Trent Piepho [Thu, 8 May 2008 21:26:55 +0000 (14:26 -0700)]
cvsexportcommit: Create config option for CVS dir
For a given project the directory used with the -w option is almost always
the same each time. Let it be specified with 'cvsexportcommit.cvsdir' so
it's not necessary to manually add it with -w each time.
Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Robin Rosenberg <robin.rosenberg@dewire.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mike Ralphson [Wed, 7 May 2008 08:35:55 +0000 (09:35 +0100)]
Makefile: update the default build options for AIX
NO_MKDTEMP is required to build, FREAD_READS_DIRECTORIES and the definition
of _LARGE_FILES fix test suite failures and INTERNAL_QSORT is required for
adequate performance.
Tested on AIX v5.3 Maintenance Level 06
Signed-off-by: Mike Ralphson <mike@abacus.co.uk> Tested-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Marcel Koeppen [Fri, 16 May 2008 00:21:43 +0000 (02:21 +0200)]
Replace in-place sed in t7502-commit
The in-place mode of sed used in t7502-commit is a non-POSIX extension.
That call of sed is replaced by a more portable version using a temporary file.
Signed-off-by: Marcel Koeppen <git-dev@marzelpan.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Miklos Vajna [Thu, 15 May 2008 22:35:56 +0000 (00:35 +0200)]
git-fast-import: rename cmd_*() functions to parse_*()
There is a cmd_merge() function in fast-import that will conflict with
builtin-merge's cmd_merge() function. To keep it consistent, rename all
cmd_*() function to parse_*()
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 15 May 2008 08:31:15 +0000 (01:31 -0700)]
Merge git://repo.or.cz/git-gui
* git://repo.or.cz/git-gui:
git-gui: Delete branches with 'git branch -D' to clear config
git-gui: Setup branch.remote,merge for shorthand git-pull
git-gui: Update German translation
git-gui: Don't use '$$cr master' with aspell earlier than 0.60
git-gui: Report less precise object estimates for database compression
Junio C Hamano [Thu, 15 May 2008 04:27:55 +0000 (21:27 -0700)]
Merge git://git.kernel.org/pub/scm/gitk/gitk
* git://git.kernel.org/pub/scm/gitk/gitk: (44 commits)
gitk: Add a progress bar for checking out a head
gitk: Show current row number and total number of rows
gitk: Allow users to view diffs in external diff viewer
gitk: Synchronize highlighting in file view for 'f' and 'b' commands
gitk: Make updates go faster
gitk: Disable "Reset %s branch to here" when on a detached head
gitk: German translation again updated
gitk: Update German translation
gitk: Makefile/install: force permissions when installing files and dirs
gitk: Initial Swedish translation.
gitk: Spanish translation of gitk
gitk: Fix handling of tree file list with special chars in names
gitk: Reorganize processing of arguments for git log
gitk: Fix problem with target row not being in scroll region
gitk: Avoid a crash in selectline if commitinfo($id) isn't set
gitk: Fix some corner cases in computing vrowmod and displayorder
gitk: Correct a few strings and comments to say "git log"
gitk: Don't filter view arguments through git rev-parse
gitk: Fix problems with target row stuff
gitk: Handle updating with path limiting better
...
Junio C Hamano [Wed, 14 May 2008 20:45:20 +0000 (13:45 -0700)]
Merge branch 'sb/committer'
* sb/committer:
commit: Show committer if automatic
commit: Show author if different from committer
Preparation to call determine_author_info from prepare_to_commit
Junio C Hamano [Wed, 14 May 2008 20:45:16 +0000 (13:45 -0700)]
Merge branch 'bd/tests'
* bd/tests:
Rename the test trash directory to contain spaces.
Fix tests breaking when checkout path contains shell metacharacters
Don't use the 'export NAME=value' in the test scripts.
lib-git-svn.sh: Fix quoting issues with paths containing shell metacharacters
test-lib.sh: Fix some missing path quoting
Use test_set_editor in t9001-send-email.sh
test-lib.sh: Add a test_set_editor function to safely set $VISUAL
git-send-email.perl: Handle shell metacharacters in $EDITOR properly
config.c: Escape backslashes in section names properly
git-rebase.sh: Fix --merge --abort failures when path contains whitespace
Junio C Hamano [Wed, 14 May 2008 20:34:34 +0000 (13:34 -0700)]
Merge branch 'mv/format-cc'
* mv/format-cc:
Add tests for sendemail.cc configuration variable
git-send-email: add a new sendemail.cc configuration variable
git-format-patch: add a new format.cc configuration variable
Jeff King [Tue, 13 May 2008 08:46:38 +0000 (04:46 -0400)]
filter-branch: fix variable export logic
filter-branch tries to restore "old" copies of some
environment variables by using the construct:
unset var
test -z "$old_var" || var="$old_var" && export var
This is just wrong. AND-list and OR-list operators && and || have equal
precedence and they bind left to right. The second term, var="$old"
assignment always succeeds, so we always end up exporting var.
On bash and dash, exporting an unset variable has no effect. However, on
some shells (such as FreeBSD's /bin/sh), the shell exports the empty
value.
This manifested itself in this case as git-filter-branch setting
GIT_INDEX_FILE to the empty string, which in turn caused its call to
git-read-tree to fail, leaving the working tree pointing at the original
HEAD instead of the rewritten one.
To fix this, we change the short-circuit logic to better match the intent:
test -z "$old_var" || {
var="$old_var" && export var
}
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 13 May 2008 08:45:56 +0000 (04:45 -0400)]
clone: bsd shell portability fix
When using /bin/sh from FreeBSD 6.1, the value of $? is lost
when calling a function inside the 'trap' action. This
resulted in clone erroneously indicating success when it
should have reported failure.
As a workaround, we save the value of $? before calling any
functions.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paul Mackerras [Mon, 12 May 2008 00:18:38 +0000 (10:18 +1000)]
gitk: Add a progress bar for checking out a head
Now that git checkout reports progress when checking out files, we
can use that to provide a progress bar in gitk. We re-use the green
progress bar (formerly used when reading stuff in) for that.
Junio C Hamano [Sun, 11 May 2008 19:09:18 +0000 (12:09 -0700)]
Merge branch 'maint'
* maint:
wt-status.h: declare global variables as extern
builtin-commit.c: add -u as short name for --untracked-files
git-repack: re-enable parsing of -n command line option
Junio C Hamano [Sun, 11 May 2008 19:09:12 +0000 (12:09 -0700)]
Merge branch 'maint-1.5.4' into maint
* maint-1.5.4:
wt-status.h: declare global variables as extern
builtin-commit.c: add -u as short name for --untracked-files
git-repack: re-enable parsing of -n command line option
Junio C Hamano [Sun, 11 May 2008 19:08:20 +0000 (12:08 -0700)]
Merge branch 'lt/core-optim'
* lt/core-optim:
Optimize symlink/directory detection
Avoid some unnecessary lstat() calls
is_racy_timestamp(): do not check timestamp for gitlinks
diff-lib.c: rename check_work_tree_entity()
diff: a submodule not checked out is not modified
Add t7506 to test submodule related functions for git-status
t4027: test diff for submodule with empty directory
Make git-add behave more sensibly in a case-insensitive environment
When adding files to the index, add support for case-independent matches
Make unpack-tree update removed files before any updated files
Make branch merging aware of underlying case-insensitive filsystems
Add 'core.ignorecase' option
Make hash_name_lookup able to do case-independent lookups
Make "index_name_exists()" return the cache_entry it found
Move name hashing functions into a file of its own
Make unpack_trees_options bit flags actual bitfields
Christian Couder [Sun, 11 May 2008 16:28:25 +0000 (18:28 +0200)]
rev-parse --verify: do not output anything on error
Before this patch, when "git rev-parse --verify" was passed at least one
good rev and then anything, it would output something for the good rev
even if it would latter exit on error.
With this patch, we only output something if everything is ok.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Steven Grimm [Sun, 11 May 2008 05:11:18 +0000 (22:11 -0700)]
Add svn-compatible "blame" output format to git-svn
git-svn blame produced output in the format of git blame; in environments
where there are scripts that read the output of svn blame, it's useful
to be able to use them with the output of git-svn. The git-compatible
format is still available using the new "--git-format" option.
This also fixes a bug in the initial git-svn blame implementation; it was
bombing out on uncommitted local changes.
Signed-off-by: Steven Grimm <koreth@midwinter.com> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mergetool: Make ECMerge use the settings as specified by the user in the GUI
When run from the command line, ECMerge does not automatically use the same
settings for a merge / diff that it would use when starting the GUI and loading
files manually. In the first case the built-in factory defaults would be used,
while in the second case the settings the user has specified in the GUI would
be used, which can be misleading. Specifying the "--default" command line
option changes this behavior so that always the user specfified GUI settings
are used.
Signed-off-by: Sebastian Schuberth <sschuberth@visageimaging.com> Tested-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-format-patch: add --no-binary to omit binary changes in the patch.
Add a new option --no-binary to git-format-patch so that no binary
changes are included in the generated patches, only notices that those
files changed. This generate patches that cannot be applied, but still
is useful for generating mails for code review purposes.
git-repack: re-enable parsing of -n command line option
In commit 5715d0b (Migrate git-repack.sh to use git-rev-parse --parseopt,
2007-11-04), parsing of the '-n' command line option was accidentally lost
when git-repack.sh was migrated to use git-rev-parse --parseopt. This adds
it back.
Signed-off-by: A Large Angry SCM <gitzilla@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dustin Sallings [Sat, 10 May 2008 22:36:29 +0000 (15:36 -0700)]
Allow tracking branches to set up rebase by default.
Change cd67e4d4 introduced a new configuration parameter that told
pull to automatically perform a rebase instead of a merge. This
change provides a configuration option to enable this feature
automatically when creating a new branch.
If the variable branch.autosetuprebase applies for a branch that's
being created, that branch will have branch.<name>.rebase set to true.
Signed-off-by: Dustin Sallings <dustin@spy.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Sun, 11 May 2008 00:14:49 +0000 (17:14 -0700)]
git-svn: fix cloning of HTTP URLs with '+' in their path
With this, git svn clone -s http://svn.gnome.org/svn/gtk+
is successful.
Also modified the funky rename test for this, which _does_
include escaped '+' signs for HTTP URLs. SVN seems to accept
either "+" or "%2B" in filenames and directories (just not the
main URL), so I'll leave it alone for now.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paul Mackerras [Sun, 11 May 2008 12:13:02 +0000 (22:13 +1000)]
gitk: Show current row number and total number of rows
This adds a couple of fields in the bar just below the upper panes
that show the row number of the currently selected commit, and how
many rows are displayed in total. The latter increments as commits
are read in, and thus functions to show that progress is being made.
This therefore also removes the code that showed progress using a
green oscillating bar in the progress bar window (which some people
disliked).
Linus Torvalds [Fri, 9 May 2008 16:21:07 +0000 (09:21 -0700)]
Optimize symlink/directory detection
This is the base for making symlink detection in the middle fo a pathname
saner and (much) more efficient.
Under various loads, we want to verify that the full path leading up to a
filename is a real directory tree, and that when we successfully do an
'lstat()' on a filename, we don't get a false positive due to a symlink in
the middle of the path that git should have seen as a symlink, not as a
normal path component.
The 'has_symlink_leading_path()' function already did this, and cached
a single level of symlink information, but didn't cache the _lack_ of a
symlink, so the normal behaviour was actually the wrong way around, and we
ended up doing an 'lstat()' on each path component to check that it was a
real directory.
This caches the last detected full directory and symlink entries, and
speeds up especially deep directory structures a lot by avoiding to
lstat() all the directories leading up to each entry in the index.
[ This can - and should - probably be extended upon so that we eventually
never do a bare 'lstat()' on any path entries at *all* when checking the
index, but always check the full path carefully. Right now we do not
generally check the whole path for all our normal quick index
revalidation.
We should also make sure that we're careful about all the invalidation,
ie when we remove a link and replace it by a directory we should
invalidate the symlink cache if it matches (and vice versa for the
directory cache).
But regardless, the basic function needs to be sane to do that. The old
'has_symlink_leading_path()' was not capable enough - or indeed the code
readable enough - to really do that sanely. So I'm pushing this as not
just an optimization, but as a base for further work. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Fri, 9 May 2008 16:11:43 +0000 (09:11 -0700)]
Avoid some unnecessary lstat() calls
The commit sequence used to do
if (file_exists(p->path))
add_file_to_cache(p->path, 0);
where both "file_exists()" and "add_file_to_cache()" needed to do a
lstat() on the path to do their work.
This cuts down 'lstat()' calls for the partial commit case by two
for each path we know about (because we do this twice per path).
Just move the lstat() to the caller instead (that's all that
"file_exists()" really does), and pass the stat information down to the
add_to_cache() function.
This essentially makes 'add_to_index()' the core function that adds a path
to the index, getting the index pointer, the pathname and the stat
information as arguments. There are then shorthand helper functions that
use this core function:
- 'add_to_cache()' is just 'add_to_index()' with the default index
- 'add_file_to_cache/index()' is the same, but does the lstat() call
itself, so you can pass just the pathname if you don't already have the
stat information available.
So old users of the 'add_file_to_xyzzy()' are essentially left unchanged,
and this just exposes the more generic helper function that can take
existing stat information into account.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 11 May 2008 01:16:25 +0000 (18:16 -0700)]
Merge branch 'py/diff-submodule'
* py/diff-submodule:
is_racy_timestamp(): do not check timestamp for gitlinks
diff-lib.c: rename check_work_tree_entity()
diff: a submodule not checked out is not modified
Add t7506 to test submodule related functions for git-status
t4027: test diff for submodule with empty directory
Junio C Hamano [Sun, 11 May 2008 01:14:28 +0000 (18:14 -0700)]
Merge branch 'lt/case-insensitive'
* lt/case-insensitive:
Make git-add behave more sensibly in a case-insensitive environment
When adding files to the index, add support for case-independent matches
Make unpack-tree update removed files before any updated files
Make branch merging aware of underlying case-insensitive filsystems
Add 'core.ignorecase' option
Make hash_name_lookup able to do case-independent lookups
Make "index_name_exists()" return the cache_entry it found
Move name hashing functions into a file of its own
Make unpack_trees_options bit flags actual bitfields
Thomas Arcila [Mon, 24 Mar 2008 11:55:36 +0000 (12:55 +0100)]
gitk: Allow users to view diffs in external diff viewer
This allows gitk to run an external diff viewer such as meld.
Right-click on a file in the file list view gives "External diff"
popup menu entry, which launches the selected external diff tool.
The menu entry is only active in "Patch" mode, not in "Tree" mode.
The program to run to display the diff is configurable through
Edit/Preference/External diff tool. The program is run with two
arguments, being the names of files containing the two versions to
diff. Gitk will create temporary directories called
.gitk-tmp.<pid>/<n> to place these files in, and remove them when
it's finished.
If the file doesn't exist in one or other revision, gitk will supply
/dev/null as the name of the file on that side of the diff. This may
need to be adjusted for Windows or MacOS.
[paulus@samba.org - cleaned up and rewrote some parts of the patch.]
Signed-off-by: Thomas Arcila <thomas.arcila@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Sat, 10 May 2008 03:15:36 +0000 (13:15 +1000)]
gitk: Synchronize highlighting in file view for 'f' and 'b' commands
This is based on a patch by Eric Raible <raible@gmail.com>, but does
things a bit more simply.
Previously, 'b', backspace, and delete all did the same thing.
This changes 'b' to perform the inverse of 'f'. And both of
them now highlight the filename of the currently diff.
This makes it easier to review and navigate the diffs associated
with a particular commit using only f, b, and space because the
filename of the currently display diff will be dynamically
highlighted.
Junio C Hamano [Fri, 9 May 2008 03:06:11 +0000 (20:06 -0700)]
Merge branch 'cc/help'
* cc/help:
documentation: web--browse: add a note about konqueror
documentation: help: add info about "man.<tool>.cmd" config var
help: use "man.<tool>.cmd" as custom man viewer command
documentation: help: add "man.<tool>.path" config variable
help: use man viewer path from "man.<tool>.path" config var
Brandon Casey [Wed, 7 May 2008 17:34:18 +0000 (12:34 -0500)]
compat/fopen.c: avoid clobbering the system defined fopen macro
Some systems define fopen as a macro based on compiler settings.
The previous technique for reverting to the system fopen function
by merely undefining fopen is inadequate in this case. Instead,
avoid defining fopen entirely when compiling this source file.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Tested-by: Mike Ralphson <mike@abacus.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Fri, 9 May 2008 00:29:42 +0000 (20:29 -0400)]
git-gui: Delete branches with 'git branch -D' to clear config
If we are deleting a local branch from refs/heads/ we need to
make sure any associated configuration stored in .git/config is
also removed (such as branch.$name.remote and branch.$name.merge).
The easiest way to do this is to use git-branch as that automatically
will look for and delete configuration keys as necessary.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Fri, 9 May 2008 00:16:43 +0000 (20:16 -0400)]
git-gui: Setup branch.remote,merge for shorthand git-pull
When creating new branches if branch.autosetupmerge is not set, or
is set to true or always and we have been given a remote tracking
branch as the starting point for a new branch we want to create the
necessary configuration options in .git/config for the new branch
so that a no argument git-pull on the command line pulls from the
remote repository's branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Paul Mackerras [Fri, 9 May 2008 00:14:07 +0000 (10:14 +1000)]
gitk: Make updates go faster
This goes back to the method of doing updates where we translate the
revisions we're given to SHA1 ids and then remove the ones we've asked
for before or that we've already come across. This speeds up updates
enormously in most cases since it means git log doesn't have to traverse
large parts of the tree. We used to do this, but it had bugs, and commit 468bcaedbb1589f16955e63b6bfba01c2f53e433 (gitk: Don't filter view
arguments through git rev-parse) went to the slower method to avoid the
bugs.
In order to do this properly, we have to parse the command line and
understand all the flag arguments. So this adds a parser that checks
all the flag arguments. If there are any we don't know about, we
disable the optimization and just pass the whole lot to git log
(except for -d/--date-order, which we remove from the list).
With this we can then use git rev-parse on the non-flag arguments to
work out exactly what SHA1 ids are included and excluded in the list,
which then enables us to ask for just the new ones when updating.
One wrinkle is that we have to turn symmetric diff arguments (of the
form a...b) back into symmetric diff form so that --left-right still
works, as git rev parse turns a...b into a b ^merge_base(a,b).
Jeff King [Thu, 8 May 2008 17:25:06 +0000 (13:25 -0400)]
doc: clarify definition of "update" for git-add -u
The "-u" option is described only in terms of "updating"
files, which in turn is described only as "similar to what
git commit -a does". Let's be a little more specific about
what updating entails.
Suggested by Geoffrey Irving.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gustaf Hendeby [Thu, 8 May 2008 08:55:02 +0000 (10:55 +0200)]
Documentation/config.txt: Add git-gui options
The 'git gui' has a number of options that can be specified using the
options dialog. Sometimes it is convenient to be able to specify these
from the command line, therefor document these options.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se> Acked-by: Shawn O. Pearce <speace@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: improve "add", "pull" and "format-patch" examples
Before this patch in "git-add.txt" and "git-format-patch.txt", the
commands used in the examples were "git-CMD" instead of "git CMD".
This patch fixes that.
In "git-pull.txt" only the last example had the code sample in an
asciidoc "Listing Block", and in the other two files, none.
This patch fixes that by putting all code samples in listing
blocks.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark Hills [Mon, 5 May 2008 16:46:42 +0000 (17:46 +0100)]
Be more careful with objects directory permissions on clone
Honour the setgid and umask when re-creating the objects directory
at the destination.
cpio in copy-pass mode aims to copy file permissions which causes this
problem and cannot be disabled. Be explicit by copying the directory
structure first, honouring the permissions at the destination, then copy
the files with 0444 permissions. This also avoids bugs in some versions
of cpio.
Signed-off-by: Mark Hills <mark@pogo.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 6 May 2008 02:16:26 +0000 (19:16 -0700)]
Merge branch 'jc/lstat'
* jc/lstat:
diff-files: mark an index entry we know is up-to-date as such
write_index(): optimize ce_smudge_racily_clean_entry() calls with CE_UPTODATE
Junio C Hamano [Tue, 6 May 2008 02:16:16 +0000 (19:16 -0700)]
Merge branch 'lh/git-file'
* lh/git-file:
Teach GIT-VERSION-GEN about the .git file
Teach git-submodule.sh about the .git file
Teach resolve_gitlink_ref() about the .git file
Add platform-independent .git "symlink"
Junio C Hamano [Tue, 6 May 2008 02:16:06 +0000 (19:16 -0700)]
Merge branch 'lh/branch-merged'
* lh/branch-merged:
Add tests for `branch --[no-]merged`
git-branch.txt: compare --contains, --merged and --no-merged
git-branch: add support for --merged and --no-merged
If a branch named "bisect" or "new-bisect" already was created in the
repo by other means than git bisect, doing a git bisect used to override
the branch without a warning. Now if the branch "bisect" or
"new-bisect" already exists, and it was not created by git bisect itself,
git bisect start fails with an appropriate error message. Additionally,
if checking out a new bisect state fails due to a merge problem, git
bisect cleans up the temporary branch "new-bisect".
The accidental override has been noticed by Andres Salomon, reported
through
http://bugs.debian.org/478647
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gustaf Hendeby [Sun, 4 May 2008 22:33:09 +0000 (00:33 +0200)]
git-svn: Make create-ignore use git add -f
When having a svn:ignore that ignores the .gitignore file the -f
option to git add must be used to avoid git complaining about adding
an ignored file and hence stop the process of creating .gitignores.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bryan Donlan [Sun, 4 May 2008 05:38:00 +0000 (01:38 -0400)]
Rename the test trash directory to contain spaces.
In order to help prevent regressions in the future, rename the trash directory
for all tests to contain spaces. This patch also corrects two failures that
were caused or exposed by this change.
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bryan Donlan [Sun, 4 May 2008 05:37:59 +0000 (01:37 -0400)]
Fix tests breaking when checkout path contains shell metacharacters
This fixes the remainder of the issues where the test script itself is at
fault for failing when the git checkout path contains whitespace or other
shell metacharacters.
The majority of git svn tests used the idiom
test_expect_success "title" "test script using $svnrepo"
These were changed to have the test script in single-quotes:
test_expect_success "title" 'test script using "$svnrepo"'
which unfortunately makes the patch appear larger than it really is.
One consequence of this change is that in the verbose test output the
value of $svnrepo (and in some cases other variables, too) is no
longer expanded, i.e. previously we saw
* expecting success:
test script using /path/to/git/t/trash/svnrepo
but now it is:
* expecting success:
test script using "$svnrepo"
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bryan Donlan [Sun, 4 May 2008 05:37:53 +0000 (01:37 -0400)]
git-send-email.perl: Handle shell metacharacters in $EDITOR properly
This fixes the git-send-perl semantics for launching an editor when
$GIT_EDITOR (or friends) contains shell metacharacters to match
launch_editor() in builtin-tag.c. If we use the current approach
(sh -c '$0 $@' "$EDITOR" files ...), we see it fails when $EDITOR has
shell metacharacters:
$ sh -x -c '$0 $@' "$VISUAL" "foo"
+ "$FAKE_EDITOR" foo
"$FAKE_EDITOR": 1: "$FAKE_EDITOR": not found
Whereas builtin-tag.c will invoke sh -c "$EDITOR \"$@\"".
Thus, this patch changes git-send-email.perl to use the same method as the
C utilities, and additionally updates t/t9001-send-email.sh to test for
this bug.
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bryan Donlan [Sun, 4 May 2008 05:37:52 +0000 (01:37 -0400)]
config.c: Escape backslashes in section names properly
If an element of the configuration key name other than the first or last
contains a backslash, it is not escaped on output, but is treated as an
escape sequence on input. Thus, the backslash is lost when re-loading
the configuration.
This patch corrects this by having backslashes escaped properly, and
introduces a new test for this bug.
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
