. /etc/sysconfig/rc
. ${rc_functions}
+. /etc/init.d/networking/functions.network
+
+#Define some defaults
+INET_VLAN=7
+IPTV_VLAN=8
+
+eval $(/usr/local/bin/readhash /var/ipfire/main/settings)
+if [ "$RRDLOG" == "" ]; then
+ RRDLOG=/var/log/rrd
+fi
+
eval $(/usr/local/bin/readhash /var/ipfire/ethernet/settings)
+eval $(/usr/local/bin/readhash /var/ipfire/dns/settings)
+eval $(/usr/local/bin/readhash /var/ipfire/mac/settings)
+
+MAC=$(tr - : <<<$MAC)
+MAC1=$(tr - : <<<$MAC1)
+MAC2=$(tr - : <<<$MAC2)
TYPE="${RED_TYPE}"
DEVICE="${RED_DEV}"
-if [ "$TYPE" == "STATIC" ]; then
- ADDRESS="${RED_ADDRESS}"
- BROADCAST="${RED_BROADCAST}"
- NETADDRESS="${RED_NETADDRESS}"
- NETMASK="${RED_NETMASK}"
+if [ "$TYPE" == "STATIC" ] || [ "$TYPE" == "DHCP" ]; then
+ if [ "$DEVICE" == "" ]; then
+ boot_mesg "No device for red network. Please run setup." ${FAILURE}
+ echo_failure
+ [ "${1}" == "start" ] && exit 0
+ fi
+fi
+
+if [ "${TYPE}" == "STATIC" ]; then
+ if [ "${DEVICE}" != "${GREEN_DEV}" ]; then
+ ADDRESS="${RED_ADDRESS}"
+ BROADCAST="${RED_BROADCAST}"
+ NETADDRESS="${RED_NETADDRESS}"
+ NETMASK="${RED_NETMASK}"
+ else
+ ADDRESS="${GREEN_ADDRESS}"
+ BROADCAST="${GREEN_BROADCAST}"
+ NETADDRESS="${GREEN_NETADDRESS}"
+ NETMASK="${GREEN_NETMASK}"
+ fi
GATEWAY="${DEFAULT_GATEWAY}"
# DNS1
# DNS2
if [ -z "${BROADCAST}" ]; then
- boot_mesg "BROADCAST variable missing from input, cannot continue." ${FAILURE}
+ boot_mesg "BROADCAST variable missing, cannot continue." ${FAILURE}
echo_failure
exit 1
fi
echo_failure
exit 1
fi
-
-elif [ "${TYPE}" == "DHCP" ]; then
-
- PIDFILE="/var/run/dhcpcd-${DEVICE}.pid"
- LEASEINFO="/var/ipfire/dhcpc/dhcpcd-${DEVICE}.info"
- DHCP_START="-N -R -L /var/ipfire/dhcpc -c /var/ipfire/dhcpc/dhcpcd.exe "
- DHCP_STOP="-k -c /var/ipfire/dhcpc/dhcpcd.exe "
-
fi
case "${1}" in
start)
- boot_mesg "Bringing up the ${DEVICE} interface..."
- boot_mesg_flush
-
- # Check if an interface is there...
- if ip link show ${DEVICE} > /dev/null 2>&1; then
- link_status=`ip link show ${DEVICE} 2> /dev/null`
- if [ -n "${link_status}" ]; then
- if ! echo "${link_status}" | grep -q UP; then
- ip link set ${DEVICE} up
+ if [ "${DEVICE}" != "${GREEN_DEV}" ] && [ "${DEVICE}" != "" ]; then
+ boot_mesg "Bringing up the ${DEVICE} interface..."
+ boot_mesg_flush
+ # Check if an interface is there...
+ if ip link show ${DEVICE} > /dev/null 2>&1; then
+ link_status=`ip link show ${DEVICE} 2> /dev/null`
+ if [ -n "${link_status}" ]; then
+ if ! echo "${link_status}" | grep -q UP; then
+ if [ -n "$MAC" ]; then
+ boot_mesg "Setting mac address on ${DEVICE} to ${MAC}"
+ ip link set dev ${DEVICE} address ${MAC}
+ evaluate_retval
+ fi
+ ip link set ${DEVICE} up
+ fi
fi
+ else
+ boot_mesg "Interface ${DEVICE} doesn't exist." ${FAILURE}
+ echo_failure
+ exit 1
fi
- else
- boot_mesg "Interface ${DEVICE} doesn't exist." ${FAILURE}
- echo_failure
- exit 1
fi
+
+ ## Create & Enable vnstat
+ /usr/bin/vnstat -u -i ${DEVICE} -r --enable --force > /dev/null 2>&1
if [ "${TYPE}" == "STATIC" ]; then
- boot_mesg "Adding IPv4 address ${ADDRESS} to the ${DEVICE} interface..."
- ip addr add ${args} dev ${DEVICE}
- evaluate_retval
+
+ if [ "$DEVICE" != "${GREEN_DEV}" ]; then
+ boot_mesg "Adding IPv4 address ${ADDRESS} to the ${DEVICE} interface..."
+ ip addr add ${args} dev ${DEVICE}
+ evaluate_retval
+ fi
echo -n "${DEVICE}" > /var/ipfire/red/iface
echo -n "${ADDRESS}" > /var/ipfire/red/local-ipaddress
echo -n "${GATEWAY}" > /var/ipfire/red/remote-ipaddress
+ grep -v -E "\<gateway\>" /etc/hosts > /tmp/hosts
+ echo "$GATEWAY gateway" >> /tmp/hosts
+ mv /tmp/hosts /etc/hosts
echo -n "${DNS1}" > /var/ipfire/red/dns1
echo -n "${DNS2}" > /var/ipfire/red/dns2
touch /var/ipfire/red/active
evaluate_retval
run_subdir ${rc_base}/init.d/networking/red.up/
-
- elif [ "${TYPE}" == "DHCP" ]; then
- boot_mesg -n "Starting dhcpcd on the ${DEVICE} interface..."
- echo -n "${DEVICE}" > /var/ipfire/red/iface
- # Test to see if there is a stale pid file
- if [ -f "$PIDFILE" ]; then
- ps `cat "$PIDFILE"` | grep dhcpcd > /dev/null
- if [ $? != 0 ]; then
- rm -f /var/run/dhcpcd-${DEVICE}.pid > /dev/null
- else
- boot_mesg "dhcpcd already running!" ${WARNING}
- echo_warning
- exit 2
- fi
- fi
-
+ # Configure aliases only if red static
+ /usr/local/bin/setaliases
+
+ elif [ "${TYPE}" == "DHCP" ]; then
+ # Add firewall rules to allow comunication with the dhcp server on red.
iptables -A REDINPUT -p tcp --source-port 67 --destination-port 68 -i ${DEVICE} -j ACCEPT
iptables -A REDINPUT -p udp --source-port 67 --destination-port 68 -i ${DEVICE} -j ACCEPT
-
- if [ -n "${RED_DHCP_HOSTNAME}" ]; then
- DHCP_START+="-h ${RED_DHCP_HOSTNAME} "
- fi
-
- /sbin/dhcpcd ${DEVICE} ${DHCP_START} >/dev/null 2>&1
- RET="$?"
-
- if [ "$RET" = "0" ]; then
- . /var/ipfire/dhcpc/dhcpcd-${DEVICE}.info
- echo ""
- echo_ok
- boot_mesg " DHCP Assigned Settings for ${DEVICE}:"
- boot_mesg_flush
- boot_mesg " IP Address: $IPADDR"
- boot_mesg_flush
- if [ -n "${RED_DHCP_HOSTNAME}" ]; then
- boot_mesg " Hostname: $RED_DHCP_HOSTNAME"
- boot_mesg_flush
- fi
- boot_mesg " Subnet Mask: $NETMASK"
- boot_mesg_flush
- boot_mesg " Default Gateway: $GATEWAY"
- boot_mesg_flush
- boot_mesg " DNS Server: $DNS"
- boot_mesg_flush
-
- echo -n `/etc/rc.d/helper/getdnsfromdhcpc.pl 1` > /var/ipfire/red/dns1
- echo -n `/etc/rc.d/helper/getdnsfromdhcpc.pl 2` > /var/ipfire/red/dns2
- . /var/ipfire/dhcpc/dhcpcd-${DEVICE}.info
- echo "$IPADDR" > /var/ipfire/red/local-ipaddress
- echo "$GATEWAY" > /var/ipfire/red/remote-ipaddress
- else
- echo ""
- $(exit "$RET")
- evaluate_retval
+ echo -n "${DEVICE}" > /var/ipfire/red/iface
+
+ # Check if the wlan-client is used on red.
+ # To determine this we check if a wpa_supplicant is running.
+ pid="$(pidof wpa_supplicant)"
+
+ if [ -z "${pid}" ]; then
+ # No wpa_supplicant is running. So it's save to start dhcpcd.
+ dhcpcd_start "${DEVICE}"
fi
-
+
+ ## Create & Enable vnstat
+ /usr/bin/vnstat -u -i ${DEVICE} -r --enable --force > /dev/null 2>&1
+
elif [ "$TYPE" == "PPPOE" ]; then
-
+
if ( ps ax | grep -q [p]ppd ); then
- echo Error! A pppd is still running. Stop it first.
- echo
- exit 1;
+ boot_mesg "pppd is still running." ${FAILURE}
+ echo_failure
+ exit 1
fi
+
eval $(/usr/local/bin/readhash /var/ipfire/ppp/settings)
[ -c "/dev/ppp" ] || mknod /dev/ppp c 108 0
-
+
+ # We force the plugin method, anyway.
+ METHOD="PPPOE_PLUGIN"
+
PPP_NIC=${DEVICE}
-
- if [ "$TYPE" == "pppoeatm" ]; then
+
+
+ if [ "$TYPE" == "pppoeatm" ] || [ "$TYPE" == "pptpatm" ]; then
PPP_NIC=nas0
- boot_mesg "Create ATM-Bridge as $PPP_NIC ..."
+ DEVICE=nas0
+ boot_mesg "Createing ATM-Bridge as $PPP_NIC ..."
br2684ctl -c0 -e${ENCAP} -a0.${VPI}.${VCI} >/dev/null 2>&1 &
sleep 1
- ifconfig $PPP_NIC up
+ if [ "$TYPE" == "pppoeatm" ]; then
+ TYPE="pppoe"
+ fi
+ if [ "$TYPE" == "pptpatm" ]; then
+ TYPE="pptp"
+ fi
+ fi
+
+ if [ "$TYPE" == "vdsl" ]; then
+ boot_mesg "Createing VLAN Interface ${DEVICE}.${INET_VLAN} ..."
+ modprobe 8021q
+ vconfig add ${DEVICE} ${INET_VLAN}
+ if [ -n "$MAC1" ]; then
+ boot_mesg "Setting mac address on ${DEVICE}.${INET_VLAN} to ${MAC1}"
+ ip link set dev ${DEVICE}.${INET_VLAN} address ${MAC1}
+ evaluate_retval
+ fi
+ PPP_NIC=${DEVICE}.${INET_VLAN}
+ sleep 0.2
+ ip link set ${PPP_NIC} up
TYPE="pppoe"
fi
- if [ "$TYPE" == "pppoe" ]; then
- boot_mesg "Bringing up the PPPoE interface on $PPP_NIC ..."
- ip addr add 1.1.1.1/24 broadcast 1.1.1.255 dev $PPP_NIC
+ if [ "${IPTV}" == "enable" ]; then
+ PIDFILE="/var/run/dhcpcd-${DEVICE}.${IPTV_VLAN}.pid"
+ LEASEINFO="/var/ipfire/dhcpc/dhcpcd-${DEVICE}.${IPTV_VLAN}.info"
+ # Test to see if there is a stale pid file
+ if [ -f "$PIDFILE" ]; then
+ ps `cat "$PIDFILE"` | grep dhcpcd > /dev/null
+ if [ $? != 0 ]; then
+ rm -f /var/run/dhcpcd-${DEVICE}.${IPTV_VLAN}.pid > /dev/null
+ fi
+ fi
+
+ if [ ! -f "$PIDFILE" ]; then
+ boot_mesg "Createing VLAN Interface ${DEVICE}.${IPTV_VLAN} ..."
+ modprobe 8021q
+ vconfig add ${DEVICE} ${IPTV_VLAN}
+ if [ -n "$MAC2" ]; then
+ boot_mesg "Setting mac address on ${DEVICE}.${IPTV_VLAN} to ${MAC2}"
+ ip link set dev ${DEVICE}.${IPTV_VLAN} address ${MAC2}
+ evaluate_retval
+ fi
+ boot_mesg -n "Starting dhcpcd on the ${DEVICE}.${IPTV_VLAN} interface..."
+ /sbin/dhcpcd ${DEVICE}.${IPTV_VLAN} ${DHCP_START} >/dev/null 2>&1
+ RET="$?"
+
+ if [ "$RET" = "0" ]; then
+ . /var/ipfire/dhcpc/dhcpcd-${DEVICE}.${IPTV_VLAN}.info
+ echo ""
+ echo_ok
+ boot_mesg " DHCP Assigned Settings for ${DEVICE}.${IPTV_VLAN}:"
+ boot_mesg_flush
+ boot_mesg " IP Address: $ip_address"
+ boot_mesg_flush
+ boot_mesg " Hostname: $RED_DHCP_HOSTNAME"
+ boot_mesg_flush
+ boot_mesg " Subnet Mask: $subnet_mask"
+ boot_mesg_flush
+ boot_mesg " Default Gateway: $routers"
+ boot_mesg_flush
+ boot_mesg " DNS Server: $domain_name_servers"
+ boot_mesg_flush
+
+ else
+ echo ""
+ $(exit "$RET")
+ evaluate_retval
+ fi
+ fi
+ fi
+ if [ "$TYPE" == "pppoe" ] || [ "$TYPE" == "pptp" ]; then
+ if [ "$PPP_NIC" == "" ]; then
+ boot_mesg "No device for red interface given. Check netsetup or dialprofile!" ${FAILURE}
+ echo_failure
+ exit 0
+ fi
+ boot_mesg "Bringing up the $TYPE interface on $PPP_NIC ..."
+ ip addr flush dev $PPP_NIC >/dev/null 2>&1
+ if [ "$TYPE" == "pptp" ]; then
+ if [ "$PPTP_NICCFG" == "dhcp" ]; then
+ # Test to see if there is a stale pid file
+ if [ -f "$PIDFILE" ]; then
+ ps `cat "$PIDFILE"` | grep dhcpcd > /dev/null
+ if [ $? != 0 ]; then
+ rm -f /var/run/dhcpcd-${DEVICE}.pid > /dev/null
+ fi
+ fi
+
+ if [ ! -f "$PIDFILE" ]; then
+ boot_mesg -n "Starting dhcpcd on the ${DEVICE} interface..."
+ /sbin/dhcpcd ${DEVICE} ${DHCP_START} >/dev/null 2>&1
+ RET="$?"
+
+ if [ "$RET" = "0" ]; then
+ . /var/ipfire/dhcpc/dhcpcd-${DEVICE}.info
+ echo ""
+ echo_ok
+ boot_mesg " DHCP Assigned Settings for ${DEVICE}:"
+ boot_mesg_flush
+ boot_mesg " IP Address: $ip_address"
+ boot_mesg_flush
+ boot_mesg " Hostname: $RED_DHCP_HOSTNAME"
+ boot_mesg_flush
+ boot_mesg " Subnet Mask: $subnet_mask"
+ boot_mesg_flush
+ boot_mesg " Default Gateway: $routers"
+ boot_mesg_flush
+ boot_mesg " DNS Server: $domain_name_servers"
+ boot_mesg_flush
+ /sbin/route add $PPTP_PEER gw $routers $PPP_NIC
+ else
+ echo ""
+ $(exit "$RET")
+ evaluate_retval
+ fi
+ fi
+ else
+ ip addr add $PPTP_NICCFG dev $PPP_NIC
+ fi
+ fi
+ ip link set ${PPP_NIC} up
+ if [ -n "${PPTP_ROUTE}" ]; then
+ boot_mesg "Set route ${PPTP_ROUTE} to pptp server..."
+ route add ${PPTP_ROUTE}
+ fi
else
boot_mesg "Bringing up the PPP via ${TYPE} on ${COMPORT}..."
fi
+
### ###
### Configuring the pppd ###
### ###
### Plugin Options
#
- [ "${METHOD}" == "PPPOE_PLUGIN" ] && \
- PLUGOPTS="plugin /usr/lib/pppd/2.4.4/rp-pppoe.so"
-
- # PLUGOPTS="plugin /usr/lib/pppd/2.4.4/rp-pppoe.so nic-$PPP_NIC"
+ if [ "$TYPE" == "pppoe" ]; then
+ [ "${METHOD}" == "PPPOE_PLUGIN" ] && \
+ PLUGOPTS="plugin rp-pppoe.so"
+ fi
### Synchronous Mode
#
DNS=""
echo nameserver=$DNS1 > /etc/ppp/resolv.conf
echo nameserver=$DNS2 >> /etc/ppp/resolv.conf
-
fi
### Dial On Demand
fi
fi
- ### When using pppoe-plugin the device has to be the last option
- #
- [ "${METHOD}" == "PPPOE_PLUGIN" ] && PLUGOPTS+=" $PPP_NIC"
+ if [ "$TYPE" == "pppoe" ]; then
+ ### When using pppoe-plugin the device has to be the last option
+ #
+ [ "${METHOD}" == "PPPOE_PLUGIN" ] && PLUGOPTS+=" $PPP_NIC"
+ fi
if [ "$TYPE" == "modem" ]; then
PLUGOPTS=" /dev/${COMPORT} ${DTERATE} connect /etc/ppp/dialer lock modem crtscts"
+ METHOD="PPPOE_PLUGIN"
elif [ "$TYPE" == "serial" ]; then
PLUGOPTS=" /dev/${COMPORT} ${DTERATE} connect /bin/true lock modem crtscts"
+ METHOD="PPPOE_PLUGIN"
fi
### Standard PPP options we always use
#
PPP_STD_OPTIONS="$PLUGOPTS $DNS defaultroute noipdefault noauth"
- PPP_STD_OPTIONS+=" default-asyncmap hide-password nodetach mtu ${MTU}"
- PPP_STD_OPTIONS+=" mru ${MTU} noaccomp nodeflate nopcomp novj novjccomp"
+ PPP_STD_OPTIONS+=" default-asyncmap hide-password nodetach"
+ PPP_STD_OPTIONS+=" noaccomp nodeflate nopcomp novj novjccomp"
PPP_STD_OPTIONS+=" nobsdcomp user ${USERNAME} lcp-echo-interval 20"
- PPP_STD_OPTIONS+=" lcp-echo-failure 3 ${AUTH}"
+ PPP_STD_OPTIONS+=" lcp-echo-failure 5 ${AUTH}"
+
+ if [ -n "${MTU}" ]; then
+ PPP_STD_OPTIONS="${PPP_STD_OPTIONS} mtu ${MTU}"
+ fi
+
+ if [ -n "${MRU}" ]; then
+ PPP_STD_OPTIONS="${PPP_STD_OPTIONS} mru ${MRU}"
+ fi
### Debugging
#
PPPOE_CMD="/usr/sbin/pppoe -p /var/run/ppp-ipfire.pid.pppoe -I $PPP_NIC"
PPPOE_CMD+=" -T 80 -U $PPPOE_SYNC $ACNAME $SERVICENAMEOPT"
fi
+
+ ### PPTP ###
+ #
+ if [ "$TYPE" == "pptp" ]; then
+ PPPOE_CMD="pptp $PPTP_PEER --nolaunchpppd"
+ METHOD=""
+ fi
### Run everything
#
- if [ "${METHOD}" == "PPPOE_PLUGIN" ]; then
+ if [ "$METHOD" == "PPPOE_PLUGIN" ]; then
/usr/sbin/pppd $PPP_STD_OPTIONS $DEBUG $DEMAND >/dev/null 2>&1 &
evaluate_retval
# echo PLUGIN: /usr/sbin/pppd $PPP_STD_OPTIONS $DEBUG $DEMAND
evaluate_retval
# echo PPP: /usr/sbin/pppd pty "$PPPOE_CMD" $PPP_STD_OPTIONS $DEBUG $DEMAND $PPPD_SYNC
fi
-
+ ## Create & Enable vnstat
+ /usr/bin/vnstat -u -i ppp0 -r --enable --force > /dev/null 2>&1
/etc/rc.d/init.d/connectd start
-
+ # Add a NaN value to ppp0 rrd to supress spikes at reconnect
+ rrdtool update $RRDLOG/collectd/localhost/interface/if_octets-ppp0.rrd \
+ $(date +%s):: > /dev/null 2>&1
+ exit 0
fi
;;
stop)
if [ "$TYPE" == "STATIC" ]; then
- boot_mesg "Removing IPv4 address ${ADDRESS} from the ${DEVICE} interface..."
- ip addr del ${args} dev ${DEVICE}
- evaluate_retval
-
- run_subdir ${rc_base}/init.d/networking/red.down/
-
- elif [ "$TYPE" == "DHCP" ]; then
- boot_mesg -n "Stopping dhcpcd on the ${DEVICE} interface..."
- if [ -e $LEASEINFO ]; then
- . $LEASEINFO
- if [ "$LEASETIME" = "4294967295" ]; then
- # do nothing, just echo ok
- echo ""
- echo_ok
- else
- if [ -n "$DHCP_STOP" ]; then
- /sbin/dhcpcd ${DEVICE} $DHCP_STOP &> /dev/null
- RET="$?"
- if [ "$RET" -eq 0 ]; then
- echo ""
- echo_ok
- elif [ "$RET" -eq 1 ]; then
- boot_mesg "dhcpcd not running!" ${WARNING}
- echo_warning
- else
- echo ""
- echo_failure
- fi
- else
- echo ""
- killproc dhcpcd
- fi
- fi
- else
- boot_mesg -n "LEASEINFO Test failed! - " ${WARNING}
- boot_mesg "dhcpcd is not running!" ${WARNING}
- echo_warning
- exit 1
+ boot_mesg "Stopping default gateway ${GATEWAY}..."
+ ip route del default via ${GATEWAY} >/dev/null 2>&1
+ echo_ok
+ if [ "$DEVICE" != "${GREEN_DEV}" ]; then
+ boot_mesg "Removing IPv4 addresses from the ${DEVICE} interface..."
+ ip addr flush dev ${DEVICE}
+ evaluate_retval
fi
-
+ run_subdir ${rc_base}/init.d/networking/red.down/
+
elif [ "$TYPE" == "PPPOE" ]; then
boot_mesg "Bringing down the PPP interface ..."
+ ## Disable vnstat collection
+ /usr/bin/vnstat -u -i ppp0 -r --disable > /dev/null 2>&1
rm -f /var/ipfire/red/keepconnected
killall -w -s TERM /usr/sbin/pppd 2>/dev/null
evaluate_retval
- killall -w -s TERM br2684ctl >/dev/null 2>&1
- ip addr del 1.1.1.1/24 broadcast 1.1.1.255 dev ${DEVICE}
-
+ # Add a NaN value to ppp0 rrd to supress spikes at reconnect
+ rrdtool update $RRDLOG/collectd/localhost/interface/if_octets-ppp0.rrd \
+ $(date +%s):: > /dev/null 2>&1
+
+ elif [ "$TYPE" == "DHCP" ]; then
+ # Check if the wlan-client is used on red.
+ # To determine this we check if a wpa_supplicant is running.
+ pid="$(pidof wpa_supplicant)"
+
+ if [ -z "${pid}" ]; then
+ # Stop dhcpcd.
+ dhcpcd_stop "${DEVICE}"
+ fi
fi
-
- link_status=`ip link show $DEVICE 2> /dev/null`
- if [ -n "${link_status}" ]; then
- if echo "${link_status}" | grep -q UP; then
- boot_mesg "Bringing down the ${DEVICE} interface..."
- ip link set ${DEVICE} down
- evaluate_retval
+
+ if [ -n "${PPTP_ROUTE}" ]; then
+ route del ${PPTP_ROUTE}
+ fi
+
+ if [ "$DEVICE" != "${GREEN_DEV}" ] && [ "$DEVICE" != "" ]; then
+ link_status=`ip link show $DEVICE.${INET_VLAN} 2> /dev/null`
+ if [ -n "${link_status}" ]; then
+ if echo "${link_status}" | grep -q UP; then
+ boot_mesg "Bringing down the ${DEVICE}.${INET_VLAN} interface..."
+ ip link set ${DEVICE}.${INET_VLAN} down
+ vconfig rem ${DEVICE}.${INET_VLAN}
+ evaluate_retval
+ fi
+ else
+ link_status=`ip link show $DEVICE 2> /dev/null`
+ if [ -n "${link_status}" ]; then
+ if echo "${link_status}" | grep -q UP; then
+ boot_mesg "Bringing down the ${DEVICE} interface..."
+ ip link set ${DEVICE} down
+ evaluate_retval
+ fi
+ fi
fi
fi
-
+ killall -w -s KILL /usr/sbin/pppd >/dev/null 2>&1
+ killall -w -s KILL pptp >/dev/null 2>&1
+ killall -w -s KILL br2684ctl >/dev/null 2>&1
+
+ ## Disable vnstat collection
+ /usr/bin/vnstat -u -i ${DEVICE} -r --disable > /dev/null 2>&1
+
rm -f /var/ipfire/red/{active,device,dial-on-demand,dns1,dns2,local-ipaddress,remote-ipaddress,resolv.conf}
+ exit 0;
;;
-
esac
# End