git-p4: set useClientSpec variable on initial clone

[thirdparty/git.git] / contrib / fast-import / git-p4

#!/usr/bin/env python
#
# git-p4.py -- A tool for bidirectional operation between a Perforce depot and git.
#
# Author: Simon Hausmann <simon@lst.de>
# Copyright: 2007 Simon Hausmann <simon@lst.de>
#            2007 Trolltech ASA
# License: MIT <http://www.opensource.org/licenses/mit-license.php>
#

import optparse, sys, os, marshal, subprocess, shelve
import tempfile, getopt, os.path, time, platform
import re

verbose = False


def p4_build_cmd(cmd):
    """Build a suitable p4 command line.

    This consolidates building and returning a p4 command line into one
    location. It means that hooking into the environment, or other configuration
    can be done more easily.
    """
    real_cmd = ["p4"]

    user = gitConfig("git-p4.user")
    if len(user) > 0:
        real_cmd += ["-u",user]

    password = gitConfig("git-p4.password")
    if len(password) > 0:
        real_cmd += ["-P", password]

    port = gitConfig("git-p4.port")
    if len(port) > 0:
        real_cmd += ["-p", port]

    host = gitConfig("git-p4.host")
    if len(host) > 0:
        real_cmd += ["-h", host]

    client = gitConfig("git-p4.client")
    if len(client) > 0:
        real_cmd += ["-c", client]


    if isinstance(cmd,basestring):
        real_cmd = ' '.join(real_cmd) + ' ' + cmd
    else:
        real_cmd += cmd
    return real_cmd

def chdir(dir):
    # P4 uses the PWD environment variable rather than getcwd(). Since we're
    # not using the shell, we have to set it ourselves.  This path could
    # be relative, so go there first, then figure out where we ended up.
    os.chdir(dir)
    os.environ['PWD'] = os.getcwd()

def die(msg):
    if verbose:
        raise Exception(msg)
    else:
        sys.stderr.write(msg + "\n")
        sys.exit(1)

def write_pipe(c, stdin):
    if verbose:
        sys.stderr.write('Writing pipe: %s\n' % str(c))

    expand = isinstance(c,basestring)
    p = subprocess.Popen(c, stdin=subprocess.PIPE, shell=expand)
    pipe = p.stdin
    val = pipe.write(stdin)
    pipe.close()
    if p.wait():
        die('Command failed: %s' % str(c))

    return val

def p4_write_pipe(c, stdin):
    real_cmd = p4_build_cmd(c)
    return write_pipe(real_cmd, stdin)

def read_pipe(c, ignore_error=False):
    if verbose:
        sys.stderr.write('Reading pipe: %s\n' % str(c))

    expand = isinstance(c,basestring)
    p = subprocess.Popen(c, stdout=subprocess.PIPE, shell=expand)
    pipe = p.stdout
    val = pipe.read()
    if p.wait() and not ignore_error:
        die('Command failed: %s' % str(c))

    return val

def p4_read_pipe(c, ignore_error=False):
    real_cmd = p4_build_cmd(c)
    return read_pipe(real_cmd, ignore_error)

def read_pipe_lines(c):
    if verbose:
        sys.stderr.write('Reading pipe: %s\n' % str(c))

    expand = isinstance(c, basestring)
    p = subprocess.Popen(c, stdout=subprocess.PIPE, shell=expand)
    pipe = p.stdout
    val = pipe.readlines()
    if pipe.close() or p.wait():
        die('Command failed: %s' % str(c))

    return val

def p4_read_pipe_lines(c):
    """Specifically invoke p4 on the command supplied. """
    real_cmd = p4_build_cmd(c)
    return read_pipe_lines(real_cmd)

def system(cmd):
    expand = isinstance(cmd,basestring)
    if verbose:
        sys.stderr.write("executing %s\n" % str(cmd))
    subprocess.check_call(cmd, shell=expand)

def p4_system(cmd):
    """Specifically invoke p4 as the system command. """
    real_cmd = p4_build_cmd(cmd)
    expand = isinstance(real_cmd, basestring)
    subprocess.check_call(real_cmd, shell=expand)

def p4_integrate(src, dest):
    p4_system(["integrate", "-Dt", src, dest])

def p4_sync(path):
    p4_system(["sync", path])

def p4_add(f):
    p4_system(["add", f])

def p4_delete(f):
    p4_system(["delete", f])

def p4_edit(f):
    p4_system(["edit", f])

def p4_revert(f):
    p4_system(["revert", f])

def p4_reopen(type, file):
    p4_system(["reopen", "-t", type, file])

#
# Canonicalize the p4 type and return a tuple of the
# base type, plus any modifiers.  See "p4 help filetypes"
# for a list and explanation.
#
def split_p4_type(p4type):

    p4_filetypes_historical = {
        "ctempobj": "binary+Sw",
        "ctext": "text+C",
        "cxtext": "text+Cx",
        "ktext": "text+k",
        "kxtext": "text+kx",
        "ltext": "text+F",
        "tempobj": "binary+FSw",
        "ubinary": "binary+F",
        "uresource": "resource+F",
        "uxbinary": "binary+Fx",
        "xbinary": "binary+x",
        "xltext": "text+Fx",
        "xtempobj": "binary+Swx",
        "xtext": "text+x",
        "xunicode": "unicode+x",
        "xutf16": "utf16+x",
    }
    if p4type in p4_filetypes_historical:
        p4type = p4_filetypes_historical[p4type]
    mods = ""
    s = p4type.split("+")
    base = s[0]
    mods = ""
    if len(s) > 1:
        mods = s[1]
    return (base, mods)


def setP4ExecBit(file, mode):
    # Reopens an already open file and changes the execute bit to match
    # the execute bit setting in the passed in mode.

    p4Type = "+x"

    if not isModeExec(mode):
        p4Type = getP4OpenedType(file)
        p4Type = re.sub('^([cku]?)x(.*)', '\\1\\2', p4Type)
        p4Type = re.sub('(.*?\+.*?)x(.*?)', '\\1\\2', p4Type)
        if p4Type[-1] == "+":
            p4Type = p4Type[0:-1]

    p4_reopen(p4Type, file)

def getP4OpenedType(file):
    # Returns the perforce file type for the given file.

    result = p4_read_pipe(["opened", file])
    match = re.match(".*\((.+)\)\r?$", result)
    if match:
        return match.group(1)
    else:
        die("Could not determine file type for %s (result: '%s')" % (file, result))

def diffTreePattern():
    # This is a simple generator for the diff tree regex pattern. This could be
    # a class variable if this and parseDiffTreeEntry were a part of a class.
    pattern = re.compile(':(\d+) (\d+) (\w+) (\w+) ([A-Z])(\d+)?\t(.*?)((\t(.*))|$)')
    while True:
        yield pattern

def parseDiffTreeEntry(entry):
    """Parses a single diff tree entry into its component elements.

    See git-diff-tree(1) manpage for details about the format of the diff
    output. This method returns a dictionary with the following elements:

    src_mode - The mode of the source file
    dst_mode - The mode of the destination file
    src_sha1 - The sha1 for the source file
    dst_sha1 - The sha1 fr the destination file
    status - The one letter status of the diff (i.e. 'A', 'M', 'D', etc)
    status_score - The score for the status (applicable for 'C' and 'R'
                   statuses). This is None if there is no score.
    src - The path for the source file.
    dst - The path for the destination file. This is only present for
          copy or renames. If it is not present, this is None.

    If the pattern is not matched, None is returned."""

    match = diffTreePattern().next().match(entry)
    if match:
        return {
            'src_mode': match.group(1),
            'dst_mode': match.group(2),
            'src_sha1': match.group(3),
            'dst_sha1': match.group(4),
            'status': match.group(5),
            'status_score': match.group(6),
            'src': match.group(7),
            'dst': match.group(10)
        }
    return None

def isModeExec(mode):
    # Returns True if the given git mode represents an executable file,
    # otherwise False.
    return mode[-3:] == "755"

def isModeExecChanged(src_mode, dst_mode):
    return isModeExec(src_mode) != isModeExec(dst_mode)

def p4CmdList(cmd, stdin=None, stdin_mode='w+b', cb=None):

    if isinstance(cmd,basestring):
        cmd = "-G " + cmd
        expand = True
    else:
        cmd = ["-G"] + cmd
        expand = False

    cmd = p4_build_cmd(cmd)
    if verbose:
        sys.stderr.write("Opening pipe: %s\n" % str(cmd))

    # Use a temporary file to avoid deadlocks without
    # subprocess.communicate(), which would put another copy
    # of stdout into memory.
    stdin_file = None
    if stdin is not None:
        stdin_file = tempfile.TemporaryFile(prefix='p4-stdin', mode=stdin_mode)
        if isinstance(stdin,basestring):
            stdin_file.write(stdin)
        else:
            for i in stdin:
                stdin_file.write(i + '\n')
        stdin_file.flush()
        stdin_file.seek(0)

    p4 = subprocess.Popen(cmd,
                          shell=expand,
                          stdin=stdin_file,
                          stdout=subprocess.PIPE)

    result = []
    try:
        while True:
            entry = marshal.load(p4.stdout)
            if cb is not None:
                cb(entry)
            else:
                result.append(entry)
    except EOFError:
        pass
    exitCode = p4.wait()
    if exitCode != 0:
        entry = {}
        entry["p4ExitCode"] = exitCode
        result.append(entry)

    return result

def p4Cmd(cmd):
    list = p4CmdList(cmd)
    result = {}
    for entry in list:
        result.update(entry)
    return result;

def p4Where(depotPath):
    if not depotPath.endswith("/"):
        depotPath += "/"
    depotPath = depotPath + "..."
    outputList = p4CmdList(["where", depotPath])
    output = None
    for entry in outputList:
        if "depotFile" in entry:
            if entry["depotFile"] == depotPath:
                output = entry
                break
        elif "data" in entry:
            data = entry.get("data")
            space = data.find(" ")
            if data[:space] == depotPath:
                output = entry
                break
    if output == None:
        return ""
    if output["code"] == "error":
        return ""
    clientPath = ""
    if "path" in output:
        clientPath = output.get("path")
    elif "data" in output:
        data = output.get("data")
        lastSpace = data.rfind(" ")
        clientPath = data[lastSpace + 1:]

    if clientPath.endswith("..."):
        clientPath = clientPath[:-3]
    return clientPath

def currentGitBranch():
    return read_pipe("git name-rev HEAD").split(" ")[1].strip()

def isValidGitDir(path):
    if (os.path.exists(path + "/HEAD")
        and os.path.exists(path + "/refs") and os.path.exists(path + "/objects")):
        return True;
    return False

def parseRevision(ref):
    return read_pipe("git rev-parse %s" % ref).strip()

def branchExists(ref):
    rev = read_pipe(["git", "rev-parse", "-q", "--verify", ref],
                     ignore_error=True)
    return len(rev) > 0

def extractLogMessageFromGitCommit(commit):
    logMessage = ""

    ## fixme: title is first line of commit, not 1st paragraph.
    foundTitle = False
    for log in read_pipe_lines("git cat-file commit %s" % commit):
       if not foundTitle:
           if len(log) == 1:
               foundTitle = True
           continue

       logMessage += log
    return logMessage

def extractSettingsGitLog(log):
    values = {}
    for line in log.split("\n"):
        line = line.strip()
        m = re.search (r"^ *\[git-p4: (.*)\]$", line)
        if not m:
            continue

        assignments = m.group(1).split (':')
        for a in assignments:
            vals = a.split ('=')
            key = vals[0].strip()
            val = ('='.join (vals[1:])).strip()
            if val.endswith ('\"') and val.startswith('"'):
                val = val[1:-1]

            values[key] = val

    paths = values.get("depot-paths")
    if not paths:
        paths = values.get("depot-path")
    if paths:
        values['depot-paths'] = paths.split(',')
    return values

def gitBranchExists(branch):
    proc = subprocess.Popen(["git", "rev-parse", branch],
                            stderr=subprocess.PIPE, stdout=subprocess.PIPE);
    return proc.wait() == 0;

_gitConfig = {}
def gitConfig(key, args = None): # set args to "--bool", for instance
    if not _gitConfig.has_key(key):
        argsFilter = ""
        if args != None:
            argsFilter = "%s " % args
        cmd = "git config %s%s" % (argsFilter, key)
        _gitConfig[key] = read_pipe(cmd, ignore_error=True).strip()
    return _gitConfig[key]

def gitConfigList(key):
    if not _gitConfig.has_key(key):
        _gitConfig[key] = read_pipe("git config --get-all %s" % key, ignore_error=True).strip().split(os.linesep)
    return _gitConfig[key]

def p4BranchesInGit(branchesAreInRemotes = True):
    branches = {}

    cmdline = "git rev-parse --symbolic "
    if branchesAreInRemotes:
        cmdline += " --remotes"
    else:
        cmdline += " --branches"

    for line in read_pipe_lines(cmdline):
        line = line.strip()

        ## only import to p4/
        if not line.startswith('p4/') or line == "p4/HEAD":
            continue
        branch = line

        # strip off p4
        branch = re.sub ("^p4/", "", line)

        branches[branch] = parseRevision(line)
    return branches

def findUpstreamBranchPoint(head = "HEAD"):
    branches = p4BranchesInGit()
    # map from depot-path to branch name
    branchByDepotPath = {}
    for branch in branches.keys():
        tip = branches[branch]
        log = extractLogMessageFromGitCommit(tip)
        settings = extractSettingsGitLog(log)
        if settings.has_key("depot-paths"):
            paths = ",".join(settings["depot-paths"])
            branchByDepotPath[paths] = "remotes/p4/" + branch

    settings = None
    parent = 0
    while parent < 65535:
        commit = head + "~%s" % parent
        log = extractLogMessageFromGitCommit(commit)
        settings = extractSettingsGitLog(log)
        if settings.has_key("depot-paths"):
            paths = ",".join(settings["depot-paths"])
            if branchByDepotPath.has_key(paths):
                return [branchByDepotPath[paths], settings]

        parent = parent + 1

    return ["", settings]

def createOrUpdateBranchesFromOrigin(localRefPrefix = "refs/remotes/p4/", silent=True):
    if not silent:
        print ("Creating/updating branch(es) in %s based on origin branch(es)"
               % localRefPrefix)

    originPrefix = "origin/p4/"

    for line in read_pipe_lines("git rev-parse --symbolic --remotes"):
        line = line.strip()
        if (not line.startswith(originPrefix)) or line.endswith("HEAD"):
            continue

        headName = line[len(originPrefix):]
        remoteHead = localRefPrefix + headName
        originHead = line

        original = extractSettingsGitLog(extractLogMessageFromGitCommit(originHead))
        if (not original.has_key('depot-paths')
            or not original.has_key('change')):
            continue

        update = False
        if not gitBranchExists(remoteHead):
            if verbose:
                print "creating %s" % remoteHead
            update = True
        else:
            settings = extractSettingsGitLog(extractLogMessageFromGitCommit(remoteHead))
            if settings.has_key('change') > 0:
                if settings['depot-paths'] == original['depot-paths']:
                    originP4Change = int(original['change'])
                    p4Change = int(settings['change'])
                    if originP4Change > p4Change:
                        print ("%s (%s) is newer than %s (%s). "
                               "Updating p4 branch from origin."
                               % (originHead, originP4Change,
                                  remoteHead, p4Change))
                        update = True
                else:
                    print ("Ignoring: %s was imported from %s while "
                           "%s was imported from %s"
                           % (originHead, ','.join(original['depot-paths']),
                              remoteHead, ','.join(settings['depot-paths'])))

        if update:
            system("git update-ref %s %s" % (remoteHead, originHead))

def originP4BranchesExist():
        return gitBranchExists("origin") or gitBranchExists("origin/p4") or gitBranchExists("origin/p4/master")

def p4ChangesForPaths(depotPaths, changeRange):
    assert depotPaths
    cmd = ['changes']
    for p in depotPaths:
        cmd += ["%s...%s" % (p, changeRange)]
    output = p4_read_pipe_lines(cmd)

    changes = {}
    for line in output:
        changeNum = int(line.split(" ")[1])
        changes[changeNum] = True

    changelist = changes.keys()
    changelist.sort()
    return changelist

def p4PathStartsWith(path, prefix):
    # This method tries to remedy a potential mixed-case issue:
    #
    # If UserA adds  //depot/DirA/file1
    # and UserB adds //depot/dira/file2
    #
    # we may or may not have a problem. If you have core.ignorecase=true,
    # we treat DirA and dira as the same directory
    ignorecase = gitConfig("core.ignorecase", "--bool") == "true"
    if ignorecase:
        return path.lower().startswith(prefix.lower())
    return path.startswith(prefix)

class Command:
    def __init__(self):
        self.usage = "usage: %prog [options]"
        self.needsGit = True

class P4UserMap:
    def __init__(self):
        self.userMapFromPerforceServer = False

    def getUserCacheFilename(self):
        home = os.environ.get("HOME", os.environ.get("USERPROFILE"))
        return home + "/.gitp4-usercache.txt"

    def getUserMapFromPerforceServer(self):
        if self.userMapFromPerforceServer:
            return
        self.users = {}
        self.emails = {}

        for output in p4CmdList("users"):
            if not output.has_key("User"):
                continue
            self.users[output["User"]] = output["FullName"] + " <" + output["Email"] + ">"
            self.emails[output["Email"]] = output["User"]


        s = ''
        for (key, val) in self.users.items():
            s += "%s\t%s\n" % (key.expandtabs(1), val.expandtabs(1))

        open(self.getUserCacheFilename(), "wb").write(s)
        self.userMapFromPerforceServer = True

    def loadUserMapFromCache(self):
        self.users = {}
        self.userMapFromPerforceServer = False
        try:
            cache = open(self.getUserCacheFilename(), "rb")
            lines = cache.readlines()
            cache.close()
            for line in lines:
                entry = line.strip().split("\t")
                self.users[entry[0]] = entry[1]
        except IOError:
            self.getUserMapFromPerforceServer()

class P4Debug(Command):
    def __init__(self):
        Command.__init__(self)
        self.options = [
            optparse.make_option("--verbose", dest="verbose", action="store_true",
                                 default=False),
            ]
        self.description = "A tool to debug the output of p4 -G."
        self.needsGit = False
        self.verbose = False

    def run(self, args):
        j = 0
        for output in p4CmdList(args):
            print 'Element: %d' % j
            j += 1
            print output
        return True

class P4RollBack(Command):
    def __init__(self):
        Command.__init__(self)
        self.options = [
            optparse.make_option("--verbose", dest="verbose", action="store_true"),
            optparse.make_option("--local", dest="rollbackLocalBranches", action="store_true")
        ]
        self.description = "A tool to debug the multi-branch import. Don't use :)"
        self.verbose = False
        self.rollbackLocalBranches = False

    def run(self, args):
        if len(args) != 1:
            return False
        maxChange = int(args[0])

        if "p4ExitCode" in p4Cmd("changes -m 1"):
            die("Problems executing p4");

        if self.rollbackLocalBranches:
            refPrefix = "refs/heads/"
            lines = read_pipe_lines("git rev-parse --symbolic --branches")
        else:
            refPrefix = "refs/remotes/"
            lines = read_pipe_lines("git rev-parse --symbolic --remotes")

        for line in lines:
            if self.rollbackLocalBranches or (line.startswith("p4/") and line != "p4/HEAD\n"):
                line = line.strip()
                ref = refPrefix + line
                log = extractLogMessageFromGitCommit(ref)
                settings = extractSettingsGitLog(log)

                depotPaths = settings['depot-paths']
                change = settings['change']

                changed = False

                if len(p4Cmd("changes -m 1 "  + ' '.join (['%s...@%s' % (p, maxChange)
                                                           for p in depotPaths]))) == 0:
                    print "Branch %s did not exist at change %s, deleting." % (ref, maxChange)
                    system("git update-ref -d %s `git rev-parse %s`" % (ref, ref))
                    continue

                while change and int(change) > maxChange:
                    changed = True
                    if self.verbose:
                        print "%s is at %s ; rewinding towards %s" % (ref, change, maxChange)
                    system("git update-ref %s \"%s^\"" % (ref, ref))
                    log = extractLogMessageFromGitCommit(ref)
                    settings =  extractSettingsGitLog(log)


                    depotPaths = settings['depot-paths']
                    change = settings['change']

                if changed:
                    print "%s rewound to %s" % (ref, change)

        return True

class P4Submit(Command, P4UserMap):
    def __init__(self):
        Command.__init__(self)
        P4UserMap.__init__(self)
        self.options = [
                optparse.make_option("--verbose", dest="verbose", action="store_true"),
                optparse.make_option("--origin", dest="origin"),
                optparse.make_option("-M", dest="detectRenames", action="store_true"),
                # preserve the user, requires relevant p4 permissions
                optparse.make_option("--preserve-user", dest="preserveUser", action="store_true"),
        ]
        self.description = "Submit changes from git to the perforce depot."
        self.usage += " [name of git branch to submit into perforce depot]"
        self.interactive = True
        self.origin = ""
        self.detectRenames = False
        self.verbose = False
        self.preserveUser = gitConfig("git-p4.preserveUser").lower() == "true"
        self.isWindows = (platform.system() == "Windows")
        self.myP4UserId = None

    def check(self):
        if len(p4CmdList("opened ...")) > 0:
            die("You have files opened with perforce! Close them before starting the sync.")

    # replaces everything between 'Description:' and the next P4 submit template field with the
    # commit message
    def prepareLogMessage(self, template, message):
        result = ""

        inDescriptionSection = False

        for line in template.split("\n"):
            if line.startswith("#"):
                result += line + "\n"
                continue

            if inDescriptionSection:
                if line.startswith("Files:") or line.startswith("Jobs:"):
                    inDescriptionSection = False
                else:
                    continue
            else:
                if line.startswith("Description:"):
                    inDescriptionSection = True
                    line += "\n"
                    for messageLine in message.split("\n"):
                        line += "\t" + messageLine + "\n"

            result += line + "\n"

        return result

    def p4UserForCommit(self,id):
        # Return the tuple (perforce user,git email) for a given git commit id
        self.getUserMapFromPerforceServer()
        gitEmail = read_pipe("git log --max-count=1 --format='%%ae' %s" % id)
        gitEmail = gitEmail.strip()
        if not self.emails.has_key(gitEmail):
            return (None,gitEmail)
        else:
            return (self.emails[gitEmail],gitEmail)

    def checkValidP4Users(self,commits):
        # check if any git authors cannot be mapped to p4 users
        for id in commits:
            (user,email) = self.p4UserForCommit(id)
            if not user:
                msg = "Cannot find p4 user for email %s in commit %s." % (email, id)
                if gitConfig('git-p4.allowMissingP4Users').lower() == "true":
                    print "%s" % msg
                else:
                    die("Error: %s\nSet git-p4.allowMissingP4Users to true to allow this." % msg)

    def lastP4Changelist(self):
        # Get back the last changelist number submitted in this client spec. This
        # then gets used to patch up the username in the change. If the same
        # client spec is being used by multiple processes then this might go
        # wrong.
        results = p4CmdList("client -o")        # find the current client
        client = None
        for r in results:
            if r.has_key('Client'):
                client = r['Client']
                break
        if not client:
            die("could not get client spec")
        results = p4CmdList(["changes", "-c", client, "-m", "1"])
        for r in results:
            if r.has_key('change'):
                return r['change']
        die("Could not get changelist number for last submit - cannot patch up user details")

    def modifyChangelistUser(self, changelist, newUser):
        # fixup the user field of a changelist after it has been submitted.
        changes = p4CmdList("change -o %s" % changelist)
        if len(changes) != 1:
            die("Bad output from p4 change modifying %s to user %s" %
                (changelist, newUser))

        c = changes[0]
        if c['User'] == newUser: return   # nothing to do
        c['User'] = newUser
        input = marshal.dumps(c)

        result = p4CmdList("change -f -i", stdin=input)
        for r in result:
            if r.has_key('code'):
                if r['code'] == 'error':
                    die("Could not modify user field of changelist %s to %s:%s" % (changelist, newUser, r['data']))
            if r.has_key('data'):
                print("Updated user field for changelist %s to %s" % (changelist, newUser))
                return
        die("Could not modify user field of changelist %s to %s" % (changelist, newUser))

    def canChangeChangelists(self):
        # check to see if we have p4 admin or super-user permissions, either of
        # which are required to modify changelists.
        results = p4CmdList("protects %s" % self.depotPath)
        for r in results:
            if r.has_key('perm'):
                if r['perm'] == 'admin':
                    return 1
                if r['perm'] == 'super':
                    return 1
        return 0

    def p4UserId(self):
        if self.myP4UserId:
            return self.myP4UserId

        results = p4CmdList("user -o")
        for r in results:
            if r.has_key('User'):
                self.myP4UserId = r['User']
                return r['User']
        die("Could not find your p4 user id")

    def p4UserIsMe(self, p4User):
        # return True if the given p4 user is actually me
        me = self.p4UserId()
        if not p4User or p4User != me:
            return False
        else:
            return True

    def prepareSubmitTemplate(self):
        # remove lines in the Files section that show changes to files outside the depot path we're committing into
        template = ""
        inFilesSection = False
        for line in p4_read_pipe_lines(['change', '-o']):
            if line.endswith("\r\n"):
                line = line[:-2] + "\n"
            if inFilesSection:
                if line.startswith("\t"):
                    # path starts and ends with a tab
                    path = line[1:]
                    lastTab = path.rfind("\t")
                    if lastTab != -1:
                        path = path[:lastTab]
                        if not p4PathStartsWith(path, self.depotPath):
                            continue
                else:
                    inFilesSection = False
            else:
                if line.startswith("Files:"):
                    inFilesSection = True

            template += line

        return template

    def edit_template(self, template_file):
        """Invoke the editor to let the user change the submission
           message.  Return true if okay to continue with the submit."""

        # if configured to skip the editing part, just submit
        if gitConfig("git-p4.skipSubmitEdit") == "true":
            return True

        # look at the modification time, to check later if the user saved
        # the file
        mtime = os.stat(template_file).st_mtime

        # invoke the editor
        if os.environ.has_key("P4EDITOR"):
            editor = os.environ.get("P4EDITOR")
        else:
            editor = read_pipe("git var GIT_EDITOR").strip()
        system(editor + " " + template_file)

        # If the file was not saved, prompt to see if this patch should
        # be skipped.  But skip this verification step if configured so.
        if gitConfig("git-p4.skipSubmitEditCheck") == "true":
            return True

        # modification time updated means user saved the file
        if os.stat(template_file).st_mtime > mtime:
            return True

        while True:
            response = raw_input("Submit template unchanged. Submit anyway? [y]es, [n]o (skip this patch) ")
            if response == 'y':
                return True
            if response == 'n':
                return False

    def applyCommit(self, id):
        print "Applying %s" % (read_pipe("git log --max-count=1 --pretty=oneline %s" % id))

        (p4User, gitEmail) = self.p4UserForCommit(id)

        if not self.detectRenames:
            # If not explicitly set check the config variable
            self.detectRenames = gitConfig("git-p4.detectRenames")

        if self.detectRenames.lower() == "false" or self.detectRenames == "":
            diffOpts = ""
        elif self.detectRenames.lower() == "true":
            diffOpts = "-M"
        else:
            diffOpts = "-M%s" % self.detectRenames

        detectCopies = gitConfig("git-p4.detectCopies")
        if detectCopies.lower() == "true":
            diffOpts += " -C"
        elif detectCopies != "" and detectCopies.lower() != "false":
            diffOpts += " -C%s" % detectCopies

        if gitConfig("git-p4.detectCopiesHarder", "--bool") == "true":
            diffOpts += " --find-copies-harder"

        diff = read_pipe_lines("git diff-tree -r %s \"%s^\" \"%s\"" % (diffOpts, id, id))
        filesToAdd = set()
        filesToDelete = set()
        editedFiles = set()
        filesToChangeExecBit = {}
        for line in diff:
            diff = parseDiffTreeEntry(line)
            modifier = diff['status']
            path = diff['src']
            if modifier == "M":
                p4_edit(path)
                if isModeExecChanged(diff['src_mode'], diff['dst_mode']):
                    filesToChangeExecBit[path] = diff['dst_mode']
                editedFiles.add(path)
            elif modifier == "A":
                filesToAdd.add(path)
                filesToChangeExecBit[path] = diff['dst_mode']
                if path in filesToDelete:
                    filesToDelete.remove(path)
            elif modifier == "D":
                filesToDelete.add(path)
                if path in filesToAdd:
                    filesToAdd.remove(path)
            elif modifier == "C":
                src, dest = diff['src'], diff['dst']
                p4_integrate(src, dest)
                if diff['src_sha1'] != diff['dst_sha1']:
                    p4_edit(dest)
                if isModeExecChanged(diff['src_mode'], diff['dst_mode']):
                    p4_edit(dest)
                    filesToChangeExecBit[dest] = diff['dst_mode']
                os.unlink(dest)
                editedFiles.add(dest)
            elif modifier == "R":
                src, dest = diff['src'], diff['dst']
                p4_integrate(src, dest)
                if diff['src_sha1'] != diff['dst_sha1']:
                    p4_edit(dest)
                if isModeExecChanged(diff['src_mode'], diff['dst_mode']):
                    p4_edit(dest)
                    filesToChangeExecBit[dest] = diff['dst_mode']
                os.unlink(dest)
                editedFiles.add(dest)
                filesToDelete.add(src)
            else:
                die("unknown modifier %s for %s" % (modifier, path))

        diffcmd = "git format-patch -k --stdout \"%s^\"..\"%s\"" % (id, id)
        patchcmd = diffcmd + " | git apply "
        tryPatchCmd = patchcmd + "--check -"
        applyPatchCmd = patchcmd + "--check --apply -"

        if os.system(tryPatchCmd) != 0:
            print "Unfortunately applying the change failed!"
            print "What do you want to do?"
            response = "x"
            while response != "s" and response != "a" and response != "w":
                response = raw_input("[s]kip this patch / [a]pply the patch forcibly "
                                     "and with .rej files / [w]rite the patch to a file (patch.txt) ")
            if response == "s":
                print "Skipping! Good luck with the next patches..."
                for f in editedFiles:
                    p4_revert(f)
                for f in filesToAdd:
                    os.remove(f)
                return
            elif response == "a":
                os.system(applyPatchCmd)
                if len(filesToAdd) > 0:
                    print "You may also want to call p4 add on the following files:"
                    print " ".join(filesToAdd)
                if len(filesToDelete):
                    print "The following files should be scheduled for deletion with p4 delete:"
                    print " ".join(filesToDelete)
                die("Please resolve and submit the conflict manually and "
                    + "continue afterwards with git-p4 submit --continue")
            elif response == "w":
                system(diffcmd + " > patch.txt")
                print "Patch saved to patch.txt in %s !" % self.clientPath
                die("Please resolve and submit the conflict manually and "
                    "continue afterwards with git-p4 submit --continue")

        system(applyPatchCmd)

        for f in filesToAdd:
            p4_add(f)
        for f in filesToDelete:
            p4_revert(f)
            p4_delete(f)

        # Set/clear executable bits
        for f in filesToChangeExecBit.keys():
            mode = filesToChangeExecBit[f]
            setP4ExecBit(f, mode)

        logMessage = extractLogMessageFromGitCommit(id)
        logMessage = logMessage.strip()

        template = self.prepareSubmitTemplate()

        if self.interactive:
            submitTemplate = self.prepareLogMessage(template, logMessage)

            if self.preserveUser:
               submitTemplate = submitTemplate + ("\n######## Actual user %s, modified after commit\n" % p4User)

            if os.environ.has_key("P4DIFF"):
                del(os.environ["P4DIFF"])
            diff = ""
            for editedFile in editedFiles:
                diff += p4_read_pipe(['diff', '-du', editedFile])

            newdiff = ""
            for newFile in filesToAdd:
                newdiff += "==== new file ====\n"
                newdiff += "--- /dev/null\n"
                newdiff += "+++ %s\n" % newFile
                f = open(newFile, "r")
                for line in f.readlines():
                    newdiff += "+" + line
                f.close()

            if self.checkAuthorship and not self.p4UserIsMe(p4User):
                submitTemplate += "######## git author %s does not match your p4 account.\n" % gitEmail
                submitTemplate += "######## Use git-p4 option --preserve-user to modify authorship\n"
                submitTemplate += "######## Use git-p4 config git-p4.skipUserNameCheck hides this message.\n"

            separatorLine = "######## everything below this line is just the diff #######\n"

            (handle, fileName) = tempfile.mkstemp()
            tmpFile = os.fdopen(handle, "w+")
            if self.isWindows:
                submitTemplate = submitTemplate.replace("\n", "\r\n")
                separatorLine = separatorLine.replace("\n", "\r\n")
                newdiff = newdiff.replace("\n", "\r\n")
            tmpFile.write(submitTemplate + separatorLine + diff + newdiff)
            tmpFile.close()

            if self.edit_template(fileName):
                # read the edited message and submit
                tmpFile = open(fileName, "rb")
                message = tmpFile.read()
                tmpFile.close()
                submitTemplate = message[:message.index(separatorLine)]
                if self.isWindows:
                    submitTemplate = submitTemplate.replace("\r\n", "\n")
                p4_write_pipe(['submit', '-i'], submitTemplate)

                if self.preserveUser:
                    if p4User:
                        # Get last changelist number. Cannot easily get it from
                        # the submit command output as the output is
                        # unmarshalled.
                        changelist = self.lastP4Changelist()
                        self.modifyChangelistUser(changelist, p4User)
            else:
                # skip this patch
                print "Submission cancelled, undoing p4 changes."
                for f in editedFiles:
                    p4_revert(f)
                for f in filesToAdd:
                    p4_revert(f)
                    os.remove(f)

            os.remove(fileName)
        else:
            fileName = "submit.txt"
            file = open(fileName, "w+")
            file.write(self.prepareLogMessage(template, logMessage))
            file.close()
            print ("Perforce submit template written as %s. "
                   + "Please review/edit and then use p4 submit -i < %s to submit directly!"
                   % (fileName, fileName))

    def run(self, args):
        if len(args) == 0:
            self.master = currentGitBranch()
            if len(self.master) == 0 or not gitBranchExists("refs/heads/%s" % self.master):
                die("Detecting current git branch failed!")
        elif len(args) == 1:
            self.master = args[0]
            if not branchExists(self.master):
                die("Branch %s does not exist" % self.master)
        else:
            return False

        allowSubmit = gitConfig("git-p4.allowSubmit")
        if len(allowSubmit) > 0 and not self.master in allowSubmit.split(","):
            die("%s is not in git-p4.allowSubmit" % self.master)

        [upstream, settings] = findUpstreamBranchPoint()
        self.depotPath = settings['depot-paths'][0]
        if len(self.origin) == 0:
            self.origin = upstream

        if self.preserveUser:
            if not self.canChangeChangelists():
                die("Cannot preserve user names without p4 super-user or admin permissions")

        if self.verbose:
            print "Origin branch is " + self.origin

        if len(self.depotPath) == 0:
            print "Internal error: cannot locate perforce depot path from existing branches"
            sys.exit(128)

        self.clientPath = p4Where(self.depotPath)

        if len(self.clientPath) == 0:
            print "Error: Cannot locate perforce checkout of %s in client view" % self.depotPath
            sys.exit(128)

        print "Perforce checkout for depot path %s located at %s" % (self.depotPath, self.clientPath)
        self.oldWorkingDirectory = os.getcwd()

        # ensure the clientPath exists
        if not os.path.exists(self.clientPath):
            os.makedirs(self.clientPath)

        chdir(self.clientPath)
        print "Synchronizing p4 checkout..."
        p4_sync("...")
        self.check()

        commits = []
        for line in read_pipe_lines("git rev-list --no-merges %s..%s" % (self.origin, self.master)):
            commits.append(line.strip())
        commits.reverse()

        if self.preserveUser or (gitConfig("git-p4.skipUserNameCheck") == "true"):
            self.checkAuthorship = False
        else:
            self.checkAuthorship = True

        if self.preserveUser:
            self.checkValidP4Users(commits)

        while len(commits) > 0:
            commit = commits[0]
            commits = commits[1:]
            self.applyCommit(commit)
            if not self.interactive:
                break

        if len(commits) == 0:
            print "All changes applied!"
            chdir(self.oldWorkingDirectory)

            sync = P4Sync()
            sync.run([])

            rebase = P4Rebase()
            rebase.rebase()

        return True

class View(object):
    """Represent a p4 view ("p4 help views"), and map files in a
       repo according to the view."""

    class Path(object):
        """A depot or client path, possibly containing wildcards.
           The only one supported is ... at the end, currently.
           Initialize with the full path, with //depot or //client."""

        def __init__(self, path, is_depot):
            self.path = path
            self.is_depot = is_depot
            self.find_wildcards()
            # remember the prefix bit, useful for relative mappings
            m = re.match("(//[^/]+/)", self.path)
            if not m:
                die("Path %s does not start with //prefix/" % self.path)
            prefix = m.group(1)
            if not self.is_depot:
                # strip //client/ on client paths
                self.path = self.path[len(prefix):]

        def find_wildcards(self):
            """Make sure wildcards are valid, and set up internal
               variables."""

            self.ends_triple_dot = False
            # There are three wildcards allowed in p4 views
            # (see "p4 help views").  This code knows how to
            # handle "..." (only at the end), but cannot deal with
            # "%%n" or "*".  Only check the depot_side, as p4 should
            # validate that the client_side matches too.
            if re.search(r'%%[1-9]', self.path):
                die("Can't handle %%n wildcards in view: %s" % self.path)
            if self.path.find("*") >= 0:
                die("Can't handle * wildcards in view: %s" % self.path)
            triple_dot_index = self.path.find("...")
            if triple_dot_index >= 0:
                if not self.path.endswith("..."):
                    die("Can handle ... wildcard only at end of path: %s" %
                        self.path)
                self.ends_triple_dot = True

        def ensure_compatible(self, other_path):
            """Make sure the wildcards agree."""
            if self.ends_triple_dot != other_path.ends_triple_dot:
                 die("Both paths must end with ... if either does;\n" +
                     "paths: %s %s" % (self.path, other_path.path))

        def match_wildcards(self, test_path):
            """See if this test_path matches us, and fill in the value
               of the wildcards if so.  Returns a tuple of
               (True|False, wildcards[]).  For now, only the ... at end
               is supported, so at most one wildcard."""
            if self.ends_triple_dot:
                dotless = self.path[:-3]
                if test_path.startswith(dotless):
                    wildcard = test_path[len(dotless):]
                    return (True, [ wildcard ])
            else:
                if test_path == self.path:
                    return (True, [])
            return (False, [])

        def match(self, test_path):
            """Just return if it matches; don't bother with the wildcards."""
            b, _ = self.match_wildcards(test_path)
            return b

        def fill_in_wildcards(self, wildcards):
            """Return the relative path, with the wildcards filled in
               if there are any."""
            if self.ends_triple_dot:
                return self.path[:-3] + wildcards[0]
            else:
                return self.path

    class Mapping(object):
        def __init__(self, depot_side, client_side, overlay, exclude):
            # depot_side is without the trailing /... if it had one
            self.depot_side = View.Path(depot_side, is_depot=True)
            self.client_side = View.Path(client_side, is_depot=False)
            self.overlay = overlay  # started with "+"
            self.exclude = exclude  # started with "-"
            assert not (self.overlay and self.exclude)
            self.depot_side.ensure_compatible(self.client_side)

        def __str__(self):
            c = " "
            if self.overlay:
                c = "+"
            if self.exclude:
                c = "-"
            return "View.Mapping: %s%s -> %s" % \
                   (c, self.depot_side, self.client_side)

        def map_depot_to_client(self, depot_path):
            """Calculate the client path if using this mapping on the
               given depot path; does not consider the effect of other
               mappings in a view.  Even excluded mappings are returned."""
            matches, wildcards = self.depot_side.match_wildcards(depot_path)
            if not matches:
                return ""
            client_path = self.client_side.fill_in_wildcards(wildcards)
            return client_path

    #
    # View methods
    #
    def __init__(self):
        self.mappings = []

    def append(self, view_line):
        """Parse a view line, splitting it into depot and client
           sides.  Append to self.mappings, preserving order."""

        # Split the view line into exactly two words.  P4 enforces
        # structure on these lines that simplifies this quite a bit.
        #
        # Either or both words may be double-quoted.
        # Single quotes do not matter.
        # Double-quote marks cannot occur inside the words.
        # A + or - prefix is also inside the quotes.
        # There are no quotes unless they contain a space.
        # The line is already white-space stripped.
        # The two words are separated by a single space.
        #
        if view_line[0] == '"':
            # First word is double quoted.  Find its end.
            close_quote_index = view_line.find('"', 1)
            if close_quote_index <= 0:
                die("No first-word closing quote found: %s" % view_line)
            depot_side = view_line[1:close_quote_index]
            # skip closing quote and space
            rhs_index = close_quote_index + 1 + 1
        else:
            space_index = view_line.find(" ")
            if space_index <= 0:
                die("No word-splitting space found: %s" % view_line)
            depot_side = view_line[0:space_index]
            rhs_index = space_index + 1

        if view_line[rhs_index] == '"':
            # Second word is double quoted.  Make sure there is a
            # double quote at the end too.
            if not view_line.endswith('"'):
                die("View line with rhs quote should end with one: %s" %
                    view_line)
            # skip the quotes
            client_side = view_line[rhs_index+1:-1]
        else:
            client_side = view_line[rhs_index:]

        # prefix + means overlay on previous mapping
        overlay = False
        if depot_side.startswith("+"):
            overlay = True
            depot_side = depot_side[1:]

        # prefix - means exclude this path
        exclude = False
        if depot_side.startswith("-"):
            exclude = True
            depot_side = depot_side[1:]

        m = View.Mapping(depot_side, client_side, overlay, exclude)
        self.mappings.append(m)

    def map_in_client(self, depot_path):
        """Return the relative location in the client where this
           depot file should live.  Returns "" if the file should
           not be mapped in the client."""

        paths_filled = []
        client_path = ""

        # look at later entries first
        for m in self.mappings[::-1]:

            # see where will this path end up in the client
            p = m.map_depot_to_client(depot_path)

            if p == "":
                # Depot path does not belong in client.  Must remember
                # this, as previous items should not cause files to
                # exist in this path either.  Remember that the list is
                # being walked from the end, which has higher precedence.
                # Overlap mappings do not exclude previous mappings.
                if not m.overlay:
                    paths_filled.append(m.client_side)

            else:
                # This mapping matched; no need to search any further.
                # But, the mapping could be rejected if the client path
                # has already been claimed by an earlier mapping.
                already_mapped_in_client = False
                for f in paths_filled:
                    # this is View.Path.match
                    if f.match(p):
                        already_mapped_in_client = True
                        break
                if not already_mapped_in_client:
                    # Include this file, unless it is from a line that
                    # explicitly said to exclude it.
                    if not m.exclude:
                        client_path = p

                # a match, even if rejected, always stops the search
                break

        return client_path

class P4Sync(Command, P4UserMap):
    delete_actions = ( "delete", "move/delete", "purge" )

    def __init__(self):
        Command.__init__(self)
        P4UserMap.__init__(self)
        self.options = [
                optparse.make_option("--branch", dest="branch"),
                optparse.make_option("--detect-branches", dest="detectBranches", action="store_true"),
                optparse.make_option("--changesfile", dest="changesFile"),
                optparse.make_option("--silent", dest="silent", action="store_true"),
                optparse.make_option("--detect-labels", dest="detectLabels", action="store_true"),
                optparse.make_option("--verbose", dest="verbose", action="store_true"),
                optparse.make_option("--import-local", dest="importIntoRemotes", action="store_false",
                                     help="Import into refs/heads/ , not refs/remotes"),
                optparse.make_option("--max-changes", dest="maxChanges"),
                optparse.make_option("--keep-path", dest="keepRepoPath", action='store_true',
                                     help="Keep entire BRANCH/DIR/SUBDIR prefix during import"),
                optparse.make_option("--use-client-spec", dest="useClientSpec", action='store_true',
                                     help="Only sync files that are included in the Perforce Client Spec")
        ]
        self.description = """Imports from Perforce into a git repository.\n
    example:
    //depot/my/project/ -- to import the current head
    //depot/my/project/@all -- to import everything
    //depot/my/project/@1,6 -- to import only from revision 1 to 6

    (a ... is not needed in the path p4 specification, it's added implicitly)"""

        self.usage += " //depot/path[@revRange]"
        self.silent = False
        self.createdBranches = set()
        self.committedChanges = set()
        self.branch = ""
        self.detectBranches = False
        self.detectLabels = False
        self.changesFile = ""
        self.syncWithOrigin = True
        self.verbose = False
        self.importIntoRemotes = True
        self.maxChanges = ""
        self.isWindows = (platform.system() == "Windows")
        self.keepRepoPath = False
        self.depotPaths = None
        self.p4BranchesInGit = []
        self.cloneExclude = []
        self.useClientSpec = False
        self.useClientSpec_from_options = False
        self.clientSpecDirs = None

        if gitConfig("git-p4.syncFromOrigin") == "false":
            self.syncWithOrigin = False

    #
    # P4 wildcards are not allowed in filenames.  P4 complains
    # if you simply add them, but you can force it with "-f", in
    # which case it translates them into %xx encoding internally.
    # Search for and fix just these four characters.  Do % last so
    # that fixing it does not inadvertently create new %-escapes.
    #
    def wildcard_decode(self, path):
        # Cannot have * in a filename in windows; untested as to
        # what p4 would do in such a case.
        if not self.isWindows:
            path = path.replace("%2A", "*")
        path = path.replace("%23", "#") \
                   .replace("%40", "@") \
                   .replace("%25", "%")
        return path

    def extractFilesFromCommit(self, commit):
        self.cloneExclude = [re.sub(r"\.\.\.$", "", path)
                             for path in self.cloneExclude]
        files = []
        fnum = 0
        while commit.has_key("depotFile%s" % fnum):
            path =  commit["depotFile%s" % fnum]

            if [p for p in self.cloneExclude
                if p4PathStartsWith(path, p)]:
                found = False
            else:
                found = [p for p in self.depotPaths
                         if p4PathStartsWith(path, p)]
            if not found:
                fnum = fnum + 1
                continue

            file = {}
            file["path"] = path
            file["rev"] = commit["rev%s" % fnum]
            file["action"] = commit["action%s" % fnum]
            file["type"] = commit["type%s" % fnum]
            files.append(file)
            fnum = fnum + 1
        return files

    def stripRepoPath(self, path, prefixes):
        if self.useClientSpec:
            return self.clientSpecDirs.map_in_client(path)

        if self.keepRepoPath:
            prefixes = [re.sub("^(//[^/]+/).*", r'\1', prefixes[0])]

        for p in prefixes:
            if p4PathStartsWith(path, p):
                path = path[len(p):]

        return path

    def splitFilesIntoBranches(self, commit):
        branches = {}
        fnum = 0
        while commit.has_key("depotFile%s" % fnum):
            path =  commit["depotFile%s" % fnum]
            found = [p for p in self.depotPaths
                     if p4PathStartsWith(path, p)]
            if not found:
                fnum = fnum + 1
                continue

            file = {}
            file["path"] = path
            file["rev"] = commit["rev%s" % fnum]
            file["action"] = commit["action%s" % fnum]
            file["type"] = commit["type%s" % fnum]
            fnum = fnum + 1

            relPath = self.stripRepoPath(path, self.depotPaths)

            for branch in self.knownBranches.keys():

                # add a trailing slash so that a commit into qt/4.2foo doesn't end up in qt/4.2
                if relPath.startswith(branch + "/"):
                    if branch not in branches:
                        branches[branch] = []
                    branches[branch].append(file)
                    break

        return branches

    # output one file from the P4 stream
    # - helper for streamP4Files

    def streamOneP4File(self, file, contents):
        relPath = self.stripRepoPath(file['depotFile'], self.branchPrefixes)
        relPath = self.wildcard_decode(relPath)
        if verbose:
            sys.stderr.write("%s\n" % relPath)

        (type_base, type_mods) = split_p4_type(file["type"])

        git_mode = "100644"
        if "x" in type_mods:
            git_mode = "100755"
        if type_base == "symlink":
            git_mode = "120000"
            # p4 print on a symlink contains "target\n"; remove the newline
            data = ''.join(contents)
            contents = [data[:-1]]

        if type_base == "utf16":
            # p4 delivers different text in the python output to -G
            # than it does when using "print -o", or normal p4 client
            # operations.  utf16 is converted to ascii or utf8, perhaps.
            # But ascii text saved as -t utf16 is completely mangled.
            # Invoke print -o to get the real contents.
            text = p4_read_pipe(['print', '-q', '-o', '-', file['depotFile']])
            contents = [ text ]

        if type_base == "apple":
            # Apple filetype files will be streamed as a concatenation of
            # its appledouble header and the contents.  This is useless
            # on both macs and non-macs.  If using "print -q -o xx", it
            # will create "xx" with the data, and "%xx" with the header.
            # This is also not very useful.
            #
            # Ideally, someday, this script can learn how to generate
            # appledouble files directly and import those to git, but
            # non-mac machines can never find a use for apple filetype.
            print "\nIgnoring apple filetype file %s" % file['depotFile']
            return

        # Perhaps windows wants unicode, utf16 newlines translated too;
        # but this is not doing it.
        if self.isWindows and type_base == "text":
            mangled = []
            for data in contents:
                data = data.replace("\r\n", "\n")
                mangled.append(data)
            contents = mangled

        # Note that we do not try to de-mangle keywords on utf16 files,
        # even though in theory somebody may want that.
        if type_base in ("text", "unicode", "binary"):
            if "ko" in type_mods:
                text = ''.join(contents)
                text = re.sub(r'\$(Id|Header):[^$]*\$', r'$\1$', text)
                contents = [ text ]
            elif "k" in type_mods:
                text = ''.join(contents)
                text = re.sub(r'\$(Id|Header|Author|Date|DateTime|Change|File|Revision):[^$]*\$', r'$\1$', text)
                contents = [ text ]

        self.gitStream.write("M %s inline %s\n" % (git_mode, relPath))

        # total length...
        length = 0
        for d in contents:
            length = length + len(d)

        self.gitStream.write("data %d\n" % length)
        for d in contents:
            self.gitStream.write(d)
        self.gitStream.write("\n")

    def streamOneP4Deletion(self, file):
        relPath = self.stripRepoPath(file['path'], self.branchPrefixes)
        if verbose:
            sys.stderr.write("delete %s\n" % relPath)
        self.gitStream.write("D %s\n" % relPath)

    # handle another chunk of streaming data
    def streamP4FilesCb(self, marshalled):

        if marshalled.has_key('depotFile') and self.stream_have_file_info:
            # start of a new file - output the old one first
            self.streamOneP4File(self.stream_file, self.stream_contents)
            self.stream_file = {}
            self.stream_contents = []
            self.stream_have_file_info = False

        # pick up the new file information... for the
        # 'data' field we need to append to our array
        for k in marshalled.keys():
            if k == 'data':
                self.stream_contents.append(marshalled['data'])
            else:
                self.stream_file[k] = marshalled[k]

        self.stream_have_file_info = True

    # Stream directly from "p4 files" into "git fast-import"
    def streamP4Files(self, files):
        filesForCommit = []
        filesToRead = []
        filesToDelete = []

        for f in files:
            # if using a client spec, only add the files that have
            # a path in the client
            if self.clientSpecDirs:
                if self.clientSpecDirs.map_in_client(f['path']) == "":
                    continue

            filesForCommit.append(f)
            if f['action'] in self.delete_actions:
                filesToDelete.append(f)
            else:
                filesToRead.append(f)

        # deleted files...
        for f in filesToDelete:
            self.streamOneP4Deletion(f)

        if len(filesToRead) > 0:
            self.stream_file = {}
            self.stream_contents = []
            self.stream_have_file_info = False

            # curry self argument
            def streamP4FilesCbSelf(entry):
                self.streamP4FilesCb(entry)

            fileArgs = ['%s#%s' % (f['path'], f['rev']) for f in filesToRead]

            p4CmdList(["-x", "-", "print"],
                      stdin=fileArgs,
                      cb=streamP4FilesCbSelf)

            # do the last chunk
            if self.stream_file.has_key('depotFile'):
                self.streamOneP4File(self.stream_file, self.stream_contents)

    def commit(self, details, files, branch, branchPrefixes, parent = ""):
        epoch = details["time"]
        author = details["user"]
        self.branchPrefixes = branchPrefixes

        if self.verbose:
            print "commit into %s" % branch

        # start with reading files; if that fails, we should not
        # create a commit.
        new_files = []
        for f in files:
            if [p for p in branchPrefixes if p4PathStartsWith(f['path'], p)]:
                new_files.append (f)
            else:
                sys.stderr.write("Ignoring file outside of prefix: %s\n" % f['path'])

        self.gitStream.write("commit %s\n" % branch)
#        gitStream.write("mark :%s\n" % details["change"])
        self.committedChanges.add(int(details["change"]))
        committer = ""
        if author not in self.users:
            self.getUserMapFromPerforceServer()
        if author in self.users:
            committer = "%s %s %s" % (self.users[author], epoch, self.tz)
        else:
            committer = "%s <a@b> %s %s" % (author, epoch, self.tz)

        self.gitStream.write("committer %s\n" % committer)

        self.gitStream.write("data <<EOT\n")
        self.gitStream.write(details["desc"])
        self.gitStream.write("\n[git-p4: depot-paths = \"%s\": change = %s"
                             % (','.join (branchPrefixes), details["change"]))
        if len(details['options']) > 0:
            self.gitStream.write(": options = %s" % details['options'])
        self.gitStream.write("]\nEOT\n\n")

        if len(parent) > 0:
            if self.verbose:
                print "parent %s" % parent
            self.gitStream.write("from %s\n" % parent)

        self.streamP4Files(new_files)
        self.gitStream.write("\n")

        change = int(details["change"])

        if self.labels.has_key(change):
            label = self.labels[change]
            labelDetails = label[0]
            labelRevisions = label[1]
            if self.verbose:
                print "Change %s is labelled %s" % (change, labelDetails)

            files = p4CmdList(["files"] + ["%s...@%s" % (p, change)
                                                    for p in branchPrefixes])

            if len(files) == len(labelRevisions):

                cleanedFiles = {}
                for info in files:
                    if info["action"] in self.delete_actions:
                        continue
                    cleanedFiles[info["depotFile"]] = info["rev"]

                if cleanedFiles == labelRevisions:
                    self.gitStream.write("tag tag_%s\n" % labelDetails["label"])
                    self.gitStream.write("from %s\n" % branch)

                    owner = labelDetails["Owner"]
                    tagger = ""
                    if author in self.users:
                        tagger = "%s %s %s" % (self.users[owner], epoch, self.tz)
                    else:
                        tagger = "%s <a@b> %s %s" % (owner, epoch, self.tz)
                    self.gitStream.write("tagger %s\n" % tagger)
                    self.gitStream.write("data <<EOT\n")
                    self.gitStream.write(labelDetails["Description"])
                    self.gitStream.write("EOT\n\n")

                else:
                    if not self.silent:
                        print ("Tag %s does not match with change %s: files do not match."
                               % (labelDetails["label"], change))

            else:
                if not self.silent:
                    print ("Tag %s does not match with change %s: file count is different."
                           % (labelDetails["label"], change))

    def getLabels(self):
        self.labels = {}

        l = p4CmdList("labels %s..." % ' '.join (self.depotPaths))
        if len(l) > 0 and not self.silent:
            print "Finding files belonging to labels in %s" % `self.depotPaths`

        for output in l:
            label = output["label"]
            revisions = {}
            newestChange = 0
            if self.verbose:
                print "Querying files for label %s" % label
            for file in p4CmdList(["files"] +
                                      ["%s...@%s" % (p, label)
                                          for p in self.depotPaths]):
                revisions[file["depotFile"]] = file["rev"]
                change = int(file["change"])
                if change > newestChange:
                    newestChange = change

            self.labels[newestChange] = [output, revisions]

        if self.verbose:
            print "Label changes: %s" % self.labels.keys()

    def guessProjectName(self):
        for p in self.depotPaths:
            if p.endswith("/"):
                p = p[:-1]
            p = p[p.strip().rfind("/") + 1:]
            if not p.endswith("/"):
               p += "/"
            return p

    def getBranchMapping(self):
        lostAndFoundBranches = set()

        user = gitConfig("git-p4.branchUser")
        if len(user) > 0:
            command = "branches -u %s" % user
        else:
            command = "branches"

        for info in p4CmdList(command):
            details = p4Cmd("branch -o %s" % info["branch"])
            viewIdx = 0
            while details.has_key("View%s" % viewIdx):
                paths = details["View%s" % viewIdx].split(" ")
                viewIdx = viewIdx + 1
                # require standard //depot/foo/... //depot/bar/... mapping
                if len(paths) != 2 or not paths[0].endswith("/...") or not paths[1].endswith("/..."):
                    continue
                source = paths[0]
                destination = paths[1]
                ## HACK
                if p4PathStartsWith(source, self.depotPaths[0]) and p4PathStartsWith(destination, self.depotPaths[0]):
                    source = source[len(self.depotPaths[0]):-4]
                    destination = destination[len(self.depotPaths[0]):-4]

                    if destination in self.knownBranches:
                        if not self.silent:
                            print "p4 branch %s defines a mapping from %s to %s" % (info["branch"], source, destination)
                            print "but there exists another mapping from %s to %s already!" % (self.knownBranches[destination], destination)
                        continue

                    self.knownBranches[destination] = source

                    lostAndFoundBranches.discard(destination)

                    if source not in self.knownBranches:
                        lostAndFoundBranches.add(source)

        # Perforce does not strictly require branches to be defined, so we also
        # check git config for a branch list.
        #
        # Example of branch definition in git config file:
        # [git-p4]
        #   branchList=main:branchA
        #   branchList=main:branchB
        #   branchList=branchA:branchC
        configBranches = gitConfigList("git-p4.branchList")
        for branch in configBranches:
            if branch:
                (source, destination) = branch.split(":")
                self.knownBranches[destination] = source

                lostAndFoundBranches.discard(destination)

                if source not in self.knownBranches:
                    lostAndFoundBranches.add(source)


        for branch in lostAndFoundBranches:
            self.knownBranches[branch] = branch

    def getBranchMappingFromGitBranches(self):
        branches = p4BranchesInGit(self.importIntoRemotes)
        for branch in branches.keys():
            if branch == "master":
                branch = "main"
            else:
                branch = branch[len(self.projectName):]
            self.knownBranches[branch] = branch

    def listExistingP4GitBranches(self):
        # branches holds mapping from name to commit
        branches = p4BranchesInGit(self.importIntoRemotes)
        self.p4BranchesInGit = branches.keys()
        for branch in branches.keys():
            self.initialParents[self.refPrefix + branch] = branches[branch]

    def updateOptionDict(self, d):
        option_keys = {}
        if self.keepRepoPath:
            option_keys['keepRepoPath'] = 1

        d["options"] = ' '.join(sorted(option_keys.keys()))

    def readOptions(self, d):
        self.keepRepoPath = (d.has_key('options')
                             and ('keepRepoPath' in d['options']))

    def gitRefForBranch(self, branch):
        if branch == "main":
            return self.refPrefix + "master"

        if len(branch) <= 0:
            return branch

        return self.refPrefix + self.projectName + branch

    def gitCommitByP4Change(self, ref, change):
        if self.verbose:
            print "looking in ref " + ref + " for change %s using bisect..." % change

        earliestCommit = ""
        latestCommit = parseRevision(ref)

        while True:
            if self.verbose:
                print "trying: earliest %s latest %s" % (earliestCommit, latestCommit)
            next = read_pipe("git rev-list --bisect %s %s" % (latestCommit, earliestCommit)).strip()
            if len(next) == 0:
                if self.verbose:
                    print "argh"
                return ""
            log = extractLogMessageFromGitCommit(next)
            settings = extractSettingsGitLog(log)
            currentChange = int(settings['change'])
            if self.verbose:
                print "current change %s" % currentChange

            if currentChange == change:
                if self.verbose:
                    print "found %s" % next
                return next

            if currentChange < change:
                earliestCommit = "^%s" % next
            else:
                latestCommit = "%s" % next

        return ""

    def importNewBranch(self, branch, maxChange):
        # make fast-import flush all changes to disk and update the refs using the checkpoint
        # command so that we can try to find the branch parent in the git history
        self.gitStream.write("checkpoint\n\n");
        self.gitStream.flush();
        branchPrefix = self.depotPaths[0] + branch + "/"
        range = "@1,%s" % maxChange
        #print "prefix" + branchPrefix
        changes = p4ChangesForPaths([branchPrefix], range)
        if len(changes) <= 0:
            return False
        firstChange = changes[0]
        #print "first change in branch: %s" % firstChange
        sourceBranch = self.knownBranches[branch]
        sourceDepotPath = self.depotPaths[0] + sourceBranch
        sourceRef = self.gitRefForBranch(sourceBranch)
        #print "source " + sourceBranch

        branchParentChange = int(p4Cmd("changes -m 1 %s...@1,%s" % (sourceDepotPath, firstChange))["change"])
        #print "branch parent: %s" % branchParentChange
        gitParent = self.gitCommitByP4Change(sourceRef, branchParentChange)
        if len(gitParent) > 0:
            self.initialParents[self.gitRefForBranch(branch)] = gitParent
            #print "parent git commit: %s" % gitParent

        self.importChanges(changes)
        return True

    def importChanges(self, changes):
        cnt = 1
        for change in changes:
            description = p4Cmd("describe %s" % change)
            self.updateOptionDict(description)

            if not self.silent:
                sys.stdout.write("\rImporting revision %s (%s%%)" % (change, cnt * 100 / len(changes)))
                sys.stdout.flush()
            cnt = cnt + 1

            try:
                if self.detectBranches:
                    branches = self.splitFilesIntoBranches(description)
                    for branch in branches.keys():
                        ## HACK  --hwn
                        branchPrefix = self.depotPaths[0] + branch + "/"

                        parent = ""

                        filesForCommit = branches[branch]

                        if self.verbose:
                            print "branch is %s" % branch

                        self.updatedBranches.add(branch)

                        if branch not in self.createdBranches:
                            self.createdBranches.add(branch)
                            parent = self.knownBranches[branch]
                            if parent == branch:
                                parent = ""
                            else:
                                fullBranch = self.projectName + branch
                                if fullBranch not in self.p4BranchesInGit:
                                    if not self.silent:
                                        print("\n    Importing new branch %s" % fullBranch);
                                    if self.importNewBranch(branch, change - 1):
                                        parent = ""
                                        self.p4BranchesInGit.append(fullBranch)
                                    if not self.silent:
                                        print("\n    Resuming with change %s" % change);

                                if self.verbose:
                                    print "parent determined through known branches: %s" % parent

                        branch = self.gitRefForBranch(branch)
                        parent = self.gitRefForBranch(parent)

                        if self.verbose:
                            print "looking for initial parent for %s; current parent is %s" % (branch, parent)

                        if len(parent) == 0 and branch in self.initialParents:
                            parent = self.initialParents[branch]
                            del self.initialParents[branch]

                        self.commit(description, filesForCommit, branch, [branchPrefix], parent)
                else:
                    files = self.extractFilesFromCommit(description)
                    self.commit(description, files, self.branch, self.depotPaths,
                                self.initialParent)
                    self.initialParent = ""
            except IOError:
                print self.gitError.read()
                sys.exit(1)

    def importHeadRevision(self, revision):
        print "Doing initial import of %s from revision %s into %s" % (' '.join(self.depotPaths), revision, self.branch)

        details = {}
        details["user"] = "git perforce import user"
        details["desc"] = ("Initial import of %s from the state at revision %s\n"
                           % (' '.join(self.depotPaths), revision))
        details["change"] = revision
        newestRevision = 0

        fileCnt = 0
        fileArgs = ["%s...%s" % (p,revision) for p in self.depotPaths]

        for info in p4CmdList(["files"] + fileArgs):

            if 'code' in info and info['code'] == 'error':
                sys.stderr.write("p4 returned an error: %s\n"
                                 % info['data'])
                if info['data'].find("must refer to client") >= 0:
                    sys.stderr.write("This particular p4 error is misleading.\n")
                    sys.stderr.write("Perhaps the depot path was misspelled.\n");
                    sys.stderr.write("Depot path:  %s\n" % " ".join(self.depotPaths))
                sys.exit(1)
            if 'p4ExitCode' in info:
                sys.stderr.write("p4 exitcode: %s\n" % info['p4ExitCode'])
                sys.exit(1)


            change = int(info["change"])
            if change > newestRevision:
                newestRevision = change

            if info["action"] in self.delete_actions:
                # don't increase the file cnt, otherwise details["depotFile123"] will have gaps!
                #fileCnt = fileCnt + 1
                continue

            for prop in ["depotFile", "rev", "action", "type" ]:
                details["%s%s" % (prop, fileCnt)] = info[prop]

            fileCnt = fileCnt + 1

        details["change"] = newestRevision

        # Use time from top-most change so that all git-p4 clones of
        # the same p4 repo have the same commit SHA1s.
        res = p4CmdList("describe -s %d" % newestRevision)
        newestTime = None
        for r in res:
            if r.has_key('time'):
                newestTime = int(r['time'])
        if newestTime is None:
            die("\"describe -s\" on newest change %d did not give a time")
        details["time"] = newestTime

        self.updateOptionDict(details)
        try:
            self.commit(details, self.extractFilesFromCommit(details), self.branch, self.depotPaths)
        except IOError:
            print "IO error with git fast-import. Is your git version recent enough?"
            print self.gitError.read()


    def getClientSpec(self):
        specList = p4CmdList("client -o")
        if len(specList) != 1:
            die('Output from "client -o" is %d lines, expecting 1' %
                len(specList))

        # dictionary of all client parameters
        entry = specList[0]

        # just the keys that start with "View"
        view_keys = [ k for k in entry.keys() if k.startswith("View") ]

        # hold this new View
        view = View()

        # append the lines, in order, to the view
        for view_num in range(len(view_keys)):
            k = "View%d" % view_num
            if k not in view_keys:
                die("Expected view key %s missing" % k)
            view.append(entry[k])

        self.clientSpecDirs = view
        if self.verbose:
            for i, m in enumerate(self.clientSpecDirs.mappings):
                    print "clientSpecDirs %d: %s" % (i, str(m))

    def run(self, args):
        self.depotPaths = []
        self.changeRange = ""
        self.initialParent = ""
        self.previousDepotPaths = []

        # map from branch depot path to parent branch
        self.knownBranches = {}
        self.initialParents = {}
        self.hasOrigin = originP4BranchesExist()
        if not self.syncWithOrigin:
            self.hasOrigin = False

        if self.importIntoRemotes:
            self.refPrefix = "refs/remotes/p4/"
        else:
            self.refPrefix = "refs/heads/p4/"

        if self.syncWithOrigin and self.hasOrigin:
            if not self.silent:
                print "Syncing with origin first by calling git fetch origin"
            system("git fetch origin")

        if len(self.branch) == 0:
            self.branch = self.refPrefix + "master"
            if gitBranchExists("refs/heads/p4") and self.importIntoRemotes:
                system("git update-ref %s refs/heads/p4" % self.branch)
                system("git branch -D p4");
            # create it /after/ importing, when master exists
            if not gitBranchExists(self.refPrefix + "HEAD") and self.importIntoRemotes and gitBranchExists(self.branch):
                system("git symbolic-ref %sHEAD %s" % (self.refPrefix, self.branch))

        # accept either the command-line option, or the configuration variable
        if self.useClientSpec:
            # will use this after clone to set the variable
            self.useClientSpec_from_options = True
        else:
            if gitConfig("git-p4.useclientspec", "--bool") == "true":
                self.useClientSpec = True
        if self.useClientSpec:
            self.getClientSpec()

        # TODO: should always look at previous commits,
        # merge with previous imports, if possible.
        if args == []:
            if self.hasOrigin:
                createOrUpdateBranchesFromOrigin(self.refPrefix, self.silent)
            self.listExistingP4GitBranches()

            if len(self.p4BranchesInGit) > 1:
                if not self.silent:
                    print "Importing from/into multiple branches"
                self.detectBranches = True

            if self.verbose:
                print "branches: %s" % self.p4BranchesInGit

            p4Change = 0
            for branch in self.p4BranchesInGit:
                logMsg =  extractLogMessageFromGitCommit(self.refPrefix + branch)

                settings = extractSettingsGitLog(logMsg)

                self.readOptions(settings)
                if (settings.has_key('depot-paths')
                    and settings.has_key ('change')):
                    change = int(settings['change']) + 1
                    p4Change = max(p4Change, change)

                    depotPaths = sorted(settings['depot-paths'])
                    if self.previousDepotPaths == []:
                        self.previousDepotPaths = depotPaths
                    else:
                        paths = []
                        for (prev, cur) in zip(self.previousDepotPaths, depotPaths):
                            prev_list = prev.split("/")
                            cur_list = cur.split("/")
                            for i in range(0, min(len(cur_list), len(prev_list))):
                                if cur_list[i] <> prev_list[i]:
                                    i = i - 1
                                    break

                            paths.append ("/".join(cur_list[:i + 1]))

                        self.previousDepotPaths = paths

            if p4Change > 0:
                self.depotPaths = sorted(self.previousDepotPaths)
                self.changeRange = "@%s,#head" % p4Change
                if not self.detectBranches:
                    self.initialParent = parseRevision(self.branch)
                if not self.silent and not self.detectBranches:
                    print "Performing incremental import into %s git branch" % self.branch

        if not self.branch.startswith("refs/"):
            self.branch = "refs/heads/" + self.branch

        if len(args) == 0 and self.depotPaths:
            if not self.silent:
                print "Depot paths: %s" % ' '.join(self.depotPaths)
        else:
            if self.depotPaths and self.depotPaths != args:
                print ("previous import used depot path %s and now %s was specified. "
                       "This doesn't work!" % (' '.join (self.depotPaths),
                                               ' '.join (args)))
                sys.exit(1)

            self.depotPaths = sorted(args)

        revision = ""
        self.users = {}

        # Make sure no revision specifiers are used when --changesfile
        # is specified.
        bad_changesfile = False
        if len(self.changesFile) > 0:
            for p in self.depotPaths:
                if p.find("@") >= 0 or p.find("#") >= 0:
                    bad_changesfile = True
                    break
        if bad_changesfile:
            die("Option --changesfile is incompatible with revision specifiers")

        newPaths = []
        for p in self.depotPaths:
            if p.find("@") != -1:
                atIdx = p.index("@")
                self.changeRange = p[atIdx:]
                if self.changeRange == "@all":
                    self.changeRange = ""
                elif ',' not in self.changeRange:
                    revision = self.changeRange
                    self.changeRange = ""
                p = p[:atIdx]
            elif p.find("#") != -1:
                hashIdx = p.index("#")
                revision = p[hashIdx:]
                p = p[:hashIdx]
            elif self.previousDepotPaths == []:
                # pay attention to changesfile, if given, else import
                # the entire p4 tree at the head revision
                if len(self.changesFile) == 0:
                    revision = "#head"

            p = re.sub ("\.\.\.$", "", p)
            if not p.endswith("/"):
                p += "/"

            newPaths.append(p)

        self.depotPaths = newPaths


        self.loadUserMapFromCache()
        self.labels = {}
        if self.detectLabels:
            self.getLabels();

        if self.detectBranches:
            ## FIXME - what's a P4 projectName ?
            self.projectName = self.guessProjectName()

            if self.hasOrigin:
                self.getBranchMappingFromGitBranches()
            else:
                self.getBranchMapping()
            if self.verbose:
                print "p4-git branches: %s" % self.p4BranchesInGit
                print "initial parents: %s" % self.initialParents
            for b in self.p4BranchesInGit:
                if b != "master":

                    ## FIXME
                    b = b[len(self.projectName):]
                self.createdBranches.add(b)

        self.tz = "%+03d%02d" % (- time.timezone / 3600, ((- time.timezone % 3600) / 60))

        importProcess = subprocess.Popen(["git", "fast-import"],
                                         stdin=subprocess.PIPE, stdout=subprocess.PIPE,
                                         stderr=subprocess.PIPE);
        self.gitOutput = importProcess.stdout
        self.gitStream = importProcess.stdin
        self.gitError = importProcess.stderr

        if revision:
            self.importHeadRevision(revision)
        else:
            changes = []

            if len(self.changesFile) > 0:
                output = open(self.changesFile).readlines()
                changeSet = set()
                for line in output:
                    changeSet.add(int(line))

                for change in changeSet:
                    changes.append(change)

                changes.sort()
            else:
                # catch "git-p4 sync" with no new branches, in a repo that
                # does not have any existing git-p4 branches
                if len(args) == 0 and not self.p4BranchesInGit:
                    die("No remote p4 branches.  Perhaps you never did \"git p4 clone\" in here.");
                if self.verbose:
                    print "Getting p4 changes for %s...%s" % (', '.join(self.depotPaths),
                                                              self.changeRange)
                changes = p4ChangesForPaths(self.depotPaths, self.changeRange)

                if len(self.maxChanges) > 0:
                    changes = changes[:min(int(self.maxChanges), len(changes))]

            if len(changes) == 0:
                if not self.silent:
                    print "No changes to import!"
                return True

            if not self.silent and not self.detectBranches:
                print "Import destination: %s" % self.branch

            self.updatedBranches = set()

            self.importChanges(changes)

            if not self.silent:
                print ""
                if len(self.updatedBranches) > 0:
                    sys.stdout.write("Updated branches: ")
                    for b in self.updatedBranches:
                        sys.stdout.write("%s " % b)
                    sys.stdout.write("\n")

        self.gitStream.close()
        if importProcess.wait() != 0:
            die("fast-import failed: %s" % self.gitError.read())
        self.gitOutput.close()
        self.gitError.close()

        return True

class P4Rebase(Command):
    def __init__(self):
        Command.__init__(self)
        self.options = [ ]
        self.description = ("Fetches the latest revision from perforce and "
                            + "rebases the current work (branch) against it")
        self.verbose = False

    def run(self, args):
        sync = P4Sync()
        sync.run([])

        return self.rebase()

    def rebase(self):
        if os.system("git update-index --refresh") != 0:
            die("Some files in your working directory are modified and different than what is in your index. You can use git update-index <filename> to bring the index up-to-date or stash away all your changes with git stash.");
        if len(read_pipe("git diff-index HEAD --")) > 0:
            die("You have uncommited changes. Please commit them before rebasing or stash them away with git stash.");

        [upstream, settings] = findUpstreamBranchPoint()
        if len(upstream) == 0:
            die("Cannot find upstream branchpoint for rebase")

        # the branchpoint may be p4/foo~3, so strip off the parent
        upstream = re.sub("~[0-9]+$", "", upstream)

        print "Rebasing the current branch onto %s" % upstream
        oldHead = read_pipe("git rev-parse HEAD").strip()
        system("git rebase %s" % upstream)
        system("git diff-tree --stat --summary -M %s HEAD" % oldHead)
        return True

class P4Clone(P4Sync):
    def __init__(self):
        P4Sync.__init__(self)
        self.description = "Creates a new git repository and imports from Perforce into it"
        self.usage = "usage: %prog [options] //depot/path[@revRange]"
        self.options += [
            optparse.make_option("--destination", dest="cloneDestination",
                                 action='store', default=None,
                                 help="where to leave result of the clone"),
            optparse.make_option("-/", dest="cloneExclude",
                                 action="append", type="string",
                                 help="exclude depot path"),
            optparse.make_option("--bare", dest="cloneBare",
                                 action="store_true", default=False),
        ]
        self.cloneDestination = None
        self.needsGit = False
        self.cloneBare = False

    # This is required for the "append" cloneExclude action
    def ensure_value(self, attr, value):
        if not hasattr(self, attr) or getattr(self, attr) is None:
            setattr(self, attr, value)
        return getattr(self, attr)

    def defaultDestination(self, args):
        ## TODO: use common prefix of args?
        depotPath = args[0]
        depotDir = re.sub("(@[^@]*)$", "", depotPath)
        depotDir = re.sub("(#[^#]*)$", "", depotDir)
        depotDir = re.sub(r"\.\.\.$", "", depotDir)
        depotDir = re.sub(r"/$", "", depotDir)
        return os.path.split(depotDir)[1]

    def run(self, args):
        if len(args) < 1:
            return False

        if self.keepRepoPath and not self.cloneDestination:
            sys.stderr.write("Must specify destination for --keep-path\n")
            sys.exit(1)

        depotPaths = args

        if not self.cloneDestination and len(depotPaths) > 1:
            self.cloneDestination = depotPaths[-1]
            depotPaths = depotPaths[:-1]

        self.cloneExclude = ["/"+p for p in self.cloneExclude]
        for p in depotPaths:
            if not p.startswith("//"):
                return False

        if not self.cloneDestination:
            self.cloneDestination = self.defaultDestination(args)

        print "Importing from %s into %s" % (', '.join(depotPaths), self.cloneDestination)

        if not os.path.exists(self.cloneDestination):
            os.makedirs(self.cloneDestination)
        chdir(self.cloneDestination)

        init_cmd = [ "git", "init" ]
        if self.cloneBare:
            init_cmd.append("--bare")
        subprocess.check_call(init_cmd)

        if not P4Sync.run(self, depotPaths):
            return False
        if self.branch != "master":
            if self.importIntoRemotes:
                masterbranch = "refs/remotes/p4/master"
            else:
                masterbranch = "refs/heads/p4/master"
            if gitBranchExists(masterbranch):
                system("git branch master %s" % masterbranch)
                if not self.cloneBare:
                    system("git checkout -f")
            else:
                print "Could not detect main branch. No checkout/master branch created."

        # auto-set this variable if invoked with --use-client-spec
        if self.useClientSpec_from_options:
            system("git config --bool git-p4.useclientspec true")

        return True

class P4Branches(Command):
    def __init__(self):
        Command.__init__(self)
        self.options = [ ]
        self.description = ("Shows the git branches that hold imports and their "
                            + "corresponding perforce depot paths")
        self.verbose = False

    def run(self, args):
        if originP4BranchesExist():
            createOrUpdateBranchesFromOrigin()

        cmdline = "git rev-parse --symbolic "
        cmdline += " --remotes"

        for line in read_pipe_lines(cmdline):
            line = line.strip()

            if not line.startswith('p4/') or line == "p4/HEAD":
                continue
            branch = line

            log = extractLogMessageFromGitCommit("refs/remotes/%s" % branch)
            settings = extractSettingsGitLog(log)

            print "%s <= %s (%s)" % (branch, ",".join(settings["depot-paths"]), settings["change"])
        return True

class HelpFormatter(optparse.IndentedHelpFormatter):
    def __init__(self):
        optparse.IndentedHelpFormatter.__init__(self)

    def format_description(self, description):
        if description:
            return description + "\n"
        else:
            return ""

def printUsage(commands):
    print "usage: %s <command> [options]" % sys.argv[0]
    print ""
    print "valid commands: %s" % ", ".join(commands)
    print ""
    print "Try %s <command> --help for command specific help." % sys.argv[0]
    print ""

commands = {
    "debug" : P4Debug,
    "submit" : P4Submit,
    "commit" : P4Submit,
    "sync" : P4Sync,
    "rebase" : P4Rebase,
    "clone" : P4Clone,
    "rollback" : P4RollBack,
    "branches" : P4Branches
}


def main():
    if len(sys.argv[1:]) == 0:
        printUsage(commands.keys())
        sys.exit(2)

    cmd = ""
    cmdName = sys.argv[1]
    try:
        klass = commands[cmdName]
        cmd = klass()
    except KeyError:
        print "unknown command %s" % cmdName
        print ""
        printUsage(commands.keys())
        sys.exit(2)

    options = cmd.options
    cmd.gitdir = os.environ.get("GIT_DIR", None)

    args = sys.argv[2:]

    if len(options) > 0:
        if cmd.needsGit:
            options.append(optparse.make_option("--git-dir", dest="gitdir"))

        parser = optparse.OptionParser(cmd.usage.replace("%prog", "%prog " + cmdName),
                                       options,
                                       description = cmd.description,
                                       formatter = HelpFormatter())

        (cmd, args) = parser.parse_args(sys.argv[2:], cmd);
    global verbose
    verbose = cmd.verbose
    if cmd.needsGit:
        if cmd.gitdir == None:
            cmd.gitdir = os.path.abspath(".git")
            if not isValidGitDir(cmd.gitdir):
                cmd.gitdir = read_pipe("git rev-parse --git-dir").strip()
                if os.path.exists(cmd.gitdir):
                    cdup = read_pipe("git rev-parse --show-cdup").strip()
                    if len(cdup) > 0:
                        chdir(cdup);

        if not isValidGitDir(cmd.gitdir):
            if isValidGitDir(cmd.gitdir + "/.git"):
                cmd.gitdir += "/.git"
            else:
                die("fatal: cannot locate git repository at %s" % cmd.gitdir)

        os.environ["GIT_DIR"] = cmd.gitdir

    if not cmd.run(args):
        parser.print_help()
        sys.exit(2)


if __name__ == '__main__':
    main()