The /etc/cups/cupsd.conf file contains configuration directives that control how the server functions. Each directive is listed on a line by itself followed by its value. Comments are introduced using the number sign ("#") character at the beginning of a line.
Since the server configuration file consists of plain text,
you can use your favorite text editor to make changes to it.
After making any changes, restart the cupsd(8)
process using the startup script for your operating system:
/etc/init.d/cups restart
/sbin/init.d/cups restart
/etc/init.d/cups restart
/etc/init.d/cups restart
/System/Library/StartupItems/PrintingServices/PrintingServices restart
/etc/init.d/cups restart
You can also edit this file from the CUPS web interface, which automatically handles restarting the scheduler.
AccessLog /var/log/cups/access_log AccessLog /var/log/cups/access_log-%s AccessLog syslog
The AccessLog directive sets the name of the
access log file. If the filename is not absolute then it is
assumed to be relative to the ServerRoot directory. The
access log file is stored in "common log format" and can be used
by any web access reporting tool to generate a report on CUPS
server activity.
The server name can be included in the filename by using
%s in the name.
The special name "syslog" can be used to send the access information to the system log instead of a plain file.
The default access log file is /var/log/cups/access_log.
Allow from All Allow from None Allow from *.domain.com Allow from .domain.com Allow from host.domain.com Allow from nnn.* Allow from nnn.nnn.* Allow from nnn.nnn.nnn.* Allow from nnn.nnn.nnn.nnn Allow from nnn.nnn.nnn.nnn/mm Allow from nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm Allow from xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx Allow from @LOCAL Allow from @IF(name)
The Allow directive specifies a hostname, IP address,
or network that is allowed access to the server. Allow
directives are cummulative, so multiple Allow directives
can be used to allow access for multiple hosts or networks. The
/mm notation specifies a CIDR netmask:
| mm | netmask | mm | netmask |
|---|---|---|---|
| 0 | 0.0.0.0 | 8 | 255.0.0.0 |
| 1 | 128.0.0.0 | 16 | 255.255.0.0 |
| 2 | 192.0.0.0 | 24 | 255.255.255.0 |
| ... | ... | 32 | 255.255.255.255 |
The @LOCAL name will allow access from all local
interfaces. The @IF(name) name will allow access
from the named interface.
The Allow directive must appear inside a Location directive.
AuthClass Anonymous AuthClass User AuthClass System AuthClass Group
The AuthClass directive defines what level of
authentication is required:
Anonymous - No authentication should be
performed (default)User - A valid username and password is
requiredSystem - A valid username and password
is required, and the username must belong to the "sys"
group; this can be changed using the SystemGroup
directiveGroup - A valid username and password is
required, and the username must belong to the group named
by the AuthGroupName
directiveThe AuthClass directive must appear inside a Location directive.
This directive is deprecated and will be removed from a
future release of CUPS. Consider using the more flexible Require directive instead.
AuthGroupName mygroup AuthGroupName lp
The AuthGroupName directive sets the group to use
for Group authentication.
The AuthGroupName directive must appear inside a
Location directive.
This directive is deprecated and will be removed from a
future release of CUPS. Consider using the more flexible Require directive instead.
AuthType None AuthType Basic AuthType Digest AuthType BasicDigest
The AuthType directive defines the type of
authentication to perform:
None - No authentication should be
performed (default)Basic - Basic authentication should be
performed using the UNIX password and group filesDigest - Digest authentication should be
performed using the /etc/cups/passwd.md5
fileBasicDigest - Basic authentication
should be performed using the
/etc/cups/passwd.md5 fileWhen using Basic, Digest, or
BasicDigest authentication, clients connecting
through the localhost interface can also
authenticate using certificates.
The AuthType directive must appear inside a Location directive.
AutoPurgeJobs Yes AutoPurgeJobs No
The AutoPurgeJobs directive specifies whether or
not to purge completed jobs once they are no longer required for
quotas. This option has no effect if quotas are not enabled. The
default setting is No.
BrowseAddress 255.255.255.255:631 BrowseAddress 192.0.2.255:631 BrowseAddress host.domain.com:631 BrowseAddress @LOCAL BrowseAddress @IF(name)
The BrowseAddress directive specifies an address
to send browsing information to. Multiple
BrowseAddress directives can be specified to send
browsing information to different networks or systems.
The @LOCAL name will broadcast printer
information to all local interfaces. The @IF(name)
name will broadcast to the named interface.
There is no default browse address.
Note:If you are using HP-UX 10.20 and a subnet that is not 24, 16, or 8 bits, printer browsing (and in fact all broadcast reception) will not work. This problem appears to be fixed in HP-UX 11.0.
BrowseAllow from all BrowseAllow from none BrowseAllow from 192.0.2 BrowseAllow from 192.0.2.0/24 BrowseAllow from 192.0.2.0/255.255.255.0 BrowseAllow from *.domain.com BrowseAllow from @LOCAL BrowseAllow from @IF(name)
The BrowseAllow directive specifies a system or
network to accept browse packets from. The default is to accept
browse packets from all hosts.
Host and domain name matching require that you enable the HostNameLookups
directive.
IP address matching supports exact matches, partial addresses that match networks using netmasks of 255.0.0.0, 255.255.0.0, and 255.255.255.0, or network addresses using the specified netmask or bit count.
The @LOCAL name will allow browse data from all
local interfaces. The @IF(name) name will allow
browse data from the named interface.
BrowseDeny from all BrowseDeny from none BrowseDeny from 192.0.2 BrowseDeny from 192.0.2.0/24 BrowseDeny from 192.0.2.0/255.255.255.0 BrowseDeny from *.domain.com BrowseDeny from @LOCAL BrowseDeny from @IF(name)
The BrowseDeny directive specifies a system or
network to reject browse packets from. The default is to not deny
browse packets from any hosts.
Host and domain name matching require that you enable the HostNameLookups
directive.
IP address matching supports exact matches, partial addresses that match networks using netmasks of 255.0.0.0, 255.255.0.0, and 255.255.255.0, or network addresses using the specified netmask or bit count.
The @LOCAL name will block browse data from all
local interfaces. The @IF(name) name will block
browse data from the named interface.
BrowseOrder allow,deny BrowseOrder deny,allow
The BrowseOrder directive specifies the order of
allow/deny processing. The default order is
deny,allow:
allow,deny - Deny browse packets by
default, then check BrowseAllow lines
followed by BrowseDeny lines.deny,allow - Allow browse packets by
default, then check BrowseDeny lines
followed by BrowseAllow lines.BrowseInterval 0 BrowseInterval 30
The BrowseInterval directive specifies the
maximum amount of time between browsing updates. Specifying a
value of 0 seconds disables outgoing browse updates but allows a
server to receive printer information from other hosts.
The BrowseInterval value should always be less
than the BrowseTimeout
value. Otherwise printers and classes will disappear from client
systems between updates.
BrowsePoll 192.0.2.2:631 BrowsePoll host.domain.com:631
The BrowsePoll directive polls a server for
available printers once every BrowseInterval seconds.
Multiple BrowsePoll directives can be specified to
poll multiple servers.
If BrowseInterval is set to 0 then the server is
polled once every 30 seconds.
BrowsePort 631 BrowsePort 9999
The BrowsePort directive specifies the UDP port number
used for browse packets. The default port number is 631.
Note:You must set the
BrowsePortto the same value on all of the systems that you want to see.
BrowseProtocols CUPS BrowseProtocols SLP BrowseProtocols CUPS SLP BrowseProtocols all
The BrowseProtocols directive specifies the
protocols to use when collecting and distributing shared printers
on the local network. The default protocol is CUPS,
which is a broadcast-based protocol.
Note:When using the
SLPprotocol, you must have at least one Directory Agent (DA) server on your network. Otherwise the CUPS scheduler (cupsd) will not respond to client requests for several seconds while polling the network.
BrowseRelay 193.0.2.1 192.0.2.255 BrowseRelay 193.0.2.0/255.255.255.0 192.0.2.255 BrowseRelay 193.0.2.0/24 192.0.2.255 BrowseRelay *.domain.com 192.0.2.255 BrowseRelay host.domain.com 192.0.2.255
The BrowseRelay directive specifies source and
destination addresses for relaying browsing information from one
host or network to another. Multiple BrowseRelay
directives can be specified as needed.
BrowseRelay is typically used on systems that
bridge multiple subnets using one or more network interfaces. It
can also be used to relay printer information from polled servers
with the line:
BrowseRelay 127.0.0.1 @LOCAL
This effectively provides access to printers on a WAN for all clients on the LAN(s).
BrowseShortNames Yes BrowseShortNames No
The BrowseShortNames directive specifies whether
or not short names are used for remote printers when possible.
Short names are just the remote printer name, without the server
("printer"). If more than one remote printer is detected with the
same name, the printers will have long names ("printer@server1",
"printer@server2".)
The default value for this option is Yes.
BrowseTimeout 300 BrowseTimeout 60
The BrowseTimeout directive sets the timeout for
printer or class information that is received in browse packets.
Once a printer or class times out it is removed from the list of
available destinations.
The BrowseTimeout value should always be greater
than the BrowseInterval value.
Otherwise printers and classes will disappear from client systems
between updates.
Browsing On Browsing Off
The Browsing directive controls whether or not
network printer browsing is enabled. The default setting is
On.
This directive does not enable sharing of local printers by
itself; you must also use the BrowseAddress or BrowseProtocols
directives to advertise local printers to other systems.
Note:If you are using HP-UX 10.20 and a subnet that is not 24, 16, or 8 bits, printer browsing (and in fact all broadcast reception) will not work. This problem appears to be fixed in HP-UX 11.0.
Classification Classification classified Classification confidential Classification secret Classification topsecret Classification unclassified
The Classification directive sets the
classification level on the server. When this option is set, at
least one of the banner pages is forced to the classification
level, and the classification is placed on each page of output.
The default is no classification level.
ClassifyOverride Yes ClassifyOverride No
The ClassifyOverride directive specifies whether
users can override the default classification level on the
server. When the server classification is set, users can change
the classification using the job-sheets option and
can choose to only print one security banner before or after the
job. If the job-sheets option is set to
none then the server default classification is
used.
The default is to not allow classification overrides.
ConfigFilePerm 0644 ConfigFilePerm 0600
The ConfigFilePerm directive specifies the
permissions to use when writing configuration files. The default
is 0600.
DataDir /usr/share/cups
The DataDir directive sets the directory to use
for data files.
DefaultCharset utf-8 DefaultCharset iso-8859-1 DefaultCharset windows-1251
The DefaultCharset directive sets the default
character set to use for client connections. The default
character set is utf-8 but is overridden by the
character set for the language specified by the client or the
DefaultLanguage directive.
DefaultLanguage de DefaultLanguage en DefaultLanguage es DefaultLanguage fr DefaultLanguage it
The DefaultLanguage directive specifies the
default language to use for client connections. Setting the
default language also sets the default character set if a
language localization file exists for it. The default language
is "en" for English.
Deny from All Deny from None Deny from *.domain.com Deny from .domain.com Deny from host.domain.com Deny from nnn.* Deny from nnn.nnn.* Deny from nnn.nnn.nnn.* Deny from nnn.nnn.nnn.nnn Deny from nnn.nnn.nnn.nnn/mm Deny from nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm Deny from xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx Deny from @LOCAL Deny from @IF(name)
The Deny directive specifies a hostname, IP
address, or network that is allowed access to the server.
Deny directives are cummulative, so multiple
Deny directives can be used to allow access for
multiple hosts or networks. The /mm notation
specifies a CIDR netmask:
| mm | netmask | mm | netmask |
|---|---|---|---|
| 0 | 0.0.0.0 | 8 | 255.0.0.0 |
| 1 | 128.0.0.0 | 16 | 255.255.0.0 |
| 2 | 192.0.0.0 | 24 | 255.255.255.0 |
| ... | ... | 32 | 255.255.255.255 |
The @LOCAL name will deny access from all local
interfaces. The @IF(name) name will deny access from
the named interface.
The Deny directive must appear inside a Location directive.
DocumentRoot /usr/share/doc/cups DocumentRoot /foo/bar/doc/cups
The DocumentRoot directive specifies the location
of web content for the HTTP server in CUPS. If an absolute path
is not specified then it is assumed to be relative to the ServerRoot directory. The
default directory is /usr/share/doc/cups.
Documents are first looked up in a sub-directory for the
primary language requested by the client (e.g.
/usr/share/doc/cups/fr/...) and then directly under
the DocumentRoot directory (e.g.
/usr/share/doc/cups/...), so it is possible to
localize the web content by providing subdirectories for each
language needed.
Encryption Never Encryption IfRequested Encryption Required
The Encryption directive must appear instead a Location section and specifies
the encryption settings for that location. The default setting is
IfRequested for all locations.
ErrorLog /var/log/cups/error_log ErrorLog /var/log/cups/error_log-%s ErrorLog syslog
The ErrorLog directive sets the name of the error
log file. If the filename is not absolute then it is assumed to
be relative to the ServerRoot directory. The
default error log file is /var/log/cups/error_log.
The server name can be included in the filename by using
%s in the name.
The special name "syslog" can be used to send the error information to the system log instead of a plain file.
FileDevice Yes FileDevice No
The FileDevice directive determines whether the
scheduler allows new printers to be added using device URIs of
the form file:/filename. File devices are most often
used to test new printer drivers and do not support raw file
printing.
The default setting is No.
Note:File devices are managed by the scheduler. Since the scheduler normally runs as the root user, file devices can be used to overwrite system files and potentially gain unauthorized access to the system. If you must create printers using file devices, we recommend that you set the
FileDevicedirective toYesfor only as long as you need to add the printers to the system, and then reset the directive toNo.
FilterLimit 0 FilterLimit 200 FilterLimit 1000
The FilterLimit directive sets the maximum cost
of all running job filters. It can be used to limit the number of
filter programs that are run on a server to minimize disk,
memory, and CPU resource problems. A limit of 0 disables filter
limiting.
An average print to a non-PostScript printer needs a filter limit of about 200. A PostScript printer needs about half that (100). Setting the limit below these thresholds will effectively limit the scheduler to printing a single job at any time.
The default limit is 0.
FontPath /foo/bar/fonts FontPath /usr/share/cups/fonts:/foo/bar/fonts
The FontPath directive specifies the font path to
use when searching for fonts. The default font path is
/usr/share/cups/fonts.
Group nobody
The Group directive specifies the UNIX group that
filter and CGI programs run as. The default group is
nobody.
HideImplicitMembers Yes HideImplicitMembers No
The HideImplicitMembers directive controls
whether the individual printers in an implicit class are hidden
from the user. The default is Yes.
ImplicitClasses
must be enabled for this directive to have any effect.
HostNameLookups On HostNameLookups Off HostNameLookups Double
The HostNameLookups directive controls whether or
not CUPS looks up the hostname for connecting clients. The
Double setting causes CUPS to verify that the
hostname resolved from the address matches one of the addresses
returned for that hostname. Double lookups also
prevent clients with unregistered addresses from connecting to
your server.
The default is Off to avoid the potential server
performance problems with hostname lookups. Set this option to
On or Double only if absolutely
required.
ImplicitClasses On ImplicitClasses Off
The ImplicitClasses directive controls whether
implicit classes are created based upon the available network
printers and classes. The default setting is On but
is automatically turned Off if Browsing is turned
Off.
ImplicitAnyClasses On ImplicitAnyClasses Off
The ImplicitAnyClasses directive controls
whether implicit classes for local and remote printers are
created with the name AnyPrinter. The default
setting is Off.
ImplicitClasses
must be enabled for this directive to have any effect.
Include filename Include /foo/bar/filename
The Include directive includes the named file in
the cupsd.conf file. If no leading path is provided,
the file is assumed to be relative to the ServerRoot directory.
KeepAlive On KeepAlive Off
The KeepAlive directive controls whether or not
to support persistent HTTP connections. The default is
On.
HTTP/1.1 clients automatically support persistent connections,
while HTTP/1.0 clients must specifically request them using the
Keep-Alive attribute in the Connection:
field of each request.
KeepAliveTimeout 60 KeepAliveTimeout 30
The KeepAliveTimeout directive controls how long
a persistent HTTP connection will remain open after the last
request. The default is 60 seconds.
<Limit GET POST> ... </Limit> <Limit ALL> ... </Limit>
The Limit directive groups access control
directives for specific types of HTTP requests and must appear
inside a Location section.
Access can be limited for individual request types
(DELETE, GET, HEAD,
OPTIONS, POST, PUT, and
TRACE) or for all request types (ALL).
The request type names are case-sensitive for compatibility with
Apache.
<LimitExcept GET POST> ... </LimitExcept>
The LimitExcept directive groups access control
directives for specific types of HTTP requests and must appear
inside a Location section.
Unlike the Limit directive,
LimitExcept restricts access for all requests
except those listed on the LimitExcept
line.
LimitRequestBody 10485760 LimitRequestBody 10m LimitRequestBody 0
The LimitRequestBody directive controls the
maximum size of print files, IPP requests, and HTML form data in
HTTP POST requests. The default limit is 0 which disables the
limit check.
Listen 127.0.0.1:631 Listen 192.0.2.1:631 Listen [::1]:631 Listen *:631
The Listen directive specifies a network address
and port to listen for connections. Multiple Listen
directives can be provided to listen on multiple addresses.
The Listen directive is similar to the Port directive but allows you to
restrict access to specific interfaces or networks.
<Location /> ... </Location> <Location /admin> ... </Location> <Location /admin/conf> ... </Location> <Location /admin/log> ... </Location> <Location /classes> ... </Location> <Location /classes/name> ... </Location> <Location /jobs> ... </Location> <Location /printers> ... </Location> <Location /printers/name> ... </Location>
The Location directive specifies access control
and authentication options for the specified HTTP resource or
path. The Allow, AuthType, Deny, Encryption, Limit, LimitExcept, Order, Require, and Satisfy directives may all
appear inside a location.
Note that more specific resources override the less specific
ones. So the directives inside the /printers/name
location will override ones from /printers.
Directives inside /printers will override ones from
/. None of the directives are inherited.
| Location | Description |
|---|---|
/ | The path for all get operations (get-printers, get-jobs, etc.) |
/admin | The path for all administration operations (add-printer, delete-printer, start-printer, etc.) |
/admin/conf | The path for access to the CUPS configuration files (cupsd.conf, client.conf, etc.) |
/admin/log | The path for access to the CUPS log files (access_log, error_log, page_log) |
/classes | The path for all classes |
/classes/name | The resource for class name |
/jobs | The path for all jobs (hold-job, release-job, etc.) |
/jobs/id | The resource for job id |
/printers | The path for all printers |
/printers/name | The path for printer name |
/printers/name.ppd | The PPD file path for printer name |
LogFilePerm 0644 LogFilePerm 0600
The LogFilePerm directive specifies the
permissions to use when writing configuration files. The default
is 0644.
LogLevel none LogLevel emerg LogLevel alert LogLevel crit LogLevel error LogLevel warn LogLevel notice LogLevel info LogLevel debug LogLevel debug2
The LogLevel directive specifies the level of
logging for the ErrorLog
file. The following values are recognized (each level logs
everything under the preceding levels):
none - Log nothingemerg - Log emergency conditions that
prevent the server from runningalert - Log alerts that must be handled
immediatelycrit - Log critical errors that don't
prevent the server from runningerror - Log general errorswarn - Log errors and warningsnotice - Log temporary error conditionsinfo - Log all requests and state
changes (default)debug - Log basic debugging
informationdebug2 - Log all debugging
informationMaxClients 100 MaxClients 1024
The MaxClients directive controls the maximum
number of simultaneous clients that will be allowed by the
server. The default is 100 clients.
Note:Since each print job requires a file descriptor for the status pipe, the scheduler internally limits the
MaxClientsvalue to 1/3 of the available file descriptors to avoid possible problems when printing large numbers of jobs.
MaxClientsPerHost 10
The MaxClientsPerHost directive controls the
maximum number of simultaneous clients that will be allowed from
a single host by the server. The default is the
MaxClients value.
This directive provides a small measure of protection against Denial of Service attacks from a single host.
MaxCopies 100 MaxCopies 65535
The MaxCopies directive controls the maximum
number of copies that a user can print of a job. The default is
100 copies.
Note:Most HP PCL laser printers internally limit the number of copies to 100.
MaxJobs 100 MaxJobs 9999 MaxJobs 0
The MaxJobs directive controls the maximum number
of jobs that are kept in memory. Once the number of jobs reaches
the limit, the oldest completed job is automatically purged from
the system to make room for the new one. If all of the known jobs
are still pending or active then the new job will be
rejected.
Setting the maximum size to 0 disables this functionality. The default setting is 0.
MaxJobsPerPrinter 100 MaxJobsPerPrinter 9999 MaxJobsPerPrinter 0
The MaxJobsPerPrinter directive controls the
maximum number of active jobs that are allowed for each printer
or class. Once a printer or class reaches the limit, new jobs
will be rejected until one of the active jobs is completed,
stopped, aborted, or canceled.
Setting the maximum to 0 disables this functionality. The default setting is 0.
MaxJobsPerUser 100 MaxJobsPerUser 9999 MaxJobsPerUser 0
The MaxJobsPerUser directive controls the maximum
number of active jobs that are allowed for each user. Once a user
reaches the limit, new jobs will be rejected until one of the
active jobs is completed, stopped, aborted, or canceled.
Setting the maximum to 0 disables this functionality. The default setting is 0.
MaxLogSize 1048576 MaxLogSize 1m MaxLogSize 0
The MaxLogSize directive controls the maximum
size of each log file. Once a log file reaches or exceeds the
maximum size it is closed and renamed to filename.O.
This allows you to rotate the logs automatically. The default
size is 1048576 bytes (1MB).
Setting the maximum size to 0 disables log rotation.
MaxRequestSize 10485760 MaxRequestSize 10m MaxRequestSize 0
The MaxRequestSize directive controls the maximum
size of print files, IPP requests, and HTML form data in HTTP
POST requests. The default limit is 0 which disables the limit
check.
This directive is deprecated and will be replaced in a
future CUPS release. Use the LimitRequestBody
directive instead.
Order Allow,Deny Order Deny,Allow
The Order directive defines the default access
control. The following values are supported:
allow,deny - Deny requests by default,
then check the Allow
lines followed by the Deny linesdeny,allow - Allow requests by default,
then check the Deny
lines followed by the Allow linesThe Order directive must appear inside a Location directive.
PageLog /var/log/cups/page_log PageLog /var/log/cups/page_log-%s PageLog syslog
The PageLog directive sets the name of the page
log file. If the filename is not absolute then it is assumed to
be relative to the ServerRoot directory. The
default page log file is /var/log/cups/page_log.
The server name can be included in the filename by using
%s in the name.
The special name "syslog" can be used to send the page information to the system log instead of a plain file.
Port 631 Port 80
The Port directive specifies a port to listen on.
Multiple Port lines can be specified to listen on
multiple ports. The Port directive is equivalent to
"Listen *:nnn". The default port is 631.
Note:On systems that support IPv6, this directive will bind to both the IPv4 and IPv6 wildcard address.
PreserveJobHistory On PreserveJobHistory Off
The PreserveJobHistory directive controls whether
the history of completed, canceled, or aborted print jobs is
stored on disk.
A value of On (the default) preserves job
information until the administrator purges it with the
cancel command.
A value of Off removes the job information as
soon as each job is completed, canceled, or aborted.
PreserveJobFiles On PreserveJobFiles Off
The PreserveJobFiles directive controls whether
the document files of completed, canceled, or aborted print jobs
are stored on disk.
A value of On preserves job files until the
administrator purges them with the cancel command.
Jobs can be restarted (and reprinted) as desired until they are
purged.
A value of Off (the default) removes the job
files as soon as each job is completed, canceled, or aborted.
Printcap Printcap /etc/printcap Printcap /etc/printers.conf
The Printcap directive controls whether or not a
printcap file is automatically generated and updated with a list
of available printers. If specified with no value, then no
printcap file will be generated. The default is to generate a
file named /etc/printcap.
When a filename is specified (e.g. /etc/printcap), the printcap file is written whenever a printer is added or removed. The printcap file can then be used by applications that are hardcoded to look at the printcap file for the available printers.
PrintcapFormat BSD PrintcapFormat Solaris
The PrintcapFormat directive controls the output
format of the printcap file. The default is to generate a BSD
printcap file.
RemoteRoot remroot RemoteRoot root
The RemoteRoot directive sets the username for
unauthenticated root requests from remote hosts. The default
username is remroot. Setting RemoteRoot
to root effectively disables this security
mechanism.
RequestRoot /var/spool/cups RequestRoot /foo/bar/spool/cups
The RequestRoot directive sets the directory for
incoming IPP requests and HTML forms. If an absolute path is not
provided then it is assumed to be relative to the ServerRoot directory. The
default request directory is /var/spool/cups.
Require group foo bar Require user john mary Require valid-user Require user @groupname Require user @SYSTEM Require user @OWNER
The Require directive specifies that
authentication is required for the resource. The
group keyword specifies that the authenticated user
must be a member of one or more of the named groups that
follow.
The user keyboard specifies that the
authenticated user must be one of the named users or groups that
follow. Group names are specified using the "@" prefix.
The valid-user keyword specifies that any
authenticated user may access the resource.
The default is to do no authentication. This directive must
appear inside a Location
directive.
RIPCache 8m RIPCache 1g RIPCache 2048k
The RIPCache directive sets the size of the
memory cache used by Raster Image Processor ("RIP") filters such
as imagetoraster and pstoraster. The
size can be suffixed with a "k" for kilobytes, "m" for megabytes,
or "g" for gigabytes. The default cache size is "8m", or 8
megabytes.
Satisfy all Satisfy any
The Satisfy directive specifies whether all
conditions must be satisfied to allow access to the resource. If
set to all, then all authentication and access
control conditions must be satified to allow access.
Setting Satisfy to any allows a user
to gain access if the authentication or access control
requirements are satisfied. For example, you might require
authentication for remote access, but allow local access without
authentication.
The default is all. This directive must appear
inside a Location
directive.
ServerAdmin user@host ServerAdmin root@foo.bar.com
The ServerAdmin directive identifies the email
address for the administrator on the system. By default the
administrator email address is root@server, where
server is the server name.
ServerBin /usr/lib/cups ServerBin /foo/bar/lib/cups
The ServerBin directive sets the directory for
server-run executables. If an absolute path is not provided then
it is assumed to be relative to the ServerRoot directory. The
default executable directory is /usr/lib/cups or
/usr/lib32/cups (IRIX 6.5).
ServerCertificate /etc/cups/ssl/server.crt
The ServerCertificate directive specifies the
location of the SSL certificate file used by the server when
negotiating encrypted connections. The certificate must not be
encrypted (password protected) since the scheduler normally runs
in the background and will be unable to ask for a password.
The default certificate file is /etc/cups/ssl/server.crt.
ServerKey /etc/cups/ssl/server.key
The ServerKey directive specifies the location of
the SSL private key file used by the server when negotiating
encrypted connections.
The default key file is /etc/cups/ssl/server.crt.
ServerName foo.domain.com ServerName myserver.domain.com
The ServerName directive specifies the hostname
that is reported to clients. By default the server name is the
hostname.
ServerRoot /etc/cups ServerRoot /foo/bar/cups
The ServerRoot directive specifies the absolute
path to the server configuration and state files. It is also used
to resolve relative paths in the cupsd.conf file. The
default server directory is /etc/cups.
SSLListen 127.0.0.1:443 SSLListen 192.0.2.1:443
The SSLListen directive specifies a network
address and port to listen for secure connections. Multiple
SSLListen directives can be provided to listen on
multiple addresses.
The SSLListen directive is similar to the SSLPort directive but allows you
to restrict access to specific interfaces or networks.
SSLPort 443
The SSLPort directive specifies a port to listen
on for secure connections. Multiple SSLPort lines
can be specified to listen on multiple ports.
SystemGroup lpadmin SystemGroup sys SystemGroup system SystemGroup root
The SystemGroup directive specifies the system
administration group for System authentication.
TempDir /var/tmp TempDir /foo/bar/tmp
The TempDir directive specifies an absolute path
for the directory to use for temporary files. The default
directory is /var/spool/cups/tmp.
Temporary directories must be world-writable and should have the "sticky" permission bit enabled so that other users cannot delete filter temporary files. The following commands will create an appropriate temporary directory called /foo/bar/tmp:
mkdir /foo/bar/tmp chmod a+rwxt /foo/bar/tmp
Timeout 300 Timeout 90
The Timeout directive controls the amount of time
to wait before an active HTTP or IPP request times out. The
default timeout is 300 seconds.
User lp User guest
The User directive specifies the UNIX user that
filter and CGI programs run as. The default user is
lp.
Note:You may not use user
root, as that would expose the system to unacceptable security risks. The scheduler will automatically choose usernobodyif you specify a user whose ID is 0.