Junio C Hamano [Fri, 12 Feb 2021 22:21:04 +0000 (14:21 -0800)]
Merge branch 'tb/precompose-prefix-too'
When commands are started from a subdirectory, they may have to
compare the path to the subdirectory (called prefix and found out
from $(pwd)) with the tracked paths. On macOS, $(pwd) and
readdir() yield decomposed path, while the tracked paths are
usually normalized to the precomposed form, causing mismatch. This
has been fixed by taking the same approach used to normalize the
command line arguments.
Junio C Hamano [Fri, 12 Feb 2021 22:21:04 +0000 (14:21 -0800)]
Merge branch 'jk/complete-branch-force-delete'
The command line completion (in contrib/) completed "git branch -d"
with branch names, but "git branch -D" offered tagnames in addition,
which has been corrected. "git branch -M" had the same problem.
* jk/complete-branch-force-delete:
doc/git-branch: fix awkward wording for "-c"
completion: handle other variants of "branch -m"
completion: treat "branch -D" the same way as "branch -d"
Junio C Hamano [Fri, 12 Feb 2021 22:21:04 +0000 (14:21 -0800)]
Merge branch 'tb/pack-revindex-on-disk'
Introduce an on-disk file to record revindex for packdata, which
traditionally was always created on the fly and only in-core.
* tb/pack-revindex-on-disk:
t5325: check both on-disk and in-memory reverse index
pack-revindex: ensure that on-disk reverse indexes are given precedence
t: support GIT_TEST_WRITE_REV_INDEX
t: prepare for GIT_TEST_WRITE_REV_INDEX
Documentation/config/pack.txt: advertise 'pack.writeReverseIndex'
builtin/pack-objects.c: respect 'pack.writeReverseIndex'
builtin/index-pack.c: write reverse indexes
builtin/index-pack.c: allow stripping arbitrary extensions
pack-write.c: prepare to write 'pack-*.rev' files
packfile: prepare for the existence of '*.rev' files
Junio C Hamano [Fri, 12 Feb 2021 22:21:04 +0000 (14:21 -0800)]
Merge branch 'ab/tests-various-fixup'
Various test updates.
* ab/tests-various-fixup:
rm tests: actually test for SIGPIPE in SIGPIPE test
archive tests: use a cheaper "zipinfo -h" invocation to get header
upload-pack tests: avoid a non-zero "grep" exit status
git-svn tests: rewrite brittle tests to use "--[no-]merges".
git svn mergeinfo tests: refactor "test -z" to use test_must_be_empty
git svn mergeinfo tests: modernize redirection & quoting style
cache-tree tests: explicitly test HEAD and index differences
cache-tree tests: use a sub-shell with less indirection
cache-tree tests: remove unused $2 parameter
cache-tree tests: refactor for modern test style
Junio C Hamano [Thu, 11 Feb 2021 21:58:43 +0000 (13:58 -0800)]
Merge branch 'en/merge-ort-perf'
The "ort" merge strategy.
* en/merge-ort-perf:
merge-ort: begin performance work; instrument with trace2_region_* calls
merge-ort: ignore the directory rename split conflict for now
merge-ort: fix massive leak
Junio C Hamano [Thu, 11 Feb 2021 21:58:43 +0000 (13:58 -0800)]
Merge branch 'en/ort-directory-rename'
ORT merge strategy learns to infer "renamed directory" while
merging.
* en/ort-directory-rename:
merge-ort: fix a directory rename detection bug
merge-ort: process_renames() now needs more defensiveness
merge-ort: implement apply_directory_rename_modifications()
merge-ort: add a new toplevel_dir field
merge-ort: implement handle_path_level_conflicts()
merge-ort: implement check_for_directory_rename()
merge-ort: implement apply_dir_rename() and check_dir_renamed()
merge-ort: implement compute_collisions()
merge-ort: modify collect_renames() for directory rename handling
merge-ort: implement handle_directory_level_conflicts()
merge-ort: implement compute_rename_counts()
merge-ort: copy get_renamed_dir_portion() from merge-recursive.c
merge-ort: add outline of get_provisional_directory_renames()
merge-ort: add outline for computing directory renames
merge-ort: collect which directories are removed in dirs_removed
merge-ort: initialize and free new directory rename data structures
merge-ort: add new data structures for directory rename detection
Junio C Hamano [Thu, 11 Feb 2021 00:48:07 +0000 (16:48 -0800)]
Merge branch 'tb/ci-run-cocci-with-18.04'
The version of Ubuntu Linux used by default at GitHub Actions CI
has been updated to one that lack coccinelle; until it gets fixed,
work it around by sticking to the previous release (18.04).
* tb/ci-run-cocci-with-18.04:
.github/workflows/main.yml: run static-analysis on bionic
Junio C Hamano [Wed, 10 Feb 2021 22:48:33 +0000 (14:48 -0800)]
Merge branch 'ab/detox-gettext-tests'
Get rid of "GETTEXT_POISON" support altogether, which may or may
not be controversial.
* ab/detox-gettext-tests:
tests: remove uses of GIT_TEST_GETTEXT_POISON=false
tests: remove support for GIT_TEST_GETTEXT_POISON
ci: remove GETTEXT_POISON jobs
Junio C Hamano [Wed, 10 Feb 2021 22:48:33 +0000 (14:48 -0800)]
Merge branch 'jk/pretty-lazy-load-commit'
Some pretty-format specifiers do not need the data in commit object
(e.g. "%H"), but we were over-eager to load and parse it, which has
been made even lazier.
* jk/pretty-lazy-load-commit:
pretty: lazy-load commit data when expanding user-format
Junio C Hamano [Wed, 10 Feb 2021 22:48:32 +0000 (14:48 -0800)]
Merge branch 'js/rebase-i-commit-cleanup-fix'
When "git rebase -i" processes "fixup" insn, there is no reason to
clean up the commit log message, but we did the usual stripspace
processing. This has been corrected.
* js/rebase-i-commit-cleanup-fix:
rebase -i: do leave commit message intact in fixup! chains
Junio C Hamano [Wed, 10 Feb 2021 22:48:32 +0000 (14:48 -0800)]
Merge branch 'jk/t0000-cleanups'
Code clean-up.
* jk/t0000-cleanups:
t0000: consistently use single quotes for outer tests
t0000: run cleaning test inside sub-test
t0000: run prereq tests inside sub-test
t0000: keep clean-up tests together
Junio C Hamano [Wed, 10 Feb 2021 22:48:31 +0000 (14:48 -0800)]
Merge branch 'jk/use-oid-pos'
Code clean-up to ensure our use of hashtables using object names as
keys use the "struct object_id" objects, not the raw hash values.
* jk/use-oid-pos:
oid_pos(): access table through const pointers
hash_pos(): convert to oid_pos()
rerere: use strmap to store rerere directories
rerere: tighten rr-cache dirname check
rerere: check dirname format while iterating rr_cache directory
commit_graft_pos(): take an oid instead of a bare hash
Taylor Blau [Mon, 8 Feb 2021 21:22:34 +0000 (16:22 -0500)]
.github/workflows/main.yml: run static-analysis on bionic
GitHub Actions is transitioning workflow steps that run on
'ubuntu-latest' from 18.04 to 20.04 [1].
This works fine in all steps except the static-analysis one, since
Coccinelle isn't available on Ubuntu focal (it is only available in the
universe suite).
Until Coccinelle can be installed from 20.04's main suite, pin the
static-analysis build to run on 18.04, where it can be installed by
default.
Junio C Hamano [Mon, 8 Feb 2021 22:05:55 +0000 (14:05 -0800)]
Merge branch 'pb/ci-matrix-wo-shortcut' into maint
Our setting of GitHub CI test jobs were a bit too eager to give up
once there is even one failure found. Tweak the knob to allow
other jobs keep running even when we see a failure, so that we can
find more failures in a single run.
* pb/ci-matrix-wo-shortcut:
ci: do not cancel all jobs of a matrix if one fails
Junio C Hamano [Mon, 8 Feb 2021 22:05:55 +0000 (14:05 -0800)]
Merge branch 'ab/branch-sort' into maint
The implementation of "git branch --sort" wrt the detached HEAD
display has always been hacky, which has been cleaned up.
* ab/branch-sort:
branch: show "HEAD detached" first under reverse sort
branch: sort detached HEAD based on a flag
ref-filter: move ref_sorting flags to a bitfield
ref-filter: move "cmp_fn" assignment into "else if" arm
ref-filter: add braces to if/else if/else chain
branch tests: add to --sort tests
branch: change "--local" to "--list" in comment
Junio C Hamano [Mon, 8 Feb 2021 22:05:54 +0000 (14:05 -0800)]
Merge branch 'ma/more-opaque-lock-file' into maint
Code clean-up.
* ma/more-opaque-lock-file:
read-cache: try not to peek into `struct {lock_,temp}file`
refs/files-backend: don't peek into `struct lock_file`
midx: don't peek into `struct lock_file`
commit-graph: don't peek into `struct lock_file`
builtin/gc: don't peek into `struct lock_file`
Junio C Hamano [Mon, 8 Feb 2021 22:05:53 +0000 (14:05 -0800)]
Merge branch 'ma/t1300-cleanup' into maint
Code clean-up.
* ma/t1300-cleanup:
t1300: don't needlessly work with `core.foo` configs
t1300: remove duplicate test for `--file no-such-file`
t1300: remove duplicate test for `--file ../foo`
We've carried compatibility codepaths for compilers without
variadic macros for quite some time, but the world may be ready for
them to be removed. Force compilation failure on exotic platforms
where variadic macros are not available to find out who screams in
such a way that we can easily revert if it turns out that the world
is not yet ready.
Junio C Hamano [Sat, 6 Feb 2021 00:40:46 +0000 (16:40 -0800)]
Merge branch 'pb/ci-matrix-wo-shortcut'
Our setting of GitHub CI test jobs were a bit too eager to give up
once there is even one failure found. Tweak the knob to allow
other jobs keep running even when we see a failure, so that we can
find more failures in a single run.
* pb/ci-matrix-wo-shortcut:
ci: do not cancel all jobs of a matrix if one fails
The "pack-objects" command needs to iterate over all the tags when
automatic tag following is enabled, but it actually iterated over
all refs and then discarded everything outside "refs/tags/"
hierarchy, which was quite wasteful.
* jv/pack-objects-narrower-ref-iteration:
builtin/pack-objects.c: avoid iterating all refs
Junio C Hamano [Sat, 6 Feb 2021 00:40:45 +0000 (16:40 -0800)]
Merge branch 'ph/use-delete-refs'
When removing many branches and tags, the code used to do so one
ref at a time. There is another API it can use to delete multiple
refs, and it makes quite a lot of performance difference when the
refs are packed.
* ph/use-delete-refs:
use delete_refs when deleting tags or branches
Junio C Hamano [Sat, 6 Feb 2021 00:40:45 +0000 (16:40 -0800)]
Merge branch 'tb/ls-refs-optim'
The ls-refs protocol operation has been optimized to narrow the
sub-hierarchy of refs/ it walks to produce response.
* tb/ls-refs-optim:
ls-refs.c: traverse prefixes of disjoint "ref-prefix" sets
ls-refs.c: initialize 'prefixes' before using it
refs: expose 'for_each_fullref_in_prefixes'
Junio C Hamano [Sat, 6 Feb 2021 00:40:44 +0000 (16:40 -0800)]
Merge branch 'zh/ls-files-deduplicate'
"git ls-files" can and does show multiple entries when the index is
unmerged, which is a source for confusion unless -s/-u option is in
use. A new option --deduplicate has been introduced.
* zh/ls-files-deduplicate:
ls-files.c: add --deduplicate option
ls_files.c: consolidate two for loops into one
ls_files.c: bugfix for --deleted and --modified
Junio C Hamano [Sat, 6 Feb 2021 00:40:44 +0000 (16:40 -0800)]
Merge branch 'ds/cache-tree-basics'
Document, clean-up and optimize the code around the cache-tree
extension in the index.
* ds/cache-tree-basics:
cache-tree: speed up consecutive path comparisons
cache-tree: use ce_namelen() instead of strlen()
index-format: discuss recursion of cache-tree better
index-format: update preamble to cache tree extension
index-format: use 'cache tree' over 'cached tree'
cache-tree: trace regions for prime_cache_tree
cache-tree: trace regions for I/O
cache-tree: use trace2 in cache_tree_update()
unpack-trees: add trace2 regions
tree-walk: report recursion counts
Junio C Hamano [Sat, 6 Feb 2021 00:40:44 +0000 (16:40 -0800)]
Merge branch 'en/ort-conflict-handling'
ORT merge strategy learns more support for merge conflicts.
* en/ort-conflict-handling:
merge-ort: add handling for different types of files at same path
merge-ort: copy find_first_merges() implementation from merge-recursive.c
merge-ort: implement format_commit()
merge-ort: copy and adapt merge_submodule() from merge-recursive.c
merge-ort: copy and adapt merge_3way() from merge-recursive.c
merge-ort: flesh out implementation of handle_content_merge()
merge-ort: handle book-keeping around two- and three-way content merge
merge-ort: implement unique_path() helper
merge-ort: handle directory/file conflicts that remain
merge-ort: handle D/F conflict where directory disappears due to merge
Junio C Hamano [Sat, 6 Feb 2021 00:40:44 +0000 (16:40 -0800)]
Merge branch 'so/log-diff-merge'
"git log" learned a new "--diff-merges=<how>" option.
* so/log-diff-merge: (32 commits)
t4013: add tests for --diff-merges=first-parent
doc/git-show: include --diff-merges description
doc/rev-list-options: document --first-parent changes merges format
doc/diff-generate-patch: mention new --diff-merges option
doc/git-log: describe new --diff-merges options
diff-merges: add '--diff-merges=1' as synonym for 'first-parent'
diff-merges: add old mnemonic counterparts to --diff-merges
diff-merges: let new options enable diff without -p
diff-merges: do not imply -p for new options
diff-merges: implement new values for --diff-merges
diff-merges: make -m/-c/--cc explicitly mutually exclusive
diff-merges: refactor opt settings into separate functions
diff-merges: get rid of now empty diff_merges_init_revs()
diff-merges: group diff-merge flags next to each other inside 'rev_info'
diff-merges: split 'ignore_merges' field
diff-merges: fix -m to properly override -c/--cc
t4013: add tests for -m failing to override -c/--cc
t4013: support test_expect_failure through ':failure' magic
diff-merges: revise revs->diff flag handling
diff-merges: handle imply -p on -c/--cc logic for log.c
...
Junio C Hamano [Sat, 6 Feb 2021 00:31:27 +0000 (16:31 -0800)]
Merge branch 'jk/log-cherry-pick-duplicate-patches' into maint
When more than one commit with the same patch ID appears on one
side, "git log --cherry-pick A...B" did not exclude them all when a
commit with the same patch ID appears on the other side. Now it
does.
Junio C Hamano [Sat, 6 Feb 2021 00:31:22 +0000 (16:31 -0800)]
Merge branch 'mt/t4129-with-setgid-dir' into maint
Some tests expect that "ls -l" output has either '-' or 'x' for
group executable bit, but setgid bit can be inherited from parent
directory and make these fields 'S' or 's' instead, causing test
failures.
* mt/t4129-with-setgid-dir:
t4129: don't fail if setgid is set in the test directory
Jeff King [Wed, 3 Feb 2021 21:07:32 +0000 (16:07 -0500)]
doc/git-branch: fix awkward wording for "-c"
The description for "-c" is hard to parse. I think the big issue is lack
of commas, but I've also reordered the words to keep the main focus
point of "instead of renaming, copy" together.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 3 Feb 2021 20:59:58 +0000 (15:59 -0500)]
completion: handle other variants of "branch -m"
We didn't special-case "branch -M" (with a capital M) the same as
"branch -m", nor any of the "--copy" variants. As a result these offered
any ref as the next candidate, and not just branch names.
Note that I rewrapped case-arm line since it's now quite long, and
likewise the one below it for consistency. I also re-ordered the
existing "-D" to make it more obvious how the cases group together.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following sequence leads to a "BUG" assertion running under MacOS:
DIR=git-test-restore-p
Adiarnfd=$(printf 'A\314\210')
DIRNAME=xx${Adiarnfd}yy
mkdir $DIR &&
cd $DIR &&
git init &&
mkdir $DIRNAME &&
cd $DIRNAME &&
echo "Initial" >file &&
git add file &&
echo "One more line" >>file &&
echo y | git restore -p .
Initialized empty Git repository in /tmp/git-test-restore-p/.git/
BUG: pathspec.c:495: error initializing pathspec_item
Cannot close git diff-index --cached --numstat
[snip]
The command `git restore` is run from a directory inside a Git repo.
Git needs to split the $CWD into 2 parts:
The path to the repo and "the rest", if any.
"The rest" becomes a "prefix" later used inside the pathspec code.
As an example, "/path/to/repo/dir-inside-repå" would determine
"/path/to/repo" as the root of the repo, the place where the
configuration file .git/config is found.
The rest becomes the prefix ("dir-inside-repå"), from where the
pathspec machinery expands the ".", more about this later.
If there is a decomposed form, (making the decomposing visible like this),
"dir-inside-rep°a" doesn't match "dir-inside-repå".
Git commands need to:
(a) read the configuration variable "core.precomposeunicode"
(b) precocompose argv[]
(c) precompose the prefix, if there was any
The first commit, 76759c7dff53 "git on Mac OS and precomposed unicode"
addressed (a) and (b).
The call to precompose_argv() was added into parse-options.c,
because that seemed to be a good place when the patch was written.
Commands that don't use parse-options need to do (a) and (b) themselfs.
The commands `diff-files`, `diff-index`, `diff-tree` and `diff`
learned (a) and (b) in
commit 90a78b83e0b8 "diff: run arguments through precompose_argv"
Branch names (or refs in general) using decomposed code points
resulting in decomposed file names had been fixed in
commit 8e712ef6fc97 "Honor core.precomposeUnicode in more places"
The bug report from above shows 2 things:
- more commands need to handle precomposed unicode
- (c) should be implemented for all commands using pathspecs
Solution:
precompose_argv() now handles the prefix (if needed), and is renamed into
precompose_argv_prefix().
Inside this function the config variable core.precomposeunicode is read
into the global variable precomposed_unicode, as before.
This reading is skipped if precomposed_unicode had been read before.
The original patch for preocomposed unicode, 76759c7dff53, placed
precompose_argv() into parse-options.c
Now add it into git.c::run_builtin() as well. Existing precompose
calls in diff-files.c and others may become redundant, and if we
audit the callflows that reach these places to make sure that they
can never be reached without going through the new call added to
run_builtin(), we might be able to remove these existing ones.
But in this commit, we do not bother to do so and leave these
precompose callsites as they are. Because precompose() is
idempotent and can be called on an already precomposed string
safely, this is safer than removing existing calls without fully
vetting the callflows.
There is certainly room for cleanups - this change intends to be a bug fix.
Cleanups needs more tests in e.g. t/t3910-mac-os-precompose.sh, and should
be done in future commits.
[1] git-bugreport-2021-01-06-1209.txt (git can't deal with special characters)
[2] https://lore.kernel.org/git/A102844A-9501-4A86-854D-E3B387D378AA@icloud.com/
Reported-by: Daniel Troger <random_n0body@icloud.com> Helped-By: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test case added by 9466e3809d ("blame: enable funcname blaming with
userdiff driver", 2020-11-01) forgot to quote variable expansions. This
causes failures when the current directory contains blanks.
One variable that the test case introduces will not have IFS characters
and could remain without quotes, but let's quote all expansions for
consistency, not just the one that has the path name.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Acked-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rafael Silva [Wed, 27 Jan 2021 08:03:10 +0000 (09:03 +0100)]
worktree: teach `list` verbose mode
"git worktree list" annotates each worktree according to its state such
as "prunable" or "locked", however it is not immediately obvious why
these worktrees are being annotated. For prunable worktrees a reason
is available that is returned by should_prune_worktree() and for locked
worktrees a reason might be available provided by the user via `lock`
command.
Let's teach "git worktree list" a --verbose mode that outputs the reason
why the worktrees are being annotated. The reason is a text that can take
virtually any size and appending the text on the default columned format
will make it difficult to extend the command with other annotations and
not fit nicely on the screen. In order to address this shortcoming the
annotation is then moved to the next line indented followed by the reason
If the reason is not available the annotation stays on the same line as
the worktree itself.
The output of "git worktree list" with verbose becomes like so:
$ git worktree list --verbose
...
/path/to/locked-no-reason acb124 [branch-a] locked
/path/to/locked-with-reason acc125 [branch-b]
locked: worktree with a locked reason
/path/to/prunable-reason ace127 [branch-d]
prunable: gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rafael Silva [Wed, 27 Jan 2021 08:03:09 +0000 (09:03 +0100)]
worktree: teach `list` to annotate prunable worktree
The "git worktree list" command shows the absolute path to the worktree,
the commit that is checked out, the name of the branch, and a "locked"
annotation if the worktree is locked, however, it does not indicate
whether the worktree is prunable.
The "prune" command will remove a worktree if it is prunable unless
`--dry-run` option is specified. This could lead to a worktree being
removed without the user realizing before it is too late, in case the
user forgets to pass --dry-run for instance. If the "list" command shows
which worktree is prunable, the user could verify before running
"git worktree prune" and hopefully prevents the working tree to be
removed "accidentally" on the worse case scenario.
Let's teach "git worktree list" to show when a worktree is a prunable
candidate for both default and porcelain format.
In the default format a "prunable" text is appended:
In the --porcelain format a prunable label is added followed by
its reason:
$ git worktree list --porcelain
...
worktree /path/to/prunable
HEAD abc1234abc1234abc1234abc1234abc1234abc12
detached
prunable gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rafael Silva [Wed, 27 Jan 2021 08:03:08 +0000 (09:03 +0100)]
worktree: teach `list --porcelain` to annotate locked worktree
Commit c57b3367be (worktree: teach `list` to annotate locked worktree,
2020-10-11) taught "git worktree list" to annotate locked worktrees by
appending "locked" text to its output, however, this is not listed in
the --porcelain format.
Teach "list --porcelain" to do the same and add a "locked" attribute
followed by its reason, thus making both default and porcelain format
consistent. If the locked reason is not available then only "locked"
is shown.
The output of the "git worktree list --porcelain" becomes like so:
In porcelain mode, if the lock reason contains special characters
such as newlines, they are escaped with backslashes and the entire
reason is enclosed in double quotes. For example:
Furthermore, let's update the documentation to state that some
attributes in the porcelain format might be listed alone or together
with its value depending whether the value is available or not. Thus
documenting the case of the new "locked" attribute.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rafael Silva [Wed, 27 Jan 2021 08:03:07 +0000 (09:03 +0100)]
t2402: ensure locked worktree is properly cleaned up
c57b3367be (worktree: teach `list` to annotate locked worktree,
2020-10-11) introduced a new test to ensure locked worktrees are listed
with "locked" annotation. However, the test does not clean up after
itself as "git worktree prune" is not going to remove the locked worktree
in the first place. This not only leaves the test in an unclean state it
also potentially breaks following tests that rely on the
"git worktree list" output.
Let's fix that by unlocking the worktree before the "prune" command.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rafael Silva [Tue, 19 Jan 2021 21:27:35 +0000 (22:27 +0100)]
worktree: teach worktree_lock_reason() to gently handle main worktree
worktree_lock_reason() aborts with an assertion failure when called on
the main worktree since locking the main worktree is nonsensical. Not
only is this behavior undocumented, thus callers might not even be aware
that the call could potentially crash the program, but it also forces
clients to be extra careful:
if (!is_main_worktree(wt) && worktree_locked_reason(...))
...
Since we know that locking makes no sense in the context of the main
worktree, we can simply return false for the main worktree, thus making
client code less complex by eliminating the need for the callers to have
inside knowledge about the implementation:
if (worktree_lock_reason(...))
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rafael Silva [Tue, 19 Jan 2021 21:27:34 +0000 (22:27 +0100)]
worktree: teach worktree to lazy-load "prunable" reason
Add worktree_prune_reason() to allow a caller to discover whether a
worktree is prunable and the reason that it is, much like
worktree_lock_reason() indicates whether a worktree is locked and the
reason for the lock. As with worktree_lock_reason(), retrieve the
prunable reason lazily and cache it in the `worktree` structure.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rafael Silva [Tue, 19 Jan 2021 21:27:33 +0000 (22:27 +0100)]
worktree: libify should_prune_worktree()
As part of teaching "git worktree list" to annotate worktree that is a
candidate for pruning, let's move should_prune_worktree() from
builtin/worktree.c to worktree.c in order to make part of the worktree
public API.
should_prune_worktree() knows how to select the given worktree for
pruning based on an expiration date, however the expiration value is
stored in a static file-scope variable and it is not local to the
function. In order to move the function, teach should_prune_worktree()
to take the expiration date as an argument and document the new
parameter that is not immediately obvious.
Also, change the function comment to clearly state that the worktree's
path is returned in `wtpath` argument.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 29 Jan 2021 20:04:08 +0000 (15:04 -0500)]
p5303: avoid sed GNU-ism
Using "1~5" isn't portable. Nobody seems to have noticed, since perhaps
people don't tend to run the perf suite on more exotic platforms. Still,
it's better to set a good example.
We can use:
perl -ne 'print if $. % 5 == 1'
instead. But we can further observe that perl does a good job of the
other parts of this pipeline, and fold the whole thing together.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Fri, 29 Jan 2021 01:32:02 +0000 (20:32 -0500)]
t5325: check both on-disk and in-memory reverse index
Right now, the test suite can be run with 'GIT_TEST_WRITE_REV_INDEX=1'
in the environment, which causes all operations which write a pack to
also write a .rev file.
To prepare for when that eventually becomes the default, we should
continue to test the in-memory reverse index, too, in order to avoid
losing existing coverage. Unfortunately, explicit existing coverage is
rather sparse, so only a basic test is added that compares the result of
Suggested-by: Jeff King <peff@peff.net> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 28 Jan 2021 19:57:39 +0000 (14:57 -0500)]
pretty: lazy-load commit data when expanding user-format
When we expand a user-format, we try to avoid work that isn't necessary
for the output. For instance, we don't bother parsing the commit header
until we know we need the author, subject, etc.
But we do always load the commit object's contents from disk, even if
the format doesn't require it (e.g., just "%H"). Traditionally this
didn't matter much, because we'd have loaded it as part of the traversal
anyway, and we'd typically have those bytes attached to the commit
struct (or these days, cached in a commit-slab).
But when we have a commit-graph, we might easily get to the point of
pretty-printing a commit without ever having looked at the actual object
contents. We should push off that load (and reencoding) until we're
certain that it's needed.
I think the results of p4205 show the advantage pretty clearly (we serve
parent and tree oids out of the commit struct itself, so they benefit as
well):
# using git.git as the test repo
Test HEAD^ HEAD
----------------------------------------------------------------------
4205.1: log with %H 0.40(0.39+0.01) 0.03(0.02+0.01) -92.5%
4205.2: log with %h 0.45(0.44+0.01) 0.09(0.09+0.00) -80.0%
4205.3: log with %T 0.40(0.39+0.00) 0.04(0.04+0.00) -90.0%
4205.4: log with %t 0.46(0.46+0.00) 0.09(0.08+0.01) -80.4%
4205.5: log with %P 0.39(0.39+0.00) 0.03(0.03+0.00) -92.3%
4205.6: log with %p 0.46(0.46+0.00) 0.10(0.09+0.00) -78.3%
4205.7: log with %h-%h-%h 0.52(0.51+0.01) 0.15(0.14+0.00) -71.2%
4205.8: log with %an-%ae-%s 0.42(0.41+0.00) 0.42(0.41+0.01) +0.0%
# using linux.git as the test repo
Test HEAD^ HEAD
----------------------------------------------------------------------
4205.1: log with %H 7.12(6.97+0.14) 0.76(0.65+0.11) -89.3%
4205.2: log with %h 7.35(7.19+0.16) 1.30(1.19+0.11) -82.3%
4205.3: log with %T 7.58(7.42+0.15) 1.02(0.94+0.08) -86.5%
4205.4: log with %t 8.05(7.89+0.15) 1.55(1.41+0.13) -80.7%
4205.5: log with %P 7.12(7.01+0.10) 0.76(0.69+0.07) -89.3%
4205.6: log with %p 7.38(7.27+0.10) 1.32(1.20+0.12) -82.1%
4205.7: log with %h-%h-%h 7.81(7.67+0.13) 1.79(1.67+0.12) -77.1%
4205.8: log with %an-%ae-%s 7.90(7.74+0.15) 7.81(7.66+0.15) -1.1%
I added the final test to show where we don't improve (the 1% there is
just lucky noise), but also as a regression test to make sure we're not
doing anything stupid like loading the commit multiple times when there
are several placeholders that need it.
Reported-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase -i: do leave commit message intact in fixup! chains
In 6e98de72c03 (sequencer (rebase -i): add support for the 'fixup' and
'squash' commands, 2017-01-02), this developer introduced a change of
behavior by mistake: when encountering a `fixup!` commit (or multiple
`fixup!` commits) without any `squash!` commit thrown in, the final `git
commit` was invoked with `--cleanup=strip`. Prior to that commit, the
commit command had been called without that `--cleanup` option.
Since we explicitly read the original commit message from a file in that
case, there is really no sense in forcing that clean-up.
We actually need to actively suppress that clean-up lest a configured
`commit.cleanup` may interfere with what we want to do: leave the commit
message unchanged.
Reported-by: Vojtěch Knyttl <vojtech@knyt.tl> Helped-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 28 Jan 2021 06:32:37 +0000 (01:32 -0500)]
t0000: consistently use single quotes for outer tests
When we use the sub-test helpers, we end up defining one shell snippet
inside another shell snippet. So if we use single-quotes for the outer
snippet, we have to use double-quotes within the inner snippet (it's
included as here-doc within the outer snippet, but using a single quote
would end the outer snippet early). Or vice versa we can use double
quotes for the outer snippet, but then single quotes in the inner.
We have some of each in the script, and neither is wrong. But it would
be nice to be consistent unless there is a good reason not to. Using
single quotes for the outer script is preferable, because it requires
less metacharacter quoting overall. For example, in:
The exception is when we need a literal single-quote in an expected
output here-doc. There we can either use outer double-quotes, or just
use ${SQ} within the doc. I chose the latter for consistency (within
this test, but also with other test scripts that face the same problem).
There is one other interesting case, which is some tests that do:
This is rather confusing to read, but is correct. The outer script sees
'!3' in single-quotes, as does the eval'd snippet. This is perhaps being
overly cautious. In many interactive shells, an exclamation triggers
history expansion even inside double quotes, but that is not generally
true in non-interactive shells.
There's some conflicting information here. Commit 784ce03d55 (t4216:
avoid unnecessary subshell in test_bloom_filters_not_used, 2020-05-19)
reports it as a problem with OpenBSD 6.7's /bin/sh. However, we have
many instances in this script of prereqs like !LAZY_TRUE, which haven't
been a problem. I left them un-escaped here to test out this theory.
It's much nicer if we can not worry about this as a portability issue,
so it's worth knowing.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 28 Jan 2021 06:32:35 +0000 (01:32 -0500)]
t0000: run cleaning test inside sub-test
Our check of test_when_finished is done directly in the main script, and
if we failed to clean, we complain and exit immediately. It's nicer to
signal a test failure here, for a few reasons:
- this gives better output to the user when run under a TAP harness
like "prove"
- constency; it's the only test left in the file that behaves this way
- half of its "if" conditional is nonsense anyway; it picked up a
reference to GIT_TEST_FAIL_PREREQS_INTERNAL in dfe1a17df9 (tests:
add a special setup where prerequisites fail, 2019-05-13) along with
its neighbors, even though it has nothing to do with that flag
We could actually do this without a sub-test at all, and just put our
two tests (one to do cleanup, and one to check that it happened) in the
main script. But doing it in a subtest is conceptually cleaner (from the
perspective of the main test script, we are checking only one thing),
and it remains consistent with the "cleanup when failing" test directly
after it, which has to happen in a sub-test (to avoid the main script
complaining of the failed test).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
