. /opt/pakfire/lib/functions.sh
/usr/local/bin/backupctrl exclude >/dev/null 2>&1
+function add_to_backup ()
+{
+ # Add path to ROOTFILES but remove old entries to prevent double
+ # files in the tar
+ grep -v "^$1" /opt/pakfire/tmp/ROOTFILES > /opt/pakfire/tmp/ROOTFILES.tmp
+ mv /opt/pakfire/tmp/ROOTFILES.tmp /opt/pakfire/tmp/ROOTFILES
+ echo $1 >> /opt/pakfire/tmp/ROOTFILES
+}
+
#
# Remove old core updates from pakfire cache to save space...
-core=74
+core=76
for (( i=1; i<=$core; i++ ))
do
rm -f /var/cache/pakfire/core-upgrade-*-$i.ipfire
done
+#
+# Do some sanity checks.
+case $(uname -r) in
+ *-ipfire-versatile )
+ /usr/bin/logger -p syslog.emerg -t ipfire \
+ "core-update-$core: ERROR cannot update. versatile support is dropped."
+ # Report no error to pakfire. So it does not try to install it again.
+ exit 0
+ ;;
+ *-ipfire-xen )
+ BOOTSIZE=`df /boot -Pk | sed "s| * | |g" | cut -d" " -f2 | tail -n 1`
+ if [ $BOOTSIZE -lt 28000 ]; then
+ /usr/bin/logger -p syslog.emerg -t ipfire \
+ "core-update-$core: ERROR cannot update because not enough space on boot."
+ exit 2
+ fi
+ ;;
+ *-ipfire* )
+ # Ok.
+ ;;
+ * )
+ /usr/bin/logger -p syslog.emerg -t ipfire \
+ "core-update-$core: ERROR cannot update. No IPFire Kernel."
+ exit 1
+ ;;
+esac
+
+
+#
+#
+KVER="3.10.25"
+MOUNT=`grep "kernel" /boot/grub/grub.conf 2>/dev/null | tail -n 1 `
+# Nur den letzten Parameter verwenden
+echo $MOUNT > /dev/null
+MOUNT=$_
+if [ ! $MOUNT == "rw" ]; then
+ MOUNT="ro"
+fi
+
+#
+# check if we the backup file already exist
+if [ -e /var/ipfire/backup/core-upgrade$core_$KVER.tar.xz ]; then
+ echo Moving backup to backup-old ...
+ mv -f /var/ipfire/backup/core-upgrade$core_$KVER.tar.xz \
+ /var/ipfire/backup/core-upgrade$core_$KVER-old.tar.xz
+fi
+echo First we made a backup of all files that was inside of the
+echo update archive. This may take a while ...
+# Add some files that are not in the package to backup
+add_to_backup lib/modules
+add_to_backup etc/udev
+add_to_backup lib/udev
+add_to_backup boot
+add_to_backup etc/sysconfig/lm_sensors
+add_to_backup etc/sysconfig/rc.local
+add_to_backup srv/web/ipfire/html/themes/ipfire
+add_to_backup usr/lib/engines
+add_to_backup etc/rc.d/init.d/networking/red.up/22-outgoingfwctrl
+add_to_backup etc/rc.d/init.d/networking/red.up/25-portfw
+add_to_backup etc/rc.d/init.d/networking/red.up/26-xtaccess
+add_to_backup usr/local/bin/setportfw
+add_to_backup usr/local/bin/setdmzholes
+add_to_backup usr/local/bin/setxtaccess
+add_to_backup usr/local/bin/outgoingfwctrl
+add_to_backup srv/web/ipfire/cgi-bin/{dmzholes,outgoingfw,portfw,xtaccess}.cgi
+add_to_backup var/ipfire/{dmzholes,portfw,outgoing,xtaccess}
+
+# Backup the files
+tar cJvf /var/ipfire/backup/core-upgrade$core_$KVER.tar.xz \
+ -C / -T /opt/pakfire/tmp/ROOTFILES --exclude='#*' --exclude='/var/cache' > /dev/null 2>&1
+
+# Check diskspace on root
+ROOTSPACE=`df / -Pk | sed "s| * | |g" | cut -d" " -f4 | tail -n 1`
+
+if [ $ROOTSPACE -lt 70000 ]; then
+ /usr/bin/logger -p syslog.emerg -t ipfire \
+ "core-update-$core: ERROR cannot update because not enough free space on root."
+ exit 2
+fi
+
+
+echo
+echo Update Kernel to $KVER ...
+#
+# Remove old kernel, configs, initrd, modules ...
+#
+rm -rf /boot/System.map-*
+rm -rf /boot/config-*
+rm -rf /boot/ipfirerd-*
+rm -rf /boot/vmlinuz-*
+rm -rf /boot/uImage-ipfire-*
+rm -rf /boot/uInit-ipfire-*
+rm -rf /lib/modules
+
+#
+# Remove old udev rules.
+#
+if [ -e /etc/udev/rules.d/29-ct-server-network.rules ]; then
+ cp /etc/udev/rules.d/29-ct-server-network.rules /tmp/
+fi
+cp /etc/udev/rules.d/30-persistent-network.rules /tmp/
+rm -rf /etc/udev
+rm -rf /lib/udev
+mkdir -p /etc/udev/rules.d
+if [ -e /tmp/rules.d/29-ct-server-network.rules ]; then
+ mv /tmp/29-ct-server-network.rules /etc/udev/rules.d/
+fi
+mv /tmp/30-persistent-network.rules /etc/udev/rules.d/
+
+case $(uname -m) in
+ i?86 )
+ #
+ # Backup grub.conf
+ #
+ cp -vf /boot/grub/grub.conf /boot/grub/grub.conf.org
+ ;;
+esac
+#
+#Stop services
+/etc/init.d/snort stop
+/etc/init.d/squid stop
+/etc/init.d/ipsec stop
+/etc/init.d/apache stop
+
# Remove the old default theme
rm -rf /srv/web/ipfire/html/themes/ipfire
-# Stop services
+#
+#Extract files
+tar xavf /opt/pakfire/tmp/files* --no-overwrite-dir -p --numeric-owner -C /
+# Check diskspace on boot
+BOOTSPACE=`df /boot -Pk | sed "s| * | |g" | cut -d" " -f4 | tail -n 1`
-# Extract files
-extract_files
+if [ $BOOTSPACE -lt 1000 ]; then
+ case $(uname -r) in
+ *-ipfire-kirkwood )
+ # Special handling for old kirkwood images.
+ # (install only kirkwood kernel)
+ rm -rf /boot/*
+ tar xavf /opt/pakfire/tmp/files* --no-overwrite-dir -p \
+ --numeric-owner -C / --wildcards 'boot/*-kirkwood*'
+ ;;
+ * )
+ /usr/bin/logger -p syslog.emerg -t ipfire \
+ "core-update-$core: FATAL-ERROR space run out on boot. System is not bootable..."
+ /etc/init.d/apache start
+ exit 4
+ ;;
+ esac
+fi
-# Start services
+#
+#Reload init to close old linker/glibc
+telinit u
+# Regenerate ipsec configuration files.
+/srv/web/ipfire/cgi-bin/vpnmain.cgi
# Update Language cache
perl -e "require '/var/ipfire/lang.pl'; &Lang::BuildCacheLang"
# Remove old firewall configuration files
rm -rf /var/ipfire/{dmzholes,portfw,outgoing,xtaccess}
-sync
+#
+# Start services
+#
+/etc/init.d/apache start
+/etc/init.d/squid start
+/etc/init.d/snort start
+if [ `grep "ENABLED=on" /var/ipfire/vpn/settings` ]; then
+ /etc/init.d/ipsec start
+fi
+
+#
+# Rebuild qosscript if enabled
+#
+if [ -e /var/ipfire/qos/enable ]; then
+ /usr/local/bin/qosctrl stop
+ /usr/local/bin/qosctrl generate
+ /usr/local/bin/qosctrl start
+fi
+
+
+case $(uname -m) in
+ i?86 )
+ #
+ # Modify grub.conf
+ #
+ echo
+ echo Update grub configuration ...
+ ROOT=`mount | grep " / " | cut -d" " -f1`
+
+ if [ ! -z $ROOT ]; then
+ ROOTUUID=`blkid -c /dev/null -sUUID $ROOT | cut -d'"' -f2`
+ fi
+
+ if [ ! -z $ROOTUUID ]; then
+ sed -i "s|ROOT|UUID=$ROOTUUID|g" /boot/grub/grub.conf
+ else
+ sed -i "s|ROOT|$ROOT|g" /boot/grub/grub.conf
+ fi
+ sed -i "s|KVER|$KVER|g" /boot/grub/grub.conf
+ sed -i "s|MOUNT|$MOUNT|g" /boot/grub/grub.conf
+
+ if [ "$(grep "^serial" /boot/grub/grub.conf.org)" == "" ]; then
+ echo "grub use default console ..."
+ else
+ echo "grub use serial console ..."
+ sed -i -e "s|splashimage|#splashimage|g" /boot/grub/grub.conf
+ sed -i -e "s|#serial|serial|g" /boot/grub/grub.conf
+ sed -i -e "s|#terminal|terminal|g" /boot/grub/grub.conf
+ sed -i -e "s| panic=10 | console=ttyS0,115200n8 panic=10 |g" /boot/grub/grub.conf
+ fi
+
+ #
+ # ReInstall grub
+ #
+ echo "(hd0) ${ROOT::`expr length $ROOT`-1}" > /boot/grub/device.map
+ grub-install --no-floppy ${ROOT::`expr length $ROOT`-1}
+ ;;
+esac
+#
+# Delete old lm-sensor modullist to force search at next boot
+#
+rm -rf /etc/sysconfig/lm_sensors
+
+
+# Force (re)install pae kernel if pae is supported
+rm -rf /opt/pakfire/db/*/meta-linux-pae
+if [ ! "$(grep "^flags.* pae " /proc/cpuinfo)" == "" ]; then
+ ROOTSPACE=`df / -Pk | sed "s| * | |g" | cut -d" " -f4 | tail -n 1`
+ BOOTSPACE=`df /boot -Pk | sed "s| * | |g" | cut -d" " -f4 | tail -n 1`
+ if [ $BOOTSPACE -lt 8000 -o $ROOTSPACE -lt 70000 ]; then
+ /usr/bin/logger -p syslog.emerg -t ipfire \
+ "core-update-$core: WARNING not enough space for pae kernel."
+ else
+ echo "Name: linux-pae" > /opt/pakfire/db/installed/meta-linux-pae
+ echo "ProgVersion: 3.10.24" >> /opt/pakfire/db/installed/meta-linux-pae
+ echo "Release: 30" >> /opt/pakfire/db/installed/meta-linux-pae
+ fi
+fi
+
+# Force reinstall xen kernel if it was installed
+if [ -e "/opt/pakfire/db/installed/meta-linux-xen" ]; then
+ echo "Name: linux-xen" > /opt/pakfire/db/installed/meta-linux-xen
+ echo "ProgVersion: 2.6.32.60" >> /opt/pakfire/db/installed/meta-linux-xen
+ echo "Release: 24" >> /opt/pakfire/db/installed/meta-linux-xen
+ # Add xvc0 to /etc/securetty
+ echo "xvc0" >> /etc/securetty
+fi
+
+#
+# After pakfire has ended run it again and update the lists and do upgrade
+#
+echo '#!/bin/bash' > /tmp/pak_update
+echo 'while [ "$(ps -A | grep " update.sh")" != "" ]; do' >> /tmp/pak_update
+echo ' sleep 1' >> /tmp/pak_update
+echo 'done' >> /tmp/pak_update
+echo 'while [ "$(ps -A | grep " pakfire")" != "" ]; do' >> /tmp/pak_update
+echo ' sleep 1' >> /tmp/pak_update
+echo 'done' >> /tmp/pak_update
+echo '/opt/pakfire/pakfire update -y --force' >> /tmp/pak_update
+echo '/opt/pakfire/pakfire upgrade -y' >> /tmp/pak_update
+echo '/opt/pakfire/pakfire upgrade -y' >> /tmp/pak_update
+echo '/opt/pakfire/pakfire upgrade -y' >> /tmp/pak_update
+echo '/usr/bin/logger -p syslog.emerg -t ipfire "Core-upgrade finished. If you use a customized grub.cfg"' >> /tmp/pak_update
+echo '/usr/bin/logger -p syslog.emerg -t ipfire "Check it before reboot !!!"' >> /tmp/pak_update
+echo '/usr/bin/logger -p syslog.emerg -t ipfire " *** Please reboot... *** "' >> /tmp/pak_update
+echo 'touch /var/run/need_reboot ' >> /tmp/pak_update
+#
+chmod +x /tmp/pak_update
+/tmp/pak_update &
-# This update need a reboot...
-touch /var/run/need_reboot
+sync
-# Finish
-# Update the fireinfo profile
+#
+#Finish
(
/etc/init.d/fireinfo start
sendprofile
) >/dev/null 2>&1 &
+echo
+echo Please wait until pakfire has ended...
+echo
+#Don't report the exitcode last command
exit 0
+
projects / people / teissler / ipfire-2.x.git / commitdiff
