SZEDER Gábor [Mon, 21 Oct 2019 16:00:40 +0000 (18:00 +0200)]
path.c: clarify trie_find()'s in-code comment
A fairly long comment describes trie_find()'s behavior and shows
examples, but it's slightly incomplete/inaccurate. Update this
comment to specify how trie_find() handles a negative return value
from the given match function.
Furthermore, update the list of examples to include not only two but
three levels of path components. This makes the examples slightly
more complicated, but it can illustrate the behavior in more corner
cases.
Finally, basically everything refers to the data stored for a key as
"value", with two confusing exceptions:
- The type definition of the match function calls its corresponding
parameter 'data'.
Rename that parameter to 'value'. (check_common(), the only
function of this type already calls it 'value').
- The table of examples above trie_find() has a "val from node"
column, which has nothing to do with the value stored in the trie:
it's a "prefix of the key for which the trie contains a value"
that led to that node.
Rename that column header to "prefix to node".
Note that neither the original nor the updated description and
examples correspond 100% to the current implementation, because the
implementation is a bit buggy, but the comment describes the desired
behavior. The bug will be fixed in the last patch of this series.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Mon, 21 Oct 2019 16:00:39 +0000 (18:00 +0200)]
Documentation: mention more worktree-specific exceptions
If a directory in $GIT_DIR is overridden when $GIT_COMMON_DIR is set,
then usually all paths within that directory are overridden as well.
There are a couple of exceptions, though, and two of them, namely
'refs/rewritten' and 'logs/HEAD' are not mentioned in
'gitrepository-layout'. Document them as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark Rushakoff [Sat, 10 Aug 2019 05:59:14 +0000 (22:59 -0700)]
doc: fix repeated words
Inspired by 21416f0a07 ("restore: fix typo in docs", 2019-08-03), I ran
"git grep -E '(\b[a-zA-Z]+) \1\b' -- Documentation/" to find other cases
where words were duplicated, e.g. "the the", and in most cases removed
one of the repeated words.
There were many false positives by this grep command, including
deliberate repeated words like "really really" or valid uses of "that
that" which I left alone, of course.
I also did not correct any of the legitimate, accidentally repeated
words in old RelNotes.
Signed-off-by: Mark Rushakoff <mark.rushakoff@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philip Oakley [Sun, 11 Aug 2019 15:03:38 +0000 (16:03 +0100)]
.mailmap: update email address of Philip Oakley
My IEE 'home for life' email service is being withdrawn on 30 Sept 2019.
Replace with my new email domain.
I also have a secondary (backup) 'home for life' through
<philipoakley@dunelm.org.uk>.
Signed-off-by: Philip Oakley <philipoakley@iee.email> Signed-off-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Sat, 10 Aug 2019 12:11:17 +0000 (20:11 +0800)]
Merge tag 'v2.23.0-rc2' of git://git.kernel.org/pub/scm/git/git
Git 2.23-rc2
* tag 'v2.23.0-rc2' of git://git.kernel.org/pub/scm/git/git: (63 commits)
Git 2.23-rc2
t0000: reword comments for "local" test
t: decrease nesting in test_oid_to_path
sha1-file: release strbuf after use
test-dir-iterator: use path argument directly
dir-iterator: release strbuf after use
commit-graph: release strbufs after use
l10n: reformat some localized strings for v2.23.0
merge-recursive: avoid directory rename detection in recursive case
commit-graph: fix bug around octopus merges
restore: fix typo in docs
doc: typo: s/can not/cannot/ and s/is does/does/
Git 2.23-rc1
log: really flip the --mailmap default
RelNotes/2.23.0: fix a few typos and other minor issues
RelNotes/2.21.1: typofix
log: flip the --mailmap default unconditionally
config: work around bug with includeif:onbranch and early config
A few more last-minute fixes
repack: simplify handling of auto-bitmaps and .keep files
...
Junio C Hamano [Fri, 9 Aug 2019 22:18:19 +0000 (15:18 -0700)]
Merge branch 'cb/xdiff-no-system-includes-in-dot-c' into maint
Compilation fix.
* cb/xdiff-no-system-includes-in-dot-c:
xdiff: remove duplicate headers from xpatience.c
xdiff: remove duplicate headers from xhistogram.c
xdiff: drop system includes in xutils.c
Jeff King [Thu, 8 Aug 2019 09:37:33 +0000 (05:37 -0400)]
t0000: reword comments for "local" test
Commit 01d3a526ad (t0000: check whether the shell supports the "local"
keyword, 2017-10-26) added a test to gather data on whether people run
the test suite with shells that don't support "local".
After almost two years, nobody has complained, and several other uses
have cropped up in test-lib-functions.sh. Let's declare it acceptable to
use.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The stream of symbols that makes up this function is hard for humans
to follow, too. The complexity mostly comes from the repeated use of
the expression ${1#??} for the basename of the loose object. Use a
variable instead --- nowadays, the dialect of shell used by Git
permits local variables, so this is cheap.
An alternative way to work around [*] is to remove the double-quotes
around test_oid_to_path's return value. That makes the expression
easier for dash to read, but harder for humans. Let's prefer the
rephrasing that's helpful for humans, too.
Noticed by building on Ubuntu trusty, which uses dash 0.5.7.
[*] Fixed by v0.5.8~13 ("[EXPAND] Propagate EXP_QPAT in subevalvar, 2013-08-23).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 5 Aug 2019 22:33:50 +0000 (15:33 -0700)]
merge-recursive: avoid directory rename detection in recursive case
Ever since commit 8c8e5bd6eb33 ("merge-recursive: switch directory
rename detection default", 2019-04-05), the default handling with
directory rename detection was to report a conflict and leave unstaged
entries in the index. However, when creating a virtual merge base in
the recursive case, we absolutely need a tree, and the only way a tree
can be written is if we have no unstaged entries -- otherwise we hit a
BUG().
There are a few fixes possible here which at least fix the BUG(), but
none of them seem optimal for other reasons; see the comments with the
new testcase 13e in t6043 for details (which testcase triggered a BUG()
prior to this patch). As such, just opt for a very conservative and
simple choice that is still relatively reasonable: have the recursive
case treat 'conflict' as 'false' for opt->detect_directory_renames.
Reported-by: Emily Shaffer <emilyshaffer@google.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 5 Aug 2019 16:43:41 +0000 (09:43 -0700)]
commit-graph: fix bug around octopus merges
In 1771be90 "commit-graph: merge commit-graph chains" (2019-06-18),
the method sort_and_scan_merged_commits() was added to merge the
commit lists of two commit-graph files in the incremental format.
Unfortunately, there was an off-by-one error in that method around
incrementing num_extra_edges, which leads to an incorrect offset
for the base graph chunk.
When we store an octopus merge in the commit-graph file, we store
the first parent in the normal place, but use the second parent
position to point into the "extra edges" chunk where the remaining
parents exist. This means we should be adding "num_parents - 1"
edges to this list, not "num_parents - 2". That is the basic error.
The reason this was not caught in the test suite is more subtle.
In 5324-split-commit-graph.sh, we test creating an octopus merge
and adding it to the tip of a commit-graph chain, then verify the
result. This _should_ have caught the problem, except that when
we load the commit-graph files we were overly careful to not fail
when the commit-graph chain does not match. This care was on
purpose to avoid race conditions as one process reads the chain
and another process modifies it. In such a case, the reading
process outputs the following message to stderr:
warning: commit-graph chain does not match
These warnings are output in the test suite, but ignored. By
checking the stderr of `git commit-graph verify` to include
the expected progress output, it will now catch this error.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark Rushakoff [Sat, 3 Aug 2019 05:33:51 +0000 (22:33 -0700)]
doc: typo: s/can not/cannot/ and s/is does/does/
"Can not" suggests one has the option to not do something, whereas
"cannot" more strongly suggests something is disallowed or impossible.
Noticed "can not", mistakenly used instead of "cannot" in git help
glossary, then ran git grep 'can not' and found many other instances.
Only files in the Documentation folder were modified.
'Can not' also occurs in some source code comments and some test
assertion messages, and there is an error message and translation "can
not move directory into itself" which I may fix and submit separately
from the documentation change.
Also noticed and fixed "is does" in git help fetch, but there are no
other occurrences of that typo according to git grep.
Signed-off-by: Mark Rushakoff <mark.rushakoff@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 2 Aug 2019 20:12:02 +0000 (13:12 -0700)]
Merge branch 'js/visual-studio'
Support building Git with Visual Studio
The bits about .git/branches/* have been dropped from the series.
We may want to drop the support for it, but until that happens, the
tests should rely on the existence of the support to pass.
* js/visual-studio: (23 commits)
git: avoid calling aliased builtins via their dashed form
bin-wrappers: append `.exe` to target paths if necessary
.gitignore: ignore Visual Studio's temporary/generated files
.gitignore: touch up the entries regarding Visual Studio
vcxproj: also link-or-copy builtins
msvc: add a Makefile target to pre-generate the Visual Studio solution
contrib/buildsystems: add a backend for modern Visual Studio versions
contrib/buildsystems: handle options starting with a slash
contrib/buildsystems: also handle -lexpat
contrib/buildsystems: handle libiconv, too
contrib/buildsystems: handle the curl library option
contrib/buildsystems: error out on unknown option
contrib/buildsystems: optionally capture the dry-run in a file
contrib/buildsystems: redirect errors of the dry run into a log file
contrib/buildsystems: ignore gettext stuff
contrib/buildsystems: handle quoted spaces in filenames
contrib/buildsystems: fix misleading error message
contrib/buildsystems: ignore irrelevant files in Generators/
contrib/buildsystems: ignore invalidcontinue.obj
Vcproj.pm: urlencode '<' and '>' when generating VC projects
...
Junio C Hamano [Fri, 2 Aug 2019 20:12:02 +0000 (13:12 -0700)]
Merge branch 'js/early-config-with-onbranch'
The recently added [includeif "onbranch:branch"] feature does not
work well with an early config mechanism, as it attempts to find
out what branch we are on before we even haven't located the git
repository. The inclusion during early config scan is ignored to
work around this issue.
* js/early-config-with-onbranch:
config: work around bug with includeif:onbranch and early config
Squelch unneeded and misleading warnings from "repack" when the
command attempts to generate pack bitmaps without explicitly asked
for by the user.
* jk/repack-silence-auto-bitmap-warning:
repack: simplify handling of auto-bitmaps and .keep files
repack: silence warnings when auto-enabled bitmaps cannot be built
t7700: clean up .keep file in bitmap-writing test
Junio C Hamano [Thu, 1 Aug 2019 16:10:49 +0000 (09:10 -0700)]
Merge branch 'bc/hash-independent-tests-part-4'
Update to the tests to help SHA-256 transition continues.
* bc/hash-independent-tests-part-4:
t2203: avoid hard-coded object ID values
t1710: make hash independent
t1007: remove SHA1 prerequisites
t0090: make test pass with SHA-256
t0027: make hash size independent
t6030: make test work with SHA-256
t5000: make hash independent
t1450: make hash size independent
t1410: make hash size independent
t: add helper to convert object IDs to paths
Martin Ågren [Thu, 1 Aug 2019 14:12:20 +0000 (16:12 +0200)]
RelNotes/2.23.0: fix a few typos and other minor issues
Fix the spelling of the new "--no-show-forced-updates" option that "git
fetch/pull" learned. Similarly, spell "--function-context" correctly and
fix a few typos, grammos and minor mistakes.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 1 Aug 2019 15:32:44 +0000 (08:32 -0700)]
log: flip the --mailmap default unconditionally
It turns out that being cautious to warn against upcoming default
change was an unpopular behaviour, and such a care can easily be
defeated by distro packagers to render it ineffective anyway.
Just flip the default, with only a mention in the release notes.
config: work around bug with includeif:onbranch and early config
Since 07b2c0eacac (config: learn the "onbranch:" includeIf condition,
2019-06-05), there is a potential catch-22 in the early config path: if
the `include.onbranch:` feature is used, Git assumes that the Git
directory has been initialized already. However, in the early config
code path that is not true.
One way to trigger this is to call the following commands in any
repository:
git config includeif.onbranch:refs/heads/master.path broken
git help -a
The symptom triggered by the `git help -a` invocation reads like this:
BUG: refs.c:1851: attempting to get main_ref_store outside of repository
Let's work around this, simply by ignoring the `includeif.onbranch:`
setting when parsing the config when the ref store has not been
initialized (yet).
Technically, there is a way to solve this properly: teach the refs
machinery to initialize the ref_store from a given gitdir/commondir pair
(which we _do_ have in the early config code path), and then use that in
`include_by_branch()`. This, however, is a pretty involved project, and
we're already in the feature freeze for Git v2.23.0.
Note: when calling above-mentioned two commands _outside_ of any Git
worktree (passing the `--global` flag to `git config`, as there is
obviously no repository config available), at the point when
`include_by_branch()` is called, `the_repository` is `NULL`, therefore
we have to be extra careful not to dereference it in that case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/xdiff-no-system-includes-in-dot-c:
xdiff: remove duplicate headers from xpatience.c
xdiff: remove duplicate headers from xhistogram.c
xdiff: drop system includes in xutils.c
Jeff King [Wed, 31 Jul 2019 05:40:56 +0000 (01:40 -0400)]
repack: simplify handling of auto-bitmaps and .keep files
Commit 7328482253 (repack: disable bitmaps-by-default if .keep files
exist, 2019-06-29) taught repack to prefer disabling bitmaps to
duplicating objects (unless bitmaps were asked for explicitly).
But there's an easier way to do this: if we keep passing the
--honor-pack-keep flag to pack-objects when auto-enabling bitmaps, then
pack-objects already makes the same decision (it will disable bitmaps
rather than duplicate). Better still, pack-objects can actually decide
to do so based not just on the presence of a .keep file, but on whether
that .keep file actually impacts the new pack we're making (so if we're
racing with a push or fetch, for example, their temporary .keep file
will not block us from generating bitmaps if they haven't yet updated
their refs).
And because repack uses the --write-bitmap-index-quiet flag, we don't
have to worry about pack-objects generating confusing warnings when it
does see a .keep file. We can confirm this by tweaking the .keep test to
check repack's stderr.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 31 Jul 2019 05:39:27 +0000 (01:39 -0400)]
repack: silence warnings when auto-enabled bitmaps cannot be built
Depending on various config options, a full repack may not be able to
build a reachability bitmap index (e.g., if pack.packSizeLimit forces us
to write multiple packs). In these cases pack-objects may write a
warning to stderr.
Since 36eba0323d (repack: enable bitmaps by default on bare repos,
2019-03-14), we may generate these warnings even when the user did not
explicitly ask for bitmaps. This has two downsides:
- it can be confusing, if they don't know what bitmaps are
- a daemonized auto-gc will write this to its log file, and the
presence of the warning may suppress further auto-gc (until
gc.logExpiry has elapsed)
Let's have repack communicate to pack-objects that the choice to turn on
bitmaps was not made explicitly by the user, which in turn allows
pack-objects to suppress these warnings.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 31 Jul 2019 05:37:36 +0000 (01:37 -0400)]
t7700: clean up .keep file in bitmap-writing test
After our test snippet finishes, the .keep file is left in place, making
it hard to do further tests of the auto-bitmap-writing code (since it
suppresses the feature completely). Let's clean it up.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 31 Jul 2019 01:23:37 +0000 (21:23 -0400)]
t: sort output of hashmap iteration
The iteration order of a hashmap is undefined, and may depend on things
like the exact set of items added, or the table has been grown or
shrunk. In the case of an oidmap, it even depends on endianness, because
we take the oid hash by casting sha1 bytes directly into an unsigned
int.
Let's sort the test-tool output from any hash iterators. In the case of
t0011, this is just future-proofing. But for t0016, it actually fixes a
reported failure on the big-endian s390 and nonstop ports.
I didn't bother to teach the helper functions to optionally sort output.
They are short enough that it's simpler to just repeat them inline for
the iteration tests than it is to add a --sort option.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge tag 'v2.23.0-rc0' of git://git.kernel.org/pub/scm/git/git
Git 2.23-rc0
* tag 'v2.23.0-rc0' of git://git.kernel.org/pub/scm/git/git: (420 commits)
Git 2.23-rc0
Merge fixes made on the 'master' front
Flush fixes up to the third batch post 2.22.0
The seventh batch
git: mark cmd_rebase as requiring a worktree
rebase: fix white-space
xdiff: clamp function context indices in post-image
grep: print the pcre2_jit_on value
t6200: use test_commit_bulk
travis-ci: build with GCC 4.8 as well
The sixth batch
clean: show an error message when the path is too long
CodingGuidelines: spell out post-C89 rules
README: fix rendering of text in angle brackets
rm: resolving by removal is not a warning-worthy event
transport-helper: avoid var decl in for () loop control
stash: fix handling removed files with --keep-index
mingw: support spawning programs containing spaces in their names
gpg-interface: do not scan past the end of buffer
tests: defang pager tests by explicitly disabling the log.mailmap warning
...
git: avoid calling aliased builtins via their dashed form
This is one of the few places where Git violates its own deprecation of
the dashed form. It is not necessary, either.
As of 595d59e2b53 (git.c: ignore pager.* when launching builtin as
dashed external, 2017-08-02), Git wants to ignore the pager.* config
setting when expanding aliases. So let's strip out the
check_pager_config(<command-name>) call from the copy-edited code.
This code actually made it into upstream git.git already, but it was
disabled in `#if 0 ... #endif` guards so far.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bin-wrappers: append `.exe` to target paths if necessary
When compiling with Visual Studio, the projects' names are identical to
the executables modulo the extensions. Read: there will exist both a
directory called `git` as well as an executable called `git.exe` in the
end. Which means that the bin-wrappers *need* to target the `.exe` files
lest they try to execute directories.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philip Oakley [Mon, 29 Jul 2019 20:08:14 +0000 (13:08 -0700)]
.gitignore: touch up the entries regarding Visual Studio
Add the Microsoft .manifest pattern, and do not anchor the 'Debug'
and 'Release' entries at the top-level directory, to allow for
multiple projects (one per target).
Signed-off-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default location for `.exe` files linked by Visual Studio depends on
the mode (debug vs release) and the architecture. Meaning: after a full
build, there is a `git.exe` in the top-level directory, but none of the
built-ins are linked..
When running a test script in Git Bash, it therefore would pick up the
wrong, say, `git-receive-pack.exe`: the one installed at the same time
as the Git Bash.
Absolutely not what we want. We want to have confidence that our test
covers the MSVC-built Git executables, and not some random stuff.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
msvc: add a Makefile target to pre-generate the Visual Studio solution
The entire idea of generating the VS solution makes only sense if we
generate it via Continuous Integration; otherwise potential users would
still have to download the entire Git for Windows SDK.
If we pre-generate the Visual Studio solution, Git can be built entirely
within Visual Studio, and the test scripts can be run in a regular Git
for Windows (e.g. the Portable Git flavor, which does not include a full
GCC toolchain and therefore weighs only about a tenth of Git for
Windows' SDK).
So let's just add a target in the Makefile that can be used to generate
said solution; The generated files will then be committed so that they
can be pushed to a branch ready to check out by Visual Studio users.
To make things even more useful, we also generate and commit other files
that are required to run the test suite, such as templates and
bin-wrappers: with this, developers can run the test suite in a regular
Git Bash after building the solution in Visual Studio.
Note: for this build target, we do not actually need to initialize the
`vcpkg` system, so we don't.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
contrib/buildsystems: add a backend for modern Visual Studio versions
Based on the previous patches in this patch series that fixed the
generator for `.vcproj` files (which were used by Visual Studio prior to
2015 to define projects), this patch offers to generate project
definitions for neweer versions of Visual Studio (which use `.vcxproj`
files).
To that end, this patch copy-edits the generator of the `.vcproj`.
In addition, we now use the `vcpkg` system which allows us to build
Git's dependencies (e.g. curl, libexpat) conveniently. The support
scripts were introduced in the `jh/msvc` patch series, and with this
patch we initialize the `vcpkg` conditionally, in the `libgit` project's
`PreBuildEvent`. To allow for parallel building of the projects, we
therefore put `libgit` at the bottom of the project hierarchy.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
contrib/buildsystems: handle options starting with a slash
With the recent changes to allow building with MSVC=1, we now pass the
/OPT:REF option to the compiler. This confuses the parser that wants to
turn the output of a dry run into project definitions for QMake and Visual
Studio:
Unhandled link option @ line 213: /OPT:REF at [...]
Let's just extend the code that passes through options that start with a
dash, so that it passes through options that start with a slash, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's test suite shows tons of breakages unless Git is compiled
*without* NO_ICONV. That means, in turn, that we need to generate
build definitions *with* libiconv, which in turn implies that we
have to handle the -liconv option properly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philip Oakley [Mon, 29 Jul 2019 20:08:09 +0000 (13:08 -0700)]
contrib/buildsystems: handle the curl library option
Upon seeing the '-lcurl' option, point to the libcurl.lib.
While there, fix the elsif indentation.
Signed-off-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
One time too many did this developer call the `generate` script passing
a `--make-out=<PATH>` option that was happily ignored (because there
should be a space, not an equal sign, between `--make-out` and the
path).
And one time too many, this script not only ignored it but did not even
complain. Let's fix that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philip Oakley [Mon, 29 Jul 2019 20:08:07 +0000 (13:08 -0700)]
contrib/buildsystems: optionally capture the dry-run in a file
Add an option for capturing the output of the make dry-run used in
determining the msvc-build structure for easy debugging.
You can use the output of `--make-out <path>` in subsequent runs via the
`--in <path>` option.
Signed-off-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philip Oakley [Mon, 29 Jul 2019 20:08:07 +0000 (13:08 -0700)]
contrib/buildsystems: redirect errors of the dry run into a log file
Rather than swallowing the errors, it is better to have them in a file.
To make it obvious what this is about, use the file name
'msvc-build-makedryerrors.txt'.
Further, if the output is empty, simply delete that file. As we target
Git for Windows' SDK (which, unlike its predecessor msysGit, offers Perl
versions newer than 5.8), we can use the quite readable syntax `if -f -z
$ErrsFile` (available in Perl >=5.10).
Note that the file will contain the new values of the GIT_VERSION and
GITGUI_VERSION if they were generated by the make file. They are omitted
if the release is tagged and indentically defined in their respective
GIT_VERSION_GEN file DEF_VER variables.
Signed-off-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philip Oakley [Mon, 29 Jul 2019 20:08:06 +0000 (13:08 -0700)]
contrib/buildsystems: ignore gettext stuff
Git's build contains steps to handle internationalization. This caused
hiccups in the parser used to generate QMake/Visual Studio project files.
As those steps are irrelevant in this context, let's just ignore them.
Signed-off-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philip Oakley [Mon, 29 Jul 2019 20:08:05 +0000 (13:08 -0700)]
contrib/buildsystems: handle quoted spaces in filenames
The engine.pl script expects file names not to contain spaces. However,
paths with spaces are quite prevalent on Windows. Use shellwords() rather
than split() to parse them correctly.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message talked about a "lib option", but it clearly referred
to a link option.
Signed-off-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
contrib/buildsystems: ignore irrelevant files in Generators/
The Generators/ directory can contain spurious files such as editors'
backup files. Even worse, there could be .swp files which are not even
valid Perl scripts.
Let's just ignore anything but .pm files in said directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philip Oakley [Mon, 29 Jul 2019 20:08:03 +0000 (13:08 -0700)]
contrib/buildsystems: ignore invalidcontinue.obj
Since 4b623d8 (MSVC: link in invalidcontinue.obj for better POSIX
compatibility, 2014-03-29), invalidcontinue.obj is linked in the MSVC
build, but it was not parsed correctly by the buildsystem. Ignore it, as
it is known to Visual Studio and will be handled elsewhere.
Also only substitute filenames ending with .o when generating the
source .c filename, otherwise we would start to expect .cbj files to
generate .obj files (which are not generated by our build)...
In the future there may be source files that produce .obj files
so keep the two issues (.obj files with & without source files)
separate.
Signed-off-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Duncan Smart <duncan.smart@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philip Oakley [Mon, 29 Jul 2019 20:08:01 +0000 (13:08 -0700)]
Vcproj.pm: list git.exe first to be startup project
Visual Studio takes the first listed application/library as the default
startup project [1].
Detect the 'git' project and place it at the head of the project list,
rather than at the tail.
Export the apps list before libs list for both the projects and global
structures of the .sln file.
[1] http://stackoverflow.com/questions/1238553/
vs2008-where-is-the-startup-project-setting-stored-for-a-solution
"In the solution file, there are a list of pseudo-XML "Project"
entries. It turns out that whatever is the first one ends up as
the Startup Project, unless it’s overridden in the suo file. Argh.
I just rearranged the order in the file and it’s good."
"just moving the pseudo-xml isn't enough. You also have to move the
group of entries in the "GlobalSection(ProjectConfigurationPlatforms)
= postSolution" group that has the GUID of the project you moved to
the top. So there are two places to move lines."
Signed-off-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We ran out GUIDs. Again. But there is no need to: we can generate them
semi-randomly from the target file name of the project.
Note: the Vcproj generator is probably only interesting for historical
reasons; nevertheless, the upcoming Vcxproj generator (to support modern
Visual Studio versions) is based on the Vcproj generator and it is
better to fix this here first.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
