rebase: fix regression in rebase.useBuiltin=false test mode
Fix a recently introduced regression in c762aada1a ("rebase -x: sanity
check command", 2019-01-29) triggered when running the tests with
GIT_TEST_REBASE_USE_BUILTIN=false. See 62c23938fa ("tests: add a
special setup where rebase.useBuiltin is off", 2018-11-14) for how
that test mode works.
As discussed on-list[1] it's not worth it to implement the sanity
check in the legacy rebase code, we plan to remove it after the 2.21
release. So let's do the bare minimum to make the tests pass under the
GIT_TEST_REBASE_USE_BUILTIN=false special setup.
Jeff King [Tue, 12 Feb 2019 06:33:04 +0000 (01:33 -0500)]
RelNotes/2.21: misc typo/English fixups
These are just some small fixes I noticed doing a complete read-through
(there are a few cases I left that are incomplete or abbreviated
sentences, but I think those are OK in this sort of bullet-list style).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 9 Feb 2019 04:44:51 +0000 (20:44 -0800)]
Merge branch 'nd/checkout-noisy-unmerge'
"git checkout [<tree-ish>] <pathspec>" started reporting the number
of paths that have got updated recently, but the same messages were
given when "git checkout -m <pathspec>" to unresolve conflicts that
have just been resolved. The message now reports these unresolved
paths separately from the paths that are checked out from the index.
Todd Zullinger [Fri, 8 Feb 2019 03:17:46 +0000 (22:17 -0500)]
t/lib-gpg: drop redundant killing of gpg-agent
In 53fc999306 ("gpg-interface t: extend the existing GPG tests with
GPGSM", 2018-07-20), the gpgconf call which kills gpg-agent was copied
from the existing gpg setup code.
The reason for killing gpg-agent is given in 29ff1f8f74 ("t: lib-gpg:
flush gpg agent on startup", 2017-07-20):
When running gpg-relevant tests, a gpg-daemon is spawned for each
GNUPGHOME used. This daemon may stay running after the test and cache
file descriptors for the trash directories, even after the trash
directory is removed. This leads to ENOENT errors when attempting to
create files if tests are run multiple times.
Add a cleanup script to force flushing the gpg-agent for that GNUPGHOME
(if any) before setting up the GPG relevant-environment.
Killing gpg-agent once per test is sufficient.
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Todd Zullinger [Fri, 8 Feb 2019 03:17:45 +0000 (22:17 -0500)]
t/lib-gpg: quote path to ${GNUPGHOME}/trustlist.txt
When gpgsm is installed, lib-gpg.sh attempts to update trustlist.txt to
relax the checking of some root certificate requirements. The path to
"${GNUPGHOME}" contains spaces which cause an "ambiguous redirect"
warning when bash is used to run the tests:
$ bash t7030-verify-tag.sh
/git/t/lib-gpg.sh: line 66: ${GNUPGHOME}/trustlist.txt: ambiguous redirect
ok 1 - create signed tags
ok 2 # skip create signed tags x509 (missing GPGSM)
...
No warning is issued when using bash called as /bin/sh, dash, or mksh.
Quote the path to ensure the redirect works as intended and sets the
GPGSM prereq. While we're here, drop the space after ">>".
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mingw: fix CPU reporting in `git version --build-options`
We cannot rely on `uname -m` in Git for Windows' SDK to tell us what
architecture we are compiling for, as we can compile both 32-bit and
64-bit `git.exe` from a 64-bit SDK, but the `uname -m` in that SDK will
always report `x86_64`.
So let's go back to our original design. And make it explicitly
Windows-specific.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Josh Steadmon [Thu, 7 Feb 2019 20:05:54 +0000 (12:05 -0800)]
object: fix leak of shallow_stat
In eee4502baaf ("shallow: migrate shallow information into the object
parser", 2018-05-17), we added a stat_validity pointer into the
parsed_object_pool struct, but did not add code to free this in
parsed_object_pool_clear(). This leak was found by fuzz-commit-graph.
Clear the struct and then free it in parsed_object_pool_clear() to
prevent the leak.
Signed-off-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
doc: prevent overflowing <code> tag in rendered HTML
Add an apparently missing back-tick to fix a multi-line <code> section
on https://git-scm.com/docs/git-log which seems to have been caused by
commit 18fb7ffc ("pretty: respect color settings [...]", 2017-07-13).
Signed-off-by: Katrin Leinweber <katrin.leinweber@uni-konstanz.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 7 Feb 2019 19:36:28 +0000 (11:36 -0800)]
ci: clear and mark MAKEFLAGS exported just once
Clearing it once upfront, and turning all the assignment into
appending, would future-proof the code even more, to prevent
mistakes the previous one fixed from happening again.
Also, mark the variable exported just once at the beginning. There
is no point in marking it exported repeatedly.
SZEDER Gábor [Thu, 7 Feb 2019 18:37:36 +0000 (19:37 +0100)]
ci: make sure we build Git parallel
Commit 2c8921db2b (travis-ci: build with the right compiler,
2019-01-17) started to use MAKEFLAGS to specify which compiler to use
to build Git. A bit later, and in a different topic branch commit eaa62291ff (ci: inherit --jobs via MAKEFLAGS in run-build-and-tests,
2019-01-27) started to use MAKEFLAGS as well. Unfortunately, there is
a semantic conflict between these two commits: both of them set
MAKEFLAGS, and since the line adding CC from 2c8921db2b comes later in
'ci/lib.sh', it overwrites the number of parallel jobs added in eaa62291ff.
Consequently, since both commits have been merged all our CI jobs have
been building Git, building its documentation, and applying semantic
patches sequentially, making all build jobs a bit slower. Running
the test suite is unaffected, because the number of test jobs comes
from GIT_PROVE_OPTS.
Append to MAKEFLAGS when setting the compiler to use, to ensure that
the number of parallel jobs to use is preserved.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" over protocol v2 that needs to make a second connection
to backfill tags did not clear a variable that holds shallow
repository information correctly, leading to an access of freed
piece of memory.
* bc/fetch-pack-clear-alternate-shallow:
fetch-pack: clear alternate shallow in one more place
fetch-pack: clear alternate shallow when complete
Junio C Hamano [Thu, 7 Feb 2019 06:05:29 +0000 (22:05 -0800)]
Merge branch 'ma/doc-diff-usage-fix'
Running "Documentation/doc-diff x" from anywhere other than the
top-level of the working tree did not show the usage string
correctly, which has been fixed.
"git --work-tree=$there --git-dir=$here describe --dirty" did not
work correctly as it did not pay attention to the location of the
worktree specified by the user by mistake, which has been
corrected.
* ss/describe-dirty-in-the-right-directory:
t6120: test for describe with a bare repository
describe: setup working tree for --dirty
The way the OSX build jobs updates its build environment used the
"--quiet" option to "brew update" command, but it wasn't all that
quiet to be useful. The use of the option has been replaced with
an explicit redirection to the /dev/null (which incidentally would
have worked around a breakage by recent updates to homebrew, which
has fixed itself already).
* sg/travis-osx-brew-breakage-workaround:
travis-ci: make the OSX build jobs' 'brew update' more quiet
Junio C Hamano [Thu, 7 Feb 2019 06:05:27 +0000 (22:05 -0800)]
Merge branch 'sh/submodule-summary-abbrev-fix'
The "git submodule summary" subcommand showed shortened commit
object names by mechanically truncating them at 7-hexdigit, which
has been improved to let "rev-parse --short" scale the length of
the abbreviation with the size of the repository.
* sh/submodule-summary-abbrev-fix:
git-submodule.sh: shorten submodule SHA-1s using rev-parse
Junio C Hamano [Thu, 7 Feb 2019 06:05:26 +0000 (22:05 -0800)]
Merge branch 'js/vsts-ci'
Prepare to run test suite on Azure Pipeline.
* js/vsts-ci: (22 commits)
test-date: drop unused parameter to getnanos()
ci: parallelize testing on Windows
ci: speed up Windows phase
tests: optionally skip bin-wrappers/
t0061: workaround issues with --with-dashes and RUNTIME_PREFIX
tests: add t/helper/ to the PATH with --with-dashes
mingw: try to work around issues with the test cleanup
tests: include detailed trace logs with --write-junit-xml upon failure
tests: avoid calling Perl just to determine file sizes
README: add a build badge (status of the Azure Pipelines build)
mingw: be more generous when wrapping up the setitimer() emulation
ci: use git-sdk-64-minimal build artifact
ci: add a Windows job to the Azure Pipelines definition
Add a build definition for Azure DevOps
ci/lib.sh: add support for Azure Pipelines
tests: optionally write results as JUnit-style .xml
test-date: add a subcommand to measure times in shell scripts
ci: use a junction on Windows instead of a symlink
ci: inherit --jobs via MAKEFLAGS in run-build-and-tests
ci/lib.sh: encapsulate Travis-specific things
...
The documentation of "git commit-tree" said that the command
understands "--gpg-sign" in addition to "-S", but the command line
parser did not know about the longhand, which has been corrected.
* br/commit-tree-fully-spelled-gpg-sign-option:
commit-tree: add missing --gpg-sign flag
t7510: invoke git as part of &&-chain
Junio C Hamano [Thu, 7 Feb 2019 06:05:25 +0000 (22:05 -0800)]
Merge branch 'sg/travis-specific-cc'
The travis CI scripts have been corrected to build Git with the
compiler(s) of our choice.
* sg/travis-specific-cc:
travis-ci: build with the right compiler
travis-ci: switch to Xcode 10.1 macOS image
travis-ci: don't be '--quiet' when running the tests
.gitignore: ignore external debug symbols from GCC on macOS
Junio C Hamano [Thu, 7 Feb 2019 06:05:24 +0000 (22:05 -0800)]
Merge branch 'ds/push-sparse-tree-walk'
"git pack-objects" learned another algorithm to compute the set of
objects to send, that trades the resulting packfile off to save
traversal cost to favor small pushes.
Junio C Hamano [Thu, 7 Feb 2019 06:05:24 +0000 (22:05 -0800)]
Merge branch 'lt/date-human'
A new date format "--date=human" that morphs its output depending
on how far the time is from the current time has been introduced.
"--date=auto" can be used to use this new format when the output is
going to the pager or to the terminal and otherwise the default
format.
* lt/date-human:
Add `human` date format tests.
Add `human` format to test-tool
Add 'human' date format documentation
Replace the proposed 'auto' mode with 'auto:'
Add 'human' date format
Junio C Hamano [Thu, 7 Feb 2019 06:05:23 +0000 (22:05 -0800)]
Merge branch 'jk/unused-parameter-cleanup'
Code cleanup.
* jk/unused-parameter-cleanup:
convert: drop path parameter from actual conversion functions
convert: drop len parameter from conversion checks
config: drop unused parameter from maybe_remove_section()
show_date_relative(): drop unused "tz" parameter
column: drop unused "opts" parameter in item_length()
create_bundle(): drop unused "header" parameter
apply: drop unused "def" parameter from find_name_gnu()
match-trees: drop unused path parameter from score functions
Junio C Hamano [Thu, 7 Feb 2019 06:05:22 +0000 (22:05 -0800)]
Merge branch 'js/rebase-am'
Instead of going through "git-rebase--am" scriptlet to use the "am"
backend, the built-in version of "git rebase" learned to drive the
"am" backend directly.
* js/rebase-am:
built-in rebase: call `git am` directly
rebase: teach `reset_head()` to optionally skip the worktree
rebase: avoid double reflog entry when switching branches
rebase: move `reset_head()` into a better spot
Junio C Hamano [Thu, 7 Feb 2019 06:05:22 +0000 (22:05 -0800)]
Merge branch 'tt/bisect-in-c'
More code in "git bisect" has been rewritten in C.
* tt/bisect-in-c:
bisect--helper: `bisect_start` shell function partially in C
bisect--helper: `get_terms` & `bisect_terms` shell function in C
bisect--helper: `bisect_next_check` shell function in C
bisect--helper: `check_and_set_terms` shell function in C
wrapper: move is_empty_file() and rename it as is_empty_or_missing_file()
bisect--helper: `bisect_write` shell function in C
bisect--helper: `bisect_reset` shell function in C
Junio C Hamano [Thu, 7 Feb 2019 06:05:21 +0000 (22:05 -0800)]
Merge branch 'tb/utf-16-le-with-explicit-bom'
A new encoding UTF-16LE-BOM has been invented to force encoding to
UTF-16 with BOM in little endian byte order, which cannot be directly
generated by using iconv.
* tb/utf-16-le-with-explicit-bom:
Support working-tree-encoding "UTF-16LE-BOM"
Junio C Hamano [Thu, 7 Feb 2019 06:05:20 +0000 (22:05 -0800)]
Merge branch 'en/rebase-merge-on-sequencer'
"git rebase --merge" as been reimplemented by reusing the internal
machinery used for "git rebase -i".
* en/rebase-merge-on-sequencer:
rebase: implement --merge via the interactive machinery
rebase: define linearization ordering and enforce it
git-legacy-rebase: simplify unnecessary triply-nested if
git-rebase, sequencer: extend --quiet option for the interactive machinery
am, rebase--merge: do not overlook --skip'ed commits with post-rewrite
t5407: add a test demonstrating how interactive handles --skip differently
rebase: fix incompatible options error message
rebase: make builtin and legacy script error messages the same
Commit 9e5da3d055 (add: use separate ADD_CACHE_RENORMALIZE flag,
2019-01-17) switched out using HASH_RENORMALIZE in our flags field for a
new ADD_CACHE_RENORMALIZE flag. However, it forgot to convert one of the
checks for HASH_RENORMALIZE into the new flag, which totally broke "git
add --renormalize".
To make matters even more confusing, the resulting code would racily
pass the tests! The forgotten check was responsible for defeating the
up-to-date check of the index entry. That meant that "git add
--renormalize" would refuse to renormalize things that appeared
stat-clean. But most of the time the test commands run fast enough that
the file mtime is the same as the index mtime. And thus we err on the
conservative side and re-hash the file, which is what "--renormalize"
would have wanted.
But if you're unlucky and cross that one-second boundary between writing
the file and writing the index (which is more likely to happen on a slow
or heavily-loaded system), then the file appears stat-clean. And
"--renormalize" would effectively do nothing.
The fix is straightforward: convert this check to use the right flag.
Noticed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch-pack: clear alternate shallow in one more place
The previous one did not clear the variable in one codepath,
but we should aim to be complete.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
[jc: made a reroll into incremental, as the previous one already is
in the next branch] Signed-off-by: Junio C Hamano <gitster@pobox.com>
Luke Diamand [Wed, 6 Feb 2019 15:11:53 +0000 (15:11 +0000)]
git-p4: remove ticket expiry test
The git-p4 login ticket expiry test causes unreliable test
runs. Since the handling of ticket expiry in git-p4 is far
from polished anyway, let's remove it for now.
A better way to actually run the test is to create a python
"fake" version of "p4" which returns whatever expiry results
the test requires.
Ideally git-p4 would look at the expiry time before starting
any long operations, and cleanup gracefully if there is not
enough time left. But that's quite hard to do.
Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 0f086e6dca (checkout: print something when checking out paths -
2018-11-13), this command reports how many paths have been updated
from what source (either from a tree, or from the index). I forget
that there's a third source: when -m is used, the merge conflict is
re-created (granted, also from the index, but it's not a straight copy
from the index).
Count and report unmerged paths separately. There's a bit more update
to avoid reporting:
Recreated X merge conflicts
Updated 0 paths from the index
The second line is unnecessary. Though if there's no conflict
recreation, we still report
Updated 0 paths from the index
to make it clear we're not really doing anything.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0f086e6dca [1] counts the number of files updated by "git
checkout -- <paths>" command and prints it. Later on 536ec1839d [2]
adds the ability to remove files in "git checkout -- <paths>". This is
still an update on worktree and should be reported to the user.
To prepare for such an update since that commit is on track to
'master' now, the messages are rephrased to avoid "checked out" which
does not imply file deletion.
[1] 0f086e6dca (checkout: print something when checking out paths -
2018-11-13)
[2] 536ec1839d (entry: support CE_WT_REMOVE flag in checkout_entry -
2018-12-20)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Josh Steadmon [Wed, 6 Feb 2019 19:19:10 +0000 (14:19 -0500)]
t5551: test server-side ERR packet
When a smart HTTP server sends an error message via pkt-line, we detect
the error due to using PACKET_READ_DIE_ON_ERR_PACKET. This case was
added by 2d103c31c2 (pack-protocol.txt: accept error packets in any
context, 2018-12-29), but not covered by tests.
Signed-off-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 6 Feb 2019 19:18:58 +0000 (14:18 -0500)]
remote-curl: tighten "version 2" check for smart-http
In a v2 smart-http conversation, the server should reply to our initial
request with a pkt-line saying "version 2". We check that with
starts_with(), but really that should be the only thing in that packet.
A response of "version 20" should not match.
Let's tighten this check to use strcmp(). Note that we don't need to
worry about a trailing newline here, because the ptk-line code will have
chomped it for us already.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 6 Feb 2019 19:18:48 +0000 (14:18 -0500)]
remote-curl: refactor smart-http discovery
After making initial contact with an http server, we have to decide if
the server supports smart-http, and if so, which version. Our rules are
a bit inconsistent:
1. For v0, we require that the content-type indicates a smart-http
response. We also require the response to look vaguely like a
pkt-line starting with "#". If one of those does not match, we fall
back to dumb-http.
But according to our http protocol spec[1]:
Dumb servers MUST NOT return a return type starting with
`application/x-git-`.
If we see the expected content-type, we should consider it
smart-http. At that point we can parse the pkt-line for real, and
complain if it is not syntactically valid.
2. For v2, we do not actually check the content-type. Our v2 protocol
spec says[2]:
When using the http:// or https:// transport a client makes a
"smart" info/refs request as described in `http-protocol.txt`[...]
and the http spec is clear that for a smart-http response[3]:
The Content-Type MUST be `application/x-$servicename-advertisement`.
So it is required according to the spec.
These inconsistencies were easy to miss because of the way the original
code was written as an inline conditional. Let's pull it out into its
own function for readability, and improve a few things:
- we now predicate the smart/dumb decision entirely on the presence of
the correct content-type
- we do a real pkt-line parse before deciding how to proceed (and die
if it isn't valid)
- use skip_prefix() for comparing service strings, instead of
constructing expected output in a strbuf; this avoids dealing with
memory cleanup
Note that this _is_ tightening what the client will allow. It's all
according to the spec, but it's possible that other implementations
might violate these. However, violating these particular rules seems
like an odd choice for a server to make.
[1] Documentation/technical/http-protocol.txt, l. 166-167
[2] Documentation/technical/protocol-v2.txt, l. 63-64
[3] Documentation/technical/http-protocol.txt, l. 247
Helped-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 6 Feb 2019 19:35:52 +0000 (14:35 -0500)]
test-date: drop unused parameter to getnanos()
The getnanos() helper always gets the current time from our
getnanotime() facility. The caller cannot override it via TEST_DATE_NOW,
and hence we simply ignore the "now" parameter to the function. Let's
remove it, as it may mislead callers into thinking it does something.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Revert "rebase: introduce a shortcut for --reschedule-failed-exec"
This patch was contributed only as a tentative "we could introduce a
convenient short option if we do not want to change the default behavior
in the long run" patch, opening the discussion whether other people
agree with deprecating the current behavior in favor of the rescheduling
behavior.
But the consensus on the Git mailing list was that it would make sense
to show a warning in the near future, and flip the default
rebase.rescheduleFailedExec to reschedule failed `exec` commands by
default. See e.g.
<CAGZ79kZL5CRqCDRb6B-EedUm8Z_i4JuSF2=UtwwdRXMitrrOBw@mail.gmail.com>
So let's back out that patch that added the `-y` short option that we
agreed was not necessary or desirable.
Junio C Hamano [Tue, 5 Feb 2019 22:26:19 +0000 (14:26 -0800)]
Merge branch 'sg/object-as-type-commit-graph-fix'
The commit-graph facility did not work when in-core objects that
are promoted from unknown type to commit (e.g. a commit that is
accessed via a tag that refers to it) were involved, which has been
corrected.
* sg/object-as-type-commit-graph-fix:
object_as_type: initialize commit-graph-related fields of 'struct commit'
Junio C Hamano [Tue, 5 Feb 2019 22:26:17 +0000 (14:26 -0800)]
Merge branch 'pw/no-editor-in-rebase-i-implicit'
When GIT_SEQUENCE_EDITOR is set, the command was incorrectly
started when modes of "git rebase" that implicitly uses the
machinery for the interactive rebase are run, which has been
corrected.
* pw/no-editor-in-rebase-i-implicit:
implicit interactive rebase: don't run sequence editor
Junio C Hamano [Tue, 5 Feb 2019 22:26:17 +0000 (14:26 -0800)]
Merge branch 'jk/diff-cc-stat-fixes'
"git diff --color-moved --cc --stat -p" did not work well due to
funny interaction between a bug in color-moved and the rest, which
has been fixed.
* jk/diff-cc-stat-fixes:
combine-diff: treat --dirstat like --stat
combine-diff: treat --summary like --stat
combine-diff: treat --shortstat like --stat
combine-diff: factor out stat-format mask
diff: clear emitted_symbols flag after use
t4006: resurrect commented-out tests
Junio C Hamano [Tue, 5 Feb 2019 22:26:17 +0000 (14:26 -0800)]
Merge branch 'bp/checkout-new-branch-optim'
"git checkout -b <new> [HEAD]" to create a new branch from the
current commit and check it out ought to be a no-op in the index
and the working tree in normal cases, but there are corner cases
that do require updates to the index and the working tree. Running
it immediately after "git clone --no-checkout" is one of these
cases that an earlier optimization kicked in incorrectly, which has
been fixed.
* bp/checkout-new-branch-optim:
checkout: fix regression in checkout -b on intitial checkout
checkout: add test demonstrating regression with checkout -b on initial commit
Junio C Hamano [Tue, 5 Feb 2019 22:26:16 +0000 (14:26 -0800)]
Merge branch 'jk/attr-macro-fix'
Asking "git check-attr" about a macro (e.g. "binary") on a specific
path did not work correctly, even though "git check-attr -a" listed
such a macro correctly. This has been corrected.
* jk/attr-macro-fix:
attr: do not mark queried macros as unset
Junio C Hamano [Tue, 5 Feb 2019 22:26:15 +0000 (14:26 -0800)]
Merge branch 'js/abspath-part-inside-repo'
On a case-insensitive filesystem, we failed to compare the part of
the path that is above the worktree directory in an absolute
pathname, which has been corrected.
Junio C Hamano [Tue, 5 Feb 2019 22:26:10 +0000 (14:26 -0800)]
Merge branch 'ld/git-p4-shelve-update-fix'
"git p4" failed to update a shelved change when there were moved
files, which has been corrected.
* ld/git-p4-shelve-update-fix:
git-p4: handle update of moved/copied files when updating a shelve
git-p4: add failing test for shelved CL update involving move/copy
Update the protocol message specification to allow only the limited
use of scaled quantities. This is ensure potential compatibility
issues will not go out of hand.
* js/filter-options-should-use-plain-int:
filter-options: expand scaled numbers
tree:<depth>: skip some trees even when collecting omits
list-objects-filter: teach tree:# how to handle >0
Junio C Hamano [Tue, 5 Feb 2019 22:26:09 +0000 (14:26 -0800)]
Merge branch 'sb/more-repo-in-api'
The in-core repository instances are passed through more codepaths.
* sb/more-repo-in-api: (23 commits)
t/helper/test-repository: celebrate independence from the_repository
path.h: make REPO_GIT_PATH_FUNC repository agnostic
commit: prepare free_commit_buffer and release_commit_memory for any repo
commit-graph: convert remaining functions to handle any repo
submodule: don't add submodule as odb for push
submodule: use submodule repos for object lookup
pretty: prepare format_commit_message to handle arbitrary repositories
commit: prepare logmsg_reencode to handle arbitrary repositories
commit: prepare repo_unuse_commit_buffer to handle any repo
commit: prepare get_commit_buffer to handle any repo
commit-reach: prepare in_merge_bases[_many] to handle any repo
commit-reach: prepare get_merge_bases to handle any repo
commit-reach.c: allow get_merge_bases_many_0 to handle any repo
commit-reach.c: allow remove_redundant to handle any repo
commit-reach.c: allow merge_bases_many to handle any repo
commit-reach.c: allow paint_down_to_common to handle any repo
commit: allow parse_commit* to handle any repo
object: parse_object to honor its repository argument
object-store: prepare has_{sha1, object}_file to handle any repo
object-store: prepare read_object_file to deal with any repo
...
Ramsay Jones [Tue, 5 Feb 2019 02:27:48 +0000 (02:27 +0000)]
Makefile: improve SPARSE_FLAGS customisation
In order to enable greater user customisation of the SPARSE_FLAGS
variable, we introduce a new SP_EXTRA_FLAGS variable to use for
target specific settings. Without using the new variable, setting
the SPARSE_FLAGS on the 'make' command-line would also override the
value set by the target-specific rules in the Makefile (effectively
making them useless). Also, this enables the SP_EXTRA_FLAGS to be
used in the future for any other internal customisations, such as
for some platform specific values.
In addition, we initialise the SPARSE_FLAGS to the default (empty)
value using a conditional assignment (?=). This allows SPARSE_FLAGS
to be set from the environment as well as from the command-line.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
An upcoming commit will change the semantics of the SPARSE_FLAGS
variable from an internal to a user only customisation variable.
The MinGW configuration section contains an obsolete setting for
this variable which was used (some years ago) to cater to an error
in the Win32 system header files. Since 'sparse' does not currently
support the MinGW platform, nobody on that platform can be relying
on this setting today. Remove this use of the SPARSE_FLAGS variable.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-submodule.sh: shorten submodule SHA-1s using rev-parse
Until now, `git submodule summary` was always emitting 7-character
SHA-1s that have a higher chance of being ambiguous for larger
repositories. Use `git rev-parse --short` instead, which will
determine suitable short SHA-1 lengths.
When a submodule hasn't been initialized with "submodule init" or
not cloned, `git rev-parse` would not work in it yet; as a fallback,
use the original method of cutting at 7 hexdigits.
Signed-off-by: Sven van Haastregt <svenvh@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we write an alternate shallow file in update_shallow, we write it
into the lock file. The string stored in alternate_shallow_file is
copied from the lock file path, but it is freed the moment that the lock
file is closed, since we call strbuf_release to free that path.
This used to work, since we did not invoke git index-pack more than
once, but now that we do, we reuse the freed memory. Ensure we reset the
value to NULL to avoid using freed memory. git index-pack will read the
repository's shallow file, which will have been updated with the correct
information.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
