Junio C Hamano [Mon, 8 Feb 2021 22:05:55 +0000 (14:05 -0800)]
Merge branch 'ab/branch-sort' into maint
The implementation of "git branch --sort" wrt the detached HEAD
display has always been hacky, which has been cleaned up.
* ab/branch-sort:
branch: show "HEAD detached" first under reverse sort
branch: sort detached HEAD based on a flag
ref-filter: move ref_sorting flags to a bitfield
ref-filter: move "cmp_fn" assignment into "else if" arm
ref-filter: add braces to if/else if/else chain
branch tests: add to --sort tests
branch: change "--local" to "--list" in comment
Junio C Hamano [Mon, 8 Feb 2021 22:05:54 +0000 (14:05 -0800)]
Merge branch 'ma/more-opaque-lock-file' into maint
Code clean-up.
* ma/more-opaque-lock-file:
read-cache: try not to peek into `struct {lock_,temp}file`
refs/files-backend: don't peek into `struct lock_file`
midx: don't peek into `struct lock_file`
commit-graph: don't peek into `struct lock_file`
builtin/gc: don't peek into `struct lock_file`
Junio C Hamano [Mon, 8 Feb 2021 22:05:53 +0000 (14:05 -0800)]
Merge branch 'ma/t1300-cleanup' into maint
Code clean-up.
* ma/t1300-cleanup:
t1300: don't needlessly work with `core.foo` configs
t1300: remove duplicate test for `--file no-such-file`
t1300: remove duplicate test for `--file ../foo`
range-diff(docs): explain how to specify commit ranges
There are three forms, depending whether the user specifies one, two or
three non-option arguments. We've never actually explained how this
works in the manual, so let's explain it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
range-diff/format-patch: handle commit ranges other than A..B
In the `SPECIFYING RANGES` section of gitrevisions[7], two ways are
described to specify commit ranges that `range-diff` does not yet
accept: "<commit>^!" and "<commit>^-<n>".
Let's accept them, by parsing them via the revision machinery and
looking for at least one interesting and one uninteresting revision in
the resulting `pending` array.
This also finally lets us reject arguments that _do_ contain `..` but
are not actually ranges, e.g. `HEAD^{/do.. match this}`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When comparing commit ranges, one is frequently interested only in one
side, such as asking the question "Has this patch that I submitted to
the Git mailing list been applied?": one would only care about the part
of the output that corresponds to the commits in a local branch.
To make that possible, imitate the `git rev-list` options `--left-only`
and `--right-only`.
This addresses https://github.com/gitgitgadget/git/issues/206
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
range-diff: move the diffopt initialization down one layer
It is actually only the `output()` function that uses those diffopts. By
moving the diffopt initialization down into that function, it is
encapsulated better.
Incidentally, it will also make it easier to implement the `--left-only`
and `--right-only` options in `git range-diff` because the `output()`
function is now receiving all range-diff options as a parameter, not
just the diffopts.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've carried compatibility codepaths for compilers without
variadic macros for quite some time, but the world may be ready for
them to be removed. Force compilation failure on exotic platforms
where variadic macros are not available to find out who screams in
such a way that we can easily revert if it turns out that the world
is not yet ready.
Junio C Hamano [Sat, 6 Feb 2021 00:40:46 +0000 (16:40 -0800)]
Merge branch 'pb/ci-matrix-wo-shortcut'
Our setting of GitHub CI test jobs were a bit too eager to give up
once there is even one failure found. Tweak the knob to allow
other jobs keep running even when we see a failure, so that we can
find more failures in a single run.
* pb/ci-matrix-wo-shortcut:
ci: do not cancel all jobs of a matrix if one fails
The "pack-objects" command needs to iterate over all the tags when
automatic tag following is enabled, but it actually iterated over
all refs and then discarded everything outside "refs/tags/"
hierarchy, which was quite wasteful.
* jv/pack-objects-narrower-ref-iteration:
builtin/pack-objects.c: avoid iterating all refs
Junio C Hamano [Sat, 6 Feb 2021 00:40:45 +0000 (16:40 -0800)]
Merge branch 'ph/use-delete-refs'
When removing many branches and tags, the code used to do so one
ref at a time. There is another API it can use to delete multiple
refs, and it makes quite a lot of performance difference when the
refs are packed.
* ph/use-delete-refs:
use delete_refs when deleting tags or branches
Junio C Hamano [Sat, 6 Feb 2021 00:40:45 +0000 (16:40 -0800)]
Merge branch 'tb/ls-refs-optim'
The ls-refs protocol operation has been optimized to narrow the
sub-hierarchy of refs/ it walks to produce response.
* tb/ls-refs-optim:
ls-refs.c: traverse prefixes of disjoint "ref-prefix" sets
ls-refs.c: initialize 'prefixes' before using it
refs: expose 'for_each_fullref_in_prefixes'
Junio C Hamano [Sat, 6 Feb 2021 00:40:44 +0000 (16:40 -0800)]
Merge branch 'zh/ls-files-deduplicate'
"git ls-files" can and does show multiple entries when the index is
unmerged, which is a source for confusion unless -s/-u option is in
use. A new option --deduplicate has been introduced.
* zh/ls-files-deduplicate:
ls-files.c: add --deduplicate option
ls_files.c: consolidate two for loops into one
ls_files.c: bugfix for --deleted and --modified
Junio C Hamano [Sat, 6 Feb 2021 00:40:44 +0000 (16:40 -0800)]
Merge branch 'ds/cache-tree-basics'
Document, clean-up and optimize the code around the cache-tree
extension in the index.
* ds/cache-tree-basics:
cache-tree: speed up consecutive path comparisons
cache-tree: use ce_namelen() instead of strlen()
index-format: discuss recursion of cache-tree better
index-format: update preamble to cache tree extension
index-format: use 'cache tree' over 'cached tree'
cache-tree: trace regions for prime_cache_tree
cache-tree: trace regions for I/O
cache-tree: use trace2 in cache_tree_update()
unpack-trees: add trace2 regions
tree-walk: report recursion counts
Junio C Hamano [Sat, 6 Feb 2021 00:40:44 +0000 (16:40 -0800)]
Merge branch 'en/ort-conflict-handling'
ORT merge strategy learns more support for merge conflicts.
* en/ort-conflict-handling:
merge-ort: add handling for different types of files at same path
merge-ort: copy find_first_merges() implementation from merge-recursive.c
merge-ort: implement format_commit()
merge-ort: copy and adapt merge_submodule() from merge-recursive.c
merge-ort: copy and adapt merge_3way() from merge-recursive.c
merge-ort: flesh out implementation of handle_content_merge()
merge-ort: handle book-keeping around two- and three-way content merge
merge-ort: implement unique_path() helper
merge-ort: handle directory/file conflicts that remain
merge-ort: handle D/F conflict where directory disappears due to merge
Junio C Hamano [Sat, 6 Feb 2021 00:40:44 +0000 (16:40 -0800)]
Merge branch 'so/log-diff-merge'
"git log" learned a new "--diff-merges=<how>" option.
* so/log-diff-merge: (32 commits)
t4013: add tests for --diff-merges=first-parent
doc/git-show: include --diff-merges description
doc/rev-list-options: document --first-parent changes merges format
doc/diff-generate-patch: mention new --diff-merges option
doc/git-log: describe new --diff-merges options
diff-merges: add '--diff-merges=1' as synonym for 'first-parent'
diff-merges: add old mnemonic counterparts to --diff-merges
diff-merges: let new options enable diff without -p
diff-merges: do not imply -p for new options
diff-merges: implement new values for --diff-merges
diff-merges: make -m/-c/--cc explicitly mutually exclusive
diff-merges: refactor opt settings into separate functions
diff-merges: get rid of now empty diff_merges_init_revs()
diff-merges: group diff-merge flags next to each other inside 'rev_info'
diff-merges: split 'ignore_merges' field
diff-merges: fix -m to properly override -c/--cc
t4013: add tests for -m failing to override -c/--cc
t4013: support test_expect_failure through ':failure' magic
diff-merges: revise revs->diff flag handling
diff-merges: handle imply -p on -c/--cc logic for log.c
...
Junio C Hamano [Sat, 6 Feb 2021 00:31:27 +0000 (16:31 -0800)]
Merge branch 'jk/log-cherry-pick-duplicate-patches' into maint
When more than one commit with the same patch ID appears on one
side, "git log --cherry-pick A...B" did not exclude them all when a
commit with the same patch ID appears on the other side. Now it
does.
Junio C Hamano [Sat, 6 Feb 2021 00:31:22 +0000 (16:31 -0800)]
Merge branch 'mt/t4129-with-setgid-dir' into maint
Some tests expect that "ls -l" output has either '-' or 'x' for
group executable bit, but setgid bit can be inherited from parent
directory and make these fields 'S' or 's' instead, causing test
failures.
* mt/t4129-with-setgid-dir:
t4129: don't fail if setgid is set in the test directory
Jonathan Tan [Fri, 5 Feb 2021 20:48:49 +0000 (12:48 -0800)]
clone: respect remote unborn HEAD
Teach Git to use the "unborn" feature introduced in a previous patch as
follows: Git will always send the "unborn" argument if it is supported
by the server. During "git clone", if cloning an empty repository, Git
will use the new information to determine the local branch to create. In
all other cases, Git will ignore it.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Fri, 5 Feb 2021 20:48:48 +0000 (12:48 -0800)]
connect, transport: encapsulate arg in struct
In a future patch we plan to return the name of an unborn current branch
from deep in the callchain to a caller via a new pointer parameter that
points at a variable in the caller when the caller calls
get_remote_refs() and transport_get_remote_refs().
In preparation for that, encapsulate the existing ref_prefixes
parameter into a struct. The aforementioned unborn current branch will
go into this new struct in the future patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Fri, 5 Feb 2021 20:48:47 +0000 (12:48 -0800)]
ls-refs: report unborn targets of symrefs
When cloning, we choose the default branch based on the remote HEAD.
But if there is no remote HEAD reported (which could happen if the
target of the remote HEAD is unborn), we'll fall back to using our local
init.defaultBranch. Traditionally this hasn't been a big deal, because
most repos used "master" as the default. But these days it is likely to
cause confusion if the server and client implementations choose
different values (e.g., if the remote started with "main", we may choose
"master" locally, create commits there, and then the user is surprised
when they push to "master" and not "main").
To solve this, the remote needs to communicate the target of the HEAD
symref, even if it is unborn, and "git clone" needs to use this
information.
Currently, symrefs that have unborn targets (such as in this case) are
not communicated by the protocol. Teach Git to advertise and support the
"unborn" feature in "ls-refs" (by default, this is advertised, but
server administrators may turn this off through the lsrefs.unborn
config). This feature indicates that "ls-refs" supports the "unborn"
argument; when it is specified, "ls-refs" will send the HEAD symref with
the name of its unborn target.
This change is only for protocol v2. A similar change for protocol v0
would require independent protocol design (there being no analogous
position to signal support for "unborn") and client-side plumbing of the
data required, so the scope of this patch set is limited to protocol v2.
The client side will be updated to use this in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc requires lists to start with an empty line and uses
different characters for indentation levels ("-", "*", "**", ...).
For special symbols like a dash "--" has to be used and there is
no double arrow "<->", so a left and right arrow "<-->" has to be
combined for that. Lastly for verbatim output a newline followed
by an indentation has to be used.
Fix asciidoc output for lists, special characters and verbatim
text while retaining the readabilty of the original text file.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
range-diff: libify the read_patches() function again
In library functions, we do want to avoid the (simple, but rather final)
`die()` calls, instead returning with a value indicating an error.
Let's do exactly that in the code introduced in b66885a30cb8
(range-diff: add section header instead of diff header, 2019-07-11) that
wants to error out if a diff header could not be parsed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--check-and-set-terms` subcommand is no longer from the
git-bisect.sh shell script. Instead the function
`check_and_set_terms()` is called from the C implementation.
Mentored-by: Lars Schneider <larsxschneider@gmail.com> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --bisect-auto-next subcommand is no longer used from the
git-bisect.sh shell script. Instead the function bisect_auto_next()
is directly called from the C implementation.
Mentored-by: Lars Schneider <larsxschneider@gmail.com> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Wed, 3 Feb 2021 21:54:35 +0000 (22:54 +0100)]
bisect--helper: use `res` instead of return in BISECT_RESET case option
Use `res` variable to store `bisect_reset()` output in BISECT_RESET
case option to make bisect--helper.c more consistent.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--bisect-write` subcommand is no longer used from the
git-bisect.sh shell script. Instead the function `bisect_write()`
is directly called from the C implementation.
Mentored-by: Lars Schneider <larsxschneider@gmail.com> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 3 Feb 2021 21:07:32 +0000 (16:07 -0500)]
doc/git-branch: fix awkward wording for "-c"
The description for "-c" is hard to parse. I think the big issue is lack
of commas, but I've also reordered the words to keep the main focus
point of "instead of renaming, copy" together.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 3 Feb 2021 20:59:58 +0000 (15:59 -0500)]
completion: handle other variants of "branch -m"
We didn't special-case "branch -M" (with a capital M) the same as
"branch -m", nor any of the "--copy" variants. As a result these offered
any ref as the next candidate, and not just branch names.
Note that I rewrapped case-arm line since it's now quite long, and
likewise the one below it for consistency. I also re-ordered the
existing "-D" to make it more obvious how the cases group together.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following sequence leads to a "BUG" assertion running under MacOS:
DIR=git-test-restore-p
Adiarnfd=$(printf 'A\314\210')
DIRNAME=xx${Adiarnfd}yy
mkdir $DIR &&
cd $DIR &&
git init &&
mkdir $DIRNAME &&
cd $DIRNAME &&
echo "Initial" >file &&
git add file &&
echo "One more line" >>file &&
echo y | git restore -p .
Initialized empty Git repository in /tmp/git-test-restore-p/.git/
BUG: pathspec.c:495: error initializing pathspec_item
Cannot close git diff-index --cached --numstat
[snip]
The command `git restore` is run from a directory inside a Git repo.
Git needs to split the $CWD into 2 parts:
The path to the repo and "the rest", if any.
"The rest" becomes a "prefix" later used inside the pathspec code.
As an example, "/path/to/repo/dir-inside-repå" would determine
"/path/to/repo" as the root of the repo, the place where the
configuration file .git/config is found.
The rest becomes the prefix ("dir-inside-repå"), from where the
pathspec machinery expands the ".", more about this later.
If there is a decomposed form, (making the decomposing visible like this),
"dir-inside-rep°a" doesn't match "dir-inside-repå".
Git commands need to:
(a) read the configuration variable "core.precomposeunicode"
(b) precocompose argv[]
(c) precompose the prefix, if there was any
The first commit, 76759c7dff53 "git on Mac OS and precomposed unicode"
addressed (a) and (b).
The call to precompose_argv() was added into parse-options.c,
because that seemed to be a good place when the patch was written.
Commands that don't use parse-options need to do (a) and (b) themselfs.
The commands `diff-files`, `diff-index`, `diff-tree` and `diff`
learned (a) and (b) in
commit 90a78b83e0b8 "diff: run arguments through precompose_argv"
Branch names (or refs in general) using decomposed code points
resulting in decomposed file names had been fixed in
commit 8e712ef6fc97 "Honor core.precomposeUnicode in more places"
The bug report from above shows 2 things:
- more commands need to handle precomposed unicode
- (c) should be implemented for all commands using pathspecs
Solution:
precompose_argv() now handles the prefix (if needed), and is renamed into
precompose_argv_prefix().
Inside this function the config variable core.precomposeunicode is read
into the global variable precomposed_unicode, as before.
This reading is skipped if precomposed_unicode had been read before.
The original patch for preocomposed unicode, 76759c7dff53, placed
precompose_argv() into parse-options.c
Now add it into git.c::run_builtin() as well. Existing precompose
calls in diff-files.c and others may become redundant, and if we
audit the callflows that reach these places to make sure that they
can never be reached without going through the new call added to
run_builtin(), we might be able to remove these existing ones.
But in this commit, we do not bother to do so and leave these
precompose callsites as they are. Because precompose() is
idempotent and can be called on an already precomposed string
safely, this is safer than removing existing calls without fully
vetting the callflows.
There is certainly room for cleanups - this change intends to be a bug fix.
Cleanups needs more tests in e.g. t/t3910-mac-os-precompose.sh, and should
be done in future commits.
[1] git-bugreport-2021-01-06-1209.txt (git can't deal with special characters)
[2] https://lore.kernel.org/git/A102844A-9501-4A86-854D-E3B387D378AA@icloud.com/
Reported-by: Daniel Troger <random_n0body@icloud.com> Helped-By: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pager: properly log pager exit code when signalled
When git invokes a pager that exits with non-zero the common case is
that we'll already return the correct SIGPIPE failure from git itself,
but the exit code logged in trace2 has always been incorrectly
reported[1]. Fix that and log the correct exit code in the logs.
Since this gives us something to test outside of our recently-added
tests needing a !MINGW prerequisite, let's refactor the test to run on
MINGW and actually check for SIGPIPE outside of MINGW.
The wait_or_whine() is only called with a true "in_signal" from from
finish_command_in_signal(), which in turn is only used in pager.c.
The "in_signal && !WIFEXITED(status)" case is not covered by
tests. Let's log the default -1 in that case for good measure.
1. The incorrect logging of the exit code in was seemingly copy/pasted
into finish_command_in_signal() in ee4512ed481 (trace2: create new
combined trace facility, 2019-02-22)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pager: test for exit code with and without SIGPIPE
Add tests for how git behaves when the pager itself exits with
non-zero, as well as for us exiting with 141 when we're killed with
SIGPIPE due to the pager not consuming its output.
There is some recent discussion[1] about these semantics, but aside
from what we want to do in the future, we should have a test for the
current behavior.
This test construct is stolen from 7559a1be8a0 (unblock and unignore
SIGPIPE, 2014-09-18). The reason not to make the test itself depend on
the MINGW prerequisite is to make a subsequent commit easier to read.
Refactor the wait_for_pager() function. Since 507d7804c0b (pager:
don't use unsafe functions in signal handlers, 2015-09-04) the
wait_for_pager() and wait_for_pager_atexit() callers diverged on more
than they shared.
Let's extract the common code into a new close_pager_fds() helper, and
move the parts unique to the only to callers to those functions.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Tue, 2 Feb 2021 03:01:23 +0000 (03:01 +0000)]
commit-graph: prepare commit graph
Before checking if the repository has a commit-graph loaded, be sure
to run prepare_commit_graph(). This is necessary because otherwise
the topo_levels slab is not initialized. As we compute topo_levels for
the new commits, we iterate further into the lower layers since the
first visit to each commit looks as though the topo_level is not
populated.
By properly initializing the topo_slab, we fix the previously broken
case of a split commit graph where a base layer has the
generation_data_overflow chunk.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Tue, 2 Feb 2021 03:01:22 +0000 (03:01 +0000)]
commit-graph: be extra careful about mixed generations
When upgrading to a commit-graph with corrected commit dates from
one without, there are a few things that need to be considered.
When computing generation numbers for the new commit-graph file that
expects to add the generation_data chunk with corrected commit
dates, we need to ensure that the 'generation' member of the
commit_graph_data struct is set to zero for these commits.
Unfortunately, the fallback to use topological level for generation
number when corrected commit dates are not available are causing us
harm here: parsing commits notices that read_generation_data is
false and populates 'generation' with the topological level.
The solution is to iterate through the commits, parse the commits
to populate initial values, then reset the generation values to
zero to trigger recalculation. This loop only occurs when the
existing commit-graph data has no corrected commit dates.
While this improves our situation somewhat, we have not completely
solved the issue for correctly computing generation numbers for mixed
layers. That follows in the next change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Tue, 2 Feb 2021 03:01:21 +0000 (03:01 +0000)]
commit-graph: compute generations separately
The compute_generation_numbers() method was introduced by 3258c663
(commit-graph: compute generation numbers, 2018-05-01) to compute what
is now known as "topological levels". These are still stored in the
commit-graph file for compatibility sake while c1a09119 (commit-graph:
implement corrected commit date, 2021-01-16) updated the method to also
compute the new version of generation numbers: corrected commit date.
It makes sense why these are grouped. They perform very similar walks of
the necessary commits and compute similar maximums over each parent.
However, having these two together conflates them in subtle ways that is
hard to separate.
In particular, the topo_level slab is used to store the topological
levels in all cases, but the commit_graph_data_at(c)->generation member
stores different values depending on the state of the existing
commit-graph file.
* If the existing commit-graph file has a "GDAT" chunk, then these
values represent corrected commit dates.
* If the existing commit-graph file doesn't have a "GDAT" chunk, then
these values are actually the topological levels.
This issue only occurs only when upgrading an existing commit-graph file
into one that has the "GDAT" chunk. The current change does not resolve
this upgrade problem, but splitting the implementation into two pieces
here helps with that process, which will follow in the next change.
The important thing this helps with is the case where the
num_generation_data_overflows was being incremented incorrectly,
triggering a write of the overflow chunk.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Tue, 2 Feb 2021 03:01:20 +0000 (03:01 +0000)]
commit-graph: validate layers for generation data
We need to be extra careful that we don't use corrected
commit dates from any layer of a commit-graph chain if there is a
single commit-graph file that is missing the generation_data chunk.
Update validate_mixed_generation_chain() to correctly update each
layer to ignore the generation_data chunk in this case. It now also
returns 1 if all layers have a generation_data chunk. This return
value will be used in the next change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 1 Feb 2021 17:15:04 +0000 (17:15 +0000)]
commit-graph: always parse before commit_graph_data_at()
There is a subtle failure happening when computing corrected commit
dates with --split enabled. It requires a base layer needing the
generation_data_overflow chunk. Then, the next layer on top
erroneously thinks it needs an overflow chunk due to a bug leading
to recalculating all reachable generation numbers. The output of
the failure is
BUG: commit-graph.c:1912: expected to write 8 bytes to
chunk 47444f56, but wrote 0 instead
These "expected" 8 bytes are due to re-computing the corrected
commit date for the lower layer but the new layer does not need
any overflow.
Add a test to t5318-commit-graph.sh that demonstrates this bug. However,
it does not trigger consistently with the existing code.
The generation number data is stored in a slab and accessed by
commit_graph_data_at(). This data is initialized when parsing a commit,
but is otherwise used assuming it has been populated. The loop in
compute_generation_numbers() did not enforce that all reachable
commits were parsed and had correct values. This could lead to some
problems when writing a commit-graph with corrected commit dates based
on a commit-graph without them.
It has been difficult to identify the issue here because it was so hard
to reproduce. It relies on this uninitialized data having a non-zero
value, but also on specifically in a way that overwrites the existing
data.
This patch adds the extra parse to ensure the data is filled before we
compute the generation number of a commit. This triggers the new test
to fail because the generation number overflow count does not match
between this computation and the write for that chunk.
The actual fix will follow as the next few changes.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test case added by 9466e3809d ("blame: enable funcname blaming with
userdiff driver", 2020-11-01) forgot to quote variable expansions. This
causes failures when the current directory contains blanks.
One variable that the test case introduces will not have IFS characters
and could remain without quotes, but let's quote all expansions for
consistency, not just the one that has the path name.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Acked-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rafael Silva [Wed, 27 Jan 2021 08:03:10 +0000 (09:03 +0100)]
worktree: teach `list` verbose mode
"git worktree list" annotates each worktree according to its state such
as "prunable" or "locked", however it is not immediately obvious why
these worktrees are being annotated. For prunable worktrees a reason
is available that is returned by should_prune_worktree() and for locked
worktrees a reason might be available provided by the user via `lock`
command.
Let's teach "git worktree list" a --verbose mode that outputs the reason
why the worktrees are being annotated. The reason is a text that can take
virtually any size and appending the text on the default columned format
will make it difficult to extend the command with other annotations and
not fit nicely on the screen. In order to address this shortcoming the
annotation is then moved to the next line indented followed by the reason
If the reason is not available the annotation stays on the same line as
the worktree itself.
The output of "git worktree list" with verbose becomes like so:
$ git worktree list --verbose
...
/path/to/locked-no-reason acb124 [branch-a] locked
/path/to/locked-with-reason acc125 [branch-b]
locked: worktree with a locked reason
/path/to/prunable-reason ace127 [branch-d]
prunable: gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rafael Silva [Wed, 27 Jan 2021 08:03:09 +0000 (09:03 +0100)]
worktree: teach `list` to annotate prunable worktree
The "git worktree list" command shows the absolute path to the worktree,
the commit that is checked out, the name of the branch, and a "locked"
annotation if the worktree is locked, however, it does not indicate
whether the worktree is prunable.
The "prune" command will remove a worktree if it is prunable unless
`--dry-run` option is specified. This could lead to a worktree being
removed without the user realizing before it is too late, in case the
user forgets to pass --dry-run for instance. If the "list" command shows
which worktree is prunable, the user could verify before running
"git worktree prune" and hopefully prevents the working tree to be
removed "accidentally" on the worse case scenario.
Let's teach "git worktree list" to show when a worktree is a prunable
candidate for both default and porcelain format.
In the default format a "prunable" text is appended:
In the --porcelain format a prunable label is added followed by
its reason:
$ git worktree list --porcelain
...
worktree /path/to/prunable
HEAD abc1234abc1234abc1234abc1234abc1234abc12
detached
prunable gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rafael Silva [Wed, 27 Jan 2021 08:03:08 +0000 (09:03 +0100)]
worktree: teach `list --porcelain` to annotate locked worktree
Commit c57b3367be (worktree: teach `list` to annotate locked worktree,
2020-10-11) taught "git worktree list" to annotate locked worktrees by
appending "locked" text to its output, however, this is not listed in
the --porcelain format.
Teach "list --porcelain" to do the same and add a "locked" attribute
followed by its reason, thus making both default and porcelain format
consistent. If the locked reason is not available then only "locked"
is shown.
The output of the "git worktree list --porcelain" becomes like so:
In porcelain mode, if the lock reason contains special characters
such as newlines, they are escaped with backslashes and the entire
reason is enclosed in double quotes. For example:
Furthermore, let's update the documentation to state that some
attributes in the porcelain format might be listed alone or together
with its value depending whether the value is available or not. Thus
documenting the case of the new "locked" attribute.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rafael Silva [Wed, 27 Jan 2021 08:03:07 +0000 (09:03 +0100)]
t2402: ensure locked worktree is properly cleaned up
c57b3367be (worktree: teach `list` to annotate locked worktree,
2020-10-11) introduced a new test to ensure locked worktrees are listed
with "locked" annotation. However, the test does not clean up after
itself as "git worktree prune" is not going to remove the locked worktree
in the first place. This not only leaves the test in an unclean state it
also potentially breaks following tests that rely on the
"git worktree list" output.
Let's fix that by unlocking the worktree before the "prune" command.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rafael Silva [Tue, 19 Jan 2021 21:27:35 +0000 (22:27 +0100)]
worktree: teach worktree_lock_reason() to gently handle main worktree
worktree_lock_reason() aborts with an assertion failure when called on
the main worktree since locking the main worktree is nonsensical. Not
only is this behavior undocumented, thus callers might not even be aware
that the call could potentially crash the program, but it also forces
clients to be extra careful:
if (!is_main_worktree(wt) && worktree_locked_reason(...))
...
Since we know that locking makes no sense in the context of the main
worktree, we can simply return false for the main worktree, thus making
client code less complex by eliminating the need for the callers to have
inside knowledge about the implementation:
if (worktree_lock_reason(...))
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
