SYNOPSIS
--------
[verse]
-'git-daemon' [--verbose] [--syslog] [--export-all]
- [--timeout=n] [--init-timeout=n] [--strict-paths]
- [--base-path=path] [--user-path | --user-path=path]
- [--interpolated-path=pathtemplate]
- [--reuseaddr] [--detach] [--pid-file=file]
- [--enable=service] [--disable=service]
- [--allow-override=service] [--forbid-override=service]
- [--inetd | [--listen=host_or_ipaddr] [--port=n] [--user=user [--group=group]]
- [directory...]
+'git daemon' [--verbose] [--syslog] [--export-all]
+ [--timeout=<n>] [--init-timeout=<n>] [--max-connections=<n>]
+ [--strict-paths] [--base-path=<path>] [--base-path-relaxed]
+ [--user-path | --user-path=<path>]
+ [--interpolated-path=<pathtemplate>]
+ [--reuseaddr] [--detach] [--pid-file=<file>]
+ [--enable=<service>] [--disable=<service>]
+ [--allow-override=<service>] [--forbid-override=<service>]
+ [--inetd | [--listen=<host_or_ipaddr>] [--port=<n>] [--user=<user> [--group=<group>]]
+ [<directory>...]
DESCRIPTION
-----------
It verifies that the directory has the magic file "git-daemon-export-ok", and
it will refuse to export any git directory that hasn't explicitly been marked
for export this way (unless the '--export-all' parameter is specified). If you
-pass some directory paths as 'git-daemon' arguments, you can further restrict
+pass some directory paths as 'git daemon' arguments, you can further restrict
the offers to a whitelist comprising of those.
By default, only `upload-pack` service is enabled, which serves
-`git-fetch-pack` and `git-peek-remote` clients that are invoked
-from `git-fetch`, `git-ls-remote`, and `git-clone`.
+'git fetch-pack' and 'git ls-remote' clients, which are invoked
+from 'git fetch', 'git pull', and 'git clone'.
This is ideally suited for read-only updates, i.e., pulling from
git repositories.
-An `upload-archive` also exists to serve `git-archive`.
+An `upload-archive` also exists to serve 'git archive'.
OPTIONS
-------
--strict-paths::
Match paths exactly (i.e. don't allow "/foo/repo" when the real path is
"/foo/repo.git" or "/foo/repo/.git") and don't do user-relative paths.
- git-daemon will refuse to start when this option is enabled and no
+ 'git daemon' will refuse to start when this option is enabled and no
whitelist is specified.
---base-path::
+--base-path=<path>::
Remap all the path requests as relative to the given path.
- This is sort of "GIT root" - if you run git-daemon with
+ This is sort of "GIT root" - if you run 'git daemon' with
'--base-path=/srv/git' on example.com, then if you later try to pull
- 'git://example.com/hello.git', `git-daemon` will interpret the path
+ 'git://example.com/hello.git', 'git daemon' will interpret the path
as '/srv/git/hello.git'.
--base-path-relaxed::
If --base-path is enabled and repo lookup fails, with this option
- `git-daemon` will attempt to lookup without prefixing the base path.
+ 'git daemon' will attempt to lookup without prefixing the base path.
This is useful for switching to --base-path usage, while still
allowing the old paths.
---interpolated-path=pathtemplate::
+--interpolated-path=<pathtemplate>::
To support virtual hosting, an interpolated path template can be
used to dynamically construct alternate paths. The template
supports %H for the target hostname as supplied by the client but
--inetd::
Have the server run as an inetd service. Implies --syslog.
- Incompatible with --port, --listen, --user and --group options.
+ Incompatible with --detach, --port, --listen, --user and --group
+ options.
---listen=host_or_ipaddr::
- Listen on an a specific IP address or hostname. IP addresses can
- be either an IPv4 address or an IPV6 address if supported. If IPv6
+--listen=<host_or_ipaddr>::
+ Listen on a specific IP address or hostname. IP addresses can
+ be either an IPv4 address or an IPv6 address if supported. If IPv6
is not supported, then --listen=hostname is also not supported and
--listen must be given an IPv4 address.
+ Can be given more than once.
Incompatible with '--inetd' option.
---port=n::
+--port=<n>::
Listen on an alternative port. Incompatible with '--inetd' option.
---init-timeout::
- Timeout between the moment the connection is established and the
- client request is received (typically a rather low value, since
+--init-timeout=<n>::
+ Timeout (in seconds) between the moment the connection is established
+ and the client request is received (typically a rather low value, since
that should be basically immediate).
---timeout::
- Timeout for specific client sub-requests. This includes the time
- it takes for the server to process the sub-request and time spent
- waiting for next client's request.
+--timeout=<n>::
+ Timeout (in seconds) for specific client sub-requests. This includes
+ the time it takes for the server to process the sub-request and the
+ time spent waiting for the next client's request.
+
+--max-connections=<n>::
+ Maximum number of concurrent clients, defaults to 32. Set it to
+ zero for no limit.
--syslog::
Log to syslog instead of stderr. Note that this option does not imply
--verbose, thus by default only error conditions will be logged.
---user-path, --user-path=path::
- Allow ~user notation to be used in requests. When
+--user-path::
+--user-path=<path>::
+ Allow {tilde}user notation to be used in requests. When
specified with no parameter, requests to
- git://host/~alice/foo is taken as a request to access
+ git://host/{tilde}alice/foo is taken as a request to access
'foo' repository in the home directory of user `alice`.
If `--user-path=path` is specified, the same request is
taken as a request to access `path/foo` repository in
--detach::
Detach from the shell. Implies --syslog.
---pid-file=file::
+--pid-file=<file>::
Save the process id in 'file'. Ignored when the daemon
is run under `--inetd`.
---user=user, --group=group::
+--user=<user>::
+--group=<group>::
Change daemon's uid and gid before entering the service loop.
When only `--user` is given without `--group`, the
primary group ID for the user is used. The values of
+
Giving these options is an error when used with `--inetd`; use
the facility of inet daemon to achieve the same before spawning
-`git-daemon` if needed.
+'git daemon' if needed.
---enable=service, --disable=service::
+--enable=<service>::
+--disable=<service>::
Enable/disable the service site-wide per default. Note
that a service disabled site-wide can still be enabled
per repository if it is marked overridable and the
- repository enables the service with an configuration
+ repository enables the service with a configuration
item.
---allow-override=service, --forbid-override=service::
+--allow-override=<service>::
+--forbid-override=<service>::
Allow/forbid overriding the site-wide default with per
repository configuration. By default, all the services
are overridable.
+--informative-errors::
+--no-informative-errors::
+ When informative errors are turned on, git-daemon will report
+ more verbose errors to the client, differentiating conditions
+ like "no such repository" from "repository not exported". This
+ is more convenient for clients, but may leak information about
+ the existence of unexported repositories. When informative
+ errors are not enabled, all errors report "access denied" to the
+ client. The default is --no-informative-errors.
+
<directory>::
A directory to add to the whitelist of allowed directories. Unless
--strict-paths is specified this will also include subdirectories
These services can be globally enabled/disabled using the
command line options of this command. If a finer-grained
-control is desired (e.g. to allow `git-archive` to be run
+control is desired (e.g. to allow 'git archive' to be run
against only in a few selected repositories the daemon serves),
the per-repository configuration file can be used to enable or
disable them.
upload-pack::
- This serves `git-fetch-pack` and `git-peek-remote`
+ This serves 'git fetch-pack' and 'git ls-remote'
clients. It is enabled by default, but a repository can
disable it by setting `daemon.uploadpack` configuration
item to `false`.
upload-archive::
- This serves `git-archive --remote`. It is disabled by
+ This serves 'git archive --remote'. It is disabled by
default, but a repository can enable it by setting
- `daemon.uploadarchive` configuration item to `true`.
+ `daemon.uploadarch` configuration item to `true`.
receive-pack::
- This serves `git-send-pack` clients, allowing anonymous
+ This serves 'git send-pack' clients, allowing anonymous
push. It is disabled by default, as there is _no_
authentication in the protocol (in other words, anybody
can push anything into the repository, including removal
git 9418/tcp # Git Version Control System
------------
-git-daemon as inetd server::
- To set up `git-daemon` as an inetd service that handles any
+'git daemon' as inetd server::
+ To set up 'git daemon' as an inetd service that handles any
repository under the whitelisted set of directories, /pub/foo
and /pub/bar, place an entry like the following into
/etc/inetd all on one line:
+
------------------------------------------------
- git stream tcp nowait nobody /usr/bin/git-daemon
- git-daemon --inetd --verbose --export-all
+ git stream tcp nowait nobody /usr/bin/git
+ git daemon --inetd --verbose --export-all
/pub/foo /pub/bar
------------------------------------------------
-git-daemon as inetd server for virtual hosts::
- To set up `git-daemon` as an inetd service that handles
+'git daemon' as inetd server for virtual hosts::
+ To set up 'git daemon' as an inetd service that handles
repositories for different virtual hosts, `www.example.com`
and `www.example.org`, place an entry like the following into
`/etc/inetd` all on one line:
+
------------------------------------------------
- git stream tcp nowait nobody /usr/bin/git-daemon
- git-daemon --inetd --verbose --export-all
+ git stream tcp nowait nobody /usr/bin/git
+ git daemon --inetd --verbose --export-all
--interpolated-path=/pub/%H%D
/pub/www.example.org/software
/pub/www.example.com/software
default repository could be made as well.
-git-daemon as regular daemon for virtual hosts::
- To set up `git-daemon` as a regular, non-inetd service that
+'git daemon' as regular daemon for virtual hosts::
+ To set up 'git daemon' as a regular, non-inetd service that
handles repositories for multiple virtual hosts based on
their IP addresses, start the daemon like this:
+
------------------------------------------------
- git-daemon --verbose --export-all
+ git daemon --verbose --export-all
--interpolated-path=/pub/%IP/%D
/pub/192.168.1.200/software
/pub/10.10.220.23/software
Repositories can still be accessed by hostname though, assuming
they correspond to these IP addresses.
-
-To enable `git-archive --remote` and disable `git-fetch` against
-a repository, have the following in the configuration file in the
-repository (that is the file 'config' next to 'HEAD', 'refs' and
-'objects').
+selectively enable/disable services per repository::
+ To enable 'git archive --remote' and disable 'git fetch' against
+ a repository, have the following in the configuration file in the
+ repository (that is the file 'config' next to 'HEAD', 'refs' and
+ 'objects').
+
----------------------------------------------------------------
-[daemon]
- uploadpack = false
- uploadarchive = true
+ [daemon]
+ uploadpack = false
+ uploadarch = true
----------------------------------------------------------------
-Author
-------
-Written by Linus Torvalds <torvalds@osdl.org>, YOSHIFUJI Hideaki
-<yoshfuji@linux-ipv6.org> and the git-list <git@vger.kernel.org>
-
-Documentation
---------------
-Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>.
+ENVIRONMENT
+-----------
+'git daemon' will set REMOTE_ADDR to the IP address of the client
+that connected to it, if the IP address is available. REMOTE_ADDR will
+be available in the environment of hooks called when
+services are performed.
GIT
---
-Part of the gitlink:git[7] suite
+Part of the linkgit:git[1] suite
projects / thirdparty / git.git / blobdiff