'advproxy banned mac clients' => 'Banned MAC addresses (one per line)',
'advproxy cache management' => 'Cache management',
'advproxy cache replacement policy' => 'Cache replacement policy',
+'advproxy cache-digest' => 'Enable Cache-Digest Generation',
'advproxy chgwebpwd ERROR' => 'E R R O R :',
'advproxy chgwebpwd SUCCESS' => 'S U C C E S S :',
'advproxy chgwebpwd change password' => 'Change password',
'behind a proxy' => 'Behind a proxy:',
'bewan adsl pci st' => 'TO BE REMOVED',
'bewan adsl usb' => 'TO BE REMOVED',
+'bit' => 'Bit',
'bitrate' => 'Bitrate',
'bleeding rules' => 'Bleeding Edge Snort Rules',
'blue' => 'BLUE',
'ccd err invalidnet' => 'Invalid IP address. Format: 192.168.0.0/24 or 192.168.0.0/255.255.255.0.',
'ccd err iroute' => 'Network address for route is invalid.',
'ccd err irouteexist' => 'This route is already in use.',
-'ccd err isipsecnet' => 'The given subnet address already used by an IPsec network.',
+'ccd err isipsecnet' => 'The given subnet address is already used by an IPsec network.',
+'ccd err isipsecrw' => 'The given subnet address is already used by the IPsec rw network.',
'ccd err isovpnnet' => 'Subnet address already in use for OpenVPN Server.',
+'ccd err isovpnn2n' => 'Subnet address already in use for an OpenVPN N2N.',
'ccd err issubnet' => 'Subnet address already in use.',
'ccd err name' => 'Please choose a name.',
'ccd err nameexist' => 'Name already exists.',
'dns saved' => 'Successfully saved!',
'dns saved txt' => 'The two entered DNS server addresses have been saved successfully.<br />You have to reboot or reconnect that the changes have effect!',
'dns server' => 'DNS Server',
+'dns servers' => 'DNS Servers',
'dns title' => 'Domain Name System',
-'dnsforward' => 'DNS forwarding',
+'dnsforward' => 'DNS Forwarding',
'dnsforward add a new entry' => 'Add a new entry',
'dnsforward configuration' => 'DNS forward configuration',
'dnsforward edit an entry' => 'Edit an existing entry',
'done' => 'Do it',
'dos charset' => 'DOS Charset',
'down and up speed' => 'Enter your Down- and Uplink-Speed <br /> and then press <i>Save</i>.',
+'downlink' => 'Downlink',
'downlink speed' => 'Downlink speed (kbit/sec)',
'downlink std class' => 'downlink standard class',
'download' => 'download',
'end address' => 'End address:',
'enter ack class' => 'Enter the ACK- Class <br /> and then press <i>Save</i>.',
'enter data' => 'Enter your settings <br /> and then press <i>Save</i>.',
+'entropy' => 'Entropy',
'err bk 1' => 'Error creating archive',
'err bk 10 password' => 'Error with backup password',
'err bk 2 key' => 'Error creating key file',
'firewallhits' => 'firewallhits',
'firmware' => 'Firmware',
'firmware upload' => 'Upload Firmware/Drivers',
+'first' => 'First',
'fixed ip lease added' => 'Fixed IP lease added',
'fixed ip lease modified' => 'Fixed IP lease modified',
'fixed ip lease removed' => 'Fixed IP lease removed',
'fwdfw delete' => 'Delete',
'fwdfw dnat' => 'Destination NAT (Port forwarding)',
'fwdfw dnat error' => 'You have to select a single host for DNAT. Groups or networks are not allowed.',
+'fwdfw dnat extport' => 'The external port has to be empty when using Source NAT rules.',
+'fwdfw dnat nochoice' => 'Please pick Source NAT or Destination NAT from the NAT section.',
'fwdfw dnat porterr' => 'You have to select a single port or portrange (tcp/udp) for NAT',
'fwdfw dnat porterr2' => 'Cannot use external port (NAT) when no destination port is defined.',
'fwdfw edit' => 'Edit',
'fwdfw from' => 'From:',
'fwdfw hint ip1' => 'The last generated rule may never match, because source and destination subnets may overlap.',
'fwdfw hint ip2' => 'Please double-check if this rule makes sense: ',
+'fwdfw hint mac' => 'The destination group contains MAC addresses, which will be skipped during rule creation.',
'fwdfw iface' => 'Interface',
'fwdfw ipsec network' => 'IPsec networks:',
'fwdfw log' => 'Log',
'fwdfw sourceip' => 'Source address (MAC/IP address or network):',
'fwdfw std network' => 'Standard networks:',
'fwdfw target' => 'Destination',
-'fwdfw targetip' => 'Destination address (MAC/IP address or network):',
+'fwdfw targetip' => 'Destination address (IP address or network):',
'fwdfw till' => 'Until:',
'fwdfw time' => 'Time Constraints',
'fwdfw timeframe' => 'Use time constraints',
'fwdfw use srcport' => 'Source port:',
'fwdfw use srv' => 'Destination port:',
'fwdfw useless rule' => 'This rule is useless.',
+'fwdfw warn1' => 'This might lead to firewallrules which are applied to networks for which they are not intended to be.',
'fwdfw wd_fri' => 'Fri',
'fwdfw wd_mon' => 'Mon',
'fwdfw wd_sat' => 'Sat',
'gz with key' => 'Only an encrypted archive can be restored on this machine.',
'hangup' => 'Disconnect',
'hangup string' => 'Hangup:',
-'harddisk temperature' => 'Harddisk temperature',
-'harddisk temperature graphs' => 'hdd temperature graphs',
+'harddisk temperature' => 'Harddisk Temperature',
+'harddisk temperature graphs' => 'HDD Graphs',
'hardware graphs' => 'Hardware Graphs',
'hdd temperature in' => 'Harddisk temperature in',
'help' => 'Help',
'ipfire side is invalid' => 'IPFire side is invalid.',
'ipfires hostname' => 'IPFire\'s Hostname',
'ipinfo' => 'IP info',
+'ipsec' => 'IPsec',
'ipsec network' => 'IPsec network',
+'ipsec no connections' => 'No active IPsec connections',
'iptable rules' => 'IPTable rules',
'iptmangles' => 'IPTable Mangles',
'iptnats' => 'IPTable Network Address Translation',
'lan' => 'LAN',
'lang' => 'en',
'languagepurpose' => 'Select the language you wish IPFire to display in:',
+'last' => 'Last',
'last activity' => 'Last Activity',
'lateprompting' => 'Lateprompting',
'lease expires' => 'Lease expires',
'mac address error not valid' => 'MAC addresse not valid!',
'mac address header' => 'MAC address on red0',
'mac address in use' => 'MAC address already in use',
-'mac address menu' => 'Assign MAC-address',
+'mac address menu' => 'Assign MAC-Address',
'mac address recon' => 'Trying to reconnect!',
'mac address saved' => 'Successfully saved!',
'mac address saved txt' => 'The MAC address has been successfully saved, but changes will only take effect after reboot or reconnection.',
-'mac address title' => 'Medium Access Control Address',
+'mac address title' => 'Assign MAC Address',
'mac desc' => 'Here you are able to change the MAC address on red0. The address must be entered in hexadecimal (0-9,a-f), a valid entry is <br />e.g. 00-01-02-0e-b8-d6 or 00:01:02:0e:b8:d6.',
+'mac filter' => 'MAC filter',
'mac new' => 'new MAC address:',
'mac1 new' => 'new MAC address 1 (vdsl-inet):',
'mac2 new' => 'new MAC address 2 (vdsl-iptv):',
'max size' => 'Max object size (KB):',
'max throughput' => 'Maximum throughput',
'maximal' => 'Maximal',
+'maximum' => 'Maximum',
'maximum retries' => 'Maximum retries:',
'may' => 'May',
'mbmon display' => 'Display',
'mbmon volt' => 'Voltage',
'meaning' => 'meaning',
'media' => 'Media',
-'media information' => 'media information',
+'media information' => 'Media information',
'medium' => 'Medium',
'memory' => 'Memory',
-'memory information' => 'memory information',
+'memory information' => 'Memory information',
'memory usage per' => 'Memory Usage per',
'messages logging' => 'Logsettings for /var/log/messages',
'method' => 'Method:',
'min delay' => 'Minimum delay',
'min size' => 'Min object size (KB):',
'minimal' => 'Minimal',
+'minimum' => 'Minimum',
'minute' => 'Minute',
'minutes' => 'Minutes',
'misc-options' => 'Miscellaneous options',
'notice' => 'Notice',
'november' => 'November',
'ntp common settings' => 'Common settings',
-'ntp configuration' => 'NTP configuration',
+'ntp configuration' => 'NTP Configuration',
'ntp must be enabled to have clients' => 'NTP must be enabled to have clients.',
'ntp server' => 'NTP Server',
'ntp sync' => 'Synchronization',
'ovpn errmsg green already pushed' => 'Route for green network is always set',
'ovpn errmsg invalid ip or mask' => 'Invalid network-address or subnetmask',
'ovpn log' => 'OVPN-Log',
+'ovpn mgmt in root range' => 'A port number of 1024 or higher is required.',
'ovpn mtu-disc' => 'Path MTU Discovery',
'ovpn mtu-disc and mtu not 1500' => 'Path MTU Discovery requires a MTU of 1500.',
'ovpn mtu-disc maybe' => 'Optionally',
'ovpn mtu-disc off' => 'Disabled',
'ovpn mtu-disc with mssfix or fragment' => 'Path MTU Discovery cannot be used with mssfix or fragment.',
'ovpn mtu-disc yes' => 'Forced',
+'ovpn no connections' => 'No active OpenVPN connections',
'ovpn on blue' => 'OpenVPN on BLUE',
'ovpn on orange' => 'OpenVPN on ORANGE',
'ovpn on red' => 'OpenVPN on RED',
+'ovpn port in root range' => 'A port number of 1024 or higher is required.',
'ovpn routes push' => 'Routes (one per line) e.g. 192.168.10.0/255.255.255.0 192.168.20.0/24',
'ovpn routes push options' => 'Route push options',
'ovpn server status' => 'Current OpenVPN server status:',
'ovpn_processprioVH' => 'Very high',
'ovpnstatus log' => 'OVPN-Status-Log',
'ovpnsys log' => 'OVPN-System-Log',
-'p2p block' => 'P2P block',
+'p2p block' => 'P2P networks',
'p2p block save notice' => 'Please reload the firewall ruleset in order to apply your changes.',
'package failed to install' => 'Package failed to install.',
'pagerefresh' => 'Page is beeing refreshed, please wait.',
'start ovpn server' => 'Start OpenVPN Server',
'state or province' => 'State or Province',
'static ip' => 'Static IP',
-'static routes' => 'Static routes',
+'static routes' => 'Static Routes',
'status' => 'Status',
'status information' => 'Status information',
-'status ovpn' => '4. OpenVPN Status / Configuration:',
+'status ovpn' => 'OpenVPN',
'std classes' => 'Standardclasses',
'stop' => 'Stop',
'stop ovpn server' => 'Stop OpenVPN Server',
'swap usage per' => 'Swap usage per',
'system' => 'System',
'system graphs' => 'System Graphs',
-'system information' => 'System information',
+'system information' => 'System Information',
'system log viewer' => 'System Log Viewer',
'system logs' => 'System Logs',
'system status information' => 'System Status Information',
'updxlrtr weekly' => 'weekly',
'updxlrtr year' => 'one year',
'upgrade' => 'upgrade',
+'uplink' => 'Uplink',
'uplink speed' => 'Uplink speed (kbit/sec)',
'uplink std class' => 'uplink standard class',
'upload' => 'Upload',
'uptime' => 'Uptime',
'uptime and users' => 'Uptime and users:',
'uptime load average' => 'Load average',
-'url filter' => 'Content Filter',
+'url filter' => 'URL Filter',
'urlfilter access' => 'Access',
'urlfilter activity detection' => 'Activity detection',
'urlfilter add new time constraint rule' => 'Add new time constraint rule',
'vpn aggrmode' => 'IKE aggressive mode allowed. Avoid if possible (preshared key is transmitted in clear text)!',
'vpn altname syntax' => 'SubjectAltName is a comma separated list of e-mail, dns, uri, rid and ip objects.<br />email:an email address. Syntax email:copy takes the email field from the cert to be used.<br />DNS:a valid domain name.<br />URI:any valid uri.<br />RID:registered object identifier.<br />IP:an IP address.<br />Note:charset is limited and case is significant.<br />Example:<br /><b>e-mail:</b>ipfire@foo.org<b>,email:</b>copy<b>,DNS:</b>www.ipfire.org<b>,IP:</b>127.0.0.1<b>,URI:</b>http://url/to/something',
'vpn auth-dn' => 'Peer is identified by either IPV4_ADDR, FQDN, USER_FQDN or DER_ASN1_DN string in remote ID field',
-'vpn configuration main' => 'VPN configuration - Main',
+'vpn configuration main' => 'VPN Configuration',
'vpn delayed start' => 'Delay before launching VPN (seconds)',
'vpn delayed start help' => 'If required, this delay can be used to allow dynamic DNS updates to propagate properly. 60 is a common value when RED is a dynamic IP.',
'vpn incompatible use of defaultroute' => 'hostname=%defaultroute not allowed',
'wlan client wpa mode ccmp ccmp' => 'CCMP-CCMP',
'wlan client wpa mode ccmp tkip' => 'CCMP-TKIP',
'wlan client wpa mode tkip tkip' => 'TKIP-TKIP',
+'wlan clients' => 'Wireless clients',
'wlanap access point' => 'Access Point',
'wlanap channel' => 'Channel',
'wlanap country' => 'Country Code',
projects / people / teissler / ipfire-2.x.git / blobdiff