Set default FirewallEngine to "none".

[people/stevee/guardian.git] / guardian

#!/usr/bin/perl
###############################################################################
#                                                                             #
# IPFire.org - A linux based firewall                                         #
# Copyright (C) 2015  IPFire Development Team                                 #
#                                                                             #
# This program is free software: you can redistribute it and/or modify        #
# it under the terms of the GNU General Public License as published by        #
# the Free Software Foundation, either version 3 of the License, or           #
# (at your option) any later version.                                         #
#                                                                             #
# This program is distributed in the hope that it will be useful,             #
# but WITHOUT ANY WARRANTY; without even the implied warranty of              #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the               #
# GNU General Public License for more details.                                #
#                                                                             #
# You should have received a copy of the GNU General Public License           #
# along with this program.  If not, see <http://www.gnu.org/licenses/>.       #
#                                                                             #
###############################################################################

use strict;
use threads;
use threads::shared;
use Getopt::Long;
use Thread::Queue;
use Linux::Inotify2;
use Time::HiRes qw[ time sleep ];

require Guardian::Base;
require Guardian::Config;
require Guardian::Daemon;
require Guardian::Events;
require Guardian::Logger;
require Guardian::Parser;
require Guardian::Socket;

use warnings;

# Disable warnings of unjoinded threads when stopping guardian.
no warnings 'threads';

# Define version.
my $version ="2.0";

# Get and store the given command line arguments in a hash.
my %cmdargs = ();

&GetOptions (\%cmdargs,
	'foreground|f',
	'config|c=s',
	'help|h',
	'version|v',
);

# Show help / version information.
if (defined($cmdargs{"help"})) {
	print "Guardian $version \n";
	print "Usage: guardian <optional arguments>\n";
	print " -c, --config\t\tspecifiy a configuration file other than the default (/etc/guardian/guardian.conf)\n";
	print " -f, --foreground\trun in the foreground (doesn't fork, any output goes to STDOUT)\n";
	print " -h, --help\t\tshows this help\n";
	print " -v, --version\t\tdisplay programm version and exit.\n";
	exit;
} elsif (defined($cmdargs{"version"})) {
	print "Guardian $version \n";
	exit;
}

# Check if another instance of guardian is allready running.
if (&Guardian::Daemon::IsRunning()) {
	die "Another instance of Guardian is allready running...\n";
}

# Read-in the configuration file and store the settings.
# Push the may be given config file argument.
my %mainsettings = &Guardian::Config::UseConfig($cmdargs{"config"});

# Initialize Logger.
my $logger = Guardian::Logger->Init(%mainsettings);
$logger->Log("debug", "Logger successfully initialized...");

# Add the logger object to the mainsettings for passing
# it to the modules.
$mainsettings{Logger} = $logger;

# Redirect perls "die" messages to the logger before exiting.
$SIG{__DIE__} = sub { $logger->Log("err", "@_"); };

# Initialize the event handler.
my $events = Guardian::Events->Init(%mainsettings);

# Shared hash between the main process and all threads. It will store all
# monitored files and their current file position.
my %monitored_files :shared = ();

# Create the main queue. It is used to store and process all events which are
# reported and enqueued by the worker threads.
my $queue :shared = new Thread::Queue or die "Could not create new, empty queue. $!";;

# Array to store all currently running worker objects.
# (Does not include the socket thread)
my @running_workers;

# Check if guardian should be daemonized or keep in the foreground.
unless (defined($cmdargs{"foreground"})) {
	# Fork into background.
	&Guardian::Daemon::Daemonize();
} else {
	# Write PID (process-id).
	&Guardian::Daemon::WritePID();
}

# Call Init function to initzialize guardian.
&Init();

# Infinite main loop, which processes all queued events.
while(1) {
	# Get the amount of elements in our queue.
	# "undef" will be returned if it is empty.
	my $current_events = $queue->pending();

	# If there is at least one element enqued
	if($current_events > 0) {
		# Grab the data of the top enqueued event.
		my $event = $queue->peek();

		# Log processed event.
		$logger->Log("debug", "QUEUE - Processed event: $event");

		# Send event data to the events parser to determine
		# if any action is required.
		$events->CheckAction($event);

		# Drop processed event from queue.
		$queue->dequeue();
	}

	# Call RemoveBlocks routine from the Events module to check
	# if items from the block list can be dropped.
	$events->RemoveBlocks();

	# Sleep 10ms to reduce the load of the main process.
	sleep(0.01);
}

#
## Init function.
#
## This function contains code which has to be executed while guardian
## is starting.
#
sub Init () {
	# Setup signal handler.
	&SignalHandler();

	# Setup IPC mechanism via Socket in an own thread.
	threads->create(\&Socket);

	# Generate hash of monitored files.
	%monitored_files = &Guardian::Base::GenerateMonitoredFiles(\%mainsettings, \%monitored_files);

	# Start worker threads.
	&StartWorkers();
}

#
## Worker function.
#
## This function is responsible for monitoring modifications of the given logfile,
## read them and pass them to the message parser.
#
## To get file modifications the inotify subsystem of the linux kernel is used.
#
## In order to prevent from permanently read and keep files opened, or dealing
## with huge logfiles, at initialization time of the worker process, the file will
## be opened once and the cursor position of the end of file (EOF) get stored. When
## reading any newly added lines from the file, we directly can jump to the last
## known position and get these lines. Afterwards, we store the current curser position
## again, so we can do it in this way over and over again.
#
## All read lines get stored in an array, which will be passed to the Parser.
#
## If any response (action) from the parser get recieved, it will be put into the
## shared event queue.
#
sub Worker ($) {
	my $file = $_[0];

	# Signal handler to kill worker.
	$SIG{'KILL'} = sub { threads->exit(); };

	# Create inotify watcher.
	my $watcher = new Linux::Inotify2 or die "Could not use inotify. $!";

	# Monitor the specified file.
	$watcher->watch("$file", IN_MODIFY) or die "Could not monitor $file. $!";

	# Switch watcher into non-blocking mode.
	$watcher->blocking(0);

	# Log successfully spawned worker.
	$logger->Log("debug", "Spawned worker thread for: $file");

	# Infinite loop.
	while(1) {
		# Check for any events and perform them, if there
		# is a least one.
		if ($watcher->read) {
			my @message = ();

			# Obtain fileposition from hash.
			my $fileposition = $monitored_files{$file};

			# Open the file.
			open (FILE, $file) or die "Could not open $file. $!";

			# Seek to the last known position.
			seek (FILE, $fileposition, 0);

			# Get the log message.
			while (my $line = <FILE>) {
				# Remove any newlines.
				chomp $line;

				# Add all lines to the message array.
				push (@message, $line);
			}

			{
				# Lock shared hash.
				lock(%monitored_files);

				# Update fileposition.
				$monitored_files{$file} = tell(FILE);
			}

			# Close file.
			close(FILE);

			# Send filename and message to the parser,
			# which will return if an action has to be performed.
			my @action = &Guardian::Parser::Parser("$file", @message);

			# Send the action to the main process and put it into
			# the queue.
			if (@action) {
				# Lock the queue.
				lock($queue);

				# Put the required action into the queue.
				$queue->enqueue(@action);
			}
		} else {
			# Sleep for 10ms until the next round of the loop will start.
			sleep(0.01);
		}
	}
}

#
## Socket function.
#
## This function uses the Socket module to create and listen to an UNIX socket.
## It automatically accepts all incomming connections and pass the recieved
## data messages to the the Message_Parser function which is also part of the
## socket module.
#
## If a valid command has been sent through the socket, the corresponding event
## will be enqueued into the shared event queue.
#
sub Socket () {
	# Create the Server socket by calling the responsible function.
	my $server = &Guardian::Socket::Server();

	# Log successfull creation of socket.
	$logger->Log("debug", "Listening to Socket...");

        # Accept incomming connections from the socket.
        while (my $connection = $server->accept()) {
		# Autoflush the socket after the data
		# has been recieved.
		$connection->autoflush(1);

		# Gather all data from the connection.
		while (my $message = <$connection>) {
			# Remove any newlines.
			chomp($message);

			# Log recieved socket command.
			$logger->Log("debug", "Socket - Recieved message: $message");

			# Send the recieved data message to the
			# socket parser.
			my $action = &Guardian::Socket::Message_Parser($message);

			# If the parser returns to perform an action,
			# add it to the main event queue.
			if ($action) {
				# Lock the queue.
				lock($queue);

				# Enqueue the returned action.
				$queue->enqueue($action);
			}
		}
	}
}

#
## Function for capturing process signals.
#
## This function captures any sent process signals and will call various
## actions, basend on the captured signal.
#
sub SignalHandler {
	$SIG{INT} = \&Shutdown;
	$SIG{TERM} = \&Shutdown;
	$SIG{QUIT} = \&Shutdown;
	$SIG{HUP} = \&Reload;
}

#
## Function to start the workers (threads) for all monitored files.
#
## This function will loop through the hash of monitored files and will
## spawn an own thread based worker for each file. Every created worker will
## be added to the array of running workers.
#
sub StartWorkers () {
	# Loop through the hash which contains the monitored files and start
	# a worker thread for each single one.
	foreach my $file (keys %monitored_files) {
		$logger->Log("debug", "Starting worker thread for $file");
		# Create worker thread for the file.
		push @running_workers, threads->create(\&Worker,$file);
	}
}

#
## Function to stop all running workers.
#
## This function is used to stop all currently running workers and will be
## called when reloading or shutting down guardian.
#
sub StopWorkers () {
	# Loop through all running workers.
	foreach my $worker (@running_workers) {
		# Send the worker the "KILL" signal and detach the
		# thread so perl can do an automatically clean-up.
		$worker->kill('KILL');
	}
	$logger->Log("debug", "All workers are stopped now...");
}

#
## Reload function.
#
## This function will get called if the signal handler recieves a "SIGHUP" signal,
## or the reload command will be sent via socket connection. It is responsible for
## reloading all configure options and stopping/starting the worker threads.
#
sub Reload () {
	# Log reload.
	$logger->Log("info", "Reload configuration...");

	# Stop all running workers.
	&StopWorkers();

	# Re-read configuration file.
	%mainsettings = &Guardian::Config::UseConfig($cmdargs{"config"});

	# Update Logger settings.
	$logger = Guardian::Logger->Init(%mainsettings);

	# Update logger object in mainsettings hash.
	$mainsettings{Logger} = $logger;

	# Re-generate hash of monitored files.
	%monitored_files = &Guardian::Base::GenerateMonitoredFiles(\%mainsettings, \%monitored_files);

	# Restart the worker threads.
	&StartWorkers();
}

#
## Shutdown function.
#
## This function is used to do a clean shutdown of guardian. It will be called
## by the signal handler when recieving INT (2), QUIT (3) and TERM (15) signals.
#
sub Shutdown () {
	# Log shutdown.
	$logger->Log("info", "Shutting down...");

	# Stop all workers.
	&StopWorkers();

	# Remove socket file on exit.
	&Guardian::Socket::RemoveSocketFile();

	# Remove pid file on exit.
	&Guardian::Daemon::RemovePIDFile();

	# Sleep for one second to give perl some
	# time to proper clean up everything before
	# exiting.
	sleep(1);

	# Log good bye message.
	$logger->Log("debug", "Good Bye!");

	# Exit guardian.
	exit;
}