Junio C Hamano [Fri, 21 Oct 2011 17:49:26 +0000 (10:49 -0700)]
Merge branch 'nd/maint-autofix-tag-in-head' into maint
* nd/maint-autofix-tag-in-head:
Accept tags in HEAD or MERGE_HEAD
merge: remove global variable head[]
merge: use return value of resolve_ref() to determine if HEAD is invalid
merge: keep stash[] a local variable
Junio C Hamano [Wed, 19 Oct 2011 17:49:09 +0000 (10:49 -0700)]
Merge branch 'rs/pickaxe'
* rs/pickaxe:
pickaxe: factor out pickaxe
pickaxe: give diff_grep the same signature as has_changes
pickaxe: pass diff_options to contains and has_changes
pickaxe: factor out has_changes
pickaxe: plug regex/kws leak
pickaxe: plug regex leak
pickaxe: plug diff filespec leak with empty needle
* js/no-cherry-pick-head-after-punted:
cherry-pick: do not give irrelevant advice when cherry-pick punted
revert.c: defer writing CHERRY_PICK_HEAD till it is safe to do so
Junio C Hamano [Wed, 19 Oct 2011 17:48:38 +0000 (10:48 -0700)]
Merge branch 'bk/submodule-in-recursive-merge'
* bk/submodule-in-recursive-merge:
submodule: Search for merges only at end of recursive merge
submodule: Demonstrate known breakage during recursive merge
Johannes Sixt [Wed, 19 Oct 2011 07:37:06 +0000 (09:37 +0200)]
t1300: attempting to remove a non-existent .git/config is not an error
Since some tests before test number 79 ("quoting") are skipped, .git/config
does not exist and 'rm .git/config' fails. Fix this particular case.
While at it, move other instance of 'rm .git/config' that occur in this
file inside the test function to document that the test cases want to
protect themselves from remnants of earlier tests.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 19 Oct 2011 04:59:11 +0000 (21:59 -0700)]
Merge branch 'jn/gitweb-manpages'
* jn/gitweb-manpages:
gitweb: Add gitweb manpages to 'gitweb' package in git.spec
Documentation: Add gitweb config variables to git-config(1)
Documentation: Link to gitweb(1) and gitweb.conf(5) in other manpages
gitweb: Add gitweb(1) manpage for gitweb itself
gitweb: Add gitweb.conf(5) manpage for gitweb configuration files
Junio C Hamano [Wed, 19 Oct 2011 04:59:11 +0000 (21:59 -0700)]
Merge branch 'pt/mingw-misc-fixes'
* pt/mingw-misc-fixes:
t9901: fix line-ending dependency on windows
mingw: ensure sockets are initialized before calling gethostname
mergetools: use the correct tool for Beyond Compare 3 on Windows
t9300: do not run --cat-blob-fd related tests on MinGW
git-svn: On MSYS, escape and quote SVN_SSH also if set by the user
t9001: do not fail only due to CR/LF issues
t1020: disable the pwd test on MinGW
Brandon Casey [Thu, 6 Oct 2011 04:21:33 +0000 (23:21 -0500)]
strbuf.c: remove unnecessary strbuf_grow() from strbuf_getwholeline()
This use of strbuf_grow() is a historical artifact that was once used to
ensure that strbuf.buf was allocated and properly nul-terminated. This
was added before the introduction of the slopbuf in b315c5c0, which
guarantees that strbuf.buf always points to a usable nul-terminated string.
So let's remove it.
Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 18 Oct 2011 04:37:15 +0000 (21:37 -0700)]
Merge branch 'jk/http-auth'
* jk/http-auth:
http_init: accept separate URL parameter
http: use hostname in credential description
http: retry authentication failures for all http requests
remote-curl: don't retry auth failures with dumb protocol
improve httpd auth tests
url: decode buffers that are not NUL-terminated
Junio C Hamano [Mon, 17 Oct 2011 18:43:30 +0000 (11:43 -0700)]
resolve_gitlink_packed_ref(): fix mismerge
2c5c66b (Merge branch 'jp/get-ref-dir-unsorted', 2011-10-10) merged a
topic that forked from the mainline before a new helper function
get_packed_refs() refactored code to read packed-refs file. The merge made
the call to the helper function with an incorrect argument. The parameter
to the function has to be a path to the submodule.
Fix the mismerge.
Helped-by: Mark Levedahl <mlevedahl@gmail.com> Helped-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Sun, 16 Oct 2011 11:07:33 +0000 (13:07 +0200)]
Documentation: Link to gitweb(1) and gitweb.conf(5) in other manpages
Add link to gitweb(1) in "SEE ALSO" section of git-instaweb(1) manpage,
and "Ancillary Commands" section of git(1) manpage (the latter by the
way of command-list.txt file).
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Sun, 16 Oct 2011 11:07:32 +0000 (13:07 +0200)]
gitweb: Add gitweb(1) manpage for gitweb itself
Most of what is in gitweb.txt it has been pulled directly from the
README and INSTALL files of gitweb.
Current version is somewhat based on structure of SVN::Web manpage
(one of web interfaces for Subversion).
gitweb.conf(5) i.e. gitweb configuration manpage now refers to
appropriate sections in gitweb(1). gitweb/README now refers to
gitweb/INSTALL and gitweb(1) manpage. gitweb/INSTALL now refers to
gitweb.conf(5) and gitweb(1).
Inspired-by: Drew Northup <drew.northup@maine.edu> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drew Northup [Sun, 16 Oct 2011 11:07:31 +0000 (13:07 +0200)]
gitweb: Add gitweb.conf(5) manpage for gitweb configuration files
Much of what is in gitweb.conf.txt has been pulled directly from the
README file of gitweb. The manpage was supplemented with description
of missing gitweb config variables, and with description of gitweb's
%features.
There remains a bit of redundancy, which should be reduced if
possible... but I think some of duplication of information is
inevitable.
[jn: Improved, extended, removed duplicate info from README]
Signed-off-by: Drew Northup <drew.northup@maine.edu> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 16 Oct 2011 10:01:44 +0000 (03:01 -0700)]
Merge git://repo.or.cz/git-gui
* git://repo.or.cz/git-gui:
git-gui: incremental goto line in blame view
git-gui: clear the goto line input when hiding
git-gui: only accept numbers in the goto-line input
git-gui: search and linenumber input are mutual exclusive in the blame view
git-gui: deal with unknown files when pressing the "Stage Changed" button
git-gui: drop the 'n' and 'Shift-n' bindings from the last patch.
git-gui: Add keyboard shortcuts for search and goto commands in blame view.
git-gui: Enable jumping to a specific line number in blame view.
Fix tooltip display with multiple monitors on windows.
Fix typo: existant->existent
git-gui: updated translator README for current procedures.
git-gui: warn when trying to commit on a detached head
git-gui: Corrected a typo in the Swedish translation of 'Continue'
Michael Olson [Mon, 10 Oct 2011 23:27:37 +0000 (16:27 -0700)]
git-svn: Allow certain refs to be ignored
Implement a new --ignore-refs option which specifies a regex of refs
to ignore while importing svn history.
This is a useful supplement to the --ignore-paths option, as that
option only operates on the contents of branches and tags, not the
branches and tags themselves.
Signed-off-by: Michael Olson <mwolson@gnu.org> Acked-by: Eric Wong <normalperson@yhbt.net>
Allow the user to check the patch set before it is commited to SVN. It is
then possible to accept/discard one patch, accept all, or quit.
This interactive mode is similar with 'git send email' behaviour. However,
'git svn dcommit' returns as soon as one patch is discarded.
Part of the code was taken from git-send-email.perl (see 'ask' function)
Tests several combinations of potential answers to
'git svn dcommit --interactive'. For each of them, test whether patches
were commited to SVN or not.
Thanks-to Eric Wong <normalperson@yhbt.net> for the initial idea.
Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Frédéric Heitzmann <frederic.heitzmann@gmail.com>
Jeff King [Fri, 14 Oct 2011 07:40:40 +0000 (09:40 +0200)]
http_init: accept separate URL parameter
The http_init function takes a "struct remote". Part of its
initialization procedure is to look at the remote's url and
grab some auth-related parameters. However, using the url
included in the remote is:
- wrong; the remote-curl helper may have a separate,
unrelated URL (e.g., from remote.*.pushurl). Looking at
the remote's configured url is incorrect.
- incomplete; http-fetch doesn't have a remote, so passes
NULL. So http_init never gets to see the URL we are
actually going to use.
- cumbersome; http-push has a similar problem to
http-fetch, but actually builds a fake remote just to
pass in the URL.
Instead, let's just add a separate URL parameter to
http_init, and all three callsites can pass in the
appropriate information.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 16 Oct 2011 03:46:38 +0000 (20:46 -0700)]
Merge branch 'bk/ancestry-path' into maint
* bk/ancestry-path:
t6019: avoid refname collision on case-insensitive systems
revision: do not include sibling history in --ancestry-path output
revision: keep track of the end-user input from the command line
rev-list: Demonstrate breakage with --ancestry-path --all
Junio C Hamano [Sun, 16 Oct 2011 03:46:36 +0000 (20:46 -0700)]
Merge branch 'jc/diff-index-unpack' into maint
* jc/diff-index-unpack:
diff-index: pass pathspec down to unpack-trees machinery
unpack-trees: allow pruning with pathspec
traverse_trees(): allow pruning with pathspec
Junio C Hamano [Sun, 16 Oct 2011 03:46:36 +0000 (20:46 -0700)]
Merge branch 'mm/rebase-i-exec-edit' into maint
* mm/rebase-i-exec-edit:
rebase -i: notice and warn if "exec $cmd" modifies the index or the working tree
rebase -i: clean error message for --continue after failed exec
Matthew Daley [Sat, 15 Oct 2011 08:44:52 +0000 (04:44 -0400)]
send-email: Honour SMTP domain when using TLS
git-send-email sends two SMTP EHLOs when using TLS encryption, however
only the first, unencrypted EHLO uses the SMTP domain that can be
optionally specified by the user (--smtp-domain). This is because the
call to hello() that produces the second, encrypted EHLO does not pass
the SMTP domain as an argument, and hence a default of
'localhost.localdomain' is used instead.
Fix by passing in the SMTP domain in this call.
Signed-off-by: Matthew Daley <mattjd@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pat Thoyts [Sat, 15 Oct 2011 14:05:20 +0000 (15:05 +0100)]
mingw: ensure sockets are initialized before calling gethostname
If the Windows sockets subsystem has not been initialized yet then an
attempt to get the hostname returns an error and prints a warning to the
console. This solves this issue for msysGit as seen with 'git fetch'.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pat Thoyts [Sat, 15 Oct 2011 14:05:19 +0000 (15:05 +0100)]
mergetools: use the correct tool for Beyond Compare 3 on Windows
On Windows the bcompare tool launches a graphical program and does
not wait for it to terminate. A separate 'bcomp' tool is provided which
will wait for the view to exit so we use this instead.
Reported-by: Werner BEROUX <werner@beroux.com> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9300: do not run --cat-blob-fd related tests on MinGW
As diagnosed by Johannes Sixt, msys.dll does not hand through file
descriptors > 2 to child processes, so these test cases cannot passes when
run through an MSys bash.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: On MSYS, escape and quote SVN_SSH also if set by the user
While GIT_SSH does not require any escaping / quoting (e.g. for paths
containing spaces), SVN_SSH requires it due to its use in a Perl script.
Previously, SVN_SSH has only been escaped and quoted automatically if it
was unset and thus derived from GIT_SSH. For user convenience, do the
escaping and quoting also for a SVN_SSH set by the user. This way, the
user is able to use the same unescaped and unquoted syntax for GIT_SSH
and SVN_SSH.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cord Seele [Fri, 14 Oct 2011 20:53:31 +0000 (22:53 +0200)]
send-email: Fix %config_path_settings handling
cec5dae (use new Git::config_path() for aliasesfile, 2011-09-30) broke
the expansion of aliases.
This was caused by treating %config_path_settings, newly introduced in
said patch, like %config_bool_settings instead of like %config_settings.
Copy from %config_settings, making it more readable.
While at it add basic test for expansion of aliases, and for path
expansion, which would catch this error.
Nb. there were a few issues that were responsible for this error:
1. %config_bool_settings and %config_settings despite similar name have
different semantic.
%config_bool_settings values are arrays where the first element is
(reference to) the variable to set, and second element is default
value... which admittedly is a bit cryptic. More readable if more
verbose option would be to use hash reference, e.g.:
%config_settings values are either either reference to scalar variable
or reference to array. In second case it means that option (or config
option) is multi-valued. BTW. this is similar to what Getopt::Long does.
2. In cec5dae (use new Git::config_path() for aliasesfile, 2011-09-30)
the setting "aliasesfile" was moved from %config_settings to newly
introduced %config_path_settings. But the loop that parses settings
from %config_path_settings was copy'n'pasted *wrongly* from
%config_bool_settings instead of from %config_settings.
It looks like cec5dae author cargo-culted this change...
3. 994d6c6 (send-email: address expansion for common mailers, 2006-05-14)
didn't add test for alias expansion to t9001-send-email.sh
Signed-off-by: Cord Seele <cowose@gmail.com> Tested-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 14 Oct 2011 02:03:22 +0000 (19:03 -0700)]
Merge branch 'rs/pending'
* rs/pending:
commit: factor out clear_commit_marks_for_object_array
checkout: use leak_pending flag
bundle: use leak_pending flag
bisect: use leak_pending flag
revision: add leak_pending flag
checkout: use add_pending_{object,sha1} in orphan check
revision: factor out add_pending_sha1
checkout: check for "Previous HEAD" notice in t2020
projects / thirdparty / git.git / log
