tty5
tty6
ttyAMA0
+ttyO2
ttyS0
ttyS1
ttyS2
kernel.printk = 1 4 1 7
vm.swappiness=0
vm.mmap_min_addr = 4096
+vm.min_free_kbytes = 8192
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.45
-# Sat Oct 15 08:52:52 2011
+# Linux kernel version: 2.6.32.59-ipfire-kirkwood
+# Sat Mar 31 11:04:12 2012
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_MACH_GURUPLUG=y
CONFIG_MACH_TS219=y
CONFIG_MACH_OPENRD_BASE=y
+CONFIG_MACH_ICONNECT=y
CONFIG_MACH_NAS6210=y
CONFIG_PLAT_ORION=y
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_E100=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
-CONFIG_NVRAM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
-CONFIG_I2C=m
+CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=m
-CONFIG_I2C_MV64XXX=m
+CONFIG_I2C_MV64XXX=y
CONFIG_I2C_OCORES=m
CONFIG_I2C_SIMTEC=m
CONFIG_HTC_PASIC3=m
# CONFIG_UCB1400_CORE is not set
CONFIG_TPS65010=m
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
CONFIG_MFD_WM8400=m
CONFIG_MFD_WM831X=m
CONFIG_MFD_WM8350=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
+CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
-CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_SSB=y
+CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_CS is not set
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
# CONFIG_USB_MUSB_HDRC is not set
#
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-CONFIG_RTC_DRV_TEST=m
+# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_DS1374=m
-CONFIG_RTC_DRV_DS1672=m
-CONFIG_RTC_DRV_MAX6900=m
-CONFIG_RTC_DRV_RS5C372=m
-CONFIG_RTC_DRV_ISL1208=m
-CONFIG_RTC_DRV_X1205=m
-CONFIG_RTC_DRV_PCF8563=m
-CONFIG_RTC_DRV_PCF8583=m
-CONFIG_RTC_DRV_M41T80=m
-# CONFIG_RTC_DRV_M41T80_WDT is not set
-CONFIG_RTC_DRV_S35390A=m
-CONFIG_RTC_DRV_FM3130=m
-CONFIG_RTC_DRV_RX8581=m
-CONFIG_RTC_DRV_RX8025=m
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
# Platform RTC drivers
#
-CONFIG_RTC_DRV_CMOS=m
-CONFIG_RTC_DRV_DS1286=m
-CONFIG_RTC_DRV_DS1511=m
-CONFIG_RTC_DRV_DS1553=m
-CONFIG_RTC_DRV_DS1742=m
-CONFIG_RTC_DRV_STK17TA8=m
-CONFIG_RTC_DRV_M48T86=m
-CONFIG_RTC_DRV_M48T35=m
-CONFIG_RTC_DRV_M48T59=m
-CONFIG_RTC_DRV_BQ4802=m
-CONFIG_RTC_DRV_V3020=m
-CONFIG_RTC_DRV_WM831X=m
-CONFIG_RTC_DRV_WM8350=m
-CONFIG_RTC_DRV_PCF50633=m
-CONFIG_RTC_DRV_AB3100=m
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_WM831X is not set
+# CONFIG_RTC_DRV_WM8350 is not set
+# CONFIG_RTC_DRV_PCF50633 is not set
+# CONFIG_RTC_DRV_AB3100 is not set
#
# on-CPU RTC drivers
#
-CONFIG_RTC_DRV_MV=m
+CONFIG_RTC_DRV_MV=y
CONFIG_DMADEVICES=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
+CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_MV_CESA is not set
+CONFIG_CRYPTO_DEV_MV_CESA=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
# CONFIG_BINARY_PRINTF is not set
--- /dev/null
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/arm 3.2.21 Kernel Configuration
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_HAVE_SCHED_CLOCK=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_SPARSE_IRQ=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_RCU_FAST_NO_HZ=y
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=19
+# CONFIG_CGROUPS is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EXPERT=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PADATA=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_HIGHBANK is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_PRIMA2 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PICOXCELL is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+# CONFIG_ARCH_ZYNQ is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+
+#
+# TI OMAP Common Features
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_DEBUG_DEVICES=y
+CONFIG_OMAP_DEBUG_LEDS=y
+# CONFIG_OMAP_SMARTREFLEX is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# TI OMAP2/3/4 Specific Features
+#
+CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
+CONFIG_ARCH_OMAP2=y
+CONFIG_ARCH_OMAP3=y
+CONFIG_ARCH_OMAP4=y
+
+#
+# OMAP Core Type
+#
+CONFIG_SOC_OMAP2420=y
+CONFIG_SOC_OMAP2430=y
+CONFIG_SOC_OMAP3430=y
+CONFIG_SOC_OMAPTI816X=y
+CONFIG_OMAP_PACKAGE_ZAF=y
+CONFIG_OMAP_PACKAGE_ZAC=y
+CONFIG_OMAP_PACKAGE_CBB=y
+CONFIG_OMAP_PACKAGE_CUS=y
+CONFIG_OMAP_PACKAGE_CBP=y
+CONFIG_OMAP_PACKAGE_CBL=y
+CONFIG_OMAP_PACKAGE_CBS=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_H4=y
+CONFIG_MACH_OMAP_APOLLON=y
+CONFIG_MACH_OMAP_2430SDP=y
+CONFIG_MACH_OMAP3_BEAGLE=y
+CONFIG_MACH_DEVKIT8000=y
+CONFIG_MACH_OMAP_LDP=y
+CONFIG_MACH_OMAP3530_LV_SOM=y
+CONFIG_MACH_OMAP3_TORPEDO=y
+CONFIG_MACH_OVERO=y
+CONFIG_MACH_OMAP3EVM=y
+CONFIG_MACH_OMAP3517EVM=y
+# CONFIG_MACH_CRANEBOARD is not set
+CONFIG_MACH_OMAP3_PANDORA=y
+CONFIG_MACH_OMAP3_TOUCHBOOK=y
+CONFIG_MACH_OMAP_3430SDP=y
+# CONFIG_MACH_NOKIA_N8X0 is not set
+CONFIG_MACH_NOKIA_RM680=y
+CONFIG_MACH_NOKIA_RX51=y
+CONFIG_MACH_OMAP_ZOOM2=y
+CONFIG_MACH_OMAP_ZOOM3=y
+CONFIG_MACH_CM_T35=y
+CONFIG_MACH_CM_T3517=y
+CONFIG_MACH_CM_T3730=y
+CONFIG_MACH_IGEP0020=y
+CONFIG_MACH_IGEP0030=y
+CONFIG_MACH_SBC3530=y
+CONFIG_MACH_OMAP_3630SDP=y
+CONFIG_MACH_TI8168EVM=y
+CONFIG_MACH_OMAP_4430SDP=y
+CONFIG_MACH_OMAP4_PANDA=y
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_CACHE_L2X0=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+# CONFIG_ARM_ERRATA_326103 is not set
+CONFIG_ARM_ERRATA_411920=y
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_458693=y
+CONFIG_ARM_ERRATA_460075=y
+# CONFIG_ARM_ERRATA_742230 is not set
+CONFIG_ARM_ERRATA_742231=y
+CONFIG_PL310_ERRATA_588369=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_PL310_ERRATA_727915=y
+CONFIG_ARM_ERRATA_743622=y
+# CONFIG_ARM_ERRATA_751472 is not set
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_754327=y
+CONFIG_ARM_ERRATA_764369=y
+CONFIG_PL310_ERRATA_769419=y
+CONFIG_ARM_GIC=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_ARM_CPU_TOPOLOGY=y
+CONFIG_SCHED_MC=y
+CONFIG_SCHED_SMT=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_NR_CPUS=8
+CONFIG_HOTPLUG_CPU=y
+CONFIG_LOCAL_TIMERS=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_CLEANCACHE is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_USE_OF=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+# CONFIG_ARM_APPENDED_DTB is not set
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_HAS_OPP=y
+CONFIG_PM_OPP=y
+CONFIG_PM_CLK=y
+CONFIG_CPU_PM=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_DEFAULT_RENO=y
+CONFIG_DEFAULT_TCP_CONG="reno"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+# CONFIG_IPV6_SUBTREES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_ZONES is not set
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_IMQ=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_LAYER7=m
+# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+# CONFIG_IP_VS_PROTO_TCP is not set
+# CONFIG_IP_VS_PROTO_UDP is not set
+# CONFIG_IP_VS_PROTO_AH_ESP is not set
+# CONFIG_IP_VS_PROTO_ESP is not set
+# CONFIG_IP_VS_PROTO_AH is not set
+# CONFIG_IP_VS_PROTO_SCTP is not set
+
+#
+# IPVS scheduler
+#
+# CONFIG_IP_VS_RR is not set
+# CONFIG_IP_VS_WRR is not set
+# CONFIG_IP_VS_LC is not set
+# CONFIG_IP_VS_WLC is not set
+# CONFIG_IP_VS_LBLC is not set
+# CONFIG_IP_VS_LBLCR is not set
+# CONFIG_IP_VS_DH is not set
+# CONFIG_IP_VS_SH is not set
+# CONFIG_IP_VS_SED is not set
+# CONFIG_IP_VS_NQ is not set
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_NFCT=y
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_IP_NF_MATCH_IPP2P=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_LANE is not set
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_TAG_DSA=y
+CONFIG_NET_DSA_TAG_EDSA=y
+CONFIG_NET_DSA_TAG_TRAILER=y
+CONFIG_NET_DSA_MV88E6XXX=y
+CONFIG_NET_DSA_MV88E6060=y
+CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
+CONFIG_NET_DSA_MV88E6131=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+# CONFIG_BT_L2CAP is not set
+# CONFIG_BT_SCO is not set
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEFAULT_PS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_RFKILL_GPIO=m
+# CONFIG_NET_9P is not set
+CONFIG_CAIF=m
+# CONFIG_CAIF_DEBUG is not set
+CONFIG_CAIF_NETDEV=m
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+# CONFIG_NFC is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+CONFIG_MTD_OF_PARTS=m
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+CONFIG_SM_FTL=m
+# CONFIG_MTD_OOPS is not set
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_DOCG3 is not set
+CONFIG_MTD_NAND_ECC=m
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_DTC=y
+CONFIG_OF=y
+
+#
+# Device Tree and Open Firmware support
+#
+CONFIG_PROC_DEVICETREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+CONFIG_OF_NET=y
+CONFIG_OF_MDIO=y
+CONFIG_PARPORT=m
+# CONFIG_PARPORT_PC is not set
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_DRBD is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=8
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MG_DISK=m
+CONFIG_MG_DISK_RES=0
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ATMEL_PWM is not set
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+# CONFIG_APDS9802ALS is not set
+CONFIG_ISL29003=m
+# CONFIG_ISL29020 is not set
+CONFIG_SENSORS_TSL2550=m
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+CONFIG_DS1682=m
+# CONFIG_BMP085 is not set
+# CONFIG_USB_SWITCH_FSA9480 is not set
+CONFIG_C2PORT=m
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+# CONFIG_SENSORS_LIS3_I2C is not set
+
+#
+# Altera FPGA firmware download module
+#
+# CONFIG_ALTERA_STAPL is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=m
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_LIBFC=m
+CONFIG_LIBFCOE=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI_PLATFORM=m
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_SATA_MV=m
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ARASAN_CF=m
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_PLATFORM=m
+CONFIG_PATA_OF_PLATFORM=m
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_DELAY=m
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+# CONFIG_TARGET_CORE is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_IMQ=m
+# CONFIG_IMQ_BEHAVIOR_AA is not set
+CONFIG_IMQ_BEHAVIOR_AB=y
+# CONFIG_IMQ_BEHAVIOR_BA is not set
+# CONFIG_IMQ_BEHAVIOR_BB is not set
+CONFIG_IMQ_NUM_DEVS=2
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IFB=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+CONFIG_ATM_TCP=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_CAIF_TTY=m
+CONFIG_CAIF_SPI_SLAVE=m
+# CONFIG_CAIF_SPI_SYNC is not set
+CONFIG_CAIF_HSI=m
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_DM9000=m
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_NET_VENDOR_FARADAY=y
+# CONFIG_FTMAC100 is not set
+# CONFIG_FTGMAC100 is not set
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NET_VENDOR_8390=y
+CONFIG_AX88796=m
+# CONFIG_AX88796_93CX6 is not set
+CONFIG_ETHOC=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC91X=m
+CONFIG_SMC911X=m
+CONFIG_SMSC911X=m
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_TI=y
+# CONFIG_TI_DAVINCI_EMAC is not set
+# CONFIG_TI_DAVINCI_MDIO is not set
+# CONFIG_TI_DAVINCI_CPDMA is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+# CONFIG_PLIP is not set
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+# CONFIG_USB_IPHETH is not set
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K=m
+# CONFIG_ATH9K_AHB is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+CONFIG_CARL9170_HWRNG=y
+CONFIG_ATH6KL=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_BCMA=y
+CONFIG_B43_SSB=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_BCMA_PIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+CONFIG_B43LEGACY_DEBUG=y
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
+CONFIG_IWM=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_MESH is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_SDIO=m
+# CONFIG_WL12XX_SDIO_TEST is not set
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+CONFIG_WAN=y
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+# CONFIG_HISAX_NO_SENDCOMPLETE is not set
+# CONFIG_HISAX_NO_LLC is not set
+# CONFIG_HISAX_NO_KEYPAD is not set
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_DEBUG=y
+
+#
+# HiSax PCMCIA card service modules
+#
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+CONFIG_GIGASET_M101=m
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCUSB=m
+CONFIG_ISDN_HDLC=m
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+CONFIG_KEYBOARD_LKKBD=m
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+CONFIG_KEYBOARD_NEWTON=m
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_OMAP=m
+CONFIG_KEYBOARD_OMAP4=m
+CONFIG_KEYBOARD_TWL4030=m
+CONFIG_KEYBOARD_XTKBD=m
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_BMA150 is not set
+# CONFIG_INPUT_MMA8450 is not set
+# CONFIG_INPUT_MPU3050 is not set
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+# CONFIG_INPUT_KXTJ9 is not set
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_TWL4030_PWRBUTTON=m
+CONFIG_INPUT_TWL4030_VIBRA=m
+CONFIG_INPUT_TWL6040_VIBRA=m
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_PWM_BEEPER=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_CMA3000 is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_8250_DW=m
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=m
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_XILINX_PS_UART=m
+# CONFIG_TTY_PRINTK is not set
+CONFIG_PRINTER=m
+# CONFIG_LP_CONSOLE is not set
+CONFIG_PPDEV=m
+# CONFIG_HVC_DCC is not set
+CONFIG_IPMI_HANDLER=m
+CONFIG_IPMI_PANIC_EVENT=y
+# CONFIG_IPMI_PANIC_STRING is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_OMAP=y
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+# CONFIG_I2C_TAOS_EVM is not set
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_STUB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+CONFIG_PPS_CLIENT_KTIMER=m
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+CONFIG_DP83640_PHY=m
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCF857X=m
+# CONFIG_GPIO_SX150X is not set
+CONFIG_GPIO_TWL4030=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+CONFIG_HDQ_MASTER_OMAP=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2780 is not set
+CONFIG_BATTERY_DS2782=m
+# CONFIG_BATTERY_BQ20Z75 is not set
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+# CONFIG_BATTERY_MAX17042 is not set
+CONFIG_CHARGER_PCF50633=m
+# CONFIG_CHARGER_ISP1704 is not set
+# CONFIG_CHARGER_MAX8903 is not set
+CONFIG_CHARGER_TWL4030=m
+CONFIG_CHARGER_GPIO=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+# CONFIG_SENSORS_ADT7411 is not set
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+# CONFIG_SENSORS_ASC7621 is not set
+CONFIG_SENSORS_ATXP1=m
+# CONFIG_SENSORS_DS620 is not set
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_TWL4030_MADC=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_DW_WATCHDOG is not set
+CONFIG_MPCORE_WATCHDOG=m
+CONFIG_OMAP_WATCHDOG=m
+CONFIG_TWL4030_WATCHDOG=m
+CONFIG_MAX63XX_WATCHDOG=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+CONFIG_BCMA=m
+CONFIG_BCMA_BLOCKIO=y
+# CONFIG_BCMA_DEBUG is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_88PM860X is not set
+CONFIG_MFD_SM501=m
+# CONFIG_MFD_SM501_GPIO is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+CONFIG_HTC_PASIC3=m
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS6105X is not set
+CONFIG_TPS65010=m
+# CONFIG_TPS6507X is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_MFD_TPS65910 is not set
+# CONFIG_MFD_TPS65912_I2C is not set
+CONFIG_MENELAUS=y
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_MADC=m
+CONFIG_TWL4030_POWER=y
+CONFIG_MFD_TWL4030_AUDIO=y
+CONFIG_TWL6030_PWM=m
+CONFIG_TWL6040_CORE=y
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+CONFIG_MFD_WM8400=m
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_MFD_OMAP_USB_HOST=y
+# CONFIG_MFD_AAT2870_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_GPIO is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_WM8400 is not set
+# CONFIG_REGULATOR_PCF50633 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_AD5398 is not set
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_REDRAT3 is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_RC_LOOPBACK is not set
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+CONFIG_VIDEO_MSP3400=m
+# CONFIG_VIDEO_CS5345 is not set
+CONFIG_VIDEO_CS53L32A=m
+# CONFIG_VIDEO_TLV320AIC23B is not set
+CONFIG_VIDEO_WM8775=m
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_SAA717X is not set
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_AK881X is not set
+
+#
+# Camera sensor devices
+#
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+
+#
+# Miscelaneous helper chips
+#
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_VPFE_CAPTURE is not set
+# CONFIG_VIDEO_OMAP2_VOUT is not set
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_VIDEO_AU0828=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_VIDEO_SH_MOBILE_CSI2=m
+CONFIG_VIDEO_SH_MOBILE_CEU=m
+# CONFIG_VIDEO_OMAP2 is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+# CONFIG_VIDEO_EM28XX_ALSA is not set
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=y
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+# CONFIG_VIDEO_TM6000 is not set
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+# CONFIG_V4L_MEM2MEM_DRIVERS is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_RADIO_SAA7706H is not set
+# CONFIG_RADIO_TEF6862 is not set
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+CONFIG_TTPCI_EEPROM=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_CXD2820R=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_TDA10023=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_SM501 is not set
+# CONFIG_FB_SMSCUFX is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=32
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
+CONFIG_OMAP2_DSS_DPI=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+# CONFIG_OMAP2_DSS_VENC is not set
+CONFIG_OMAP4_DSS_HDMI=y
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC_DPI=y
+CONFIG_PANEL_DVI=y
+CONFIG_PANEL_SHARP_LS037V7DW01=y
+# CONFIG_PANEL_PICODLP is not set
+CONFIG_PANEL_TAAL=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+CONFIG_BACKLIGHT_PWM=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_DUMMY=m
+# CONFIG_SND_ALOOP is not set
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_ARM=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_CAIAQ=m
+# CONFIG_SND_USB_CAIAQ_INPUT is not set
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_SOC=m
+# CONFIG_SND_SOC_CACHE_LZO is not set
+CONFIG_SND_OMAP_SOC=m
+CONFIG_SND_OMAP_SOC_MCBSP=m
+CONFIG_SND_OMAP_SOC_MCPDM=m
+CONFIG_SND_OMAP_SOC_RX51=m
+CONFIG_SND_OMAP_SOC_OVERO=m
+CONFIG_SND_OMAP_SOC_OMAP3EVM=m
+CONFIG_SND_OMAP_SOC_AM3517EVM=m
+CONFIG_SND_OMAP_SOC_SDP3430=m
+CONFIG_SND_OMAP_SOC_SDP4430=m
+# CONFIG_SND_OMAP_SOC_OMAP4_HDMI is not set
+CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
+CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=m
+CONFIG_SND_OMAP_SOC_ZOOM2=m
+CONFIG_SND_OMAP_SOC_IGEP0020=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+CONFIG_SND_SOC_ALL_CODECS=m
+CONFIG_SND_SOC_WM_HUBS=m
+CONFIG_SND_SOC_AD193X=m
+CONFIG_SND_SOC_AD73311=m
+CONFIG_SND_SOC_ADAU1373=m
+CONFIG_SND_SOC_ADAV80X=m
+CONFIG_SND_SOC_ADS117X=m
+CONFIG_SND_SOC_AK4535=m
+CONFIG_SND_SOC_AK4641=m
+CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_AK4671=m
+CONFIG_SND_SOC_ALC5623=m
+CONFIG_SND_SOC_CS42L51=m
+CONFIG_SND_SOC_CS4270=m
+CONFIG_SND_SOC_CS4271=m
+CONFIG_SND_SOC_CX20442=m
+CONFIG_SND_SOC_JZ4740_CODEC=m
+CONFIG_SND_SOC_L3=m
+CONFIG_SND_SOC_DA7210=m
+CONFIG_SND_SOC_DFBMCS320=m
+CONFIG_SND_SOC_MAX98088=m
+CONFIG_SND_SOC_MAX98095=m
+CONFIG_SND_SOC_MAX9850=m
+CONFIG_SND_SOC_PCM3008=m
+CONFIG_SND_SOC_RT5631=m
+CONFIG_SND_SOC_SGTL5000=m
+CONFIG_SND_SOC_SPDIF=m
+CONFIG_SND_SOC_SSM2602=m
+CONFIG_SND_SOC_STA32X=m
+CONFIG_SND_SOC_TLV320AIC23=m
+CONFIG_SND_SOC_TLV320AIC32X4=m
+CONFIG_SND_SOC_TLV320AIC3X=m
+CONFIG_SND_SOC_TLV320DAC33=m
+CONFIG_SND_SOC_TWL4030=m
+CONFIG_SND_SOC_TWL6040=m
+CONFIG_SND_SOC_UDA134X=m
+CONFIG_SND_SOC_UDA1380=m
+CONFIG_SND_SOC_WL1273=m
+CONFIG_SND_SOC_WM1250_EV1=m
+CONFIG_SND_SOC_WM5100=m
+CONFIG_SND_SOC_WM8400=m
+CONFIG_SND_SOC_WM8510=m
+CONFIG_SND_SOC_WM8523=m
+CONFIG_SND_SOC_WM8580=m
+CONFIG_SND_SOC_WM8711=m
+CONFIG_SND_SOC_WM8727=m
+CONFIG_SND_SOC_WM8728=m
+CONFIG_SND_SOC_WM8731=m
+CONFIG_SND_SOC_WM8737=m
+CONFIG_SND_SOC_WM8741=m
+CONFIG_SND_SOC_WM8750=m
+CONFIG_SND_SOC_WM8753=m
+CONFIG_SND_SOC_WM8776=m
+CONFIG_SND_SOC_WM8782=m
+CONFIG_SND_SOC_WM8804=m
+CONFIG_SND_SOC_WM8900=m
+CONFIG_SND_SOC_WM8903=m
+CONFIG_SND_SOC_WM8904=m
+CONFIG_SND_SOC_WM8940=m
+CONFIG_SND_SOC_WM8955=m
+CONFIG_SND_SOC_WM8960=m
+CONFIG_SND_SOC_WM8961=m
+CONFIG_SND_SOC_WM8962=m
+CONFIG_SND_SOC_WM8971=m
+CONFIG_SND_SOC_WM8974=m
+CONFIG_SND_SOC_WM8978=m
+CONFIG_SND_SOC_WM8983=m
+CONFIG_SND_SOC_WM8985=m
+CONFIG_SND_SOC_WM8988=m
+CONFIG_SND_SOC_WM8990=m
+CONFIG_SND_SOC_WM8991=m
+CONFIG_SND_SOC_WM8993=m
+CONFIG_SND_SOC_WM8995=m
+CONFIG_SND_SOC_WM8996=m
+CONFIG_SND_SOC_WM9081=m
+CONFIG_SND_SOC_LM4857=m
+CONFIG_SND_SOC_MAX9877=m
+CONFIG_SND_SOC_TPA6130A2=m
+CONFIG_SND_SOC_WM2000=m
+CONFIG_SND_SOC_WM9090=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+# CONFIG_HID_ACRUX is not set
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+# CONFIG_HID_PRODIKEYS is not set
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+# CONFIG_HID_EMS_FF is not set
+CONFIG_HID_EZKEY=m
+# CONFIG_HID_HOLTEK is not set
+# CONFIG_HID_KEYTOUCH is not set
+CONFIG_HID_KYE=m
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+# CONFIG_HID_LCPOWER is not set
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+# CONFIG_LOGIG940_FF is not set
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+# CONFIG_HID_MULTITOUCH is not set
+CONFIG_HID_NTRIG=m
+# CONFIG_HID_ORTEK is not set
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+# CONFIG_HID_PICOLCD is not set
+CONFIG_HID_PRIMAX=m
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+# CONFIG_HID_ZYDACRON is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB_ARCH_HAS_XHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_DWC3 is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_EHCI_HCD_OMAP=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_OMAP1=y
+CONFIG_USB_OHCI_HCD_OMAP3=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_U132_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+# CONFIG_USB_STORAGE_DATAFAB is not set
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+CONFIG_USB_SERIAL_EDGEPORT=m
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+# CONFIG_USB_SERIAL_OMNINET is not set
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_ADUTUX is not set
+CONFIG_USB_SEVSEG=m
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+# CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_FTDI_ELAN=m
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+CONFIG_USB_IOWARRIOR=m
+# CONFIG_USB_TEST is not set
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=m
+CONFIG_TWL6030_USB=m
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+CONFIG_MMC_TEST=m
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PLTFM=m
+# CONFIG_MMC_SDHCI_PXAV3 is not set
+# CONFIG_MMC_SDHCI_PXAV2 is not set
+CONFIG_MMC_OMAP=y
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_DW is not set
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_LM3530 is not set
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+CONFIG_LEDS_PCA955X=m
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_REGULATOR is not set
+CONFIG_LEDS_BD2802=m
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_RENESAS_TPU is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_BQ32K=y
+CONFIG_RTC_DRV_TWL92330=y
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+# CONFIG_RTC_DRV_EM3027 is not set
+# CONFIG_RTC_DRV_RV3029C2 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+CONFIG_RTC_DRV_BQ4802=y
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_PCF50633 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=m
+CONFIG_TIMB_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+CONFIG_ASYNC_TX_DMA=y
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+
+#
+# Virtio drivers
+#
+# CONFIG_VIRTIO_BALLOON is not set
+# CONFIG_VIRTIO_MMIO is not set
+CONFIG_STAGING=y
+# CONFIG_USBIP_CORE is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_PANEL is not set
+CONFIG_R8712U=m
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_IIO is not set
+# CONFIG_XVMALLOC is not set
+# CONFIG_ZRAM is not set
+# CONFIG_FB_SM7XX is not set
+# CONFIG_TIDSPBRIDGE is not set
+CONFIG_USB_ENESTORAGE=m
+# CONFIG_BCM_WIMAX is not set
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+# CONFIG_SPEAKUP is not set
+# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
+# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
+# CONFIG_STAGING_MEDIA is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_HWSPINLOCK=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_HWSPINLOCK_OMAP=m
+CONFIG_CLKSRC_MMIO=y
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_VIRT_DRIVERS is not set
+# CONFIG_PM_DEVFREQ is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=m
+CONFIG_JBD2=m
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+CONFIG_JFS_STATISTICS=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=m
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=m
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+CONFIG_ECRYPT_FS=m
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_FSCACHE is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_CEPH_FS is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+# CONFIG_CIFS_FSCACHE is not set
+CONFIG_CIFS_ACL=y
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp850"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_ENCRYPTED_KEYS is not set
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=m
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_BLOWFISH_COMMON=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_OMAP_SHAM=m
+CONFIG_CRYPTO_DEV_OMAP_AES=m
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=m
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+CONFIG_CRC8=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CPU_RMAP=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
--- /dev/null
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/arm 3.2.21 Kernel Configuration
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_HAVE_SCHED_CLOCK=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_NEED_MACH_MEMORY_H=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_SPARSE_IRQ=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=19
+# CONFIG_CGROUPS is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EXPERT=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_HIGHBANK is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_PRIMA2 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PICOXCELL is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+CONFIG_ARCH_BCM2708=y
+# CONFIG_ARCH_VT8500 is not set
+# CONFIG_ARCH_ZYNQ is not set
+# CONFIG_GPIO_PCA953X is not set
+
+#
+# System MMU
+#
+
+#
+# Broadcom BCM2708 Implementations
+#
+CONFIG_MACH_BCM2708=y
+CONFIG_BCM2708_GPIO=y
+CONFIG_BCM2708_VCMEM=y
+# CONFIG_BCM2708_NOL2CACHE is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_CPU_HAS_PMU=y
+# CONFIG_ARM_ERRATA_326103 is not set
+CONFIG_ARM_ERRATA_411920=y
+# CONFIG_ARM_ERRATA_364296 is not set
+CONFIG_PL330=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HAVE_ARCH_PFN_VALID=y
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_CLEANCACHE is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_USE_OF=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+# CONFIG_ARM_APPENDED_DTB is not set
+CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=tty1 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p3 rootwait ro"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+# CONFIG_CMDLINE_EXTEND is not set
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_CLK=y
+CONFIG_CPU_PM=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_DEFAULT_RENO=y
+CONFIG_DEFAULT_TCP_CONG="reno"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+# CONFIG_IPV6_SUBTREES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_ZONES is not set
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_IMQ=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_LAYER7=m
+# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+# CONFIG_IP_VS_PROTO_TCP is not set
+# CONFIG_IP_VS_PROTO_UDP is not set
+# CONFIG_IP_VS_PROTO_AH_ESP is not set
+# CONFIG_IP_VS_PROTO_ESP is not set
+# CONFIG_IP_VS_PROTO_AH is not set
+# CONFIG_IP_VS_PROTO_SCTP is not set
+
+#
+# IPVS scheduler
+#
+# CONFIG_IP_VS_RR is not set
+# CONFIG_IP_VS_WRR is not set
+# CONFIG_IP_VS_LC is not set
+# CONFIG_IP_VS_WLC is not set
+# CONFIG_IP_VS_LBLC is not set
+# CONFIG_IP_VS_LBLCR is not set
+# CONFIG_IP_VS_DH is not set
+# CONFIG_IP_VS_SH is not set
+# CONFIG_IP_VS_SED is not set
+# CONFIG_IP_VS_NQ is not set
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_NFCT=y
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_IP_NF_MATCH_IPP2P=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_LANE is not set
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_TAG_DSA=y
+CONFIG_NET_DSA_TAG_EDSA=y
+CONFIG_NET_DSA_TAG_TRAILER=y
+CONFIG_NET_DSA_MV88E6XXX=y
+CONFIG_NET_DSA_MV88E6060=y
+CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
+CONFIG_NET_DSA_MV88E6131=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+# CONFIG_BATMAN_ADV_DEBUG is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+# CONFIG_BT_L2CAP is not set
+# CONFIG_BT_SCO is not set
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEFAULT_PS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_GPIO=m
+# CONFIG_NET_9P is not set
+CONFIG_CAIF=m
+# CONFIG_CAIF_DEBUG is not set
+CONFIG_CAIF_NETDEV=m
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+# CONFIG_NFC is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+CONFIG_MTD_OF_PARTS=m
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+CONFIG_SM_FTL=m
+# CONFIG_MTD_OOPS is not set
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_DOCG3 is not set
+CONFIG_MTD_NAND_ECC=m
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_DTC=y
+CONFIG_OF=y
+
+#
+# Device Tree and Open Firmware support
+#
+CONFIG_PROC_DEVICETREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=m
+CONFIG_OF_NET=y
+CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_DRBD is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=8
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MG_DISK=m
+CONFIG_MG_DISK_RES=0
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ATMEL_PWM is not set
+# CONFIG_ICS932S401 is not set
+CONFIG_ENCLOSURE_SERVICES=m
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_BMP085 is not set
+# CONFIG_USB_SWITCH_FSA9480 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+CONFIG_EEPROM_93CX6=m
+# CONFIG_EEPROM_93XX46 is not set
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+
+#
+# Altera FPGA firmware download module
+#
+# CONFIG_ALTERA_STAPL is not set
+CONFIG_BCM2708_VCHIQ=y
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_LIBFC=m
+CONFIG_LIBFCOE=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI_PLATFORM=m
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_SATA_MV=m
+
+#
+# PATA SFF controllers with BMDMA
+#
+# CONFIG_PATA_ARASAN_CF is not set
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_PLATFORM=m
+CONFIG_PATA_OF_PLATFORM=m
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_DELAY=m
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+# CONFIG_TARGET_CORE is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_IMQ=m
+# CONFIG_IMQ_BEHAVIOR_AA is not set
+CONFIG_IMQ_BEHAVIOR_AB=y
+# CONFIG_IMQ_BEHAVIOR_BA is not set
+# CONFIG_IMQ_BEHAVIOR_BB is not set
+CONFIG_IMQ_NUM_DEVS=2
+CONFIG_MII=m
+# CONFIG_IEEE802154_DRIVERS is not set
+CONFIG_IFB=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+CONFIG_ATM_TCP=m
+
+#
+# CAIF transport drivers
+#
+# CONFIG_CAIF_TTY is not set
+# CONFIG_CAIF_SPI_SLAVE is not set
+# CONFIG_CAIF_HSI is not set
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_DM9000=m
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_FARADAY=y
+# CONFIG_FTMAC100 is not set
+# CONFIG_FTGMAC100 is not set
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_NET_VENDOR_MICREL=y
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+CONFIG_KS8851_MLL=m
+CONFIG_NET_VENDOR_MICROCHIP=y
+# CONFIG_ENC28J60 is not set
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NET_VENDOR_8390=y
+CONFIG_AX88796=m
+# CONFIG_AX88796_93CX6 is not set
+CONFIG_ETHOC=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC91X=m
+CONFIG_SMC911X=m
+CONFIG_SMSC911X=m
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=m
+# CONFIG_MDIO_GPIO is not set
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K=m
+# CONFIG_ATH9K_AHB is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+CONFIG_CARL9170_HWRNG=y
+CONFIG_ATH6KL=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_BCMA=y
+CONFIG_B43_SSB=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_BCMA_PIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+CONFIG_B43LEGACY_DEBUG=y
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
+CONFIG_IWM=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_MESH is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+# CONFIG_P54_SPI is not set
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+# CONFIG_WL1251_SPI is not set
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+# CONFIG_WL12XX_SPI is not set
+CONFIG_WL12XX_SDIO=m
+CONFIG_WL12XX_SDIO_TEST=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+CONFIG_WAN=y
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_ISDN=y
+# CONFIG_ISDN_I4L is not set
+# CONFIG_ISDN_CAPI is not set
+CONFIG_ISDN_DRV_GIGASET=m
+CONFIG_GIGASET_DUMMYLL=y
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+CONFIG_GIGASET_M101=m
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCUSB=m
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_BMA150 is not set
+# CONFIG_INPUT_MMA8450 is not set
+# CONFIG_INPUT_MPU3050 is not set
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+# CONFIG_INPUT_KXTJ9 is not set
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_CMA3000 is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_N_GSM=y
+# CONFIG_TRACE_SINK is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_SERIAL_XILINX_PS_UART is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_NVRAM=m
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_BCM2708=m
+# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_BCM2708=m
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_GPIO=m
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PL022 is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+
+#
+# Enable Device Drivers -> PPS to see the PTP clock options.
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO drivers:
+#
+# CONFIG_GPIO_GENERIC_PLATFORM is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_PL061 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+# CONFIG_W1_MASTER_DS1WM is not set
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+# CONFIG_W1_SLAVE_DS2433_CRC is not set
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_BQ27000=m
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_AD7314=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADCXX=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM70=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX1111=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_ADS7871=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_CORE is not set
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ARM_SP805_WATCHDOG is not set
+# CONFIG_DW_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+CONFIG_BCM2708_WDT=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+CONFIG_BCMA=m
+CONFIG_BCMA_BLOCKIO=y
+# CONFIG_BCMA_DEBUG is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_MFD_TPS65912_SPI is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_REGULATOR is not set
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+CONFIG_VIDEO_MSP3400=m
+# CONFIG_VIDEO_CS5345 is not set
+CONFIG_VIDEO_CS53L32A=m
+# CONFIG_VIDEO_TLV320AIC23B is not set
+CONFIG_VIDEO_WM8775=m
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+CONFIG_VIDEO_SAA711X=m
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_SAA717X is not set
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_AK881X is not set
+
+#
+# Camera sensor devices
+#
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+
+#
+# Miscelaneous helper chips
+#
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_VIVI is not set
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_VIDEO_AU0828=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_VIDEO_SH_MOBILE_CSI2=m
+CONFIG_VIDEO_SH_MOBILE_CEU=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=y
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+# CONFIG_V4L_MEM2MEM_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+CONFIG_TTPCI_EEPROM=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_CXD2820R=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_BCM2708=y
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_SMSCUFX is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_L4F00242T03 is not set
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_LCD_S6E63M0 is not set
+# CONFIG_LCD_LD9040 is not set
+# CONFIG_LCD_AMS369FG06 is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_GENERIC=m
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_ADP8870 is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_ARM=y
+# CONFIG_SND_ARMAACI is not set
+CONFIG_SND_BCM2835=m
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_CAIAQ=m
+# CONFIG_SND_USB_CAIAQ_INPUT is not set
+CONFIG_SND_USB_6FIRE=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+# CONFIG_HID_ACRUX_FF is not set
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+# CONFIG_HID_PRODIKEYS is not set
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+# CONFIG_HOLTEK_FF is not set
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIWHEELS_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+# CONFIG_HID_PICOLCD_FB is not set
+# CONFIG_HID_PICOLCD_BACKLIGHT is not set
+# CONFIG_HID_PICOLCD_LCD is not set
+# CONFIG_HID_PICOLCD_LEDS is not set
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_QUANTA=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_ROCCAT_COMMON=m
+# CONFIG_HID_ROCCAT_ARVO is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_ROCCAT_KONEPLUS is not set
+# CONFIG_HID_ROCCAT_KOVAPLUS is not set
+# CONFIG_HID_ROCCAT_PYRA is not set
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=m
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=m
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_HID_ZYDACRON=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_ARCH_HAS_XHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_DWC3 is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_U132_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_DWCOTG=y
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=y
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_ARMMMCI is not set
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+CONFIG_MMC_SDHCI_PLTFM=y
+# CONFIG_MMC_SDHCI_PXAV3 is not set
+# CONFIG_MMC_SDHCI_PXAV2 is not set
+CONFIG_MMC_SDHCI_BCM2708=y
+CONFIG_MMC_SDHCI_BCM2708_DMA=y
+# CONFIG_MMC_BCM2708 is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_VUB300 is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_RENESAS_TPU is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+CONFIG_RTC_DRV_M41T93=m
+CONFIG_RTC_DRV_M41T94=m
+CONFIG_RTC_DRV_DS1305=m
+CONFIG_RTC_DRV_DS1390=m
+CONFIG_RTC_DRV_MAX6902=m
+CONFIG_RTC_DRV_R9701=m
+CONFIG_RTC_DRV_RS5C348=m
+CONFIG_RTC_DRV_DS3234=m
+CONFIG_RTC_DRV_PCF2123=m
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=m
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_PL030=m
+CONFIG_RTC_DRV_PL031=m
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_AMBA_PL08X=y
+CONFIG_DW_DMAC=m
+CONFIG_TIMB_DMA=m
+CONFIG_PL330_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+CONFIG_ASYNC_TX_DMA=y
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+
+#
+# Virtio drivers
+#
+# CONFIG_VIRTIO_BALLOON is not set
+# CONFIG_VIRTIO_MMIO is not set
+# CONFIG_STAGING is not set
+CONFIG_CLKDEV_LOOKUP=y
+
+#
+# Hardware Spinlock drivers
+#
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_VIRT_DRIVERS is not set
+# CONFIG_PM_DEVFREQ is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+CONFIG_JBD2=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+CONFIG_JFS_STATISTICS=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=m
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=m
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+CONFIG_ECRYPT_FS=m
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_FSCACHE is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_CEPH_FS is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+# CONFIG_CIFS_FSCACHE is not set
+CONFIG_CIFS_ACL=y
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp850"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_ENCRYPTED_KEYS is not set
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=m
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_BLOWFISH_COMMON=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=m
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+CONFIG_CRC8=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
+CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
-CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
-CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_CS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
+CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.41-ipfire
-# Tue May 31 14:26:02 2011
+# Linux kernel version: 2.6.32.45-ipfire
+# Thu Dec 29 15:32:08 2011
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
+CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_ISP1362_HCD=m
-CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_CS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
# CONFIG_EXOFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
+CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
+CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_ISP1362_HCD=m
-CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_CS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
# CONFIG_EXOFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
+CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
+CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_ISP1362_HCD=m
-CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_CS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
# CONFIG_EXOFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
+CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
--- /dev/null
+boot/uInit-ipfire-omap
+boot/uImage-ipfire-omap
+boot/System.map-3.2.22-ipfire-omap
+boot/config-3.2.22-ipfire-omap
+lib/modules/3.2.22-ipfire-omap
--- /dev/null
+boot/kernel.img
+boot/System.map-3.2.22-ipfire-rpi
+boot/config-3.2.22-ipfire-rpi
+lib/modules/3.2.22-ipfire-rpi
--- /dev/null
+#boot/LICENCE.broadcom
+boot/arm128_start.elf
+boot/arm192_start.elf
+boot/arm224_start.elf
+boot/bootcode.bin
+boot/cmdline.txt
+#boot/first32k.bin
+boot/loader.bin
+boot/start.elf
--- /dev/null
+#boot/MLO
+#boot/u-boot.bin
+usr/bin/mkimage
+boot/boot.scr
+boot/boot.script
+boot/convert_bootscript
+++ /dev/null
-usr/bin/mkimage
#lib/modules/KVER-ipfire/kernel/fs/smbfs/smbfs.ko
#lib/modules/KVER-ipfire/kernel/fs/udf
#lib/modules/KVER-ipfire/kernel/fs/udf/udf.ko
+#lib/modules/KVER-ipfire/kernel/fs/ufs
+#lib/modules/KVER-ipfire/kernel/fs/ufs/xfs.ko
#lib/modules/KVER-ipfire/kernel/fs/xfs
#lib/modules/KVER-ipfire/kernel/fs/xfs/xfs.ko
#lib/modules/KVER-ipfire/kernel/lib
#usr/include/alsa/timer.h
#usr/include/alsa/use-case.h
#usr/include/alsa/version.h
+#usr/include/sound
+#usr/include/sound/ac97_codec.h
+#usr/include/sound/aci.h
+#usr/include/sound/ad1816a.h
+#usr/include/sound/ad1843.h
+#usr/include/sound/adau1373.h
+#usr/include/sound/ak4113.h
+#usr/include/sound/ak4114.h
+#usr/include/sound/ak4117.h
+#usr/include/sound/ak4531_codec.h
+#usr/include/sound/ak4641.h
+#usr/include/sound/ak4xxx-adda.h
+#usr/include/sound/alc5623.h
+#usr/include/sound/asequencer.h
+#usr/include/sound/asoundef.h
+#usr/include/sound/asound_fm.h
+#usr/include/sound/asound.h
+#usr/include/sound/atmel-abdac.h
+#usr/include/sound/atmel-ac97c.h
+#usr/include/sound/compress_driver.h
+#usr/include/sound/compress_offload.h
+#usr/include/sound/compress_params.h
+#usr/include/sound/control.h
+#usr/include/sound/core.h
+#usr/include/sound/cs4231-regs.h
+#usr/include/sound/cs4271.h
+#usr/include/sound/cs46xx_dsp_scb_types.h
+#usr/include/sound/cs46xx_dsp_spos.h
+#usr/include/sound/cs46xx_dsp_task_types.h
+#usr/include/sound/cs46xx.h
+#usr/include/sound/cs8403.h
+#usr/include/sound/cs8427.h
+#usr/include/sound/emu10k1.h
+#usr/include/sound/emu10k1_synth.h
+#usr/include/sound/emu8000.h
+#usr/include/sound/emu8000_reg.h
+#usr/include/sound/emux_legacy.h
+#usr/include/sound/emux_synth.h
+#usr/include/sound/es1688.h
+#usr/include/sound/gus.h
+#usr/include/sound/hda_hwdep.h
+#usr/include/sound/hdsp.h
+#usr/include/sound/hdspm.h
+#usr/include/sound/hwdep.h
+#usr/include/sound/i2c.h
+#usr/include/sound/info.h
+#usr/include/sound/initval.h
+#usr/include/sound/jack.h
+#usr/include/sound/l3.h
+#usr/include/sound/max98088.h
+#usr/include/sound/max98095.h
+#usr/include/sound/memalloc.h
+#usr/include/sound/minors.h
+#usr/include/sound/mixer_oss.h
+#usr/include/sound/mpu401.h
+#usr/include/sound/opl3.h
+#usr/include/sound/opl4.h
+#usr/include/sound/pcm.h
+#usr/include/sound/pcm-indirect.h
+#usr/include/sound/pcm_oss.h
+#usr/include/sound/pcm_params.h
+#usr/include/sound/pt2258.h
+#usr/include/sound/pxa2xx-lib.h
+#usr/include/sound/rawmidi.h
+#usr/include/sound/s3c24xx_uda134x.h
+#usr/include/sound/saif.h
+#usr/include/sound/sb16_csp.h
+#usr/include/sound/sb.h
+#usr/include/sound/seq_device.h
+#usr/include/sound/seq_kernel.h
+#usr/include/sound/seq_midi_emul.h
+#usr/include/sound/seq_midi_event.h
+#usr/include/sound/seq_oss.h
+#usr/include/sound/seq_oss_legacy.h
+#usr/include/sound/seq_virmidi.h
+#usr/include/sound/sfnt_info.h
+#usr/include/sound/sh_dac_audio.h
+#usr/include/sound/sh_fsi.h
+#usr/include/sound/snd_wavefront.h
+#usr/include/sound/soc-dai.h
+#usr/include/sound/soc-dapm.h
+#usr/include/sound/soc.h
+#usr/include/sound/soundfont.h
+#usr/include/sound/sta32x.h
+#usr/include/sound/tea575x-tuner.h
+#usr/include/sound/tea6330t.h
+#usr/include/sound/timer.h
+#usr/include/sound/tlv320aic32x4.h
+#usr/include/sound/tlv320aic3x.h
+#usr/include/sound/tlv320dac33-plat.h
+#usr/include/sound/tlv.h
+#usr/include/sound/tpa6130a2-plat.h
+#usr/include/sound/trident.h
+#usr/include/sound/uda134x.h
+#usr/include/sound/uda1380.h
+#usr/include/sound/util_mem.h
+#usr/include/sound/version.h
+#usr/include/sound/vx_core.h
+#usr/include/sound/wavefront.h
+#usr/include/sound/wm1250-ev1.h
+#usr/include/sound/wm2000.h
+#usr/include/sound/wm5100.h
+#usr/include/sound/wm8903.h
+#usr/include/sound/wm8904.h
+#usr/include/sound/wm8955.h
+#usr/include/sound/wm8960.h
+#usr/include/sound/wm8962.h
+#usr/include/sound/wm8993.h
+#usr/include/sound/wm8996.h
+#usr/include/sound/wm9081.h
+#usr/include/sound/wm9090.h
+#usr/include/sound/wss.h
+#usr/include/sound/ymfpci.h
#usr/include/sys/asoundlib.h
#usr/lib/alsa-lib
#usr/lib/alsa-lib/smixer
#usr/share/aclocal/alsa.m4
usr/share/alsa
#usr/share/alsa/alsa.conf
+#usr/share/alsa/alsa.conf.d
+usr/share/alsa/alsa.conf.d/README
#usr/share/alsa/cards
#usr/share/alsa/cards/AACI.conf
#usr/share/alsa/cards/aliases.alisp
#usr/share/alsa/cards/ENS1370.conf
#usr/share/alsa/cards/ENS1371.conf
#usr/share/alsa/cards/ES1968.conf
+#usr/share/alsa/cards/FireWave.conf
#usr/share/alsa/cards/FM801.conf
+#usr/share/alsa/cards/FWSpeakers.conf
#usr/share/alsa/cards/GUS.conf
#usr/share/alsa/cards/HDA-Intel.conf
#usr/share/alsa/cards/ICE1712.conf
#lib/modules/KVER-ipfire-pae/kernel/fs/smbfs/smbfs.ko
#lib/modules/KVER-ipfire-pae/kernel/fs/udf
#lib/modules/KVER-ipfire-pae/kernel/fs/udf/udf.ko
+#lib/modules/KVER-ipfire-pae/kernel/fs/ufs
+#lib/modules/KVER-ipfire-pae/kernel/fs/ufs/xfs.ko
#lib/modules/KVER-ipfire-pae/kernel/fs/xfs
#lib/modules/KVER-ipfire-pae/kernel/fs/xfs/xfs.ko
#lib/modules/KVER-ipfire-pae/kernel/lib
#lib/modules/KVER-ipfire-xen/kernel/fs/smbfs/smbfs.ko
#lib/modules/KVER-ipfire-xen/kernel/fs/udf
#lib/modules/KVER-ipfire-xen/kernel/fs/udf/udf.ko
+#lib/modules/KVER-ipfire-xen/kernel/fs/ufs
+#lib/modules/KVER-ipfire-xen/kernel/fs/ufs/xfs.ko
#lib/modules/KVER-ipfire-xen/kernel/fs/xfs
#lib/modules/KVER-ipfire-xen/kernel/fs/xfs/xfs.ko
#lib/modules/KVER-ipfire-xen/kernel/lib
--- /dev/null
+fatload mmc 0:1 0x80000000 uImage-ipfire-omap
+fatload mmc 0:1 0x81600000 uInit-ipfire-omap
+setenv bootargs vram=32M console=tty1 omapfb.mode=dvi:800x600MR-16@60 rootwait smsc95xx.macaddr=$usbethaddr root=/dev/mmcblk0p3 ro
+bootm 0x80000000 0x81600000
--- /dev/null
+mkimage -A arm -T script -C none -d boot.script boot.scr
include Config
-VER = 1.0.24.1
-UVER = 1.0.24.2
-FVER = 1.0.24.1
-DVER = 1.0.24
+VER = 1.0.25
+UVER = 1.0.25
+FVER = 1.0.25
+DVER = 1.0.25
VERSUFIX = ipfire$(KCFG)
DL_FROM = $(URL_IPFIRE)
DIR_APP = $(DIR_SRC)/$(THISAPP)
PROG = alsa
-PAK_VER = 9
+PAK_VER = 10
DEPS = ""
alsa-firmware-$(FVER).tar.bz2 = $(DL_FROM)/alsa-firmware-$(FVER).tar.bz2
alsa-driver-$(DVER).tar.bz2 = $(DL_FROM)/alsa-driver-$(DVER).tar.bz2
-$(DL_FILE)_MD5 = 7cc05f25e1d5b65da8fb3fdcd540f226
-alsa-utils-$(UVER).tar.bz2_MD5 = 8238cd57cb301d1c36bcf0ecb59ce6b2
-alsa-firmware-$(FVER).tar.bz2_MD5 = d37434dfcfececd8581d2f0bbe2fcf1b
-alsa-driver-$(DVER).tar.bz2_MD5 = a4ffd80745ce5098dfd48d83c2769e0e
+$(DL_FILE)_MD5 = 06fe5819020c6684b991dcffc5471304
+alsa-utils-$(UVER).tar.bz2_MD5 = f81f9dcb9a014fd32cb3a70066a5b9a9
+alsa-firmware-$(FVER).tar.bz2_MD5 = f1939da45b162c83a726c54a470ef139
+alsa-driver-$(DVER).tar.bz2_MD5 = ac56465c262ced60b5eb2d6492d7a923
install : $(TARGET)
cd $(DIR_SRC)/alsa-driver-$(DVER) && make install
else
cd $(DIR_SRC) && tar jxf $(DIR_DL)/$(DL_FILE)
- cd $(DIR_APP) && ./configure --enable-static
+ cd $(DIR_APP) && ./configure
cd $(DIR_APP) && make $(MAKETUNING) $(EXTRA_MAKE)
cd $(DIR_APP) && make install
cd $(DIR_SRC) && tar xfj $(DIR_DL)/alsa-utils-$(UVER).tar.bz2
###############################################################################
# #
# IPFire.org - A linux based firewall #
-# Copyright (C) 2007-2011 IPFire Team <info@ipfire.org> #
+# Copyright (C) 2007-2012 IPFire Team <info@ipfire.org> #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
VERSUFIX=ipfire$(KCFG)
-VER = 3.0-2
+VER = 3.2.5-1
THISAPP = compat-wireless-$(VER)
DL_FILE = compat-wireless-$(VER).tar.bz2
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
asix-3.5.0a.tar.bz2 = $(DL_FROM)/asix-3.5.0a.tar.bz2
-$(DL_FILE)_MD5 = 7f2d0de30bf9c3e9a941d9e67971e9b3
+$(DL_FILE)_MD5 = 19670520d7f0289a5b4c6fb28520b2ac
asix-3.5.0a.tar.bz2_MD5=cc57513505d3ad1a43b58add91d2bba7
install : $(TARGET)
# Build Updated asix usb-lan driver
cd $(DIR_APP)/drivers/net/usb && tar xvf $(DIR_DL)/asix-3.5.0a.tar.bz2
-ifeq "$(MACHINE_TYPE)" "arm"
- # B43+B44 driver doesn't build on arm
-# cd $(DIR_APP) && sed -i -e "s|CONFIG_B43=m||g" config.mk
-# cd $(DIR_APP) && sed -i -e "s|CONFIG_B44=m||g" config.mk
# Add libartas uAP driver
cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/compat-wireless-3.0-libertas_uap.patch
cd $(DIR_APP)&& echo CONFIG_LIBERTAS_UAP=m >> config.mk
+
+ifeq "$(MACHINE_TYPE)" "arm"
+ # fix atomic64 functions
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/compat-wireless-3.2.5-1-fix_atomic64_t_on_arm.patch
endif
cd $(DIR_APP) && make KLIB=/lib/modules/$(KVER)-$(VERSUFIX) \
###############################################################################
# #
# IPFire.org - A linux based firewall #
-# Copyright (C) 2010 IPFire Team <info@ipfire.org> #
+# Copyright (C) 2011 IPFire Team <info@ipfire.org> #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
VER = 006
+# Version of the omap kernel
+KVER3 = `grep "^VER " $(DIR_SRC)/lfs/linux3 | sed "s| ||g" | cut -d"=" -f2`
+
THISAPP = dracut-$(VER)
DL_FILE = $(THISAPP).tar.bz2
DL_FROM = $(URL_IPFIRE)
# kirkwood kernel
/sbin/dracut --force --verbose --strip /boot/ipfirerd-$(KVER)-kirkwood.img $(KVER)-ipfire-kirkwood
cd /boot && mkimage -A arm -T ramdisk -C lzma -d ipfirerd-$(KVER)-kirkwood.img uInit-ipfire-kirkwood
+
+ # omap kernel
+ /sbin/dracut --force --verbose --strip /boot/ipfirerd-$(KVER3)-omap.img $(KVER3)-ipfire-omap
+ cd /boot && mkimage -A arm -T ramdisk -C lzma -d ipfirerd-$(KVER3)-omap.img uInit-ipfire-omap
else
/sbin/dracut --force --verbose --strip /boot/ipfirerd-$(KVER).img $(KVER)-ipfire
endif
###############################################################################
# Installation Details
###############################################################################
-IMGinst := /install/images/$(SNAME)-$(VERSION).2gb-ext2.$(MACHINE)-full-core$(CORE).img
-IMGinsts := /install/images/$(SNAME)-$(VERSION).2gb-ext2-scon.$(MACHINE)-full-core$(CORE).img
+IMGinst := /install/images/$(SNAME)-$(VERSION).1gb-ext4.$(MACHINE)-full-core$(CORE).img
+IMGinsts := /install/images/$(SNAME)-$(VERSION).1gb-ext4-scon.$(MACHINE)-full-core$(CORE).img
MNThdd := /install/harddisk
IMGpart := /install/images/part_area
IMGboot := /install/images/bootfs
# don't change SIZEboot this without checking Image size
-SIZEboot := 20
+SIZEboot := 64
IMGroot := /install/images/rootfs
-SIZEroot := 1400
-IMGvar := /install/images/varfs
-SIZEvar := 430
+SIZEroot := 600
$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
- rm -rf $(MNThdd) $(IMGinst) $(IMGpart) $(IMGboot) $(IMGroot) $(IMGvar) && mkdir -p $(MNThdd)
+ rm -rf $(MNThdd) $(IMGinst) $(IMGpart) $(IMGboot) $(IMGroot) && mkdir -p $(MNThdd)
# Create first 32 sectors of image
dd bs=1k if=/dev/zero of=$(IMGpart) count=16
# Create images for filesystems
- dd bs=1K if=/dev/zero of=$(IMGboot) count=20464 # 20MB-16K
+ dd bs=1K if=/dev/zero of=$(IMGboot) count=65520 # 64MB-16K
dd bs=1M if=/dev/zero of=$(IMGroot) count=$(SIZEroot)
- dd bs=1M if=/dev/zero of=$(IMGvar) count=$(SIZEvar)
# Format them
ifeq "$(MACHINE_TYPE)" "arm"
else
mkfs.ext2 -F $(IMGboot)
endif
- mkfs.ext2 -F $(IMGroot)
- mkfs.ext2 -F $(IMGvar)
+ mkfs.ext4 -O ^has_journal,extent -F $(IMGroot)
+
+ # Most systems that use Flashimages has no RTC at boot
+ # so the interval check should disables
+ tune2fs -i0 $(IMGroot)
# Mount Images
mount -o loop $(IMGroot) $(MNThdd)
mkdir $(MNThdd)/var
mkdir $(MNThdd)/var/log
mount -o loop $(IMGboot) $(MNThdd)/boot
- mount -o loop $(IMGvar) $(MNThdd)/var
+
+ # Install MLO and uboot first
+ifeq "$(MACHINE_TYPE)" "arm"
+ cp -v /boot/MLO $(MNThdd)/boot/
+ cp -v /boot/u-boot.bin $(MNThdd)/boot/
+ sync
+ umount $(MNThdd)/boot
+ mount -o loop $(IMGboot) $(MNThdd)/boot
+endif
# Install IPFire
tar -C $(MNThdd)/ -xvaf /install/cdrom/$(SNAME)-$(VERSION).tlz
endif
sed -i -e "s|DEVICE2|#DEVICE2|g" $(MNThdd)/etc/fstab
sed -i -e "s|DEVICE3|UUID=$$(blkid -sUUID $(IMGroot) | cut -d'"' -f2)|g" $(MNThdd)/etc/fstab
- sed -i -e "s|DEVICE4|UUID=$$(blkid -sUUID $(IMGvar) | cut -d'"' -f2)|g" $(MNThdd)/etc/fstab
- sed -i -e "s|FSTYPE|ext2|g" $(MNThdd)/etc/fstab
+ sed -i -e "s|DEVICE4|#DEVICE4|g" $(MNThdd)/etc/fstab
+ sed -i -e "s|FSTYPE|ext4|g" $(MNThdd)/etc/fstab
ifneq "$(MACHINE_TYPE)" "arm"
sed -i -e "s|MOUNT|ro|g" $(MNThdd)/boot/grub/grub.conf
# Setup symlink for partresize at first boot...
ln -sf ../init.d/partresize $(MNThdd)/etc/rc.d/rcsysinit.d/S25partresize
# Setup symlink for fsresize at second boot...
- ln -sf ../init.d/fsresize $(MNThdd)/etc/rc.d/rcsysinit.d/S26fsresize
+ ln -sf ../init.d/fsresize $(MNThdd)/etc/rc.d/rcsysinit.d/S42fsresize
# Unmount
umount $(MNThdd)/proc
umount $(MNThdd)/dev
umount $(MNThdd)/sys
umount $(MNThdd)/boot
- umount $(MNThdd)/var
umount $(MNThdd)
# zerofree the ext2 images to get better compression
fsck.ext2 -f -y $(IMGboot)
endif
zerofree $(IMGroot)
- -fsck.ext2 -f -y $(IMGroot)
- fsck.ext2 -f -y $(IMGroot)
- zerofree $(IMGvar)
- -fsck.ext2 -f -y $(IMGvar)
- fsck.ext2 -f -y $(IMGvar)
+ -fsck.ext4 -f -y $(IMGroot)
+ fsck.ext4 -f -y $(IMGroot)
# Cat to an image
- cat $(IMGpart) $(IMGboot) $(IMGroot) $(IMGvar) > $(IMGinst)
+ cat $(IMGpart) $(IMGboot) $(IMGroot) > $(IMGinst)
+
# Write Partition table
- echo -e ",$(SIZEboot),L,*\n,0,0\n,$(SIZEroot),L\n,$(SIZEvar),L\n" \
+ifneq "$(MACHINE_TYPE)" "arm"
+ echo -e ",$(SIZEboot),L,*\n,0,0\n,$(SIZEroot),L\n,0,0\n" \
+ | sfdisk -D -uM -H 64 -S 32 $(IMGinst)
+else
+ echo -e ",$(SIZEboot),c,*\n,0,0\n,$(SIZEroot),L\n,0,0\n" \
| sfdisk -D -uM -H 64 -S 32 $(IMGinst)
+endif
ifneq "$(MACHINE_TYPE)" "arm"
# Install grub
sed -i -e "s|#serial|serial|g" $(MNThdd)/boot/grub/grub.conf
sed -i -e "s|#terminal|terminal|g" $(MNThdd)/boot/grub/grub.conf
sed -i -e "s| panic=10 | console=ttyS0,115200n8 panic=10 |g" $(MNThdd)/boot/grub/grub.conf
+else
+ sed -i -e "s| console=tty1 | console=ttyAMA0,115200n8 |g" $(MNThdd)/boot/cmdline.txt
+ sed -i -e "s| console=tty1 omapfb.mode=dvi:800x600MR-16@60 | console=ttyO2,115200n8 |g" $(MNThdd)/boot/boot.script
+ cd $(MNThdd)/boot && ./convert_bootscript
endif
sed -i -e "s|1:2345:respawn:|#1:2345:respawn:|g" $(MNThdd)/etc/inittab
fsck.ext2 -f -y $(IMGboot)
endif
zerofree $(IMGroot)
- -fsck.ext2 -f -y $(IMGroot)
- fsck.ext2 -f -y $(IMGroot)
- zerofree $(IMGvar)
- -fsck.ext2 -f -y $(IMGvar)
- fsck.ext2 -f -y $(IMGvar)
+ -fsck.ext4 -f -y $(IMGroot)
+ fsck.ext4 -f -y $(IMGroot)
# Cat to an image
- cat $(IMGpart) $(IMGboot) $(IMGroot) $(IMGvar) > $(IMGinsts)
- rm -vf $(IMGpart) $(IMGboot) $(IMGroot) $(IMGvar)
+ cat $(IMGpart) $(IMGboot) $(IMGroot) > $(IMGinsts)
+ rm -vf $(IMGpart) $(IMGboot) $(IMGroot)
+
# Write Partition table
- echo -e ",$(SIZEboot),L,*\n,0,0\n,$(SIZEroot),L\n,$(SIZEvar),L\n" \
+ifneq "$(MACHINE_TYPE)" "arm"
+ echo -e ",$(SIZEboot),L,*\n,0,0\n,$(SIZEroot),L\n,0,0\n" \
| sfdisk -D -uM -H 64 -S 32 $(IMGinsts)
+else
+ echo -e ",$(SIZEboot),c,*\n,0,0\n,$(SIZEroot),L\n,0,0\n" \
+ | sfdisk -D -uM -H 64 -S 32 $(IMGinsts)
+endif
ifneq "$(MACHINE_TYPE)" "arm"
# Install grub
# Compress Image
gzip -f9 $(IMGinsts)
- rm -rf $(MNThdd) $(IMGpart) $(IMGboot) $(IMGroot) $(IMGvar)
-
+ rm -rf $(MNThdd) $(IMGpart) $(IMGboot) $(IMGroot)
###############################################################################
# #
# IPFire.org - A linux based firewall #
-# Copyright (C) 2007-2011 IPFire Team <info@ipfire.org> #
+# Copyright (C) 2007-2012 IPFire Team <info@ipfire.org> #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
include Config
-PATCHLEVEL = .45
-VER = 2.6.32.45
+PATCHLEVEL = .59
+VER = 2.6.32.59
THISAPP = linux-$(VER)
-DL_FILE = $(THISAPP).tar.gz
+DL_FILE = $(THISAPP).tar.bz2
DL_FROM = $(URL_IPFIRE)
DIR_APP = $(DIR_SRC)/$(THISAPP)
CFLAGS =
CXXFLAGS =
-PAK_VER = 19
+PAK_VER = 20
DEPS = ""
# Normal build or XEN build.
reiser4-for-2.6.32.patch.bz2 = $(URL_IPFIRE)/reiser4-for-2.6.32.patch.bz2
xen-patches-2.6.32-2f.tar.bz2 = $(URL_IPFIRE)/xen-patches-2.6.32-2f.tar.bz2
-$(DL_FILE)_MD5 = d41f1c7e704cc95fdfc3374367b6fd64
+$(DL_FILE)_MD5 = 69c68c4a8eb0f04b051a7dbcff16f6d0
netfilter-layer7-v2.22.tar.gz_MD5 = 98dff8a3d5a31885b73341633f69501f
patch-2.6.16-nath323-1.3.bz2_MD5 = f926409ff703a307baf54b57ab75d138
reiser4-for-2.6.32.patch.bz2_MD5 = 3246397973d9271eb8e6d7c97c5d2d91
cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.27_ipg-fix-driver-name.patch
cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.27_mcs7830-fix-driver-name.patch
+ # Fix mv_cesa
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32-crypto-mv_cesa.patch
+
ifeq "$(KCFG)" "-kirkwood"
# Add dreamplug,guruplug and icy 62x0 support on ARM-kirkwood
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.45-arm_kirkwood_setups.patch
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.57-arm_kirkwood_setups.patch
endif
ifeq "$(MACHINE_TYPE)" "arm"
--- /dev/null
+###############################################################################
+# #
+# IPFire.org - A linux based firewall #
+# Copyright (C) 2007-2012 IPFire Team <info@ipfire.org> #
+# #
+# This program is free software: you can redistribute it and/or modify #
+# it under the terms of the GNU General Public License as published by #
+# the Free Software Foundation, either version 3 of the License, or #
+# (at your option) any later version. #
+# #
+# This program is distributed in the hope that it will be useful, #
+# but WITHOUT ANY WARRANTY; without even the implied warranty of #
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
+# GNU General Public License for more details. #
+# #
+# You should have received a copy of the GNU General Public License #
+# along with this program. If not, see <http://www.gnu.org/licenses/>. #
+# #
+###############################################################################
+
+###############################################################################
+# Definitions
+###############################################################################
+
+include Config
+
+VER = 3.2.22
+
+RPI_PATCHES = linux-3.2-bootc-a1f8d7a
+
+THISAPP = linux-$(VER)
+DL_FILE = linux-$(VER).tar.bz2
+DL_FROM = $(URL_IPFIRE)
+DIR_APP = $(DIR_SRC)/$(THISAPP)
+CFLAGS =
+CXXFLAGS =
+
+PAK_VER = 20
+DEPS = ""
+
+VERSUFIX=ipfire$(KCFG)
+
+ifeq "$(HEADERS)" "1"
+ifeq "$(TOOLS)" "1"
+ TARGET = $(DIR_INFO)/linux-libc-headers-$(VER)-$(VERSUFIX)-tools
+ HEADERS_PREFIX = /tools
+else
+ TARGET = $(DIR_INFO)/linux-libc-headers-$(VER)-$(VERSUFIX)
+ HEADERS_PREFIX = /usr
+endif
+else
+ TARGET = $(DIR_INFO)/linux-$(VER)-$(VERSUFIX)
+endif
+
+ifeq "$(MACHINE_TYPE)" "arm"
+ HEADERS_ARCH=arm
+else
+ HEADERS_ARCH=x86
+endif
+
+ifeq "$(KCFG)" ""
+LASTKERNEL=1
+endif
+ifeq "$(KCFG)" "-kirkwood"
+LASTKERNEL=1
+endif
+
+###############################################################################
+# Top-level Rules
+###############################################################################
+objects =$(DL_FILE) \
+ rpi-patches-$(RPI_PATCHES).patch.xz
+
+
+$(DL_FILE) = $(URL_IPFIRE)/$(DL_FILE)
+rpi-patches-$(RPI_PATCHES).patch.xz = $(URL_IPFIRE)/rpi-patches-$(RPI_PATCHES).patch.xz
+
+$(DL_FILE)_MD5 = c1d28d8e27e1011687c52db17617cb8e
+rpi-patches-$(RPI_PATCHES).patch.xz_MD5 = c3891a7f38609783358e765d784e5e6e
+
+install : $(TARGET)
+
+check : $(patsubst %,$(DIR_CHK)/%,$(objects))
+
+download :$(patsubst %,$(DIR_DL)/%,$(objects))
+
+md5 : $(subst %,%_MD5,$(objects))
+
+dist:
+ @$(PAK)
+###############################################################################
+# Downloading, checking, md5sum
+###############################################################################
+
+$(patsubst %,$(DIR_CHK)/%,$(objects)) :
+ @$(CHECK)
+
+$(patsubst %,$(DIR_DL)/%,$(objects)) :
+ @$(LOAD)
+
+$(subst %,%_MD5,$(objects)) :
+ @$(MD5)
+
+###############################################################################
+# Installation Details
+###############################################################################
+
+$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
+ @$(PREBUILD)
+ @rm -rf $(DIR_APP) $(DIR_SRC)/linux && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
+
+ ln -svf linux-$(VER) $(DIR_SRC)/linux
+
+ # Linux Intermediate Queueing Device
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.2-imq.patch
+
+ # Not report deprecated syscall 1.23 (for kudzu)
+# cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.25.18-not_report_sysctl_1.23.patch
+
+ # ipp2p 0.8.2-ipfire
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.0-ipp2p-0.8.2-ipfire.patch
+
+ # Layer7-patch
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/netfilter_layer7_2.22_kernel3.0.patch
+
+ # Add some more LED triggers
+# cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.11-netdev-1.patch
+
+ # Huawei Android Phones (Vodafone V845, T-Mobile Pulse/mini ...)
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.15-option_add_huawei_android.patch
+
+ # Fix uevent PHYSDEVDRIVER
+# cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.27_ipg-fix-driver-name.patch
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.27_mcs7830-fix-driver-name.patch
+
+ifeq "$(KCFG)" "-kirkwood"
+ # Add dreamplug,guruplug and icy 62x0 support on ARM-kirkwood
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.45-arm_kirkwood_setups.patch
+endif
+
+ifeq "$(MACHINE_TYPE)" "arm"
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.45_align_ssb_modtable_32bit_boundary.patch
+
+ # Reverse some asm optimizations that are incompatible with older gcc
+ cd $(DIR_APP) && patch -p1 -R < $(DIR_SRC)/src/patches/linux-2.6-arm-asm-constraint.patch
+endif
+
+ifeq "$(KCFG)" "-omap"
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.2-0001-panda-wlan-fix.patch
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.2-0002-panda-i2c.patch
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.2-panda-reboot.patch
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.x-smsc95xx-add_mac_addr_param.patch
+endif
+
+ifeq "$(KCFG)" "-rpi"
+ # Apply Raspberry Pi kernel patches.
+ cd $(DIR_APP) && xzcat $(DIR_DL)/rpi-patches-$(RPI_PATCHES).patch.xz | patch -Np1
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.2-bcm2835-alsamixer.patch
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.2-bcm2835-limit_volume.patch
+endif
+
+ifeq "$(HEADERS)" "1"
+ # Install the header files
+ cd $(DIR_APP) && make ARCH=$(HEADERS_ARCH) INSTALL_HDR_PATH=dest headers_install
+ -mkdir -pv $(BUILDROOT)/$(HEADERS_PREFIX)/include
+ cd $(DIR_APP) && find dest/include \( -name .install -o -name ..install.cmd \) -delete
+ cd $(DIR_APP) && cp -rv dest/include/* $(BUILDROOT)/$(HEADERS_PREFIX)/include
+else
+
+ # Install ipfire logo
+ cd $(DIR_APP) && cp -vf $(DIR_SRC)/config/kernel/ipfire_logo.ppm \
+ drivers/video/logo/logo_linux_clut224.ppm
+
+ # Cleanup kernel source
+ cp $(DIR_SRC)/config/kernel/kernel.config.$(MACHINE)-$(VERSUFIX) $(DIR_APP)/.config
+ cd $(DIR_APP) && make CC="$(KGCC)" oldconfig
+ cd $(DIR_APP) && make CC="$(KGCC)" clean
+ cd $(DIR_APP) && sed -i -e 's/EXTRAVERSION\ =.*/EXTRAVERSION\ =\ -$(VERSUFIX)/' Makefile
+
+ifeq "$(KCFG)" "-kirkwood"
+ cd $(DIR_APP) && make $(MAKETUNING) CC="$(KGCC)" uImage
+ cd $(DIR_APP) && cp -v arch/arm/boot/uImage /boot/vmlinuz-$(VER)-$(VERSUFIX)
+ cd $(DIR_APP) && cp -v arch/arm/boot/uImage /boot/uImage-$(VERSUFIX)
+else
+ifeq "$(KCFG)" "-omap"
+ cd $(DIR_APP) && make $(MAKETUNING) CC="$(KGCC)" uImage
+ cd $(DIR_APP) && cp -v arch/arm/boot/uImage /boot/vmlinuz-$(VER)-$(VERSUFIX)
+ cd $(DIR_APP) && cp -v arch/arm/boot/uImage /boot/uImage-$(VERSUFIX)
+else
+ifeq "$(KCFG)" "-rpi"
+ cd $(DIR_APP) && make $(MAKETUNING) CC="$(KGCC)" zImage
+ cd /boot && cat first32k.bin $(DIR_APP)/arch/arm/boot/Image > kernel.img
+ cd $(DIR_APP) && cp -v /boot/kernel.img /boot/vmlinuz-$(VER)-$(VERSUFIX)
+else
+ifeq "$(KCFG)" "-versatile"
+ cd $(DIR_APP) && make $(MAKETUNING) CC="$(KGCC)" zImage
+ cd $(DIR_APP) && cp -v arch/arm/boot/zImage /boot/vmlinuz-$(VER)-$(VERSUFIX)
+else
+ cd $(DIR_APP) && make $(MAKETUNING) CC="$(KGCC)" bzImage
+ cd $(DIR_APP) && cp -v arch/i386/boot/bzImage /boot/vmlinuz-$(VER)-$(VERSUFIX)
+endif
+endif
+endif
+endif
+ cd $(DIR_APP) && cp -v System.map /boot/System.map-$(VER)-$(VERSUFIX)
+ cd $(DIR_APP) && cp -v .config /boot/config-$(VER)-$(VERSUFIX)
+ ln -sf vmlinuz-$(VER)-$(VERSUFIX) /boot/vmlinuz-$(VERSUFIX)
+ ln -sf System.map-$(VER)-$(VERSUFIX) /boot/System.map-$(VERSUFIX)
+ cd $(DIR_APP) && make CC="$(KGCC)" $(MAKETUNING) modules
+ cd $(DIR_APP) && make CC="$(KGCC)" $(MAKETUNING) modules_install
+ cd $(DIR_APP) && make CC="$(KGCC)" $(MAKETUNING) firmware_install
+
+ifeq "$(LASTKERNEL)" "1"
+ # Only do this once
+ cd $(DIR_APP) && install -m 755 usr/gen_init_cpio /sbin/
+
+ # Blacklist matroxfb_base
+ echo "blacklist matroxfb_base" >> /etc/modprobe.d/framebuffer
+ # Blacklist old framebuffer modules
+ for f in $$(find /lib/modules/$(VER)-$(VERSUFIX)/kernel/drivers/video -name *fb.ko); do \
+ echo "blacklist $$(basename $$f)" >> /etc/modprobe.d/framebuffer ; \
+ done
+ # Blacklist new drm framebuffer modules
+ for f in $$(ls -1 /lib/modules/$(VER)-$(VERSUFIX)/kernel/drivers/gpu/drm/*/*.ko); do \
+ echo "blacklist $$(basename $$f)" >> /etc/modprobe.d/framebuffer ; \
+ done
+ sed -i -e "s|.ko||g" /etc/modprobe.d/framebuffer
+
+ # Blacklist isdn modules
+ for f in $$(find /lib/modules/$(VER)-$(VERSUFIX)/kernel/drivers/isdn -name *.ko); do \
+ echo "blacklist $$(basename $$f)" >> /etc/modprobe.d/isdn ; \
+ done
+ sed -i -e "s|.ko||g" /etc/modprobe.d/isdn
+
+ # Disable ipv6 at runtime
+ echo "options ipv6 disable_ipv6=1" > /etc/modprobe.d/ipv6
+endif
+
+ifneq "$(MACHINE_TYPE)" "arm"
+ # Disable geode_aes modul
+ mv /lib/modules/$(VER)-$(VERSUFIX)/kernel/drivers/crypto/geode-aes.ko \
+ /lib/modules/$(VER)-$(VERSUFIX)/kernel/drivers/crypto/geode-aes.ko.off
+endif
+endif
+
+ @rm -rf $(DIR_SRC)/patch-o-matic* $(DIR_SRC)/iptables* $(DIR_SRC)/squashfs* $(DIR_SRC)/netfilter-layer7-*
+ @$(POSTBUILD)
###############################################################################
# #
# IPFire.org - A linux based firewall #
-# Copyright (C) 2007 Michael Tremer & Christian Schmidt #
+# Copyright (C) 2012 IPFire Team <info@ipfire.org> #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/pciutils-2.1.99-gcc4.patch
cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/pciutils-2.2.3-multilib.patch
cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/pciutils-2.2.3-sata.patch
-ifeq "$(LFS_PASS)" "install"
- cd $(DIR_APP)/lib && CFLAGS="-Os -fomit-frame-pointer" ./configure
- cd $(DIR_APP)/lib && CFLAGS="-Os -fomit-frame-pointer" make $(MAKETUNING)
- -mkdir -p /opt/$(MACHINE)-uClibc/include/pci
- cd $(DIR_APP) && install -m 0644 lib/libpci.a /opt/$(MACHINE)-uClibc/lib
- cd $(DIR_APP) && install -m 0644 lib/*.h /opt/$(MACHINE)-uClibc/include/pci
-else
ifeq "$(MACHINE_TYPE)" "arm"
- cd $(DIR_APP)/lib && ./configure
+ cd $(DIR_APP)/lib && ./configure /usr/share/hwdata $(VER)
cd $(DIR_APP)/lib && sed -e "s/^#error.*$$/#define CPU_ARCH_ARM/" -i config.h
endif
cd $(DIR_APP) && make PREFIX=/usr $(MAKETUNING)
cd $(DIR_APP) && install -v -m 755 -d /usr/include/pci
cd $(DIR_APP) && install -v -m 644 lib/libpci.a /usr/lib
cd $(DIR_APP) && install -v -m 644 lib/*.h /usr/include/pci
-endif
@rm -rf $(DIR_APP)
@$(POSTBUILD)
--- /dev/null
+###############################################################################
+# #
+# IPFire.org - A linux based firewall #
+# Copyright (C) 2012 IPFire Team <info@ipfire.org> #
+# #
+# This program is free software: you can redistribute it and/or modify #
+# it under the terms of the GNU General Public License as published by #
+# the Free Software Foundation, either version 3 of the License, or #
+# (at your option) any later version. #
+# #
+# This program is distributed in the hope that it will be useful, #
+# but WITHOUT ANY WARRANTY; without even the implied warranty of #
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
+# GNU General Public License for more details. #
+# #
+# You should have received a copy of the GNU General Public License #
+# along with this program. If not, see <http://www.gnu.org/licenses/>. #
+# #
+###############################################################################
+
+###############################################################################
+# Definitions
+###############################################################################
+
+include Config
+
+VER = 234c19d
+
+THISAPP = rpi-firmware-$(VER)
+DL_FILE = $(THISAPP).tar.xz
+DL_FROM = $(URL_IPFIRE)
+TARGET = $(DIR_INFO)/$(THISAPP)
+
+SUP_ARCH = armv5tel
+
+###############################################################################
+# Top-level Rules
+###############################################################################
+
+objects = $(DL_FILE)
+
+$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
+
+$(DL_FILE)_MD5 = 46d92089ff8d4da355954f7c2296e311
+
+install : $(TARGET)
+
+check : $(patsubst %,$(DIR_CHK)/%,$(objects))
+
+download :$(patsubst %,$(DIR_DL)/%,$(objects))
+
+md5 : $(subst %,%_MD5,$(objects))
+
+###############################################################################
+# Downloading, checking, md5sum
+###############################################################################
+
+$(patsubst %,$(DIR_CHK)/%,$(objects)) :
+ @$(CHECK)
+
+$(patsubst %,$(DIR_DL)/%,$(objects)) :
+ @$(LOAD)
+
+$(subst %,%_MD5,$(objects)) :
+ @$(MD5)
+
+###############################################################################
+# Installation Details
+###############################################################################
+
+$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
+ @$(PREBUILD)
+ @cd / && tar axf $(DIR_DL)/$(DL_FILE)
+ @$(POSTBUILD)
include Config
-VER = 2011.06
+VER = 2011.12
+# Linare version: git clone git://git.linaro.org/boot/u-boot-linaro-stable.git
+# Branch: origin/Linaro-u-boot-2011.12
-THISAPP = u-boot-$(VER)
-DL_FILE = $(THISAPP).tar.bz2
+THISAPP = uboot-panda-$(VER)
+DL_FILE = $(THISAPP).tar.xz
DL_FROM = $(URL_IPFIRE)
DIR_APP = $(DIR_SRC)/$(THISAPP)
TARGET = $(DIR_INFO)/$(THISAPP)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_MD5 = 0cc5026aad02f218a9b9ac56b301c97a
+$(DL_FILE)_MD5 = 19975e9bb4b10d8e67db84e51fcaa43b
install : $(TARGET)
$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
@$(PREBUILD)
- @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar jxf $(DIR_DL)/$(DL_FILE)
+ @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar Jxf $(DIR_DL)/$(DL_FILE)
cd $(DIR_APP) && make tools $(MAKETUNING)
cd $(DIR_APP) && install tools/mkimage /usr/bin/
+ cd $(DIR_APP) && make omap4_panda_config
+ cd $(DIR_APP) && make $(MAKETUNING)
+ cd $(DIR_APP) && install MLO /boot/
+ cd $(DIR_APP) && install u-boot.bin /boot/
+ cp -vf $(DIR_SRC)/config/u-boot/* /boot/
@rm -rf $(DIR_APP)
@$(POSTBUILD)
###############################################################################
# #
# IPFire.org - A linux based firewall #
-# Copyright (C) 2005-2010 IPFire Team <info@ipfire.org> #
+# Copyright (C) 2007-2012 IPFire Team <info@ipfire.org> #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
@$(PREBUILD)
@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE)
cd $(DIR_APP) && patch -Np1 -i $(DIR_SRC)/src/patches/udev-125-netif_rename.patch
-ifeq "$(LFS_PASS)" "install"
- cd $(DIR_APP) && make DESTDIR=/install/initrd sbindir=/sbin udevdir=/dev
- cd $(DIR_APP) && make DESTDIR=/install/initrd sbindir=/sbin udevdir=/dev install
- rm -f /install/initrd/sbin/udev* /install/initrd/usr/sbin/udev* /install/initrd/usr/bin/udev*
- cd $(DIR_APP) && install udevadm udevd /install/initrd/sbin
- cd $(DIR_APP) && make $(MAKETUNING) EXTRAS="extras/ata_id extras/cdrom_id extras/edd_id \
- extras/firmware extras/floppy extras/path_id \
- extras/scsi_id extras/usb_id extras/volume_id"
- cd $(DIR_APP) && make DESTDIR=/install/initrd EXTRAS="extras/ata_id extras/cdrom_id extras/edd_id \
- extras/firmware extras/floppy extras/path_id \
- extras/scsi_id extras/usb_id extras/volume_id" install
- cd /install/initrd/usr/share && rm -rf man
- -mkdir -pv /install/initrd/dev
- cd /install/initrd/dev && rm -f console
- cd /install/initrd/dev && mknod -m 0600 console c 5 1
- cd /install/initrd/dev && rm -f null
- cd /install/initrd/dev && mknod -m 0777 null c 1 3
- cd /install/initrd/dev && rm -f tty*
- cd /install/initrd/dev && mknod -m 0600 tty1 c 4 1
- cd /install/initrd/dev && mknod -m 0600 tty2 c 4 2
- cd /install/initrd/dev && mknod -m 0600 tty3 c 4 3
- cd /install/initrd/dev && mknod -m 0600 tty4 c 4 4
- cd /install/initrd/dev && mknod -m 0600 tty5 c 4 5
- cd /install/initrd/dev && mknod -m 0600 tty6 c 4 6
- cp -f /etc/udev/rules.d/55-scsi-cdrom.rules /install/initrd/etc/udev/rules.d/55-scsi-cdrom.rules
-
-else
+ cd $(DIR_APP) && patch -Np1 -i $(DIR_SRC)/src/patches/udev-125-ext4_wo_journal.patch
rm -rf /lib/udev/devices
cd $(DIR_APP) && tar jxf $(DIR_DL)/udev-config-6.2.tar.bz2
cd $(DIR_APP) && patch -Np0 -i $(DIR_SRC)/src/patches/udev-config-6.2_persistent-storage-fix.patch
chmod 755 /etc/udev/dvb.sh
touch /etc/udev/rules.d/30-persistent-network.rules
cp -vf $(DIR_SRC)/config/udev/blacklist /etc/modprobe.d/blacklist
-endif
@rm -rf $(DIR_APP)
@$(POSTBUILD)
###############################################################################
# #
# IPFire.org - A linux based firewall #
-# Copyright (C) 2007-2011 IPFire Team <info@ipfire.org> #
+# Copyright (C) 2007-2012 IPFire Team <info@ipfire.org> #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
VERSUFIX=ipfire$(KCFG)
-VER = git20110427
-
+VER = 20111225
THISAPP = v4l-dvb-$(VER)
DL_FILE = $(THISAPP).tar.xz
DL_FROM = $(URL_IPFIRE)
DIR_APP = $(DIR_SRC)/$(THISAPP)
-PAK_VER = 2
TARGET = $(DIR_INFO)/$(THISAPP)-kmod-$(KVER)-$(VERSUFIX)
###############################################################################
# Top-level Rules
###############################################################################
-objects = $(DL_FILE)
+objects = $(DL_FILE) v4l-dvb_update_it913x_1_25.patch.gz
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
+v4l-dvb_update_it913x_1_25.patch.gz = $(DL_FROM)/v4l-dvb_update_it913x_1_25.patch.gz
-$(DL_FILE)_MD5 = 8b83a89332fe8468ebffd516a4a47128
+$(DL_FILE)_MD5 = 264c5f4ad7aad8dd2960799c80a7908c
+v4l-dvb_update_it913x_1_25.patch.gz_MD5 = c3e397bd64f618edbfcaa56466cdbf14
install : $(TARGET)
md5 : $(subst %,%_MD5,$(objects))
-dist:
- $(PAK)
-
###############################################################################
# Downloading, checking, md5sum
###############################################################################
$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
@$(PREBUILD)
@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar Jxf $(DIR_DL)/$(DL_FILE)
+ cd $(DIR_APP)/linux && zcat $(DIR_DL)/v4l-dvb_update_it913x_1_25.patch.gz | \
+ patch -Np1
+ cd $(DIR_APP) && make allyesconfig KERNELRELEASE=$(KVER)-$(VERSUFIX) VER=2.6.32
cd $(DIR_APP) && make all KERNELRELEASE=$(KVER)-$(VERSUFIX) VER=2.6.32
cd $(DIR_APP) && make install KERNELRELEASE=$(KVER)-$(VERSUFIX) VER=2.6.32
ln -sf $(DIR_APP)/ /usr/src/v4l-dvb
-# @rm -rf $(DIR_APP)
@$(POSTBUILD)
ipfiremake xz
ipfiremake linux-firmware
ipfiremake zd1211-firmware
+ ipfiremake rpi-firmware
ipfiremake fw_ath9k_htc
ipfiremake u-boot
ipfiremake e1000e KCFG=""
ipfiremake igb KCFG=""
else
+ # arm-omap kernel build
+ ipfiremake linux3 KCFG="-rpi"
+
+ ipfiremake linux3 KCFG="-omap"
+
# arm-versatile kernel build
ipfiremake linux KCFG="-versatile"
ipfiremake v4l-dvb KCFG="-versatile"
########################################################################
# Begin $rc_base/init.d/fsresize
#
-# Description : Resize the /var filesystem
+# Description : Resize the root filesystem in the background
#
# Authors : Arne Fitzenreiter - arne_f@ipfire.org
#
-# Version : 1.00
+# Version : 1.01
#
# Notes :
#
case "${1}" in
start)
- boot_mesg "Mounting root file system in read/write mode ..."
- mount -o remount,rw / > /dev/null
- evaluate_retval
-
- boot_mesg "Autoresize /var partition to use the whole drive ..."
+ boot_mesg "Background Autoresize root partition to use the whole drive"
# Detect device
ROOT=`mount | grep -m1 " / " | cut -d" " -f1`;
DRV=${ROOT::`expr length $ROOT`-1}
- boot_mesg " * check filesystem on ${DRV}4 before resize ..."
- fsck -f -y ${DRV}4
- boot_mesg " * resize ${DRV}4 ..."
- resize2fs -p ${DRV}4
- evaluate_retval
+ boot_mesg "resize ${DRV}3 ..."
+ nice -n 19 $0 background ${DRV}3 > /dev/null &
+ ;;
+ background)
+ resize2fs -p $2
# Erase symlink, it should run only once
- rm -f /etc/rc.d/rcsysinit.d/S26fsresize
+ rm -f /etc/rc.d/rcsysinit.d/S42fsresize
sync
-
exit 0;
+
;;
+
*)
echo "Usage: ${0} {start}"
exit 1
########################################################################
# Begin $rc_base/init.d/partresize
#
-# Description : Resize the /var partition to the drivesize
+# Description : Resize the root partition to the drivesize
#
# Authors : Arne Fitzenreiter - arne_f@ipfire.org
#
-# Version : 1.00
+# Version : 1.01
#
# Notes :
#
# Detect device
ROOT=`mount | grep -m1 " / " | cut -d" " -f1`;
- DRV=${ROOT::`expr length $ROOT`-1}
-
- boot_mesg "Change Partition 4 to all free space ..."
- echo -e 'd\n4\nn\np\n4\n\n\nw\nq\n' | fdisk ${DRV}
+ if [ "${ROOT:`expr length $ROOT`-2:1}" == "p" ]; then
+ DRV=${ROOT::`expr length $ROOT`-2}
+ else
+ DRV=${ROOT::`expr length $ROOT`-1}
+ fi
+
+ boot_mesg "Change Partition ${DRV}3 to all free space ..."
+ echo -e 'd\n3\nn\np\n3\n\n\nw\nq\n' | fdisk ${DRV}
# Erase symlink, it should run only once
rm -f /etc/rc.d/rcsysinit.d/S25partresize
###############################################################################
# #
# IPFire.org - A linux based firewall #
-# Copyright (C) 2009 Michael Tremer & Christian Schmidt #
+# Copyright (C) 2011 IPFire Team <info@ipfire.org> #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
if [ ! "$hwaddr" == "00:00:00:00:00:00" ];then
if [ ! "$hwaddr" == "ff:ff:ff:ff:ff:ff" ];then
- driver=`grep PHYSDEVDRIVER= /sys/class/net/$card/uevent | cut -d"=" -f2`
- type=`grep PHYSDEVBUS= /sys/class/net/$card/uevent | cut -d"=" -f2`
+ driver=`grep DRIVER= /sys/class/net/$card/device/uevent | cut -d"=" -f2`
+ type=`grep MODALIAS= /sys/class/net/$card/device/uevent | cut -d"=" -f2 | cut -d":" -f1`
- #Default if not avaiable in /sys/class/net
+ #Default if not available in /sys/class/net
if [ "a$type" == "a" ]; then
type="???"
fi
--- /dev/null
+diff -Naur compat-wireless-3.2.5-1.org/compat/compat_atomic.c compat-wireless-3.2.5-1/compat/compat_atomic.c
+--- compat-wireless-3.2.5-1.org/compat/compat_atomic.c 2012-02-07 04:45:51.000000000 +0100
++++ compat-wireless-3.2.5-1/compat/compat_atomic.c 2012-02-18 15:39:42.000000000 +0100
+@@ -3,6 +3,8 @@
+
+ #if !((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,31)) && (defined(CONFIG_UML) || defined(CONFIG_X86))) && !((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33)) && defined(CONFIG_ARM) && !defined(CONFIG_GENERIC_ATOMIC64))
+
++#include <asm-generic/atomic64.h>
++
+ static DEFINE_SPINLOCK(lock);
+
+ long long atomic64_read(const atomic64_t *v)
+diff -Naur compat-wireless-3.2.5-1.org/compat/Makefile compat-wireless-3.2.5-1/compat/Makefile
+--- compat-wireless-3.2.5-1.org/compat/Makefile 2012-02-07 05:25:54.000000000 +0100
++++ compat-wireless-3.2.5-1/compat/Makefile 2012-02-18 13:35:18.000000000 +0100
+@@ -38,3 +38,9 @@
+ cordic.o \
+ crc8.o
+
++
++ifndef CONFIG_64BIT
++ifndef CONFIG_GENERIC_ATOMIC64
++ compat-y += compat_atomic.o
++endif
++endif
+diff -Naur compat-wireless-3.2.5-1.org/net/mac80211/key.h compat-wireless-3.2.5-1/net/mac80211/key.h
+--- compat-wireless-3.2.5-1.org/net/mac80211/key.h 2012-02-07 05:25:53.000000000 +0100
++++ compat-wireless-3.2.5-1/net/mac80211/key.h 2012-02-18 15:40:44.000000000 +0100
+@@ -32,6 +32,8 @@
+
+ #define NUM_RX_DATA_QUEUES 16
+
++#include <asm-generic/atomic64.h>
++
+ struct ieee80211_local;
+ struct ieee80211_sub_if_data;
+ struct sta_info;
--- /dev/null
+From 398aa66827155ef52bab58bebd24597d90968929 Mon Sep 17 00:00:00 2001
+From: Will Deacon <will.deacon@arm.com>
+Date: Thu, 8 Jul 2010 10:59:16 +0100
+Subject: [PATCH] ARM: 6212/1: atomic ops: add memory constraints to inline
+ asm
+
+Currently, the 32-bit and 64-bit atomic operations on ARM do not
+include memory constraints in the inline assembly blocks. In the
+case of barrier-less operations [for example, atomic_add], this
+means that the compiler may constant fold values which have actually
+been modified by a call to an atomic operation.
+
+This issue can be observed in the atomic64_test routine in
+<kernel root>/lib/atomic64_test.c:
+
+00000000 <test_atomic64>:
+ 0: e1a0c00d mov ip, sp
+ 4: e92dd830 push {r4, r5, fp, ip, lr, pc}
+ 8: e24cb004 sub fp, ip, #4
+ c: e24dd008 sub sp, sp, #8
+ 10: e24b3014 sub r3, fp, #20
+ 14: e30d000d movw r0, #53261 ; 0xd00d
+ 18: e3011337 movw r1, #4919 ; 0x1337
+ 1c: e34c0001 movt r0, #49153 ; 0xc001
+ 20: e34a1aa3 movt r1, #43683 ; 0xaaa3
+ 24: e16300f8 strd r0, [r3, #-8]!
+ 28: e30c0afe movw r0, #51966 ; 0xcafe
+ 2c: e30b1eef movw r1, #48879 ; 0xbeef
+ 30: e34d0eaf movt r0, #57007 ; 0xdeaf
+ 34: e34d1ead movt r1, #57005 ; 0xdead
+ 38: e1b34f9f ldrexd r4, [r3]
+ 3c: e1a34f90 strexd r4, r0, [r3]
+ 40: e3340000 teq r4, #0
+ 44: 1afffffb bne 38 <test_atomic64+0x38>
+ 48: e59f0004 ldr r0, [pc, #4] ; 54 <test_atomic64+0x54>
+ 4c: e3a0101e mov r1, #30
+ 50: ebfffffe bl 0 <__bug>
+ 54: 00000000 .word 0x00000000
+
+The atomic64_set (0x38-0x44) writes to the atomic64_t, but the
+compiler doesn't see this, assumes the test condition is always
+false and generates an unconditional branch to __bug. The rest of the
+test is optimised away.
+
+This patch adds suitable memory constraints to the atomic operations on ARM
+to ensure that the compiler is informed of the correct data hazards. We have
+to use the "Qo" constraints to avoid hitting the GCC anomaly described at
+http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44492 , where the compiler
+makes assumptions about the writeback in the addressing mode used by the
+inline assembly. These constraints forbid the use of auto{inc,dec} addressing
+modes, so it doesn't matter if we don't use the operand exactly once.
+
+Cc: stable@kernel.org
+Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org>
+Signed-off-by: Will Deacon <will.deacon@arm.com>
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+ arch/arm/include/asm/atomic.h | 132 ++++++++++++++++++++--------------------
+ 1 files changed, 66 insertions(+), 66 deletions(-)
+
+diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
+index e9e56c0..7e79503 100644
+--- a/arch/arm/include/asm/atomic.h
++++ b/arch/arm/include/asm/atomic.h
+@@ -40,12 +40,12 @@ static inline void atomic_add(int i, atomic_t *v)
+ int result;
+
+ __asm__ __volatile__("@ atomic_add\n"
+-"1: ldrex %0, [%2]\n"
+-" add %0, %0, %3\n"
+-" strex %1, %0, [%2]\n"
++"1: ldrex %0, [%3]\n"
++" add %0, %0, %4\n"
++" strex %1, %0, [%3]\n"
+ " teq %1, #0\n"
+ " bne 1b"
+- : "=&r" (result), "=&r" (tmp)
++ : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
+ : "r" (&v->counter), "Ir" (i)
+ : "cc");
+ }
+@@ -58,12 +58,12 @@ static inline int atomic_add_return(int i, atomic_t *v)
+ smp_mb();
+
+ __asm__ __volatile__("@ atomic_add_return\n"
+-"1: ldrex %0, [%2]\n"
+-" add %0, %0, %3\n"
+-" strex %1, %0, [%2]\n"
++"1: ldrex %0, [%3]\n"
++" add %0, %0, %4\n"
++" strex %1, %0, [%3]\n"
+ " teq %1, #0\n"
+ " bne 1b"
+- : "=&r" (result), "=&r" (tmp)
++ : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
+ : "r" (&v->counter), "Ir" (i)
+ : "cc");
+
+@@ -78,12 +78,12 @@ static inline void atomic_sub(int i, atomic_t *v)
+ int result;
+
+ __asm__ __volatile__("@ atomic_sub\n"
+-"1: ldrex %0, [%2]\n"
+-" sub %0, %0, %3\n"
+-" strex %1, %0, [%2]\n"
++"1: ldrex %0, [%3]\n"
++" sub %0, %0, %4\n"
++" strex %1, %0, [%3]\n"
+ " teq %1, #0\n"
+ " bne 1b"
+- : "=&r" (result), "=&r" (tmp)
++ : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
+ : "r" (&v->counter), "Ir" (i)
+ : "cc");
+ }
+@@ -96,12 +96,12 @@ static inline int atomic_sub_return(int i, atomic_t *v)
+ smp_mb();
+
+ __asm__ __volatile__("@ atomic_sub_return\n"
+-"1: ldrex %0, [%2]\n"
+-" sub %0, %0, %3\n"
+-" strex %1, %0, [%2]\n"
++"1: ldrex %0, [%3]\n"
++" sub %0, %0, %4\n"
++" strex %1, %0, [%3]\n"
+ " teq %1, #0\n"
+ " bne 1b"
+- : "=&r" (result), "=&r" (tmp)
++ : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
+ : "r" (&v->counter), "Ir" (i)
+ : "cc");
+
+@@ -118,11 +118,11 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
+
+ do {
+ __asm__ __volatile__("@ atomic_cmpxchg\n"
+- "ldrex %1, [%2]\n"
++ "ldrex %1, [%3]\n"
+ "mov %0, #0\n"
+- "teq %1, %3\n"
+- "strexeq %0, %4, [%2]\n"
+- : "=&r" (res), "=&r" (oldval)
++ "teq %1, %4\n"
++ "strexeq %0, %5, [%3]\n"
++ : "=&r" (res), "=&r" (oldval), "+Qo" (ptr->counter)
+ : "r" (&ptr->counter), "Ir" (old), "r" (new)
+ : "cc");
+ } while (res);
+@@ -137,12 +137,12 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+ unsigned long tmp, tmp2;
+
+ __asm__ __volatile__("@ atomic_clear_mask\n"
+-"1: ldrex %0, [%2]\n"
+-" bic %0, %0, %3\n"
+-" strex %1, %0, [%2]\n"
++"1: ldrex %0, [%3]\n"
++" bic %0, %0, %4\n"
++" strex %1, %0, [%3]\n"
+ " teq %1, #0\n"
+ " bne 1b"
+- : "=&r" (tmp), "=&r" (tmp2)
++ : "=&r" (tmp), "=&r" (tmp2), "+Qo" (*addr)
+ : "r" (addr), "Ir" (mask)
+ : "cc");
+ }
+@@ -249,7 +249,7 @@ static inline u64 atomic64_read(atomic64_t *v)
+ __asm__ __volatile__("@ atomic64_read\n"
+ " ldrexd %0, %H0, [%1]"
+ : "=&r" (result)
+- : "r" (&v->counter)
++ : "r" (&v->counter), "Qo" (v->counter)
+ );
+
+ return result;
+@@ -260,11 +260,11 @@ static inline void atomic64_set(atomic64_t *v, u64 i)
+ u64 tmp;
+
+ __asm__ __volatile__("@ atomic64_set\n"
+-"1: ldrexd %0, %H0, [%1]\n"
+-" strexd %0, %2, %H2, [%1]\n"
++"1: ldrexd %0, %H0, [%2]\n"
++" strexd %0, %3, %H3, [%2]\n"
+ " teq %0, #0\n"
+ " bne 1b"
+- : "=&r" (tmp)
++ : "=&r" (tmp), "=Qo" (v->counter)
+ : "r" (&v->counter), "r" (i)
+ : "cc");
+ }
+@@ -275,13 +275,13 @@ static inline void atomic64_add(u64 i, atomic64_t *v)
+ unsigned long tmp;
+
+ __asm__ __volatile__("@ atomic64_add\n"
+-"1: ldrexd %0, %H0, [%2]\n"
+-" adds %0, %0, %3\n"
+-" adc %H0, %H0, %H3\n"
+-" strexd %1, %0, %H0, [%2]\n"
++"1: ldrexd %0, %H0, [%3]\n"
++" adds %0, %0, %4\n"
++" adc %H0, %H0, %H4\n"
++" strexd %1, %0, %H0, [%3]\n"
+ " teq %1, #0\n"
+ " bne 1b"
+- : "=&r" (result), "=&r" (tmp)
++ : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
+ : "r" (&v->counter), "r" (i)
+ : "cc");
+ }
+@@ -294,13 +294,13 @@ static inline u64 atomic64_add_return(u64 i, atomic64_t *v)
+ smp_mb();
+
+ __asm__ __volatile__("@ atomic64_add_return\n"
+-"1: ldrexd %0, %H0, [%2]\n"
+-" adds %0, %0, %3\n"
+-" adc %H0, %H0, %H3\n"
+-" strexd %1, %0, %H0, [%2]\n"
++"1: ldrexd %0, %H0, [%3]\n"
++" adds %0, %0, %4\n"
++" adc %H0, %H0, %H4\n"
++" strexd %1, %0, %H0, [%3]\n"
+ " teq %1, #0\n"
+ " bne 1b"
+- : "=&r" (result), "=&r" (tmp)
++ : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
+ : "r" (&v->counter), "r" (i)
+ : "cc");
+
+@@ -315,13 +315,13 @@ static inline void atomic64_sub(u64 i, atomic64_t *v)
+ unsigned long tmp;
+
+ __asm__ __volatile__("@ atomic64_sub\n"
+-"1: ldrexd %0, %H0, [%2]\n"
+-" subs %0, %0, %3\n"
+-" sbc %H0, %H0, %H3\n"
+-" strexd %1, %0, %H0, [%2]\n"
++"1: ldrexd %0, %H0, [%3]\n"
++" subs %0, %0, %4\n"
++" sbc %H0, %H0, %H4\n"
++" strexd %1, %0, %H0, [%3]\n"
+ " teq %1, #0\n"
+ " bne 1b"
+- : "=&r" (result), "=&r" (tmp)
++ : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
+ : "r" (&v->counter), "r" (i)
+ : "cc");
+ }
+@@ -334,13 +334,13 @@ static inline u64 atomic64_sub_return(u64 i, atomic64_t *v)
+ smp_mb();
+
+ __asm__ __volatile__("@ atomic64_sub_return\n"
+-"1: ldrexd %0, %H0, [%2]\n"
+-" subs %0, %0, %3\n"
+-" sbc %H0, %H0, %H3\n"
+-" strexd %1, %0, %H0, [%2]\n"
++"1: ldrexd %0, %H0, [%3]\n"
++" subs %0, %0, %4\n"
++" sbc %H0, %H0, %H4\n"
++" strexd %1, %0, %H0, [%3]\n"
+ " teq %1, #0\n"
+ " bne 1b"
+- : "=&r" (result), "=&r" (tmp)
++ : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
+ : "r" (&v->counter), "r" (i)
+ : "cc");
+
+@@ -358,12 +358,12 @@ static inline u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old, u64 new)
+
+ do {
+ __asm__ __volatile__("@ atomic64_cmpxchg\n"
+- "ldrexd %1, %H1, [%2]\n"
++ "ldrexd %1, %H1, [%3]\n"
+ "mov %0, #0\n"
+- "teq %1, %3\n"
+- "teqeq %H1, %H3\n"
+- "strexdeq %0, %4, %H4, [%2]"
+- : "=&r" (res), "=&r" (oldval)
++ "teq %1, %4\n"
++ "teqeq %H1, %H4\n"
++ "strexdeq %0, %5, %H5, [%3]"
++ : "=&r" (res), "=&r" (oldval), "+Qo" (ptr->counter)
+ : "r" (&ptr->counter), "r" (old), "r" (new)
+ : "cc");
+ } while (res);
+@@ -381,11 +381,11 @@ static inline u64 atomic64_xchg(atomic64_t *ptr, u64 new)
+ smp_mb();
+
+ __asm__ __volatile__("@ atomic64_xchg\n"
+-"1: ldrexd %0, %H0, [%2]\n"
+-" strexd %1, %3, %H3, [%2]\n"
++"1: ldrexd %0, %H0, [%3]\n"
++" strexd %1, %4, %H4, [%3]\n"
+ " teq %1, #0\n"
+ " bne 1b"
+- : "=&r" (result), "=&r" (tmp)
++ : "=&r" (result), "=&r" (tmp), "+Qo" (ptr->counter)
+ : "r" (&ptr->counter), "r" (new)
+ : "cc");
+
+@@ -402,16 +402,16 @@ static inline u64 atomic64_dec_if_positive(atomic64_t *v)
+ smp_mb();
+
+ __asm__ __volatile__("@ atomic64_dec_if_positive\n"
+-"1: ldrexd %0, %H0, [%2]\n"
++"1: ldrexd %0, %H0, [%3]\n"
+ " subs %0, %0, #1\n"
+ " sbc %H0, %H0, #0\n"
+ " teq %H0, #0\n"
+ " bmi 2f\n"
+-" strexd %1, %0, %H0, [%2]\n"
++" strexd %1, %0, %H0, [%3]\n"
+ " teq %1, #0\n"
+ " bne 1b\n"
+ "2:"
+- : "=&r" (result), "=&r" (tmp)
++ : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
+ : "r" (&v->counter)
+ : "cc");
+
+@@ -429,18 +429,18 @@ static inline int atomic64_add_unless(atomic64_t *v, u64 a, u64 u)
+ smp_mb();
+
+ __asm__ __volatile__("@ atomic64_add_unless\n"
+-"1: ldrexd %0, %H0, [%3]\n"
+-" teq %0, %4\n"
+-" teqeq %H0, %H4\n"
++"1: ldrexd %0, %H0, [%4]\n"
++" teq %0, %5\n"
++" teqeq %H0, %H5\n"
+ " moveq %1, #0\n"
+ " beq 2f\n"
+-" adds %0, %0, %5\n"
+-" adc %H0, %H0, %H5\n"
+-" strexd %2, %0, %H0, [%3]\n"
++" adds %0, %0, %6\n"
++" adc %H0, %H0, %H6\n"
++" strexd %2, %0, %H0, [%4]\n"
+ " teq %2, #0\n"
+ " bne 1b\n"
+ "2:"
+- : "=&r" (val), "+r" (ret), "=&r" (tmp)
++ : "=&r" (val), "+r" (ret), "=&r" (tmp), "+Qo" (v->counter)
+ : "r" (&v->counter), "r" (u), "r" (a)
+ : "cc");
+
+--
+1.7.6.2
+
--- /dev/null
+From 0328ac267564089d9cedfb568f936d30a6debd21 Mon Sep 17 00:00:00 2001
+From: Uri Simchoni <uri@jdland.co.il>
+Date: Thu, 8 Apr 2010 19:25:37 +0300
+Subject: [PATCH] crypto: mv_cesa - Invoke the user callback from a softirq
+ context
+
+Invoke the user callback from a softirq context
+
+Signed-off-by: Uri Simchoni <uri@jdland.co.il>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+---
+ drivers/crypto/mv_cesa.c | 2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
+index b21ef63..3e60ba9 100644
+--- a/drivers/crypto/mv_cesa.c
++++ b/drivers/crypto/mv_cesa.c
+@@ -275,7 +275,9 @@ static void dequeue_complete_req(void)
+ sg_miter_stop(&cpg->p.dst_sg_it);
+ mv_crypto_algo_completion();
+ cpg->eng_st = ENGINE_IDLE;
++ local_bh_disable();
+ req->base.complete(&req->base, 0);
++ local_bh_enable();
+ }
+ }
+
+--
+1.7.6.5
+From 6bc6fcd609080461682c5cc0a1e3bf4345d6419d Mon Sep 17 00:00:00 2001
+From: Uri Simchoni <uri@jdland.co.il>
+Date: Thu, 8 Apr 2010 19:25:56 +0300
+Subject: [PATCH] crypto: mv_cesa - Remove compiler warning in mv_cesa driver
+
+Remove compiler warning
+
+Signed-off-by: Uri Simchoni <uri@jdland.co.il>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+---
+ drivers/crypto/mv_cesa.c | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
+index 3e60ba9..37d9f06 100644
+--- a/drivers/crypto/mv_cesa.c
++++ b/drivers/crypto/mv_cesa.c
+@@ -178,6 +178,7 @@ static void mv_process_current_q(int first_block)
+ op.config = CFG_OP_CRYPT_ONLY | CFG_ENCM_AES | CFG_ENC_MODE_ECB;
+ break;
+ case COP_AES_CBC:
++ default:
+ op.config = CFG_OP_CRYPT_ONLY | CFG_ENCM_AES | CFG_ENC_MODE_CBC;
+ op.enc_iv = ENC_IV_POINT(SRAM_DATA_IV) |
+ ENC_IV_BUF_POINT(SRAM_DATA_IV_BUF);
+--
+1.7.6.5
+X-Git-Url: http://git.kernelconcepts.de/?p=mv-sheeva.git;a=blobdiff_plain;f=drivers%2Fcrypto%2Fmv_cesa.c;h=018a95ce0c9b0d6e6a13bff1522630799bc445b3;hp=37d9f0688e7575a3e366f6bb9eda5adc5db807b5;hb=f565e67ec1b8f4a95d21550f9b879fe86b4132e0;hpb=6bc6fcd609080461682c5cc0a1e3bf4345d6419d
+
+diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
+index 37d9f06..018a95c 100644
+--- a/drivers/crypto/mv_cesa.c
++++ b/drivers/crypto/mv_cesa.c
+@@ -242,6 +242,8 @@ static void dequeue_complete_req(void)
+ struct ablkcipher_request *req = cpg->cur_req;
+ void *buf;
+ int ret;
++ int need_copy_len = cpg->p.crypt_len;
++ int sram_offset = 0;
+
+ cpg->p.total_req_bytes += cpg->p.crypt_len;
+ do {
+@@ -257,14 +259,16 @@ static void dequeue_complete_req(void)
+ buf = cpg->p.dst_sg_it.addr;
+ buf += cpg->p.dst_start;
+
+- dst_copy = min(cpg->p.crypt_len, cpg->p.sg_dst_left);
+-
+- memcpy(buf, cpg->sram + SRAM_DATA_OUT_START, dst_copy);
++ dst_copy = min(need_copy_len, cpg->p.sg_dst_left);
+
++ memcpy(buf,
++ cpg->sram + SRAM_DATA_OUT_START + sram_offset,
++ dst_copy);
++ sram_offset += dst_copy;
+ cpg->p.sg_dst_left -= dst_copy;
+- cpg->p.crypt_len -= dst_copy;
++ need_copy_len -= dst_copy;
+ cpg->p.dst_start += dst_copy;
+- } while (cpg->p.crypt_len > 0);
++ } while (need_copy_len > 0);
+
+ BUG_ON(cpg->eng_st != ENGINE_W_DEQUEUE);
+ if (cpg->p.total_req_bytes < req->nbytes) {
+From 15d4dd3594221f11a7730fcf2d5f9942b96cdd7e Mon Sep 17 00:00:00 2001
+From: Uri Simchoni <uri@jdland.co.il>
+Date: Thu, 8 Apr 2010 19:27:02 +0300
+Subject: [PATCH] crypto: mv_cesa - Fix situations where the src sglist spans
+ more data than the request asks for
+
+Fix for situations where the source scatterlist spans more data than the
+request nbytes
+
+Signed-off-by: Uri Simchoni <uri@jdland.co.il>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+---
+ drivers/crypto/mv_cesa.c | 66 ++++++++++++++++++++++++++++++---------------
+ 1 files changed, 44 insertions(+), 22 deletions(-)
+
+diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
+index 018a95c..096f9ff 100644
+--- a/drivers/crypto/mv_cesa.c
++++ b/drivers/crypto/mv_cesa.c
+@@ -143,27 +143,45 @@ static int mv_setkey_aes(struct crypto_ablkcipher *cipher, const u8 *key,
+ return 0;
+ }
+
+-static void setup_data_in(struct ablkcipher_request *req)
++static void copy_src_to_buf(struct req_progress *p, char *dbuf, int len)
+ {
+ int ret;
+- void *buf;
+-
+- if (!cpg->p.sg_src_left) {
+- ret = sg_miter_next(&cpg->p.src_sg_it);
+- BUG_ON(!ret);
+- cpg->p.sg_src_left = cpg->p.src_sg_it.length;
+- cpg->p.src_start = 0;
+- }
++ void *sbuf;
++ int copied = 0;
+
+- cpg->p.crypt_len = min(cpg->p.sg_src_left, cpg->max_req_size);
+-
+- buf = cpg->p.src_sg_it.addr;
+- buf += cpg->p.src_start;
++ while (1) {
++ if (!p->sg_src_left) {
++ ret = sg_miter_next(&p->src_sg_it);
++ BUG_ON(!ret);
++ p->sg_src_left = p->src_sg_it.length;
++ p->src_start = 0;
++ }
+
+- memcpy(cpg->sram + SRAM_DATA_IN_START, buf, cpg->p.crypt_len);
++ sbuf = p->src_sg_it.addr + p->src_start;
++
++ if (p->sg_src_left <= len - copied) {
++ memcpy(dbuf + copied, sbuf, p->sg_src_left);
++ copied += p->sg_src_left;
++ p->sg_src_left = 0;
++ if (copied >= len)
++ break;
++ } else {
++ int copy_len = len - copied;
++ memcpy(dbuf + copied, sbuf, copy_len);
++ p->src_start += copy_len;
++ p->sg_src_left -= copy_len;
++ break;
++ }
++ }
++}
+
+- cpg->p.sg_src_left -= cpg->p.crypt_len;
+- cpg->p.src_start += cpg->p.crypt_len;
++static void setup_data_in(struct ablkcipher_request *req)
++{
++ struct req_progress *p = &cpg->p;
++ p->crypt_len =
++ min((int)req->nbytes - p->total_req_bytes, cpg->max_req_size);
++ copy_src_to_buf(p, cpg->sram + SRAM_DATA_IN_START,
++ p->crypt_len);
+ }
+
+ static void mv_process_current_q(int first_block)
+@@ -289,12 +307,16 @@ static void dequeue_complete_req(void)
+ static int count_sgs(struct scatterlist *sl, unsigned int total_bytes)
+ {
+ int i = 0;
+-
+- do {
+- total_bytes -= sl[i].length;
+- i++;
+-
+- } while (total_bytes > 0);
++ size_t cur_len;
++
++ while (1) {
++ cur_len = sl[i].length;
++ ++i;
++ if (total_bytes > cur_len)
++ total_bytes -= cur_len;
++ else
++ break;
++ }
+
+ return i;
+ }
+--
+1.7.6.5
+From 3b61a90502481045f56c1c41a2af35ee48ca8b80 Mon Sep 17 00:00:00 2001
+From: Uri Simchoni <uri@jdland.co.il>
+Date: Thu, 8 Apr 2010 19:27:33 +0300
+Subject: [PATCH] crypto: mv_cesa - Enqueue generic async requests
+
+Enqueue generic async requests rather than ablkcipher requests
+in the driver's queue
+
+Signed-off-by: Uri Simchoni <uri@jdland.co.il>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+---
+ drivers/crypto/mv_cesa.c | 43 ++++++++++++++++++++++++-------------------
+ 1 files changed, 24 insertions(+), 19 deletions(-)
+
+diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
+index 096f9ff..8891e2e 100644
+--- a/drivers/crypto/mv_cesa.c
++++ b/drivers/crypto/mv_cesa.c
+@@ -39,6 +39,7 @@ enum engine_status {
+ * @sg_src_left: bytes left in src to process (scatter list)
+ * @src_start: offset to add to src start position (scatter list)
+ * @crypt_len: length of current crypt process
++ * @hw_nbytes: total bytes to process in hw for this request
+ * @sg_dst_left: bytes left dst to process in this scatter list
+ * @dst_start: offset to add to dst start position (scatter list)
+ * @total_req_bytes: total number of bytes processed (request).
+@@ -55,6 +56,7 @@ struct req_progress {
+ int sg_src_left;
+ int src_start;
+ int crypt_len;
++ int hw_nbytes;
+ /* dst mostly */
+ int sg_dst_left;
+ int dst_start;
+@@ -71,7 +73,7 @@ struct crypto_priv {
+ spinlock_t lock;
+ struct crypto_queue queue;
+ enum engine_status eng_st;
+- struct ablkcipher_request *cur_req;
++ struct crypto_async_request *cur_req;
+ struct req_progress p;
+ int max_req_size;
+ int sram_size;
+@@ -175,18 +177,18 @@ static void copy_src_to_buf(struct req_progress *p, char *dbuf, int len)
+ }
+ }
+
+-static void setup_data_in(struct ablkcipher_request *req)
++static void setup_data_in(void)
+ {
+ struct req_progress *p = &cpg->p;
+ p->crypt_len =
+- min((int)req->nbytes - p->total_req_bytes, cpg->max_req_size);
++ min(p->hw_nbytes - p->total_req_bytes, cpg->max_req_size);
+ copy_src_to_buf(p, cpg->sram + SRAM_DATA_IN_START,
+ p->crypt_len);
+ }
+
+ static void mv_process_current_q(int first_block)
+ {
+- struct ablkcipher_request *req = cpg->cur_req;
++ struct ablkcipher_request *req = ablkcipher_request_cast(cpg->cur_req);
+ struct mv_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
+ struct mv_req_ctx *req_ctx = ablkcipher_request_ctx(req);
+ struct sec_accel_config op;
+@@ -229,7 +231,7 @@ static void mv_process_current_q(int first_block)
+ ENC_P_DST(SRAM_DATA_OUT_START);
+ op.enc_key_p = SRAM_DATA_KEY_P;
+
+- setup_data_in(req);
++ setup_data_in();
+ op.enc_len = cpg->p.crypt_len;
+ memcpy(cpg->sram + SRAM_CONFIG, &op,
+ sizeof(struct sec_accel_config));
+@@ -246,7 +248,7 @@ static void mv_process_current_q(int first_block)
+
+ static void mv_crypto_algo_completion(void)
+ {
+- struct ablkcipher_request *req = cpg->cur_req;
++ struct ablkcipher_request *req = ablkcipher_request_cast(cpg->cur_req);
+ struct mv_req_ctx *req_ctx = ablkcipher_request_ctx(req);
+
+ if (req_ctx->op != COP_AES_CBC)
+@@ -257,7 +259,7 @@ static void mv_crypto_algo_completion(void)
+
+ static void dequeue_complete_req(void)
+ {
+- struct ablkcipher_request *req = cpg->cur_req;
++ struct crypto_async_request *req = cpg->cur_req;
+ void *buf;
+ int ret;
+ int need_copy_len = cpg->p.crypt_len;
+@@ -289,7 +291,7 @@ static void dequeue_complete_req(void)
+ } while (need_copy_len > 0);
+
+ BUG_ON(cpg->eng_st != ENGINE_W_DEQUEUE);
+- if (cpg->p.total_req_bytes < req->nbytes) {
++ if (cpg->p.total_req_bytes < cpg->p.hw_nbytes) {
+ /* process next scatter list entry */
+ cpg->eng_st = ENGINE_BUSY;
+ mv_process_current_q(0);
+@@ -299,7 +301,7 @@ static void dequeue_complete_req(void)
+ mv_crypto_algo_completion();
+ cpg->eng_st = ENGINE_IDLE;
+ local_bh_disable();
+- req->base.complete(&req->base, 0);
++ req->complete(req, 0);
+ local_bh_enable();
+ }
+ }
+@@ -323,16 +325,19 @@ static int count_sgs(struct scatterlist *sl, unsigned int total_bytes)
+
+ static void mv_enqueue_new_req(struct ablkcipher_request *req)
+ {
++ struct req_progress *p = &cpg->p;
+ int num_sgs;
+
+- cpg->cur_req = req;
+- memset(&cpg->p, 0, sizeof(struct req_progress));
++ cpg->cur_req = &req->base;
++ memset(p, 0, sizeof(struct req_progress));
++ p->hw_nbytes = req->nbytes;
+
+ num_sgs = count_sgs(req->src, req->nbytes);
+- sg_miter_start(&cpg->p.src_sg_it, req->src, num_sgs, SG_MITER_FROM_SG);
++ sg_miter_start(&p->src_sg_it, req->src, num_sgs, SG_MITER_FROM_SG);
+
+ num_sgs = count_sgs(req->dst, req->nbytes);
+- sg_miter_start(&cpg->p.dst_sg_it, req->dst, num_sgs, SG_MITER_TO_SG);
++ sg_miter_start(&p->dst_sg_it, req->dst, num_sgs, SG_MITER_TO_SG);
++
+ mv_process_current_q(1);
+ }
+
+@@ -378,13 +383,13 @@ static int queue_manag(void *data)
+ return 0;
+ }
+
+-static int mv_handle_req(struct ablkcipher_request *req)
++static int mv_handle_req(struct crypto_async_request *req)
+ {
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&cpg->lock, flags);
+- ret = ablkcipher_enqueue_request(&cpg->queue, req);
++ ret = crypto_enqueue_request(&cpg->queue, req);
+ spin_unlock_irqrestore(&cpg->lock, flags);
+ wake_up_process(cpg->queue_th);
+ return ret;
+@@ -397,7 +402,7 @@ static int mv_enc_aes_ecb(struct ablkcipher_request *req)
+ req_ctx->op = COP_AES_ECB;
+ req_ctx->decrypt = 0;
+
+- return mv_handle_req(req);
++ return mv_handle_req(&req->base);
+ }
+
+ static int mv_dec_aes_ecb(struct ablkcipher_request *req)
+@@ -409,7 +414,7 @@ static int mv_dec_aes_ecb(struct ablkcipher_request *req)
+ req_ctx->decrypt = 1;
+
+ compute_aes_dec_key(ctx);
+- return mv_handle_req(req);
++ return mv_handle_req(&req->base);
+ }
+
+ static int mv_enc_aes_cbc(struct ablkcipher_request *req)
+@@ -419,7 +424,7 @@ static int mv_enc_aes_cbc(struct ablkcipher_request *req)
+ req_ctx->op = COP_AES_CBC;
+ req_ctx->decrypt = 0;
+
+- return mv_handle_req(req);
++ return mv_handle_req(&req->base);
+ }
+
+ static int mv_dec_aes_cbc(struct ablkcipher_request *req)
+@@ -431,7 +436,7 @@ static int mv_dec_aes_cbc(struct ablkcipher_request *req)
+ req_ctx->decrypt = 1;
+
+ compute_aes_dec_key(ctx);
+- return mv_handle_req(req);
++ return mv_handle_req(&req->base);
+ }
+
+ static int mv_cra_init(struct crypto_tfm *tfm)
+--
+1.7.6.5
+From 7a5f691ef03f4c01d2703b5ec4ddd4c17e645dec Mon Sep 17 00:00:00 2001
+From: Uri Simchoni <uri@jdland.co.il>
+Date: Thu, 8 Apr 2010 19:29:16 +0300
+Subject: [PATCH] crypto: mv_cesa - Rename a variable to a more suitable name
+
+Rename a variable to a more suitable name
+
+Signed-off-by: Uri Simchoni <uri@jdland.co.il>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+---
+ drivers/crypto/mv_cesa.c | 10 +++++-----
+ 1 files changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
+index 8891e2e..4262932 100644
+--- a/drivers/crypto/mv_cesa.c
++++ b/drivers/crypto/mv_cesa.c
+@@ -42,7 +42,7 @@ enum engine_status {
+ * @hw_nbytes: total bytes to process in hw for this request
+ * @sg_dst_left: bytes left dst to process in this scatter list
+ * @dst_start: offset to add to dst start position (scatter list)
+- * @total_req_bytes: total number of bytes processed (request).
++ * @hw_processed_bytes: number of bytes processed by hw (request).
+ *
+ * sg helper are used to iterate over the scatterlist. Since the size of the
+ * SRAM may be less than the scatter size, this struct struct is used to keep
+@@ -60,7 +60,7 @@ struct req_progress {
+ /* dst mostly */
+ int sg_dst_left;
+ int dst_start;
+- int total_req_bytes;
++ int hw_processed_bytes;
+ };
+
+ struct crypto_priv {
+@@ -181,7 +181,7 @@ static void setup_data_in(void)
+ {
+ struct req_progress *p = &cpg->p;
+ p->crypt_len =
+- min(p->hw_nbytes - p->total_req_bytes, cpg->max_req_size);
++ min(p->hw_nbytes - p->hw_processed_bytes, cpg->max_req_size);
+ copy_src_to_buf(p, cpg->sram + SRAM_DATA_IN_START,
+ p->crypt_len);
+ }
+@@ -265,7 +265,7 @@ static void dequeue_complete_req(void)
+ int need_copy_len = cpg->p.crypt_len;
+ int sram_offset = 0;
+
+- cpg->p.total_req_bytes += cpg->p.crypt_len;
++ cpg->p.hw_processed_bytes += cpg->p.crypt_len;
+ do {
+ int dst_copy;
+
+@@ -291,7 +291,7 @@ static void dequeue_complete_req(void)
+ } while (need_copy_len > 0);
+
+ BUG_ON(cpg->eng_st != ENGINE_W_DEQUEUE);
+- if (cpg->p.total_req_bytes < cpg->p.hw_nbytes) {
++ if (cpg->p.hw_processed_bytes < cpg->p.hw_nbytes) {
+ /* process next scatter list entry */
+ cpg->eng_st = ENGINE_BUSY;
+ mv_process_current_q(0);
+--
+1.6.5.GIT
+From a58094ac5f95d6969e5c52ff096d2fd2864542af Mon Sep 17 00:00:00 2001
+From: Uri Simchoni <uri@jdland.co.il>
+Date: Thu, 8 Apr 2010 19:30:19 +0300
+Subject: [PATCH] crypto: mv_cesa - Execute some code via function pointers
+ rathr than direct calls
+
+Execute some code via function pointers rathr than direct calls
+(to allow customization in the hashing request)
+
+Signed-off-by: Uri Simchoni <uri@jdland.co.il>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+---
+ drivers/crypto/mv_cesa.c | 13 +++++++++----
+ 1 files changed, 9 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
+index 4262932..2b4f07a 100644
+--- a/drivers/crypto/mv_cesa.c
++++ b/drivers/crypto/mv_cesa.c
+@@ -51,6 +51,8 @@ enum engine_status {
+ struct req_progress {
+ struct sg_mapping_iter src_sg_it;
+ struct sg_mapping_iter dst_sg_it;
++ void (*complete) (void);
++ void (*process) (int is_first);
+
+ /* src mostly */
+ int sg_src_left;
+@@ -251,6 +253,9 @@ static void mv_crypto_algo_completion(void)
+ struct ablkcipher_request *req = ablkcipher_request_cast(cpg->cur_req);
+ struct mv_req_ctx *req_ctx = ablkcipher_request_ctx(req);
+
++ sg_miter_stop(&cpg->p.src_sg_it);
++ sg_miter_stop(&cpg->p.dst_sg_it);
++
+ if (req_ctx->op != COP_AES_CBC)
+ return ;
+
+@@ -294,11 +299,9 @@ static void dequeue_complete_req(void)
+ if (cpg->p.hw_processed_bytes < cpg->p.hw_nbytes) {
+ /* process next scatter list entry */
+ cpg->eng_st = ENGINE_BUSY;
+- mv_process_current_q(0);
++ cpg->p.process(0);
+ } else {
+- sg_miter_stop(&cpg->p.src_sg_it);
+- sg_miter_stop(&cpg->p.dst_sg_it);
+- mv_crypto_algo_completion();
++ cpg->p.complete();
+ cpg->eng_st = ENGINE_IDLE;
+ local_bh_disable();
+ req->complete(req, 0);
+@@ -331,6 +334,8 @@ static void mv_enqueue_new_req(struct ablkcipher_request *req)
+ cpg->cur_req = &req->base;
+ memset(p, 0, sizeof(struct req_progress));
+ p->hw_nbytes = req->nbytes;
++ p->complete = mv_crypto_algo_completion;
++ p->process = mv_process_current_q;
+
+ num_sgs = count_sgs(req->src, req->nbytes);
+ sg_miter_start(&p->src_sg_it, req->src, num_sgs, SG_MITER_FROM_SG);
+--
+1.7.6.5
+X-Git-Url: http://git.kernelconcepts.de/?p=mv-sheeva.git;a=blobdiff_plain;f=drivers%2Fcrypto%2Fmv_cesa.c;h=49a22060fb51a46afff004ddade3dacf378aecd8;hp=2b4f07aa89e8ba7422de65eea027e06daa5f7797;hb=f0d03deaad05d9cc99cd2ee0475c9ecd726c19ae;hpb=a58094ac5f95d6969e5c52ff096d2fd2864542af
+
+diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
+index 2b4f07a..49a2206 100644
+--- a/drivers/crypto/mv_cesa.c
++++ b/drivers/crypto/mv_cesa.c
+@@ -40,6 +40,7 @@ enum engine_status {
+ * @src_start: offset to add to src start position (scatter list)
+ * @crypt_len: length of current crypt process
+ * @hw_nbytes: total bytes to process in hw for this request
++ * @copy_back: whether to copy data back (crypt) or not (hash)
+ * @sg_dst_left: bytes left dst to process in this scatter list
+ * @dst_start: offset to add to dst start position (scatter list)
+ * @hw_processed_bytes: number of bytes processed by hw (request).
+@@ -60,6 +61,7 @@ struct req_progress {
+ int crypt_len;
+ int hw_nbytes;
+ /* dst mostly */
++ int copy_back;
+ int sg_dst_left;
+ int dst_start;
+ int hw_processed_bytes;
+@@ -267,33 +269,35 @@ static void dequeue_complete_req(void)
+ struct crypto_async_request *req = cpg->cur_req;
+ void *buf;
+ int ret;
+- int need_copy_len = cpg->p.crypt_len;
+- int sram_offset = 0;
+-
+ cpg->p.hw_processed_bytes += cpg->p.crypt_len;
+- do {
+- int dst_copy;
++ if (cpg->p.copy_back) {
++ int need_copy_len = cpg->p.crypt_len;
++ int sram_offset = 0;
++ do {
++ int dst_copy;
++
++ if (!cpg->p.sg_dst_left) {
++ ret = sg_miter_next(&cpg->p.dst_sg_it);
++ BUG_ON(!ret);
++ cpg->p.sg_dst_left = cpg->p.dst_sg_it.length;
++ cpg->p.dst_start = 0;
++ }
+
+- if (!cpg->p.sg_dst_left) {
+- ret = sg_miter_next(&cpg->p.dst_sg_it);
+- BUG_ON(!ret);
+- cpg->p.sg_dst_left = cpg->p.dst_sg_it.length;
+- cpg->p.dst_start = 0;
+- }
++ buf = cpg->p.dst_sg_it.addr;
++ buf += cpg->p.dst_start;
+
+- buf = cpg->p.dst_sg_it.addr;
+- buf += cpg->p.dst_start;
++ dst_copy = min(need_copy_len, cpg->p.sg_dst_left);
+
+- dst_copy = min(need_copy_len, cpg->p.sg_dst_left);
++ memcpy(buf,
++ cpg->sram + SRAM_DATA_OUT_START + sram_offset,
++ dst_copy);
++ sram_offset += dst_copy;
++ cpg->p.sg_dst_left -= dst_copy;
++ need_copy_len -= dst_copy;
++ cpg->p.dst_start += dst_copy;
++ } while (need_copy_len > 0);
++ }
+
+- memcpy(buf,
+- cpg->sram + SRAM_DATA_OUT_START + sram_offset,
+- dst_copy);
+- sram_offset += dst_copy;
+- cpg->p.sg_dst_left -= dst_copy;
+- need_copy_len -= dst_copy;
+- cpg->p.dst_start += dst_copy;
+- } while (need_copy_len > 0);
+
+ BUG_ON(cpg->eng_st != ENGINE_W_DEQUEUE);
+ if (cpg->p.hw_processed_bytes < cpg->p.hw_nbytes) {
+@@ -336,6 +340,7 @@ static void mv_enqueue_new_req(struct ablkcipher_request *req)
+ p->hw_nbytes = req->nbytes;
+ p->complete = mv_crypto_algo_completion;
+ p->process = mv_process_current_q;
++ p->copy_back = 1;
+
+ num_sgs = count_sgs(req->src, req->nbytes);
+ sg_miter_start(&p->src_sg_it, req->src, num_sgs, SG_MITER_FROM_SG);
+From 0c5c6c4bae8fe9ae3d86b44c332eb1267df1ec99 Mon Sep 17 00:00:00 2001
+From: Uri Simchoni <uri@jdland.co.il>
+Date: Thu, 8 Apr 2010 19:33:26 +0300
+Subject: [PATCH] crypto: mv_cesa - Support processing of data from previous
+ requests
+
+Support processing of data from previous requests (as in hashing
+update/final requests).
+
+Signed-off-by: Uri Simchoni <uri@jdland.co.il>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+---
+ drivers/crypto/mv_cesa.c | 8 +++++---
+ 1 files changed, 5 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
+index 49a2206..d0fb10e 100644
+--- a/drivers/crypto/mv_cesa.c
++++ b/drivers/crypto/mv_cesa.c
+@@ -184,10 +184,11 @@ static void copy_src_to_buf(struct req_progress *p, char *dbuf, int len)
+ static void setup_data_in(void)
+ {
+ struct req_progress *p = &cpg->p;
+- p->crypt_len =
++ int data_in_sram =
+ min(p->hw_nbytes - p->hw_processed_bytes, cpg->max_req_size);
+- copy_src_to_buf(p, cpg->sram + SRAM_DATA_IN_START,
+- p->crypt_len);
++ copy_src_to_buf(p, cpg->sram + SRAM_DATA_IN_START + p->crypt_len,
++ data_in_sram - p->crypt_len);
++ p->crypt_len = data_in_sram;
+ }
+
+ static void mv_process_current_q(int first_block)
+@@ -298,6 +299,7 @@ static void dequeue_complete_req(void)
+ } while (need_copy_len > 0);
+ }
+
++ cpg->p.crypt_len = 0;
+
+ BUG_ON(cpg->eng_st != ENGINE_W_DEQUEUE);
+ if (cpg->p.hw_processed_bytes < cpg->p.hw_nbytes) {
+--
+1.7.6.5
-diff -Naur linux-2.6.32.45.org/arch/arm/mach-kirkwood/dreamplug-setup.c linux-2.6.32.45/arch/arm/mach-kirkwood/dreamplug-setup.c
---- linux-2.6.32.45.org/arch/arm/mach-kirkwood/dreamplug-setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.32.45/arch/arm/mach-kirkwood/dreamplug-setup.c 2011-10-11 15:35:37.000000000 +0200
+diff -Naur linux-2.6.32.57.org/arch/arm/mach-kirkwood/dreamplug-setup.c linux-2.6.32.57/arch/arm/mach-kirkwood/dreamplug-setup.c
+--- linux-2.6.32.57.org/arch/arm/mach-kirkwood/dreamplug-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.32.57/arch/arm/mach-kirkwood/dreamplug-setup.c 2012-03-02 09:22:40.107199269 +0100
@@ -0,0 +1,140 @@
+/*
+ * arch/arm/mach-kirkwood/dreamplug-setup.c
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
-diff -Naur linux-2.6.32.45.org/arch/arm/mach-kirkwood/guruplug-setup.c linux-2.6.32.45/arch/arm/mach-kirkwood/guruplug-setup.c
---- linux-2.6.32.45.org/arch/arm/mach-kirkwood/guruplug-setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.32.45/arch/arm/mach-kirkwood/guruplug-setup.c 2011-10-11 15:35:37.000000000 +0200
-@@ -0,0 +1,131 @@
+diff -Naur linux-2.6.32.57.org/arch/arm/mach-kirkwood/guruplug-setup.c linux-2.6.32.57/arch/arm/mach-kirkwood/guruplug-setup.c
+--- linux-2.6.32.57.org/arch/arm/mach-kirkwood/guruplug-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.32.57/arch/arm/mach-kirkwood/guruplug-setup.c 2012-03-02 23:36:51.627514981 +0100
+@@ -0,0 +1,133 @@
+/*
+ * arch/arm/mach-kirkwood/guruplug-setup.c
+ *
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+ {
+ .name = "u-boot",
+ .offset = 0,
-+ .size = SZ_1M
++ .size = SZ_1M,
++ .mask_flags = MTD_WRITEABLE, /* read only */
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = SZ_4M
++ .size = SZ_4M,
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL
++ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
-diff -Naur linux-2.6.32.45.org/arch/arm/mach-kirkwood/Kconfig linux-2.6.32.45/arch/arm/mach-kirkwood/Kconfig
---- linux-2.6.32.45.org/arch/arm/mach-kirkwood/Kconfig 2011-08-16 03:57:37.000000000 +0200
-+++ linux-2.6.32.45/arch/arm/mach-kirkwood/Kconfig 2011-10-15 17:06:55.816070291 +0200
+diff -Naur linux-2.6.32.57.org/arch/arm/mach-kirkwood/iconnect-setup.c linux-2.6.32.57/arch/arm/mach-kirkwood/iconnect-setup.c
+--- linux-2.6.32.57.org/arch/arm/mach-kirkwood/iconnect-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.32.57/arch/arm/mach-kirkwood/iconnect-setup.c 2012-03-03 00:15:42.757514706 +0100
+@@ -0,0 +1,211 @@
++/*
++ * arch/arm/mach-kirkwood/iconnect-setup.c
++ *
++ * Iomega iConnect Wireless Data Station Board Setup
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/ata_platform.h>
++#include <linux/mv643xx_eth.h>
++#include <linux/gpio.h>
++#include <linux/gpio_keys.h>
++#include <linux/i2c.h>
++#include <linux/input.h>
++#include <linux/leds.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <mach/kirkwood.h>
++#include "common.h"
++#include "mpp.h"
++
++static struct mtd_partition iconnect_nand_parts[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = SZ_1M,
++ .mask_flags = MTD_WRITEABLE, /* read only */
++ }, {
++ .name = "uImage",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 0x440000,
++ }, {
++ .name = "uInit",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 0x440000,
++ }, {
++ .name = "root",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL,
++ },
++};
++
++static struct mv643xx_eth_platform_data iconnect_ge00_data = {
++ .phy_addr = MV643XX_ETH_PHY_ADDR(0xB),
++};
++
++static struct gpio_led iconnect_led_pins[] = {
++ {
++ .name = "iconnect:led_level",
++ .default_trigger = "default-on",
++ .gpio = 41,
++ .active_low = 0,
++ },
++
++ {
++ .name = "iconnect:blue:power",
++ .default_trigger = "default-on",
++ .gpio = 42,
++ .active_low = 0,
++ },
++ {
++ .name = "iconnect:red:power",
++ .default_trigger = "none",
++ .gpio = 43,
++ .active_low = 0,
++ },
++ {
++ .name = "iconnect:blue:usb_1",
++ .default_trigger = "none",
++ .gpio = 44,
++ .active_low = 0,
++ },
++ {
++ .name = "iconnect:blue:usb_2",
++ .default_trigger = "none",
++ .gpio = 45,
++ .active_low = 0,
++ },
++ {
++ .name = "iconnect:blue:usb_3",
++ .default_trigger = "none",
++ .gpio = 46,
++ .active_low = 0,
++ },
++ {
++ .name = "iconnect:blue:usb_4",
++ .default_trigger = "none",
++ .gpio = 47,
++ .active_low = 0,
++ },
++ {
++ .name = "iconnect:blue:otb",
++ .default_trigger = "none",
++ .gpio = 48,
++ .active_low = 0,
++ },
++};
++
++static struct gpio_led_platform_data iconnect_led_data = {
++ .leds = iconnect_led_pins,
++ .num_leds = ARRAY_SIZE(iconnect_led_pins),
++};
++
++static struct platform_device iconnect_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = &iconnect_led_data,
++ }
++};
++
++static struct gpio_keys_button iconnect_buttons[] = {
++ {
++ .code = KEY_COPY,
++ .gpio = 35,
++ .desc = "OTB Button",
++ .active_low = 1,
++ },
++ {
++ .code = KEY_RESTART,
++ .gpio = 12,
++ .desc = "Reset",
++ .active_low = 1,
++ },
++};
++
++static struct gpio_keys_platform_data iconnect_button_data = {
++ .buttons = iconnect_buttons,
++ .nbuttons = ARRAY_SIZE(iconnect_buttons),
++};
++
++static struct platform_device iconnect_button_device = {
++ .name = "gpio-keys",
++ .id = -1,
++ .num_resources = 0,
++ .dev = {
++ .platform_data = &iconnect_button_data,
++ }
++};
++
++static unsigned int iconnect_mpp_config[] __initdata = {
++ MPP0_NF_IO2,
++ MPP1_NF_IO3,
++ MPP2_NF_IO4,
++ MPP3_NF_IO5,
++ MPP4_NF_IO6,
++ MPP5_NF_IO7,
++ MPP18_NF_IO0,
++ MPP19_NF_IO1,
++ MPP12_GPIO, /* Reset Button */
++ MPP35_GPIO, /* OTB Button */
++
++ MPP41_GPIO, /* LED Level */
++ MPP42_GPIO, /* Power LED blue */
++ MPP43_GPIO, /* Power LED red */
++ MPP44_GPIO, /* USB LED 1 */
++ MPP45_GPIO, /* USB LED 2 */
++ MPP46_GPIO, /* USB LED 3 */
++ MPP47_GPIO, /* USB LED 4 */
++ MPP48_GPIO, /* OTB LED */
++ 0
++};
++
++static struct i2c_board_info __initdata iconnect_i2c = {
++ I2C_BOARD_INFO("lm63", 0x4c),
++};
++
++static void __init iconnect_init(void)
++{
++ /*
++ * Basic setup. Needs to be called early.
++ */
++ kirkwood_init();
++ kirkwood_mpp_conf(iconnect_mpp_config);
++
++ kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
++ kirkwood_ehci_init();
++ kirkwood_ge00_init(&iconnect_ge00_data);
++
++ kirkwood_uart0_init();
++ platform_device_register(&iconnect_leds);
++ platform_device_register(&iconnect_button_device);
++
++ kirkwood_i2c_init();
++ i2c_register_board_info(0, &iconnect_i2c,1);
++}
++
++static int __init iconnect_pci_init(void)
++{
++ if (machine_is_iconnect()) {
++ kirkwood_pcie_init();
++ }
++ return 0;
++}
++subsys_initcall(iconnect_pci_init);
++
++MACHINE_START(ICONNECT, "Iomega iConnect Wireless Data Station")
++ /* Maintainer: Arne Fitzenreiter <arne_f@ipfire.org> */
++ .boot_params = 0x00000100,
++ .init_machine = iconnect_init,
++ .map_io = kirkwood_map_io,
++ .init_irq = kirkwood_init_irq,
++ .timer = &kirkwood_timer,
++MACHINE_END
+diff -Naur linux-2.6.32.57.org/arch/arm/mach-kirkwood/Kconfig linux-2.6.32.57/arch/arm/mach-kirkwood/Kconfig
+--- linux-2.6.32.57.org/arch/arm/mach-kirkwood/Kconfig 2012-02-13 20:29:11.000000000 +0100
++++ linux-2.6.32.57/arch/arm/mach-kirkwood/Kconfig 2012-03-02 09:28:49.387192309 +0100
@@ -32,6 +32,18 @@
Say 'Y' here if you want your kernel to support the
Marvell SheevaPlug Reference Board.
config MACH_TS219
bool "QNAP TS-119 and TS-219 Turbo NAS"
help
-@@ -44,6 +56,12 @@
+@@ -44,6 +56,18 @@
Say 'Y' here if you want your kernel to support the
Marvell OpenRD Base Board.
++config MACH_ICONNECT
++ bool "Iomega iConnect Wireless Data Station"
++ help
++ Say 'Y' here if you want your kernel to support the
++ Iomega iConnect Wireless Data Station.
++
+config MACH_NAS6210
+ bool "RaidSonic ICY BOX IB-NAS62x0"
+ help
endmenu
endif
-diff -Naur linux-2.6.32.45.org/arch/arm/mach-kirkwood/Makefile linux-2.6.32.45/arch/arm/mach-kirkwood/Makefile
---- linux-2.6.32.45.org/arch/arm/mach-kirkwood/Makefile 2011-08-16 03:57:37.000000000 +0200
-+++ linux-2.6.32.45/arch/arm/mach-kirkwood/Makefile 2011-10-15 17:07:16.346068829 +0200
-@@ -5,7 +5,10 @@
+diff -Naur linux-2.6.32.57.org/arch/arm/mach-kirkwood/Makefile linux-2.6.32.57/arch/arm/mach-kirkwood/Makefile
+--- linux-2.6.32.57.org/arch/arm/mach-kirkwood/Makefile 2012-02-13 20:29:11.000000000 +0100
++++ linux-2.6.32.57/arch/arm/mach-kirkwood/Makefile 2012-03-02 09:26:39.447195212 +0100
+@@ -5,7 +5,11 @@
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
+obj-$(CONFIG_MACH_DREAMPLUG) += dreamplug-setup.o
obj-$(CONFIG_MACH_TS219) += ts219-setup.o
obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o
++obj-$(CONFIG_MACH_ICONNECT) += iconnect-setup.o
+obj-$(CONFIG_MACH_NAS6210) += nas6210-setup.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
-diff -Naur linux-2.6.32.45.org/arch/arm/mach-kirkwood/nas6210-setup.c linux-2.6.32.45/arch/arm/mach-kirkwood/nas6210-setup.c
---- linux-2.6.32.45.org/arch/arm/mach-kirkwood/nas6210-setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.32.45/arch/arm/mach-kirkwood/nas6210-setup.c 2011-10-16 09:57:35.268409525 +0200
-@@ -0,0 +1,180 @@
+diff -Naur linux-2.6.32.57.org/arch/arm/mach-kirkwood/mpp.h linux-2.6.32.57/arch/arm/mach-kirkwood/mpp.h
+--- linux-2.6.32.57.org/arch/arm/mach-kirkwood/mpp.h 2012-02-13 20:29:11.000000000 +0100
++++ linux-2.6.32.57/arch/arm/mach-kirkwood/mpp.h 2012-03-02 10:26:53.987196429 +0100
+@@ -102,7 +102,9 @@
+ #define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1 )
+ #define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1 )
+
++
+ #define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1 )
++#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 1, 1, 1, 1 )
+ #define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1 )
+
+ #define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1 )
+diff -Naur linux-2.6.32.57.org/arch/arm/mach-kirkwood/nas6210-setup.c linux-2.6.32.57/arch/arm/mach-kirkwood/nas6210-setup.c
+--- linux-2.6.32.57.org/arch/arm/mach-kirkwood/nas6210-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.32.57/arch/arm/mach-kirkwood/nas6210-setup.c 2012-03-02 23:37:35.077514152 +0100
+@@ -0,0 +1,183 @@
+/*
+ * arch/arm/mach-kirkwood/nas6210-setup.c
+ *
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
++#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+ {
+ .name = "u-boot",
+ .offset = 0,
-+ .size = SZ_1M
++ .size = SZ_1M,
++ .mask_flags = MTD_WRITEABLE, /* read only */
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = (SZ_1M*6)
++ .size = (SZ_1M*6),
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL
++ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
-diff -Naur linux-2.6.32.45.org/arch/arm/tools/mach-types linux-2.6.32.45/arch/arm/tools/mach-types
---- linux-2.6.32.45.org/arch/arm/tools/mach-types 2011-08-16 03:57:37.000000000 +0200
-+++ linux-2.6.32.45/arch/arm/tools/mach-types 2011-10-15 17:05:46.486069811 +0200
-@@ -2536,3 +2536,6 @@
+diff -Naur linux-2.6.32.57.org/arch/arm/tools/mach-types linux-2.6.32.57/arch/arm/tools/mach-types
+--- linux-2.6.32.57.org/arch/arm/tools/mach-types 2012-02-13 20:29:11.000000000 +0100
++++ linux-2.6.32.57/arch/arm/tools/mach-types 2012-03-02 09:25:26.787196718 +0100
+@@ -2536,3 +2536,7 @@
mxt_td60 MACH_MXT_TD60 MXT_TD60 2550
esyx MACH_ESYX ESYX 2551
bulldog MACH_BULLDOG BULLDOG 2553
+guruplug MACH_GURUPLUG GURUPLUG 2601
+dreamplug MACH_DREAMPLUG DREAMPLUG 2659
++iconnect MACH_ICONNECT ICONNECT 2870
+nas6210 MACH_NAS6210 NAS6210 3104
--- /dev/null
+Added smsc95xx.macaddr module parameter to allow the user to
+change the MAC address on boot if there was no MAC on the EEPROM.
+
+The parameter take the MAC address in 01:23:45:67:89:ab format and
+needs to be locally assigned. The MAC get assigned to the first
+smsc95xx device with no MAC on EEPROM (which resulted in a random
+MAC before). If there is more than one device without MAC on
+EEPROM and the user needs set the MAC to a specific device, it
+can be done by attaching the netdev name (e.g. eth0) to the
+smsc95xx.macaddr parameter seperated by a ';' as e.g. in
+'01:23:45:67:89:ab;eth0'
+
+This allows e.g. u-boot to pass on PandaBoard or BeagleBoard
+the by u-boot generated static MAC address to the kernel device
+to ensure the MAC stays the same during the whole boot process.
+
+Signed-off-by: Danny Kukawka <danny.kukawka@...>
+---
+ drivers/net/usb/smsc95xx.c | 85 ++++++++++++++++++++++++++++++++++++++++++--
+ 1 files changed, 82 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
+index d45520e..3198c7d 100644
+--- a/drivers/net/usb/smsc95xx.c
++++ b/drivers/net/usb/smsc95xx.c
+@@ -52,6 +52,8 @@ struct smsc95xx_priv {
+ u32 hash_hi;
+ u32 hash_lo;
+ spinlock_t mac_cr_lock;
++ bool mac_set_from_param;
++ bool mac_is_random;
+ };
+
+ struct usb_context {
+@@ -63,6 +65,11 @@ static bool turbo_mode = true;
+ module_param(turbo_mode, bool, 0644);
+ MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
+
++static char *macaddr = ":";
++static bool set_macaddr = false;
++module_param(macaddr, charp, 0);
++MODULE_PARM_DESC(macaddr, " macaddr=macaddr;[tgt-netdevname] (Set MAC only if there is a device without MAC on EEPROM)");
++
+ static int smsc95xx_read_reg(struct usbnet *dev, u32 index, u32 *data)
+ {
+ u32 *buf = kmalloc(4, GFP_KERNEL);
+@@ -601,8 +608,71 @@ static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+ return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+ }
+
++/* set mac address from the macaddr module parameter */
++static int smsc95xx_init_mac_address_from_param(struct usbnet *dev)
++{
++ struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++ int i, parsed, ret;
++ u8 mtbl[ETH_ALEN];
++ char *input = NULL;
++ char *config_param = NULL;
++ char *netdev_name = NULL;
++
++ parsed = 0;
++ ret = 0;
++
++ input = kstrdup(macaddr, GFP_KERNEL);
++
++ if (!input)
++ return -ENOMEM;
++
++ if (strlen(input) >= 17) {
++ while ((config_param = strsep(&input, ";"))) {
++ if (parsed == 0) {
++ if (!mac_pton(config_param, mtbl)) {
++ ret = 1;
++ goto parse_err;
++ }
++ } else {
++ netdev_name = config_param;
++ }
++ parsed ++;
++ }
++
++ if (parsed && is_valid_ether_addr(mtbl)) {
++ if (netdev_name && strlen(netdev_name)) {
++ if (strcmp(netdev_name, dev->net->name) != 0) {
++ netif_dbg(dev, ifup, dev->net, "requested devname (%s) didn't match (%s)\n", netdev_name, dev->net->name);
++ ret = 1;
++ goto out;
++ }
++ }
++
++ for (i = 0; i < ETH_ALEN; i++) {
++ dev->net->dev_addr[i] = mtbl[i];
++ }
++
++ netif_dbg(dev, ifup, dev->net, "set valid MAC address from smsc95xx.macaddr\n");
++ set_macaddr = true;
++ pdata->mac_set_from_param = true;
++ pdata->mac_is_random = false;
++ goto out;
++ }
++ }
++
++parse_err:
++ netif_dbg(dev, ifup, dev->net, "failed to parse (valid) MAC from smsc95xx.macaddr\n");
++ set_macaddr = true;
++out:
++ if (input)
++ kfree(input);
++ return ret;
++}
++
+ static void smsc95xx_init_mac_address(struct usbnet *dev)
+ {
++ struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++
+ /* try reading mac address from EEPROM */
+ if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
+ dev->net->dev_addr) == 0) {
+@@ -615,16 +685,25 @@ static void smsc95xx_init_mac_address(struct usbnet *dev)
+
+ /* no eeprom, or eeprom values are invalid. generate random MAC */
+ random_ether_addr(dev->net->dev_addr);
++ pdata->mac_is_random = true;
+ netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr\n");
+ }
+
+ static int smsc95xx_set_mac_address(struct usbnet *dev)
+ {
+- u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 |
+- dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24;
+- u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8;
++ struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
++ u32 addr_lo, addr_hi;
+ int ret;
+
++ if (pdata->mac_is_random && !pdata->mac_set_from_param && !set_macaddr) {
++ netif_dbg(dev, ifup, dev->net, "random MAC address, not yet set from smsc95xx.macaddr, try to set it ...\n");
++ smsc95xx_init_mac_address_from_param(dev);
++ }
++
++ addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 |
++ dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24;
++ addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8;
++
+ ret = smsc95xx_write_reg(dev, ADDRL, addr_lo);
+ if (ret < 0) {
+ netdev_warn(dev->net, "Failed to write ADDRL: %d\n", ret);
+--
+
--- /dev/null
+diff -Naur linux-3.0.24.org/include/linux/netfilter_ipv4/ipt_ipp2p.h linux-3.0.24/include/linux/netfilter_ipv4/ipt_ipp2p.h
+--- linux-3.0.24.org/include/linux/netfilter_ipv4/ipt_ipp2p.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.0.24/include/linux/netfilter_ipv4/ipt_ipp2p.h 2012-03-20 09:29:20.616541362 +0100
+@@ -0,0 +1,31 @@
++#ifndef __IPT_IPP2P_H
++#define __IPT_IPP2P_H
++#define IPP2P_VERSION "0.8.2-ipfire"
++
++struct ipt_p2p_info {
++ int cmd;
++ int debug;
++};
++
++#endif //__IPT_IPP2P_H
++
++#define SHORT_HAND_IPP2P 1 /* --ipp2p switch*/
++//#define SHORT_HAND_DATA 4 /* --ipp2p-data switch*/
++#define SHORT_HAND_NONE 5 /* no short hand*/
++
++#define IPP2P_EDK (1 << 1)
++#define IPP2P_DATA_KAZAA (1 << 2)
++#define IPP2P_DATA_EDK (1 << 3)
++#define IPP2P_DATA_DC (1 << 4)
++#define IPP2P_DC (1 << 5)
++#define IPP2P_DATA_GNU (1 << 6)
++#define IPP2P_GNU (1 << 7)
++#define IPP2P_KAZAA (1 << 8)
++#define IPP2P_BIT (1 << 9)
++#define IPP2P_APPLE (1 << 10)
++#define IPP2P_SOUL (1 << 11)
++#define IPP2P_WINMX (1 << 12)
++#define IPP2P_ARES (1 << 13)
++#define IPP2P_MUTE (1 << 14)
++#define IPP2P_WASTE (1 << 15)
++#define IPP2P_XDCC (1 << 16)
+diff -Naur linux-3.0.24.org/net/ipv4/netfilter/ipt_ipp2p.c linux-3.0.24/net/ipv4/netfilter/ipt_ipp2p.c
+--- linux-3.0.24.org/net/ipv4/netfilter/ipt_ipp2p.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.0.24/net/ipv4/netfilter/ipt_ipp2p.c 2012-03-20 11:26:38.593101443 +0100
+@@ -0,0 +1,970 @@
++#if defined(MODVERSIONS)
++#include <linux/modversions.h>
++#endif
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/netfilter_ipv4/ip_tables.h>
++#include <linux/netfilter_ipv4/ipt_ipp2p.h>
++#include <net/tcp.h>
++#include <net/udp.h>
++
++#define get_u8(X,O) (*(__u8 *)(X + O))
++#define get_u16(X,O) (*(__u16 *)(X + O))
++#define get_u32(X,O) (*(__u32 *)(X + O))
++
++MODULE_AUTHOR("Eicke Friedrich/Klaus Degner <ipp2p@ipp2p.org>");
++MODULE_DESCRIPTION("An extension to iptables to identify P2P traffic.");
++MODULE_LICENSE("GPL");
++
++
++/*Search for UDP eDonkey/eMule/Kad commands*/
++int
++udp_search_edk (unsigned char *haystack, int packet_len)
++{
++ unsigned char *t = haystack;
++ t += 8;
++
++ switch (t[0]) {
++ case 0xe3:
++ { /*edonkey*/
++ switch (t[1])
++ {
++ /* client -> server status request */
++ case 0x96:
++ if (packet_len == 14) return ((IPP2P_EDK * 100) + 50);
++ break;
++ /* server -> client status request */
++ case 0x97: if (packet_len == 42) return ((IPP2P_EDK * 100) + 51);
++ break;
++ /* server description request */
++ /* e3 2a ff f0 .. | size == 6 */
++ case 0xa2: if ( (packet_len == 14) && ( get_u16(t,2) == __constant_htons(0xfff0) ) ) return ((IPP2P_EDK * 100) + 52);
++ break;
++ /* server description response */
++ /* e3 a3 ff f0 .. | size > 40 && size < 200 */
++ //case 0xa3: return ((IPP2P_EDK * 100) + 53);
++ // break;
++ case 0x9a: if (packet_len==26) return ((IPP2P_EDK * 100) + 54);
++ break;
++
++ case 0x92: if (packet_len==18) return ((IPP2P_EDK * 100) + 55);
++ break;
++ }
++ break;
++ }
++ case 0xe4:
++ {
++ switch (t[1])
++ {
++ /* e4 20 .. | size == 43 */
++ case 0x20: if ((packet_len == 43) && (t[2] != 0x00) && (t[34] != 0x00)) return ((IPP2P_EDK * 100) + 60);
++ break;
++ /* e4 00 .. 00 | size == 35 ? */
++ case 0x00: if ((packet_len == 35) && (t[26] == 0x00)) return ((IPP2P_EDK * 100) + 61);
++ break;
++ /* e4 10 .. 00 | size == 35 ? */
++ case 0x10: if ((packet_len == 35) && (t[26] == 0x00)) return ((IPP2P_EDK * 100) + 62);
++ break;
++ /* e4 18 .. 00 | size == 35 ? */
++ case 0x18: if ((packet_len == 35) && (t[26] == 0x00)) return ((IPP2P_EDK * 100) + 63);
++ break;
++ /* e4 52 .. | size = 44 */
++ case 0x52: if (packet_len == 44 ) return ((IPP2P_EDK * 100) + 64);
++ break;
++ /* e4 58 .. | size == 6 */
++ case 0x58: if (packet_len == 14 ) return ((IPP2P_EDK * 100) + 65);
++ break;
++ /* e4 59 .. | size == 2 */
++ case 0x59: if (packet_len == 10 )return ((IPP2P_EDK * 100) + 66);
++ break;
++ /* e4 28 .. | packet_len == 52,77,102,127... */
++ case 0x28: if (((packet_len-52) % 25) == 0) return ((IPP2P_EDK * 100) + 67);
++ break;
++ /* e4 50 xx xx | size == 4 */
++ case 0x50: if (packet_len == 12) return ((IPP2P_EDK * 100) + 68);
++ break;
++ /* e4 40 xx xx | size == 48 */
++ case 0x40: if (packet_len == 56) return ((IPP2P_EDK * 100) + 69);
++ break;
++ }
++ break;
++ }
++ } /* end of switch (t[0]) */
++ return 0;
++}/*udp_search_edk*/
++
++
++/*Search for UDP Gnutella commands*/
++int
++udp_search_gnu (unsigned char *haystack, int packet_len)
++{
++ unsigned char *t = haystack;
++ t += 8;
++
++ if (memcmp(t, "GND", 3) == 0) return ((IPP2P_GNU * 100) + 51);
++ if (memcmp(t, "GNUTELLA ", 9) == 0) return ((IPP2P_GNU * 100) + 52);
++ return 0;
++}/*udp_search_gnu*/
++
++
++/*Search for UDP KaZaA commands*/
++int
++udp_search_kazaa (unsigned char *haystack, int packet_len)
++{
++ unsigned char *t = haystack;
++
++ if (t[packet_len-1] == 0x00){
++ t += (packet_len - 6);
++ if (memcmp(t, "KaZaA", 5) == 0) return (IPP2P_KAZAA * 100 +50);
++ }
++
++ return 0;
++}/*udp_search_kazaa*/
++
++/*Search for UDP DirectConnect commands*/
++int
++udp_search_directconnect (unsigned char *haystack, int packet_len)
++{
++ unsigned char *t = haystack;
++ if ((*(t + 8) == 0x24) && (*(t + packet_len - 1) == 0x7c)) {
++ t+=8;
++ if (memcmp(t, "SR ", 3) == 0) return ((IPP2P_DC * 100) + 60);
++ if (memcmp(t, "Ping ", 5) == 0) return ((IPP2P_DC * 100) + 61);
++ }
++ return 0;
++}/*udp_search_directconnect*/
++
++
++
++/*Search for UDP BitTorrent commands*/
++int
++udp_search_bit (unsigned char *haystack, int packet_len)
++{
++ switch(packet_len)
++ {
++ case 24:
++ /* ^ 00 00 04 17 27 10 19 80 */
++ if ((ntohl(get_u32(haystack, 8)) == 0x00000417) && (ntohl(get_u32(haystack, 12)) == 0x27101980))
++ return (IPP2P_BIT * 100 + 50);
++ break;
++ case 44:
++ if (get_u32(haystack, 16) == __constant_htonl(0x00000400) && get_u32(haystack, 36) == __constant_htonl(0x00000104))
++ return (IPP2P_BIT * 100 + 51);
++ if (get_u32(haystack, 16) == __constant_htonl(0x00000400))
++ return (IPP2P_BIT * 100 + 61);
++ break;
++ case 65:
++ if (get_u32(haystack, 16) == __constant_htonl(0x00000404) && get_u32(haystack, 36) == __constant_htonl(0x00000104))
++ return (IPP2P_BIT * 100 + 52);
++ if (get_u32(haystack, 16) == __constant_htonl(0x00000404))
++ return (IPP2P_BIT * 100 + 62);
++ break;
++ case 67:
++ if (get_u32(haystack, 16) == __constant_htonl(0x00000406) && get_u32(haystack, 36) == __constant_htonl(0x00000104))
++ return (IPP2P_BIT * 100 + 53);
++ if (get_u32(haystack, 16) == __constant_htonl(0x00000406))
++ return (IPP2P_BIT * 100 + 63);
++ break;
++ case 211:
++ if (get_u32(haystack, 8) == __constant_htonl(0x00000405))
++ return (IPP2P_BIT * 100 + 54);
++ break;
++ case 29:
++ if ((get_u32(haystack, 8) == __constant_htonl(0x00000401)))
++ return (IPP2P_BIT * 100 + 55);
++ break;
++ case 52:
++ if (get_u32(haystack,8) == __constant_htonl(0x00000827) &&
++ get_u32(haystack,12) == __constant_htonl(0x37502950))
++ return (IPP2P_BIT * 100 + 80);
++ break;
++ default:
++ /* this packet does not have a constant size */
++ if (packet_len >= 40 && get_u32(haystack, 16) == __constant_htonl(0x00000402) && get_u32(haystack, 36) == __constant_htonl(0x00000104))
++ return (IPP2P_BIT * 100 + 56);
++ break;
++ }
++
++ /* some extra-bitcomet rules:
++ * "d1:" [a|r] "d2:id20:"
++ */
++ if (packet_len > 30 && get_u8(haystack, 8) == 'd' && get_u8(haystack, 9) == '1' && get_u8(haystack, 10) == ':' )
++ {
++ if (get_u8(haystack, 11) == 'a' || get_u8(haystack, 11) == 'r')
++ {
++ if (memcmp(haystack+12,"d2:id20:",8)==0)
++ return (IPP2P_BIT * 100 + 57);
++ }
++ }
++
++#if 0
++ /* bitlord rules */
++ /* packetlen must be bigger than 40 */
++ /* first 4 bytes are zero */
++ if (packet_len > 40 && get_u32(haystack, 8) == 0x00000000)
++ {
++ /* first rule: 00 00 00 00 01 00 00 xx xx xx xx 00 00 00 00*/
++ if (get_u32(haystack, 12) == 0x00000000 &&
++ get_u32(haystack, 16) == 0x00010000 &&
++ get_u32(haystack, 24) == 0x00000000 )
++ return (IPP2P_BIT * 100 + 71);
++
++ /* 00 01 00 00 0d 00 00 xx xx xx xx 00 00 00 00*/
++ if (get_u32(haystack, 12) == 0x00000001 &&
++ get_u32(haystack, 16) == 0x000d0000 &&
++ get_u32(haystack, 24) == 0x00000000 )
++ return (IPP2P_BIT * 100 + 71);
++
++
++ }
++#endif
++
++ return 0;
++}/*udp_search_bit*/
++
++
++
++/*Search for Ares commands*/
++//#define IPP2P_DEBUG_ARES
++int
++search_ares (const unsigned char *payload, const u16 plen)
++//int search_ares (unsigned char *haystack, int packet_len, int head_len)
++{
++// const unsigned char *t = haystack + head_len;
++
++ /* all ares packets start with */
++ if (payload[1] == 0 && (plen - payload[0]) == 3)
++ {
++ switch (payload[2])
++ {
++ case 0x5a:
++ /* ares connect */
++ if ( plen == 6 && payload[5] == 0x05 ) return ((IPP2P_ARES * 100) + 1);
++ break;
++ case 0x09:
++ /* ares search, min 3 chars --> 14 bytes
++ * lets define a search can be up to 30 chars --> max 34 bytes
++ */
++ if ( plen >= 14 && plen <= 34 ) return ((IPP2P_ARES * 100) + 1);
++ break;
++#ifdef IPP2P_DEBUG_ARES
++ default:
++ printk(KERN_DEBUG "Unknown Ares command %x recognized, len: %u \n", (unsigned int) payload[2],plen);
++#endif /* IPP2P_DEBUG_ARES */
++ }
++ }
++
++#if 0
++ /* found connect packet: 03 00 5a 04 03 05 */
++ /* new version ares 1.8: 03 00 5a xx xx 05 */
++ if ((plen) == 6){ /* possible connect command*/
++ if ((payload[0] == 0x03) && (payload[1] == 0x00) && (payload[2] == 0x5a) && (payload[5] == 0x05))
++ return ((IPP2P_ARES * 100) + 1);
++ }
++ if ((plen) == 60){ /* possible download command*/
++ if ((payload[59] == 0x0a) && (payload[58] == 0x0a)){
++ if (memcmp(t, "PUSH SHA1:", 10) == 0) /* found download command */
++ return ((IPP2P_ARES * 100) + 2);
++ }
++ }
++#endif
++
++ return 0;
++} /*search_ares*/
++
++/*Search for SoulSeek commands*/
++int
++search_soul (const unsigned char *payload, const u16 plen)
++{
++//#define IPP2P_DEBUG_SOUL
++ /* match: xx xx xx xx | xx = sizeof(payload) - 4 */
++ if (get_u32(payload, 0) == (plen - 4)){
++ const __u32 m=get_u32(payload, 4);
++ /* match 00 yy yy 00, yy can be everything */
++ if ( get_u8(payload, 4) == 0x00 && get_u8(payload, 7) == 0x00 )
++ {
++#ifdef IPP2P_DEBUG_SOUL
++ printk(KERN_DEBUG "0: Soulseek command 0x%x recognized\n",get_u32(payload, 4));
++#endif /* IPP2P_DEBUG_SOUL */
++ return ((IPP2P_SOUL * 100) + 1);
++ }
++
++ /* next match: 01 yy 00 00 | yy can be everything */
++ if ( get_u8(payload, 4) == 0x01 && get_u16(payload, 6) == 0x0000 )
++ {
++#ifdef IPP2P_DEBUG_SOUL
++ printk(KERN_DEBUG "1: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
++#endif /* IPP2P_DEBUG_SOUL */
++ return ((IPP2P_SOUL * 100) + 2);
++ }
++
++ /* other soulseek commandos are: 1-5,7,9,13-18,22,23,26,28,35-37,40-46,50,51,60,62-69,91,92,1001 */
++ /* try to do this in an intelligent way */
++ /* get all small commandos */
++ switch(m)
++ {
++ case 7:
++ case 9:
++ case 22:
++ case 23:
++ case 26:
++ case 28:
++ case 50:
++ case 51:
++ case 60:
++ case 91:
++ case 92:
++ case 1001:
++#ifdef IPP2P_DEBUG_SOUL
++ printk(KERN_DEBUG "2: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
++#endif /* IPP2P_DEBUG_SOUL */
++ return ((IPP2P_SOUL * 100) + 3);
++ }
++
++ if (m > 0 && m < 6 )
++ {
++#ifdef IPP2P_DEBUG_SOUL
++ printk(KERN_DEBUG "3: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
++#endif /* IPP2P_DEBUG_SOUL */
++ return ((IPP2P_SOUL * 100) + 4);
++ }
++ if (m > 12 && m < 19 )
++ {
++#ifdef IPP2P_DEBUG_SOUL
++ printk(KERN_DEBUG "4: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
++#endif /* IPP2P_DEBUG_SOUL */
++ return ((IPP2P_SOUL * 100) + 5);
++ }
++
++ if (m > 34 && m < 38 )
++ {
++#ifdef IPP2P_DEBUG_SOUL
++ printk(KERN_DEBUG "5: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
++#endif /* IPP2P_DEBUG_SOUL */
++ return ((IPP2P_SOUL * 100) + 6);
++ }
++
++ if (m > 39 && m < 47 )
++ {
++#ifdef IPP2P_DEBUG_SOUL
++ printk(KERN_DEBUG "6: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
++#endif /* IPP2P_DEBUG_SOUL */
++ return ((IPP2P_SOUL * 100) + 7);
++ }
++
++ if (m > 61 && m < 70 )
++ {
++#ifdef IPP2P_DEBUG_SOUL
++ printk(KERN_DEBUG "7: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
++#endif /* IPP2P_DEBUG_SOUL */
++ return ((IPP2P_SOUL * 100) + 8);
++ }
++
++#ifdef IPP2P_DEBUG_SOUL
++ printk(KERN_DEBUG "unknown SOULSEEK command: 0x%x, first 16 bit: 0x%x, first 8 bit: 0x%x ,soulseek ???\n",get_u32(payload, 4),get_u16(payload, 4) >> 16,get_u8(payload, 4) >> 24);
++#endif /* IPP2P_DEBUG_SOUL */
++ }
++
++ /* match 14 00 00 00 01 yy 00 00 00 STRING(YY) 01 00 00 00 00 46|50 00 00 00 00 */
++ /* without size at the beginning !!! */
++ if ( get_u32(payload, 0) == 0x14 && get_u8(payload, 4) == 0x01 )
++ {
++ __u32 y=get_u32(payload, 5);
++ /* we need 19 chars + string */
++ if ( (y + 19) <= (plen) )
++ {
++ const unsigned char *w=payload+9+y;
++ if (get_u32(w, 0) == 0x01 && ( get_u16(w, 4) == 0x4600 || get_u16(w, 4) == 0x5000) && get_u32(w, 6) == 0x00);
++#ifdef IPP2P_DEBUG_SOUL
++ printk(KERN_DEBUG "Soulssek special client command recognized\n");
++#endif /* IPP2P_DEBUG_SOUL */
++ return ((IPP2P_SOUL * 100) + 9);
++ }
++ }
++ return 0;
++}
++
++
++/*Search for WinMX commands*/
++int
++search_winmx (const unsigned char *payload, const u16 plen)
++{
++//#define IPP2P_DEBUG_WINMX
++ if (((plen) == 4) && (memcmp(payload, "SEND", 4) == 0)) return ((IPP2P_WINMX * 100) + 1);
++ if (((plen) == 3) && (memcmp(payload, "GET", 3) == 0)) return ((IPP2P_WINMX * 100) + 2);
++ //if (packet_len < (head_len + 10)) return 0;
++ if (plen < 10) return 0;
++
++ if ((memcmp(payload, "SEND", 4) == 0) || (memcmp(payload, "GET", 3) == 0)){
++ u16 c=4;
++ const u16 end=plen-2;
++ u8 count=0;
++ while (c < end)
++ {
++ if (payload[c]== 0x20 && payload[c+1] == 0x22)
++ {
++ c++;
++ count++;
++ if (count>=2) return ((IPP2P_WINMX * 100) + 3);
++ }
++ c++;
++ }
++ }
++
++ if ( plen == 149 && payload[0] == '8' )
++ {
++#ifdef IPP2P_DEBUG_WINMX
++ printk(KERN_INFO "maybe WinMX\n");
++#endif
++ if (get_u32(payload,17) == 0 && get_u32(payload,21) == 0 && get_u32(payload,25) == 0 &&
++// get_u32(payload,33) == __constant_htonl(0x71182b1a) && get_u32(payload,37) == __constant_htonl(0x05050000) &&
++// get_u32(payload,133) == __constant_htonl(0x31097edf) && get_u32(payload,145) == __constant_htonl(0xdcb8f792))
++ get_u16(payload,39) == 0 && get_u16(payload,135) == __constant_htons(0x7edf) && get_u16(payload,147) == __constant_htons(0xf792))
++
++ {
++#ifdef IPP2P_DEBUG_WINMX
++ printk(KERN_INFO "got WinMX\n");
++#endif
++ return ((IPP2P_WINMX * 100) + 4);
++ }
++ }
++ return 0;
++} /*search_winmx*/
++
++
++/*Search for appleJuice commands*/
++int
++search_apple (const unsigned char *payload, const u16 plen)
++{
++ if ( (plen > 7) && (payload[6] == 0x0d) && (payload[7] == 0x0a) && (memcmp(payload, "ajprot", 6) == 0)) return (IPP2P_APPLE * 100);
++
++ return 0;
++}
++
++
++/*Search for BitTorrent commands*/
++int
++search_bittorrent (const unsigned char *payload, const u16 plen)
++{
++ if (plen > 20)
++ {
++ /* test for match 0x13+"BitTorrent protocol" */
++ if (payload[0] == 0x13)
++ {
++ if (memcmp(payload+1, "BitTorrent protocol", 19) == 0) return (IPP2P_BIT * 100);
++ }
++
++ /* get tracker commandos, all starts with GET /
++ * then it can follow: scrape| announce
++ * and then ?hash_info=
++ */
++ if (memcmp(payload,"GET /",5) == 0)
++ {
++ /* message scrape */
++ if ( memcmp(payload+5,"scrape?info_hash=",17)==0 ) return (IPP2P_BIT * 100 + 1);
++ /* message announce */
++ if ( memcmp(payload+5,"announce?info_hash=",19)==0 ) return (IPP2P_BIT * 100 + 2);
++ }
++ }
++ else
++ {
++ /* bitcomet encryptes the first packet, so we have to detect another
++ * one later in the flow */
++ /* first try failed, too many missdetections */
++ //if ( size == 5 && get_u32(t,0) == __constant_htonl(1) && t[4] < 3) return (IPP2P_BIT * 100 + 3);
++
++ /* second try: block request packets */
++ if ( plen == 17 && get_u32(payload,0) == __constant_htonl(0x0d) && payload[4] == 0x06 && get_u32(payload,13) == __constant_htonl(0x4000) ) return (IPP2P_BIT * 100 + 3);
++ }
++
++ return 0;
++}
++
++
++
++/*check for Kazaa get command*/
++int
++search_kazaa (const unsigned char *payload, const u16 plen)
++
++{
++ if ((payload[plen-2] == 0x0d) && (payload[plen-1] == 0x0a) && memcmp(payload, "GET /.hash=", 11) == 0)
++ return (IPP2P_DATA_KAZAA * 100);
++
++ return 0;
++}
++
++
++/*check for gnutella get command*/
++int
++search_gnu (const unsigned char *payload, const u16 plen)
++{
++ if ((payload[plen-2] == 0x0d) && (payload[plen-1] == 0x0a))
++ {
++ if (memcmp(payload, "GET /get/", 9) == 0) return ((IPP2P_DATA_GNU * 100) + 1);
++ if (memcmp(payload, "GET /uri-res/", 13) == 0) return ((IPP2P_DATA_GNU * 100) + 2);
++ }
++ return 0;
++}
++
++
++/*check for gnutella get commands and other typical data*/
++int
++search_all_gnu (const unsigned char *payload, const u16 plen)
++{
++
++ if ((payload[plen-2] == 0x0d) && (payload[plen-1] == 0x0a))
++ {
++
++ if (memcmp(payload, "GNUTELLA CONNECT/", 17) == 0) return ((IPP2P_GNU * 100) + 1);
++ if (memcmp(payload, "GNUTELLA/", 9) == 0) return ((IPP2P_GNU * 100) + 2);
++
++
++ if ((memcmp(payload, "GET /get/", 9) == 0) || (memcmp(payload, "GET /uri-res/", 13) == 0))
++ {
++ u16 c=8;
++ const u16 end=plen-22;
++ while (c < end) {
++ if ( payload[c] == 0x0a && payload[c+1] == 0x0d && ((memcmp(&payload[c+2], "X-Gnutella-", 11) == 0) || (memcmp(&payload[c+2], "X-Queue:", 8) == 0)))
++ return ((IPP2P_GNU * 100) + 3);
++ c++;
++ }
++ }
++ }
++ return 0;
++}
++
++
++/*check for KaZaA download commands and other typical data*/
++int
++search_all_kazaa (const unsigned char *payload, const u16 plen)
++{
++ if ((payload[plen-2] == 0x0d) && (payload[plen-1] == 0x0a))
++ {
++
++ if (memcmp(payload, "GIVE ", 5) == 0) return ((IPP2P_KAZAA * 100) + 1);
++
++ if (memcmp(payload, "GET /", 5) == 0) {
++ u16 c = 8;
++ const u16 end=plen-22;
++ while (c < end) {
++ if ( payload[c] == 0x0a && payload[c+1] == 0x0d && ((memcmp(&payload[c+2], "X-Kazaa-Username: ", 18) == 0) || (memcmp(&payload[c+2], "User-Agent: PeerEnabler/", 24) == 0)))
++ return ((IPP2P_KAZAA * 100) + 2);
++ c++;
++ }
++ }
++ }
++ return 0;
++}
++
++/*fast check for edonkey file segment transfer command*/
++int
++search_edk (const unsigned char *payload, const u16 plen)
++{
++ if (payload[0] != 0xe3)
++ return 0;
++ else {
++ if (payload[5] == 0x47)
++ return (IPP2P_DATA_EDK * 100);
++ else
++ return 0;
++ }
++}
++
++
++
++/*intensive but slower search for some edonkey packets including size-check*/
++int
++search_all_edk (const unsigned char *payload, const u16 plen)
++{
++ if (payload[0] != 0xe3)
++ return 0;
++ else {
++ //t += head_len;
++ const u16 cmd = get_u16(payload, 1);
++ if (cmd == (plen - 5)) {
++ switch (payload[5]) {
++ case 0x01: return ((IPP2P_EDK * 100) + 1); /*Client: hello or Server:hello*/
++ case 0x4c: return ((IPP2P_EDK * 100) + 9); /*Client: Hello-Answer*/
++ }
++ }
++ return 0;
++ }
++}
++
++
++/*fast check for Direct Connect send command*/
++int
++search_dc (const unsigned char *payload, const u16 plen)
++{
++
++ if (payload[0] != 0x24 )
++ return 0;
++ else {
++ if (memcmp(&payload[1], "Send|", 5) == 0)
++ return (IPP2P_DATA_DC * 100);
++ else
++ return 0;
++ }
++
++}
++
++
++/*intensive but slower check for all direct connect packets*/
++int
++search_all_dc (const unsigned char *payload, const u16 plen)
++{
++// unsigned char *t = haystack;
++
++ if (payload[0] == 0x24 && payload[plen-1] == 0x7c)
++ {
++ const unsigned char *t=&payload[1];
++ /* Client-Hub-Protocol */
++ if (memcmp(t, "Lock ", 5) == 0) return ((IPP2P_DC * 100) + 1);
++ /* Client-Client-Protocol, some are already recognized by client-hub (like lock) */
++ if (memcmp(t, "MyNick ", 7) == 0) return ((IPP2P_DC * 100) + 38);
++ }
++ return 0;
++}
++
++/*check for mute*/
++int
++search_mute (const unsigned char *payload, const u16 plen)
++{
++ if ( plen == 209 || plen == 345 || plen == 473 || plen == 609 || plen == 1121 )
++ {
++ //printk(KERN_DEBUG "size hit: %u",size);
++ if (memcmp(payload,"PublicKey: ",11) == 0 )
++ {
++ return ((IPP2P_MUTE * 100) + 0);
++
++/* if (memcmp(t+size-14,"\x0aEndPublicKey\x0a",14) == 0)
++ {
++ printk(KERN_DEBUG "end pubic key hit: %u",size);
++
++ }*/
++ }
++ }
++ return 0;
++}
++
++
++/* check for xdcc */
++int
++search_xdcc (const unsigned char *payload, const u16 plen)
++{
++ /* search in small packets only */
++ if (plen > 20 && plen < 200 && payload[plen-1] == 0x0a && payload[plen-2] == 0x0d && memcmp(payload,"PRIVMSG ",8) == 0)
++ {
++
++ u16 x=10;
++ const u16 end=plen - 13;
++
++ /* is seems to be a irc private massage, chedck for xdcc command */
++ while (x < end)
++ {
++ if (payload[x] == ':')
++ {
++ if ( memcmp(&payload[x+1],"xdcc send #",11) == 0 )
++ return ((IPP2P_XDCC * 100) + 0);
++ }
++ x++;
++ }
++ }
++ return 0;
++}
++
++/* search for waste */
++int search_waste(const unsigned char *payload, const u16 plen)
++{
++ if ( plen >= 8 && memcmp(payload,"GET.sha1:",9) == 0)
++ return ((IPP2P_WASTE * 100) + 0);
++
++ return 0;
++}
++
++
++static struct {
++ int command;
++ __u8 short_hand; /*for fucntions included in short hands*/
++ int packet_len;
++ int (*function_name) (const unsigned char *, const u16);
++} matchlist[] = {
++ {IPP2P_EDK,SHORT_HAND_IPP2P,20, &search_all_edk},
++// {IPP2P_DATA_KAZAA,SHORT_HAND_DATA,200, &search_kazaa},
++// {IPP2P_DATA_EDK,SHORT_HAND_DATA,60, &search_edk},
++// {IPP2P_DATA_DC,SHORT_HAND_DATA,26, &search_dc},
++ {IPP2P_DC,SHORT_HAND_IPP2P,5, search_all_dc},
++// {IPP2P_DATA_GNU,SHORT_HAND_DATA,40, &search_gnu},
++ {IPP2P_GNU,SHORT_HAND_IPP2P,5, &search_all_gnu},
++ {IPP2P_KAZAA,SHORT_HAND_IPP2P,5, &search_all_kazaa},
++ {IPP2P_BIT,SHORT_HAND_IPP2P,20, &search_bittorrent},
++ {IPP2P_APPLE,SHORT_HAND_IPP2P,5, &search_apple},
++ {IPP2P_SOUL,SHORT_HAND_IPP2P,5, &search_soul},
++ {IPP2P_WINMX,SHORT_HAND_IPP2P,2, &search_winmx},
++ {IPP2P_ARES,SHORT_HAND_IPP2P,5, &search_ares},
++ {IPP2P_MUTE,SHORT_HAND_NONE,200, &search_mute},
++ {IPP2P_WASTE,SHORT_HAND_NONE,5, &search_waste},
++ {IPP2P_XDCC,SHORT_HAND_NONE,5, &search_xdcc},
++ {0,0,0,NULL}
++};
++
++
++static struct {
++ int command;
++ __u8 short_hand; /*for fucntions included in short hands*/
++ int packet_len;
++ int (*function_name) (unsigned char *, int);
++} udp_list[] = {
++ { IPP2P_KAZAA, SHORT_HAND_IPP2P, 14, &udp_search_kazaa},
++ { IPP2P_BIT, SHORT_HAND_IPP2P, 23, &udp_search_bit},
++ { IPP2P_GNU, SHORT_HAND_IPP2P, 11, &udp_search_gnu},
++ { IPP2P_EDK, SHORT_HAND_IPP2P, 9, &udp_search_edk},
++ { IPP2P_DC, SHORT_HAND_IPP2P, 12, &udp_search_directconnect},
++ { 0, 0, 0, NULL }
++};
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++static int
++match(const struct sk_buff *skb,
++ const struct net_device *in,
++ const struct net_device *out,
++ const void *matchinfo,
++ int offset,
++ const void *hdr,
++ u_int16_t datalen,
++ int *hotdrop)
++#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16)
++static int
++match(const struct sk_buff *skb,
++ const struct net_device *in,
++ const struct net_device *out,
++ const void *matchinfo,
++ int offset,
++ int *hotdrop)
++#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
++static int
++match(const struct sk_buff *skb,
++ const struct net_device *in,
++ const struct net_device *out,
++ const void *matchinfo,
++ int offset,
++ unsigned int protoff,
++ int *hotdrop)
++#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
++static int
++match(const struct sk_buff *skb,
++ const struct net_device *in,
++ const struct net_device *out,
++ const struct xt_match *match,
++ const void *matchinfo,
++ int offset,
++ unsigned int protoff,
++ int *hotdrop)
++#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++static bool
++match(const struct sk_buff *skb,
++ const struct net_device *in,
++ const struct net_device *out,
++ const struct xt_match *match,
++ const void *matchinfo,
++ int offset,
++ unsigned int protoff,
++ bool *hotdrop)
++#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35)
++static bool
++match(const struct sk_buff *skb,
++ const struct xt_match_param *par)
++#else /* LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35) */
++static int
++match(const struct sk_buff *skb,
++ struct xt_action_param *par)
++#endif
++{
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++ const struct ipt_p2p_info *info = matchinfo;
++#else
++ const struct ipt_p2p_info *info = par->matchinfo;
++ const int offset = par->fragoff;
++#endif
++ unsigned char *haystack;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22)
++ struct iphdr *ip = ip_hdr(skb);
++#else
++ struct iphdr *ip = skb->nh.iph;
++#endif
++ int p2p_result = 0, i = 0;
++// int head_len;
++ int hlen = ntohs(ip->tot_len)-(ip->ihl*4); /*hlen = packet-data length*/
++
++ /*must not be a fragment*/
++ if (offset) {
++ if (info->debug) printk("IPP2P.match: offset found %i \n",offset);
++ return 0;
++ }
++
++ /*make sure that skb is linear*/
++ if(skb_is_nonlinear(skb)){
++ if (info->debug) printk("IPP2P.match: nonlinear skb found\n");
++ return 0;
++ }
++
++
++ haystack=(char *)ip+(ip->ihl*4); /*haystack = packet data*/
++
++ switch (ip->protocol){
++ case IPPROTO_TCP: /*what to do with a TCP packet*/
++ {
++ struct tcphdr *tcph = (void *) ip + ip->ihl * 4;
++
++ if (tcph->fin) return 0; /*if FIN bit is set bail out*/
++ if (tcph->syn) return 0; /*if SYN bit is set bail out*/
++ if (tcph->rst) return 0; /*if RST bit is set bail out*/
++
++ haystack += tcph->doff * 4; /*get TCP-Header-Size*/
++ hlen -= tcph->doff * 4;
++ while (matchlist[i].command) {
++ if ((((info->cmd & matchlist[i].command) == matchlist[i].command) ||
++ ((info->cmd & matchlist[i].short_hand) == matchlist[i].short_hand)) &&
++ (hlen > matchlist[i].packet_len)) {
++ p2p_result = matchlist[i].function_name(haystack, hlen);
++ if (p2p_result)
++ {
++ if (info->debug) printk("IPP2P.debug:TCP-match: %i from: %pl4:%i to: %pl4:%i Length: %i\n",
++ p2p_result, &ip->saddr,ntohs(tcph->source), &ip->daddr,ntohs(tcph->dest),hlen);
++ return p2p_result;
++ }
++ }
++ i++;
++ }
++ return p2p_result;
++ }
++
++ case IPPROTO_UDP: /*what to do with an UDP packet*/
++ {
++ struct udphdr *udph = (void *) ip + ip->ihl * 4;
++
++ while (udp_list[i].command){
++ if ((((info->cmd & udp_list[i].command) == udp_list[i].command) ||
++ ((info->cmd & udp_list[i].short_hand) == udp_list[i].short_hand)) &&
++ (hlen > udp_list[i].packet_len)) {
++ p2p_result = udp_list[i].function_name(haystack, hlen);
++ if (p2p_result){
++ if (info->debug) printk("IPP2P.debug:UDP-match: %i from: %pl4:%i to: %pl4:%i Length: %i\n",
++ p2p_result, &ip->saddr,ntohs(udph->source), &ip->daddr,ntohs(udph->dest),hlen);
++ return p2p_result;
++ }
++ }
++ i++;
++ }
++ return p2p_result;
++ }
++
++ default: return 0;
++ }
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16)
++static int
++checkentry(const char *tablename,
++ const struct ipt_ip *ip,
++ void *matchinfo,
++ unsigned int matchsize,
++ unsigned int hook_mask)
++#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
++static int
++checkentry(const char *tablename,
++ const void *inf,
++ void *matchinfo,
++ unsigned int matchsize,
++ unsigned int hook_mask)
++#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
++static int
++checkentry(const char *tablename,
++ const void *inf,
++ const struct xt_match *match,
++ void *matchinfo,
++ unsigned int matchsize,
++ unsigned int hook_mask)
++#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
++static int
++checkentry(const char *tablename,
++ const void *inf,
++ const struct xt_match *match,
++ void *matchinfo,
++ unsigned int hook_mask)
++#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++static bool
++checkentry(const char *tablename,
++ const void *inf,
++ const struct xt_match *match,
++ void *matchinfo,
++ unsigned int hook_mask)
++#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35)
++static bool
++checkentry(const struct xt_mtchk_param *par)
++#else /* LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35) */
++static int
++checkentry(const struct xt_mtchk_param *par)
++#endif
++{
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35)
++ return 1;
++#else
++ return 0;
++#endif
++}
++
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
++static struct xt_match ipp2p_match = {
++#else
++static struct ipt_match ipp2p_match = {
++#endif
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++ { NULL, NULL },
++ "ipp2p",
++ &ipp2p_match,
++ &ipp2p_checkentry,
++ NULL,
++ THIS_MODULE
++#endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ .name = "ipp2p",
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
++ .family = AF_INET,
++#endif
++ .match = &match,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,17)
++ .matchsize = sizeof(struct ipt_p2p_info),
++#endif
++ .checkentry = &checkentry,
++ .me = THIS_MODULE,
++#endif
++};
++
++
++static int __init init(void)
++{
++ printk(KERN_INFO "IPP2P v%s loading\n", IPP2P_VERSION);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
++ return xt_register_match(&ipp2p_match);
++#else
++ return ipt_register_match(&ipp2p_match);
++#endif
++}
++
++static void __exit fini(void)
++{
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
++ xt_unregister_match(&ipp2p_match);
++#else
++ ipt_unregister_match(&ipp2p_match);
++#endif
++ printk(KERN_INFO "IPP2P v%s unloaded\n", IPP2P_VERSION);
++}
++
++module_init(init);
++module_exit(fini);
++
++
+diff -Naur linux-3.0.24.org/net/ipv4/netfilter/Kconfig linux-3.0.24/net/ipv4/netfilter/Kconfig
+--- linux-3.0.24.org/net/ipv4/netfilter/Kconfig 2012-03-12 18:58:19.000000000 +0100
++++ linux-3.0.24/net/ipv4/netfilter/Kconfig 2012-03-20 09:05:15.827477622 +0100
+@@ -379,5 +379,15 @@
+
+ endif # IP_NF_ARPTABLES
+
++config IP_NF_MATCH_IPP2P
++ tristate 'IPP2P match support'
++ depends on IP_NF_IPTABLES
++ help
++ This option makes possible to match some P2P packets
++ therefore helps controlling such traffic.
++
++ If you want to compile it as a module, say M here and read
++ <file:Documentation/modules.txt>. If unsure, say `N'.
++
+ endmenu
+
+diff -Naur linux-3.0.24.org/net/ipv4/netfilter/Makefile linux-3.0.24/net/ipv4/netfilter/Makefile
+--- linux-3.0.24.org/net/ipv4/netfilter/Makefile 2012-03-12 18:58:19.000000000 +0100
++++ linux-3.0.24/net/ipv4/netfilter/Makefile 2012-03-20 09:13:38.960288878 +0100
+@@ -50,6 +50,7 @@
+ # matches
+ obj-$(CONFIG_IP_NF_MATCH_AH) += ipt_ah.o
+ obj-$(CONFIG_IP_NF_MATCH_ECN) += ipt_ecn.o
++obj-$(CONFIG_IP_NF_MATCH_IPP2P) += ipt_ipp2p.o
+
+ # targets
+ obj-$(CONFIG_IP_NF_TARGET_CLUSTERIP) += ipt_CLUSTERIP.o
--- /dev/null
+diff -uNr linux-3.1/drivers/net/imq.c linux-3.1-imq/drivers/net/imq.c
+--- linux-3.1/drivers/net/imq.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-3.1-imq/drivers/net/imq.c 2011-11-04 12:16:10.454992642 +0200
+@@ -0,0 +1,850 @@
++/*
++ * Pseudo-driver for the intermediate queue device.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ *
++ * Authors: Patrick McHardy, <kaber@trash.net>
++ *
++ * The first version was written by Martin Devera, <devik@cdi.cz>
++ *
++ * Credits: Jan Rafaj <imq2t@cedric.vabo.cz>
++ * - Update patch to 2.4.21
++ * Sebastian Strollo <sstrollo@nortelnetworks.com>
++ * - Fix "Dead-loop on netdevice imq"-issue
++ * Marcel Sebek <sebek64@post.cz>
++ * - Update to 2.6.2-rc1
++ *
++ * After some time of inactivity there is a group taking care
++ * of IMQ again: http://www.linuximq.net
++ *
++ *
++ * 2004/06/30 - New version of IMQ patch to kernels <=2.6.7
++ * including the following changes:
++ *
++ * - Correction of ipv6 support "+"s issue (Hasso Tepper)
++ * - Correction of imq_init_devs() issue that resulted in
++ * kernel OOPS unloading IMQ as module (Norbert Buchmuller)
++ * - Addition of functionality to choose number of IMQ devices
++ * during kernel config (Andre Correa)
++ * - Addition of functionality to choose how IMQ hooks on
++ * PRE and POSTROUTING (after or before NAT) (Andre Correa)
++ * - Cosmetic corrections (Norbert Buchmuller) (Andre Correa)
++ *
++ *
++ * 2005/12/16 - IMQ versions between 2.6.7 and 2.6.13 were
++ * released with almost no problems. 2.6.14-x was released
++ * with some important changes: nfcache was removed; After
++ * some weeks of trouble we figured out that some IMQ fields
++ * in skb were missing in skbuff.c - skb_clone and copy_skb_header.
++ * These functions are correctly patched by this new patch version.
++ *
++ * Thanks for all who helped to figure out all the problems with
++ * 2.6.14.x: Patrick McHardy, Rune Kock, VeNoMouS, Max CtRiX,
++ * Kevin Shanahan, Richard Lucassen, Valery Dachev (hopefully
++ * I didn't forget anybody). I apologize again for my lack of time.
++ *
++ *
++ * 2008/06/17 - 2.6.25 - Changed imq.c to use qdisc_run() instead
++ * of qdisc_restart() and moved qdisc_run() to tasklet to avoid
++ * recursive locking. New initialization routines to fix 'rmmod' not
++ * working anymore. Used code from ifb.c. (Jussi Kivilinna)
++ *
++ * 2008/08/06 - 2.6.26 - (JK)
++ * - Replaced tasklet with 'netif_schedule()'.
++ * - Cleaned up and added comments for imq_nf_queue().
++ *
++ * 2009/04/12
++ * - Add skb_save_cb/skb_restore_cb helper functions for backuping
++ * control buffer. This is needed because qdisc-layer on kernels
++ * 2.6.27 and newer overwrite control buffer. (Jussi Kivilinna)
++ * - Add better locking for IMQ device. Hopefully this will solve
++ * SMP issues. (Jussi Kivilinna)
++ * - Port to 2.6.27
++ * - Port to 2.6.28
++ * - Port to 2.6.29 + fix rmmod not working
++ *
++ * 2009/04/20 - (Jussi Kivilinna)
++ * - Use netdevice feature flags to avoid extra packet handling
++ * by core networking layer and possibly increase performance.
++ *
++ * 2009/09/26 - (Jussi Kivilinna)
++ * - Add imq_nf_reinject_lockless to fix deadlock with
++ * imq_nf_queue/imq_nf_reinject.
++ *
++ * 2009/12/08 - (Jussi Kivilinna)
++ * - Port to 2.6.32
++ * - Add check for skb->nf_queue_entry==NULL in imq_dev_xmit()
++ * - Also add better error checking for skb->nf_queue_entry usage
++ *
++ * 2010/02/25 - (Jussi Kivilinna)
++ * - Port to 2.6.33
++ *
++ * 2010/08/15 - (Jussi Kivilinna)
++ * - Port to 2.6.35
++ * - Simplify hook registration by using nf_register_hooks.
++ * - nf_reinject doesn't need spinlock around it, therefore remove
++ * imq_nf_reinject function. Other nf_reinject users protect
++ * their own data with spinlock. With IMQ however all data is
++ * needed is stored per skbuff, so no locking is needed.
++ * - Changed IMQ to use 'separate' NF_IMQ_QUEUE instead of
++ * NF_QUEUE, this allows working coexistance of IMQ and other
++ * NF_QUEUE users.
++ * - Make IMQ multi-queue. Number of IMQ device queues can be
++ * increased with 'numqueues' module parameters. Default number
++ * of queues is 1, in other words by default IMQ works as
++ * single-queue device. Multi-queue selection is based on
++ * IFB multi-queue patch by Changli Gao <xiaosuo@gmail.com>.
++ *
++ * 2011/03/18 - (Jussi Kivilinna)
++ * - Port to 2.6.38
++ *
++ * 2011/07/12 - (syoder89@gmail.com)
++ * - Crash fix that happens when the receiving interface has more
++ * than one queue (add missing skb_set_queue_mapping in
++ * imq_select_queue).
++ *
++ * 2011/07/26 - (Jussi Kivilinna)
++ * - Add queue mapping checks for packets exiting IMQ.
++ * - Port to 3.0
++ *
++ * 2011/08/16 - (Jussi Kivilinna)
++ * - Clear IFF_TX_SKB_SHARING flag that was added for linux 3.0.2
++ *
++ * 2011/11/03 - Germano Michel <germanomichel@gmail.com>
++ * - Fix IMQ for net namespaces
++ *
++ * 2011/11/04 - Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
++ * - Port to 3.1
++ * - Clean-up, move 'get imq device pointer by imqX name' to
++ * separate function from imq_nf_queue().
++ *
++ * Also, many thanks to pablo Sebastian Greco for making the initial
++ * patch and to those who helped the testing.
++ *
++ * More info at: http://www.linuximq.net/ (Andre Correa)
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/moduleparam.h>
++#include <linux/list.h>
++#include <linux/skbuff.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/rtnetlink.h>
++#include <linux/if_arp.h>
++#include <linux/netfilter.h>
++#include <linux/netfilter_ipv4.h>
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++ #include <linux/netfilter_ipv6.h>
++#endif
++#include <linux/imq.h>
++#include <net/pkt_sched.h>
++#include <net/netfilter/nf_queue.h>
++#include <net/sock.h>
++#include <linux/ip.h>
++#include <linux/ipv6.h>
++#include <linux/if_vlan.h>
++#include <linux/if_pppox.h>
++#include <net/ip.h>
++#include <net/ipv6.h>
++
++static int imq_nf_queue(struct nf_queue_entry *entry, unsigned queue_num);
++
++static nf_hookfn imq_nf_hook;
++
++static struct nf_hook_ops imq_ops[] = {
++ {
++ /* imq_ingress_ipv4 */
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET,
++ .hooknum = NF_INET_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ .priority = NF_IP_PRI_MANGLE + 1,
++#else
++ .priority = NF_IP_PRI_NAT_DST + 1,
++#endif
++ },
++ {
++ /* imq_egress_ipv4 */
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET,
++ .hooknum = NF_INET_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++ .priority = NF_IP_PRI_LAST,
++#else
++ .priority = NF_IP_PRI_NAT_SRC - 1,
++#endif
++ },
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++ {
++ /* imq_ingress_ipv6 */
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET6,
++ .hooknum = NF_INET_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ .priority = NF_IP6_PRI_MANGLE + 1,
++#else
++ .priority = NF_IP6_PRI_NAT_DST + 1,
++#endif
++ },
++ {
++ /* imq_egress_ipv6 */
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET6,
++ .hooknum = NF_INET_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++ .priority = NF_IP6_PRI_LAST,
++#else
++ .priority = NF_IP6_PRI_NAT_SRC - 1,
++#endif
++ },
++#endif
++};
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++static int numdevs = CONFIG_IMQ_NUM_DEVS;
++#else
++static int numdevs = IMQ_MAX_DEVS;
++#endif
++
++static struct net_device *imq_devs_cache[IMQ_MAX_DEVS];
++
++#define IMQ_MAX_QUEUES 32
++static int numqueues = 1;
++static u32 imq_hashrnd;
++
++static inline __be16 pppoe_proto(const struct sk_buff *skb)
++{
++ return *((__be16 *)(skb_mac_header(skb) + ETH_HLEN +
++ sizeof(struct pppoe_hdr)));
++}
++
++static u16 imq_hash(struct net_device *dev, struct sk_buff *skb)
++{
++ unsigned int pull_len;
++ u16 protocol = skb->protocol;
++ u32 addr1, addr2;
++ u32 hash, ihl = 0;
++ union {
++ u16 in16[2];
++ u32 in32;
++ } ports;
++ u8 ip_proto;
++
++ pull_len = 0;
++
++recheck:
++ switch (protocol) {
++ case htons(ETH_P_8021Q): {
++ if (unlikely(skb_pull(skb, VLAN_HLEN) == NULL))
++ goto other;
++
++ pull_len += VLAN_HLEN;
++ skb->network_header += VLAN_HLEN;
++
++ protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
++ goto recheck;
++ }
++
++ case htons(ETH_P_PPP_SES): {
++ if (unlikely(skb_pull(skb, PPPOE_SES_HLEN) == NULL))
++ goto other;
++
++ pull_len += PPPOE_SES_HLEN;
++ skb->network_header += PPPOE_SES_HLEN;
++
++ protocol = pppoe_proto(skb);
++ goto recheck;
++ }
++
++ case htons(ETH_P_IP): {
++ const struct iphdr *iph = ip_hdr(skb);
++
++ if (unlikely(!pskb_may_pull(skb, sizeof(struct iphdr))))
++ goto other;
++
++ addr1 = iph->daddr;
++ addr2 = iph->saddr;
++
++ ip_proto = !(ip_hdr(skb)->frag_off & htons(IP_MF | IP_OFFSET)) ?
++ iph->protocol : 0;
++ ihl = ip_hdrlen(skb);
++
++ break;
++ }
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++ case htons(ETH_P_IPV6): {
++ const struct ipv6hdr *iph = ipv6_hdr(skb);
++
++ if (unlikely(!pskb_may_pull(skb, sizeof(struct ipv6hdr))))
++ goto other;
++
++ addr1 = iph->daddr.s6_addr32[3];
++ addr2 = iph->saddr.s6_addr32[3];
++ ihl = ipv6_skip_exthdr(skb, sizeof(struct ipv6hdr), &ip_proto);
++ if (unlikely(ihl < 0))
++ goto other;
++
++ break;
++ }
++#endif
++ default:
++other:
++ if (pull_len != 0) {
++ skb_push(skb, pull_len);
++ skb->network_header -= pull_len;
++ }
++
++ return (u16)(ntohs(protocol) % dev->real_num_tx_queues);
++ }
++
++ if (addr1 > addr2)
++ swap(addr1, addr2);
++
++ switch (ip_proto) {
++ case IPPROTO_TCP:
++ case IPPROTO_UDP:
++ case IPPROTO_DCCP:
++ case IPPROTO_ESP:
++ case IPPROTO_AH:
++ case IPPROTO_SCTP:
++ case IPPROTO_UDPLITE: {
++ if (likely(skb_copy_bits(skb, ihl, &ports.in32, 4) >= 0)) {
++ if (ports.in16[0] > ports.in16[1])
++ swap(ports.in16[0], ports.in16[1]);
++ break;
++ }
++ /* fall-through */
++ }
++ default:
++ ports.in32 = 0;
++ break;
++ }
++
++ if (pull_len != 0) {
++ skb_push(skb, pull_len);
++ skb->network_header -= pull_len;
++ }
++
++ hash = jhash_3words(addr1, addr2, ports.in32, imq_hashrnd ^ ip_proto);
++
++ return (u16)(((u64)hash * dev->real_num_tx_queues) >> 32);
++}
++
++static inline bool sk_tx_queue_recorded(struct sock *sk)
++{
++ return (sk_tx_queue_get(sk) >= 0);
++}
++
++static struct netdev_queue *imq_select_queue(struct net_device *dev,
++ struct sk_buff *skb)
++{
++ u16 queue_index = 0;
++ u32 hash;
++
++ if (likely(dev->real_num_tx_queues == 1))
++ goto out;
++
++ /* IMQ can be receiving ingress or engress packets. */
++
++ /* Check first for if rx_queue is set */
++ if (skb_rx_queue_recorded(skb)) {
++ queue_index = skb_get_rx_queue(skb);
++ goto out;
++ }
++
++ /* Check if socket has tx_queue set */
++ if (sk_tx_queue_recorded(skb->sk)) {
++ queue_index = sk_tx_queue_get(skb->sk);
++ goto out;
++ }
++
++ /* Try use socket hash */
++ if (skb->sk && skb->sk->sk_hash) {
++ hash = skb->sk->sk_hash;
++ queue_index =
++ (u16)(((u64)hash * dev->real_num_tx_queues) >> 32);
++ goto out;
++ }
++
++ /* Generate hash from packet data */
++ queue_index = imq_hash(dev, skb);
++
++out:
++ if (unlikely(queue_index >= dev->real_num_tx_queues))
++ queue_index = (u16)((u32)queue_index % dev->real_num_tx_queues);
++
++ skb_set_queue_mapping(skb, queue_index);
++ return netdev_get_tx_queue(dev, queue_index);
++}
++
++static struct net_device_stats *imq_get_stats(struct net_device *dev)
++{
++ return &dev->stats;
++}
++
++/* called for packets kfree'd in qdiscs at places other than enqueue */
++static void imq_skb_destructor(struct sk_buff *skb)
++{
++ struct nf_queue_entry *entry = skb->nf_queue_entry;
++
++ skb->nf_queue_entry = NULL;
++
++ if (entry) {
++ nf_queue_entry_release_refs(entry);
++ kfree(entry);
++ }
++
++ skb_restore_cb(skb); /* kfree backup */
++}
++
++static void imq_done_check_queue_mapping(struct sk_buff *skb,
++ struct net_device *dev)
++{
++ unsigned int queue_index;
++
++ /* Don't let queue_mapping be left too large after exiting IMQ */
++ if (likely(skb->dev != dev && skb->dev != NULL)) {
++ queue_index = skb_get_queue_mapping(skb);
++ if (unlikely(queue_index >= skb->dev->real_num_tx_queues)) {
++ queue_index = (u16)((u32)queue_index %
++ skb->dev->real_num_tx_queues);
++ skb_set_queue_mapping(skb, queue_index);
++ }
++ } else {
++ /* skb->dev was IMQ device itself or NULL, be on safe side and
++ * just clear queue mapping.
++ */
++ skb_set_queue_mapping(skb, 0);
++ }
++}
++
++static netdev_tx_t imq_dev_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ struct nf_queue_entry *entry = skb->nf_queue_entry;
++
++ skb->nf_queue_entry = NULL;
++ dev->trans_start = jiffies;
++
++ dev->stats.tx_bytes += skb->len;
++ dev->stats.tx_packets++;
++
++ if (unlikely(entry == NULL)) {
++ /* We don't know what is going on here.. packet is queued for
++ * imq device, but (probably) not by us.
++ *
++ * If this packet was not send here by imq_nf_queue(), then
++ * skb_save_cb() was not used and skb_free() should not show:
++ * WARNING: IMQ: kfree_skb: skb->cb_next:..
++ * and/or
++ * WARNING: IMQ: kfree_skb: skb->nf_queue_entry...
++ *
++ * However if this message is shown, then IMQ is somehow broken
++ * and you should report this to linuximq.net.
++ */
++
++ /* imq_dev_xmit is black hole that eats all packets, report that
++ * we eat this packet happily and increase dropped counters.
++ */
++
++ dev->stats.tx_dropped++;
++ dev_kfree_skb(skb);
++
++ return NETDEV_TX_OK;
++ }
++
++ skb_restore_cb(skb); /* restore skb->cb */
++
++ skb->imq_flags = 0;
++ skb->destructor = NULL;
++
++ imq_done_check_queue_mapping(skb, dev);
++
++ nf_reinject(entry, NF_ACCEPT);
++
++ return NETDEV_TX_OK;
++}
++
++static struct net_device *get_imq_device_by_index(int index)
++{
++ struct net_device *dev = NULL;
++ struct net *net;
++ char buf[8];
++
++ /* get device by name and cache result */
++ snprintf(buf, sizeof(buf), "imq%d", index);
++
++ /* Search device from all namespaces. */
++ for_each_net(net) {
++ dev = dev_get_by_name(net, buf);
++ if (dev)
++ break;
++ }
++
++ if (WARN_ON_ONCE(dev == NULL)) {
++ /* IMQ device not found. Exotic config? */
++ return ERR_PTR(-ENODEV);
++ }
++
++ imq_devs_cache[index] = dev;
++ dev_put(dev);
++
++ return dev;
++}
++
++static int imq_nf_queue(struct nf_queue_entry *entry, unsigned queue_num)
++{
++ struct net_device *dev;
++ struct sk_buff *skb_orig, *skb, *skb_shared;
++ struct Qdisc *q;
++ struct netdev_queue *txq;
++ spinlock_t *root_lock;
++ int users, index;
++ int retval = -EINVAL;
++ unsigned int orig_queue_index;
++
++ index = entry->skb->imq_flags & IMQ_F_IFMASK;
++ if (unlikely(index > numdevs - 1)) {
++ if (net_ratelimit())
++ printk(KERN_WARNING
++ "IMQ: invalid device specified, highest is %u\n",
++ numdevs - 1);
++ retval = -EINVAL;
++ goto out;
++ }
++
++ /* check for imq device by index from cache */
++ dev = imq_devs_cache[index];
++ if (unlikely(!dev)) {
++ dev = get_imq_device_by_index(index);
++ if (IS_ERR(dev)) {
++ retval = PTR_ERR(dev);
++ goto out;
++ }
++ }
++
++ if (unlikely(!(dev->flags & IFF_UP))) {
++ entry->skb->imq_flags = 0;
++ nf_reinject(entry, NF_ACCEPT);
++ retval = 0;
++ goto out;
++ }
++ dev->last_rx = jiffies;
++
++ skb = entry->skb;
++ skb_orig = NULL;
++
++ /* skb has owner? => make clone */
++ if (unlikely(skb->destructor)) {
++ skb_orig = skb;
++ skb = skb_clone(skb, GFP_ATOMIC);
++ if (unlikely(!skb)) {
++ retval = -ENOMEM;
++ goto out;
++ }
++ entry->skb = skb;
++ }
++
++ skb->nf_queue_entry = entry;
++
++ dev->stats.rx_bytes += skb->len;
++ dev->stats.rx_packets++;
++
++ if (!skb->dev) {
++ /* skb->dev == NULL causes problems, try the find cause. */
++ if (net_ratelimit()) {
++ dev_warn(&dev->dev,
++ "received packet with skb->dev == NULL\n");
++ dump_stack();
++ }
++
++ skb->dev = dev;
++ }
++
++ /* Disables softirqs for lock below */
++ rcu_read_lock_bh();
++
++ /* Multi-queue selection */
++ orig_queue_index = skb_get_queue_mapping(skb);
++ txq = imq_select_queue(dev, skb);
++
++ q = rcu_dereference(txq->qdisc);
++ if (unlikely(!q->enqueue))
++ goto packet_not_eaten_by_imq_dev;
++
++ root_lock = qdisc_lock(q);
++ spin_lock(root_lock);
++
++ users = atomic_read(&skb->users);
++
++ skb_shared = skb_get(skb); /* increase reference count by one */
++ skb_save_cb(skb_shared); /* backup skb->cb, as qdisc layer will
++ overwrite it */
++ qdisc_enqueue_root(skb_shared, q); /* might kfree_skb */
++
++ if (likely(atomic_read(&skb_shared->users) == users + 1)) {
++ kfree_skb(skb_shared); /* decrease reference count by one */
++
++ skb->destructor = &imq_skb_destructor;
++
++ /* cloned? */
++ if (unlikely(skb_orig))
++ kfree_skb(skb_orig); /* free original */
++
++ spin_unlock(root_lock);
++ rcu_read_unlock_bh();
++
++ /* schedule qdisc dequeue */
++ __netif_schedule(q);
++
++ retval = 0;
++ goto out;
++ } else {
++ skb_restore_cb(skb_shared); /* restore skb->cb */
++ skb->nf_queue_entry = NULL;
++ /* qdisc dropped packet and decreased skb reference count of
++ * skb, so we don't really want to and try refree as that would
++ * actually destroy the skb. */
++ spin_unlock(root_lock);
++ goto packet_not_eaten_by_imq_dev;
++ }
++
++packet_not_eaten_by_imq_dev:
++ skb_set_queue_mapping(skb, orig_queue_index);
++ rcu_read_unlock_bh();
++
++ /* cloned? restore original */
++ if (unlikely(skb_orig)) {
++ kfree_skb(skb);
++ entry->skb = skb_orig;
++ }
++ retval = -1;
++out:
++ return retval;
++}
++
++static unsigned int imq_nf_hook(unsigned int hook, struct sk_buff *pskb,
++ const struct net_device *indev,
++ const struct net_device *outdev,
++ int (*okfn)(struct sk_buff *))
++{
++ return (pskb->imq_flags & IMQ_F_ENQUEUE) ? NF_IMQ_QUEUE : NF_ACCEPT;
++}
++
++static int imq_close(struct net_device *dev)
++{
++ netif_stop_queue(dev);
++ return 0;
++}
++
++static int imq_open(struct net_device *dev)
++{
++ netif_start_queue(dev);
++ return 0;
++}
++
++static const struct net_device_ops imq_netdev_ops = {
++ .ndo_open = imq_open,
++ .ndo_stop = imq_close,
++ .ndo_start_xmit = imq_dev_xmit,
++ .ndo_get_stats = imq_get_stats,
++};
++
++static void imq_setup(struct net_device *dev)
++{
++ dev->netdev_ops = &imq_netdev_ops;
++ dev->type = ARPHRD_VOID;
++ dev->mtu = 16000; /* too small? */
++ dev->tx_queue_len = 11000; /* too big? */
++ dev->flags = IFF_NOARP;
++ dev->features = NETIF_F_SG | NETIF_F_FRAGLIST |
++ NETIF_F_GSO | NETIF_F_HW_CSUM |
++ NETIF_F_HIGHDMA;
++ dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE |
++ IFF_TX_SKB_SHARING);
++}
++
++static int imq_validate(struct nlattr *tb[], struct nlattr *data[])
++{
++ int ret = 0;
++
++ if (tb[IFLA_ADDRESS]) {
++ if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN) {
++ ret = -EINVAL;
++ goto end;
++ }
++ if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS]))) {
++ ret = -EADDRNOTAVAIL;
++ goto end;
++ }
++ }
++ return 0;
++end:
++ printk(KERN_WARNING "IMQ: imq_validate failed (%d)\n", ret);
++ return ret;
++}
++
++static struct rtnl_link_ops imq_link_ops __read_mostly = {
++ .kind = "imq",
++ .priv_size = 0,
++ .setup = imq_setup,
++ .validate = imq_validate,
++};
++
++static const struct nf_queue_handler imq_nfqh = {
++ .name = "imq",
++ .outfn = imq_nf_queue,
++};
++
++static int __init imq_init_hooks(void)
++{
++ int ret;
++
++ nf_register_queue_imq_handler(&imq_nfqh);
++
++ ret = nf_register_hooks(imq_ops, ARRAY_SIZE(imq_ops));
++ if (ret < 0)
++ nf_unregister_queue_imq_handler();
++
++ return ret;
++}
++
++static int __init imq_init_one(int index)
++{
++ struct net_device *dev;
++ int ret;
++
++ dev = alloc_netdev_mq(0, "imq%d", imq_setup, numqueues);
++ if (!dev)
++ return -ENOMEM;
++
++ ret = dev_alloc_name(dev, dev->name);
++ if (ret < 0)
++ goto fail;
++
++ dev->rtnl_link_ops = &imq_link_ops;
++ ret = register_netdevice(dev);
++ if (ret < 0)
++ goto fail;
++
++ return 0;
++fail:
++ free_netdev(dev);
++ return ret;
++}
++
++static int __init imq_init_devs(void)
++{
++ int err, i;
++
++ if (numdevs < 1 || numdevs > IMQ_MAX_DEVS) {
++ printk(KERN_ERR "IMQ: numdevs has to be betweed 1 and %u\n",
++ IMQ_MAX_DEVS);
++ return -EINVAL;
++ }
++
++ if (numqueues < 1 || numqueues > IMQ_MAX_QUEUES) {
++ printk(KERN_ERR "IMQ: numqueues has to be betweed 1 and %u\n",
++ IMQ_MAX_QUEUES);
++ return -EINVAL;
++ }
++
++ get_random_bytes(&imq_hashrnd, sizeof(imq_hashrnd));
++
++ rtnl_lock();
++ err = __rtnl_link_register(&imq_link_ops);
++
++ for (i = 0; i < numdevs && !err; i++)
++ err = imq_init_one(i);
++
++ if (err) {
++ __rtnl_link_unregister(&imq_link_ops);
++ memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++ }
++ rtnl_unlock();
++
++ return err;
++}
++
++static int __init imq_init_module(void)
++{
++ int err;
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++ BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS > 16);
++ BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS < 2);
++ BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS - 1 > IMQ_F_IFMASK);
++#endif
++
++ err = imq_init_devs();
++ if (err) {
++ printk(KERN_ERR "IMQ: Error trying imq_init_devs(net)\n");
++ return err;
++ }
++
++ err = imq_init_hooks();
++ if (err) {
++ printk(KERN_ERR "IMQ: Error trying imq_init_hooks()\n");
++ rtnl_link_unregister(&imq_link_ops);
++ memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++ return err;
++ }
++
++ printk(KERN_INFO "IMQ driver loaded successfully. "
++ "(numdevs = %d, numqueues = %d)\n", numdevs, numqueues);
++
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ printk(KERN_INFO "\tHooking IMQ before NAT on PREROUTING.\n");
++#else
++ printk(KERN_INFO "\tHooking IMQ after NAT on PREROUTING.\n");
++#endif
++#if defined(CONFIG_IMQ_BEHAVIOR_AB) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ printk(KERN_INFO "\tHooking IMQ before NAT on POSTROUTING.\n");
++#else
++ printk(KERN_INFO "\tHooking IMQ after NAT on POSTROUTING.\n");
++#endif
++
++ return 0;
++}
++
++static void __exit imq_unhook(void)
++{
++ nf_unregister_hooks(imq_ops, ARRAY_SIZE(imq_ops));
++ nf_unregister_queue_imq_handler();
++}
++
++static void __exit imq_cleanup_devs(void)
++{
++ rtnl_link_unregister(&imq_link_ops);
++ memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++}
++
++static void __exit imq_exit_module(void)
++{
++ imq_unhook();
++ imq_cleanup_devs();
++ printk(KERN_INFO "IMQ driver unloaded successfully.\n");
++}
++
++module_init(imq_init_module);
++module_exit(imq_exit_module);
++
++module_param(numdevs, int, 0);
++module_param(numqueues, int, 0);
++MODULE_PARM_DESC(numdevs, "number of IMQ devices (how many imq* devices will "
++ "be created)");
++MODULE_PARM_DESC(numqueues, "number of queues per IMQ device");
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See "
++ "http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_RTNL_LINK("imq");
++
+diff -uNr linux-3.1/drivers/net/Kconfig linux-3.1-imq/drivers/net/Kconfig
+--- linux-3.1/drivers/net/Kconfig 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.1-imq/drivers/net/Kconfig 2011-11-04 11:12:52.106390309 +0200
+@@ -124,6 +124,125 @@
+ To compile this driver as a module, choose M here: the module
+ will be called eql. If unsure, say N.
+
++config IMQ
++ tristate "IMQ (intermediate queueing device) support"
++ depends on NETDEVICES && NETFILTER
++ ---help---
++ The IMQ device(s) is used as placeholder for QoS queueing
++ disciplines. Every packet entering/leaving the IP stack can be
++ directed through the IMQ device where it's enqueued/dequeued to the
++ attached qdisc. This allows you to treat network devices as classes
++ and distribute bandwidth among them. Iptables is used to specify
++ through which IMQ device, if any, packets travel.
++
++ More information at: http://www.linuximq.net/
++
++ To compile this driver as a module, choose M here: the module
++ will be called imq. If unsure, say N.
++
++choice
++ prompt "IMQ behavior (PRE/POSTROUTING)"
++ depends on IMQ
++ default IMQ_BEHAVIOR_AB
++ help
++ This setting defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ IMQ can work in any of the following ways:
++
++ PREROUTING | POSTROUTING
++ -----------------|-------------------
++ #1 After NAT | After NAT
++ #2 After NAT | Before NAT
++ #3 Before NAT | After NAT
++ #4 Before NAT | Before NAT
++
++ The default behavior is to hook before NAT on PREROUTING
++ and after NAT on POSTROUTING (#3).
++
++ This settings are specially usefull when trying to use IMQ
++ to shape NATed clients.
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AA
++ bool "IMQ AA"
++ help
++ This setting defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: After NAT
++ POSTROUTING: After NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AB
++ bool "IMQ AB"
++ help
++ This setting defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: After NAT
++ POSTROUTING: Before NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BA
++ bool "IMQ BA"
++ help
++ This setting defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: Before NAT
++ POSTROUTING: After NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BB
++ bool "IMQ BB"
++ help
++ This setting defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: Before NAT
++ POSTROUTING: Before NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++endchoice
++
++config IMQ_NUM_DEVS
++ int "Number of IMQ devices"
++ range 2 16
++ depends on IMQ
++ default "16"
++ help
++ This setting defines how many IMQ devices will be created.
++
++ The default value is 16.
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
+ config TUN
+ tristate "Universal TUN/TAP device driver support"
+ select CRC32
+diff -uNr linux-3.1/drivers/net/Makefile linux-3.1-imq/drivers/net/Makefile
+--- linux-3.1/drivers/net/Makefile 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.1-imq/drivers/net/Makefile 2011-11-04 11:12:52.106390309 +0200
+@@ -175,6 +175,7 @@
+ obj-$(CONFIG_XEN_NETDEV_BACKEND) += xen-netback/
+
+ obj-$(CONFIG_DUMMY) += dummy.o
++obj-$(CONFIG_IMQ) += imq.o
+ obj-$(CONFIG_IFB) += ifb.o
+ obj-$(CONFIG_MACVLAN) += macvlan.o
+ obj-$(CONFIG_MACVTAP) += macvtap.o
+diff -uNr linux-3.1/include/linux/imq.h linux-3.1-imq/include/linux/imq.h
+--- linux-3.1/include/linux/imq.h 1970-01-01 02:00:00.000000000 +0200
++++ linux-3.1-imq/include/linux/imq.h 2011-11-04 11:12:52.109723710 +0200
+@@ -0,0 +1,13 @@
++#ifndef _IMQ_H
++#define _IMQ_H
++
++/* IFMASK (16 device indexes, 0 to 15) and flag(s) fit in 5 bits */
++#define IMQ_F_BITS 5
++
++#define IMQ_F_IFMASK 0x0f
++#define IMQ_F_ENQUEUE 0x10
++
++#define IMQ_MAX_DEVS (IMQ_F_IFMASK + 1)
++
++#endif /* _IMQ_H */
++
+diff -uNr linux-3.1/include/linux/netfilter/xt_IMQ.h linux-3.1-imq/include/linux/netfilter/xt_IMQ.h
+--- linux-3.1/include/linux/netfilter/xt_IMQ.h 1970-01-01 02:00:00.000000000 +0200
++++ linux-3.1-imq/include/linux/netfilter/xt_IMQ.h 2011-11-04 11:12:52.109723710 +0200
+@@ -0,0 +1,9 @@
++#ifndef _XT_IMQ_H
++#define _XT_IMQ_H
++
++struct xt_imq_info {
++ unsigned int todev; /* target imq device */
++};
++
++#endif /* _XT_IMQ_H */
++
+diff -uNr linux-3.1/include/linux/netfilter.h linux-3.1-imq/include/linux/netfilter.h
+--- linux-3.1/include/linux/netfilter.h 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.1-imq/include/linux/netfilter.h 2011-11-04 11:12:52.109723710 +0200
+@@ -22,7 +22,8 @@
+ #define NF_QUEUE 3
+ #define NF_REPEAT 4
+ #define NF_STOP 5
+-#define NF_MAX_VERDICT NF_STOP
++#define NF_IMQ_QUEUE 6
++#define NF_MAX_VERDICT NF_IMQ_QUEUE
+
+ /* we overload the higher bits for encoding auxiliary data such as the queue
+ * number or errno values. Not nice, but better than additional function
+diff -uNr linux-3.1/include/linux/netfilter_ipv4/ipt_IMQ.h linux-3.1-imq/include/linux/netfilter_ipv4/ipt_IMQ.h
+--- linux-3.1/include/linux/netfilter_ipv4/ipt_IMQ.h 1970-01-01 02:00:00.000000000 +0200
++++ linux-3.1-imq/include/linux/netfilter_ipv4/ipt_IMQ.h 2011-11-04 11:12:52.109723710 +0200
+@@ -0,0 +1,10 @@
++#ifndef _IPT_IMQ_H
++#define _IPT_IMQ_H
++
++/* Backwards compatibility for old userspace */
++#include <linux/netfilter/xt_IMQ.h>
++
++#define ipt_imq_info xt_imq_info
++
++#endif /* _IPT_IMQ_H */
++
+diff -uNr linux-3.1/include/linux/netfilter_ipv6/ip6t_IMQ.h linux-3.1-imq/include/linux/netfilter_ipv6/ip6t_IMQ.h
+--- linux-3.1/include/linux/netfilter_ipv6/ip6t_IMQ.h 1970-01-01 02:00:00.000000000 +0200
++++ linux-3.1-imq/include/linux/netfilter_ipv6/ip6t_IMQ.h 2011-11-04 11:12:52.113057113 +0200
+@@ -0,0 +1,10 @@
++#ifndef _IP6T_IMQ_H
++#define _IP6T_IMQ_H
++
++/* Backwards compatibility for old userspace */
++#include <linux/netfilter/xt_IMQ.h>
++
++#define ip6t_imq_info xt_imq_info
++
++#endif /* _IP6T_IMQ_H */
++
+diff -uNr linux-3.1/include/linux/skbuff.h linux-3.1-imq/include/linux/skbuff.h
+--- linux-3.1/include/linux/skbuff.h 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.1-imq/include/linux/skbuff.h 2011-11-04 11:12:52.116390515 +0200
+@@ -29,6 +29,9 @@
+ #include <linux/rcupdate.h>
+ #include <linux/dmaengine.h>
+ #include <linux/hrtimer.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+
+ /* Don't change this without changing skb_csum_unnecessary! */
+ #define CHECKSUM_NONE 0
+@@ -356,6 +359,9 @@
+ * first. This is owned by whoever has the skb queued ATM.
+ */
+ char cb[48] __aligned(8);
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ void *cb_next;
++#endif
+
+ unsigned long _skb_refdst;
+ #ifdef CONFIG_XFRM
+@@ -394,6 +400,9 @@
+ #ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
+ struct sk_buff *nfct_reasm;
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ struct nf_queue_entry *nf_queue_entry;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ struct nf_bridge_info *nf_bridge;
+ #endif
+@@ -418,6 +427,10 @@
+
+ /* 0/13 bit hole */
+
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ __u8 imq_flags:IMQ_F_BITS;
++#endif
++
+ #ifdef CONFIG_NET_DMA
+ dma_cookie_t dma_cookie;
+ #endif
+@@ -504,6 +517,12 @@
+ return (struct rtable *)skb_dst(skb);
+ }
+
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++extern int skb_save_cb(struct sk_buff *skb);
++extern int skb_restore_cb(struct sk_buff *skb);
++#endif
++
+ extern void kfree_skb(struct sk_buff *skb);
+ extern void consume_skb(struct sk_buff *skb);
+ extern void __kfree_skb(struct sk_buff *skb);
+@@ -2157,6 +2176,10 @@
+ dst->nfct_reasm = src->nfct_reasm;
+ nf_conntrack_get_reasm(src->nfct_reasm);
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ dst->imq_flags = src->imq_flags;
++ dst->nf_queue_entry = src->nf_queue_entry;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ dst->nf_bridge = src->nf_bridge;
+ nf_bridge_get(src->nf_bridge);
+diff -uNr linux-3.1/include/net/netfilter/nf_queue.h linux-3.1-imq/include/net/netfilter/nf_queue.h
+--- linux-3.1/include/net/netfilter/nf_queue.h 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.1-imq/include/net/netfilter/nf_queue.h 2011-11-04 11:12:52.116390515 +0200
+@@ -30,5 +30,11 @@
+ const struct nf_queue_handler *qh);
+ extern void nf_unregister_queue_handlers(const struct nf_queue_handler *qh);
+ extern void nf_reinject(struct nf_queue_entry *entry, unsigned int verdict);
++extern void nf_queue_entry_release_refs(struct nf_queue_entry *entry);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++extern void nf_register_queue_imq_handler(const struct nf_queue_handler *qh);
++extern void nf_unregister_queue_imq_handler(void);
++#endif
+
+ #endif /* _NF_QUEUE_H */
+diff -uNr linux-3.1/net/core/dev.c linux-3.1-imq/net/core/dev.c
+--- linux-3.1/net/core/dev.c 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.1-imq/net/core/dev.c 2011-11-04 11:12:52.119723915 +0200
+@@ -98,6 +98,9 @@
+ #include <net/net_namespace.h>
+ #include <net/sock.h>
+ #include <linux/rtnetlink.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+ #include <linux/proc_fs.h>
+ #include <linux/seq_file.h>
+ #include <linux/stat.h>
+@@ -2126,7 +2129,12 @@
+ if (dev->priv_flags & IFF_XMIT_DST_RELEASE)
+ skb_dst_drop(skb);
+
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ if (!list_empty(&ptype_all) &&
++ !(skb->imq_flags & IMQ_F_ENQUEUE))
++#else
+ if (!list_empty(&ptype_all))
++#endif
+ dev_queue_xmit_nit(skb, dev);
+
+ skb_orphan_try(skb);
+diff -uNr linux-3.1/net/core/skbuff.c linux-3.1-imq/net/core/skbuff.c
+--- linux-3.1/net/core/skbuff.c 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.1-imq/net/core/skbuff.c 2011-11-04 11:12:52.123057315 +0200
+@@ -73,6 +73,9 @@
+
+ static struct kmem_cache *skbuff_head_cache __read_mostly;
+ static struct kmem_cache *skbuff_fclone_cache __read_mostly;
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++static struct kmem_cache *skbuff_cb_store_cache __read_mostly;
++#endif
+
+ static void sock_pipe_buf_release(struct pipe_inode_info *pipe,
+ struct pipe_buffer *buf)
+@@ -92,6 +95,82 @@
+ return 1;
+ }
+
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++/* Control buffer save/restore for IMQ devices */
++struct skb_cb_table {
++ char cb[48] __aligned(8);
++ void *cb_next;
++ atomic_t refcnt;
++};
++
++static DEFINE_SPINLOCK(skb_cb_store_lock);
++
++int skb_save_cb(struct sk_buff *skb)
++{
++ struct skb_cb_table *next;
++
++ next = kmem_cache_alloc(skbuff_cb_store_cache, GFP_ATOMIC);
++ if (!next)
++ return -ENOMEM;
++
++ BUILD_BUG_ON(sizeof(skb->cb) != sizeof(next->cb));
++
++ memcpy(next->cb, skb->cb, sizeof(skb->cb));
++ next->cb_next = skb->cb_next;
++
++ atomic_set(&next->refcnt, 1);
++
++ skb->cb_next = next;
++ return 0;
++}
++EXPORT_SYMBOL(skb_save_cb);
++
++int skb_restore_cb(struct sk_buff *skb)
++{
++ struct skb_cb_table *next;
++
++ if (!skb->cb_next)
++ return 0;
++
++ next = skb->cb_next;
++
++ BUILD_BUG_ON(sizeof(skb->cb) != sizeof(next->cb));
++
++ memcpy(skb->cb, next->cb, sizeof(skb->cb));
++ skb->cb_next = next->cb_next;
++
++ spin_lock(&skb_cb_store_lock);
++
++ if (atomic_dec_and_test(&next->refcnt))
++ kmem_cache_free(skbuff_cb_store_cache, next);
++
++ spin_unlock(&skb_cb_store_lock);
++
++ return 0;
++}
++EXPORT_SYMBOL(skb_restore_cb);
++
++static void skb_copy_stored_cb(struct sk_buff *new, const struct sk_buff *__old)
++{
++ struct skb_cb_table *next;
++ struct sk_buff *old;
++
++ if (!__old->cb_next) {
++ new->cb_next = NULL;
++ return;
++ }
++
++ spin_lock(&skb_cb_store_lock);
++
++ old = (struct sk_buff *)__old;
++
++ next = old->cb_next;
++ atomic_inc(&next->refcnt);
++ new->cb_next = next;
++
++ spin_unlock(&skb_cb_store_lock);
++}
++#endif
+
+ /* Pipe buffer operations for a socket. */
+ static const struct pipe_buf_operations sock_pipe_buf_ops = {
+@@ -392,6 +471,26 @@
+ WARN_ON(in_irq());
+ skb->destructor(skb);
+ }
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ /* This should not happen. When it does, avoid memleak by restoring
++ the chain of cb-backups. */
++ while (skb->cb_next != NULL) {
++ if (net_ratelimit())
++ printk(KERN_WARNING "IMQ: kfree_skb: skb->cb_next: "
++ "%08x\n", (unsigned int)skb->cb_next);
++
++ skb_restore_cb(skb);
++ }
++ /* This should not happen either, nf_queue_entry is nullified in
++ * imq_dev_xmit(). If we have non-NULL nf_queue_entry then we are
++ * leaking entry pointers, maybe memory. We don't know if this is
++ * pointer to already freed memory, or should this be freed.
++ * If this happens we need to add refcounting, etc for nf_queue_entry.
++ */
++ if (skb->nf_queue_entry && net_ratelimit())
++ printk(KERN_WARNING
++ "IMQ: kfree_skb: skb->nf_queue_entry != NULL");
++#endif
+ #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+ nf_conntrack_put(skb->nfct);
+ #endif
+@@ -533,6 +632,9 @@
+ new->sp = secpath_get(old->sp);
+ #endif
+ memcpy(new->cb, old->cb, sizeof(old->cb));
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ skb_copy_stored_cb(new, old);
++#endif
+ new->csum = old->csum;
+ new->local_df = old->local_df;
+ new->pkt_type = old->pkt_type;
+@@ -2888,6 +2990,13 @@
+ 0,
+ SLAB_HWCACHE_ALIGN|SLAB_PANIC,
+ NULL);
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ skbuff_cb_store_cache = kmem_cache_create("skbuff_cb_store_cache",
++ sizeof(struct skb_cb_table),
++ 0,
++ SLAB_HWCACHE_ALIGN|SLAB_PANIC,
++ NULL);
++#endif
+ }
+
+ /**
+diff -uNr linux-3.1/net/ipv6/ip6_output.c linux-3.1-imq/net/ipv6/ip6_output.c
+--- linux-3.1/net/ipv6/ip6_output.c 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.1-imq/net/ipv6/ip6_output.c 2011-11-04 11:12:52.123057315 +0200
+@@ -102,9 +102,6 @@
+ struct net_device *dev = dst->dev;
+ struct neighbour *neigh;
+
+- skb->protocol = htons(ETH_P_IPV6);
+- skb->dev = dev;
+-
+ if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr)) {
+ struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));
+
+@@ -170,6 +167,11 @@
+ return 0;
+ }
+
++ /* IMQ-patch: moved setting skb->dev and skb->protocol from
++ * ip6_finish_output2 to fix crashing at netif_skb_features(). */
++ skb->protocol = htons(ETH_P_IPV6);
++ skb->dev = dev;
++
+ return NF_HOOK_COND(NFPROTO_IPV6, NF_INET_POST_ROUTING, skb, NULL, dev,
+ ip6_finish_output,
+ !(IP6CB(skb)->flags & IP6SKB_REROUTED));
+diff -uNr linux-3.1/net/netfilter/core.c linux-3.1-imq/net/netfilter/core.c
+--- linux-3.1/net/netfilter/core.c 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.1-imq/net/netfilter/core.c 2011-11-04 11:12:52.123057315 +0200
+@@ -179,9 +179,11 @@
+ ret = NF_DROP_GETERR(verdict);
+ if (ret == 0)
+ ret = -EPERM;
+- } else if ((verdict & NF_VERDICT_MASK) == NF_QUEUE) {
++ } else if ((verdict & NF_VERDICT_MASK) == NF_QUEUE ||
++ (verdict & NF_VERDICT_MASK) == NF_IMQ_QUEUE) {
+ ret = nf_queue(skb, elem, pf, hook, indev, outdev, okfn,
+- verdict >> NF_VERDICT_QBITS);
++ verdict >> NF_VERDICT_QBITS,
++ verdict & NF_VERDICT_MASK);
+ if (ret < 0) {
+ if (ret == -ECANCELED)
+ goto next_hook;
+diff -uNr linux-3.1/net/netfilter/Kconfig linux-3.1-imq/net/netfilter/Kconfig
+--- linux-3.1/net/netfilter/Kconfig 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.1-imq/net/netfilter/Kconfig 2011-11-04 11:12:52.123057315 +0200
+@@ -507,6 +507,18 @@
+ For more information on the LEDs available on your system, see
+ Documentation/leds-class.txt
+
++config NETFILTER_XT_TARGET_IMQ
++ tristate '"IMQ" target support'
++ depends on NETFILTER_XTABLES
++ depends on IP_NF_MANGLE || IP6_NF_MANGLE
++ select IMQ
++ default m if NETFILTER_ADVANCED=n
++ help
++ This option adds a `IMQ' target which is used to specify if and
++ to which imq device packets should get enqueued/dequeued.
++
++ To compile it as a module, choose M here. If unsure, say N.
++
+ config NETFILTER_XT_TARGET_MARK
+ tristate '"MARK" target support'
+ depends on NETFILTER_ADVANCED
+diff -uNr linux-3.1/net/netfilter/Makefile linux-3.1-imq/net/netfilter/Makefile
+--- linux-3.1/net/netfilter/Makefile 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.1-imq/net/netfilter/Makefile 2011-11-04 11:12:52.123057315 +0200
+@@ -56,6 +56,7 @@
+ obj-$(CONFIG_NETFILTER_XT_TARGET_CT) += xt_CT.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_HL) += xt_HL.o
++obj-$(CONFIG_NETFILTER_XT_TARGET_IMQ) += xt_IMQ.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_LED) += xt_LED.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_NFLOG) += xt_NFLOG.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_NFQUEUE) += xt_NFQUEUE.o
+diff -uNr linux-3.1/net/netfilter/nf_internals.h linux-3.1-imq/net/netfilter/nf_internals.h
+--- linux-3.1/net/netfilter/nf_internals.h 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.1-imq/net/netfilter/nf_internals.h 2011-11-04 11:12:52.123057315 +0200
+@@ -29,7 +29,7 @@
+ struct net_device *indev,
+ struct net_device *outdev,
+ int (*okfn)(struct sk_buff *),
+- unsigned int queuenum);
++ unsigned int queuenum, unsigned int queuetype);
+ extern int __init netfilter_queue_init(void);
+
+ /* nf_log.c */
+diff -uNr linux-3.1/net/netfilter/nf_queue.c linux-3.1-imq/net/netfilter/nf_queue.c
+--- linux-3.1/net/netfilter/nf_queue.c 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.1-imq/net/netfilter/nf_queue.c 2011-11-04 11:12:52.123057315 +0200
+@@ -22,6 +22,26 @@
+
+ static DEFINE_MUTEX(queue_handler_mutex);
+
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++static const struct nf_queue_handler *queue_imq_handler;
++
++void nf_register_queue_imq_handler(const struct nf_queue_handler *qh)
++{
++ mutex_lock(&queue_handler_mutex);
++ rcu_assign_pointer(queue_imq_handler, qh);
++ mutex_unlock(&queue_handler_mutex);
++}
++EXPORT_SYMBOL_GPL(nf_register_queue_imq_handler);
++
++void nf_unregister_queue_imq_handler(void)
++{
++ mutex_lock(&queue_handler_mutex);
++ rcu_assign_pointer(queue_imq_handler, NULL);
++ mutex_unlock(&queue_handler_mutex);
++}
++EXPORT_SYMBOL_GPL(nf_unregister_queue_imq_handler);
++#endif
++
+ /* return EBUSY when somebody else is registered, return EEXIST if the
+ * same handler is registered, return 0 in case of success. */
+ int nf_register_queue_handler(u_int8_t pf, const struct nf_queue_handler *qh)
+@@ -92,7 +112,7 @@
+ }
+ EXPORT_SYMBOL_GPL(nf_unregister_queue_handlers);
+
+-static void nf_queue_entry_release_refs(struct nf_queue_entry *entry)
++void nf_queue_entry_release_refs(struct nf_queue_entry *entry)
+ {
+ /* Release those devices we held, or Alexey will kill me. */
+ if (entry->indev)
+@@ -112,6 +132,7 @@
+ /* Drop reference to owner of hook which queued us. */
+ module_put(entry->elem->owner);
+ }
++EXPORT_SYMBOL_GPL(nf_queue_entry_release_refs);
+
+ /*
+ * Any packet that leaves via this function must come back
+@@ -123,7 +144,8 @@
+ struct net_device *indev,
+ struct net_device *outdev,
+ int (*okfn)(struct sk_buff *),
+- unsigned int queuenum)
++ unsigned int queuenum,
++ unsigned int queuetype)
+ {
+ int status = -ENOENT;
+ struct nf_queue_entry *entry = NULL;
+@@ -137,7 +159,17 @@
+ /* QUEUE == DROP if no one is waiting, to be safe. */
+ rcu_read_lock();
+
+- qh = rcu_dereference(queue_handler[pf]);
++ if (queuetype == NF_IMQ_QUEUE) {
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ qh = rcu_dereference(queue_imq_handler);
++#else
++ BUG();
++ goto err_unlock;
++#endif
++ } else {
++ qh = rcu_dereference(queue_handler[pf]);
++ }
++
+ if (!qh) {
+ status = -ESRCH;
+ goto err_unlock;
+@@ -209,7 +241,8 @@
+ struct net_device *indev,
+ struct net_device *outdev,
+ int (*okfn)(struct sk_buff *),
+- unsigned int queuenum)
++ unsigned int queuenum,
++ unsigned int queuetype)
+ {
+ struct sk_buff *segs;
+ int err;
+@@ -217,7 +250,7 @@
+
+ if (!skb_is_gso(skb))
+ return __nf_queue(skb, elem, pf, hook, indev, outdev, okfn,
+- queuenum);
++ queuenum, queuetype);
+
+ switch (pf) {
+ case NFPROTO_IPV4:
+@@ -244,7 +277,7 @@
+ segs->next = NULL;
+ if (err == 0)
+ err = __nf_queue(segs, elem, pf, hook, indev,
+- outdev, okfn, queuenum);
++ outdev, okfn, queuenum, queuetype);
+ if (err == 0)
+ queued++;
+ else
+@@ -299,9 +332,11 @@
+ local_bh_enable();
+ break;
+ case NF_QUEUE:
++ case NF_IMQ_QUEUE:
+ err = __nf_queue(skb, elem, entry->pf, entry->hook,
+ entry->indev, entry->outdev, entry->okfn,
+- verdict >> NF_VERDICT_QBITS);
++ verdict >> NF_VERDICT_QBITS,
++ verdict & NF_VERDICT_MASK);
+ if (err < 0) {
+ if (err == -ECANCELED)
+ goto next_hook;
+diff -uNr linux-3.1/net/netfilter/xt_IMQ.c linux-3.1-imq/net/netfilter/xt_IMQ.c
+--- linux-3.1/net/netfilter/xt_IMQ.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-3.1-imq/net/netfilter/xt_IMQ.c 2011-11-04 11:12:52.123057315 +0200
+@@ -0,0 +1,74 @@
++/*
++ * This target marks packets to be enqueued to an imq device
++ */
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_IMQ.h>
++#include <linux/imq.h>
++
++static unsigned int imq_target(struct sk_buff *pskb,
++ const struct xt_action_param *par)
++{
++ const struct xt_imq_info *mr = par->targinfo;
++
++ pskb->imq_flags = (mr->todev & IMQ_F_IFMASK) | IMQ_F_ENQUEUE;
++
++ return XT_CONTINUE;
++}
++
++static int imq_checkentry(const struct xt_tgchk_param *par)
++{
++ struct xt_imq_info *mr = par->targinfo;
++
++ if (mr->todev > IMQ_MAX_DEVS - 1) {
++ printk(KERN_WARNING
++ "IMQ: invalid device specified, highest is %u\n",
++ IMQ_MAX_DEVS - 1);
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static struct xt_target xt_imq_reg[] __read_mostly = {
++ {
++ .name = "IMQ",
++ .family = AF_INET,
++ .checkentry = imq_checkentry,
++ .target = imq_target,
++ .targetsize = sizeof(struct xt_imq_info),
++ .table = "mangle",
++ .me = THIS_MODULE
++ },
++ {
++ .name = "IMQ",
++ .family = AF_INET6,
++ .checkentry = imq_checkentry,
++ .target = imq_target,
++ .targetsize = sizeof(struct xt_imq_info),
++ .table = "mangle",
++ .me = THIS_MODULE
++ },
++};
++
++static int __init imq_init(void)
++{
++ return xt_register_targets(xt_imq_reg, ARRAY_SIZE(xt_imq_reg));
++}
++
++static void __exit imq_fini(void)
++{
++ xt_unregister_targets(xt_imq_reg, ARRAY_SIZE(xt_imq_reg));
++}
++
++module_init(imq_init);
++module_exit(imq_fini);
++
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. "
++ "See http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("ipt_IMQ");
++MODULE_ALIAS("ip6t_IMQ");
++
--- /dev/null
+diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
+index daa056e..fe03b09 100644
+--- a/arch/arm/mach-omap2/twl-common.c
++++ b/arch/arm/mach-omap2/twl-common.c
+@@ -261,6 +261,7 @@ static struct regulator_init_data omap4_vusb_idata = {
+ static struct regulator_init_data omap4_clk32kg_idata = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
++ .always_on = true,
+ },
+ };
+
--- /dev/null
+diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
+index 7f47092..2a05d3d 100644
+--- a/arch/arm/mach-omap2/id.c
++++ b/arch/arm/mach-omap2/id.c
+@@ -389,8 +389,10 @@ static void __init omap4_check_revision(void)
+ omap_revision = OMAP4430_REV_ES2_1;
+ break;
+ case 4:
+- default:
+ omap_revision = OMAP4430_REV_ES2_2;
++ case 6:
++ default:
++ omap_revision = OMAP4430_REV_ES2_3;
+ }
+ break;
+ case 0xb94e:
+@@ -403,7 +405,7 @@ static void __init omap4_check_revision(void)
+ break;
+ default:
+ /* Unknown default to latest silicon rev as default */
+- omap_revision = OMAP4430_REV_ES2_2;
++ omap_revision = OMAP4430_REV_ES2_3;
+ }
+
+ pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16,
+diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+index 7695e5d..71d3e36 100644
+--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
++++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+@@ -2257,7 +2257,8 @@ static struct omap_hwmod_class omap44xx_i2c_hwmod_class = {
+ };
+
+ static struct omap_i2c_dev_attr i2c_dev_attr = {
+- .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
++ .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE |
++ OMAP_I2C_FLAG_RESET_REGS_POSTIDLE,
+ };
+
+ /* i2c1 */
+diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
+index 408a12f..e279395 100644
+--- a/arch/arm/plat-omap/include/plat/cpu.h
++++ b/arch/arm/plat-omap/include/plat/cpu.h
+@@ -391,6 +391,7 @@ IS_OMAP_TYPE(3517, 0x3517)
+ #define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8))
+ #define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8))
+ #define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8))
++#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8))
+
+ #define OMAP446X_CLASS 0x44600044
+ #define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8))
--- /dev/null
+diff -Naur linux-3.2.19.org/sound/arm/bcm2835-ctl.c linux-3.2.19/sound/arm/bcm2835-ctl.c
+--- linux-3.2.19.org/sound/arm/bcm2835-ctl.c 2012-06-04 21:11:15.000000000 +0200
++++ linux-3.2.19/sound/arm/bcm2835-ctl.c 2012-06-04 21:32:37.969298501 +0200
+@@ -33,6 +33,19 @@
+
+ #include "bcm2835.h"
+
++
++/* functions to convert alsa to chip volume and back. */
++int alsa2chip(int vol)
++{
++ return -((vol << 8) / 100);
++}
++
++int chip2alsa(int vol)
++{
++ return -((vol * 100) >> 8);
++}
++
++
+ static int snd_bcm2835_ctl_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+ {
+@@ -64,7 +77,7 @@
+ BUG_ON(!chip && !(chip->avail_substreams & AVAIL_SUBSTREAMS_MASK));
+
+ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME)
+- ucontrol->value.integer.value[0] = chip->volume;
++ ucontrol->value.integer.value[0] = chip2alsa(chip->volume);
+ else if (kcontrol->private_value == PCM_PLAYBACK_MUTE)
+ ucontrol->value.integer.value[0] = chip->mute;
+ else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE)
+@@ -85,13 +98,10 @@
+ changed = 1;
+ }
+ if (changed
+- || (ucontrol->value.integer.value[0] != chip->volume)) {
+- int atten;
++ || (ucontrol->value.integer.value[0] != chip2alsa(chip->volume))) {
+
+- chip->volume = ucontrol->value.integer.value[0];
++ chip->volume = alsa2chip(ucontrol->value.integer.value[0]);
+ changed = 1;
+- atten = -((chip->volume << 8) / 100);
+- chip->volume = atten;
+ }
+
+ } else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) {
--- /dev/null
+diff -Naur linux-3.2.19.org/sound/arm/bcm2835-ctl.c linux-3.2.19/sound/arm/bcm2835-ctl.c
+--- linux-3.2.19.org/sound/arm/bcm2835-ctl.c 2012-06-04 22:38:54.000000000 +0200
++++ linux-3.2.19/sound/arm/bcm2835-ctl.c 2012-06-05 22:37:46.343725845 +0200
+@@ -53,7 +53,7 @@
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = -10240;
+- uinfo->value.integer.max = 2303;
++ uinfo->value.integer.max = 400; /* 2303 */
+ } else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) {
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
--- /dev/null
+diff -uNr linux-3.2/drivers/net/imq.c linux-3.2-imq/drivers/net/imq.c
+--- linux-3.2/drivers/net/imq.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-3.2-imq/drivers/net/imq.c 2011-11-04 12:16:10.454992642 +0200
+@@ -0,0 +1,850 @@
++/*
++ * Pseudo-driver for the intermediate queue device.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ *
++ * Authors: Patrick McHardy, <kaber@trash.net>
++ *
++ * The first version was written by Martin Devera, <devik@cdi.cz>
++ *
++ * Credits: Jan Rafaj <imq2t@cedric.vabo.cz>
++ * - Update patch to 2.4.21
++ * Sebastian Strollo <sstrollo@nortelnetworks.com>
++ * - Fix "Dead-loop on netdevice imq"-issue
++ * Marcel Sebek <sebek64@post.cz>
++ * - Update to 2.6.2-rc1
++ *
++ * After some time of inactivity there is a group taking care
++ * of IMQ again: http://www.linuximq.net
++ *
++ *
++ * 2004/06/30 - New version of IMQ patch to kernels <=2.6.7
++ * including the following changes:
++ *
++ * - Correction of ipv6 support "+"s issue (Hasso Tepper)
++ * - Correction of imq_init_devs() issue that resulted in
++ * kernel OOPS unloading IMQ as module (Norbert Buchmuller)
++ * - Addition of functionality to choose number of IMQ devices
++ * during kernel config (Andre Correa)
++ * - Addition of functionality to choose how IMQ hooks on
++ * PRE and POSTROUTING (after or before NAT) (Andre Correa)
++ * - Cosmetic corrections (Norbert Buchmuller) (Andre Correa)
++ *
++ *
++ * 2005/12/16 - IMQ versions between 2.6.7 and 2.6.13 were
++ * released with almost no problems. 2.6.14-x was released
++ * with some important changes: nfcache was removed; After
++ * some weeks of trouble we figured out that some IMQ fields
++ * in skb were missing in skbuff.c - skb_clone and copy_skb_header.
++ * These functions are correctly patched by this new patch version.
++ *
++ * Thanks for all who helped to figure out all the problems with
++ * 2.6.14.x: Patrick McHardy, Rune Kock, VeNoMouS, Max CtRiX,
++ * Kevin Shanahan, Richard Lucassen, Valery Dachev (hopefully
++ * I didn't forget anybody). I apologize again for my lack of time.
++ *
++ *
++ * 2008/06/17 - 2.6.25 - Changed imq.c to use qdisc_run() instead
++ * of qdisc_restart() and moved qdisc_run() to tasklet to avoid
++ * recursive locking. New initialization routines to fix 'rmmod' not
++ * working anymore. Used code from ifb.c. (Jussi Kivilinna)
++ *
++ * 2008/08/06 - 2.6.26 - (JK)
++ * - Replaced tasklet with 'netif_schedule()'.
++ * - Cleaned up and added comments for imq_nf_queue().
++ *
++ * 2009/04/12
++ * - Add skb_save_cb/skb_restore_cb helper functions for backuping
++ * control buffer. This is needed because qdisc-layer on kernels
++ * 2.6.27 and newer overwrite control buffer. (Jussi Kivilinna)
++ * - Add better locking for IMQ device. Hopefully this will solve
++ * SMP issues. (Jussi Kivilinna)
++ * - Port to 2.6.27
++ * - Port to 2.6.28
++ * - Port to 2.6.29 + fix rmmod not working
++ *
++ * 2009/04/20 - (Jussi Kivilinna)
++ * - Use netdevice feature flags to avoid extra packet handling
++ * by core networking layer and possibly increase performance.
++ *
++ * 2009/09/26 - (Jussi Kivilinna)
++ * - Add imq_nf_reinject_lockless to fix deadlock with
++ * imq_nf_queue/imq_nf_reinject.
++ *
++ * 2009/12/08 - (Jussi Kivilinna)
++ * - Port to 2.6.32
++ * - Add check for skb->nf_queue_entry==NULL in imq_dev_xmit()
++ * - Also add better error checking for skb->nf_queue_entry usage
++ *
++ * 2010/02/25 - (Jussi Kivilinna)
++ * - Port to 2.6.33
++ *
++ * 2010/08/15 - (Jussi Kivilinna)
++ * - Port to 2.6.35
++ * - Simplify hook registration by using nf_register_hooks.
++ * - nf_reinject doesn't need spinlock around it, therefore remove
++ * imq_nf_reinject function. Other nf_reinject users protect
++ * their own data with spinlock. With IMQ however all data is
++ * needed is stored per skbuff, so no locking is needed.
++ * - Changed IMQ to use 'separate' NF_IMQ_QUEUE instead of
++ * NF_QUEUE, this allows working coexistance of IMQ and other
++ * NF_QUEUE users.
++ * - Make IMQ multi-queue. Number of IMQ device queues can be
++ * increased with 'numqueues' module parameters. Default number
++ * of queues is 1, in other words by default IMQ works as
++ * single-queue device. Multi-queue selection is based on
++ * IFB multi-queue patch by Changli Gao <xiaosuo@gmail.com>.
++ *
++ * 2011/03/18 - (Jussi Kivilinna)
++ * - Port to 2.6.38
++ *
++ * 2011/07/12 - (syoder89@gmail.com)
++ * - Crash fix that happens when the receiving interface has more
++ * than one queue (add missing skb_set_queue_mapping in
++ * imq_select_queue).
++ *
++ * 2011/07/26 - (Jussi Kivilinna)
++ * - Add queue mapping checks for packets exiting IMQ.
++ * - Port to 3.0
++ *
++ * 2011/08/16 - (Jussi Kivilinna)
++ * - Clear IFF_TX_SKB_SHARING flag that was added for linux 3.0.2
++ *
++ * 2011/11/03 - Germano Michel <germanomichel@gmail.com>
++ * - Fix IMQ for net namespaces
++ *
++ * 2011/11/04 - Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
++ * - Port to 3.1
++ * - Clean-up, move 'get imq device pointer by imqX name' to
++ * separate function from imq_nf_queue().
++ *
++ * Also, many thanks to pablo Sebastian Greco for making the initial
++ * patch and to those who helped the testing.
++ *
++ * More info at: http://www.linuximq.net/ (Andre Correa)
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/moduleparam.h>
++#include <linux/list.h>
++#include <linux/skbuff.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/rtnetlink.h>
++#include <linux/if_arp.h>
++#include <linux/netfilter.h>
++#include <linux/netfilter_ipv4.h>
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++ #include <linux/netfilter_ipv6.h>
++#endif
++#include <linux/imq.h>
++#include <net/pkt_sched.h>
++#include <net/netfilter/nf_queue.h>
++#include <net/sock.h>
++#include <linux/ip.h>
++#include <linux/ipv6.h>
++#include <linux/if_vlan.h>
++#include <linux/if_pppox.h>
++#include <net/ip.h>
++#include <net/ipv6.h>
++
++static int imq_nf_queue(struct nf_queue_entry *entry, unsigned queue_num);
++
++static nf_hookfn imq_nf_hook;
++
++static struct nf_hook_ops imq_ops[] = {
++ {
++ /* imq_ingress_ipv4 */
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET,
++ .hooknum = NF_INET_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ .priority = NF_IP_PRI_MANGLE + 1,
++#else
++ .priority = NF_IP_PRI_NAT_DST + 1,
++#endif
++ },
++ {
++ /* imq_egress_ipv4 */
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET,
++ .hooknum = NF_INET_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++ .priority = NF_IP_PRI_LAST,
++#else
++ .priority = NF_IP_PRI_NAT_SRC - 1,
++#endif
++ },
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++ {
++ /* imq_ingress_ipv6 */
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET6,
++ .hooknum = NF_INET_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ .priority = NF_IP6_PRI_MANGLE + 1,
++#else
++ .priority = NF_IP6_PRI_NAT_DST + 1,
++#endif
++ },
++ {
++ /* imq_egress_ipv6 */
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET6,
++ .hooknum = NF_INET_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++ .priority = NF_IP6_PRI_LAST,
++#else
++ .priority = NF_IP6_PRI_NAT_SRC - 1,
++#endif
++ },
++#endif
++};
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++static int numdevs = CONFIG_IMQ_NUM_DEVS;
++#else
++static int numdevs = IMQ_MAX_DEVS;
++#endif
++
++static struct net_device *imq_devs_cache[IMQ_MAX_DEVS];
++
++#define IMQ_MAX_QUEUES 32
++static int numqueues = 1;
++static u32 imq_hashrnd;
++
++static inline __be16 pppoe_proto(const struct sk_buff *skb)
++{
++ return *((__be16 *)(skb_mac_header(skb) + ETH_HLEN +
++ sizeof(struct pppoe_hdr)));
++}
++
++static u16 imq_hash(struct net_device *dev, struct sk_buff *skb)
++{
++ unsigned int pull_len;
++ u16 protocol = skb->protocol;
++ u32 addr1, addr2;
++ u32 hash, ihl = 0;
++ union {
++ u16 in16[2];
++ u32 in32;
++ } ports;
++ u8 ip_proto;
++
++ pull_len = 0;
++
++recheck:
++ switch (protocol) {
++ case htons(ETH_P_8021Q): {
++ if (unlikely(skb_pull(skb, VLAN_HLEN) == NULL))
++ goto other;
++
++ pull_len += VLAN_HLEN;
++ skb->network_header += VLAN_HLEN;
++
++ protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
++ goto recheck;
++ }
++
++ case htons(ETH_P_PPP_SES): {
++ if (unlikely(skb_pull(skb, PPPOE_SES_HLEN) == NULL))
++ goto other;
++
++ pull_len += PPPOE_SES_HLEN;
++ skb->network_header += PPPOE_SES_HLEN;
++
++ protocol = pppoe_proto(skb);
++ goto recheck;
++ }
++
++ case htons(ETH_P_IP): {
++ const struct iphdr *iph = ip_hdr(skb);
++
++ if (unlikely(!pskb_may_pull(skb, sizeof(struct iphdr))))
++ goto other;
++
++ addr1 = iph->daddr;
++ addr2 = iph->saddr;
++
++ ip_proto = !(ip_hdr(skb)->frag_off & htons(IP_MF | IP_OFFSET)) ?
++ iph->protocol : 0;
++ ihl = ip_hdrlen(skb);
++
++ break;
++ }
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++ case htons(ETH_P_IPV6): {
++ const struct ipv6hdr *iph = ipv6_hdr(skb);
++
++ if (unlikely(!pskb_may_pull(skb, sizeof(struct ipv6hdr))))
++ goto other;
++
++ addr1 = iph->daddr.s6_addr32[3];
++ addr2 = iph->saddr.s6_addr32[3];
++ ihl = ipv6_skip_exthdr(skb, sizeof(struct ipv6hdr), &ip_proto);
++ if (unlikely(ihl < 0))
++ goto other;
++
++ break;
++ }
++#endif
++ default:
++other:
++ if (pull_len != 0) {
++ skb_push(skb, pull_len);
++ skb->network_header -= pull_len;
++ }
++
++ return (u16)(ntohs(protocol) % dev->real_num_tx_queues);
++ }
++
++ if (addr1 > addr2)
++ swap(addr1, addr2);
++
++ switch (ip_proto) {
++ case IPPROTO_TCP:
++ case IPPROTO_UDP:
++ case IPPROTO_DCCP:
++ case IPPROTO_ESP:
++ case IPPROTO_AH:
++ case IPPROTO_SCTP:
++ case IPPROTO_UDPLITE: {
++ if (likely(skb_copy_bits(skb, ihl, &ports.in32, 4) >= 0)) {
++ if (ports.in16[0] > ports.in16[1])
++ swap(ports.in16[0], ports.in16[1]);
++ break;
++ }
++ /* fall-through */
++ }
++ default:
++ ports.in32 = 0;
++ break;
++ }
++
++ if (pull_len != 0) {
++ skb_push(skb, pull_len);
++ skb->network_header -= pull_len;
++ }
++
++ hash = jhash_3words(addr1, addr2, ports.in32, imq_hashrnd ^ ip_proto);
++
++ return (u16)(((u64)hash * dev->real_num_tx_queues) >> 32);
++}
++
++static inline bool sk_tx_queue_recorded(struct sock *sk)
++{
++ return (sk_tx_queue_get(sk) >= 0);
++}
++
++static struct netdev_queue *imq_select_queue(struct net_device *dev,
++ struct sk_buff *skb)
++{
++ u16 queue_index = 0;
++ u32 hash;
++
++ if (likely(dev->real_num_tx_queues == 1))
++ goto out;
++
++ /* IMQ can be receiving ingress or engress packets. */
++
++ /* Check first for if rx_queue is set */
++ if (skb_rx_queue_recorded(skb)) {
++ queue_index = skb_get_rx_queue(skb);
++ goto out;
++ }
++
++ /* Check if socket has tx_queue set */
++ if (sk_tx_queue_recorded(skb->sk)) {
++ queue_index = sk_tx_queue_get(skb->sk);
++ goto out;
++ }
++
++ /* Try use socket hash */
++ if (skb->sk && skb->sk->sk_hash) {
++ hash = skb->sk->sk_hash;
++ queue_index =
++ (u16)(((u64)hash * dev->real_num_tx_queues) >> 32);
++ goto out;
++ }
++
++ /* Generate hash from packet data */
++ queue_index = imq_hash(dev, skb);
++
++out:
++ if (unlikely(queue_index >= dev->real_num_tx_queues))
++ queue_index = (u16)((u32)queue_index % dev->real_num_tx_queues);
++
++ skb_set_queue_mapping(skb, queue_index);
++ return netdev_get_tx_queue(dev, queue_index);
++}
++
++static struct net_device_stats *imq_get_stats(struct net_device *dev)
++{
++ return &dev->stats;
++}
++
++/* called for packets kfree'd in qdiscs at places other than enqueue */
++static void imq_skb_destructor(struct sk_buff *skb)
++{
++ struct nf_queue_entry *entry = skb->nf_queue_entry;
++
++ skb->nf_queue_entry = NULL;
++
++ if (entry) {
++ nf_queue_entry_release_refs(entry);
++ kfree(entry);
++ }
++
++ skb_restore_cb(skb); /* kfree backup */
++}
++
++static void imq_done_check_queue_mapping(struct sk_buff *skb,
++ struct net_device *dev)
++{
++ unsigned int queue_index;
++
++ /* Don't let queue_mapping be left too large after exiting IMQ */
++ if (likely(skb->dev != dev && skb->dev != NULL)) {
++ queue_index = skb_get_queue_mapping(skb);
++ if (unlikely(queue_index >= skb->dev->real_num_tx_queues)) {
++ queue_index = (u16)((u32)queue_index %
++ skb->dev->real_num_tx_queues);
++ skb_set_queue_mapping(skb, queue_index);
++ }
++ } else {
++ /* skb->dev was IMQ device itself or NULL, be on safe side and
++ * just clear queue mapping.
++ */
++ skb_set_queue_mapping(skb, 0);
++ }
++}
++
++static netdev_tx_t imq_dev_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ struct nf_queue_entry *entry = skb->nf_queue_entry;
++
++ skb->nf_queue_entry = NULL;
++ dev->trans_start = jiffies;
++
++ dev->stats.tx_bytes += skb->len;
++ dev->stats.tx_packets++;
++
++ if (unlikely(entry == NULL)) {
++ /* We don't know what is going on here.. packet is queued for
++ * imq device, but (probably) not by us.
++ *
++ * If this packet was not send here by imq_nf_queue(), then
++ * skb_save_cb() was not used and skb_free() should not show:
++ * WARNING: IMQ: kfree_skb: skb->cb_next:..
++ * and/or
++ * WARNING: IMQ: kfree_skb: skb->nf_queue_entry...
++ *
++ * However if this message is shown, then IMQ is somehow broken
++ * and you should report this to linuximq.net.
++ */
++
++ /* imq_dev_xmit is black hole that eats all packets, report that
++ * we eat this packet happily and increase dropped counters.
++ */
++
++ dev->stats.tx_dropped++;
++ dev_kfree_skb(skb);
++
++ return NETDEV_TX_OK;
++ }
++
++ skb_restore_cb(skb); /* restore skb->cb */
++
++ skb->imq_flags = 0;
++ skb->destructor = NULL;
++
++ imq_done_check_queue_mapping(skb, dev);
++
++ nf_reinject(entry, NF_ACCEPT);
++
++ return NETDEV_TX_OK;
++}
++
++static struct net_device *get_imq_device_by_index(int index)
++{
++ struct net_device *dev = NULL;
++ struct net *net;
++ char buf[8];
++
++ /* get device by name and cache result */
++ snprintf(buf, sizeof(buf), "imq%d", index);
++
++ /* Search device from all namespaces. */
++ for_each_net(net) {
++ dev = dev_get_by_name(net, buf);
++ if (dev)
++ break;
++ }
++
++ if (WARN_ON_ONCE(dev == NULL)) {
++ /* IMQ device not found. Exotic config? */
++ return ERR_PTR(-ENODEV);
++ }
++
++ imq_devs_cache[index] = dev;
++ dev_put(dev);
++
++ return dev;
++}
++
++static int imq_nf_queue(struct nf_queue_entry *entry, unsigned queue_num)
++{
++ struct net_device *dev;
++ struct sk_buff *skb_orig, *skb, *skb_shared;
++ struct Qdisc *q;
++ struct netdev_queue *txq;
++ spinlock_t *root_lock;
++ int users, index;
++ int retval = -EINVAL;
++ unsigned int orig_queue_index;
++
++ index = entry->skb->imq_flags & IMQ_F_IFMASK;
++ if (unlikely(index > numdevs - 1)) {
++ if (net_ratelimit())
++ printk(KERN_WARNING
++ "IMQ: invalid device specified, highest is %u\n",
++ numdevs - 1);
++ retval = -EINVAL;
++ goto out;
++ }
++
++ /* check for imq device by index from cache */
++ dev = imq_devs_cache[index];
++ if (unlikely(!dev)) {
++ dev = get_imq_device_by_index(index);
++ if (IS_ERR(dev)) {
++ retval = PTR_ERR(dev);
++ goto out;
++ }
++ }
++
++ if (unlikely(!(dev->flags & IFF_UP))) {
++ entry->skb->imq_flags = 0;
++ nf_reinject(entry, NF_ACCEPT);
++ retval = 0;
++ goto out;
++ }
++ dev->last_rx = jiffies;
++
++ skb = entry->skb;
++ skb_orig = NULL;
++
++ /* skb has owner? => make clone */
++ if (unlikely(skb->destructor)) {
++ skb_orig = skb;
++ skb = skb_clone(skb, GFP_ATOMIC);
++ if (unlikely(!skb)) {
++ retval = -ENOMEM;
++ goto out;
++ }
++ entry->skb = skb;
++ }
++
++ skb->nf_queue_entry = entry;
++
++ dev->stats.rx_bytes += skb->len;
++ dev->stats.rx_packets++;
++
++ if (!skb->dev) {
++ /* skb->dev == NULL causes problems, try the find cause. */
++ if (net_ratelimit()) {
++ dev_warn(&dev->dev,
++ "received packet with skb->dev == NULL\n");
++ dump_stack();
++ }
++
++ skb->dev = dev;
++ }
++
++ /* Disables softirqs for lock below */
++ rcu_read_lock_bh();
++
++ /* Multi-queue selection */
++ orig_queue_index = skb_get_queue_mapping(skb);
++ txq = imq_select_queue(dev, skb);
++
++ q = rcu_dereference(txq->qdisc);
++ if (unlikely(!q->enqueue))
++ goto packet_not_eaten_by_imq_dev;
++
++ root_lock = qdisc_lock(q);
++ spin_lock(root_lock);
++
++ users = atomic_read(&skb->users);
++
++ skb_shared = skb_get(skb); /* increase reference count by one */
++ skb_save_cb(skb_shared); /* backup skb->cb, as qdisc layer will
++ overwrite it */
++ qdisc_enqueue_root(skb_shared, q); /* might kfree_skb */
++
++ if (likely(atomic_read(&skb_shared->users) == users + 1)) {
++ kfree_skb(skb_shared); /* decrease reference count by one */
++
++ skb->destructor = &imq_skb_destructor;
++
++ /* cloned? */
++ if (unlikely(skb_orig))
++ kfree_skb(skb_orig); /* free original */
++
++ spin_unlock(root_lock);
++ rcu_read_unlock_bh();
++
++ /* schedule qdisc dequeue */
++ __netif_schedule(q);
++
++ retval = 0;
++ goto out;
++ } else {
++ skb_restore_cb(skb_shared); /* restore skb->cb */
++ skb->nf_queue_entry = NULL;
++ /* qdisc dropped packet and decreased skb reference count of
++ * skb, so we don't really want to and try refree as that would
++ * actually destroy the skb. */
++ spin_unlock(root_lock);
++ goto packet_not_eaten_by_imq_dev;
++ }
++
++packet_not_eaten_by_imq_dev:
++ skb_set_queue_mapping(skb, orig_queue_index);
++ rcu_read_unlock_bh();
++
++ /* cloned? restore original */
++ if (unlikely(skb_orig)) {
++ kfree_skb(skb);
++ entry->skb = skb_orig;
++ }
++ retval = -1;
++out:
++ return retval;
++}
++
++static unsigned int imq_nf_hook(unsigned int hook, struct sk_buff *pskb,
++ const struct net_device *indev,
++ const struct net_device *outdev,
++ int (*okfn)(struct sk_buff *))
++{
++ return (pskb->imq_flags & IMQ_F_ENQUEUE) ? NF_IMQ_QUEUE : NF_ACCEPT;
++}
++
++static int imq_close(struct net_device *dev)
++{
++ netif_stop_queue(dev);
++ return 0;
++}
++
++static int imq_open(struct net_device *dev)
++{
++ netif_start_queue(dev);
++ return 0;
++}
++
++static const struct net_device_ops imq_netdev_ops = {
++ .ndo_open = imq_open,
++ .ndo_stop = imq_close,
++ .ndo_start_xmit = imq_dev_xmit,
++ .ndo_get_stats = imq_get_stats,
++};
++
++static void imq_setup(struct net_device *dev)
++{
++ dev->netdev_ops = &imq_netdev_ops;
++ dev->type = ARPHRD_VOID;
++ dev->mtu = 16000; /* too small? */
++ dev->tx_queue_len = 11000; /* too big? */
++ dev->flags = IFF_NOARP;
++ dev->features = NETIF_F_SG | NETIF_F_FRAGLIST |
++ NETIF_F_GSO | NETIF_F_HW_CSUM |
++ NETIF_F_HIGHDMA;
++ dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE |
++ IFF_TX_SKB_SHARING);
++}
++
++static int imq_validate(struct nlattr *tb[], struct nlattr *data[])
++{
++ int ret = 0;
++
++ if (tb[IFLA_ADDRESS]) {
++ if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN) {
++ ret = -EINVAL;
++ goto end;
++ }
++ if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS]))) {
++ ret = -EADDRNOTAVAIL;
++ goto end;
++ }
++ }
++ return 0;
++end:
++ printk(KERN_WARNING "IMQ: imq_validate failed (%d)\n", ret);
++ return ret;
++}
++
++static struct rtnl_link_ops imq_link_ops __read_mostly = {
++ .kind = "imq",
++ .priv_size = 0,
++ .setup = imq_setup,
++ .validate = imq_validate,
++};
++
++static const struct nf_queue_handler imq_nfqh = {
++ .name = "imq",
++ .outfn = imq_nf_queue,
++};
++
++static int __init imq_init_hooks(void)
++{
++ int ret;
++
++ nf_register_queue_imq_handler(&imq_nfqh);
++
++ ret = nf_register_hooks(imq_ops, ARRAY_SIZE(imq_ops));
++ if (ret < 0)
++ nf_unregister_queue_imq_handler();
++
++ return ret;
++}
++
++static int __init imq_init_one(int index)
++{
++ struct net_device *dev;
++ int ret;
++
++ dev = alloc_netdev_mq(0, "imq%d", imq_setup, numqueues);
++ if (!dev)
++ return -ENOMEM;
++
++ ret = dev_alloc_name(dev, dev->name);
++ if (ret < 0)
++ goto fail;
++
++ dev->rtnl_link_ops = &imq_link_ops;
++ ret = register_netdevice(dev);
++ if (ret < 0)
++ goto fail;
++
++ return 0;
++fail:
++ free_netdev(dev);
++ return ret;
++}
++
++static int __init imq_init_devs(void)
++{
++ int err, i;
++
++ if (numdevs < 1 || numdevs > IMQ_MAX_DEVS) {
++ printk(KERN_ERR "IMQ: numdevs has to be betweed 1 and %u\n",
++ IMQ_MAX_DEVS);
++ return -EINVAL;
++ }
++
++ if (numqueues < 1 || numqueues > IMQ_MAX_QUEUES) {
++ printk(KERN_ERR "IMQ: numqueues has to be betweed 1 and %u\n",
++ IMQ_MAX_QUEUES);
++ return -EINVAL;
++ }
++
++ get_random_bytes(&imq_hashrnd, sizeof(imq_hashrnd));
++
++ rtnl_lock();
++ err = __rtnl_link_register(&imq_link_ops);
++
++ for (i = 0; i < numdevs && !err; i++)
++ err = imq_init_one(i);
++
++ if (err) {
++ __rtnl_link_unregister(&imq_link_ops);
++ memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++ }
++ rtnl_unlock();
++
++ return err;
++}
++
++static int __init imq_init_module(void)
++{
++ int err;
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++ BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS > 16);
++ BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS < 2);
++ BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS - 1 > IMQ_F_IFMASK);
++#endif
++
++ err = imq_init_devs();
++ if (err) {
++ printk(KERN_ERR "IMQ: Error trying imq_init_devs(net)\n");
++ return err;
++ }
++
++ err = imq_init_hooks();
++ if (err) {
++ printk(KERN_ERR "IMQ: Error trying imq_init_hooks()\n");
++ rtnl_link_unregister(&imq_link_ops);
++ memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++ return err;
++ }
++
++ printk(KERN_INFO "IMQ driver loaded successfully. "
++ "(numdevs = %d, numqueues = %d)\n", numdevs, numqueues);
++
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ printk(KERN_INFO "\tHooking IMQ before NAT on PREROUTING.\n");
++#else
++ printk(KERN_INFO "\tHooking IMQ after NAT on PREROUTING.\n");
++#endif
++#if defined(CONFIG_IMQ_BEHAVIOR_AB) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ printk(KERN_INFO "\tHooking IMQ before NAT on POSTROUTING.\n");
++#else
++ printk(KERN_INFO "\tHooking IMQ after NAT on POSTROUTING.\n");
++#endif
++
++ return 0;
++}
++
++static void __exit imq_unhook(void)
++{
++ nf_unregister_hooks(imq_ops, ARRAY_SIZE(imq_ops));
++ nf_unregister_queue_imq_handler();
++}
++
++static void __exit imq_cleanup_devs(void)
++{
++ rtnl_link_unregister(&imq_link_ops);
++ memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++}
++
++static void __exit imq_exit_module(void)
++{
++ imq_unhook();
++ imq_cleanup_devs();
++ printk(KERN_INFO "IMQ driver unloaded successfully.\n");
++}
++
++module_init(imq_init_module);
++module_exit(imq_exit_module);
++
++module_param(numdevs, int, 0);
++module_param(numqueues, int, 0);
++MODULE_PARM_DESC(numdevs, "number of IMQ devices (how many imq* devices will "
++ "be created)");
++MODULE_PARM_DESC(numqueues, "number of queues per IMQ device");
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See "
++ "http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_RTNL_LINK("imq");
++
+diff -uNr linux-3.2/drivers/net/Kconfig linux-3.2-imq/drivers/net/Kconfig
+--- linux-3.2/drivers/net/Kconfig 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.2-imq/drivers/net/Kconfig 2011-11-04 11:12:52.106390309 +0200
+@@ -90,6 +90,125 @@
+ To compile this driver as a module, choose M here: the module
+ will be called eql. If unsure, say N.
+
++config IMQ
++ tristate "IMQ (intermediate queueing device) support"
++ depends on NETDEVICES && NETFILTER
++ ---help---
++ The IMQ device(s) is used as placeholder for QoS queueing
++ disciplines. Every packet entering/leaving the IP stack can be
++ directed through the IMQ device where it's enqueued/dequeued to the
++ attached qdisc. This allows you to treat network devices as classes
++ and distribute bandwidth among them. Iptables is used to specify
++ through which IMQ device, if any, packets travel.
++
++ More information at: http://www.linuximq.net/
++
++ To compile this driver as a module, choose M here: the module
++ will be called imq. If unsure, say N.
++
++choice
++ prompt "IMQ behavior (PRE/POSTROUTING)"
++ depends on IMQ
++ default IMQ_BEHAVIOR_AB
++ help
++ This setting defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ IMQ can work in any of the following ways:
++
++ PREROUTING | POSTROUTING
++ -----------------|-------------------
++ #1 After NAT | After NAT
++ #2 After NAT | Before NAT
++ #3 Before NAT | After NAT
++ #4 Before NAT | Before NAT
++
++ The default behavior is to hook before NAT on PREROUTING
++ and after NAT on POSTROUTING (#3).
++
++ This settings are specially usefull when trying to use IMQ
++ to shape NATed clients.
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AA
++ bool "IMQ AA"
++ help
++ This setting defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: After NAT
++ POSTROUTING: After NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AB
++ bool "IMQ AB"
++ help
++ This setting defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: After NAT
++ POSTROUTING: Before NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BA
++ bool "IMQ BA"
++ help
++ This setting defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: Before NAT
++ POSTROUTING: After NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BB
++ bool "IMQ BB"
++ help
++ This setting defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: Before NAT
++ POSTROUTING: Before NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++endchoice
++
++config IMQ_NUM_DEVS
++ int "Number of IMQ devices"
++ range 2 16
++ depends on IMQ
++ default "16"
++ help
++ This setting defines how many IMQ devices will be created.
++
++ The default value is 16.
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
+ config NET_FC
+ bool "Fibre Channel driver support"
+ depends on SCSI && PCI
+diff -uNr linux-3.2/drivers/net/Makefile linux-3.2-imq/drivers/net/Makefile
+--- linux-3.2/drivers/net/Makefile 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.2-imq/drivers/net/Makefile 2011-11-04 11:12:52.106390309 +0200
+@@ -8,6 +8,7 @@
+ obj-$(CONFIG_BONDING) += bonding/
+ obj-$(CONFIG_DUMMY) += dummy.o
+ obj-$(CONFIG_EQUALIZER) += eql.o
++obj-$(CONFIG_IMQ) += imq.o
+ obj-$(CONFIG_IFB) += ifb.o
+ obj-$(CONFIG_MACVLAN) += macvlan.o
+ obj-$(CONFIG_MACVTAP) += macvtap.o
+diff -uNr linux-3.2/include/linux/imq.h linux-3.2-imq/include/linux/imq.h
+--- linux-3.2/include/linux/imq.h 1970-01-01 02:00:00.000000000 +0200
++++ linux-3.2-imq/include/linux/imq.h 2011-11-04 11:12:52.109723710 +0200
+@@ -0,0 +1,13 @@
++#ifndef _IMQ_H
++#define _IMQ_H
++
++/* IFMASK (16 device indexes, 0 to 15) and flag(s) fit in 5 bits */
++#define IMQ_F_BITS 5
++
++#define IMQ_F_IFMASK 0x0f
++#define IMQ_F_ENQUEUE 0x10
++
++#define IMQ_MAX_DEVS (IMQ_F_IFMASK + 1)
++
++#endif /* _IMQ_H */
++
+diff -uNr linux-3.2/include/linux/netfilter/xt_IMQ.h linux-3.2-imq/include/linux/netfilter/xt_IMQ.h
+--- linux-3.2/include/linux/netfilter/xt_IMQ.h 1970-01-01 02:00:00.000000000 +0200
++++ linux-3.2-imq/include/linux/netfilter/xt_IMQ.h 2011-11-04 11:12:52.109723710 +0200
+@@ -0,0 +1,9 @@
++#ifndef _XT_IMQ_H
++#define _XT_IMQ_H
++
++struct xt_imq_info {
++ unsigned int todev; /* target imq device */
++};
++
++#endif /* _XT_IMQ_H */
++
+diff -uNr linux-3.2/include/linux/netfilter.h linux-3.2-imq/include/linux/netfilter.h
+--- linux-3.2/include/linux/netfilter.h 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.2-imq/include/linux/netfilter.h 2011-11-04 11:12:52.109723710 +0200
+@@ -22,7 +22,8 @@
+ #define NF_QUEUE 3
+ #define NF_REPEAT 4
+ #define NF_STOP 5
+-#define NF_MAX_VERDICT NF_STOP
++#define NF_IMQ_QUEUE 6
++#define NF_MAX_VERDICT NF_IMQ_QUEUE
+
+ /* we overload the higher bits for encoding auxiliary data such as the queue
+ * number or errno values. Not nice, but better than additional function
+diff -uNr linux-3.2/include/linux/netfilter_ipv4/ipt_IMQ.h linux-3.2-imq/include/linux/netfilter_ipv4/ipt_IMQ.h
+--- linux-3.2/include/linux/netfilter_ipv4/ipt_IMQ.h 1970-01-01 02:00:00.000000000 +0200
++++ linux-3.2-imq/include/linux/netfilter_ipv4/ipt_IMQ.h 2011-11-04 11:12:52.109723710 +0200
+@@ -0,0 +1,10 @@
++#ifndef _IPT_IMQ_H
++#define _IPT_IMQ_H
++
++/* Backwards compatibility for old userspace */
++#include <linux/netfilter/xt_IMQ.h>
++
++#define ipt_imq_info xt_imq_info
++
++#endif /* _IPT_IMQ_H */
++
+diff -uNr linux-3.2/include/linux/netfilter_ipv6/ip6t_IMQ.h linux-3.2-imq/include/linux/netfilter_ipv6/ip6t_IMQ.h
+--- linux-3.2/include/linux/netfilter_ipv6/ip6t_IMQ.h 1970-01-01 02:00:00.000000000 +0200
++++ linux-3.2-imq/include/linux/netfilter_ipv6/ip6t_IMQ.h 2011-11-04 11:12:52.113057113 +0200
+@@ -0,0 +1,10 @@
++#ifndef _IP6T_IMQ_H
++#define _IP6T_IMQ_H
++
++/* Backwards compatibility for old userspace */
++#include <linux/netfilter/xt_IMQ.h>
++
++#define ip6t_imq_info xt_imq_info
++
++#endif /* _IP6T_IMQ_H */
++
+diff -uNr linux-3.2/include/linux/skbuff.h linux-3.2-imq/include/linux/skbuff.h
+--- linux-3.2/include/linux/skbuff.h 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.2-imq/include/linux/skbuff.h 2011-11-04 11:12:52.116390515 +0200
+@@ -30,6 +30,9 @@
+ #include <linux/dmaengine.h>
+ #include <linux/hrtimer.h>
+ #include <linux/dma-mapping.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+
+ /* Don't change this without changing skb_csum_unnecessary! */
+ #define CHECKSUM_NONE 0
+@@ -386,6 +389,9 @@
+ * first. This is owned by whoever has the skb queued ATM.
+ */
+ char cb[48] __aligned(8);
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ void *cb_next;
++#endif
+
+ unsigned long _skb_refdst;
+ #ifdef CONFIG_XFRM
+@@ -424,6 +430,9 @@
+ #ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
+ struct sk_buff *nfct_reasm;
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ struct nf_queue_entry *nf_queue_entry;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ struct nf_bridge_info *nf_bridge;
+ #endif
+@@ -449,6 +458,10 @@
+
+ /* 0/13 bit hole */
+
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ __u8 imq_flags:IMQ_F_BITS;
++#endif
++
+ #ifdef CONFIG_NET_DMA
+ dma_cookie_t dma_cookie;
+ #endif
+@@ -535,6 +548,12 @@
+ return (struct rtable *)skb_dst(skb);
+ }
+
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++extern int skb_save_cb(struct sk_buff *skb);
++extern int skb_restore_cb(struct sk_buff *skb);
++#endif
++
+ extern void kfree_skb(struct sk_buff *skb);
+ extern void consume_skb(struct sk_buff *skb);
+ extern void __kfree_skb(struct sk_buff *skb);
+@@ -2368,6 +2387,10 @@
+ dst->nfct_reasm = src->nfct_reasm;
+ nf_conntrack_get_reasm(src->nfct_reasm);
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ dst->imq_flags = src->imq_flags;
++ dst->nf_queue_entry = src->nf_queue_entry;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ dst->nf_bridge = src->nf_bridge;
+ nf_bridge_get(src->nf_bridge);
+diff -uNr linux-3.2/include/net/netfilter/nf_queue.h linux-3.2-imq/include/net/netfilter/nf_queue.h
+--- linux-3.2/include/net/netfilter/nf_queue.h 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.2-imq/include/net/netfilter/nf_queue.h 2011-11-04 11:12:52.116390515 +0200
+@@ -30,5 +30,11 @@
+ const struct nf_queue_handler *qh);
+ extern void nf_unregister_queue_handlers(const struct nf_queue_handler *qh);
+ extern void nf_reinject(struct nf_queue_entry *entry, unsigned int verdict);
++extern void nf_queue_entry_release_refs(struct nf_queue_entry *entry);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++extern void nf_register_queue_imq_handler(const struct nf_queue_handler *qh);
++extern void nf_unregister_queue_imq_handler(void);
++#endif
+
+ #endif /* _NF_QUEUE_H */
+diff -uNr linux-3.2/net/core/dev.c linux-3.2-imq/net/core/dev.c
+--- linux-3.2/net/core/dev.c 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.2-imq/net/core/dev.c 2011-11-04 11:12:52.119723915 +0200
+@@ -98,6 +98,9 @@
+ #include <net/net_namespace.h>
+ #include <net/sock.h>
+ #include <linux/rtnetlink.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+ #include <linux/proc_fs.h>
+ #include <linux/seq_file.h>
+ #include <linux/stat.h>
+@@ -2185,7 +2188,12 @@
+ if (dev->priv_flags & IFF_XMIT_DST_RELEASE)
+ skb_dst_drop(skb);
+
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ if (!list_empty(&ptype_all) &&
++ !(skb->imq_flags & IMQ_F_ENQUEUE))
++#else
+ if (!list_empty(&ptype_all))
++#endif
+ dev_queue_xmit_nit(skb, dev);
+
+ skb_orphan_try(skb);
+diff -uNr linux-3.2/net/core/skbuff.c linux-3.2-imq/net/core/skbuff.c
+--- linux-3.2/net/core/skbuff.c 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.2-imq/net/core/skbuff.c 2011-11-04 11:12:52.123057315 +0200
+@@ -73,6 +73,9 @@
+
+ static struct kmem_cache *skbuff_head_cache __read_mostly;
+ static struct kmem_cache *skbuff_fclone_cache __read_mostly;
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++static struct kmem_cache *skbuff_cb_store_cache __read_mostly;
++#endif
+
+ static void sock_pipe_buf_release(struct pipe_inode_info *pipe,
+ struct pipe_buffer *buf)
+@@ -92,6 +95,82 @@
+ return 1;
+ }
+
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++/* Control buffer save/restore for IMQ devices */
++struct skb_cb_table {
++ char cb[48] __aligned(8);
++ void *cb_next;
++ atomic_t refcnt;
++};
++
++static DEFINE_SPINLOCK(skb_cb_store_lock);
++
++int skb_save_cb(struct sk_buff *skb)
++{
++ struct skb_cb_table *next;
++
++ next = kmem_cache_alloc(skbuff_cb_store_cache, GFP_ATOMIC);
++ if (!next)
++ return -ENOMEM;
++
++ BUILD_BUG_ON(sizeof(skb->cb) != sizeof(next->cb));
++
++ memcpy(next->cb, skb->cb, sizeof(skb->cb));
++ next->cb_next = skb->cb_next;
++
++ atomic_set(&next->refcnt, 1);
++
++ skb->cb_next = next;
++ return 0;
++}
++EXPORT_SYMBOL(skb_save_cb);
++
++int skb_restore_cb(struct sk_buff *skb)
++{
++ struct skb_cb_table *next;
++
++ if (!skb->cb_next)
++ return 0;
++
++ next = skb->cb_next;
++
++ BUILD_BUG_ON(sizeof(skb->cb) != sizeof(next->cb));
++
++ memcpy(skb->cb, next->cb, sizeof(skb->cb));
++ skb->cb_next = next->cb_next;
++
++ spin_lock(&skb_cb_store_lock);
++
++ if (atomic_dec_and_test(&next->refcnt))
++ kmem_cache_free(skbuff_cb_store_cache, next);
++
++ spin_unlock(&skb_cb_store_lock);
++
++ return 0;
++}
++EXPORT_SYMBOL(skb_restore_cb);
++
++static void skb_copy_stored_cb(struct sk_buff *new, const struct sk_buff *__old)
++{
++ struct skb_cb_table *next;
++ struct sk_buff *old;
++
++ if (!__old->cb_next) {
++ new->cb_next = NULL;
++ return;
++ }
++
++ spin_lock(&skb_cb_store_lock);
++
++ old = (struct sk_buff *)__old;
++
++ next = old->cb_next;
++ atomic_inc(&next->refcnt);
++ new->cb_next = next;
++
++ spin_unlock(&skb_cb_store_lock);
++}
++#endif
+
+ /* Pipe buffer operations for a socket. */
+ static const struct pipe_buf_operations sock_pipe_buf_ops = {
+@@ -403,6 +482,26 @@
+ WARN_ON(in_irq());
+ skb->destructor(skb);
+ }
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ /* This should not happen. When it does, avoid memleak by restoring
++ the chain of cb-backups. */
++ while (skb->cb_next != NULL) {
++ if (net_ratelimit())
++ printk(KERN_WARNING "IMQ: kfree_skb: skb->cb_next: "
++ "%08x\n", (unsigned int)skb->cb_next);
++
++ skb_restore_cb(skb);
++ }
++ /* This should not happen either, nf_queue_entry is nullified in
++ * imq_dev_xmit(). If we have non-NULL nf_queue_entry then we are
++ * leaking entry pointers, maybe memory. We don't know if this is
++ * pointer to already freed memory, or should this be freed.
++ * If this happens we need to add refcounting, etc for nf_queue_entry.
++ */
++ if (skb->nf_queue_entry && net_ratelimit())
++ printk(KERN_WARNING
++ "IMQ: kfree_skb: skb->nf_queue_entry != NULL");
++#endif
+ #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+ nf_conntrack_put(skb->nfct);
+ #endif
+@@ -547,6 +646,9 @@
+ new->sp = secpath_get(old->sp);
+ #endif
+ memcpy(new->cb, old->cb, sizeof(old->cb));
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ skb_copy_stored_cb(new, old);
++#endif
+ new->csum = old->csum;
+ new->local_df = old->local_df;
+ new->pkt_type = old->pkt_type;
+@@ -2907,6 +3009,13 @@
+ 0,
+ SLAB_HWCACHE_ALIGN|SLAB_PANIC,
+ NULL);
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ skbuff_cb_store_cache = kmem_cache_create("skbuff_cb_store_cache",
++ sizeof(struct skb_cb_table),
++ 0,
++ SLAB_HWCACHE_ALIGN|SLAB_PANIC,
++ NULL);
++#endif
+ }
+
+ /**
+diff -uNr linux-3.2/net/ipv6/ip6_output.c linux-3.2-imq/net/ipv6/ip6_output.c
+--- linux-3.2/net/ipv6/ip6_output.c 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.2-imq/net/ipv6/ip6_output.c 2011-11-04 11:12:52.123057315 +0200
+@@ -102,9 +102,6 @@
+ struct net_device *dev = dst->dev;
+ struct neighbour *neigh;
+
+- skb->protocol = htons(ETH_P_IPV6);
+- skb->dev = dev;
+-
+ if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr)) {
+ struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));
+
+@@ -170,6 +167,11 @@
+ return 0;
+ }
+
++ /* IMQ-patch: moved setting skb->dev and skb->protocol from
++ * ip6_finish_output2 to fix crashing at netif_skb_features(). */
++ skb->protocol = htons(ETH_P_IPV6);
++ skb->dev = dev;
++
+ return NF_HOOK_COND(NFPROTO_IPV6, NF_INET_POST_ROUTING, skb, NULL, dev,
+ ip6_finish_output,
+ !(IP6CB(skb)->flags & IP6SKB_REROUTED));
+diff -uNr linux-3.2/net/netfilter/core.c linux-3.2-imq/net/netfilter/core.c
+--- linux-3.2/net/netfilter/core.c 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.2-imq/net/netfilter/core.c 2011-11-04 11:12:52.123057315 +0200
+@@ -179,9 +179,11 @@
+ ret = NF_DROP_GETERR(verdict);
+ if (ret == 0)
+ ret = -EPERM;
+- } else if ((verdict & NF_VERDICT_MASK) == NF_QUEUE) {
++ } else if ((verdict & NF_VERDICT_MASK) == NF_QUEUE ||
++ (verdict & NF_VERDICT_MASK) == NF_IMQ_QUEUE) {
+ int err = nf_queue(skb, elem, pf, hook, indev, outdev, okfn,
+- verdict >> NF_VERDICT_QBITS);
++ verdict >> NF_VERDICT_QBITS,
++ verdict & NF_VERDICT_MASK);
+ if (err < 0) {
+ if (err == -ECANCELED)
+ goto next_hook;
+diff -uNr linux-3.2/net/netfilter/Kconfig linux-3.2-imq/net/netfilter/Kconfig
+--- linux-3.2/net/netfilter/Kconfig 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.2-imq/net/netfilter/Kconfig 2011-11-04 11:12:52.123057315 +0200
+@@ -506,6 +506,18 @@
+ For more information on the LEDs available on your system, see
+ Documentation/leds/leds-class.txt
+
++config NETFILTER_XT_TARGET_IMQ
++ tristate '"IMQ" target support'
++ depends on NETFILTER_XTABLES
++ depends on IP_NF_MANGLE || IP6_NF_MANGLE
++ select IMQ
++ default m if NETFILTER_ADVANCED=n
++ help
++ This option adds a `IMQ' target which is used to specify if and
++ to which imq device packets should get enqueued/dequeued.
++
++ To compile it as a module, choose M here. If unsure, say N.
++
+ config NETFILTER_XT_TARGET_MARK
+ tristate '"MARK" target support'
+ depends on NETFILTER_ADVANCED
+diff -uNr linux-3.2/net/netfilter/Makefile linux-3.2-imq/net/netfilter/Makefile
+--- linux-3.2/net/netfilter/Makefile 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.2-imq/net/netfilter/Makefile 2011-11-04 11:12:52.123057315 +0200
+@@ -56,6 +56,7 @@
+ obj-$(CONFIG_NETFILTER_XT_TARGET_CT) += xt_CT.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_HL) += xt_HL.o
++obj-$(CONFIG_NETFILTER_XT_TARGET_IMQ) += xt_IMQ.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_LED) += xt_LED.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_NFLOG) += xt_NFLOG.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_NFQUEUE) += xt_NFQUEUE.o
+diff -uNr linux-3.2/net/netfilter/nf_internals.h linux-3.2-imq/net/netfilter/nf_internals.h
+--- linux-3.2/net/netfilter/nf_internals.h 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.2-imq/net/netfilter/nf_internals.h 2011-11-04 11:12:52.123057315 +0200
+@@ -29,7 +29,7 @@
+ struct net_device *indev,
+ struct net_device *outdev,
+ int (*okfn)(struct sk_buff *),
+- unsigned int queuenum);
++ unsigned int queuenum, unsigned int queuetype);
+ extern int __init netfilter_queue_init(void);
+
+ /* nf_log.c */
+diff -uNr linux-3.2/net/netfilter/nf_queue.c linux-3.2-imq/net/netfilter/nf_queue.c
+--- linux-3.2/net/netfilter/nf_queue.c 2011-10-24 10:10:05.000000000 +0300
++++ linux-3.2-imq/net/netfilter/nf_queue.c 2011-11-04 11:12:52.123057315 +0200
+@@ -22,6 +22,26 @@
+
+ static DEFINE_MUTEX(queue_handler_mutex);
+
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++static const struct nf_queue_handler *queue_imq_handler;
++
++void nf_register_queue_imq_handler(const struct nf_queue_handler *qh)
++{
++ mutex_lock(&queue_handler_mutex);
++ rcu_assign_pointer(queue_imq_handler, qh);
++ mutex_unlock(&queue_handler_mutex);
++}
++EXPORT_SYMBOL_GPL(nf_register_queue_imq_handler);
++
++void nf_unregister_queue_imq_handler(void)
++{
++ mutex_lock(&queue_handler_mutex);
++ rcu_assign_pointer(queue_imq_handler, NULL);
++ mutex_unlock(&queue_handler_mutex);
++}
++EXPORT_SYMBOL_GPL(nf_unregister_queue_imq_handler);
++#endif
++
+ /* return EBUSY when somebody else is registered, return EEXIST if the
+ * same handler is registered, return 0 in case of success. */
+ int nf_register_queue_handler(u_int8_t pf, const struct nf_queue_handler *qh)
+@@ -92,7 +112,7 @@
+ }
+ EXPORT_SYMBOL_GPL(nf_unregister_queue_handlers);
+
+-static void nf_queue_entry_release_refs(struct nf_queue_entry *entry)
++void nf_queue_entry_release_refs(struct nf_queue_entry *entry)
+ {
+ /* Release those devices we held, or Alexey will kill me. */
+ if (entry->indev)
+@@ -112,6 +132,7 @@
+ /* Drop reference to owner of hook which queued us. */
+ module_put(entry->elem->owner);
+ }
++EXPORT_SYMBOL_GPL(nf_queue_entry_release_refs);
+
+ /*
+ * Any packet that leaves via this function must come back
+@@ -123,7 +144,8 @@
+ struct net_device *indev,
+ struct net_device *outdev,
+ int (*okfn)(struct sk_buff *),
+- unsigned int queuenum)
++ unsigned int queuenum,
++ unsigned int queuetype)
+ {
+ int status = -ENOENT;
+ struct nf_queue_entry *entry = NULL;
+@@ -137,7 +159,17 @@
+ /* QUEUE == DROP if no one is waiting, to be safe. */
+ rcu_read_lock();
+
+- qh = rcu_dereference(queue_handler[pf]);
++ if (queuetype == NF_IMQ_QUEUE) {
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ qh = rcu_dereference(queue_imq_handler);
++#else
++ BUG();
++ goto err_unlock;
++#endif
++ } else {
++ qh = rcu_dereference(queue_handler[pf]);
++ }
++
+ if (!qh) {
+ status = -ESRCH;
+ goto err_unlock;
+@@ -209,7 +241,8 @@
+ struct net_device *indev,
+ struct net_device *outdev,
+ int (*okfn)(struct sk_buff *),
+- unsigned int queuenum)
++ unsigned int queuenum,
++ unsigned int queuetype)
+ {
+ struct sk_buff *segs;
+ int err;
+@@ -217,7 +250,7 @@
+
+ if (!skb_is_gso(skb))
+ return __nf_queue(skb, elem, pf, hook, indev, outdev, okfn,
+- queuenum);
++ queuenum, queuetype);
+
+ switch (pf) {
+ case NFPROTO_IPV4:
+@@ -244,7 +277,7 @@
+ segs->next = NULL;
+ if (err == 0)
+ err = __nf_queue(segs, elem, pf, hook, indev,
+- outdev, okfn, queuenum);
++ outdev, okfn, queuenum, queuetype);
+ if (err == 0)
+ queued++;
+ else
+@@ -299,9 +332,11 @@
+ local_bh_enable();
+ break;
+ case NF_QUEUE:
++ case NF_IMQ_QUEUE:
+ err = __nf_queue(skb, elem, entry->pf, entry->hook,
+ entry->indev, entry->outdev, entry->okfn,
+- verdict >> NF_VERDICT_QBITS);
++ verdict >> NF_VERDICT_QBITS,
++ verdict & NF_VERDICT_MASK);
+ if (err < 0) {
+ if (err == -ECANCELED)
+ goto next_hook;
+diff -uNr linux-3.2/net/netfilter/xt_IMQ.c linux-3.2-imq/net/netfilter/xt_IMQ.c
+--- linux-3.2/net/netfilter/xt_IMQ.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-3.2-imq/net/netfilter/xt_IMQ.c 2011-11-04 11:12:52.123057315 +0200
+@@ -0,0 +1,74 @@
++/*
++ * This target marks packets to be enqueued to an imq device
++ */
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_IMQ.h>
++#include <linux/imq.h>
++
++static unsigned int imq_target(struct sk_buff *pskb,
++ const struct xt_action_param *par)
++{
++ const struct xt_imq_info *mr = par->targinfo;
++
++ pskb->imq_flags = (mr->todev & IMQ_F_IFMASK) | IMQ_F_ENQUEUE;
++
++ return XT_CONTINUE;
++}
++
++static int imq_checkentry(const struct xt_tgchk_param *par)
++{
++ struct xt_imq_info *mr = par->targinfo;
++
++ if (mr->todev > IMQ_MAX_DEVS - 1) {
++ printk(KERN_WARNING
++ "IMQ: invalid device specified, highest is %u\n",
++ IMQ_MAX_DEVS - 1);
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static struct xt_target xt_imq_reg[] __read_mostly = {
++ {
++ .name = "IMQ",
++ .family = AF_INET,
++ .checkentry = imq_checkentry,
++ .target = imq_target,
++ .targetsize = sizeof(struct xt_imq_info),
++ .table = "mangle",
++ .me = THIS_MODULE
++ },
++ {
++ .name = "IMQ",
++ .family = AF_INET6,
++ .checkentry = imq_checkentry,
++ .target = imq_target,
++ .targetsize = sizeof(struct xt_imq_info),
++ .table = "mangle",
++ .me = THIS_MODULE
++ },
++};
++
++static int __init imq_init(void)
++{
++ return xt_register_targets(xt_imq_reg, ARRAY_SIZE(xt_imq_reg));
++}
++
++static void __exit imq_fini(void)
++{
++ xt_unregister_targets(xt_imq_reg, ARRAY_SIZE(xt_imq_reg));
++}
++
++module_init(imq_init);
++module_exit(imq_fini);
++
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. "
++ "See http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("ipt_IMQ");
++MODULE_ALIAS("ip6t_IMQ");
++
--- /dev/null
+With commit 3d3f78d752bf, reboot seems to broken on ARM
+machines. CPU dies while doing flush_pmd_entry() as part of
+setup_mm_for_reboot()
+
+I know this is not the fix but intention is to report the
+issue and also provide temporary fix till it get fixed correctly
+
+Signed-off-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
+Reported-by: Anand Gadiyar <gadiyar@xxxxxx>
+---
+Tested with OMAP4 device.
+
+ arch/arm/kernel/process.c | 1 -
+ 1 files changed, 0 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
+index e76fcaa..ac370b2 100644
+--- a/arch/arm/kernel/process.c
++++ b/arch/arm/kernel/process.c
+@@ -247,7 +247,6 @@ void machine_power_off(void)
+
+ void machine_restart(char *cmd)
+ {
+- machine_shutdown();
+ arm_pm_restart(reboot_mode, cmd);
+ }
+
+--
+1.6.0.4
--- /dev/null
+diff -Naur linux-3.0.24.org/include/linux/netfilter/xt_layer7.h linux-3.0.24/include/linux/netfilter/xt_layer7.h
+--- linux-3.0.24.org/include/linux/netfilter/xt_layer7.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.0.24/include/linux/netfilter/xt_layer7.h 2012-03-15 20:08:48.976050501 +0100
+@@ -0,0 +1,13 @@
++#ifndef _XT_LAYER7_H
++#define _XT_LAYER7_H
++
++#define MAX_PATTERN_LEN 8192
++#define MAX_PROTOCOL_LEN 256
++
++struct xt_layer7_info {
++ char protocol[MAX_PROTOCOL_LEN];
++ char pattern[MAX_PATTERN_LEN];
++ u_int8_t invert;
++};
++
++#endif /* _XT_LAYER7_H */
+diff -Naur linux-3.0.24.org/include/net/netfilter/nf_conntrack.h linux-3.0.24/include/net/netfilter/nf_conntrack.h
+--- linux-3.0.24.org/include/net/netfilter/nf_conntrack.h 2012-03-12 18:58:19.000000000 +0100
++++ linux-3.0.24/include/net/netfilter/nf_conntrack.h 2012-03-15 20:11:43.806042495 +0100
+@@ -134,6 +134,22 @@
+ struct net *ct_net;
+ #endif
+
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || \
++ defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++ struct {
++ /*
++ * e.g. "http". NULL before decision. "unknown" after decision
++ * if no match.
++ */
++ char *app_proto;
++ /*
++ * application layer data so far. NULL after match decision.
++ */
++ char *app_data;
++ unsigned int app_data_len;
++ } layer7;
++#endif
++
+ /* Storage reserved for other modules, must be the last member */
+ union nf_conntrack_proto proto;
+ };
+diff -Naur linux-3.0.24.org/net/netfilter/Kconfig linux-3.0.24/net/netfilter/Kconfig
+--- linux-3.0.24.org/net/netfilter/Kconfig 2012-03-12 18:58:19.000000000 +0100
++++ linux-3.0.24/net/netfilter/Kconfig 2012-03-15 20:46:12.046043918 +0100
+@@ -1020,6 +1020,26 @@
+
+ To compile it as a module, choose M here. If unsure, say N.
+
++config NETFILTER_XT_MATCH_LAYER7
++ tristate '"layer7" match support'
++ depends on NETFILTER_XTABLES
++ depends on EXPERIMENTAL && (IP_NF_CONNTRACK || NF_CONNTRACK)
++ help
++ Say Y if you want to be able to classify connections (and their
++ packets) based on regular expression matching of their application
++ layer data. This is one way to classify applications such as
++ peer-to-peer filesharing systems that do not always use the same
++ port.
++
++ To compile it as a module, choose M here. If unsure, say N.
++
++config NETFILTER_XT_MATCH_LAYER7_DEBUG
++ bool 'Layer 7 debugging output'
++ depends on NETFILTER_XT_MATCH_LAYER7
++ help
++ Say Y to get lots of debugging output.
++
++
+ config NETFILTER_XT_MATCH_STATISTIC
+ tristate '"statistic" match support'
+ depends on NETFILTER_ADVANCED
+diff -Naur linux-3.0.24.org/net/netfilter/Makefile linux-3.0.24/net/netfilter/Makefile
+--- linux-3.0.24.org/net/netfilter/Makefile 2012-03-12 18:58:19.000000000 +0100
++++ linux-3.0.24/net/netfilter/Makefile 2012-03-15 20:08:49.016044445 +0100
+@@ -102,6 +102,7 @@
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SOCKET) += xt_socket.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
++obj-$(CONFIG_NETFILTER_XT_MATCH_LAYER7) += xt_layer7.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
+diff -Naur linux-3.0.24.org/net/netfilter/nf_conntrack_core.c linux-3.0.24/net/netfilter/nf_conntrack_core.c
+--- linux-3.0.24.org/net/netfilter/nf_conntrack_core.c 2012-03-12 18:58:19.000000000 +0100
++++ linux-3.0.24/net/netfilter/nf_conntrack_core.c 2012-03-15 20:08:49.026044761 +0100
+@@ -213,6 +213,14 @@
+ * too. */
+ nf_ct_remove_expectations(ct);
+
++ #if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++ if(ct->layer7.app_proto)
++ kfree(ct->layer7.app_proto);
++ if(ct->layer7.app_data)
++ kfree(ct->layer7.app_data);
++ #endif
++
++
+ /* We overload first tuple to link into unconfirmed list. */
+ if (!nf_ct_is_confirmed(ct)) {
+ BUG_ON(hlist_nulls_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode));
+diff -Naur linux-3.0.24.org/net/netfilter/nf_conntrack_standalone.c linux-3.0.24/net/netfilter/nf_conntrack_standalone.c
+--- linux-3.0.24.org/net/netfilter/nf_conntrack_standalone.c 2012-03-12 18:58:19.000000000 +0100
++++ linux-3.0.24/net/netfilter/nf_conntrack_standalone.c 2012-03-15 20:08:49.036047262 +0100
+@@ -239,6 +239,12 @@
+ if (ct_show_delta_time(s, ct))
+ goto release;
+
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++ if(ct->layer7.app_proto &&
++ seq_printf(s, "l7proto=%s ", ct->layer7.app_proto))
++ return -ENOSPC;
++#endif
++
+ if (seq_printf(s, "use=%u\n", atomic_read(&ct->ct_general.use)))
+ goto release;
+
+diff -Naur linux-3.0.24.org/net/netfilter/regexp/regexp.c linux-3.0.24/net/netfilter/regexp/regexp.c
+--- linux-3.0.24.org/net/netfilter/regexp/regexp.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.0.24/net/netfilter/regexp/regexp.c 2012-03-15 20:08:49.066043520 +0100
+@@ -0,0 +1,1197 @@
++/*
++ * regcomp and regexec -- regsub and regerror are elsewhere
++ * @(#)regexp.c 1.3 of 18 April 87
++ *
++ * Copyright (c) 1986 by University of Toronto.
++ * Written by Henry Spencer. Not derived from licensed software.
++ *
++ * Permission is granted to anyone to use this software for any
++ * purpose on any computer system, and to redistribute it freely,
++ * subject to the following restrictions:
++ *
++ * 1. The author is not responsible for the consequences of use of
++ * this software, no matter how awful, even if they arise
++ * from defects in it.
++ *
++ * 2. The origin of this software must not be misrepresented, either
++ * by explicit claim or by omission.
++ *
++ * 3. Altered versions must be plainly marked as such, and must not
++ * be misrepresented as being the original software.
++ *
++ * Beware that some of this code is subtly aware of the way operator
++ * precedence is structured in regular expressions. Serious changes in
++ * regular-expression syntax might require a total rethink.
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ * Modified slightly by Matthew Strait to use more modern C.
++ */
++
++#include "regexp.h"
++#include "regmagic.h"
++
++/* added by ethan and matt. Lets it work in both kernel and user space.
++(So iptables can use it, for instance.) Yea, it goes both ways... */
++#if __KERNEL__
++ #define malloc(foo) kmalloc(foo,GFP_ATOMIC)
++#else
++ #define printk(format,args...) printf(format,##args)
++#endif
++
++void regerror(char * s)
++{
++ printk("<3>Regexp: %s\n", s);
++ /* NOTREACHED */
++}
++
++/*
++ * The "internal use only" fields in regexp.h are present to pass info from
++ * compile to execute that permits the execute phase to run lots faster on
++ * simple cases. They are:
++ *
++ * regstart char that must begin a match; '\0' if none obvious
++ * reganch is the match anchored (at beginning-of-line only)?
++ * regmust string (pointer into program) that match must include, or NULL
++ * regmlen length of regmust string
++ *
++ * Regstart and reganch permit very fast decisions on suitable starting points
++ * for a match, cutting down the work a lot. Regmust permits fast rejection
++ * of lines that cannot possibly match. The regmust tests are costly enough
++ * that regcomp() supplies a regmust only if the r.e. contains something
++ * potentially expensive (at present, the only such thing detected is * or +
++ * at the start of the r.e., which can involve a lot of backup). Regmlen is
++ * supplied because the test in regexec() needs it and regcomp() is computing
++ * it anyway.
++ */
++
++/*
++ * Structure for regexp "program". This is essentially a linear encoding
++ * of a nondeterministic finite-state machine (aka syntax charts or
++ * "railroad normal form" in parsing technology). Each node is an opcode
++ * plus a "next" pointer, possibly plus an operand. "Next" pointers of
++ * all nodes except BRANCH implement concatenation; a "next" pointer with
++ * a BRANCH on both ends of it is connecting two alternatives. (Here we
++ * have one of the subtle syntax dependencies: an individual BRANCH (as
++ * opposed to a collection of them) is never concatenated with anything
++ * because of operator precedence.) The operand of some types of node is
++ * a literal string; for others, it is a node leading into a sub-FSM. In
++ * particular, the operand of a BRANCH node is the first node of the branch.
++ * (NB this is *not* a tree structure: the tail of the branch connects
++ * to the thing following the set of BRANCHes.) The opcodes are:
++ */
++
++/* definition number opnd? meaning */
++#define END 0 /* no End of program. */
++#define BOL 1 /* no Match "" at beginning of line. */
++#define EOL 2 /* no Match "" at end of line. */
++#define ANY 3 /* no Match any one character. */
++#define ANYOF 4 /* str Match any character in this string. */
++#define ANYBUT 5 /* str Match any character not in this string. */
++#define BRANCH 6 /* node Match this alternative, or the next... */
++#define BACK 7 /* no Match "", "next" ptr points backward. */
++#define EXACTLY 8 /* str Match this string. */
++#define NOTHING 9 /* no Match empty string. */
++#define STAR 10 /* node Match this (simple) thing 0 or more times. */
++#define PLUS 11 /* node Match this (simple) thing 1 or more times. */
++#define OPEN 20 /* no Mark this point in input as start of #n. */
++ /* OPEN+1 is number 1, etc. */
++#define CLOSE 30 /* no Analogous to OPEN. */
++
++/*
++ * Opcode notes:
++ *
++ * BRANCH The set of branches constituting a single choice are hooked
++ * together with their "next" pointers, since precedence prevents
++ * anything being concatenated to any individual branch. The
++ * "next" pointer of the last BRANCH in a choice points to the
++ * thing following the whole choice. This is also where the
++ * final "next" pointer of each individual branch points; each
++ * branch starts with the operand node of a BRANCH node.
++ *
++ * BACK Normal "next" pointers all implicitly point forward; BACK
++ * exists to make loop structures possible.
++ *
++ * STAR,PLUS '?', and complex '*' and '+', are implemented as circular
++ * BRANCH structures using BACK. Simple cases (one character
++ * per match) are implemented with STAR and PLUS for speed
++ * and to minimize recursive plunges.
++ *
++ * OPEN,CLOSE ...are numbered at compile time.
++ */
++
++/*
++ * A node is one char of opcode followed by two chars of "next" pointer.
++ * "Next" pointers are stored as two 8-bit pieces, high order first. The
++ * value is a positive offset from the opcode of the node containing it.
++ * An operand, if any, simply follows the node. (Note that much of the
++ * code generation knows about this implicit relationship.)
++ *
++ * Using two bytes for the "next" pointer is vast overkill for most things,
++ * but allows patterns to get big without disasters.
++ */
++#define OP(p) (*(p))
++#define NEXT(p) (((*((p)+1)&0377)<<8) + (*((p)+2)&0377))
++#define OPERAND(p) ((p) + 3)
++
++/*
++ * See regmagic.h for one further detail of program structure.
++ */
++
++
++/*
++ * Utility definitions.
++ */
++#ifndef CHARBITS
++#define UCHARAT(p) ((int)*(unsigned char *)(p))
++#else
++#define UCHARAT(p) ((int)*(p)&CHARBITS)
++#endif
++
++#define FAIL(m) { regerror(m); return(NULL); }
++#define ISMULT(c) ((c) == '*' || (c) == '+' || (c) == '?')
++#define META "^$.[()|?+*\\"
++
++/*
++ * Flags to be passed up and down.
++ */
++#define HASWIDTH 01 /* Known never to match null string. */
++#define SIMPLE 02 /* Simple enough to be STAR/PLUS operand. */
++#define SPSTART 04 /* Starts with * or +. */
++#define WORST 0 /* Worst case. */
++
++/*
++ * Global work variables for regcomp().
++ */
++struct match_globals {
++char *reginput; /* String-input pointer. */
++char *regbol; /* Beginning of input, for ^ check. */
++char **regstartp; /* Pointer to startp array. */
++char **regendp; /* Ditto for endp. */
++char *regparse; /* Input-scan pointer. */
++int regnpar; /* () count. */
++char regdummy;
++char *regcode; /* Code-emit pointer; ®dummy = don't. */
++long regsize; /* Code size. */
++};
++
++/*
++ * Forward declarations for regcomp()'s friends.
++ */
++#ifndef STATIC
++#define STATIC static
++#endif
++STATIC char *reg(struct match_globals *g, int paren,int *flagp);
++STATIC char *regbranch(struct match_globals *g, int *flagp);
++STATIC char *regpiece(struct match_globals *g, int *flagp);
++STATIC char *regatom(struct match_globals *g, int *flagp);
++STATIC char *regnode(struct match_globals *g, char op);
++STATIC char *regnext(struct match_globals *g, char *p);
++STATIC void regc(struct match_globals *g, char b);
++STATIC void reginsert(struct match_globals *g, char op, char *opnd);
++STATIC void regtail(struct match_globals *g, char *p, char *val);
++STATIC void regoptail(struct match_globals *g, char *p, char *val);
++
++
++__kernel_size_t my_strcspn(const char *s1,const char *s2)
++{
++ char *scan1;
++ char *scan2;
++ int count;
++
++ count = 0;
++ for (scan1 = (char *)s1; *scan1 != '\0'; scan1++) {
++ for (scan2 = (char *)s2; *scan2 != '\0';) /* ++ moved down. */
++ if (*scan1 == *scan2++)
++ return(count);
++ count++;
++ }
++ return(count);
++}
++
++/*
++ - regcomp - compile a regular expression into internal code
++ *
++ * We can't allocate space until we know how big the compiled form will be,
++ * but we can't compile it (and thus know how big it is) until we've got a
++ * place to put the code. So we cheat: we compile it twice, once with code
++ * generation turned off and size counting turned on, and once "for real".
++ * This also means that we don't allocate space until we are sure that the
++ * thing really will compile successfully, and we never have to move the
++ * code and thus invalidate pointers into it. (Note that it has to be in
++ * one piece because free() must be able to free it all.)
++ *
++ * Beware that the optimization-preparation code in here knows about some
++ * of the structure of the compiled regexp.
++ */
++regexp *
++regcomp(char *exp,int *patternsize)
++{
++ register regexp *r;
++ register char *scan;
++ register char *longest;
++ register int len;
++ int flags;
++ struct match_globals g;
++
++ /* commented out by ethan
++ extern char *malloc();
++ */
++
++ if (exp == NULL)
++ FAIL("NULL argument");
++
++ /* First pass: determine size, legality. */
++ g.regparse = exp;
++ g.regnpar = 1;
++ g.regsize = 0L;
++ g.regcode = &g.regdummy;
++ regc(&g, MAGIC);
++ if (reg(&g, 0, &flags) == NULL)
++ return(NULL);
++
++ /* Small enough for pointer-storage convention? */
++ if (g.regsize >= 32767L) /* Probably could be 65535L. */
++ FAIL("regexp too big");
++
++ /* Allocate space. */
++ *patternsize=sizeof(regexp) + (unsigned)g.regsize;
++ r = (regexp *)malloc(sizeof(regexp) + (unsigned)g.regsize);
++ if (r == NULL)
++ FAIL("out of space");
++
++ /* Second pass: emit code. */
++ g.regparse = exp;
++ g.regnpar = 1;
++ g.regcode = r->program;
++ regc(&g, MAGIC);
++ if (reg(&g, 0, &flags) == NULL)
++ return(NULL);
++
++ /* Dig out information for optimizations. */
++ r->regstart = '\0'; /* Worst-case defaults. */
++ r->reganch = 0;
++ r->regmust = NULL;
++ r->regmlen = 0;
++ scan = r->program+1; /* First BRANCH. */
++ if (OP(regnext(&g, scan)) == END) { /* Only one top-level choice. */
++ scan = OPERAND(scan);
++
++ /* Starting-point info. */
++ if (OP(scan) == EXACTLY)
++ r->regstart = *OPERAND(scan);
++ else if (OP(scan) == BOL)
++ r->reganch++;
++
++ /*
++ * If there's something expensive in the r.e., find the
++ * longest literal string that must appear and make it the
++ * regmust. Resolve ties in favor of later strings, since
++ * the regstart check works with the beginning of the r.e.
++ * and avoiding duplication strengthens checking. Not a
++ * strong reason, but sufficient in the absence of others.
++ */
++ if (flags&SPSTART) {
++ longest = NULL;
++ len = 0;
++ for (; scan != NULL; scan = regnext(&g, scan))
++ if (OP(scan) == EXACTLY && strlen(OPERAND(scan)) >= len) {
++ longest = OPERAND(scan);
++ len = strlen(OPERAND(scan));
++ }
++ r->regmust = longest;
++ r->regmlen = len;
++ }
++ }
++
++ return(r);
++}
++
++/*
++ - reg - regular expression, i.e. main body or parenthesized thing
++ *
++ * Caller must absorb opening parenthesis.
++ *
++ * Combining parenthesis handling with the base level of regular expression
++ * is a trifle forced, but the need to tie the tails of the branches to what
++ * follows makes it hard to avoid.
++ */
++static char *
++reg(struct match_globals *g, int paren, int *flagp /* Parenthesized? */ )
++{
++ register char *ret;
++ register char *br;
++ register char *ender;
++ register int parno = 0; /* 0 makes gcc happy */
++ int flags;
++
++ *flagp = HASWIDTH; /* Tentatively. */
++
++ /* Make an OPEN node, if parenthesized. */
++ if (paren) {
++ if (g->regnpar >= NSUBEXP)
++ FAIL("too many ()");
++ parno = g->regnpar;
++ g->regnpar++;
++ ret = regnode(g, OPEN+parno);
++ } else
++ ret = NULL;
++
++ /* Pick up the branches, linking them together. */
++ br = regbranch(g, &flags);
++ if (br == NULL)
++ return(NULL);
++ if (ret != NULL)
++ regtail(g, ret, br); /* OPEN -> first. */
++ else
++ ret = br;
++ if (!(flags&HASWIDTH))
++ *flagp &= ~HASWIDTH;
++ *flagp |= flags&SPSTART;
++ while (*g->regparse == '|') {
++ g->regparse++;
++ br = regbranch(g, &flags);
++ if (br == NULL)
++ return(NULL);
++ regtail(g, ret, br); /* BRANCH -> BRANCH. */
++ if (!(flags&HASWIDTH))
++ *flagp &= ~HASWIDTH;
++ *flagp |= flags&SPSTART;
++ }
++
++ /* Make a closing node, and hook it on the end. */
++ ender = regnode(g, (paren) ? CLOSE+parno : END);
++ regtail(g, ret, ender);
++
++ /* Hook the tails of the branches to the closing node. */
++ for (br = ret; br != NULL; br = regnext(g, br))
++ regoptail(g, br, ender);
++
++ /* Check for proper termination. */
++ if (paren && *g->regparse++ != ')') {
++ FAIL("unmatched ()");
++ } else if (!paren && *g->regparse != '\0') {
++ if (*g->regparse == ')') {
++ FAIL("unmatched ()");
++ } else
++ FAIL("junk on end"); /* "Can't happen". */
++ /* NOTREACHED */
++ }
++
++ return(ret);
++}
++
++/*
++ - regbranch - one alternative of an | operator
++ *
++ * Implements the concatenation operator.
++ */
++static char *
++regbranch(struct match_globals *g, int *flagp)
++{
++ register char *ret;
++ register char *chain;
++ register char *latest;
++ int flags;
++
++ *flagp = WORST; /* Tentatively. */
++
++ ret = regnode(g, BRANCH);
++ chain = NULL;
++ while (*g->regparse != '\0' && *g->regparse != '|' && *g->regparse != ')') {
++ latest = regpiece(g, &flags);
++ if (latest == NULL)
++ return(NULL);
++ *flagp |= flags&HASWIDTH;
++ if (chain == NULL) /* First piece. */
++ *flagp |= flags&SPSTART;
++ else
++ regtail(g, chain, latest);
++ chain = latest;
++ }
++ if (chain == NULL) /* Loop ran zero times. */
++ (void) regnode(g, NOTHING);
++
++ return(ret);
++}
++
++/*
++ - regpiece - something followed by possible [*+?]
++ *
++ * Note that the branching code sequences used for ? and the general cases
++ * of * and + are somewhat optimized: they use the same NOTHING node as
++ * both the endmarker for their branch list and the body of the last branch.
++ * It might seem that this node could be dispensed with entirely, but the
++ * endmarker role is not redundant.
++ */
++static char *
++regpiece(struct match_globals *g, int *flagp)
++{
++ register char *ret;
++ register char op;
++ register char *next;
++ int flags;
++
++ ret = regatom(g, &flags);
++ if (ret == NULL)
++ return(NULL);
++
++ op = *g->regparse;
++ if (!ISMULT(op)) {
++ *flagp = flags;
++ return(ret);
++ }
++
++ if (!(flags&HASWIDTH) && op != '?')
++ FAIL("*+ operand could be empty");
++ *flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH);
++
++ if (op == '*' && (flags&SIMPLE))
++ reginsert(g, STAR, ret);
++ else if (op == '*') {
++ /* Emit x* as (x&|), where & means "self". */
++ reginsert(g, BRANCH, ret); /* Either x */
++ regoptail(g, ret, regnode(g, BACK)); /* and loop */
++ regoptail(g, ret, ret); /* back */
++ regtail(g, ret, regnode(g, BRANCH)); /* or */
++ regtail(g, ret, regnode(g, NOTHING)); /* null. */
++ } else if (op == '+' && (flags&SIMPLE))
++ reginsert(g, PLUS, ret);
++ else if (op == '+') {
++ /* Emit x+ as x(&|), where & means "self". */
++ next = regnode(g, BRANCH); /* Either */
++ regtail(g, ret, next);
++ regtail(g, regnode(g, BACK), ret); /* loop back */
++ regtail(g, next, regnode(g, BRANCH)); /* or */
++ regtail(g, ret, regnode(g, NOTHING)); /* null. */
++ } else if (op == '?') {
++ /* Emit x? as (x|) */
++ reginsert(g, BRANCH, ret); /* Either x */
++ regtail(g, ret, regnode(g, BRANCH)); /* or */
++ next = regnode(g, NOTHING); /* null. */
++ regtail(g, ret, next);
++ regoptail(g, ret, next);
++ }
++ g->regparse++;
++ if (ISMULT(*g->regparse))
++ FAIL("nested *?+");
++
++ return(ret);
++}
++
++/*
++ - regatom - the lowest level
++ *
++ * Optimization: gobbles an entire sequence of ordinary characters so that
++ * it can turn them into a single node, which is smaller to store and
++ * faster to run. Backslashed characters are exceptions, each becoming a
++ * separate node; the code is simpler that way and it's not worth fixing.
++ */
++static char *
++regatom(struct match_globals *g, int *flagp)
++{
++ register char *ret;
++ int flags;
++
++ *flagp = WORST; /* Tentatively. */
++
++ switch (*g->regparse++) {
++ case '^':
++ ret = regnode(g, BOL);
++ break;
++ case '$':
++ ret = regnode(g, EOL);
++ break;
++ case '.':
++ ret = regnode(g, ANY);
++ *flagp |= HASWIDTH|SIMPLE;
++ break;
++ case '[': {
++ register int class;
++ register int classend;
++
++ if (*g->regparse == '^') { /* Complement of range. */
++ ret = regnode(g, ANYBUT);
++ g->regparse++;
++ } else
++ ret = regnode(g, ANYOF);
++ if (*g->regparse == ']' || *g->regparse == '-')
++ regc(g, *g->regparse++);
++ while (*g->regparse != '\0' && *g->regparse != ']') {
++ if (*g->regparse == '-') {
++ g->regparse++;
++ if (*g->regparse == ']' || *g->regparse == '\0')
++ regc(g, '-');
++ else {
++ class = UCHARAT(g->regparse-2)+1;
++ classend = UCHARAT(g->regparse);
++ if (class > classend+1)
++ FAIL("invalid [] range");
++ for (; class <= classend; class++)
++ regc(g, class);
++ g->regparse++;
++ }
++ } else
++ regc(g, *g->regparse++);
++ }
++ regc(g, '\0');
++ if (*g->regparse != ']')
++ FAIL("unmatched []");
++ g->regparse++;
++ *flagp |= HASWIDTH|SIMPLE;
++ }
++ break;
++ case '(':
++ ret = reg(g, 1, &flags);
++ if (ret == NULL)
++ return(NULL);
++ *flagp |= flags&(HASWIDTH|SPSTART);
++ break;
++ case '\0':
++ case '|':
++ case ')':
++ FAIL("internal urp"); /* Supposed to be caught earlier. */
++ break;
++ case '?':
++ case '+':
++ case '*':
++ FAIL("?+* follows nothing");
++ break;
++ case '\\':
++ if (*g->regparse == '\0')
++ FAIL("trailing \\");
++ ret = regnode(g, EXACTLY);
++ regc(g, *g->regparse++);
++ regc(g, '\0');
++ *flagp |= HASWIDTH|SIMPLE;
++ break;
++ default: {
++ register int len;
++ register char ender;
++
++ g->regparse--;
++ len = my_strcspn((const char *)g->regparse, (const char *)META);
++ if (len <= 0)
++ FAIL("internal disaster");
++ ender = *(g->regparse+len);
++ if (len > 1 && ISMULT(ender))
++ len--; /* Back off clear of ?+* operand. */
++ *flagp |= HASWIDTH;
++ if (len == 1)
++ *flagp |= SIMPLE;
++ ret = regnode(g, EXACTLY);
++ while (len > 0) {
++ regc(g, *g->regparse++);
++ len--;
++ }
++ regc(g, '\0');
++ }
++ break;
++ }
++
++ return(ret);
++}
++
++/*
++ - regnode - emit a node
++ */
++static char * /* Location. */
++regnode(struct match_globals *g, char op)
++{
++ register char *ret;
++ register char *ptr;
++
++ ret = g->regcode;
++ if (ret == &g->regdummy) {
++ g->regsize += 3;
++ return(ret);
++ }
++
++ ptr = ret;
++ *ptr++ = op;
++ *ptr++ = '\0'; /* Null "next" pointer. */
++ *ptr++ = '\0';
++ g->regcode = ptr;
++
++ return(ret);
++}
++
++/*
++ - regc - emit (if appropriate) a byte of code
++ */
++static void
++regc(struct match_globals *g, char b)
++{
++ if (g->regcode != &g->regdummy)
++ *g->regcode++ = b;
++ else
++ g->regsize++;
++}
++
++/*
++ - reginsert - insert an operator in front of already-emitted operand
++ *
++ * Means relocating the operand.
++ */
++static void
++reginsert(struct match_globals *g, char op, char* opnd)
++{
++ register char *src;
++ register char *dst;
++ register char *place;
++
++ if (g->regcode == &g->regdummy) {
++ g->regsize += 3;
++ return;
++ }
++
++ src = g->regcode;
++ g->regcode += 3;
++ dst = g->regcode;
++ while (src > opnd)
++ *--dst = *--src;
++
++ place = opnd; /* Op node, where operand used to be. */
++ *place++ = op;
++ *place++ = '\0';
++ *place++ = '\0';
++}
++
++/*
++ - regtail - set the next-pointer at the end of a node chain
++ */
++static void
++regtail(struct match_globals *g, char *p, char *val)
++{
++ register char *scan;
++ register char *temp;
++ register int offset;
++
++ if (p == &g->regdummy)
++ return;
++
++ /* Find last node. */
++ scan = p;
++ for (;;) {
++ temp = regnext(g, scan);
++ if (temp == NULL)
++ break;
++ scan = temp;
++ }
++
++ if (OP(scan) == BACK)
++ offset = scan - val;
++ else
++ offset = val - scan;
++ *(scan+1) = (offset>>8)&0377;
++ *(scan+2) = offset&0377;
++}
++
++/*
++ - regoptail - regtail on operand of first argument; nop if operandless
++ */
++static void
++regoptail(struct match_globals *g, char *p, char *val)
++{
++ /* "Operandless" and "op != BRANCH" are synonymous in practice. */
++ if (p == NULL || p == &g->regdummy || OP(p) != BRANCH)
++ return;
++ regtail(g, OPERAND(p), val);
++}
++
++/*
++ * regexec and friends
++ */
++
++
++/*
++ * Forwards.
++ */
++STATIC int regtry(struct match_globals *g, regexp *prog, char *string);
++STATIC int regmatch(struct match_globals *g, char *prog);
++STATIC int regrepeat(struct match_globals *g, char *p);
++
++#ifdef DEBUG
++int regnarrate = 0;
++void regdump();
++STATIC char *regprop(char *op);
++#endif
++
++/*
++ - regexec - match a regexp against a string
++ */
++int
++regexec(regexp *prog, char *string)
++{
++ register char *s;
++ struct match_globals g;
++
++ /* Be paranoid... */
++ if (prog == NULL || string == NULL) {
++ printk("<3>Regexp: NULL parameter\n");
++ return(0);
++ }
++
++ /* Check validity of program. */
++ if (UCHARAT(prog->program) != MAGIC) {
++ printk("<3>Regexp: corrupted program\n");
++ return(0);
++ }
++
++ /* If there is a "must appear" string, look for it. */
++ if (prog->regmust != NULL) {
++ s = string;
++ while ((s = strchr(s, prog->regmust[0])) != NULL) {
++ if (strncmp(s, prog->regmust, prog->regmlen) == 0)
++ break; /* Found it. */
++ s++;
++ }
++ if (s == NULL) /* Not present. */
++ return(0);
++ }
++
++ /* Mark beginning of line for ^ . */
++ g.regbol = string;
++
++ /* Simplest case: anchored match need be tried only once. */
++ if (prog->reganch)
++ return(regtry(&g, prog, string));
++
++ /* Messy cases: unanchored match. */
++ s = string;
++ if (prog->regstart != '\0')
++ /* We know what char it must start with. */
++ while ((s = strchr(s, prog->regstart)) != NULL) {
++ if (regtry(&g, prog, s))
++ return(1);
++ s++;
++ }
++ else
++ /* We don't -- general case. */
++ do {
++ if (regtry(&g, prog, s))
++ return(1);
++ } while (*s++ != '\0');
++
++ /* Failure. */
++ return(0);
++}
++
++/*
++ - regtry - try match at specific point
++ */
++static int /* 0 failure, 1 success */
++regtry(struct match_globals *g, regexp *prog, char *string)
++{
++ register int i;
++ register char **sp;
++ register char **ep;
++
++ g->reginput = string;
++ g->regstartp = prog->startp;
++ g->regendp = prog->endp;
++
++ sp = prog->startp;
++ ep = prog->endp;
++ for (i = NSUBEXP; i > 0; i--) {
++ *sp++ = NULL;
++ *ep++ = NULL;
++ }
++ if (regmatch(g, prog->program + 1)) {
++ prog->startp[0] = string;
++ prog->endp[0] = g->reginput;
++ return(1);
++ } else
++ return(0);
++}
++
++/*
++ - regmatch - main matching routine
++ *
++ * Conceptually the strategy is simple: check to see whether the current
++ * node matches, call self recursively to see whether the rest matches,
++ * and then act accordingly. In practice we make some effort to avoid
++ * recursion, in particular by going through "ordinary" nodes (that don't
++ * need to know whether the rest of the match failed) by a loop instead of
++ * by recursion.
++ */
++static int /* 0 failure, 1 success */
++regmatch(struct match_globals *g, char *prog)
++{
++ register char *scan = prog; /* Current node. */
++ char *next; /* Next node. */
++
++#ifdef DEBUG
++ if (scan != NULL && regnarrate)
++ fprintf(stderr, "%s(\n", regprop(scan));
++#endif
++ while (scan != NULL) {
++#ifdef DEBUG
++ if (regnarrate)
++ fprintf(stderr, "%s...\n", regprop(scan));
++#endif
++ next = regnext(g, scan);
++
++ switch (OP(scan)) {
++ case BOL:
++ if (g->reginput != g->regbol)
++ return(0);
++ break;
++ case EOL:
++ if (*g->reginput != '\0')
++ return(0);
++ break;
++ case ANY:
++ if (*g->reginput == '\0')
++ return(0);
++ g->reginput++;
++ break;
++ case EXACTLY: {
++ register int len;
++ register char *opnd;
++
++ opnd = OPERAND(scan);
++ /* Inline the first character, for speed. */
++ if (*opnd != *g->reginput)
++ return(0);
++ len = strlen(opnd);
++ if (len > 1 && strncmp(opnd, g->reginput, len) != 0)
++ return(0);
++ g->reginput += len;
++ }
++ break;
++ case ANYOF:
++ if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) == NULL)
++ return(0);
++ g->reginput++;
++ break;
++ case ANYBUT:
++ if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) != NULL)
++ return(0);
++ g->reginput++;
++ break;
++ case NOTHING:
++ case BACK:
++ break;
++ case OPEN+1:
++ case OPEN+2:
++ case OPEN+3:
++ case OPEN+4:
++ case OPEN+5:
++ case OPEN+6:
++ case OPEN+7:
++ case OPEN+8:
++ case OPEN+9: {
++ register int no;
++ register char *save;
++
++ no = OP(scan) - OPEN;
++ save = g->reginput;
++
++ if (regmatch(g, next)) {
++ /*
++ * Don't set startp if some later
++ * invocation of the same parentheses
++ * already has.
++ */
++ if (g->regstartp[no] == NULL)
++ g->regstartp[no] = save;
++ return(1);
++ } else
++ return(0);
++ }
++ break;
++ case CLOSE+1:
++ case CLOSE+2:
++ case CLOSE+3:
++ case CLOSE+4:
++ case CLOSE+5:
++ case CLOSE+6:
++ case CLOSE+7:
++ case CLOSE+8:
++ case CLOSE+9:
++ {
++ register int no;
++ register char *save;
++
++ no = OP(scan) - CLOSE;
++ save = g->reginput;
++
++ if (regmatch(g, next)) {
++ /*
++ * Don't set endp if some later
++ * invocation of the same parentheses
++ * already has.
++ */
++ if (g->regendp[no] == NULL)
++ g->regendp[no] = save;
++ return(1);
++ } else
++ return(0);
++ }
++ break;
++ case BRANCH: {
++ register char *save;
++
++ if (OP(next) != BRANCH) /* No choice. */
++ next = OPERAND(scan); /* Avoid recursion. */
++ else {
++ do {
++ save = g->reginput;
++ if (regmatch(g, OPERAND(scan)))
++ return(1);
++ g->reginput = save;
++ scan = regnext(g, scan);
++ } while (scan != NULL && OP(scan) == BRANCH);
++ return(0);
++ /* NOTREACHED */
++ }
++ }
++ break;
++ case STAR:
++ case PLUS: {
++ register char nextch;
++ register int no;
++ register char *save;
++ register int min;
++
++ /*
++ * Lookahead to avoid useless match attempts
++ * when we know what character comes next.
++ */
++ nextch = '\0';
++ if (OP(next) == EXACTLY)
++ nextch = *OPERAND(next);
++ min = (OP(scan) == STAR) ? 0 : 1;
++ save = g->reginput;
++ no = regrepeat(g, OPERAND(scan));
++ while (no >= min) {
++ /* If it could work, try it. */
++ if (nextch == '\0' || *g->reginput == nextch)
++ if (regmatch(g, next))
++ return(1);
++ /* Couldn't or didn't -- back up. */
++ no--;
++ g->reginput = save + no;
++ }
++ return(0);
++ }
++ break;
++ case END:
++ return(1); /* Success! */
++ break;
++ default:
++ printk("<3>Regexp: memory corruption\n");
++ return(0);
++ break;
++ }
++
++ scan = next;
++ }
++
++ /*
++ * We get here only if there's trouble -- normally "case END" is
++ * the terminating point.
++ */
++ printk("<3>Regexp: corrupted pointers\n");
++ return(0);
++}
++
++/*
++ - regrepeat - repeatedly match something simple, report how many
++ */
++static int
++regrepeat(struct match_globals *g, char *p)
++{
++ register int count = 0;
++ register char *scan;
++ register char *opnd;
++
++ scan = g->reginput;
++ opnd = OPERAND(p);
++ switch (OP(p)) {
++ case ANY:
++ count = strlen(scan);
++ scan += count;
++ break;
++ case EXACTLY:
++ while (*opnd == *scan) {
++ count++;
++ scan++;
++ }
++ break;
++ case ANYOF:
++ while (*scan != '\0' && strchr(opnd, *scan) != NULL) {
++ count++;
++ scan++;
++ }
++ break;
++ case ANYBUT:
++ while (*scan != '\0' && strchr(opnd, *scan) == NULL) {
++ count++;
++ scan++;
++ }
++ break;
++ default: /* Oh dear. Called inappropriately. */
++ printk("<3>Regexp: internal foulup\n");
++ count = 0; /* Best compromise. */
++ break;
++ }
++ g->reginput = scan;
++
++ return(count);
++}
++
++/*
++ - regnext - dig the "next" pointer out of a node
++ */
++static char*
++regnext(struct match_globals *g, char *p)
++{
++ register int offset;
++
++ if (p == &g->regdummy)
++ return(NULL);
++
++ offset = NEXT(p);
++ if (offset == 0)
++ return(NULL);
++
++ if (OP(p) == BACK)
++ return(p-offset);
++ else
++ return(p+offset);
++}
++
++#ifdef DEBUG
++
++STATIC char *regprop();
++
++/*
++ - regdump - dump a regexp onto stdout in vaguely comprehensible form
++ */
++void
++regdump(regexp *r)
++{
++ register char *s;
++ register char op = EXACTLY; /* Arbitrary non-END op. */
++ register char *next;
++ /* extern char *strchr(); */
++
++
++ s = r->program + 1;
++ while (op != END) { /* While that wasn't END last time... */
++ op = OP(s);
++ printf("%2d%s", s-r->program, regprop(s)); /* Where, what. */
++ next = regnext(s);
++ if (next == NULL) /* Next ptr. */
++ printf("(0)");
++ else
++ printf("(%d)", (s-r->program)+(next-s));
++ s += 3;
++ if (op == ANYOF || op == ANYBUT || op == EXACTLY) {
++ /* Literal string, where present. */
++ while (*s != '\0') {
++ putchar(*s);
++ s++;
++ }
++ s++;
++ }
++ putchar('\n');
++ }
++
++ /* Header fields of interest. */
++ if (r->regstart != '\0')
++ printf("start `%c' ", r->regstart);
++ if (r->reganch)
++ printf("anchored ");
++ if (r->regmust != NULL)
++ printf("must have \"%s\"", r->regmust);
++ printf("\n");
++}
++
++/*
++ - regprop - printable representation of opcode
++ */
++static char *
++regprop(char *op)
++{
++#define BUFLEN 50
++ register char *p;
++ static char buf[BUFLEN];
++
++ strcpy(buf, ":");
++
++ switch (OP(op)) {
++ case BOL:
++ p = "BOL";
++ break;
++ case EOL:
++ p = "EOL";
++ break;
++ case ANY:
++ p = "ANY";
++ break;
++ case ANYOF:
++ p = "ANYOF";
++ break;
++ case ANYBUT:
++ p = "ANYBUT";
++ break;
++ case BRANCH:
++ p = "BRANCH";
++ break;
++ case EXACTLY:
++ p = "EXACTLY";
++ break;
++ case NOTHING:
++ p = "NOTHING";
++ break;
++ case BACK:
++ p = "BACK";
++ break;
++ case END:
++ p = "END";
++ break;
++ case OPEN+1:
++ case OPEN+2:
++ case OPEN+3:
++ case OPEN+4:
++ case OPEN+5:
++ case OPEN+6:
++ case OPEN+7:
++ case OPEN+8:
++ case OPEN+9:
++ snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "OPEN%d", OP(op)-OPEN);
++ p = NULL;
++ break;
++ case CLOSE+1:
++ case CLOSE+2:
++ case CLOSE+3:
++ case CLOSE+4:
++ case CLOSE+5:
++ case CLOSE+6:
++ case CLOSE+7:
++ case CLOSE+8:
++ case CLOSE+9:
++ snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "CLOSE%d", OP(op)-CLOSE);
++ p = NULL;
++ break;
++ case STAR:
++ p = "STAR";
++ break;
++ case PLUS:
++ p = "PLUS";
++ break;
++ default:
++ printk("<3>Regexp: corrupted opcode\n");
++ break;
++ }
++ if (p != NULL)
++ strncat(buf, p, BUFLEN-strlen(buf));
++ return(buf);
++}
++#endif
++
++
+diff -Naur linux-3.0.24.org/net/netfilter/regexp/regexp.h linux-3.0.24/net/netfilter/regexp/regexp.h
+--- linux-3.0.24.org/net/netfilter/regexp/regexp.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.0.24/net/netfilter/regexp/regexp.h 2012-03-15 20:08:49.066043520 +0100
+@@ -0,0 +1,41 @@
++/*
++ * Definitions etc. for regexp(3) routines.
++ *
++ * Caveat: this is V8 regexp(3) [actually, a reimplementation thereof],
++ * not the System V one.
++ */
++
++#ifndef REGEXP_H
++#define REGEXP_H
++
++
++/*
++http://www.opensource.apple.com/darwinsource/10.3/expect-1/expect/expect.h ,
++which contains a version of this library, says:
++
++ *
++ * NSUBEXP must be at least 10, and no greater than 117 or the parser
++ * will not work properly.
++ *
++
++However, it looks rather like this library is limited to 10. If you think
++otherwise, let us know.
++*/
++
++#define NSUBEXP 10
++typedef struct regexp {
++ char *startp[NSUBEXP];
++ char *endp[NSUBEXP];
++ char regstart; /* Internal use only. */
++ char reganch; /* Internal use only. */
++ char *regmust; /* Internal use only. */
++ int regmlen; /* Internal use only. */
++ char program[1]; /* Unwarranted chumminess with compiler. */
++} regexp;
++
++regexp * regcomp(char *exp, int *patternsize);
++int regexec(regexp *prog, char *string);
++void regsub(regexp *prog, char *source, char *dest);
++void regerror(char *s);
++
++#endif
+diff -Naur linux-3.0.24.org/net/netfilter/regexp/regmagic.h linux-3.0.24/net/netfilter/regexp/regmagic.h
+--- linux-3.0.24.org/net/netfilter/regexp/regmagic.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.0.24/net/netfilter/regexp/regmagic.h 2012-03-15 20:08:49.066043520 +0100
+@@ -0,0 +1,5 @@
++/*
++ * The first byte of the regexp internal "program" is actually this magic
++ * number; the start node begins in the second byte.
++ */
++#define MAGIC 0234
+diff -Naur linux-3.0.24.org/net/netfilter/regexp/regsub.c linux-3.0.24/net/netfilter/regexp/regsub.c
+--- linux-3.0.24.org/net/netfilter/regexp/regsub.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.0.24/net/netfilter/regexp/regsub.c 2012-03-15 20:08:49.076047746 +0100
+@@ -0,0 +1,95 @@
++/*
++ * regsub
++ * @(#)regsub.c 1.3 of 2 April 86
++ *
++ * Copyright (c) 1986 by University of Toronto.
++ * Written by Henry Spencer. Not derived from licensed software.
++ *
++ * Permission is granted to anyone to use this software for any
++ * purpose on any computer system, and to redistribute it freely,
++ * subject to the following restrictions:
++ *
++ * 1. The author is not responsible for the consequences of use of
++ * this software, no matter how awful, even if they arise
++ * from defects in it.
++ *
++ * 2. The origin of this software must not be misrepresented, either
++ * by explicit claim or by omission.
++ *
++ * 3. Altered versions must be plainly marked as such, and must not
++ * be misrepresented as being the original software.
++ *
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ */
++#include "regexp.h"
++#include "regmagic.h"
++#include <linux/string.h>
++
++
++#ifndef CHARBITS
++#define UCHARAT(p) ((int)*(unsigned char *)(p))
++#else
++#define UCHARAT(p) ((int)*(p)&CHARBITS)
++#endif
++
++#if 0
++//void regerror(char * s)
++//{
++// printk("regexp(3): %s", s);
++// /* NOTREACHED */
++//}
++#endif
++
++/*
++ - regsub - perform substitutions after a regexp match
++ */
++void
++regsub(regexp * prog, char * source, char * dest)
++{
++ register char *src;
++ register char *dst;
++ register char c;
++ register int no;
++ register int len;
++
++ /* Not necessary and gcc doesn't like it -MLS */
++ /*extern char *strncpy();*/
++
++ if (prog == NULL || source == NULL || dest == NULL) {
++ regerror("NULL parm to regsub");
++ return;
++ }
++ if (UCHARAT(prog->program) != MAGIC) {
++ regerror("damaged regexp fed to regsub");
++ return;
++ }
++
++ src = source;
++ dst = dest;
++ while ((c = *src++) != '\0') {
++ if (c == '&')
++ no = 0;
++ else if (c == '\\' && '0' <= *src && *src <= '9')
++ no = *src++ - '0';
++ else
++ no = -1;
++
++ if (no < 0) { /* Ordinary character. */
++ if (c == '\\' && (*src == '\\' || *src == '&'))
++ c = *src++;
++ *dst++ = c;
++ } else if (prog->startp[no] != NULL && prog->endp[no] != NULL) {
++ len = prog->endp[no] - prog->startp[no];
++ (void) strncpy(dst, prog->startp[no], len);
++ dst += len;
++ if (len != 0 && *(dst-1) == '\0') { /* strncpy hit NUL. */
++ regerror("damaged match string");
++ return;
++ }
++ }
++ }
++ *dst++ = '\0';
++}
+diff -Naur linux-3.0.24.org/net/netfilter/xt_layer7.c linux-3.0.24/net/netfilter/xt_layer7.c
+--- linux-3.0.24.org/net/netfilter/xt_layer7.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.0.24/net/netfilter/xt_layer7.c 2012-03-20 01:44:50.907527097 +0100
+@@ -0,0 +1,684 @@
++/*
++ Kernel module to match application layer (OSI layer 7) data in connections.
++
++ http://l7-filter.sf.net
++
++ (C) 2003-2009 Matthew Strait and Ethan Sommer.
++
++ This program is free software; you can redistribute it and/or
++ modify it under the terms of the GNU General Public License
++ as published by the Free Software Foundation; either version
++ 2 of the License, or (at your option) any later version.
++ http://www.gnu.org/licenses/gpl.txt
++
++ Based on ipt_string.c (C) 2000 Emmanuel Roger <winfield@freegates.be>,
++ xt_helper.c (C) 2002 Harald Welte and cls_layer7.c (C) 2003 Matthew Strait,
++ Ethan Sommer, Justin Levandoski.
++*/
++
++#include <linux/spinlock.h>
++#include <linux/version.h>
++#include <net/ip.h>
++#include <net/tcp.h>
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter.h>
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_core.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
++#include <net/netfilter/nf_conntrack_extend.h>
++#include <net/netfilter/nf_conntrack_acct.h>
++#endif
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_layer7.h>
++#include <linux/ctype.h>
++#include <linux/proc_fs.h>
++
++#include "regexp/regexp.c"
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Matthew Strait <quadong@users.sf.net>, Ethan Sommer <sommere@users.sf.net>");
++MODULE_DESCRIPTION("iptables application layer match module");
++MODULE_ALIAS("ipt_layer7");
++MODULE_VERSION("2.22ipfire");
++
++static int maxdatalen = 2048; // this is the default
++module_param(maxdatalen, int, 0444);
++MODULE_PARM_DESC(maxdatalen, "maximum bytes of data looked at by l7-filter");
++#ifdef CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG
++ #define DPRINTK(format,args...) printk(format,##args)
++#else
++ #define DPRINTK(format,args...)
++#endif
++
++/* Number of packets whose data we look at.
++This can be modified through /proc/net/layer7_numpackets */
++static int num_packets = 10;
++
++static struct pattern_cache {
++ char * regex_string;
++ regexp * pattern;
++ struct pattern_cache * next;
++} * first_pattern_cache = NULL;
++
++DEFINE_SPINLOCK(l7_lock);
++
++static int total_acct_packets(struct nf_conn *ct)
++{
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 26)
++ BUG_ON(ct == NULL);
++ return (ct->counters[IP_CT_DIR_ORIGINAL].packets + ct->counters[IP_CT_DIR_REPLY].packets);
++#else
++ struct nf_conn_counter *acct;
++
++ BUG_ON(ct == NULL);
++ acct = nf_conn_acct_find(ct);
++ if (!acct)
++ return 0;
++ return (acct[IP_CT_DIR_ORIGINAL].packets + acct[IP_CT_DIR_REPLY].packets);
++#endif
++}
++
++#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++/* Converts an unfriendly string into a friendly one by
++replacing unprintables with periods and all whitespace with " ". */
++static char * friendly_print(unsigned char * s)
++{
++ char * f = kmalloc(strlen(s) + 1, GFP_ATOMIC);
++ int i;
++
++ if(!f) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "friendly_print, bailing.\n");
++ return NULL;
++ }
++
++ for(i = 0; i < strlen(s); i++){
++ if(isprint(s[i]) && s[i] < 128) f[i] = s[i];
++ else if(isspace(s[i])) f[i] = ' ';
++ else f[i] = '.';
++ }
++ f[i] = '\0';
++ return f;
++}
++
++static char dec2hex(int i)
++{
++ switch (i) {
++ case 0 ... 9:
++ return (i + '0');
++ break;
++ case 10 ... 15:
++ return (i - 10 + 'a');
++ break;
++ default:
++ if (net_ratelimit())
++ printk("layer7: Problem in dec2hex\n");
++ return '\0';
++ }
++}
++
++static char * hex_print(unsigned char * s)
++{
++ char * g = kmalloc(strlen(s)*3 + 1, GFP_ATOMIC);
++ int i;
++
++ if(!g) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in hex_print, "
++ "bailing.\n");
++ return NULL;
++ }
++
++ for(i = 0; i < strlen(s); i++) {
++ g[i*3 ] = dec2hex(s[i]/16);
++ g[i*3 + 1] = dec2hex(s[i]%16);
++ g[i*3 + 2] = ' ';
++ }
++ g[i*3] = '\0';
++
++ return g;
++}
++#endif // DEBUG
++
++/* Use instead of regcomp. As we expect to be seeing the same regexps over and
++over again, it make sense to cache the results. */
++static regexp * compile_and_cache(const char * regex_string,
++ const char * protocol)
++{
++ struct pattern_cache * node = first_pattern_cache;
++ struct pattern_cache * last_pattern_cache = first_pattern_cache;
++ struct pattern_cache * tmp;
++ unsigned int len;
++
++ while (node != NULL) {
++ if (!strcmp(node->regex_string, regex_string))
++ return node->pattern;
++
++ last_pattern_cache = node;/* points at the last non-NULL node */
++ node = node->next;
++ }
++
++ /* If we reach the end of the list, then we have not yet cached
++ the pattern for this regex. Let's do that now.
++ Be paranoid about running out of memory to avoid list corruption. */
++ tmp = kmalloc(sizeof(struct pattern_cache), GFP_ATOMIC);
++
++ if(!tmp) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "compile_and_cache, bailing.\n");
++ return NULL;
++ }
++
++ tmp->regex_string = kmalloc(strlen(regex_string) + 1, GFP_ATOMIC);
++ tmp->pattern = kmalloc(sizeof(struct regexp), GFP_ATOMIC);
++ tmp->next = NULL;
++
++ if(!tmp->regex_string || !tmp->pattern) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "compile_and_cache, bailing.\n");
++ kfree(tmp->regex_string);
++ kfree(tmp->pattern);
++ kfree(tmp);
++ return NULL;
++ }
++
++ /* Ok. The new node is all ready now. */
++ node = tmp;
++
++ if(first_pattern_cache == NULL) /* list is empty */
++ first_pattern_cache = node; /* make node the beginning */
++ else
++ last_pattern_cache->next = node; /* attach node to the end */
++
++ /* copy the string and compile the regex */
++ len = strlen(regex_string);
++ DPRINTK("layer7: about to compile this: \"%s\"\n", regex_string);
++ node->pattern = regcomp((char *)regex_string, &len);
++ if ( !node->pattern ) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: Error compiling regexp "
++ "\"%s\" (%s)\n",
++ regex_string, protocol);
++ /* pattern is now cached as NULL, so we won't try again. */
++ }
++
++ strcpy(node->regex_string, regex_string);
++ return node->pattern;
++}
++
++static int can_handle(const struct sk_buff *skb)
++{
++ if(!ip_hdr(skb)) /* not IP */
++ return 0;
++ if(ip_hdr(skb)->protocol != IPPROTO_TCP &&
++ ip_hdr(skb)->protocol != IPPROTO_UDP &&
++ ip_hdr(skb)->protocol != IPPROTO_ICMP)
++ return 0;
++ return 1;
++}
++
++/* Returns offset the into the skb->data that the application data starts */
++static int app_data_offset(const struct sk_buff *skb)
++{
++ /* In case we are ported somewhere (ebtables?) where ip_hdr(skb)
++ isn't set, this can be gotten from 4*(skb->data[0] & 0x0f) as well. */
++ int ip_hl = 4*ip_hdr(skb)->ihl;
++
++ if( ip_hdr(skb)->protocol == IPPROTO_TCP ) {
++ /* 12 == offset into TCP header for the header length field.
++ Can't get this with skb->h.th->doff because the tcphdr
++ struct doesn't get set when routing (this is confirmed to be
++ true in Netfilter as well as QoS.) */
++ int tcp_hl = 4*(skb->data[ip_hl + 12] >> 4);
++
++ return ip_hl + tcp_hl;
++ } else if( ip_hdr(skb)->protocol == IPPROTO_UDP ) {
++ return ip_hl + 8; /* UDP header is always 8 bytes */
++ } else if( ip_hdr(skb)->protocol == IPPROTO_ICMP ) {
++ return ip_hl + 8; /* ICMP header is 8 bytes */
++ } else {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: tried to handle unknown "
++ "protocol!\n");
++ return ip_hl + 8; /* something reasonable */
++ }
++}
++
++/* handles whether there's a match when we aren't appending data anymore */
++static int match_no_append(struct nf_conn * conntrack,
++ struct nf_conn * master_conntrack,
++ enum ip_conntrack_info ctinfo,
++ enum ip_conntrack_info master_ctinfo,
++ const struct xt_layer7_info * info)
++{
++ /* If we're in here, throw the app data away */
++ if(master_conntrack->layer7.app_data != NULL) {
++
++ #ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++ if(!master_conntrack->layer7.app_proto) {
++ char * f =
++ friendly_print(master_conntrack->layer7.app_data);
++ char * g =
++ hex_print(master_conntrack->layer7.app_data);
++ DPRINTK("\nl7-filter gave up after %d bytes "
++ "(%d packets):\n%s\n",
++ strlen(f), total_acct_packets(master_conntrack), f);
++ kfree(f);
++ DPRINTK("In hex: %s\n", g);
++ kfree(g);
++ }
++ #endif
++
++ kfree(master_conntrack->layer7.app_data);
++ master_conntrack->layer7.app_data = NULL; /* don't free again */
++ }
++
++ if(master_conntrack->layer7.app_proto){
++ /* Here child connections set their .app_proto (for /proc) */
++ if(!conntrack->layer7.app_proto) {
++ conntrack->layer7.app_proto =
++ kmalloc(strlen(master_conntrack->layer7.app_proto)+1,
++ GFP_ATOMIC);
++ if(!conntrack->layer7.app_proto){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory "
++ "in match_no_append, "
++ "bailing.\n");
++ return 1;
++ }
++ strcpy(conntrack->layer7.app_proto,
++ master_conntrack->layer7.app_proto);
++ }
++
++ return (!strcmp(master_conntrack->layer7.app_proto,
++ info->protocol));
++ }
++ else {
++ /* If not classified, set to "unknown" to distinguish from
++ connections that are still being tested. */
++ master_conntrack->layer7.app_proto =
++ kmalloc(strlen("unknown")+1, GFP_ATOMIC);
++ if(!master_conntrack->layer7.app_proto){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "match_no_append, bailing.\n");
++ return 1;
++ }
++ strcpy(master_conntrack->layer7.app_proto, "unknown");
++ return 0;
++ }
++}
++
++/* add the new app data to the conntrack. Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++ char * app_data, int appdatalen)
++{
++ int length = 0, i;
++ int oldlength = master_conntrack->layer7.app_data_len;
++
++ /* This is a fix for a race condition by Deti Fliegl. However, I'm not
++ clear on whether the race condition exists or whether this really
++ fixes it. I might just be being dense... Anyway, if it's not really
++ a fix, all it does is waste a very small amount of time. */
++ if(!master_conntrack->layer7.app_data) return 0;
++
++ /* Strip nulls. Make everything lower case (our regex lib doesn't
++ do case insensitivity). Add it to the end of the current data. */
++ for(i = 0; i < maxdatalen-oldlength-1 &&
++ i < appdatalen; i++) {
++ if(app_data[i] != '\0') {
++ /* the kernel version of tolower mungs 'upper ascii' */
++ master_conntrack->layer7.app_data[length+oldlength] =
++ isascii(app_data[i])?
++ tolower(app_data[i]) : app_data[i];
++ length++;
++ }
++ }
++
++ master_conntrack->layer7.app_data[length+oldlength] = '\0';
++ master_conntrack->layer7.app_data_len = length + oldlength;
++
++ return length;
++}
++
++/* taken from drivers/video/modedb.c */
++static int my_atoi(const char *s)
++{
++ int val = 0;
++
++ for (;; s++) {
++ switch (*s) {
++ case '0'...'9':
++ val = 10*val+(*s-'0');
++ break;
++ default:
++ return val;
++ }
++ }
++}
++
++/* write out num_packets to userland. */
++static int layer7_read_proc(char* page, char ** start, off_t off, int count,
++ int* eof, void * data)
++{
++ if(num_packets > 99 && net_ratelimit())
++ printk(KERN_ERR "layer7: NOT REACHED. num_packets too big\n");
++
++ page[0] = num_packets/10 + '0';
++ page[1] = num_packets%10 + '0';
++ page[2] = '\n';
++ page[3] = '\0';
++
++ *eof=1;
++
++ return 3;
++}
++
++/* Read in num_packets from userland */
++static int layer7_write_proc(struct file* file, const char* buffer,
++ unsigned long count, void *data)
++{
++ char * foo = kmalloc(count, GFP_ATOMIC);
++
++ if(!foo){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory, bailing. "
++ "num_packets unchanged.\n");
++ return count;
++ }
++
++ if(copy_from_user(foo, buffer, count)) {
++ return -EFAULT;
++ }
++
++
++ num_packets = my_atoi(foo);
++ kfree (foo);
++
++ /* This has an arbitrary limit to make the math easier. I'm lazy.
++ But anyway, 99 is a LOT! If you want more, you're doing it wrong! */
++ if(num_packets > 99) {
++ printk(KERN_WARNING "layer7: num_packets can't be > 99.\n");
++ num_packets = 99;
++ } else if(num_packets < 1) {
++ printk(KERN_WARNING "layer7: num_packets can't be < 1.\n");
++ num_packets = 1;
++ }
++
++ return count;
++}
++
++static bool
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
++match(const struct sk_buff *skbin, struct xt_action_param *par)
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++match(const struct sk_buff *skbin, const struct xt_match_param *par)
++#else
++match(const struct sk_buff *skbin,
++ const struct net_device *in,
++ const struct net_device *out,
++ const struct xt_match *match,
++ const void *matchinfo,
++ int offset,
++ unsigned int protoff,
++ bool *hotdrop)
++#endif
++{
++ /* sidestep const without getting a compiler warning... */
++ struct sk_buff * skb = (struct sk_buff *)skbin;
++
++ const struct xt_layer7_info * info =
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++ par->matchinfo;
++ #else
++ matchinfo;
++ #endif
++
++ enum ip_conntrack_info master_ctinfo, ctinfo;
++ struct nf_conn *master_conntrack, *conntrack;
++ unsigned char * app_data;
++ unsigned int pattern_result, appdatalen;
++ regexp * comppattern;
++
++ /* Be paranoid/incompetent - lock the entire match function. */
++ spin_lock_bh(&l7_lock);
++
++ if(!can_handle(skb)){
++ DPRINTK("layer7: This is some protocol I can't handle.\n");
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++
++ /* Treat parent & all its children together as one connection, except
++ for the purpose of setting conntrack->layer7.app_proto in the actual
++ connection. This makes /proc/net/ip_conntrack more satisfying. */
++ if(!(conntrack = nf_ct_get(skb, &ctinfo)) ||
++ !(master_conntrack=nf_ct_get(skb,&master_ctinfo))){
++ DPRINTK("layer7: couldn't get conntrack.\n");
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++
++ /* Try to get a master conntrack (and its master etc) for FTP, etc. */
++ while (master_ct(master_conntrack) != NULL)
++ master_conntrack = master_ct(master_conntrack);
++
++ /* if we've classified it or seen too many packets */
++ if(total_acct_packets(master_conntrack) > num_packets ||
++ master_conntrack->layer7.app_proto) {
++
++ pattern_result = match_no_append(conntrack, master_conntrack,
++ ctinfo, master_ctinfo, info);
++
++ /* skb->cb[0] == seen. Don't do things twice if there are
++ multiple l7 rules. I'm not sure that using cb for this purpose
++ is correct, even though it says "put your private variables
++ there". But it doesn't look like it is being used for anything
++ else in the skbs that make it here. */
++ skb->cb[0] = 1; /* marking it seen here's probably irrelevant */
++
++ spin_unlock_bh(&l7_lock);
++ return (pattern_result ^ info->invert);
++ }
++
++ if(skb_is_nonlinear(skb)){
++ if(skb_linearize(skb) != 0){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: failed to linearize "
++ "packet, bailing.\n");
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++ }
++
++ /* now that the skb is linearized, it's safe to set these. */
++ app_data = skb->data + app_data_offset(skb);
++ appdatalen = skb_tail_pointer(skb) - app_data;
++
++ /* the return value gets checked later, when we're ready to use it */
++ comppattern = compile_and_cache(info->pattern, info->protocol);
++
++ /* On the first packet of a connection, allocate space for app data */
++ if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] &&
++ !master_conntrack->layer7.app_data){
++ master_conntrack->layer7.app_data =
++ kmalloc(maxdatalen, GFP_ATOMIC);
++ if(!master_conntrack->layer7.app_data){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "match, bailing.\n");
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++
++ master_conntrack->layer7.app_data[0] = '\0';
++ }
++
++ /* Can be here, but unallocated, if numpackets is increased near
++ the beginning of a connection */
++ if(master_conntrack->layer7.app_data == NULL){
++ spin_unlock_bh(&l7_lock);
++ return info->invert; /* unmatched */
++ }
++
++ if(!skb->cb[0]){
++ int newbytes;
++ newbytes = add_data(master_conntrack, app_data, appdatalen);
++
++ if(newbytes == 0) { /* didn't add any data */
++ skb->cb[0] = 1;
++ /* Didn't match before, not going to match now */
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++ }
++
++ /* If looking for "unknown", then never match. "Unknown" means that
++ we've given up; we're still trying with these packets. */
++ if(!strcmp(info->protocol, "unknown")) {
++ pattern_result = 0;
++ /* If looking for "unset", then always match. "Unset" means that we
++ haven't yet classified the connection. */
++ } else if(!strcmp(info->protocol, "unset")) {
++ pattern_result = 2;
++ DPRINTK("layer7: matched unset: not yet classified "
++ "(%d/%d packets)\n",
++ total_acct_packets(master_conntrack), num_packets);
++ /* If the regexp failed to compile, don't bother running it */
++ } else if(comppattern &&
++ regexec(comppattern, master_conntrack->layer7.app_data)){
++ DPRINTK("layer7: matched %s\n", info->protocol);
++ pattern_result = 1;
++ } else pattern_result = 0;
++
++ if(pattern_result == 1) {
++ master_conntrack->layer7.app_proto =
++ kmalloc(strlen(info->protocol)+1, GFP_ATOMIC);
++ if(!master_conntrack->layer7.app_proto){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "match, bailing.\n");
++ spin_unlock_bh(&l7_lock);
++ return (pattern_result ^ info->invert);
++ }
++ strcpy(master_conntrack->layer7.app_proto, info->protocol);
++ } else if(pattern_result > 1) { /* cleanup from "unset" */
++ pattern_result = 1;
++ }
++
++ /* mark the packet seen */
++ skb->cb[0] = 1;
++
++ spin_unlock_bh(&l7_lock);
++ return (pattern_result ^ info->invert);
++}
++
++// load nf_conntrack_ipv4
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
++static int
++#else
++static bool
++#endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++check(const struct xt_mtchk_param *par)
++{
++ if (nf_ct_l3proto_try_module_get(par->match->family) < 0) {
++ printk(KERN_WARNING "can't load conntrack support for "
++ "proto=%d\n", par->match->family);
++#else
++check(const char *tablename, const void *inf,
++ const struct xt_match *match, void *matchinfo,
++ unsigned int hook_mask)
++{
++ if (nf_ct_l3proto_try_module_get(match->family) < 0) {
++ printk(KERN_WARNING "can't load conntrack support for "
++ "proto=%d\n", match->family);
++#endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
++ return -EINVAL;
++ }
++ return 0;
++#else
++ return 0;
++ }
++ return 1;
++#endif
++}
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++ static void destroy(const struct xt_mtdtor_param *par)
++ {
++ nf_ct_l3proto_module_put(par->match->family);
++ }
++#else
++ static void destroy(const struct xt_match *match, void *matchinfo)
++ {
++ nf_ct_l3proto_module_put(match->family);
++ }
++#endif
++
++static struct xt_match xt_layer7_match[] __read_mostly = {
++{
++ .name = "layer7",
++ .family = AF_INET,
++ .checkentry = check,
++ .match = match,
++ .destroy = destroy,
++ .matchsize = sizeof(struct xt_layer7_info),
++ .me = THIS_MODULE
++}
++};
++
++static void layer7_cleanup_proc(void)
++{
++ remove_proc_entry("layer7_numpackets", init_net.proc_net);
++}
++
++/* register the proc file */
++static void layer7_init_proc(void)
++{
++ struct proc_dir_entry* entry;
++ entry = create_proc_entry("layer7_numpackets", 0644, init_net.proc_net);
++ entry->read_proc = layer7_read_proc;
++ entry->write_proc = layer7_write_proc;
++}
++
++static int __init xt_layer7_init(void)
++{
++ need_conntrack();
++
++ if (init_net.ct.sysctl_acct == 0) {
++ printk(KERN_WARNING "layer7: enabling nf_conntrack_acct\n");
++ init_net.ct.sysctl_acct = 1;
++ }
++
++ layer7_init_proc();
++ if(maxdatalen < 1) {
++ printk(KERN_WARNING "layer7: maxdatalen can't be < 1, "
++ "using 1\n");
++ maxdatalen = 1;
++ }
++ /* This is not a hard limit. It's just here to prevent people from
++ bringing their slow machines to a grinding halt. */
++ else if(maxdatalen > 65536) {
++ printk(KERN_WARNING "layer7: maxdatalen can't be > 65536, "
++ "using 65536\n");
++ maxdatalen = 65536;
++ }
++ return xt_register_matches(xt_layer7_match,
++ ARRAY_SIZE(xt_layer7_match));
++}
++
++static void __exit xt_layer7_fini(void)
++{
++ layer7_cleanup_proc();
++ xt_unregister_matches(xt_layer7_match, ARRAY_SIZE(xt_layer7_match));
++}
++
++module_init(xt_layer7_init);
++module_exit(xt_layer7_fini);
--- /dev/null
+diff -Naur udev-125.org/extras/volume_id/lib/ext.c udev-125/extras/volume_id/lib/ext.c
+--- udev-125.org/extras/volume_id/lib/ext.c 2008-07-18 16:26:55.000000000 +0200
++++ udev-125/extras/volume_id/lib/ext.c 2012-06-25 00:52:40.976563010 +0200
+@@ -160,32 +160,31 @@
+ goto found;
+ }
+
+- /* has journal */
+- if ((feature_compat & EXT3_FEATURE_COMPAT_HAS_JOURNAL) != 0) {
+- /* "use on development code" is ext4dev */
+- if ((flags & EXT2_FLAGS_TEST_FILESYS) != 0) {
+- id->type = "ext4dev";
+- goto found;
+- }
++ /* "use on development code" is ext4dev */
++ if ((flags & EXT2_FLAGS_TEST_FILESYS) != 0) {
++ id->type = "ext4dev";
++ goto found;
++ }
+
+- /* incompatible ext3 features is ext4 */
+- if ((feature_ro_compat & EXT3_FEATURE_RO_COMPAT_UNSUPPORTED) != 0 ||
+- (feature_incompat & EXT3_FEATURE_INCOMPAT_UNSUPPORTED) != 0) {
+- id->type = "ext4";
+- goto found;
+- }
++ /* incompatible ext3 features is ext4 */
++ if ((feature_ro_compat & EXT3_FEATURE_RO_COMPAT_UNSUPPORTED) != 0 ||
++ (feature_incompat & EXT3_FEATURE_INCOMPAT_UNSUPPORTED) != 0) {
++ id->type = "ext4";
++ goto found;
++ }
+
++ /* has journal */
++ if ((feature_compat & EXT3_FEATURE_COMPAT_HAS_JOURNAL) != 0) {
+ id->type = "ext3";
+ goto found;
+ } else {
+- /* no incompatible ext2 feature is ext2 */
++ /* no incompatible ext2 feature is ext2 */
+ if ((feature_ro_compat & EXT2_FEATURE_RO_COMPAT_UNSUPPORTED) == 0 &&
+ (feature_incompat & EXT2_FEATURE_INCOMPAT_UNSUPPORTED) == 0) {
+ id->type = "ext2";
+ goto found;
+ }
+ }
+-
+ return -1;
+
+ found:
CXXFLAGS="-O2 -march=i586 -pipe -fomit-frame-pointer"
C2FLAGS="-O2 -march=i586 -mtune=i586 -pipe -fomit-frame-pointer"
CXX2FLAGS="-O2 -march=i586 -mtune=i586 -pipe -fomit-frame-pointer"
-elif [ 'armv5tejl' = $MACHINE -o 'armv5tel' = $MACHINE -o 'armv7l' = $MACHINE ]; then
+elif [ 'armv5tejl' = $MACHINE -o 'armv5tel' = $MACHINE -o 'armv6l' = $MACHINE -o 'armv7l' = $MACHINE ]; then
echo "`date -u '+%b %e %T'`: Machine is ARM (or equivalent)" >> $LOGFILE
MACHINE=armv5tel
MACHINE_TYPE=arm
projects / people / teissler / ipfire-2.x.git / commitdiff
