H.J. Lu [Mon, 20 Jul 2020 11:53:58 +0000 (04:53 -0700)]
x86: Update PR gas/26263 linker tests
Update and run PR gas/26263 linker tests for all x86 ELF targets to
accept any program header layout.
PR gas/26263
* testsuite/ld-i386/pr26263.d: Updated.
* testsuite/ld-x86-64/pr26263.d: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run gas/26263 test for all ELF
targets.
H.J. Lu [Sun, 19 Jul 2020 13:51:19 +0000 (06:51 -0700)]
x86: Change PLT32 reloc against section to PC32
Commit 292676c1 resolved PLT32 reloc aganst local symbol to section.
Since PLT32 relocation must be against symbols, turn such PLT32
relocation into PC32 relocation.
gas/
PR gas/26263
* config/tc-i386.c (i386_validate_fix): Change PLT32 reloc
against section to PC32 reloc.
* testsuite/gas/i386/relax-5.d: Updated.
* testsuite/gas/i386/x86-64-relax-4.d: Likewise.
Alan Modra [Fri, 17 Jul 2020 07:17:28 +0000 (16:47 +0930)]
Power10 stub selection
This patch better supports mixing of power10 and non-power10 code,
as might be seen in a cpu-optimized library using ifuncs to select
functions optimized for a given cpu. Using -Wl,--no-power10-stubs
isn't that good in this situation since non-power10 notoc stubs are
slower and larger than the power10 variants, which you'd like to use
on power10 code paths.
With this change, power10 pc-relative code that makes calls marked
@notoc uses power10 stubs if stubs are necessary, and other calls use
non-power10 instructions in stubs. This will mean that if gcc is
generating code for -mcpu=power10 but with pc-rel disabled then you'll
get the older stubs even on power10 (unless you force with
-Wl,--power10-stubs). That shouldn't be too big a problem: stubs that
use r2 are reasonable. It's just the ones that set up addressing
using "mflr 12; bcl 20,31,.+4; mflr 11; mtlr 12" that should be
avoided if possible.
bfd/
* elf64-ppc.c (struct ppc_link_hash_table): Add has_power10_relocs.
(select_alt_stub): New function.
(ppc_get_stub_entry): Use it here.
(ppc64_elf_check_relocs): Set had_power10_relocs rather than
power10_stubs.
(ppc64_elf_size_stubs): Clear power10_stubs here instead. Don't
merge notoc stubs with other varieties when power10_stubs is "auto".
Instead dup the stub hash table entry.
(plt_stub_size, ppc_build_one_stub, ppc_size_one_stub): Adjust
tests of power10_stubs.
ld/
* emultempl/ppc64elf.em (power10-stubs): Accept optional "auto" arg.
* ld.texi (power10-stubs): Update.
* testsuite/ld-powerpc/callstub-1.d: Force --power10-stubs.
* testsuite/ld-powerpc/callstub-2.d: Relax branch offset comparison.
* testsuite/ld-powerpc/callstub-4.d: New test.
* testsuite/ld-powerpc/notoc.d: Force --no-power10-stubs.
* testsuite/ld-powerpc/notoc3.d,
* testsuite/ld-powerpc/notoc3.s,
* testsuite/ld-powerpc/notoc3.wf: New test.
* testsuite/ld-powerpc/powerpc.exp: Run new tests. Pass
--no-power10-stubs for notoc link.
mmix bfd: fix bfd_assert for R_MMIX_PUSHJ_STUBBABLE against undef'd symbol
Spotted when inspecting gcc testsuite logs, but this already is
covered by the ld-mmix testsuite, it's just that the assert is ignored
since the regexp match is for a substring and not anchored.
With the anchors added but not the bugfix, the ld.log shows that the
asserts cause a non-match as intended:
Gone with the fix of course, leaving just the intended "undefined
reference" line.
I'm not going to add anchors manually for all the "error:" strings in
the test-suite, not even in the mmix parts. Sorry, but I'll just do
it for *these* specific undefined-reference tests.
Just a thought: maybe the run_dump_test "error:" string should
*automatically* get anchor marks prepended and appended for a single
line match as in the patch, "\A[^\n\r]*" prepended and \Z appended
unless either anchor mark or \r or \n is present in the regexp?
Committed.
bfd:
* elf64-mmix.c (mmix_elf_relax_section): Improve accounting for
R_MMIX_PUSHJ_STUBBABLE relocs against undefined symbols.
ld/testsuite:
* testsuite/ld-mmix/undef-1.d, testsuite/ld-mmix/undef-1m.d,
testsuite/ld-mmix/undef-2.d, testsuite/ld-mmix/undef-2m.d: Add
start- and end-anchors to error-string to match just a
single-line error-message.
H.J. Lu [Tue, 14 Jul 2020 16:57:52 +0000 (09:57 -0700)]
x86-64: Zero-extend lower 32 bits displacement to 64 bits
Since the addr32 (0x67) prefix zero-extends the lower 32 bits address to
64 bits, change disassembler to zero-extend the lower 32 bits displacement
to 64 bits when there is no base nor index registers.
Nick Clifton [Wed, 15 Jul 2020 11:53:59 +0000 (12:53 +0100)]
Fix the generation of REL relocs for missing build notes.
* write.c (create_note_reloc): Add desc2_size parameter. Zero out
the addend field of REL relocations. Store the full addend into
the note for REL relocations.
Alan Modra [Thu, 9 Jul 2020 13:18:10 +0000 (22:48 +0930)]
powerpc garbage collect test
ld's garbage collection test on powerpc64 catered for old compilers
(pre -mcmodel=medium support), setting options that caused the test to
fail. Which meant the test wasn't really testing anything. Get rid
of that old compiler support, and avoid -fPIE fails on ppc32.
* testsuite/ld-gc/gc.exp: Don't set -mminimal-toc for powerpc64,
and remove powerpc64 xfail. Use -fno-PIE for ppc32.
Alan Modra [Thu, 9 Jul 2020 07:05:27 +0000 (16:35 +0930)]
pr18841 tests on powerpc64
The PR18841 test does cross-module calls from within an ifunc
resolver, which is nasty, and not supported in general since the
called function may not be relocated. In this case the called
function (zoo) is just a stub so doesn't need relocating, but on ppc64
the function descriptor for zoo in the executable won't be relocated
at the time the shared library ifunc resolver runs. That means the
test will fail if your compiler generates PIEs by default.
PR 18841
* testsuite/ld-ifunc/ifunc.exp: Run pr18841 tests non-pie.
Alan Modra [Fri, 10 Jul 2020 01:18:45 +0000 (10:48 +0930)]
PowerPC64 ld --no-power10-stubs
Needed for libraries that use ifuncs or other means to support
cpu-optimized versions of functions, some power10, some not, and those
functions make calls using linkage stubs.
bfd/
* elf64-ppc.h (struct ppc64_elf_params): Add power10_stubs.
* elf64-ppc.c (struct ppc_link_hash_table): Delete
power10_stubs.
(ppc64_elf_check_relocs): Adjust setting of power10_stubs.
(plt_stub_size, ppc_build_one_stub, ppc_size_one_stub): Adjust
uses of power10_stubs.
ld/
* emultempl/ppc64elf.em (params): Init new field.
(enum ppc64_opt): Add OPTION_POWER10_STUBS and OPTION_NO_POWER10_STUBS.
(PARSE_AND_LIST_LONGOPTS): Support --power10-stubs and
--no-power10-stubs.
(PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Likewise.
* testsuite/ld-powerpc/callstub-3.d: New test.
* testsuite/ld-powerpc/powerpc.exp: Run it.
Nick Clifton [Mon, 6 Jul 2020 10:22:39 +0000 (11:22 +0100)]
Fix failures in the GOLD testsuite when run on systems that have been built with annobin.
* target-reloc.h (Default_comdat_behaviour:get): Ignore discarded
relocs that refer to the .gnu.build.attributes section.
* testsuite/script_test_7.sh: Adjust expected address of the .bss
section.
* testsuite/script_test_9.sh: Do not expect the .init section to
immediately follow the .text section in the mapping of sections to
segments.
Simon Marchi [Fri, 3 Jul 2020 00:38:47 +0000 (20:38 -0400)]
gdb: make macro_expand_next return a gdb::unique_xmalloc_ptr<char>
For some reason, macro_expand_next does not return a
gdb::unique_xmalloc_ptr<char>, like its counterparts macro_expand and
macro_expand_once. This patch fixes that.
macro_buffer::release now returns a gdb::unique_xmalloc_ptr<char> too,
which required updating the other callers. The `.release (). release
()` in macro_stringify looks a bit funny, but it's because one release
is for the macro_buffer, and the other is for the unique ptr.
I removed the ATTRIBUTE_UNUSED_RESULT on macro_buffer::release, I don't
really understand why it's there. I don't see how this method could be
called without using the result, that would be an obvious memory leak.
The commit that introduced it (4e4a8b932b7 "Add ATTRIBUTE_UNUSED_RESULT
to macro_buffer") doesn't give any details.
Simon Marchi [Fri, 3 Jul 2020 00:38:25 +0000 (20:38 -0400)]
gdb: remove callback in macro expand functions
I started to look into changing the callbacks in macroexp.h to use
gdb::function_view. However, I noticed that the passed lookup function
was always `standard_macro_lookup`, which looks up a macro in a
`macro_scope` object. Since that doesn't look like a very useful
abstraction, it would be simpler to just pass the scope around and have
the various functions call standard_macro_lookup themselves. This is
what this patch does.
Sebastian Huber [Thu, 2 Jul 2020 16:10:49 +0000 (18:10 +0200)]
sim/igen: Fix linker error with -fno-common
GCC 10 enables -fno-common by default. This resulted in multiple
definition linker errors since a global variable was declared and
defined in a header file:
ld: libsim.a(idecode.o):sim/v850/idecode.h:71: multiple definition of
`idecode_issue'; libsim.a(irun.o):sim/v850/idecode.h:71: first defined
here
ld: libsim.a(engine.o):sim/v850/idecode.h:71: multiple definition of
`idecode_issue'; libsim.a(irun.o):sim/v850/idecode.h:71: first defined
here
ld: libsim.a(support.o):sim/v850/idecode.h:71: multiple definition of
`idecode_issue'; libsim.a(irun.o):sim/v850/idecode.h:71: first defined
here
ld: libsim.a(semantics.o):sim/v850/idecode.h:71: multiple definition
of `idecode_issue'; libsim.a(irun.o):sim/v850/idecode.h:71: first
defined here
sim/igen
PR sim/26194
* lf.h (lf_get_file_type): Declare.
* lf.c (lf_get_file_type): Define.
* gen-idecode.c (print_idecode_issue_function_header): Use
lf_get_file_type() to issue an extern variable declaration in
case of header files.
Sebastian Huber [Wed, 1 Jul 2020 17:29:55 +0000 (19:29 +0200)]
sim/ppc: Fix linker error with -fno-common
GCC 10 enables -fno-common by default. This resulted in a multiple
definition linker error since global variables were declared and defined
in a header file:
ld: ld-insn.o:sim/ppc/ld-insn.h:221: multiple definition of
`max_model_fields_len'; igen.o:sim/ppc/ld-insn.h:221: first defined here
Pedro Alves [Thu, 2 Jul 2020 18:32:40 +0000 (19:32 +0100)]
Fix gdb.base/structs2.exp with Clang
gdb.base/structs2.exp fails to run with Clang, because of:
gdb compile failed, /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.base/structs2.c:16:14: warning:
implicit conversion from 'int' to 'signed char' changes value from 130 to
-126 [-Wconstant-conversion]
param_reg (130, 120, 33000, 32000);
~~~~~~~~~ ^~~
/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.base/structs2.c:16:24: warning:
implicit conversion from 'int' to 'short' changes value from 33000 to
-32536 [-Wconstant-conversion]
param_reg (130, 120, 33000, 32000);
~~~~~~~~~ ^~~~~
2 warnings generated.
=== gdb Summary ===
# of untested testcases 1
Fix it by passing actual negative numbers.
gdb/testsuite/ChangeLog:
* gdb.base/structs2.c (main): Adjust second parem_reg call to
explicitly write negative numbers.
* gdb.base/structs2.exp: Adjust expected output.
Pedro Alves [Thu, 2 Jul 2020 14:54:36 +0000 (15:54 +0100)]
Fix gdb.base/charset.exp with Clang
gdb.base/charset.exp fails to run with Clang, because of:
gdb compile failed, /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.base/charset.c:144:20: warning:
implicit conversion from 'int' to 'char' changes value from 162 to -94
[-Wconstant-conversion]
11, 162, 17);
^~~
/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.base/charset.c:151:16: warning:
implicit conversion from 'int' to 'char' changes value from 167 to -89
[-Wconstant-conversion]
167,
^~~
/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.base/charset.c:168:16: warning:
implicit conversion from 'int' to 'char' changes value from 167 to -89
[-Wconstant-conversion]
167,
^~~
3 warnings generated.
=== gdb Summary ===
# of untested testcases 1
Fix it by changing init_string to take unsigned char parameters.
gdb/testsuite/ChangeLog:
* gdb.base/charset.c (init_string): Change all char parameters to
unsigned char parameters.
Pedro Alves [Fri, 3 Jul 2020 12:34:22 +0000 (13:34 +0100)]
Remove stale -DNO_PROTOTYPES bits from gdb testsuite
The gdb.base/call-sc.exp, gdb.base/structs.exp and
gdb.base/structs2.exp testcases still try compiling the sources with
-DNO_PROTOTYPES, but the corresponding sources don't have any #ifdef
NO_PROTOTYPES any longer. Those were removed throughout years ago.
OTOH, gdb.base/ovlymgr.h does check for NO_PROTOTYPES, but no .exp
file compiles it with -DNO_PROTOTYPES.
gdb.base/reread.exp and gdb.base/varargs.exp set a 'prototypes'
global, which is a stale bit left behind when the "try-compiling
without and then with -DNO_PROTOTYPES" logic was around.
gdb/testsuite/ChangeLog:
* gdb.base/call-sc.exp (start_scalars_test): Use
prepare_for_testing and don't try compiling with -DNO_PROTOTYPES.
* gdb.base/overlays.c: Remove references to PARAMS.
* gdb.base/ovlymgr.h (PARAMS): Delete, and remove all references.
* gdb.base/reread.exp: Don't set 'prototypes' global.
* gdb.base/structs.exp (start_structs_test): Use
prepare_for_testing and don't try compiling with -DNO_PROTOTYPES.
* gdb.base/structs2.exp: Don't set 'prototypes' global. Use
prepare_for_testing and don't try compiling with -DNO_PROTOTYPES.
Don't issue "set width 0". Remove gdb_stop_suppressing_tests
call.
* gdb.base/varargs.exp: Don't set 'prototypes' global.
Pedro Alves [Fri, 3 Jul 2020 12:34:21 +0000 (13:34 +0100)]
Remove stale overlay testcase bits
D10V support was removed years ago, but the gdb.base/d10vovly.c file
stayed behind. Looking a bit closer, I can't find anywhere that
references gdb.base/m32rovly.c either.
Both gdb.base/m32rovly.c and gdb.base/d10vovly.c seem to be older
copies of gdb.base/ovlymgr.c, that are exactly the same, except for
some cosmetic differences, and for missing _ovly_debug_event. Note
that gdb.base/ovlymgr.c has the #ifdef __M32R__ bits too. Note also
that gdb.base/overlays.exp is currently only supported on m32r, and
that uses ovlymgr.c not gdb.base/m32rovly.c.
gdb/testsuite/ChangeLog:
* gdb.base/d10vovly.c: Delete.
* gdb.base/m32rovly.c: Delete.
* gdb.base/ovlymgr.c: Remove all code guarded by __D10V__.
H.J. Lu [Thu, 2 Jul 2020 13:30:00 +0000 (06:30 -0700)]
x86: Add SwapSources
We check register-only source operand to decide if two source operands of
VEX encoded instructions should be swapped. But source operands in AMX
instructions with two source operands swapped are all register-only
operand. Add SwapSources to indicate two source operands should be
swapped.
gas/
* config/tc-i386.c (build_modrm_byte): Check vexswapsources to
swap two source operands.
opcodes/
* i386-gen.c (opcode_modifiers): Add VexSwapSources.
* i386-opc.h (VexSwapSources): New.
(i386_opcode_modifier): Add vexswapsources.
* i386-opc.tbl: Add VexSwapSources to BMI2 and BMI instructions
with two source operands swapped.
* i386-tbl.h: Regenerated.
Alex Coplan [Thu, 2 Jul 2020 12:53:07 +0000 (13:53 +0100)]
aarch64: Fix segfault on unicode symbols
This patch fixes a segfault which occurs when the AArch64 backend parses
a symbol operand that begins with a register name and ends with a
unicode byte (byte value > 127).
For example, the following input causes the crash:
* config/tc-aarch64.c (reg_name_p): Fix cast so that we don't
segfault on negative chars.
* testsuite/gas/aarch64/reglike-label-unicode-segv.d: New test.
* testsuite/gas/aarch64/reglike-label-unicode-segv.s: Input.
Simon Marchi [Thu, 2 Jul 2020 12:37:26 +0000 (08:37 -0400)]
gdb: remove unused fetch_inferior_event and inferior_event_handler parameters
I noticed that fetch_inferior_event receives the client_data parameter
from its caller, inferior_event_handler, but doesn't actually need it.
This patch removes it. In turn, inferior_event_handler doesn't use its
parameter, so remove it too.
The `data` argument used when registering
remote_async_inferior_event_handler is changed to NULL, to avoid
confusion. It could make people think that the value passed is used
somewhere, when in fact it's not.
Nick Clifton [Thu, 2 Jul 2020 10:30:52 +0000 (11:30 +0100)]
Change readelf's display of symbol names (when not in --wide mode) so that if they are going to be truncated then "[...]" is displayed at the end. Add a comment line option to disable this enhancement and restore the old behaviour.
PR 26028
binutils* readelf.c (print_symbol): Handle truncation of symbol names.
(options): Add -T/--silent-truncation option.
(parse_args): Handle the option.
(print_dynamic_symbol): Correct calculation of width available to
display symbol name.
* doc/binutils.texi: Document the -T option to readelf.
* NEWS: Mention the new feature.
Tom Tromey [Thu, 2 Jul 2020 03:21:12 +0000 (21:21 -0600)]
Make tui_win_info::name pure virtual
It seemed cleaner to me for tui_win_info::name to be pure virtual.
This meant adding a name method to the locator window; but this too
seems like an improvement.
gdb/ChangeLog
2020-07-01 Tom Tromey <tom@tromey.com>
* tui/tui-data.h (struct tui_win_info) <name>: Now pure virtual.
* tui/tui-stack.h (struct tui_locator_window) <name>: New method.
Tom Tromey [Thu, 2 Jul 2020 03:21:12 +0000 (21:21 -0600)]
Derive tui_locator_window from tui_win_info
tui_locator_window is the last remaining concrete child class of
tui_gen_win_info. It seems a bit cleaner to me to flatten the
hierarchy a bit; this patch prepares for that by changing
tui_locator_window to derive from tui_win_info.
gdb/ChangeLog
2020-07-01 Tom Tromey <tom@tromey.com>
* tui/tui-stack.h (struct tui_locator_window): Derive from
tui_win_info.
<do_scroll_horizontal, do_scroll_vertical>: New methods.
<can_box>: New method.
Tom Tromey [Thu, 2 Jul 2020 03:21:12 +0000 (21:21 -0600)]
Remove body of tui_locator_window constructor
The tui_locator_window constructor initializes the first character of
two of its members. However, this is actually an error, since these
were changed to be std::string. This removes the erroneous code.
gdb/ChangeLog
2020-07-01 Tom Tromey <tom@tromey.com>
Tom Tromey [Thu, 2 Jul 2020 03:21:12 +0000 (21:21 -0600)]
Don't derive tui_data_item_window from tui_gen_win_info
There's no deep reason that tui_data_item_window should derive from
tui_gen_win_info -- it currently uses a curses window to render, but
that isn't truly needed, and it adds some hacks to other parts of the
TUI.
This patch changes tui_data_item_window so that it doesn't have a base
class, and updates the register window. This simplifies the code and
enables a subsequent cleanup.
gdb/ChangeLog
2020-07-01 Tom Tromey <tom@tromey.com>
Tom Tromey [Thu, 2 Jul 2020 03:21:12 +0000 (21:21 -0600)]
Rename tui_data_item_window::item_no
tui_data_item_window::item_no is misnamed -- it only can be used for a
register, but it references a "display" number as well. (Based on
other comments I've seen in the past -- most since deleted -- I think
there were plans at one point to display variables in this window as
well. However, this was never implemented.)
This patch renames this member to be more correct.
gdb/ChangeLog
2020-07-01 Tom Tromey <tom@tromey.com>
Tom Tromey [Thu, 2 Jul 2020 03:21:12 +0000 (21:21 -0600)]
Remove tui_expand_tabs
tui_expand_tabs only has a single caller. This patch removes this
function, in favor of a tab-expanding variant of string_file. This
simplifies the code somewhat.
gdb/ChangeLog
2020-07-01 Tom Tromey <tom@tromey.com>
* tui/tui-regs.h (struct tui_data_item_window) <content>: Now a
std::string.
* tui/tui-regs.c (class tab_expansion_file): New.
(tab_expansion_file::write): New method.
(tui_register_format): Change return type. Use
tab_expansion_file.
(tui_get_register, tui_data_window::display_registers_from)
(tui_data_item_window::rerender): Update.
* tui/tui-io.h (tui_expand_tabs): Don't declare.
* tui/tui-io.c (tui_expand_tabs): Remove.
Fangrui Song [Wed, 1 Jul 2020 19:31:44 +0000 (12:31 -0700)]
Recognize -1 as a tombstone value in .debug_line
LLD from 11 onwards (https://reviews.llvm.org/D81784) uses -1 to
represent a relocation in .debug_line referencing a discarded symbol.
Recognize -1 to fix gdb.base/break-on-linker-gcd-function.exp when the
linker is a newer LLD.
gdb/ChangeLog:
* dwarf2/read.c (lnp_state_machine::check_line_address): Test -1.
Allow reference form for DW_AT_associated and DW_AT_allocated attributes
Currently, GDB rejects the (die) reference form while it accepts exprloc
form. It is allowed in DWARF standard. "Table 7.5: Attribute encodings"
in DWARF5 standard. Flang compiler assigns (die) reference to
DW_AT_associated and DW_AT_allocated for some cases.
gdb/ChangeLog
* dwarf2/read.c (set_die_type): Removed conditions to restrict
forms for DW_AT_associated and DW_AT_allocated attributes,
which is already checked in function attr_to_dynamic_prop.
Alan Modra [Tue, 30 Jun 2020 23:45:34 +0000 (09:15 +0930)]
obsolete xc16x
The xc16x md_apply_fix code is just so broken that in my opinion the
target should never have been accepted, and from a quick look at
commit logs for the target it appears that no one has ever contributed
fixes for anything. This target has just been a 14 year burden on
global binutils and cgen maintainers. That's not how free software is
supposed to work.
Fix test breakages caused by removal of gdb_py_test_multiple.
Tom de Vries detected that some python tests were broken as
they were still using gdb_py_test_multiple that was replaced
by gdb_test_multiline. Repair these tests by using the new function.
gdb/testsuite/ChangeLog
2020-06-30 Philippe Waroquiers <philippe.waroquiers@skynet.be>
Tom Tromey [Tue, 30 Jun 2020 13:53:03 +0000 (07:53 -0600)]
Do not define basic_string_view::to_string
gdb's copy of basic_string_view includes a to_string method. However,
according to cppreference, this is not a method on the real
std::basic_string_view:
This difference matters because gdb_string_view.h will use the
standard implementation when built with a C++17 or later. This caused
PR build/26183.
This patch fixes the problem by changing the method to be a standalone
helper function, and then rewriting the uses. Tested by rebuilding
with a version of GCC that defaults to C++17.
(Note that the build still is not clean; and also I noticed that the
libstdc++ string_view forbids the use of nullptr ... I wonder if gdb
violates that.)
gdb/ChangeLog
2020-06-30 Tom Tromey <tromey@adacore.com>
PR build/26183:
* ada-lang.c (ada_lookup_name_info::ada_lookup_name_info): Use
gdb::to_string.
gdbsupport/ChangeLog
2020-06-30 Tom Tromey <tromey@adacore.com>
PR build/26183:
* gdb_string_view.h (basic_string_view::to_string): Remove.
(gdb::to_string): New function.
Tom de Vries [Tue, 30 Jun 2020 07:23:09 +0000 (09:23 +0200)]
[gdb/testsuite] Handle early_flags in gdb_default_target_compile
In gdb_default_target_compile, we use dejagnu's default_target_compile, unless
we need support for languages that are not yet support in the used dejagnu
version, in which case we use a local default_target_compile:
gdb_default_target_compile_1.
However, there's another reason to use the local default_target_compile: when
early_flags is used, because there's no dejagnu release available yet
supporting this.
Fix this by detecting and handling early_flags in gdb_default_target_compile.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-06-30 Tom de Vries <tdevries@suse.de>
PR testsuite/26175
* lib/future.exp (gdb_default_target_compile): Detect and handle
early_flags.
Alan Modra [Tue, 30 Jun 2020 03:52:52 +0000 (13:22 +0930)]
microblaze-linux XPASS ld-elf/var1
microblaze-linux uses the standard ELF script, microblaze-elf its own
script lacking an input section pattern needed to make this test pass.
Add the missing pattern for .data, in line with most other sections
that do have .* patterns.
Nelson Chu [Mon, 8 Jun 2020 02:54:53 +0000 (10:54 +0800)]
RISC-V: Support debug and float CSR as the unprivileged ones.
The unprivileged CSR should be controlled by other specific specs rather
than the privileged spec. For example, the debug CSR should be controlled
by the debug spec, and the float CSR should be controlled by the float
spec. User may use assembler options to choose what the debug and other
specs they want, or may encode the versions of specs into the architecture
string directly. Since we haven't decided which one is better, we set the
defined and aborted versions of unprivileged CSR to PRIV_SPEC_CLASS_NONE
in the include/opcode/riscv-opc.h, to tell assembler don't check priv spec
versions for them. However, these PRIV_SPEC_CLASS_NONE will be changed
to FLOAT_SPEC_CLASS_* and DEBUG_SPEC_CLASS_* in the future.
gas/
* config/tc-riscv.c (riscv_csr_class_check): Removed. Move the
checking into riscv_csr_address.
(riscv_csr_version_check): Likewise.
(riscv_csr_address): New function. Return the suitable CSR address
after checking the ISA dependency and versions. Issue warnings if
we find any conflict and -mcsr-check is set. CSR_CLASS_F and
CSR_CLASS_DEBUG are unprivileged CSR for now, so don't check the
priv spec versions for them.
(reg_csr_lookup_internal): Call riscv_csr_address to find the
suitable CSR address.
* testsuite/gas/riscv/priv-reg-fail-fext.d: Remove -mpriv-spec=1.11.
* testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-fext.l: We don't care the
priv spec warnings here. These warnings are added by accident.
Remove them and only focus on the ISA dependency warnings.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Updated since
dscratch0 and dscratch1 are regarded as the unprivileged CSR rather
than the privileged ones.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* testsuite/gas/riscv/priv-reg.s: Likewise. Add missing debug CSR.
* testsuite/gas/riscv/priv-reg-version-1p9.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p11.d: Likewise.
* testsuite/gas/riscv/csr-dw-regnums.d: Likewise.
* testsuite/gas/riscv/csr-dw-regnums.s: Likewise.
include/
* opcode/riscv-opc.h: Support the unprivileged CSR. The versions
of the unprivileged CSR should be PRIV_SPEC_CLASS_NONE for now.
* opcode/riscv.h (enum riscv_csr_class): Add CSR_CLASS_DEBUG.
opcodes/
* riscv-dis.c (print_insn_args, case 'E'): Updated. Let the
unprivileged CSR can also be initialized.
Nelson Chu [Tue, 23 Jun 2020 06:23:51 +0000 (14:23 +0800)]
RISC-V: Cleanup the include/opcode/riscv-opc.h.
The include/opcode/riscv-opc.h file is no longer automatically generated,
so we remove the misleading comments and add new ones. Besides, the CAUSE_*
macros and DECLARE_CAUSE are unused for binutils and gdb. Therefore, remove
them, too.
include/
* opcode/riscv-opc.h: Cleanup and remove the unused macros.
Simon Marchi [Mon, 29 Jun 2020 15:27:40 +0000 (11:27 -0400)]
gdb: fix documentation of gdbarch_displaced_step_copy_insn
I spotted something that looks wrong in the doc of
gdbarch_displaced_step_copy_insn.
It says that if the function returns NULL, it means that it has emulated
the behavior of the instruction and written the result to REGS.
However, it says below that the function may return NULL to indicate
that the instruction can't be single-stepped out-of-line, in which case
the core steps the instruction in-line. The two are contradictory.
The right one is the latter, if the function returns NULL, the core
falls back to in-line stepping. I checked all the implementations of
this function and they all agree with this.
Simon Marchi [Mon, 29 Jun 2020 14:19:43 +0000 (10:19 -0400)]
gdb/testsuite: better handle failures in simavr board, reap simavr process
This patch makes a few adjustments to the simavr.exp to handle tests
that error out more gracefully. I put all the changes in the same patch
because right now it's in a very bad shape, so it's very painful to do
small incremental adjustements. I found that with these changes, it
becomes reasonably stable.
For example, the gdb.base/step-over-syscall.exp test is a bit buggy
(stuff for another patch...), in that it calls gdb_load (through
clean_restart) with a file that doesn't exist. The gdb_load
implementation in simavr.exp gets called with a file that doesn't exist,
and simavr (expectedly) fails to start.
When this happens, we currently leave the $simavr_spawn_id variable set.
However, because the simavr process has terminated, its spawn id is
closed. When the next test tries to close the previous connection to
simavr, it fails to, and this error is thrown:
ERROR: close: spawn id exp86 not open
while executing
"close -i $simavr_spawn_id"
(procedure "gdb_load" line 18)
invoked from within
In other words, any test ran after step-over-syscall.exp will have
simavr.exp's gdb_load fail on it.
This patch tries to make sure that simavr.exp's gdb_load only leaves
simavr_spawn_id set if everything went fine. If we couldn't start
simavr, don't see the expected output, or fail to connect to it, we
close the spawn id (if needed) and unset simavr_spawn_id.
As an additional precaution, I added a catch around the "close the
previous connection" code. Ideally, this shouldn't be necessary, but I
bet there are other similar scenarios where we might try to close an
already close spawn id. So I think displaying a warning is better than
messing up all following tests.
Also, the board never wait'ed for the simavr process, resulting in tons
of zombie simavr processes hanging around. This patch adds some calls
to "wait" whenever we close the connection (or realize it is already
closed), which seems to fix the problem.
Finally I switched a `gdb_expect` to bare `expect`, where we wait for
the "listening" message from simavr. I found it necessary because
gdb_expect (through remote_expect) adds a `-i <gdb spawn id> -timeout
10`. So if for some reason the GDB process has crashed in the mean
time, this expect will unexpectedly error out with a `spawn id <gdb
spawn id> not open`. Therefore, change `gdb_expect` to `expect` so that
we only deal with simavr's spawn id here.
Here are the results on TESTS="gdb.base/*.exp" before:
# of expected passes 4816
# of unexpected failures 4433
# of known failures 2
# of unresolved testcases 300
# of untested testcases 143
# of unsupported tests 7
# of paths in test names 2
# of duplicate test names 10
and after:
# of expected passes 21957
# of unexpected failures 1564
# of expected failures 8
# of unknown successes 1
# of known failures 31
# of unresolved testcases 532
# of untested testcases 153
# of unsupported tests 28
# of paths in test names 2
# of duplicate test names 32
I tested using simavr's current master (7c254e2081b5).
gdb/testsuite/ChangeLog:
* boards/simavr.exp (gdb_load): Catch errors when closing
previous connection. Close connection, wait for process and
unset simavr_spawn_id on failure.
Tom de Vries [Mon, 29 Jun 2020 11:59:19 +0000 (13:59 +0200)]
[gdb/testsuite] Emit unresolved for unknown proc
Since commit 26783bce15 "[gdb/testsuite] Don't abort testrun for invalid
command in test-case" we don't abort the testrun when encountering an invalid
command. However, since we don't report errors in the summary, there's a
chance that the error goes unnoticed.
Make the invalid command error more visible by marking the test-case
unresolved, such that we have f.i.:
...
PASS: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write
UNRESOLVED: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: \
testcase aborted due to invalid command name: gdb_py_test_multiple
ERROR: tcl error sourcing py-breakpoint.exp.
ERROR: invalid command name "gdb_py_test_multiple"
while executing
...
=== gdb Summary ===
nr of expected passes 56
nr of unresolved testcases 1
...
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-06-29 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (unknown): Make test-case unresolved.
Tom de Vries [Mon, 29 Jun 2020 10:14:10 +0000 (12:14 +0200)]
[gdbserver] Add missing include of gdbsupport/agent.h
The file gdbserver/ax.h contains:
...
#ifdef IN_PROCESS_AGENT
#define debug_threads debug_agent
#endif
...
but does not declare debug_agent.
Fix this by adding an include of gdbsupport/agent.h.
[ If this fix would have been in place before commit 8118159c69 "[gdbserver] Fix
Wlto-type-mismatch for debug_agent", we would have simply run into this build
breaker with a regular, non-lto build:
...
src/gdbserver/ax.cc:28:5: error: conflicting declaration 'int debug_agent'
int debug_agent = 0;
^~~~~~~~~~~
In file included from src/gdbserver/ax.h:25:0,
from src/gdbserver/ax.cc:20:
src/gdbsupport/agent.h:47:13: note: previous declaration as 'bool debug_agent'
extern bool debug_agent;
^~~~~~~~~~~
... ]
Tom de Vries [Mon, 29 Jun 2020 09:02:06 +0000 (11:02 +0200)]
[gdb/testsuite] Expect conformation question in gdb.server/solib-list.exp
Before commit a8654e7d78 'Fixes PR 25475: ensure exec-file-mismatch "ask"
always asks in case of mismatch', there was a difference in behaviour in
test-case gdb.server/solib-list.exp.
If the executable did not contain debug info (as is usually the case), gdb
would detect a mismatch but not ask for confirmation:
...
(gdb) target remote localhost:2346^M
Remote debugging using localhost:2346^M
warning: Mismatch between current exec-file solib-list^M
and automatically determined exec-file /lib64/ld-2.26.so^M
exec-file-mismatch handling is currently "ask"^M
Reading symbols from /lib64/ld-2.26.so...^M
Reading symbols from /usr/lib/debug/lib64/ld-2.26.so.debug...^M
0x00007ffff7dd7ea0 in _start () at rtld.c:745^M
745 }^M
(gdb) PASS: gdb.server/solib-list.exp: non-stop 0: target remote
...
If the executable did contain debug info (as happens to be the case for
openSUSE), gdb would detect a mismatch and ask for confirmation:
...
(gdb) PASS: gdb.server/solib-list.exp: non-stop 0: file binfile
target remote localhost:2346^M
Remote debugging using localhost:2346^M
warning: Mismatch between current exec-file solib-list^M
and automatically determined exec-file /lib64/ld-2.26.so^M
exec-file-mismatch handling is currently "ask"^M
Load new symbol table from "/lib64/ld-2.26.so"? (y or n) y^M
Reading symbols from /lib64/ld-2.26.so...^M
Reading symbols from /usr/lib/debug/lib64/ld-2.26.so.debug...^M
0x00007ffff7dd7ea0 in _start () at rtld.c:745^M
745 }^M
(gdb) PASS: gdb.server/solib-list.exp: non-stop 0: target remote
...
After commit a8654e7d78, the confirmation is now also asked in case there's
no debug info.
Tighten the test-case by verifying that the confirmation question is asked, as
suggested in the log message of commit a8654e7d78:
...
we can remove the bypass introduced by Tom in 6b9374f1, in order to always
answer to the 'load' question.
...
gdb/testsuite/ChangeLog:
2020-06-29 Tom de Vries <tdevries@suse.de>
PR gdb/25475
* gdb.server/solib-list.exp: Verify that the symbol reload
confirmation question is asked.
projects / thirdparty / binutils-gdb.git / log
