X-Git-Url: http://git.ipfire.org/?p=people%2Fteissler%2Fipfire-2.x.git;a=blobdiff_plain;f=src%2Finitscripts%2Finit.d%2Fnetworking%2Fred;h=28df551038efaa9dae66e6cae0f1b8f5a7f87a81;hp=caa857263ddc9c3e844d7d1ca502456bcfc83d08;hb=463f9edeb2034b0e0a360f372b9752cc1a0540cf;hpb=5aae218d5886edbecce580ac40520525e8945e2c

diff --git a/src/initscripts/init.d/networking/red b/src/initscripts/init.d/networking/red
index caa857263..28df55103 100644
--- a/src/initscripts/init.d/networking/red
+++ b/src/initscripts/init.d/networking/red
@@ -17,7 +17,24 @@
 
 . /etc/sysconfig/rc 
 . ${rc_functions}
+. /etc/init.d/networking/functions.network
+
+#Define some defaults
+INET_VLAN=7
+IPTV_VLAN=8
+
+eval $(/usr/local/bin/readhash /var/ipfire/main/settings)
+if [ "$RRDLOG" == "" ]; then
+	RRDLOG=/var/log/rrd
+fi
+
 eval $(/usr/local/bin/readhash /var/ipfire/ethernet/settings)
+eval $(/usr/local/bin/readhash /var/ipfire/dns/settings)
+eval $(/usr/local/bin/readhash /var/ipfire/mac/settings)
+
+MAC=$(tr - : <<<$MAC)
+MAC1=$(tr - : <<<$MAC1)
+MAC2=$(tr - : <<<$MAC2)
 
 TYPE="${RED_TYPE}"
 DEVICE="${RED_DEV}"
@@ -59,14 +76,6 @@ if [ "${TYPE}" == "STATIC" ]; then
 		echo_failure
 		exit 1
 	fi
-	
-elif [ "${TYPE}" == "DHCP" ]; then
-
-	PIDFILE="/var/run/dhcpcd-${DEVICE}.pid"
-	LEASEINFO="/var/ipfire/dhcpc/dhcpcd-${DEVICE}.info"
-	DHCP_START="-N -R -L /var/ipfire/dhcpc -c /var/ipfire/dhcpc/dhcpcd.exe "
-	DHCP_STOP="-k -c /var/ipfire/dhcpc/dhcpcd.exe "
-
 fi
 
 case "${1}" in
@@ -79,6 +88,11 @@ case "${1}" in
 				link_status=`ip link show ${DEVICE} 2> /dev/null`
 				if [ -n "${link_status}" ]; then
 					if ! echo "${link_status}" | grep -q UP; then
+						if [ -n "$MAC" ]; then
+							boot_mesg "Setting mac address on ${DEVICE} to ${MAC}"	
+							ip link set dev ${DEVICE} address ${MAC}
+							evaluate_retval
+						fi
 						ip link set ${DEVICE} up
 					fi
 				fi
@@ -102,8 +116,8 @@ case "${1}" in
 			echo -n "${DEVICE}" > /var/ipfire/red/iface
 			echo -n "${ADDRESS}"  > /var/ipfire/red/local-ipaddress
 			echo -n "${GATEWAY}" > /var/ipfire/red/remote-ipaddress
-			grep -v "gateway" /etc/hosts > /tmp/hosts
-			echo "$GATEWAY gateway"  >> /tmp/hosts
+			grep -v -E "\<gateway\>" /etc/hosts > /tmp/hosts
+			echo "$GATEWAY	gateway"  >> /tmp/hosts
 			mv /tmp/hosts /etc/hosts
 			echo -n "${DNS1}" > /var/ipfire/red/dns1
 			echo -n "${DNS2}" > /var/ipfire/red/dns2
@@ -114,72 +128,31 @@ case "${1}" in
 			evaluate_retval
 			
 			run_subdir ${rc_base}/init.d/networking/red.up/
-			
+
+			# Configure aliases only if red static
+			/usr/local/bin/setaliases
+
 		elif [ "${TYPE}" == "DHCP" ]; then
-			boot_mesg -n "Starting dhcpcd on the ${DEVICE} interface..."		
+			# Add firewall rules to allow comunication with the dhcp server on red.
+			iptables -A REDINPUT -p tcp --source-port 67 --destination-port 68 -i ${DEVICE} -j ACCEPT
+			iptables -A REDINPUT -p udp --source-port 67 --destination-port 68 -i ${DEVICE} -j ACCEPT
+
 			echo -n "${DEVICE}" > /var/ipfire/red/iface
 
+			# Check if the wlan-client is used on red.
+			# To determine this we check if a wpa_supplicant is running.
+			pid="$(pidof wpa_supplicant)"
+
+			if [ -z "${pid}" ]; then
+				# No wpa_supplicant is running. So it's save to start dhcpcd.
+				dhcpcd_start "${DEVICE}"
+			fi
+
 			## Create & Enable vnstat
 			/usr/bin/vnstat -u -i ${DEVICE} -r --enable --force > /dev/null 2>&1
 
-			# Test to see if there is a stale pid file
-			if [ -f "$PIDFILE" ]; then
-				ps `cat "$PIDFILE"` | grep dhcpcd > /dev/null
-				if [ $? != 0 ]; then
-					rm -f /var/run/dhcpcd-${DEVICE}.pid > /dev/null
-				else
-					boot_mesg "dhcpcd already running!" ${WARNING}
-					echo_warning
-					exit 2
-				fi
-			fi
-			
-			iptables -A REDINPUT -p tcp --source-port 67 --destination-port 68 -i ${DEVICE} -j ACCEPT
-			iptables -A REDINPUT -p udp --source-port 67 --destination-port 68 -i ${DEVICE} -j ACCEPT
-			
-			if [ -n "${RED_DHCP_HOSTNAME}" ]; then
-				DHCP_START+="-h ${RED_DHCP_HOSTNAME} "
-	  	fi
-	  	
-	  	/sbin/dhcpcd ${DEVICE} ${DHCP_START} >/dev/null 2>&1
-	  	RET="$?"
-	  	
-	  	if [ "$RET" = "0" ]; then
-				. /var/ipfire/dhcpc/dhcpcd-${DEVICE}.info
-				echo ""
-				echo_ok
-				boot_mesg "           DHCP Assigned Settings for ${DEVICE}:"
-				boot_mesg_flush
-				boot_mesg "           IP Address:      $IPADDR"
-				boot_mesg_flush
-				if [ -n "${RED_DHCP_HOSTNAME}" ]; then
-					boot_mesg "           Hostname:        $RED_DHCP_HOSTNAME"
-					boot_mesg_flush
-				fi
-				boot_mesg "           Subnet Mask:     $NETMASK"
-				boot_mesg_flush
-				boot_mesg "           Default Gateway: $GATEWAY"
-				boot_mesg_flush
-				boot_mesg "           DNS Server:      $DNS"
-				boot_mesg_flush
-				
-				echo -n `/etc/rc.d/helper/getdnsfromdhcpc.pl 1` > /var/ipfire/red/dns1
-				echo -n `/etc/rc.d/helper/getdnsfromdhcpc.pl 2` > /var/ipfire/red/dns2
-
-				. /var/ipfire/dhcpc/dhcpcd-${DEVICE}.info
-				echo "$IPADDR"  > /var/ipfire/red/local-ipaddress
-				grep -v "gateway" /etc/hosts > /tmp/hosts
-				echo "$GATEWAY gateway"  >> /tmp/hosts
-				mv /tmp/hosts /etc/hosts
-				echo "$GATEWAY" > /var/ipfire/red/remote-ipaddress
-			else
-				echo ""
-				$(exit "$RET")
-				evaluate_retval
-			fi
-		
 		elif [ "$TYPE" == "PPPOE" ]; then
-			
+
 			if ( ps ax | grep -q [p]ppd ); then 
 			    boot_mesg "pppd is still running." ${FAILURE}
 			    echo_failure
@@ -189,11 +162,16 @@ case "${1}" in
 			eval $(/usr/local/bin/readhash /var/ipfire/ppp/settings)
 			
 			[ -c "/dev/ppp" ] || mknod /dev/ppp c 108 0
-			
+
+			# We force the plugin method, anyway.
+			METHOD="PPPOE_PLUGIN"
+
 			PPP_NIC=${DEVICE}
-			
+
+
 			if [ "$TYPE" == "pppoeatm" ] || [ "$TYPE" == "pptpatm" ]; then
 				PPP_NIC=nas0		
+				DEVICE=nas0
 				boot_mesg "Createing ATM-Bridge as $PPP_NIC ..."
 				br2684ctl -c0 -e${ENCAP} -a0.${VPI}.${VCI} >/dev/null 2>&1 &
 				sleep 1
@@ -204,6 +182,69 @@ case "${1}" in
 					TYPE="pptp"
 				fi
 			fi
+
+			if [ "$TYPE" == "vdsl" ]; then
+				boot_mesg "Createing VLAN Interface ${DEVICE}.${INET_VLAN} ..."
+				modprobe 8021q
+				vconfig add ${DEVICE} ${INET_VLAN}
+				if [ -n "$MAC1" ]; then
+					boot_mesg "Setting mac address on ${DEVICE}.${INET_VLAN} to ${MAC1}"	
+					ip link set dev ${DEVICE}.${INET_VLAN} address ${MAC1}
+					evaluate_retval
+				fi
+				PPP_NIC=${DEVICE}.${INET_VLAN}
+				sleep 0.2
+				ip link set ${PPP_NIC} up
+				TYPE="pppoe"
+			fi
+			if [ "${IPTV}" == "enable" ]; then
+				PIDFILE="/var/run/dhcpcd-${DEVICE}.${IPTV_VLAN}.pid"
+				LEASEINFO="/var/ipfire/dhcpc/dhcpcd-${DEVICE}.${IPTV_VLAN}.info"
+				# Test to see if there is a stale pid file
+				if [ -f "$PIDFILE" ]; then
+					ps `cat "$PIDFILE"` | grep dhcpcd > /dev/null
+					if [ $? != 0 ]; then
+						rm -f /var/run/dhcpcd-${DEVICE}.${IPTV_VLAN}.pid > /dev/null
+					fi
+				fi
+
+				if [ ! -f "$PIDFILE" ]; then
+					boot_mesg "Createing VLAN Interface ${DEVICE}.${IPTV_VLAN} ..."
+					modprobe 8021q
+					vconfig add ${DEVICE} ${IPTV_VLAN}
+					if [ -n "$MAC2" ]; then
+						boot_mesg "Setting mac address on ${DEVICE}.${IPTV_VLAN} to ${MAC2}"	
+						ip link set dev ${DEVICE}.${IPTV_VLAN} address ${MAC2}
+						evaluate_retval
+					fi
+					boot_mesg -n "Starting dhcpcd on the ${DEVICE}.${IPTV_VLAN} interface..."
+					/sbin/dhcpcd ${DEVICE}.${IPTV_VLAN} ${DHCP_START} >/dev/null 2>&1
+					RET="$?"
+
+					if [ "$RET" = "0" ]; then
+						. /var/ipfire/dhcpc/dhcpcd-${DEVICE}.${IPTV_VLAN}.info
+						echo ""
+						echo_ok
+						boot_mesg "           DHCP Assigned Settings for ${DEVICE}.${IPTV_VLAN}:"
+						boot_mesg_flush
+						boot_mesg "           IP Address:      $ip_address"
+						boot_mesg_flush
+						boot_mesg "           Hostname:        $RED_DHCP_HOSTNAME"
+						boot_mesg_flush
+						boot_mesg "           Subnet Mask:     $subnet_mask"
+						boot_mesg_flush
+						boot_mesg "           Default Gateway: $routers"
+						boot_mesg_flush
+						boot_mesg "           DNS Server:      $domain_name_servers"
+						boot_mesg_flush
+
+					else
+						echo ""
+						$(exit "$RET")
+						evaluate_retval
+					fi
+				fi
+			fi
 			if [ "$TYPE" == "pppoe" ] || [ "$TYPE" == "pptp" ]; then
 				if [ "$PPP_NIC" == "" ]; then
 					boot_mesg "No device for red interface given. Check netsetup or dialprofile!" ${FAILURE}
@@ -213,9 +254,52 @@ case "${1}" in
 				boot_mesg "Bringing up the $TYPE interface on $PPP_NIC ..."
 				ip addr flush dev $PPP_NIC >/dev/null 2>&1
 				if [ "$TYPE" == "pptp" ]; then
-					ip addr add $PPTP_NICCFG dev $PPP_NIC
+					if [ "$PPTP_NICCFG" == "dhcp" ]; then
+						# Test to see if there is a stale pid file
+						if [ -f "$PIDFILE" ]; then
+							ps `cat "$PIDFILE"` | grep dhcpcd > /dev/null
+							if [ $? != 0 ]; then
+								rm -f /var/run/dhcpcd-${DEVICE}.pid > /dev/null
+							fi
+						fi
+
+						if [ ! -f "$PIDFILE" ]; then
+							boot_mesg -n "Starting dhcpcd on the ${DEVICE} interface..."
+							/sbin/dhcpcd ${DEVICE} ${DHCP_START} >/dev/null 2>&1
+							RET="$?"
+
+							if [ "$RET" = "0" ]; then
+								. /var/ipfire/dhcpc/dhcpcd-${DEVICE}.info
+								echo ""
+								echo_ok
+								boot_mesg "           DHCP Assigned Settings for ${DEVICE}:"
+								boot_mesg_flush
+								boot_mesg "           IP Address:      $ip_address"
+								boot_mesg_flush
+								boot_mesg "           Hostname:        $RED_DHCP_HOSTNAME"
+								boot_mesg_flush
+								boot_mesg "           Subnet Mask:     $subnet_mask"
+								boot_mesg_flush
+								boot_mesg "           Default Gateway: $routers"
+								boot_mesg_flush
+								boot_mesg "           DNS Server:      $domain_name_servers"
+								boot_mesg_flush
+								/sbin/route add $PPTP_PEER gw $routers $PPP_NIC
+							else
+								echo ""
+								$(exit "$RET")
+								evaluate_retval
+							fi
+						fi
+					else
+						ip addr add $PPTP_NICCFG dev $PPP_NIC
+					fi
 				fi
 				ip link set ${PPP_NIC} up
+				if [ -n "${PPTP_ROUTE}" ]; then
+					boot_mesg "Set route ${PPTP_ROUTE} to pptp server..."
+					route add ${PPTP_ROUTE}
+				fi
 			else
 				boot_mesg "Bringing up the PPP via ${TYPE} on ${COMPORT}..."
 			fi
@@ -228,7 +312,7 @@ case "${1}" in
 			#			
 			if [ "$TYPE" == "pppoe" ]; then
 				[ "${METHOD}" == "PPPOE_PLUGIN" ] && \
-					PLUGOPTS="plugin /usr/lib/pppd/2.4.4/rp-pppoe.so"
+					PLUGOPTS="plugin rp-pppoe.so"
 			fi
 
 			### Synchronous Mode
@@ -295,17 +379,27 @@ case "${1}" in
 			
 			if [ "$TYPE" == "modem" ]; then
 				PLUGOPTS=" /dev/${COMPORT} ${DTERATE} connect /etc/ppp/dialer lock modem crtscts"
+				METHOD="PPPOE_PLUGIN"
 			elif [ "$TYPE" == "serial" ]; then
 				PLUGOPTS=" /dev/${COMPORT} ${DTERATE} connect /bin/true lock modem crtscts"
+				METHOD="PPPOE_PLUGIN"
 			fi
 		
 			### Standard PPP options we always use
 			#
 			PPP_STD_OPTIONS="$PLUGOPTS $DNS defaultroute noipdefault noauth"
-			PPP_STD_OPTIONS+=" default-asyncmap hide-password nodetach mtu ${MTU}"
-			PPP_STD_OPTIONS+=" mru ${MTU} noaccomp nodeflate nopcomp novj novjccomp"
+			PPP_STD_OPTIONS+=" default-asyncmap hide-password nodetach"
+			PPP_STD_OPTIONS+=" noaccomp nodeflate nopcomp novj novjccomp"
 			PPP_STD_OPTIONS+=" nobsdcomp user ${USERNAME} lcp-echo-interval 20"
-			PPP_STD_OPTIONS+=" lcp-echo-failure 3 ${AUTH}"
+			PPP_STD_OPTIONS+=" lcp-echo-failure 5 ${AUTH}"
+
+			if [ -n "${MTU}" ]; then
+				PPP_STD_OPTIONS="${PPP_STD_OPTIONS} mtu ${MTU}"
+			fi
+
+			if [ -n "${MRU}" ]; then
+				PPP_STD_OPTIONS="${PPP_STD_OPTIONS} mru ${MRU}"
+			fi
 				
 			### Debugging
 			#
@@ -326,11 +420,12 @@ case "${1}" in
 			#
 			if [ "$TYPE" == "pptp" ]; then
 				PPPOE_CMD="pptp $PPTP_PEER --nolaunchpppd"
+				METHOD=""
 			fi
 			
 			### Run everything
 			#
-			if [ "${METHOD}" == "PPPOE_PLUGIN" ]; then
+			if [ "$METHOD" == "PPPOE_PLUGIN" ]; then
 				/usr/sbin/pppd $PPP_STD_OPTIONS $DEBUG $DEMAND >/dev/null 2>&1 &
 				evaluate_retval
 				# echo PLUGIN: /usr/sbin/pppd $PPP_STD_OPTIONS $DEBUG $DEMAND
@@ -342,7 +437,10 @@ case "${1}" in
 			## Create & Enable vnstat
 			/usr/bin/vnstat -u -i ppp0 -r --enable --force > /dev/null 2>&1
 			/etc/rc.d/init.d/connectd start
-
+			# Add a NaN value to ppp0 rrd to supress spikes at reconnect
+			rrdtool update $RRDLOG/collectd/localhost/interface/if_octets-ppp0.rrd \
+				$(date +%s):: > /dev/null 2>&1
+			exit 0
 		fi
 		;;
 
@@ -358,39 +456,6 @@ case "${1}" in
 			fi
 			run_subdir ${rc_base}/init.d/networking/red.down/
 
-		elif [ "$TYPE" == "DHCP" ]; then
-			boot_mesg -n "Stopping dhcpcd on the ${DEVICE} interface..."
-			if [ -e $LEASEINFO ]; then
-				. $LEASEINFO
-				if [ "$LEASETIME" = "4294967295" ]; then
-					# do nothing, just echo ok
-					echo ""
-					echo_ok
-				else
-					if [ -n "$DHCP_STOP" ]; then
-						/sbin/dhcpcd ${DEVICE} $DHCP_STOP &> /dev/null
-						RET="$?"
-						if [ "$RET" -eq 0 ]; then
-							echo ""
-							echo_ok
-						elif [ "$RET" -eq 1 ]; then
-							boot_mesg "dhcpcd not running!" ${WARNING}
-							echo_warning
-						else
-							echo ""
-							echo_failure
-						fi
-					else
-						echo ""
-						killproc dhcpcd
-					fi
-		    fi
-			else
-				boot_mesg -n "LEASEINFO Test failed! - " ${WARNING}
-				boot_mesg "dhcpcd is not running!" ${WARNING}
-				echo_warning
-			fi
-
 		elif [ "$TYPE" == "PPPOE" ]; then
 			boot_mesg "Bringing down the PPP interface ..."
 			## Disable vnstat collection
@@ -398,16 +463,43 @@ case "${1}" in
 			rm -f /var/ipfire/red/keepconnected
 			killall -w -s TERM /usr/sbin/pppd 2>/dev/null
 			evaluate_retval
+			# Add a NaN value to ppp0 rrd to supress spikes at reconnect
+			rrdtool update $RRDLOG/collectd/localhost/interface/if_octets-ppp0.rrd \
+				$(date +%s):: > /dev/null 2>&1
+
+		elif [ "$TYPE" == "DHCP" ]; then
+			# Check if the wlan-client is used on red.
+                        # To determine this we check if a wpa_supplicant is running.
+                        pid="$(pidof wpa_supplicant)"
+
+                        if [ -z "${pid}" ]; then
+				# Stop dhcpcd.
+				dhcpcd_stop "${DEVICE}"
+			fi
+		fi
+
+		if [ -n "${PPTP_ROUTE}" ]; then
+			route del ${PPTP_ROUTE}
 		fi
 
 		if [ "$DEVICE" != "${GREEN_DEV}" ] && [ "$DEVICE" != "" ]; then
-			link_status=`ip link show $DEVICE 2> /dev/null`
+			link_status=`ip link show $DEVICE.${INET_VLAN} 2> /dev/null`
 			if [ -n "${link_status}" ]; then
 				if echo "${link_status}" | grep -q UP; then
-					boot_mesg "Bringing down the ${DEVICE} interface..."
-					ip link set ${DEVICE} down
+					boot_mesg "Bringing down the ${DEVICE}.${INET_VLAN} interface..."
+					ip link set ${DEVICE}.${INET_VLAN} down
+					vconfig rem ${DEVICE}.${INET_VLAN}
 					evaluate_retval
 				fi
+			else
+				link_status=`ip link show $DEVICE 2> /dev/null`
+				if [ -n "${link_status}" ]; then
+					if echo "${link_status}" | grep -q UP; then
+						boot_mesg "Bringing down the ${DEVICE} interface..."
+						ip link set ${DEVICE} down
+						evaluate_retval
+					fi
+				fi
 			fi
 		fi
 		killall -w -s KILL /usr/sbin/pppd >/dev/null 2>&1