'Level7 Rule' => 'Level7-Rule',
'Level7 rule' => 'Level7 rule',
'Local VPN IP' => 'Internal Network (GREEN):',
+'MB read' => 'MB read',
+'MB written' => 'MB written',
'MTU' => 'MTU size:',
'Number of IPs for the pie chart' => 'Number of IPs for the pie chart',
'Number of Ports for the pie chart' => 'Number of ports for the pie chart',
'advproxy banned mac clients' => 'Banned MAC addresses (one per line)',
'advproxy cache management' => 'Cache management',
'advproxy cache replacement policy' => 'Cache replacement policy',
+'advproxy cache-digest' => 'Enable Cache-Digest Generation',
'advproxy chgwebpwd ERROR' => 'E R R O R :',
'advproxy chgwebpwd SUCCESS' => 'S U C C E S S :',
'advproxy chgwebpwd change password' => 'Change password',
'behind a proxy' => 'Behind a proxy:',
'bewan adsl pci st' => 'TO BE REMOVED',
'bewan adsl usb' => 'TO BE REMOVED',
+'bit' => 'Bit',
'bitrate' => 'Bitrate',
'bleeding rules' => 'Bleeding Edge Snort Rules',
'blue' => 'BLUE',
'ccd err invalidnet' => 'Invalid IP address. Format: 192.168.0.0/24 or 192.168.0.0/255.255.255.0.',
'ccd err iroute' => 'Network address for route is invalid.',
'ccd err irouteexist' => 'This route is already in use.',
-'ccd err isipsecnet' => 'The given subnet address already used by an IPsec network.',
-'ccd err isovpnnet' => 'Subnet address already in use for OpenVPN Server.',
+'ccd err isipsecnet' => 'The given subnet address is already used by an IPsec network.',
+'ccd err isipsecrw' => 'The given subnet address is already used by the IPsec rw network.',
+'ccd err isovpnn2n' => 'The subnet address is already in use for an OpenVPN net-to-net connection.',
+'ccd err isovpnnet' => 'The subnet address is already in use for the OpenVPN server.',
'ccd err issubnet' => 'Subnet address already in use.',
'ccd err name' => 'Please choose a name.',
'ccd err nameexist' => 'Name already exists.',
'could not open installed updates file' => 'Could not open installed updates file',
'could not open update information file' => 'Could not open update information file. The update file is corrupt.',
'could not retrieve common name from certificate' => 'Could not retrieve common name from certificate.',
+'count' => 'Count',
+'countries' => 'Countries',
'country' => 'Country',
+'country codes and flags' => 'Country Codes and Flags:',
+'countrycode' => 'Code',
'cpu frequency per' => 'CPU frequency per',
'cpu idle usage' => 'Idle CPU Usage',
'cpu interrupt usage' => 'Interrupt CPU Usage',
'destination port numbers' => 'Destination port must be a valid port number or port range.',
'destination port overlaps' => 'Destination port range overlaps an existing port range.',
'detail level' => 'Detail level',
+'details' => 'Details',
'device' => 'Device',
'devices on blue' => 'Devices on BLUE',
'dhcp advopt add' => 'Add a DHCP option',
'dmz pinhole rule added' => 'DMZ pinhole rule added; restarting DMZ pinhole',
'dmz pinhole rule removed' => 'DMZ pinhole rule removed; restarting DMZ pinhole',
'dmzpinholes for same net not necessary' => 'DMZ Pinholes are not necessary for same net. Select different source or destination net.',
-'dnat address' => 'External IP address',
+'dnat address' => 'Firewall Interface',
'dns address deleted' => 'Successfully deleted!',
'dns address deleted txt' => 'The DNS-Server addresses have been successfully deleted.<br />You have to reboot or reconnect that the changes have effect!',
'dns address done' => 'The DNS-Server address settings are going to be saved.',
'dns saved' => 'Successfully saved!',
'dns saved txt' => 'The two entered DNS server addresses have been saved successfully.<br />You have to reboot or reconnect that the changes have effect!',
'dns server' => 'DNS Server',
+'dns servers' => 'DNS Servers',
'dns title' => 'Domain Name System',
'dnsforward' => 'DNS Forwarding',
'dnsforward add a new entry' => 'Add a new entry',
'done' => 'Do it',
'dos charset' => 'DOS Charset',
'down and up speed' => 'Enter your Down- and Uplink-Speed <br /> and then press <i>Save</i>.',
+'downlink' => 'Downlink',
'downlink speed' => 'Downlink speed (kbit/sec)',
'downlink std class' => 'downlink standard class',
'download' => 'download',
'end address' => 'End address:',
'enter ack class' => 'Enter the ACK- Class <br /> and then press <i>Save</i>.',
'enter data' => 'Enter your settings <br /> and then press <i>Save</i>.',
+'entropy' => 'Entropy',
+'entropy graphs' => 'Entropy Graphs',
'err bk 1' => 'Error creating archive',
'err bk 10 password' => 'Error with backup password',
'err bk 2 key' => 'Error creating key file',
'firewallhits' => 'firewallhits',
'firmware' => 'Firmware',
'firmware upload' => 'Upload Firmware/Drivers',
+'first' => 'First',
'fixed ip lease added' => 'Fixed IP lease added',
'fixed ip lease modified' => 'Fixed IP lease modified',
'fixed ip lease removed' => 'Fixed IP lease removed',
+'flag' => 'Flag',
'force update' => 'Force update',
'force user' => 'force all new file to user',
'forward firewall' => 'Firewall',
'fwdfw delete' => 'Delete',
'fwdfw dnat' => 'Destination NAT (Port forwarding)',
'fwdfw dnat error' => 'You have to select a single host for DNAT. Groups or networks are not allowed.',
+'fwdfw dnat extport' => 'The external port has to be empty when using Source NAT rules.',
+'fwdfw dnat nochoice' => 'Please pick Source NAT or Destination NAT from the NAT section.',
'fwdfw dnat porterr' => 'You have to select a single port or portrange (tcp/udp) for NAT',
'fwdfw dnat porterr2' => 'Cannot use external port (NAT) when no destination port is defined.',
'fwdfw edit' => 'Edit',
'fwdfw from' => 'From:',
'fwdfw hint ip1' => 'The last generated rule may never match, because source and destination subnets may overlap.',
'fwdfw hint ip2' => 'Please double-check if this rule makes sense: ',
+'fwdfw hint mac' => 'The destination group contains MAC addresses, which will be skipped during rule creation.',
'fwdfw iface' => 'Interface',
'fwdfw ipsec network' => 'IPsec networks:',
'fwdfw log' => 'Log',
'fwdfw sourceip' => 'Source address (MAC/IP address or network):',
'fwdfw std network' => 'Standard networks:',
'fwdfw target' => 'Destination',
-'fwdfw targetip' => 'Destination address (MAC/IP address or network):',
+'fwdfw targetip' => 'Destination address (IP address or network):',
'fwdfw till' => 'Until:',
'fwdfw time' => 'Time Constraints',
'fwdfw timeframe' => 'Use time constraints',
'fwdfw use srcport' => 'Source port:',
'fwdfw use srv' => 'Destination port:',
'fwdfw useless rule' => 'This rule is useless.',
+'fwdfw warn1' => 'This might lead to firewallrules which are applied to networks for which they are not intended to be.',
'fwdfw wd_fri' => 'Fri',
'fwdfw wd_mon' => 'Mon',
'fwdfw wd_sat' => 'Sat',
'harddisk temperature' => 'Harddisk Temperature',
'harddisk temperature graphs' => 'HDD Graphs',
'hardware graphs' => 'Hardware Graphs',
+'hardware support' => 'Hardware Support',
'hdd temperature in' => 'Harddisk temperature in',
'help' => 'Help',
'high' => 'High',
'ipinfo' => 'IP info',
'ipsec' => 'IPsec',
'ipsec network' => 'IPsec network',
+'ipsec no connections' => 'No active IPsec connections',
'iptable rules' => 'IPTable rules',
'iptmangles' => 'IPTable Mangles',
'iptnats' => 'IPTable Network Address Translation',
'lan' => 'LAN',
'lang' => 'en',
'languagepurpose' => 'Select the language you wish IPFire to display in:',
+'last' => 'Last',
'last activity' => 'Last Activity',
'lateprompting' => 'Lateprompting',
'lease expires' => 'Lease expires',
'mac address saved txt' => 'The MAC address has been successfully saved, but changes will only take effect after reboot or reconnection.',
'mac address title' => 'Assign MAC Address',
'mac desc' => 'Here you are able to change the MAC address on red0. The address must be entered in hexadecimal (0-9,a-f), a valid entry is <br />e.g. 00-01-02-0e-b8-d6 or 00:01:02:0e:b8:d6.',
+'mac filter' => 'MAC filter',
'mac new' => 'new MAC address:',
'mac1 new' => 'new MAC address 1 (vdsl-inet):',
'mac2 new' => 'new MAC address 2 (vdsl-iptv):',
'max size' => 'Max object size (KB):',
'max throughput' => 'Maximum throughput',
'maximal' => 'Maximal',
+'maximum' => 'Maximum',
'maximum retries' => 'Maximum retries:',
'may' => 'May',
'mbmon display' => 'Display',
'min delay' => 'Minimum delay',
'min size' => 'Min object size (KB):',
'minimal' => 'Minimal',
+'minimum' => 'Minimum',
'minute' => 'Minute',
'minutes' => 'Minutes',
'misc-options' => 'Miscellaneous options',
'no eciadsl synch.bin file' => 'No ECI ADSL synch.bin file. Please upload.',
'no filter pass' => 'Enter the standard class for non-filtered packets.',
'no fritzdsl driver' => 'No Fritz!DSL driver. Please upload.',
+'no hardware random number generator' => 'This system has no source for entropy.',
'no information available' => 'No information available.',
'no log selected' => 'No log selected',
'no modem selected' => 'No modem selected',
'ovpn errmsg green already pushed' => 'Route for green network is always set',
'ovpn errmsg invalid ip or mask' => 'Invalid network-address or subnetmask',
'ovpn log' => 'OVPN-Log',
+'ovpn mgmt in root range' => 'A port number of 1024 or higher is required.',
'ovpn mtu-disc' => 'Path MTU Discovery',
'ovpn mtu-disc and mtu not 1500' => 'Path MTU Discovery requires a MTU of 1500.',
'ovpn mtu-disc maybe' => 'Optionally',
'ovpn mtu-disc off' => 'Disabled',
'ovpn mtu-disc with mssfix or fragment' => 'Path MTU Discovery cannot be used with mssfix or fragment.',
'ovpn mtu-disc yes' => 'Forced',
+'ovpn no connections' => 'No active OpenVPN connections',
'ovpn on blue' => 'OpenVPN on BLUE',
'ovpn on orange' => 'OpenVPN on ORANGE',
'ovpn on red' => 'OpenVPN on RED',
-'ovpn mgmt in root range' => 'A port number of 1024 or higher is required.',
'ovpn port in root range' => 'A port number of 1024 or higher is required.',
'ovpn routes push' => 'Routes (one per line) e.g. 192.168.10.0/255.255.255.0 192.168.20.0/24',
'ovpn routes push options' => 'Route push options',
'swap usage per' => 'Swap usage per',
'system' => 'System',
'system graphs' => 'System Graphs',
+'system has hwrng' => 'This system has got a hardware random number generator.',
+'system has rdrand' => 'This system has got support for Intel(R) RDRAND.',
'system information' => 'System Information',
'system log viewer' => 'System Log Viewer',
'system logs' => 'System Logs',
'updxlrtr weekly' => 'weekly',
'updxlrtr year' => 'one year',
'upgrade' => 'upgrade',
+'uplink' => 'Uplink',
'uplink speed' => 'Uplink speed (kbit/sec)',
'uplink std class' => 'uplink standard class',
'upload' => 'Upload',
'wlan client wpa mode ccmp ccmp' => 'CCMP-CCMP',
'wlan client wpa mode ccmp tkip' => 'CCMP-TKIP',
'wlan client wpa mode tkip tkip' => 'TKIP-TKIP',
+'wlan clients' => 'Wireless clients',
'wlanap access point' => 'Access Point',
'wlanap channel' => 'Channel',
'wlanap country' => 'Country Code',
projects / people / teissler / ipfire-2.x.git / blobdiff