Jakub Jelinek [Tue, 25 Apr 2023 12:20:51 +0000 (14:20 +0200)]
powerpc: Fix up *branch_anddi3_dot for -m32 -mpowerpc64 [PR109566]
The following testcase reduced from newlib ICEs on powerpc-linux,
with -O2 -m32 -mpowerpc64 since r12-6433 PR102239 optimization was
added and on the original testcase since some ranger improvements in
GCC 13 made it no longer latent on newlib.
The problem is that the *branch_anddi3_dot define_insn_and_split
relies on the *rotldi3_mask_dot define_insn_and_split being recognized
during splitting. The rs6000_is_valid_rotate_dot_mask function checks whether
the mask is a CONST_INT which is a valid mask, but *rotl<mode>3_mask_dot in
addition to checking that it is a valid mask also has
(<MODE>mode == Pmode || UINTVAL (operands[3]) <= 0x7fffffff)
test in the condition. For TARGET_64BIT that doesn't add any further
requirements, but for !TARGET_64BIT && TARGET_POWERPC64 if the AND
second operand is larger than INT_MAX it will not be recognized.
The rs6000_is_valid_rotate_dot_mask function is used solely in one spot,
condition of *branch_anddi3_dot, so the following patch adjusts it
to check for that as well.
2023-04-25 Jakub Jelinek <jakub@redhat.com>
PR target/109566
* config/rs6000/rs6000.cc (rs6000_is_valid_rotate_dot_mask): For
!TARGET_64BIT, don't return true if UINTVAL (mask) << (63 - nb)
is larger than signed int maximum.
install.texi needs some updates for GCC 13 and trunk:
* We used a mixture of Solaris 2 and Solaris references. Since Solaris
1/SunOS 4 is ancient history by now, consistently use Solaris
everywhere. Likewise, explicit references to Solaris 11 can go in
many places since Solaris 11.3 and 11.4 is all GCC supports.
* Some caveats apply to both Solaris/SPARC and x86, like the difference
between as and gas.
* Some specifics are obsolete, like the /usr/ccs/bin path whose contents
was merged into /usr/bin in Solaris 11.0 already. Likewise, /bin/sh
is ksh93 since Solaris 11.0, so there's no need to explicitly use
/bin/ksh.
* I've removed the reference to OpenCSW: there's barely a need for external
sites to get additional packages. OpenCSW is mostly unmaintained these
days and has been found to be rather harmful then helping.
* The section on assembler and linker to use was partially duplicated.
Better keep the info in one place.
* GNAT is bundled in recent Solaris 11.4 updates, so recommend that.
Tested on i386-pc-solaris2.11 with make doc/gccinstall.{info,pdf} and
inspection of the latter.
Jakub Jelinek [Sat, 22 Apr 2023 08:24:29 +0000 (10:24 +0200)]
match.pd: Fix fneg/fadd optimization [PR109583]
The following testcase ICEs on x86, foo function since my r14-22
improvement, but bar already since r13-4122. The problem is the same,
in the if expression related_vector_mode is called and that starts with
gcc_assert (VECTOR_MODE_P (vector_mode));
but nothing in the fneg/fadd match.pd pattern actually checks if the
VEC_PERM type has VECTOR_MODE_P (vec_mode). In this case it has BLKmode
and so it ICEs.
The following patch makes sure we don't ICE on it.
2023-04-22 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/109583
* match.pd (fneg/fadd simplify): Don't call related_vector_mode
if vec_mode is not VECTOR_MODE_P.
Andrew MacLeod [Thu, 20 Apr 2023 17:10:40 +0000 (13:10 -0400)]
Do not ignore UNDEFINED ranges when determining PHI equivalences.
Do not ignore UNDEFINED name arguments when registering two-way equivalences
from PHIs.
PR tree-optimization/109564
gcc/
* gimple-range-fold.cc (fold_using_range::range_of_phi): Do no ignore
UNDEFINED range names when deciding if all PHI arguments are the same,
Patrick Palka [Wed, 19 Apr 2023 17:07:46 +0000 (13:07 -0400)]
c++: bad ggc_free in try_class_unification [PR109556]
Aside from correcting how try_class_unification copies multi-dimensional
'targs', r13-377-g3e948d645bc908 also made it ggc_free this copy as an
optimization. But this is wrong since the call to unify within might've
captured the args in persistent memory such as the satisfaction cache
(as part of constrained auto deduction).
PR c++/109556
gcc/cp/ChangeLog:
* pt.cc (try_class_unification): Don't ggc_free the copy of
'targs'.
gcc/testsuite/ChangeLog:
* g++.dg/cpp2a/concepts-placeholder13.C: New test.
Jakub Jelinek [Wed, 19 Apr 2023 08:01:04 +0000 (10:01 +0200)]
testsuite: Fix up pr109524.C for -std=c++23 [PR109524]
This testcase was reduced such that it isn't valid C++23, so with my
usual testing with GXX_TESTSUITE_STDS=98,11,14,17,20,2b it fails:
FAIL: g++.dg/pr109524.C -std=gnu++2b (test for excess errors)
.../gcc/testsuite/g++.dg/pr109524.C: In function 'nn hh(nn)':
.../gcc/testsuite/g++.dg/pr109524.C:35:12: error: cannot bind non-const lvalue reference of type 'nn&' to an rvalue of type 'nn'
.../gcc/testsuite/g++.dg/pr109524.C:17:6: note: initializing argument 1 of 'nn::nn(nn&)'
The following patch fixes that and I've verified it doesn't change
anything on what the test was testing, it still ICEs in r13-7198 and
passes in r13-7203, now in all language modes (except for 98 where
it is intentionally UNSUPPORTED).
2023-04-19 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/109524
* g++.dg/pr109524.C (nn::nn): Change argument type from nn & to
const nn &.
The RVV test harness currently sets the ISA according to the target
tuple, but doesn't also set the ABI. This just sets the ABI to match
the ISA, though we should really also be respecting the user's specific
ISA to test.
gcc/testsuite/ChangeLog:
* gcc.target/riscv/rvv/rvv.exp (gcc_mabi): New variable.
The test case that was added is rv64i-specific, as there's better ways
to generate this code on rv32i (where the long/int cast is a NOP) and on
rv64i_zba (where we have word shifts). This renames the original test
case and adds two more for those targets.
gcc/testsuite/ChangeLog:
PR target/106602
* gcc.target/riscv/pr106602.c: Moved to...
* gcc.target/riscv/pr106602-rv64i.c: ...here.
* gcc.target/riscv/pr106602-rv32i.c: New test.
* gcc.target/riscv/pr106602-rv64i_zba.c: New test.
Jonathan Wakely [Tue, 18 Apr 2023 16:22:40 +0000 (17:22 +0100)]
libstdc++: Fix preprocessor condition in linker script [PR108969]
The linker script is preprocessed with $(top_builddir)/config.h not the
include/$target/bits/c++config.h version, which means that configure
macros do not have the _GLIBCXX_ prefix yet.
The _GLIBCXX_SYMVER_GNU and _GLIBCXX_SHARED checks are redundant,
because the gnu.ver file is only used for _GLIBCXX_SYMVER_GNU and the
linker script is only used for the shared library. Remove those.
Jonathan Wakely [Tue, 18 Apr 2023 13:37:38 +0000 (14:37 +0100)]
libstdc++: Export global iostreams with GLIBCXX_3.4.31 symver [PR108969]
Since GCC 13 the global iostream objects are only initialized once in
libstdc++, and not by a std::ios::Init object in every translation unit
that includes <iostream>. To avoid using uninitialized streams defined
in an older libstdc++.so, translation units using the global iostreams
should depend on the GLIBCXX_3.4.31 symver.
Define std::cin as std::__io::cin and then export it as
std::cin@@GLIBCXX_3.4.31 so that references to std::cin bind to the new
symver. Also export it as @GLIBCXX_3.4 for backwards compatibility
libstdc++-v3/ChangeLog:
PR libstdc++/108969
* src/Makefile.am: Move globals_io.cc to here.
* src/Makefile.in: Regenerate.
* src/c++98/Makefile.am: Remove globals_io.cc from here.
* src/c++98/Makefile.in: Regenerate.
* src/c++98/globals_io.cc [_GLIBCXX_SYMVER_GNU] (cin): Adjust
symbol name and then export with GLIBCXX_3.4.31 symver.
(cout, cerr, clog, wcin, wcout, wcerr, wclog): Likewise.
* config/abi/post/aarch64-linux-gnu/baseline_symbols.txt:
Regenerate.
* config/abi/post/i486-linux-gnu/baseline_symbols.txt:
Regenerate.
* config/abi/post/m68k-linux-gnu/baseline_symbols.txt:
Regenerate.
* config/abi/post/powerpc64-linux-gnu/baseline_symbols.txt:
Regenerate.
* config/abi/post/riscv64-linux-gnu/baseline_symbols.txt:
Regenerate.
* config/abi/post/x86_64-linux-gnu/32/baseline_symbols.txt:
Regenerate.
* config/abi/post/s390x-linux-gnu/baseline_symbols.txt:
Regenerate.
* config/abi/post/x86_64-linux-gnu/baseline_symbols.txt:
Regenerate.
* config/abi/pre/gnu.ver: Add iostream objects to new symver.
Kito Cheng [Tue, 18 Apr 2023 10:07:06 +0000 (18:07 +0800)]
Docs: Add doc for RISC-V vector intrinsics
Document which version of RISC-V vector intrinsics has implemented in
GCC.
gcc/ChangeLog:
* doc/extend.texi (Target Builtins): Add RISC-V Vector
Intrinsics.
(RISC-V Vector Intrinsics): Document GCC implemented which
version of RISC-V vector intrinsics and its reference.
Richard Biener [Tue, 18 Apr 2023 09:49:48 +0000 (11:49 +0200)]
tree-optimization/109539 - restrict PHI handling in access diagnostics
Access diagnostics visits the SSA def-use chains to diagnose things like
dangling pointer uses. When that runs into PHIs it tries to prove
all incoming pointers of which one is the currently visited use are
related to decide whether to keep looking for the PHI def uses.
That turns out to be overly optimistic and thus costly. The following
scraps the existing handling for simply requiring that we eventually
visit all incoming pointers of the PHI during the def-use chain
analysis and only then process uses of the PHI def.
Note this handles backedges of natural loops optimistically, diagnosing
the first iteration. There's gcc.dg/Wuse-after-free-2.c containing
a testcase requiring this.
PR tree-optimization/109539
* gimple-ssa-warn-access.cc (pass_waccess::check_pointer_uses):
Re-implement pointer relatedness for PHIs.
Patrick Palka [Tue, 18 Apr 2023 11:21:13 +0000 (07:21 -0400)]
libstdc++: Implement range_adaptor_closure from P2387R3 [PR108827]
PR libstdc++/108827
libstdc++-v3/ChangeLog:
* include/bits/ranges_cmp.h (__cpp_lib_ranges): Bump value
for C++23.
* include/std/ranges (range_adaptor_closure): Define for C++23.
* include/std/version (__cpp_lib_ranges): Bump value for
C++23.
* testsuite/std/ranges/version_c++23.cc: Bump expected value
of __cpp_lib_ranges.
* testsuite/std/ranges/range_adaptor_closure.cc: New test.
Jakub Jelinek [Tue, 18 Apr 2023 10:18:13 +0000 (12:18 +0200)]
rust: Disable --enable-languages=rust and silently exclude it from --enable-languages=all for GCC 13
As discussed on IRC, gccrs can't compile the standard libraries yet
and requires annoying -frust-incomplete-and-experimental-compiler-do-not-use
option to compile anything.
As such it is better to disable this at least for GCC 13.1, we'd keep
it allowed on the trunk where hopefully support to compile at least
some standard libraries will land soon and eventually a borrow checker.
If enough Rust support is backported from trunk to 13 branch before
13.2, we could revert this change then.
Tested on x86_64-linux with --enable-languages=c,c++,rust and
--enable-languages=c,c++,all , ok for 13 branch?
2023-04-18 Jakub Jelinek <jakub@redhat.com>
* configure.ac: For --enable-languages= mentioning explicitly
rust emit an error, if included in all etc., silently disable
rust.
* configure: Regenerated.
libsanitizer, darwin: Unsupport Darwin >= 22 for now.
The mechanism for location dyld has altered from Darwin22 since dyld is now
in the shared cache. The implemented mechanism for walking the cache uses
Apple Blocks which GCC does not yet support, and the fallback to the original
mechanism does not work there.
Until a suitable work-around can be found, unsupport Darwin22+.
Patrick Palka [Mon, 17 Apr 2023 22:52:07 +0000 (18:52 -0400)]
c++: bound ttp level lowering [PR109531]
Here when level lowering the bound ttp TT<typename T::type> via the
substitution T=C, we're neglecting to canonicalize (and thereby strip
of simple typedefs) the substituted template arguments {A<int>} before
determining the new canonical type via hash table lookup. This leads to
a hash mismatch ICE for the two equivalent types TT<int> and TT<A<int>>
since iterative_hash_template_arg assumes type arguments are already
canonicalized.
We can fix this by canonicalizing or coercing the substituted arguments
directly, but seeing as creation and ordinary substitution of bound ttps
both go through lookup_template_class, which in turn performs the desired
coercion/canonicalization, it seems preferable to make this code path go
through lookup_template_class as well.
PR c++/109531
gcc/cp/ChangeLog:
* pt.cc (tsubst) <case BOUND_TEMPLATE_TEMPLATE_PARM>:
In the level-lowering case just use lookup_template_class
to rebuild the bound ttp.
gcc/testsuite/ChangeLog:
* g++.dg/template/canon-type-20.C: New test.
* g++.dg/template/ttp36.C: New test.
Martin Jambor [Mon, 17 Apr 2023 10:59:51 +0000 (12:59 +0200)]
ipa: Fix double reference-count decrements for the same edge (PR 107769, PR 109318)
It turns out that since addition of the code that can identify globals
which are only read from, the code that keeps track of the references
can decrement their count for the same calls, once during IPA-CP and
then again during inlining. Fixed by adding a special flag to the
pass-through variant and simply wiping out the reference to the
refdesc structure from the constant ones.
Moreover, during debugging of the issue I have discovered that the
code removing references could remove a reference associated with the
same statement but of a wrong type. In all cases it wanted to remove
an IPA_REF_ADDR reference so removing a lesser one instead should do
no harm in practice, but we should try to be consistent and so this
patch extends symtab_node::find_reference so that it searches for a
reference of a given type only.
gcc/ChangeLog:
2023-04-14 Martin Jambor <mjambor@suse.cz>
PR ipa/107769
PR ipa/109318
* cgraph.h (symtab_node::find_reference): Add parameter use_type.
* ipa-prop.h (ipa_pass_through_data): New flag refdesc_decremented.
(ipa_zap_jf_refdesc): New function.
(ipa_get_jf_pass_through_refdesc_decremented): Likewise.
(ipa_set_jf_pass_through_refdesc_decremented): Likewise.
* ipa-cp.cc (ipcp_discover_new_direct_edges): Provide a value for
the new parameter of find_reference.
(adjust_references_in_caller): Likewise. Make sure the constant jump
function is not used to decrement a refdec counter again. Only
decrement refdesc counters when the pass_through jump function allows
it. Added a detailed dump when decrementing refdesc counters.
* ipa-prop.cc (ipa_print_node_jump_functions_for_edge): Dump new flag.
(ipa_set_jf_simple_pass_through): Initialize the new flag.
(ipa_set_jf_unary_pass_through): Likewise.
(ipa_set_jf_arith_pass_through): Likewise.
(remove_described_reference): Provide a value for the new parameter of
find_reference.
(update_jump_functions_after_inlining): Zap refdesc of new jfunc if
the previous pass_through had a flag mandating that we do so.
(propagate_controlled_uses): Likewise. Only decrement refdesc
counters when the pass_through jump function allows it.
(ipa_edge_args_sum_t::duplicate): Provide a value for the new
parameter of find_reference.
(ipa_write_jump_function): Assert the new flag does not have to be
streamed.
* symtab.cc (symtab_node::find_reference): Add parameter use_type, use
it in searching.
Philipp Tomsich [Thu, 23 Mar 2023 18:47:57 +0000 (19:47 +0100)]
aarch64: disable LDP via tuning structure for -mcpu=ampere1
AmpereOne (-mcpu=ampere1) breaks LDP instructions into two uops.
Given the chance that this causes instructions to slip into the next
decoding cycle and the additional overheads when handling
cacheline-crossing LDP instructions, we disable the generation of LDP
isntructions through the tuning structure from instruction combining
(such as in peephole2).
Given the code-density benefits in builtins and prologue/epilogue
expansion, we allow LDPs there.
This commit:
* adds a new tuning option AARCH64_EXTRA_TUNE_NO_LDP_COMBINE
* allows -moverride=tune=... to override this
These changes are benchmark-driven, yielding the following changes
(with a net-overall improvement):
503.bwaves_r. -0.88%
507.cactuBSSN_r 0.35%
508.namd_r 3.09%
510.parest_r -2.99%
511.povray_r 5.54%
519.lbm_r 15.83%
521.wrf_r 0.56%
526.blender_r 2.47%
527.cam4_r 0.70%
538.imagick_r 0.00%
544.nab_r -0.33%
549.fotonik3d_r. -0.42%
554.roms_r 0.00%
-------------------------
= total 1.79%
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu> Co-Authored-By: Di Zhao <di.zhao@amperecomputing.com>
gcc/ChangeLog:
* config/aarch64/aarch64-tuning-flags.def (AARCH64_EXTRA_TUNING_OPTION):
Add AARCH64_EXTRA_TUNE_NO_LDP_COMBINE.
* config/aarch64/aarch64.cc (aarch64_operands_ok_for_ldpstp):
Check for the above tuning option when processing loads.
gcc/testsuite/ChangeLog:
* gcc.target/aarch64/ampere1-no_ldp_combine.c: New test.
Jakub Jelinek [Mon, 17 Apr 2023 09:45:53 +0000 (11:45 +0200)]
testsuite: Fix up vect-simd-clone-1[678]f.c tests some more
With
make check-gcc check-g++ -j32 -k RUNTESTFLAGS='--target_board=unix\{-m32,-m32/-mavx,-m32/-mavx512f,-m32/-march=cascadelake,-m64,-m64/-mavx,-m64/-mavx512f,-m64/-march=cascadelake\}
+vect.exp=vect-simd-clone*'
the vect-simd-clone-1[678]f.c tests fail with -m32/-mavx512f and -m32/-march=cascadelake,
in that case there are zero matches rather than the 4 expected for ia32.
-m64/-mavx512f and -m64/-march=cascadelake works fine though (2 expected
matches).
So, the following patch just adds -mno-avx512f for x86 non-lp64.
Richard Biener [Mon, 17 Apr 2023 07:22:57 +0000 (09:22 +0200)]
tree-optimization/109524 - ICE with VRP edge removal
VRP queues edges to process late for updating global ranges for
__builtin_unreachable. But this interferes with edge removal
from substitute_and_fold. The following deals with this by
looking up the edge with source/dest block indices which do not
become stale.
PR tree-optimization/109524
* tree-vrp.cc (remove_unreachable::m_list): Change to a
vector of pairs of block indices.
(remove_unreachable::maybe_register_block): Adjust.
(remove_unreachable::remove_and_update_globals): Likewise.
Deal with removed blocks.
As PR108809 mentioned, vec_xl_len_r and vec_xst_len_r are tested
in gcc.target/powerpc/builtins-5-p9-runnable.c.
The vector operand of these two bifs are different from the view
of v16_int8 between BE and LE, even it is same from the view of
128bits(uint128/V1TI).
The test case gcc.target/powerpc/builtins-5-p9-runnable.c was
written for LE environment, this patch updates it for BE.
Tested on ppc64 BE and LE.
Is this ok for trunk?
BR,
Jeff (Jiufu)
gcc/testsuite/ChangeLog:
PR testsuite/108809
* gcc.target/powerpc/builtins-5-p9-runnable.c: Update for BE.
Pan Li [Fri, 14 Apr 2023 03:25:11 +0000 (11:25 +0800)]
RISC-V: Add test cases for the RVV mask insn shortcut.
There are sorts of shortcut codegen for the RVV mask insn. For
example.
vmxor vd, va, va => vmclr vd.
We would like to add more optimization like this but first of all
we must add the tests for the existing shortcut optimization, to
ensure we don't break existing optimization from underlying shortcut
optimization.
gcc/testsuite/ChangeLog:
* gcc.target/riscv/rvv/base/mask_insn_shortcut.c: New test.
Jeff Law [Sun, 16 Apr 2023 15:55:32 +0000 (09:55 -0600)]
[committed] [PR target/109508] Adjust conditional move expansion for SFB
Recently the conditional move expander's predicates were loosened for the
benefit of the THEAD processors. In particular one operand that was
previously "register_operand" is now "reg_or_0_operand". That's fine for
THEAD, but breaks for SFB which requires a register for that operand.
This results in an ICE when compiling the testcase an SFB target such as
the sifive s76.
This change adjusts the expansion code slightly to copy the value into
a register for SFB.
Bootstrapped and regression tested (c,c++,fortran only) with a toolchain
configured to enable SFB by default.
PR target/109508
gcc/
* config/riscv/riscv.cc (riscv_expand_conditional_move): For
TARGET_SFB_ALU, force the true arm into a register.
gcc/testsuite
* gcc.target/riscv/pr109508.c: New test.
Roger Sayle [Sun, 16 Apr 2023 12:03:10 +0000 (13:03 +0100)]
[Committed] New test case gcc.target/avr/pr54816.c
PR target/54816 is now fixed on mainline. This adds a test case to
check that it doesn't regress in future. Tested with a cross compiler
to avr-elf. Committed as obvious.
2023-04-16 Roger Sayle <roger@nextmovesoftware.com>
gcc/testsuite/ChangeLog
PR target/54816
* gcc.target/avr/pr54816.c: New test case.
Eric Botcazou [Sat, 15 Apr 2023 17:35:02 +0000 (19:35 +0200)]
Fix fallout of previous change on x86/Linux
gcc/ada/
PR bootstrap/109510
* gcc-interface/decl.cc (gnat_to_gnu_entity) <types>: Do not reset
align to zero in any case. Set TYPE_USER_ALIGN on the type only if
it is an aggregate type, or else a type whose default alignment is
specifically capped on selected platforms.
Jason Merrill [Sat, 15 Apr 2023 02:40:43 +0000 (22:40 -0400)]
c++: constexpr aggregate destruction [PR109357]
We were assuming that the result of evaluation of TARGET_EXPR_INITIAL would
always be the new value of the temporary, but that's not necessarily true
when the initializer is complex (i.e. target_expr_needs_replace). In that
case evaluating the initializer initializes the temporary as a side-effect.
PR c++/109357
gcc/cp/ChangeLog:
* constexpr.cc (cxx_eval_constant_expression) [TARGET_EXPR]:
Check for complex initializer.
Jakub Jelinek [Sat, 15 Apr 2023 10:08:45 +0000 (12:08 +0200)]
if-conv: Small improvement for expansion of complex PHIs [PR109154]
The following patch is just a dumb improvement, gets rid of 2 unnecessary
instructions on both the PR's original testcase and on the two reduced ones,
both on -mcpu=neoverse-v1 and -mavx512f.
The thing is, if we have args_len (args_len >= 2) unique PHI arguments,
we need only args_len - 1 COND_EXPRs to expand the PHI, because first
COND_EXPR can merge 2 unique arguments and all the following ones merge
another unique argument with the previously merged arguments,
while the code for mysterious reasons was always emitting args_len
COND_EXPRs, where the first COND_EXPR merged the first and second unique
arguments, the second COND_EXPR merged the second unique argument with
result of merging the first and second unique arguments and the rest was
already expectable, nth COND_EXPR for n > 2 merged the nth unique argument
with result of merging the previous unique arguments.
Now, in my understanding, the bb_predicate for bb's predecessor need to
form a disjunct set which together creates the successor's bb_predicate,
so I don't see why we'd need to check all the bb_predicates, if we check
all but one then when all those other ones are false the last bb_predicate
is necessarily true. Given that the code attempts to sort argument with
most occurrences (so likely most complex combined predicate) last, I chose
not to test that last argument's predicate.
So e.g. on the testcase from comment 47 in the PR:
void
foo (int *f, int d, int e)
{
for (int i = 0; i < 1024; i++)
{
int a = f[i];
int t;
if (a < 0)
t = 1;
else if (a < e)
t = 1 - a * d;
else
t = 0;
f[i] = t;
}
}
we used to emit:
_7 = a_10 < 0;
_21 = a_10 >= 0;
_22 = a_10 < e_11(D);
_23 = _21 & _22;
_26 = a_10 >= e_11(D);
_27 = _21 & _26;
_ifc__42 = _7 ? 1 : t_13;
_ifc__43 = _23 ? t_13 : _ifc__42;
t_6 = _27 ? 0 : _ifc__43;
while the following patch changes it to:
_7 = a_10 < 0;
_21 = a_10 >= 0;
_22 = a_10 < e_11(D);
_23 = _21 & _22;
_ifc__42 = _23 ? t_13 : 0;
t_6 = _7 ? 1 : _ifc__42;
which I believe should be sufficient for a PHI <1, t_13, 0>.
I've gathered some statistics and on x86_64-linux and i686-linux
bootstraps/regtests, this code triggers:
92 4 4
112 2 4
141 3 4
4046 3 3
(where 2nd number is args_len and 3rd argument EDGE_COUNT (bb->preds)
and first argument count of those from sort | uniq -c | sort -n).
In all these cases the patch should squeze one extra COND_EXPR and
its associated predicate (the latter only if it wasn't used elsewhere).
Incrementally, I think we should try to perform some analysis on which
predicates depend on inverses of other predicates and if possible try
to sort the arguments better and omit testing unnecessary predicates.
So essentially for the above testcase deconstruct it back to:
_7 = a_10 < 0;
_22 = a_10 < e_11(D);
_ifc__42 = _22 ? t_13 : 0;
t_6 = _7 ? 1 : _ifc__42;
which is like what this patch produces, but with the & a_10 >= 0 part
removed, because the last predicate is a_10 < 0 and so testing a_10 >= 0
on what appears on the false branch doesn't make sense.
But I'm afraid that will take more work than is doable in stage4 right now.
2023-04-15 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/109154
* tree-if-conv.cc (predicate_scalar_phi): For complex PHIs, emit just
args_len - 1 COND_EXPRs rather than args_len. Formatting fix.
rs6000: don't expect __ibm128 with 64-bit long double [PR99708]
When long double is 64-bit wide, as on vxworks, the rs6000 backend
defines neither the __ibm128 type nor the __SIZEOF_IBM128__ macro, but
pr99708.c expected both to be always defined. Adjust the test to
match the implementation.
Co-Authored-By: Kewen Lin <linkw@linux.ibm.com>
for gcc/testsuite/ChangeLog
PR target/99708
* gcc.target/powerpc/pr99708.c: Accept lack of
__SIZEOF_IBM128__ when long double is 64-bit wide.
Here we hit the MEM_REF case, with its arg an ADDR_EXPR, but had no handling
for that and wrongly assumed it would be a reference to a local variable.
This patch overhauls the logic for deciding whether the target is something
to warn about so that we only warn if we specifically recognize the target
as non-local. None of the existing tests regress as a result.
Harald Anlauf [Fri, 14 Apr 2023 18:45:19 +0000 (20:45 +0200)]
Fortran: fix compile-time simplification of SET_EXPONENT [PR109511]
gcc/fortran/ChangeLog:
PR fortran/109511
* simplify.cc (gfc_simplify_set_exponent): Fix implementation of
compile-time simplification of intrinsic SET_EXPONENT for argument
X < 1 and for I < 0.
gcc/testsuite/ChangeLog:
PR fortran/109511
* gfortran.dg/set_exponent_1.f90: New test.
Eric Botcazou [Fri, 14 Apr 2023 18:14:07 +0000 (20:14 +0200)]
Fix build failure of Ada runtime for Aarch64 targets
The Aarch64 back-end now asserts that the main variant of scalar types
has TYPE_USER_ALIGN cleared, and that's not the case for scalar types
declared with a confirming alignment clause in Ada.
gcc/ada/
PR bootstrap/109510
* gcc-interface/decl.cc (gnat_to_gnu_entity) <types>: Reset align
to zero if its value is equal to TYPE_ALIGN and the type is scalar.
Set TYPE_USER_ALIGN on the type only if align is positive.
Patrick Palka [Fri, 14 Apr 2023 14:31:54 +0000 (10:31 -0400)]
libstdc++: Move down definitions of ranges::cbegin/cend/cetc
This moves down the definitions of the range const-access CPOs to after
the definition of input_range in preparation for implementing P2278R4
which redefines these CPOs in a way that indirectly uses input_range.
libstdc++-v3/ChangeLog:
* include/bits/ranges_base.h (__cust_access::__as_const)
(__cust_access::_CBegin, __cust::cbegin)
(__cust_access::_CEnd, __cust::cend)
(__cust_access::_CRBegin, __cust::crbegin)
(__cust_access::_CREnd, __cust::crend)
(__cust_access::_CData, __cust::cdata): Move down definitions to
shortly after the definition of input_range.
Jonathan Wakely [Thu, 13 Apr 2023 15:34:51 +0000 (16:34 +0100)]
libstdc++: Improve diagnostics for invalid std::format calls
Add a static_assert and a comment so that calling std::format for
unformattable argument types will now show:
/home/jwakely/gcc/13/include/c++/13.0.1/format:3563:22: error: static assertion failed: std::formatter must be specialized for each format arg
3563 | static_assert((is_default_constructible_v<formatter<_Args, _CharT>> && ...),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and:
140 | formatter() = delete; // No std::formatter specialization for this type.
libstdc++-v3/ChangeLog:
* include/std/format (formatter): Add comment to deleted default
constructor of primary template.
(_Checking_scanner): Add static_assert.
Paul Thomas [Fri, 14 Apr 2023 10:14:00 +0000 (11:14 +0100)]
Fortran: Fix an excess finalization during allocation [PR104272]
2023-04-14 Paul Thomas <pault@gcc.gnu.org>
gcc/fortran
PR fortran/104272
* gfortran.h : Add expr3_not_explicit bit field to gfc_code.
* resolve.cc (resolve_allocate_expr): Set bit field when the
default initializer is applied to expr3.
* trans-stmt.cc (gfc_trans_allocate): If expr3_not_explicit is
set, do not deallocate expr3.
gcc/testsuite/
PR fortran/104272
* gfortran.dg/class_result_8.f90 : Number of builtin_frees down
from 6 to 5 without memory leaks.
* gfortran.dg/finalize_52.f90: New test
Richard Biener [Fri, 14 Apr 2023 07:55:27 +0000 (09:55 +0200)]
tree-optimization/109502 - vector conversion between mask and non-mask
The following fixes a check that should have rejected vectorizing
a conversion between a mask and non-mask type. Those should be
done via pattern statements.
PR tree-optimization/109502
* tree-vect-stmts.cc (vectorizable_assignment): Fix
check for conversion between mask and non-mask types.
Richard Biener [Fri, 14 Apr 2023 09:35:58 +0000 (11:35 +0200)]
Fix vect-simd-clone testcase dump scanning
This replaces i686*-*-* && { ! lp64 } with the appropriate
{ i?86-*-* x86_64-*-* } && { ! lp64 } for the testcases and
also amends the e variants checking last variant for avx.
I've used avx in the dump scanning, not avx_runtime, since
the dumps get produced when one would not execute but only
compile them. The f varaints lack AVX checking, I didn't
rectify this with this patch.
* gcc.dg/vect/vect-simd-clone-16e.c: Fix x86 lp64 checking
and add missing avx guard.
* gcc.dg/vect/vect-simd-clone-17e.c: Likewise.
* gcc.dg/vect/vect-simd-clone-18e.c: Likewise.
* gcc.dg/vect/vect-simd-clone-16f.c: Fix x86 lp64 checking.
* gcc.dg/vect/vect-simd-clone-17f.c: Likewise.
* gcc.dg/vect/vect-simd-clone-18f.c: Likewise.
Jakub Jelinek [Fri, 14 Apr 2023 07:20:49 +0000 (09:20 +0200)]
combine: Fix AND handling for WORD_REGISTER_OPERATIONS targets [PR109040]
The following testcase is miscompiled on riscv since the addition
of *mvconst_internal define_insn_and_split.
We have:
(insn 36 35 39 2 (set (mem/c:SI (plus:SI (reg/f:SI 65 frame)
(const_int -64 [0xffffffffffffffc0])) [2 S4 A128])
(reg:SI 166)) "pr109040.c":9:11 178 {*movsi_internal}
(expr_list:REG_DEAD (reg:SI 166)
(nil)))
(insn 39 36 40 2 (set (reg:SI 171)
(zero_extend:SI (mem/c:HI (plus:SI (reg/f:SI 65 frame)
(const_int -64 [0xffffffffffffffc0])) [0 S2 A128]))) "pr109040.c":9:11 111 {*zero_extendhisi2}
(nil))
and RTL DSE's replace_read since r0-86337-g18b526e806ab6455 handles
even different modes like in the above case, and so it optimizes it into:
(insn 47 35 39 2 (set (reg:HI 175)
(subreg:HI (reg:SI 166) 0)) "pr109040.c":9:11 179 {*movhi_internal}
(expr_list:REG_DEAD (reg:SI 166)
(nil)))
(insn 39 47 40 2 (set (reg:SI 171)
(zero_extend:SI (reg:HI 175))) "pr109040.c":9:11 111 {*zero_extendhisi2}
(expr_list:REG_DEAD (reg:HI 175)
(nil)))
Pseudo 166 is result of AND with 0x8084c constant (forced into a register).
Combine attempts to combine the AND with the insn 47 above created by DSE,
and turns it because of WORD_REGISTER_OPERATIONS and its assumption that all
the subword operations are actually done on word mode into:
(set (subreg:SI (reg:HI 175) 0)
(and:SI (reg:SI 167 [ m ])
(reg:SI 168)))
and later on the ZERO_EXTEND is thrown away.
We then see
(and:SI (subreg:SI (reg:HI 175) 0) (const_int 0x84c))
and optimize that into
(subreg:SI (and:HI (reg:HI 175) (const_int 0x84c)) 0)
which is still fine, in WORD_REGISTER_OPERATIONS the AND in HImode
will set all upper bits up to BITS_PER_WORD to zeros.
But later on simplify_binary_operation_1 or simplify_and_const_int_1
sees that because nonzero_bits ((reg:HI 175), HImode) == 0x84c, we can
optimize the AND into (reg:HI 175). That isn't correct, because while
the low 16 bits of that REG are known to have all bits but 0x84c cleared,
we don't know that all the upper 16 bits are all clear as well.
So, for WORD_REGISTER_OPERATIONS for integral modes smaller than word mode,
we need to check all bits from word_mode in nonzero_bits for the optimizations.
2023-04-14 Jeff Law <jlaw@ventanamicro.com>
Jakub Jelinek <jakub@redhat.com>
PR target/108947
PR target/109040
* combine.cc (simplify_and_const_int_1): Compute nonzero_bits in
word_mode rather than mode if WORD_REGISTER_OPERATIONS and mode is
smaller than word_mode.
* simplify-rtx.cc (simplify_context::simplify_binary_operation_1)
<case AND>: Likewise.
* gcc.dg/pr108947.c: New test.
* gcc.c-torture/execute/pr109040.c: New test.
Jakub Jelinek [Fri, 14 Apr 2023 07:19:25 +0000 (09:19 +0200)]
loop-iv: Fix up bounds computation
On Thu, Apr 13, 2023 at 06:35:07AM -0600, Jeff Law wrote:
> Bootstrap was successful with v3, but there's hundreds of testsuite failures
> due to the simplify-rtx hunk. compile/20070520-1.c for example when
> compiled with: -O3 -funroll-loops -march=rv64gc -mabi=lp64d
>
> Thursdays are my hell day. It's unlikely I'd be able to look at this at all
> today.
So, seems to me this is because loop-iv.cc asks for invalid RTL to be
simplified, it calls simplify_gen_binary (AND, SImode,
(subreg:SI (plus:DI (reg:DI 289 [ ivtmp_312 ])
(const_int 4294967295 [0xffffffff])) 0),
(const_int 4294967295 [0xffffffff]))
but 0xffffffff is not valid SImode CONST_INT, and unlike previously
we no longer on WORD_REGISTER_OPERATIONS targets which have DImode
word_mode optimize that into the op0, so the invalid constant is emitted
into the IL and checking fails.
The following patch fixes that (and we optimize that & -1 away even earlier
with that).
2023-04-14 Jakub Jelinek <jakub@redhat.com>
* loop-iv.cc (iv_number_of_iterations): Use gen_int_mode instead
of GEN_INT.
testsuite: filter out warning noise for CWE-1341 test
The case file-CWE-1341-example.c checkes [CWE-1341](`double-fclose`).
While on some systems, besides [CWE-1341], a message of [CWE-415] is
also reported. On those systems, attribute `malloc` may be attached on
fopen:
```
# 258 "/usr/include/stdio.h" 3 4
extern FILE *fopen (const char *__restrict __filename,
const char *__restrict __modes)
__attribute__ ((__malloc__)) __attribute__ ((__malloc__ (fclose, 1))) ;
or say: __attribute_malloc__ __attr_dealloc_fclose __wur;
```
See (PR analyzer/108722) for future fix in the analyzer.
This workaround patch adds -Wno-analyzer-double-free to this case.
Patrick Palka [Thu, 13 Apr 2023 20:02:21 +0000 (16:02 -0400)]
c++: 'typename T::X' vs 'struct T::X' lookup [PR109420]
r13-6098-g46711ff8e60d64 made make_typename_type no longer ignore
non-types during the lookup, unless the TYPENAME_TYPE in question was
followed by the :: scope resolution operator. But there is another
exception to this rule: we need to ignore non-types during the lookup
also if the TYPENAME_TYPE was named with a tag other than 'typename',
such as 'struct' or 'enum', since in that case we're dealing with an
elaborated-type-specifier and so [basic.lookup.elab] applies. This
patch implements this additional exception.
PR c++/109420
gcc/cp/ChangeLog:
* decl.cc (make_typename_type): Also ignore non-types during the
lookup if tag_type corresponds to an elaborated-type-specifier.
* pt.cc (tsubst) <case TYPENAME_TYPE>: Pass class_type or
enum_type as tag_type to make_typename_type accordingly instead
of always passing typename_type.
Jason Merrill [Tue, 4 Apr 2023 03:20:13 +0000 (23:20 -0400)]
c++: make trait of incomplete type a permerror [PR109277]
An incomplete type argument to several traits is specified to be undefined
behavior in the library; since it's a compile-time property, we diagnose
it. But apparently some code was relying on the previous behavior of not
diagnosing. So let's make it a permerror.
The assert in cxx_incomplete_type_diagnostic didn't like that, and I don't
see the point of having the assert, so let's just remove it.
Gaius Mulley [Thu, 13 Apr 2023 16:02:48 +0000 (17:02 +0100)]
PR modula2/109496 Fix constant char parameter passing to an array of char
This patch fixes PR modula2/109496 and PR modula2/109497. The fix for
PR modula2/109496 promotes a char constant to a string. The PR
modula2/109497 allows for constant chars to be added to form a string.
The fixes for both PR's occur in M2GenGCC.mod and M2GCCDeclare.mod
after the resolving of constant declarations.
gcc/m2/ChangeLog:
* gm2-compiler/M2ALU.def (PopChar): New procedure function.
* gm2-compiler/M2ALU.mod (PopChar): New procedure function.
* gm2-compiler/M2GCCDeclare.mod (PromoteToString): Detect
a single constant char and build a C string.
* gm2-compiler/M2GenGCC.mod (IsConstStr): New procedure
function.
(GetStr): New procedure function.
(FoldAdd): Use IsConstStr.
* gm2-compiler/M2Quads.mod: Formatting changes.
* gm2-gcc/m2expr.cc (m2expr_GetCstInteger): New function.
* gm2-gcc/m2expr.def (GetCstInteger): New procedure function.
* gm2-gcc/m2expr.h (m2expr_GetCstInteger): New prototype.
gcc/testsuite/ChangeLog:
PR modula2/109497
* gm2/pim/run/pass/addcharconst.mod: New test.
PR modula2/109496
* gm2/pim/run/pass/singlechar.mod: New test.
aarch64: Don't trust TYPE_ALIGN for pointers [PR108910]
The aarch64 PCS rules ignore user alignment for scalars and
vectors and use the "natural" alignment of the type. GCC tried
to calculate that natural alignment using:
TYPE_ALIGN (TYPE_MAIN_VARIANT (type))
But as discussed in the PR, it's possible that the main variant
of a pointer type is an overaligned type (although that's usually
accidental).
This isn't known to be a problem for other types, so this patch
changes the bare minimum. It might be that we need to ignore
TYPE_ALIGN in other cases too.
gcc/
PR target/108910
* config/aarch64/aarch64.cc (aarch64_function_arg_alignment): Do
not trust TYPE_ALIGN for pointer types; use POINTER_SIZE instead.
gcc/testsuite/
PR target/108910
* gcc.dg/torture/pr108910.c: New test.
Richard Biener [Thu, 13 Apr 2023 12:09:30 +0000 (14:09 +0200)]
tree-optimization/109491 - ICE in expressions_equal_p
At some point I elided the NULL pointer check in expressions_equal_p
because it shouldn't be necessary not realizing that for example
TARGET_MEM_REF has optional operands we cannot substitute with
something non-NULL with the same semantics. The following does the
simple thing and restore the check removed in r11-4982.
PR tree-optimization/109491
* tree-ssa-sccvn.cc (expressions_equal_p): Restore the
NULL operands test.
Jonathan Wakely [Wed, 12 Apr 2023 21:14:05 +0000 (22:14 +0100)]
libstdc++: Fix some AIX test failures
AIX <sys/thread.h> defines struct tstate with non-reserved names, so
adjust the 17_intro/names.cc test. It also defines struct user, which
conflicts with namespace user in some tests.
Replacing the global operator new doesn't work on AIX the same way as it
does for ELF, so skip some tests that depend on replacing it.
Add missing DG directives to synchronized_value test so it doesn't run
for the single-threaded AIX multilib.
libstdc++-v3/ChangeLog:
* testsuite/17_intro/names.cc [_AIX]: Do not define policy.
* testsuite/19_diagnostics/error_code/cons/lwg3629.cc: Rename
namespace to avoid clashing with libc struct.
* testsuite/19_diagnostics/error_condition/cons/lwg3629.cc:
Likewise.
* testsuite/23_containers/unordered_map/96088.cc: Skip on AIX.
* testsuite/23_containers/unordered_multimap/96088.cc: Likewise.
* testsuite/23_containers/unordered_multiset/96088.cc: Likewise.
* testsuite/23_containers/unordered_set/96088.cc: Likewise.
* testsuite/experimental/synchronized_value.cc: Require gthreads
and add missing option for pthreads targets.
Patrick Palka [Wed, 12 Apr 2023 17:04:36 +0000 (13:04 -0400)]
libstdc++: Implement LWG 3904 change to lazy_split_view's iterator
libstdc++-v3/ChangeLog:
* include/std/ranges (lazy_split_view::_OuterIter::_OuterIter):
Propagate _M_trailing_empty in the const-converting constructor
as per LWG 3904.
* testsuite/std/ranges/adaptors/adjacent/1.cc (test04): Correct
assertion.
* testsuite/std/ranges/adaptors/lazy_split.cc (test12): New test.
Patrick Palka [Wed, 12 Apr 2023 16:40:41 +0000 (12:40 -0400)]
libstdc++: Ensure headers used by fast_float are included
This makes floating_from_chars.cc explicitly include all headers
that are used by the original fast_float amalgamation according to r12-6647-gf5c8b82512f9d3, except:
1. <cctype> since fast_float doesn't seem to use anything from it
2. <cinttypes> since fast_float doesn't seem to use anything directly
from it (this header also pulls in <cstdint>)
3. <system_error> since std::errc is naturally already available
from <charconv>
This avoids potential fast_float build failures on platforms for which
some required headers (in particular <cstdint>) end up not getting
transitively included from elsewhere.
libstdc++-v3/ChangeLog:
* src/c++17/floating_from_chars.cc: Include <algorithm>,
<iterator>, <limits> and <cstdint>.
RISC-V: Fix supporting data type according to RVV ISA. [PR109479]
For vint64m*_t, we should only allow them in zve64* instead of zve32*_zvl64b (>=64b).
Ideally, we should make error message more friendly like Clang.
https://godbolt.org/z/f9GMv4dMo to report the RVV type require extenstion name.
However, I failed to find a way to do that. So current GCC can only report "unknown" type.
And I added comments to remind us doing this in the future.
PR target/109479
* gcc.target/riscv/rvv/base/pr109479-1.c: New test.
* gcc.target/riscv/rvv/base/pr109479-2.c: New test.
* gcc.target/riscv/rvv/base/pr109479-3.c: New test.
* gcc.target/riscv/rvv/base/pr109479-4.c: New test.
* gcc.target/riscv/rvv/base/pr109479-5.c: New test.
* gcc.target/riscv/rvv/base/pr109479-6.c: New test.
Jakub Jelinek [Wed, 12 Apr 2023 14:55:15 +0000 (16:55 +0200)]
reassoc: Fix up another ICE with returns_twice call [PR109410]
The following testcase ICEs in reassoc, unlike the last case I've fixed
there here SSA_NAME_USED_IN_ABNORMAL_PHI is not the case anywhere.
build_and_add_sum places new statements after the later appearing definition
of an operand but if both operands are default defs or constants, we place
statement at the start of the function.
If the very first statement of a function is a call to returns_twice
function, this doesn't work though, because that call has to be the first
thing in its basic block, so the following patch splits the entry successor
edge such that the new statements are added into a different block from the
returns_twice call.
I think we should in stage1 reconsider such placements, I think it
unnecessarily enlarges the lifetime of the new lhs if its operand(s)
are used more than once in the function. Unless something sinks those
again. Would be nice to place it closer to the actual uses (or where
they will be placed).
2023-04-12 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/109410
* tree-ssa-reassoc.cc (build_and_add_sum): Split edge from entry
block if first statement of the function is a call to returns_twice
function.
Jakub Jelinek [Wed, 12 Apr 2023 14:53:23 +0000 (16:53 +0200)]
i386: Fix up z operand modifier diagnostics on inline-asm [PR109458]
On the following testcase, we emit weird diagnostics.
User used the z modifier, but diagnostics talks about Z instead.
This is because z is implemented by doing some stuff and then falling
through into the Z case.
The following patch adjusts the Z diagnostics, such that it prints whatever
modifier user actually uses in places which could happen with either
modifier.
Furthermore, in case of the non-integer operand used with operand code %<z%>
warning the warning location was incorrect (and of function), so I've used
warning_for_asm to get it a proper location in case it is a user inline-asm.
2023-04-12 Jakub Jelinek <jakub@redhat.com>
PR target/109458
* config/i386/i386.cc: Include rtl-error.h.
(ix86_print_operand): For z modifier warning, use warning_for_asm
if this_is_asm_operands. For Z modifier errors, use %c and code
instead of hardcoded Z.
The $@ argument to the compiler is causing
only a warning in some gcc versions but an
error in others. In any case, $@ was never
necessary so remove it completely, just like
the rules in x-mingw32 where the object file
gets named after the source file.
This fixes both warnings and errors about
sym-mingw32.o appearing in the command line
unnecessarily.
The -nostdlib flag is required along with -r
for older gcc versions that don't apply it
automatically with -r, resulting in main
functions erroneously entering a partial link.
Signed-off-by: Jonathan Yong <10walls@gmail.com>
gcc/ChangeLog:
Jakub Jelinek [Wed, 12 Apr 2023 14:22:28 +0000 (16:22 +0200)]
c++: Fix Solaris bootstraps across midnight
When working on the PR109040 fix, I wanted to test it on some
WORD_REGISTER_OPERATIONS target and tried sparc-solaris on GCC Farm.
My bootstrap failed in comparison failure on cp/module.o, because
Solaris date doesn't support the -r option and one stage's cp/module.o
was built before midnight and next stage's cp/module.o after midnight,
so they had different -DMODULE_VERSION= value.
Now, I think the advice (don't bootstrap at midnight) is something
we shouldn't have, so the following patch stores the module version
(still generated through the same way, date -r cp/module.cc
if it works, otherwise just date) into a temporary file, makes sure
that temporary file is updated when cp/module.cc source is updated
and when date -r doesn't work copies file from previous stage
if it is newer than cp/module.cc.
2023-04-12 Jakub Jelinek <jakub@redhat.com>
* Make-lang.in (s-cp-module-version): New target.
(cp/module.o): Depend on it.
(MODULE_VERSION): Remove variable.
(CFLAGS-cp/module.o): For -DMODULE_VERSION= argument just
cat s-cp-module-version.
Andrew MacLeod [Tue, 11 Apr 2023 21:29:03 +0000 (17:29 -0400)]
Don't use ANY PHI equivalences in range-on-entry.
PR 108139 dissallows PHI equivalencies in the on-entry calculator, but
it was only checking if the equivlaence was a PHI. In this case, NAME
itself is a PHI with an equivlaence caused by an undefined value, so we
also need to check that case. Unfortunately this un-fixes 101912.
PR tree-optimization/109462
gcc/
* gimple-range-cache.cc (ranger_cache::fill_block_cache): Don't
check for equivalences if NAME is a phi node.
gcc/testsuite/
* gcc.dg/uninit-pr101912.c: XFAIL the warning.
Jonathan Wakely [Wed, 12 Apr 2023 10:55:24 +0000 (11:55 +0100)]
libstdc++: Initialize all members of basic_endpoint union [PR109482]
On Solaris the in_addr struct contains a union and value-initializing it
does not make the s_addr member active. This means we can't access that
member later during constant evaluation.
Make the constructors explicitly set every member that we might want to
read later in constexpr member functions. This means even the default
constructor can only be constexpr for C++20, because we can't change the
active member of a union in older standards.
libstdc++-v3/ChangeLog:
PR libstdc++/109482
* include/experimental/internet (basic_endpoint::basic_endpoint()):
Ensure that the required union members are active. Only define
as constexpr for C++20 and later.
(basic_endpoint::basic_endpoint(const protocol_type&, port_type)):
Likewise.
* testsuite/experimental/net/internet/endpoint/cons.cc: Only
check constexpr default constructor for C++20 and later.
* testsuite/experimental/net/internet/endpoint/extensible.cc:
Likewise.
Richard Biener [Wed, 12 Apr 2023 08:22:08 +0000 (10:22 +0200)]
tree-optimization/109473 - ICE with reduction epilog adjustment op
The following makes sure to carry out the reduction epilog adjustment
in the original computation type which for pointers is an unsigned
integer type. There's a similar issue with signed vs. unsigned ops
and overflow which is fixed by this as well.
PR tree-optimization/109473
* tree-vect-loop.cc (vect_create_epilog_for_reduction):
Convert scalar result to the computation type before performing
the reduction adjustment.
Harald Anlauf [Tue, 11 Apr 2023 19:44:20 +0000 (21:44 +0200)]
Fortran: fix functions with entry and pointer/allocatable result [PR104312]
gcc/fortran/ChangeLog:
PR fortran/104312
* resolve.cc (resolve_entries): Handle functions with ENTRY and
ALLOCATABLE results.
* trans-expr.cc (gfc_conv_procedure_call): Functions with a result
with the POINTER or ALLOCATABLE attribute shall not get any special
treatment with -ff2c, as they cannot be written in Fortran 77.
* trans-types.cc (gfc_return_by_reference): Likewise.
(gfc_get_function_type): Likewise.
gcc/testsuite/ChangeLog:
PR fortran/104312
* gfortran.dg/entry_26.f90: New test.
* gfortran.dg/entry_27.f90: New test.
Harald Anlauf [Tue, 11 Apr 2023 14:44:32 +0000 (16:44 +0200)]
Fortran: resolve correct generic with TYPE(C_PTR) arguments [PR61615,PR99982]
gcc/fortran/ChangeLog:
PR fortran/61615
PR fortran/99982
* interface.cc (compare_parameter): Enable type and rank checks for
arguments of derived type from the intrinsic module ISO_C_BINDING.
gcc/testsuite/ChangeLog:
PR fortran/61615
PR fortran/99982
* gfortran.dg/interface_49.f90: New test.
projects / thirdparty / gcc.git / log
