"\t\t(all)" = "\t\t(all)";
-
"\t\t(none)" = "\t\t(none)";
-
"\t%d entries" = "\t%d entries";
-
"\t%s" = "\t%s";
-
"\tAfter fault: continue" = "\tAfter fault: continue";
-
"\tAlerts: %s" = "\tAlerts: %s";
-
"\tBanner required" = "\tBanner required";
-
"\tCharset sets:" = "\tCharset sets:";
-
"\tConnection: direct" = "\tConnection: direct";
-
"\tConnection: remote" = "\tConnection: remote";
-
"\tContent types: any" = "\tContent types: any";
-
"\tDefault page size:" = "\tDefault page size:";
-
"\tDefault pitch:" = "\tDefault pitch:";
-
"\tDefault port settings:" = "\tDefault port settings:";
-
"\tDescription: %s" = "\tDescription: %s";
-
"\tForm mounted:" = "\tForm mounted:";
-
"\tForms allowed:" = "\tForms allowed:";
-
"\tInterface: %s.ppd" = "\tInterface: %s.ppd";
-
"\tInterface: %s/interfaces/%s" = "\tInterface: %s/interfaces/%s";
-
"\tInterface: %s/ppd/%s.ppd" = "\tInterface: %s/ppd/%s.ppd";
-
"\tLocation: %s" = "\tLocation: %s";
-
"\tOn fault: no alert" = "\tOn fault: no alert";
-
"\tPrinter types: unknown" = "\tPrinter types: unknown";
-
"\tStatus: %s" = "\tStatus: %s";
-
"\tUsers allowed:" = "\tUsers allowed:";
-
"\tUsers denied:" = "\tUsers denied:";
-
"\tdaemon present" = "\tdaemon present";
-
"\tno entries" = "\tno entries";
-
"\tprinter is on device '%s' speed -1" = "\tprinter is on device '%s' speed -1";
-
"\tprinting is disabled" = "\tprinting is disabled";
-
"\tprinting is enabled" = "\tprinting is enabled";
-
"\tqueued for %s" = "\tqueued for %s";
-
"\tqueuing is disabled" = "\tqueuing is disabled";
-
"\tqueuing is enabled" = "\tqueuing is enabled";
-
"\treason unknown" = "\treason unknown";
-
"\n DETAILED CONFORMANCE TEST RESULTS" = "\n DETAILED CONFORMANCE TEST RESULTS";
-
-" Ignore specific warnings." = " Ignore specific warnings.";
-
-" Issue warnings instead of errors." = " Issue warnings instead of errors.";
-
+" Ignore specific warnings." = " Ignore specific warnings.";
+" Issue warnings instead of errors." = " Issue warnings instead of errors.";
" REF: Page 15, section 3.1." = " REF: Page 15, section 3.1.";
-
" REF: Page 15, section 3.2." = " REF: Page 15, section 3.2.";
-
" REF: Page 19, section 3.3." = " REF: Page 19, section 3.3.";
-
" REF: Page 20, section 3.4." = " REF: Page 20, section 3.4.";
-
" REF: Page 27, section 3.5." = " REF: Page 27, section 3.5.";
-
" REF: Page 42, section 5.2." = " REF: Page 42, section 5.2.";
-
" REF: Pages 16-17, section 3.2." = " REF: Pages 16-17, section 3.2.";
-
" REF: Pages 42-45, section 5.2." = " REF: Pages 42-45, section 5.2.";
-
" REF: Pages 45-46, section 5.2." = " REF: Pages 45-46, section 5.2.";
-
" REF: Pages 48-49, section 5.2." = " REF: Pages 48-49, section 5.2.";
-
" REF: Pages 52-54, section 5.2." = " REF: Pages 52-54, section 5.2.";
-
" %-39.39s %.0f bytes" = " %-39.39s %.0f bytes";
-
" PASS Default%s" = " PASS Default%s";
-
" PASS DefaultImageableArea" = " PASS DefaultImageableArea";
-
" PASS DefaultPaperDimension" = " PASS DefaultPaperDimension";
-
" PASS FileVersion" = " PASS FileVersion";
-
" PASS FormatVersion" = " PASS FormatVersion";
-
" PASS LanguageEncoding" = " PASS LanguageEncoding";
-
" PASS LanguageVersion" = " PASS LanguageVersion";
-
" PASS Manufacturer" = " PASS Manufacturer";
-
" PASS ModelName" = " PASS ModelName";
-
" PASS NickName" = " PASS NickName";
-
" PASS PCFileName" = " PASS PCFileName";
-
" PASS PSVersion" = " PASS PSVersion";
-
" PASS PageRegion" = " PASS PageRegion";
-
" PASS PageSize" = " PASS PageSize";
-
" PASS Product" = " PASS Product";
-
" PASS ShortNickName" = " PASS ShortNickName";
-
" WARN \"%s %s\" conflicts with \"%s %s\"\n (constraint=\"%s %s %s %s\")." = " WARN \"%s %s\" conflicts with \"%s %s\"\n (constraint=\"%s %s %s %s\").";
-
" WARN %s has no corresponding options." = " WARN %s has no corresponding options.";
-
" WARN %s shares a common prefix with %s\n REF: Page 15, section 3.2." = " WARN %s shares a common prefix with %s\n REF: Page 15, section 3.2.";
-
" WARN Default choices conflicting." = " WARN Default choices conflicting.";
-
" WARN Duplex option keyword %s may not work as expected and should be named Duplex.\n REF: Page 122, section 5.17" = " WARN Duplex option keyword %s may not work as expected and should be named Duplex.\n REF: Page 122, section 5.17";
-
" WARN File contains a mix of CR, LF, and CR LF line endings." = " WARN File contains a mix of CR, LF, and CR LF line endings.";
-
" WARN LanguageEncoding required by PPD 4.3 spec.\n REF: Pages 56-57, section 5.3." = " WARN LanguageEncoding required by PPD 4.3 spec.\n REF: Pages 56-57, section 5.3.";
-
" WARN Line %d only contains whitespace." = " WARN Line %d only contains whitespace.";
-
" WARN Manufacturer required by PPD 4.3 spec.\n REF: Pages 58-59, section 5.3." = " WARN Manufacturer required by PPD 4.3 spec.\n REF: Pages 58-59, section 5.3.";
-
" WARN Non-Windows PPD files should use lines ending with only LF, not CR LF." = " WARN Non-Windows PPD files should use lines ending with only LF, not CR LF.";
-
" WARN Obsolete PPD version %.1f.\n REF: Page 42, section 5.2." = " WARN Obsolete PPD version %.1f.\n REF: Page 42, section 5.2.";
-
" WARN PCFileName longer than 8.3 in violation of PPD spec.\n REF: Pages 61-62, section 5.3." = " WARN PCFileName longer than 8.3 in violation of PPD spec.\n REF: Pages 61-62, section 5.3.";
-
" WARN PCFileName should contain a unique filename.\n REF: Pages 61-62, section 5.3." = " WARN PCFileName should contain a unique filename.\n REF: Pages 61-62, section 5.3.";
-
" WARN Protocols contains PJL but JCL attributes are not set.\n REF: Pages 78-79, section 5.7." = " WARN Protocols contains PJL but JCL attributes are not set.\n REF: Pages 78-79, section 5.7.";
-
" WARN Protocols contains both PJL and BCP; expected TBCP.\n REF: Pages 78-79, section 5.7." = " WARN Protocols contains both PJL and BCP; expected TBCP.\n REF: Pages 78-79, section 5.7.";
-
" WARN ShortNickName required by PPD 4.3 spec.\n REF: Pages 64-65, section 5.3." = " WARN ShortNickName required by PPD 4.3 spec.\n REF: Pages 64-65, section 5.3.";
-
" cupsaddsmb [options] -a" = " cupsaddsmb [options] -a";
-
" cupstestdsc [options] -" = " cupstestdsc [options] -";
-
" program | cupstestppd [options] -" = " program | cupstestppd [options] -";
-
" %s %s %s does not exist." = " %s %s %s does not exist.";
-
" %s %s file \"%s\" has the wrong capitalization." = " %s %s file \"%s\" has the wrong capitalization.";
-
" %s Bad %s choice %s.\n REF: Page 122, section 5.17" = " %s Bad %s choice %s.\n REF: Page 122, section 5.17";
-
" %s Bad UTF-8 \"%s\" translation string for option %s, choice %s." = " %s Bad UTF-8 \"%s\" translation string for option %s, choice %s.";
-
" %s Bad UTF-8 \"%s\" translation string for option %s." = " %s Bad UTF-8 \"%s\" translation string for option %s.";
-
" %s Bad cupsFilter value \"%s\"." = " %s Bad cupsFilter value \"%s\".";
-
" %s Bad cupsICCProfile %s." = " %s Bad cupsICCProfile %s.";
-
" %s Bad cupsPreFilter value \"%s\"." = " %s Bad cupsPreFilter value \"%s\".";
-
" %s Bad cupsUIConstraints %s: \"%s\"" = " %s Bad cupsUIConstraints %s: \"%s\"";
-
" %s Bad language \"%s\"." = " %s Bad language \"%s\".";
-
-" %s Bad permissions on APDialogExtension file \"%s\"." = " %s Bad permissions on APDialogExtension file \"%s\".";
-
-" %s Bad permissions on APPrinterIconPath file \"%s\"." = " %s Bad permissions on APPrinterIconPath file \"%s\".";
-
-" %s Bad permissions on APPrinterLowInkTool file \"%s\"." = " %s Bad permissions on APPrinterLowInkTool file \"%s\".";
-
-" %s Bad permissions on APPrinterUtilityPath file \"%s\"." = " %s Bad permissions on APPrinterUtilityPath file \"%s\".";
-
-" %s Bad permissions on APScanAppPath file \"%s\"." = " %s Bad permissions on APScanAppPath file \"%s\".";
-
-" %s Bad permissions on cupsFilter file \"%s\"." = " %s Bad permissions on cupsFilter file \"%s\".";
-
-" %s Bad permissions on cupsICCProfile file \"%s\"." = " %s Bad permissions on cupsICCProfile file \"%s\".";
-
-" %s Bad permissions on cupsPreFilter file \"%s\"." = " %s Bad permissions on cupsPreFilter file \"%s\".";
-
+" %s Bad permissions on %s file \"%s\"." = " %s Bad permissions on %s file \"%s\".";
" %s Bad spelling of %s - should be %s." = " %s Bad spelling of %s - should be %s.";
-
" %s Cannot provide both APScanAppPath and APScanAppBundleID." = " %s Cannot provide both APScanAppPath and APScanAppBundleID.";
-
" %s Empty cupsUIConstraints %s" = " %s Empty cupsUIConstraints %s";
-
" %s Missing \"%s\" translation string for option %s, choice %s." = " %s Missing \"%s\" translation string for option %s, choice %s.";
-
" %s Missing \"%s\" translation string for option %s." = " %s Missing \"%s\" translation string for option %s.";
-
-" %s Missing APDialogExtension file \"%s\"." = " %s Missing APDialogExtension file \"%s\".";
-
-" %s Missing APPrinterIconPath file \"%s\"." = " %s Missing APPrinterIconPath file \"%s\".";
-
-" %s Missing APPrinterLowInkTool file \"%s\"." = " %s Missing APPrinterLowInkTool file \"%s\".";
-
-" %s Missing APPrinterUtilityPath file \"%s\"." = " %s Missing APPrinterUtilityPath file \"%s\".";
-
-" %s Missing APScanAppPath file \"%s\"." = " %s Missing APScanAppPath file \"%s\".";
-
+" %s Missing %s file \"%s\"." = " %s Missing %s file \"%s\".";
" %s Missing REQUIRED PageRegion option.\n REF: Page 100, section 5.14." = " %s Missing REQUIRED PageRegion option.\n REF: Page 100, section 5.14.";
-
" %s Missing REQUIRED PageSize option.\n REF: Page 99, section 5.14." = " %s Missing REQUIRED PageSize option.\n REF: Page 99, section 5.14.";
-
" %s Missing choice *%s %s in UIConstraints \"*%s %s *%s %s\"." = " %s Missing choice *%s %s in UIConstraints \"*%s %s *%s %s\".";
-
" %s Missing choice *%s %s in cupsUIConstraints %s: \"%s\"" = " %s Missing choice *%s %s in cupsUIConstraints %s: \"%s\"";
-
-" %s Missing cupsFilter file \"%s\"." = " %s Missing cupsFilter file \"%s\".";
-
-" %s Missing cupsICCProfile file \"%s\"." = " %s Missing cupsICCProfile file \"%s\".";
-
-" %s Missing cupsPreFilter file \"%s\"." = " %s Missing cupsPreFilter file \"%s\".";
-
" %s Missing cupsUIResolver %s" = " %s Missing cupsUIResolver %s";
-
" %s Missing option %s in UIConstraints \"*%s %s *%s %s\"." = " %s Missing option %s in UIConstraints \"*%s %s *%s %s\".";
-
" %s Missing option %s in cupsUIConstraints %s: \"%s\"" = " %s Missing option %s in cupsUIConstraints %s: \"%s\"";
-
" %s No base translation \"%s\" is included in file." = " %s No base translation \"%s\" is included in file.";
-
" %s REQUIRED %s does not define choice None.\n REF: Page 122, section 5.17" = " %s REQUIRED %s does not define choice None.\n REF: Page 122, section 5.17";
-
" %s Size \"%s\" defined for %s but not for %s." = " %s Size \"%s\" defined for %s but not for %s.";
-
" %s Size \"%s\" has unexpected dimensions (%gx%g)." = " %s Size \"%s\" has unexpected dimensions (%gx%g).";
-
" %s cupsICCProfile %s hash value collides with %s." = " %s cupsICCProfile %s hash value collides with %s.";
-
" %s cupsUIResolver %s causes a loop." = " %s cupsUIResolver %s causes a loop.";
-
" %s cupsUIResolver %s does not list at least two different options." = " %s cupsUIResolver %s does not list at least two different options.";
-
" **FAIL** %s choice names %s and %s differ only by case." = " **FAIL** %s choice names %s and %s differ only by case.";
-
" **FAIL** %s must be 1284DeviceID\n REF: Page 72, section 5.5" = " **FAIL** %s must be 1284DeviceID\n REF: Page 72, section 5.5";
-
" **FAIL** BAD Default%s %s\n REF: Page 40, section 4.5." = " **FAIL** BAD Default%s %s\n REF: Page 40, section 4.5.";
-
" **FAIL** BAD DefaultImageableArea %s\n REF: Page 102, section 5.15." = " **FAIL** BAD DefaultImageableArea %s\n REF: Page 102, section 5.15.";
-
" **FAIL** BAD DefaultPaperDimension %s\n REF: Page 103, section 5.15." = " **FAIL** BAD DefaultPaperDimension %s\n REF: Page 103, section 5.15.";
-
" **FAIL** BAD JobPatchFile attribute in file\n REF: Page 24, section 3.4." = " **FAIL** BAD JobPatchFile attribute in file\n REF: Page 24, section 3.4.";
-
" **FAIL** BAD Manufacturer (should be \"HP\")\n REF: Page 211, table D.1." = " **FAIL** BAD Manufacturer (should be \"HP\")\n REF: Page 211, table D.1.";
-
" **FAIL** BAD Manufacturer (should be \"Oki\")\n REF: Page 211, table D.1." = " **FAIL** BAD Manufacturer (should be \"Oki\")\n REF: Page 211, table D.1.";
-
" **FAIL** BAD ModelName - \"%c\" not allowed in string.\n REF: Pages 59-60, section 5.3." = " **FAIL** BAD ModelName - \"%c\" not allowed in string.\n REF: Pages 59-60, section 5.3.";
-
" **FAIL** BAD PSVersion - not \"(string) int\".\n REF: Pages 62-64, section 5.3." = " **FAIL** BAD PSVersion - not \"(string) int\".\n REF: Pages 62-64, section 5.3.";
-
" **FAIL** BAD Product - not \"(string)\".\n REF: Page 62, section 5.3." = " **FAIL** BAD Product - not \"(string)\".\n REF: Page 62, section 5.3.";
-
" **FAIL** BAD ShortNickName - longer than 31 chars.\n REF: Pages 64-65, section 5.3." = " **FAIL** BAD ShortNickName - longer than 31 chars.\n REF: Pages 64-65, section 5.3.";
-
" **FAIL** Bad %s choice %s\n REF: Page 84, section 5.9" = " **FAIL** Bad %s choice %s\n REF: Page 84, section 5.9";
-
" **FAIL** Bad FileVersion \"%s\"\n REF: Page 56, section 5.3." = " **FAIL** Bad FileVersion \"%s\"\n REF: Page 56, section 5.3.";
-
" **FAIL** Bad FormatVersion \"%s\"\n REF: Page 56, section 5.3." = " **FAIL** Bad FormatVersion \"%s\"\n REF: Page 56, section 5.3.";
-
" **FAIL** Bad LanguageEncoding %s - must be ISOLatin1." = " **FAIL** Bad LanguageEncoding %s - must be ISOLatin1.";
-
" **FAIL** Bad LanguageVersion %s - must be English." = " **FAIL** Bad LanguageVersion %s - must be English.";
-
" **FAIL** Default option code cannot be interpreted: %s" = " **FAIL** Default option code cannot be interpreted: %s";
-
" **FAIL** Default translation string for option %s choice %s contains 8-bit characters." = " **FAIL** Default translation string for option %s choice %s contains 8-bit characters.";
-
" **FAIL** Default translation string for option %s contains 8-bit characters." = " **FAIL** Default translation string for option %s contains 8-bit characters.";
-
" **FAIL** Group names %s and %s differ only by case." = " **FAIL** Group names %s and %s differ only by case.";
-
" **FAIL** Multiple occurrences of %s choice name %s." = " **FAIL** Multiple occurrences of %s choice name %s.";
-
" **FAIL** Option names %s and %s differ only by case." = " **FAIL** Option names %s and %s differ only by case.";
-
" **FAIL** REQUIRED Default%s\n REF: Page 40, section 4.5." = " **FAIL** REQUIRED Default%s\n REF: Page 40, section 4.5.";
-
" **FAIL** REQUIRED DefaultImageableArea\n REF: Page 102, section 5.15." = " **FAIL** REQUIRED DefaultImageableArea\n REF: Page 102, section 5.15.";
-
" **FAIL** REQUIRED DefaultPaperDimension\n REF: Page 103, section 5.15." = " **FAIL** REQUIRED DefaultPaperDimension\n REF: Page 103, section 5.15.";
-
" **FAIL** REQUIRED FileVersion\n REF: Page 56, section 5.3." = " **FAIL** REQUIRED FileVersion\n REF: Page 56, section 5.3.";
-
" **FAIL** REQUIRED FormatVersion\n REF: Page 56, section 5.3." = " **FAIL** REQUIRED FormatVersion\n REF: Page 56, section 5.3.";
-
" **FAIL** REQUIRED ImageableArea for PageSize %s\n REF: Page 41, section 5.\n REF: Page 102, section 5.15." = " **FAIL** REQUIRED ImageableArea for PageSize %s\n REF: Page 41, section 5.\n REF: Page 102, section 5.15.";
-
" **FAIL** REQUIRED LanguageEncoding\n REF: Pages 56-57, section 5.3." = " **FAIL** REQUIRED LanguageEncoding\n REF: Pages 56-57, section 5.3.";
-
" **FAIL** REQUIRED LanguageVersion\n REF: Pages 57-58, section 5.3." = " **FAIL** REQUIRED LanguageVersion\n REF: Pages 57-58, section 5.3.";
-
" **FAIL** REQUIRED Manufacturer\n REF: Pages 58-59, section 5.3." = " **FAIL** REQUIRED Manufacturer\n REF: Pages 58-59, section 5.3.";
-
" **FAIL** REQUIRED ModelName\n REF: Pages 59-60, section 5.3." = " **FAIL** REQUIRED ModelName\n REF: Pages 59-60, section 5.3.";
-
" **FAIL** REQUIRED NickName\n REF: Page 60, section 5.3." = " **FAIL** REQUIRED NickName\n REF: Page 60, section 5.3.";
-
" **FAIL** REQUIRED PCFileName\n REF: Pages 61-62, section 5.3." = " **FAIL** REQUIRED PCFileName\n REF: Pages 61-62, section 5.3.";
-
" **FAIL** REQUIRED PSVersion\n REF: Pages 62-64, section 5.3." = " **FAIL** REQUIRED PSVersion\n REF: Pages 62-64, section 5.3.";
-
" **FAIL** REQUIRED PageRegion\n REF: Page 100, section 5.14." = " **FAIL** REQUIRED PageRegion\n REF: Page 100, section 5.14.";
-
" **FAIL** REQUIRED PageSize\n REF: Page 41, section 5.\n REF: Page 99, section 5.14." = " **FAIL** REQUIRED PageSize\n REF: Page 41, section 5.\n REF: Page 99, section 5.14.";
-
" **FAIL** REQUIRED PageSize\n REF: Pages 99-100, section 5.14." = " **FAIL** REQUIRED PageSize\n REF: Pages 99-100, section 5.14.";
-
" **FAIL** REQUIRED PaperDimension for PageSize %s\n REF: Page 41, section 5.\n REF: Page 103, section 5.15." = " **FAIL** REQUIRED PaperDimension for PageSize %s\n REF: Page 41, section 5.\n REF: Page 103, section 5.15.";
-
" **FAIL** REQUIRED Product\n REF: Page 62, section 5.3." = " **FAIL** REQUIRED Product\n REF: Page 62, section 5.3.";
-
" **FAIL** REQUIRED ShortNickName\n REF: Page 64-65, section 5.3." = " **FAIL** REQUIRED ShortNickName\n REF: Page 64-65, section 5.3.";
-
+" **FAIL** Unable to open PPD file - %s" = " **FAIL** Unable to open PPD file - %s";
+" **FAIL** Unable to open PPD file - %s on line %d." = " **FAIL** Unable to open PPD file - %s on line %d.";
" %d ERRORS FOUND" = " %d ERRORS FOUND";
-
-" --[no-]debug-logging Turn debug logging on/off." = " --[no-]debug-logging Turn debug logging on/off.";
-
-" --[no-]remote-admin Turn remote administration on/off." = " --[no-]remote-admin Turn remote administration on/off.";
-
-" --[no-]remote-any Allow/prevent access from the Internet." = " --[no-]remote-any Allow/prevent access from the Internet.";
-
-" --[no-]remote-printers Show/hide remote printers." = " --[no-]remote-printers Show/hide remote printers.";
-
-" --[no-]share-printers Turn printer sharing on/off." = " --[no-]share-printers Turn printer sharing on/off.";
-
-" --[no-]user-cancel-any Allow/prevent users to cancel any job." = " --[no-]user-cancel-any Allow/prevent users to cancel any job.";
-
-" -E Enable encryption." = " -E Enable encryption.";
-
-" -I {filename,filters,none,profiles}" = " -I {filename,filters,none,profiles}";
-
-" -R root-directory Set alternate root." = " -R root-directory Set alternate root.";
-
-" -U username Specify username." = " -U username Specify username.";
-
-" -W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}" = " -W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}";
-
" -h Show program usage" = " -h Show program usage";
-
-" -h server[:port] Specify server address." = " -h server[:port] Specify server address.";
-
-" -q Run silently." = " -q Run silently.";
-
-" -r Use 'relaxed' open mode." = " -r Use 'relaxed' open mode.";
-
-" -v Be slightly verbose." = " -v Be slightly verbose.";
-
-" -vv Be very verbose." = " -vv Be very verbose.";
-
" Bad %%%%BoundingBox: on line %d.\n REF: Page 39, %%%%BoundingBox:" = " Bad %%%%BoundingBox: on line %d.\n REF: Page 39, %%%%BoundingBox:";
-
" Bad %%%%Page: on line %d.\n REF: Page 53, %%%%Page:" = " Bad %%%%Page: on line %d.\n REF: Page 53, %%%%Page:";
-
" Bad %%%%Pages: on line %d.\n REF: Page 43, %%%%Pages:" = " Bad %%%%Pages: on line %d.\n REF: Page 43, %%%%Pages:";
-
" Line %d is longer than 255 characters (%d).\n REF: Page 25, Line Length" = " Line %d is longer than 255 characters (%d).\n REF: Page 25, Line Length";
-
" Missing %!PS-Adobe-3.0 on first line.\n REF: Page 17, 3.1 Conforming Documents" = " Missing %!PS-Adobe-3.0 on first line.\n REF: Page 17, 3.1 Conforming Documents";
-
" Missing %%EndComments comment. REF: Page 41, %%EndComments" = " Missing %%EndComments comment. REF: Page 41, %%EndComments";
-
" Missing or bad %%BoundingBox: comment.\n REF: Page 39, %%BoundingBox:" = " Missing or bad %%BoundingBox: comment.\n REF: Page 39, %%BoundingBox:";
-
" Missing or bad %%Page: comments.\n REF: Page 53, %%Page:" = " Missing or bad %%Page: comments.\n REF: Page 53, %%Page:";
-
" Missing or bad %%Pages: comment.\n REF: Page 43, %%Pages:" = " Missing or bad %%Pages: comment.\n REF: Page 43, %%Pages:";
-
" NO ERRORS FOUND" = " NO ERRORS FOUND";
-
" Saw %d lines that exceeded 255 characters." = " Saw %d lines that exceeded 255 characters.";
-
" Too many %%BeginDocument comments." = " Too many %%BeginDocument comments.";
-
" Too many %%EndDocument comments." = " Too many %%EndDocument comments.";
-
" Warning: file contains binary data." = " Warning: file contains binary data.";
-
" Warning: no %%EndComments comment in file." = " Warning: no %%EndComments comment in file.";
-
" Warning: obsolete DSC version %.1f in file." = " Warning: obsolete DSC version %.1f in file.";
-
-" --cr End lines with CR (Mac OS 9)." = " --cr End lines with CR (Mac OS 9).";
-
-" --crlf End lines with CR + LF (Windows)." = " --crlf End lines with CR + LF (Windows).";
-
-" --lf End lines with LF (UNIX/Linux/Mac OS X)." = " --lf End lines with LF (UNIX/Linux/Mac OS X).";
-
-" -4 Connect using IPv4." = " -4 Connect using IPv4.";
-
-" -6 Connect using IPv6." = " -6 Connect using IPv6.";
-
-" -C Send requests using chunking (default)." = " -C Send requests using chunking (default).";
-
-" -D Remove the input file when finished." = " -D Remove the input file when finished.";
-
-" -D name=value Set named variable to value." = " -D name=value Set named variable to value.";
-
-" -D name=value Set named variable to value." = " -D name=value Set named variable to value.";
-
-" -E Encrypt the connection to the server." = " -E Encrypt the connection to the server.";
-
-" -E Test with TLS encryption." = " -E Test with TLS encryption.";
-
-" -H samba-server Use the named SAMBA server." = " -H samba-server Use the named SAMBA server.";
-
-" -I Ignore errors." = " -I Ignore errors.";
-
-" -I include-dir" = " -I include-dir";
-
-" -I include-dir Add include directory to search path." = " -I include-dir Add include directory to search path.";
-
-" -I include-dir Add include directory to search path." = " -I include-dir Add include directory to search path.";
-
-" -J title Set title." = " -J title Set title.";
-
-" -L Send requests using content-length." = " -L Send requests using content-length.";
-
-" -P filename.ppd Set PPD file." = " -P filename.ppd Set PPD file.";
-
-" -S Test with SSL encryption." = " -S Test with SSL encryption.";
-
-" -T Set the receive/send timeout in seconds." = " -T Set the receive/send timeout in seconds.";
-
-" -U samba-user Authenticate using the named SAMBA user." = " -U samba-user Authenticate using the named SAMBA user.";
-
-" -U username Set username for job." = " -U username Set username for job.";
-
-" -V version Set default IPP version." = " -V version Set default IPP version.";
-
-" -X Produce XML plist instead of plain text." = " -X Produce XML plist instead of plain text.";
-
-" -a Export all printers." = " -a Export all printers.";
-
-" -a 'name=value ...' Set option(s)." = " -a 'name=value ...' Set option(s).";
-
-" -c catalog.po Load the specified message catalog." = " -c catalog.po Load the specified message catalog.";
-
-" -c copies Set number of copies." = " -c copies Set number of copies.";
-
-" -c cupsd.conf Set cupsd.conf file to use." = " -c cupsd.conf Set cupsd.conf file to use.";
-
-" -d name=value Define variable." = " -d name=value Define variable.";
-
-" -d output-dir Specify the output directory." = " -d output-dir Specify the output directory.";
-
-" -d printer Use the named printer." = " -d printer Use the named printer.";
-
-" -d printer Use the named printer." = " -d printer Use the named printer.";
-
-" -e Use every filter from the PPD file." = " -e Use every filter from the PPD file.";
-
-" -e Use every filter from the PPD file." = " -e Use every filter from the PPD file.";
-
-" -f filename Set file to be converted (otherwise stdin)." = " -f filename Set file to be converted (otherwise stdin).";
-
-" -f filename Set default request filename." = " -f filename Set default request filename.";
-
-" -h cups-server Use the named CUPS server." = " -h cups-server Use the named CUPS server.";
-
-" -i mime/type Set input MIME type (otherwise auto-typed)." = " -i mime/type Set input MIME type (otherwise auto-typed).";
-
-" -i seconds Repeat the last file with the given time interval." = " -i seconds Repeat the last file with the given time interval.";
-
-" -j job-id[,N] Filter file N from the specified job (default is file 1)." = " -j job-id[,N] Filter file N from the specified job (default is file 1).";
-
-" -j mime/type Set output MIME type (otherwise application/pdf)." = " -j mime/type Set output MIME type (otherwise application/pdf).";
-
-" -l lang[,lang,...] Specify the output language(s) (locale)." = " -l lang[,lang,...] Specify the output language(s) (locale).";
-
-" -m Use the ModelName value as the filename." = " -m Use the ModelName value as the filename.";
-
-" -n copies Set number of copies." = " -n copies Set number of copies.";
-
-" -n count Repeat the last file the given number of times." = " -n count Repeat the last file the given number of times.";
-
-" -o filename Set file to be generated (otherwise stdout)." = " -o filename Set file to be generated (otherwise stdout).";
-
-" -o filename.drv" = " -o filename.drv";
-
-" -o filename.ppd[.gz]" = " -o filename.ppd[.gz]";
-
-" -o name=value Set option(s)." = " -o name=value Set option(s).";
-
-" -p filename.ppd Set PPD file." = " -p filename.ppd Set PPD file.";
-
-" -q Be quiet - no output except errors." = " -q Be quiet - no output except errors.";
-
-" -t Test PPDs instead of generating them." = " -t Test PPDs instead of generating them.";
-
-" -t Produce a test report." = " -t Produce a test report.";
-
-" -t title Set title." = " -t title Set title.";
-
-" -u Remove the PPD file when finished." = " -u Remove the PPD file when finished.";
-
-" -v Be verbose (more v's for more verbosity)." = " -v Be verbose (more v's for more verbosity).";
-
-" -v Be verbose (more v's for more verbosity)." = " -v Be verbose (more v's for more verbosity).";
-
-" -v Be verbose (show commands)." = " -v Be verbose (show commands).";
-
-" -v Show all attributes sent and received." = " -v Show all attributes sent and received.";
-
-" -z Compress PPD files using GNU zip." = " -z Compress PPD files using GNU zip.";
-
+" --[no-]debug-logging Turn debug logging on/off." = " --[no-]debug-logging Turn debug logging on/off.";
+" --[no-]remote-admin Turn remote administration on/off." = " --[no-]remote-admin Turn remote administration on/off.";
+" --[no-]remote-any Allow/prevent access from the Internet." = " --[no-]remote-any Allow/prevent access from the Internet.";
+" --[no-]remote-printers Show/hide remote printers." = " --[no-]remote-printers Show/hide remote printers.";
+" --[no-]share-printers Turn printer sharing on/off." = " --[no-]share-printers Turn printer sharing on/off.";
+" --[no-]user-cancel-any Allow/prevent users to cancel any job." = " --[no-]user-cancel-any Allow/prevent users to cancel any job.";
+" --cr End lines with CR (Mac OS 9)." = " --cr End lines with CR (Mac OS 9).";
+" --crlf End lines with CR + LF (Windows)." = " --crlf End lines with CR + LF (Windows).";
+" --lf End lines with LF (UNIX/Linux/Mac OS X)." = " --lf End lines with LF (UNIX/Linux/Mac OS X).";
+" -4 Connect using IPv4." = " -4 Connect using IPv4.";
+" -6 Connect using IPv6." = " -6 Connect using IPv6.";
+" -C Send requests using chunking (default)." = " -C Send requests using chunking (default).";
+" -D Remove the input file when finished." = " -D Remove the input file when finished.";
+" -D name=value Set named variable to value." = " -D name=value Set named variable to value.";
+" -E Enable encryption." = " -E Enable encryption.";
+" -E Encrypt the connection to the server." = " -E Encrypt the connection to the server.";
+" -E Test with TLS encryption." = " -E Test with TLS encryption.";
+" -F Run in the foreground but detach from console." = " -F Run in the foreground but detach from console.";
+" -H samba-server Use the named SAMBA server." = " -H samba-server Use the named SAMBA server.";
+" -I Ignore errors." = " -I Ignore errors.";
+" -I include-dir Add include directory to search path." = " -I include-dir Add include directory to search path.";
+" -I {filename,filters,none,profiles}" = " -I {filename,filters,none,profiles}";
+" -J title Set title." = " -J title Set title.";
+" -L Send requests using content-length." = " -L Send requests using content-length.";
+" -P filename.ppd Set PPD file." = " -P filename.ppd Set PPD file.";
+" -R root-directory Set alternate root." = " -R root-directory Set alternate root.";
+" -S Test with SSL encryption." = " -S Test with SSL encryption.";
+" -T Set the receive/send timeout in seconds." = " -T Set the receive/send timeout in seconds.";
+" -U samba-user Authenticate using the named SAMBA user." = " -U samba-user Authenticate using the named SAMBA user.";
+" -U username Set username for job." = " -U username Set username for job.";
+" -U username Specify username." = " -U username Specify username.";
+" -V version Set default IPP version." = " -V version Set default IPP version.";
+" -W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}" = " -W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}";
+" -X Produce XML plist instead of plain text." = " -X Produce XML plist instead of plain text.";
+" -a Export all printers." = " -a Export all printers.";
+" -a 'name=value ...' Set option(s)." = " -a 'name=value ...' Set option(s).";
+" -c catalog.po Load the specified message catalog." = " -c catalog.po Load the specified message catalog.";
+" -c config-file Load alternate configuration file." = " -c config-file Load alternate configuration file.";
+" -c copies Set number of copies." = " -c copies Set number of copies.";
+" -c cupsd.conf Set cupsd.conf file to use." = " -c cupsd.conf Set cupsd.conf file to use.";
+" -d name=value Set named variable to value." = " -d name=value Set named variable to value.";
+" -d output-dir Specify the output directory." = " -d output-dir Specify the output directory.";
+" -d printer Use the named printer." = " -d printer Use the named printer.";
+" -e Use every filter from the PPD file." = " -e Use every filter from the PPD file.";
+" -f Run in the foreground." = " -f Run in the foreground.";
+" -f filename Set default request filename." = " -f filename Set default request filename.";
+" -f filename Set file to be converted (otherwise stdin)." = " -f filename Set file to be converted (otherwise stdin).";
+" -h Show this usage message." = " -h Show this usage message.";
+" -h cups-server Use the named CUPS server." = " -h cups-server Use the named CUPS server.";
+" -h server[:port] Specify server address." = " -h server[:port] Specify server address.";
+" -i mime/type Set input MIME type (otherwise auto-typed)." = " -i mime/type Set input MIME type (otherwise auto-typed).";
+" -i seconds Repeat the last file with the given time interval." = " -i seconds Repeat the last file with the given time interval.";
+" -j job-id[,N] Filter file N from the specified job (default is file 1)." = " -j job-id[,N] Filter file N from the specified job (default is file 1).";
+" -j mime/type Set output MIME type (otherwise application/pdf)." = " -j mime/type Set output MIME type (otherwise application/pdf).";
+" -l Run cupsd from launchd(8)." = " -l Run cupsd from launchd(8).";
+" -l lang[,lang,...] Specify the output language(s) (locale)." = " -l lang[,lang,...] Specify the output language(s) (locale).";
+" -m Use the ModelName value as the filename." = " -m Use the ModelName value as the filename.";
+" -m mime/type Set output MIME type (otherwise application/pdf)." = " -m mime/type Set output MIME type (otherwise application/pdf).";
+" -n copies Set number of copies." = " -n copies Set number of copies.";
+" -n count Repeat the last file the given number of times." = " -n count Repeat the last file the given number of times.";
+" -o filename Set file to be generated (otherwise stdout)." = " -o filename Set file to be generated (otherwise stdout).";
+" -o filename.drv Set driver information file (otherwise ppdi.drv)." = " -o filename.drv Set driver information file (otherwise ppdi.drv).";
+" -o filename.ppd[.gz] Set output file (otherwise stdout)." = " -o filename.ppd[.gz] Set output file (otherwise stdout).";
+" -o name=value Set option(s)." = " -o name=value Set option(s).";
+" -p filename.ppd Set PPD file." = " -p filename.ppd Set PPD file.";
+" -q Be quiet - no output except errors." = " -q Be quiet - no output except errors.";
+" -q Run silently." = " -q Run silently.";
+" -r Use 'relaxed' open mode." = " -r Use 'relaxed' open mode.";
+" -t Produce a test report." = " -t Produce a test report.";
+" -t Test PPDs instead of generating them." = " -t Test PPDs instead of generating them.";
+" -t Test the configuration file." = " -t Test the configuration file.";
+" -t title Set title." = " -t title Set title.";
+" -u Remove the PPD file when finished." = " -u Remove the PPD file when finished.";
+" -v Be slightly verbose." = " -v Be slightly verbose.";
+" -v Be verbose (more v's for more verbosity)." = " -v Be verbose (more v's for more verbosity).";
+" -v Be verbose (show commands)." = " -v Be verbose (show commands).";
+" -v Show all attributes sent and received." = " -v Show all attributes sent and received.";
+" -vv Be very verbose." = " -vv Be very verbose.";
+" -z Compress PPD files using GNU zip." = " -z Compress PPD files using GNU zip.";
" FAIL" = " FAIL";
-
-" FAIL **FAIL** Unable to open PPD file - %s" = " FAIL **FAIL** Unable to open PPD file - %s";
-
-" FAIL **FAIL** Unable to open PPD file - %s on line %d." = " FAIL **FAIL** Unable to open PPD file - %s on line %d.";
-
" PASS" = " PASS";
-
-"#10 Envelope" = "#10 Envelope";
-
-"#11 Envelope" = "#11 Envelope";
-
-"#12 Envelope" = "#12 Envelope";
-
-"#14 Envelope" = "#14 Envelope";
-
-"#9 Envelope" = "#9 Envelope";
-
"%-6s %-10.10s %-4d %-10d %-27.27s %.0f bytes" = "%-6s %-10.10s %-4d %-10d %-27.27s %.0f bytes";
-
"%-7s %-7.7s %-7d %-31.31s %.0f bytes" = "%-7s %-7.7s %-7d %-31.31s %.0f bytes";
-
"%.0f x %.0f millimeters" = "%.0f x %.0f millimeters";
-
"%.0f x %.0f to %.0f x %.0f millimeters" = "%.0f x %.0f to %.0f x %.0f millimeters";
-
"%.2f x %.2f inches" = "%.2f x %.2f inches";
-
"%.2f x %.2f to %.2f x %.2f inches" = "%.2f x %.2f to %.2f x %.2f inches";
-
"%s accepting requests since %s" = "%s accepting requests since %s";
-
"%s cannot be changed." = "%s cannot be changed.";
-
"%s is not implemented by the CUPS version of lpc." = "%s is not implemented by the CUPS version of lpc.";
-
"%s is not ready" = "%s is not ready";
-
"%s is ready" = "%s is ready";
-
"%s is ready and printing" = "%s is ready and printing";
-
"%s job-id user title copies options [file]" = "%s job-id user title copies options [file]";
-
"%s not accepting requests since %s -" = "%s not accepting requests since %s -";
-
-"%s not supported" = "%s not supported";
-
+"%s not supported." = "%s not supported.";
"%s/%s accepting requests since %s" = "%s/%s accepting requests since %s";
-
"%s/%s not accepting requests since %s -" = "%s/%s not accepting requests since %s -";
-
"%s: %-33.33s [job %d localhost]" = "%s: %-33.33s [job %d localhost]";
-
+// TRANSLATORS: Message is "subject: error"
+"%s: %s" = "%s: %s";
"%s: %s failed: %s" = "%s: %s failed: %s";
-
"%s: Don't know what to do." = "%s: Don't know what to do.";
-
"%s: Error - %s environment variable names non-existent destination \"%s\"." = "%s: Error - %s environment variable names non-existent destination \"%s\".";
-
"%s: Error - bad job ID." = "%s: Error - bad job ID.";
-
"%s: Error - cannot print files and alter jobs simultaneously." = "%s: Error - cannot print files and alter jobs simultaneously.";
-
"%s: Error - cannot print from stdin if files or a job ID are provided." = "%s: Error - cannot print from stdin if files or a job ID are provided.";
-
"%s: Error - expected character set after \"-S\" option." = "%s: Error - expected character set after \"-S\" option.";
-
"%s: Error - expected content type after \"-T\" option." = "%s: Error - expected content type after \"-T\" option.";
-
+"%s: Error - expected copies after \"-#\" option." = "%s: Error - expected copies after \"-#\" option.";
"%s: Error - expected copies after \"-n\" option." = "%s: Error - expected copies after \"-n\" option.";
-
-"%s: Error - expected copy count after \"-#\" option." = "%s: Error - expected copy count after \"-#\" option.";
-
"%s: Error - expected destination after \"-P\" option." = "%s: Error - expected destination after \"-P\" option.";
-
"%s: Error - expected destination after \"-b\" option." = "%s: Error - expected destination after \"-b\" option.";
-
"%s: Error - expected destination after \"-d\" option." = "%s: Error - expected destination after \"-d\" option.";
-
"%s: Error - expected form after \"-f\" option." = "%s: Error - expected form after \"-f\" option.";
-
"%s: Error - expected hold name after \"-H\" option." = "%s: Error - expected hold name after \"-H\" option.";
-
"%s: Error - expected hostname after \"-H\" option." = "%s: Error - expected hostname after \"-H\" option.";
-
"%s: Error - expected hostname after \"-h\" option." = "%s: Error - expected hostname after \"-h\" option.";
-
"%s: Error - expected mode list after \"-y\" option." = "%s: Error - expected mode list after \"-y\" option.";
-
"%s: Error - expected name after \"-%c\" option." = "%s: Error - expected name after \"-%c\" option.";
-
-"%s: Error - expected option string after \"-o\" option." = "%s: Error - expected option string after \"-o\" option.";
-
+"%s: Error - expected option=value after \"-o\" option." = "%s: Error - expected option=value after \"-o\" option.";
"%s: Error - expected page list after \"-P\" option." = "%s: Error - expected page list after \"-P\" option.";
-
"%s: Error - expected priority after \"-%c\" option." = "%s: Error - expected priority after \"-%c\" option.";
-
"%s: Error - expected reason text after \"-r\" option." = "%s: Error - expected reason text after \"-r\" option.";
-
"%s: Error - expected title after \"-t\" option." = "%s: Error - expected title after \"-t\" option.";
-
"%s: Error - expected username after \"-U\" option." = "%s: Error - expected username after \"-U\" option.";
-
"%s: Error - expected username after \"-u\" option." = "%s: Error - expected username after \"-u\" option.";
-
"%s: Error - expected value after \"-%c\" option." = "%s: Error - expected value after \"-%c\" option.";
-
"%s: Error - need \"completed\", \"not-completed\", or \"all\" after \"-W\" option." = "%s: Error - need \"completed\", \"not-completed\", or \"all\" after \"-W\" option.";
-
"%s: Error - no default destination available." = "%s: Error - no default destination available.";
-
"%s: Error - priority must be between 1 and 100." = "%s: Error - priority must be between 1 and 100.";
-
"%s: Error - scheduler not responding." = "%s: Error - scheduler not responding.";
-
"%s: Error - too many files - \"%s\"." = "%s: Error - too many files - \"%s\".";
-
"%s: Error - unable to access \"%s\" - %s" = "%s: Error - unable to access \"%s\" - %s";
-
-"%s: Error - unable to access \"%s\" - %s." = "%s: Error - unable to access \"%s\" - %s.";
-
"%s: Error - unable to queue from stdin - %s." = "%s: Error - unable to queue from stdin - %s.";
-
"%s: Error - unknown destination \"%s\"." = "%s: Error - unknown destination \"%s\".";
-
"%s: Error - unknown destination \"%s/%s\"." = "%s: Error - unknown destination \"%s/%s\".";
-
"%s: Error - unknown option \"%c\"." = "%s: Error - unknown option \"%c\".";
-
"%s: Error - unknown option \"%s\"." = "%s: Error - unknown option \"%s\".";
-
"%s: Expected job ID after \"-i\" option." = "%s: Expected job ID after \"-i\" option.";
-
"%s: Filter \"%s\" not available: %s" = "%s: Filter \"%s\" not available: %s";
-
"%s: Invalid destination name in list \"%s\"." = "%s: Invalid destination name in list \"%s\".";
-
"%s: Invalid filter string \"%s\"." = "%s: Invalid filter string \"%s\".";
-
"%s: Need job ID (\"-i jobid\") before \"-H restart\"." = "%s: Need job ID (\"-i jobid\") before \"-H restart\".";
-
"%s: No filter to convert from %s/%s to %s/%s." = "%s: No filter to convert from %s/%s to %s/%s.";
-
"%s: Operation failed: %s" = "%s: Operation failed: %s";
-
"%s: Sorry, no encryption support." = "%s: Sorry, no encryption support.";
-
"%s: Unable to connect to server." = "%s: Unable to connect to server.";
-
"%s: Unable to contact server." = "%s: Unable to contact server.";
-
"%s: Unable to determine MIME type of \"%s\"." = "%s: Unable to determine MIME type of \"%s\".";
-
"%s: Unable to open %s: %s" = "%s: Unable to open %s: %s";
-
"%s: Unable to open PPD file: %s on line %d." = "%s: Unable to open PPD file: %s on line %d.";
-
"%s: Unable to read MIME database from \"%s\" or \"%s\"." = "%s: Unable to read MIME database from \"%s\" or \"%s\".";
-
"%s: Unknown destination \"%s\"." = "%s: Unknown destination \"%s\".";
-
"%s: Unknown destination MIME type %s/%s." = "%s: Unknown destination MIME type %s/%s.";
-
"%s: Unknown option \"%c\"." = "%s: Unknown option \"%c\".";
-
"%s: Unknown source MIME type %s/%s." = "%s: Unknown source MIME type %s/%s.";
-
"%s: Warning - \"%c\" format modifier not supported - output may not be correct." = "%s: Warning - \"%c\" format modifier not supported - output may not be correct.";
-
"%s: Warning - character set option ignored." = "%s: Warning - character set option ignored.";
-
"%s: Warning - content type option ignored." = "%s: Warning - content type option ignored.";
-
"%s: Warning - form option ignored." = "%s: Warning - form option ignored.";
-
"%s: Warning - mode option ignored." = "%s: Warning - mode option ignored.";
-
-"%s: error - %s environment variable names non-existent destination \"%s\"." = "%s: error - %s environment variable names non-existent destination \"%s\".";
-
-"%s: error - expected option=value after \"-o\" option." = "%s: error - expected option=value after \"-o\" option.";
-
-"%s: error - no default destination available." = "%s: error - no default destination available.";
-
"-1" = "-1";
-
"-10" = "-10";
-
"-100" = "-100";
-
"-105" = "-105";
-
"-11" = "-11";
-
"-110" = "-110";
-
"-115" = "-115";
-
"-12" = "-12";
-
"-120" = "-120";
-
"-13" = "-13";
-
"-14" = "-14";
-
"-15" = "-15";
-
"-2" = "-2";
-
"-20" = "-20";
-
"-25" = "-25";
-
"-3" = "-3";
-
"-30" = "-30";
-
"-35" = "-35";
-
"-4" = "-4";
-
"-40" = "-40";
-
"-45" = "-45";
-
"-5" = "-5";
-
"-50" = "-50";
-
"-55" = "-55";
-
"-6" = "-6";
-
"-60" = "-60";
-
"-65" = "-65";
-
"-7" = "-7";
-
"-70" = "-70";
-
"-75" = "-75";
-
"-8" = "-8";
-
"-80" = "-80";
-
"-85" = "-85";
-
"-9" = "-9";
-
"-90" = "-90";
-
"-95" = "-95";
-
-"-F Run in the foreground but detach from console." = "-F Run in the foreground but detach from console.";
-
-"-c config-file Load alternate configuration file." = "-c config-file Load alternate configuration file.";
-
-"-f Run in the foreground." = "-f Run in the foreground.";
-
-"-h Show this usage message." = "-h Show this usage message.";
-
-"-l Run cupsd from launchd(8)." = "-l Run cupsd from launchd(8).";
-
-"-t Test the configuration file." = "-t Test the configuration file.";
-
"0" = "0";
-
"1" = "1";
-
"1 inch/sec." = "1 inch/sec.";
-
"1.25x0.25\"" = "1.25x0.25\"";
-
"1.25x2.25\"" = "1.25x2.25\"";
-
"1.5 inch/sec." = "1.5 inch/sec.";
-
"1.50x0.25\"" = "1.50x0.25\"";
-
"1.50x0.50\"" = "1.50x0.50\"";
-
"1.50x1.00\"" = "1.50x1.00\"";
-
"1.50x2.00\"" = "1.50x2.00\"";
-
"10" = "10";
-
"10 inches/sec." = "10 inches/sec.";
-
"10 x 11\"" = "10 x 11\"";
-
"10 x 13\"" = "10 x 13\"";
-
"10 x 14\"" = "10 x 14\"";
-
"100" = "100";
-
"100 mm/sec." = "100 mm/sec.";
-
"105" = "105";
-
"11" = "11";
-
"11 inches/sec." = "11 inches/sec.";
-
"110" = "110";
-
"115" = "115";
-
"12" = "12";
-
"12 inches/sec." = "12 inches/sec.";
-
"12 x 11\"" = "12 x 11\"";
-
"120" = "120";
-
"120 mm/sec." = "120 mm/sec.";
-
"120x60dpi" = "120x60dpi";
-
"120x72dpi" = "120x72dpi";
-
"13" = "13";
-
"136dpi" = "136dpi";
-
"14" = "14";
-
"15" = "15";
-
"15 mm/sec." = "15 mm/sec.";
-
"15 x 11\"" = "15 x 11\"";
-
"150 mm/sec." = "150 mm/sec.";
-
"150dpi" = "150dpi";
-
"16" = "16";
-
"17" = "17";
-
"18" = "18";
-
"180dpi" = "180dpi";
-
"19" = "19";
-
"2" = "2";
-
"2 inches/sec." = "2 inches/sec.";
-
"2-Sided Printing" = "2-Sided Printing";
-
"2.00x0.37\"" = "2.00x0.37\"";
-
"2.00x0.50\"" = "2.00x0.50\"";
-
"2.00x1.00\"" = "2.00x1.00\"";
-
"2.00x1.25\"" = "2.00x1.25\"";
-
"2.00x2.00\"" = "2.00x2.00\"";
-
"2.00x3.00\"" = "2.00x3.00\"";
-
"2.00x4.00\"" = "2.00x4.00\"";
-
"2.00x5.50\"" = "2.00x5.50\"";
-
"2.25x0.50\"" = "2.25x0.50\"";
-
"2.25x1.25\"" = "2.25x1.25\"";
-
"2.25x4.00\"" = "2.25x4.00\"";
-
"2.25x5.50\"" = "2.25x5.50\"";
-
"2.38x5.50\"" = "2.38x5.50\"";
-
"2.5 inches/sec." = "2.5 inches/sec.";
-
"2.50x1.00\"" = "2.50x1.00\"";
-
"2.50x2.00\"" = "2.50x2.00\"";
-
"2.75x1.25\"" = "2.75x1.25\"";
-
"2.9 x 1\"" = "2.9 x 1\"";
-
"20" = "20";
-
"20 mm/sec." = "20 mm/sec.";
-
"200 mm/sec." = "200 mm/sec.";
-
"203dpi" = "203dpi";
-
"21" = "21";
-
"22" = "22";
-
"23" = "23";
-
"24" = "24";
-
"24-Pin Series" = "24-Pin Series";
-
"240x72dpi" = "240x72dpi";
-
"25" = "25";
-
"250 mm/sec." = "250 mm/sec.";
-
"26" = "26";
-
"27" = "27";
-
"28" = "28";
-
"29" = "29";
-
"3" = "3";
-
"3 inches/sec." = "3 inches/sec.";
-
"3.00x1.00\"" = "3.00x1.00\"";
-
"3.00x1.25\"" = "3.00x1.25\"";
-
"3.00x2.00\"" = "3.00x2.00\"";
-
"3.00x3.00\"" = "3.00x3.00\"";
-
"3.00x5.00\"" = "3.00x5.00\"";
-
"3.25x2.00\"" = "3.25x2.00\"";
-
"3.25x5.00\"" = "3.25x5.00\"";
-
"3.25x5.50\"" = "3.25x5.50\"";
-
"3.25x5.83\"" = "3.25x5.83\"";
-
"3.25x7.83\"" = "3.25x7.83\"";
-
"3.5\" Disk" = "3.5\" Disk";
-
"3.5\" Disk - 2 1/8 x 2 3/4\"" = "3.5\" Disk - 2 1/8 x 2 3/4\"";
-
"3.50x1.00\"" = "3.50x1.00\"";
-
"30" = "30";
-
"30 mm/sec." = "30 mm/sec.";
-
"300 mm/sec." = "300 mm/sec.";
-
"300dpi" = "300dpi";
-
"35" = "35";
-
"360dpi" = "360dpi";
-
"360x180dpi" = "360x180dpi";
-
"4" = "4";
-
"4 inches/sec." = "4 inches/sec.";
-
"4.00x1.00\"" = "4.00x1.00\"";
-
"4.00x13.00\"" = "4.00x13.00\"";
-
"4.00x2.00\"" = "4.00x2.00\"";
-
"4.00x2.50\"" = "4.00x2.50\"";
-
"4.00x3.00\"" = "4.00x3.00\"";
-
"4.00x4.00\"" = "4.00x4.00\"";
-
"4.00x5.00\"" = "4.00x5.00\"";
-
"4.00x6.00\"" = "4.00x6.00\"";
-
"4.00x6.50\"" = "4.00x6.50\"";
-
"40" = "40";
-
"40 mm/sec." = "40 mm/sec.";
-
"45" = "45";
-
"5" = "5";
-
"5 inches/sec." = "5 inches/sec.";
-
"50" = "50";
-
"55" = "55";
-
"6" = "6";
-
"6 inches/sec." = "6 inches/sec.";
-
"6.00x1.00\"" = "6.00x1.00\"";
-
"6.00x2.00\"" = "6.00x2.00\"";
-
"6.00x3.00\"" = "6.00x3.00\"";
-
"6.00x4.00\"" = "6.00x4.00\"";
-
"6.00x5.00\"" = "6.00x5.00\"";
-
"6.00x6.00\"" = "6.00x6.00\"";
-
"6.00x6.50\"" = "6.00x6.50\"";
-
"60" = "60";
-
"60 mm/sec." = "60 mm/sec.";
-
"600dpi" = "600dpi";
-
"60dpi" = "60dpi";
-
"60x72dpi" = "60x72dpi";
-
"65" = "65";
-
"7" = "7";
-
"7 inches/sec." = "7 inches/sec.";
-
"7 x 9\"" = "7 x 9\"";
-
"70" = "70";
-
"720dpi" = "720dpi";
-
"75" = "75";
-
"8" = "8";
-
"8 inches/sec." = "8 inches/sec.";
-
"8 x 10\"" = "8 x 10\"";
-
"8.00x1.00\"" = "8.00x1.00\"";
-
"8.00x2.00\"" = "8.00x2.00\"";
-
"8.00x3.00\"" = "8.00x3.00\"";
-
"8.00x4.00\"" = "8.00x4.00\"";
-
"8.00x5.00\"" = "8.00x5.00\"";
-
"8.00x6.00\"" = "8.00x6.00\"";
-
"8.00x6.50\"" = "8.00x6.50\"";
-
"80" = "80";
-
"80 mm/sec." = "80 mm/sec.";
-
"85" = "85";
-
"9" = "9";
-
"9 inches/sec." = "9 inches/sec.";
-
"9 x 11\"" = "9 x 11\"";
-
"9 x 12\"" = "9 x 12\"";
-
"9-Pin Series" = "9-Pin Series";
-
"90" = "90";
-
"95" = "95";
-
"?Invalid help command unknown." = "?Invalid help command unknown.";
-
"A Samba password is required to export printer drivers" = "A Samba password is required to export printer drivers";
-
"A Samba username is required to export printer drivers" = "A Samba username is required to export printer drivers";
-
-"A class named \"%s\" already exists" = "A class named \"%s\" already exists";
-
-"A printer named \"%s\" already exists" = "A printer named \"%s\" already exists";
-
+"A class named \"%s\" already exists." = "A class named \"%s\" already exists.";
+"A printer named \"%s\" already exists." = "A printer named \"%s\" already exists.";
"A0" = "A0";
-
"A1" = "A1";
-
"A10" = "A10";
-
"A2" = "A2";
-
"A3" = "A3";
-
-"A3 (Oversize)" = "A3 (Oversize)";
-
+"A3 Oversize" = "A3 Oversize";
"A4" = "A4";
-
-"A4 (Oversize)" = "A4 (Oversize)";
-
-"A4 (Small)" = "A4 (Small)";
-
+"A4 Oversize" = "A4 Oversize";
+"A4 Small" = "A4 Small";
"A5" = "A5";
-
-"A5 (Oversize)" = "A5 (Oversize)";
-
+"A5 Oversize" = "A5 Oversize";
"A6" = "A6";
-
"A7" = "A7";
-
"A8" = "A8";
-
"A9" = "A9";
-
"ANSI A" = "ANSI A";
-
"ANSI B" = "ANSI B";
-
"ANSI C" = "ANSI C";
-
"ANSI D" = "ANSI D";
-
"ANSI E" = "ANSI E";
-
-"ARCH A" = "ARCH A";
-
-"ARCH B" = "ARCH B";
-
"ARCH C" = "ARCH C";
-
"ARCH D" = "ARCH D";
-
"ARCH E" = "ARCH E";
-
"Accept Jobs" = "Accept Jobs";
-
"Accepted" = "Accepted";
-
"Add Class" = "Add Class";
-
"Add Printer" = "Add Printer";
-
"Add RSS Subscription" = "Add RSS Subscription";
-
"Address" = "Address";
-
"Address - 1 1/8 x 3 1/2\"" = "Address - 1 1/8 x 3 1/2\"";
-
"Administration" = "Administration";
-
"Always" = "Always";
-
"AppSocket/HP JetDirect" = "AppSocket/HP JetDirect";
-
"Applicator" = "Applicator";
-
-"Attempt to set %s printer-state to bad value %d" = "Attempt to set %s printer-state to bad value %d";
-
-"Attribute groups are out of order (%x < %x)" = "Attribute groups are out of order (%x < %x)";
-
+"Attempt to set %s printer-state to bad value %d." = "Attempt to set %s printer-state to bad value %d.";
+"Attribute groups are out of order (%x < %x)." = "Attribute groups are out of order (%x < %x).";
"B0" = "B0";
-
"B1" = "B1";
-
"B10" = "B10";
-
"B2" = "B2";
-
"B3" = "B3";
-
"B4" = "B4";
-
"B5" = "B5";
-
+"B5 JIS" = "B5 JIS";
+"B5 Oversize" = "B5 Oversize";
"B6" = "B6";
-
"B7" = "B7";
-
"B8" = "B8";
-
"B9" = "B9";
-
"Bad NULL dests pointer" = "Bad NULL dests pointer";
-
"Bad OpenGroup" = "Bad OpenGroup";
-
"Bad OpenUI/JCLOpenUI" = "Bad OpenUI/JCLOpenUI";
-
"Bad OrderDependency" = "Bad OrderDependency";
-
"Bad PPD cache file." = "Bad PPD cache file.";
-
"Bad Request" = "Bad Request";
-
"Bad SNMP version number" = "Bad SNMP version number";
-
"Bad UIConstraints" = "Bad UIConstraints";
-
"Bad charset file \"%s\"." = "Bad charset file \"%s\".";
-
"Bad charset type: %s" = "Bad charset type: %s";
-
"Bad columns value %d." = "Bad columns value %d.";
-
"Bad copies value %d." = "Bad copies value %d.";
-
"Bad cpi value %f." = "Bad cpi value %f.";
-
"Bad custom parameter" = "Bad custom parameter";
-
-"Bad device URI \"%s\"." = "Bad device URI \"%s\".";
-
-"Bad device-uri \"%s\"" = "Bad device-uri \"%s\"";
-
-"Bad device-uri scheme \"%s\"" = "Bad device-uri scheme \"%s\"";
-
-"Bad document-format \"%s\"" = "Bad document-format \"%s\"";
-
+"Bad device-uri \"%s\"." = "Bad device-uri \"%s\".";
+"Bad device-uri scheme \"%s\"." = "Bad device-uri scheme \"%s\".";
+"Bad document-format \"%s\"." = "Bad document-format \"%s\".";
+"Bad document-format-default \"%s\"." = "Bad document-format-default \"%s\".";
"Bad filename buffer" = "Bad filename buffer";
-
"Bad font description line \"%s\"." = "Bad font description line \"%s\".";
-
"Bad font description line: %s" = "Bad font description line: %s";
-
-"Bad job-priority value" = "Bad job-priority value";
-
-"Bad job-sheets value \"%s\"" = "Bad job-sheets value \"%s\"";
-
-"Bad job-sheets value type" = "Bad job-sheets value type";
-
-"Bad job-state value" = "Bad job-state value";
-
-"Bad job-uri attribute \"%s\"" = "Bad job-uri attribute \"%s\"";
-
+"Bad job-priority value." = "Bad job-priority value.";
+"Bad job-sheets value \"%s\"." = "Bad job-sheets value \"%s\".";
+"Bad job-sheets value type." = "Bad job-sheets value type.";
+"Bad job-state value." = "Bad job-state value.";
+"Bad job-uri \"%s\"." = "Bad job-uri \"%s\".";
"Bad lpi value %f." = "Bad lpi value %f.";
-
-"Bad notify-pull-method \"%s\"" = "Bad notify-pull-method \"%s\"";
-
-"Bad notify-recipient-uri URI \"%s\"" = "Bad notify-recipient-uri URI \"%s\"";
-
+"Bad notify-pull-method \"%s\"." = "Bad notify-pull-method \"%s\".";
+"Bad notify-recipient-uri \"%s\"." = "Bad notify-recipient-uri \"%s\".";
"Bad number-up value %d." = "Bad number-up value %d.";
-
-"Bad option + choice on line %d" = "Bad option + choice on line %d";
-
+"Bad option + choice on line %d." = "Bad option + choice on line %d.";
"Bad page-ranges values %d-%d." = "Bad page-ranges values %d-%d.";
-
-"Bad port-monitor \"%s\"" = "Bad port-monitor \"%s\"";
-
-"Bad printer-state value %d" = "Bad printer-state value %d";
-
-"Bad request ID %d" = "Bad request ID %d";
-
-"Bad request version number %d.%d" = "Bad request version number %d.%d";
-
+"Bad port-monitor \"%s\"." = "Bad port-monitor \"%s\".";
+"Bad printer-state value %d." = "Bad printer-state value %d.";
+"Bad request ID %d." = "Bad request ID %d.";
+"Bad request version number %d.%d." = "Bad request version number %d.%d.";
"Bad subscription ID" = "Bad subscription ID";
-
"Bad text direction \"%s\"." = "Bad text direction \"%s\".";
-
"Bad text direction: %s" = "Bad text direction: %s";
-
"Bad text width \"%s\"." = "Bad text width \"%s\".";
-
"Bad text width: %s" = "Bad text width: %s";
-
"Bad value string" = "Bad value string";
-
"Banners" = "Banners";
-
"Billing Information: " = "Billing Information: ";
-
"Bond Paper" = "Bond Paper";
-
"Boolean expected for waiteof option \"%s\"." = "Boolean expected for waiteof option \"%s\".";
-
"Buffer overflow detected, aborting." = "Buffer overflow detected, aborting.";
-
-"C0 Envelope" = "C0 Envelope";
-
-"C1 Envelope" = "C1 Envelope";
-
-"C2 Envelope" = "C2 Envelope";
-
-"C3 Envelope" = "C3 Envelope";
-
-"C4" = "C4";
-
-"C4 Envelope" = "C4 Envelope";
-
-"C5" = "C5";
-
-"C5 Envelope" = "C5 Envelope";
-
-"C6" = "C6";
-
-"C6 Envelope" = "C6 Envelope";
-
-"C65 Envelope" = "C65 Envelope";
-
-"C7 Envelope" = "C7 Envelope";
-
"CMYK" = "CMYK";
-
"CPCL Label Printer" = "CPCL Label Printer";
-
"Cancel RSS Subscription" = "Cancel RSS Subscription";
-
"Canceling print job." = "Canceling print job.";
-
"Cassette" = "Cassette";
-
"Change Settings" = "Change Settings";
-
-"Character set \"%s\" not supported" = "Character set \"%s\" not supported";
-
-"Chou3 Envelope" = "Chou3 Envelope";
-
-"Chou4 Envelope" = "Chou4 Envelope";
-
+"Character set \"%s\" not supported." = "Character set \"%s\" not supported.";
"Classes" = "Classes";
-
"Clean Print Heads" = "Clean Print Heads";
-
"Close-Job doesn't support the job-uri attribute." = "Close-Job doesn't support the job-uri attribute.";
-
"Color" = "Color";
-
"Color Mode" = "Color Mode";
-
"Commands may be abbreviated. Commands are:\n\nexit help quit status ?" = "Commands may be abbreviated. Commands are:\n\nexit help quit status ?";
-
"Community name uses indefinite length" = "Community name uses indefinite length";
-
"Connected to printer." = "Connected to printer.";
-
"Connecting to printer." = "Connecting to printer.";
-
"Continue" = "Continue";
-
"Continuous" = "Continuous";
-
"Control file sent successfully." = "Control file sent successfully.";
-
"Copying print data." = "Copying print data.";
-
-"Could not scan type \"%s\"" = "Could not scan type \"%s\"";
-
"Created" = "Created";
-
"Created On: " = "Created On: ";
-
"Custom" = "Custom";
-
"CustominCutInterval" = "CustominCutInterval";
-
"CustominTearInterval" = "CustominTearInterval";
-
"Cut" = "Cut";
-
"Cutter" = "Cutter";
-
-"DL" = "DL";
-
-"DL Envelope" = "DL Envelope";
-
"Dark" = "Dark";
-
"Darkness" = "Darkness";
-
"Data file sent successfully." = "Data file sent successfully.";
-
"Delete Class" = "Delete Class";
-
"Delete Printer" = "Delete Printer";
-
"Description: " = "Description: ";
-
"DeskJet Series" = "DeskJet Series";
-
"Destination \"%s\" is not accepting jobs." = "Destination \"%s\" is not accepting jobs.";
-
"Device: uri = %s\n class = %s\n info = %s\n make-and-model = %s\n device-id = %s\n location = %s" = "Device: uri = %s\n class = %s\n info = %s\n make-and-model = %s\n device-id = %s\n location = %s";
-
"Direct Thermal Media" = "Direct Thermal Media";
-
"Disabled" = "Disabled";
-
-"Document %d not found in job %d." = "Document %d not found in job %d.";
-
-"Double Postcard" = "Double Postcard";
-
+"Document #%d does not exist in job #%d." = "Document #%d does not exist in job #%d.";
"Driver Name: " = "Driver Name: ";
-
"Driver Version: " = "Driver Version: ";
-
"Duplexer" = "Duplexer";
-
"Dymo" = "Dymo";
-
"EPL1 Label Printer" = "EPL1 Label Printer";
-
"EPL2 Label Printer" = "EPL2 Label Printer";
-
"Edit Configuration File" = "Edit Configuration File";
-
-"Empty PPD file" = "Empty PPD file";
-
+"Empty PPD file." = "Empty PPD file.";
"Ending Banner" = "Ending Banner";
-
"English" = "English";
-
"Enter old password:" = "Enter old password:";
-
"Enter password again:" = "Enter password again:";
-
"Enter password:" = "Enter password:";
-
"Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket." = "Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket.";
-
+"Envelope #10 " = "Envelope #10 ";
+"Envelope #11" = "Envelope #11";
+"Envelope #12" = "Envelope #12";
+"Envelope #14" = "Envelope #14";
+"Envelope #9" = "Envelope #9";
+"Envelope B4" = "Envelope B4";
+"Envelope B5" = "Envelope B5";
+"Envelope B6" = "Envelope B6";
+"Envelope C0" = "Envelope C0";
+"Envelope C1" = "Envelope C1";
+"Envelope C2" = "Envelope C2";
+"Envelope C3" = "Envelope C3";
+"Envelope C4" = "Envelope C4";
+"Envelope C5" = "Envelope C5";
+"Envelope C6" = "Envelope C6";
+"Envelope C65" = "Envelope C65";
+"Envelope C7" = "Envelope C7";
+"Envelope Choukei 3" = "Envelope Choukei 3";
+"Envelope Choukei 4" = "Envelope Choukei 4";
+"Envelope DL" = "Envelope DL";
"Envelope Feed" = "Envelope Feed";
-
+"Envelope Invite" = "Envelope Invite";
+"Envelope Italian" = "Envelope Italian";
+"Envelope Kaku2" = "Envelope Kaku2";
+"Envelope Kaku3" = "Envelope Kaku3";
+"Envelope Monarch" = "Envelope Monarch";
+"Envelope PRC1 " = "Envelope PRC1 ";
+"Envelope PRC10" = "Envelope PRC10";
+"Envelope PRC2" = "Envelope PRC2";
+"Envelope PRC3" = "Envelope PRC3";
+"Envelope PRC4" = "Envelope PRC4";
+"Envelope PRC5" = "Envelope PRC5";
+"Envelope PRC5PRC5" = "Envelope PRC5PRC5";
+"Envelope PRC6" = "Envelope PRC6";
+"Envelope PRC7" = "Envelope PRC7";
+"Envelope PRC8" = "Envelope PRC8";
+"Envelope PRC9" = "Envelope PRC9";
+"Envelope Personal" = "Envelope Personal";
+"Envelope You4" = "Envelope You4";
"Epson" = "Epson";
-
"Error Policy" = "Error Policy";
-
"Error: need hostname after \"-h\" option." = "Error: need hostname after \"-h\" option.";
-
"Every 10 Labels" = "Every 10 Labels";
-
"Every 2 Labels" = "Every 2 Labels";
-
"Every 3 Labels" = "Every 3 Labels";
-
"Every 4 Labels" = "Every 4 Labels";
-
"Every 5 Labels" = "Every 5 Labels";
-
"Every 6 Labels" = "Every 6 Labels";
-
"Every 7 Labels" = "Every 7 Labels";
-
"Every 8 Labels" = "Every 8 Labels";
-
"Every 9 Labels" = "Every 9 Labels";
-
"Every Label" = "Every Label";
-
+"Executive" = "Executive";
"Expectation Failed" = "Expectation Failed";
-
"Export Printers to Samba" = "Export Printers to Samba";
-
"FAIL" = "FAIL";
-
+"FanFold German" = "FanFold German";
+"FanFold Legal German" = "FanFold Legal German";
+"Fanfold US" = "Fanfold US";
"File Folder" = "File Folder";
-
"File Folder - 9/16 x 3 7/16\"" = "File Folder - 9/16 x 3 7/16\"";
-
-"File device URIs have been disabled! To enable, see the FileDevice directive in \"%s/cupsd.conf\"." = "File device URIs have been disabled! To enable, see the FileDevice directive in \"%s/cupsd.conf\".";
-
+"File device URIs have been disabled. To enable, see the FileDevice directive in \"%s/cupsd.conf\"." = "File device URIs have been disabled. To enable, see the FileDevice directive in \"%s/cupsd.conf\".";
"Finished page %d." = "Finished page %d.";
-
"Folio" = "Folio";
-
"Forbidden" = "Forbidden";
-
"Formatting page %d." = "Formatting page %d.";
-
"General" = "General";
-
"Generic" = "Generic";
-
-"German FanFold" = "German FanFold";
-
-"German FanFold Legal" = "German FanFold Legal";
-
"Get-Response-PDU uses indefinite length" = "Get-Response-PDU uses indefinite length";
-
"Glossy Paper" = "Glossy Paper";
-
-"Got a printer-uri attribute but no job-id" = "Got a printer-uri attribute but no job-id";
-
+"Got a printer-uri attribute but no job-id." = "Got a printer-uri attribute but no job-id.";
"Grayscale" = "Grayscale";
-
"HP" = "HP";
-
"Hanging Folder" = "Hanging Folder";
-
"Hanging Folder - 9/16 x 2\"" = "Hanging Folder - 9/16 x 2\"";
-
-"ISO B0" = "ISO B0";
-
-"ISO B1" = "ISO B1";
-
-"ISO B10" = "ISO B10";
-
-"ISO B2" = "ISO B2";
-
-"ISO B3" = "ISO B3";
-
-"ISO B4" = "ISO B4";
-
-"ISO B4 Envelope" = "ISO B4 Envelope";
-
-"ISO B5" = "ISO B5";
-
-"ISO B5 (Oversize)" = "ISO B5 (Oversize)";
-
-"ISO B5 Envelope" = "ISO B5 Envelope";
-
-"ISO B6" = "ISO B6";
-
-"ISO B6 Envelope" = "ISO B6 Envelope";
-
-"ISO B7" = "ISO B7";
-
-"ISO B8" = "ISO B8";
-
-"ISO B9" = "ISO B9";
-
"ISOLatin1" = "ISOLatin1";
-
"Illegal control character" = "Illegal control character";
-
"Illegal main keyword string" = "Illegal main keyword string";
-
"Illegal option keyword string" = "Illegal option keyword string";
-
"Illegal translation string" = "Illegal translation string";
-
"Illegal whitespace character" = "Illegal whitespace character";
-
"Installable Options" = "Installable Options";
-
"Installed" = "Installed";
-
"IntelliBar Label Printer" = "IntelliBar Label Printer";
-
"Intellitech" = "Intellitech";
-
"Internal Server Error" = "Internal Server Error";
-
"Internal error" = "Internal error";
-
"Internet Postage 2-Part" = "Internet Postage 2-Part";
-
"Internet Postage 2-Part - 2 1/4 x 7 1/2\"" = "Internet Postage 2-Part - 2 1/4 x 7 1/2\"";
-
"Internet Postage 3-Part" = "Internet Postage 3-Part";
-
"Internet Postage 3-Part - 2 1/4 x 7\"" = "Internet Postage 3-Part - 2 1/4 x 7\"";
-
"Internet Printing Protocol" = "Internet Printing Protocol";
-
-"Invite Envelope" = "Invite Envelope";
-
-"Italian Envelope" = "Italian Envelope";
-
+"JB0" = "JB0";
+"JB1" = "JB1";
+"JB10" = "JB10";
+"JB2" = "JB2";
+"JB3" = "JB3";
+"JB4" = "JB4";
+"JB6" = "JB6";
+"JB7" = "JB7";
+"JB8" = "JB8";
+"JB9" = "JB9";
"JCL" = "JCL";
-
-"Job #%d cannot be restarted - no files" = "Job #%d cannot be restarted - no files";
-
-"Job #%d does not exist" = "Job #%d does not exist";
-
+"Job #%d cannot be restarted - no files." = "Job #%d cannot be restarted - no files.";
+"Job #%d does not exist." = "Job #%d does not exist.";
"Job #%d is already aborted - can't cancel." = "Job #%d is already aborted - can't cancel.";
-
"Job #%d is already canceled - can't cancel." = "Job #%d is already canceled - can't cancel.";
-
"Job #%d is already completed - can't cancel." = "Job #%d is already completed - can't cancel.";
-
-"Job #%d is finished and cannot be altered" = "Job #%d is finished and cannot be altered";
-
-"Job #%d is not complete" = "Job #%d is not complete";
-
-"Job #%d is not held" = "Job #%d is not held";
-
-"Job #%d is not held for authentication" = "Job #%d is not held for authentication";
-
-"Job #%s does not exist" = "Job #%s does not exist";
-
-"Job %d not found" = "Job %d not found";
-
+"Job #%d is finished and cannot be altered." = "Job #%d is finished and cannot be altered.";
+"Job #%d is not complete." = "Job #%d is not complete.";
+"Job #%d is not held for authentication." = "Job #%d is not held for authentication.";
+"Job #%d is not held." = "Job #%d is not held.";
"Job Completed" = "Job Completed";
-
"Job Created" = "Job Created";
-
"Job ID: " = "Job ID: ";
-
"Job Options Changed" = "Job Options Changed";
-
"Job Stopped" = "Job Stopped";
-
"Job UUID: " = "Job UUID: ";
-
"Job is completed and cannot be changed." = "Job is completed and cannot be changed.";
-
"Job operation failed:" = "Job operation failed:";
-
"Job state cannot be changed." = "Job state cannot be changed.";
-
-"Job subscriptions cannot be renewed" = "Job subscriptions cannot be renewed";
-
+"Job subscriptions cannot be renewed." = "Job subscriptions cannot be renewed.";
"Jobs" = "Jobs";
-
-"Kaku2 Envelope" = "Kaku2 Envelope";
-
-"Kaku3 Envelope" = "Kaku3 Envelope";
-
"LPD/LPR Host or Printer" = "LPD/LPR Host or Printer";
-
"Label Printer" = "Label Printer";
-
"Label Top" = "Label Top";
-
-"Language \"%s\" not supported" = "Language \"%s\" not supported";
-
+"Language \"%s\" not supported." = "Language \"%s\" not supported.";
"Large Address" = "Large Address";
-
"Large Address - 1 4/10 x 3 1/2\"" = "Large Address - 1 4/10 x 3 1/2\"";
-
"LaserJet Series PCL 4/5" = "LaserJet Series PCL 4/5";
-
+"Letter Oversize" = "Letter Oversize";
"Light" = "Light";
-
"Line longer than the maximum allowed (255 characters)" = "Line longer than the maximum allowed (255 characters)";
-
"List Available Printers" = "List Available Printers";
-
"Loading print file." = "Loading print file.";
-
"Location: " = "Location: ";
-
"Long-Edge (Portrait)" = "Long-Edge (Portrait)";
-
"Looking for printer." = "Looking for printer.";
-
"Make and Model: " = "Make and Model: ";
-
"Manual Feed" = "Manual Feed";
-
"Media Dimensions: " = "Media Dimensions: ";
-
"Media Limits: " = "Media Limits: ";
-
"Media Name: " = "Media Name: ";
-
"Media Size" = "Media Size";
-
"Media Source" = "Media Source";
-
"Media Tracking" = "Media Tracking";
-
"Media Type" = "Media Type";
-
"Medium" = "Medium";
-
"Memory allocation error" = "Memory allocation error";
-
"Missing CloseGroup" = "Missing CloseGroup";
-
"Missing PPD-Adobe-4.x header" = "Missing PPD-Adobe-4.x header";
-
"Missing asterisk in column 1" = "Missing asterisk in column 1";
-
-"Missing document-number attribute" = "Missing document-number attribute";
-
-"Missing double quote on line %d" = "Missing double quote on line %d";
-
+"Missing document-number attribute." = "Missing document-number attribute.";
+"Missing double quote on line %d." = "Missing double quote on line %d.";
"Missing form variable" = "Missing form variable";
-
"Missing media or media-col." = "Missing media or media-col.";
-
"Missing media-size in media-col." = "Missing media-size in media-col.";
-
-"Missing notify-subscription-ids attribute" = "Missing notify-subscription-ids attribute";
-
+"Missing notify-subscription-ids attribute." = "Missing notify-subscription-ids attribute.";
"Missing option keyword" = "Missing option keyword";
-
-"Missing requesting-user-name attribute" = "Missing requesting-user-name attribute";
-
-"Missing required attributes" = "Missing required attributes";
-
-"Missing value on line %d" = "Missing value on line %d";
-
+"Missing requesting-user-name attribute." = "Missing requesting-user-name attribute.";
+"Missing required attributes." = "Missing required attributes.";
"Missing value on line %d of banner file." = "Missing value on line %d of banner file.";
-
+"Missing value on line %d." = "Missing value on line %d.";
"Missing value string" = "Missing value string";
-
"Missing x-dimension in media-size." = "Missing x-dimension in media-size.";
-
"Missing y-dimension in media-size." = "Missing y-dimension in media-size.";
-
"Model: name = %s\n natural_language = %s\n make-and-model = %s\n device-id = %s" = "Model: name = %s\n natural_language = %s\n make-and-model = %s\n device-id = %s";
-
"Modify Class" = "Modify Class";
-
"Modify Printer" = "Modify Printer";
-
"Monarch" = "Monarch";
-
-"Monarch Envelope" = "Monarch Envelope";
-
"Move All Jobs" = "Move All Jobs";
-
"Move Job" = "Move Job";
-
"Moved Permanently" = "Moved Permanently";
-
"NULL PPD file pointer" = "NULL PPD file pointer";
-
"Name OID uses indefinite length" = "Name OID uses indefinite length";
-
-"Nested classes are not allowed" = "Nested classes are not allowed";
-
+"Nested classes are not allowed." = "Nested classes are not allowed.";
"Network host \"%s\" is busy; will retry in %d seconds." = "Network host \"%s\" is busy; will retry in %d seconds.";
-
"Network printer \"%s\" is busy." = "Network printer \"%s\" is busy.";
-
"Network printer \"%s\" is not responding." = "Network printer \"%s\" is not responding.";
-
"Network printer \"%s\" is unreachable at this time." = "Network printer \"%s\" is unreachable at this time.";
-
"Network printer \"%s\" may not exist or is unavailable at this time." = "Network printer \"%s\" may not exist or is unavailable at this time.";
-
"Never" = "Never";
-
"New Stylus Color Series" = "New Stylus Color Series";
-
"New Stylus Photo Series" = "New Stylus Photo Series";
-
"No" = "No";
-
"No Content" = "No Content";
-
"No PPD name" = "No PPD name";
-
"No VarBind SEQUENCE" = "No VarBind SEQUENCE";
-
-"No Windows printer drivers are installed" = "No Windows printer drivers are installed";
-
+"No Windows printer drivers are installed." = "No Windows printer drivers are installed.";
"No active connection" = "No active connection";
-
-"No active jobs on %s" = "No active jobs on %s";
-
-"No attributes in request" = "No attributes in request";
-
-"No authentication information provided" = "No authentication information provided";
-
+"No active jobs on %s." = "No active jobs on %s.";
+"No attributes in request." = "No attributes in request.";
+"No authentication information provided." = "No authentication information provided.";
"No community name" = "No community name";
-
-"No default printer" = "No default printer";
-
+"No default printer." = "No default printer.";
"No destinations added." = "No destinations added.";
-
"No device URI found in argv[0] or in DEVICE_URI environment variable." = "No device URI found in argv[0] or in DEVICE_URI environment variable.";
-
"No error-index" = "No error-index";
-
"No error-status" = "No error-status";
-
-"No file!?" = "No file!?";
-
+"No file in print request." = "No file in print request.";
"No fonts in charset file." = "No fonts in charset file.";
-
"No modification time" = "No modification time";
-
"No name OID" = "No name OID";
-
"No pages were found." = "No pages were found.";
-
"No printer name" = "No printer name";
-
"No printer-uri found" = "No printer-uri found";
-
"No printer-uri found for class" = "No printer-uri found for class";
-
-"No printer-uri in request" = "No printer-uri in request";
-
+"No printer-uri in request." = "No printer-uri in request.";
"No request-id" = "No request-id";
-
-"No subscription attributes in request" = "No subscription attributes in request";
-
+"No subscription attributes in request." = "No subscription attributes in request.";
"No subscriptions found." = "No subscriptions found.";
-
"No variable-bindings SEQUENCE" = "No variable-bindings SEQUENCE";
-
"No version number" = "No version number";
-
"Non-continuous (Mark sensing)" = "Non-continuous (Mark sensing)";
-
"Non-continuous (Web sensing)" = "Non-continuous (Web sensing)";
-
"Normal" = "Normal";
-
"Not Found" = "Not Found";
-
"Not Implemented" = "Not Implemented";
-
"Not Installed" = "Not Installed";
-
"Not Modified" = "Not Modified";
-
"Not Supported" = "Not Supported";
-
"Not allowed to print." = "Not allowed to print.";
-
"Note" = "Note";
-
"Note: this program only validates the DSC comments, not the PostScript itself." = "Note: this program only validates the DSC comments, not the PostScript itself.";
-
"OK" = "OK";
-
"Off (1-Sided)" = "Off (1-Sided)";
-
"Oki" = "Oki";
-
"Online Help" = "Online Help";
-
"Open of %s failed: %s" = "Open of %s failed: %s";
-
"OpenGroup without a CloseGroup first" = "OpenGroup without a CloseGroup first";
-
"OpenUI/JCLOpenUI without a CloseUI/JCLCloseUI first" = "OpenUI/JCLOpenUI without a CloseUI/JCLCloseUI first";
-
"Operation Policy" = "Operation Policy";
-
"Option \"%s\" cannot be included via %%%%IncludeFeature." = "Option \"%s\" cannot be included via %%%%IncludeFeature.";
-
"Options Installed" = "Options Installed";
-
"Options:" = "Options:";
-
"Options: " = "Options: ";
-
"Out of memory." = "Out of memory.";
-
"Output Mode" = "Output Mode";
-
"Output for printer %s is sent to %s" = "Output for printer %s is sent to %s";
-
"Output for printer %s is sent to remote printer %s on %s" = "Output for printer %s is sent to remote printer %s on %s";
-
"Output for printer %s/%s is sent to %s" = "Output for printer %s/%s is sent to %s";
-
"Output for printer %s/%s is sent to remote printer %s on %s" = "Output for printer %s/%s is sent to remote printer %s on %s";
-
"PASS" = "PASS";
-
"PCL Laser Printer" = "PCL Laser Printer";
-
-"PRC1 Envelope" = "PRC1 Envelope";
-
-"PRC10 Envelope" = "PRC10 Envelope";
-
"PRC16K" = "PRC16K";
-
-"PRC2 Envelope" = "PRC2 Envelope";
-
-"PRC3 Envelope" = "PRC3 Envelope";
-
"PRC32K" = "PRC32K";
-
-"PRC32K (Oversize)" = "PRC32K (Oversize)";
-
-"PRC4 Envelope" = "PRC4 Envelope";
-
-"PRC5 Envelope" = "PRC5 Envelope";
-
-"PRC6 Envelope" = "PRC6 Envelope";
-
-"PRC7 Envelope" = "PRC7 Envelope";
-
-"PRC8 Envelope" = "PRC8 Envelope";
-
-"PRC9 Envelope" = "PRC9 Envelope";
-
+"PRC32K Oversize" = "PRC32K Oversize";
"Packet does not contain a Get-Response-PDU" = "Packet does not contain a Get-Response-PDU";
-
"Packet does not start with SEQUENCE" = "Packet does not start with SEQUENCE";
-
"ParamCustominCutInterval" = "ParamCustominCutInterval";
-
"ParamCustominTearInterval" = "ParamCustominTearInterval";
-
"Password for %s on %s? " = "Password for %s on %s? ";
-
"Password for %s required to access %s via SAMBA: " = "Password for %s required to access %s via SAMBA: ";
-
"Pause Class" = "Pause Class";
-
"Pause Printer" = "Pause Printer";
-
"Peel-Off" = "Peel-Off";
-
-"Personal Envelope" = "Personal Envelope";
-
"Photo" = "Photo";
-
"Photo Labels" = "Photo Labels";
-
"Plain Paper" = "Plain Paper";
-
"Policies" = "Policies";
-
"Port Monitor" = "Port Monitor";
-
"PostScript Printer" = "PostScript Printer";
-
"Postcard" = "Postcard";
-
+"Postcard Double" = "Postcard Double";
+"Postcard Double " = "Postcard Double ";
"Print Density" = "Print Density";
-
"Print Job:" = "Print Job:";
-
"Print Mode" = "Print Mode";
-
"Print Rate" = "Print Rate";
-
"Print Self-Test Page" = "Print Self-Test Page";
-
"Print Speed" = "Print Speed";
-
"Print Test Page" = "Print Test Page";
-
"Print and Cut" = "Print and Cut";
-
"Print and Tear" = "Print and Tear";
-
"Print file accepted - job ID %d." = "Print file accepted - job ID %d.";
-
"Print file accepted - job ID unknown." = "Print file accepted - job ID unknown.";
-
"Print file sent." = "Print file sent.";
-
"Print file was not accepted: %s" = "Print file was not accepted: %s";
-
"Printed For: " = "Printed For: ";
-
"Printed From: " = "Printed From: ";
-
"Printed On: " = "Printed On: ";
-
"Printer Added" = "Printer Added";
-
"Printer Default" = "Printer Default";
-
"Printer Deleted" = "Printer Deleted";
-
"Printer Modified" = "Printer Modified";
-
"Printer Name: " = "Printer Name: ";
-
"Printer Paused" = "Printer Paused";
-
"Printer Settings" = "Printer Settings";
-
"Printer busy, will retry in 10 seconds." = "Printer busy, will retry in 10 seconds.";
-
"Printer busy; will retry in 10 seconds." = "Printer busy; will retry in 10 seconds.";
-
"Printer busy; will retry in 30 seconds." = "Printer busy; will retry in 30 seconds.";
-
"Printer did not respond after %d seconds." = "Printer did not respond after %d seconds.";
-
"Printer does not support IPP/%d.%d, trying IPP/%s." = "Printer does not support IPP/%d.%d, trying IPP/%s.";
-
"Printer is busy, will retry in 5 seconds." = "Printer is busy, will retry in 5 seconds.";
-
"Printer is not currently connected." = "Printer is not currently connected.";
-
"Printer is now connected." = "Printer is now connected.";
-
"Printer is now online." = "Printer is now online.";
-
"Printer is offline." = "Printer is offline.";
-
"Printer not connected, will retry in 30 seconds." = "Printer not connected, will retry in 30 seconds.";
-
"Printer not connected; will retry in 30 seconds." = "Printer not connected; will retry in 30 seconds.";
-
"Printer:" = "Printer:";
-
"Printers" = "Printers";
-
"Printing page %d, %d%% complete." = "Printing page %d, %d%% complete.";
-
"Printing page %d." = "Printing page %d.";
-
"Purge Jobs" = "Purge Jobs";
-
"Quarto" = "Quarto";
-
"Quota limit reached." = "Quota limit reached.";
-
"Rank Owner Job File(s) Total Size" = "Rank Owner Job File(s) Total Size";
-
"Rank Owner Pri Job Files Total Size" = "Rank Owner Pri Job Files Total Size";
-
"Ready to print." = "Ready to print.";
-
"Reject Jobs" = "Reject Jobs";
-
"Remote host did not accept control file (%d)." = "Remote host did not accept control file (%d).";
-
"Remote host did not accept data file (%d)." = "Remote host did not accept data file (%d).";
-
"Reprint After Error" = "Reprint After Error";
-
"Request Entity Too Large" = "Request Entity Too Large";
-
"Resolution" = "Resolution";
-
"Resume Class" = "Resume Class";
-
"Resume Printer" = "Resume Printer";
-
"Return Address" = "Return Address";
-
"Return Address - 3/4 x 2\"" = "Return Address - 3/4 x 2\"";
-
"Rewind" = "Rewind";
-
"Running command: %s %s -N -A %s -c '%s'" = "Running command: %s %s -N -A %s -c '%s'";
-
"SEQUENCE uses indefinite length" = "SEQUENCE uses indefinite length";
-
"SSL/TLS Negotiation Error" = "SSL/TLS Negotiation Error";
-
"See Other" = "See Other";
-
"Sending data to printer." = "Sending data to printer.";
-
"Serial Port #%d" = "Serial Port #%d";
-
"Server Restarted" = "Server Restarted";
-
"Server Security Auditing" = "Server Security Auditing";
-
"Server Started" = "Server Started";
-
"Server Stopped" = "Server Stopped";
-
"Service Unavailable" = "Service Unavailable";
-
"Set Allowed Users" = "Set Allowed Users";
-
"Set As Server Default" = "Set As Server Default";
-
"Set Class Options" = "Set Class Options";
-
"Set Printer Options" = "Set Printer Options";
-
"Set Publishing" = "Set Publishing";
-
"Shipping Address" = "Shipping Address";
-
"Shipping Address - 2 5/16 x 4\"" = "Shipping Address - 2 5/16 x 4\"";
-
"Short-Edge (Landscape)" = "Short-Edge (Landscape)";
-
"Special Paper" = "Special Paper";
-
"Spooling job, %.0f%% complete." = "Spooling job, %.0f%% complete.";
-
"Standard" = "Standard";
-
"Starting Banner" = "Starting Banner";
-
"Starting page %d." = "Starting page %d.";
-
"Statement" = "Statement";
-
"Stylus Color Series" = "Stylus Color Series";
-
"Stylus Photo Series" = "Stylus Photo Series";
-
+"Subscription #%d does not exist." = "Subscription #%d does not exist.";
"Super A" = "Super A";
-
"Super B" = "Super B";
-
"Super B/A3" = "Super B/A3";
-
"Switching Protocols" = "Switching Protocols";
-
"Tabloid" = "Tabloid";
-
-"Tabloid (Oversize)" = "Tabloid (Oversize)";
-
+"Tabloid Oversize" = "Tabloid Oversize";
"Tear" = "Tear";
-
"Tear-Off" = "Tear-Off";
-
"Tear-Off Adjust Position" = "Tear-Off Adjust Position";
-
"The %s attribute cannot be provided with job-ids." = "The %s attribute cannot be provided with job-ids.";
-
"The PPD file \"%s\" could not be found." = "The PPD file \"%s\" could not be found.";
-
"The PPD file \"%s\" could not be opened: %s" = "The PPD file \"%s\" could not be opened: %s";
-
"The PPD file could not be opened." = "The PPD file could not be opened.";
-
"The class name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#)." = "The class name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#).";
-
"The developer unit needs to be replaced." = "The developer unit needs to be replaced.";
-
"The developer unit will need to be replaced soon." = "The developer unit will need to be replaced soon.";
-
"The fuser's temperature is high." = "The fuser's temperature is high.";
-
"The fuser's temperature is low." = "The fuser's temperature is low.";
-
"The notify-lease-duration attribute cannot be used with job subscriptions." = "The notify-lease-duration attribute cannot be used with job subscriptions.";
-
-"The notify-user-data value is too large (%d > 63 octets)" = "The notify-user-data value is too large (%d > 63 octets)";
-
+"The notify-user-data value is too large (%d > 63 octets)." = "The notify-user-data value is too large (%d > 63 octets).";
"The optical photoconductor needs to be replaced." = "The optical photoconductor needs to be replaced.";
-
"The optical photoconductor will need to be replaced soon." = "The optical photoconductor will need to be replaced soon.";
-
"The output bin is almost full." = "The output bin is almost full.";
-
"The output bin is full." = "The output bin is full.";
-
"The output bin is missing." = "The output bin is missing.";
-
"The page setup information was not valid." = "The page setup information was not valid.";
-
"The paper tray is almost empty." = "The paper tray is almost empty.";
-
"The paper tray is empty." = "The paper tray is empty.";
-
"The paper tray is missing." = "The paper tray is missing.";
-
"The paper tray needs to be filled." = "The paper tray needs to be filled.";
-
"The print file could not be opened." = "The print file could not be opened.";
-
"The printer URI is incorrect or no longer exists." = "The printer URI is incorrect or no longer exists.";
-
"The printer is almost out of ink." = "The printer is almost out of ink.";
-
"The printer is low on toner." = "The printer is low on toner.";
-
+"The printer is not connected." = "The printer is not connected.";
"The printer is not responding." = "The printer is not responding.";
-
-"The printer is offline." = "The printer is offline.";
-
"The printer is out of ink." = "The printer is out of ink.";
-
"The printer is out of toner." = "The printer is out of toner.";
-
"The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#)." = "The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#).";
-
-"The printer or class is not shared" = "The printer or class is not shared";
-
-"The printer or class was not found." = "The printer or class was not found.";
-
+"The printer or class does not exist." = "The printer or class does not exist.";
+"The printer or class is not shared." = "The printer or class is not shared.";
"The printer's cover is open." = "The printer's cover is open.";
-
"The printer's door is open." = "The printer's door is open.";
-
"The printer's interlock is open." = "The printer's interlock is open.";
-
"The printer's waste bin is almost full." = "The printer's waste bin is almost full.";
-
"The printer's waste bin is full." = "The printer's waste bin is full.";
-
"The printer-uri \"%s\" contains invalid characters." = "The printer-uri \"%s\" contains invalid characters.";
-
-"The printer-uri attribute is required" = "The printer-uri attribute is required";
-
+"The printer-uri attribute is required." = "The printer-uri attribute is required.";
"The printer-uri must be of the form \"ipp://HOSTNAME/classes/CLASSNAME\"." = "The printer-uri must be of the form \"ipp://HOSTNAME/classes/CLASSNAME\".";
-
"The printer-uri must be of the form \"ipp://HOSTNAME/printers/PRINTERNAME\"." = "The printer-uri must be of the form \"ipp://HOSTNAME/printers/PRINTERNAME\".";
-
"The subscription name may not contain spaces, slashes (/), question marks (?), or the pound sign (#)." = "The subscription name may not contain spaces, slashes (/), question marks (?), or the pound sign (#).";
-
"The web interface is currently disabled. Run \"cupsctl WebInterface=yes\" to enable it." = "The web interface is currently disabled. Run \"cupsctl WebInterface=yes\" to enable it.";
-
"The which-jobs value \"%s\" is not supported." = "The which-jobs value \"%s\" is not supported.";
-
"There are too many subscriptions." = "There are too many subscriptions.";
-
"There is a paper jam." = "There is a paper jam.";
-
"There was an unrecoverable USB error." = "There was an unrecoverable USB error.";
-
"Thermal Transfer Media" = "Thermal Transfer Media";
-
"This printer does not conform to the IPP standard and may not work." = "This printer does not conform to the IPP standard and may not work.";
-
+"This printer does not conform to the IPP standard. Please contact the manufacturer of your printer for assistance." = "This printer does not conform to the IPP standard. Please contact the manufacturer of your printer for assistance.";
"Title: " = "Title: ";
-
"Too many active jobs." = "Too many active jobs.";
-
-"Too many job-sheets values (%d > 2)" = "Too many job-sheets values (%d > 2)";
-
-"Too many printer-state-reasons values (%d > %d)" = "Too many printer-state-reasons values (%d > %d)";
-
+"Too many job-sheets values (%d > 2)." = "Too many job-sheets values (%d > 2).";
+"Too many printer-state-reasons values (%d > %d)." = "Too many printer-state-reasons values (%d > %d).";
"Transparency" = "Transparency";
-
"Tray" = "Tray";
-
"Tray 1" = "Tray 1";
-
"Tray 2" = "Tray 2";
-
"Tray 3" = "Tray 3";
-
"Tray 4" = "Tray 4";
-
"URI Too Long" = "URI Too Long";
-
-"US Executive" = "US Executive";
-
-"US Fanfold" = "US Fanfold";
-
"US Ledger" = "US Ledger";
-
"US Legal" = "US Legal";
-
-"US Legal (Oversize)" = "US Legal (Oversize)";
-
+"US Legal Oversize" = "US Legal Oversize";
"US Letter" = "US Letter";
-
-"US Letter (Oversize)" = "US Letter (Oversize)";
-
-"US Letter (Small)" = "US Letter (Small)";
-
+"US Letter Oversize" = "US Letter Oversize";
+"US Letter Small" = "US Letter Small";
"USB Serial Port #%d" = "USB Serial Port #%d";
-
"Unable to access cupsd.conf file:" = "Unable to access cupsd.conf file:";
-
"Unable to add RSS subscription:" = "Unable to add RSS subscription:";
-
"Unable to add class:" = "Unable to add class:";
-
"Unable to add file to job: %s" = "Unable to add file to job: %s";
-
-"Unable to add job for destination \"%s\"" = "Unable to add job for destination \"%s\"";
-
+"Unable to add job for destination \"%s\"." = "Unable to add job for destination \"%s\".";
"Unable to add printer:" = "Unable to add printer:";
-
-"Unable to allocate memory for file types" = "Unable to allocate memory for file types";
-
+"Unable to allocate memory for file types." = "Unable to allocate memory for file types.";
"Unable to allocate memory for page info" = "Unable to allocate memory for page info";
-
"Unable to allocate memory for pages array" = "Unable to allocate memory for pages array";
-
"Unable to cancel RSS subscription:" = "Unable to cancel RSS subscription:";
-
"Unable to cancel job: %s" = "Unable to cancel job: %s";
-
"Unable to change printer-is-shared attribute:" = "Unable to change printer-is-shared attribute:";
-
"Unable to change printer:" = "Unable to change printer:";
-
"Unable to change server settings:" = "Unable to change server settings:";
-
"Unable to connect to host." = "Unable to connect to host.";
-
"Unable to connect to server" = "Unable to connect to server";
-
"Unable to contact printer, queuing on next printer in class." = "Unable to contact printer, queuing on next printer in class.";
-
-"Unable to copy 64-bit CUPS printer driver files (%d)" = "Unable to copy 64-bit CUPS printer driver files (%d)";
-
-"Unable to copy 64-bit Windows printer driver files (%d)" = "Unable to copy 64-bit Windows printer driver files (%d)";
-
-"Unable to copy CUPS printer driver files (%d)" = "Unable to copy CUPS printer driver files (%d)";
-
-"Unable to copy PPD file" = "Unable to copy PPD file";
-
+"Unable to copy 64-bit CUPS printer driver files (%d)." = "Unable to copy 64-bit CUPS printer driver files (%d).";
+"Unable to copy 64-bit Windows printer driver files (%d)." = "Unable to copy 64-bit Windows printer driver files (%d).";
+"Unable to copy CUPS printer driver files (%d)." = "Unable to copy CUPS printer driver files (%d).";
"Unable to copy PPD file - %s" = "Unable to copy PPD file - %s";
-
-"Unable to copy Windows 2000 printer driver files (%d)" = "Unable to copy Windows 2000 printer driver files (%d)";
-
-"Unable to copy Windows 9x printer driver files (%d)" = "Unable to copy Windows 9x printer driver files (%d)";
-
+"Unable to copy PPD file." = "Unable to copy PPD file.";
+"Unable to copy Windows 2000 printer driver files (%d)." = "Unable to copy Windows 2000 printer driver files (%d).";
+"Unable to copy Windows 9x printer driver files (%d)." = "Unable to copy Windows 9x printer driver files (%d).";
"Unable to copy interface script - %s" = "Unable to copy interface script - %s";
-
"Unable to copy print file" = "Unable to copy print file";
-
"Unable to create compressed print file" = "Unable to create compressed print file";
-
"Unable to create pipes for filters" = "Unable to create pipes for filters";
-
"Unable to create printer-uri" = "Unable to create printer-uri";
-
"Unable to create temporary file" = "Unable to create temporary file";
-
"Unable to create temporary file:" = "Unable to create temporary file:";
-
"Unable to delete class:" = "Unable to delete class:";
-
"Unable to delete printer:" = "Unable to delete printer:";
-
"Unable to do maintenance command:" = "Unable to do maintenance command:";
-
"Unable to edit cupsd.conf files larger than 1MB" = "Unable to edit cupsd.conf files larger than 1MB";
-
"Unable to establish a secure connection to host (certificate chain invalid)." = "Unable to establish a secure connection to host (certificate chain invalid).";
-
"Unable to establish a secure connection to host (certificate not yet valid)." = "Unable to establish a secure connection to host (certificate not yet valid).";
-
"Unable to establish a secure connection to host (expired certificate)." = "Unable to establish a secure connection to host (expired certificate).";
-
"Unable to establish a secure connection to host (host name mismatch)." = "Unable to establish a secure connection to host (host name mismatch).";
-
"Unable to establish a secure connection to host (peer dropped connection before responding)." = "Unable to establish a secure connection to host (peer dropped connection before responding).";
-
"Unable to establish a secure connection to host (self-signed certificate)." = "Unable to establish a secure connection to host (self-signed certificate).";
-
"Unable to establish a secure connection to host (untrusted certificate)." = "Unable to establish a secure connection to host (untrusted certificate).";
-
"Unable to establish a secure connection to host." = "Unable to establish a secure connection to host.";
-
"Unable to find destination for job" = "Unable to find destination for job";
-
"Unable to find printer." = "Unable to find printer.";
-
"Unable to fork filter" = "Unable to fork filter";
-
"Unable to generate compressed print file" = "Unable to generate compressed print file";
-
"Unable to get class list:" = "Unable to get class list:";
-
"Unable to get class status:" = "Unable to get class status:";
-
"Unable to get job attributes: %s" = "Unable to get job attributes: %s";
-
"Unable to get list of printer drivers:" = "Unable to get list of printer drivers:";
-
"Unable to get printer attributes:" = "Unable to get printer attributes:";
-
"Unable to get printer list:" = "Unable to get printer list:";
-
"Unable to get printer status:" = "Unable to get printer status:";
-
"Unable to get printer status: %s" = "Unable to get printer status: %s";
-
-"Unable to install Windows 2000 printer driver files (%d)" = "Unable to install Windows 2000 printer driver files (%d)";
-
-"Unable to install Windows 9x printer driver files (%d)" = "Unable to install Windows 9x printer driver files (%d)";
-
+"Unable to install Windows 2000 printer driver files (%d)." = "Unable to install Windows 2000 printer driver files (%d).";
+"Unable to install Windows 9x printer driver files (%d)." = "Unable to install Windows 9x printer driver files (%d).";
"Unable to locate printer \"%s\"." = "Unable to locate printer \"%s\".";
-
"Unable to locate printer." = "Unable to locate printer.";
-
"Unable to modify class:" = "Unable to modify class:";
-
"Unable to modify printer:" = "Unable to modify printer:";
-
"Unable to move job" = "Unable to move job";
-
"Unable to move jobs" = "Unable to move jobs";
-
"Unable to open PPD file" = "Unable to open PPD file";
-
"Unable to open PPD file:" = "Unable to open PPD file:";
-
"Unable to open charset file" = "Unable to open charset file";
-
"Unable to open compressed print file" = "Unable to open compressed print file";
-
"Unable to open cupsd.conf file:" = "Unable to open cupsd.conf file:";
-
"Unable to open device file" = "Unable to open device file";
-
-"Unable to open document %d in job %d" = "Unable to open document %d in job %d";
-
+"Unable to open document #%d in job #%d." = "Unable to open document #%d in job #%d.";
"Unable to open print file" = "Unable to open print file";
-
"Unable to open psglyphs" = "Unable to open psglyphs";
-
"Unable to open raster file" = "Unable to open raster file";
-
"Unable to print %d text columns." = "Unable to print %d text columns.";
-
"Unable to print %dx%d text page." = "Unable to print %dx%d text page.";
-
"Unable to print test page:" = "Unable to print test page:";
-
-"Unable to print: the printer does not conform to the IPP standard." = "Unable to print: the printer does not conform to the IPP standard.";
-
"Unable to read print data" = "Unable to read print data";
-
"Unable to read print data." = "Unable to read print data.";
-
"Unable to run \"%s\": %s" = "Unable to run \"%s\": %s";
-
"Unable to see in file" = "Unable to see in file";
-
"Unable to send command to printer driver" = "Unable to send command to printer driver";
-
"Unable to send data to printer." = "Unable to send data to printer.";
-
"Unable to send raster data to the driver." = "Unable to send raster data to the driver.";
-
-"Unable to set Windows printer driver (%d)" = "Unable to set Windows printer driver (%d)";
-
+"Unable to set Windows printer driver (%d)." = "Unable to set Windows printer driver (%d).";
"Unable to set options:" = "Unable to set options:";
-
"Unable to set server default:" = "Unable to set server default:";
-
"Unable to upload cupsd.conf file:" = "Unable to upload cupsd.conf file:";
-
"Unable to use legacy USB class driver." = "Unable to use legacy USB class driver.";
-
"Unable to write print data" = "Unable to write print data";
-
"Unable to write uncompressed print data: %s" = "Unable to write uncompressed print data: %s";
-
"Unauthorized" = "Unauthorized";
-
"Units" = "Units";
-
"Unknown" = "Unknown";
-
"Unknown choice \"%s\" for option \"%s\"." = "Unknown choice \"%s\" for option \"%s\".";
-
"Unknown encryption option value: \"%s\"." = "Unknown encryption option value: \"%s\".";
-
"Unknown file order: \"%s\"." = "Unknown file order: \"%s\".";
-
"Unknown format character: \"%c\"." = "Unknown format character: \"%c\".";
-
"Unknown option \"%s\" with value \"%s\"." = "Unknown option \"%s\" with value \"%s\".";
-
"Unknown option \"%s\"." = "Unknown option \"%s\".";
-
"Unknown print mode: \"%s\"." = "Unknown print mode: \"%s\".";
-
"Unknown printer-error-policy \"%s\"." = "Unknown printer-error-policy \"%s\".";
-
"Unknown printer-op-policy \"%s\"." = "Unknown printer-op-policy \"%s\".";
-
"Unknown version option value: \"%s\"." = "Unknown version option value: \"%s\".";
-
"Unsupported baud rate: %s" = "Unsupported baud rate: %s";
-
"Unsupported brightness value %s, using brightness=100." = "Unsupported brightness value %s, using brightness=100.";
-
-"Unsupported character set \"%s\"" = "Unsupported character set \"%s\"";
-
-"Unsupported compression \"%s\"" = "Unsupported compression \"%s\"";
-
-"Unsupported document-format \"%s\"" = "Unsupported document-format \"%s\"";
-
-"Unsupported format '%s'" = "Unsupported format '%s'";
-
-"Unsupported format '%s/%s'" = "Unsupported format '%s/%s'";
-
+"Unsupported character set \"%s\"." = "Unsupported character set \"%s\".";
+"Unsupported compression \"%s\"." = "Unsupported compression \"%s\".";
+"Unsupported document-format \"%s\"." = "Unsupported document-format \"%s\".";
+"Unsupported document-format \"%s/%s\"." = "Unsupported document-format \"%s/%s\".";
+"Unsupported format \"%s\"." = "Unsupported format \"%s\".";
"Unsupported gamma value %s, using gamma=1000." = "Unsupported gamma value %s, using gamma=1000.";
-
"Unsupported margins." = "Unsupported margins.";
-
"Unsupported media value." = "Unsupported media value.";
-
"Unsupported number-up value %d, using number-up=1." = "Unsupported number-up value %d, using number-up=1.";
-
"Unsupported number-up-layout value %s, using number-up-layout=lrtb." = "Unsupported number-up-layout value %s, using number-up-layout=lrtb.";
-
"Unsupported page-border value %s, using page-border=none." = "Unsupported page-border value %s, using page-border=none.";
-
"Unsupported value type" = "Unsupported value type";
-
"Upgrade Required" = "Upgrade Required";
-
"Usage:\n\n lpadmin [-h server] -d destination\n lpadmin [-h server] -x destination\n lpadmin [-h server] -p printer [-c add-class] [-i interface] [-m model]\n [-r remove-class] [-v device] [-D description]\n [-P ppd-file] [-o name=value]\n [-u allow:user,user] [-u deny:user,user]" = "Usage:\n\n lpadmin [-h server] -d destination\n lpadmin [-h server] -x destination\n lpadmin [-h server] -p printer [-c add-class] [-i interface] [-m model]\n [-r remove-class] [-v device] [-D description]\n [-P ppd-file] [-o name=value]\n [-u allow:user,user] [-u deny:user,user]";
-
"Usage: %s job user title copies options [filename]" = "Usage: %s job user title copies options [filename]";
-
"Usage: %s job-id user title copies options [file]" = "Usage: %s job-id user title copies options [file]";
-
"Usage: %s job-id user title copies options file" = "Usage: %s job-id user title copies options file";
-
"Usage: convert [ options ]" = "Usage: convert [ options ]";
-
"Usage: cupsaddsmb [options] printer1 ... printerN" = "Usage: cupsaddsmb [options] printer1 ... printerN";
-
"Usage: cupsctl [options] [param=value ... paramN=valueN]" = "Usage: cupsctl [options] [param=value ... paramN=valueN]";
-
"Usage: cupsd [options]" = "Usage: cupsd [options]";
-
-"Usage: cupsfilter -m mime/type [ options ] filename" = "Usage: cupsfilter -m mime/type [ options ] filename";
-
+"Usage: cupsfilter [ options ] filename" = "Usage: cupsfilter [ options ] filename";
"Usage: cupstestdsc [options] filename.ps [... filename.ps]" = "Usage: cupstestdsc [options] filename.ps [... filename.ps]";
-
"Usage: cupstestppd [options] filename1.ppd[.gz] [... filenameN.ppd[.gz]]" = "Usage: cupstestppd [options] filename1.ppd[.gz] [... filenameN.ppd[.gz]]";
-
"Usage: ipptool [options] URI filename [ ... filenameN ]" = "Usage: ipptool [options] URI filename [ ... filenameN ]";
-
"Usage: lpmove job/src dest" = "Usage: lpmove job/src dest";
-
"Usage: lpoptions [-h server] [-E] -d printer\n lpoptions [-h server] [-E] [-p printer] -l\n lpoptions [-h server] [-E] -p printer -o option[=value] ...\n lpoptions [-h server] [-E] -x printer" = "Usage: lpoptions [-h server] [-E] -d printer\n lpoptions [-h server] [-E] [-p printer] -l\n lpoptions [-h server] [-E] -p printer -o option[=value] ...\n lpoptions [-h server] [-E] -x printer";
-
"Usage: lppasswd [-g groupname]" = "Usage: lppasswd [-g groupname]";
-
"Usage: lppasswd [-g groupname] [username]\n lppasswd [-g groupname] -a [username]\n lppasswd [-g groupname] -x [username]" = "Usage: lppasswd [-g groupname] [username]\n lppasswd [-g groupname] -a [username]\n lppasswd [-g groupname] -x [username]";
-
"Usage: lpq [-P dest] [-U username] [-h hostname[:port]] [-l] [+interval]" = "Usage: lpq [-P dest] [-U username] [-h hostname[:port]] [-l] [+interval]";
-
"Usage: ppdc [options] filename.drv [ ... filenameN.drv ]" = "Usage: ppdc [options] filename.drv [ ... filenameN.drv ]";
-
"Usage: ppdhtml [options] filename.drv >filename.html" = "Usage: ppdhtml [options] filename.drv >filename.html";
-
"Usage: ppdi [options] filename.ppd [ ... filenameN.ppd ]" = "Usage: ppdi [options] filename.ppd [ ... filenameN.ppd ]";
-
"Usage: ppdmerge [options] filename.ppd [ ... filenameN.ppd ]" = "Usage: ppdmerge [options] filename.ppd [ ... filenameN.ppd ]";
-
"Usage: ppdpo [options] -o filename.po filename.drv [ ... filenameN.drv ]" = "Usage: ppdpo [options] -o filename.po filename.drv [ ... filenameN.drv ]";
-
"Usage: snmp [host-or-ip-address]" = "Usage: snmp [host-or-ip-address]";
-
"Value uses indefinite length" = "Value uses indefinite length";
-
"VarBind uses indefinite length" = "VarBind uses indefinite length";
-
"Version uses indefinite length" = "Version uses indefinite length";
-
"Waiting for job to complete." = "Waiting for job to complete.";
-
"Waiting for printer to become available." = "Waiting for printer to become available.";
-
"Waiting for printer to finish." = "Waiting for printer to finish.";
-
-"Warning, no Windows 2000 printer drivers are installed" = "Warning, no Windows 2000 printer drivers are installed";
-
+"Warning, no Windows 2000 printer drivers are installed." = "Warning, no Windows 2000 printer drivers are installed.";
"Web Interface is Disabled" = "Web Interface is Disabled";
-
"Yes" = "Yes";
-
"You must access this page using the URL <A HREF=\"https://%s:%d%s\">https://%s:%d%s</A>." = "You must access this page using the URL <A HREF=\"https://%s:%d%s\">https://%s:%d%s</A>.";
-
-"You4 Envelope" = "You4 Envelope";
-
"Your password must be at least 6 characters long, cannot contain your username, and must contain at least one letter and number." = "Your password must be at least 6 characters long, cannot contain your username, and must contain at least one letter and number.";
-
"ZPL Label Printer" = "ZPL Label Printer";
-
"Zebra" = "Zebra";
-
"aborted" = "aborted";
-
"canceled" = "canceled";
-
"completed" = "completed";
-
"convert: Use the -f option to specify a file to convert." = "convert: Use the -f option to specify a file to convert.";
-
"cups-deviced failed to execute." = "cups-deviced failed to execute.";
-
"cups-driverd failed to execute." = "cups-driverd failed to execute.";
-
"cupsaddsmb: No PPD file for printer \"%s\" - %s" = "cupsaddsmb: No PPD file for printer \"%s\" - %s";
-
"cupsctl: Cannot set Listen or Port directly." = "cupsctl: Cannot set Listen or Port directly.";
-
"cupsctl: Unable to connect to server: %s" = "cupsctl: Unable to connect to server: %s";
-
"cupsctl: Unknown option \"%s\"" = "cupsctl: Unknown option \"%s\"";
-
"cupsctl: Unknown option \"-%c\"" = "cupsctl: Unknown option \"-%c\"";
-
"cupsd: Expected config filename after \"-c\" option." = "cupsd: Expected config filename after \"-c\" option.";
-
"cupsd: Unable to get current directory." = "cupsd: Unable to get current directory.";
-
"cupsd: Unknown argument \"%s\" - aborting." = "cupsd: Unknown argument \"%s\" - aborting.";
-
"cupsd: Unknown option \"%c\" - aborting." = "cupsd: Unknown option \"%c\" - aborting.";
-
"cupsd: launchd(8) support not compiled in, running in normal mode." = "cupsd: launchd(8) support not compiled in, running in normal mode.";
-
"cupsfilter: Invalid document number %d." = "cupsfilter: Invalid document number %d.";
-
"cupsfilter: Invalid job ID %d." = "cupsfilter: Invalid job ID %d.";
-
"cupsfilter: Only one filename can be specified." = "cupsfilter: Only one filename can be specified.";
-
"cupsfilter: Unable to get job file - %s" = "cupsfilter: Unable to get job file - %s";
-
"cupstestppd: The -q option is incompatible with the -v option." = "cupstestppd: The -q option is incompatible with the -v option.";
-
"cupstestppd: The -v option is incompatible with the -q option." = "cupstestppd: The -v option is incompatible with the -q option.";
-
"device for %s/%s: %s" = "device for %s/%s: %s";
-
"device for %s: %s" = "device for %s: %s";
-
"error-index uses indefinite length" = "error-index uses indefinite length";
-
"error-status uses indefinite length" = "error-status uses indefinite length";
-
"held" = "held";
-
"help\t\tGet help on commands." = "help\t\tGet help on commands.";
-
"idle" = "idle";
-
"ipptool: \"-i\" and \"-n\" are incompatible with -X\"." = "ipptool: \"-i\" and \"-n\" are incompatible with -X\".";
-
"ipptool: \"-i\" is incompatible with \"-X\"." = "ipptool: \"-i\" is incompatible with \"-X\".";
-
"ipptool: \"-n\" is incompatible with \"-X\"." = "ipptool: \"-n\" is incompatible with \"-X\".";
-
"ipptool: Bad URI - %s." = "ipptool: Bad URI - %s.";
-
"ipptool: Bad version %s for \"-V\"." = "ipptool: Bad version %s for \"-V\".";
-
"ipptool: Invalid seconds for \"-i\"." = "ipptool: Invalid seconds for \"-i\".";
-
"ipptool: May only specify a single URI." = "ipptool: May only specify a single URI.";
-
"ipptool: Missing count for \"-n\"." = "ipptool: Missing count for \"-n\".";
-
"ipptool: Missing filename for \"-f\"." = "ipptool: Missing filename for \"-f\".";
-
"ipptool: Missing name=value for \"-d\"." = "ipptool: Missing name=value for \"-d\".";
-
"ipptool: Missing seconds for \"-i\"." = "ipptool: Missing seconds for \"-i\".";
-
"ipptool: Missing timeout for \"-T\"." = "ipptool: Missing timeout for \"-T\".";
-
"ipptool: Missing version for \"-V\"." = "ipptool: Missing version for \"-V\".";
-
"ipptool: URI required before test file." = "ipptool: URI required before test file.";
-
"ipptool: Unknown option \"-%c\"." = "ipptool: Unknown option \"-%c\".";
-
-"job-id %d not found." = "job-id %d not found.";
-
-"job-printer-uri attribute missing" = "job-printer-uri attribute missing";
-
+"job-printer-uri attribute missing." = "job-printer-uri attribute missing.";
"lpadmin: Class name can only contain printable characters." = "lpadmin: Class name can only contain printable characters.";
-
"lpadmin: Expected PPD after \"-P\" option." = "lpadmin: Expected PPD after \"-P\" option.";
-
"lpadmin: Expected allow/deny:userlist after \"-u\" option." = "lpadmin: Expected allow/deny:userlist after \"-u\" option.";
-
"lpadmin: Expected class after \"-r\" option." = "lpadmin: Expected class after \"-r\" option.";
-
"lpadmin: Expected class name after \"-c\" option." = "lpadmin: Expected class name after \"-c\" option.";
-
"lpadmin: Expected description after \"-D\" option." = "lpadmin: Expected description after \"-D\" option.";
-
"lpadmin: Expected device URI after \"-v\" option." = "lpadmin: Expected device URI after \"-v\" option.";
-
"lpadmin: Expected file type(s) after \"-I\" option." = "lpadmin: Expected file type(s) after \"-I\" option.";
-
"lpadmin: Expected hostname after \"-h\" option." = "lpadmin: Expected hostname after \"-h\" option.";
-
"lpadmin: Expected interface after \"-i\" option." = "lpadmin: Expected interface after \"-i\" option.";
-
"lpadmin: Expected location after \"-L\" option." = "lpadmin: Expected location after \"-L\" option.";
-
"lpadmin: Expected model after \"-m\" option." = "lpadmin: Expected model after \"-m\" option.";
-
"lpadmin: Expected name=value after \"-o\" option." = "lpadmin: Expected name=value after \"-o\" option.";
-
"lpadmin: Expected printer after \"-p\" option." = "lpadmin: Expected printer after \"-p\" option.";
-
"lpadmin: Expected printer name after \"-d\" option." = "lpadmin: Expected printer name after \"-d\" option.";
-
"lpadmin: Expected printer or class after \"-x\" option." = "lpadmin: Expected printer or class after \"-x\" option.";
-
"lpadmin: No member names were seen." = "lpadmin: No member names were seen.";
-
"lpadmin: Printer %s is already a member of class %s." = "lpadmin: Printer %s is already a member of class %s.";
-
"lpadmin: Printer %s is not a member of class %s." = "lpadmin: Printer %s is not a member of class %s.";
-
"lpadmin: Printer name can only contain printable characters." = "lpadmin: Printer name can only contain printable characters.";
-
"lpadmin: Unable to add a printer to the class:\n You must specify a printer name first." = "lpadmin: Unable to add a printer to the class:\n You must specify a printer name first.";
-
"lpadmin: Unable to connect to server: %s" = "lpadmin: Unable to connect to server: %s";
-
"lpadmin: Unable to create temporary file" = "lpadmin: Unable to create temporary file";
-
"lpadmin: Unable to open PPD file \"%s\" - %s" = "lpadmin: Unable to open PPD file \"%s\" - %s";
-
"lpadmin: Unable to remove a printer from the class:\n You must specify a printer name first." = "lpadmin: Unable to remove a printer from the class:\n You must specify a printer name first.";
-
"lpadmin: Unable to set the printer options:\n You must specify a printer name first." = "lpadmin: Unable to set the printer options:\n You must specify a printer name first.";
-
"lpadmin: Unknown allow/deny option \"%s\"." = "lpadmin: Unknown allow/deny option \"%s\".";
-
"lpadmin: Unknown argument \"%s\"." = "lpadmin: Unknown argument \"%s\".";
-
"lpadmin: Unknown option \"%c\"." = "lpadmin: Unknown option \"%c\".";
-
"lpadmin: Warning - content type list ignored." = "lpadmin: Warning - content type list ignored.";
-
"lpc> " = "lpc> ";
-
"lpinfo: Expected 1284 device ID string after \"--device-id\"." = "lpinfo: Expected 1284 device ID string after \"--device-id\".";
-
"lpinfo: Expected language after \"--language\"." = "lpinfo: Expected language after \"--language\".";
-
"lpinfo: Expected make and model after \"--make-and-model\"." = "lpinfo: Expected make and model after \"--make-and-model\".";
-
"lpinfo: Expected product string after \"--product\"." = "lpinfo: Expected product string after \"--product\".";
-
"lpinfo: Expected scheme list after \"--exclude-schemes\"." = "lpinfo: Expected scheme list after \"--exclude-schemes\".";
-
"lpinfo: Expected scheme list after \"--include-schemes\"." = "lpinfo: Expected scheme list after \"--include-schemes\".";
-
"lpinfo: Expected timeout after \"--timeout\"." = "lpinfo: Expected timeout after \"--timeout\".";
-
"lpinfo: Unknown argument \"%s\"." = "lpinfo: Unknown argument \"%s\".";
-
"lpinfo: Unknown option \"%c\"." = "lpinfo: Unknown option \"%c\".";
-
"lpinfo: Unknown option \"%s\"." = "lpinfo: Unknown option \"%s\".";
-
"lpmove: Unable to connect to server: %s" = "lpmove: Unable to connect to server: %s";
-
"lpmove: Unknown argument \"%s\"." = "lpmove: Unknown argument \"%s\".";
-
"lpmove: Unknown option \"%c\"." = "lpmove: Unknown option \"%c\".";
-
"lpoptions: No printers." = "lpoptions: No printers.";
-
"lpoptions: Unable to add printer or instance: %s" = "lpoptions: Unable to add printer or instance: %s";
-
"lpoptions: Unable to get PPD file for %s: %s" = "lpoptions: Unable to get PPD file for %s: %s";
-
"lpoptions: Unable to open PPD file for %s." = "lpoptions: Unable to open PPD file for %s.";
-
"lpoptions: Unknown printer or class." = "lpoptions: Unknown printer or class.";
-
"lppasswd: Only root can add or delete passwords." = "lppasswd: Only root can add or delete passwords.";
-
"lppasswd: Password file busy." = "lppasswd: Password file busy.";
-
"lppasswd: Password file not updated." = "lppasswd: Password file not updated.";
-
"lppasswd: Sorry, password doesn't match." = "lppasswd: Sorry, password doesn't match.";
-
"lppasswd: Sorry, password rejected." = "lppasswd: Sorry, password rejected.";
-
"lppasswd: Sorry, passwords don't match." = "lppasswd: Sorry, passwords don't match.";
-
"lppasswd: Unable to copy password string: %s" = "lppasswd: Unable to copy password string: %s";
-
"lppasswd: Unable to open password file: %s" = "lppasswd: Unable to open password file: %s";
-
"lppasswd: Unable to write to password file: %s" = "lppasswd: Unable to write to password file: %s";
-
"lppasswd: failed to backup old password file: %s" = "lppasswd: failed to backup old password file: %s";
-
"lppasswd: failed to rename password file: %s" = "lppasswd: failed to rename password file: %s";
-
"lppasswd: user \"%s\" and group \"%s\" do not exist." = "lppasswd: user \"%s\" and group \"%s\" do not exist.";
-
"lpstat: error - %s environment variable names non-existent destination \"%s\"." = "lpstat: error - %s environment variable names non-existent destination \"%s\".";
-
"members of class %s:" = "members of class %s:";
-
"no entries" = "no entries";
-
"no system default destination" = "no system default destination";
-
-"notify-events not specified" = "notify-events not specified";
-
-"notify-recipient-uri URI \"%s\" is already used" = "notify-recipient-uri URI \"%s\" is already used";
-
-"notify-recipient-uri URI \"%s\" uses unknown scheme" = "notify-recipient-uri URI \"%s\" uses unknown scheme";
-
-"notify-subscription-id %d no good" = "notify-subscription-id %d no good";
-
+"notify-events not specified." = "notify-events not specified.";
+"notify-recipient-uri URI \"%s\" is already used." = "notify-recipient-uri URI \"%s\" is already used.";
+"notify-recipient-uri URI \"%s\" uses unknown scheme." = "notify-recipient-uri URI \"%s\" uses unknown scheme.";
"pending" = "pending";
-
"ppdc: Adding include directory \"%s\"." = "ppdc: Adding include directory \"%s\".";
-
"ppdc: Adding/updating UI text from %s." = "ppdc: Adding/updating UI text from %s.";
-
"ppdc: Bad boolean value (%s) on line %d of %s." = "ppdc: Bad boolean value (%s) on line %d of %s.";
-
"ppdc: Bad font attribute: %s" = "ppdc: Bad font attribute: %s";
-
"ppdc: Bad resolution name \"%s\" on line %d of %s." = "ppdc: Bad resolution name \"%s\" on line %d of %s.";
-
"ppdc: Bad status keyword %s on line %d of %s." = "ppdc: Bad status keyword %s on line %d of %s.";
-
"ppdc: Bad variable substitution ($%c) on line %d of %s." = "ppdc: Bad variable substitution ($%c) on line %d of %s.";
-
"ppdc: Choice found on line %d of %s with no Option." = "ppdc: Choice found on line %d of %s with no Option.";
-
"ppdc: Duplicate #po for locale %s on line %d of %s." = "ppdc: Duplicate #po for locale %s on line %d of %s.";
-
"ppdc: Expected a filter definition on line %d of %s." = "ppdc: Expected a filter definition on line %d of %s.";
-
"ppdc: Expected a program name on line %d of %s." = "ppdc: Expected a program name on line %d of %s.";
-
"ppdc: Expected boolean value on line %d of %s." = "ppdc: Expected boolean value on line %d of %s.";
-
"ppdc: Expected charset after Font on line %d of %s." = "ppdc: Expected charset after Font on line %d of %s.";
-
"ppdc: Expected choice code on line %d of %s." = "ppdc: Expected choice code on line %d of %s.";
-
"ppdc: Expected choice name/text on line %d of %s." = "ppdc: Expected choice name/text on line %d of %s.";
-
"ppdc: Expected color order for ColorModel on line %d of %s." = "ppdc: Expected color order for ColorModel on line %d of %s.";
-
"ppdc: Expected colorspace for ColorModel on line %d of %s." = "ppdc: Expected colorspace for ColorModel on line %d of %s.";
-
"ppdc: Expected compression for ColorModel on line %d of %s." = "ppdc: Expected compression for ColorModel on line %d of %s.";
-
"ppdc: Expected constraints string for UIConstraints on line %d of %s." = "ppdc: Expected constraints string for UIConstraints on line %d of %s.";
-
"ppdc: Expected driver type keyword following DriverType on line %d of %s." = "ppdc: Expected driver type keyword following DriverType on line %d of %s.";
-
"ppdc: Expected duplex type after Duplex on line %d of %s." = "ppdc: Expected duplex type after Duplex on line %d of %s.";
-
"ppdc: Expected encoding after Font on line %d of %s." = "ppdc: Expected encoding after Font on line %d of %s.";
-
"ppdc: Expected filename after #po %s on line %d of %s." = "ppdc: Expected filename after #po %s on line %d of %s.";
-
"ppdc: Expected group name/text on line %d of %s." = "ppdc: Expected group name/text on line %d of %s.";
-
"ppdc: Expected include filename on line %d of %s." = "ppdc: Expected include filename on line %d of %s.";
-
"ppdc: Expected integer on line %d of %s." = "ppdc: Expected integer on line %d of %s.";
-
"ppdc: Expected locale after #po on line %d of %s." = "ppdc: Expected locale after #po on line %d of %s.";
-
"ppdc: Expected name after %s on line %d of %s." = "ppdc: Expected name after %s on line %d of %s.";
-
"ppdc: Expected name after FileName on line %d of %s." = "ppdc: Expected name after FileName on line %d of %s.";
-
"ppdc: Expected name after Font on line %d of %s." = "ppdc: Expected name after Font on line %d of %s.";
-
"ppdc: Expected name after Manufacturer on line %d of %s." = "ppdc: Expected name after Manufacturer on line %d of %s.";
-
"ppdc: Expected name after MediaSize on line %d of %s." = "ppdc: Expected name after MediaSize on line %d of %s.";
-
"ppdc: Expected name after ModelName on line %d of %s." = "ppdc: Expected name after ModelName on line %d of %s.";
-
"ppdc: Expected name after PCFileName on line %d of %s." = "ppdc: Expected name after PCFileName on line %d of %s.";
-
"ppdc: Expected name/text after %s on line %d of %s." = "ppdc: Expected name/text after %s on line %d of %s.";
-
"ppdc: Expected name/text after Installable on line %d of %s." = "ppdc: Expected name/text after Installable on line %d of %s.";
-
"ppdc: Expected name/text after Resolution on line %d of %s." = "ppdc: Expected name/text after Resolution on line %d of %s.";
-
"ppdc: Expected name/text combination for ColorModel on line %d of %s." = "ppdc: Expected name/text combination for ColorModel on line %d of %s.";
-
"ppdc: Expected option name/text on line %d of %s." = "ppdc: Expected option name/text on line %d of %s.";
-
"ppdc: Expected option section on line %d of %s." = "ppdc: Expected option section on line %d of %s.";
-
"ppdc: Expected option type on line %d of %s." = "ppdc: Expected option type on line %d of %s.";
-
"ppdc: Expected override field after Resolution on line %d of %s." = "ppdc: Expected override field after Resolution on line %d of %s.";
-
"ppdc: Expected quoted string on line %d of %s." = "ppdc: Expected quoted string on line %d of %s.";
-
"ppdc: Expected real number on line %d of %s." = "ppdc: Expected real number on line %d of %s.";
-
"ppdc: Expected resolution/mediatype following ColorProfile on line %d of %s." = "ppdc: Expected resolution/mediatype following ColorProfile on line %d of %s.";
-
"ppdc: Expected resolution/mediatype following SimpleColorProfile on line %d of %s." = "ppdc: Expected resolution/mediatype following SimpleColorProfile on line %d of %s.";
-
"ppdc: Expected selector after %s on line %d of %s." = "ppdc: Expected selector after %s on line %d of %s.";
-
"ppdc: Expected status after Font on line %d of %s." = "ppdc: Expected status after Font on line %d of %s.";
-
"ppdc: Expected string after Copyright on line %d of %s." = "ppdc: Expected string after Copyright on line %d of %s.";
-
"ppdc: Expected string after Version on line %d of %s." = "ppdc: Expected string after Version on line %d of %s.";
-
"ppdc: Expected two option names on line %d of %s." = "ppdc: Expected two option names on line %d of %s.";
-
"ppdc: Expected value after %s on line %d of %s." = "ppdc: Expected value after %s on line %d of %s.";
-
"ppdc: Expected version after Font on line %d of %s." = "ppdc: Expected version after Font on line %d of %s.";
-
"ppdc: Invalid #include/#po filename \"%s\"." = "ppdc: Invalid #include/#po filename \"%s\".";
-
"ppdc: Invalid cost for filter on line %d of %s." = "ppdc: Invalid cost for filter on line %d of %s.";
-
"ppdc: Invalid empty MIME type for filter on line %d of %s." = "ppdc: Invalid empty MIME type for filter on line %d of %s.";
-
"ppdc: Invalid empty program name for filter on line %d of %s." = "ppdc: Invalid empty program name for filter on line %d of %s.";
-
"ppdc: Invalid option section \"%s\" on line %d of %s." = "ppdc: Invalid option section \"%s\" on line %d of %s.";
-
"ppdc: Invalid option type \"%s\" on line %d of %s." = "ppdc: Invalid option type \"%s\" on line %d of %s.";
-
"ppdc: Loading driver information file \"%s\"." = "ppdc: Loading driver information file \"%s\".";
-
"ppdc: Loading messages for locale \"%s\"." = "ppdc: Loading messages for locale \"%s\".";
-
"ppdc: Loading messages from \"%s\"." = "ppdc: Loading messages from \"%s\".";
-
"ppdc: Missing #endif at end of \"%s\"." = "ppdc: Missing #endif at end of \"%s\".";
-
"ppdc: Missing #if on line %d of %s." = "ppdc: Missing #if on line %d of %s.";
-
"ppdc: Need a msgid line before any translation strings on line %d of %s." = "ppdc: Need a msgid line before any translation strings on line %d of %s.";
-
"ppdc: No message catalog provided for locale %s." = "ppdc: No message catalog provided for locale %s.";
-
"ppdc: Option %s defined in two different groups on line %d of %s." = "ppdc: Option %s defined in two different groups on line %d of %s.";
-
"ppdc: Option %s redefined with a different type on line %d of %s." = "ppdc: Option %s redefined with a different type on line %d of %s.";
-
"ppdc: Option constraint must *name on line %d of %s." = "ppdc: Option constraint must *name on line %d of %s.";
-
"ppdc: Too many nested #if's on line %d of %s." = "ppdc: Too many nested #if's on line %d of %s.";
-
"ppdc: Unable to create PPD file \"%s\" - %s." = "ppdc: Unable to create PPD file \"%s\" - %s.";
-
"ppdc: Unable to create output directory %s: %s" = "ppdc: Unable to create output directory %s: %s";
-
"ppdc: Unable to create output pipes: %s" = "ppdc: Unable to create output pipes: %s";
-
"ppdc: Unable to execute cupstestppd: %s" = "ppdc: Unable to execute cupstestppd: %s";
-
"ppdc: Unable to find #po file %s on line %d of %s." = "ppdc: Unable to find #po file %s on line %d of %s.";
-
"ppdc: Unable to find include file \"%s\" on line %d of %s." = "ppdc: Unable to find include file \"%s\" on line %d of %s.";
-
"ppdc: Unable to find localization for \"%s\" - %s" = "ppdc: Unable to find localization for \"%s\" - %s";
-
"ppdc: Unable to load localization file \"%s\" - %s" = "ppdc: Unable to load localization file \"%s\" - %s";
-
"ppdc: Unable to open %s: %s" = "ppdc: Unable to open %s: %s";
-
"ppdc: Undefined variable (%s) on line %d of %s." = "ppdc: Undefined variable (%s) on line %d of %s.";
-
"ppdc: Unexpected text on line %d of %s." = "ppdc: Unexpected text on line %d of %s.";
-
"ppdc: Unknown driver type %s on line %d of %s." = "ppdc: Unknown driver type %s on line %d of %s.";
-
"ppdc: Unknown duplex type \"%s\" on line %d of %s." = "ppdc: Unknown duplex type \"%s\" on line %d of %s.";
-
"ppdc: Unknown media size \"%s\" on line %d of %s." = "ppdc: Unknown media size \"%s\" on line %d of %s.";
-
"ppdc: Unknown message catalog format for \"%s\"." = "ppdc: Unknown message catalog format for \"%s\".";
-
"ppdc: Unknown token \"%s\" seen on line %d of %s." = "ppdc: Unknown token \"%s\" seen on line %d of %s.";
-
"ppdc: Unknown trailing characters in real number \"%s\" on line %d of %s." = "ppdc: Unknown trailing characters in real number \"%s\" on line %d of %s.";
-
"ppdc: Unterminated string starting with %c on line %d of %s." = "ppdc: Unterminated string starting with %c on line %d of %s.";
-
"ppdc: Warning - overlapping filename \"%s\"." = "ppdc: Warning - overlapping filename \"%s\".";
-
"ppdc: Writing %s." = "ppdc: Writing %s.";
-
"ppdc: Writing PPD files to directory \"%s\"." = "ppdc: Writing PPD files to directory \"%s\".";
-
"ppdmerge: Bad LanguageVersion \"%s\" in %s." = "ppdmerge: Bad LanguageVersion \"%s\" in %s.";
-
"ppdmerge: Ignoring PPD file %s." = "ppdmerge: Ignoring PPD file %s.";
-
"ppdmerge: Unable to backup %s to %s - %s" = "ppdmerge: Unable to backup %s to %s - %s";
-
"printer %s disabled since %s -" = "printer %s disabled since %s -";
-
"printer %s is idle. enabled since %s" = "printer %s is idle. enabled since %s";
-
"printer %s now printing %s-%d. enabled since %s" = "printer %s now printing %s-%d. enabled since %s";
-
"printer %s/%s disabled since %s -" = "printer %s/%s disabled since %s -";
-
"printer %s/%s is idle. enabled since %s" = "printer %s/%s is idle. enabled since %s";
-
"printer %s/%s now printing %s-%d. enabled since %s" = "printer %s/%s now printing %s-%d. enabled since %s";
-
"processing" = "processing";
-
"request id is %s-%d (%d file(s))" = "request id is %s-%d (%d file(s))";
-
"request-id uses indefinite length" = "request-id uses indefinite length";
-
"scheduler is not running" = "scheduler is not running";
-
"scheduler is running" = "scheduler is running";
-
"stat of %s failed: %s" = "stat of %s failed: %s";
-
"status\t\tShow status of daemon and queue." = "status\t\tShow status of daemon and queue.";
-
"stopped" = "stopped";
-
"system default destination: %s" = "system default destination: %s";
-
"system default destination: %s/%s" = "system default destination: %s/%s";
-
"unknown" = "unknown";
-
"untitled" = "untitled";
-
"variable-bindings uses indefinite length" = "variable-bindings uses indefinite length";
-
projects / thirdparty / cups.git / blobdiff