'fwdfw delete' => 'Delete',
'fwdfw dnat' => 'Destination NAT (Port forwarding)',
'fwdfw dnat error' => 'You have to select a single host for DNAT. Groups or networks are not allowed.',
+'fwdfw dnat extport' => 'The external port has to be empty when using Source NAT rules.',
+'fwdfw dnat nochoice' => 'Please pick Source NAT or Destination NAT from the NAT section.',
'fwdfw dnat porterr' => 'You have to select a single port or portrange (tcp/udp) for NAT',
'fwdfw dnat porterr2' => 'Cannot use external port (NAT) when no destination port is defined.',
'fwdfw edit' => 'Edit',
'fwdfw from' => 'From:',
'fwdfw hint ip1' => 'The last generated rule may never match, because source and destination subnets may overlap.',
'fwdfw hint ip2' => 'Please double-check if this rule makes sense: ',
+'fwdfw hint mac' => 'The targetgroup contains MAC addresses which will be skipped during rulecreation.',
'fwdfw iface' => 'Interface',
'fwdfw ipsec network' => 'IPsec networks:',
'fwdfw log' => 'Log',
'fwdfw sourceip' => 'Source address (MAC/IP address or network):',
'fwdfw std network' => 'Standard networks:',
'fwdfw target' => 'Destination',
-'fwdfw targetip' => 'Destination address (MAC/IP address or network):',
+'fwdfw targetip' => 'Destination address (IP address or network):',
'fwdfw till' => 'Until:',
'fwdfw time' => 'Time Constraints',
'fwdfw timeframe' => 'Use time constraints',
'ipinfo' => 'IP info',
'ipsec' => 'IPsec',
'ipsec network' => 'IPsec network',
+'ipsec no connections' => 'No active IPsec connections',
'iptable rules' => 'IPTable rules',
'iptmangles' => 'IPTable Mangles',
'iptnats' => 'IPTable Network Address Translation',
'mac address saved txt' => 'The MAC address has been successfully saved, but changes will only take effect after reboot or reconnection.',
'mac address title' => 'Assign MAC Address',
'mac desc' => 'Here you are able to change the MAC address on red0. The address must be entered in hexadecimal (0-9,a-f), a valid entry is <br />e.g. 00-01-02-0e-b8-d6 or 00:01:02:0e:b8:d6.',
+'mac filter' => 'MAC filter',
'mac new' => 'new MAC address:',
'mac1 new' => 'new MAC address 1 (vdsl-inet):',
'mac2 new' => 'new MAC address 2 (vdsl-iptv):',
'ovpn errmsg green already pushed' => 'Route for green network is always set',
'ovpn errmsg invalid ip or mask' => 'Invalid network-address or subnetmask',
'ovpn log' => 'OVPN-Log',
+'ovpn mgmt in root range' => 'A port number of 1024 or higher is required.',
'ovpn mtu-disc' => 'Path MTU Discovery',
'ovpn mtu-disc and mtu not 1500' => 'Path MTU Discovery requires a MTU of 1500.',
'ovpn mtu-disc maybe' => 'Optionally',
'ovpn mtu-disc off' => 'Disabled',
'ovpn mtu-disc with mssfix or fragment' => 'Path MTU Discovery cannot be used with mssfix or fragment.',
'ovpn mtu-disc yes' => 'Forced',
+'ovpn no connections' => 'No active OpenVPN connections',
'ovpn on blue' => 'OpenVPN on BLUE',
'ovpn on orange' => 'OpenVPN on ORANGE',
'ovpn on red' => 'OpenVPN on RED',
-'ovpn mgmt in root range' => 'A port number of 1024 or higher is required.',
'ovpn port in root range' => 'A port number of 1024 or higher is required.',
'ovpn routes push' => 'Routes (one per line) e.g. 192.168.10.0/255.255.255.0 192.168.20.0/24',
'ovpn routes push options' => 'Route push options',
'wireless config changed' => 'Wireless config changed',
'wireless configuration' => 'Wireless Configuration',
'wlan client' => 'Wireless client',
+'wlan clients' => 'Wireless clients',
'wlan client advanced settings' => 'Advanced settings',
'wlan client and' => 'and',
'wlan client bssid' => 'BSSID',