From: Michael Tremer Date: Tue, 22 Apr 2008 14:37:53 +0000 (+0200) Subject: Introduced access point feature. X-Git-Tag: v2.3-beta1~95 X-Git-Url: http://git.ipfire.org/?p=people%2Fpmueller%2Fipfire-2.x.git;a=commitdiff_plain;h=a6090720da282a83a0bf67acbf5f3f9c21a2864c Introduced access point feature. There is still missing the rootfile of madwifi. --- diff --git a/config/kernel/kernel.config.i586 b/config/kernel/kernel.config.i586 index 1bf00c448c..c51afc50f3 100644 --- a/config/kernel/kernel.config.i586 +++ b/config/kernel/kernel.config.i586 @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.16.57-ipfire -# Wed Mar 26 10:02:36 2008 +# Mon Apr 21 16:23:42 2008 # CONFIG_X86_32=y CONFIG_SEMAPHORE_SLEEPERS=y @@ -628,6 +628,7 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m # CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set CONFIG_KLIPS=m # @@ -1264,7 +1265,48 @@ CONFIG_S2IO=m # # Wireless LAN (non-hamradio) # -# CONFIG_NET_RADIO is not set +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_ARLAN is not set +# CONFIG_WAVELAN is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +CONFIG_PRISM54=m +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m +CONFIG_HOSTAP_CS=m +CONFIG_NET_WIRELESS=y # # PCMCIA network device support @@ -2226,6 +2268,7 @@ CONFIG_USB_BELKIN=y CONFIG_USB_ARMLINUX=y CONFIG_USB_EPSON2888=y CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_ZD1201 is not set # CONFIG_USB_MON is not set # diff --git a/config/kernel/kernel.config.i586.smp b/config/kernel/kernel.config.i586.smp index 9b63623457..8f817f3d2d 100644 --- a/config/kernel/kernel.config.i586.smp +++ b/config/kernel/kernel.config.i586.smp @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.16.57-ipfire -# Wed Mar 26 10:05:08 2008 +# Mon Apr 21 16:25:48 2008 # CONFIG_X86_32=y CONFIG_SEMAPHORE_SLEEPERS=y @@ -634,6 +634,7 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m # CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set CONFIG_KLIPS=m # @@ -1267,7 +1268,48 @@ CONFIG_S2IO=m # # Wireless LAN (non-hamradio) # -# CONFIG_NET_RADIO is not set +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_ARLAN is not set +# CONFIG_WAVELAN is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +CONFIG_PRISM54=m +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m +CONFIG_HOSTAP_CS=m +CONFIG_NET_WIRELESS=y # # PCMCIA network device support @@ -2227,6 +2269,7 @@ CONFIG_USB_BELKIN=y CONFIG_USB_ARMLINUX=y CONFIG_USB_EPSON2888=y CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_ZD1201 is not set # CONFIG_USB_MON is not set # diff --git a/config/madwifi/madwifi.conf b/config/madwifi/madwifi.conf new file mode 100644 index 0000000000..a4a234f379 --- /dev/null +++ b/config/madwifi/madwifi.conf @@ -0,0 +1,295 @@ +##### hostapd configuration file ############################################## +# Empty lines and lines starting with # are ignored + +# AP netdevice name (without 'ap' prefix, i.e., wlan0 uses wlan0ap for +# management frames) +interface=ath0 + +# Driver interface type (hostap/wired/madwifi/prism54; default: hostap) +driver=madwifi + +# hostapd event logger configuration +# +# Two output method: syslog and stdout (only usable if not forking to +# background). +# +# Module bitfield (ORed bitfield of modules that will be logged; -1 = all +# modules): +# bit 0 (1) = IEEE 802.11 +# bit 1 (2) = IEEE 802.1X +# bit 2 (4) = RADIUS +# bit 3 (8) = WPA +# bit 4 (16) = driver interface +# bit 5 (32) = IAPP +# +# Levels (minimum value for logged events): +# 0 = verbose debugging +# 1 = debugging +# 2 = informational messages +# 3 = notification +# 4 = warning +# +logger_syslog=-1 +logger_syslog_level=2 +logger_stdout=-1 +logger_stdout_level=1 + +# Debugging: 0 = no, 1 = minimal, 2 = verbose, 3 = msg dumps, 4 = excessive +debug=0 + +# Dump file for state information (on SIGUSR1) +dump_file=/tmp/hostapd.dump + +# Interface for separate control program. If this is specified, hostapd +# will create this directory and a UNIX domain socket for listening to requests +# from external programs (CLI/GUI, etc.) for status information and +# configuration. The socket file will be named based on the interface name, so +# multiple hostapd processes/interfaces can be run at the same time if more +# than one interface is used. +# /var/run/hostapd is the recommended directory for sockets and by default, +# hostapd_cli will use it when trying to connect with hostapd. +ctrl_interface=/var/run/hostapd + +# Access control for the control interface can be configured by setting the +# directory to allow only members of a group to use sockets. This way, it is +# possible to run hostapd as root (since it needs to change network +# configuration and open raw sockets) and still allow GUI/CLI components to be +# run as non-root users. However, since the control interface can be used to +# change the network configuration, this access needs to be protected in many +# cases. By default, hostapd is configured to use gid 0 (root). If you +# want to allow non-root users to use the contron interface, add a new group +# and change this value to match with that group. Add users that should have +# control interface access to this group. +# +# This variable can be a group name or gid. +#ctrl_interface_group=wheel +ctrl_interface_group=0 + + +##### IEEE 802.11 related configuration ####################################### + +# SSID to be used in IEEE 802.11 management frames +ssid=IPFire + +# Station MAC address -based authentication +# 0 = accept unless in deny list +# 1 = deny unless in accept list +# 2 = use external RADIUS server (accept/deny lists are searched first) +macaddr_acl=0 + +# Accept/deny lists are read from separate files (containing list of +# MAC addresses, one per line). Use absolute path name to make sure that the + +# files can be read on SIGHUP configuration reloads. +#accept_mac_file=/etc/hostapd/hostapd.accept +#deny_mac_file=/etc/hostapd/hostapd.deny + +# IEEE 802.11 specifies two authentication algorithms. hostapd can be +# configured to allow both of these or only one. Open system authentication +# should be used with IEEE 802.1X. +# Bit fields of allowed authentication algorithms: +# bit 0 = Open System Authentication +# bit 1 = Shared Key Authentication (requires WEP) +auth_algs=1 + +# Associate as a station to another AP while still acting as an AP on the same +# channel. +#assoc_ap_addr=00:12:34:56:78:9a + + +##### IEEE 802.1X (and IEEE 802.1aa/D4) related configuration ################# + +# Require IEEE 802.1X authorization +#ieee8021x=0 + +# Use integrated EAP authenticator instead of external RADIUS authentication +# server +#eap_authenticator=0 + +# Path for EAP authenticator user database +#eap_user_file=/etc/hostapd/eap_user + +# CA certificate (PEM or DER file) for EAP-TLS/PEAP/TTLS +#ca_cert=/etc/hostapd/ca.pem + +# Server certificate (PEM or DER file) for EAP-TLS/PEAP/TTLS +#server_cert=/etc/hostapd/server.pem + +# Private key matching with the server certificate for EAP-TLS/PEAP/TTLS +# This may point to the same file as server_cert if both certificate and key +# are included in a single file. PKCS#12 (PFX) file (.p12/.pfx) can also be +# used by commenting out server_cert and specifying the PFX file as the +# private_key. +#private_key=/etc/hostapd/server.prv + +# Passphrase for private key +#private_key_passwd=secret passphrase + +# Configuration data for EAP-SIM database/authentication gateway interface. +# This is a text string in implementation specific format. The example +# implementation in eap_sim_db.c uses this as the file name for the GSM +# authentication triplets. +#eap_sim_db=/etc/hostapd/sim_db + +# Optional displayable message sent with EAP Request-Identity +#eap_message=hello + +# WEP rekeying (disabled if key lengths are not set or are set to 0) +# Key lengths for default/broadcast and individual/unicast keys: +# 5 = 40-bit WEP (also known as 64-bit WEP with 40 secret bits) +# 13 = 104-bit WEP (also known as 128-bit WEP with 104 secret bits) +#wep_key_len_broadcast=5 +#wep_key_len_unicast=5 +# Rekeying period in seconds. 0 = do not rekey (i.e., set keys only once) +#wep_rekey_period=300 + +# EAPOL-Key index workaround (set bit7) for WinXP Supplicant (needed only if +# only broadcast keys are used) +#eapol_key_index_workaround=0 + +# EAP reauthentication period in seconds (default: 3600 seconds; 0 = disable +# reauthentication). +#eap_reauth_period=3600 + + +##### IEEE 802.11f - Inter-Access Point Protocol (IAPP) ####################### + +# Interface to be used for IAPP broadcast packets +#iapp_interface=eth0 + + +##### RADIUS configuration #################################################### +# for IEEE 802.1X with external Authentication Server, IEEE 802.11 +# authentication with external ACL for MAC addresses, and accounting + +# The own IP address of the access point (used as NAS-IP-Address) +#own_ip_addr=127.0.0.1 + +# Optional NAS-Identifier string for RADIUS messages. When used, this should be +# a unique to the NAS within the scope of the RADIUS server. For example, a +# fully qualified domain name can be used here. +#nas_identifier=ap.example.com + +# RADIUS authentication server +#auth_server_addr=127.0.0.1 +#auth_server_port=1812 +#auth_server_shared_secret=secret + +# RADIUS accounting server +#acct_server_addr=127.0.0.1 +#acct_server_port=1813 +#acct_server_shared_secret=secret + +# Secondary RADIUS servers; to be used if primary one does not reply to +# RADIUS packets. These are optional and there can be more than one secondary +# server listed. +#auth_server_addr=127.0.0.2 +#auth_server_port=1812 +#auth_server_shared_secret=secret2 +# +#acct_server_addr=127.0.0.2 +#acct_server_port=1813 +#acct_server_shared_secret=secret2 + +# Retry interval for trying to return to the primary RADIUS server (in +# seconds). RADIUS client code will automatically try to use the next server +# when the current server is not replying to requests. If this interval is set, +# primary server will be retried after configured amount of time even if the +# currently used secondary server is still working. +#radius_retry_primary_interval=600 + +# Interim accounting update interval +# If this is set (larger than 0) and acct_server is configured, hostapd will +# send interim accounting updates every N seconds. Note: if set, this overrides +# possible Acct-Interim-Interval attribute in Access-Accept message. Thus, this +# value should not be configured in hostapd.conf, if RADIUS server is used to +# control the interim interval. +# This value should not be less 600 (10 minutes) and must not be less than +# 60 (1 minute). +#radius_acct_interim_interval=600 + +# hostapd can be used as a RADIUS authentication server for other hosts. This +# requires that the integrated EAP authenticator is also enabled and both +# authentication services are sharing the same configuration. + +# File name of the RADIUS clients configuration for the RADIUS server. If this +# commented out, RADIUS server is disabled. +#radius_server_clients=/etc/hostapd/radius_clients + +# The UDP port number for the RADIUS authentication server +#radius_server_auth_port=1812 + + +##### WPA/IEEE 802.11i configuration ########################################## + +# Enable WPA. Setting this variable configures the AP to require WPA (either +# WPA-PSK or WPA-RADIUS/EAP based on other configuration). For WPA-PSK, either +# wpa_psk or wpa_passphrase must be set and wpa_key_mgmt must include WPA-PSK. +# For WPA-RADIUS/EAP, ieee8021x must be set (but without dynamic WEP keys), +# RADIUS authentication server must be configured, and WPA-EAP must be included +# in wpa_key_mgmt. +# This field is a bit field that can be used to enable WPA (IEEE 802.11i/D3.0) +# and/or WPA2 (full IEEE 802.11i/RSN): +# bit0 = WPA +# bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled) +wpa=1 + +# WPA pre-shared keys for WPA-PSK. This can be either entered as a 256-bit +# secret in hex format (64 hex digits), wpa_psk, or as an ASCII passphrase +# (8..63 characters) that will be converted to PSK. This conversion uses SSID +# so the PSK changes when ASCII passphrase is used and the SSID is changed. +# wpa_psk (dot11RSNAConfigPSKValue) +# wpa_passphrase (dot11RSNAConfigPSKPassPhrase) +#wpa_psk=0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef +wpa_passphrase=yoursecretpassphrase + +# Optionally, WPA PSKs can be read from a separate text file (containing list +# of (PSK,MAC address) pairs. This allows more than one PSK to be configured. +# Use absolute path name to make sure that the files can be read on SIGHUP +# configuration reloads. +#wpa_psk_file=/etc/hostapd/wpa_psk + +# Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The +# entries are separated with a space. +# (dot11RSNAConfigAuthenticationSuitesTable) +#wpa_key_mgmt=WPA-PSK WPA-EAP +wpa_key_mgmt=WPA-PSK + +# Set of accepted cipher suites (encryption algorithms) for pairwise keys +# (unicast packets). This is a space separated list of algorithms: + +# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] +# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] +# Group cipher suite (encryption algorithm for broadcast and multicast frames) +# is automatically selected based on this configuration. If only CCMP is +# allowed as the pairwise cipher, group cipher will also be CCMP. Otherwise, +# TKIP will be used as the group cipher. +# (dot11RSNAConfigPairwiseCiphersTable) +wpa_pairwise=TKIP CCMP + +# Time interval for rekeying GTK (broadcast/multicast encryption keys) in +# seconds. (dot11RSNAConfigGroupRekeyTime) +#wpa_group_rekey=600 + +# Rekey GTK when any STA that possesses the current GTK is leaving the BSS. +# (dot11RSNAConfigGroupRekeyStrict) +#wpa_strict_rekey=1 + +# Time interval for rekeying GMK (master key used internally to generate GTKs +# (in seconds). +#wpa_gmk_rekey=86400 + +# Enable IEEE 802.11i/RSN/WPA2 pre-authentication. This is used to speed up +# roaming be pre-authenticating IEEE 802.1X/EAP part of the full RSN +# authentication and key handshake before actually associating with a new AP. +# (dot11RSNAPreauthenticationEnabled) +#rsn_preauth=1 +# +# Space separated list of interfaces from which pre-authentication frames are +# accepted (e.g., 'eth0' or 'eth0 wlan0wds0'. This list should include all +# interface that are used for connections to other APs. This could include +# wired interfaces and WDS links. The normal wireless data interface towards +# associated stations (e.g., wlan0) should not be added, since +# pre-authentication is only used with APs other than the currently associated +# one. +#rsn_preauth_interfaces=eth0 diff --git a/config/rootfiles/packages/hostapd b/config/rootfiles/packages/hostapd new file mode 100644 index 0000000000..269ec23a94 --- /dev/null +++ b/config/rootfiles/packages/hostapd @@ -0,0 +1,2 @@ +usr/bin/hostapd +usr/bin/hostapd_cli diff --git a/config/rootfiles/packages/wpa_supplicant b/config/rootfiles/packages/wpa_supplicant new file mode 100644 index 0000000000..70931143d9 --- /dev/null +++ b/config/rootfiles/packages/wpa_supplicant @@ -0,0 +1,3 @@ +usr/sbin/wpa_cli +usr/sbin/wpa_passphrase +usr/sbin/wpa_supplicant diff --git a/lfs/hostapd b/lfs/hostapd new file mode 100644 index 0000000000..79360d6048 --- /dev/null +++ b/lfs/hostapd @@ -0,0 +1,86 @@ +############################################################################### +# # +# IPFire.org - A linux based firewall # +# Copyright (C) 2008 Michael Tremer & Christian Schmidt # +# # +# This program is free software: you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation, either version 3 of the License, or # +# (at your option) any later version. # +# # +# This program is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with this program. If not, see . # +# # +############################################################################### + +############################################################################### +# Definitions +############################################################################### + +include Config + +VER = 0.5.10 + +THISAPP = hostapd-$(VER) +DL_FILE = $(THISAPP).tar.gz +DL_FROM = $(URL_IPFIRE) +DIR_APP = $(DIR_SRC)/$(THISAPP) +TARGET = $(DIR_INFO)/$(THISAPP) +PROG = hostapd +PAK_VER = 1 + +DEPS = "wpa_supplicant" + +############################################################################### +# Top-level Rules +############################################################################### + +objects = $(DL_FILE) + +$(DL_FILE) = $(DL_FROM)/$(DL_FILE) + +$(DL_FILE)_MD5 = ed669d96346dfc7d9f9fad079731853f + +install : $(TARGET) + +check : $(patsubst %,$(DIR_CHK)/%,$(objects)) + +download :$(patsubst %,$(DIR_DL)/%,$(objects)) + +md5 : $(subst %,%_MD5,$(objects)) + +dist: + @$(PAK) + +############################################################################### +# Downloading, checking, md5sum +############################################################################### + +$(patsubst %,$(DIR_CHK)/%,$(objects)) : + @$(CHECK) + +$(patsubst %,$(DIR_DL)/%,$(objects)) : + @$(LOAD) + +$(subst %,%_MD5,$(objects)) : + @$(MD5) + +############################################################################### +# Installation Details +############################################################################### + +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) + @$(PREBUILD) + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) + cd $(DIR_SRC) && tar xzf $(DIR_DL)/madwifi-0.9.4.tar.gz + cd $(DIR_APP) && cp $(DIR_SRC)/config/hostapd/.config . + cd $(DIR_APP) && sed -e "s@/usr/local@/usr@g" -i Makefile + cd $(DIR_APP) && make && make install + @rm -rf $(DIR_APP) + @rm -rf $(DIR_SRC)/madwifi-0.9.4 + @$(POSTBUILD) diff --git a/lfs/madwifi b/lfs/madwifi new file mode 100644 index 0000000000..a568ca91d3 --- /dev/null +++ b/lfs/madwifi @@ -0,0 +1,88 @@ +############################################################################### +# # +# IPFire.org - A linux based firewall # +# Copyright (C) 2008 Michael Tremer & Christian Schmidt # +# # +# This program is free software: you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation, either version 3 of the License, or # +# (at your option) any later version. # +# # +# This program is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with this program. If not, see . # +# # +############################################################################### + +############################################################################### +# Definitions +############################################################################### + +include Config + +VER = 0.9.4 + +THISAPP = madwifi-$(VER) +DL_FILE = $(THISAPP).tar.gz +DL_FROM = $(URL_IPFIRE) +DIR_APP = $(DIR_SRC)/$(THISAPP) +ifeq "$(SMP)" "" + TARGET = $(DIR_INFO)/$(THISAPP)-wlan +else + TARGET = $(DIR_INFO)/$(THISAPP)-wlan-smp +endif + +############################################################################### +# Top-level Rules +############################################################################### + +objects = $(DL_FILE) + +$(DL_FILE) = $(DL_FROM)/$(DL_FILE) + +$(DL_FILE)_MD5 = 399d20de8d855a59f20058857c2178ad + +install : $(TARGET) + +check : $(patsubst %,$(DIR_CHK)/%,$(objects)) + +download :$(patsubst %,$(DIR_DL)/%,$(objects)) + +md5 : $(subst %,%_MD5,$(objects)) + +############################################################################### +# Downloading, checking, md5sum +############################################################################### + +$(patsubst %,$(DIR_CHK)/%,$(objects)) : + @$(CHECK) + +$(patsubst %,$(DIR_DL)/%,$(objects)) : + @$(LOAD) + +$(subst %,%_MD5,$(objects)) : + @$(MD5) + +############################################################################### +# Installation Details +############################################################################### + +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) + @$(PREBUILD) + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar xzf $(DIR_DL)/$(DL_FILE) + cd $(DIR_APP) && sed -i -e "s/\/sbin\/depmod -ae//" Makefile + cd $(DIR_APP) && sed -i -e "94,96d" Makefile + # workaround for build on lfs + ln -s $(DIR_APP)/net80211/if_ethersubr.h $(DIR_APP)/ath/if_ethersubr.h + ln -s $(DIR_APP)/net80211/if_media.h $(DIR_APP)/ath/if_media.h + ln -s $(DIR_APP)/net80211/if_llc.h $(DIR_APP)/ath/if_llc.h + cd $(DIR_APP) && make KERNELPATH=/usr/src/linux + cd $(DIR_APP) && make install KERNELPATH=/usr/src/linux +ifeq "$(SMP)" "1" + cp $(DIR_SRC)/config/madwifi/madwifi.conf /etc/ +endif + @$(POSTBUILD) diff --git a/lfs/wpa_supplicant b/lfs/wpa_supplicant new file mode 100644 index 0000000000..0a0fffc000 --- /dev/null +++ b/lfs/wpa_supplicant @@ -0,0 +1,83 @@ +############################################################################### +# # +# IPFire.org - A linux based firewall # +# Copyright (C) 2008 Michael Tremer & Christian Schmidt # +# # +# This program is free software: you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation, either version 3 of the License, or # +# (at your option) any later version. # +# # +# This program is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with this program. If not, see . # +# # +############################################################################### + +############################################################################### +# Definitions +############################################################################### + +include Config + +VER = 0.5.10 + +THISAPP = wpa_supplicant-$(VER) +DL_FILE = $(THISAPP).tar.gz +DL_FROM = $(URL_IPFIRE) +DIR_APP = $(DIR_SRC)/$(THISAPP) +TARGET = $(DIR_INFO)/$(THISAPP) +PROG = wpa_supplicant +PAK_VER = 1 + +############################################################################### +# Top-level Rules +############################################################################### + +objects = $(DL_FILE) + +$(DL_FILE) = $(DL_FROM)/$(DL_FILE) + +$(DL_FILE)_MD5 = 9e7b99da67c47d81121368c6d580d069 + +install : $(TARGET) + +check : $(patsubst %,$(DIR_CHK)/%,$(objects)) + +download :$(patsubst %,$(DIR_DL)/%,$(objects)) + +md5 : $(subst %,%_MD5,$(objects)) + +dist: + @$(PAK) + +############################################################################### +# Downloading, checking, md5sum +############################################################################### + +$(patsubst %,$(DIR_CHK)/%,$(objects)) : + @$(CHECK) + +$(patsubst %,$(DIR_DL)/%,$(objects)) : + @$(LOAD) + +$(subst %,%_MD5,$(objects)) : + @$(MD5) + +############################################################################### +# Installation Details +############################################################################### + +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) + @$(PREBUILD) + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) + cd $(DIR_APP) && cp $(DIR_SRC)/config/wpa_supplicant/.config . + cd $(DIR_APP) && sed -e "s/wpa_cli\ dynamic_eap_methods/wpa_cli\ #dynamic_eap_methods/" -i Makefile + cd $(DIR_APP) && sed -e "s@/usr/local@/usr@g" -i Makefile + cd $(DIR_APP) && make && make install + @rm -rf $(DIR_APP) + @$(POSTBUILD) diff --git a/make.sh b/make.sh index 82eb065ec7..7a17883749 100755 --- a/make.sh +++ b/make.sh @@ -22,13 +22,13 @@ ############################################################################ # -NAME="IPFire" # Software name -SNAME="ipfire" # Short name -VERSION="2.1" # Version number -SLOGAN="www.ipfire.org" # Software slogan -CONFIG_ROOT=/var/ipfire # Configuration rootdir -NICE=10 # Nice level -MAX_RETRIES=1 # prefetch/check loop +NAME="IPFire" # Software name +SNAME="ipfire" # Short name +VERSION="2.1" # Version number +SLOGAN="www.ipfire.org" # Software slogan +CONFIG_ROOT=/var/ipfire # Configuration rootdir +NICE=10 # Nice level +MAX_RETRIES=1 # prefetch/check loop KVER=`grep --max-count=1 VER lfs/linux | awk '{ print $3 }'` MACHINE=`uname -m` @@ -353,6 +353,7 @@ buildipfire() { ipfiremake kqemu ipfiremake sane KMOD=1 ipfiremake linux-fusion + ipfiremake madwifi ipfiremake pkg-config ipfiremake linux-atm ipfiremake cpio @@ -575,6 +576,8 @@ buildipfire() { ipfiremake git ipfiremake squidclamav ipfiremake bc + ipfiremake wpa_supplicant + ipfiremake hostapd } buildinstaller() {