From 3c22bf7e70c5ed2e525220ef4453d029a403fa33 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 24 Dec 2013 15:15:31 -0500 Subject: [PATCH] Add ext4 man page and update and clean up the other man pages Signed-off-by: "Theodore Ts'o" --- debugfs/debugfs.8.in | 3 +- misc/Makefile.in | 22 +++- misc/dumpe2fs.8.in | 3 +- misc/ext4.5.in | 257 +++++++++++++++++++++++++++++++++++++++++++ misc/mke2fs.8.in | 207 ++-------------------------------- misc/tune2fs.8.in | 32 ++++-- 6 files changed, 310 insertions(+), 214 deletions(-) create mode 100644 misc/ext4.5.in diff --git a/debugfs/debugfs.8.in b/debugfs/debugfs.8.in index 0153fa8a6..ce70d81db 100644 --- a/debugfs/debugfs.8.in +++ b/debugfs/debugfs.8.in @@ -703,4 +703,5 @@ was written by Theodore Ts'o . .BR dumpe2fs (8), .BR tune2fs (8), .BR e2fsck (8), -.BR mke2fs (8) +.BR mke2fs (8), +.BR ext4 (5) diff --git a/misc/Makefile.in b/misc/Makefile.in index a798f961a..553c361c5 100644 --- a/misc/Makefile.in +++ b/misc/Makefile.in @@ -33,7 +33,7 @@ SMANPAGES= tune2fs.8 mklost+found.8 mke2fs.8 dumpe2fs.8 badblocks.8 \ e2label.8 $(FINDFS_MAN) $(BLKID_MAN) $(E2IMAGE_MAN) \ logsave.8 filefrag.8 e2freefrag.8 e2undo.8 \ $(UUIDD_MAN) $(E4DEFRAG_MAN) @FSCK_MAN@ -FMANPAGES= mke2fs.conf.5 +FMANPAGES= mke2fs.conf.5 ext4.5 UPROGS= chattr lsattr @UUID_CMT@ uuidgen UMANPAGES= chattr.1 lsattr.1 @UUID_CMT@ uuidgen.1 @@ -356,6 +356,10 @@ mke2fs.conf.5: $(DEP_SUBSTITUTE) $(srcdir)/mke2fs.conf.5.in $(E) " SUBST $@" $(Q) $(SUBSTITUTE_UPTIME) $(srcdir)/mke2fs.conf.5.in mke2fs.conf.5 +ext4.5: $(DEP_SUBSTITUTE) $(srcdir)/ext4.5.in + $(E) " SUBST $@" + $(Q) $(SUBSTITUTE_UPTIME) $(srcdir)/$@.in $@ + e2label.8: $(DEP_SUBSTITUTE) $(srcdir)/e2label.8.in $(E) " SUBST $@" $(Q) $(SUBSTITUTE_UPTIME) $(srcdir)/e2label.8.in e2label.8 @@ -489,6 +493,11 @@ install: all $(SMANPAGES) $(UMANPAGES) installdirs $(ES) " INSTALL_DATA $(man5dir)/$$i"; \ $(INSTALL_DATA) $$i $(DESTDIR)$(man5dir)/$$i; \ done + $(Q) for i in ext2 ext3; do \ + $(ES) " LINK $$i.5"; \ + (cd $(DESTDIR)$(man5dir); \ + $(LN) $(LINK_INSTALL_FLAGS) ext4.5 $$i.5); \ + done $(Q) if test -f $(DESTDIR)$(root_sysconfdir)/mke2fs.conf; then \ if cmp -s $(DESTDIR)$(root_sysconfdir)/mke2fs.conf \ mke2fs.conf; then \ @@ -551,7 +560,12 @@ uninstall: $(RM) -f $(DESTDIR)$(man8dir)/mkfs.ext2.8 \ $(DESTDIR)$(man8dir)/mkfs.ext3.8 \ $(DESTDIR)$(man8dir)/mkfs.ext4.8 \ - $(DESTDIR)$(man8dir)/mkfs.ext4dev.8 + $(DESTDIR)$(man8dir)/mkfs.ext4dev.8 \ + $(DESTDIR)$(man8dir)/fsck.ext2.8 \ + $(DESTDIR)$(man8dir)/fsck.ext3.8 \ + $(DESTDIR)$(man8dir)/fsck.ext4.8 \ + $(DESTDIR)$(man8dir)/fsck.ext4dev.8 + for i in $(UMANPAGES); do \ $(RM) -f $(DESTDIR)$(man1dir)/$$i; \ done @@ -561,6 +575,10 @@ uninstall: for i in $(FMANPAGES); do \ $(RM) -f $(DESTDIR)$(man5dir)/$$i; \ done + $(Q) for i in ext2 ext3; do \ + $(ES) " LINK $$i.5"; \ + $(RM) -f $(DESTDIR)$(man5dir)/$$i.5; \ + done if cmp -s mke2fs.conf $(DESTDIR)/$(root_sysconfdir)/mke2fs.conf; then \ $(RM) $(DESTDIR)/$(root_sysconfdir)/mke2fs.conf; \ fi diff --git a/misc/dumpe2fs.8.in b/misc/dumpe2fs.8.in index a49378919..befaf9482 100644 --- a/misc/dumpe2fs.8.in +++ b/misc/dumpe2fs.8.in @@ -82,5 +82,6 @@ http://e2fsprogs.sourceforge.net. .SH SEE ALSO .BR e2fsck (8), .BR mke2fs (8), -.BR tune2fs (8) +.BR tune2fs (8). +.BR ext4 (5) diff --git a/misc/ext4.5.in b/misc/ext4.5.in new file mode 100644 index 000000000..98494eca4 --- /dev/null +++ b/misc/ext4.5.in @@ -0,0 +1,257 @@ +.\" -*- nroff -*- +.\" Copyright 1993, 1994, 1995 by Theodore Ts'o. All Rights Reserved. +.\" This file may be copied under the terms of the GNU Public License. +.\" +.TH EXT4 5 "@E2FSPROGS_MONTH@ @E2FSPROGS_YEAR@" "E2fsprogs version @E2FSPROGS_VERSION@" +.SH NAME +ext2 \- the second extended file system +.br +ext2 \- the third extended file system +.br +ext4 \- the fourth extended file system +.SH DESCRIPTION +The second, third, and fourth extended file systems, or ext2, ext3, and +ext4 as they are commonly known, are Linux file systems that have +historically been the default file system for many Linux distributions. +They are general purpose file systems that have been designed for +extensibility and backwards compatibility. In particular, file systems +previously intended for use with the ext2 and ext3 file systems can be +mounted using the ext4 file system driver, and indeed in many modern +Linux distributions, the ext4 file system driver has been configured +handle mount requests for ext2 and ext3 file systems. +.SH FILE SYSTEM FEATURES +A file system formated for ext2, ext3, or ext4 can be have some +collection of the follow file system feature flags enabled. Some of +these features are not supported by all implementations of the ext2, +ext3, and ext4 file system drivers, depending on Linux kernel version in +use. On other operating systems, such as the GNU/HURD or FreeBSD, only +a very restrictive set of file system features may be supported in their +implementations of ext2. +.RS 1.2i +.TP +.B 64bit +.br +Enables the file system to be larger than 2^32 blocks. This feature is set +automatically, as needed, but it can be useful to specify this feature +explicitly if the file system might need to be resized larger than 2^32 +blocks, even if it was smaller than that threshold when it was +originally created. Note that some older kernels and older versions +of e2fsprogs will not support file systems with this ext4 feature enabled. +.TP +.B bigalloc +.br +This ext4 feature enables clustered block allocation, so that the unit of +allocation is a power of two number of blocks. That is, each bit in the +what had traditionally been known as the block allocation bitmap now +indicates whether a cluster is in use or not, where a cluster is by +default composed of 16 blocks. This feature can decrease the time +spent on doing block allocation and brings smaller fragmentation, especially +for large files. The size can be specified using the +.B \-C option. +.IP +.B Warning: +The bigalloc feature is still under development, and may not be fully +supported with your kernel or may have various bugs. Please see the web +page http://ext4.wiki.kernel.org/index.php/Bigalloc for details. +May clash with delayed allocation (see +.BR nodelalloc mount option). +.IP +This feature requires that the +.B extent +features be enabled. +.TP +.B dir_index +.br +Use hashed b-trees to speed up name lookups in large directories. This +feature is supported by ext3 and ext4 file systems, and is ignored by +ext2 file systems. +.TP +.B dir_nlink +.br +This ext4 feature allows more than 65000 subdirectories per directory. +.TP +.B extent +.br +This ext4 feature allows the mapping of logical block numbers for a +particular inode to physical blocks on the storage device to be stored +using an extent tree, which is a more efficient data structure than the +traditional indirect block scheme used by the ext2 and ext3 file +systems. The use of the extent tree decreases metadata block overhead, +improves file system performance, and decreases the needed to run +.BR e2fsck (8) +on the file system. +(Note: both +.B extent +and +.B extents +are accepted as valid names for this feature for +historical/backwards compatibility reasons.) +.TP +.B extra_isize +.br +This ext4 feature reserves a specific amount of space in each inode for +extended metadata such as nanosecond timestamps and file creation time, +even if the current kernel does not current need to reserve this much +space. Without this feature, the kernel will reserve the amount of +space for features currently it currently needs, and the rest may be +consumed by extended attributes. + +For this feature to be useful the inode size must be 256 bytes in size +or larger. +.TP +.B ext_attr +.br +This feature enables the use of extended attributes. This feature is +supported by ext2, ext3, and ext4. +.TP +.B filetype +.br +This feature enables the storage file type information in directory +entries. This feature is supported by ext2, ext3, and ext4. +.TP +.TP +.B flex_bg +.br +This ext4 feature allows the per-block group metadata (allocation +bitmaps +and inode tables) +to be placed anywhere on the storage media. In addition, +.B mke2fs +will place the per-block group metadata together starting at the first +block group of each "flex_bg group". The size of the flex_bg group +can be specified using the +.B \-G +option. +.TP +.B has_journal +.br +Create a journal to ensure filesystem consistency even across unclean +shutdowns. Setting the filesystem feature is equivalent to using the +.B \-j +option. This feature is supported by ext3 and ext4, and ignored by the +ext2 file system driver. +.TP +.B huge_file +.br +This ext4 feature allows files to be larger than 2 terabytes in size. +.TP +.B journal_dev +.br +This feature is enabled on the superblock found on an external journal +device. The block size for the external journal must be the same as the +file system which uses it. +.IP +The external journal device can be used by a file system by specifying +the +.B \-J +.BR device= +option to +.BR mke2fs (8) +or +.BR tune2fs(8). +.TP +.B large_file +.br +This feature flag is set automatically by modern kernels when a file +larger than 2 gigabytes is created. Very old kernels could not +handle large files, so this feature flag was used to prohibit those +kernels from mounting file systems that they could not understand. +.\" .TP +.\" .B metadata_csum +.\" .br +.\" This ext4 feature enables metadata checksumming. This feature stores +.\" checksums for all of the filesystem metadata (superblock, group +.\" descriptor blocks, inode and block bitmaps, directories, and +.\" extent tree blocks). The checksum algorithm used for the metadata +.\" blocks is different than the one used for group descriptors with the +.\" .B uninit_bg +.\" feature, these two features are incompatible and +.\" .B metadata_csum +.\" will be used preferentially instead of +.\" .BR uninit_bg . +.\" .br +.\" .B Future feature, available in e2fsprogs 1.43-WIP +.TP +.B meta_bg +.br +This ext4 feature allows file systems to be resized on-line without explicitly +needing to reserve space for growth in the size of the block group +descriptors. This scheme is also used to resize file systems which are +larger than 2^32 blocks. It is not recommended that this feature be set +when a file system is created, since this alternate method of storing +the block group descriptor will slow down the time needed to mount the +file system, and newer kernels can automatically set this feature as +necessary when doing an online resize and no more reserved space is +available in the resize inode. +.TP +.B mmp +.br +This ext4 feature provides multiple mount protection (MMP). MMP helps to +protect the filesystem from being multiply mounted and is useful in +shared storage environments. +@QUOTA_MAN_COMMENT@.TP +@QUOTA_MAN_COMMENT@.B quota +@QUOTA_MAN_COMMENT@.br +@QUOTA_MAN_COMMENT@Create quota inodes (inode #3 for userquota and inode +@QUOTA_MAN_COMMENT@#4 for group quota) and set them in the superblock. +@QUOTA_MAN_COMMENT@With this feature, the quotas will be enabled +@QUOTA_MAN_COMMENT@automatically when the filesystem is mounted. +@QUOTA_MAN_COMMENT@.IP +@QUOTA_MAN_COMMENT@Causes the quota files (i.e., user.quota and +@QUOTA_MAN_COMMENT@group.quota which existed +@QUOTA_MAN_COMMENT@in the older quota design) to be hidden inodes. +@QUOTA_MAN_COMMENT@.IP +@QUOTA_MAN_COMMENT@.B Warning: +@QUOTA_MAN_COMMENT@The quota feature is still under development, +@QUOTA_MAN_COMMENT@and may not be fully supported with your kernel +@QUOTA_MAN_COMMENT@or may have various bugs. Please +@QUOTA_MAN_COMMENT@see https://ext4.wiki.kernel.org/index.php/Quota +@QUOTA_MAN_COMMENT@for more details. +.TP +.B resize_inode +.br +This file system feature indicates that space has been reserved so +the block group descriptor table can be extended by the file system is +resized while the file system is mounted. The online resize operation +is carried out by the kernel, triggered, by +.BR resize2fs (8). +By default +.B mke2fs +will attempt to reserve enough space so that the +filesystem may grow to 1024 times its initial size. This can be changed +using the +.B resize +extended option. +.IP +This feature requires that the +.B sparse_super +feature be enabled. +.TP +.B sparse_super +.br +This file system feature is set on all modern ext2, ext3, and ext4 file +system. It indicates that backup copies of the superblock and block +group descriptors be present only on a few block groups, and not all of +them. +.TP +.B uninit_bg +.br +This ext4 file system feature indicates that the block group descriptors +will be protected using checksums, making it safe for +.BR mke2fs (8) +to create a file system without initializing all of the block groups. +The kernel will keep a high watermark of unused inodes, and initialize +inode tables and block lazily. This feature speeds up the time to check +the file system using +.BR e2fsck (8), +and it also speeds up the time required for +.BR mke2fs (8) +to create the file system. +.RE +.SH SEE ALSO +.BR mke2fs (8), +.BR mke2fs.conf (5), +.BR e2fsck (8), +.BR dumpe2fs (8), +.BR tune2fs (8), +.BR debugfs (8) diff --git a/misc/mke2fs.8.in b/misc/mke2fs.8.in index 4486014a6..c17862893 100644 --- a/misc/mke2fs.8.in +++ b/misc/mke2fs.8.in @@ -294,7 +294,7 @@ Do not attempt to discard blocks at mkfs time. @QUOTA_MAN_COMMENT@.TP @QUOTA_MAN_COMMENT@.BI quotatype @QUOTA_MAN_COMMENT@Specify which quota type ('usr' or 'grp') is to be -@QUOTA_MAN_COMMENT@initialized. This option has effect only if +@QUOTA_MAN_COMMENT@initialized. This option has effect only if the @QUOTA_MAN_COMMENT@.B quota @QUOTA_MAN_COMMENT@feature is set. Without this extended option, the default @QUOTA_MAN_COMMENT@behavior is to initialize both user and group quotas. @@ -533,206 +533,12 @@ section of the configuration file. The filesystem feature set is comprised of a list of features, separated by commas, that are to be enabled. To disable a feature, simply prefix the feature name with a caret ('^') or a minus ('-') character. -Features with dependents will not be removed successfully. +Features with dependencies will not be removed successfully. The pseudo-filesystem feature "none" will clear all filesystem features. -.RS 1.2i -.TP -.B 64bit -.br -Enables the file system to be larger than 2^32 blocks. This feature is set -automatically, as needed, but it can be useful to specify this feature -explicitly if the file system might need to be resized larger than 2^32 -blocks, even if it was smaller than that threshold when it was -originally created. Note that some older kernels and older versions -of e2fsprogs will not support file systems with this feature enabled. -.TP -.B bigalloc -.br -This feature enables clustered block allocation, so that the unit of -allocation is a power of two number of blocks. That is, each bit in the -what had traditionally been known as the block allocation bitmap now -indicates whether a cluster is in use or not, where a cluster is by -default composed of 16 blocks. This feature can decrease the time -spent on doing block allocation and brings smaller fragmentation, especially -for large files. The size can be specified using the -.B \-C option. -.IP -.B Warning: -The bigalloc feature is still under development, and may not be fully -supported with your kernel or may have various bugs. Please see the web -page http://ext4.wiki.kernel.org/index.php/Bigalloc for details. -May clash with delayed allocation (see -.BR nodelalloc mount option). -.IP -This feature requires that the -.B extent -features be enabled. -.TP -.B dir_index -.br -Use hashed b-trees to speed up name lookups in large directories. -.TP -.B dir_nlink -.br -Allow more than 65000 subdirectories per directory. -.TP -.B extent -.br -Instead of using the indirect block scheme for storing the location of -data blocks in an inode, use extents instead. This is a much more -efficient encoding which speeds up filesystem access, especially for -large files. (Note: both -.B extent -and -.B extents -are accepted as valid names for this feature for -historical/backwards compatibility reasons.) -.TP -.B extra_isize -.br -This feature reserves a specific amount of space in each inode for -extended metadata such as nanosecond timestamps and file creation time, -even if the current kernel does not current need to reserve this much -space. Without this feature, the kernel will reserve the amount of -space for features currently it currently needs, and the rest may be -consumed by extended attributes. - -For this feature to be useful the inode size must be 256 bytes in size -or larger. -.TP -.B ext_attr -.br -This feature enables the use of extended attributes. -.TP -.B filetype -.br -This feature enables the storage file type information in directory -entries. It is normally enabled by default for all file system types. -.TP -.B flex_bg -.br -Allow the per-block group metadata (allocation bitmaps and inode tables) -to be placed anywhere on the storage media. In addition, -.B mke2fs -will place the per-block group metadata together starting at the first -block group of each "flex_bg group". The size of the flex_bg group -can be specified using the -.B \-G -option. -.TP -.B has_journal -.br -Create a journal to ensure filesystem consistency even across unclean -shutdowns. Setting the filesystem feature is equivalent to using the -.B \-j -option. .TP -.B huge_file -.br -Allows files larger than 2TiB in size. -.TP -.B journal_dev -.br -Creates an external ext3 journal on the given device -instead of a regular ext2 filesystem. -Note that -.I external-journal -must be created with the same -block size as the filesystems that will be using it. -.IP -Once ready, use -.BR mke2fs (8) -or -.BR tune2fs(8) -with -.B \-J -.BR device= -to direct a filesystem to the journaling device (see journal-options). -.TP -.B large_file -.br -Filesystem can contain files that are greater than 2GiB. (Modern kernels -set this feature automatically when a file > 2GiB is created.) -.\" .TP -.\" .B metadata_csum -.\" .br -.\" Filesystem supports metadata checksumming. This feature stores -.\" checksums for all of the filesystem metadata (superblock, group -.\" descriptor blocks, inode and block bitmaps, directories, and -.\" extent tree blocks). The checksum algorithm used for the metadata -.\" blocks is different than the one used for group descriptors with the -.\" .B uninit_bg -.\" feature, these two features are incompatible and -.\" .B metadata_csum -.\" will be used preferentially instead of -.\" .BR uninit_bg . -.\" .br -.\" .B Future feature, available in e2fsprogs 1.43-WIP -.TP -.B meta_bg -.br -This feature allows file systems to be resized on-line without explicitly -needing to reserve space for growth in the size of the block group -descriptors. This scheme is also used to resize file systems which are -larger than 2^32 blocks. It is not recommended that this feature be set -when a file system is created, since this alternate method of storing -the block group descriptor will slow down the time needed to mount the -file system, and newer kernels can automatically set this feature as -necessary when doing an online resize and no more reserved space is -available in the resize inode. -.TP -.B mmp -.br -Multiple mount protection (MMP) feature. MMP helps to -protect the filesystem from being multiply mounted and is useful in -shared storage environments. -@QUOTA_MAN_COMMENT@.TP -@QUOTA_MAN_COMMENT@.B quota -@QUOTA_MAN_COMMENT@.br -@QUOTA_MAN_COMMENT@Create quota inodes (inode #3 for userquota and inode -@QUOTA_MAN_COMMENT@#4 for group quota) and set them in the superblock. -@QUOTA_MAN_COMMENT@With this feature, the quotas will be enabled -@QUOTA_MAN_COMMENT@automatically when the filesystem is mounted. -@QUOTA_MAN_COMMENT@.IP -@QUOTA_MAN_COMMENT@Causes the quota files (i.e., user.quota and -@QUOTA_MAN_COMMENT@group.quota which existed -@QUOTA_MAN_COMMENT@in the older quota design) to be hidden inodes. -@QUOTA_MAN_COMMENT@.IP -@QUOTA_MAN_COMMENT@.B Not defined by default, -@QUOTA_MAN_COMMENT@see https://ext4.wiki.kernel.org/index.php/Quota -.TP -.B resize_inode -.br -Reserve space so the block group descriptor table may grow in the future. -Useful for online resizing using -.BR resize2fs . -By default -.B mke2fs -will attempt to reserve enough space so that the -filesystem may grow to 1024 times its initial size. This can be changed -using the -.B resize -extended option. -.IP - This feature requires that the -.B sparse_super -feature be enabled. -.TP -.B sparse_super -.br -Create a filesystem with fewer superblock backup copies -(saves space on large filesystems). This feature is normally enabled by -default for all file systems. -.TP -.B uninit_bg -.br -Create a filesystem without initializing all of the block groups. This -feature allows the kernel to initialize bitmaps and inode tables -and keep a high watermark for the unused inodes in a filesystem, to reduce -.BR e2fsck (8) -time. The result is that it can speed up filesystem creation time noticeably -(if lazy_itable_init is enabled). -.RE +For more information about the features which can be set, please see +the manual page +.BR ext4 (5). .TP .B \-q Quiet execution. Useful if @@ -878,4 +684,5 @@ http://e2fsprogs.sourceforge.net. .BR badblocks (8), .BR dumpe2fs (8), .BR e2fsck (8), -.BR tune2fs (8) +.BR tune2fs (8), +.BR ext4 (5) diff --git a/misc/tune2fs.8.in b/misc/tune2fs.8.in index 55c6dd9fe..da21080a8 100644 --- a/misc/tune2fs.8.in +++ b/misc/tune2fs.8.in @@ -501,18 +501,26 @@ More than one filesystem feature can be cleared or set by separating features with commas. Filesystem features prefixed with a caret character ('^') will be cleared in the filesystem's superblock; filesystem features without a prefix character or prefixed with a plus -character ('+') will be added to the filesystem. +character ('+') will be added to the filesystem. For a detailed +description of the file system features, please see the man page +.BR ext4 (5). .IP The following filesystem features can be set or cleared using .BR tune2fs : .RS 1.2i .TP .B dir_index -Use hashed b-trees to speed up lookups in large directories. +Use hashed b-trees to speed up lookups for large directories. .TP .B dir_nlink Allow more than 65000 subdirectories per directory. .TP +.B extent +Enable the use of extent trees to store the location of data blocks in inodes. +.TP +.B extra_isize +Enable the extended inode fields used by ext4. +.TP .B filetype Store file type information in directory entries. .TP @@ -531,9 +539,11 @@ Setting the filesystem feature is equivalent to using the .B \-j option. .TP +.B huge_file +Support files larger than 2 terabytes in size. +.TP .B large_file -Filesystem can contain files that are greater than 2GB. (Modern kernels -set this feature automatically when a file > 2GB is created.) +Filesystem can contain files that are greater than 2GB. .TP .B resize_inode Reserve space so the block group descriptor table may grow in the @@ -542,16 +552,17 @@ future. only supports clearing this filesystem feature. .TP .B mmp -Enable or disable multiple mount protection (MMP) feature. MMP helps to -protect the filesystem from being multiply mounted and is useful in -shared storage environments. +Enable or disable multiple mount protection (MMP) feature. +@QUOTA_MAN_COMMENT@.TP +@QUOTA_MAN_COMMENT@.B quota +@QUOTA_MAN_COMMENT@Enable internal file system quota inodes. .TP .B sparse_super Limit the number of backup superblocks to save space on large filesystems. .TP .B uninit_bg -Allow the kernel to initialize bitmaps and inode tables and keep a high -watermark for the unused inodes in a filesystem, to reduce +Allow the kernel to initialize bitmaps and inode tables lazily, and to +keep a high watermark for the unused inodes in a filesystem, to reduce .BR e2fsck (8) time. This first e2fsck run after enabling this feature will take the full time, but subsequent e2fsck runs will take only a fraction of the @@ -681,4 +692,5 @@ http://e2fsprogs.sourceforge.net. .BR debugfs (8), .BR dumpe2fs (8), .BR e2fsck (8), -.BR mke2fs (8) +.BR mke2fs (8), +.BR ext4 (5) -- 2.39.2