From 4bf0d575277842efbadc5255b6c1a67fd49477ba Mon Sep 17 00:00:00 2001 From: Arne Fitzenreiter Date: Fri, 20 Feb 2015 16:52:53 +0100 Subject: [PATCH] remove not working wandboad wlan nvram files. --- .../lib/firmware/brcm/brcmfmac4329-sdio.txt | 68 ---------- .../lib/firmware/brcm/brcmfmac4330-sdio.txt | 122 ------------------ config/rootfiles/common/stage2 | 2 - .../core/87/filelists/updated-firmwares | 2 - 4 files changed, 194 deletions(-) delete mode 100644 config/lib/firmware/brcm/brcmfmac4329-sdio.txt delete mode 100644 config/lib/firmware/brcm/brcmfmac4330-sdio.txt diff --git a/config/lib/firmware/brcm/brcmfmac4329-sdio.txt b/config/lib/firmware/brcm/brcmfmac4329-sdio.txt deleted file mode 100644 index 3832006602..0000000000 --- a/config/lib/firmware/brcm/brcmfmac4329-sdio.txt +++ /dev/null @@ -1,68 +0,0 @@ -# bcm4329 NVRAM file for Wandboard Dual - -sromrev=3 -vendid=0x14e4 -devid=0x432f -boardtype=0x53e - -boardrev=0x41 - -#boardflags=0x1200 -boardflags=0x200 - -# Specify the xtalfreq if it is otherthan 38.4MHz -xtalfreq=37400 - -aa2g=3 -aa5g=0 - -ag0=255 -#tri2g=0x64 - -# 11g paparams -pa0b0=5542,5542,5542 -pa0b1=64244,64244,64244 -pa0b2=65202,65202,65202 - -pa0itssit=62 -pa0maxpwr=74 -opo=0 -mcs2gpo0=0x6666 -mcs2gpo1=0x6666 - -# 11g rssi params -rssismf2g=0xa,0xa,0xa -rssismc2g=0xb,0xb,0xb -rssisav2g=0x3,0x3,0x3 -bxa2g=0 - -# country code -ccode=ALL -cctl=0x0 -cckdigfilttype=0 -ofdmdigfilttype=1 - -rxpo2g=0 - -boardnum=1 -macaddr=DE:AD:BE:EF:00:00 - -# xtal pu and pd time control variable -# pu time is driver default (0x1501) -#r13t=0x1501 - -####### -nocrc=1 - -#for mfgc -otpimagesize=182 - -# sdio extra configs -hwhdr=0x05ffff031030031003100000 - -#This generates empty F1, F2 and F3 tuple chains, and may be used if the host SDIO stack does not require the standard tuples. -#RAW1=80 02 fe ff - -#This includes the standard FUNCID and FUNCE tuples in the F1, F2, F3 and common CIS. -RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A -nvramver=4.218.214.0 diff --git a/config/lib/firmware/brcm/brcmfmac4330-sdio.txt b/config/lib/firmware/brcm/brcmfmac4330-sdio.txt deleted file mode 100644 index c5c2611948..0000000000 --- a/config/lib/firmware/brcm/brcmfmac4330-sdio.txt +++ /dev/null @@ -1,122 +0,0 @@ -# bcm4330 NVRAM file for Wandboard Quad - -manfid=0x2d0 -prodid=0x0532 -vendid=0x14e4 -devid=0x4360 -boardtype=0x0532 -boardrev=0x20 -boardflags=0x10080201 - -nocrc=1 -xtalfreq=37400 -xtalmode=0x20,0x4,0 -boardnum=22 -macaddr=DE:AD:BE:EF:00:00 -ag0=252 -ag1=252 -aa2g=1 -aa5g=1 -ccode=EU -regrev=5 - -#for BT-coexistence -btc_params80=0 -btc_params6=10 -btc_params8=10000 - -sd_gpout=0 -# sd_oobonly=1 -muxenab=0x10 - -# 2G PA param_B42R 110927 -pa0b0=0x12E4 -pa0b1=0xFE09 -pa0b2=0xFF9A -#pa0itssit=62 -rssismf2g=0xa -rssismc2g=0x3 -rssisav2g=0x7 - -# rssi params for 5GHz B42R_110803 -#rssismf5g=0x4 -rssismf5g=0xa -rssismc5g=0x7 -rssisav5g=0x1 -#PA parameters for lower band -pa1lob0=0x144F -pa1lob1=0xFD6B -pa1lob2=0xFF3B -#PA parameters for midband -pa1b0=0x139C -pa1b1=0xFD87 -pa1b2=0xFF4F -#PA parameters for high band -pa1hib0=0x12CA -pa1hib1=0xFD9A -pa1hib2=0xFF4E - -# 2G PA offset -maxp2ga0=64 -sromrev=3 -cckpo=0 -ofdm2gpo=0x66666666 -mcs2gpo0=0xaaaa -mcs2gpo1=0xaaaa - -# 5G PA offset -maxp5ga0=66 -maxp5gla0=66 -maxp5gha0=66 -ofdm5gpo=0x22222222 -ofdm5glpo=0x11111111 -ofdm5ghpo=0x22222222 -mcs5gpo0=0x6666 -mcs5gpo1=0x6666 -mcs5glpo0=0x5555 -mcs5glpo1=0x5555 -mcs5ghpo0=0x6666 -mcs5ghpo1=0x6666 - -cckPwrOffset=4 -cckdigfilttype=22 -ofdmdigfilttype=2 -extpagain5g=2 -#wl0id=0x431b - -# For 2GHz Tx EVM/SM -rfreg033=0x19 -rfreg033_cck=0x1d -pacalidx2g=65 -dacrate2g=160 -txalpfbyp2g=1 -bphyscale=17 - -# 5GHz LOFT and IQ CAL -txgaintbl5g=1 -txiqlopapu5g=1 -txiqlopag5g=0x10 -iqlocalidx5g=24 - -# 5GHz Noise CAL parameter -noise_cal_po_5g=5 -noise_cal_enable_5g=0 - -# 2GHz RxPER at low rates -noise_cal_ref_2g=56 -noise_cal_po_bias_2g=-4 -noise_cal_enable_2g=1 - -# Max input level on a-band -triso5g=9 - -# Tx power control, especially temp. -tssitime=1 - -#fc+1.7GHz Spur Elimination -loidacmode5g=1 - -swctrlmap_2g=0x84048404, 0x82028202, 0x84048404, 0x010202, 0x1ff -swctrlmap_5g=0xC040C040, 0xB030A020, 0xA020C040, 0x010A02, 0x2F8 - - diff --git a/config/rootfiles/common/stage2 b/config/rootfiles/common/stage2 index 663aef57ae..44f24b4369 100644 --- a/config/rootfiles/common/stage2 +++ b/config/rootfiles/common/stage2 @@ -48,8 +48,6 @@ home/nobody #lib #lib/firmware #lib/firmware/brcm -lib/firmware/brcm/brcmfmac4329-sdio.txt -lib/firmware/brcm/brcmfmac4330-sdio.txt lib/firmware/brcm/brcmfmac43362-sdio.txt #media media/cdrom diff --git a/config/rootfiles/core/87/filelists/updated-firmwares b/config/rootfiles/core/87/filelists/updated-firmwares index f923b15d1c..172312f33f 100644 --- a/config/rootfiles/core/87/filelists/updated-firmwares +++ b/config/rootfiles/core/87/filelists/updated-firmwares @@ -200,6 +200,4 @@ lib/firmware/ti-connectivity/wl18xx-fw-3.bin lib/firmware/ti-connectivity/wl18xx-fw-4.bin lib/firmware/v4l-cx23885-enc-broken.fw lib/firmware/WHENCE -lib/firmware/brcm/brcmfmac4329-sdio.txt -lib/firmware/brcm/brcmfmac4330-sdio.txt lib/firmware/brcm/brcmfmac43362-sdio.txt -- 2.39.2