Junio C Hamano [Fri, 14 Feb 2020 20:54:20 +0000 (12:54 -0800)]
Merge branch 'mt/threaded-grep-in-object-store'
Traditionally, we avoided threaded grep while searching in objects
(as opposed to files in the working tree) as accesses to the object
layer is not thread-safe. This limitation is getting lifted.
* mt/threaded-grep-in-object-store:
grep: use no. of cores as the default no. of threads
grep: move driver pre-load out of critical section
grep: re-enable threads in non-worktree case
grep: protect packed_git [re-]initialization
grep: allow submodule functions to run in parallel
submodule-config: add skip_if_read option to repo_read_gitmodules()
grep: replace grep_read_mutex by internal obj read lock
object-store: allow threaded access to object reading
replace-object: make replace operations thread-safe
grep: fix racy calls in grep_objects()
grep: fix race conditions at grep_submodule()
grep: fix race conditions on userdiff calls
Junio C Hamano [Fri, 14 Feb 2020 20:54:19 +0000 (12:54 -0800)]
Merge branch 'jn/promote-proto2-to-default'
The transport protocol version 2 becomes the default one.
* jn/promote-proto2-to-default:
fetch: default to protocol version 2
protocol test: let protocol.version override GIT_TEST_PROTOCOL_VERSION
test: request GIT_TEST_PROTOCOL_VERSION=0 when appropriate
config doc: protocol.version is not experimental
fetch test: use more robust test for filtered objects
Junio C Hamano [Wed, 12 Feb 2020 20:41:36 +0000 (12:41 -0800)]
Merge branch 'pb/do-not-recurse-grep-no-index'
"git grep --no-index" should not get affected by the contents of
the .gitmodules file but when "--recurse-submodules" is given or
the "submodule.recurse" variable is set, it did. Now these
settings are ignored in the "--no-index" mode.
* pb/do-not-recurse-grep-no-index:
grep: ignore --recurse-submodules if --no-index is given
Junio C Hamano [Wed, 12 Feb 2020 20:41:36 +0000 (12:41 -0800)]
Merge branch 'hw/doc-git-dir'
One effect of specifying where the GIT_DIR is (either with the
environment variable, or with the "git --git-dir=<where> cmd"
option) is to disable the repository discovery. This has been
placed a bit more stress in the documentation, as new users often
get confused.
* hw/doc-git-dir:
git: update documentation for --git-dir
Junio C Hamano [Wed, 12 Feb 2020 20:41:35 +0000 (12:41 -0800)]
Merge branch 'jk/escaped-wildcard-dwim'
Disambiguation logic to tell revisions and pathspec apart has been
tweaked so that backslash-escaped glob special characters do not
count in the "wildcards are pathspec" rule.
* jk/escaped-wildcard-dwim:
verify_filename(): handle backslashes in "wildcards are pathspecs" rule
ci: ignore rubygems warning in the "Documentation" job
A recent update in the Linux VM images used by Azure Pipelines surfaced
a new problem in the "Documentation" job. Apparently, this warning
appears 396 times on `stderr` when running `make doc`:
/usr/lib/ruby/vendor_ruby/rubygems/defaults/operating_system.rb:10: warning: constant Gem::ConfigMap is deprecated
This problem was already reported to the `rubygems` project via
https://github.com/rubygems/rubygems/issues/3068.
As there is nothing Git can do about this warning, and as the
"Documentation" job reports this warning as a failure, let's just
silence it and move on.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Berg [Fri, 7 Feb 2020 22:16:40 +0000 (23:16 +0100)]
pack-format: correct multi-pack-index description
The description of the multi-pack-index contains a small bug,
if all offsets are < 2^32 then there will be no LOFF chunk,
not only if they're all < 2^31 (since the highest bit is only
needed as the "LOFF-escape" when that's actually needed.)
Correct this, and clarify that in that case only offsets up
to 2^31-1 can be stored in the OOFF chunk.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Thu, 6 Feb 2020 20:53:01 +0000 (21:53 +0100)]
diff-options.txt: avoid "regex" overload in example
When we exemplify the difference between `-G` and `-S` (using
`--pickaxe-regex`), we do so using an example diff and git-diff
invocation involving "regexec", "regexp", "regmatch", ...
The example is correct, but we can make it easier to untangle by
avoiding writing "regex.*" unless it's really needed to make our point.
Use some made-up, non-regexy words instead.
Reported-by: Adam Dinwoodie <adam@dinwoodie.org> Signed-off-by: Martin Ågren <martin.agren@gmail.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Emily Shaffer [Fri, 7 Feb 2020 00:48:33 +0000 (16:48 -0800)]
submodule: add newline on invalid submodule error
Since 'err' contains output for multiple submodules and is printed all
at once by fetch_populated_submodules(), errors for each submodule
should be newline separated for readability. The same strbuf is added to
with a newline in the other half of the conditional where this error is
detected, so make the two consistent.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Heba Waly [Thu, 6 Feb 2020 10:57:30 +0000 (23:57 +1300)]
add: change advice config variables used by the add API
advice.addNothing config variable is used to control the visibility of
two advice messages in the add library. This config variable is
replaced by two new variables, whose names are more clear and relevant
to the two cases.
Also add the two new variables to the documentation.
Signed-off-by: Heba Waly <heba.waly@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--recurse-submodules" option of various subcommands did not
work well when run in an alternate worktree, which has been
corrected.
* pb/recurse-submodule-in-worktree-fix:
submodule.c: use get_git_dir() instead of get_git_common_dir()
t2405: clarify test descriptions and simplify test
t2405: use git -C and test_commit -C instead of subshells
t7410: rename to t2405-worktree-submodule.sh
A fetch that is told to recursively fetch updates in submodules
inevitably produces reams of output, and it becomes hard to spot
error messages. The command has been taught to enumerate
submodules that had errors at the end of the operation.
* es/fetch-show-failed-submodules-atend:
fetch: emphasize failure during submodule fetch
Junio C Hamano [Wed, 5 Feb 2020 22:34:59 +0000 (14:34 -0800)]
Merge branch 'en/fill-directory-fixes-more'
Corner case bugs in "git clean" that stems from a (necessarily for
performance reasons) awkward calling convention in the directory
enumeration API has been corrected.
* en/fill-directory-fixes-more:
dir: point treat_leading_path() warning to the right place
dir: restructure in a way to avoid passing around a struct dirent
dir: treat_leading_path() and read_directory_recursive(), round 2
clean: demonstrate a bug with pathspecs
Junio C Hamano [Wed, 5 Feb 2020 22:34:59 +0000 (14:34 -0800)]
Merge branch 'bc/hash-independent-tests-part-7'
Preparation of test scripts for the day when the object names will
use SHA-256 continues.
* bc/hash-independent-tests-part-7:
t5604: make hash independent
t5601: switch into repository to hash object
t5562: use $ZERO_OID
t5540: make hash size independent
t5537: make hash size independent
t5530: compute results based on object length
t5512: abstract away SHA-1-specific constants
t5510: make hash size independent
t5504: make hash algorithm independent
t5324: make hash size independent
t5319: make test work with SHA-256
t5319: change invalid offset for SHA-256 compatibility
t5318: update for SHA-256
t4300: abstract away SHA-1-specific constants
t4204: make hash size independent
t4202: abstract away SHA-1-specific constants
t4200: make hash size independent
t4134: compute appropriate length constant
t4066: compute index line in diffs
t4054: make hash-size independent
"git checkout X" did not correctly fail when X is not a local
branch but could name more than one remote-tracking branches
(i.e. to be dwimmed as the starting point to create a corresponding
local branch), which has been corrected.
* am/checkout-file-and-ref-ref-ambiguity:
checkout: don't revert file on ambiguous tracking branches
parse_branchname_arg(): extract part as new function
Junio C Hamano [Wed, 5 Feb 2020 22:34:58 +0000 (14:34 -0800)]
Merge branch 'js/add-p-leftover-bits'
The final leg of rewriting "add -i/-p" in C.
* js/add-p-leftover-bits:
ci: include the built-in `git add -i` in the `linux-gcc` job
built-in add -p: handle Escape sequences more efficiently
built-in add -p: handle Escape sequences in interactive.singlekey mode
built-in add -p: respect the `interactive.singlekey` config setting
terminal: add a new function to read a single keystroke
terminal: accommodate Git for Windows' default terminal
terminal: make the code of disable_echo() reusable
built-in add -p: handle diff.algorithm
built-in add -p: support interactive.diffFilter
t3701: adjust difffilter test
Junio C Hamano [Wed, 5 Feb 2020 22:34:58 +0000 (14:34 -0800)]
Merge branch 'js/patch-mode-in-others-in-c'
The effort to move "git-add--interactive" to C continues.
* js/patch-mode-in-others-in-c:
commit --interactive: make it work with the built-in `add -i`
built-in add -p: implement the "worktree" patch modes
built-in add -p: implement the "checkout" patch modes
built-in stash: use the built-in `git add -p` if so configured
legacy stash -p: respect the add.interactive.usebuiltin setting
built-in add -p: implement the "stash" and "reset" patch modes
built-in add -p: prepare for patch modes other than "stage"
Junio C Hamano [Wed, 5 Feb 2020 22:34:57 +0000 (14:34 -0800)]
Merge branch 'dl/test-must-fail-fixes'
Test clean-up.
* dl/test-must-fail-fixes:
t1507: inline full_name()
t1507: run commands within test_expect_success
t1507: stop losing return codes of git commands
t1501: remove use of `test_might_fail cp`
t1409: use test_path_is_missing()
t1409: let sed open its own input file
t1307: reorder `nongit test_must_fail`
t1306: convert `test_might_fail rm` to `rm -f`
t0020: use ! check_packed_refs_marked
t0020: don't use `test_must_fail has_cr`
t0003: don't use `test_must_fail attr_check`
t0003: use test_must_be_empty()
t0003: use named parameters in attr_check()
t0000: replace test_must_fail with run_sub_test_lib_test_err()
t/lib-git-p4: use test_path_is_missing()
Martin Ågren [Mon, 3 Feb 2020 20:36:50 +0000 (21:36 +0100)]
git-filter-branch.txt: wrap "maths" notation in backticks
In this paragraph, we have a few instances of the '^' character, which
we give as "\^". This renders well with AsciiDoc ("^"), but Asciidoctor
renders it literally as "\^". Dropping the backslashes renders fine
with Asciidoctor, but not AsciiDoc...
An earlier version of this patch used "{caret}" instead of "^", which
avoided these escaping problems. The rendering was still so-so, though
-- these expressions end up set as normal text, similarly to when one
provides, e.g., computer code in the middle of running text, without
properly marking it with `backticks` to be monospaced.
As noted by Jeff King, this suggests actually wrapping these
expressions in backticks, setting them in monospace.
The lone "5" could be left as is or wrapped as `5`. Spell it out as
"five" instead -- this generally looks better anyway for small numbers
in the middle of text like this.
Suggested-by: Jeff King <peff@peff.net> Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 30 Jan 2020 19:35:46 +0000 (11:35 -0800)]
C: use skip_prefix() to avoid hardcoded string length
We often skip an optional prefix in a string with a hardcoded
constant, e.g.
if (starts_with(string, "prefix"))
string += 6;
which is less error prone when written
skip_prefix(string, "prefix", &string);
Note that this changes a few error messages from "git reflog expire
--expire=nonsense.timestamp", which used to complain by saying
'--expire=nonsense.timestamp' is not a valid timestamp
but with this change, we say
'nonsense.timestamp' is not a valid timestamp
which is more technically correct (the string with --expire= as
a prefix obviously cannot be a valid timestamp, but the error is
about the part of the input without that prefix).
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kyle Meyer [Fri, 31 Jan 2020 17:08:43 +0000 (12:08 -0500)]
submodule foreach: replace $path with $sm_path in example
f0fd0dc5c5 (submodule foreach: document '$sm_path' instead of '$path',
2018-05-08) updated the documentation to advise callers to favor
$sm_path over the deprecated synonym $path. However, the example in
that section still uses $path. Update it to use $sm_path.
Signed-off-by: Kyle Meyer <kyle@kyleam.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 30 Jan 2020 22:17:11 +0000 (14:17 -0800)]
Merge branch 'bc/author-committer-doc'
Clarify documentation on committer/author identities.
* bc/author-committer-doc:
doc: provide guidance on user.name format
docs: expand on possible and recommended user config options
doc: move author and committer information to git-commit(1)
Junio C Hamano [Thu, 30 Jan 2020 22:17:09 +0000 (14:17 -0800)]
Merge branch 'sg/completion-worktree'
The command line completion (in contrib/) learned to complete
subcommands and arguments to "git worktree".
* sg/completion-worktree:
completion: list paths and refs for 'git worktree add'
completion: list existing working trees for 'git worktree' subcommands
completion: simplify completing 'git worktree' subcommands and options
completion: return the index of found word from __git_find_on_cmdline()
completion: clean up the __git_find_on_cmdline() helper function
t9902-completion: add tests for the __git_find_on_cmdline() helper
The test-lint machinery knew to check "VAR=VAL shell_function"
construct, but did not check "VAR= shell_funciton", which has been
corrected.
* jn/test-lint-one-shot-export-to-shell-function:
fetch test: mark test of "skipping" haves as v0-only
t/check-non-portable-shell: detect "FOO= shell_func", too
fetch test: avoid use of "VAR= cmd" with a shell function
Junio C Hamano [Thu, 30 Jan 2020 22:17:08 +0000 (14:17 -0800)]
Merge branch 'ds/graph-horizontal-edges'
Rendering by "git log --graph" of ancestry lines leading to a merge
commit were made suboptimal to waste vertical space a bit with a
recent update, which has been corrected.
* ds/graph-horizontal-edges:
graph: fix collapse of multiple edges
graph: add test to demonstrate horizontal line bug
Junio C Hamano [Thu, 30 Jan 2020 22:17:08 +0000 (14:17 -0800)]
Merge branch 'ds/sparse-cone'
The code recently added in this release to move to the entry beyond
the ones in the same directory in the index in the sparse-cone mode
did not count the number of entries to skip over incorrectly, which
has been corrected.
Heba Waly [Thu, 30 Jan 2020 01:14:01 +0000 (01:14 +0000)]
git: update documentation for --git-dir
git --git-dir <path> is a bit confusing and sometimes doesn't work as
the user would expect it to.
For example, if the user runs `git --git-dir=<path> status`, git
will skip the repository discovery algorithm and will assign the
work tree to the user's current work directory unless otherwise
specified. When this assignment is wrong, the output will not match
the user's expectations.
This patch updates the documentation to make it clearer.
Signed-off-by: Heba Waly <heba.waly@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Tue, 14 Jan 2020 03:23:58 +0000 (22:23 -0500)]
.mailmap: map Yi-Jyun Pan's email
In 13185fd241 (l10n: zh_TW.po: update translation for v2.25.0 round 1,
2019-12-31), the author mistakenly used their GitHub username for
authorship information instead of their real name. However, a commit
with their real name exists prior to this: 9917eca794 (l10n: zh_TW: add
translation for v2.24.0, 2019-11-20).
Map their email to their real name so that these contributions can be
counted together.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Thu, 30 Jan 2020 13:37:28 +0000 (13:37 +0000)]
grep: ignore --recurse-submodules if --no-index is given
Since grep learned to recurse into submodules in 0281e487fd
(grep: optionally recurse into submodules, 2016-12-16),
using --recurse-submodules along with --no-index makes Git
die().
This is unfortunate because if submodule.recurse is set in a user's
~/.gitconfig, invoking `git grep --no-index` either inside or outside
a Git repository results in
fatal: option not supported with --recurse-submodules
Let's allow using these options together, so that setting submodule.recurse
globally does not prevent using `git grep --no-index`.
Using `--recurse-submodules` should not have any effect if `--no-index`
is used inside a repository, as Git will recurse into the checked out
submodule directories just like into regular directories.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 29 Jan 2020 05:53:55 +0000 (00:53 -0500)]
doc: drop "explicitly given" from push.default description
The documentation for push.default mentions that it is used if no
refspec is "explicitly given". Let's drop the notion of "explicit" here,
since it's vague, and just mention that any refspec from anywhere is
sufficient to override this.
I've dropped the mention of "explicitly given" from the definition of
the "nothing" value right below, too. It's close enough to our
clarification that it should be obvious we mean the same type of "given"
here.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sat, 25 Jan 2020 05:44:29 +0000 (00:44 -0500)]
obstack: avoid computing offsets from NULL pointer
As with the previous two commits, UBSan with clang-11 complains about
computing offsets from a NULL pointer. The failures in t4013 (and
elsewhere) look like this:
kwset.c:102:23: runtime error: applying non-zero offset 107820859019600 to null pointer
...
not ok 79 - git log -SF master # magic is (not used)
because obstack is implemented almost entirely in macros, and the actual
problem is five macros deep (I temporarily converted them to inline
functions to get better compiler errors, which was tedious but worked
reasonably well).
The actual problem is in these pointer-alignment macros:
/* If B is the base of an object addressed by P, return the result of
aligning P to the next multiple of A + 1. B and P must be of type
char *. A + 1 must be a power of 2. */
/* Similar to _BPTR_ALIGN (B, P, A), except optimize the common case
where pointers can be converted to integers, aligned as integers,
and converted back again. If PTR_INT_TYPE is narrower than a
pointer (e.g., the AS/400), play it safe and compute the alignment
relative to B. Otherwise, use the faster strategy of computing the
alignment relative to 0. */
If we have a sufficiently-large integer pointer type, then we do the
computation using a NULL pointer constant. That turns __BPTR_ALIGN()
into something like:
NULL + (P - NULL + A) & ~A
and UBSan is complaining about adding the full value of P to that
initial NULL. We can fix this by doing our math as an integer type, and
then casting the result back to a pointer. The problem case only happens
when we know that the integer type is large enough, so there should be
no issue with truncation.
Another option would be just simplify out all the 0's from
__BPTR_ALIGN() for the NULL-pointer case. That probably wouldn't work
for a platform where the NULL pointer isn't all-zeroes, but Git already
wouldn't work on such a platform (due to our use of memset to set
pointers in structs to NULL). But I tried here to keep as close to the
original as possible.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sat, 25 Jan 2020 05:39:29 +0000 (00:39 -0500)]
xdiff: avoid computing non-zero offset from NULL pointer
As with the previous commit, clang-11's UBSan complains about computing
offsets from a NULL pointer, causing some tests to fail. In this case,
though, we're actually computing a non-zero offset, which is even more
dubious. From t7810:
xdiff-interface.c:268:14: runtime error: applying non-zero offset 1 to null pointer
...
not ok 131 - grep -p with userdiff
The problem is our parsing of the funcname config. We count the number
of lines in the string, allocate an array, and then loop over our
allocated entries, parsing each line and moving our cursor to one past
the trailing newline for the next iteration.
But the final line will not generally have a trailing newline (since
it's a config value), and hence we go to one past NULL. In practice this
is OK, since our loop should terminate before we look at the value. But
even computing such an invalid pointer technically violates the
standard.
We can fix it by leaving the pointer at NULL if we're at the end, rather
than one-past. And while we're thinking about it, we can also document
the variant by asserting that our initial line-count matches the
second-pass of parsing.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 29 Jan 2020 05:46:47 +0000 (00:46 -0500)]
avoid computing zero offsets from NULL pointer
The Undefined Behavior Sanitizer in clang-11 seems to have learned a new
trick: it complains about computing offsets from a NULL pointer, even if
that offset is 0. This causes numerous test failures. For example, from
t1090:
unpack-trees.c:1355:41: runtime error: applying zero offset to null pointer
...
not ok 6 - in partial clone, sparse checkout only fetches needed blobs
and we sometimes pass in a NULL and 0 for "cache" and "nr". This is
conceptually fine, as "cache_end" would be equal to "cache" in this
case, and we wouldn't enter the loop at all. But computing even a zero
offset violates the C standard. And given the fact that UBSan is
noticing this behavior, this might be a potential problem spot if the
compiler starts making unexpected assumptions based on undefined
behavior.
So let's just avoid it, which is pretty easy. In some cases we can just
switch to iterating with a numeric index (as we do in sequencer.c here).
In other cases (like the cache_end one) the use of an end pointer is
more natural; we can keep that by just explicitly checking for the
NULL/0 case when assigning the end pointer.
Note that there are two ways you can write this latter case, checking
for the pointer:
cache_end = cache ? cache + nr : cache;
or the size:
cache_end = nr ? cache + nr : cache;
For the case of a NULL/0 ptr/len combo, they are equivalent. But writing
it the second way (as this patch does) has the property that if somebody
were to incorrectly pass a NULL pointer with a non-zero length, we'd
continue to notice and segfault, rather than silently pretending the
length was zero.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Turner [Mon, 27 Jan 2020 18:58:56 +0000 (13:58 -0500)]
git rm submodule: succeed if .gitmodules index stat info is zero
The bug was that ie_match_stat() was used to compare if the stat info
for the file was compatible with the stat info in the index, rather
using ie_modified() to check if the file was in fact different from the
version in the index.
A version of this (with deinit instead of rm) was reported here:
https://lore.kernel.org/git/CAPOqYV+C-P9M2zcUBBkD2LALPm4K3sxSut+BjAkZ9T1AKLEr+A@mail.gmail.com/
It seems that in that case, the user's clone command left the index
with empty stat info. The mailing list was unable to reproduce this.
But we (Two Sigma) hit the bug while using some plumbing commands, so
I'm fixing it. I manually confirmed that the fix also repairs deinit
in this scenario.
Signed-off-by: David Turner <dturner@twosigma.com> Reported-by: Thomas Bétous <th.betous@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Mon, 13 Jan 2020 20:28:23 +0000 (12:28 -0800)]
t5616: make robust to delta base change
Commit 6462d5eb9a ("fetch: remove fetch_if_missing=0", 2019-11-08)
contains a test that relies on having to lazily fetch the delta base of
a blob, but assumes that the tree being fetched (as part of the test) is
sent as a non-delta object. This assumption may not hold in the future;
for example, a change in the length of the object hash might result in
the tree being sent as a delta instead.
Make the test more robust by relying on having to lazily fetch the delta
base of the tree instead, and by making no assumptions on whether the
blobs are sent as delta or non-delta.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 25 Jan 2020 23:57:45 +0000 (18:57 -0500)]
merge-recursive: use subtraction to flip stage
The flip_stage() helper uses a bit-flipping xor to switch between "2"
and "3". While clever, this relies on a property of those two numbers
that is mostly coincidence. Let's write it as a subtraction; that's more
clear and would extend to other numbers if somebody copies the logic.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The xor has the effect of flipping the "1" bit, so that "2 ^ 1" becomes
"3" and "3 ^ 1" becomes "2", which correspond to the "ours" and "theirs"
stages respectively.
Unfortunately, clang-10 and up issue a warning for this code:
merge-recursive.c:1759:40: error: result of '2 ^ 1' is 3; did you mean '1 << 1' (2)? [-Werror,-Wxor-used-as-pow]
add = &ci->ren1->dst_entry->stages[2 ^ 1];
~~^~~
1 << 1
merge-recursive.c:1759:40: note: replace expression with '0x2 ^ 1' to silence this warning
We could silence it by using 0x2, as the compiler mentions. Or by just
using the constants "2" and "3" directly. But after digging into it, I
do think this bit-flip is telling us something. If we just wrote:
add = &ci->ren2->dst_entry->stages[2];
for the second one, you might think that "ren2" and "2" correspond. But
they don't. The logic is: ren2 is theirs, which is stage 3, but we
are interested in the opposite side's stage, so flip it to 2.
So let's keep the bit-flipping, but let's also put it behind a named
function, which will make its purpose a bit clearer. This also has the
side effect of suppressing the warning (and an optimizing compiler
should be able to easily turn it into a constant as before).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sat, 25 Jan 2020 00:00:51 +0000 (19:00 -0500)]
verify_filename(): handle backslashes in "wildcards are pathspecs" rule
Commit 28fcc0b71a (pathspec: avoid the need of "--" when wildcard is
used, 2015-05-02) allowed:
git rev-parse '*.c'
without the double-dash. But the rule it uses to check for wildcards
actually looks for any glob special. This is overly liberal, as it means
that a pattern that doesn't actually do any wildcard matching, like
"a\b", will be considered a pathspec.
If you do have such a file on disk, that's presumably what you wanted.
But if you don't, the results are confusing: rather than say "there's no
such path a\b", we'll quietly accept it as a pathspec which very likely
matches nothing (or at least not what you intended). Likewise, looking
for path "a\*b" doesn't expand the search at all; it would only find a
single entry, "a*b".
This commit switches the rule to trigger only when glob metacharacters
would expand the search, meaning both of those cases will now report an
error (you can still disambiguate using "--", of course; we're just
tightening the DWIM heuristic).
Note that we didn't test the original feature in 28fcc0b71a at all. So
this patch not only tests for these corner cases, but also adds a
regression test for the existing behavior.
Reported-by: David Burström <davidburstrom@spotify.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Tue, 14 Jan 2020 02:49:38 +0000 (21:49 -0500)]
.mailmap: fix erroneous authorship for Johannes Schindelin
In 49e268e23e (mingw: safeguard better against backslashes in file
names, 2020-01-09), the commit author is listed as
"Johannes Schindelin via GitGitGadget <gitgitgadget@gmail.com>", which
is erroneous. Fix the authorship by mapping the erroneous authorship to
his canonical authorship information.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 18 Dec 2019 11:25:46 +0000 (12:25 +0100)]
pack-objects: add checks for duplicate objects
Additional checks are added in have_duplicate_entry() and
obj_is_packed() to avoid duplicate objects in the reuse
bitmap. It was probably buggy to not have such a check
before.
Git as a client would never both asks for a tag by sha1 and
specify "include-tag", but libgit2 will, so a libgit2 client
cloning from a Git server would trigger the bug.
If a client both asks for a tag by sha1 and specifies
"include-tag", we may end up including the tag in the reuse
bitmap (due to the first thing), and then later adding it to
the packlist (due to the second). This results in duplicate
objects in the pack, which git chokes on. We should notice
that we are already including it when doing the include-tag
portion, and avoid adding it to the packlist.
The simplest place to fix this is right in add_ref_tag(),
where we could avoid peeling the tag at all if we know that
we are already including it. However, this pushes the check
instead into have_duplicate_entry(). This fixes not only
this case, but also means that we cannot have any similar
problems lurking in other code.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 18 Dec 2019 11:25:45 +0000 (12:25 +0100)]
pack-objects: improve partial packfile reuse
The old code to reuse deltas from an existing packfile
just tried to dump a whole segment of the pack verbatim.
That's faster than the traditional way of actually adding
objects to the packing list, but it didn't kick in very
often. This new code is really going for a middle ground:
do _some_ per-object work, but way less than we'd
traditionally do.
The general strategy of the new code is to make a bitmap
of objects from the packfile we'll include, and then
iterate over it, writing out each object exactly as it is
in our on-disk pack, but _not_ adding it to our packlist
(which costs memory, and increases the search space for
deltas).
One complication is that if we're omitting some objects,
we can't set a delta against a base that we're not
sending. So we have to check each object in
try_partial_reuse() to make sure we have its delta.
About performance, in the worst case we might have
interleaved objects that we are sending or not sending,
and we'd have as many chunks as objects. But in practice
we send big chunks.
For instance, packing torvalds/linux on GitHub servers
now reused 6.5M objects, but only needed ~50k chunks.
Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 18 Dec 2019 11:25:44 +0000 (12:25 +0100)]
builtin/pack-objects: introduce obj_is_packed()
Let's refactor the way we check if an object is packed by
introducing obj_is_packed(). This function is now a simple
wrapper around packlist_find(), but it will evolve in a
following commit.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 18 Dec 2019 11:25:43 +0000 (12:25 +0100)]
pack-objects: introduce pack.allowPackReuse
Let's make it possible to configure if we want pack reuse or not.
The main reason it might not be wanted is probably debugging and
performance testing, though pack reuse _might_ cause larger packs,
because we wouldn't consider the reused objects as bases for
finding new deltas.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 18 Dec 2019 11:25:40 +0000 (12:25 +0100)]
pack-bitmap: uninteresting oid can be outside bitmapped packfile
bitmap_has_oid_in_uninteresting() only used bitmap_position_packfile(),
not bitmap_position(). So it wouldn't find objects which weren't in the
bitmapped packfile (i.e., ones where we extended the bitmap to handle
loose objects, or objects in other packs).
As we could reuse a delta against such an object it is suboptimal not
to use bitmap_position(), so let's use it instead of
bitmap_position_packfile().
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 18 Dec 2019 11:25:38 +0000 (12:25 +0100)]
ewah/bitmap: introduce bitmap_word_alloc()
In a following commit we will need to allocate a variable
number of bitmap words, instead of always 32, so let's add
bitmap_word_alloc() for this purpose.
Note that we have to adjust the block growth in bitmap_set(),
since a caller could now use an initial size of "0" (we don't
plan to do that, but it doesn't hurt to be defensive).
Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 22 Jan 2020 23:07:31 +0000 (15:07 -0800)]
Merge branch 'es/unpack-trees-oob-fix'
The code that tries to skip over the entries for the paths in a
single directory using the cache-tree was not careful enough
against corrupt index file.
* es/unpack-trees-oob-fix:
unpack-trees: watch for out-of-range index position
projects / thirdparty / git.git / log
