X-Git-Url: http://git.ipfire.org/?p=people%2Fteissler%2Fipfire-2.x.git;a=blobdiff_plain;f=langs%2Fen%2Fcgi-bin%2Fen.pl;h=ab85ab6e6a218af93f8ca61302f3e32a64700a77;hp=f04a17e7642bd4409b3a92c610832c0b27878f0b;hb=296a73a5326636a53c642dcd046b03fcff221835;hpb=b7e621e1b1e3575ce5b10edfc6b99314c75864a0 diff --git a/langs/en/cgi-bin/en.pl b/langs/en/cgi-bin/en.pl index f04a17e76..ab85ab6e6 100644 --- a/langs/en/cgi-bin/en.pl +++ b/langs/en/cgi-bin/en.pl @@ -10,7 +10,6 @@ 'Choose Rule' => 'Choose one of the following rules.', 'Class' => 'Class', 'Class was deleted' => 'with potential subclasses was deleted', -'Client status and controlc' => 'Client status and control:', 'ConnSched action' => 'Action:', 'ConnSched add action' => 'Add action', 'ConnSched change profile title' => 'Change to profile:', @@ -34,6 +33,7 @@ 'Level7 rule' => 'Level7 rule', 'Local VPN IP' => 'Internal Network (GREEN):', 'MTU' => 'MTU size:', +'Number of Countries for the pie chart' => 'Number of Countries for the pie chart', 'Number of IPs for the pie chart' => 'Number of IPs for the pie chart', 'Number of Ports for the pie chart' => 'Number of ports for the pie chart', 'OVPN' => 'OpenVPN', @@ -188,6 +188,7 @@ 'advproxy banned mac clients' => 'Banned MAC addresses (one per line)', 'advproxy cache management' => 'Cache management', 'advproxy cache replacement policy' => 'Cache replacement policy', +'advproxy cache-digest' => 'Enable Cache-Digest Generation', 'advproxy chgwebpwd ERROR' => 'E R R O R :', 'advproxy chgwebpwd SUCCESS' => 'S U C C E S S :', 'advproxy chgwebpwd change password' => 'Change password', @@ -416,6 +417,7 @@ 'behind a proxy' => 'Behind a proxy:', 'bewan adsl pci st' => 'TO BE REMOVED', 'bewan adsl usb' => 'TO BE REMOVED', +'bit' => 'bit', 'bitrate' => 'Bitrate', 'bleeding rules' => 'Bleeding Edge Snort Rules', 'blue' => 'BLUE', @@ -497,8 +499,10 @@ 'ccd err invalidnet' => 'Invalid IP address. Format: 192.168.0.0/24 or 192.168.0.0/255.255.255.0.', 'ccd err iroute' => 'Network address for route is invalid.', 'ccd err irouteexist' => 'This route is already in use.', -'ccd err isipsecnet' => 'The given subnet address already used by an IPsec network.', -'ccd err isovpnnet' => 'Subnet address already in use for OpenVPN Server.', +'ccd err isipsecnet' => 'The given subnet address is already used by an IPsec network.', +'ccd err isipsecrw' => 'The given subnet address is already used by the IPsec rw network.', +'ccd err isovpnn2n' => 'The subnet address is already in use for an OpenVPN net-to-net connection.', +'ccd err isovpnnet' => 'The subnet address is already in use for the OpenVPN server.', 'ccd err issubnet' => 'Subnet address already in use.', 'ccd err name' => 'Please choose a name.', 'ccd err nameexist' => 'Name already exists.', @@ -583,7 +587,11 @@ 'could not open installed updates file' => 'Could not open installed updates file', 'could not open update information file' => 'Could not open update information file. The update file is corrupt.', 'could not retrieve common name from certificate' => 'Could not retrieve common name from certificate.', +'count' => 'Count', +'countries' => 'Countries', 'country' => 'Country', +'country codes and flags' => 'Country Codes and Flags:', +'countrycode' => 'Code', 'cpu frequency per' => 'CPU frequency per', 'cpu idle usage' => 'Idle CPU Usage', 'cpu interrupt usage' => 'Interrupt CPU Usage', @@ -664,8 +672,12 @@ 'destination port numbers' => 'Destination port must be a valid port number or port range.', 'destination port overlaps' => 'Destination port range overlaps an existing port range.', 'detail level' => 'Detail level', +'details' => 'Details', 'device' => 'Device', 'devices on blue' => 'Devices on BLUE', +'dh' => 'Diffie-Hellman Key', +'dh key warn' => 'Keys with 1024 and 2048 bit takes up to several minutes, 3072 and 4096 bit might needs several hours. Please be patient.', +'dh name is invalid' => 'Name ist ungŸltig, bitte "dh1024.pem" verwenden.', 'dhcp advopt add' => 'Add a DHCP option', 'dhcp advopt added' => 'DHCP option added', 'dhcp advopt blank value' => 'DHCP Option value cannot be empty.', @@ -722,7 +734,7 @@ 'dmz pinhole rule added' => 'DMZ pinhole rule added; restarting DMZ pinhole', 'dmz pinhole rule removed' => 'DMZ pinhole rule removed; restarting DMZ pinhole', 'dmzpinholes for same net not necessary' => 'DMZ Pinholes are not necessary for same net. Select different source or destination net.', -'dnat address' => 'External IP address', +'dnat address' => 'Firewall Interface', 'dns address deleted' => 'Successfully deleted!', 'dns address deleted txt' => 'The DNS-Server addresses have been successfully deleted.
You have to reboot or reconnect that the changes have effect!', 'dns address done' => 'The DNS-Server address settings are going to be saved.', @@ -834,6 +846,8 @@ 'end address' => 'End address:', 'enter ack class' => 'Enter the ACK- Class
and then press Save.', 'enter data' => 'Enter your settings
and then press Save.', +'entropy' => 'Entropy', +'entropy graphs' => 'Entropy Graphs', 'err bk 1' => 'Error creating archive', 'err bk 10 password' => 'Error with backup password', 'err bk 2 key' => 'Error creating key file', @@ -911,6 +925,7 @@ 'firewall logs' => 'Firewall Logs', 'firewall logs ip' => 'Fw-Loggraphs (IP)', 'firewall logs port' => 'Fw-Loggraphs (Port)', +'firewall logs country' => 'Fw-Loggraphs (Country)', 'firewall rules' => 'Firewall Rules', 'firewallhits' => 'firewallhits', 'firmware' => 'Firmware', @@ -918,6 +933,7 @@ 'fixed ip lease added' => 'Fixed IP lease added', 'fixed ip lease modified' => 'Fixed IP lease modified', 'fixed ip lease removed' => 'Fixed IP lease removed', +'flag' => 'Flag', 'force update' => 'Force update', 'force user' => 'force all new file to user', 'forward firewall' => 'Firewall', @@ -959,6 +975,8 @@ 'fwdfw delete' => 'Delete', 'fwdfw dnat' => 'Destination NAT (Port forwarding)', 'fwdfw dnat error' => 'You have to select a single host for DNAT. Groups or networks are not allowed.', +'fwdfw dnat extport' => 'The external port has to be empty when using Source NAT rules.', +'fwdfw dnat nochoice' => 'Please pick Source NAT or Destination NAT from the NAT section.', 'fwdfw dnat porterr' => 'You have to select a single port or portrange (tcp/udp) for NAT', 'fwdfw dnat porterr2' => 'Cannot use external port (NAT) when no destination port is defined.', 'fwdfw edit' => 'Edit', @@ -983,6 +1001,7 @@ 'fwdfw from' => 'From:', 'fwdfw hint ip1' => 'The last generated rule may never match, because source and destination subnets may overlap.', 'fwdfw hint ip2' => 'Please double-check if this rule makes sense: ', +'fwdfw hint mac' => 'The destination group contains MAC addresses, which will be skipped during rule creation.', 'fwdfw iface' => 'Interface', 'fwdfw ipsec network' => 'IPsec networks:', 'fwdfw log' => 'Log', @@ -1012,7 +1031,7 @@ 'fwdfw sourceip' => 'Source address (MAC/IP address or network):', 'fwdfw std network' => 'Standard networks:', 'fwdfw target' => 'Destination', -'fwdfw targetip' => 'Destination address (MAC/IP address or network):', +'fwdfw targetip' => 'Destination address (IP address or network):', 'fwdfw till' => 'Until:', 'fwdfw time' => 'Time Constraints', 'fwdfw timeframe' => 'Use time constraints', @@ -1022,6 +1041,7 @@ 'fwdfw use srcport' => 'Source port:', 'fwdfw use srv' => 'Destination port:', 'fwdfw useless rule' => 'This rule is useless.', +'fwdfw warn1' => 'This might lead to firewallrules which are applied to networks for which they are not intended to be.', 'fwdfw wd_fri' => 'Fri', 'fwdfw wd_mon' => 'Mon', 'fwdfw wd_sat' => 'Sat', @@ -1113,9 +1133,11 @@ 'g.lite' => 'TO BE REMOVED', 'gateway' => 'Gateway', 'gateway ip' => 'Gateway IP', +'gen dh' => 'Generate Diffie-Hellman key', 'gen static key' => 'Generate a static key', 'generate' => 'Generate root/host zertifikate', 'generate a certificate' => 'Generate a certificate:', +'generate dh key' => 'Generate Diffie-Hellman key', 'generate iso' => 'Generate ISO', 'generate root/host certificates' => 'Generate root/host certificates', 'generate tripwire keys and init' => 'generate tripwire keys and init', @@ -1150,6 +1172,7 @@ 'harddisk temperature' => 'Harddisk Temperature', 'harddisk temperature graphs' => 'HDD Graphs', 'hardware graphs' => 'Hardware Graphs', +'hardware support' => 'Hardware Support', 'hdd temperature in' => 'Harddisk temperature in', 'help' => 'Help', 'high' => 'High', @@ -1298,7 +1321,9 @@ 'ipfire side is invalid' => 'IPFire side is invalid.', 'ipfires hostname' => 'IPFire\'s Hostname', 'ipinfo' => 'IP info', +'ipsec' => 'IPsec', 'ipsec network' => 'IPsec network', +'ipsec no connections' => 'No active IPsec connections', 'iptable rules' => 'IPTable rules', 'iptmangles' => 'IPTable Mangles', 'iptnats' => 'IPTable Network Address Translation', @@ -1335,7 +1360,7 @@ 'local hard disk' => 'Hard disk', 'local master' => 'Local Master', 'local ntp server specified but not enabled' => 'Local NTP server specified but not enabled', -'local subnet' => 'Local Subnet:', +'local subnet' => 'Local subnet:', 'local subnet is invalid' => 'Local subnet is invalid.', 'local vpn hostname/ip' => 'Local VPN Hostname/IP', 'localkey' => 'Localkey', @@ -1385,6 +1410,7 @@ 'mac address saved txt' => 'The MAC address has been successfully saved, but changes will only take effect after reboot or reconnection.', 'mac address title' => 'Assign MAC Address', 'mac desc' => 'Here you are able to change the MAC address on red0. The address must be entered in hexadecimal (0-9,a-f), a valid entry is
e.g. 00-01-02-0e-b8-d6 or 00:01:02:0e:b8:d6.', +'mac filter' => 'MAC filter', 'mac new' => 'new MAC address:', 'mac1 new' => 'new MAC address 1 (vdsl-inet):', 'mac2 new' => 'new MAC address 2 (vdsl-iptv):', @@ -1411,6 +1437,7 @@ 'max size' => 'Max object size (KB):', 'max throughput' => 'Maximum throughput', 'maximal' => 'Maximal', +'maximum' => 'Maximum', 'maximum retries' => 'Maximum retries:', 'may' => 'May', 'mbmon display' => 'Display', @@ -1436,6 +1463,7 @@ 'min delay' => 'Minimum delay', 'min size' => 'Min object size (KB):', 'minimal' => 'Minimal', +'minimum' => 'Minimum', 'minute' => 'Minute', 'minutes' => 'Minutes', 'misc-options' => 'Miscellaneous options', @@ -1509,6 +1537,7 @@ 'network traffic graphs others' => 'Network (others)', 'network updated' => 'Custom Network updated', 'networks settings' => 'Firewall - Network settings', +'never' => 'Never', 'new optionsfw later' => 'Some options need a reboot to take effect', 'new optionsfw must boot' => 'You must reboot your IPFire', 'newer' => 'Newer', @@ -1520,6 +1549,7 @@ 'no eciadsl synch.bin file' => 'No ECI ADSL synch.bin file. Please upload.', 'no filter pass' => 'Enter the standard class for non-filtered packets.', 'no fritzdsl driver' => 'No Fritz!DSL driver. Please upload.', +'no hardware random number generator' => 'This system has no source for entropy.', 'no information available' => 'No information available.', 'no log selected' => 'No log selected', 'no modem selected' => 'No modem selected', @@ -1529,6 +1559,7 @@ 'nonetworkname' => 'No Network Name entered', 'noservicename' => 'No Service Name entered', 'not a valid ca certificate' => 'Not a valid CA certificate.', +'not a valid dh key' => 'Not a valid Diffie-Hellman key. Please use 1024, 2048, 3072 or 4096 bit in PKCS#3 format.', 'not enough disk space' => 'Not enough disk space', 'not present' => 'Not present', 'not running' => 'not running', @@ -1620,11 +1651,19 @@ 'ovpn' => 'OpenVPN', 'ovpn con stat' => 'OpenVPN Connection Statistics', 'ovpn config' => 'OVPN-Config', +'ovpn crypt options' => 'Cryptographic options', 'ovpn device' => 'OpenVPN device:', +'ovpn dh' => 'Diffie-Hellman key lenght', +'ovpn dh name' => 'Diffie-Hellman key name', 'ovpn dl' => 'OVPN-Config Download', +'ovpn engines' => 'Crypto engine', 'ovpn errmsg green already pushed' => 'Route for green network is always set', 'ovpn errmsg invalid ip or mask' => 'Invalid network-address or subnetmask', +'ovpn generating the root and host certificates' => 'Generating the root and host certifictae can take a long time.', +'ovpn ha' => 'Hash algorithm', +'ovpn hmac' => 'HMAC options', 'ovpn log' => 'OVPN-Log', +'ovpn mgmt in root range' => 'A port number of 1024 or higher is required.', 'ovpn mtu-disc' => 'Path MTU Discovery', 'ovpn mtu-disc and mtu not 1500' => 'Path MTU Discovery requires a MTU of 1500.', 'ovpn mtu-disc maybe' => 'Optionally', @@ -1632,13 +1671,16 @@ 'ovpn mtu-disc off' => 'Disabled', 'ovpn mtu-disc with mssfix or fragment' => 'Path MTU Discovery cannot be used with mssfix or fragment.', 'ovpn mtu-disc yes' => 'Forced', -'ovpn on blue' => 'OpenVPN on BLUE', -'ovpn on orange' => 'OpenVPN on ORANGE', -'ovpn on red' => 'OpenVPN on RED', +'ovpn no connections' => 'No active OpenVPN connections', +'ovpn on blue' => 'OpenVPN on BLUE:', +'ovpn on orange' => 'OpenVPN on ORANGE:', +'ovpn on red' => 'OpenVPN on RED:', +'ovpn port in root range' => 'A port number of 1024 or higher is required.', +'ovpn reneg sec' => 'Session key lifetime:', 'ovpn routes push' => 'Routes (one per line) e.g. 192.168.10.0/255.255.255.0 192.168.20.0/24', 'ovpn routes push options' => 'Route push options', 'ovpn server status' => 'Current OpenVPN server status:', -'ovpn subnet' => 'OpenVPN subnet (e.g. 10.0.10.0/255.255.255.0)', +'ovpn subnet' => 'OpenVPN subnet:', 'ovpn subnet is invalid' => 'OpenVPN subnet is invalid.', 'ovpn subnet overlap' => 'OpenVPN Subnet overlaps with : ', 'ovpn_fastio' => 'Fast-IO', @@ -1657,7 +1699,7 @@ 'ovpn_processprioVH' => 'Very high', 'ovpnstatus log' => 'OVPN-Status-Log', 'ovpnsys log' => 'OVPN-System-Log', -'p2p block' => 'P2P block', +'p2p block' => 'P2P networks', 'p2p block save notice' => 'Please reload the firewall ruleset in order to apply your changes.', 'package failed to install' => 'Package failed to install.', 'pagerefresh' => 'Page is beeing refreshed, please wait.', @@ -1739,7 +1781,7 @@ 'profile saved' => 'Profile saved: ', 'profiles' => 'Profiles:', 'proto' => 'Proto', -'protocol' => 'Protocol', +'protocol' => 'Protocol:', 'proxy' => 'Proxy', 'proxy access graphs' => 'Proxy access graphs', 'proxy admin password' => 'Cache administrator password', @@ -1813,7 +1855,7 @@ 'resetglobals' => 'Reset global settings', 'resetpolicy' => 'Reset policy to default', 'resetshares' => 'Reset shares?', -'resetting the vpn configuration will remove the root ca, the host certificate and all certificate based connections' => 'Resetting the VPN configuration will remove the root CA, the host certificate and all certificate based connections', +'resetting the vpn configuration will remove the root ca, the host certificate and all certificate based connections' => 'Resetting the X509 remove the root CA, the host certificate and all certificate based connections.', 'restart' => 'Restart', 'restart ovpn server' => 'Restart OpenVPN server', 'restore' => 'Restore', @@ -1885,6 +1927,7 @@ 'show ca certificate' => 'Show CA certificate', 'show certificate' => 'Show certificate', 'show crl' => 'Show certificate revocation list', +'show dh' => 'Show Diffie-Hellman key', 'show host certificate' => 'Show host certificate', 'show last x lines' => 'Show last x lines', 'show lines' => 'Show lines', @@ -1922,6 +1965,7 @@ 'source ip' => 'Source IP', 'source ip and port' => 'Source IP: Port', 'source ip bad' => 'Not a valid IP address or a network address.', +'source ip country' => 'Source IP Country', 'source ip in use' => 'Source IP in use:', 'source ip or net' => 'Source IP or Net', 'source net' => 'Source Net', @@ -1993,6 +2037,8 @@ 'swap usage per' => 'Swap usage per', 'system' => 'System', 'system graphs' => 'System Graphs', +'system has hwrng' => 'This system has got a hardware random number generator.', +'system has rdrand' => 'This system has got support for Intel(R) RDRAND.', 'system information' => 'System Information', 'system log viewer' => 'System Log Viewer', 'system logs' => 'System Logs', @@ -2220,6 +2266,7 @@ 'upload a certificate' => 'Upload a certificate:', 'upload a certificate request' => 'Upload a certificate request:', 'upload ca certificate' => 'Upload CA certificate', +'upload dh key' => 'Upload Diffie-Hellman key', 'upload fcdsl.o' => 'TO BE REMOVED', 'upload file' => 'Upload file', 'upload new ruleset' => 'Upload new ruleset', @@ -2470,7 +2517,6 @@ 'vpn aggrmode' => 'IKE aggressive mode allowed. Avoid if possible (preshared key is transmitted in clear text)!', 'vpn altname syntax' => 'SubjectAltName is a comma separated list of e-mail, dns, uri, rid and ip objects.
email:an email address. Syntax email:copy takes the email field from the cert to be used.
DNS:a valid domain name.
URI:any valid uri.
RID:registered object identifier.
IP:an IP address.
Note:charset is limited and case is significant.
Example:
e-mail:ipfire@foo.org,email:copy,DNS:www.ipfire.org,IP:127.0.0.1,URI:http://url/to/something', 'vpn auth-dn' => 'Peer is identified by either IPV4_ADDR, FQDN, USER_FQDN or DER_ASN1_DN string in remote ID field', -'vpn configuration main' => 'VPN Configuration', 'vpn delayed start' => 'Delay before launching VPN (seconds)', 'vpn delayed start help' => 'If required, this delay can be used to allow dynamic DNS updates to propagate properly. 60 is a common value when RED is a dynamic IP.', 'vpn incompatible use of defaultroute' => 'hostname=%defaultroute not allowed', @@ -2540,6 +2586,7 @@ 'wlan client wpa mode ccmp ccmp' => 'CCMP-CCMP', 'wlan client wpa mode ccmp tkip' => 'CCMP-TKIP', 'wlan client wpa mode tkip tkip' => 'TKIP-TKIP', +'wlan clients' => 'Wireless clients', 'wlanap access point' => 'Access Point', 'wlanap channel' => 'Channel', 'wlanap country' => 'Country Code',