Junio C Hamano [Fri, 2 Nov 2018 15:53:58 +0000 (00:53 +0900)]
Merge branch 'mg/gpg-fingerprint'
New "--pretty=format:" placeholders %GF and %GP that show the GPG
key fingerprints have been invented.
* mg/gpg-fingerprint:
gpg-interface.c: obtain primary key fingerprint as well
gpg-interface.c: support getting key fingerprint via %GF format
gpg-interface.c: use flags to determine key/signer info presence
Junio C Hamano [Fri, 2 Nov 2018 15:53:57 +0000 (00:53 +0900)]
Merge branch 'en/merge-cleanup-more'
Further clean-up of merge-recursive machinery.
* en/merge-cleanup-more:
merge-recursive: avoid showing conflicts with merge branch before HEAD
merge-recursive: improve auto-merging messages with path collisions
Junio C Hamano [Fri, 2 Nov 2018 02:04:58 +0000 (11:04 +0900)]
Merge branch 'js/rebase-i-break'
"git rebase -i" learned a new insn, 'break', that the user can
insert in the to-do list. Upon hitting it, the command returns
control back to the user.
* js/rebase-i-break:
rebase -i: introduce the 'break' command
rebase -i: clarify what happens on a failed `exec`
Junio C Hamano [Fri, 2 Nov 2018 02:04:58 +0000 (11:04 +0900)]
Merge branch 'js/rebase-autostash-fix'
"git rebase" that has recently been rewritten in C had a few issues
in its "--autstash" feature, which have been corrected.
* js/rebase-autostash-fix:
rebase --autostash: fix issue with dirty submodules
rebase --autostash: demonstrate a problem with dirty submodules
rebase (autostash): use an explicit OID to apply the stash
rebase (autostash): store the full OID in <state-dir>/autostash
rebase (autostash): avoid duplicate call to state_dir_path()
"rebase" that has been rewritten learns the new calling convention
used by "rebase -i" that was rewritten in C, tying the loose end
between two GSoC topics that stomped on each other's toes.
* js/rebase-in-c-5.5-work-with-rebase-i-in-c:
builtin rebase: prepare for builtin rebase -i
Junio C Hamano [Fri, 2 Nov 2018 02:04:55 +0000 (11:04 +0900)]
Merge branch 'pk/rebase-in-c-5-test'
Rewrite "git rebase" in C.
* pk/rebase-in-c-5-test:
builtin rebase: error out on incompatible option/mode combinations
builtin rebase: use no-op editor when interactive is "implied"
builtin rebase: show progress when connected to a terminal
builtin rebase: fast-forward to onto if it is a proper descendant
builtin rebase: optionally pass custom reflogs to reset_head()
builtin rebase: optionally auto-detect the upstream
Junio C Hamano [Fri, 2 Nov 2018 02:04:55 +0000 (11:04 +0900)]
Merge branch 'pk/rebase-in-c-4-opts'
Rewrite "git rebase" in C.
* pk/rebase-in-c-4-opts:
builtin rebase: support --root
builtin rebase: add support for custom merge strategies
builtin rebase: support `fork-point` option
merge-base --fork-point: extract libified function
builtin rebase: support --rebase-merges[=[no-]rebase-cousins]
builtin rebase: support `--allow-empty-message` option
builtin rebase: support `--exec`
builtin rebase: support `--autostash` option
builtin rebase: support `-C` and `--whitespace=<type>`
builtin rebase: support `--gpg-sign` option
builtin rebase: support `--autosquash`
builtin rebase: support `keep-empty` option
builtin rebase: support `ignore-date` option
builtin rebase: support `ignore-whitespace` option
builtin rebase: support --committer-date-is-author-date
builtin rebase: support --rerere-autoupdate
builtin rebase: support --signoff
builtin rebase: allow selecting the rebase "backend"
Junio C Hamano [Fri, 2 Nov 2018 02:04:54 +0000 (11:04 +0900)]
Merge branch 'pk/rebase-in-c-3-acts'
Rewrite "git rebase" in C.
* pk/rebase-in-c-3-acts:
builtin rebase: stop if `git am` is in progress
builtin rebase: actions require a rebase in progress
builtin rebase: support --edit-todo and --show-current-patch
builtin rebase: support --quit
builtin rebase: support --abort
builtin rebase: support --skip
builtin rebase: support --continue
Junio C Hamano [Fri, 2 Nov 2018 02:04:53 +0000 (11:04 +0900)]
Merge branch 'pk/rebase-in-c-2-basic'
Rewrite "git rebase" in C.
* pk/rebase-in-c-2-basic:
builtin rebase: support `git rebase <upstream> <switch-to>`
builtin rebase: only store fully-qualified refs in `options.head_name`
builtin rebase: start a new rebase only if none is in progress
builtin rebase: support --force-rebase
builtin rebase: try to fast forward when possible
builtin rebase: require a clean worktree
builtin rebase: support the `verbose` and `diffstat` options
builtin rebase: support --quiet
builtin rebase: handle the pre-rebase hook and --no-verify
builtin rebase: support `git rebase --onto A...B`
builtin rebase: support --onto
Junio C Hamano [Fri, 2 Nov 2018 02:04:53 +0000 (11:04 +0900)]
Merge branch 'ag/rebase-i-in-c'
Rewrite of the remaining "rebase -i" machinery in C.
* ag/rebase-i-in-c:
rebase -i: move rebase--helper modes to rebase--interactive
rebase -i: remove git-rebase--interactive.sh
rebase--interactive2: rewrite the submodes of interactive rebase in C
rebase -i: implement the main part of interactive rebase as a builtin
rebase -i: rewrite init_basic_state() in C
rebase -i: rewrite write_basic_state() in C
rebase -i: rewrite the rest of init_revisions_and_shortrevisions() in C
rebase -i: implement the logic to initialize $revisions in C
rebase -i: remove unused modes and functions
rebase -i: rewrite complete_action() in C
t3404: todo list with commented-out commands only aborts
sequencer: change the way skip_unnecessary_picks() returns its result
sequencer: refactor append_todo_help() to write its message to a buffer
rebase -i: rewrite checkout_onto() in C
rebase -i: rewrite setup_reflog_action() in C
sequencer: add a new function to silence a command, except if it fails
rebase -i: rewrite the edit-todo functionality in C
editor: add a function to launch the sequence editor
rebase -i: rewrite append_todo_help() in C
sequencer: make three functions and an enum from sequencer.c public
Junio C Hamano [Fri, 2 Nov 2018 02:04:52 +0000 (11:04 +0900)]
Merge branch 'pk/rebase-in-c'
Rewrite of the "rebase" machinery in C.
* pk/rebase-in-c:
builtin/rebase: support running "git rebase <upstream>"
rebase: refactor common shell functions into their own file
rebase: start implementing it as a builtin
Junio C Hamano [Tue, 30 Oct 2018 06:43:47 +0000 (15:43 +0900)]
Merge branch 'ss/rename-tests'
Reorganize some tests and rename them; "ls t/" now gives a better
overview of what is tested for these scripts than before.
* ss/rename-tests:
t7501: rename commit test to comply with naming convention
t7500: rename commit tests script to comply with naming convention
t7502: rename commit test script to comply with naming convention
t7509: cleanup description and filename
t2000: rename and combine checkout clash tests
Junio C Hamano [Tue, 30 Oct 2018 06:43:46 +0000 (15:43 +0900)]
Merge branch 'jc/receive-deny-current-branch-fix'
The receive.denyCurrentBranch=updateInstead codepath kicked in even
when the push should have been rejected due to other reasons, such
as it does not fast-forward or the update-hook rejects it, which
has been corrected.
* jc/receive-deny-current-branch-fix:
receive: denyCurrentBranch=updateinstead should not blindly update
Junio C Hamano [Tue, 30 Oct 2018 06:43:45 +0000 (15:43 +0900)]
Merge branch 'js/diff-notice-has-drive-prefix'
Under certain circumstances, "git diff D:/a/b/c D:/a/b/d" on
Windows would strip initial parts from the paths because they
were not recognized as absolute, which has been corrected.
* js/diff-notice-has-drive-prefix:
diff: don't attempt to strip prefix from absolute Windows paths
Junio C Hamano [Tue, 30 Oct 2018 06:43:42 +0000 (15:43 +0900)]
Merge branch 'bc/hash-transition-part-15'
More codepaths are moving away from hardcoded hash sizes.
* bc/hash-transition-part-15:
rerere: convert to use the_hash_algo
submodule: make zero-oid comparison hash function agnostic
apply: rename new_sha1_prefix and old_sha1_prefix
apply: replace hard-coded constants
tag: express constant in terms of the_hash_algo
transport: use parse_oid_hex instead of a constant
upload-pack: express constants in terms of the_hash_algo
refs/packed-backend: express constants using the_hash_algo
packfile: express constants in terms of the_hash_algo
pack-revindex: express constants in terms of the_hash_algo
builtin/fetch-pack: remove constants with parse_oid_hex
builtin/mktree: remove hard-coded constant
builtin/repack: replace hard-coded constants
pack-bitmap-write: use GIT_MAX_RAWSZ for allocation
object_id.cocci: match only expressions of type 'struct object_id'
Junio C Hamano [Tue, 30 Oct 2018 06:43:40 +0000 (15:43 +0900)]
Merge branch 'rv/send-email-cc-misc-by'
"git send-email" learned to grab address-looking string on any
trailer whose name ends with "-by"; --suppress-cc=misc-by on the
command line, or setting sendemail.suppresscc configuration
variable to "misc-by", can be used to disable this behaviour.
This is a backward-incompatible change that may surprise existing
users.
* rv/send-email-cc-misc-by:
send-email: also pick up cc addresses from -by trailers
send-email: only consider lines containing @ or <> for automatic Cc'ing
Documentation/git-send-email.txt: style fixes
Junio C Hamano [Tue, 30 Oct 2018 06:43:39 +0000 (15:43 +0900)]
Merge branch 'md/filter-trees'
The "rev-list --filter" feature learned to exclude all trees via
"tree:0" filter.
* md/filter-trees:
list-objects: support for skipping tree traversal
filter-trees: code clean-up of tests
list-objects-filter: implement filter tree:0
list-objects-filter-options: do not over-strbuf_init
list-objects-filter: use BUG rather than die
revision: mark non-user-given objects instead
rev-list: handle missing tree objects properly
list-objects: always parse trees gently
list-objects: refactor to process_tree_contents
list-objects: store common func args in struct
sequencer: cleanup for gcc warning in non developer mode
as shown by:
sequencer.c: In function ‘write_basic_state’:
sequencer.c:2392:37: warning: zero-length gnu_printf format string [-Wformat-zero-length]
write_file(rebase_path_verbose(), "");
where write_file will create an empty file if told to write an empty string
as can be inferred by the previous call
the somehow more convoluted syntax works around the issue by providing a non
empty format string and is already being used for the abort safety file since 1e41229d96 ("sequencer: make sequencer abort safer", 2016-12-07)
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 26 Oct 2018 05:22:15 +0000 (14:22 +0900)]
Merge branch 'js/mingw-default-ident'
The logic to select the default user name and e-mail on Windows has
been improved.
* js/mingw-default-ident:
mingw: use domain information for default email
getpwuid(mingw): provide a better default for the user name
getpwuid(mingw): initialize the structure only once
Junio C Hamano [Fri, 26 Oct 2018 05:22:15 +0000 (14:22 +0900)]
Merge branch 'ld/p4-unshelve'
"git p4 unshelve" improvements.
* ld/p4-unshelve:
git-p4: fully support unshelving changelists
git-p4: unshelve into refs/remotes/p4-unshelved, not refs/remotes/p4/unshelved
git-p4: do not fail in verbose mode for missing 'fileSize' key
Junio C Hamano [Fri, 26 Oct 2018 05:22:14 +0000 (14:22 +0900)]
Merge branch 'ab/gc-doc-update'
The documentation of "git gc" has been updated to mention that it
is no longer limited to "pruning away crufts" but also updates
ancillary files like commit-graph as a part of repository
optimization.
* ab/gc-doc-update:
gc doc: mention the commit-graph in the intro
Junio C Hamano [Fri, 26 Oct 2018 05:22:13 +0000 (14:22 +0900)]
Merge branch 'rv/alias-help'
"git cmd --help" when "cmd" is aliased used to only say "cmd is
aliased to ...". Now it shows that to the standard error stream
and runs "git $cmd --help" where $cmd is the first word of the
alias expansion.
This could be misleading for those who alias a command with options
(e.g. with "[alias] cpn = cherry-pick -n", "git cpn --help" would
show the manual of "cherry-pick", and the reader would not be told
to pay close attention to the part that describes the "--no-commit"
option until closing the pager that showed the contents of the
manual, if the pager is configured to restore the original screen,
or would not be told at all, if the pager simply makes the message
on the standard error scroll away.
* rv/alias-help:
git-help.txt: document "git help cmd" vs "git cmd --help" for aliases
git.c: handle_alias: prepend alias info when first argument is -h
help: redirect to aliased commands for "git cmd --help"
Junio C Hamano [Fri, 26 Oct 2018 05:22:11 +0000 (14:22 +0900)]
Merge branch 'np/log-graph-octopus-fix'
"git log --graph" showing an octopus merge sometimes miscounted the
number of display columns it is consuming to show the merge and its
parent commits, which has been corrected.
* np/log-graph-octopus-fix:
log: fix coloring of certain octopus merge shapes
Junio C Hamano [Fri, 26 Oct 2018 05:22:10 +0000 (14:22 +0900)]
Merge branch 'sg/split-index-racefix'
The codepath to support the experimental split-index mode had
remaining "racily clean" issues fixed.
* sg/split-index-racefix:
split-index: BUG() when cache entry refers to non-existing shared entry
split-index: smudge and add racily clean cache entries to split index
split-index: don't compare cached data of entries already marked for split index
split-index: count the number of deleted entries
t1700-split-index: date back files to avoid racy situations
split-index: add tests to demonstrate the racy split index problem
t1700-split-index: document why FSMONITOR is disabled in this test script
Junio C Hamano [Fri, 26 Oct 2018 05:22:10 +0000 (14:22 +0900)]
Merge branch 'ds/coverage-diff'
The result of coverage test can be combined with "git blame" to
check the test coverage of code introduced recently with a new
'coverage-diff' tool (in contrib/).
Junio C Hamano [Fri, 26 Oct 2018 05:22:08 +0000 (14:22 +0900)]
Merge branch 'rs/subtree-fixes'
Various subtree fixes.
* rs/subtree-fixes:
subtree: performance improvement for finding unexpected parent commits
subtree: improve decision on merges kept in split
subtree: use commits before rejoins for splits
subtree: make --ignore-joins pay attention to adds
subtree: refactor split of a commit into standalone method
Jeff King [Wed, 24 Oct 2018 07:27:52 +0000 (03:27 -0400)]
upload-pack: fix broken if/else chain in config callback
The upload_pack_config() callback uses an if/else chain
like:
if (!strcmp(var, "a"))
...
else if (!strcmp(var, "b"))
...
etc
This works as long as the conditions are mutually exclusive,
but one of them is not. 20b20a22f8 (upload-pack: provide a
hook for running pack-objects, 2016-05-18) added:
else if (current_config_scope() != CONFIG_SCOPE_REPO) {
... check some more options ...
}
That was fine in that commit, because it came at the end of
the chain. But later, 10ac85c785 (upload-pack: add object
filtering for partial clone, 2017-12-08) did this:
else if (current_config_scope() != CONFIG_SCOPE_REPO) {
... check some more options ...
} else if (!strcmp("uploadpack.allowfilter", var))
...
We'd always check the scope condition first, meaning we'd
_only_ respect allowfilter when it's in the repo config. You
can see this with:
git -c uploadpack.allowfilter=true upload-pack . | head -1
which will not advertise the filter capability (but will
after this patch). We never noticed because:
- our tests always set it in the repo config
- in protocol v2, we use a different code path that
actually calls repo_config_get_bool() separately, so
that _does_ work. Real-world people experimenting with
this may be using v2.
The more recent uploadpack.allowrefinwant option is in the
same boat.
There are a few possible fixes:
1. Bump the scope conditional back to the bottom of the
chain. But that just means somebody else is likely to
make the same mistake later.
2. Make the conditional more like the others. I.e.:
else if (!current_config_scope() != CONFIG_SCOPE_REPO &&
!strcmp(var, "uploadpack.notallowedinrepo"))
This works, but the idea of the original structure was
that we may grow multiple sensitive options like this.
3. Pull it out of the chain entirely. The chain mostly
serves to avoid extra strcmp() calls after we've found
a match. But it's not worth caring about those. In the
worst case, when there isn't a match, we're already
hitting every strcmp (and this happens regularly for
stuff like "core.bare", etc).
This patch does (3).
Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
compat: make sure git_mmap is not expected to write
in f48000fc ("Yank writing-back support from gitfakemmap.", 2005-10-08)
support for writting back changes was removed but the specific prot
flag that would be used was not checked for
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lucas De Marchi [Wed, 24 Oct 2018 19:46:17 +0000 (12:46 -0700)]
range-diff: allow to diff files regardless of submodule config
If we have `submodule.diff = log' in the configuration file
or `--submodule=log' is given as argument, range-diff fails
to compare both diffs and we only get the following output:
It turns out that S_ISGITLINK will return true (mode == 0160000 here).
Similar thing happens if submodule.diff is "diff".
Do like it's done in grep.c when calling fill_filespec() and force it to
be recognized as a file by adding S_IFREG to the mode.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without passing --allow-unrelated-histories the command sequence
fails as intended since commit e379fdf34fee ("merge: refuse to create
too cool a merge by default"). To setup a subtree merging unrelated
histories is normal, so add the option to the howto document.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Wed, 24 Oct 2018 16:25:37 +0000 (12:25 -0400)]
completion: support `git mergetool --[no-]gui`
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Anmol Mago <anmolmago@gmail.com> Signed-off-by: Brian Ho <briankyho@gmail.com> Signed-off-by: David Lu <david.lu97@outlook.com> Signed-off-by: Ryan Wang <shirui.wang@hotmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Wed, 24 Oct 2018 16:25:31 +0000 (12:25 -0400)]
mergetool: accept -g/--[no-]gui as arguments
In line with how difftool accepts a -g/--[no-]gui option, make mergetool
accept the same option in order to use the `merge.guitool` variable to
find the default mergetool instead of `merge.tool`.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Anmol Mago <anmolmago@gmail.com> Signed-off-by: Brian Ho <briankyho@gmail.com> Signed-off-by: David Lu <david.lu97@outlook.com> Signed-off-by: Ryan Wang <shirui.wang@hotmail.com> Acked-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 24 Oct 2018 07:37:06 +0000 (03:37 -0400)]
t5410: use longer path for sample script
t5410 creates a sample script "alternate-refs", and sets
core.alternateRefsCommand to just "alternate-refs". That
shouldn't work, as "." is not in our $PATH, and so we should
not find it.
However, due to a bug in run-command.c, we sometimes find it
anyway! Even more confusing, this bug is only in the
fork-based version of run-command. So the test passes on
Linux (etc), but fails on Windows.
In preparation for fixing the run-command bug, let's use a
more complete path here.
Reported-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 24 Oct 2018 07:38:00 +0000 (03:38 -0400)]
run-command: mark path lookup errors with ENOENT
Since commit e3a434468f (run-command: use the
async-signal-safe execv instead of execvp, 2017-04-19),
prepare_cmd() does its own PATH lookup for any commands we
run (on non-Windows platforms).
However, its logic does not match the old execvp call when
we fail to find a matching entry in the PATH. Instead of
feeding the name directly to execv, execvp would consider
that an ENOENT error. By continuing and passing the name
directly to execv, we effectively behave as if "." was
included at the end of the PATH. This can have confusing and
even dangerous results.
The fix itself is pretty straight-forward. There's a new
test in t0061 to cover this explicitly, and I've also added
a duplicate of the ENOENT test to ensure that we return the
correct errno for this case.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
after 36da893114 ("config.mak.dev: enable -Wunused-function", 2018-10-18)
it is expected to be used to prevent -Wunused-function warnings for code
that was macro generated
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Anton Serbulov [Tue, 23 Oct 2018 10:52:49 +0000 (03:52 -0700)]
mingw: fix getcwd when the parent directory cannot be queried
`GetLongPathName()` function may fail when it is unable to query
the parent directory of a path component to determine the long name
for that component. It happens, because it uses `FindFirstFile()`
function for each next short part of path. The `FindFirstFile()`
requires `List Directory` and `Synchronize` desired access for a calling
process.
In case of lacking such permission for some part of path,
the `GetLongPathName()` returns 0 as result and `GetLastError()`
returns ERROR_ACCESS_DENIED.
`GetFinalPathNameByHandle()` function can help in such cases, because
it requires `Read Attributes` and `Synchronize` desired access to the
target path only.
The `GetFinalPathNameByHandle()` function was introduced on
`Windows Server 2008/Windows Vista`. So we need to load it dynamically.
`CreateFile()` parameters:
`lpFileName` = path to the current directory
`dwDesiredAccess` = 0 (it means `Read Attributes` and `Synchronize`)
`dwShareMode` = FILE_SHARE_READ | FILE_SHARE_WRITE | FILE_SHARE_DELETE
(it prevents `Sharing Violation`)
`lpSecurityAttributes` = NULL (default security attributes)
`dwCreationDisposition` = OPEN_EXISTING
(required to obtain a directory handle)
`dwFlagsAndAttributes` = FILE_FLAG_BACKUP_SEMANTICS
(required to obtain a directory handle)
`hTemplateFile` = NULL (when opening an existing file or directory,
`CreateFile` ignores this parameter)
The string that is returned by `GetFinalPathNameByHandle()` function
uses the \\?\ syntax. To skip the prefix and convert backslashes
to slashes, the `normalize_ntpath()` mingw function will be used.
Note: `GetFinalPathNameByHandle()` function returns a final path.
It is the path that is returned when a path is fully resolved.
For example, for a symbolic link named "C:\tmp\mydir" that points to
"D:\yourdir", the final path would be "D:\yourdir".
Signed-off-by: Anton Serbulov <aserbulov@plesk.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When switching the current working directory, say, in PowerShell, it is
quite possible to use a different capitalization than the one that is
recorded on disk. While doing the same in `cmd.exe` adjusts the
capitalization magically, that does not happen in PowerShell so that
`getcwd()` returns the current directory in a different way than is
recorded on disk.
Typically this creates no problems except when you call
git log .
in a subdirectory called, say, "GIT/" but you switched to "Git/" and
your `getcwd()` reports the latter, then Git won't understand that you
wanted to see the history as per the `GIT/` subdirectory but it thinks you
wanted to see the history of some directory that may have existed in the
past (but actually never did).
So let's be extra careful to adjust the capitalization of the current
directory before working with it.
Reported by a few PowerShell power users ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we access IPv6-related functions, we load the corresponding system
library using the `LoadLibrary()` function, which is not the recommended
way to load system libraries.
In practice, it does not make a difference: the `ws2_32.dll` library
containing the IPv6 functions is already loaded into memory, so
LoadLibrary() simply reuses the already-loaded library.
Still, recommended way is recommended way, so let's use that instead.
While at it, also adjust the code in contrib/ that loads system libraries.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase --autostash: fix issue with dirty submodules
Since we cannot stash dirty submodules, there is no use in requiring
them to be clean (or stash them when they are not).
This brings the built-in rebase in line with the previous, scripted
version, which also did not care about dirty submodules (but it was
admittedly not very easy to figure that out).
This fixes https://github.com/git-for-windows/git/issues/1820
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 23 Oct 2018 01:32:04 +0000 (18:32 -0700)]
Documentation/config.txt: fix typo in core.alternateRefsCommand
In [1] Git learned about 'core.alternateRefsCommand', and with it, the
accompanying documentation. However, this documentation included a typo
involving the verb tense of "produced".
Match the tense of the surrounding bits by correcting this typo.
Junio C Hamano [Wed, 24 Oct 2018 01:10:10 +0000 (10:10 +0900)]
cocci: simplify "if (++u > 1)" to "if (u++)"
It is more common to use post-increment than pre-increment when the
side effect is the primary thing we want in our code and in C in
general (unlike C++).
Initializing a variable to 0, incrementing it every time we do
something, and checking if we have already done that thing to guard
the code to do that thing, is easier to understand when written
if (u++)
; /* we've done that! */
else
do_it(); /* just once. */
but if you try to use pre-increment, you end up with a less natural
looking
Stephen P. Smith [Tue, 23 Oct 2018 03:53:41 +0000 (20:53 -0700)]
t7501: rename commit test to comply with naming convention
The naming convention was documented [1] but this script was not
renamed.
The original commit message indicates the script tests basic commit
functionality. Clean up the test name by changing the file name to
specify the intent as documented in the initial commit.
[1] f50c9f76c ("Rename some test scripts and describe the naming convention", 2005-05-15)
Signed-off-by: Stephen P. Smith <ischis2@cox.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephen P. Smith [Tue, 23 Oct 2018 03:53:38 +0000 (20:53 -0700)]
t7509: cleanup description and filename
Rename test and update the test description to explicitly state that
included tests all relate to commit authorship. The t7509-commit.sh
file was not renamed when other scripts were updated in compliance
with the test naming convention.
[1] f50c9f76c ("Rename some test scripts and describe the naming convention", 2005-05-15)
Signed-off-by: Stephen P. Smith <ischis2@cox.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase (autostash): use an explicit OID to apply the stash
When `git stash apply <argument>` sees an argument that consists only of
digits, it tries to be smart and interpret it as `stash@{<number>}`.
Unfortunately, an all-digit hash (which is unlikely but still possible)
is therefore misinterpreted as `stash@{<n>}` reflog.
To prevent that from happening, let's append `^0` after the stash hash,
to make sure that it is interpreted as an OID rather than as a number.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase (autostash): store the full OID in <state-dir>/autostash
It was reported by Gábor Szeder and analyzed by Alban Gruin that the
built-in rebase stores only abbreviated stash hashes in the `autostash`
file.
This is problematic e.g. in t5520-pull.sh, where the abbreviated hash is
so short that it sometimes consists only of digits, which are
subsequently mistaken ("DWIMmed") for numbers by `git stash apply`.
Let's align the behavior of the built-in rebase with the scripted rebase
and store the full stash hash instead. That makes it a lot less likely
that it consists only of digits.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase (autostash): avoid duplicate call to state_dir_path()
We already called that function at this point, and stored the result in
the `path` variable. We might just as well use it ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
