CONFIGURATION FILE
------------------
-The git configuration file contains a number of variables that affect
-the git command's behavior. The `.git/config` file in each repository
+The Git configuration file contains a number of variables that affect
+the Git commands' behavior. The `.git/config` file in each repository
is used to store the configuration for that repository, and
`$HOME/.gitconfig` is used to store a per-user configuration as
fallback values for the `.git/config` file. The file `/etc/gitconfig`
can be used to store a system-wide default configuration.
-The configuration variables are used by both the git plumbing
+The configuration variables are used by both the Git plumbing
and the porcelains. The variables are divided into sections, wherein
the fully qualified variable name of the variable itself is the last
dot-separated segment and the section name is everything before the last
-dot. The variable names are case-insensitive and only alphanumeric
-characters are allowed. Some variables may appear multiple times.
+dot. The variable names are case-insensitive, allow only alphanumeric
+characters and `-`, and must start with an alphabetic character. Some
+variables may appear multiple times.
Syntax
~~~~~~
You can have `[section]` if you have `[section "subsection"]`, but you
don't need to.
-There is also a case insensitive alternative `[section.subsection]` syntax.
-In this syntax, subsection names follow the same restrictions as for section
-names.
+There is also a deprecated `[section.subsection]` syntax. With this
+syntax, the subsection name is converted to lower-case and is also
+compared case sensitively. These subsection names follow the same
+restrictions as section names.
All the other lines (and the remainder of the line after the section
header) are recognized as setting variables, in the form
'name = value'. If there is no equal sign on the line, the entire line
is taken as 'name' and the variable is recognized as boolean "true".
-The variable names are case-insensitive and only alphanumeric
-characters and `-` are allowed. There can be more than one value
-for a given variable; we say then that variable is multivalued.
+The variable names are case-insensitive, allow only alphanumeric characters
+and `-`, and must start with an alphabetic character. There can be more
+than one value for a given variable; we say then that the variable is
+multivalued.
Leading and trailing whitespace in a variable value is discarded.
Internal whitespace within a variable value is retained verbatim.
Some variables may require a special value format.
+Includes
+~~~~~~~~
+
+You can include one config file from another by setting the special
+`include.path` variable to the name of the file to be included. The
+included file is expanded immediately, as if its contents had been
+found at the location of the include directive. If the value of the
+`include.path` variable is a relative path, the path is considered to be
+relative to the configuration file in which the include directive was
+found. The value of `include.path` is subject to tilde expansion: `~/`
+is expanded to the value of `$HOME`, and `~user/` to the specified
+user's home directory. See below for examples.
+
Example
~~~~~~~
gitProxy="ssh" for "kernel.org"
gitProxy=default-proxy ; for the rest
+ [include]
+ path = /path/to/foo.inc ; include by absolute path
+ path = foo ; expand "foo" relative to the current file
+ path = ~/foo ; expand "foo" in your $HOME directory
+
Variables
~~~~~~~~~
porcelain configuration variables in the respective porcelain documentation.
advice.*::
- When set to 'true', display the given optional help message.
- When set to 'false', do not display. The configuration variables
- are:
+ These variables control various optional help messages designed to
+ aid new users. All 'advice.*' variables default to 'true', and you
+ can tell Git that you do not need help by setting these to 'false':
+
--
- pushNonFastForward::
- Advice shown when linkgit:git-push[1] refuses
- non-fast-forward refs. Default: true.
+ pushUpdateRejected::
+ Set this variable to 'false' if you want to disable
+ 'pushNonFFCurrent', 'pushNonFFDefault',
+ 'pushNonFFMatching', 'pushAlreadyExists',
+ 'pushFetchFirst', and 'pushNeedsForce'
+ simultaneously.
+ pushNonFFCurrent::
+ Advice shown when linkgit:git-push[1] fails due to a
+ non-fast-forward update to the current branch.
+ pushNonFFDefault::
+ Advice to set 'push.default' to 'upstream' or 'current'
+ when you ran linkgit:git-push[1] and pushed 'matching
+ refs' by default (i.e. you did not provide an explicit
+ refspec, and no 'push.default' configuration was set)
+ and it resulted in a non-fast-forward error.
+ pushNonFFMatching::
+ Advice shown when you ran linkgit:git-push[1] and pushed
+ 'matching refs' explicitly (i.e. you used ':', or
+ specified a refspec that isn't your current branch) and
+ it resulted in a non-fast-forward error.
+ pushAlreadyExists::
+ Shown when linkgit:git-push[1] rejects an update that
+ does not qualify for fast-forwarding (e.g., a tag.)
+ pushFetchFirst::
+ Shown when linkgit:git-push[1] rejects an update that
+ tries to overwrite a remote ref that points at an
+ object we do not have.
+ pushNeedsForce::
+ Shown when linkgit:git-push[1] rejects an update that
+ tries to overwrite a remote ref that points at an
+ object that is not a commit-ish, or make the remote
+ ref point at an object that is not a commit-ish.
statusHints::
- Directions on how to stage/unstage/add shown in the
- output of linkgit:git-status[1] and the template shown
- when writing commit messages. Default: true.
+ Show directions on how to proceed from the current
+ state in the output of linkgit:git-status[1], in
+ the template shown when writing commit messages in
+ linkgit:git-commit[1], and in the help message shown
+ by linkgit:git-checkout[1] when switching branch.
+ statusUoption::
+ Advise to consider using the `-u` option to linkgit:git-status[1]
+ when the command takes more than 2 seconds to enumerate untracked
+ files.
commitBeforeMerge::
Advice shown when linkgit:git-merge[1] refuses to
merge to avoid overwriting local changes.
- Default: true.
resolveConflict::
- Advices shown by various commands when conflicts
+ Advice shown by various commands when conflicts
prevent the operation from being performed.
- Default: true.
implicitIdentity::
Advice on how to set your identity configuration when
your information is guessed from the system username and
- domain name. Default: true.
-
+ domain name.
detachedHead::
- Advice shown when you used linkgit::git-checkout[1] to
+ Advice shown when you used linkgit:git-checkout[1] to
move to the detach HEAD state, to instruct how to create
- a local branch after the fact. Default: true.
+ a local branch after the fact.
+ amWorkDir::
+ Advice that shows the location of the patch file when
+ linkgit:git-am[1] fails to apply it.
+ rmHints::
+ In case of failure in the output of linkgit:git-rm[1],
+ show directions on how to proceed from the current state.
--
core.fileMode::
will probe and set core.fileMode false if appropriate when the
repository is created.
-core.ignoreCygwinFSTricks::
- This option is only used by Cygwin implementation of Git. If false,
- the Cygwin stat() and lstat() functions are used. This may be useful
- if your repository consists of a few separate directories joined in
- one hierarchy using Cygwin mount. If true, Git uses native Win32 API
- whenever it is possible and falls back to Cygwin functions only to
- handle symbol links. The native mode is more than twice faster than
- normal Cygwin l/stat() functions. True by default, unless core.filemode
- is true, in which case ignoreCygwinFSTricks is ignored as Cygwin's
- POSIX emulation is required to support core.filemode.
-
core.ignorecase::
If true, this option enables various workarounds to enable
- git to work better on filesystems that are not case sensitive,
+ Git to work better on filesystems that are not case sensitive,
like FAT. For example, if a directory listing finds
- "makefile" when git expects "Makefile", git will assume
+ "makefile" when Git expects "Makefile", Git will assume
it is really the same file, and continue to remember it as
"Makefile".
+
will probe and set core.ignorecase true if appropriate when the repository
is created.
+core.precomposeunicode::
+ This option is only used by Mac OS implementation of Git.
+ When core.precomposeunicode=true, Git reverts the unicode decomposition
+ of filenames done by Mac OS. This is useful when sharing a repository
+ between Mac OS and Linux or Windows.
+ (Git for Windows 1.7.10 or higher is needed, or Git under cygwin 1.7).
+ When false, file names are handled fully transparent by Git,
+ which is backward compatible with older versions of Git.
+
core.trustctime::
If false, the ctime differences between the index and the
working tree are ignored; useful when the inode change time
crawlers and some backup systems).
See linkgit:git-update-index[1]. True by default.
+core.checkstat::
+ Determines which stat fields to match between the index
+ and work tree. The user can set this to 'default' or
+ 'minimal'. Default (or explicitly 'default'), is to check
+ all fields, including the sub-second part of mtime and ctime.
+
core.quotepath::
The commands that output paths (e.g. 'ls-files',
'diff'), when not given the `-z` option, will quote
conversion.
core.safecrlf::
- If true, makes git check if converting `CRLF` is reversible when
+ If true, makes Git check if converting `CRLF` is reversible when
end-of-line conversion is active. Git will verify if a command
modifies a file in the work tree either directly or indirectly.
For example, committing a file followed by checking out the
same file should yield the original file in the work tree. If
this is not the case for the current setting of
- `core.autocrlf`, git will reject the file. The variable can
- be set to "warn", in which case git will only warn about an
+ `core.autocrlf`, Git will reject the file. The variable can
+ be set to "warn", in which case Git will only warn about an
irreversible conversion but continue the operation.
+
CRLF conversion bears a slight chance of corrupting data.
-When it is enabled, git will convert CRLF to LF during commit and LF to
+When it is enabled, Git will convert CRLF to LF during commit and LF to
CRLF during checkout. A file that contains a mixture of LF and
-CRLF before the commit cannot be recreated by git. For text
+CRLF before the commit cannot be recreated by Git. For text
files this is the right thing to do: it corrects line endings
such that we have only LF line endings in the repository.
But for binary files that are accidentally classified as text the
setting the conversion type explicitly in .gitattributes. Right
after committing you still have the original file in your work
tree and this file is not yet corrupted. You can explicitly tell
-git that this file is binary and git will handle the file
+Git that this file is binary and Git will handle the file
appropriately.
+
Unfortunately, the desired effect of cleaning up text files with
core.gitProxy::
A "proxy command" to execute (as 'command host port') instead
of establishing direct connection to the remote server when
- using the git protocol for fetching. If the variable value is
+ using the Git protocol for fetching. If the variable value is
in the "COMMAND for DOMAIN" format, the command is applied only
on hostnames ending with the specified domain string. This variable
may be set multiple times and is matched in the given order;
file in a ".git" subdirectory of a directory and its value differs
from the latter directory (e.g. "/path/to/.git/config" has
core.worktree set to "/different/path"), which is most likely a
-misconfiguration. Running git commands in the "/path/to" directory will
+misconfiguration. Running Git commands in the "/path/to" directory will
still use "/different/path" as the root of the work tree and can cause
confusion unless you know what you are doing (e.g. you are creating a
read-only snapshot of the same index to a location different from the
core.logAllRefUpdates::
Enable the reflog. Updates to a ref <ref> is logged to the file
"$GIT_DIR/logs/<ref>", by appending the new and old
- SHA1, the date/time and the reason of the update, but
+ SHA-1, the date/time and the reason of the update, but
only when the file exists. If this configuration
variable is set to true, missing "$GIT_DIR/logs/<ref>"
file is automatically created for branch heads (i.e. under
several users in a group (making sure all the files and objects are
group-writable). When 'all' (or 'world' or 'everybody'), the
repository will be readable by all users, additionally to being
- group-shareable. When 'umask' (or 'false'), git will use permissions
+ group-shareable. When 'umask' (or 'false'), Git will use permissions
reported by umask(2). When '0xxx', where '0xxx' is an octal number,
files in the repository will have this mode value. '0xxx' will override
user's umask value (whereas the other options will only override
See linkgit:git-init[1]. False by default.
core.warnAmbiguousRefs::
- If true, git will warn you if the ref name you passed it is ambiguous
- and might match multiple refs in the .git/refs/ tree. True by default.
+ If true, Git will warn you if the ref name you passed it is ambiguous
+ and might match multiple refs in the repository. True by default.
core.compression::
An integer -1..9, indicating a default compression level.
core.excludesfile::
In addition to '.gitignore' (per-directory) and
- '.git/info/exclude', git looks into this file for patterns
- of files which are not meant to be tracked. "{tilde}/" is expanded
- to the value of `$HOME` and "{tilde}user/" to the specified user's
- home directory. See linkgit:gitignore[5].
+ '.git/info/exclude', Git looks into this file for patterns
+ of files which are not meant to be tracked. "`~/`" is expanded
+ to the value of `$HOME` and "`~user/`" to the specified user's
+ home directory. Its default value is $XDG_CONFIG_HOME/git/ignore.
+ If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/ignore
+ is used instead. See linkgit:gitignore[5].
core.askpass::
Some commands (e.g. svn and http interfaces) that interactively
core.attributesfile::
In addition to '.gitattributes' (per-directory) and
- '.git/info/attributes', git looks into this file for attributes
+ '.git/info/attributes', Git looks into this file for attributes
(see linkgit:gitattributes[5]). Path expansions are made the same
- way as for `core.excludesfile`.
+ way as for `core.excludesfile`. Its default value is
+ $XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME is either not
+ set or empty, $HOME/.config/git/attributes is used instead.
core.editor::
Commands such as `commit` and `tag` that lets you edit
variable when it is set, and the environment variable
`GIT_EDITOR` is not set. See linkgit:git-var[1].
+core.commentchar::
+ Commands such as `commit` and `tag` that lets you edit
+ messages consider a line that begins with this character
+ commented, and removes them after the editor returns
+ (default '#').
+
+sequence.editor::
+ Text editor used by `git rebase -i` for editing the rebase instruction file.
+ The value is meant to be interpreted by the shell when it is used.
+ It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable.
+ When not configured the default commit message editor is used instead.
+
core.pager::
- The command that git will use to paginate output. Can
- be overridden with the `GIT_PAGER` environment
- variable. Note that git sets the `LESS` environment
- variable to `FRSX` if it is unset when it runs the
- pager. One can change these settings by setting the
- `LESS` variable to some other value. Alternately,
- these settings can be overridden on a project or
- global basis by setting the `core.pager` option.
- Setting `core.pager` has no affect on the `LESS`
- environment variable behaviour above, so if you want
- to override git's default settings this way, you need
- to be explicit. For example, to disable the S option
- in a backward compatible manner, set `core.pager`
- to `less -+$LESS -FRX`. This will be passed to the
- shell by git, which will translate the final command to
- `LESS=FRSX less -+FRSX -FRX`.
+ Text viewer for use by Git commands (e.g., 'less'). The value
+ is meant to be interpreted by the shell. The order of preference
+ is the `$GIT_PAGER` environment variable, then `core.pager`
+ configuration, then `$PAGER`, and then the default chosen at
+ compile time (usually 'less').
++
+When the `LESS` environment variable is unset, Git sets it to `FRSX`
+(if `LESS` environment variable is set, Git does not change it at
+all). If you want to selectively override Git's default setting
+for `LESS`, you can set `core.pager` to e.g. `less -+S`. This will
+be passed to the shell by Git, which will translate the final
+command to `LESS=FRSX less -+S`. The environment tells the command
+to set the `S` option to chop long lines but the command line
+resets it to the default to fold long lines.
core.whitespace::
A comma separated list of common whitespace problems to
* `space-before-tab` treats a space character that appears immediately
before a tab character in the initial indent part of the line as an
error (enabled by default).
-* `indent-with-non-tab` treats a line that is indented with 8 or more
- space characters as an error (not enabled by default).
+* `indent-with-non-tab` treats a line that is indented with space
+ characters instead of the equivalent tabs as an error (not enabled by
+ default).
* `tab-in-indent` treats a tab character in the initial indent part of
the line as an error (not enabled by default).
* `blank-at-eof` treats blank lines added at the end of file as an error
does not trigger if the character before such a carriage-return
is not a whitespace (not enabled by default).
* `tabwidth=<n>` tells how many character positions a tab occupies; this
- is relevant for `indent-with-non-tab` and when git fixes `tab-in-indent`
+ is relevant for `indent-with-non-tab` and when Git fixes `tab-in-indent`
errors. The default tab width is 8. Allowed values are 1 to 63.
core.fsyncobjectfiles::
+
This can speed up operations like 'git diff' and 'git status' especially
on filesystems like NFS that have weak caching semantics and thus
-relatively high IO latencies. With this set to 'true', git will do the
+relatively high IO latencies. With this set to 'true', Git will do the
index comparison to the filesystem data in parallel, allowing
overlapping IO's.
add.ignoreErrors::
Tells 'git add' to continue adding files when some files cannot be
added due to indexing errors. Equivalent to the '--ignore-errors'
- option of linkgit:git-add[1]. Older versions of git accept only
+ option of linkgit:git-add[1]. Older versions of Git accept only
`add.ignore-errors`, which does not follow the usual naming
- convention for configuration variables. Newer versions of git
+ convention for configuration variables. Newer versions of Git
honor `add.ignoreErrors` as well.
alias.*::
after defining "alias.last = cat-file commit HEAD", the invocation
"git last" is equivalent to "git cat-file commit HEAD". To avoid
confusion and troubles with script usage, aliases that
- hide existing git commands are ignored. Arguments are split by
+ hide existing Git commands are ignored. Arguments are split by
spaces, the usual shell quoting and escaping is supported.
quote pair and a backslash can be used to quote them.
+
branch.autosetuprebase::
When a new branch is created with 'git branch' or 'git checkout'
- that tracks another branch, this variable tells git to set
+ that tracks another branch, this variable tells Git to set
up pull to rebase instead of merge (see "branch.<name>.rebase").
When `never`, rebase is never automatically set to true.
When `local`, rebase is set to true for tracked branches of
This option defaults to never.
branch.<name>.remote::
- When in branch <name>, it tells 'git fetch' and 'git push' which
- remote to fetch from/push to. It defaults to `origin` if no remote is
- configured. `origin` is also used if you are not on any branch.
+ When on branch <name>, it tells 'git fetch' and 'git push'
+ which remote to fetch from/push to. The remote to push to
+ may be overridden with `remote.pushdefault` (for all branches).
+ The remote to push to, for the current branch, may be further
+ overridden by `branch.<name>.pushremote`. If no remote is
+ configured, or if you are not on any branch, it defaults to
+ `origin` for fetching and `remote.pushdefault` for pushing.
+
+branch.<name>.pushremote::
+ When on branch <name>, it overrides `branch.<name>.remote` for
+ pushing. It also overrides `remote.pushdefault` for pushing
+ from branch <name>. When you pull from one place (e.g. your
+ upstream) and push to another place (e.g. your own publishing
+ repository), you would want to set `remote.pushdefault` to
+ specify the remote to push to for all branches, and use this
+ option to override it for a specific branch.
branch.<name>.merge::
Defines, together with branch.<name>.remote, the upstream branch
branch.<name>.rebase::
When true, rebase the branch <name> on top of the fetched branch,
instead of merging the default branch from the default remote when
- "git pull" is run.
- *NOTE*: this is a possibly dangerous operation; do *not* use
- it unless you understand the implications (see linkgit:git-rebase[1]
- for details).
+ "git pull" is run. See "pull.rebase" for doing this in a non
+ branch-specific manner.
++
+ When preserve, also pass `--preserve-merges` along to 'git rebase'
+ so that locally committed merge commits will not be flattened
+ by running 'git pull'.
++
+*NOTE*: this is a possibly dangerous operation; do *not* use
+it unless you understand the implications (see linkgit:git-rebase[1]
+for details).
+
+branch.<name>.description::
+ Branch description, can be edited with
+ `git branch --edit-description`. Branch description is
+ automatically added in the format-patch cover letter or
+ request-pull summary.
browser.<tool>.cmd::
Specify the command to invoke the specified browser. The
working repository in gitweb (see linkgit:git-instaweb[1]).
clean.requireForce::
- A boolean to make git-clean do nothing unless given -f
- or -n. Defaults to true.
+ A boolean to make git-clean do nothing unless given -f,
+ -i or -n. Defaults to true.
color.branch::
A boolean to enable/disable color in the output of
color.branch.<slot>::
Use customized color for branch coloration. `<slot>` is one of
`current` (the current branch), `local` (a local branch),
- `remote` (a remote-tracking branch in refs/remotes/), `plain` (other
+ `remote` (a remote-tracking branch in refs/remotes/),
+ `upstream` (upstream tracking branch), `plain` (other
refs).
+
The value for these configuration variables is a list of colors (at most
color.interactive::
When set to `always`, always use colors for interactive prompts
- and displays (such as those used by "git-add --interactive").
- When false (or `never`), never. When set to `true` or `auto`, use
- colors only when the output is to the terminal. Defaults to false.
+ and displays (such as those used by "git-add --interactive" and
+ "git-clean --interactive"). When false (or `never`), never.
+ When set to `true` or `auto`, use colors only when the output is
+ to the terminal. Defaults to false.
color.interactive.<slot>::
- Use customized color for 'git add --interactive'
- output. `<slot>` may be `prompt`, `header`, `help` or `error`, for
- four distinct types of normal output from interactive
- commands. The values of these variables may be specified as
- in color.branch.<slot>.
+ Use customized color for 'git add --interactive' and 'git clean
+ --interactive' output. `<slot>` may be `prompt`, `header`, `help`
+ or `error`, for four distinct types of normal output from
+ interactive commands. The values of these variables may be
+ specified as in color.branch.<slot>.
color.pager::
A boolean to enable/disable colored output when the pager is in
one of `header` (the header text of the status message),
`added` or `updated` (files which are added but not committed),
`changed` (files which are changed but not added in the index),
- `untracked` (files which are not tracked by git),
+ `untracked` (files which are not tracked by Git),
`branch` (the current branch), or
`nobranch` (the color the 'no branch' warning is shown in, defaulting
to red). The values of these variables may be specified as in
as `color.diff` and `color.grep` that control the use of color
per command family. Its scope will expand as more commands learn
configuration to set a default for the `--color` option. Set it
- to `always` if you want all output not intended for machine
- consumption to use color, to `true` or `auto` if you want such
- output to use color when written to the terminal, or to `false` or
- `never` if you prefer git commands not to use color unless enabled
- explicitly with some other configuration or the `--color` option.
+ to `false` or `never` if you prefer Git commands not to use
+ color unless enabled explicitly with some other configuration
+ or the `--color` option. Set it to `always` if you want all
+ output not intended for machine consumption to use color, to
+ `true` or `auto` (this is the default since Git 1.8.4) if you
+ want such output to use color when written to the terminal.
+
+column.ui::
+ Specify whether supported commands should output in columns.
+ This variable consists of a list of tokens separated by spaces
+ or commas:
++
+These options control when the feature should be enabled
+(defaults to 'never'):
++
+--
+`always`;;
+ always show in columns
+`never`;;
+ never show in columns
+`auto`;;
+ show in columns if the output is to the terminal
+--
++
+These options control layout (defaults to 'column'). Setting any
+of these implies 'always' if none of 'always', 'never', or 'auto' are
+specified.
++
+--
+`column`;;
+ fill columns before rows
+`row`;;
+ fill rows before columns
+`plain`;;
+ show in one column
+--
++
+Finally, these options can be combined with a layout option (defaults
+to 'nodense'):
++
+--
+`dense`;;
+ make unequal size columns to utilize more space
+`nodense`;;
+ make equal size columns
+--
+
+column.branch::
+ Specify whether to output branch listing in `git branch` in columns.
+ See `column.ui` for details.
+
+column.clean::
+ Specify the layout when list items in `git clean -i`, which always
+ shows files and directories in columns. See `column.ui` for details.
+
+column.status::
+ Specify whether to output untracked files in `git status` in columns.
+ See `column.ui` for details.
+
+column.tag::
+ Specify whether to output tag listing in `git tag` in columns.
+ See `column.ui` for details.
+
+commit.cleanup::
+ This setting overrides the default of the `--cleanup` option in
+ `git commit`. See linkgit:git-commit[1] for details. Changing the
+ default can be useful when you always want to keep lines that begin
+ with comment character `#` in your log message, in which case you
+ would do `git config commit.cleanup whitespace` (note that you will
+ have to remove the help lines that begin with `#` in the commit log
+ template yourself, if you do this).
commit.status::
A boolean to enable/disable inclusion of status information in the
commit.template::
Specify a file to use as the template for new commit messages.
- "{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the
+ "`~/`" is expanded to the value of `$HOME` and "`~user/`" to the
specified user's home directory.
+credential.helper::
+ Specify an external helper to be called when a username or
+ password credential is needed; the helper may consult external
+ storage to avoid prompting the user for the credentials. See
+ linkgit:gitcredentials[7] for details.
+
+credential.useHttpPath::
+ When acquiring credentials, consider the "path" component of an http
+ or https URL to be important. Defaults to false. See
+ linkgit:gitcredentials[7] for more information.
+
+credential.username::
+ If no username is set for a network authentication, use this username
+ by default. See credential.<context>.* below, and
+ linkgit:gitcredentials[7].
+
+credential.<url>.*::
+ Any of the credential.* options above can be applied selectively to
+ some credentials. For example "credential.https://example.com.username"
+ would set the default username only for https connections to
+ example.com. See linkgit:gitcredentials[7] for details on how URLs are
+ matched.
+
include::diff-config.txt[]
difftool.<tool>.path::
difftool.prompt::
Prompt before each invocation of the diff tool.
-diff.wordRegex::
- A POSIX Extended Regular Expression used to determine what is a "word"
- when performing word-by-word difference calculations. Character
- sequences that match the regular expression are "words", all other
- characters are *ignorable* whitespace.
-
fetch.recurseSubmodules::
This option can be either set to a boolean value or to 'on-demand'.
Setting it to a boolean changes the behavior of fetch and pull to
is used instead.
fetch.unpackLimit::
- If the number of objects fetched over the git native
+ If the number of objects fetched over the Git native
transfer is below this
limit, then the objects will be unpacked into loose object
files. However if the number of received objects equals or
especially on slow filesystems. If not set, the value of
`transfer.unpackLimit` is used instead.
+fetch.prune::
+ If true, fetch will automatically behave as if the `--prune`
+ option was given on the command line. See also `remote.<name>.prune`.
+
format.attach::
Enable multipart/mixed attachments as the default for
'format-patch'. The value can also be a double quoted string
format.signature::
The default for format-patch is to output a signature containing
- the git version number. Use this variable to change that default.
+ the Git version number. Use this variable to change that default.
Set this variable to the empty string ("") to suppress
signature generation.
a boolean value, or `shallow` or `deep`. `shallow` threading
makes every mail a reply to the head of the series,
where the head is chosen from the cover letter, the
- `\--in-reply-to`, and the first patch mail, in this order.
+ `--in-reply-to`, and the first patch mail, in this order.
`deep` threading makes every mail a reply to the previous one.
A true boolean value is the same as `shallow`, and a false
value disables threading.
format.signoff::
- A boolean value which lets you enable the `-s/--signoff` option of
- format-patch by default. *Note:* Adding the Signed-off-by: line to a
- patch should be a conscious act and means that you certify you have
- the rights to submit this work under the same open source license.
- Please see the 'SubmittingPatches' document for further discussion.
+ A boolean value which lets you enable the `-s/--signoff` option of
+ format-patch by default. *Note:* Adding the Signed-off-by: line to a
+ patch should be a conscious act and means that you certify you have
+ the rights to submit this work under the same open source license.
+ Please see the 'SubmittingPatches' document for further discussion.
+
+format.coverLetter::
+ A boolean that controls whether to generate a cover-letter when
+ format-patch is invoked, but in addition can be set to "auto", to
+ generate a cover-letter only when there's more than one patch.
filter.<driver>.clean::
The command which is used to convert the content of a worktree
gitcvs.usecrlfattr::
If true, the server will look up the end-of-line conversion
attributes for files to determine the '-k' modes to use. If
- the attributes force git to treat a file as text,
+ the attributes force Git to treat a file as text,
the '-k' mode will be left blank so CVS clients will
treat it as text. If they suppress text conversion, the file
will be set with '-kb' mode, which suppresses any newline munging
gitcvs.dbname::
Database used by git-cvsserver to cache revision information
- derived from the git repository. The exact meaning depends on the
+ derived from the Git repository. The exact meaning depends on the
used database driver, for SQLite (which is the default driver) this
is a filename. Supports variable substitution (see
linkgit:git-cvsserver[1] for details). May not contain semicolons (`;`).
gitcvs.dbdriver::
Used Perl DBI driver. You can specify any available driver
- for this here, but it might not work. git-cvsserver is tested
+ for this here, but it might not work. git-cvsserver is tested
with 'DBD::SQLite', reported to work with 'DBD::Pg', and
reported *not* to work with 'DBD::mysql'. Experimental feature.
May not contain double colons (`:`). Default: 'SQLite'.
grep.lineNumber::
If set to true, enable '-n' option by default.
+grep.patternType::
+ Set the default matching behavior. Using a value of 'basic', 'extended',
+ 'fixed', or 'perl' will enable the '--basic-regexp', '--extended-regexp',
+ '--fixed-strings', or '--perl-regexp' option accordingly, while the
+ value 'default' will return to the default matching behavior.
+
grep.extendedRegexp::
- If set to true, enable '--extended-regexp' option by default.
+ If set to true, enable '--extended-regexp' option by default. This
+ option is ignored when the 'grep.patternType' option is set to a value
+ other than 'default'.
+
+gpg.program::
+ Use this custom program instead of "gpg" found on $PATH when
+ making or verifying a PGP signature. The program must support the
+ same command line interface as GPG, namely, to verify a detached
+ signature, "gpg --verify $file - <$signature" is run, and the
+ program is expected to signal a good signature by exiting with
+ code 0, and to generate an ascii-armored detached signature, the
+ standard input of "gpg -bsau $key" is fed with the contents to be
+ signed, and the program is expected to send the result to its
+ standard output.
gui.commitmsgwidth::
Defines how wide the commit message window is in the
value is 0 - the command will be just shown but not executed.
This is the default.
+help.htmlpath::
+ Specify the path where the HTML documentation resides. File system paths
+ and URLs are supported. HTML pages will be prefixed with this path when
+ help is displayed in the 'web' format. This defaults to the documentation
+ path of your Git installation.
+
http.proxy::
- Override the HTTP proxy, normally configured using the 'http_proxy'
- environment variable (see linkgit:curl[1]). This can be overridden
- on a per-remote basis; see remote.<name>.proxy
+ Override the HTTP proxy, normally configured using the 'http_proxy',
+ 'https_proxy', and 'all_proxy' environment variables (see
+ `curl(1)`). This can be overridden on a per-remote basis; see
+ remote.<name>.proxy
http.cookiefile::
File containing previously stored cookie lines which should be used
- in the git http session, if they match the server. The file format
+ in the Git http session, if they match the server. The file format
of the file to read cookies from should be plain HTTP headers or
the Netscape/Mozilla cookie file format (see linkgit:curl[1]).
NOTE that the file specified with http.cookiefile is only used as
- input. No cookies will be stored in the file.
+ input unless http.saveCookies is set.
+
+http.savecookies::
+ If set, store cookies received during requests to the file specified by
+ http.cookiefile. Has no effect if http.cookiefile is unset.
http.sslVerify::
Whether to verify the SSL certificate when fetching or pushing
variable.
http.sslCertPasswordProtected::
- Enable git's password prompt for the SSL certificate. Otherwise
+ Enable Git's password prompt for the SSL certificate. Otherwise
OpenSSL will prompt the user, possibly many times, if the
certificate or private key is encrypted. Can be overridden by the
'GIT_SSL_CERT_PASSWORD_PROTECTED' environment variable.
with when fetching or pushing over HTTPS. Can be overridden
by the 'GIT_SSL_CAPATH' environment variable.
+http.sslTry::
+ Attempt to use AUTH SSL/TLS and encrypted data transfers
+ when connecting via regular FTP protocol. This might be needed
+ if the FTP server requires it for security reasons or you wish
+ to connect securely whenever remote FTP server supports it.
+ Default is false since it might trigger certificate verification
+ errors on misconfigured servers.
+
http.maxRequests::
How many HTTP requests to launch in parallel. Can be overridden
by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5.
http.useragent::
The HTTP USER_AGENT string presented to an HTTP server. The default
- value represents the version of the client git such as git/1.7.1.
+ value represents the version of the client Git such as git/1.7.1.
This option allows you to override this value to a more common value
such as Mozilla/4.0. This may be necessary, for instance, if
connecting through a firewall that restricts HTTP connections to a set
of common USER_AGENT strings (but not including those like git/1.7.1).
Can be overridden by the 'GIT_HTTP_USER_AGENT' environment variable.
+http.<url>.*::
+ Any of the http.* options above can be applied selectively to some urls.
+ For a config key to match a URL, each element of the config key is
+ compared to that of the URL, in the following order:
++
+--
+. Scheme (e.g., `https` in `https://example.com/`). This field
+ must match exactly between the config key and the URL.
+
+. Host/domain name (e.g., `example.com` in `https://example.com/`).
+ This field must match exactly between the config key and the URL.
+
+. Port number (e.g., `8080` in `http://example.com:8080/`).
+ This field must match exactly between the config key and the URL.
+ Omitted port numbers are automatically converted to the correct
+ default for the scheme before matching.
+
+. Path (e.g., `repo.git` in `https://example.com/repo.git`). The
+ path field of the config key must match the path field of the URL
+ either exactly or as a prefix of slash-delimited path elements. This means
+ a config key with path `foo/` matches URL path `foo/bar`. A prefix can only
+ match on a slash (`/`) boundary. Longer matches take precedence (so a config
+ key with path `foo/bar` is a better match to URL path `foo/bar` than a config
+ key with just path `foo/`).
+
+. User name (e.g., `user` in `https://user@example.com/repo.git`). If
+ the config key has a user name it must match the user name in the
+ URL exactly. If the config key does not have a user name, that
+ config key will match a URL with any user name (including none),
+ but at a lower precedence than a config key with a user name.
+--
++
+The list above is ordered by decreasing precedence; a URL that matches
+a config key's path is preferred to one that matches its user name. For example,
+if the URL is `https://user@example.com/foo/bar` a config key match of
+`https://example.com/foo` will be preferred over a config key match of
+`https://user@example.com`.
++
+All URLs are normalized before attempting any matching (the password part,
+if embedded in the URL, is always ignored for matching purposes) so that
+equivalent urls that are simply spelled differently will match properly.
+Environment variable settings always override any matches. The urls that are
+matched against are those given directly to Git commands. This means any URLs
+visited as a result of a redirection do not participate in matching.
+
i18n.commitEncoding::
- Character encoding the commit messages are stored in; git itself
+ Character encoding the commit messages are stored in; Git itself
does not care per se, but this information is necessary e.g. when
importing commits from emails or in the gitk graphical history
browser (and possibly at other places in the future or in other
interactive.singlekey::
In interactive commands, allow the user to provide one-letter
input with a single key (i.e., without hitting enter).
- Currently this is used by the `\--patch` mode of
+ Currently this is used by the `--patch` mode of
linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1],
linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this
setting is silently ignored if portable keystroke input
log.abbrevCommit::
If true, makes linkgit:git-log[1], linkgit:git-show[1], and
- linkgit:git-whatchanged[1] assume `\--abbrev-commit`. You may
- override this option with `\--no-abbrev-commit`.
+ linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may
+ override this option with `--no-abbrev-commit`.
log.date::
Set the default date-time mode for the 'log' command.
Setting a value for log.date is similar to using 'git log''s
- `\--date` option. Possible values are `relative`, `local`,
+ `--date` option. Possible values are `relative`, `local`,
`default`, `iso`, `rfc`, and `short`; see linkgit:git-log[1]
for details.
Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which
normally hide the root commit will now show it. True by default.
+log.mailmap::
+ If true, makes linkgit:git-log[1], linkgit:git-show[1], and
+ linkgit:git-whatchanged[1] assume `--use-mailmap`.
+
mailmap.file::
The location of an augmenting mailmap file. The default
mailmap, located in the root of the repository, is loaded
subdirectory, or somewhere outside of the repository itself.
See linkgit:git-shortlog[1] and linkgit:git-blame[1].
+mailmap.blob::
+ Like `mailmap.file`, but consider the value as a reference to a
+ blob in the repository. If both `mailmap.file` and
+ `mailmap.blob` are given, both are parsed, with entries from
+ `mailmap.file` taking precedence. In a bare repository, this
+ defaults to `HEAD:.mailmap`. In a non-bare repository, it
+ defaults to empty.
+
man.viewer::
Specify the programs that may be used to display help in the
'man' format. See linkgit:git-help[1].
`true` (i.e. keep the backup files).
mergetool.keepTemporaries::
- When invoking a custom merge tool, git uses a set of temporary
+ When invoking a custom merge tool, Git uses a set of temporary
files to pass to the tool. If the tool returns an error and this
variable is set to `true`, then these temporary files will be
preserved, otherwise they will be removed after the tool has
notes.rewrite.<command>::
When rewriting commits with <command> (currently `amend` or
- `rebase`) and this variable is set to `true`, git
+ `rebase`) and this variable is set to `true`, Git
automatically copies your notes from the original to the
rewritten commit. Defaults to `true`, but see
"notes.rewriteRef" below.
warning. This is meant to reduce packing time on multiprocessor
machines. The required amount of memory for the delta search window
is however multiplied by the number of threads.
- Specifying 0 will cause git to auto-detect the number of CPU's
+ Specifying 0 will cause Git to auto-detect the number of CPU's
and set the number of threads accordingly.
pack.indexVersion::
and this config option ignored whenever the corresponding pack is
larger than 2 GB.
+
-If you have an old git that does not understand the version 2 `{asterisk}.idx` file,
+If you have an old Git that does not understand the version 2 `*.idx` file,
cloning or fetching over a non native protocol (e.g. "http" and "rsync")
-that will copy both `{asterisk}.pack` file and corresponding `{asterisk}.idx` file from the
+that will copy both `*.pack` file and corresponding `*.idx` file from the
other side may give you a repository that cannot be accessed with your
-older version of git. If the `{asterisk}.pack` file is smaller than 2 GB, however,
+older version of Git. If the `*.pack` file is smaller than 2 GB, however,
you can use linkgit:git-index-pack[1] on the *.pack file to regenerate
-the `{asterisk}.idx` file.
+the `*.idx` file.
pack.packSizeLimit::
The maximum size of a pack. This setting only affects
packing to a file when repacking, i.e. the git:// protocol
- is unaffected. It can be overridden by the `\--max-pack-size`
+ is unaffected. It can be overridden by the `--max-pack-size`
option of linkgit:git-repack[1]. The minimum size allowed is
limited to 1 MiB. The default is unlimited.
Common unit suffixes of 'k', 'm', or 'g' are
pager.<cmd>::
If the value is boolean, turns on or off pagination of the
- output of a particular git subcommand when writing to a tty.
+ output of a particular Git subcommand when writing to a tty.
Otherwise, turns on pagination for the subcommand using the
- pager specified by the value of `pager.<cmd>`. If `\--paginate`
- or `\--no-pager` is specified on the command line, it takes
+ pager specified by the value of `pager.<cmd>`. If `--paginate`
+ or `--no-pager` is specified on the command line, it takes
precedence over this option. To disable pagination for all
commands, set `core.pager` or `GIT_PAGER` to `cat`.
Alias for a --pretty= format string, as specified in
linkgit:git-log[1]. Any aliases defined here can be used just
as the built-in pretty formats could. For example,
- running `git config pretty.changelog "format:{asterisk} %H %s"`
+ running `git config pretty.changelog "format:* %H %s"`
would cause the invocation `git log --pretty=changelog`
- to be equivalent to running `git log "--pretty=format:{asterisk} %H %s"`.
+ to be equivalent to running `git log "--pretty=format:* %H %s"`.
Note that an alias with the same name as a built-in format
will be silently ignored.
+pull.rebase::
+ When true, rebase branches on top of the fetched branch, instead
+ of merging the default branch from the default remote when "git
+ pull" is run. See "branch.<name>.rebase" for setting this on a
+ per-branch basis.
++
+ When preserve, also pass `--preserve-merges` along to 'git rebase'
+ so that locally committed merge commits will not be flattened
+ by running 'git pull'.
++
+*NOTE*: this is a possibly dangerous operation; do *not* use
+it unless you understand the implications (see linkgit:git-rebase[1]
+for details).
+
pull.octopus::
The default merge strategy to use when pulling multiple branches
at once.
The default merge strategy to use when pulling a single branch.
push.default::
- Defines the action git push should take if no refspec is given
- on the command line, no refspec is configured in the remote, and
- no refspec is implied by any of the options given on the command
- line. Possible values are:
+ Defines the action `git push` should take if no refspec is
+ explicitly given. Different values are well-suited for
+ specific workflows; for instance, in a purely central workflow
+ (i.e. the fetch source is equal to the push destination),
+ `upstream` is probably what you want. Possible values are:
++
+--
+
+* `nothing` - do not push anything (error out) unless a refspec is
+ explicitly given. This is primarily meant for people who want to
+ avoid mistakes by always being explicit.
+
+* `current` - push the current branch to update a branch with the same
+ name on the receiving end. Works in both central and non-central
+ workflows.
+
+* `upstream` - push the current branch back to the branch whose
+ changes are usually integrated into the current branch (which is
+ called `@{upstream}`). This mode only makes sense if you are
+ pushing to the same repository you would normally pull from
+ (i.e. central workflow).
+
+* `simple` - in centralized workflow, work like `upstream` with an
+ added safety to refuse to push if the upstream branch's name is
+ different from the local one.
++
+When pushing to a remote that is different from the remote you normally
+pull from, work as `current`. This is the safest option and is suited
+for beginners.
++
+This mode will become the default in Git 2.0.
+
+* `matching` - push all branches having the same name on both ends.
+ This makes the repository you are pushing to remember the set of
+ branches that will be pushed out (e.g. if you always push 'maint'
+ and 'master' there and no other branches, the repository you push
+ to will have these two branches, and your local 'maint' and
+ 'master' will be pushed there).
+
-* `nothing` - do not push anything.
-* `matching` - push all matching branches.
- All branches having the same name in both ends are considered to be
- matching. This is the default.
-* `upstream` - push the current branch to its upstream branch.
-* `tracking` - deprecated synonym for `upstream`.
-* `current` - push the current branch to a branch of the same name.
+To use this mode effectively, you have to make sure _all_ the
+branches you would push out are ready to be pushed out before
+running 'git push', as the whole point of this mode is to allow you
+to push all of the branches in one go. If you usually finish work
+on only one branch and push out the result, while other branches are
+unfinished, this mode is not for you. Also this mode is not
+suitable for pushing into a shared central repository, as other
+people may add new branches there, or update the tip of existing
+branches outside your control.
++
+This is currently the default, but Git 2.0 will change the default
+to `simple`.
+
+--
rebase.stat::
Whether to show a diffstat of what changed upstream since the last
rebase.autosquash::
If set to true enable '--autosquash' option by default.
+rebase.autostash::
+ When set to true, automatically create a temporary stash
+ before the operation begins, and apply it after the operation
+ ends. This means that you can run rebase on a dirty worktree.
+ However, use with care: the final stash application after a
+ successful rebase might result in non-trivial conflicts.
+ Defaults to false.
+
receive.autogc::
By default, git-receive-pack will run "git-gc --auto" after
receiving data from git-push and updating refs. You can stop
even if that push is forced. This configuration variable is
set when initializing a shared repository.
+receive.hiderefs::
+ String(s) `receive-pack` uses to decide which refs to omit
+ from its initial advertisement. Use more than one
+ definitions to specify multiple prefix strings. A ref that
+ are under the hierarchies listed on the value of this
+ variable is excluded, and is hidden when responding to `git
+ push`, and an attempt to update or delete a hidden ref by
+ `git push` is rejected.
+
receive.updateserverinfo::
If set to true, git-receive-pack will run git-update-server-info
after receiving data from git-push and updating refs.
+remote.pushdefault::
+ The remote to push to by default. Overrides
+ `branch.<name>.remote` for all branches, and is overridden by
+ `branch.<name>.pushremote` for specific branches.
+
remote.<name>.url::
The URL of a remote repository. See linkgit:git-fetch[1] or
linkgit:git-push[1].
remote.<name>.mirror::
If true, pushing to this remote will automatically behave
- as if the `\--mirror` option was given on the command line.
+ as if the `--mirror` option was given on the command line.
remote.<name>.skipDefaultUpdate::
If true, this remote will be skipped by default when updating
linkgit:git-fetch[1].
remote.<name>.vcs::
- Setting this to a value <vcs> will cause git to interact with
+ Setting this to a value <vcs> will cause Git to interact with
the remote with the git-remote-<vcs> helper.
+remote.<name>.prune::
+ When set to true, fetching from this remote by default will also
+ remove any remote-tracking branches which no longer exist on the
+ remote (as if the `--prune` option was give on the command line).
+ Overrides `fetch.prune` settings, if any.
+
remotes.<group>::
The list of remotes which are fetched by "git remote update
<group>". See linkgit:git-remote[1].
repack.usedeltabaseoffset::
By default, linkgit:git-repack[1] creates packs that use
delta-base offset. If you need to share your repository with
- git older than version 1.4.4, either directly or via a dumb
+ Git older than version 1.4.4, either directly or via a dumb
protocol such as http, then you need to set this option to
- "false" and repack. Access from old git versions over the
+ "false" and repack. Access from old Git versions over the
native protocol are unaffected by this option.
rerere.autoupdate::
rerere.enabled::
Activate recording of resolved conflicts, so that identical
- conflict hunks can be resolved automatically, should they
- be encountered again. linkgit:git-rerere[1] command is by
- default enabled if you create `rr-cache` directory under
- `$GIT_DIR`, but can be disabled by setting this option to false.
+ conflict hunks can be resolved automatically, should they be
+ encountered again. By default, linkgit:git-rerere[1] is
+ enabled if there is an `rr-cache` directory under the
+ `$GIT_DIR`, e.g. if "rerere" was previously used in the
+ repository.
sendemail.identity::
A configuration identity. When given, causes values in the
sendemail.smtpssl::
Deprecated alias for 'sendemail.smtpencryption = ssl'.
+sendemail.smtpsslcertpath::
+ Path to ca-certificates (either a directory or a single file).
+ Set it to an empty string to disable certificate verification.
+
sendemail.<identity>.*::
Identity-specific versions of the 'sendemail.*' parameters
found below, taking precedence over those when the this
sendemail.aliasesfile::
sendemail.aliasfiletype::
+sendemail.annotate::
sendemail.bcc::
sendemail.cc::
sendemail.cccmd::
status.relativePaths::
By default, linkgit:git-status[1] shows paths relative to the
current directory. Setting this variable to `false` shows paths
- relative to the repository root (this was the default for git
+ relative to the repository root (this was the default for Git
prior to v1.5.4).
+status.short::
+ Set to true to enable --short by default in linkgit:git-status[1].
+ The option --no-short takes precedence over this variable.
+
+status.branch::
+ Set to true to enable --branch by default in linkgit:git-status[1].
+ The option --no-branch takes precedence over this variable.
+
+status.displayCommentPrefix::
+ If set to true, linkgit:git-status[1] will insert a comment
+ prefix before each output line (starting with
+ `core.commentChar`, i.e. `#` by default). This was the
+ behavior of linkgit:git-status[1] in Git 1.8.4 and previous.
+ Defaults to false.
+
status.showUntrackedFiles::
By default, linkgit:git-status[1] and linkgit:git-commit[1] show
files which are not currently tracked by Git. Directories which
If this is set to a non zero number or true (identical to -1 or an
unlimited number), the submodule summary will be enabled and a
summary of commits for modified submodules will be shown (see
- --summary-limit option of linkgit:git-submodule[1]).
+ --summary-limit option of linkgit:git-submodule[1]). Please note
+ that the summary output command will be suppressed for all
+ submodules when `diff.ignoreSubmodules` is set to 'all' or only
+ for those submodules where `submodule.<name>.ignore=all`. To
+ also view the summary for ignored submodules you can either use
+ the --ignore-submodules=dirty command line option or the 'git
+ submodule summary' command, which shows a similar output but does
+ not honor these settings.
submodule.<name>.path::
submodule.<name>.url::
URL and other values found in the `.gitmodules` file. See
linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
+submodule.<name>.branch::
+ The remote branch name for a submodule, used by `git submodule
+ update --remote`. Set this option to override the value found in
+ the `.gitmodules` file. See linkgit:git-submodule[1] and
+ linkgit:gitmodules[5] for details.
+
submodule.<name>.fetchRecurseSubmodules::
This option can be used to control recursive fetching of this
submodule. It can be overridden by using the --[no-]recurse-submodules
submodules that have untracked files in their work tree as changed.
This setting overrides any setting made in .gitmodules for this submodule,
both settings can be overridden on the command line by using the
- "--ignore-submodules" option.
+ "--ignore-submodules" option. The 'git submodule' commands are not
+ affected by this setting.
tar.umask::
This variable can be used to restrict the permission bits of
not set, the value of this variable is used instead.
Defaults to false.
+transfer.hiderefs::
+ This variable can be used to set both `receive.hiderefs`
+ and `uploadpack.hiderefs` at the same time to the same
+ values. See entries for these other variables.
+
transfer.unpackLimit::
When `fetch.unpackLimit` or `receive.unpackLimit` are
not set, the value of this variable is used instead.
The default value is 100.
+uploadpack.hiderefs::
+ String(s) `upload-pack` uses to decide which refs to omit
+ from its initial advertisement. Use more than one
+ definitions to specify multiple prefix strings. A ref that
+ are under the hierarchies listed on the value of this
+ variable is excluded, and is hidden from `git ls-remote`,
+ `git fetch`, etc. An attempt to fetch a hidden ref by `git
+ fetch` will fail. See also `uploadpack.allowtipsha1inwant`.
+
+uploadpack.allowtipsha1inwant::
+ When `uploadpack.hiderefs` is in effect, allow `upload-pack`
+ to accept a fetch request that asks for an object at the tip
+ of a hidden ref (by default, such a request is rejected).
+ see also `uploadpack.hiderefs`.
+
+uploadpack.keepalive::
+ When `upload-pack` has started `pack-objects`, there may be a
+ quiet period while `pack-objects` prepares the pack. Normally
+ it would output progress information, but if `--quiet` was used
+ for the fetch, `pack-objects` will output nothing at all until
+ the pack data begins. Some clients and networks may consider
+ the server to be hung and give up. Setting this option instructs
+ `upload-pack` to send an empty keepalive packet every
+ `uploadpack.keepalive` seconds. Setting this option to 0
+ disables keepalive packets entirely. The default is 5 seconds.
+
url.<base>.insteadOf::
Any URL that starts with this value will be rewritten to
start, instead, with <base>. In cases where some site serves a
large number of repositories, and serves them with multiple
access methods, and some users need to use different access
methods, this feature allows people to specify any of the
- equivalent URLs and have git automatically rewrite the URL to
+ equivalent URLs and have Git automatically rewrite the URL to
the best alternative for the particular user, even for a
never-before-seen repository on the site. When more than one
insteadOf strings match a given URL, the longest match is used.
resulting URL will be pushed to. In cases where some site serves
a large number of repositories, and serves them with multiple
access methods, some of which do not allow push, this feature
- allows people to specify a pull-only URL and have git
+ allows people to specify a pull-only URL and have Git
automatically use an appropriate URL to push, even for a
never-before-seen repository on the site. When more than one
pushInsteadOf strings match a given URL, the longest match is
- used. If a remote has an explicit pushurl, git will ignore this
+ used. If a remote has an explicit pushurl, Git will ignore this
setting for that remote.
user.email::
projects / thirdparty / git.git / blobdiff