd
++ * Author: Marc Zyngier <marc.zyngier@arm.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <common.h>
++#include <stdio_dev.h>
++#include <linux/ctype.h>
++#include <linux/types.h>
++#include <asm/global_data.h>
++#include <libfdt.h>
++#include <fdt_support.h>
++#include <asm/armv7.h>
++#include <asm/psci.h>
++
++static int fdt_psci(void *fdt)
++{
++#ifdef CONFIG_ARMV7_PSCI
++      int nodeoff;
++      int tmp;
++
++      nodeoff = fdt_path_offset(fdt, "/cpus");
++      if (nodeoff < 0) {
++              printf("couldn't find /cpus\n");
++              return nodeoff;
++      }
++
++      /* add 'enable-method = "psci"' to each cpu node */
++      for (tmp = fdt_first_subnode(fdt, nodeoff);
++           tmp >= 0;
++           tmp = fdt_next_subnode(fdt, tmp)) {
++              const struct fdt_property *prop;
++              int len;
++
++              prop = fdt_get_property(fdt, tmp, "device_type", &len);
++              if (!prop)
++                      continue;
++              if (len < 4)
++                      continue;
++              if (strcmp(prop->data, "cpu"))
++                      continue;
++
++              fdt_setprop_string(fdt, tmp, "enable-method", "psci");
++      }
++
++      nodeoff = fdt_path_offset(fdt, "/psci");
++      if (nodeoff < 0) {
++              nodeoff = fdt_path_offset(fdt, "/");
++              if (nodeoff < 0)
++                      return nodeoff;
++
++              nodeoff = fdt_add_subnode(fdt, nodeoff, "psci");
++              if (nodeoff < 0)
++                      return nodeoff;
++      }
++
++      tmp = fdt_setprop_string(fdt, nodeoff, "compatible", "arm,psci");
++      if (tmp)
++              return tmp;
++      tmp = fdt_setprop_string(fdt, nodeoff, "method", "smc");
++      if (tmp)
++              return tmp;
++      tmp = fdt_setprop_u32(fdt, nodeoff, "cpu_suspend", ARM_PSCI_FN_CPU_SUSPEND);
++      if (tmp)
++              return tmp;
++      tmp = fdt_setprop_u32(fdt, nodeoff, "cpu_off", ARM_PSCI_FN_CPU_OFF);
++      if (tmp)
++              return tmp;
++      tmp = fdt_setprop_u32(fdt, nodeoff, "cpu_on", ARM_PSCI_FN_CPU_ON);
++      if (tmp)
++              return tmp;
++      tmp = fdt_setprop_u32(fdt, nodeoff, "migrate", ARM_PSCI_FN_MIGRATE);
++      if (tmp)
++              return tmp;
++#endif
++      return 0;
++}
++
++int armv7_update_dt(void *fdt)
++{
++#ifndef CONFIG_ARMV7_SECURE_BASE
++      /* secure code lives in RAM, keep it alive */
++      fdt_add_mem_rsv(fdt, (unsigned long)__secure_start,
++                      __secure_end - __secure_start);
++#endif
++
++      return fdt_psci(fdt);
++}
+diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h
+index 11476dd..323f282 100644
+--- a/arch/arm/include/asm/armv7.h
++++ b/arch/arm/include/asm/armv7.h
+@@ -79,6 +79,7 @@ void v7_outer_cache_inval_range(u32 start, u32 end);
+ #if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
+ 
+ int armv7_init_nonsec(void);
++int armv7_update_dt(void *fdt);
+ 
+ /* defined in assembly file */
+ unsigned int _nonsec_init(void);
+diff --git a/arch/arm/lib/bootm-fdt.c b/arch/arm/lib/bootm-fdt.c
+index 8394e15..ccb76c7 100644
+--- a/arch/arm/lib/bootm-fdt.c
++++ b/arch/arm/lib/bootm-fdt.c
+@@ -17,13 +17,14 @@
+ 
+ #include <common.h>
+ #include <fdt_support.h>
++#include <asm/armv7.h>
+ 
+ DECLARE_GLOBAL_DATA_PTR;
+ 
+ int arch_fixup_fdt(void *blob)
+ {
+       bd_t *bd = gd->bd;
+-      int bank;
++      int bank, ret;
+       u64 start[CONFIG_NR_DRAM_BANKS];
+       u64 size[CONFIG_NR_DRAM_BANKS];
+ 
+@@ -32,5 +33,11 @@ int arch_fixup_fdt(void *blob)
+               size[bank] = bd->bi_dram[bank].size;
+       }
+ 
+-      return fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS);
++      ret = fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS);
++      if (ret)
++              return ret;
++
++#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
++      return armv7_update_dt(blob);
++#endif
+ }
+From d5ee64675e6481e4f29e48e494ea132cd74786c8 Mon Sep 17 00:00:00 2001
+From: Marc Zyngier <marc.zyngier@arm.com>
+Date: Sat, 7 Dec 2013 11:19:17 +0000
+Subject: [PATCH] sunxi: HYP/non-sec: add sun7i PSCI backend
+
+So far, only supporting the CPU_ON method.
+Other functions can be added later.
+
+Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
+---
+ arch/arm/cpu/armv7/sunxi/Makefile |   3 +
+ arch/arm/cpu/armv7/sunxi/psci.S   | 162 ++++++++++++++++++++++++++++++++++++++
+ include/configs/sun7i.h           |   6 ++
+ 3 files changed, 171 insertions(+)
+ create mode 100644 arch/arm/cpu/armv7/sunxi/psci.S
+
+diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
+index 19e4b17..0df6772 100644
+--- a/arch/arm/cpu/armv7/sunxi/Makefile
++++ b/arch/arm/cpu/armv7/sunxi/Makefile
+@@ -32,6 +32,9 @@ obj-y        += cpu_info.o
+ ifdef CONFIG_CMD_WATCHDOG
+ obj-$(CONFIG_CMD_WATCHDOG)    += cmd_watchdog.o
+ endif
++ifdef CONFIG_ARMV7_PSCI
++obj-y += psci.o
++endif
+ endif
+ 
+ ifdef CONFIG_SPL_BUILD
+diff --git a/arch/arm/cpu/armv7/sunxi/psci.S b/arch/arm/cpu/armv7/sunxi/psci.S
+new file mode 100644
+index 0000000..0084c81
+--- /dev/null
++++ b/arch/arm/cpu/armv7/sunxi/psci.S
+@@ -0,0 +1,162 @@
++/*
++ * Copyright (C) 2013 - ARM Ltd
++ * Author: Marc Zyngier <marc.zyngier@arm.com>
++ *
++ * Based on code by Carl van Schaik <carl@ok-labs.com>.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <config.h>
++#include <asm/psci.h>
++#include <asm/arch/cpu.h>
++
++/*
++ * Memory layout:
++ *
++ * SECURE_RAM to text_end :
++ *    ._secure_text section
++ * text_end to ALIGN_PAGE(text_end):
++ *    nothing
++ * ALIGN_PAGE(text_end) to ALIGN_PAGE(text_end) + 0x1000)
++ *    1kB of stack per CPU (4 CPUs max).
++ */
++
++      .pushsection ._secure.text, "ax"
++
++      .arch_extension sec
++
++#define       ONE_MS                  (CONFIG_SYS_CLK_FREQ / 1000)
++#define       TEN_MS                  (10 * ONE_MS)
++
++.macro        timer_wait      reg, ticks
++      @ Program CNTP_TVAL
++      movw    \reg, #(\ticks & 0xffff)
++      movt    \reg, #(\ticks >> 16)
++      mcr     p15, 0, \reg, c14, c2, 0
++      isb
++      @ Enable physical timer, mask interrupt
++      mov     \reg, #3
++      mcr     p15, 0, \reg, c14, c2, 1
++      @ Poll physical timer until ISTATUS is on
++1:    isb
++      mrc     p15, 0, \reg, c14, c2, 1
++      ands    \reg, \reg, #4
++      bne     1b
++      @ Disable timer
++      mov     \reg, #0
++      mcr     p15, 0, \reg, c14, c2, 1
++      isb
++.endm
++
++.globl        psci_arch_init
++psci_arch_init:
++      mrc     p15, 0, r5, c1, c1, 0   @ Read SCR
++      bic     r5, r5, #1              @ Secure mode
++      mcr     p15, 0, r5, c1, c1, 0   @ Write SCR
++      isb
++
++      mrc     p15, 0, r4, c0, c0, 5   @ MPIDR
++      and     r4, r4, #3              @ cpu number in cluster
++      mov     r5, #400                @ 1kB of stack per CPU
++      mul     r4, r4, r5
++
++      adr     r5, text_end            @ end of text
++      add     r5, r5, #0x2000         @ Skip two pages
++      lsr     r5, r5, #12             @ Align to start of page
++      lsl     r5, r5, #12
++      sub     sp, r5, r4              @ here's our stack!
++
++      bx      lr
++
++      @ r1 = target CPU
++      @ r2 = target PC
++.globl        psci_cpu_on
++psci_cpu_on:
++      adr     r0, _target_pc
++      str     r2, [r0]
++      dsb
++
++      movw    r0, #(SUNXI_CPUCFG_BASE & 0xffff)
++      movt    r0, #(SUNXI_CPUCFG_BASE >> 16)
++
++      @ CPU mask
++      and     r1, r1, #3      @ only care about first cluster
++      mov     r4, #1
++      lsl     r4, r4, r1
++
++      adr     r6, _sunxi_cpu_entry
++      str     r6, [r0, #0x1a4] @ PRIVATE_REG (boot vector)
++
++      @ Assert reset on target CPU
++      mov     r6, #0
++      lsl     r5, r1, #6      @ 64 bytes per CPU
++      add     r5, r5, #0x40   @ Offset from base
++      add     r5, r5, r0      @ CPU control block
++      str     r6, [r5]        @ Reset CPU
++
++      @ l1 invalidate
++      ldr     r6, [r0, #0x184]
++      bic     r6, r6, r4
++      str     r6, [r0, #0x184]
++
++      @ Lock CPU
++      ldr     r6, [r0, #0x1e4]
++      bic     r6, r6, r4
++      str     r6, [r0, #0x1e4]
++
++      @ Release power clamp
++      movw    r6, #0x1ff
++      movt    r6, #0
++1:    lsrs    r6, r6, #1
++      str     r6, [r0, #0x1b0]
++      bne     1b
++
++      timer_wait r1, TEN_MS
++
++      @ Clear power gating
++      ldr     r6, [r0, #0x1b4]
++      bic     r6, r6, #1
++      str     r6, [r0, #0x1b4]
++
++      @ Deassert reset on target CPU
++      mov     r6, #3
++      str     r6, [r5]
++
++      @ Unlock CPU
++      ldr     r6, [r0, #0x1e4]
++      orr     r6, r6, r4
++      str     r6, [r0, #0x1e4]
++
++      mov     r0, #ARM_PSCI_RET_SUCCESS       @ Return PSCI_RET_SUCCESS
++      mov     pc, lr
++
++_target_pc:
++      .word   0
++
++_sunxi_cpu_entry:
++      @ Set SMP bit
++      mrc     p15, 0, r0, c1, c0, 1
++      orr     r0, r0, #0x40
++      mcr     p15, 0, r0, c1, c0, 1
++      isb
++
++      bl      _nonsec_init
++      bl      psci_arch_init
++
++      adr     r0, _target_pc
++      ldr     r0, [r0]
++      b       _do_nonsec_entry
++
++text_end:
++      .popsection
+diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h
+index 11cc9ea..bae7b37 100644
+--- a/include/configs/sun7i.h
++++ b/include/configs/sun7i.h
+@@ -22,6 +22,12 @@
+ #define CONFIG_BOARD_POSTCLK_INIT 1
+ #endif
+ 
++#define CONFIG_ARMV7_VIRT             1
++#define CONFIG_ARMV7_NONSEC           1
++#define CONFIG_ARMV7_PSCI             1
++#define CONFIG_ARMV7_PSCI_NR_CPUS     2
++#define CONFIG_ARMV7_SECURE_BASE      SUNXI_SRAM_B_BASE
++
+ /*
+  * Include common sunxi configuration where most the settings are
+  */
+From a74a847c3727209a45c30a80c01b930938941dd4 Mon Sep 17 00:00:00 2001
+From: Marc Zyngier <marc.zyngier@arm.com>
+Date: Sat, 7 Dec 2013 11:19:18 +0000
+Subject: [PATCH] sunxi: HYP/non-sec: configure CNTFRQ on all CPUs
+
+CNTFRQ needs to be properly configured on all CPUs. Otherwise,
+virtual machines hoping to find valuable information on secondary
+CPUs will be disapointed...
+
+Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
+---
+ include/configs/sun7i.h | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h
+index bae7b37..58a254b 100644
+--- a/include/configs/sun7i.h
++++ b/include/configs/sun7i.h
+@@ -27,6 +27,7 @@
+ #define CONFIG_ARMV7_PSCI             1
+ #define CONFIG_ARMV7_PSCI_NR_CPUS     2
+ #define CONFIG_ARMV7_SECURE_BASE      SUNXI_SRAM_B_BASE
++#define CONFIG_SYS_CLK_FREQ           24000000
+ 
+ /*
+  * Include common sunxi configuration where most the settings are

diff --git a/src/patches/u-boot/sunxi/003-uboot-fix-gmac-not-working-reliable-on-bananapi.patch b/src/patches/u-boot/sunxi/003-uboot-fix-gmac-not-working-reliable-on-bananapi.patch
new file mode 100644 (file)
index 0000000..6bc8c93
--- /dev/null
+++ b/src/patches/u-boot/sunxi/003-uboot-fix-gmac-not-working-reliable-on-bananapi.patch
@@ -0,0 +1,20 @@
+diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c
+index e7ff952..f58c963 100644
+--- a/board/sunxi/gmac.c
++++ b/board/sunxi/gmac.c
+@@ -24,6 +24,15 @@ int sunxi_gmac_initialize(bd_t *bis)
+               CCM_GMAC_CTRL_GPIT_MII);
+ #endif
+ 
++      /*
++       * HdG: this is necessary to get GMAC to work reliable on the
++       * Bananapi. We don't know what these undocumented bits do, so this
++       * is a Bananapi specific hack for now.
++       */
++#ifdef CONFIG_BANANAPI
++      setbits_le32(&ccm->gmac_clk_cfg, 0x3 << 10);
++#endif
++
+       /* Configure pin mux settings for GMAC */
+       for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) {
+ #ifdef CONFIG_RGMII

diff --git a/src/scripts/update-bootloader b/src/scripts/update-bootloader
new file mode 100644 (file)
index 0000000..ad6fdb6
--- /dev/null
+++ b/src/scripts/update-bootloader
@@ -0,0 +1,142 @@
+#!/bin/bash
+############################################################################
+#                                                                          #
+# This file is part of the IPFire Firewall.                                #
+#                                                                          #
+# IPFire is free software; you can redistribute it and/or modify           #
+# it under the terms of the GNU General Public License as published by     #
+# the Free Software Foundation; either version 2 of the License, or        #
+# (at your option) any later version.                                      #
+#                                                                          #
+# IPFire is distributed in the hope that it will be useful,                #
+# but WITHOUT ANY WARRANTY; without even the implied warranty of           #
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the            #
+# GNU General Public License for more details.                             #
+#                                                                          #
+# You should have received a copy of the GNU General Public License        #
+# along with IPFire; if not, write to the Free Software                    #
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA #
+#                                                                          #
+# Copyright (C) 2014 IPFire Team <info@ipfire.org>.                        #
+#                                                                          #
+############################################################################
+
+GRUB_INSTALL_ARGS="--no-floppy --recheck"
+
+function find_bootloader_device() {
+       local mp
+       for mp in /boot /; do
+               if find_device "${mp}"; then
+                       return 0
+               fi
+       done
+
+       return 1
+}
+
+function find_device() {
+       local mountpoint="${1}"
+
+       local root
+       local dev mp fs flags rest
+       while read -r dev mp fs flags rest; do
+               # Skip unwanted entries
+               [ "${dev}" = "rootfs" ] && continue
+
+               if [ "${mp}" = "${mountpoint}" ] && [ -b "${dev}" ]; then
+                       root="$(basename "${dev}")"
+                       break
+               fi
+       done < /proc/mounts
+
+       # Get the actual device from the partition that holds /
+       while [ -n "${root}" ]; do
+               if [ -e "/sys/block/${root}" ]; then
+                       echo "${root}"
+                       return 0
+               fi
+
+               # Remove last character
+               root="${root::-1}"
+       done
+
+       return 1
+}
+
+function device_is_mdraid() {
+       local device="${1}"
+
+       [ -d "/sys/block/${device}/md" ]
+}
+
+function mdraid_get_slaves() {
+       local device="${1}"
+
+       local slave
+       for slave in /sys/block/${device}/slaves/*; do
+               basename "${slave}"
+       done 2>/dev/null
+}
+
+function grub_update_config() {
+       echo "Updating configuration..."
+
+       if ! grub-mkconfig -o /boot/grub/grub.cfg &>/dev/null; then
+               echo "Could not update configuration. Aborting." >&2
+               return 1
+       fi
+
+       return 0
+}
+
+function grub_install() {
+       local device="${1}"
+
+       echo "Installing GRUB on ${device}..."
+
+       if [ ! -b "${device}" ]; then
+               echo "${device} does not exist or is not a block device" >&2
+               return 1
+       fi
+
+       local args
+       for args in "" "--force"; do
+               if grub-install ${GRUB_INSTALL_ARGS} ${args} "${device}" &>/dev/null; then
+                       return 0
+               fi
+       done
+
+       echo "Could not install GRUB on ${device}" >&2
+       return 1
+}
+
+function main() {
+       # Find the root device
+       local device="$(find_bootloader_device)"
+       if [ -z "${device}" ]; then
+               echo "Could not find root device. Aborting." >&2
+               exit 1
+       fi
+
+       echo "Found bootloader device: /dev/${device}"
+
+       # Update configuration files
+       grub_update_config || exit $?
+
+       # Handle mdraid devices
+       if device_is_mdraid "${device}"; then
+               local slave
+               for slave in $(mdraid_get_slaves "${device}"); do
+                       grub_install "/dev/${slave}"
+               done
+
+       # Handle normal block devices
+       else
+               grub_install "/dev/${device}"
+       fi
+
+       return 0
+}
+
+# Run main function
+main

diff --git a/src/setup/po/LINGUAS b/src/setup/po/LINGUAS
index 7673daa944ec436c99a79a259b7c661a54b081e6..6fbf14ca7e7fc989771535a0ca98ba1a48baa641 100644 (file)
--- a/src/setup/po/LINGUAS
+++ b/src/setup/po/LINGUAS
@@ -1 +1,37 @@
+ar
+ca
+cs_CZ
+da
 de
+el_GR
+es
+fa
+fr
+hr
+hu
+id
+it
+ja
+ja_JP
+jv
+km_KH
+nl
+pl
+pt_BR
+pt_PT
+ro_RO
+ru
+ru_RU
+rw
+sk
+sq
+sr
+su
+sv
+th
+tk
+tr
+uk
+uz@Latn
+vi
+zh

diff --git a/src/setup/po/da.po b/src/setup/po/da.po
index 7c696e5c14b7a9c3b2786d7900cebd0a3dc295a0..bf05c102eeef918a73c02d365d5fca0ddb0a0e43 100644 (file)
--- a/src/setup/po/da.po
+++ b/src/setup/po/da.po
@@ -9,8 +9,8 @@ msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2014-08-21 15:12+0000\n"
-"PO-Revision-Date: 2014-08-21 15:13+0000\n"
-"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"PO-Revision-Date: 2014-08-24 14:21+0000\n"
+"Last-Translator: Henrik Simonsen <cybermaze@gmail.com>\n"
 "Language-Team: Danish (http://www.transifex.com/projects/p/ipfire/language/da/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -440,7 +440,7 @@ msgid ""
 "Current config: %s\n"
 "\n"
 "%s"
-msgstr ""
+msgstr "Nuværende konfiguration: %s\n\n%s"
 
 #: networking.c:268
 msgid "Network configuration menu"

diff --git a/src/setup/po/de.po b/src/setup/po/de.po
index b1d7d3a9f6bc87381e7ede2d1d323f50c596ed40..12333a69e0a920a95f44e675e835af3670d12bd5 100644 (file)
--- a/src/setup/po/de.po
+++ b/src/setup/po/de.po
@@ -10,7 +10,7 @@ msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2014-08-21 15:12+0000\n"
-"PO-Revision-Date: 2014-08-21 18:01+0000\n"
+"PO-Revision-Date: 2014-08-24 19:39+0000\n"
 "Last-Translator: Stefan Schantl <stefan.schantl@ipfire.org>\n"
 "Language-Team: German (http://www.transifex.com/projects/p/ipfire/language/de/)\n"
 "MIME-Version: 1.0\n"
@@ -138,7 +138,7 @@ msgstr "Hostname"
 
 #: hostname.c:46
 msgid "Enter the machine's hostname."
-msgstr "Bitte geben Sie den Hostname der Maschine ein."
+msgstr "Bitte geben Sie den Hostnamen der Maschine ein."
 
 #: hostname.c:53
 msgid "Hostname cannot be empty."
@@ -158,7 +158,7 @@ msgstr "Tastaturbelegung"
 
 #: keymap.c:85
 msgid "Choose the type of keyboard you are using from the list below."
-msgstr "Wählen Sie aus dieser Liste den Tastatur-Typ aus, den Sie benutzen."
+msgstr "Bitte wählen Sie aus der Liste das gewünschte Tastatur-Layout aus."
 
 #: main.c:68 timezone.c:77
 msgid "Timezone"

diff --git a/src/setup/po/es.po b/src/setup/po/es.po
index 53fa0b3a1ee382cb7174ed907cce6d5552d34dca..060dd2d8b0fbf150f28a2af36077097c8085bbdb 100644 (file)
--- a/src/setup/po/es.po
+++ b/src/setup/po/es.po
@@ -3,13 +3,15 @@
 # This file is distributed under the same license as the PACKAGE package.
 # 
 # Translators:
+# Roberto Peña <roberto.pena@northsecure.es>, 2015
+# Roberto Peña <roberto.pena@northsecure.es>, 2015
 msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2014-08-21 15:12+0000\n"
-"PO-Revision-Date: 2014-08-21 15:13+0000\n"
-"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"PO-Revision-Date: 2015-02-01 09:37+0000\n"
+"Last-Translator: Roberto Peña <roberto.pena@northsecure.es>\n"
 "Language-Team: Spanish (http://www.transifex.com/projects/p/ipfire/language/es/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -19,31 +21,31 @@ msgstr ""
 
 #: dhcp.c:50
 msgid "Start address:"
-msgstr ""
+msgstr "Dirección inicial:"
 
 #: dhcp.c:51
 msgid "End address:"
-msgstr ""
+msgstr "Dirección final:"
 
 #: dhcp.c:52 networking.c:717
 msgid "Primary DNS:"
-msgstr ""
+msgstr "DNS primario:"
 
 #: dhcp.c:53 networking.c:723
 msgid "Secondary DNS:"
-msgstr ""
+msgstr "DNS secundario:"
 
 #: dhcp.c:54
 msgid "Default lease (mins):"
-msgstr ""
+msgstr "Concesión por defecto (mins):"
 
 #: dhcp.c:55
 msgid "Max lease (mins):"
-msgstr ""
+msgstr "Concesión máxima (mins):"
 
 #: dhcp.c:56
 msgid "Domain name suffix:"
-msgstr ""
+msgstr "Sufijo del nombre de dominio:"
 
 #: dhcp.c:86 dhcp.c:93 dhcp.c:101 domainname.c:34 hostname.c:37 keymap.c:70
 #: misc.c:40 misc.c:52 netstuff.c:377 netstuff.c:566 netstuff.c:704
@@ -51,19 +53,19 @@ msgstr ""
 #: networking.c:442 networking.c:552 networking.c:603 networking.c:610
 #: networking.c:713 timezone.c:63
 msgid "Unable to open settings file"
-msgstr ""
+msgstr "No se puede abrir archivo de configuración"
 
 #: dhcp.c:111
 msgid "DHCP server configuration"
-msgstr ""
+msgstr "Configuración del servidor DHCP"
 
 #: dhcp.c:116
 msgid "Configure the DHCP server by entering the settings information."
-msgstr ""
+msgstr "Configurar el servidor DHCP mediante la introducción de la información de configuración."
 
 #: dhcp.c:125
 msgid "Enabled"
-msgstr ""
+msgstr "Habilitado"
 
 #: dhcp.c:142 domainname.c:43 hostname.c:47 keymap.c:86 main.c:99 main.c:172
 #: main.c:174 netstuff.c:157 netstuff.c:733 netstuff.c:756 networking.c:163
@@ -71,367 +73,367 @@ msgstr ""
 #: networking.c:642 networking.c:653 networking.c:746 passwords.c:89
 #: timezone.c:78
 msgid "OK"
-msgstr ""
+msgstr "Ok"
 
 #: dhcp.c:143 domainname.c:43 hostname.c:47 keymap.c:86 netstuff.c:158
 #: netstuff.c:673 netstuff.c:733 netstuff.c:756 networking.c:305
 #: networking.c:410 networking.c:560 networking.c:653 networking.c:746
 #: passwords.c:89 timezone.c:78
 msgid "Cancel"
-msgstr ""
+msgstr "Cancelar"
 
 #: dhcp.c:156
 msgid ""
 "The following fields are invalid:\n"
 "\n"
-msgstr ""
+msgstr "Los siguientes campos son inválidos:\n\n"
 
 #: dhcp.c:159
 msgid "Start address"
-msgstr ""
+msgstr "Dirección de inicio"
 
 #: dhcp.c:165
 msgid "End address"
-msgstr ""
+msgstr "Dirección final"
 
 #: dhcp.c:173 networking.c:755
 msgid "Primary DNS"
-msgstr ""
+msgstr "DNS primario"
 
 #: dhcp.c:182 networking.c:764
 msgid "Secondary DNS"
-msgstr ""
+msgstr "DNS secundario"
 
 #: dhcp.c:189
 msgid "Default lease time"
-msgstr ""
+msgstr "Tiempo de concesión por defecto"
 
 #: dhcp.c:195
 msgid "Max. lease time"
-msgstr ""
+msgstr "Concesión máx. de tiempo"
 
 #: domainname.c:42 main.c:70
 msgid "Domain name"
-msgstr ""
+msgstr "Nombre de dominio"
 
 #: domainname.c:42
 msgid "Enter Domain name"
-msgstr ""
+msgstr "Introduzca el nombre de dominio"
 
 #: domainname.c:48
 msgid "Domain name cannot be empty."
-msgstr ""
+msgstr "El nombre de dominio no puede estar vacio."
 
 #: domainname.c:50
 msgid "Domain name cannot contain spaces."
-msgstr ""
+msgstr "El nombre de dominio no puede contener espacios."
 
 #: domainname.c:53
 msgid "Domain name may only contain letters, numbers, hyphens and periods."
-msgstr ""
+msgstr "El nombre de dominio sólo puede contener letras, números, guiones y puntos."
 
 #: hostname.c:46 main.c:69
 msgid "Hostname"
-msgstr ""
+msgstr "Nombre de host"
 
 #: hostname.c:46
 msgid "Enter the machine's hostname."
-msgstr ""
+msgstr "Introduzca el nombre de host de la máquina."
 
 #: hostname.c:53
 msgid "Hostname cannot be empty."
-msgstr ""
+msgstr "El nombre de host no puede estar vacio."
 
 #: hostname.c:55
 msgid "Hostname cannot contain spaces."
-msgstr ""
+msgstr "El nombre de host no puede contener espacios."
 
 #: hostname.c:58
 msgid "Hostname may only contain letters, numbers and hyphens."
-msgstr ""
+msgstr "El nombre de host sólo puede contener letras, números y guiones."
 
 #: keymap.c:84 main.c:67
 msgid "Keyboard mapping"
-msgstr ""
+msgstr "Mapa del teclado"
 
 #: keymap.c:85
 msgid "Choose the type of keyboard you are using from the list below."
-msgstr ""
+msgstr "Elija el tipo de teclado que está utilizando de la lista de abajo."
 
 #: main.c:68 timezone.c:77
 msgid "Timezone"
-msgstr ""
+msgstr "Zona horaria"
 
 #: main.c:71 networking.c:110 networking.c:115 networking.c:447
 msgid "Networking"
-msgstr ""
+msgstr "Networking"
 
 #: main.c:72 misc.c:147
 msgid "ISDN"
-msgstr ""
+msgstr "RDSI"
 
 #: main.c:73
 msgid "'root' password"
-msgstr ""
+msgstr "Contraseña de 'root'"
 
 #: main.c:74
 msgid "'admin' password"
-msgstr ""
+msgstr "Contraseña de 'admin'"
 
 #: main.c:90
 msgid "              <Tab>/<Alt-Tab> between elements   |  <Space> selects"
-msgstr ""
+msgstr "<Tab>/<Alt-Tab> entre elementos | <Space> seleccionar"
 
 #: main.c:97
 msgid "Section menu"
-msgstr ""
+msgstr "Menú de las secciones"
 
 #: main.c:98
 msgid "Select the item you wish to configure."
-msgstr ""
+msgstr "Seleccione el elemento que desea configurar."
 
 #: main.c:99
 msgid "Quit"
-msgstr ""
+msgstr "Salir"
 
 #: main.c:172
 msgid "Setup is complete."
-msgstr ""
+msgstr "La instalación está completa."
 
 #: main.c:174 netstuff.c:733 networking.c:560 networking.c:653
 msgid "Warning"
-msgstr ""
+msgstr "Advertencia"
 
 #: main.c:175
 msgid ""
 "Initial setup was not entirely complete. You must ensure that Setup is "
 "properly finished by running setup again at the shell."
-msgstr ""
+msgstr "La instalación inicial no ha sido completada enteramente. Debe asegurarse que está correctamente finalizada ejecutando la instalación en el shell."
 
 #: misc.c:62
 #, c-format
 msgid "Unable to write %s/main/hostname.conf"
-msgstr ""
+msgstr "No se puede escribir %s/main/hostname.conf"
 
 #: misc.c:71
 msgid "Unable to open main hosts file."
-msgstr ""
+msgstr "No se puede abrir archivo principal host."
 
 #: misc.c:76
 msgid "Unable to write /etc/hosts."
-msgstr ""
+msgstr "No se puede escribir /etc/hosts."
 
 #: misc.c:117
 msgid "Unable to write /etc/hosts.deny."
-msgstr ""
+msgstr "No se puede escribir /etc/hosts.deny."
 
 #: misc.c:125
 msgid "Unable to write /etc/hosts.allow."
-msgstr ""
+msgstr "No se puede escribir /etc/hosts.allow."
 
 #: misc.c:136
 msgid "Unable to set hostname."
-msgstr ""
+msgstr "No se puede establecer el nombre del host."
 
 #: misc.c:147
 msgid "Scanning and configuring ISDN devices."
-msgstr ""
+msgstr "Escaneando y configurando los dispositivos RDSI."
 
 #: misc.c:148
 msgid "Unable to scan for ISDN devices."
-msgstr ""
+msgstr "Incapaz de buscar los dispositivos RDSI."
 
 #: netstuff.c:86
 #, c-format
 msgid "Interface - %s"
-msgstr ""
+msgstr "Interfaz - %s"
 
 #: netstuff.c:91
 #, c-format
 msgid "Enter the IP address information for the %s interface."
-msgstr ""
+msgstr "Introduzca la información de la dirección IP para la interfaz %s."
 
 #: netstuff.c:103
 msgid "Static"
-msgstr ""
+msgstr "Estático"
 
 #: netstuff.c:104
 msgid "DHCP"
-msgstr ""
+msgstr "DHCP"
 
 #: netstuff.c:105
 msgid "PPP DIALUP (PPPoE, modem, ATM ...)"
-msgstr ""
+msgstr "PPP DIALUP (PPPoE, modem, ATM ...)"
 
 #: netstuff.c:113
 msgid "DHCP Hostname:"
-msgstr ""
+msgstr "Nombre del host DHCP:"
 
 #: netstuff.c:115
 msgid "Force DHCP MTU:"
-msgstr ""
+msgstr "Forzar DHCP MTU:"
 
 #: netstuff.c:134
 msgid "IP address:"
-msgstr ""
+msgstr "Dirección IP:"
 
 #: netstuff.c:146
 msgid "Network mask:"
-msgstr ""
+msgstr "Máscara de red:"
 
 #: netstuff.c:173 networking.c:749
 msgid "The following fields are invalid:"
-msgstr ""
+msgstr "Los siguientes campos son inválidos:"
 
 #: netstuff.c:183
 msgid "IP address"
-msgstr ""
+msgstr "Dirección IP"
 
 #: netstuff.c:189
 msgid "Network mask"
-msgstr ""
+msgstr "Máscara de red"
 
 #: netstuff.c:198
 msgid "DHCP hostname"
-msgstr ""
+msgstr "Nombre del host DHCP"
 
 #: netstuff.c:396 netstuff.c:709
 msgid "Unset"
-msgstr ""
+msgstr "No definido"
 
 #: netstuff.c:669
 #, c-format
 msgid "Please choose a networkcard for the following interface - %s."
-msgstr ""
+msgstr "Por favor elija una tarjeta de red para la siguiente interfaz - %s."
 
 #: netstuff.c:672
 msgid "Extended Network Menu"
-msgstr ""
+msgstr "Menú Extendido de Red"
 
 #: netstuff.c:673 networking.c:520
 msgid "Select"
-msgstr ""
+msgstr "Seleccionar"
 
 #: netstuff.c:673
 msgid "Identify"
-msgstr ""
+msgstr "Identificar"
 
 #: netstuff.c:678
 msgid "Device Identification"
-msgstr ""
+msgstr "Identificación del dispositivo"
 
 #: netstuff.c:678
 msgid "The lights on the selected port should flash now for 10 seconds..."
-msgstr ""
+msgstr "Las luces en el puerto seleccionado deben parpadear ahora durante 10 segundos ..."
 
 #: netstuff.c:679
 msgid "Identification is not supported by this interface."
-msgstr ""
+msgstr "La identificación no es compatible con esta interfaz."
 
 #: netstuff.c:691
 msgid "There are no unassigned interfaces on your system."
-msgstr ""
+msgstr "No hay interfaces no asignadas en el sistema."
 
 #: netstuff.c:732
 #, c-format
 msgid "Do you really want to remove the assigned %s interface?"
-msgstr ""
+msgstr "¿Realmente desea eliminar la interfaz asignada %s?"
 
 #: netstuff.c:755
 msgid "Select network driver"
-msgstr ""
+msgstr "Seleccionar controlador de red"
 
 #: netstuff.c:755
 msgid "Set additional module parameters"
-msgstr ""
+msgstr "Establecer parámetros de los módulos adicionales"
 
 #: netstuff.c:762
 msgid "Loading module..."
-msgstr ""
+msgstr "Leyendo módulo..."
 
 #: netstuff.c:777
 msgid "Unable to load driver module."
-msgstr ""
+msgstr "No se puede cargar el módulo controlador."
 
 #: netstuff.c:780
 msgid "Module name cannot be blank."
-msgstr ""
+msgstr "Nombre del módulo no puede estar en blanco."
 
 #: networking.c:110
 msgid "Stopping network..."
-msgstr ""
+msgstr "Deteniendo la red..."
 
 #: networking.c:115
 msgid "Restarting network..."
-msgstr ""
+msgstr "Reiniciando la red..."
 
 #: networking.c:146
 msgid "No GREEN interface assigned."
-msgstr ""
+msgstr "No asignada la interfaz GREEN."
 
 #: networking.c:152
 msgid "Missing an IP address on GREEN."
-msgstr ""
+msgstr "Falta la dirección IP en GREEN."
 
 #: networking.c:163
 msgid "Error"
-msgstr ""
+msgstr "Error"
 
 #: networking.c:163
 msgid "Ignore"
-msgstr ""
+msgstr "Ignorar"
 
 #: networking.c:164
 msgid "No RED interface assigned."
-msgstr ""
+msgstr "No asignada la interfaz RED."
 
 #: networking.c:173
 msgid "Missing an IP address on RED."
-msgstr ""
+msgstr "Falta la dirección IP en RED."
 
 #: networking.c:183
 msgid "No ORANGE interface assigned."
-msgstr ""
+msgstr "No asignada la interfaz ORANGE."
 
 #: networking.c:189
 msgid "Missing an IP address on ORANGE."
-msgstr ""
+msgstr "Falta la dirección IP en ORANGE."
 
 #: networking.c:199
 msgid "No BLUE interface assigned."
-msgstr ""
+msgstr "No asignada la interfaz BLUE."
 
 #: networking.c:205
 msgid "Missing an IP address on BLUE."
-msgstr ""
+msgstr "Falta la dirección IP en BLUE."
 
 #: networking.c:217
 msgid "Misssing DNS."
-msgstr ""
+msgstr "Falta DNS."
 
 #: networking.c:224
 msgid "Missing Default Gateway."
-msgstr ""
+msgstr "Falta Puerta de Enlace predeterminada."
 
 #: networking.c:237 networking.c:304
 msgid "Network configuration type"
-msgstr ""
+msgstr "Tipo de configuración de red"
 
 #: networking.c:238 networking.c:409
 msgid "Drivers and card assignments"
-msgstr ""
+msgstr "Asignación de controladores y tarjetas"
 
 #: networking.c:239 networking.c:640
 msgid "Address settings"
-msgstr ""
+msgstr "Configuración de dirección"
 
 #: networking.c:240 networking.c:743
 msgid "DNS and Gateway settings"
-msgstr ""
+msgstr "Configuración de DNS y Puerta de Enlace"
 
 #: networking.c:260
 msgid "When configuration is complete, a network restart will be required."
-msgstr ""
+msgstr "Cuando haya finalizado la configuración, será necesario el reinicio de la red."
 
 #: networking.c:267
 #, c-format
@@ -439,15 +441,15 @@ msgid ""
 "Current config: %s\n"
 "\n"
 "%s"
-msgstr ""
+msgstr "Configuración actual: %s\n\n%s"
 
 #: networking.c:268
 msgid "Network configuration menu"
-msgstr ""
+msgstr "Menú de la configuración de red"
 
 #: networking.c:269 networking.c:520 networking.c:642
 msgid "Done"
-msgstr ""
+msgstr "Hecho"
 
 #: networking.c:300
 #, c-format
@@ -456,7 +458,7 @@ msgid ""
 "list those interfaces which have ethernet attached. If you change this "
 "setting, a network restart will be required, and you will have to "
 "reconfigure the network driver assignments."
-msgstr ""
+msgstr "Seleccione la configuración de la red para %s. La lista de los siguientes tipos de configuración tienen que tener una conexión ethernet. Si cambia esta configuración, se requiere un reinicio de la red, y tendrá que volver a configurar las asignaciones de controlador de red."
 
 #: networking.c:307
 #, c-format
@@ -464,35 +466,35 @@ msgid ""
 "Not enough netcards for your choice.\n"
 "\n"
 "Needed: %d - Available: %d\n"
-msgstr ""
+msgstr "No hay suficientes tarjetas de red para su elección.\n\nNecesarias: %d - Disponibles: %d\n"
 
 #: networking.c:359
 msgid ""
 "Configure network drivers, and which interface each card is assigned to. The current configuration is as follows:\n"
 "\n"
-msgstr ""
+msgstr "Configurar los controladores de red y la interfaz que se ha asignado a cada tarjeta. La configuración actual es la siguiente:\n\n"
 
 #: networking.c:408
 msgid "Do you wish to change these settings?"
-msgstr ""
+msgstr "¿Desea cambiar esta configuración?"
 
 #: networking.c:447
 msgid "Restarting non-local network..."
-msgstr ""
+msgstr "Reiniciando redes no locales..."
 
 #: networking.c:464
 msgid ""
 "Please choose the interface you wish to change.\n"
 "\n"
-msgstr ""
+msgstr "Por favor, elija la interfaz que desea cambiar.\n\n"
 
 #: networking.c:519
 msgid "Assigned Cards"
-msgstr ""
+msgstr "Tarjetas asignadas"
 
 #: networking.c:520
 msgid "Remove"
-msgstr ""
+msgstr "Quitar"
 
 #: networking.c:556 networking.c:649
 #, c-format
@@ -501,84 +503,84 @@ msgid ""
 "connection to the %s machine will be broken, and you will have to reconnect "
 "on the new IP. This is a risky operation, and should only be attempted if "
 "you have physical access to the machine, should something go wrong."
-msgstr ""
+msgstr "Si cambia esta dirección IP y tiene iniciada una sesión en el sistema de forma remota, la conexión a la máquina %s será cortada  y tendrá que volver a conectar en la nueva IP. Esta es una operación arriesgada, y sólo debe intentarse si tiene acceso físico a la máquina, por si algo sale mal."
 
 #: networking.c:641
 msgid "Select the interface you wish to reconfigure."
-msgstr ""
+msgstr "Seleccione la interfaz que desea reconfigurar."
 
 #: networking.c:729
 msgid "Default gateway:"
-msgstr ""
+msgstr "Puerta de Enlace predeterminada:"
 
 #: networking.c:744
 msgid ""
 "Enter the DNS and gateway information. These settings are used only with "
 "Static IP (and DHCP if DNS set) on the RED interface."
-msgstr ""
+msgstr "Introduzca la información del DNS y la Puerta de Enlace. Estos ajustes se utilizan sólo con IP estática (y DHCP si está configurado DNS) en la interfaz de RED."
 
 #: networking.c:773
 msgid "Default gateway"
-msgstr ""
+msgstr "Puerta de Enlace predeterminada"
 
 #: networking.c:780
 msgid "Secondary DNS specified without a Primary DNS"
-msgstr ""
+msgstr "DNS secundario especificado sin DNS primario"
 
 #: passwords.c:33
 msgid ""
 "Enter the 'root' user password. Login as this user for commandline access."
-msgstr ""
+msgstr "Introduzca la contraseña de 'root'. Iniciar la sesión como este usuario para el acceso de linea de comandos."
 
 #: passwords.c:38 passwords.c:61
 msgid "Setting password"
-msgstr ""
+msgstr "Configuración de la contraseña"
 
 #: passwords.c:38
 msgid "Setting 'root' password...."
-msgstr ""
+msgstr "Configuración de la contraseña de 'root'..."
 
 #: passwords.c:39
 msgid "Problem setting 'root' password."
-msgstr ""
+msgstr "Problema en la configuración de la contraseña de 'root'."
 
 #: passwords.c:53
 #, c-format
 msgid ""
 "Enter %s 'admin' user password. This is the user to use for logging into the"
 " %s web administration pages."
-msgstr ""
+msgstr "Introduzca contraseña de usuario %s 'admin'. Este es el usuario que se utiliza para iniciar sesión en las páginas de administración web de %s."
 
 #: passwords.c:60
 #, c-format
 msgid "Setting %s 'admin' user password..."
-msgstr ""
+msgstr "Configuración de la contraseña del usuario %s 'admin'..."
 
 #: passwords.c:62
 #, c-format
 msgid "Problem setting %s 'admin' user password."
-msgstr ""
+msgstr "Problemas al configurar la contraseña del usuario %s 'admin'."
 
 #: passwords.c:76
 msgid "Password:"
-msgstr ""
+msgstr "Contraseña:"
 
 #: passwords.c:77
 msgid "Again:"
-msgstr ""
+msgstr "De nuevo:"
 
 #: passwords.c:95
 msgid "Password cannot be blank."
-msgstr ""
+msgstr "La contraseña no puede estar en blanco."
 
 #: passwords.c:102
 msgid "Passwords do not match."
-msgstr ""
+msgstr "Las contraseñas no coinciden."
 
 #: passwords.c:109
 msgid "Password cannot contain spaces."
-msgstr ""
+msgstr "La contraseña no puede contener espacios."
 
 #: timezone.c:77
 msgid "Choose the timezone you are in from the list below."
-msgstr ""
+msgstr "Seleccione la zona horaria de donde se encuentra en la lista de abajo."

diff --git a/src/setup/po/fa.po b/src/setup/po/fa.po
index 2e2adc43ca2d8d9bd44730f17e434d819d400180..a825ca8023b0f3921f20ae937da01eb54115d4cf 100644 (file)
--- a/src/setup/po/fa.po
+++ b/src/setup/po/fa.po
@@ -3,14 +3,15 @@
 # This file is distributed under the same license as the PACKAGE package.
 # 
 # Translators:
-# Khalil Delavaran <khalil.delavaran@gmail.com>, 2014
+# hashem ghavami <hashem.wolf@gmail.com>, 2014
+# Khalil Delavaran <khalil.delavaran@gmail.com>, 2014-2015
 msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2014-08-21 15:12+0000\n"
-"PO-Revision-Date: 2014-08-21 15:13+0000\n"
-"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"PO-Revision-Date: 2015-01-26 06:42+0000\n"
+"Last-Translator: Khalil Delavaran <khalil.delavaran@gmail.com>\n"
 "Language-Team: Persian (http://www.transifex.com/projects/p/ipfire/language/fa/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -52,7 +53,7 @@ msgstr "پسوند نام دامنه:"
 #: networking.c:442 networking.c:552 networking.c:603 networking.c:610
 #: networking.c:713 timezone.c:63
 msgid "Unable to open settings file"
-msgstr ""
+msgstr "نمی توان فایل پیکربندی را باز کرد"
 
 #: dhcp.c:111
 msgid "DHCP server configuration"
@@ -60,7 +61,7 @@ msgstr "پیکربندی سرور DHCP"
 
 #: dhcp.c:116
 msgid "Configure the DHCP server by entering the settings information."
-msgstr ""
+msgstr "سرویس دهنده DHcp  با داده و تنظیمات وارد شده پیکربندی شد"
 
 #: dhcp.c:125
 msgid "Enabled"
@@ -85,7 +86,7 @@ msgstr "نمی خواهم"
 msgid ""
 "The following fields are invalid:\n"
 "\n"
-msgstr ""
+msgstr "شاخص های زیر اشتباه هستند:\n\n"
 
 #: dhcp.c:159
 msgid "Start address"
@@ -129,7 +130,7 @@ msgstr "نام دامنه نمی تواند فاصله داشته باشد."
 
 #: domainname.c:53
 msgid "Domain name may only contain letters, numbers, hyphens and periods."
-msgstr ""
+msgstr "نام دامنه ممکن است شامل حروف، اعداد، خط فاصله و دوره های باشذ"
 
 #: hostname.c:46 main.c:69
 msgid "Hostname"
@@ -149,23 +150,23 @@ msgstr "نام هاست نمیتواند فاصله داشته باشد."
 
 #: hostname.c:58
 msgid "Hostname may only contain letters, numbers and hyphens."
-msgstr ""
+msgstr "نام هاست ممکن است شامل حروف، اعداد و خط فاصله باشد."
 
 #: keymap.c:84 main.c:67
 msgid "Keyboard mapping"
-msgstr ""
+msgstr "نگاشت کیبورد"
 
 #: keymap.c:85
 msgid "Choose the type of keyboard you are using from the list below."
-msgstr ""
+msgstr "نوع کی بورد خود را از لیست زیر گزینش کنید."
 
 #: main.c:68 timezone.c:77
 msgid "Timezone"
-msgstr ""
+msgstr "منطقه زمانی"
 
 #: main.c:71 networking.c:110 networking.c:115 networking.c:447
 msgid "Networking"
-msgstr ""
+msgstr "شبکه بندی"
 
 #: main.c:72 misc.c:147
 msgid "ISDN"
@@ -181,15 +182,15 @@ msgstr "گذر واژه 'admin'"
 
 #: main.c:90
 msgid "              <Tab>/<Alt-Tab> between elements   |  <Space> selects"
-msgstr ""
+msgstr "              <Tab>/<Alt-Tab> میان عنصری   |  <Space> گزینش"
 
 #: main.c:97
 msgid "Section menu"
-msgstr ""
+msgstr "برش منو"
 
 #: main.c:98
 msgid "Select the item you wish to configure."
-msgstr ""
+msgstr "اینترفیسی که قصد پیکربندی دوباره آنرا دارید گزینش کنید."
 
 #: main.c:99
 msgid "Quit"
@@ -207,50 +208,50 @@ msgstr "گوشزد"
 msgid ""
 "Initial setup was not entirely complete. You must ensure that Setup is "
 "properly finished by running setup again at the shell."
-msgstr ""
+msgstr "راه اندازی به پایان نرسیده است. شما با اجرای دوباره راه اندازی در خط فرمان باید مطمئن شوید که راه اندازی پایان یافته است."
 
 #: misc.c:62
 #, c-format
 msgid "Unable to write %s/main/hostname.conf"
-msgstr ""
+msgstr "نمی توان %s/main/hostname.conf را نوشت."
 
 #: misc.c:71
 msgid "Unable to open main hosts file."
-msgstr ""
+msgstr "نمی توان فایل هاست های اصلی را باز کرد."
 
 #: misc.c:76
 msgid "Unable to write /etc/hosts."
-msgstr ""
+msgstr "نمی توان در /etc/hosts نوشت."
 
 #: misc.c:117
 msgid "Unable to write /etc/hosts.deny."
-msgstr ""
+msgstr "نمی توان در /etc/hosts.deny نوشت."
 
 #: misc.c:125
 msgid "Unable to write /etc/hosts.allow."
-msgstr ""
+msgstr "نمی توان در /etc/hosts.allow نوشت."
 
 #: misc.c:136
 msgid "Unable to set hostname."
-msgstr ""
+msgstr "نمی توان نام هاست را پیکربندی کرد."
 
 #: misc.c:147
 msgid "Scanning and configuring ISDN devices."
-msgstr ""
+msgstr "پویش و پیکربندی دستگاه های ISDN."
 
 #: misc.c:148
 msgid "Unable to scan for ISDN devices."
-msgstr ""
+msgstr "نمی توان دستگاههای ISDN را پویش کرد."
 
 #: netstuff.c:86
 #, c-format
 msgid "Interface - %s"
-msgstr ""
+msgstr "اینترفیس - %s"
 
 #: netstuff.c:91
 #, c-format
 msgid "Enter the IP address information for the %s interface."
-msgstr ""
+msgstr "داده های آدرس IP برای اینترفیس %s را بنویسید."
 
 #: netstuff.c:103
 msgid "Static"
@@ -270,7 +271,7 @@ msgstr "نام هاست DHCP:"
 
 #: netstuff.c:115
 msgid "Force DHCP MTU:"
-msgstr ""
+msgstr "DHCP MTU به زور:"
 
 #: netstuff.c:134
 msgid "IP address:"
@@ -282,7 +283,7 @@ msgstr "ماسک شبکه:"
 
 #: netstuff.c:173 networking.c:749
 msgid "The following fields are invalid:"
-msgstr ""
+msgstr "شاخص های زیر اشتباه هستند"
 
 #: netstuff.c:183
 msgid "IP address"
@@ -298,16 +299,16 @@ msgstr "نام هاست DHCP"
 
 #: netstuff.c:396 netstuff.c:709
 msgid "Unset"
-msgstr ""
+msgstr "تنظیم نشده"
 
 #: netstuff.c:669
 #, c-format
 msgid "Please choose a networkcard for the following interface - %s."
-msgstr ""
+msgstr "خواهشمند است یک کارت شبکه برای اینترفیس %s زیر گزینش کنید."
 
 #: netstuff.c:672
 msgid "Extended Network Menu"
-msgstr ""
+msgstr "منوی گسترده شبکه"
 
 #: netstuff.c:673 networking.c:520
 msgid "Select"
@@ -315,28 +316,28 @@ msgstr "گزینش"
 
 #: netstuff.c:673
 msgid "Identify"
-msgstr ""
+msgstr "شناختن"
 
 #: netstuff.c:678
 msgid "Device Identification"
-msgstr ""
+msgstr "شناسایی دستگاه"
 
 #: netstuff.c:678
 msgid "The lights on the selected port should flash now for 10 seconds..."
-msgstr ""
+msgstr "چراغ های پورت گزینش شده، هم اکنون باید برای 10 ثانیه چشمک بزنند..."
 
 #: netstuff.c:679
 msgid "Identification is not supported by this interface."
-msgstr ""
+msgstr "این اینترفیس شناسایی را پشتیبانی نمی کند."
 
 #: netstuff.c:691
 msgid "There are no unassigned interfaces on your system."
-msgstr ""
+msgstr "هیچ رابط اختصاص داده نشده بر روی سیستم شما وجود ندارد."
 
 #: netstuff.c:732
 #, c-format
 msgid "Do you really want to remove the assigned %s interface?"
-msgstr ""
+msgstr "آیا شما واقعا می خواهید اینترفیس %s  اختصاص داده شده را پاک کنید؟"
 
 #: netstuff.c:755
 msgid "Select network driver"
@@ -344,35 +345,35 @@ msgstr "گزینش راه انداز شبکه"
 
 #: netstuff.c:755
 msgid "Set additional module parameters"
-msgstr ""
+msgstr "پیکربندی پارامترهای افزوده ماژول"
 
 #: netstuff.c:762
 msgid "Loading module..."
-msgstr ""
+msgstr "بارگذاری ماژول..."
 
 #: netstuff.c:777
 msgid "Unable to load driver module."
-msgstr ""
+msgstr "نمی توان راه انداز ماژول را بارگذاری کرد."
 
 #: netstuff.c:780
 msgid "Module name cannot be blank."
-msgstr ""
+msgstr "نام ماژول نمی تواند پوچ باشد."
 
 #: networking.c:110
 msgid "Stopping network..."
-msgstr ""
+msgstr "از کار انداختن شبکه..."
 
 #: networking.c:115
 msgid "Restarting network..."
-msgstr ""
+msgstr "شروع دوباره شبکه..."
 
 #: networking.c:146
 msgid "No GREEN interface assigned."
-msgstr ""
+msgstr "به اینترفیس سبز میزانی داده نشده است."
 
 #: networking.c:152
 msgid "Missing an IP address on GREEN."
-msgstr ""
+msgstr "آدرس IP بر روی سبز یافت نشد."
 
 #: networking.c:163
 msgid "Error"
@@ -384,43 +385,43 @@ msgstr "نادیده گرفتن"
 
 #: networking.c:164
 msgid "No RED interface assigned."
-msgstr ""
+msgstr "برای اینترفیس قرمز میزانی داده نشده است."
 
 #: networking.c:173
 msgid "Missing an IP address on RED."
-msgstr ""
+msgstr "آدرس IP بر روی قرمز یافت نشد."
 
 #: networking.c:183
 msgid "No ORANGE interface assigned."
-msgstr ""
+msgstr "برای اینترفیس نارنجی میزانی داده نشده است."
 
 #: networking.c:189
 msgid "Missing an IP address on ORANGE."
-msgstr ""
+msgstr "آدرس IP بر روی نارنجی یافت نشد."
 
 #: networking.c:199
 msgid "No BLUE interface assigned."
-msgstr ""
+msgstr "برای اینترفیس آبی میزانی داده نشده است."
 
 #: networking.c:205
 msgid "Missing an IP address on BLUE."
-msgstr ""
+msgstr "آدرس IP بر روی آبی یافت نشد."
 
 #: networking.c:217
 msgid "Misssing DNS."
-msgstr ""
+msgstr "DNS یافت نشد."
 
 #: networking.c:224
 msgid "Missing Default Gateway."
-msgstr ""
+msgstr "Gateway پیش پندار یافت نشد."
 
 #: networking.c:237 networking.c:304
 msgid "Network configuration type"
-msgstr ""
+msgstr "چگونگی پیکربندی شبکه"
 
 #: networking.c:238 networking.c:409
 msgid "Drivers and card assignments"
-msgstr ""
+msgstr "راه انداز ها و تکالیف کارت ها"
 
 #: networking.c:239 networking.c:640
 msgid "Address settings"
@@ -428,11 +429,11 @@ msgstr "پیکربندی آدرس"
 
 #: networking.c:240 networking.c:743
 msgid "DNS and Gateway settings"
-msgstr ""
+msgstr "پیکربندی DNS و Gateway"
 
 #: networking.c:260
 msgid "When configuration is complete, a network restart will be required."
-msgstr ""
+msgstr "وقتی پیکربندی کامل شد سرویس شبکه در صورت نیاز راه اندازی مجدد خواهد شد"
 
 #: networking.c:267
 #, c-format
@@ -440,11 +441,11 @@ msgid ""
 "Current config: %s\n"
 "\n"
 "%s"
-msgstr ""
+msgstr "پیکربندی جاری: %s\n\n%s"
 
 #: networking.c:268
 msgid "Network configuration menu"
-msgstr ""
+msgstr "منوی پیکربندی شبکه"
 
 #: networking.c:269 networking.c:520 networking.c:642
 msgid "Done"
@@ -457,7 +458,7 @@ msgid ""
 "list those interfaces which have ethernet attached. If you change this "
 "setting, a network restart will be required, and you will have to "
 "reconfigure the network driver assignments."
-msgstr ""
+msgstr "پیکربندی شبکه برای %s را گزینش کنید. لیست روش های پیکربندی زیر آن اینترفیس ها، وقتیکه به شبکه متصل شده اند. اگر شما پیکربندی را دگرگون سازید، یک شبکه نیاز به خاموش روشن دارد، و شما راه انداز شبکه اختصاص داده شده را دوباره پیکربندی کنید."
 
 #: networking.c:307
 #, c-format
@@ -465,31 +466,31 @@ msgid ""
 "Not enough netcards for your choice.\n"
 "\n"
 "Needed: %d - Available: %d\n"
-msgstr ""
+msgstr "کارتهای شبکه برای گزینش شما کافی نیست.\n\nنیازمند: %d - در دسترس: %d\n"
 
 #: networking.c:359
 msgid ""
 "Configure network drivers, and which interface each card is assigned to. The current configuration is as follows:\n"
 "\n"
-msgstr ""
+msgstr "پیکربندی راه اندازهای شبکه، که به اینترفیس هر کارت اختصاص داده شده است. پیکربندی کنونی در زیر آمده است:\n\n"
 
 #: networking.c:408
 msgid "Do you wish to change these settings?"
-msgstr ""
+msgstr "ایا قصد دارید این تنظیمات تغییر دهید؟"
 
 #: networking.c:447
 msgid "Restarting non-local network..."
-msgstr ""
+msgstr "شروع دوباره شبکه..."
 
 #: networking.c:464
 msgid ""
 "Please choose the interface you wish to change.\n"
 "\n"
-msgstr ""
+msgstr "خواهشمند است اینترفیسی را که می خواهید دگرگون سازید را گزینش کنید.\n\n"
 
 #: networking.c:519
 msgid "Assigned Cards"
-msgstr ""
+msgstr "کارت های واگذار شده"
 
 #: networking.c:520
 msgid "Remove"
@@ -502,11 +503,11 @@ msgid ""
 "connection to the %s machine will be broken, and you will have to reconnect "
 "on the new IP. This is a risky operation, and should only be attempted if "
 "you have physical access to the machine, should something go wrong."
-msgstr ""
+msgstr "اگر شما این IP را تغییر دهید، و شما از راه ریموت وارد شده باشید، اتصال شما به سیستم %s شکسته می شود، و شما با IP جدید دوباره وصل شوید. این کار شما، ریسک دارد، و فقط باید دسترسی فیزیکی به سیستم داشته باشید، این کار شما اشتباه است."
 
 #: networking.c:641
 msgid "Select the interface you wish to reconfigure."
-msgstr ""
+msgstr "اینترفیس که قصد پیکربندی مجدد را دارید انتخاب کنید"
 
 #: networking.c:729
 msgid "Default gateway:"
@@ -516,7 +517,7 @@ msgstr "Gateway پیش پندار:"
 msgid ""
 "Enter the DNS and gateway information. These settings are used only with "
 "Static IP (and DHCP if DNS set) on the RED interface."
-msgstr ""
+msgstr "اطلاعات gateway و DNS را بنویسید. این پیکربندی ها فقط با IP استاتیک (و DHCP اگر DNS نوشته شده باشد) بر روی اینترفیس قرمز بکار می روند."
 
 #: networking.c:773
 msgid "Default gateway"
@@ -524,12 +525,12 @@ msgstr "Gateway پیش پندار"
 
 #: networking.c:780
 msgid "Secondary DNS specified without a Primary DNS"
-msgstr ""
+msgstr "دومین DNS بدون پیکربندی نخستین DNS"
 
 #: passwords.c:33
 msgid ""
 "Enter the 'root' user password. Login as this user for commandline access."
-msgstr ""
+msgstr "رمز عبور کاربر ریشه را وارد کنید.این کاربر سطح دسترسی خط فرمان را فراهم میکند"
 
 #: passwords.c:38 passwords.c:61
 msgid "Setting password"
@@ -548,7 +549,7 @@ msgstr "ایراد در پیکربندی گذواژه 'root'."
 msgid ""
 "Enter %s 'admin' user password. This is the user to use for logging into the"
 " %s web administration pages."
-msgstr ""
+msgstr "گذرواژه کاربر 'admin' %s را بنویسید. این کاربر برای ورود به برگه مدیریت وب %s می باشد."
 
 #: passwords.c:60
 #, c-format
@@ -558,7 +559,7 @@ msgstr "پیکربندی %s 'admin' گذر واژه کاربر..."
 #: passwords.c:62
 #, c-format
 msgid "Problem setting %s 'admin' user password."
-msgstr ""
+msgstr "ایراد در پیکربندی %s گذر واژه کاربر 'admin'"
 
 #: passwords.c:76
 msgid "Password:"
@@ -582,4 +583,4 @@ msgstr "در گذر واژه نمی توان فاصله گذاشت."
 
 #: timezone.c:77
 msgid "Choose the timezone you are in from the list below."
-msgstr ""
+msgstr " از لیست منطقه زمانی خود را انتخاب کنید"

diff --git a/src/setup/po/fr.po b/src/setup/po/fr.po
index 914095d30faccb2b42744ca3b3e5db34b172b234..eb04ad4fd24efeda0bf2f055bb16bf8c3996d65f 100644 (file)
--- a/src/setup/po/fr.po
+++ b/src/setup/po/fr.po
@@ -3,13 +3,14 @@
 # This file is distributed under the same license as the PACKAGE package.
 # 
 # Translators:
+# irenee Munyaneza <muirenee@yahoo.fr>, 2014
 msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2014-08-21 15:12+0000\n"
-"PO-Revision-Date: 2014-08-21 15:13+0000\n"
-"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"PO-Revision-Date: 2014-10-06 16:32+0000\n"
+"Last-Translator: irenee Munyaneza <muirenee@yahoo.fr>\n"
 "Language-Team: French (http://www.transifex.com/projects/p/ipfire/language/fr/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -78,7 +79,7 @@ msgstr ""
 #: networking.c:410 networking.c:560 networking.c:653 networking.c:746
 #: passwords.c:89 timezone.c:78
 msgid "Cancel"
-msgstr ""
+msgstr "Annuler"
 
 #: dhcp.c:156
 msgid ""
@@ -112,7 +113,7 @@ msgstr ""
 
 #: domainname.c:42 main.c:70
 msgid "Domain name"
-msgstr ""
+msgstr "Nom de domaine"
 
 #: domainname.c:42
 msgid "Enter Domain name"
@@ -200,7 +201,7 @@ msgstr ""
 
 #: main.c:174 netstuff.c:733 networking.c:560 networking.c:653
 msgid "Warning"
-msgstr ""
+msgstr "Avertissement"
 
 #: main.c:175
 msgid ""
@@ -273,7 +274,7 @@ msgstr ""
 
 #: netstuff.c:134
 msgid "IP address:"
-msgstr ""
+msgstr "Adresse IP"
 
 #: netstuff.c:146
 msgid "Network mask:"
@@ -285,7 +286,7 @@ msgstr ""
 
 #: netstuff.c:183
 msgid "IP address"
-msgstr ""
+msgstr "Adresse IP"
 
 #: netstuff.c:189
 msgid "Network mask"
@@ -355,7 +356,7 @@ msgstr ""
 
 #: netstuff.c:780
 msgid "Module name cannot be blank."
-msgstr ""
+msgstr "Le nom du module ne doit pas être vide"
 
 #: networking.c:110
 msgid "Stopping network..."
@@ -375,7 +376,7 @@ msgstr ""
 
 #: networking.c:163
 msgid "Error"
-msgstr ""
+msgstr "Erreur"
 
 #: networking.c:163
 msgid "Ignore"
@@ -423,7 +424,7 @@ msgstr ""
 
 #: networking.c:239 networking.c:640
 msgid "Address settings"
-msgstr ""
+msgstr "Configuration d'adresse"
 
 #: networking.c:240 networking.c:743
 msgid "DNS and Gateway settings"
@@ -443,7 +444,7 @@ msgstr ""
 
 #: networking.c:268
 msgid "Network configuration menu"
-msgstr ""
+msgstr "Menu de configuration Reseau"
 
 #: networking.c:269 networking.c:520 networking.c:642
 msgid "Done"
@@ -488,7 +489,7 @@ msgstr ""
 
 #: networking.c:519
 msgid "Assigned Cards"
-msgstr ""
+msgstr "Cartes attribuées"
 
 #: networking.c:520
 msgid "Remove"
@@ -509,7 +510,7 @@ msgstr ""
 
 #: networking.c:729
 msgid "Default gateway:"
-msgstr ""
+msgstr "Passerelle par defaut"
 
 #: networking.c:744
 msgid ""
@@ -519,7 +520,7 @@ msgstr ""
 
 #: networking.c:773
 msgid "Default gateway"
-msgstr ""
+msgstr "Passerelle par défaut"
 
 #: networking.c:780
 msgid "Secondary DNS specified without a Primary DNS"
@@ -532,7 +533,7 @@ msgstr ""
 
 #: passwords.c:38 passwords.c:61
 msgid "Setting password"
-msgstr ""
+msgstr "Configuration du mot de passe"
 
 #: passwords.c:38
 msgid "Setting 'root' password...."
@@ -561,15 +562,15 @@ msgstr ""
 
 #: passwords.c:76
 msgid "Password:"
-msgstr ""
+msgstr "Mot de passe"
 
 #: passwords.c:77
 msgid "Again:"
-msgstr ""
+msgstr "Encore"
 
 #: passwords.c:95
 msgid "Password cannot be blank."
-msgstr ""
+msgstr "Le mot de passe ne doit pas être vide"
 
 #: passwords.c:102
 msgid "Passwords do not match."
@@ -577,7 +578,7 @@ msgstr ""
 
 #: passwords.c:109
 msgid "Password cannot contain spaces."
-msgstr ""
+msgstr "Le mot de passe ne doit pas contenir des espaces"
 
 #: timezone.c:77
 msgid "Choose the timezone you are in from the list below."

diff --git a/src/setup/po/hr.po b/src/setup/po/hr.po
new file mode 100644 (file)
index 0000000..3ecc4d3
--- /dev/null
+++ b/src/setup/po/hr.po
@@ -0,0 +1,584 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR The IPFire Project (www.ipfire.org)
+# This file is distributed under the same license as the PACKAGE package.
+# 
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: IPFire Project\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-08-21 15:12+0000\n"
+"PO-Revision-Date: 2014-10-31 14:31+0000\n"
+"Last-Translator: Blago Culjak <blago.culjak@hotmail.com>\n"
+"Language-Team: Croatian (http://www.transifex.com/projects/p/ipfire/language/hr/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: hr\n"
+"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
+
+#: dhcp.c:50
+msgid "Start address:"
+msgstr "Početna adresa:"
+
+#: dhcp.c:51
+msgid "End address:"
+msgstr "Krajna adresa:"
+
+#: dhcp.c:52 networking.c:717
+msgid "Primary DNS:"
+msgstr "Primarni DNS:"
+
+#: dhcp.c:53 networking.c:723
+msgid "Secondary DNS:"
+msgstr "Sekundarni DNS:"
+
+#: dhcp.c:54
+msgid "Default lease (mins):"
+msgstr "Zadani zakup (min):"
+
+#: dhcp.c:55
+msgid "Max lease (mins):"
+msgstr "Max zakup (min):"
+
+#: dhcp.c:56
+msgid "Domain name suffix:"
+msgstr "Sufiks naziva domene:"
+
+#: dhcp.c:86 dhcp.c:93 dhcp.c:101 domainname.c:34 hostname.c:37 keymap.c:70
+#: misc.c:40 misc.c:52 netstuff.c:377 netstuff.c:566 netstuff.c:704
+#: networking.c:134 networking.c:255 networking.c:291 networking.c:346
+#: networking.c:442 networking.c:552 networking.c:603 networking.c:610
+#: networking.c:713 timezone.c:63
+msgid "Unable to open settings file"
+msgstr "Nije moguće otvoriti datoteku s postavkama"
+
+#: dhcp.c:111
+msgid "DHCP server configuration"
+msgstr "Konfiguracija DHCP poslužitelja"
+
+#: dhcp.c:116
+msgid "Configure the DHCP server by entering the settings information."
+msgstr "Konfiguracija DHCP poslužitelj s unosom postavki."
+
+#: dhcp.c:125
+msgid "Enabled"
+msgstr "Omogućeno"
+
+#: dhcp.c:142 domainname.c:43 hostname.c:47 keymap.c:86 main.c:99 main.c:172
+#: main.c:174 netstuff.c:157 netstuff.c:733 netstuff.c:756 networking.c:163
+#: networking.c:269 networking.c:305 networking.c:409 networking.c:560
+#: networking.c:642 networking.c:653 networking.c:746 passwords.c:89
+#: timezone.c:78
+msgid "OK"
+msgstr "OK"
+
+#: dhcp.c:143 domainname.c:43 hostname.c:47 keymap.c:86 netstuff.c:158
+#: netstuff.c:673 netstuff.c:733 netstuff.c:756 networking.c:305
+#: networking.c:410 networking.c:560 networking.c:653 networking.c:746
+#: passwords.c:89 timezone.c:78
+msgid "Cancel"
+msgstr "Otkazati"
+
+#: dhcp.c:156
+msgid ""
+"The following fields are invalid:\n"
+"\n"
+msgstr "Sljedeća polja su nevažeća:\n\n"
+
+#: dhcp.c:159
+msgid "Start address"
+msgstr "Početna adresa"
+
+#: dhcp.c:165
+msgid "End address"
+msgstr "Završna adresa"
+
+#: dhcp.c:173 networking.c:755
+msgid "Primary DNS"
+msgstr "Primarni DNS"
+
+#: dhcp.c:182 networking.c:764
+msgid "Secondary DNS"
+msgstr "Sekundarni DNS"
+
+#: dhcp.c:189
+msgid "Default lease time"
+msgstr "Zadano vrijeme zakupa"
+
+#: dhcp.c:195
+msgid "Max. lease time"
+msgstr "Max. vrijeme zakupa"
+
+#: domainname.c:42 main.c:70
+msgid "Domain name"
+msgstr "Naziv domene"
+
+#: domainname.c:42
+msgid "Enter Domain name"
+msgstr "Unesite naziv domene"
+
+#: domainname.c:48
+msgid "Domain name cannot be empty."
+msgstr "Naziv domene ne smije biti prazan."
+
+#: domainname.c:50
+msgid "Domain name cannot contain spaces."
+msgstr "Naziv domene ne smije sadržavati razmake."
+
+#: domainname.c:53
+msgid "Domain name may only contain letters, numbers, hyphens and periods."
+msgstr "Naziv domene može sadržavati samo slova, brojeve, crtice i točkice."
+
+#: hostname.c:46 main.c:69
+msgid "Hostname"
+msgstr "Ime računala"
+
+#: hostname.c:46
+msgid "Enter the machine's hostname."
+msgstr "Upišite naziv računala."
+
+#: hostname.c:53
+msgid "Hostname cannot be empty."
+msgstr "Naziv računala ne može biti prazan."
+
+#: hostname.c:55
+msgid "Hostname cannot contain spaces."
+msgstr "Naziv računala ne može sadržavati razmake."
+
+#: hostname.c:58
+msgid "Hostname may only contain letters, numbers and hyphens."
+msgstr "Naziv računala može sadržavati samo slova, brojeve i crtice."
+
+#: keymap.c:84 main.c:67
+msgid "Keyboard mapping"
+msgstr "Vrsta tipkovnice"
+
+#: keymap.c:85
+msgid "Choose the type of keyboard you are using from the list below."
+msgstr "Izaberite vrstu tipkovnice koju koristite s popisa u nastavku."
+
+#: main.c:68 timezone.c:77
+msgid "Timezone"
+msgstr "Vremenska zona"
+
+#: main.c:71 networking.c:110 networking.c:115 networking.c:447
+msgid "Networking"
+msgstr "Mreža"
+
+#: main.c:72 misc.c:147
+msgid "ISDN"
+msgstr "ISDN"
+
+#: main.c:73
+msgid "'root' password"
+msgstr "'root' lozinka"
+
+#: main.c:74
+msgid "'admin' password"
+msgstr "'admin' lozinka"
+
+#: main.c:90
+msgid "              <Tab>/<Alt-Tab> between elements   |  <Space> selects"
+msgstr "              <Tab>/<Alt-Tab> odabiranje drugih opcija  |  <Space> Izaberi"
+
+#: main.c:97
+msgid "Section menu"
+msgstr "Izbornik"
+
+#: main.c:98
+msgid "Select the item you wish to configure."
+msgstr "Odaberite stavku koju želite konfigurirati."
+
+#: main.c:99
+msgid "Quit"
+msgstr "Odustati"
+
+#: main.c:172
+msgid "Setup is complete."
+msgstr "Podešavanje je dovršeno."
+
+#: main.c:174 netstuff.c:733 networking.c:560 networking.c:653
+msgid "Warning"
+msgstr "Upozorenje"
+
+#: main.c:175
+msgid ""
+"Initial setup was not entirely complete. You must ensure that Setup is "
+"properly finished by running setup again at the shell."
+msgstr "Početno postavljanje nije u potpunosti završeno. Morate završiti postavljanje prije ponovnog postavljanja u shellu."
+
+#: misc.c:62
+#, c-format
+msgid "Unable to write %s/main/hostname.conf"
+msgstr "Nije moguće zapisati %s/main/hostname.conf"
+
+#: misc.c:71
+msgid "Unable to open main hosts file."
+msgstr "Nije moguće otvoriti glavnu hosts datoteku."
+
+#: misc.c:76
+msgid "Unable to write /etc/hosts."
+msgstr "Nije moguće zapisati /etc/hosts."
+
+#: misc.c:117
+msgid "Unable to write /etc/hosts.deny."
+msgstr "Nije moguće zapisati /etc/hosts.deny"
+
+#: misc.c:125
+msgid "Unable to write /etc/hosts.allow."
+msgstr "Nije moguće zapisati /etc/hosts.allow."
+
+#: misc.c:136
+msgid "Unable to set hostname."
+msgstr "Nije moguće postaviti naziv računala (hostname)."
+
+#: misc.c:147
+msgid "Scanning and configuring ISDN devices."
+msgstr "Skeniranje i postavljanje ISDN uređaja."
+
+#: misc.c:148
+msgid "Unable to scan for ISDN devices."
+msgstr "Nije moguće skenirati ISDN uređaj."
+
+#: netstuff.c:86
+#, c-format
+msgid "Interface - %s"
+msgstr "Sučelje - %s"
+
+#: netstuff.c:91
+#, c-format
+msgid "Enter the IP address information for the %s interface."
+msgstr "Unesite podatke o IP adresi za %s sučelje."
+
+#: netstuff.c:103
+msgid "Static"
+msgstr "Statička"
+
+#: netstuff.c:104
+msgid "DHCP"
+msgstr "DHCP"
+
+#: netstuff.c:105
+msgid "PPP DIALUP (PPPoE, modem, ATM ...)"
+msgstr "PPP DIALUP (PPPoE, modem, ATM ...)"
+
+#: netstuff.c:113
+msgid "DHCP Hostname:"
+msgstr "DHCP naziv računala:"
+
+#: netstuff.c:115
+msgid "Force DHCP MTU:"
+msgstr "Prisili DHCP MTU:"
+
+#: netstuff.c:134
+msgid "IP address:"
+msgstr "IP adresa:"
+
+#: netstuff.c:146
+msgid "Network mask:"
+msgstr "Mreža maska:"
+
+#: netstuff.c:173 networking.c:749
+msgid "The following fields are invalid:"
+msgstr "Sljedeća polja su nevažeća:"
+
+#: netstuff.c:183
+msgid "IP address"
+msgstr "IP adresa"
+
+#: netstuff.c:189
+msgid "Network mask"
+msgstr "Mreža maska"
+
+#: netstuff.c:198
+msgid "DHCP hostname"
+msgstr "DHCP naziv računala"
+
+#: netstuff.c:396 netstuff.c:709
+msgid "Unset"
+msgstr "Nije postavljeno"
+
+#: netstuff.c:669
+#, c-format
+msgid "Please choose a networkcard for the following interface - %s."
+msgstr "Odaberite mrežnu karticu za sučelje - %s."
+
+#: netstuff.c:672
+msgid "Extended Network Menu"
+msgstr "Dodatni izbornik mreže"
+
+#: netstuff.c:673 networking.c:520
+msgid "Select"
+msgstr "Odabrati"
+
+#: netstuff.c:673
+msgid "Identify"
+msgstr "Identificirati"
+
+#: netstuff.c:678
+msgid "Device Identification"
+msgstr "Identifikacija uređaja"
+
+#: netstuff.c:678
+msgid "The lights on the selected port should flash now for 10 seconds..."
+msgstr "Svjetla na odabranom ulazu bi trebala bljeskati 10 sekundi..."
+
+#: netstuff.c:679
+msgid "Identification is not supported by this interface."
+msgstr "Identifikacija ne podržava ovo sučelje."
+
+#: netstuff.c:691
+msgid "There are no unassigned interfaces on your system."
+msgstr "Nema dodijeljenih sučelja na vašem sustavu."
+
+#: netstuff.c:732
+#, c-format
+msgid "Do you really want to remove the assigned %s interface?"
+msgstr "Da li stvarno želite ukloniti dodijeljeno %s sučelje?"
+
+#: netstuff.c:755
+msgid "Select network driver"
+msgstr "Odaberite mrežni driver"
+
+#: netstuff.c:755
+msgid "Set additional module parameters"
+msgstr "Postavite dodatne parametre modula"
+
+#: netstuff.c:762
+msgid "Loading module..."
+msgstr "Očitavam modul..."
+
+#: netstuff.c:777
+msgid "Unable to load driver module."
+msgstr "Nije moguće učitati upravljački modul."
+
+#: netstuff.c:780
+msgid "Module name cannot be blank."
+msgstr "Naziv modula ne može biti prazan."
+
+#: networking.c:110
+msgid "Stopping network..."
+msgstr "Zaustavljanje mreže..."
+
+#: networking.c:115
+msgid "Restarting network..."
+msgstr "Ponovno pokretanje mreže..."
+
+#: networking.c:146
+msgid "No GREEN interface assigned."
+msgstr "Nije dodijeljeno GREEN sučelje."
+
+#: networking.c:152
+msgid "Missing an IP address on GREEN."
+msgstr "Nedostaje IP adresa na GREEN sučelju."
+
+#: networking.c:163
+msgid "Error"
+msgstr "Pogreška"
+
+#: networking.c:163
+msgid "Ignore"
+msgstr "Ignorirati"
+
+#: networking.c:164
+msgid "No RED interface assigned."
+msgstr "Nije dodijeljeno RED sučelje."
+
+#: networking.c:173
+msgid "Missing an IP address on RED."
+msgstr "Nedostaje IP adresu na RED sučelju."
+
+#: networking.c:183
+msgid "No ORANGE interface assigned."
+msgstr "Nije dodijeljeno ORANGE sučelje."
+
+#: networking.c:189
+msgid "Missing an IP address on ORANGE."
+msgstr "Nedostaje IP adresu na Orange sučelju."
+
+#: networking.c:199
+msgid "No BLUE interface assigned."
+msgstr "Nije dodijeljeno BLUE sučelje."
+
+#: networking.c:205
+msgid "Missing an IP address on BLUE."
+msgstr "Nedostaje IP adresu na BLUE sučelju."
+
+#: networking.c:217
+msgid "Misssing DNS."
+msgstr "Nedostaje DNS."
+
+#: networking.c:224
+msgid "Missing Default Gateway."
+msgstr "Nedostaje Zadani Gateway."
+
+#: networking.c:237 networking.c:304
+msgid "Network configuration type"
+msgstr "Tip mrežnih postavki"
+
+#: networking.c:238 networking.c:409
+msgid "Drivers and card assignments"
+msgstr "Driveri i dodjele kartice"
+
+#: networking.c:239 networking.c:640
+msgid "Address settings"
+msgstr "Postavke adresa"
+
+#: networking.c:240 networking.c:743
+msgid "DNS and Gateway settings"
+msgstr "DNS i Gateway postavke"
+
+#: networking.c:260
+msgid "When configuration is complete, a network restart will be required."
+msgstr "Kad konfiguracija je završi, ponovno pokretanje mreže je obvezno."
+
+#: networking.c:267
+#, c-format
+msgid ""
+"Current config: %s\n"
+"\n"
+"%s"
+msgstr "Trenutna konfiguracija:%s\n\n%s"
+
+#: networking.c:268
+msgid "Network configuration menu"
+msgstr "Izbornik postavki mreže"
+
+#: networking.c:269 networking.c:520 networking.c:642
+msgid "Done"
+msgstr "Završeno"
+
+#: networking.c:300
+#, c-format
+msgid ""
+"Select the network configuration for %s. The following configuration types "
+"list those interfaces which have ethernet attached. If you change this "
+"setting, a network restart will be required, and you will have to "
+"reconfigure the network driver assignments."
+msgstr "Odaberite konfiguraciju mreže za %s. Sljedeća lista su vrste postavki onih Ethernet sučelja koja su dodana. Ako promijenite ovu postavku, ponovno pokretanje mreže će biti potrebno, a vi ćete morati ponovno dodijeliti mrežne drivere."
+
+#: networking.c:307
+#, c-format
+msgid ""
+"Not enough netcards for your choice.\n"
+"\n"
+"Needed: %d - Available: %d\n"
+msgstr "Nema dovoljno nmrežnih kartica za vaš izbor.\n\nPotrebno: %d - Dostupno: %d\n"
+
+#: networking.c:359
+msgid ""
+"Configure network drivers, and which interface each card is assigned to. The current configuration is as follows:\n"
+"\n"
+msgstr "Konfiguracija mrežnih upravljačkih programa, svakome sučelju kojemu kartica je dodijeljena. Trenutna konfiguracija: \n\n"
+
+#: networking.c:408
+msgid "Do you wish to change these settings?"
+msgstr "Želite li promijeniti ove postavke?"
+
+#: networking.c:447
+msgid "Restarting non-local network..."
+msgstr "Ponovno pokretanje ne-lokalne mreže ..."
+
+#: networking.c:464
+msgid ""
+"Please choose the interface you wish to change.\n"
+"\n"
+msgstr "Odaberite sučelje koje želite promijeniti. \n\n"
+
+#: networking.c:519
+msgid "Assigned Cards"
+msgstr "Dodijeljene kartice"
+
+#: networking.c:520
+msgid "Remove"
+msgstr "Ukloniti"
+
+#: networking.c:556 networking.c:649
+#, c-format
+msgid ""
+"If you change this IP address, and you are logged in remotely, your "
+"connection to the %s machine will be broken, and you will have to reconnect "
+"on the new IP. This is a risky operation, and should only be attempted if "
+"you have physical access to the machine, should something go wrong."
+msgstr "Ako promijenite ovu IP adresu, i ako ste prijavljeni udaljeno, vaša veza s %s će biti prekinuta, a vi ćete morati ponovno povezati na novu IP adresu. Pošto je ovo rizično, te bi trebali ovo raditi samo ako imate fizički pristup uređaju, ako nešto pođe krivo."
+
+#: networking.c:641
+msgid "Select the interface you wish to reconfigure."
+msgstr "Izaberite sučelje koje želite ponovo konfigurirati."
+
+#: networking.c:729
+msgid "Default gateway:"
+msgstr "Zadani pristupnik (gateway):"
+
+#: networking.c:744
+msgid ""
+"Enter the DNS and gateway information. These settings are used only with "
+"Static IP (and DHCP if DNS set) on the RED interface."
+msgstr "Unesite DNS i gateway informacije. Ove postavke se koristite samo s Statičkim IP-om (i DHCP ako je DNS postavljen) na RED sučelju."
+
+#: networking.c:773
+msgid "Default gateway"
+msgstr "Zadani pristupnik (gateway):"
+
+#: networking.c:780
+msgid "Secondary DNS specified without a Primary DNS"
+msgstr "Sekundarni DNS je naveden bez Primarnog DNSa"
+
+#: passwords.c:33
+msgid ""
+"Enter the 'root' user password. Login as this user for commandline access."
+msgstr "Unesite 'root' lozinku. Prijavite se kao ovoj korisnik za Commandline pristup."
+
+#: passwords.c:38 passwords.c:61
+msgid "Setting password"
+msgstr "Postavljanje lozinke"
+
+#: passwords.c:38
+msgid "Setting 'root' password...."
+msgstr "Postavljanje 'root' lozinke...."
+
+#: passwords.c:39
+msgid "Problem setting 'root' password."
+msgstr "Problem s postavljanjem 'root' lozinke."
+
+#: passwords.c:53
+#, c-format
+msgid ""
+"Enter %s 'admin' user password. This is the user to use for logging into the"
+" %s web administration pages."
+msgstr "Upišite %s 'admin' lozinku. To je korisnik koji se prijavljiva na %s web sučelje za administraciju."
+
+#: passwords.c:60
+#, c-format
+msgid "Setting %s 'admin' user password..."
+msgstr "Postavljanje %s 'admin' korisničke lozinke ..."
+
+#: passwords.c:62
+#, c-format
+msgid "Problem setting %s 'admin' user password."
+msgstr "Problem postavljanja %s 'admin' korisničke lozinke."
+
+#: passwords.c:76
+msgid "Password:"
+msgstr "Lozinka:"
+
+#: passwords.c:77
+msgid "Again:"
+msgstr "Ponovno:"
+
+#: passwords.c:95
+msgid "Password cannot be blank."
+msgstr "Lozinka ne može biti prazna."
+
+#: passwords.c:102
+msgid "Passwords do not match."
+msgstr "Lozinke se ne podudaraju."
+
+#: passwords.c:109
+msgid "Password cannot contain spaces."
+msgstr "Lozinka ne može sadržavati razmak."
+
+#: timezone.c:77
+msgid "Choose the timezone you are in from the list below."
+msgstr "Odaberite vremensku zonu u kojoj se nalazite na popisu."

diff --git a/src/setup/po/it.po b/src/setup/po/it.po
index 8f14b3751f476211a6b02c8cf1d8ba5d9e72e08f..778a65ee3652cafb774fa36369ba2ed4e09f0845 100644 (file)
--- a/src/setup/po/it.po
+++ b/src/setup/po/it.po
@@ -3,13 +3,15 @@
 # This file is distributed under the same license as the PACKAGE package.
 # 
 # Translators:
+# luX <lucianocataldo@gmail.com>, 2014
+# Mario <mc9085@mclink.it>, 2014
 msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2014-08-21 15:12+0000\n"
-"PO-Revision-Date: 2014-08-21 15:13+0000\n"
-"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"PO-Revision-Date: 2014-09-30 13:22+0000\n"
+"Last-Translator: Mario <mc9085@mclink.it>\n"
 "Language-Team: Italian (http://www.transifex.com/projects/p/ipfire/language/it/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -19,31 +21,31 @@ msgstr ""
 
 #: dhcp.c:50
 msgid "Start address:"
-msgstr ""
+msgstr "Indirizzo iniziale:"
 
 #: dhcp.c:51
 msgid "End address:"
-msgstr ""
+msgstr "Indirizzo finale:"
 
 #: dhcp.c:52 networking.c:717
 msgid "Primary DNS:"
-msgstr ""
+msgstr "DNS primario:"
 
 #: dhcp.c:53 networking.c:723
 msgid "Secondary DNS:"
-msgstr ""
+msgstr "DNS secondario:"
 
 #: dhcp.c:54
 msgid "Default lease (mins):"
-msgstr ""
+msgstr "Durata di Default del lease (min):"
 
 #: dhcp.c:55
 msgid "Max lease (mins):"
-msgstr ""
+msgstr "Durata massima del lease (min):"
 
 #: dhcp.c:56
 msgid "Domain name suffix:"
-msgstr ""
+msgstr "Suffisso del nome di Dominio:"
 
 #: dhcp.c:86 dhcp.c:93 dhcp.c:101 domainname.c:34 hostname.c:37 keymap.c:70
 #: misc.c:40 misc.c:52 netstuff.c:377 netstuff.c:566 netstuff.c:704
@@ -51,19 +53,19 @@ msgstr ""
 #: networking.c:442 networking.c:552 networking.c:603 networking.c:610
 #: networking.c:713 timezone.c:63
 msgid "Unable to open settings file"
-msgstr ""
+msgstr "Impossibile aprire il file delle impostazioni"
 
 #: dhcp.c:111
 msgid "DHCP server configuration"
-msgstr ""
+msgstr "Configurazione server DHCP"
 
 #: dhcp.c:116
 msgid "Configure the DHCP server by entering the settings information."
-msgstr ""
+msgstr "Configura il server DHCP immettendo le informazioni necessarie."
 
 #: dhcp.c:125
 msgid "Enabled"
-msgstr ""
+msgstr "Abilitato"
 
 #: dhcp.c:142 domainname.c:43 hostname.c:47 keymap.c:86 main.c:99 main.c:172
 #: main.c:174 netstuff.c:157 netstuff.c:733 netstuff.c:756 networking.c:163
@@ -71,367 +73,367 @@ msgstr ""
 #: networking.c:642 networking.c:653 networking.c:746 passwords.c:89
 #: timezone.c:78
 msgid "OK"
-msgstr ""
+msgstr "OK"
 
 #: dhcp.c:143 domainname.c:43 hostname.c:47 keymap.c:86 netstuff.c:158
 #: netstuff.c:673 netstuff.c:733 netstuff.c:756 networking.c:305
 #: networking.c:410 networking.c:560 networking.c:653 networking.c:746
 #: passwords.c:89 timezone.c:78
 msgid "Cancel"
-msgstr ""
+msgstr "Annulla"
 
 #: dhcp.c:156
 msgid ""
 "The following fields are invalid:\n"
 "\n"
-msgstr ""
+msgstr "I seguenti campi non sono validi:\n\n"
 
 #: dhcp.c:159
 msgid "Start address"
-msgstr ""
+msgstr "Indirizzo iniziale"
 
 #: dhcp.c:165
 msgid "End address"
-msgstr ""
+msgstr "Indirizzo finale"
 
 #: dhcp.c:173 networking.c:755
 msgid "Primary DNS"
-msgstr ""
+msgstr "DNS primario"
 
 #: dhcp.c:182 networking.c:764
 msgid "Secondary DNS"
-msgstr ""
+msgstr "DNS secondario"
 
 #: dhcp.c:189
 msgid "Default lease time"
-msgstr ""
+msgstr "Tempo di lease di Default"
 
 #: dhcp.c:195
 msgid "Max. lease time"
-msgstr ""
+msgstr "Tempo di lease massimo"
 
 #: domainname.c:42 main.c:70
 msgid "Domain name"
-msgstr ""
+msgstr "Nome di Dominio"
 
 #: domainname.c:42
 msgid "Enter Domain name"
-msgstr ""
+msgstr "Inserire il nome del Dominio"
 
 #: domainname.c:48
 msgid "Domain name cannot be empty."
-msgstr ""
+msgstr "Il nome di Dominio non può essere vuoto."
 
 #: domainname.c:50
 msgid "Domain name cannot contain spaces."
-msgstr ""
+msgstr "Il nome di dominio non può contenere spazi."
 
 #: domainname.c:53
 msgid "Domain name may only contain letters, numbers, hyphens and periods."
-msgstr ""
+msgstr "Il nome del Dominio può contenere solamente lettere, numeri, trattini e punti."
 
 #: hostname.c:46 main.c:69
 msgid "Hostname"
-msgstr ""
+msgstr "Nome host"
 
 #: hostname.c:46
 msgid "Enter the machine's hostname."
-msgstr ""
+msgstr "Inserire il nome host della macchina."
 
 #: hostname.c:53
 msgid "Hostname cannot be empty."
-msgstr ""
+msgstr "Il nome host non può essere vuoto."
 
 #: hostname.c:55
 msgid "Hostname cannot contain spaces."
-msgstr ""
+msgstr "Il nome host non può contenere spazi"
 
 #: hostname.c:58
 msgid "Hostname may only contain letters, numbers and hyphens."
-msgstr ""
+msgstr "Il nome host può contenere solo lettere, numeri e trattini."
 
 #: keymap.c:84 main.c:67
 msgid "Keyboard mapping"
-msgstr ""
+msgstr "Mappatura della tastiera"
 
 #: keymap.c:85
 msgid "Choose the type of keyboard you are using from the list below."
-msgstr ""
+msgstr "Scegli la configurazione della tua tastiera dalla lista sottostante."
 
 #: main.c:68 timezone.c:77
 msgid "Timezone"
-msgstr ""
+msgstr "Fuso orario"
 
 #: main.c:71 networking.c:110 networking.c:115 networking.c:447
 msgid "Networking"
-msgstr ""
+msgstr "Networking"
 
 #: main.c:72 misc.c:147
 msgid "ISDN"
-msgstr ""
+msgstr "ISDN"
 
 #: main.c:73
 msgid "'root' password"
-msgstr ""
+msgstr "Password di 'root'"
 
 #: main.c:74
 msgid "'admin' password"
-msgstr ""
+msgstr "Password di 'admin'"
 
 #: main.c:90
 msgid "              <Tab>/<Alt-Tab> between elements   |  <Space> selects"
-msgstr ""
+msgstr "<Tab>/<Alt-Tab> spostati tra gli elementi  | <Space> selezione"
 
 #: main.c:97
 msgid "Section menu"
-msgstr ""
+msgstr "Menu di sezione"
 
 #: main.c:98
 msgid "Select the item you wish to configure."
-msgstr ""
+msgstr "Scegli l'elemento che vuoi configurare."
 
 #: main.c:99
 msgid "Quit"
-msgstr ""
+msgstr "Abbandona"
 
 #: main.c:172
 msgid "Setup is complete."
-msgstr ""
+msgstr "L'installazione è completata."
 
 #: main.c:174 netstuff.c:733 networking.c:560 networking.c:653
 msgid "Warning"
-msgstr ""
+msgstr "Attenzione"
 
 #: main.c:175
 msgid ""
 "Initial setup was not entirely complete. You must ensure that Setup is "
 "properly finished by running setup again at the shell."
-msgstr ""
+msgstr "Il setup iniziale non è stato completato. Completa il Setup inserendo la stinga \"setup\" nella shell.  "
 
 #: misc.c:62
 #, c-format
 msgid "Unable to write %s/main/hostname.conf"
-msgstr ""
+msgstr "Impossibile scrivere %s/main/hostname.conf"
 
 #: misc.c:71
 msgid "Unable to open main hosts file."
-msgstr ""
+msgstr "Impossibile aprire il file hosts principale."
 
 #: misc.c:76
 msgid "Unable to write /etc/hosts."
-msgstr ""
+msgstr "Impossibile scrivere /etc/hosts."
 
 #: misc.c:117
 msgid "Unable to write /etc/hosts.deny."
-msgstr ""
+msgstr "Impossibile scrivere /etc/hosts.deny."
 
 #: misc.c:125
 msgid "Unable to write /etc/hosts.allow."
-msgstr ""
+msgstr "Impossibile scrivere /etc/hosts.allow."
 
 #: misc.c:136
 msgid "Unable to set hostname."
-msgstr ""
+msgstr "Impossibile impostare l'hostname."
 
 #: misc.c:147
 msgid "Scanning and configuring ISDN devices."
-msgstr ""
+msgstr "Scansionando e configurando i dispositivi ISDN."
 
 #: misc.c:148
 msgid "Unable to scan for ISDN devices."
-msgstr ""
+msgstr "Impossibile scansionare i dispositivi ISDN."
 
 #: netstuff.c:86
 #, c-format
 msgid "Interface - %s"
-msgstr ""
+msgstr "Interfaccia - %s"
 
 #: netstuff.c:91
 #, c-format
 msgid "Enter the IP address information for the %s interface."
-msgstr ""
+msgstr "Inserisci l'indirizzo IP per l'interfaccia %s."
 
 #: netstuff.c:103
 msgid "Static"
-msgstr ""
+msgstr "Statico"
 
 #: netstuff.c:104
 msgid "DHCP"
-msgstr ""
+msgstr "DHCP"
 
 #: netstuff.c:105
 msgid "PPP DIALUP (PPPoE, modem, ATM ...)"
-msgstr ""
+msgstr "PPP DIALUP (PPPoE, modem, ATM ...)"
 
 #: netstuff.c:113
 msgid "DHCP Hostname:"
-msgstr ""
+msgstr "DHCP Hostname:"
 
 #: netstuff.c:115
 msgid "Force DHCP MTU:"
-msgstr ""
+msgstr "Forza DHCP MTU:"
 
 #: netstuff.c:134
 msgid "IP address:"
-msgstr ""
+msgstr "Indirizzo IP:"
 
 #: netstuff.c:146
 msgid "Network mask:"
-msgstr ""
+msgstr "Maschera di rete:"
 
 #: netstuff.c:173 networking.c:749
 msgid "The following fields are invalid:"
-msgstr ""
+msgstr "I seguenti campi non sono validi:"
 
 #: netstuff.c:183
 msgid "IP address"
-msgstr ""
+msgstr "Indirizzo IP"
 
 #: netstuff.c:189
 msgid "Network mask"
-msgstr ""
+msgstr "Maschera di rete"
 
 #: netstuff.c:198
 msgid "DHCP hostname"
-msgstr ""
+msgstr "DHCP hostname"
 
 #: netstuff.c:396 netstuff.c:709
 msgid "Unset"
-msgstr ""
+msgstr "Non stabilito"
 
 #: netstuff.c:669
 #, c-format
 msgid "Please choose a networkcard for the following interface - %s."
-msgstr ""
+msgstr "Scegli una interfaccia di rete tra le seguenti  - %s."
 
 #: netstuff.c:672
 msgid "Extended Network Menu"
-msgstr ""
+msgstr "Menu di Rete esteso"
 
 #: netstuff.c:673 networking.c:520
 msgid "Select"
-msgstr ""
+msgstr "Selezionare"
 
 #: netstuff.c:673
 msgid "Identify"
-msgstr ""
+msgstr "Identificare"
 
 #: netstuff.c:678
 msgid "Device Identification"
-msgstr ""
+msgstr "Identificazione del dispositivo"
 
 #: netstuff.c:678
 msgid "The lights on the selected port should flash now for 10 seconds..."
-msgstr ""
+msgstr "I led della porta selezionata lampeggeranno ora per 10 secondi... "
 
 #: netstuff.c:679
 msgid "Identification is not supported by this interface."
-msgstr ""
+msgstr "L'identificazione non è supportata da questa interfaccia."
 
 #: netstuff.c:691
 msgid "There are no unassigned interfaces on your system."
-msgstr ""
+msgstr "Non ci sono interfacce non assegnate nel sistema."
 
 #: netstuff.c:732
 #, c-format
 msgid "Do you really want to remove the assigned %s interface?"
-msgstr ""
+msgstr "Vuoi veramente rimuovere l'assegnazione dell'l'interfaccia %s?"
 
 #: netstuff.c:755
 msgid "Select network driver"
-msgstr ""
+msgstr "Scegli un driver di rete"
 
 #: netstuff.c:755
 msgid "Set additional module parameters"
-msgstr ""
+msgstr "Inserisci parametri addizionali per il modulo"
 
 #: netstuff.c:762
 msgid "Loading module..."
-msgstr ""
+msgstr "Caricando il modulo..."
 
 #: netstuff.c:777
 msgid "Unable to load driver module."
-msgstr ""
+msgstr "Impossibile caricare i driver per il modulo."
 
 #: netstuff.c:780
 msgid "Module name cannot be blank."
-msgstr ""
+msgstr "Il nome del modulo non può essere lasciato in bianco."
 
 #: networking.c:110
 msgid "Stopping network..."
-msgstr ""
+msgstr "Arrestando la rete..."
 
 #: networking.c:115
 msgid "Restarting network..."
-msgstr ""
+msgstr "Riavviando la rete..."
 
 #: networking.c:146
 msgid "No GREEN interface assigned."
-msgstr ""
+msgstr "Non è stata assegnata l'interfaccia GREEN."
 
 #: networking.c:152
 msgid "Missing an IP address on GREEN."
-msgstr ""
+msgstr "Indirizzo IP dell'interfaccia GREEN mancante."
 
 #: networking.c:163
 msgid "Error"
-msgstr ""
+msgstr "Errore"
 
 #: networking.c:163
 msgid "Ignore"
-msgstr ""
+msgstr "Ignora"
 
 #: networking.c:164
 msgid "No RED interface assigned."
-msgstr ""
+msgstr "Non è stata assegnata l'interfaccia RED."
 
 #: networking.c:173
 msgid "Missing an IP address on RED."
-msgstr ""
+msgstr "Indirizzo IP dell'interfaccia RED mancante."
 
 #: networking.c:183
 msgid "No ORANGE interface assigned."
-msgstr ""
+msgstr "Non è stata assegnata l'interfaccia ORANGE."
 
 #: networking.c:189
 msgid "Missing an IP address on ORANGE."
-msgstr ""
+msgstr "Indirizzo IP dell'interfaccia ORANGE mancante."
 
 #: networking.c:199
 msgid "No BLUE interface assigned."
-msgstr ""
+msgstr "Non è stata assegnata l'interfaccia BLUE."
 
 #: networking.c:205
 msgid "Missing an IP address on BLUE."
-msgstr ""
+msgstr "Indirizzo IP dell'interfaccia BLUE mancante."
 
 #: networking.c:217
 msgid "Misssing DNS."
-msgstr ""
+msgstr "DNS mancanti."
 
 #: networking.c:224
 msgid "Missing Default Gateway."
-msgstr ""
+msgstr "Manca il Gateway di Default."
 
 #: networking.c:237 networking.c:304
 msgid "Network configuration type"
-msgstr ""
+msgstr "Tipo di configurazione di rete."
 
 #: networking.c:238 networking.c:409
 msgid "Drivers and card assignments"
-msgstr ""
+msgstr "Assegnazione dei driver e delle schede"
 
 #: networking.c:239 networking.c:640
 msgid "Address settings"
-msgstr ""
+msgstr "Impostazioni dell'indirizzo"
 
 #: networking.c:240 networking.c:743
 msgid "DNS and Gateway settings"
-msgstr ""
+msgstr "Impostazioni DNG e Gateway"
 
 #: networking.c:260
 msgid "When configuration is complete, a network restart will be required."
-msgstr ""
+msgstr "Quando la configurazione sarà completata, sarà necessario un riavvio della rete."
 
 #: networking.c:267
 #, c-format
@@ -439,15 +441,15 @@ msgid ""
 "Current config: %s\n"
 "\n"
 "%s"
-msgstr ""
+msgstr "Configurazione corrente: %s\n\n%s"
 
 #: networking.c:268
 msgid "Network configuration menu"
-msgstr ""
+msgstr "Menu di configurazione della rete"
 
 #: networking.c:269 networking.c:520 networking.c:642
 msgid "Done"
-msgstr ""
+msgstr "Fatto"
 
 #: networking.c:300
 #, c-format
@@ -456,7 +458,7 @@ msgid ""
 "list those interfaces which have ethernet attached. If you change this "
 "setting, a network restart will be required, and you will have to "
 "reconfigure the network driver assignments."
-msgstr ""
+msgstr "Scegli la configurazione di rete per l'interfaccia %s. I seguenti tipi di configurazione mostrano le interfacce con collegamento ethernet. Se cambi le impostazioni sarà richiesto un riavvio della rete, e sarà necessario riconfigurare le assegnazioni dei driver di rete."
 
 #: networking.c:307
 #, c-format
@@ -464,35 +466,35 @@ msgid ""
 "Not enough netcards for your choice.\n"
 "\n"
 "Needed: %d - Available: %d\n"
-msgstr ""
+msgstr "Non solo più disponibili schede di rete per la tua scelta.\n\nRichieste: %d - Disponibili: %d\n"
 
 #: networking.c:359
 msgid ""
 "Configure network drivers, and which interface each card is assigned to. The current configuration is as follows:\n"
 "\n"
-msgstr ""
+msgstr "Configura i driver di rete e le assegnazioni delle schede alle interfacce. La configurazione attuale è la seguente:\n\n"
 
 #: networking.c:408
 msgid "Do you wish to change these settings?"
-msgstr ""
+msgstr "Desideri cambiare queste impostazioni?"
 
 #: networking.c:447
 msgid "Restarting non-local network..."
-msgstr ""
+msgstr "Riavviando la rete esterna..."
 
 #: networking.c:464
 msgid ""
 "Please choose the interface you wish to change.\n"
 "\n"
-msgstr ""
+msgstr "Seleziona l'interfaccia che desideri cambiare.\n\n"
 
 #: networking.c:519
 msgid "Assigned Cards"
-msgstr ""
+msgstr "Schede assegnate"
 
 #: networking.c:520
 msgid "Remove"
-msgstr ""
+msgstr "Rimuovi"
 
 #: networking.c:556 networking.c:649
 #, c-format
@@ -501,84 +503,84 @@ msgid ""
 "connection to the %s machine will be broken, and you will have to reconnect "
 "on the new IP. This is a risky operation, and should only be attempted if "
 "you have physical access to the machine, should something go wrong."
-msgstr ""
+msgstr "Se cambi l'indirizzo IP e sei collegato in maniera remota, la connessione alla macchina %s sarà interrotta e sarà necessario riconnettersi usando il nuovo indirizzo. Questa è una operazione rischiosa e dovrebbe essere eseguita solamente se è disponibile un accesso fisico alla macchina, in caso qualcosa vada storto. "
 
 #: networking.c:641
 msgid "Select the interface you wish to reconfigure."
-msgstr ""
+msgstr "Scegli l'interfaccia che vuoi riconfigurare."
 
 #: networking.c:729
 msgid "Default gateway:"
-msgstr ""
+msgstr "Gateway di Default:"
 
 #: networking.c:744
 msgid ""
 "Enter the DNS and gateway information. These settings are used only with "
 "Static IP (and DHCP if DNS set) on the RED interface."
-msgstr ""
+msgstr "Immettere i parametri per il DNS ed il Gateway. Queste impostazioni saranno prese in considerazione solamente con l'opzione \"IP Statico\" (e DHCP se sono stati impostati i DNS) dell'interfaccia RED. "
 
 #: networking.c:773
 msgid "Default gateway"
-msgstr ""
+msgstr "Gateway di Default"
 
 #: networking.c:780
 msgid "Secondary DNS specified without a Primary DNS"
-msgstr ""
+msgstr "E' stato specificato un DNS secondario senza un DNS primario"
 
 #: passwords.c:33
 msgid ""
 "Enter the 'root' user password. Login as this user for commandline access."
-msgstr ""
+msgstr "Immettere la Password per l'utente 'root'. Quando ci si collega da riga di comando, usare questo utente."
 
 #: passwords.c:38 passwords.c:61
 msgid "Setting password"
-msgstr ""
+msgstr "Impostando la Password"
 
 #: passwords.c:38
 msgid "Setting 'root' password...."
-msgstr ""
+msgstr "Impostando la Password per l'utente 'root'..."
 
 #: passwords.c:39
 msgid "Problem setting 'root' password."
-msgstr ""
+msgstr "Problemi durante l'impostazione della Password per l'utente 'root'."
 
 #: passwords.c:53
 #, c-format
 msgid ""
 "Enter %s 'admin' user password. This is the user to use for logging into the"
 " %s web administration pages."
-msgstr ""
+msgstr "Introdurre la Password per l'utente 'admin' di %s. Quando ci si collega all'interfaccia web di %s usare questo utente. "
 
 #: passwords.c:60
 #, c-format
 msgid "Setting %s 'admin' user password..."
-msgstr ""
+msgstr "Impostando la Password dell'utente 'admin' di %s..."
 
 #: passwords.c:62
 #, c-format
 msgid "Problem setting %s 'admin' user password."
-msgstr ""
+msgstr "Si sono verificati problemi durante la configurazione della Password dell'utente 'admin' di %s."
 
 #: passwords.c:76
 msgid "Password:"
-msgstr ""
+msgstr "Password:"
 
 #: passwords.c:77
 msgid "Again:"
-msgstr ""
+msgstr "Nuovamente:"
 
 #: passwords.c:95
 msgid "Password cannot be blank."
-msgstr ""
+msgstr "La Password non può essere vuota."
 
 #: passwords.c:102
 msgid "Passwords do not match."
-msgstr ""
+msgstr "Le password non corrispondono."
 
 #: passwords.c:109
 msgid "Password cannot contain spaces."
-msgstr ""
+msgstr "La Password non può contenere spazi."
 
 #: timezone.c:77
 msgid "Choose the timezone you are in from the list below."
-msgstr ""
+msgstr "Scegli il tuo fuso orario dalla lista sottostante."

diff --git a/src/setup/po/ja_JP.po b/src/setup/po/ja_JP.po
new file mode 100644 (file)
index 0000000..0d2d2b6
--- /dev/null
+++ b/src/setup/po/ja_JP.po
@@ -0,0 +1,584 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR The IPFire Project (www.ipfire.org)
+# This file is distributed under the same license as the PACKAGE package.
+# 
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: IPFire Project\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-08-21 15:12+0000\n"
+"PO-Revision-Date: 2014-08-12 10:08+0000\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: Japanese (Japan) (http://www.transifex.com/projects/p/ipfire/language/ja_JP/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ja_JP\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: dhcp.c:50
+msgid "Start address:"
+msgstr ""
+
+#: dhcp.c:51
+msgid "End address:"
+msgstr ""
+
+#: dhcp.c:52 networking.c:717
+msgid "Primary DNS:"
+msgstr ""
+
+#: dhcp.c:53 networking.c:723
+msgid "Secondary DNS:"
+msgstr ""
+
+#: dhcp.c:54
+msgid "Default lease (mins):"
+msgstr ""
+
+#: dhcp.c:55
+msgid "Max lease (mins):"
+msgstr ""
+
+#: dhcp.c:56
+msgid "Domain name suffix:"
+msgstr ""
+
+#: dhcp.c:86 dhcp.c:93 dhcp.c:101 domainname.c:34 hostname.c:37 keymap.c:70
+#: misc.c:40 misc.c:52 netstuff.c:377 netstuff.c:566 netstuff.c:704
+#: networking.c:134 networking.c:255 networking.c:291 networking.c:346
+#: networking.c:442 networking.c:552 networking.c:603 networking.c:610
+#: networking.c:713 timezone.c:63
+msgid "Unable to open settings file"
+msgstr ""
+
+#: dhcp.c:111
+msgid "DHCP server configuration"
+msgstr ""
+
+#: dhcp.c:116
+msgid "Configure the DHCP server by entering the settings information."
+msgstr ""
+
+#: dhcp.c:125
+msgid "Enabled"
+msgstr ""
+
+#: dhcp.c:142 domainname.c:43 hostname.c:47 keymap.c:86 main.c:99 main.c:172
+#: main.c:174 netstuff.c:157 netstuff.c:733 netstuff.c:756 networking.c:163
+#: networking.c:269 networking.c:305 networking.c:409 networking.c:560
+#: networking.c:642 networking.c:653 networking.c:746 passwords.c:89
+#: timezone.c:78
+msgid "OK"
+msgstr ""
+
+#: dhcp.c:143 domainname.c:43 hostname.c:47 keymap.c:86 netstuff.c:158
+#: netstuff.c:673 netstuff.c:733 netstuff.c:756 networking.c:305
+#: networking.c:410 networking.c:560 networking.c:653 networking.c:746
+#: passwords.c:89 timezone.c:78
+msgid "Cancel"
+msgstr ""
+
+#: dhcp.c:156
+msgid ""
+"The following fields are invalid:\n"
+"\n"
+msgstr ""
+
+#: dhcp.c:159
+msgid "Start address"
+msgstr ""
+
+#: dhcp.c:165
+msgid "End address"
+msgstr ""
+
+#: dhcp.c:173 networking.c:755
+msgid "Primary DNS"
+msgstr ""
+
+#: dhcp.c:182 networking.c:764
+msgid "Secondary DNS"
+msgstr ""
+
+#: dhcp.c:189
+msgid "Default lease time"
+msgstr ""
+
+#: dhcp.c:195
+msgid "Max. lease time"
+msgstr ""
+
+#: domainname.c:42 main.c:70
+msgid "Domain name"
+msgstr ""
+
+#: domainname.c:42
+msgid "Enter Domain name"
+msgstr ""
+
+#: domainname.c:48
+msgid "Domain name cannot be empty."
+msgstr ""
+
+#: domainname.c:50
+msgid "Domain name cannot contain spaces."
+msgstr ""
+
+#: domainname.c:53
+msgid "Domain name may only contain letters, numbers, hyphens and periods."
+msgstr ""
+
+#: hostname.c:46 main.c:69
+msgid "Hostname"
+msgstr ""
+
+#: hostname.c:46
+msgid "Enter the machine's hostname."
+msgstr ""
+
+#: hostname.c:53
+msgid "Hostname cannot be empty."
+msgstr ""
+
+#: hostname.c:55
+msgid "Hostname cannot contain spaces."
+msgstr ""
+
+#: hostname.c:58
+msgid "Hostname may only contain letters, numbers and hyphens."
+msgstr ""
+
+#: keymap.c:84 main.c:67
+msgid "Keyboard mapping"
+msgstr ""
+
+#: keymap.c:85
+msgid "Choose the type of keyboard you are using from the list below."
+msgstr ""
+
+#: main.c:68 timezone.c:77
+msgid "Timezone"
+msgstr ""
+
+#: main.c:71 networking.c:110 networking.c:115 networking.c:447
+msgid "Networking"
+msgstr ""
+
+#: main.c:72 misc.c:147
+msgid "ISDN"
+msgstr ""
+
+#: main.c:73
+msgid "'root' password"
+msgstr ""
+
+#: main.c:74
+msgid "'admin' password"
+msgstr ""
+
+#: main.c:90
+msgid "              <Tab>/<Alt-Tab> between elements   |  <Space> selects"
+msgstr ""
+
+#: main.c:97
+msgid "Section menu"
+msgstr ""
+
+#: main.c:98
+msgid "Select the item you wish to configure."
+msgstr ""
+
+#: main.c:99
+msgid "Quit"
+msgstr ""
+
+#: main.c:172
+msgid "Setup is complete."
+msgstr ""
+
+#: main.c:174 netstuff.c:733 networking.c:560 networking.c:653
+msgid "Warning"
+msgstr ""
+
+#: main.c:175
+msgid ""
+"Initial setup was not entirely complete. You must ensure that Setup is "
+"properly finished by running setup again at the shell."
+msgstr ""
+
+#: misc.c:62
+#, c-format
+msgid "Unable to write %s/main/hostname.conf"
+msgstr ""
+
+#: misc.c:71
+msgid "Unable to open main hosts file."
+msgstr ""
+
+#: misc.c:76
+msgid "Unable to write /etc/hosts."
+msgstr ""
+
+#: misc.c:117
+msgid "Unable to write /etc/hosts.deny."
+msgstr ""
+
+#: misc.c:125
+msgid "Unable to write /etc/hosts.allow."
+msgstr ""
+
+#: misc.c:136
+msgid "Unable to set hostname."
+msgstr ""
+
+#: misc.c:147
+msgid "Scanning and configuring ISDN devices."
+msgstr ""
+
+#: misc.c:148
+msgid "Unable to scan for ISDN devices."
+msgstr ""
+
+#: netstuff.c:86
+#, c-format
+msgid "Interface - %s"
+msgstr ""
+
+#: netstuff.c:91
+#, c-format
+msgid "Enter the IP address information for the %s interface."
+msgstr ""
+
+#: netstuff.c:103
+msgid "Static"
+msgstr ""
+
+#: netstuff.c:104
+msgid "DHCP"
+msgstr ""
+
+#: netstuff.c:105
+msgid "PPP DIALUP (PPPoE, modem, ATM ...)"
+msgstr ""
+
+#: netstuff.c:113
+msgid "DHCP Hostname:"
+msgstr ""
+
+#: netstuff.c:115
+msgid "Force DHCP MTU:"
+msgstr ""
+
+#: netstuff.c:134
+msgid "IP address:"
+msgstr ""
+
+#: netstuff.c:146
+msgid "Network mask:"
+msgstr ""
+
+#: netstuff.c:173 networking.c:749
+msgid "The following fields are invalid:"
+msgstr ""
+
+#: netstuff.c:183
+msgid "IP address"
+msgstr ""
+
+#: netstuff.c:189
+msgid "Network mask"
+msgstr ""
+
+#: netstuff.c:198
+msgid "DHCP hostname"
+msgstr ""
+
+#: netstuff.c:396 netstuff.c:709
+msgid "Unset"
+msgstr ""
+
+#: netstuff.c:669
+#, c-format
+msgid "Please choose a networkcard for the following interface - %s."
+msgstr ""
+
+#: netstuff.c:672
+msgid "Extended Network Menu"
+msgstr ""
+
+#: netstuff.c:673 networking.c:520
+msgid "Select"
+msgstr ""
+
+#: netstuff.c:673
+msgid "Identify"
+msgstr ""
+
+#: netstuff.c:678
+msgid "Device Identification"
+msgstr ""
+
+#: netstuff.c:678
+msgid "The lights on the selected port should flash now for 10 seconds..."
+msgstr ""
+
+#: netstuff.c:679
+msgid "Identification is not supported by this interface."
+msgstr ""
+
+#: netstuff.c:691
+msgid "There are no unassigned interfaces on your system."
+msgstr ""
+
+#: netstuff.c:732
+#, c-format
+msgid "Do you really want to remove the assigned %s interface?"
+msgstr ""
+
+#: netstuff.c:755
+msgid "Select network driver"
+msgstr ""
+
+#: netstuff.c:755
+msgid "Set additional module parameters"
+msgstr ""
+
+#: netstuff.c:762
+msgid "Loading module..."
+msgstr ""
+
+#: netstuff.c:777
+msgid "Unable to load driver module."
+msgstr ""
+
+#: netstuff.c:780
+msgid "Module name cannot be blank."
+msgstr ""
+
+#: networking.c:110
+msgid "Stopping network..."
+msgstr ""
+
+#: networking.c:115
+msgid "Restarting network..."
+msgstr ""
+
+#: networking.c:146
+msgid "No GREEN interface assigned."
+msgstr ""
+
+#: networking.c:152
+msgid "Missing an IP address on GREEN."
+msgstr ""
+
+#: networking.c:163
+msgid "Error"
+msgstr ""
+
+#: networking.c:163
+msgid "Ignore"
+msgstr ""
+
+#: networking.c:164
+msgid "No RED interface assigned."
+msgstr ""
+
+#: networking.c:173
+msgid "Missing an IP address on RED."
+msgstr ""
+
+#: networking.c:183
+msgid "No ORANGE interface assigned."
+msgstr ""
+
+#: networking.c:189
+msgid "Missing an IP address on ORANGE."
+msgstr ""
+
+#: networking.c:199
+msgid "No BLUE interface assigned."
+msgstr ""
+
+#: networking.c:205
+msgid "Missing an IP address on BLUE."
+msgstr ""
+
+#: networking.c:217
+msgid "Misssing DNS."
+msgstr ""
+
+#: networking.c:224
+msgid "Missing Default Gateway."
+msgstr ""
+
+#: networking.c:237 networking.c:304
+msgid "Network configuration type"
+msgstr ""
+
+#: networking.c:238 networking.c:409
+msgid "Drivers and card assignments"
+msgstr ""
+
+#: networking.c:239 networking.c:640
+msgid "Address settings"
+msgstr ""
+
+#: networking.c:240 networking.c:743
+msgid "DNS and Gateway settings"
+msgstr ""
+
+#: networking.c:260
+msgid "When configuration is complete, a network restart will be required."
+msgstr ""
+
+#: networking.c:267
+#, c-format
+msgid ""
+"Current config: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: networking.c:268
+msgid "Network configuration menu"
+msgstr ""
+
+#: networking.c:269 networking.c:520 networking.c:642
+msgid "Done"
+msgstr ""
+
+#: networking.c:300
+#, c-format
+msgid ""
+"Select the network configuration for %s. The following configuration types "
+"list those interfaces which have ethernet attached. If you change this "
+"setting, a network restart will be required, and you will have to "
+"reconfigure the network driver assignments."
+msgstr ""
+
+#: networking.c:307
+#, c-format
+msgid ""
+"Not enough netcards for your choice.\n"
+"\n"
+"Needed: %d - Available: %d\n"
+msgstr ""
+
+#: networking.c:359
+msgid ""
+"Configure network drivers, and which interface each card is assigned to. The current configuration is as follows:\n"
+"\n"
+msgstr ""
+
+#: networking.c:408
+msgid "Do you wish to change these settings?"
+msgstr ""
+
+#: networking.c:447
+msgid "Restarting non-local network..."
+msgstr ""
+
+#: networking.c:464
+msgid ""
+"Please choose the interface you wish to change.\n"
+"\n"
+msgstr ""
+
+#: networking.c:519
+msgid "Assigned Cards"
+msgstr ""
+
+#: networking.c:520
+msgid "Remove"
+msgstr ""
+
+#: networking.c:556 networking.c:649
+#, c-format
+msgid ""
+"If you change this IP address, and you are logged in remotely, your "
+"connection to the %s machine will be broken, and you will have to reconnect "
+"on the new IP. This is a risky operation, and should only be attempted if "
+"you have physical access to the machine, should something go wrong."
+msgstr ""
+
+#: networking.c:641
+msgid "Select the interface you wish to reconfigure."
+msgstr ""
+
+#: networking.c:729
+msgid "Default gateway:"
+msgstr ""
+
+#: networking.c:744
+msgid ""
+"Enter the DNS and gateway information. These settings are used only with "
+"Static IP (and DHCP if DNS set) on the RED interface."
+msgstr ""
+
+#: networking.c:773
+msgid "Default gateway"
+msgstr ""
+
+#: networking.c:780
+msgid "Secondary DNS specified without a Primary DNS"
+msgstr ""
+
+#: passwords.c:33
+msgid ""
+"Enter the 'root' user password. Login as this user for commandline access."
+msgstr ""
+
+#: passwords.c:38 passwords.c:61
+msgid "Setting password"
+msgstr ""
+
+#: passwords.c:38
+msgid "Setting 'root' password...."
+msgstr ""
+
+#: passwords.c:39
+msgid "Problem setting 'root' password."
+msgstr ""
+
+#: passwords.c:53
+#, c-format
+msgid ""
+"Enter %s 'admin' user password. This is the user to use for logging into the"
+" %s web administration pages."
+msgstr ""
+
+#: passwords.c:60
+#, c-format
+msgid "Setting %s 'admin' user password..."
+msgstr ""
+
+#: passwords.c:62
+#, c-format
+msgid "Problem setting %s 'admin' user password."
+msgstr ""
+
+#: passwords.c:76
+msgid "Password:"
+msgstr ""
+
+#: passwords.c:77
+msgid "Again:"
+msgstr ""
+
+#: passwords.c:95
+msgid "Password cannot be blank."
+msgstr ""
+
+#: passwords.c:102
+msgid "Passwords do not match."
+msgstr ""
+
+#: passwords.c:109
+msgid "Password cannot contain spaces."
+msgstr ""
+
+#: timezone.c:77
+msgid "Choose the timezone you are in from the list below."
+msgstr ""

diff --git a/src/setup/po/jv.po b/src/setup/po/jv.po
new file mode 100644 (file)
index 0000000..e8a7e89
--- /dev/null
+++ b/src/setup/po/jv.po
@@ -0,0 +1,584 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR The IPFire Project (www.ipfire.org)
+# This file is distributed under the same license as the PACKAGE package.
+# 
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: IPFire Project\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-08-21 15:12+0000\n"
+"PO-Revision-Date: 2014-08-12 10:08+0000\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: Javanese (http://www.transifex.com/projects/p/ipfire/language/jv/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: jv\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: dhcp.c:50
+msgid "Start address:"
+msgstr ""
+
+#: dhcp.c:51
+msgid "End address:"
+msgstr ""
+
+#: dhcp.c:52 networking.c:717
+msgid "Primary DNS:"
+msgstr ""
+
+#: dhcp.c:53 networking.c:723
+msgid "Secondary DNS:"
+msgstr ""
+
+#: dhcp.c:54
+msgid "Default lease (mins):"
+msgstr ""
+
+#: dhcp.c:55
+msgid "Max lease (mins):"
+msgstr ""
+
+#: dhcp.c:56
+msgid "Domain name suffix:"
+msgstr ""
+
+#: dhcp.c:86 dhcp.c:93 dhcp.c:101 domainname.c:34 hostname.c:37 keymap.c:70
+#: misc.c:40 misc.c:52 netstuff.c:377 netstuff.c:566 netstuff.c:704
+#: networking.c:134 networking.c:255 networking.c:291 networking.c:346
+#: networking.c:442 networking.c:552 networking.c:603 networking.c:610
+#: networking.c:713 timezone.c:63
+msgid "Unable to open settings file"
+msgstr ""
+
+#: dhcp.c:111
+msgid "DHCP server configuration"
+msgstr ""
+
+#: dhcp.c:116
+msgid "Configure the DHCP server by entering the settings information."
+msgstr ""
+
+#: dhcp.c:125
+msgid "Enabled"
+msgstr ""
+
+#: dhcp.c:142 domainname.c:43 hostname.c:47 keymap.c:86 main.c:99 main.c:172
+#: main.c:174 netstuff.c:157 netstuff.c:733 netstuff.c:756 networking.c:163
+#: networking.c:269 networking.c:305 networking.c:409 networking.c:560
+#: networking.c:642 networking.c:653 networking.c:746 passwords.c:89
+#: timezone.c:78
+msgid "OK"
+msgstr ""
+
+#: dhcp.c:143 domainname.c:43 hostname.c:47 keymap.c:86 netstuff.c:158
+#: netstuff.c:673 netstuff.c:733 netstuff.c:756 networking.c:305
+#: networking.c:410 networking.c:560 networking.c:653 networking.c:746
+#: passwords.c:89 timezone.c:78
+msgid "Cancel"
+msgstr ""
+
+#: dhcp.c:156
+msgid ""
+"The following fields are invalid:\n"
+"\n"
+msgstr ""
+
+#: dhcp.c:159
+msgid "Start address"
+msgstr ""
+
+#: dhcp.c:165
+msgid "End address"
+msgstr ""
+
+#: dhcp.c:173 networking.c:755
+msgid "Primary DNS"
+msgstr ""
+
+#: dhcp.c:182 networking.c:764
+msgid "Secondary DNS"
+msgstr ""
+
+#: dhcp.c:189
+msgid "Default lease time"
+msgstr ""
+
+#: dhcp.c:195
+msgid "Max. lease time"
+msgstr ""
+
+#: domainname.c:42 main.c:70
+msgid "Domain name"
+msgstr ""
+
+#: domainname.c:42
+msgid "Enter Domain name"
+msgstr ""
+
+#: domainname.c:48
+msgid "Domain name cannot be empty."
+msgstr ""
+
+#: domainname.c:50
+msgid "Domain name cannot contain spaces."
+msgstr ""
+
+#: domainname.c:53
+msgid "Domain name may only contain letters, numbers, hyphens and periods."
+msgstr ""
+
+#: hostname.c:46 main.c:69
+msgid "Hostname"
+msgstr ""
+
+#: hostname.c:46
+msgid "Enter the machine's hostname."
+msgstr ""
+
+#: hostname.c:53
+msgid "Hostname cannot be empty."
+msgstr ""
+
+#: hostname.c:55
+msgid "Hostname cannot contain spaces."
+msgstr ""
+
+#: hostname.c:58
+msgid "Hostname may only contain letters, numbers and hyphens."
+msgstr ""
+
+#: keymap.c:84 main.c:67
+msgid "Keyboard mapping"
+msgstr ""
+
+#: keymap.c:85
+msgid "Choose the type of keyboard you are using from the list below."
+msgstr ""
+
+#: main.c:68 timezone.c:77
+msgid "Timezone"
+msgstr ""
+
+#: main.c:71 networking.c:110 networking.c:115 networking.c:447
+msgid "Networking"
+msgstr ""
+
+#: main.c:72 misc.c:147
+msgid "ISDN"
+msgstr ""
+
+#: main.c:73
+msgid "'root' password"
+msgstr ""
+
+#: main.c:74
+msgid "'admin' password"
+msgstr ""
+
+#: main.c:90
+msgid "              <Tab>/<Alt-Tab> between elements   |  <Space> selects"
+msgstr ""
+
+#: main.c:97
+msgid "Section menu"
+msgstr ""
+
+#: main.c:98
+msgid "Select the item you wish to configure."
+msgstr ""
+
+#: main.c:99
+msgid "Quit"
+msgstr ""
+
+#: main.c:172
+msgid "Setup is complete."
+msgstr ""
+
+#: main.c:174 netstuff.c:733 networking.c:560 networking.c:653
+msgid "Warning"
+msgstr ""
+
+#: main.c:175
+msgid ""
+"Initial setup was not entirely complete. You must ensure that Setup is "
+"properly finished by running setup again at the shell."
+msgstr ""
+
+#: misc.c:62
+#, c-format
+msgid "Unable to write %s/main/hostname.conf"
+msgstr ""
+
+#: misc.c:71
+msgid "Unable to open main hosts file."
+msgstr ""
+
+#: misc.c:76
+msgid "Unable to write /etc/hosts."
+msgstr ""
+
+#: misc.c:117
+msgid "Unable to write /etc/hosts.deny."
+msgstr ""
+
+#: misc.c:125
+msgid "Unable to write /etc/hosts.allow."
+msgstr ""
+
+#: misc.c:136
+msgid "Unable to set hostname."
+msgstr ""
+
+#: misc.c:147
+msgid "Scanning and configuring ISDN devices."
+msgstr ""
+
+#: misc.c:148
+msgid "Unable to scan for ISDN devices."
+msgstr ""
+
+#: netstuff.c:86
+#, c-format
+msgid "Interface - %s"
+msgstr ""
+
+#: netstuff.c:91
+#, c-format
+msgid "Enter the IP address information for the %s interface."
+msgstr ""
+
+#: netstuff.c:103
+msgid "Static"
+msgstr ""
+
+#: netstuff.c:104
+msgid "DHCP"
+msgstr ""
+
+#: netstuff.c:105
+msgid "PPP DIALUP (PPPoE, modem, ATM ...)"
+msgstr ""
+
+#: netstuff.c:113
+msgid "DHCP Hostname:"
+msgstr ""
+
+#: netstuff.c:115
+msgid "Force DHCP MTU:"
+msgstr ""
+
+#: netstuff.c:134
+msgid "IP address:"
+msgstr ""
+
+#: netstuff.c:146
+msgid "Network mask:"
+msgstr ""
+
+#: netstuff.c:173 networking.c:749
+msgid "The following fields are invalid:"
+msgstr ""
+
+#: netstuff.c:183
+msgid "IP address"
+msgstr ""
+
+#: netstuff.c:189
+msgid "Network mask"
+msgstr ""
+
+#: netstuff.c:198
+msgid "DHCP hostname"
+msgstr ""
+
+#: netstuff.c:396 netstuff.c:709
+msgid "Unset"
+msgstr ""
+
+#: netstuff.c:669
+#, c-format
+msgid "Please choose a networkcard for the following interface - %s."
+msgstr ""
+
+#: netstuff.c:672
+msgid "Extended Network Menu"
+msgstr ""
+
+#: netstuff.c:673 networking.c:520
+msgid "Select"
+msgstr ""
+
+#: netstuff.c:673
+msgid "Identify"
+msgstr ""
+
+#: netstuff.c:678
+msgid "Device Identification"
+msgstr ""
+
+#: netstuff.c:678
+msgid "The lights on the selected port should flash now for 10 seconds..."
+msgstr ""
+
+#: netstuff.c:679
+msgid "Identification is not supported by this interface."
+msgstr ""
+
+#: netstuff.c:691
+msgid "There are no unassigned interfaces on your system."
+msgstr ""
+
+#: netstuff.c:732
+#, c-format
+msgid "Do you really want to remove the assigned %s interface?"
+msgstr ""
+
+#: netstuff.c:755
+msgid "Select network driver"
+msgstr ""
+
+#: netstuff.c:755
+msgid "Set additional module parameters"
+msgstr ""
+
+#: netstuff.c:762
+msgid "Loading module..."
+msgstr ""
+
+#: netstuff.c:777
+msgid "Unable to load driver module."
+msgstr ""
+
+#: netstuff.c:780
+msgid "Module name cannot be blank."
+msgstr ""
+
+#: networking.c:110
+msgid "Stopping network..."
+msgstr ""
+
+#: networking.c:115
+msgid "Restarting network..."
+msgstr ""
+
+#: networking.c:146
+msgid "No GREEN interface assigned."
+msgstr ""
+
+#: networking.c:152
+msgid "Missing an IP address on GREEN."
+msgstr ""
+
+#: networking.c:163
+msgid "Error"
+msgstr ""
+
+#: networking.c:163
+msgid "Ignore"
+msgstr ""
+
+#: networking.c:164
+msgid "No RED interface assigned."
+msgstr ""
+
+#: networking.c:173
+msgid "Missing an IP address on RED."
+msgstr ""
+
+#: networking.c:183
+msgid "No ORANGE interface assigned."
+msgstr ""
+
+#: networking.c:189
+msgid "Missing an IP address on ORANGE."
+msgstr ""
+
+#: networking.c:199
+msgid "No BLUE interface assigned."
+msgstr ""
+
+#: networking.c:205
+msgid "Missing an IP address on BLUE."
+msgstr ""
+
+#: networking.c:217
+msgid "Misssing DNS."
+msgstr ""
+
+#: networking.c:224
+msgid "Missing Default Gateway."
+msgstr ""
+
+#: networking.c:237 networking.c:304
+msgid "Network configuration type"
+msgstr ""
+
+#: networking.c:238 networking.c:409
+msgid "Drivers and card assignments"
+msgstr ""
+
+#: networking.c:239 networking.c:640
+msgid "Address settings"
+msgstr ""
+
+#: networking.c:240 networking.c:743
+msgid "DNS and Gateway settings"
+msgstr ""
+
+#: networking.c:260
+msgid "When configuration is complete, a network restart will be required."
+msgstr ""
+
+#: networking.c:267
+#, c-format
+msgid ""
+"Current config: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: networking.c:268
+msgid "Network configuration menu"
+msgstr ""
+
+#: networking.c:269 networking.c:520 networking.c:642
+msgid "Done"
+msgstr ""
+
+#: networking.c:300
+#, c-format
+msgid ""
+"Select the network configuration for %s. The following configuration types "
+"list those interfaces which have ethernet attached. If you change this "
+"setting, a network restart will be required, and you will have to "
+"reconfigure the network driver assignments."
+msgstr ""
+
+#: networking.c:307
+#, c-format
+msgid ""
+"Not enough netcards for your choice.\n"
+"\n"
+"Needed: %d - Available: %d\n"
+msgstr ""
+
+#: networking.c:359
+msgid ""
+"Configure network drivers, and which interface each card is assigned to. The current configuration is as follows:\n"
+"\n"
+msgstr ""
+
+#: networking.c:408
+msgid "Do you wish to change these settings?"
+msgstr ""
+
+#: networking.c:447
+msgid "Restarting non-local network..."
+msgstr ""
+
+#: networking.c:464
+msgid ""
+"Please choose the interface you wish to change.\n"
+"\n"
+msgstr ""
+
+#: networking.c:519
+msgid "Assigned Cards"
+msgstr ""
+
+#: networking.c:520
+msgid "Remove"
+msgstr ""
+
+#: networking.c:556 networking.c:649
+#, c-format
+msgid ""
+"If you change this IP address, and you are logged in remotely, your "
+"connection to the %s machine will be broken, and you will have to reconnect "
+"on the new IP. This is a risky operation, and should only be attempted if "
+"you have physical access to the machine, should something go wrong."
+msgstr ""
+
+#: networking.c:641
+msgid "Select the interface you wish to reconfigure."
+msgstr ""
+
+#: networking.c:729
+msgid "Default gateway:"
+msgstr ""
+
+#: networking.c:744
+msgid ""
+"Enter the DNS and gateway information. These settings are used only with "
+"Static IP (and DHCP if DNS set) on the RED interface."
+msgstr ""
+
+#: networking.c:773
+msgid "Default gateway"
+msgstr ""
+
+#: networking.c:780
+msgid "Secondary DNS specified without a Primary DNS"
+msgstr ""
+
+#: passwords.c:33
+msgid ""
+"Enter the 'root' user password. Login as this user for commandline access."
+msgstr ""
+
+#: passwords.c:38 passwords.c:61
+msgid "Setting password"
+msgstr ""
+
+#: passwords.c:38
+msgid "Setting 'root' password...."
+msgstr ""
+
+#: passwords.c:39
+msgid "Problem setting 'root' password."
+msgstr ""
+
+#: passwords.c:53
+#, c-format
+msgid ""
+"Enter %s 'admin' user password. This is the user to use for logging into the"
+" %s web administration pages."
+msgstr ""
+
+#: passwords.c:60
+#, c-format
+msgid "Setting %s 'admin' user password..."
+msgstr ""
+
+#: passwords.c:62
+#, c-format
+msgid "Problem setting %s 'admin' user password."
+msgstr ""
+
+#: passwords.c:76
+msgid "Password:"
+msgstr ""
+
+#: passwords.c:77
+msgid "Again:"
+msgstr ""
+
+#: passwords.c:95
+msgid "Password cannot be blank."
+msgstr ""
+
+#: passwords.c:102
+msgid "Passwords do not match."
+msgstr ""
+
+#: passwords.c:109
+msgid "Password cannot contain spaces."
+msgstr ""
+
+#: timezone.c:77
+msgid "Choose the timezone you are in from the list below."
+msgstr ""

diff --git a/src/setup/po/nl.po b/src/setup/po/nl.po
index 18d951287f9a88e8af640e977d4fcee2778b3846..1ee909386590f8ca691a059af8777f3ebb7a0f1e 100644 (file)
--- a/src/setup/po/nl.po
+++ b/src/setup/po/nl.po
@@ -3,13 +3,14 @@
 # This file is distributed under the same license as the PACKAGE package.
 # 
 # Translators:
+# Jacques Hylkema <j.hylkema@intronics.nl>, 2015
 msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2014-08-21 15:12+0000\n"
-"PO-Revision-Date: 2014-08-21 15:13+0000\n"
-"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"PO-Revision-Date: 2015-01-26 08:29+0000\n"
+"Last-Translator: Jacques Hylkema <j.hylkema@intronics.nl>\n"
 "Language-Team: Dutch (http://www.transifex.com/projects/p/ipfire/language/nl/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -19,31 +20,31 @@ msgstr ""
 
 #: dhcp.c:50
 msgid "Start address:"
-msgstr ""
+msgstr "Start adres:"
 
 #: dhcp.c:51
 msgid "End address:"
-msgstr ""
+msgstr "Eind adres:"
 
 #: dhcp.c:52 networking.c:717
 msgid "Primary DNS:"
-msgstr ""
+msgstr "Primaire DNS:"
 
 #: dhcp.c:53 networking.c:723
 msgid "Secondary DNS:"
-msgstr ""
+msgstr "Secundaire DNS:"
 
 #: dhcp.c:54
 msgid "Default lease (mins):"
-msgstr ""
+msgstr "Standaard lease (minuten):"
 
 #: dhcp.c:55
 msgid "Max lease (mins):"
-msgstr ""
+msgstr "Maximum lease (minuten):"
 
 #: dhcp.c:56
 msgid "Domain name suffix:"
-msgstr ""
+msgstr "Domein naam achtervoegsel:"
 
 #: dhcp.c:86 dhcp.c:93 dhcp.c:101 domainname.c:34 hostname.c:37 keymap.c:70
 #: misc.c:40 misc.c:52 netstuff.c:377 netstuff.c:566 netstuff.c:704
@@ -51,19 +52,19 @@ msgstr ""
 #: networking.c:442 networking.c:552 networking.c:603 networking.c:610
 #: networking.c:713 timezone.c:63
 msgid "Unable to open settings file"
-msgstr ""
+msgstr "Kon instellingen bestand niet openen"
 
 #: dhcp.c:111
 msgid "DHCP server configuration"
-msgstr ""
+msgstr "DHCP server configuratie"
 
 #: dhcp.c:116
 msgid "Configure the DHCP server by entering the settings information."
-msgstr ""
+msgstr "Configureer de DHCP server door de instellingen in te voeren."
 
 #: dhcp.c:125
 msgid "Enabled"
-msgstr ""
+msgstr "Ingeschakeld"
 
 #: dhcp.c:142 domainname.c:43 hostname.c:47 keymap.c:86 main.c:99 main.c:172
 #: main.c:174 netstuff.c:157 netstuff.c:733 netstuff.c:756 networking.c:163
@@ -71,229 +72,229 @@ msgstr ""
 #: networking.c:642 networking.c:653 networking.c:746 passwords.c:89
 #: timezone.c:78
 msgid "OK"
-msgstr ""
+msgstr "Oke"
 
 #: dhcp.c:143 domainname.c:43 hostname.c:47 keymap.c:86 netstuff.c:158
 #: netstuff.c:673 netstuff.c:733 netstuff.c:756 networking.c:305
 #: networking.c:410 networking.c:560 networking.c:653 networking.c:746
 #: passwords.c:89 timezone.c:78
 msgid "Cancel"
-msgstr ""
+msgstr "Annuleren"
 
 #: dhcp.c:156
 msgid ""
 "The following fields are invalid:\n"
 "\n"
-msgstr ""
+msgstr "De volgende velden zijn ongeldig:\n\n"
 
 #: dhcp.c:159
 msgid "Start address"
-msgstr ""
+msgstr "Start adres"
 
 #: dhcp.c:165
 msgid "End address"
-msgstr ""
+msgstr "Eind adres"
 
 #: dhcp.c:173 networking.c:755
 msgid "Primary DNS"
-msgstr ""
+msgstr "Primaire DNS"
 
 #: dhcp.c:182 networking.c:764
 msgid "Secondary DNS"
-msgstr ""
+msgstr "Secundaire DNS"
 
 #: dhcp.c:189
 msgid "Default lease time"
-msgstr ""
+msgstr "Standaard lease tijd"
 
 #: dhcp.c:195
 msgid "Max. lease time"
-msgstr ""
+msgstr "Maximum lease tijd"
 
 #: domainname.c:42 main.c:70
 msgid "Domain name"
-msgstr ""
+msgstr "Domein naam"
 
 #: domainname.c:42
 msgid "Enter Domain name"
-msgstr ""
+msgstr "Voer domein naam in"
 
 #: domainname.c:48
 msgid "Domain name cannot be empty."
-msgstr ""
+msgstr "Domein naam kan niet leeg zijn."
 
 #: domainname.c:50
 msgid "Domain name cannot contain spaces."
-msgstr ""
+msgstr "Domein naam kan geen spaties bevatten."
 
 #: domainname.c:53
 msgid "Domain name may only contain letters, numbers, hyphens and periods."
-msgstr ""
+msgstr "Domein naam mag uitsluitend letters, nummers, koppeltekens en punten bevatten."
 
 #: hostname.c:46 main.c:69
 msgid "Hostname"
-msgstr ""
+msgstr "hostnaam"
 
 #: hostname.c:46
 msgid "Enter the machine's hostname."
-msgstr ""
+msgstr "Voer de hostnaam voor deze machine in."
 
 #: hostname.c:53
 msgid "Hostname cannot be empty."
-msgstr ""
+msgstr "Hostnaam kan niet leeg zijn."
 
 #: hostname.c:55
 msgid "Hostname cannot contain spaces."
-msgstr ""
+msgstr "Hostnaam kan geen spaties bevatten."
 
 #: hostname.c:58
 msgid "Hostname may only contain letters, numbers and hyphens."
-msgstr ""
+msgstr " Hostnaam mag uitsluitend letters, nummers en koppeltekens bevatten."
 
 #: keymap.c:84 main.c:67
 msgid "Keyboard mapping"
-msgstr ""
+msgstr "Toetsenbord indeling"
 
 #: keymap.c:85
 msgid "Choose the type of keyboard you are using from the list below."
-msgstr ""
+msgstr "Kies het toetsenbord type dat je gebruikt uit onderstaande lijst."
 
 #: main.c:68 timezone.c:77
 msgid "Timezone"
-msgstr ""
+msgstr "Tijdzone"
 
 #: main.c:71 networking.c:110 networking.c:115 networking.c:447
 msgid "Networking"
-msgstr ""
+msgstr "Netwerken"
 
 #: main.c:72 misc.c:147
 msgid "ISDN"
-msgstr ""
+msgstr "ISDN"
 
 #: main.c:73
 msgid "'root' password"
-msgstr ""
+msgstr "'root' wachtwoord"
 
 #: main.c:74
 msgid "'admin' password"
-msgstr ""
+msgstr "'admin' wachtwoord"
 
 #: main.c:90
 msgid "              <Tab>/<Alt-Tab> between elements   |  <Space> selects"
-msgstr ""
+msgstr "<Tab>/<Alt-Tab> tussen onderdelen | <Space> selecteer"
 
 #: main.c:97
 msgid "Section menu"
-msgstr ""
+msgstr "Sectie menu"
 
 #: main.c:98
 msgid "Select the item you wish to configure."
-msgstr ""
+msgstr "Selecteer het onderdeel dat je wil configureren."
 
 #: main.c:99
 msgid "Quit"
-msgstr ""
+msgstr "Stoppen"
 
 #: main.c:172
 msgid "Setup is complete."
-msgstr ""
+msgstr "Installatie is gereed."
 
 #: main.c:174 netstuff.c:733 networking.c:560 networking.c:653
 msgid "Warning"
-msgstr ""
+msgstr "Waarschuwing"
 
 #: main.c:175
 msgid ""
 "Initial setup was not entirely complete. You must ensure that Setup is "
 "properly finished by running setup again at the shell."
-msgstr ""
+msgstr "Initiële configuratie was niet voltooid. Je moet ervoor zorgen dat de installatie wordt voltooid door 'setup' opnieuw uit te voeren vanaf de shell."
 
 #: misc.c:62
 #, c-format
 msgid "Unable to write %s/main/hostname.conf"
-msgstr ""
+msgstr "Kon %s/main/hostname.conf niet wegschrijven"
 
 #: misc.c:71
 msgid "Unable to open main hosts file."
-msgstr ""
+msgstr "Kon het hosts bestand niet openen."
 
 #: misc.c:76
 msgid "Unable to write /etc/hosts."
-msgstr ""
+msgstr "Kon /etc/hosts niet wegschrijven."
 
 #: misc.c:117
 msgid "Unable to write /etc/hosts.deny."
-msgstr ""
+msgstr "Kon /etc/hosts.deny niet wegschrijven."
 
 #: misc.c:125
 msgid "Unable to write /etc/hosts.allow."
-msgstr ""
+msgstr "Kon /etc/hosts.allow niet wegschrijven."
 
 #: misc.c:136
 msgid "Unable to set hostname."
-msgstr ""
+msgstr "Kon de hostnaam niet instellen."
 
 #: misc.c:147
 msgid "Scanning and configuring ISDN devices."
-msgstr ""
+msgstr "Scannen en configureren van ISDN apparaten."
 
 #: misc.c:148
 msgid "Unable to scan for ISDN devices."
-msgstr ""
+msgstr "Kon ISDN apparaten niet scannen."
 
 #: netstuff.c:86
 #, c-format
 msgid "Interface - %s"
-msgstr ""
+msgstr "Interface - %s"
 
 #: netstuff.c:91
 #, c-format
 msgid "Enter the IP address information for the %s interface."
-msgstr ""
+msgstr "Voer de IP adres gegevens in voor de %s interface."
 
 #: netstuff.c:103
 msgid "Static"
-msgstr ""
+msgstr "Statisch"
 
 #: netstuff.c:104
 msgid "DHCP"
-msgstr ""
+msgstr "DHCP"
 
 #: netstuff.c:105
 msgid "PPP DIALUP (PPPoE, modem, ATM ...)"
-msgstr ""
+msgstr "PPP DIALUP (PPPoE, modem, ATM ...)"
 
 #: netstuff.c:113
 msgid "DHCP Hostname:"
-msgstr ""
+msgstr "DHCP Hostnaam:"
 
 #: netstuff.c:115
 msgid "Force DHCP MTU:"
-msgstr ""
+msgstr "Forceer DHCP MTU:"
 
 #: netstuff.c:134
 msgid "IP address:"
-msgstr ""
+msgstr "IP adres:"
 
 #: netstuff.c:146
 msgid "Network mask:"
-msgstr ""
+msgstr "Netwerk masker:"
 
 #: netstuff.c:173 networking.c:749
 msgid "The following fields are invalid:"
-msgstr ""
+msgstr "De volgende velden zijn ongeldig:"
 
 #: netstuff.c:183
 msgid "IP address"
-msgstr ""
+msgstr "IP adres"
 
 #: netstuff.c:189
 msgid "Network mask"
-msgstr ""
+msgstr "Netwerk masker"
 
 #: netstuff.c:198
 msgid "DHCP hostname"
-msgstr ""
+msgstr "DHCP hostnaam"
 
 #: netstuff.c:396 netstuff.c:709
 msgid "Unset"
@@ -302,52 +303,52 @@ msgstr ""
 #: netstuff.c:669
 #, c-format
 msgid "Please choose a networkcard for the following interface - %s."
-msgstr ""
+msgstr "Kies een netwerkkaart voor de volgende interface - %s."
 
 #: netstuff.c:672
 msgid "Extended Network Menu"
-msgstr ""
+msgstr "Uitgebreid Netwerk Menu"
 
 #: netstuff.c:673 networking.c:520
 msgid "Select"
-msgstr ""
+msgstr "Selecteer"
 
 #: netstuff.c:673
 msgid "Identify"
-msgstr ""
+msgstr "Identificeer"
 
 #: netstuff.c:678
 msgid "Device Identification"
-msgstr ""
+msgstr "Apparaat identificatie"
 
 #: netstuff.c:678
 msgid "The lights on the selected port should flash now for 10 seconds..."
-msgstr ""
+msgstr "De lampjes op de geselecteerde netwerkkaart zouden nu 10 seconden moeten flikkeren..."
 
 #: netstuff.c:679
 msgid "Identification is not supported by this interface."
-msgstr ""
+msgstr "Identificatie wordt niet ondersteund door deze netwerkkaart."
 
 #: netstuff.c:691
 msgid "There are no unassigned interfaces on your system."
-msgstr ""
+msgstr "Er zijn geen niet-toegewezen netwerkkaarten in je systeem"
 
 #: netstuff.c:732
 #, c-format
 msgid "Do you really want to remove the assigned %s interface?"
-msgstr ""
+msgstr "Wil je de toegewezen %s interface echt verwijderen?"
 
 #: netstuff.c:755
 msgid "Select network driver"
-msgstr ""
+msgstr "Selecteer netwerk stuurprogramma"
 
 #: netstuff.c:755
 msgid "Set additional module parameters"
-msgstr ""
+msgstr "Stel additionele module parameters in"
 
 #: netstuff.c:762
 msgid "Loading module..."
-msgstr ""
+msgstr "Bezig met laden van module..."
 
 #: netstuff.c:777
 msgid "Unable to load driver module."

diff --git a/src/setup/po/pl.po b/src/setup/po/pl.po
index 607394ac392015bd0512ded277d897d922bdd5a4..ee6183fbcf96e4b36386f260ffd7185fa120026d 100644 (file)
--- a/src/setup/po/pl.po
+++ b/src/setup/po/pl.po
@@ -3,13 +3,15 @@
 # This file is distributed under the same license as the PACKAGE package.
 # 
 # Translators:
+# btelega <btelega@gmail.com>, 2014
+# Przemysław Karpeta <przemyslaw.karpeta@gmail.com>, 2014
 msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2014-08-21 15:12+0000\n"
-"PO-Revision-Date: 2014-08-21 15:13+0000\n"
-"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"PO-Revision-Date: 2014-11-03 15:36+0000\n"
+"Last-Translator: Przemysław Karpeta <przemyslaw.karpeta@gmail.com>\n"
 "Language-Team: Polish (http://www.transifex.com/projects/p/ipfire/language/pl/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -19,31 +21,31 @@ msgstr ""
 
 #: dhcp.c:50
 msgid "Start address:"
-msgstr ""
+msgstr "Adres początkowy:"
 
 #: dhcp.c:51
 msgid "End address:"
-msgstr ""
+msgstr "Adres końcowy:"
 
 #: dhcp.c:52 networking.c:717
 msgid "Primary DNS:"
-msgstr ""
+msgstr "Główny DNS:"
 
 #: dhcp.c:53 networking.c:723
 msgid "Secondary DNS:"
-msgstr ""
+msgstr "Pomocniczy DNS:"
 
 #: dhcp.c:54
 msgid "Default lease (mins):"
-msgstr ""
+msgstr "Domyślna dzierżawa (min.):"
 
 #: dhcp.c:55
 msgid "Max lease (mins):"
-msgstr ""
+msgstr "Maksymalna dzierżawa (min.):"
 
 #: dhcp.c:56
 msgid "Domain name suffix:"
-msgstr ""
+msgstr "Przyrostek domeny: "
 
 #: dhcp.c:86 dhcp.c:93 dhcp.c:101 domainname.c:34 hostname.c:37 keymap.c:70
 #: misc.c:40 misc.c:52 netstuff.c:377 netstuff.c:566 netstuff.c:704
@@ -51,19 +53,19 @@ msgstr ""
 #: networking.c:442 networking.c:552 networking.c:603 networking.c:610
 #: networking.c:713 timezone.c:63
 msgid "Unable to open settings file"
-msgstr ""
+msgstr "Nie można otworzyć pliku ustawień"
 
 #: dhcp.c:111
 msgid "DHCP server configuration"
-msgstr ""
+msgstr "Konfiguracja serwera DHCP "
 
 #: dhcp.c:116
 msgid "Configure the DHCP server by entering the settings information."
-msgstr ""
+msgstr "Skonfiguruj serwer DHCP wprowadzając właściwe ustawienia."
 
 #: dhcp.c:125
 msgid "Enabled"
-msgstr ""
+msgstr "Włączony"
 
 #: dhcp.c:142 domainname.c:43 hostname.c:47 keymap.c:86 main.c:99 main.c:172
 #: main.c:174 netstuff.c:157 netstuff.c:733 netstuff.c:756 networking.c:163
@@ -71,367 +73,367 @@ msgstr ""
 #: networking.c:642 networking.c:653 networking.c:746 passwords.c:89
 #: timezone.c:78
 msgid "OK"
-msgstr ""
+msgstr "OK"
 
 #: dhcp.c:143 domainname.c:43 hostname.c:47 keymap.c:86 netstuff.c:158
 #: netstuff.c:673 netstuff.c:733 netstuff.c:756 networking.c:305
 #: networking.c:410 networking.c:560 networking.c:653 networking.c:746
 #: passwords.c:89 timezone.c:78
 msgid "Cancel"
-msgstr ""
+msgstr "Anuluj"
 
 #: dhcp.c:156
 msgid ""
 "The following fields are invalid:\n"
 "\n"
-msgstr ""
+msgstr "Następujące pola są nieprawidłowe:\n\n"
 
 #: dhcp.c:159
 msgid "Start address"
-msgstr ""
+msgstr "Adres początkowy"
 
 #: dhcp.c:165
 msgid "End address"
-msgstr ""
+msgstr "Adres końcowy"
 
 #: dhcp.c:173 networking.c:755
 msgid "Primary DNS"
-msgstr ""
+msgstr "Główny DNS"
 
 #: dhcp.c:182 networking.c:764
 msgid "Secondary DNS"
-msgstr ""
+msgstr "Pomocniczy DNS"
 
 #: dhcp.c:189
 msgid "Default lease time"
-msgstr ""
+msgstr "Domyślny okres dzierżawy"
 
 #: dhcp.c:195
 msgid "Max. lease time"
-msgstr ""
+msgstr "Maksymalny okres dzierżawy"
 
 #: domainname.c:42 main.c:70
 msgid "Domain name"
-msgstr ""
+msgstr "Nazwa Domeny"
 
 #: domainname.c:42
 msgid "Enter Domain name"
-msgstr ""
+msgstr "Wpisz nazwę Domeny"
 
 #: domainname.c:48
 msgid "Domain name cannot be empty."
-msgstr ""
+msgstr "Nazwa Domeny nie może być pusta"
 
 #: domainname.c:50
 msgid "Domain name cannot contain spaces."
-msgstr ""
+msgstr "Nazwa domeny nie może zawierać spacji."
 
 #: domainname.c:53
 msgid "Domain name may only contain letters, numbers, hyphens and periods."
-msgstr ""
+msgstr "Nazwa domeny może zawierać jedynie litery, cyfry, myślniki i kropki."
 
 #: hostname.c:46 main.c:69
 msgid "Hostname"
-msgstr ""
+msgstr "Nazwa hosta"
 
 #: hostname.c:46
 msgid "Enter the machine's hostname."
-msgstr ""
+msgstr "Wprowadź nazwę hosta."
 
 #: hostname.c:53
 msgid "Hostname cannot be empty."
-msgstr ""
+msgstr "Nazwa hosta nie może być pusta."
 
 #: hostname.c:55
 msgid "Hostname cannot contain spaces."
-msgstr ""
+msgstr "Nazwa hosta nie może zawierać spacji."
 
 #: hostname.c:58
 msgid "Hostname may only contain letters, numbers and hyphens."
-msgstr ""
+msgstr "Nazwa hosta może zawierać tylko litery, cyfry i myślniki."
 
 #: keymap.c:84 main.c:67
 msgid "Keyboard mapping"
-msgstr ""
+msgstr "Mapowanie klawiatury"
 
 #: keymap.c:85
 msgid "Choose the type of keyboard you are using from the list below."
-msgstr ""
+msgstr "Wybierz używany przez siebie typ klawiatury z poniższej listy."
 
 #: main.c:68 timezone.c:77
 msgid "Timezone"
-msgstr ""
+msgstr "Strefa czasowa"
 
 #: main.c:71 networking.c:110 networking.c:115 networking.c:447
 msgid "Networking"
-msgstr ""
+msgstr "Sieć"
 
 #: main.c:72 misc.c:147
 msgid "ISDN"
-msgstr ""
+msgstr "ISDN"
 
 #: main.c:73
 msgid "'root' password"
-msgstr ""
+msgstr "Hasło użytkownika 'root'"
 
 #: main.c:74
 msgid "'admin' password"
-msgstr ""
+msgstr "Hasło użytkownika 'admin'"
 
 #: main.c:90
 msgid "              <Tab>/<Alt-Tab> between elements   |  <Space> selects"
-msgstr ""
+msgstr "              <Tab>/<Alt-Tab> przełącza między elementami   |  <Space> wybiera"
 
 #: main.c:97
 msgid "Section menu"
-msgstr ""
+msgstr "Menu sekcji"
 
 #: main.c:98
 msgid "Select the item you wish to configure."
-msgstr ""
+msgstr "Wybierz element który chcesz skonfigurować."
 
 #: main.c:99
 msgid "Quit"
-msgstr ""
+msgstr "Wyjście"
 
 #: main.c:172
 msgid "Setup is complete."
-msgstr ""
+msgstr "Instalacja zakończona"
 
 #: main.c:174 netstuff.c:733 networking.c:560 networking.c:653
 msgid "Warning"
-msgstr ""
+msgstr "Ostrzeżenie"
 
 #: main.c:175
 msgid ""
 "Initial setup was not entirely complete. You must ensure that Setup is "
 "properly finished by running setup again at the shell."
-msgstr ""
+msgstr "Wstępna konfiguracjia nie została ukończona. Musisz upewnić się, że konfiguracja jest ukończona poprzez ponowne uruchomienie polecenia 'setup' w powłoce."
 
 #: misc.c:62
 #, c-format
 msgid "Unable to write %s/main/hostname.conf"
-msgstr ""
+msgstr "Nie można zapisać %s/main/hostname.conf"
 
 #: misc.c:71
 msgid "Unable to open main hosts file."
-msgstr ""
+msgstr "Nie można otworzyc głównego pliku hosts."
 
 #: misc.c:76
 msgid "Unable to write /etc/hosts."
-msgstr ""
+msgstr "Nie można zapisać /etc/hosts"
 
 #: misc.c:117
 msgid "Unable to write /etc/hosts.deny."
-msgstr ""
+msgstr "Nie można zapisać /etc/hosts.deny"
 
 #: misc.c:125
 msgid "Unable to write /etc/hosts.allow."
-msgstr ""
+msgstr "Nie można zapisać /etc/hosts.allow"
 
 #: misc.c:136
 msgid "Unable to set hostname."
-msgstr ""
+msgstr "Ustawienie nazwy hosta niemożliwe."
 
 #: misc.c:147
 msgid "Scanning and configuring ISDN devices."
-msgstr ""
+msgstr "Wykrywanie i konfiguracja urządzeń ISDN."
 
 #: misc.c:148
 msgid "Unable to scan for ISDN devices."
-msgstr ""
+msgstr "Wykrywanie urządzeń ISDN jest niemożliwe."
 
 #: netstuff.c:86
 #, c-format
 msgid "Interface - %s"
-msgstr ""
+msgstr "Interfejs - %s"
 
 #: netstuff.c:91
 #, c-format
 msgid "Enter the IP address information for the %s interface."
-msgstr ""
+msgstr "Wprowadź ustawienia adresu IP dla interfejsu %s."
 
 #: netstuff.c:103
 msgid "Static"
-msgstr ""
+msgstr "Statyczny"
 
 #: netstuff.c:104
 msgid "DHCP"
-msgstr ""
+msgstr "DHCP"
 
 #: netstuff.c:105
 msgid "PPP DIALUP (PPPoE, modem, ATM ...)"
-msgstr ""
+msgstr "PPP DIALUP (PPPoE, modem, ATM ...)"
 
 #: netstuff.c:113
 msgid "DHCP Hostname:"
-msgstr ""
+msgstr "Nazwa hosta DHCP:"
 
 #: netstuff.c:115
 msgid "Force DHCP MTU:"
-msgstr ""
+msgstr "Wymuś DHCP MTU:"
 
 #: netstuff.c:134
 msgid "IP address:"
-msgstr ""
+msgstr "IP address:"
 
 #: netstuff.c:146
 msgid "Network mask:"
-msgstr ""
+msgstr "Maska podsieci:"
 
 #: netstuff.c:173 networking.c:749
 msgid "The following fields are invalid:"
-msgstr ""
+msgstr "Następujące pola są nieprawidłowe:"
 
 #: netstuff.c:183
 msgid "IP address"
-msgstr ""
+msgstr "IP address"
 
 #: netstuff.c:189
 msgid "Network mask"
-msgstr ""
+msgstr "Maska podsieci"
 
 #: netstuff.c:198
 msgid "DHCP hostname"
-msgstr ""
+msgstr "Nazwa hosta DHCP"
 
 #: netstuff.c:396 netstuff.c:709
 msgid "Unset"
-msgstr ""
+msgstr "Wyłącz"
 
 #: netstuff.c:669
 #, c-format
 msgid "Please choose a networkcard for the following interface - %s."
-msgstr ""
+msgstr "Proszę wybrać kartę sieciową dla następującego interfejsu - %s"
 
 #: netstuff.c:672
 msgid "Extended Network Menu"
-msgstr ""
+msgstr "Rozszerzone Menu Sieci"
 
 #: netstuff.c:673 networking.c:520
 msgid "Select"
-msgstr ""
+msgstr "Wybierz"
 
 #: netstuff.c:673
 msgid "Identify"
-msgstr ""
+msgstr "Zidentyfikuj"
 
 #: netstuff.c:678
 msgid "Device Identification"
-msgstr ""
+msgstr "Identyfikacja urządzenia"
 
 #: netstuff.c:678
 msgid "The lights on the selected port should flash now for 10 seconds..."
-msgstr ""
+msgstr "Kontrolki na wybranym porcie powinny migotać przez następne 10 sekund..."
 
 #: netstuff.c:679
 msgid "Identification is not supported by this interface."
-msgstr ""
+msgstr "Ten interfejs nie wspiera identyfikacji."
 
 #: netstuff.c:691
 msgid "There are no unassigned interfaces on your system."
-msgstr ""
+msgstr "Nie ma już nieprzydzielonych interfejsów w systemie."
 
 #: netstuff.c:732
 #, c-format
 msgid "Do you really want to remove the assigned %s interface?"
-msgstr ""
+msgstr "Na pewno chcesz usunąć przydzielony interfejs %s ?"
 
 #: netstuff.c:755
 msgid "Select network driver"
-msgstr ""
+msgstr "Wybierz sterownik karty sieciowej"
 
 #: netstuff.c:755
 msgid "Set additional module parameters"
-msgstr ""
+msgstr "Ustaw dodatkowe parametry modułu"
 
 #: netstuff.c:762
 msgid "Loading module..."
-msgstr ""
+msgstr "Wczytywanie modułu..."
 
 #: netstuff.c:777
 msgid "Unable to load driver module."
-msgstr ""
+msgstr "Nie da się wczytać modułu."
 
 #: netstuff.c:780
 msgid "Module name cannot be blank."
-msgstr ""
+msgstr "Nazwa modułu nie może być pusta."
 
 #: networking.c:110
 msgid "Stopping network..."
-msgstr ""
+msgstr "Zatrzymywanie sieci..."
 
 #: networking.c:115
 msgid "Restarting network..."
-msgstr ""
+msgstr "Ponowne uruchamianie sieci..."
 
 #: networking.c:146
 msgid "No GREEN interface assigned."
-msgstr ""
+msgstr "Interfejs GREEN nie został przypisany."
 
 #: networking.c:152
 msgid "Missing an IP address on GREEN."
-msgstr ""
+msgstr "Brak adresu IP na GREEN."
 
 #: networking.c:163
 msgid "Error"
-msgstr ""
+msgstr "Błąd"
 
 #: networking.c:163
 msgid "Ignore"
-msgstr ""
+msgstr "Ignoruj"
 
 #: networking.c:164
 msgid "No RED interface assigned."
-msgstr ""
+msgstr "Interfejs RED nie został przypisany."
 
 #: networking.c:173
 msgid "Missing an IP address on RED."
-msgstr ""
+msgstr "Brak adresu IP na RED."
 
 #: networking.c:183
 msgid "No ORANGE interface assigned."
-msgstr ""
+msgstr "Interfejs ORANGE nie został przypisany."
 
 #: networking.c:189
 msgid "Missing an IP address on ORANGE."
-msgstr ""
+msgstr "Brak adresu IP na ORANGE."
 
 #: networking.c:199
 msgid "No BLUE interface assigned."
-msgstr ""
+msgstr "Interfejs BLUE nie został przypisany."
 
 #: networking.c:205
 msgid "Missing an IP address on BLUE."
-msgstr ""
+msgstr "Brak adresu IP na BLUE."
 
 #: networking.c:217
 msgid "Misssing DNS."
-msgstr ""
+msgstr "Brakuje DNS."
 
 #: networking.c:224
 msgid "Missing Default Gateway."
-msgstr ""
+msgstr "Brakuje Bramy Domyślnej."
 
 #: networking.c:237 networking.c:304
 msgid "Network configuration type"
-msgstr ""
+msgstr "Rodzaj konfiguracji sieci"
 
 #: networking.c:238 networking.c:409
 msgid "Drivers and card assignments"
-msgstr ""
+msgstr "Przydziały sterowników i kart"
 
 #: networking.c:239 networking.c:640
 msgid "Address settings"
-msgstr ""
+msgstr "Ustawienia adresu"
 
 #: networking.c:240 networking.c:743
 msgid "DNS and Gateway settings"
-msgstr ""
+msgstr "Ustawienia DNS i Bramy"
 
 #: networking.c:260
 msgid "When configuration is complete, a network restart will be required."
-msgstr ""
+msgstr "Po ukończeniu konfiguracji wymagane będzie ponowne uruchomienie sieci."
 
 #: networking.c:267
 #, c-format
@@ -439,15 +441,15 @@ msgid ""
 "Current config: %s\n"
 "\n"
 "%s"
-msgstr ""
+msgstr "Obecna konfiguracja: %s\n\n%s"
 
 #: networking.c:268
 msgid "Network configuration menu"
-msgstr ""
+msgstr "Menu konfiguracji sieci"
 
 #: networking.c:269 networking.c:520 networking.c:642
 msgid "Done"
-msgstr ""
+msgstr "Zrobione"
 
 #: networking.c:300
 #, c-format
@@ -456,7 +458,7 @@ msgid ""
 "list those interfaces which have ethernet attached. If you change this "
 "setting, a network restart will be required, and you will have to "
 "reconfigure the network driver assignments."
-msgstr ""
+msgstr "Wybierz konfigurację sieci dla %s. Poniższe typy konfiguracji wyświetlają interfejsy z przyłączonym ethernetem. Jeśli zmienisz te ustawienia, wymagany będzie restart sieci, i trzeba będzie zrekonfigurować przydziały sterowników kart sieciowych. "
 
 #: networking.c:307
 #, c-format
@@ -464,35 +466,35 @@ msgid ""
 "Not enough netcards for your choice.\n"
 "\n"
 "Needed: %d - Available: %d\n"
-msgstr ""
+msgstr "Niewystarczająca liczba kart sieciowych.\n\nPotrzebne: %d - Dostępne: %d\n"
 
 #: networking.c:359
 msgid ""
 "Configure network drivers, and which interface each card is assigned to. The current configuration is as follows:\n"
 "\n"
-msgstr ""
+msgstr "Skonfiguruj sterowniki kart sieciowych, i przydziel karty do odpowiednich interfejsów. Obecna konfiguracja wygląda tak:\n\n"
 
 #: networking.c:408
 msgid "Do you wish to change these settings?"
-msgstr ""
+msgstr "Czy chcesz zmienić te ustawienia ?"
 
 #: networking.c:447
 msgid "Restarting non-local network..."
-msgstr ""
+msgstr "Ponowne uruchamianie sieci innych, niż lokalna..."
 
 #: networking.c:464
 msgid ""
 "Please choose the interface you wish to change.\n"
 "\n"
-msgstr ""
+msgstr "Wybierz interfejs, który chcesz zmienić.\n\n"
 
 #: networking.c:519
 msgid "Assigned Cards"
-msgstr ""
+msgstr "Przypisane Karty"
 
 #: networking.c:520
 msgid "Remove"
-msgstr ""
+msgstr "Usuń"
 
 #: networking.c:556 networking.c:649
 #, c-format
@@ -501,84 +503,84 @@ msgid ""
 "connection to the %s machine will be broken, and you will have to reconnect "
 "on the new IP. This is a risky operation, and should only be attempted if "
 "you have physical access to the machine, should something go wrong."
-msgstr ""
+msgstr "Jeśli zmienisz ten adres IP, a jesteś zalogowany zdalnie, Twoje połączenie do maszyny %s zostanie zerwane, i trzeba będzie połączyć się ponownie na nowy adres IP. To ryzykowna operacja, która powinna byc podejmowana tylko w przypadku posiadania bezpośredniego, fizycznego dostępu do maszyny na wypadek, gdyby coś poszło źle."
 
 #: networking.c:641
 msgid "Select the interface you wish to reconfigure."
-msgstr ""
+msgstr "Zaznacz interfejs, który chcesz zrekonfigurować."
 
 #: networking.c:729
 msgid "Default gateway:"
-msgstr ""
+msgstr "Brama domyślna:"
 
 #: networking.c:744
 msgid ""
 "Enter the DNS and gateway information. These settings are used only with "
 "Static IP (and DHCP if DNS set) on the RED interface."
-msgstr ""
+msgstr "Wprowadź informacje o serwerze DNS i bramie. Te ustawienia stosuje się tylko do statycznego IP (i DHCP, gdzie DNS ustawia się ręcznie) na interfejsie RED."
 
 #: networking.c:773
 msgid "Default gateway"
-msgstr ""
+msgstr "Brama domyślna"
 
 #: networking.c:780
 msgid "Secondary DNS specified without a Primary DNS"
-msgstr ""
+msgstr "Podano adres Zapasowego DNS bez podania adresu Podstawowego DNS."
 
 #: passwords.c:33
 msgid ""
 "Enter the 'root' user password. Login as this user for commandline access."
-msgstr ""
+msgstr "Wprowadź hasło użytkownika 'root'. Zaloguj się jako ten użytkownik, aby uzyskać dostęp do linii poleceń."
 
 #: passwords.c:38 passwords.c:61
 msgid "Setting password"
-msgstr ""
+msgstr "Ustawienie hasła"
 
 #: passwords.c:38
 msgid "Setting 'root' password...."
-msgstr ""
+msgstr "Ustawianie hasła użytkownika 'root'...."
 
 #: passwords.c:39
 msgid "Problem setting 'root' password."
-msgstr ""
+msgstr "Problem z ustawieniem hasła użytkownika 'root'."
 
 #: passwords.c:53
 #, c-format
 msgid ""
 "Enter %s 'admin' user password. This is the user to use for logging into the"
 " %s web administration pages."
-msgstr ""
+msgstr "Wprowadź haslo użytkownika 'admin' systemu %s. Zalogowanie się na tego użytkownika umożliwi dostęp do administracyjnej strony WWW %s."
 
 #: passwords.c:60
 #, c-format
 msgid "Setting %s 'admin' user password..."
-msgstr ""
+msgstr "Ustawianie hasła użytkownika 'admin' systemu %s..."
 
 #: passwords.c:62
 #, c-format
 msgid "Problem setting %s 'admin' user password."
-msgstr ""
+msgstr "Problem z ustawieniem hasła użytkownika 'admin' systemu %s."
 
 #: passwords.c:76
 msgid "Password:"
-msgstr ""
+msgstr "Hasło:"
 
 #: passwords.c:77
 msgid "Again:"
-msgstr ""
+msgstr "Ponownie:"
 
 #: passwords.c:95
 msgid "Password cannot be blank."
-msgstr ""
+msgstr "Hasło nie może być puste."
 
 #: passwords.c:102
 msgid "Passwords do not match."
-msgstr ""
+msgstr "Hasła nie są zgodne."
 
 #: passwords.c:109
 msgid "Password cannot contain spaces."
-msgstr ""
+msgstr "Hasło nie może zawierać spacji."
 
 #: timezone.c:77
 msgid "Choose the timezone you are in from the list below."
-msgstr ""
+msgstr "Wybierz strefę czasową w której się znajdujesz z listy poniżej."

diff --git a/src/setup/po/pt_BR.po b/src/setup/po/pt_BR.po
index a16955b39a2b3a5f3c602f12f2ffdbc36d6344d2..1cb5bc6b7ae2269bc0ea66e89caa634f54863d69 100644 (file)
--- a/src/setup/po/pt_BR.po
+++ b/src/setup/po/pt_BR.po
@@ -3,13 +3,14 @@
 # This file is distributed under the same license as the PACKAGE package.
 # 
 # Translators:
+# Rafael Tavares <rafael@ibinetwork.com.br>, 2015
 msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2014-08-21 15:12+0000\n"
-"PO-Revision-Date: 2014-08-21 15:13+0000\n"
-"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"PO-Revision-Date: 2015-01-22 20:19+0000\n"
+"Last-Translator: Rafael Tavares <rafael@ibinetwork.com.br>\n"
 "Language-Team: Portuguese (Brazil) (http://www.transifex.com/projects/p/ipfire/language/pt_BR/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -19,27 +20,27 @@ msgstr ""
 
 #: dhcp.c:50
 msgid "Start address:"
-msgstr ""
+msgstr "Endereço de Inicial:"
 
 #: dhcp.c:51
 msgid "End address:"
-msgstr ""
+msgstr "Endereço final:"
 
 #: dhcp.c:52 networking.c:717
 msgid "Primary DNS:"
-msgstr ""
+msgstr "DNS Primário:"
 
 #: dhcp.c:53 networking.c:723
 msgid "Secondary DNS:"
-msgstr ""
+msgstr "DNS Secundário:"
 
 #: dhcp.c:54
 msgid "Default lease (mins):"
-msgstr ""
+msgstr "Tempo padrão (mins):"
 
 #: dhcp.c:55
 msgid "Max lease (mins):"
-msgstr ""
+msgstr "Tempo máximo (mins)"
 
 #: dhcp.c:56
 msgid "Domain name suffix:"
@@ -51,19 +52,19 @@ msgstr ""
 #: networking.c:442 networking.c:552 networking.c:603 networking.c:610
 #: networking.c:713 timezone.c:63
 msgid "Unable to open settings file"
-msgstr ""
+msgstr "Não foi possível abrir o arquivo de configurações"
 
 #: dhcp.c:111
 msgid "DHCP server configuration"
-msgstr ""
+msgstr "Configurar servidor DHCP"
 
 #: dhcp.c:116
 msgid "Configure the DHCP server by entering the settings information."
-msgstr ""
+msgstr "Configurar servidor DHCP digitando as informações de configuração"
 
 #: dhcp.c:125
 msgid "Enabled"
-msgstr ""
+msgstr "Habilitado"
 
 #: dhcp.c:142 domainname.c:43 hostname.c:47 keymap.c:86 main.c:99 main.c:172
 #: main.c:174 netstuff.c:157 netstuff.c:733 netstuff.c:756 networking.c:163
@@ -71,14 +72,14 @@ msgstr ""
 #: networking.c:642 networking.c:653 networking.c:746 passwords.c:89
 #: timezone.c:78
 msgid "OK"
-msgstr ""
+msgstr "Ok"
 
 #: dhcp.c:143 domainname.c:43 hostname.c:47 keymap.c:86 netstuff.c:158
 #: netstuff.c:673 netstuff.c:733 netstuff.c:756 networking.c:305
 #: networking.c:410 networking.c:560 networking.c:653 networking.c:746
 #: passwords.c:89 timezone.c:78
 msgid "Cancel"
-msgstr ""
+msgstr "Cancelar"
 
 #: dhcp.c:156
 msgid ""
@@ -88,31 +89,31 @@ msgstr ""
 
 #: dhcp.c:159
 msgid "Start address"
-msgstr ""
+msgstr "Endereço de Inicial"
 
 #: dhcp.c:165
 msgid "End address"
-msgstr ""
+msgstr "Endereço final"
 
 #: dhcp.c:173 networking.c:755
 msgid "Primary DNS"
-msgstr ""
+msgstr "DNS Primário"
 
 #: dhcp.c:182 networking.c:764
 msgid "Secondary DNS"
-msgstr ""
+msgstr "DNS Secundário"
 
 #: dhcp.c:189
 msgid "Default lease time"
-msgstr ""
+msgstr "Tempo padrão"
 
 #: dhcp.c:195
 msgid "Max. lease time"
-msgstr ""
+msgstr "Tempo máximo padrão"
 
 #: domainname.c:42 main.c:70
 msgid "Domain name"
-msgstr ""
+msgstr "Domínio "
 
 #: domainname.c:42
 msgid "Enter Domain name"
@@ -132,7 +133,7 @@ msgstr ""
 
 #: hostname.c:46 main.c:69
 msgid "Hostname"
-msgstr ""
+msgstr "Hostname"
 
 #: hostname.c:46
 msgid "Enter the machine's hostname."
@@ -152,7 +153,7 @@ msgstr ""
 
 #: keymap.c:84 main.c:67
 msgid "Keyboard mapping"
-msgstr ""
+msgstr "Selecione seu teclado"
 
 #: keymap.c:85
 msgid "Choose the type of keyboard you are using from the list below."
@@ -160,7 +161,7 @@ msgstr ""
 
 #: main.c:68 timezone.c:77
 msgid "Timezone"
-msgstr ""
+msgstr "Fuso horário "
 
 #: main.c:71 networking.c:110 networking.c:115 networking.c:447
 msgid "Networking"
@@ -168,15 +169,15 @@ msgstr ""
 
 #: main.c:72 misc.c:147
 msgid "ISDN"
-msgstr ""
+msgstr "ISDN"
 
 #: main.c:73
 msgid "'root' password"
-msgstr ""
+msgstr "senha ´'root'"
 
 #: main.c:74
 msgid "'admin' password"
-msgstr ""
+msgstr "senha 'admin'"
 
 #: main.c:90
 msgid "              <Tab>/<Alt-Tab> between elements   |  <Space> selects"
@@ -188,19 +189,19 @@ msgstr ""
 
 #: main.c:98
 msgid "Select the item you wish to configure."
-msgstr ""
+msgstr "Selecione um item para configurar."
 
 #: main.c:99
 msgid "Quit"
-msgstr ""
+msgstr "Sair"
 
 #: main.c:172
 msgid "Setup is complete."
-msgstr ""
+msgstr "Configuração completa."
 
 #: main.c:174 netstuff.c:733 networking.c:560 networking.c:653
 msgid "Warning"
-msgstr ""
+msgstr "Atenção"
 
 #: main.c:175
 msgid ""
@@ -211,7 +212,7 @@ msgstr ""
 #: misc.c:62
 #, c-format
 msgid "Unable to write %s/main/hostname.conf"
-msgstr ""
+msgstr "Não foi possível salvar %s/main/hostname.conf"
 
 #: misc.c:71
 msgid "Unable to open main hosts file."
@@ -219,15 +220,15 @@ msgstr ""
 
 #: misc.c:76
 msgid "Unable to write /etc/hosts."
-msgstr ""
+msgstr "Não foi possível salvar /etc/hosts."
 
 #: misc.c:117
 msgid "Unable to write /etc/hosts.deny."
-msgstr ""
+msgstr "Não foi possível salvar /etc/hosts.deny."
 
 #: misc.c:125
 msgid "Unable to write /etc/hosts.allow."
-msgstr ""
+msgstr "Não foi possível salvar /etc/hosts.allow."
 
 #: misc.c:136
 msgid "Unable to set hostname."
@@ -244,7 +245,7 @@ msgstr ""
 #: netstuff.c:86
 #, c-format
 msgid "Interface - %s"
-msgstr ""
+msgstr "Interface - %s"
 
 #: netstuff.c:91
 #, c-format
@@ -253,15 +254,15 @@ msgstr ""
 
 #: netstuff.c:103
 msgid "Static"
-msgstr ""
+msgstr "Estático "
 
 #: netstuff.c:104
 msgid "DHCP"
-msgstr ""
+msgstr "Automático "
 
 #: netstuff.c:105
 msgid "PPP DIALUP (PPPoE, modem, ATM ...)"
-msgstr ""
+msgstr "Discador PPP (PPPoE, modem, ATM ...)"
 
 #: netstuff.c:113
 msgid "DHCP Hostname:"
@@ -273,11 +274,11 @@ msgstr ""
 
 #: netstuff.c:134
 msgid "IP address:"
-msgstr ""
+msgstr "Endereço IP:"
 
 #: netstuff.c:146
 msgid "Network mask:"
-msgstr ""
+msgstr "Mascara de rede:"
 
 #: netstuff.c:173 networking.c:749
 msgid "The following fields are invalid:"
@@ -285,11 +286,11 @@ msgstr ""
 
 #: netstuff.c:183
 msgid "IP address"
-msgstr ""
+msgstr "Endereço IP"
 
 #: netstuff.c:189
 msgid "Network mask"
-msgstr ""
+msgstr "Marcara de rede"
 
 #: netstuff.c:198
 msgid "DHCP hostname"
@@ -310,11 +311,11 @@ msgstr ""
 
 #: netstuff.c:673 networking.c:520
 msgid "Select"
-msgstr ""
+msgstr "Selecione"
 
 #: netstuff.c:673
 msgid "Identify"
-msgstr ""
+msgstr "Identifique"
 
 #: netstuff.c:678
 msgid "Device Identification"
@@ -347,7 +348,7 @@ msgstr ""
 
 #: netstuff.c:762
 msgid "Loading module..."
-msgstr ""
+msgstr "Carregando modulo..."
 
 #: netstuff.c:777
 msgid "Unable to load driver module."
@@ -359,75 +360,75 @@ msgstr ""
 
 #: networking.c:110
 msgid "Stopping network..."
-msgstr ""
+msgstr "Parando a rede..."
 
 #: networking.c:115
 msgid "Restarting network..."
-msgstr ""
+msgstr "Reiniciando a rede..."
 
 #: networking.c:146
 msgid "No GREEN interface assigned."
-msgstr ""
+msgstr "Nenhuma interface VERDE definida."
 
 #: networking.c:152
 msgid "Missing an IP address on GREEN."
-msgstr ""
+msgstr "Faltando endereço IP na interface VERDE."
 
 #: networking.c:163
 msgid "Error"
-msgstr ""
+msgstr "Erro"
 
 #: networking.c:163
 msgid "Ignore"
-msgstr ""
+msgstr "Ignorar"
 
 #: networking.c:164
 msgid "No RED interface assigned."
-msgstr ""
+msgstr "Nenhuma interface VERMELHA definida."
 
 #: networking.c:173
 msgid "Missing an IP address on RED."
-msgstr ""
+msgstr "Faltando endereço IP na interface VERMELHA."
 
 #: networking.c:183
 msgid "No ORANGE interface assigned."
-msgstr ""
+msgstr "Nenhuma interface LARANJA definida."
 
 #: networking.c:189
 msgid "Missing an IP address on ORANGE."
-msgstr ""
+msgstr "Faltando endereço IP na interface LARANJA."
 
 #: networking.c:199
 msgid "No BLUE interface assigned."
-msgstr ""
+msgstr "Nenhuma interface AZUL definida."
 
 #: networking.c:205
 msgid "Missing an IP address on BLUE."
-msgstr ""
+msgstr "Faltando endereço IP na interface AZUL."
 
 #: networking.c:217
 msgid "Misssing DNS."
-msgstr ""
+msgstr "Faltando DNS."
 
 #: networking.c:224
 msgid "Missing Default Gateway."
-msgstr ""
+msgstr "Faltando Gateway Padrão."
 
 #: networking.c:237 networking.c:304
 msgid "Network configuration type"
-msgstr ""
+msgstr "Tipo de configuração de rede"
 
 #: networking.c:238 networking.c:409
 msgid "Drivers and card assignments"
-msgstr ""
+msgstr "Definir Drivers e Placas"
 
 #: networking.c:239 networking.c:640
 msgid "Address settings"
-msgstr ""
+msgstr "Configurar endereços"
 
 #: networking.c:240 networking.c:743
 msgid "DNS and Gateway settings"
-msgstr ""
+msgstr "Configurar Gateway e DNS"
 
 #: networking.c:260
 msgid "When configuration is complete, a network restart will be required."
@@ -439,7 +440,7 @@ msgid ""
 "Current config: %s\n"
 "\n"
 "%s"
-msgstr ""
+msgstr "Configuração atual: %s\n\n%s"
 
 #: networking.c:268
 msgid "Network configuration menu"
@@ -447,7 +448,7 @@ msgstr ""
 
 #: networking.c:269 networking.c:520 networking.c:642
 msgid "Done"
-msgstr ""
+msgstr "Pronto"
 
 #: networking.c:300
 #, c-format
@@ -488,11 +489,11 @@ msgstr ""
 
 #: networking.c:519
 msgid "Assigned Cards"
-msgstr ""
+msgstr "Placas Definidas"
 
 #: networking.c:520
 msgid "Remove"
-msgstr ""
+msgstr "Remover"
 
 #: networking.c:556 networking.c:649
 #, c-format
@@ -509,7 +510,7 @@ msgstr ""
 
 #: networking.c:729
 msgid "Default gateway:"
-msgstr ""
+msgstr "Gateway padrão:"
 
 #: networking.c:744
 msgid ""
@@ -519,7 +520,7 @@ msgstr ""
 
 #: networking.c:773
 msgid "Default gateway"
-msgstr ""
+msgstr "Gateway padrão"
 
 #: networking.c:780
 msgid "Secondary DNS specified without a Primary DNS"
@@ -532,15 +533,15 @@ msgstr ""
 
 #: passwords.c:38 passwords.c:61
 msgid "Setting password"
-msgstr ""
+msgstr "Configurar senha"
 
 #: passwords.c:38
 msgid "Setting 'root' password...."
-msgstr ""
+msgstr "Configurar senha 'root'"
 
 #: passwords.c:39
 msgid "Problem setting 'root' password."
-msgstr ""
+msgstr "Problema ao configurar senha 'root'"
 
 #: passwords.c:53
 #, c-format
@@ -561,24 +562,24 @@ msgstr ""
 
 #: passwords.c:76
 msgid "Password:"
-msgstr ""
+msgstr "Senha:"
 
 #: passwords.c:77
 msgid "Again:"
-msgstr ""
+msgstr "Novamente:"
 
 #: passwords.c:95
 msgid "Password cannot be blank."
-msgstr ""
+msgstr "A senha não pode estar em branco."
 
 #: passwords.c:102
 msgid "Passwords do not match."
-msgstr ""
+msgstr "As senhas não coincidem."
 
 #: passwords.c:109
 msgid "Password cannot contain spaces."
-msgstr ""
+msgstr "A senha não pode conter espaços."
 
 #: timezone.c:77
 msgid "Choose the timezone you are in from the list below."
-msgstr ""
+msgstr "Selecione seu fuso horário na lista abaixo."

diff --git a/src/setup/po/ro_RO.po b/src/setup/po/ro_RO.po
index e85d2f7bde374fb385dfc909cf41b831b0760fd1..9bf182c38860f58851f37d7c17e0c860d7b43732 100644 (file)
--- a/src/setup/po/ro_RO.po
+++ b/src/setup/po/ro_RO.po
@@ -3,13 +3,14 @@
 # This file is distributed under the same license as the PACKAGE package.
 # 
 # Translators:
+# Andrei Burdea <ragulka@gmail.com>, 2015
 msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2014-08-21 15:12+0000\n"
-"PO-Revision-Date: 2014-08-21 15:13+0000\n"
-"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"PO-Revision-Date: 2015-01-20 09:08+0000\n"
+"Last-Translator: Andrei Burdea <ragulka@gmail.com>\n"
 "Language-Team: Romanian (Romania) (http://www.transifex.com/projects/p/ipfire/language/ro_RO/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -19,31 +20,31 @@ msgstr ""
 
 #: dhcp.c:50
 msgid "Start address:"
-msgstr ""
+msgstr "Adresa de Inceput"
 
 #: dhcp.c:51
 msgid "End address:"
-msgstr ""
+msgstr "Adresa de Final"
 
 #: dhcp.c:52 networking.c:717
 msgid "Primary DNS:"
-msgstr ""
+msgstr "Primul Server de Nume - NS1"
 
 #: dhcp.c:53 networking.c:723
 msgid "Secondary DNS:"
-msgstr ""
+msgstr "Al Doilea Server de Nume - NS2"
 
 #: dhcp.c:54
 msgid "Default lease (mins):"
-msgstr ""
+msgstr "Alocarea de baza (minute)"
 
 #: dhcp.c:55
 msgid "Max lease (mins):"
-msgstr ""
+msgstr "Alocare Maxima (minute)"
 
 #: dhcp.c:56
 msgid "Domain name suffix:"
-msgstr ""
+msgstr "Sufix Nume Domeniu"
 
 #: dhcp.c:86 dhcp.c:93 dhcp.c:101 domainname.c:34 hostname.c:37 keymap.c:70
 #: misc.c:40 misc.c:52 netstuff.c:377 netstuff.c:566 netstuff.c:704
@@ -51,19 +52,19 @@ msgstr ""
 #: networking.c:442 networking.c:552 networking.c:603 networking.c:610
 #: networking.c:713 timezone.c:63
 msgid "Unable to open settings file"
-msgstr ""
+msgstr "Fisier de setari imposibil de deschis"
 
 #: dhcp.c:111
 msgid "DHCP server configuration"
-msgstr ""
+msgstr "Conficurearea serverului DHCP"
 
 #: dhcp.c:116
 msgid "Configure the DHCP server by entering the settings information."
-msgstr ""
+msgstr "Configureaza serverul DHCP introducand informatiile de setare"
 
 #: dhcp.c:125
 msgid "Enabled"
-msgstr ""
+msgstr "Activat"
 
 #: dhcp.c:142 domainname.c:43 hostname.c:47 keymap.c:86 main.c:99 main.c:172
 #: main.c:174 netstuff.c:157 netstuff.c:733 netstuff.c:756 networking.c:163
@@ -71,151 +72,151 @@ msgstr ""
 #: networking.c:642 networking.c:653 networking.c:746 passwords.c:89
 #: timezone.c:78
 msgid "OK"
-msgstr ""
+msgstr "OK"
 
 #: dhcp.c:143 domainname.c:43 hostname.c:47 keymap.c:86 netstuff.c:158
 #: netstuff.c:673 netstuff.c:733 netstuff.c:756 networking.c:305
 #: networking.c:410 networking.c:560 networking.c:653 networking.c:746
 #: passwords.c:89 timezone.c:78
 msgid "Cancel"
-msgstr ""
+msgstr "Renunta"
 
 #: dhcp.c:156
 msgid ""
 "The following fields are invalid:\n"
 "\n"
-msgstr ""
+msgstr "Urmatoarele campuri sunt incorecte\n\n"
 
 #: dhcp.c:159
 msgid "Start address"
-msgstr ""
+msgstr "Adresa de Inceput"
 
 #: dhcp.c:165
 msgid "End address"
-msgstr ""
+msgstr "Adresa de Final"
 
 #: dhcp.c:173 networking.c:755
 msgid "Primary DNS"
-msgstr ""
+msgstr "Primul Server de Nume - NS1"
 
 #: dhcp.c:182 networking.c:764
 msgid "Secondary DNS"
-msgstr ""
+msgstr "Al Doilea Server de Nume - NS2"
 
 #: dhcp.c:189
 msgid "Default lease time"
-msgstr ""
+msgstr "Timpul pentru alocarea de baza"
 
 #: dhcp.c:195
 msgid "Max. lease time"
-msgstr ""
+msgstr "Timpul maxim pentru alocare"
 
 #: domainname.c:42 main.c:70
 msgid "Domain name"
-msgstr ""
+msgstr "Nume Domeniu"
 
 #: domainname.c:42
 msgid "Enter Domain name"
-msgstr ""
+msgstr "Introduceti Nume Domeniu"
 
 #: domainname.c:48
 msgid "Domain name cannot be empty."
-msgstr ""
+msgstr "Nume Domeniu nu poate fi gol"
 
 #: domainname.c:50
 msgid "Domain name cannot contain spaces."
-msgstr ""
+msgstr "Nume Domeniu nu poate contine spatii"
 
 #: domainname.c:53
 msgid "Domain name may only contain letters, numbers, hyphens and periods."
-msgstr ""
+msgstr "Nume Domeniu poate contine doar litere, numere, cratime sau paranteze"
 
 #: hostname.c:46 main.c:69
 msgid "Hostname"
-msgstr ""
+msgstr "Nume Gazda - HOST"
 
 #: hostname.c:46
 msgid "Enter the machine's hostname."
-msgstr ""
+msgstr "Introduceti Nume Gazda - HOST"
 
 #: hostname.c:53
 msgid "Hostname cannot be empty."
-msgstr ""
+msgstr "Nume Gazda - HOST - nu poate fi gol"
 
 #: hostname.c:55
 msgid "Hostname cannot contain spaces."
-msgstr ""
+msgstr "Nume Gazda - HOST - nu poate contine spatii"
 
 #: hostname.c:58
 msgid "Hostname may only contain letters, numbers and hyphens."
-msgstr ""
+msgstr "Nume Gazda - HOST - poate contine doar litere, numere si cratime"
 
 #: keymap.c:84 main.c:67
 msgid "Keyboard mapping"
-msgstr ""
+msgstr "Cartografiere Tastatura - tipul de tastatura"
 
 #: keymap.c:85
 msgid "Choose the type of keyboard you are using from the list below."
-msgstr ""
+msgstr "Alegeti tipul de tastatura pe care o folositi din lista urmatoare"
 
 #: main.c:68 timezone.c:77
 msgid "Timezone"
-msgstr ""
+msgstr "Fus Orar"
 
 #: main.c:71 networking.c:110 networking.c:115 networking.c:447
 msgid "Networking"
-msgstr ""
+msgstr "Retea"
 
 #: main.c:72 misc.c:147
 msgid "ISDN"
-msgstr ""
+msgstr "ISDN"
 
 #: main.c:73
 msgid "'root' password"
-msgstr ""
+msgstr "Parola pentru utilizator 'root'"
 
 #: main.c:74
 msgid "'admin' password"
-msgstr ""
+msgstr "Parola pentru utilizator 'admin'"
 
 #: main.c:90
 msgid "              <Tab>/<Alt-Tab> between elements   |  <Space> selects"
-msgstr ""
+msgstr "<Tab>/<Alt-Tab> pentru comutare intre elemente | <Space> selecteaza"
 
 #: main.c:97
 msgid "Section menu"
-msgstr ""
+msgstr "Meniu Sectiuni"
 
 #: main.c:98
 msgid "Select the item you wish to configure."
-msgstr ""
+msgstr "Selectati articolul pe care doriti sa-l configurati"
 
 #: main.c:99
 msgid "Quit"
-msgstr ""
+msgstr "Iesire"
 
 #: main.c:172
 msgid "Setup is complete."
-msgstr ""
+msgstr "Setup-ul s-a incheiat"
 
 #: main.c:174 netstuff.c:733 networking.c:560 networking.c:653
 msgid "Warning"
-msgstr ""
+msgstr "Atentie"
 
 #: main.c:175
 msgid ""
 "Initial setup was not entirely complete. You must ensure that Setup is "
 "properly finished by running setup again at the shell."
-msgstr ""
+msgstr "Setup-ul initial nu s-a finalizat. Trebuie sa va asigurati ca Setup-ul s-a incheiat corect ruland din nou operatiunea din shell."
 
 #: misc.c:62
 #, c-format
 msgid "Unable to write %s/main/hostname.conf"
-msgstr ""
+msgstr "%s/main/hostname.conf nu a putut fi scris"
 
 #: misc.c:71
 msgid "Unable to open main hosts file."
-msgstr ""
+msgstr "fisierul principal de hosts nu a putut fi deschis"
 
 #: misc.c:76
 msgid "Unable to write /etc/hosts."

diff --git a/src/setup/po/ru.po b/src/setup/po/ru.po
index 34b1ac42b8c53d087ce050be571216de0e3faa96..1a03f0bbe1d941c1db3d6062b765567d20954b24 100644 (file)
--- a/src/setup/po/ru.po
+++ b/src/setup/po/ru.po
@@ -3,14 +3,15 @@
 # This file is distributed under the same license as the PACKAGE package.
 # 
 # Translators:
+# Andrei Skipin <skian2007@yandex.ru>, 2014
 # bubnov_pi <ipfire@bubnov.su>, 2014
 msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2014-08-21 15:12+0000\n"
-"PO-Revision-Date: 2014-08-21 15:13+0000\n"
-"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"PO-Revision-Date: 2014-12-10 10:22+0000\n"
+"Last-Translator: Andrei Skipin <skian2007@yandex.ru>\n"
 "Language-Team: Russian (http://www.transifex.com/projects/p/ipfire/language/ru/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -189,19 +190,19 @@ msgstr ""
 
 #: main.c:98
 msgid "Select the item you wish to configure."
-msgstr ""
+msgstr "Выберите пункт меню для настройки"
 
 #: main.c:99
 msgid "Quit"
-msgstr ""
+msgstr "Выход"
 
 #: main.c:172
 msgid "Setup is complete."
-msgstr ""
+msgstr "Установка завершена"
 
 #: main.c:174 netstuff.c:733 networking.c:560 networking.c:653
 msgid "Warning"
-msgstr ""
+msgstr "Предупреждение"
 
 #: main.c:175
 msgid ""
@@ -220,15 +221,15 @@ msgstr ""
 
 #: misc.c:76
 msgid "Unable to write /etc/hosts."
-msgstr ""
+msgstr "Недоступна запись в /etc/hosts."
 
 #: misc.c:117
 msgid "Unable to write /etc/hosts.deny."
-msgstr ""
+msgstr "Недоступна запись в /etc/hosts.deny."
 
 #: misc.c:125
 msgid "Unable to write /etc/hosts.allow."
-msgstr ""
+msgstr "Недоступна запись в /etc/hosts.allow."
 
 #: misc.c:136
 msgid "Unable to set hostname."
@@ -236,7 +237,7 @@ msgstr ""
 
 #: misc.c:147
 msgid "Scanning and configuring ISDN devices."
-msgstr ""
+msgstr "Сканирование и конфигурирование ISDN устройств."
 
 #: misc.c:148
 msgid "Unable to scan for ISDN devices."
@@ -245,7 +246,7 @@ msgstr ""
 #: netstuff.c:86
 #, c-format
 msgid "Interface - %s"
-msgstr ""
+msgstr "Интерфейс - %s"
 
 #: netstuff.c:91
 #, c-format
@@ -254,7 +255,7 @@ msgstr ""
 
 #: netstuff.c:103
 msgid "Static"
-msgstr ""
+msgstr "Статический"
 
 #: netstuff.c:104
 msgid "DHCP"
@@ -266,7 +267,7 @@ msgstr ""
 
 #: netstuff.c:113
 msgid "DHCP Hostname:"
-msgstr ""
+msgstr "Имя хоста DHCP:"
 
 #: netstuff.c:115
 msgid "Force DHCP MTU:"
@@ -274,11 +275,11 @@ msgstr ""
 
 #: netstuff.c:134
 msgid "IP address:"
-msgstr ""
+msgstr "IP-адрес:"
 
 #: netstuff.c:146
 msgid "Network mask:"
-msgstr ""
+msgstr "Сетевая маска:"
 
 #: netstuff.c:173 networking.c:749
 msgid "The following fields are invalid:"
@@ -286,15 +287,15 @@ msgstr ""
 
 #: netstuff.c:183
 msgid "IP address"
-msgstr ""
+msgstr "IP-адрес"
 
 #: netstuff.c:189
 msgid "Network mask"
-msgstr ""
+msgstr "Сетевая маска"
 
 #: netstuff.c:198
 msgid "DHCP hostname"
-msgstr ""
+msgstr "Имя хоста DHCP"
 
 #: netstuff.c:396 netstuff.c:709
 msgid "Unset"
@@ -307,11 +308,11 @@ msgstr ""
 
 #: netstuff.c:672
 msgid "Extended Network Menu"
-msgstr ""
+msgstr "Расширенное сетевое меню"
 
 #: netstuff.c:673 networking.c:520
 msgid "Select"
-msgstr ""
+msgstr "Выберите"
 
 #: netstuff.c:673
 msgid "Identify"
@@ -340,7 +341,7 @@ msgstr ""
 
 #: netstuff.c:755
 msgid "Select network driver"
-msgstr ""
+msgstr "Выберите сетевой драйвер"
 
 #: netstuff.c:755
 msgid "Set additional module parameters"
@@ -348,11 +349,11 @@ msgstr ""
 
 #: netstuff.c:762
 msgid "Loading module..."
-msgstr ""
+msgstr "Модуль загружается..."
 
 #: netstuff.c:777
 msgid "Unable to load driver module."
-msgstr ""
+msgstr "Невозможно загрузить драйвер модуля."
 
 #: netstuff.c:780
 msgid "Module name cannot be blank."
@@ -360,11 +361,11 @@ msgstr ""
 
 #: networking.c:110
 msgid "Stopping network..."
-msgstr ""
+msgstr "Остановка сети.."
 
 #: networking.c:115
 msgid "Restarting network..."
-msgstr ""
+msgstr "Перезапуск сети..."
 
 #: networking.c:146
 msgid "No GREEN interface assigned."
@@ -408,11 +409,11 @@ msgstr ""
 
 #: networking.c:217
 msgid "Misssing DNS."
-msgstr ""
+msgstr "Отсутствует DNS."
 
 #: networking.c:224
 msgid "Missing Default Gateway."
-msgstr ""
+msgstr "Отсутствует шлюз по умолчанию."
 
 #: networking.c:237 networking.c:304
 msgid "Network configuration type"
@@ -444,11 +445,11 @@ msgstr ""
 
 #: networking.c:268
 msgid "Network configuration menu"
-msgstr ""
+msgstr "Меню настройки сети"
 
 #: networking.c:269 networking.c:520 networking.c:642
 msgid "Done"
-msgstr ""
+msgstr "Успешно завершено."
 
 #: networking.c:300
 #, c-format
@@ -493,7 +494,7 @@ msgstr ""
 
 #: networking.c:520
 msgid "Remove"
-msgstr ""
+msgstr "Удалить"
 
 #: networking.c:556 networking.c:649
 #, c-format
@@ -510,7 +511,7 @@ msgstr ""
 
 #: networking.c:729
 msgid "Default gateway:"
-msgstr ""
+msgstr "Шлюз по умолчанию:"
 
 #: networking.c:744
 msgid ""
@@ -520,7 +521,7 @@ msgstr ""
 
 #: networking.c:773
 msgid "Default gateway"
-msgstr ""
+msgstr "Шлюз по умолчанию"
 
 #: networking.c:780
 msgid "Secondary DNS specified without a Primary DNS"
@@ -533,11 +534,11 @@ msgstr ""
 
 #: passwords.c:38 passwords.c:61
 msgid "Setting password"
-msgstr ""
+msgstr "Установка пароля"
 
 #: passwords.c:38
 msgid "Setting 'root' password...."
-msgstr ""
+msgstr "Установка 'root' пароля..."
 
 #: passwords.c:39
 msgid "Problem setting 'root' password."
@@ -562,23 +563,23 @@ msgstr ""
 
 #: passwords.c:76
 msgid "Password:"
-msgstr ""
+msgstr "Пароль:"
 
 #: passwords.c:77
 msgid "Again:"
-msgstr ""
+msgstr "Повторите пароль:"
 
 #: passwords.c:95
 msgid "Password cannot be blank."
-msgstr ""
+msgstr "Пароль не может быть пустым."
 
 #: passwords.c:102
 msgid "Passwords do not match."
-msgstr ""
+msgstr "Пароли не совпадают"
 
 #: passwords.c:109
 msgid "Password cannot contain spaces."
-msgstr ""
+msgstr "Пароль не может содержать пробелы"
 
 #: timezone.c:77
 msgid "Choose the timezone you are in from the list below."

diff --git a/src/setup/po/ru_RU.po b/src/setup/po/ru_RU.po
new file mode 100644 (file)
index 0000000..0a803e0
--- /dev/null
+++ b/src/setup/po/ru_RU.po
@@ -0,0 +1,584 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR The IPFire Project (www.ipfire.org)
+# This file is distributed under the same license as the PACKAGE package.
+# 
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: IPFire Project\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-08-21 15:12+0000\n"
+"PO-Revision-Date: 2014-08-12 10:08+0000\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: Russian (Russia) (http://www.transifex.com/projects/p/ipfire/language/ru_RU/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ru_RU\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#: dhcp.c:50
+msgid "Start address:"
+msgstr ""
+
+#: dhcp.c:51
+msgid "End address:"
+msgstr ""
+
+#: dhcp.c:52 networking.c:717
+msgid "Primary DNS:"
+msgstr ""
+
+#: dhcp.c:53 networking.c:723
+msgid "Secondary DNS:"
+msgstr ""
+
+#: dhcp.c:54
+msgid "Default lease (mins):"
+msgstr ""
+
+#: dhcp.c:55
+msgid "Max lease (mins):"
+msgstr ""
+
+#: dhcp.c:56
+msgid "Domain name suffix:"
+msgstr ""
+
+#: dhcp.c:86 dhcp.c:93 dhcp.c:101 domainname.c:34 hostname.c:37 keymap.c:70
+#: misc.c:40 misc.c:52 netstuff.c:377 netstuff.c:566 netstuff.c:704
+#: networking.c:134 networking.c:255 networking.c:291 networking.c:346
+#: networking.c:442 networking.c:552 networking.c:603 networking.c:610
+#: networking.c:713 timezone.c:63
+msgid "Unable to open settings file"
+msgstr ""
+
+#: dhcp.c:111
+msgid "DHCP server configuration"
+msgstr ""
+
+#: dhcp.c:116
+msgid "Configure the DHCP server by entering the settings information."
+msgstr ""
+
+#: dhcp.c:125
+msgid "Enabled"
+msgstr ""
+
+#: dhcp.c:142 domainname.c:43 hostname.c:47 keymap.c:86 main.c:99 main.c:172
+#: main.c:174 netstuff.c:157 netstuff.c:733 netstuff.c:756 networking.c:163
+#: networking.c:269 networking.c:305 networking.c:409 networking.c:560
+#: networking.c:642 networking.c:653 networking.c:746 passwords.c:89
+#: timezone.c:78
+msgid "OK"
+msgstr ""
+
+#: dhcp.c:143 domainname.c:43 hostname.c:47 keymap.c:86 netstuff.c:158
+#: netstuff.c:673 netstuff.c:733 netstuff.c:756 networking.c:305
+#: networking.c:410 networking.c:560 networking.c:653 networking.c:746
+#: passwords.c:89 timezone.c:78
+msgid "Cancel"
+msgstr ""
+
+#: dhcp.c:156
+msgid ""
+"The following fields are invalid:\n"
+"\n"
+msgstr ""
+
+#: dhcp.c:159
+msgid "Start address"
+msgstr ""
+
+#: dhcp.c:165
+msgid "End address"
+msgstr ""
+
+#: dhcp.c:173 networking.c:755
+msgid "Primary DNS"
+msgstr ""
+
+#: dhcp.c:182 networking.c:764
+msgid "Secondary DNS"
+msgstr ""
+
+#: dhcp.c:189
+msgid "Default lease time"
+msgstr ""
+
+#: dhcp.c:195
+msgid "Max. lease time"
+msgstr ""
+
+#: domainname.c:42 main.c:70
+msgid "Domain name"
+msgstr ""
+
+#: domainname.c:42
+msgid "Enter Domain name"
+msgstr ""
+
+#: domainname.c:48
+msgid "Domain name cannot be empty."
+msgstr ""
+
+#: domainname.c:50
+msgid "Domain name cannot contain spaces."
+msgstr ""
+
+#: domainname.c:53
+msgid "Domain name may only contain letters, numbers, hyphens and periods."
+msgstr ""
+
+#: hostname.c:46 main.c:69
+msgid "Hostname"
+msgstr ""
+
+#: hostname.c:46
+msgid "Enter the machine's hostname."
+msgstr ""
+
+#: hostname.c:53
+msgid "Hostname cannot be empty."
+msgstr ""
+
+#: hostname.c:55
+msgid "Hostname cannot contain spaces."
+msgstr ""
+
+#: hostname.c:58
+msgid "Hostname may only contain letters, numbers and hyphens."
+msgstr ""
+
+#: keymap.c:84 main.c:67
+msgid "Keyboard mapping"
+msgstr ""
+
+#: keymap.c:85
+msgid "Choose the type of keyboard you are using from the list below."
+msgstr ""
+
+#: main.c:68 timezone.c:77
+msgid "Timezone"
+msgstr ""
+
+#: main.c:71 networking.c:110 networking.c:115 networking.c:447
+msgid "Networking"
+msgstr ""
+
+#: main.c:72 misc.c:147
+msgid "ISDN"
+msgstr ""
+
+#: main.c:73
+msgid "'root' password"
+msgstr ""
+
+#: main.c:74
+msgid "'admin' password"
+msgstr ""
+
+#: main.c:90
+msgid "              <Tab>/<Alt-Tab> between elements   |  <Space> selects"
+msgstr ""
+
+#: main.c:97
+msgid "Section menu"
+msgstr ""
+
+#: main.c:98
+msgid "Select the item you wish to configure."
+msgstr ""
+
+#: main.c:99
+msgid "Quit"
+msgstr ""
+
+#: main.c:172
+msgid "Setup is complete."
+msgstr ""
+
+#: main.c:174 netstuff.c:733 networking.c:560 networking.c:653
+msgid "Warning"
+msgstr ""
+
+#: main.c:175
+msgid ""
+"Initial setup was not entirely complete. You must ensure that Setup is "
+"properly finished by running setup again at the shell."
+msgstr ""
+
+#: misc.c:62
+#, c-format
+msgid "Unable to write %s/main/hostname.conf"
+msgstr ""
+
+#: misc.c:71
+msgid "Unable to open main hosts file."
+msgstr ""
+
+#: misc.c:76
+msgid "Unable to write /etc/hosts."
+msgstr ""
+
+#: misc.c:117
+msgid "Unable to write /etc/hosts.deny."
+msgstr ""
+
+#: misc.c:125
+msgid "Unable to write /etc/hosts.allow."
+msgstr ""
+
+#: misc.c:136
+msgid "Unable to set hostname."
+msgstr ""
+
+#: misc.c:147
+msgid "Scanning and configuring ISDN devices."
+msgstr ""
+
+#: misc.c:148
+msgid "Unable to scan for ISDN devices."
+msgstr ""
+
+#: netstuff.c:86
+#, c-format
+msgid "Interface - %s"
+msgstr ""
+
+#: netstuff.c:91
+#, c-format
+msgid "Enter the IP address information for the %s interface."
+msgstr ""
+
+#: netstuff.c:103
+msgid "Static"
+msgstr ""
+
+#: netstuff.c:104
+msgid "DHCP"
+msgstr ""
+
+#: netstuff.c:105
+msgid "PPP DIALUP (PPPoE, modem, ATM ...)"
+msgstr ""
+
+#: netstuff.c:113
+msgid "DHCP Hostname:"
+msgstr ""
+
+#: netstuff.c:115
+msgid "Force DHCP MTU:"
+msgstr ""
+
+#: netstuff.c:134
+msgid "IP address:"
+msgstr ""
+
+#: netstuff.c:146
+msgid "Network mask:"
+msgstr ""
+
+#: netstuff.c:173 networking.c:749
+msgid "The following fields are invalid:"
+msgstr ""
+
+#: netstuff.c:183
+msgid "IP address"
+msgstr ""
+
+#: netstuff.c:189
+msgid "Network mask"
+msgstr ""
+
+#: netstuff.c:198
+msgid "DHCP hostname"
+msgstr ""
+
+#: netstuff.c:396 netstuff.c:709
+msgid "Unset"
+msgstr ""
+
+#: netstuff.c:669
+#, c-format
+msgid "Please choose a networkcard for the following interface - %s."
+msgstr ""
+
+#: netstuff.c:672
+msgid "Extended Network Menu"
+msgstr ""
+
+#: netstuff.c:673 networking.c:520
+msgid "Select"
+msgstr ""
+
+#: netstuff.c:673
+msgid "Identify"
+msgstr ""
+
+#: netstuff.c:678
+msgid "Device Identification"
+msgstr ""
+
+#: netstuff.c:678
+msgid "The lights on the selected port should flash now for 10 seconds..."
+msgstr ""
+
+#: netstuff.c:679
+msgid "Identification is not supported by this interface."
+msgstr ""
+
+#: netstuff.c:691
+msgid "There are no unassigned interfaces on your system."
+msgstr ""
+
+#: netstuff.c:732
+#, c-format
+msgid "Do you really want to remove the assigned %s interface?"
+msgstr ""
+
+#: netstuff.c:755
+msgid "Select network driver"
+msgstr ""
+
+#: netstuff.c:755
+msgid "Set additional module parameters"
+msgstr ""
+
+#: netstuff.c:762
+msgid "Loading module..."
+msgstr ""
+
+#: netstuff.c:777
+msgid "Unable to load driver module."
+msgstr ""
+
+#: netstuff.c:780
+msgid "Module name cannot be blank."
+msgstr ""
+
+#: networking.c:110
+msgid "Stopping network..."
+msgstr ""
+
+#: networking.c:115
+msgid "Restarting network..."
+msgstr ""
+
+#: networking.c:146
+msgid "No GREEN interface assigned."
+msgstr ""
+
+#: networking.c:152
+msgid "Missing an IP address on GREEN."
+msgstr ""
+
+#: networking.c:163
+msgid "Error"
+msgstr ""
+
+#: networking.c:163
+msgid "Ignore"
+msgstr ""
+
+#: networking.c:164
+msgid "No RED interface assigned."
+msgstr ""
+
+#: networking.c:173
+msgid "Missing an IP address on RED."
+msgstr ""
+
+#: networking.c:183
+msgid "No ORANGE interface assigned."
+msgstr ""
+
+#: networking.c:189
+msgid "Missing an IP address on ORANGE."
+msgstr ""
+
+#: networking.c:199
+msgid "No BLUE interface assigned."
+msgstr ""
+
+#: networking.c:205
+msgid "Missing an IP address on BLUE."
+msgstr ""
+
+#: networking.c:217
+msgid "Misssing DNS."
+msgstr ""
+
+#: networking.c:224
+msgid "Missing Default Gateway."
+msgstr ""
+
+#: networking.c:237 networking.c:304
+msgid "Network configuration type"
+msgstr ""
+
+#: networking.c:238 networking.c:409
+msgid "Drivers and card assignments"
+msgstr ""
+
+#: networking.c:239 networking.c:640
+msgid "Address settings"
+msgstr ""
+
+#: networking.c:240 networking.c:743
+msgid "DNS and Gateway settings"
+msgstr ""
+
+#: networking.c:260
+msgid "When configuration is complete, a network restart will be required."
+msgstr ""
+
+#: networking.c:267
+#, c-format
+msgid ""
+"Current config: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: networking.c:268
+msgid "Network configuration menu"
+msgstr ""
+
+#: networking.c:269 networking.c:520 networking.c:642
+msgid "Done"
+msgstr ""
+
+#: networking.c:300
+#, c-format
+msgid ""
+"Select the network configuration for %s. The following configuration types "
+"list those interfaces which have ethernet attached. If you change this "
+"setting, a network restart will be required, and you will have to "
+"reconfigure the network driver assignments."
+msgstr ""
+
+#: networking.c:307
+#, c-format
+msgid ""
+"Not enough netcards for your choice.\n"
+"\n"
+"Needed: %d - Available: %d\n"
+msgstr ""
+
+#: networking.c:359
+msgid ""
+"Configure network drivers, and which interface each card is assigned to. The current configuration is as follows:\n"
+"\n"
+msgstr ""
+
+#: networking.c:408
+msgid "Do you wish to change these settings?"
+msgstr ""
+
+#: networking.c:447
+msgid "Restarting non-local network..."
+msgstr ""
+
+#: networking.c:464
+msgid ""
+"Please choose the interface you wish to change.\n"
+"\n"
+msgstr ""
+
+#: networking.c:519
+msgid "Assigned Cards"
+msgstr ""
+
+#: networking.c:520
+msgid "Remove"
+msgstr ""
+
+#: networking.c:556 networking.c:649
+#, c-format
+msgid ""
+"If you change this IP address, and you are logged in remotely, your "
+"connection to the %s machine will be broken, and you will have to reconnect "
+"on the new IP. This is a risky operation, and should only be attempted if "
+"you have physical access to the machine, should something go wrong."
+msgstr ""
+
+#: networking.c:641
+msgid "Select the interface you wish to reconfigure."
+msgstr ""
+
+#: networking.c:729
+msgid "Default gateway:"
+msgstr ""
+
+#: networking.c:744
+msgid ""
+"Enter the DNS and gateway information. These settings are used only with "
+"Static IP (and DHCP if DNS set) on the RED interface."
+msgstr ""
+
+#: networking.c:773
+msgid "Default gateway"
+msgstr ""
+
+#: networking.c:780
+msgid "Secondary DNS specified without a Primary DNS"
+msgstr ""
+
+#: passwords.c:33
+msgid ""
+"Enter the 'root' user password. Login as this user for commandline access."
+msgstr ""
+
+#: passwords.c:38 passwords.c:61
+msgid "Setting password"
+msgstr ""
+
+#: passwords.c:38
+msgid "Setting 'root' password...."
+msgstr ""
+
+#: passwords.c:39
+msgid "Problem setting 'root' password."
+msgstr ""
+
+#: passwords.c:53
+#, c-format
+msgid ""
+"Enter %s 'admin' user password. This is the user to use for logging into the"
+" %s web administration pages."
+msgstr ""
+
+#: passwords.c:60
+#, c-format
+msgid "Setting %s 'admin' user password..."
+msgstr ""
+
+#: passwords.c:62
+#, c-format
+msgid "Problem setting %s 'admin' user password."
+msgstr ""
+
+#: passwords.c:76
+msgid "Password:"
+msgstr ""
+
+#: passwords.c:77
+msgid "Again:"
+msgstr ""
+
+#: passwords.c:95
+msgid "Password cannot be blank."
+msgstr ""
+
+#: passwords.c:102
+msgid "Passwords do not match."
+msgstr ""
+
+#: passwords.c:109
+msgid "Password cannot contain spaces."
+msgstr ""
+
+#: timezone.c:77
+msgid "Choose the timezone you are in from the list below."
+msgstr ""

diff --git a/src/setup/po/rw.po b/src/setup/po/rw.po
new file mode 100644 (file)
index 0000000..0bd98ee
--- /dev/null
+++ b/src/setup/po/rw.po
@@ -0,0 +1,584 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR The IPFire Project (www.ipfire.org)
+# This file is distributed under the same license as the PACKAGE package.
+# 
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: IPFire Project\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-08-21 15:12+0000\n"
+"PO-Revision-Date: 2014-08-12 10:08+0000\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: Kinyarwanda (http://www.transifex.com/projects/p/ipfire/language/rw/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: rw\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: dhcp.c:50
+msgid "Start address:"
+msgstr ""
+
+#: dhcp.c:51
+msgid "End address:"
+msgstr ""
+
+#: dhcp.c:52 networking.c:717
+msgid "Primary DNS:"
+msgstr ""
+
+#: dhcp.c:53 networking.c:723
+msgid "Secondary DNS:"
+msgstr ""
+
+#: dhcp.c:54
+msgid "Default lease (mins):"
+msgstr ""
+
+#: dhcp.c:55
+msgid "Max lease (mins):"
+msgstr ""
+
+#: dhcp.c:56
+msgid "Domain name suffix:"
+msgstr ""
+
+#: dhcp.c:86 dhcp.c:93 dhcp.c:101 domainname.c:34 hostname.c:37 keymap.c:70
+#: misc.c:40 misc.c:52 netstuff.c:377 netstuff.c:566 netstuff.c:704
+#: networking.c:134 networking.c:255 networking.c:291 networking.c:346
+#: networking.c:442 networking.c:552 networking.c:603 networking.c:610
+#: networking.c:713 timezone.c:63
+msgid "Unable to open settings file"
+msgstr ""
+
+#: dhcp.c:111
+msgid "DHCP server configuration"
+msgstr ""
+
+#: dhcp.c:116
+msgid "Configure the DHCP server by entering the settings information."
+msgstr ""
+
+#: dhcp.c:125
+msgid "Enabled"
+msgstr ""
+
+#: dhcp.c:142 domainname.c:43 hostname.c:47 keymap.c:86 main.c:99 main.c:172
+#: main.c:174 netstuff.c:157 netstuff.c:733 netstuff.c:756 networking.c:163
+#: networking.c:269 networking.c:305 networking.c:409 networking.c:560
+#: networking.c:642 networking.c:653 networking.c:746 passwords.c:89
+#: timezone.c:78
+msgid "OK"
+msgstr ""
+
+#: dhcp.c:143 domainname.c:43 hostname.c:47 keymap.c:86 netstuff.c:158
+#: netstuff.c:673 netstuff.c:733 netstuff.c:756 networking.c:305
+#: networking.c:410 networking.c:560 networking.c:653 networking.c:746
+#: passwords.c:89 timezone.c:78
+msgid "Cancel"
+msgstr ""
+
+#: dhcp.c:156
+msgid ""
+"The following fields are invalid:\n"
+"\n"
+msgstr ""
+
+#: dhcp.c:159
+msgid "Start address"
+msgstr ""
+
+#: dhcp.c:165
+msgid "End address"
+msgstr ""
+
+#: dhcp.c:173 networking.c:755
+msgid "Primary DNS"
+msgstr ""
+
+#: dhcp.c:182 networking.c:764
+msgid "Secondary DNS"
+msgstr ""
+
+#: dhcp.c:189
+msgid "Default lease time"
+msgstr ""
+
+#: dhcp.c:195
+msgid "Max. lease time"
+msgstr ""
+
+#: domainname.c:42 main.c:70
+msgid "Domain name"
+msgstr ""
+
+#: domainname.c:42
+msgid "Enter Domain name"
+msgstr ""
+
+#: domainname.c:48
+msgid "Domain name cannot be empty."
+msgstr ""
+
+#: domainname.c:50
+msgid "Domain name cannot contain spaces."
+msgstr ""
+
+#: domainname.c:53
+msgid "Domain name may only contain letters, numbers, hyphens and periods."
+msgstr ""
+
+#: hostname.c:46 main.c:69
+msgid "Hostname"
+msgstr ""
+
+#: hostname.c:46
+msgid "Enter the machine's hostname."
+msgstr ""
+
+#: hostname.c:53
+msgid "Hostname cannot be empty."
+msgstr ""
+
+#: hostname.c:55
+msgid "Hostname cannot contain spaces."
+msgstr ""
+
+#: hostname.c:58
+msgid "Hostname may only contain letters, numbers and hyphens."
+msgstr ""
+
+#: keymap.c:84 main.c:67
+msgid "Keyboard mapping"
+msgstr ""
+
+#: keymap.c:85
+msgid "Choose the type of keyboard you are using from the list below."
+msgstr ""
+
+#: main.c:68 timezone.c:77
+msgid "Timezone"
+msgstr ""
+
+#: main.c:71 networking.c:110 networking.c:115 networking.c:447
+msgid "Networking"
+msgstr ""
+
+#: main.c:72 misc.c:147
+msgid "ISDN"
+msgstr ""
+
+#: main.c:73
+msgid "'root' password"
+msgstr ""
+
+#: main.c:74
+msgid "'admin' password"
+msgstr ""
+
+#: main.c:90
+msgid "              <Tab>/<Alt-Tab> between elements   |  <Space> selects"
+msgstr ""
+
+#: main.c:97
+msgid "Section menu"
+msgstr ""
+
+#: main.c:98
+msgid "Select the item you wish to configure."
+msgstr ""
+
+#: main.c:99
+msgid "Quit"
+msgstr ""
+
+#: main.c:172
+msgid "Setup is complete."
+msgstr ""
+
+#: main.c:174 netstuff.c:733 networking.c:560 networking.c:653
+msgid "Warning"
+msgstr ""
+
+#: main.c:175
+msgid ""
+"Initial setup was not entirely complete. You must ensure that Setup is "
+"properly finished by running setup again at the shell."
+msgstr ""
+
+#: misc.c:62
+#, c-format
+msgid "Unable to write %s/main/hostname.conf"
+msgstr ""
+
+#: misc.c:71
+msgid "Unable to open main hosts file."
+msgstr ""
+
+#: misc.c:76
+msgid "Unable to write /etc/hosts."
+msgstr ""
+
+#: misc.c:117
+msgid "Unable to write /etc/hosts.deny."
+msgstr ""
+
+#: misc.c:125
+msgid "Unable to write /etc/hosts.allow."
+msgstr ""
+
+#: misc.c:136
+msgid "Unable to set hostname."
+msgstr ""
+
+#: misc.c:147
+msgid "Scanning and configuring ISDN devices."
+msgstr ""
+
+#: misc.c:148
+msgid "Unable to scan for ISDN devices."
+msgstr ""
+
+#: netstuff.c:86
+#, c-format
+msgid "Interface - %s"
+msgstr ""
+
+#: netstuff.c:91
+#, c-format
+msgid "Enter the IP address information for the %s interface."
+msgstr ""
+
+#: netstuff.c:103
+msgid "Static"
+msgstr ""
+
+#: netstuff.c:104
+msgid "DHCP"
+msgstr ""
+
+#: netstuff.c:105
+msgid "PPP DIALUP (PPPoE, modem, ATM ...)"
+msgstr ""
+
+#: netstuff.c:113
+msgid "DHCP Hostname:"
+msgstr ""
+
+#: netstuff.c:115
+msgid "Force DHCP MTU:"
+msgstr ""
+
+#: netstuff.c:134
+msgid "IP address:"
+msgstr ""
+
+#: netstuff.c:146
+msgid "Network mask:"
+msgstr ""
+
+#: netstuff.c:173 networking.c:749
+msgid "The following fields are invalid:"
+msgstr ""
+
+#: netstuff.c:183
+msgid "IP address"
+msgstr ""
+
+#: netstuff.c:189
+msgid "Network mask"
+msgstr ""
+
+#: netstuff.c:198
+msgid "DHCP hostname"
+msgstr ""
+
+#: netstuff.c:396 netstuff.c:709
+msgid "Unset"
+msgstr ""
+
+#: netstuff.c:669
+#, c-format
+msgid "Please choose a networkcard for the following interface - %s."
+msgstr ""
+
+#: netstuff.c:672
+msgid "Extended Network Menu"
+msgstr ""
+
+#: netstuff.c:673 networking.c:520
+msgid "Select"
+msgstr ""
+
+#: netstuff.c:673
+msgid "Identify"
+msgstr ""
+
+#: netstuff.c:678
+msgid "Device Identification"
+msgstr ""
+
+#: netstuff.c:678
+msgid "The lights on the selected port should flash now for 10 seconds..."
+msgstr ""
+
+#: netstuff.c:679
+msgid "Identification is not supported by this interface."
+msgstr ""
+
+#: netstuff.c:691
+msgid "There are no unassigned interfaces on your system."
+msgstr ""
+
+#: netstuff.c:732
+#, c-format
+msgid "Do you really want to remove the assigned %s interface?"
+msgstr ""
+
+#: netstuff.c:755
+msgid "Select network driver"
+msgstr ""
+
+#: netstuff.c:755
+msgid "Set additional module parameters"
+msgstr ""
+
+#: netstuff.c:762
+msgid "Loading module..."
+msgstr ""
+
+#: netstuff.c:777
+msgid "Unable to load driver module."
+msgstr ""
+
+#: netstuff.c:780
+msgid "Module name cannot be blank."
+msgstr ""
+
+#: networking.c:110
+msgid "Stopping network..."
+msgstr ""
+
+#: networking.c:115
+msgid "Restarting network..."
+msgstr ""
+
+#: networking.c:146
+msgid "No GREEN interface assigned."
+msgstr ""
+
+#: networking.c:152
+msgid "Missing an IP address on GREEN."
+msgstr ""
+
+#: networking.c:163
+msgid "Error"
+msgstr ""
+
+#: networking.c:163
+msgid "Ignore"
+msgstr ""
+
+#: networking.c:164
+msgid "No RED interface assigned."
+msgstr ""
+
+#: networking.c:173
+msgid "Missing an IP address on RED."
+msgstr ""
+
+#: networking.c:183
+msgid "No ORANGE interface assigned."
+msgstr ""
+
+#: networking.c:189
+msgid "Missing an IP address on ORANGE."
+msgstr ""
+
+#: networking.c:199
+msgid "No BLUE interface assigned."
+msgstr ""
+
+#: networking.c:205
+msgid "Missing an IP address on BLUE."
+msgstr ""
+
+#: networking.c:217
+msgid "Misssing DNS."
+msgstr ""
+
+#: networking.c:224
+msgid "Missing Default Gateway."
+msgstr ""
+
+#: networking.c:237 networking.c:304
+msgid "Network configuration type"
+msgstr ""
+
+#: networking.c:238 networking.c:409
+msgid "Drivers and card assignments"
+msgstr ""
+
+#: networking.c:239 networking.c:640
+msgid "Address settings"
+msgstr ""
+
+#: networking.c:240 networking.c:743
+msgid "DNS and Gateway settings"
+msgstr ""
+
+#: networking.c:260
+msgid "When configuration is complete, a network restart will be required."
+msgstr ""
+
+#: networking.c:267
+#, c-format
+msgid ""
+"Current config: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: networking.c:268
+msgid "Network configuration menu"
+msgstr ""
+
+#: networking.c:269 networking.c:520 networking.c:642
+msgid "Done"
+msgstr ""
+
+#: networking.c:300
+#, c-format
+msgid ""
+"Select the network configuration for %s. The following configuration types "
+"list those interfaces which have ethernet attached. If you change this "
+"setting, a network restart will be required, and you will have to "
+"reconfigure the network driver assignments."
+msgstr ""
+
+#: networking.c:307
+#, c-format
+msgid ""
+"Not enough netcards for your choice.\n"
+"\n"
+"Needed: %d - Available: %d\n"
+msgstr ""
+
+#: networking.c:359
+msgid ""
+"Configure network drivers, and which interface each card is assigned to. The current configuration is as follows:\n"
+"\n"
+msgstr ""
+
+#: networking.c:408
+msgid "Do you wish to change these settings?"
+msgstr ""
+
+#: networking.c:447
+msgid "Restarting non-local network..."
+msgstr ""
+
+#: networking.c:464
+msgid ""
+"Please choose the interface you wish to change.\n"
+"\n"
+msgstr ""
+
+#: networking.c:519
+msgid "Assigned Cards"
+msgstr ""
+
+#: networking.c:520
+msgid "Remove"
+msgstr ""
+
+#: networking.c:556 networking.c:649
+#, c-format
+msgid ""
+"If you change this IP address, and you are logged in remotely, your "
+"connection to the %s machine will be broken, and you will have to reconnect "
+"on the new IP. This is a risky operation, and should only be attempted if "
+"you have physical access to the machine, should something go wrong."
+msgstr ""
+
+#: networking.c:641
+msgid "Select the interface you wish to reconfigure."
+msgstr ""
+
+#: networking.c:729
+msgid "Default gateway:"
+msgstr ""
+
+#: networking.c:744
+msgid ""
+"Enter the DNS and gateway information. These settings are used only with "
+"Static IP (and DHCP if DNS set) on the RED interface."
+msgstr ""
+
+#: networking.c:773
+msgid "Default gateway"
+msgstr ""
+
+#: networking.c:780
+msgid "Secondary DNS specified without a Primary DNS"
+msgstr ""
+
+#: passwords.c:33
+msgid ""
+"Enter the 'root' user password. Login as this user for commandline access."
+msgstr ""
+
+#: passwords.c:38 passwords.c:61
+msgid "Setting password"
+msgstr ""
+
+#: passwords.c:38
+msgid "Setting 'root' password...."
+msgstr ""
+
+#: passwords.c:39
+msgid "Problem setting 'root' password."
+msgstr ""
+
+#: passwords.c:53
+#, c-format
+msgid ""
+"Enter %s 'admin' user password. This is the user to use for logging into the"
+" %s web administration pages."
+msgstr ""
+
+#: passwords.c:60
+#, c-format
+msgid "Setting %s 'admin' user password..."
+msgstr ""
+
+#: passwords.c:62
+#, c-format
+msgid "Problem setting %s 'admin' user password."
+msgstr ""
+
+#: passwords.c:76
+msgid "Password:"
+msgstr ""
+
+#: passwords.c:77
+msgid "Again:"
+msgstr ""
+
+#: passwords.c:95
+msgid "Password cannot be blank."
+msgstr ""
+
+#: passwords.c:102
+msgid "Passwords do not match."
+msgstr ""
+
+#: passwords.c:109
+msgid "Password cannot contain spaces."
+msgstr ""
+
+#: timezone.c:77
+msgid "Choose the timezone you are in from the list below."
+msgstr ""

diff --git a/src/setup/po/sr.po b/src/setup/po/sr.po
new file mode 100644 (file)
index 0000000..7c71314
--- /dev/null
+++ b/src/setup/po/sr.po
@@ -0,0 +1,584 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR The IPFire Project (www.ipfire.org)
+# This file is distributed under the same license as the PACKAGE package.
+# 
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: IPFire Project\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-08-21 15:12+0000\n"
+"PO-Revision-Date: 2014-08-12 10:08+0000\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: Serbian (http://www.transifex.com/projects/p/ipfire/language/sr/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: sr\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#: dhcp.c:50
+msgid "Start address:"
+msgstr ""
+
+#: dhcp.c:51
+msgid "End address:"
+msgstr ""
+
+#: dhcp.c:52 networking.c:717
+msgid "Primary DNS:"
+msgstr ""
+
+#: dhcp.c:53 networking.c:723
+msgid "Secondary DNS:"
+msgstr ""
+
+#: dhcp.c:54
+msgid "Default lease (mins):"
+msgstr ""
+
+#: dhcp.c:55
+msgid "Max lease (mins):"
+msgstr ""
+
+#: dhcp.c:56
+msgid "Domain name suffix:"
+msgstr ""
+
+#: dhcp.c:86 dhcp.c:93 dhcp.c:101 domainname.c:34 hostname.c:37 keymap.c:70
+#: misc.c:40 misc.c:52 netstuff.c:377 netstuff.c:566 netstuff.c:704
+#: networking.c:134 networking.c:255 networking.c:291 networking.c:346
+#: networking.c:442 networking.c:552 networking.c:603 networking.c:610
+#: networking.c:713 timezone.c:63
+msgid "Unable to open settings file"
+msgstr ""
+
+#: dhcp.c:111
+msgid "DHCP server configuration"
+msgstr ""
+
+#: dhcp.c:116
+msgid "Configure the DHCP server by entering the settings information."
+msgstr ""
+
+#: dhcp.c:125
+msgid "Enabled"
+msgstr ""
+
+#: dhcp.c:142 domainname.c:43 hostname.c:47 keymap.c:86 main.c:99 main.c:172
+#: main.c:174 netstuff.c:157 netstuff.c:733 netstuff.c:756 networking.c:163
+#: networking.c:269 networking.c:305 networking.c:409 networking.c:560
+#: networking.c:642 networking.c:653 networking.c:746 passwords.c:89
+#: timezone.c:78
+msgid "OK"
+msgstr ""
+
+#: dhcp.c:143 domainname.c:43 hostname.c:47 keymap.c:86 netstuff.c:158
+#: netstuff.c:673 netstuff.c:733 netstuff.c:756 networking.c:305
+#: networking.c:410 networking.c:560 networking.c:653 networking.c:746
+#: passwords.c:89 timezone.c:78
+msgid "Cancel"
+msgstr ""
+
+#: dhcp.c:156
+msgid ""
+"The following fields are invalid:\n"
+"\n"
+msgstr ""
+
+#: dhcp.c:159
+msgid "Start address"
+msgstr ""
+
+#: dhcp.c:165
+msgid "End address"
+msgstr ""
+
+#: dhcp.c:173 networking.c:755
+msgid "Primary DNS"
+msgstr ""
+
+#: dhcp.c:182 networking.c:764
+msgid "Secondary DNS"
+msgstr ""
+
+#: dhcp.c:189
+msgid "Default lease time"
+msgstr ""
+
+#: dhcp.c:195
+msgid "Max. lease time"
+msgstr ""
+
+#: domainname.c:42 main.c:70
+msgid "Domain name"
+msgstr ""
+
+#: domainname.c:42
+msgid "Enter Domain name"
+msgstr ""
+
+#: domainname.c:48
+msgid "Domain name cannot be empty."
+msgstr ""
+
+#: domainname.c:50
+msgid "Domain name cannot contain spaces."
+msgstr ""
+
+#: domainname.c:53
+msgid "Domain name may only contain letters, numbers, hyphens and periods."
+msgstr ""
+
+#: hostname.c:46 main.c:69
+msgid "Hostname"
+msgstr ""
+
+#: hostname.c:46
+msgid "Enter the machine's hostname."
+msgstr ""
+
+#: hostname.c:53
+msgid "Hostname cannot be empty."
+msgstr ""
+
+#: hostname.c:55
+msgid "Hostname cannot contain spaces."
+msgstr ""
+
+#: hostname.c:58
+msgid "Hostname may only contain letters, numbers and hyphens."
+msgstr ""
+
+#: keymap.c:84 main.c:67
+msgid "Keyboard mapping"
+msgstr ""
+
+#: keymap.c:85
+msgid "Choose the type of keyboard you are using from the list below."
+msgstr ""
+
+#: main.c:68 timezone.c:77
+msgid "Timezone"
+msgstr ""
+
+#: main.c:71 networking.c:110 networking.c:115 networking.c:447
+msgid "Networking"
+msgstr ""
+
+#: main.c:72 misc.c:147
+msgid "ISDN"
+msgstr ""
+
+#: main.c:73
+msgid "'root' password"
+msgstr ""
+
+#: main.c:74
+msgid "'admin' password"
+msgstr ""
+
+#: main.c:90
+msgid "              <Tab>/<Alt-Tab> between elements   |  <Space> selects"
+msgstr ""
+
+#: main.c:97
+msgid "Section menu"
+msgstr ""
+
+#: main.c:98
+msgid "Select the item you wish to configure."
+msgstr ""
+
+#: main.c:99
+msgid "Quit"
+msgstr ""
+
+#: main.c:172
+msgid "Setup is complete."
+msgstr ""
+
+#: main.c:174 netstuff.c:733 networking.c:560 networking.c:653
+msgid "Warning"
+msgstr ""
+
+#: main.c:175
+msgid ""
+"Initial setup was not entirely complete. You must ensure that Setup is "
+"properly finished by running setup again at the shell."
+msgstr ""
+
+#: misc.c:62
+#, c-format
+msgid "Unable to write %s/main/hostname.conf"
+msgstr ""
+
+#: misc.c:71
+msgid "Unable to open main hosts file."
+msgstr ""
+
+#: misc.c:76
+msgid "Unable to write /etc/hosts."
+msgstr ""
+
+#: misc.c:117
+msgid "Unable to write /etc/hosts.deny."
+msgstr ""
+
+#: misc.c:125
+msgid "Unable to write /etc/hosts.allow."
+msgstr ""
+
+#: misc.c:136
+msgid "Unable to set hostname."
+msgstr ""
+
+#: misc.c:147
+msgid "Scanning and configuring ISDN devices."
+msgstr ""
+
+#: misc.c:148
+msgid "Unable to scan for ISDN devices."
+msgstr ""
+
+#: netstuff.c:86
+#, c-format
+msgid "Interface - %s"
+msgstr ""
+
+#: netstuff.c:91
+#, c-format
+msgid "Enter the IP address information for the %s interface."
+msgstr ""
+
+#: netstuff.c:103
+msgid "Static"
+msgstr ""
+
+#: netstuff.c:104
+msgid "DHCP"
+msgstr ""
+
+#: netstuff.c:105
+msgid "PPP DIALUP (PPPoE, modem, ATM ...)"
+msgstr ""
+
+#: netstuff.c:113
+msgid "DHCP Hostname:"
+msgstr ""
+
+#: netstuff.c:115
+msgid "Force DHCP MTU:"
+msgstr ""
+
+#: netstuff.c:134
+msgid "IP address:"
+msgstr ""
+
+#: netstuff.c:146
+msgid "Network mask:"
+msgstr ""
+
+#: netstuff.c:173 networking.c:749
+msgid "The following fields are invalid:"
+msgstr ""
+
+#: netstuff.c:183
+msgid "IP address"
+msgstr ""
+
+#: netstuff.c:189
+msgid "Network mask"
+msgstr ""
+
+#: netstuff.c:198
+msgid "DHCP hostname"
+msgstr ""
+
+#: netstuff.c:396 netstuff.c:709
+msgid "Unset"
+msgstr ""
+
+#: netstuff.c:669
+#, c-format
+msgid "Please choose a networkcard for the following interface - %s."
+msgstr ""
+
+#: netstuff.c:672
+msgid "Extended Network Menu"
+msgstr ""
+
+#: netstuff.c:673 networking.c:520
+msgid "Select"
+msgstr ""
+
+#: netstuff.c:673
+msgid "Identify"
+msgstr ""
+
+#: netstuff.c:678
+msgid "Device Identification"
+msgstr ""
+
+#: netstuff.c:678
+msgid "The lights on the selected port should flash now for 10 seconds..."
+msgstr ""
+
+#: netstuff.c:679
+msgid "Identification is not supported by this interface."
+msgstr ""
+
+#: netstuff.c:691
+msgid "There are no unassigned interfaces on your system."
+msgstr ""
+
+#: netstuff.c:732
+#, c-format
+msgid "Do you really want to remove the assigned %s interface?"
+msgstr ""
+
+#: netstuff.c:755
+msgid "Select network driver"
+msgstr ""
+
+#: netstuff.c:755
+msgid "Set additional module parameters"
+msgstr ""
+
+#: netstuff.c:762
+msgid "Loading module..."
+msgstr ""
+
+#: netstuff.c:777
+msgid "Unable to load driver module."
+msgstr ""
+
+#: netstuff.c:780
+msgid "Module name cannot be blank."
+msgstr ""
+
+#: networking.c:110
+msgid "Stopping network..."
+msgstr ""
+
+#: networking.c:115
+msgid "Restarting network..."
+msgstr ""
+
+#: networking.c:146
+msgid "No GREEN interface assigned."
+msgstr ""
+
+#: networking.c:152
+msgid "Missing an IP address on GREEN."
+msgstr ""
+
+#: networking.c:163
+msgid "Error"
+msgstr ""
+
+#: networking.c:163
+msgid "Ignore"
+msgstr ""
+
+#: networking.c:164
+msgid "No RED interface assigned."
+msgstr ""
+
+#: networking.c:173
+msgid "Missing an IP address on RED."
+msgstr ""
+
+#: networking.c:183
+msgid "No ORANGE interface assigned."
+msgstr ""
+
+#: networking.c:189
+msgid "Missing an IP address on ORANGE."
+msgstr ""
+
+#: networking.c:199
+msgid "No BLUE interface assigned."
+msgstr ""
+
+#: networking.c:205
+msgid "Missing an IP address on BLUE."
+msgstr ""
+
+#: networking.c:217
+msgid "Misssing DNS."
+msgstr ""
+
+#: networking.c:224
+msgid "Missing Default Gateway."
+msgstr ""
+
+#: networking.c:237 networking.c:304
+msgid "Network configuration type"
+msgstr ""
+
+#: networking.c:238 networking.c:409
+msgid "Drivers and card assignments"
+msgstr ""
+
+#: networking.c:239 networking.c:640
+msgid "Address settings"
+msgstr ""
+
+#: networking.c:240 networking.c:743
+msgid "DNS and Gateway settings"
+msgstr ""
+
+#: networking.c:260
+msgid "When configuration is complete, a network restart will be required."
+msgstr ""
+
+#: networking.c:267
+#, c-format
+msgid ""
+"Current config: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: networking.c:268
+msgid "Network configuration menu"
+msgstr ""
+
+#: networking.c:269 networking.c:520 networking.c:642
+msgid "Done"
+msgstr ""
+
+#: networking.c:300
+#, c-format
+msgid ""
+"Select the network configuration for %s. The following configuration types "
+"list those interfaces which have ethernet attached. If you change this "
+"setting, a network restart will be required, and you will have to "
+"reconfigure the network driver assignments."
+msgstr ""
+
+#: networking.c:307
+#, c-format
+msgid ""
+"Not enough netcards for your choice.\n"
+"\n"
+"Needed: %d - Available: %d\n"
+msgstr ""
+
+#: networking.c:359
+msgid ""
+"Configure network drivers, and which interface each card is assigned to. The current configuration is as follows:\n"
+"\n"
+msgstr ""
+
+#: networking.c:408
+msgid "Do you wish to change these settings?"
+msgstr ""
+
+#: networking.c:447
+msgid "Restarting non-local network..."
+msgstr ""
+
+#: networking.c:464
+msgid ""
+"Please choose the interface you wish to change.\n"
+"\n"
+msgstr ""
+
+#: networking.c:519
+msgid "Assigned Cards"
+msgstr ""
+
+#: networking.c:520
+msgid "Remove"
+msgstr ""
+
+#: networking.c:556 networking.c:649
+#, c-format
+msgid ""
+"If you change this IP address, and you are logged in remotely, your "
+"connection to the %s machine will be broken, and you will have to reconnect "
+"on the new IP. This is a risky operation, and should only be attempted if "
+"you have physical access to the machine, should something go wrong."
+msgstr ""
+
+#: networking.c:641
+msgid "Select the interface you wish to reconfigure."
+msgstr ""
+
+#: networking.c:729
+msgid "Default gateway:"
+msgstr ""
+
+#: networking.c:744
+msgid ""
+"Enter the DNS and gateway information. These settings are used only with "
+"Static IP (and DHCP if DNS set) on the RED interface."
+msgstr ""
+
+#: networking.c:773
+msgid "Default gateway"
+msgstr ""
+
+#: networking.c:780
+msgid "Secondary DNS specified without a Primary DNS"
+msgstr ""
+
+#: passwords.c:33
+msgid ""
+"Enter the 'root' user password. Login as this user for commandline access."
+msgstr ""
+
+#: passwords.c:38 passwords.c:61
+msgid "Setting password"
+msgstr ""
+
+#: passwords.c:38
+msgid "Setting 'root' password...."
+msgstr ""
+
+#: passwords.c:39
+msgid "Problem setting 'root' password."
+msgstr ""
+
+#: passwords.c:53
+#, c-format
+msgid ""
+"Enter %s 'admin' user password. This is the user to use for logging into the"
+" %s web administration pages."
+msgstr ""
+
+#: passwords.c:60
+#, c-format
+msgid "Setting %s 'admin' user password..."
+msgstr ""
+
+#: passwords.c:62
+#, c-format
+msgid "Problem setting %s 'admin' user password."
+msgstr ""
+
+#: passwords.c:76
+msgid "Password:"
+msgstr ""
+
+#: passwords.c:77
+msgid "Again:"
+msgstr ""
+
+#: passwords.c:95
+msgid "Password cannot be blank."
+msgstr ""
+
+#: passwords.c:102
+msgid "Passwords do not match."
+msgstr ""
+
+#: passwords.c:109
+msgid "Password cannot contain spaces."
+msgstr ""
+
+#: timezone.c:77
+msgid "Choose the timezone you are in from the list below."
+msgstr ""

diff --git a/src/setup/po/su.po b/src/setup/po/su.po
new file mode 100644 (file)
index 0000000..1cab064
--- /dev/null
+++ b/src/setup/po/su.po
@@ -0,0 +1,584 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR The IPFire Project (www.ipfire.org)
+# This file is distributed under the same license as the PACKAGE package.
+# 
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: IPFire Project\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-08-21 15:12+0000\n"
+"PO-Revision-Date: 2014-08-12 10:08+0000\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: Sundanese (http://www.transifex.com/projects/p/ipfire/language/su/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: su\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: dhcp.c:50
+msgid "Start address:"
+msgstr ""
+
+#: dhcp.c:51
+msgid "End address:"
+msgstr ""
+
+#: dhcp.c:52 networking.c:717
+msgid "Primary DNS:"
+msgstr ""
+
+#: dhcp.c:53 networking.c:723
+msgid "Secondary DNS:"
+msgstr ""
+
+#: dhcp.c:54
+msgid "Default lease (mins):"
+msgstr ""
+
+#: dhcp.c:55
+msgid "Max lease (mins):"
+msgstr ""
+
+#: dhcp.c:56
+msgid "Domain name suffix:"
+msgstr ""
+
+#: dhcp.c:86 dhcp.c:93 dhcp.c:101 domainname.c:34 hostname.c:37 keymap.c:70
+#: misc.c:40 misc.c:52 netstuff.c:377 netstuff.c:566 netstuff.c:704
+#: networking.c:134 networking.c:255 networking.c:291 networking.c:346
+#: networking.c:442 networking.c:552 networking.c:603 networking.c:610
+#: networking.c:713 timezone.c:63
+msgid "Unable to open settings file"
+msgstr ""
+
+#: dhcp.c:111
+msgid "DHCP server configuration"
+msgstr ""
+
+#: dhcp.c:116
+msgid "Configure the DHCP server by entering the settings information."
+msgstr ""
+
+#: dhcp.c:125
+msgid "Enabled"
+msgstr ""
+
+#: dhcp.c:142 domainname.c:43 hostname.c:47 keymap.c:86 main.c:99 main.c:172
+#: main.c:174 netstuff.c:157 netstuff.c:733 netstuff.c:756 networking.c:163
+#: networking.c:269 networking.c:305 networking.c:409 networking.c:560
+#: networking.c:642 networking.c:653 networking.c:746 passwords.c:89
+#: timezone.c:78
+msgid "OK"
+msgstr ""
+
+#: dhcp.c:143 domainname.c:43 hostname.c:47 keymap.c:86 netstuff.c:158
+#: netstuff.c:673 netstuff.c:733 netstuff.c:756 networking.c:305
+#: networking.c:410 networking.c:560 networking.c:653 networking.c:746
+#: passwords.c:89 timezone.c:78
+msgid "Cancel"
+msgstr ""
+
+#: dhcp.c:156
+msgid ""
+"The following fields are invalid:\n"
+"\n"
+msgstr ""
+
+#: dhcp.c:159
+msgid "Start address"
+msgstr ""
+
+#: dhcp.c:165
+msgid "End address"
+msgstr ""
+
+#: dhcp.c:173 networking.c:755
+msgid "Primary DNS"
+msgstr ""
+
+#: dhcp.c:182 networking.c:764
+msgid "Secondary DNS"
+msgstr ""
+
+#: dhcp.c:189
+msgid "Default lease time"
+msgstr ""
+
+#: dhcp.c:195
+msgid "Max. lease time"
+msgstr ""
+
+#: domainname.c:42 main.c:70
+msgid "Domain name"
+msgstr ""
+
+#: domainname.c:42
+msgid "Enter Domain name"
+msgstr ""
+
+#: domainname.c:48
+msgid "Domain name cannot be empty."
+msgstr ""
+
+#: domainname.c:50
+msgid "Domain name cannot contain spaces."
+msgstr ""
+
+#: domainname.c:53
+msgid "Domain name may only contain letters, numbers, hyphens and periods."
+msgstr ""
+
+#: hostname.c:46 main.c:69
+msgid "Hostname"
+msgstr ""
+
+#: hostname.c:46
+msgid "Enter the machine's hostname."
+msgstr ""
+
+#: hostname.c:53
+msgid "Hostname cannot be empty."
+msgstr ""
+
+#: hostname.c:55
+msgid "Hostname cannot contain spaces."
+msgstr ""
+
+#: hostname.c:58
+msgid "Hostname may only contain letters, numbers and hyphens."
+msgstr ""
+
+#: keymap.c:84 main.c:67
+msgid "Keyboard mapping"
+msgstr ""
+
+#: keymap.c:85
+msgid "Choose the type of keyboard you are using from the list below."
+msgstr ""
+
+#: main.c:68 timezone.c:77
+msgid "Timezone"
+msgstr ""
+
+#: main.c:71 networking.c:110 networking.c:115 networking.c:447
+msgid "Networking"
+msgstr ""
+
+#: main.c:72 misc.c:147
+msgid "ISDN"
+msgstr ""
+
+#: main.c:73
+msgid "'root' password"
+msgstr ""
+
+#: main.c:74
+msgid "'admin' password"
+msgstr ""
+
+#: main.c:90
+msgid "              <Tab>/<Alt-Tab> between elements   |  <Space> selects"
+msgstr ""
+
+#: main.c:97
+msgid "Section menu"
+msgstr ""
+
+#: main.c:98
+msgid "Select the item you wish to configure."
+msgstr ""
+
+#: main.c:99
+msgid "Quit"
+msgstr ""
+
+#: main.c:172
+msgid "Setup is complete."
+msgstr ""
+
+#: main.c:174 netstuff.c:733 networking.c:560 networking.c:653
+msgid "Warning"
+msgstr ""
+
+#: main.c:175
+msgid ""
+"Initial setup was not entirely complete. You must ensure that Setup is "
+"properly finished by running setup again at the shell."
+msgstr ""
+
+#: misc.c:62
+#, c-format
+msgid "Unable to write %s/main/hostname.conf"
+msgstr ""
+
+#: misc.c:71
+msgid "Unable to open main hosts file."
+msgstr ""
+
+#: misc.c:76
+msgid "Unable to write /etc/hosts."
+msgstr ""
+
+#: misc.c:117
+msgid "Unable to write /etc/hosts.deny."
+msgstr ""
+
+#: misc.c:125
+msgid "Unable to write /etc/hosts.allow."
+msgstr ""
+
+#: misc.c:136
+msgid "Unable to set hostname."
+msgstr ""
+
+#: misc.c:147
+msgid "Scanning and configuring ISDN devices."
+msgstr ""
+
+#: misc.c:148
+msgid "Unable to scan for ISDN devices."
+msgstr ""
+
+#: netstuff.c:86
+#, c-format
+msgid "Interface - %s"
+msgstr ""
+
+#: netstuff.c:91
+#, c-format
+msgid "Enter the IP address information for the %s interface."
+msgstr ""
+
+#: netstuff.c:103
+msgid "Static"
+msgstr ""
+
+#: netstuff.c:104
+msgid "DHCP"
+msgstr ""
+
+#: netstuff.c:105
+msgid "PPP DIALUP (PPPoE, modem, ATM ...)"
+msgstr ""
+
+#: netstuff.c:113
+msgid "DHCP Hostname:"
+msgstr ""
+
+#: netstuff.c:115
+msgid "Force DHCP MTU:"
+msgstr ""
+
+#: netstuff.c:134
+msgid "IP address:"
+msgstr ""
+
+#: netstuff.c:146
+msgid "Network mask:"
+msgstr ""
+
+#: netstuff.c:173 networking.c:749
+msgid "The following fields are invalid:"
+msgstr ""
+
+#: netstuff.c:183
+msgid "IP address"
+msgstr ""
+
+#: netstuff.c:189
+msgid "Network mask"
+msgstr ""
+
+#: netstuff.c:198
+msgid "DHCP hostname"
+msgstr ""
+
+#: netstuff.c:396 netstuff.c:709
+msgid "Unset"
+msgstr ""
+
+#: netstuff.c:669
+#, c-format
+msgid "Please choose a networkcard for the following interface - %s."
+msgstr ""
+
+#: netstuff.c:672
+msgid "Extended Network Menu"
+msgstr ""
+
+#: netstuff.c:673 networking.c:520
+msgid "Select"
+msgstr ""
+
+#: netstuff.c:673
+msgid "Identify"
+msgstr ""
+
+#: netstuff.c:678
+msgid "Device Identification"
+msgstr ""
+
+#: netstuff.c:678
+msgid "The lights on the selected port should flash now for 10 seconds..."
+msgstr ""
+
+#: netstuff.c:679
+msgid "Identification is not supported by this interface."
+msgstr ""
+
+#: netstuff.c:691
+msgid "There are no unassigned interfaces on your system."
+msgstr ""
+
+#: netstuff.c:732
+#, c-format
+msgid "Do you really want to remove the assigned %s interface?"
+msgstr ""
+
+#: netstuff.c:755
+msgid "Select network driver"
+msgstr ""
+
+#: netstuff.c:755
+msgid "Set additional module parameters"
+msgstr ""
+
+#: netstuff.c:762
+msgid "Loading module..."
+msgstr ""
+
+#: netstuff.c:777
+msgid "Unable to load driver module."
+msgstr ""
+
+#: netstuff.c:780
+msgid "Module name cannot be blank."
+msgstr ""
+
+#: networking.c:110
+msgid "Stopping network..."
+msgstr ""
+
+#: networking.c:115
+msgid "Restarting network..."
+msgstr ""
+
+#: networking.c:146
+msgid "No GREEN interface assigned."
+msgstr ""
+
+#: networking.c:152
+msgid "Missing an IP address on GREEN."
+msgstr ""
+
+#: networking.c:163
+msgid "Error"
+msgstr ""
+
+#: networking.c:163
+msgid "Ignore"
+msgstr ""
+
+#: networking.c:164
+msgid "No RED interface assigned."
+msgstr ""
+
+#: networking.c:173
+msgid "Missing an IP address on RED."
+msgstr ""
+
+#: networking.c:183
+msgid "No ORANGE interface assigned."
+msgstr ""
+
+#: networking.c:189
+msgid "Missing an IP address on ORANGE."
+msgstr ""
+
+#: networking.c:199
+msgid "No BLUE interface assigned."
+msgstr ""
+
+#: networking.c:205
+msgid "Missing an IP address on BLUE."
+msgstr ""
+
+#: networking.c:217
+msgid "Misssing DNS."
+msgstr ""
+
+#: networking.c:224
+msgid "Missing Default Gateway."
+msgstr ""
+
+#: networking.c:237 networking.c:304
+msgid "Network configuration type"
+msgstr ""
+
+#: networking.c:238 networking.c:409
+msgid "Drivers and card assignments"
+msgstr ""
+
+#: networking.c:239 networking.c:640
+msgid "Address settings"
+msgstr ""
+
+#: networking.c:240 networking.c:743
+msgid "DNS and Gateway settings"
+msgstr ""
+
+#: networking.c:260
+msgid "When configuration is complete, a network restart will be required."
+msgstr ""
+
+#: networking.c:267
+#, c-format
+msgid ""
+"Current config: %s\n"
+"\n"
+"%s"
+msgstr ""
+
+#: networking.c:268
+msgid "Network configuration menu"
+msgstr ""
+
+#: networking.c:269 networking.c:520 networking.c:642
+msgid "Done"
+msgstr ""
+
+#: networking.c:300
+#, c-format
+msgid ""
+"Select the network configuration for %s. The following configuration types "
+"list those interfaces which have ethernet attached. If you change this "
+"setting, a network restart will be required, and you will have to "
+"reconfigure the network driver assignments."
+msgstr ""
+
+#: networking.c:307
+#, c-format
+msgid ""
+"Not enough netcards for your choice.\n"
+"\n"
+"Needed: %d - Available: %d\n"
+msgstr ""
+
+#: networking.c:359
+msgid ""
+"Configure network drivers, and which interface each card is assigned to. The current configuration is as follows:\n"
+"\n"
+msgstr ""
+
+#: networking.c:408
+msgid "Do you wish to change these settings?"
+msgstr ""
+
+#: networking.c:447
+msgid "Restarting non-local network..."
+msgstr ""
+
+#: networking.c:464
+msgid ""
+"Please choose the interface you wish to change.\n"
+"\n"
+msgstr ""
+
+#: networking.c:519
+msgid "Assigned Cards"
+msgstr ""
+
+#: networking.c:520
+msgid "Remove"
+msgstr ""
+
+#: networking.c:556 networking.c:649
+#, c-format
+msgid ""
+"If you change this IP address, and you are logged in remotely, your "
+"connection to the %s machine will be broken, and you will have to reconnect "
+"on the new IP. This is a risky operation, and should only be attempted if "
+"you have physical access to the machine, should something go wrong."
+msgstr ""
+
+#: networking.c:641
+msgid "Select the interface you wish to reconfigure."
+msgstr ""
+
+#: networking.c:729
+msgid "Default gateway:"
+msgstr ""
+
+#: networking.c:744
+msgid ""
+"Enter the DNS and gateway information. These settings are used only with "
+"Static IP (and DHCP if DNS set) on the RED interface."
+msgstr ""
+
+#: networking.c:773
+msgid "Default gateway"
+msgstr ""
+
+#: networking.c:780
+msgid "Secondary DNS specified without a Primary DNS"
+msgstr ""
+
+#: passwords.c:33
+msgid ""
+"Enter the 'root' user password. Login as this user for commandline access."
+msgstr ""
+
+#: passwords.c:38 passwords.c:61
+msgid "Setting password"
+msgstr ""
+
+#: passwords.c:38
+msgid "Setting 'root' password...."
+msgstr ""
+
+#: passwords.c:39
+msgid "Problem setting 'root' password."
+msgstr ""
+
+#: passwords.c:53
+#, c-format
+msgid ""
+"Enter %s 'admin' user password. This is the user to use for logging into the"
+" %s web administration pages."
+msgstr ""
+
+#: passwords.c:60
+#, c-format
+msgid "Setting %s 'admin' user password..."
+msgstr ""
+
+#: passwords.c:62
+#, c-format
+msgid "Problem setting %s 'admin' user password."
+msgstr ""
+
+#: passwords.c:76
+msgid "Password:"
+msgstr ""
+
+#: passwords.c:77
+msgid "Again:"
+msgstr ""
+
+#: passwords.c:95
+msgid "Password cannot be blank."
+msgstr ""
+
+#: passwords.c:102
+msgid "Passwords do not match."
+msgstr ""
+
+#: passwords.c:109
+msgid "Password cannot contain spaces."
+msgstr ""
+
+#: timezone.c:77
+msgid "Choose the timezone you are in from the list below."
+msgstr ""

diff --git a/src/setup/po/tr.po b/src/setup/po/tr.po
index 758a66e43f11470e1b4c8ac9c8d9f4080bfa09eb..dcb417de7ed081c362fa11b2238e6e881954720a 100644 (file)
--- a/src/setup/po/tr.po
+++ b/src/setup/po/tr.po
@@ -3,13 +3,14 @@
 # This file is distributed under the same license as the PACKAGE package.
 # 
 # Translators:
+# Kudret Emre <kudretemre@hotmail.com.tr>, 2014
 msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2014-08-21 15:12+0000\n"
-"PO-Revision-Date: 2014-08-21 15:13+0000\n"
-"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"PO-Revision-Date: 2014-09-30 20:41+0000\n"
+"Last-Translator: Kudret Emre <kudretemre@hotmail.com.tr>\n"
 "Language-Team: Turkish (http://www.transifex.com/projects/p/ipfire/language/tr/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -19,31 +20,31 @@ msgstr ""
 
 #: dhcp.c:50
 msgid "Start address:"
-msgstr ""
+msgstr "Başlangıç adresi:"
 
 #: dhcp.c:51
 msgid "End address:"
-msgstr ""
+msgstr "Bitiş adresi:"
 
 #: dhcp.c:52 networking.c:717
 msgid "Primary DNS:"
-msgstr ""
+msgstr "Birincil DNS:"
 
 #: dhcp.c:53 networking.c:723
 msgid "Secondary DNS:"
-msgstr ""
+msgstr "İkincil DNS:"
 
 #: dhcp.c:54
 msgid "Default lease (mins):"
-msgstr ""
+msgstr "Varsayılan kira (dakika):"
 
 #: dhcp.c:55
 msgid "Max lease (mins):"
-msgstr ""
+msgstr "En fazla kira (dakika):"
 
 #: dhcp.c:56
 msgid "Domain name suffix:"
-msgstr ""
+msgstr "Etki alanı adı son eki:"
 
 #: dhcp.c:86 dhcp.c:93 dhcp.c:101 domainname.c:34 hostname.c:37 keymap.c:70
 #: misc.c:40 misc.c:52 netstuff.c:377 netstuff.c:566 netstuff.c:704
@@ -51,19 +52,19 @@ msgstr ""
 #: networking.c:442 networking.c:552 networking.c:603 networking.c:610
 #: networking.c:713 timezone.c:63
 msgid "Unable to open settings file"
-msgstr ""
+msgstr "Ayar dosyası açılamıyor"
 
 #: dhcp.c:111
 msgid "DHCP server configuration"
-msgstr ""
+msgstr "DHCP sunucu yapılandırması"
 
 #: dhcp.c:116
 msgid "Configure the DHCP server by entering the settings information."
-msgstr ""
+msgstr "Ayarlar bilgisini girerek DHCP sunucusunu yapılandırın."
 
 #: dhcp.c:125
 msgid "Enabled"
-msgstr ""
+msgstr "Etkin"
 
 #: dhcp.c:142 domainname.c:43 hostname.c:47 keymap.c:86 main.c:99 main.c:172
 #: main.c:174 netstuff.c:157 netstuff.c:733 netstuff.c:756 networking.c:163
@@ -71,367 +72,367 @@ msgstr ""
 #: networking.c:642 networking.c:653 networking.c:746 passwords.c:89
 #: timezone.c:78
 msgid "OK"
-msgstr ""
+msgstr "Tamam"
 
 #: dhcp.c:143 domainname.c:43 hostname.c:47 keymap.c:86 netstuff.c:158
 #: netstuff.c:673 netstuff.c:733 netstuff.c:756 networking.c:305
 #: networking.c:410 networking.c:560 networking.c:653 networking.c:746
 #: passwords.c:89 timezone.c:78
 msgid "Cancel"
-msgstr ""
+msgstr "İptal"
 
 #: dhcp.c:156
 msgid ""
 "The following fields are invalid:\n"
 "\n"
-msgstr ""
+msgstr "Aşağıdaki alanlar geçersiz:\n\n"
 
 #: dhcp.c:159
 msgid "Start address"
-msgstr ""
+msgstr "Başlangış adresi"
 
 #: dhcp.c:165
 msgid "End address"
-msgstr ""
+msgstr "Bitiş adresi"
 
 #: dhcp.c:173 networking.c:755
 msgid "Primary DNS"
-msgstr ""
+msgstr "Birincil DNS"
 
 #: dhcp.c:182 networking.c:764
 msgid "Secondary DNS"
-msgstr ""
+msgstr "İkincil DNS"
 
 #: dhcp.c:189
 msgid "Default lease time"
-msgstr ""
+msgstr "Varsayılan kira süresi"
 
 #: dhcp.c:195
 msgid "Max. lease time"
-msgstr ""
+msgstr "En fazla kira süresi"
 
 #: domainname.c:42 main.c:70
 msgid "Domain name"
-msgstr ""
+msgstr "Etki alanı adı"
 
 #: domainname.c:42
 msgid "Enter Domain name"
-msgstr ""
+msgstr "Etki alanı adını girin"
 
 #: domainname.c:48
 msgid "Domain name cannot be empty."
-msgstr ""
+msgstr "Etki alanı adı boş olamaz."
 
 #: domainname.c:50
 msgid "Domain name cannot contain spaces."
-msgstr ""
+msgstr "Etki alanı adı boşluk içeremez."
 
 #: domainname.c:53
 msgid "Domain name may only contain letters, numbers, hyphens and periods."
-msgstr ""
+msgstr "Etki alanı adı sadece harf, sayı, tire ve nokta içerebilir."
 
 #: hostname.c:46 main.c:69
 msgid "Hostname"
-msgstr ""
+msgstr "Ana bilgisayar adı"
 
 #: hostname.c:46
 msgid "Enter the machine's hostname."
-msgstr ""
+msgstr "Makinanın ana bilgisayar adını girin."
 
 #: hostname.c:53
 msgid "Hostname cannot be empty."
-msgstr ""
+msgstr "Ana bilgisaya adı boş olamaz."
 
 #: hostname.c:55
 msgid "Hostname cannot contain spaces."
-msgstr ""
+msgstr "Ana bilgisayaradı boşluk içeremez."
 
 #: hostname.c:58
 msgid "Hostname may only contain letters, numbers and hyphens."
-msgstr ""
+msgstr "Ana bilgisayar adı sadece harf, sayı ve tire içerebilir."
 
 #: keymap.c:84 main.c:67
 msgid "Keyboard mapping"
-msgstr ""
+msgstr "Klavye eşlemesi"
 
 #: keymap.c:85
 msgid "Choose the type of keyboard you are using from the list below."
-msgstr ""
+msgstr "Aşağıdaki listeden kullandığınız klavye tipini seçin."
 
 #: main.c:68 timezone.c:77
 msgid "Timezone"
-msgstr ""
+msgstr "Zaman dilimi"
 
 #: main.c:71 networking.c:110 networking.c:115 networking.c:447
 msgid "Networking"
-msgstr ""
+msgstr "Ağ"
 
 #: main.c:72 misc.c:147
 msgid "ISDN"
-msgstr ""
+msgstr "ISDN"
 
 #: main.c:73
 msgid "'root' password"
-msgstr ""
+msgstr "'root' şifresi"
 
 #: main.c:74
 msgid "'admin' password"
-msgstr ""
+msgstr "'admin' şifresi"
 
 #: main.c:90
 msgid "              <Tab>/<Alt-Tab> between elements   |  <Space> selects"
-msgstr ""
+msgstr "              <Tab>/<Alt-Tab> elementler arası geçiş   |  <Space> seç"
 
 #: main.c:97
 msgid "Section menu"
-msgstr ""
+msgstr "Bölüm menüsü"
 
 #: main.c:98
 msgid "Select the item you wish to configure."
-msgstr ""
+msgstr "Yapılandırmak istediğiniz öğeyi seçin"
 
 #: main.c:99
 msgid "Quit"
-msgstr ""
+msgstr "Çıkış"
 
 #: main.c:172
 msgid "Setup is complete."
-msgstr ""
+msgstr "Kurulum tamamlandı."
 
 #: main.c:174 netstuff.c:733 networking.c:560 networking.c:653
 msgid "Warning"
-msgstr ""
+msgstr "Uyarı"
 
 #: main.c:175
 msgid ""
 "Initial setup was not entirely complete. You must ensure that Setup is "
 "properly finished by running setup again at the shell."
-msgstr ""
+msgstr "İlk kurulum tamamen yapılamadı. Kurulumun kabuktan yeniden başlatılıp düzgünce bitirildiğinden emin olmalısınız."
 
 #: misc.c:62
 #, c-format
 msgid "Unable to write %s/main/hostname.conf"
-msgstr ""
+msgstr "%s/main/hostname.conf yazılamıyor"
 
 #: misc.c:71
 msgid "Unable to open main hosts file."
-msgstr ""
+msgstr "Ana hosts dosyası açılamıyor."
 
 #: misc.c:76
 msgid "Unable to write /etc/hosts."
-msgstr ""
+msgstr "/etc/hosts yazılamıyor."
 
 #: misc.c:117
 msgid "Unable to write /etc/hosts.deny."
-msgstr ""
+msgstr " /etc/hosts.deny yazılamıyor."
 
 #: misc.c:125
 msgid "Unable to write /etc/hosts.allow."
-msgstr ""
+msgstr "/etc/hosts.allow yazılamıyor."
 
 #: misc.c:136
 msgid "Unable to set hostname."
-msgstr ""
+msgstr "Ana bilgisayar adı ayarlanamıyor."
 
 #: misc.c:147
 msgid "Scanning and configuring ISDN devices."
-msgstr ""
+msgstr "ISDN cihazları taranıyor ve yapılandırılıyor."
 
 #: misc.c:148
 msgid "Unable to scan for ISDN devices."
-msgstr ""
+msgstr "ISDN cihazları için tarama yapılamıyor."
 
 #: netstuff.c:86
 #, c-format
 msgid "Interface - %s"
-msgstr ""
+msgstr "Arayüz - %s"
 
 #: netstuff.c:91
 #, c-format
 msgid "Enter the IP address information for the %s interface."
-msgstr ""
+msgstr "%s arayüzü için IP adresi bilgisini girin."
 
 #: netstuff.c:103
 msgid "Static"
-msgstr ""
+msgstr "Statik"
 
 #: netstuff.c:104
 msgid "DHCP"
-msgstr ""
+msgstr "DHCP"
 
 #: netstuff.c:105
 msgid "PPP DIALUP (PPPoE, modem, ATM ...)"
-msgstr ""
+msgstr "PPP DIALUP (PPPoE, modem, ATM ...)"
 
 #: netstuff.c:113
 msgid "DHCP Hostname:"
-msgstr ""
+msgstr "DHCP Ana bilgisayar adı:"
 
 #: netstuff.c:115
 msgid "Force DHCP MTU:"
-msgstr ""
+msgstr "Force DHCP MTU:"
 
 #: netstuff.c:134
 msgid "IP address:"
-msgstr ""
+msgstr "IP adresi:"
 
 #: netstuff.c:146
 msgid "Network mask:"
-msgstr ""
+msgstr "Ağ maskesi:"
 
 #: netstuff.c:173 networking.c:749
 msgid "The following fields are invalid:"
-msgstr ""
+msgstr "Aşağıdaki alanlar geçersiz:"
 
 #: netstuff.c:183
 msgid "IP address"
-msgstr ""
+msgstr "IP adresi"
 
 #: netstuff.c:189
 msgid "Network mask"
-msgstr ""
+msgstr "Ağ maskesi"
 
 #: netstuff.c:198
 msgid "DHCP hostname"
-msgstr ""
+msgstr "DHCP Ana bilgisayar adı"
 
 #: netstuff.c:396 netstuff.c:709
 msgid "Unset"
-msgstr ""
+msgstr "Unset"
 
 #: netstuff.c:669
 #, c-format
 msgid "Please choose a networkcard for the following interface - %s."
-msgstr ""
+msgstr "Lütfen %s arayüzü için bit ağ kartı seçin."
 
 #: netstuff.c:672
 msgid "Extended Network Menu"
-msgstr ""
+msgstr "Genişletilmiş Ağ Menüsü"
 
 #: netstuff.c:673 networking.c:520
 msgid "Select"
-msgstr ""
+msgstr "Seç"
 
 #: netstuff.c:673
 msgid "Identify"
-msgstr ""
+msgstr "Tanımla"
 
 #: netstuff.c:678
 msgid "Device Identification"
-msgstr ""
+msgstr "Cihaz Tanımlama"
 
 #: netstuff.c:678
 msgid "The lights on the selected port should flash now for 10 seconds..."
-msgstr ""
+msgstr "Seçilen porttaki ışıklar şimdi 10 saniye boyunca yanıp sönmeli..."
 
 #: netstuff.c:679
 msgid "Identification is not supported by this interface."
-msgstr ""
+msgstr "Bu arayüz kimdik doğrulamayı desteklemiyor."
 
 #: netstuff.c:691
 msgid "There are no unassigned interfaces on your system."
-msgstr ""
+msgstr "Sisteminizde atanmamış arayüz yok."
 
 #: netstuff.c:732
 #, c-format
 msgid "Do you really want to remove the assigned %s interface?"
-msgstr ""
+msgstr "Atanmış %s arayüzü gerçekten kaldırmak istiyor musunuz?"
 
 #: netstuff.c:755
 msgid "Select network driver"
-msgstr ""
+msgstr "Ağ sürücüsünü seç"
 
 #: netstuff.c:755
 msgid "Set additional module parameters"
-msgstr ""
+msgstr "Ek modül parametrelerini ayarla"
 
 #: netstuff.c:762
 msgid "Loading module..."
-msgstr ""
+msgstr "Modül yükleniyor..."
 
 #: netstuff.c:777
 msgid "Unable to load driver module."
-msgstr ""
+msgstr "Sürücü modülü yüklenemiyor."
 
 #: netstuff.c:780
 msgid "Module name cannot be blank."
-msgstr ""
+msgstr "Modül ismi boş olamaz."
 
 #: networking.c:110
 msgid "Stopping network..."
-msgstr ""
+msgstr "Ağ durduruluyor..."
 
 #: networking.c:115
 msgid "Restarting network..."
-msgstr ""
+msgstr "Ağ yeniden başlatılıyor..."
 
 #: networking.c:146
 msgid "No GREEN interface assigned."
-msgstr ""
+msgstr "Atanmış YEŞİL arayüz yok."
 
 #: networking.c:152
 msgid "Missing an IP address on GREEN."
-msgstr ""
+msgstr "YEŞİL üzerinde kayıp IP adresi."
 
 #: networking.c:163
 msgid "Error"
-msgstr ""
+msgstr "Hata"
 
 #: networking.c:163
 msgid "Ignore"
-msgstr ""
+msgstr "Yoksay"
 
 #: networking.c:164
 msgid "No RED interface assigned."
-msgstr ""
+msgstr "Atanmış KIRMIZI arayüz yok."
 
 #: networking.c:173
 msgid "Missing an IP address on RED."
-msgstr ""
+msgstr "KIRMIZI üzerinde kayıp IP adresi."
 
 #: networking.c:183
 msgid "No ORANGE interface assigned."
-msgstr ""
+msgstr "Atanmış TURUNCU arayüz yok."
 
 #: networking.c:189
 msgid "Missing an IP address on ORANGE."
-msgstr ""
+msgstr "TURUNCU üzerinde kayıp IP adresi."
 
 #: networking.c:199
 msgid "No BLUE interface assigned."
-msgstr ""
+msgstr "Atanmış MAVİ arayüz yok."
 
 #: networking.c:205
 msgid "Missing an IP address on BLUE."
-msgstr ""
+msgstr "MAVİ üzerinde kayıp IP adresi."
 
 #: networking.c:217
 msgid "Misssing DNS."
-msgstr ""
+msgstr "Kayıp DNS."
 
 #: networking.c:224
 msgid "Missing Default Gateway."
-msgstr ""
+msgstr "Kayıp Varsayılan Ağ Geçidi"
 
 #: networking.c:237 networking.c:304
 msgid "Network configuration type"
-msgstr ""
+msgstr "Ağ yapılandırma tipi"
 
 #: networking.c:238 networking.c:409
 msgid "Drivers and card assignments"
-msgstr ""
+msgstr "Sürücüler ve kart atamaları"
 
 #: networking.c:239 networking.c:640
 msgid "Address settings"
-msgstr ""
+msgstr "Adres ayarları"
 
 #: networking.c:240 networking.c:743
 msgid "DNS and Gateway settings"
-msgstr ""
+msgstr "DNS ve Ağ Geçidi ayarları"
 
 #: networking.c:260
 msgid "When configuration is complete, a network restart will be required."
-msgstr ""
+msgstr "Yapılandırma tamamlandığında yeniden başlatma gerekecek."
 
 #: networking.c:267
 #, c-format
@@ -439,15 +440,15 @@ msgid ""
 "Current config: %s\n"
 "\n"
 "%s"
-msgstr ""
+msgstr "Geçerli yapılandırma: %s\n\n%s"
 
 #: networking.c:268
 msgid "Network configuration menu"
-msgstr ""
+msgstr "Ağ yapılandırma menüsü"
 
 #: networking.c:269 networking.c:520 networking.c:642
 msgid "Done"
-msgstr ""
+msgstr "Tamam"
 
 #: networking.c:300
 #, c-format
@@ -456,7 +457,7 @@ msgid ""
 "list those interfaces which have ethernet attached. If you change this "
 "setting, a network restart will be required, and you will have to "
 "reconfigure the network driver assignments."
-msgstr ""
+msgstr "%s için ağ yapılandırmasını seçin. Aşağıdaki yapılandırma tipi listesi ethernet ayarı yapılmış olan arayüzleri gösterir. Eğer bu ayarları değiştirirseniz, ağın yeniden başlatılması ve ağ sürücüleri atamalarını tekrar yapılandırmanız gerekecektir."
 
 #: networking.c:307
 #, c-format
@@ -464,35 +465,35 @@ msgid ""
 "Not enough netcards for your choice.\n"
 "\n"
 "Needed: %d - Available: %d\n"
-msgstr ""
+msgstr "Seçiminiz için yeterli kart yok.\n\nGereken: %d - Kullanılabilir: %d\n"
 
 #: networking.c:359
 msgid ""
 "Configure network drivers, and which interface each card is assigned to. The current configuration is as follows:\n"
 "\n"
-msgstr ""
+msgstr "Ağ sürücülerini ve her bir kart için atanmış arayüzleri yapılandırın. Geçerli yapılandırma aşağıdaki gibidir:\n\n"
 
 #: networking.c:408
 msgid "Do you wish to change these settings?"
-msgstr ""
+msgstr "Bu ayarları değiştirmek istiyor musunuz?"
 
 #: networking.c:447
 msgid "Restarting non-local network..."
-msgstr ""
+msgstr "Yerel olmayan ağ yeniden başlatılıyor..."
 
 #: networking.c:464
 msgid ""
 "Please choose the interface you wish to change.\n"
 "\n"
-msgstr ""
+msgstr "Lütfen değiştirmek istediğiniz arayüzü seçin.\n\n"
 
 #: networking.c:519
 msgid "Assigned Cards"
-msgstr ""
+msgstr "Atanmış Kartlar"
 
 #: networking.c:520
 msgid "Remove"
-msgstr ""
+msgstr "Kaldır"
 
 #: networking.c:556 networking.c:649
 #, c-format
@@ -501,84 +502,84 @@ msgid ""
 "connection to the %s machine will be broken, and you will have to reconnect "
 "on the new IP. This is a risky operation, and should only be attempted if "
 "you have physical access to the machine, should something go wrong."
-msgstr ""
+msgstr "Eğer bu IP adresini değiştirirseniz, ve uzaktan oturum açmışsanız, %s makinesine olan bağlantınız kopacaktır ve yeni IP adresine tekrar bağlanmanız gerekecektir. Bu riskli bir işlemdir ve bir şeylerin ters gitmesi durumunda makineye fiziksel erişiminiz varsa kullanmalısınız."
 
 #: networking.c:641
 msgid "Select the interface you wish to reconfigure."
-msgstr ""
+msgstr "Yeniden yapılandırmak istediğiniz arayüzü seçin."
 
 #: networking.c:729
 msgid "Default gateway:"
-msgstr ""
+msgstr "Varsayılan ağ geçidi:"
 
 #: networking.c:744
 msgid ""
 "Enter the DNS and gateway information. These settings are used only with "
 "Static IP (and DHCP if DNS set) on the RED interface."
-msgstr ""
+msgstr "DNS ve ağ geçidi bilgisini girin. Bu ayarlar sadece KIRMIZI arayüzde Statik IP  (ve eğer DNS ayarlanmışsa DHCP) ile kullanılacaktır."
 
 #: networking.c:773
 msgid "Default gateway"
-msgstr ""
+msgstr "Varsayılan ağ geçidi"
 
 #: networking.c:780
 msgid "Secondary DNS specified without a Primary DNS"
-msgstr ""
+msgstr "Birincil DNS olmadan İkincil DNS belirtildi."
 
 #: passwords.c:33
 msgid ""
 "Enter the 'root' user password. Login as this user for commandline access."
-msgstr ""
+msgstr "'root' kullanıcı şifresini girin. Komut satırına erişmek için bu kullanıcıyla oturum açın."
 
 #: passwords.c:38 passwords.c:61
 msgid "Setting password"
-msgstr ""
+msgstr "Şifre ayarlanıyor"
 
 #: passwords.c:38
 msgid "Setting 'root' password...."
-msgstr ""
+msgstr "'root' şifresi ayarlanıyor..."
 
 #: passwords.c:39
 msgid "Problem setting 'root' password."
-msgstr ""
+msgstr "'root' şifresi ayarlama sorunu."
 
 #: passwords.c:53
 #, c-format
 msgid ""
 "Enter %s 'admin' user password. This is the user to use for logging into the"
 " %s web administration pages."
-msgstr ""
+msgstr "%s 'admin' kullanıcısı için şifre girin. Bu kullanıcı, %s web yönetim sayfalarını kullanmak için oturum açılacak kullanıcıdır."
 
 #: passwords.c:60
 #, c-format
 msgid "Setting %s 'admin' user password..."
-msgstr ""
+msgstr "%s 'admin' kullanıcısının şifresi ayarlanıyor..."
 
 #: passwords.c:62
 #, c-format
 msgid "Problem setting %s 'admin' user password."
-msgstr ""
+msgstr "%s 'admin' kullanıcı şifresi ayarlama sorunu."
 
 #: passwords.c:76
 msgid "Password:"
-msgstr ""
+msgstr "Şifre:"
 
 #: passwords.c:77
 msgid "Again:"
-msgstr ""
+msgstr "Tekrar:"
 
 #: passwords.c:95
 msgid "Password cannot be blank."
-msgstr ""
+msgstr "Şifre boş olamaz."
 
 #: passwords.c:102
 msgid "Passwords do not match."
-msgstr ""
+msgstr "Şifreler eşleşmiyor."
 
 #: passwords.c:109
 msgid "Password cannot contain spaces."
-msgstr ""
+msgstr "Şifre boşluk içeremez."
 
 #: timezone.c:77
 msgid "Choose the timezone you are in from the list below."
-msgstr ""
+msgstr "Aşağıdaki listeden içinde bulunduğunuz zaman dilimini seçin."

diff --git a/src/setup/po/zh.po b/src/setup/po/zh.po
index 8b7faba17ffefc1d6308e30b356aa3c2dc4d9e0c..70b0a0e62e5e8251e646e2fa769e2a89e5df3f72 100644 (file)
--- a/src/setup/po/zh.po
+++ b/src/setup/po/zh.po
@@ -3,13 +3,14 @@
 # This file is distributed under the same license as the PACKAGE package.
 # 
 # Translators:
+# ipfire <qiwenqiu@yahoo.com.hk>, 2015
 msgid ""
 msgstr ""
 "Project-Id-Version: IPFire Project\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2014-08-21 15:12+0000\n"
-"PO-Revision-Date: 2014-08-21 15:13+0000\n"
-"Last-Translator: Michael Tremer <michael.tremer@ipfire.org>\n"
+"PO-Revision-Date: 2015-01-31 09:57+0000\n"
+"Last-Translator: ipfire <qiwenqiu@yahoo.com.hk>\n"
 "Language-Team: Chinese (http://www.transifex.com/projects/p/ipfire/language/zh/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -19,31 +20,31 @@ msgstr ""
 
 #: dhcp.c:50
 msgid "Start address:"
-msgstr ""
+msgstr "起始地址"
 
 #: dhcp.c:51
 msgid "End address:"
-msgstr ""
+msgstr "结束地址"
 
 #: dhcp.c:52 networking.c:717
 msgid "Primary DNS:"
-msgstr ""
+msgstr "首选DNS服务器"
 
 #: dhcp.c:53 networking.c:723
 msgid "Secondary DNS:"
-msgstr ""
+msgstr "备用DNS服务器"
 
 #: dhcp.c:54
 msgid "Default lease (mins):"
-msgstr ""
+msgstr "默认租约(分钟)"
 
 #: dhcp.c:55
 msgid "Max lease (mins):"
-msgstr ""
+msgstr "最大租约(分钟)"
 
 #: dhcp.c:56
 msgid "Domain name suffix:"
-msgstr ""
+msgstr "域名后缀"
 
 #: dhcp.c:86 dhcp.c:93 dhcp.c:101 domainname.c:34 hostname.c:37 keymap.c:70
 #: misc.c:40 misc.c:52 netstuff.c:377 netstuff.c:566 netstuff.c:704
@@ -51,19 +52,19 @@ msgstr ""
 #: networking.c:442 networking.c:552 networking.c:603 networking.c:610
 #: networking.c:713 timezone.c:63
 msgid "Unable to open settings file"
-msgstr ""
+msgstr "无法打开配置文件"
 
 #: dhcp.c:111
 msgid "DHCP server configuration"
-msgstr ""
+msgstr "DHCP服务器配置"
 
 #: dhcp.c:116
 msgid "Configure the DHCP server by entering the settings information."
-msgstr ""
+msgstr "DHCP服务器配置信息"
 
 #: dhcp.c:125
 msgid "Enabled"
-msgstr ""
+msgstr "应用"
 
 #: dhcp.c:142 domainname.c:43 hostname.c:47 keymap.c:86 main.c:99 main.c:172
 #: main.c:174 netstuff.c:157 netstuff.c:733 netstuff.c:756 networking.c:163
@@ -71,14 +72,14 @@ msgstr ""
 #: networking.c:642 networking.c:653 networking.c:746 passwords.c:89
 #: timezone.c:78
 msgid "OK"
-msgstr ""
+msgstr "确定"
 
 #: dhcp.c:143 domainname.c:43 hostname.c:47 keymap.c:86 netstuff.c:158
 #: netstuff.c:673 netstuff.c:733 netstuff.c:756 networking.c:305
 #: networking.c:410 networking.c:560 networking.c:653 networking.c:746
 #: passwords.c:89 timezone.c:78
 msgid "Cancel"
-msgstr ""
+msgstr "取消"
 
 #: dhcp.c:156
 msgid ""

diff --git a/src/squid-accounting/acct-lib.pl b/src/squid-accounting/acct-lib.pl
index a19140d04cd055714d8dae3dd556b73222488d85..bac1e3632fb3f2b4b0cdec4804179884e0b210de 100644 (file)
--- a/src/squid-accounting/acct-lib.pl
+++ b/src/squid-accounting/acct-lib.pl
@@ -387,6 +387,7 @@ sub pdf2 {
        my @billar              = @{$_[0]}; #DATA from sendbill (just host/values)
        my $month               = $_[1];
        $month                  = '0'.$month if $month < 10;
+       $month                  = '12' if $month == 0;
        my $year                = $_[2];
        my $mwst                = $_[3];
        my @address_cust= @{$_[4]}; #Array which contains customer and hoster adresses and some additional info from billgroup

diff --git a/src/squid-accounting/acct.pl b/src/squid-accounting/acct.pl
index d535901b679f62ba6bb27cce76a2860b9ae9382e..79fc7bae43eede00a9444d2c5e761cf7ec60793a 100755 (executable)
--- a/src/squid-accounting/acct.pl
+++ b/src/squid-accounting/acct.pl
@@ -210,7 +210,9 @@ sub sendbill {
        my @now = localtime(time);
        $now[5] = $now[5] + 1900;
        my $actmonth = $now[4];
-       my $month                       = '0'.$actmonth if $actmonth < 10;
+       my $month;
+       $month = '0'.$actmonth if $actmonth < 10;
+       $month = '12' if $actmonth == 0;
        my $actyear  = $now[5];
        my ($from,$till)=&ACCT::getmonth($actmonth,$actyear);                                   #FIXME month and year as variables!
        my @billar = &ACCT::GetTaValues($from,$till,$rggrp);

diff --git a/tools/make-functions b/tools/make-functions
index 356d7a6174a1d233e0c88168695ccdd1709d9a99..4fbb530f45f4f15dd057b760351b9b536e9f6ee9 100644 (file)
--- a/tools/make-functions
+++ b/tools/make-functions
@@ -738,4 +738,19 @@ update_langs() {
                $BASEDIR/tools/check_strings.pl it > $BASEDIR/doc/language_issues.it
                $BASEDIR/tools/check_langs.sh > $BASEDIR/doc/language_missings
                beautify message DONE
+
+               echo -ne "Updating language lists..."
+               update_language_list ${BASEDIR}/src/installer/po
+               update_language_list ${BASEDIR}/src/setup/po
+               beautify message DONE
+}
+
+update_language_list() {
+       local path="${1}"
+
+       local lang
+       for lang in ${path}/*.po; do
+               lang="$(basename "${lang}")"
+               echo "${lang%*.po}"
+       done | sort -u > "${path}/LINGUAS"
 }