4 * System management functions for the CUPS scheduler.
6 * Copyright 2007-2013 by Apple Inc.
7 * Copyright 2006 by Easy Software Products.
9 * These coded instructions, statements, and computer programs are the
10 * property of Apple Inc. and are protected by Federal copyright
11 * law. Distribution and use rights are outlined in the file "LICENSE.txt"
12 * which should have been included with this file. If this file is
13 * file is missing or damaged, see the license at "http://www.cups.org/".
17 * cupsdCleanDirty() - Write dirty config and state files.
18 * cupsdMarkDirty() - Mark config or state files as needing a
20 * cupsdSetBusyState() - Let the system know when we are busy
22 * cupsdAllowSleep() - Tell the OS it is now OK to sleep.
23 * cupsdStartSystemMonitor() - Start monitoring for system change.
24 * cupsdStopSystemMonitor() - Stop monitoring for system change.
25 * sysEventThreadEntry() - A thread to receive power and computer
26 * name change notifications.
27 * sysEventPowerNotifier() - Handle power notification events.
28 * sysEventConfigurationNotifier() - Computer name changed notification
30 * sysEventTimerNotifier() - Handle delayed event notifications.
31 * sysUpdate() - Update the current system state.
36 * Include necessary headers...
40 #ifdef HAVE_VPROC_TRANSACTION_BEGIN
42 #endif /* HAVE_VPROC_TRANSACTION_BEGIN */
44 # include <IOKit/pwr_mgt/IOPMLib.h>
45 # ifdef HAVE_IOKIT_PWR_MGT_IOPMLIBPRIVATE_H
46 # include <IOKit/pwr_mgt/IOPMLibPrivate.h>
48 # define kIOPMAssertionTypeDenySystemSleep CFSTR("DenySystemSleep")
49 # endif /* HAVE_IOKIT_PWR_MGT_IOPMLIBPRIVATE_H */
50 #endif /* __APPLE__ */
54 * The system management functions cover disk and power management which
55 * are primarily used on portable computers.
57 * Disk management involves delaying the write of certain configuration
58 * and state files to minimize the number of times the disk has to spin
61 * Power management support is currently only implemented on MacOS X, but
62 * essentially we use four functions to let the OS know when it is OK to
63 * put the system to sleep, typically when we are not in the middle of
66 * Once put to sleep, we invalidate all remote printers since it is common
67 * to wake up in a new location/on a new wireless network.
74 #if defined(kIOPMAssertionTypeDenySystemSleep) || defined(kIOPMAssertNetworkClientActive)
75 static IOPMAssertionID keep_awake
= 0; /* Keep the system awake while printing */
76 #endif /* kIOPMAssertionTypeDenySystemSleep || kIOPMAssertNetworkClientActive */
80 * 'cupsdCleanDirty()' - Write dirty config and state files.
86 if (DirtyFiles
& CUPSD_DIRTY_PRINTERS
)
87 cupsdSaveAllPrinters();
89 if (DirtyFiles
& CUPSD_DIRTY_CLASSES
)
90 cupsdSaveAllClasses();
92 if (DirtyFiles
& CUPSD_DIRTY_PRINTCAP
)
95 if (DirtyFiles
& CUPSD_DIRTY_JOBS
)
97 cupsd_job_t
*job
; /* Current job */
101 for (job
= (cupsd_job_t
*)cupsArrayFirst(Jobs
);
103 job
= (cupsd_job_t
*)cupsArrayNext(Jobs
))
108 if (DirtyFiles
& CUPSD_DIRTY_SUBSCRIPTIONS
)
109 cupsdSaveAllSubscriptions();
111 DirtyFiles
= CUPSD_DIRTY_NONE
;
119 * 'cupsdMarkDirty()' - Mark config or state files as needing a write.
123 cupsdMarkDirty(int what
) /* I - What file(s) are dirty? */
125 cupsdLogMessage(CUPSD_LOG_DEBUG
, "cupsdMarkDirty(%c%c%c%c%c)",
126 (what
& CUPSD_DIRTY_PRINTERS
) ? 'P' : '-',
127 (what
& CUPSD_DIRTY_CLASSES
) ? 'C' : '-',
128 (what
& CUPSD_DIRTY_PRINTCAP
) ? 'p' : '-',
129 (what
& CUPSD_DIRTY_JOBS
) ? 'J' : '-',
130 (what
& CUPSD_DIRTY_SUBSCRIPTIONS
) ? 'S' : '-');
132 if (what
== CUPSD_DIRTY_PRINTCAP
&& !Printcap
)
138 DirtyCleanTime
= time(NULL
) + DirtyCleanInterval
;
145 * 'cupsdSetBusyState()' - Let the system know when we are busy doing something.
149 cupsdSetBusyState(void)
151 int i
; /* Looping var */
152 cupsd_job_t
*job
; /* Current job */
153 cupsd_printer_t
*p
; /* Current printer */
154 int newbusy
; /* New busy state */
155 static int busy
= 0; /* Current busy state */
156 static const char * const busy_text
[] =
157 { /* Text for busy states */
161 "Printing jobs and dirty files",
163 "Active clients and dirty files",
164 "Active clients and printing jobs",
165 "Active clients, printing jobs, and dirty files"
167 #ifdef HAVE_VPROC_TRANSACTION_BEGIN
168 static vproc_transaction_t vtran
= 0; /* Current busy transaction */
169 #endif /* HAVE_VPROC_TRANSACTION_BEGIN */
173 * Figure out how busy we are...
176 newbusy
= (DirtyCleanTime
? 1 : 0) |
177 (cupsArrayCount(ActiveClients
) ? 4 : 0);
179 for (job
= (cupsd_job_t
*)cupsArrayFirst(PrintingJobs
);
181 job
= (cupsd_job_t
*)cupsArrayNext(PrintingJobs
))
183 if ((p
= job
->printer
) != NULL
)
185 for (i
= 0; i
< p
->num_reasons
; i
++)
186 if (!strcmp(p
->reasons
[i
], "connecting-to-device"))
189 if (!p
->num_reasons
|| i
>= p
->num_reasons
)
197 cupsdLogMessage(CUPSD_LOG_DEBUG
,
198 "cupsdSetBusyState: newbusy=\"%s\", busy=\"%s\"",
199 busy_text
[newbusy
], busy_text
[busy
]);
202 * Manage state changes...
209 #ifdef HAVE_VPROC_TRANSACTION_BEGIN
211 vtran
= vproc_transaction_begin(NULL
);
212 else if (!busy
&& vtran
)
214 vproc_transaction_end(NULL
, vtran
);
217 #endif /* HAVE_VPROC_TRANSACTION_BEGIN */
220 #if defined(kIOPMAssertionTypeDenySystemSleep) || defined(kIOPMAssertNetworkClientActive)
221 if (cupsArrayCount(PrintingJobs
) > 0 && !keep_awake
)
223 # ifdef kIOPMAssertNetworkClientActive
224 cupsdLogMessage(CUPSD_LOG_DEBUG
, "Asserting NetworkClientActive.");
226 IOPMAssertionCreateWithName(kIOPMAssertNetworkClientActive
,
227 kIOPMAssertionLevelOn
,
228 CFSTR("org.cups.cupsd"), &keep_awake
);
231 cupsdLogMessage(CUPSD_LOG_DEBUG
, "Asserting DenySystemSleep.");
233 IOPMAssertionCreateWithName(kIOPMAssertionTypeDenySystemSleep
,
234 kIOPMAssertionLevelOn
,
235 CFSTR("org.cups.cupsd"), &keep_awake
);
237 # endif /* kIOPMAssertNetworkClientActive */
239 else if (cupsArrayCount(PrintingJobs
) == 0 && keep_awake
)
241 cupsdLogMessage(CUPSD_LOG_DEBUG
, "Releasing power assertion.");
242 IOPMAssertionRelease(keep_awake
);
245 #endif /* kIOPMAssertionTypeDenySystemSleep || kIOPMAssertNetworkClientActive */
251 * This is the Apple-specific system event code. It works by creating
252 * a worker thread that waits for events from the OS and relays them
253 * to the main thread via a traditional pipe.
257 * Include MacOS-specific headers...
260 # include <IOKit/IOKitLib.h>
261 # include <IOKit/IOMessage.h>
262 # include <IOKit/pwr_mgt/IOPMLib.h>
263 # include <SystemConfiguration/SystemConfiguration.h>
264 # include <pthread.h>
271 # define SYSEVENT_CANSLEEP 0x1 /* Decide whether to allow sleep or not */
272 # define SYSEVENT_WILLSLEEP 0x2 /* Computer will go to sleep */
273 # define SYSEVENT_WOKE 0x4 /* Computer woke from sleep */
274 # define SYSEVENT_NETCHANGED 0x8 /* Network changed */
275 # define SYSEVENT_NAMECHANGED 0x10 /* Computer name changed */
282 typedef struct cupsd_sysevent_s
/*** System event data ****/
284 unsigned char event
; /* Event bit field */
285 io_connect_t powerKernelPort
; /* Power context data */
286 long powerNotificationID
; /* Power event data */
290 typedef struct cupsd_thread_data_s
/*** Thread context data ****/
292 cupsd_sysevent_t sysevent
; /* System event */
293 CFRunLoopTimerRef timerRef
; /* Timer to delay some change *
295 } cupsd_thread_data_t
;
302 static pthread_t SysEventThread
= NULL
;
303 /* Thread to host a runloop */
304 static pthread_mutex_t SysEventThreadMutex
= { 0 };
305 /* Coordinates access to shared gloabals */
306 static pthread_cond_t SysEventThreadCond
= { 0 };
307 /* Thread initialization complete condition */
308 static CFRunLoopRef SysEventRunloop
= NULL
;
309 /* The runloop. Access must be protected! */
310 static CFStringRef ComputerNameKey
= NULL
,
311 /* Computer name key */
312 BTMMKey
= NULL
, /* Back to My Mac key */
313 NetworkGlobalKeyIPv4
= NULL
,
314 /* Network global IPv4 key */
315 NetworkGlobalKeyIPv6
= NULL
,
316 /* Network global IPv6 key */
317 NetworkGlobalKeyDNS
= NULL
,
318 /* Network global DNS key */
321 NetworkInterfaceKeyIPv4
= NULL
,
322 /* Netowrk interface key */
323 NetworkInterfaceKeyIPv6
= NULL
;
324 /* Netowrk interface key */
325 static cupsd_sysevent_t LastSysEvent
; /* Last system event (for delayed sleep) */
332 static void *sysEventThreadEntry(void);
333 static void sysEventPowerNotifier(void *context
, io_service_t service
,
334 natural_t messageType
,
335 void *messageArgument
);
336 static void sysEventConfigurationNotifier(SCDynamicStoreRef store
,
337 CFArrayRef changedKeys
,
339 static void sysEventTimerNotifier(CFRunLoopTimerRef timer
, void *context
);
340 static void sysUpdate(void);
344 * 'cupsdAllowSleep()' - Tell the OS it is now OK to sleep.
348 cupsdAllowSleep(void)
352 IOAllowPowerChange(LastSysEvent
.powerKernelPort
,
353 LastSysEvent
.powerNotificationID
);
358 * 'cupsdStartSystemMonitor()' - Start monitoring for system change.
362 cupsdStartSystemMonitor(void)
364 int flags
; /* fcntl flags on pipe */
367 if (cupsdOpenPipe(SysEventPipes
))
369 cupsdLogMessage(CUPSD_LOG_ERROR
, "System event monitor pipe() failed - %s!",
374 cupsdAddSelect(SysEventPipes
[0], (cupsd_selfunc_t
)sysUpdate
, NULL
, NULL
);
377 * Set non-blocking mode on the descriptor we will be receiving notification
381 flags
= fcntl(SysEventPipes
[0], F_GETFL
, 0);
382 fcntl(SysEventPipes
[0], F_SETFL
, flags
| O_NONBLOCK
);
385 * Start the thread that runs the runloop...
388 pthread_mutex_init(&SysEventThreadMutex
, NULL
);
389 pthread_cond_init(&SysEventThreadCond
, NULL
);
390 pthread_create(&SysEventThread
, NULL
, (void *(*)())sysEventThreadEntry
, NULL
);
395 * 'cupsdStopSystemMonitor()' - Stop monitoring for system change.
399 cupsdStopSystemMonitor(void)
401 CFRunLoopRef rl
; /* The event handler runloop */
407 * Make sure the thread has completed it's initialization and
408 * stored it's runloop reference in the shared global.
411 pthread_mutex_lock(&SysEventThreadMutex
);
413 if (!SysEventRunloop
)
414 pthread_cond_wait(&SysEventThreadCond
, &SysEventThreadMutex
);
416 rl
= SysEventRunloop
;
417 SysEventRunloop
= NULL
;
419 pthread_mutex_unlock(&SysEventThreadMutex
);
424 pthread_join(SysEventThread
, NULL
);
425 pthread_mutex_destroy(&SysEventThreadMutex
);
426 pthread_cond_destroy(&SysEventThreadCond
);
429 if (SysEventPipes
[0] >= 0)
431 cupsdRemoveSelect(SysEventPipes
[0]);
432 cupsdClosePipe(SysEventPipes
);
438 * 'sysEventThreadEntry()' - A thread to receive power and computer name
439 * change notifications.
442 static void * /* O - Return status/value */
443 sysEventThreadEntry(void)
445 io_object_t powerNotifierObj
;
446 /* Power notifier object */
447 IONotificationPortRef powerNotifierPort
;
448 /* Power notifier port */
449 SCDynamicStoreRef store
= NULL
;/* System Config dynamic store */
450 CFRunLoopSourceRef powerRLS
= NULL
,/* Power runloop source */
451 storeRLS
= NULL
;/* System Config runloop source */
452 CFStringRef key
[6], /* System Config keys */
453 pattern
[2]; /* System Config patterns */
454 CFArrayRef keys
= NULL
, /* System Config key array*/
455 patterns
= NULL
;/* System Config pattern array */
456 SCDynamicStoreContext storeContext
; /* Dynamic store context */
457 CFRunLoopTimerContext timerContext
; /* Timer context */
458 cupsd_thread_data_t threadData
; /* Thread context data for the *
459 * runloop notifiers */
463 * Register for power state change notifications
466 bzero(&threadData
, sizeof(threadData
));
468 threadData
.sysevent
.powerKernelPort
=
469 IORegisterForSystemPower(&threadData
, &powerNotifierPort
,
470 sysEventPowerNotifier
, &powerNotifierObj
);
472 if (threadData
.sysevent
.powerKernelPort
)
474 powerRLS
= IONotificationPortGetRunLoopSource(powerNotifierPort
);
475 CFRunLoopAddSource(CFRunLoopGetCurrent(), powerRLS
, kCFRunLoopDefaultMode
);
478 DEBUG_puts("sysEventThreadEntry: error registering for system power "
482 * Register for system configuration change notifications
485 bzero(&storeContext
, sizeof(storeContext
));
486 storeContext
.info
= &threadData
;
488 store
= SCDynamicStoreCreate(kCFAllocatorDefault
, CFSTR("cupsd"),
489 sysEventConfigurationNotifier
, &storeContext
);
491 if (!ComputerNameKey
)
492 ComputerNameKey
= SCDynamicStoreKeyCreateComputerName(kCFAllocatorDefault
);
495 BTMMKey
= SCDynamicStoreKeyCreate(kCFAllocatorDefault
,
496 CFSTR("Setup:/Network/BackToMyMac"));
498 if (!NetworkGlobalKeyIPv4
)
499 NetworkGlobalKeyIPv4
=
500 SCDynamicStoreKeyCreateNetworkGlobalEntity(kCFAllocatorDefault
,
501 kSCDynamicStoreDomainState
,
504 if (!NetworkGlobalKeyIPv6
)
505 NetworkGlobalKeyIPv6
=
506 SCDynamicStoreKeyCreateNetworkGlobalEntity(kCFAllocatorDefault
,
507 kSCDynamicStoreDomainState
,
510 if (!NetworkGlobalKeyDNS
)
511 NetworkGlobalKeyDNS
=
512 SCDynamicStoreKeyCreateNetworkGlobalEntity(kCFAllocatorDefault
,
513 kSCDynamicStoreDomainState
,
517 HostNamesKey
= SCDynamicStoreKeyCreateHostNames(kCFAllocatorDefault
);
519 if (!NetworkInterfaceKeyIPv4
)
520 NetworkInterfaceKeyIPv4
=
521 SCDynamicStoreKeyCreateNetworkInterfaceEntity(kCFAllocatorDefault
,
522 kSCDynamicStoreDomainState
,
526 if (!NetworkInterfaceKeyIPv6
)
527 NetworkInterfaceKeyIPv6
=
528 SCDynamicStoreKeyCreateNetworkInterfaceEntity(kCFAllocatorDefault
,
529 kSCDynamicStoreDomainState
,
533 if (store
&& ComputerNameKey
&& HostNamesKey
&&
534 NetworkGlobalKeyIPv4
&& NetworkGlobalKeyIPv6
&& NetworkGlobalKeyDNS
&&
535 NetworkInterfaceKeyIPv4
&& NetworkInterfaceKeyIPv6
)
537 key
[0] = ComputerNameKey
;
539 key
[2] = NetworkGlobalKeyIPv4
;
540 key
[3] = NetworkGlobalKeyIPv6
;
541 key
[4] = NetworkGlobalKeyDNS
;
542 key
[5] = HostNamesKey
;
544 pattern
[0] = NetworkInterfaceKeyIPv4
;
545 pattern
[1] = NetworkInterfaceKeyIPv6
;
547 keys
= CFArrayCreate(kCFAllocatorDefault
, (const void **)key
,
548 sizeof(key
) / sizeof(key
[0]),
549 &kCFTypeArrayCallBacks
);
551 patterns
= CFArrayCreate(kCFAllocatorDefault
, (const void **)pattern
,
552 sizeof(pattern
) / sizeof(pattern
[0]),
553 &kCFTypeArrayCallBacks
);
555 if (keys
&& patterns
&&
556 SCDynamicStoreSetNotificationKeys(store
, keys
, patterns
))
558 if ((storeRLS
= SCDynamicStoreCreateRunLoopSource(kCFAllocatorDefault
,
561 CFRunLoopAddSource(CFRunLoopGetCurrent(), storeRLS
,
562 kCFRunLoopDefaultMode
);
565 DEBUG_printf(("sysEventThreadEntry: SCDynamicStoreCreateRunLoopSource "
566 "failed: %s\n", SCErrorString(SCError())));
569 DEBUG_printf(("sysEventThreadEntry: SCDynamicStoreSetNotificationKeys "
570 "failed: %s\n", SCErrorString(SCError())));
573 DEBUG_printf(("sysEventThreadEntry: SCDynamicStoreCreate failed: %s\n",
574 SCErrorString(SCError())));
583 * Set up a timer to delay the wake change notifications.
585 * The initial time is set a decade or so into the future, we'll adjust
589 bzero(&timerContext
, sizeof(timerContext
));
590 timerContext
.info
= &threadData
;
592 threadData
.timerRef
=
593 CFRunLoopTimerCreate(kCFAllocatorDefault
,
594 CFAbsoluteTimeGetCurrent() + (86400L * 365L * 10L),
595 86400L * 365L * 10L, 0, 0, sysEventTimerNotifier
,
597 CFRunLoopAddTimer(CFRunLoopGetCurrent(), threadData
.timerRef
,
598 kCFRunLoopDefaultMode
);
601 * Store our runloop in a global so the main thread can use it to stop us.
604 pthread_mutex_lock(&SysEventThreadMutex
);
606 SysEventRunloop
= CFRunLoopGetCurrent();
608 pthread_cond_signal(&SysEventThreadCond
);
609 pthread_mutex_unlock(&SysEventThreadMutex
);
612 * Disappear into the runloop until it's stopped by the main thread.
618 * Clean up before exiting.
621 if (threadData
.timerRef
)
623 CFRunLoopRemoveTimer(CFRunLoopGetCurrent(), threadData
.timerRef
,
624 kCFRunLoopDefaultMode
);
625 CFRelease(threadData
.timerRef
);
628 if (threadData
.sysevent
.powerKernelPort
)
630 CFRunLoopRemoveSource(CFRunLoopGetCurrent(), powerRLS
,
631 kCFRunLoopDefaultMode
);
632 IODeregisterForSystemPower(&powerNotifierObj
);
633 IOServiceClose(threadData
.sysevent
.powerKernelPort
);
634 IONotificationPortDestroy(powerNotifierPort
);
639 CFRunLoopRemoveSource(CFRunLoopGetCurrent(), storeRLS
,
640 kCFRunLoopDefaultMode
);
641 CFRunLoopSourceInvalidate(storeRLS
);
653 * 'sysEventPowerNotifier()' - Handle power notification events.
657 sysEventPowerNotifier(
658 void *context
, /* I - Thread context data */
659 io_service_t service
, /* I - Unused service info */
660 natural_t messageType
, /* I - Type of message */
661 void *messageArgument
) /* I - Message data */
663 int sendit
= 1; /* Send event to main thread? *
664 * (0 = no, 1 = yes, 2 = delayed */
665 cupsd_thread_data_t
*threadData
; /* Thread context data */
668 threadData
= (cupsd_thread_data_t
*)context
;
670 (void)service
; /* anti-compiler-warning-code */
674 case kIOMessageCanSystemPowerOff
:
675 case kIOMessageCanSystemSleep
:
676 threadData
->sysevent
.event
|= SYSEVENT_CANSLEEP
;
679 case kIOMessageSystemWillRestart
:
680 case kIOMessageSystemWillPowerOff
:
681 case kIOMessageSystemWillSleep
:
682 threadData
->sysevent
.event
|= SYSEVENT_WILLSLEEP
;
685 case kIOMessageSystemHasPoweredOn
:
687 * Because powered on is followed by a net-changed event, delay
692 threadData
->sysevent
.event
|= SYSEVENT_WOKE
;
695 case kIOMessageSystemWillNotPowerOff
:
696 case kIOMessageSystemWillNotSleep
:
697 # ifdef kIOMessageSystemWillPowerOn
698 case kIOMessageSystemWillPowerOn
:
699 # endif /* kIOMessageSystemWillPowerOn */
706 IOAllowPowerChange(threadData
->sysevent
.powerKernelPort
,
707 (long)messageArgument
);
710 threadData
->sysevent
.powerNotificationID
= (long)messageArgument
;
715 * Send the event to the main thread now.
718 write(SysEventPipes
[1], &threadData
->sysevent
,
719 sizeof(threadData
->sysevent
));
720 threadData
->sysevent
.event
= 0;
725 * Send the event to the main thread after 1 to 2 seconds.
728 CFRunLoopTimerSetNextFireDate(threadData
->timerRef
,
729 CFAbsoluteTimeGetCurrent() + 2);
736 * 'sysEventConfigurationNotifier()' - Network configuration change notification
741 sysEventConfigurationNotifier(
742 SCDynamicStoreRef store
, /* I - System data (unused) */
743 CFArrayRef changedKeys
, /* I - Changed data */
744 void *context
) /* I - Thread context data */
746 cupsd_thread_data_t
*threadData
; /* Thread context data */
749 threadData
= (cupsd_thread_data_t
*)context
;
751 (void)store
; /* anti-compiler-warning-code */
753 CFRange range
= CFRangeMake(0, CFArrayGetCount(changedKeys
));
755 if (CFArrayContainsValue(changedKeys
, range
, ComputerNameKey
) ||
756 CFArrayContainsValue(changedKeys
, range
, BTMMKey
))
757 threadData
->sysevent
.event
|= SYSEVENT_NAMECHANGED
;
760 threadData
->sysevent
.event
|= SYSEVENT_NETCHANGED
;
763 * Indicate the network interface list needs updating...
770 * Because we registered for several different kinds of change notifications
771 * this callback usually gets called several times in a row. We use a timer to
772 * de-bounce these so we only end up generating one event for the main thread.
775 CFRunLoopTimerSetNextFireDate(threadData
->timerRef
,
776 CFAbsoluteTimeGetCurrent() + 5);
781 * 'sysEventTimerNotifier()' - Handle delayed event notifications.
785 sysEventTimerNotifier(
786 CFRunLoopTimerRef timer
, /* I - Timer information */
787 void *context
) /* I - Thread context data */
789 cupsd_thread_data_t
*threadData
; /* Thread context data */
794 threadData
= (cupsd_thread_data_t
*)context
;
797 * If an event is still pending send it to the main thread.
800 if (threadData
->sysevent
.event
)
802 write(SysEventPipes
[1], &threadData
->sysevent
,
803 sizeof(threadData
->sysevent
));
804 threadData
->sysevent
.event
= 0;
810 * 'sysUpdate()' - Update the current system state.
816 int i
; /* Looping var */
817 cupsd_sysevent_t sysevent
; /* The system event */
818 cupsd_printer_t
*p
; /* Printer information */
822 * Drain the event pipe...
825 while (read((int)SysEventPipes
[0], &sysevent
, sizeof(sysevent
))
828 if (sysevent
.event
& SYSEVENT_CANSLEEP
)
831 * If there are active printers that don't have the connecting-to-device
832 * printer-state-reason then cancel the sleep request (i.e. this reason
833 * indicates a job that is not yet connected to the printer)...
836 for (p
= (cupsd_printer_t
*)cupsArrayFirst(Printers
);
838 p
= (cupsd_printer_t
*)cupsArrayNext(Printers
))
842 for (i
= 0; i
< p
->num_reasons
; i
++)
843 if (!strcmp(p
->reasons
[i
], "connecting-to-device"))
846 if (!p
->num_reasons
|| i
>= p
->num_reasons
)
853 cupsdLogMessage(CUPSD_LOG_INFO
,
854 "System sleep canceled because printer %s is active",
856 IOCancelPowerChange(sysevent
.powerKernelPort
,
857 sysevent
.powerNotificationID
);
861 cupsdLogMessage(CUPSD_LOG_DEBUG
, "System wants to sleep");
862 IOAllowPowerChange(sysevent
.powerKernelPort
,
863 sysevent
.powerNotificationID
);
867 if (sysevent
.event
& SYSEVENT_WILLSLEEP
)
869 cupsdLogMessage(CUPSD_LOG_DEBUG
, "System going to sleep");
873 for (p
= (cupsd_printer_t
*)cupsArrayFirst(Printers
);
875 p
= (cupsd_printer_t
*)cupsArrayNext(Printers
))
877 cupsdLogMessage(CUPSD_LOG_DEBUG
,
878 "Deregistering local printer \"%s\"", p
->name
);
879 cupsdDeregisterPrinter(p
, 0);
884 #ifdef kIOPMAssertionTypeDenySystemSleep
886 * Remove our assertion as needed since the user wants the system to
887 * sleep (different than idle sleep)...
892 cupsdLogMessage(CUPSD_LOG_DEBUG
, "Releasing dark wake assertion.");
893 IOPMAssertionRelease(keep_awake
);
896 #endif /* kIOPMAssertionTypeDenySystemSleep */
899 * If we have no printing jobs, allow the power change immediately.
900 * Otherwise set the SleepJobs time to 15 seconds in the future when
901 * we'll take more drastic measures...
904 if (cupsArrayCount(PrintingJobs
) == 0)
905 IOAllowPowerChange(sysevent
.powerKernelPort
,
906 sysevent
.powerNotificationID
);
910 * If there are active printers that don't have the connecting-to-device
911 * printer-state-reason then delay the sleep request (i.e. this reason
912 * indicates a job that is not yet connected to the printer)...
915 for (p
= (cupsd_printer_t
*)cupsArrayFirst(Printers
);
917 p
= (cupsd_printer_t
*)cupsArrayNext(Printers
))
921 for (i
= 0; i
< p
->num_reasons
; i
++)
922 if (!strcmp(p
->reasons
[i
], "connecting-to-device"))
925 if (!p
->num_reasons
|| i
>= p
->num_reasons
)
932 LastSysEvent
= sysevent
;
933 SleepJobs
= time(NULL
) + 10;
937 IOAllowPowerChange(sysevent
.powerKernelPort
,
938 sysevent
.powerNotificationID
);
943 if (sysevent
.event
& SYSEVENT_WOKE
)
945 cupsdLogMessage(CUPSD_LOG_DEBUG
, "System woke from sleep");
946 IOAllowPowerChange(sysevent
.powerKernelPort
,
947 sysevent
.powerNotificationID
);
950 #ifdef kIOPMAssertionTypeDenySystemSleep
951 if (cupsArrayCount(PrintingJobs
) > 0 && !keep_awake
)
953 cupsdLogMessage(CUPSD_LOG_DEBUG
, "Asserting dark wake.");
954 IOPMAssertionCreateWithName(kIOPMAssertionTypeDenySystemSleep
,
955 kIOPMAssertionLevelOn
,
956 CFSTR("org.cups.cupsd"), &keep_awake
);
958 #endif /* kIOPMAssertionTypeDenySystemSleep */
963 if (sysevent
.event
& SYSEVENT_NETCHANGED
)
966 cupsdLogMessage(CUPSD_LOG_DEBUG
,
967 "System network configuration changed");
969 cupsdLogMessage(CUPSD_LOG_DEBUG
,
970 "System network configuration changed; "
971 "ignored while sleeping");
974 if (sysevent
.event
& SYSEVENT_NAMECHANGED
)
978 cupsdLogMessage(CUPSD_LOG_DEBUG
,
979 "Computer name or BTMM domains changed");
982 * De-register the individual printers...
985 for (p
= (cupsd_printer_t
*)cupsArrayFirst(Printers
);
987 p
= (cupsd_printer_t
*)cupsArrayNext(Printers
))
988 cupsdDeregisterPrinter(p
, 1);
990 # if defined(HAVE_DNSSD) || defined(HAVE_AVAHI)
992 * Update the computer name and BTMM domain list...
995 cupsdUpdateDNSSDName();
996 # endif /* HAVE_DNSSD || HAVE_AVAHI */
999 * Now re-register them...
1002 for (p
= (cupsd_printer_t
*)cupsArrayFirst(Printers
);
1004 p
= (cupsd_printer_t
*)cupsArrayNext(Printers
))
1005 cupsdRegisterPrinter(p
);
1008 cupsdLogMessage(CUPSD_LOG_DEBUG
,
1009 "Computer name or BTMM domains changed; ignored while "
1014 #endif /* __APPLE__ */