With the removal of the support for sendemail.smtpssl in the preceding
commit the parsing of sendemail.smtpencryption is no longer special,
and can by moved to %config_settings.
This gets us rid of an unconditional call to Git::config(), which as
we'll see in subsequent commits matters for startup performance.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: remove non-working support for "sendemail.smtpssl"
Remove the already dead code to support "sendemail.smtpssl" by finally
removing the dead code supporting the configuration option.
In f6bebd121ac (git-send-email: add support for TLS via
Net::SMTP::SSL, 2008-06-25) the --smtp-ssl command-line option was
documented as deprecated, later in 65180c66186 (List send-email config
options in config.txt., 2009-07-22) the "sendemail.smtpssl"
configuration option was also documented as such.
Then in in 3ff15040e22 (send-email: fix regression in
sendemail.identity parsing, 2019-05-17) I unintentionally removed
support for it by introducing a bug in read_config().
As can be seen from the diff context we've already returned unless
$enc i defined, so it's not possible for us to reach the "elsif"
branch here. This code was therefore already dead since Git v2.23.0.
So let's just remove it. We were already 11 years into a stated
deprecation period of this variable when 3ff15040e22 landed, now it's
around 13. Since it hasn't worked anyway for around 2 years it looks
like we can safely remove it.
The --smtp-ssl option is still deprecated, if someone cares they can
follow-up and remove that too, but unlike the config option that one
could still be in use in the wild. I'm just removing this code that's
provably unused already.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email tests: support GIT_TEST_PERL_FATAL_WARNINGS=true
Add support for the "GIT_TEST_PERL_FATAL_WARNINGS=true" test mode to
"send-email". This was added to e.g. git-svn in 5338ed2b26 (perl:
check for perl warnings while running tests, 2020-10-21), but not
"send-email". Let's rectify that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 27 May 2021 04:53:55 +0000 (04:53 +0000)]
dir: update stale description of treat_directory()
The documentation comment for treat_directory() was originally written
in 095952 (Teach directory traversal about subprojects, 2007-04-11)
which was before the 'struct dir_struct' split its bitfield of named
options into a 'flags' enum in 7c4c97c0 (Turn the flags in struct
dir_struct into a single variable, 2009-02-16). When those flags
changed, the comment became stale, since members like
'show_other_directories' transitioned into flags like
DIR_SHOW_OTHER_DIRECTORIES.
Update the comments for treat_directory() to use these flag names rather
than the old member names.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 27 May 2021 03:36:58 +0000 (12:36 +0900)]
Merge branch 'ab/pack-linkage-fix'
"ld" on Solaris fails to link some test helpers, which has been
worked around by reshuffling the inline function definitions from a
header file to a source file that is the only user of them.
* ab/pack-linkage-fix:
pack-objects: move static inline from a header to the sole consumer
pack-objects: move static inline from a header to the sole consumer
Move the code that is only used in builtin/pack-objects.c out of
pack-objects.h.
This fixes an issue where Solaris's SunCC hasn't been able to compile
git since 483fa7f42d9 (t/helper/test-bitmap.c: initial commit,
2021-03-31).
The real origin of that issue is that in 898eba5e630 (pack-objects:
refer to delta objects by index instead of pointer, 2018-04-14)
utility functions only needed by builtin/pack-objects.c were added to
pack-objects.h. Since then the header has been used in a few other
places, but 483fa7f42d9 was the first time it was used by test helper.
Since Solaris is stricter about linking and the oe_get_size_slow()
function lives in builtin/pack-objects.c the build started failing
with:
Undefined first referenced
symbol in file
oe_get_size_slow t/helper/test-bitmap.o
ld: fatal: symbol referencing errors. No output written to t/helper/test-tool
On other platforms this is presumably OK because the compiler and/or
linker detects that the "static inline" functions that reference
oe_get_size_slow() aren't used.
Let's solve this by moving the relevant code from pack-objects.h to
builtin/pack-objects.c. This is almost entirely a code-only move, but
because of the early macro definitions in that file referencing some
of these inline functions we need to move the definition of "static
struct packing_data to_pack" earlier, and declare these inline
functions above the macros.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matheus Tavares [Wed, 26 May 2021 23:58:56 +0000 (20:58 -0300)]
t2080: fix cp invocation to copy symlinks instead of following them
t2080 makes a few copies of a test repository and later performs a
branch switch on each one of the copies to verify that parallel checkout
and sequential checkout produce the same results. However, the
repository is copied with `cp -R` which, on some systems, defaults to
following symlinks on the directory hierarchy and copying their target
files instead of copying the symlinks themselves. AIX is one example of
system where this happens. Because the symlinks are not preserved, the
copied repositories have paths that do not match what is in the index,
causing git to abort the checkout operation that we want to test. This
makes the test fail on these systems.
Fix this by copying the repository with the POSIX flag '-P', which
forces cp to copy the symlinks instead of following them. Note that we
already use this flag for other cp invocations in our test suite (see
t7001). With this change, t2080 now passes on AIX.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: move "hooks_path" invocation to git-send-email.perl
Move the newly added "hooks_path" API in Git.pm to its only user in
git-send-email.perl. This was added in c8243933c74 (git-send-email:
Respect core.hooksPath setting, 2021-03-23), meaning that it hasn't
yet made it into a non-rc release of git.
The consensus with Git.pm is that we need to be considerate of
out-of-tree users who treat it as a public documented interface. We
should therefore be less willing to add new functionality to it, least
we be stuck supporting it after our own uses for it disappear.
In this case the git-send-email.perl hook invocation will probably be
replaced by a future "git hook run" command, and in the commit
preceding this one the "hooks_path" become nothing but a trivial
wrapper for "rev-parse --git-path hooks" anyway (with no
Cwd::abs_path() call), so let's just inline this command in
git-send-email.perl itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: don't needlessly abs_path() the core.hooksPath
In c8243933c74 (git-send-email: Respect core.hooksPath setting,
2021-03-23) we started supporting core.hooksPath in "send-email". It's
been reported that on Windows[1] doing this by calling abs_path()
results in different canonicalizations of the absolute path.
This wasn't an issue in c8243933c74 itself, but was revealed by my ea7811b37e0 (git-send-email: improve --validate error output,
2021-04-06) when we started emitting the path to the hook, which was
previously only internal to git-send-email.perl.
The just-landed 53753a37d09 (t9001-send-email.sh: fix expected
absolute paths on Windows, 2021-05-24) narrowly fixed this issue, but
I believe we can do better here. We should not be relying on whatever
changes Perl's abs_path() makes to the path "rev-parse --git-path
hooks" hands to us. Let's instead trust it, and hand it to Perl's
system() in git-send-email.perl. It will handle either a relative or
absolute path.
So let's revert most of 53753a37d09 and just have "hooks_path" return
what we get from "rev-parse" directly without modification. This has
the added benefit of making the error message friendlier in the common
case, we'll no longer print an absolute path for repository-local hook
errors.
Junio C Hamano [Tue, 25 May 2021 20:52:34 +0000 (05:52 +0900)]
t1092: revert the "-1" hack for emulating "no progress meter"
This looked like a good idea, but it seems to break tests on 32-bit
builds rather badly. Revert to just use "100 thousands must be big
enough" for now.
Derrick Stolee [Mon, 24 May 2021 19:55:07 +0000 (19:55 +0000)]
t1092: use GIT_PROGRESS_DELAY for consistent results
The t1092-sparse-checkout-compatibility.sh tests compare the stdout and
stderr for several Git commands across both full checkouts, sparse
checkouts with a full index, and sparse checkouts with a sparse index.
Since these are direct comparisons, sometimes a progress indicator can
flush at unpredictable points, especially on slower machines. This
causes the tests to be flaky.
One standard way to avoid this is to add GIT_PROGRESS_DELAY=0 to the Git
commands that are run, as this will force every progress indicator
created with start_progress_delay() to be created immediately. However,
there are some progress indicators that are created in the case of a
full index that are not created with a sparse index. Moreover, their
values may be different as those indexes have a different number of
entries.
Instead, use GIT_PROGRESS_DELAY=-1 (which will turn into UINT_MAX)
to ensure that any reasonable machine running these tests would
never display delayed progress indicators.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matheus Tavares [Tue, 25 May 2021 03:41:01 +0000 (00:41 -0300)]
init: fix bug regarding ~/ expansion in init.templateDir
We used to read the init.templateDir setting at builtin/init-db.c using
a git_config() callback that, in turn, called git_config_pathname(). To
simplify the config reading logic at this file and plug a memory leak,
this was replaced by a direct call to git_config_get_value() at e4de4502e6 ("init: remove git_init_db_config() while fixing leaks",
2021-03-14). However, this function doesn't provide path expanding
semantics, like git_config_pathname() does, so paths with '~/' and
'~user/' are treated literally. This makes 'git init' fail to handle
init.templateDir paths using these constructs:
$ git config init.templateDir '~/templates_dir'
$ git init
'warning: templates not found in ~/templates_dir'
Replace the git_config_get_value() call by git_config_get_pathname(),
which does the '~/' and '~user/' expansions. Also add a regression test.
Note that unlike git_config_get_value(), the config cache does not own
the memory for the path returned by git_config_get_pathname(), so we
must free() it.
Reported on IRC by rkta.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression with the "the editor exited uncleanly, aborting
everything" error message going missing after my d21616c0394 (git-send-email: refactor duplicate $? checks into a
function, 2021-04-06).
I introduced a $msg variable, but did not actually use it. This caused
us to miss the optional error message supplied by the "do_edit"
codepath. Fix that, and add tests to check that this works.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Mon, 24 May 2021 19:38:09 +0000 (21:38 +0200)]
t9001-send-email.sh: fix expected absolute paths on Windows
Git for Windows is a native Windows program that works with native
absolute paths in the drive letter style C:\dir. The auxiliary
infrastructure is based on MSYS2, which uses POSIX style /C/dir.
When we test for output of absolute paths produced by git.exe, we
usally have to expect C:\dir style paths. To produce such expected
paths, we have to use $(pwd) in the test scripts; the alternative,
$PWD, produces a POSIX style path. ($PWD is a shell variable, and the
shell is bash, an MSYS2 program, and operates in the POSIX realm.)
There are two recently added tests that were written to expect C:\dir
paths. The output that is tested is produced by `git send-email`, but
behind the scenes, this is a Perl script, which also works in the
POSIX realm and produces /C/dir style output.
In the first test case that is changed here, replace $(pwd) by $PWD
so that the expected path is constructed using /C/dir style.
The second test case sets core.hooksPath to an absolute path. Since
the test script talks to native git.exe, it is supposed to place a
C:/dir style path into the configuration; therefore, keep $(pwd).
When this configuration value is consumed by the Perl script, it is
transformed to /C/dir style by the MSYS2 layer and echoed back in
this form in the error message. Hence, do use $PWD for the expected
value.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Fri, 21 May 2021 10:37:47 +0000 (03:37 -0700)]
stash show: use stash.showIncludeUntracked even when diff options given
If options pertaining to how the diff is displayed is provided to
`git stash show`, the command will ignore the stash.showIncludeUntracked
configuration variable, defaulting to not showing any untracked files.
This is unintuitive behaviour since the format of the diff output and
whether or not to display untracked files are orthogonal.
Use stash.showIncludeUntracked even when diff options are given. Of
course, this is still overridable via the command-line options.
Update the documentation to explicitly say which configuration variables
will be overridden when a diff options are given.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Thu, 20 May 2021 18:28:10 +0000 (18:28 +0000)]
simple-ipc: correct ifdefs when NO_PTHREADS is defined
Simple IPC always requires threads (in addition to various
platform-specific IPC support). Fix the ifdefs in the Makefile
to define SUPPORTS_SIMPLE_IPC when appropriate.
Previously, the Unix version of the code would only verify that
Unix domain sockets were available.
This problem was reported here:
https://lore.kernel.org/git/YKN5lXs4AoK%2FJFTO@coredump.intra.peff.net/T/#m08be8f1942ea8a2c36cfee0e51cdf06489fdeafc
Reported-by: Randall S. Becker <rsbecker@nexbridge.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regression fix for a change made during this cycle.
* cs/http-use-basic-after-failed-negotiate:
Revert "remote-curl: fall back to basic auth if Negotiate fails"
t5551: test http interaction with credential helpers
Junio C Hamano [Wed, 19 May 2021 23:55:00 +0000 (08:55 +0900)]
Merge branch 'jk/test-chainlint-softer'
The "chainlint" feature in the test framework is a handy way to
catch common mistakes in writing new tests, but tends to get
expensive. An knob to selectively disable it has been introduced
to help running tests that the developer has not modified.
* jk/test-chainlint-softer:
t: avoid sed-based chain-linting in some expensive cases
Junio C Hamano [Wed, 19 May 2021 23:55:00 +0000 (08:55 +0900)]
Merge branch 'zh/ref-filter-push-remote-fix'
The handling of "%(push)" formatting element of "for-each-ref" and
friends was broken when the same codepath started handling
"%(push:<what>)", which has been corrected.
* zh/ref-filter-push-remote-fix:
ref-filter: fix read invalid union member bug
Junio C Hamano [Wed, 19 May 2021 23:54:59 +0000 (08:54 +0900)]
Merge branch 'ew/sha256-clone-remote-curl-fix'
"git clone" from SHA256 repository by Git built with SHA-1 as the
default hash algorithm over the dumb HTTP protocol did not
correctly set up the resulting repository, which has been corrected.
* ew/sha256-clone-remote-curl-fix:
remote-curl: fix clone on sha256 repos
Junio C Hamano [Wed, 19 May 2021 23:54:58 +0000 (08:54 +0900)]
Merge branch 'en/dir-traversal'
"git clean" and "git ls-files -i" had confusion around working on
or showing ignored paths inside an ignored directory, which has
been corrected.
* en/dir-traversal:
dir: introduce readdir_skip_dot_and_dotdot() helper
dir: update stale description of treat_directory()
dir: traverse into untracked directories if they may have ignored subfiles
dir: avoid unnecessary traversal into ignored directory
t3001, t7300: add testcase showcasing missed directory traversal
t7300: add testcase showing unnecessary traversal into ignored directory
ls-files: error out on -i unless -o or -c are specified
dir: report number of visited directories and paths with trace2
dir: convert trace calls to trace2 equivalents
That commit does fix the situation it intended to (avoiding Negotiate
even when the credentials were provided in the URL), but it creates a
more serious regression: we now never hit the conditional for "we had a
username and password, tried them, but the server still gave us a 401".
That has two bad effects:
1. we never call credential_reject(), and thus a bogus credential
stored by a helper will live on forever
2. we never return HTTP_NOAUTH, so the error message the user gets is
"The requested URL returned error: 401", instead of "Authentication
failed".
Doing this correctly seems non-trivial, as we don't know whether the
Negotiate auth was a problem. Since this is a regression in the upcoming
v2.23.0 release (for which we're in -rc0), let's revert for now and work
on a fix separately.
(Note that this isn't a pure revert; the previous commit added a test
showing the regression, so we can now flip it to expect_success).
Reported-by: Ben Humphreys <behumphreys@atlassian.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 18 May 2021 06:27:36 +0000 (02:27 -0400)]
t5551: test http interaction with credential helpers
We test authentication with http, and we independently test that
credential helpers work, but we don't have any tests that cover the
two features working together. Let's add two:
1. Make sure that a successful request asks the helper to save the
credential. This works as expected.
2. Make sure that a failed request asks the helper to forget the
credential. This is marked as expect_failure, as it was recently
regressed by 1b0d9545bb (remote-curl: fall back to basic auth if
Negotiate fails, 2021-03-22). The symptom here is that the second
request should prompt the user, but doesn't.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 17 May 2021 12:22:17 +0000 (12:22 +0000)]
sparse-index: fix uninitialized jump
While testing the sparse-index, I verified a test with --valgrind and it
complained about an uninitialized value being used in a jump in the
path_matches_pattern_list() method. The line was this one:
if (*dtype == DT_UNKNOWN)
In the call stack, the culprit was the initialization of the dtype
variable in convert_to_sparse_rec().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Todd Zullinger [Mon, 17 May 2021 15:12:22 +0000 (11:12 -0400)]
t7500: remove non-existant C_LOCALE_OUTPUT prereq
The C_LOCALE_OUTPUT prerequisite was removed in b1e079807b (tests:
remove last uses of C_LOCALE_OUTPUT, 2021-02-11), where Ævar noted:
I'm not leaving the prerequisite itself in place for in-flight changes
as there currently are none that introduce new tests that rely on it,
and because C_LOCALE_OUTPUT is currently a noop on the master branch
we likely won't have any new submissions that use it.
One more use of C_LOCALE_OUTPUT did creep in with 3d1bda6b5b (t7500: add
tests for --fixup=[amend|reword] options, 2021-03-15). This causes a
number of the tests to be skipped by default:
ok 35 # SKIP --fixup=reword: incompatible with --all (missing C_LOCALE_OUTPUT)
ok 36 # SKIP --fixup=reword: incompatible with --include (missing C_LOCALE_OUTPUT)
ok 37 # SKIP --fixup=reword: incompatible with --only (missing C_LOCALE_OUTPUT)
ok 38 # SKIP --fixup=reword: incompatible with --interactive (missing C_LOCALE_OUTPUT)
ok 39 # SKIP --fixup=reword: incompatible with --patch (missing C_LOCALE_OUTPUT)
Remove the C_LOCALE_OUTPUT prerequisite from these tests so they are
not skipped.
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wolfgang Müller [Mon, 17 May 2021 08:02:42 +0000 (10:02 +0200)]
rev-parse: fix segfault with missing --path-format argument
Calling "git rev-parse --path-format" without an argument segfaults
instead of giving an error message. Commit fac60b8925 (rev-parse: add
option for absolute or relative path formatting, 2020-12-13) added the
argument parsing code but forgot to handle NULL.
Returning an error makes sense here because there is no default value we
could use. Add a test case to verify.
Signed-off-by: Wolfgang Müller <wolf@oriole.systems> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 16 May 2021 12:05:24 +0000 (21:05 +0900)]
Merge branch 'dl/stash-show-untracked-fixup'
The code to handle options recently added to "git stash show"
around untracked part of the stash segfaulted when these options
were used on a stash entry that does not record untracked part.
* dl/stash-show-untracked-fixup:
stash show: fix segfault with --{include,only}-untracked
t3905: correct test title
Junio C Hamano [Sun, 16 May 2021 12:05:23 +0000 (21:05 +0900)]
Merge branch 'mt/parallel-checkout-part-3'
The final part of "parallel checkout".
* mt/parallel-checkout-part-3:
ci: run test round with parallel-checkout enabled
parallel-checkout: add tests related to .gitattributes
t0028: extract encoding helpers to lib-encoding.sh
parallel-checkout: add tests related to path collisions
parallel-checkout: add tests for basic operations
checkout-index: add parallel checkout support
builtin/checkout.c: complete parallel checkout support
make_transient_cache_entry(): optionally alloc from mem_pool
Jeff King [Thu, 13 May 2021 06:25:53 +0000 (02:25 -0400)]
t: avoid sed-based chain-linting in some expensive cases
Commit 878f988350 (t/test-lib: teach --chain-lint to detect broken
&&-chains in subshells, 2018-07-11) introduced additional chain-lint
tests which add an extra "sed" pipeline to each test we run. This has a
measurable impact on runtime. Here are timings with and without a new
environment variable (added by this patch) that lets you disable just
the additional sed-based chain-lint tests:
Benchmark #1: GIT_TEST_CHAIN_LINT_HARDER=1 make test
Time (mean ± σ): 64.202 s ± 1.030 s [User: 622.469 s, System: 301.402 s]
Range (min … max): 61.571 s … 65.662 s 10 runs
Benchmark #2: GIT_TEST_CHAIN_LINT_HARDER=0 make test
Time (mean ± σ): 57.591 s ± 0.333 s [User: 529.368 s, System: 270.618 s]
Range (min … max): 57.143 s … 58.309 s 10 runs
Summary
'GIT_TEST_CHAIN_LINT_HARDER=0 make test' ran
1.11 ± 0.02 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=1 make test'
Of course those extra lint checks are doing something useful, so paying
a few extra seconds (at least on Linux) isn't so bad (though note the
CPU time; we're bounded in our parallel run here by the slowest test, so
it really is ~120s of CPU improvement).
But we can observe that there are some test scripts where they produce a
much stronger effect, and provide less value. In t0027 and t3070 we run
a very large number of small tests, all driven by a series of
functions/loops which are filling in the test bodies. There we get much
less bang for our buck in terms of bug-finding versus CPU cost.
This patch introduces a mechanism for controlling when those extra
lint checks are run, at two levels:
- a user can ask to disable or to force-enable the checks by setting
GIT_TEST_CHAIN_LINT_HARDER
- if the user hasn't specified a preference, individual scripts can
disable the checks by setting GIT_TEST_CHAIN_LINT_HARDER_DEFAULT;
scripts which don't set that get the current behavior of enabling
them.
In addition, this patch flips the default for t0027 and t3070's
mass-generated sections to disable the extra checks. Here are the timing
results for t0027:
Benchmark #1: GIT_TEST_CHAIN_LINT_HARDER=1 ./t0027-auto-crlf.sh
Time (mean ± σ): 17.078 s ± 0.848 s [User: 14.878 s, System: 7.075 s]
Range (min … max): 15.952 s … 18.421 s 10 runs
Benchmark #2: GIT_TEST_CHAIN_LINT_HARDER=0 ./t0027-auto-crlf.sh
Time (mean ± σ): 9.063 s ± 0.759 s [User: 7.890 s, System: 3.362 s]
Range (min … max): 7.747 s … 10.619 s 10 runs
Benchmark #3: ./t0027-auto-crlf.sh
Time (mean ± σ): 9.186 s ± 0.881 s [User: 7.957 s, System: 3.427 s]
Range (min … max): 7.796 s … 10.498 s 10 runs
Summary
'GIT_TEST_CHAIN_LINT_HARDER=0 ./t0027-auto-crlf.sh' ran
1.01 ± 0.13 times faster than './t0027-auto-crlf.sh'
1.88 ± 0.18 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=1 ./t0027-auto-crlf.sh'
We can see that disabling the checks for the whole script buys us an
almost 2x speedup. But the new default behavior, disabling them only for
the mass-generated part, gets us most of that speedup (but still leaves
the checks on for further manual tests people might write).
As a side note, I'd caution about comparing runtimes and CPU seconds
between this timing and the earlier "make test" one. In "make test",
we're running a lot of scripts in parallel, so the CPU is throttling
down (and thus a CPU second saved here would count for more during a
parallel run; the same work takes more CPU seconds there).
We get similar results for t3070:
Benchmark #1: GIT_TEST_CHAIN_LINT_HARDER=1 ./t3070-wildmatch.sh
Time (mean ± σ): 20.054 s ± 3.967 s [User: 16.003 s, System: 8.286 s]
Range (min … max): 11.891 s … 23.671 s 10 runs
Benchmark #2: GIT_TEST_CHAIN_LINT_HARDER=0 ./t3070-wildmatch.sh
Time (mean ± σ): 12.399 s ± 2.256 s [User: 7.542 s, System: 5.342 s]
Range (min … max): 9.606 s … 15.727 s 10 runs
Benchmark #3: ./t3070-wildmatch.sh
Time (mean ± σ): 10.726 s ± 3.476 s [User: 6.790 s, System: 4.365 s]
Range (min … max): 5.444 s … 15.376 s 10 runs
Summary
'./t3070-wildmatch.sh' ran
1.16 ± 0.43 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=0 ./t3070-wildmatch.sh'
1.87 ± 0.71 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=1 ./t3070-wildmatch.sh'
Again, we get almost a 2x speedup disabling these. In this case, there
are no tests not covered by the script's "default to disable" behavior,
so the second two benchmarks should be the same (and while they do
differ, you can see the variance is quite high but they're within one
standard deviation).
So it seems like for these two scripts, at least, disabling the extra
checks is a reasonable tradeoff. Sadly, the overall runtime of "make
test" on my system doesn't get much faster. But that's because we're
mostly limited by the cost of the single biggest test. Here are the
top-5 tests by wall-clock time from a parallel run, before my patch:
We dropped 12s from t0027, and t3070 dropped off our list entirely at
around 16s. In both cases we're bound by t9001, but its slowness is
due to the actual tests, so we'll have to deal with it in a different
way. But this reduces overall CPU, and means that dealing with t9001 (by
improving the speed of send-email or splitting it apart) will let us
reduce our overall runtime even on multi-core machines.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Thu, 13 May 2021 06:22:36 +0000 (06:22 +0000)]
git-prompt: work under set -u
Commit afda36dbf3 ("git-prompt: include sparsity state as well",
2020-06-21) added the use of some variables to control how to show
sparsity state in the git prompt, but implicitly assumed that undefined
variables would be treated as the empty string. This breaks users who
run under 'set -u'; fix the code to be more explicit.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Wed, 12 May 2021 20:16:13 +0000 (13:16 -0700)]
stash show: fix segfault with --{include,only}-untracked
When `git stash show --include-untracked` or
`git stash show --only-untracked` is run on a stash that doesn't include
an untracked entry, a segfault occurs. This happens because we do not
check whether the untracked entry is actually present and just attempt
to blindly dereference it.
Ensure that the untracked entry is present before actually attempting to
dereference it.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Wed, 12 May 2021 17:28:21 +0000 (17:28 +0000)]
dir: update stale description of treat_directory()
The documentation comment for treat_directory() was originally written
in 095952 (Teach directory traversal about subprojects, 2007-04-11)
which was before the 'struct dir_struct' split its bitfield of named
options into a 'flags' enum in 7c4c97c0 (Turn the flags in struct
dir_struct into a single variable, 2009-02-16). When those flags
changed, the comment became stale, since members like
'show_other_directories' transitioned into flags like
DIR_SHOW_OTHER_DIRECTORIES.
Update the comments for treat_directory() to use these flag names rather
than the old member names.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 12 May 2021 17:28:20 +0000 (17:28 +0000)]
dir: traverse into untracked directories if they may have ignored subfiles
A directory that is untracked does not imply that all files under it
should be categorized as untracked; in particular, if the caller is
interested in ignored files, many files or directories underneath the
untracked directory may be ignored. We previously partially handled
this right with DIR_SHOW_IGNORED_TOO, but missed DIR_SHOW_IGNORED. It
was not obvious, though, because the logic for untracked and excluded
files had been fused together making it harder to reason about. The
previous commit split that logic out, making it easier to notice that
DIR_SHOW_IGNORED was missing. Add it.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 12 May 2021 17:28:19 +0000 (17:28 +0000)]
dir: avoid unnecessary traversal into ignored directory
The show_other_directories case in treat_directory() tried to handle
both excludes and untracked files with the same logic, and mishandled
both the excludes and the untracked files in the process, in different
ways. Split that logic apart, and then focus on the logic for the
excludes; a subsequent commit will address the logic for untracked
files.
For show_other_directories, an excluded directory means that
every path underneath that directory will also be excluded. Given that
the calling code requested to just show directories when everything
under a directory had the same state (that's what the
"DIR_SHOW_OTHER_DIRECTORIES" flag means), we generally do not need to
traverse into such directories and can just immediately mark them as
ignored (i.e. as path_excluded). The only reason we cannot just
immediately return path_excluded is the DIR_HIDE_EMPTY_DIRECTORIES flag
and the possibility that the ignored directory is an empty directory.
The code previously treated DIR_SHOW_IGNORED_TOO in most cases as an
exception as well, which was wrong. It can sometimes reduce the number
of cases where we need to recurse (namely if
DIR_SHOW_IGNORED_TOO_MODE_MATCHING is also set), but should not be able
to increase the number of cases where we need to recurse. Fix the logic
accordingly.
Some sidenotes about possible confusion with dir.c:
* "ignored" often refers to an untracked ignore", i.e. a file which is
not tracked which matches one of the ignore/exclusion rules. But you
can also have a "tracked ignore", a tracked file that happens to match
one of the ignore/exclusion rules and which dir.c has to worry about
since "git ls-files -c -i" is supposed to list them.
* The dir code often uses "ignored" and "excluded" interchangeably,
which you need to keep in mind while reading the code.
* "exclude" is used multiple ways in the code:
* As noted above, "exclude" is often a synonym for "ignored".
* The logic for parsing .gitignore files was re-used in
.git/info/sparse-checkout, except there it is used to mark paths that
the user wants to *keep*. This was mostly addressed by commit 65edd96aec ("treewide: rename 'exclude' methods to 'pattern'",
2019-09-03), but every once in a while you'll find a comment about
"exclude" referring to these patterns that might in fact be in use
by the sparse-checkout machinery for inclusion rules.
* The word "EXCLUDE" is also used for pathspec negation, as in
(pathspec->items[3].magic & PATHSPEC_EXCLUDE)
Thus if a user had a .gitignore file containing
*~
*.log
!settings.log
And then ran
git add -- 'settings.*' ':^settings.log'
Then :^settings.log is a pathspec negation making settings.log not
be requested to be added even though all other settings.* files are
being added. Also, !settings.log in the gitignore file is a negative
exclude pattern meaning that settings.log is normally a file we
want to track even though all other *.log files are ignored.
Sometimes it feels like dir.c needs its own glossary with its many
definitions, including the multiply-defined terms.
Reported-by: Jason Gore <Jason.Gore@microsoft.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the last commit, we added a testcase showing that the directory
traversal machinery sometimes traverses into directories unnecessarily.
Here we show that there are cases where it does the opposite: it does
not traverse into directories, despite those directories having
important files that need to be flagged.
Add a testcase showing that `git ls-files -o -i --directory` can omit
some of the files it should be listing, and another showing that `git
clean -fX` can fail to clean out some of the expected files.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 12 May 2021 17:28:17 +0000 (17:28 +0000)]
t7300: add testcase showing unnecessary traversal into ignored directory
The PNPM package manager is apparently creating deeply nested (but
ignored) directory structures; traversing them is costly
performance-wise, unnecessary, and in some cases is even throwing
warnings/errors because the paths are too long to handle on various
platforms. Add a testcase that checks for such unnecessary directory
traversal.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 12 May 2021 17:28:16 +0000 (17:28 +0000)]
ls-files: error out on -i unless -o or -c are specified
ls-files --ignored can be used together with either --others or
--cached. After being perplexed for a bit and digging in to the code, I
assumed that ls-files -i was just broken and not printing anything and
I had a nice patch ready to submit when I finally realized that -i can be
used with --cached to find tracked ignores.
While that was a mistake on my part, and a careful reading of the
documentation could have made this more clear, I suspect this is an
error others are likely to make as well. In fact, of two uses in our
testsuite, I believe one of the two did make this error. In t1306.13,
there are NO tracked files, and all the excludes built up and used in
that test and in previous tests thus have to be about untracked files.
However, since they were looking for an empty result, the mistake went
unnoticed as their erroneous command also just happened to give an empty
answer.
-i will most the time be used with -o, which would suggest we could just
make -i imply -o in the absence of either a -o or -c, but that would be
a backward incompatible break. Instead, let's just flag -i without
either a -o or -c as an error, and update the two relevant testcases to
specify their intent.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 12 May 2021 17:28:15 +0000 (17:28 +0000)]
dir: report number of visited directories and paths with trace2
Provide more statistics in trace2 output that include the number of
directories and total paths visited by the directory traversal logic.
Subsequent patches will take advantage of this to ensure we do not
unnecessarily traverse into ignored directories.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 07d90eadb50 (Makefile: add Perl runtime prefix support,
2018-04-10) PERL_DEFINES has been a simply-expanded variable, let's
make it recursively expanded instead.
This change doesn't matter for the correctness of the logic. Whether
we used simply-expanded or recursively expanded didn't change what we
wrote out in GIT-PERL-DEFINES, but being consistent with other rules
makes this easier to understand.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Tue, 11 May 2021 10:37:30 +0000 (10:37 +0000)]
remote-curl: fix clone on sha256 repos
The remote-https process needs to update it's own instance of
`the_repository' when it sees an HTTP(S) remote is using sha256.
Without this, parse_oid_hex() fails to handle sha256 OIDs when
it's eventually called by parse_fetch().
ZheNing Hu [Tue, 11 May 2021 15:35:20 +0000 (15:35 +0000)]
ref-filter: fix read invalid union member bug
used_atom.u is an union, and it has different members depending on
what atom the auxiliary data the union part of the "struct
used_atom" wants to record. At most only one of the members can be
valid at any one time. Since the code checks u.remote_ref without
even making sure if the atom is "push" or "push:" (which are only
two cases that u.remote_ref.push becomes valid), but u.remote_ref
shares the same storage for other members of the union, the check
was reading from an invalid member, which was the bug.
Modify the condition here to check whether the atom name
equals to "push" or starts with "push:", to avoid reading the
value of invalid member of the union.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
[jc: further test fixes] Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lénaïc Huard [Mon, 10 May 2021 19:59:09 +0000 (21:59 +0200)]
maintenance: fix two memory leaks
Fixes two memory leaks when running `git maintenance start` or `git
maintenance stop` in `update_background_schedule`:
$ valgrind --leak-check=full ~/git/bin/git maintenance start
==76584== Memcheck, a memory error detector
==76584== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
==76584== Using Valgrind-3.16.1 and LibVEX; rerun with -h for copyright info
==76584== Command: /home/lenaic/git/bin/git maintenance start
==76584==
==76584==
==76584== HEAP SUMMARY:
==76584== in use at exit: 34,880 bytes in 252 blocks
==76584== total heap usage: 820 allocs, 568 frees, 146,414 bytes allocated
==76584==
==76584== 65 bytes in 1 blocks are definitely lost in loss record 17 of 39
==76584== at 0x483E6AF: malloc (vg_replace_malloc.c:306)
==76584== by 0x3DC39C: xrealloc (wrapper.c:126)
==76584== by 0x3992CC: strbuf_grow (strbuf.c:98)
==76584== by 0x39A473: strbuf_vaddf (strbuf.c:392)
==76584== by 0x39BC54: xstrvfmt (strbuf.c:979)
==76584== by 0x39BD2C: xstrfmt (strbuf.c:989)
==76584== by 0x18451B: update_background_schedule (gc.c:1977)
==76584== by 0x1846F6: maintenance_start (gc.c:2011)
==76584== by 0x1847B4: cmd_maintenance (gc.c:2030)
==76584== by 0x127A2E: run_builtin (git.c:453)
==76584== by 0x127E81: handle_builtin (git.c:704)
==76584== by 0x128142: run_argv (git.c:771)
==76584==
==76584== 240 bytes in 1 blocks are definitely lost in loss record 29 of 39
==76584== at 0x4840D7B: realloc (vg_replace_malloc.c:834)
==76584== by 0x491CE5D: getdelim (in /usr/lib/libc-2.33.so)
==76584== by 0x39ADD7: strbuf_getwholeline (strbuf.c:635)
==76584== by 0x39AF31: strbuf_getdelim (strbuf.c:706)
==76584== by 0x39B064: strbuf_getline_lf (strbuf.c:727)
==76584== by 0x184273: crontab_update_schedule (gc.c:1919)
==76584== by 0x184678: update_background_schedule (gc.c:1997)
==76584== by 0x1846F6: maintenance_start (gc.c:2011)
==76584== by 0x1847B4: cmd_maintenance (gc.c:2030)
==76584== by 0x127A2E: run_builtin (git.c:453)
==76584== by 0x127E81: handle_builtin (git.c:704)
==76584== by 0x128142: run_argv (git.c:771)
==76584==
==76584== LEAK SUMMARY:
==76584== definitely lost: 305 bytes in 2 blocks
==76584== indirectly lost: 0 bytes in 0 blocks
==76584== possibly lost: 0 bytes in 0 blocks
==76584== still reachable: 34,575 bytes in 250 blocks
==76584== suppressed: 0 bytes in 0 blocks
==76584== Reachable blocks (those to which a pointer was found) are not shown.
==76584== To see them, rerun with: --leak-check=full --show-leak-kinds=all
==76584==
==76584== For lists of detected and suppressed errors, rerun with: -s
==76584== ERROR SUMMARY: 2 errors from 2 contexts (suppressed: 0 from 0)
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr> Acked-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 11 May 2021 06:27:23 +0000 (15:27 +0900)]
Merge branch 'zh/trailer-cmd'
The way the command line specified by the trailer.<token>.command
configuration variable receives the end-user supplied value was
both error prone and misleading. An alternative to achieve the
same goal in a safer and more intuitive way has been added, as
the trailer.<token>.cmd configuration variable, to replace it.
* zh/trailer-cmd:
trailer: add new .cmd config option
docs: correct descript of trailer.<token>.command
Junio C Hamano [Tue, 11 May 2021 06:27:23 +0000 (15:27 +0900)]
Merge branch 'jk/symlinked-dotgitx-cleanup'
Various test and documentation updates about .gitsomething paths
that are symlinks.
* jk/symlinked-dotgitx-cleanup:
docs: document symlink restrictions for dot-files
fsck: warn about symlinked dotfiles we'll open with O_NOFOLLOW
t0060: test ntfs/hfs-obscured dotfiles
t7450: test .gitmodules symlink matching against obscured names
t7450: test verify_path() handling of gitmodules
t7415: rename to expand scope
fsck_tree(): wrap some long lines
fsck_tree(): fix shadowed variable
t7415: remove out-dated comment about translation
Options to "git pack-objects" that take numeric values like
--window and --depth should not accept negative values; the input
validation has been tightened.
* jk/pack-objects-negative-options-fix:
pack-objects: clamp negative depth to 0
t5316: check behavior of pack-objects --depth=0
pack-objects: clamp negative window size to 0
t5300: check that we produced expected number of deltas
t5300: modernize basic tests
Will Chandler [Sat, 8 May 2021 05:00:43 +0000 (01:00 -0400)]
refs: cleanup directories when deleting packed ref
When deleting a packed ref via 'update-ref -d', a lockfile is made in
the directory that would contain the loose copy of that ref, creating
any directories in the ref's path that do not exist. When the
transaction completes, the lockfile is deleted, but any empty parent
directories made when creating the lockfile are left in place. These
empty directories are not removed by 'pack-refs' or other housekeeping
tasks and will accumulate over time.
When deleting a loose ref, we remove all empty parent directories at the
end of the transaction.
This commit applies the parent directory cleanup logic used when
deleting loose refs to packed refs as well.
Signed-off-by: Will Chandler <wfc@wfchandler.org> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alex Henrie [Sun, 9 May 2021 21:52:50 +0000 (15:52 -0600)]
merge-ort: split "distinct types" message into two translatable messages
The word "renamed" has two possible translations in many European
languages depending on whether one thing was renamed or two things were
renamed. Give translators freedom to alter any part of the message to
make it sound right in their language.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Acked-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 10 May 2021 07:59:47 +0000 (16:59 +0900)]
Merge branch 'ls/subtree'
"git subtree" updates.
* ls/subtree: (30 commits)
subtree: be stricter about validating flags
subtree: push: allow specifying a local rev other than HEAD
subtree: allow 'split' flags to be passed to 'push'
subtree: allow --squash to be used with --rejoin
subtree: give the docs a once-over
subtree: have $indent actually affect indentation
subtree: don't let debug and progress output clash
subtree: add comments and sanity checks
subtree: remove duplicate check
subtree: parse revs in individual cmd_ functions
subtree: use "^{commit}" instead of "^0"
subtree: don't fuss with PATH
subtree: use "$*" instead of "$@" as appropriate
subtree: use more explicit variable names for cmdline args
subtree: use git-sh-setup's `say`
subtree: use `git merge-base --is-ancestor`
subtree: drop support for git < 1.7
subtree: more consistent error propagation
subtree: don't have loose code outside of a function
subtree: t7900: add porcelain tests for 'pull' and 'push'
...
Junio C Hamano [Mon, 10 May 2021 07:59:46 +0000 (16:59 +0900)]
Merge branch 'bc/hash-transition-interop-part-1'
SHA-256 transition.
* bc/hash-transition-interop-part-1:
hex: print objects using the hash algorithm member
hex: default to the_hash_algo on zero algorithm value
builtin/pack-objects: avoid using struct object_id for pack hash
commit-graph: don't store file hashes as struct object_id
builtin/show-index: set the algorithm for object IDs
hash: provide per-algorithm null OIDs
hash: set, copy, and use algo field in struct object_id
builtin/pack-redundant: avoid casting buffers to struct object_id
Use the final_oid_fn to finalize hashing of object IDs
hash: add a function to finalize object IDs
http-push: set algorithm when reading object ID
Always use oidread to read into struct object_id
hash: add an algo member to struct object_id
projects / thirdparty / git.git / log
