Shawn Pearce [Wed, 23 Aug 2006 06:49:00 +0000 (02:49 -0400)]
Convert memcpy(a,b,20) to hashcpy(a,b).
This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.
A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*. This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.
[jc: Splitted the patch to "master" part, to be followed by a
patch for merge-recursive.c which is not in "master" yet.
Fixed the cast in the latter hunk to combine-diff.c which was
wrong in the original.
Also converted ones left-over in combine-diff.c, diff-lib.c and
upload-pack.c ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Pierre Habouzit [Wed, 23 Aug 2006 09:17:55 +0000 (11:17 +0200)]
Fix a comparison bug in diff-delta.c
(1 << i) < hspace is compared in the `int` space rather that in the
unsigned one. the result will be wrong if hspace is between 0x40000000
and 0x80000000.
Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-send-email: Don't set author_not_sender from Cc: lines
When an mbox-style patch contains a Cc: line in the header,
git-send-email will check the address against the sender specified
on the command line. If they don't match, sender_not_author will
be set to the address obtained from the Cc line.
When this happens, git-send-email inserts a From: line at the
beginning of the message body with the address obtained from the
Cc line in the header, and the sender might be accused of forging
patch authors.
This patch fixes this by only updating sender_not_author when
processing From: lines, not when processing Cc: lines.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn Pearce [Mon, 21 Aug 2006 07:10:02 +0000 (03:10 -0400)]
Verify we know how to read a pack before trying to using it.
If the pack format were to ever change or be extended in the future
there is no assurance that just because the pack file lives in
objects/pack and doesn't end in .idx that we can read and decompress
its contents properly.
If we encounter what we think is a pack file and it isn't or we don't
recognize its version then die and suggest to the user that they
upgrade to a newer version of GIT which can handle that pack file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Rene Scharfe [Mon, 21 Aug 2006 18:43:43 +0000 (20:43 +0200)]
Add write_or_die(), a helper function
The little helper write_or_die() won't come back with bad news about
full disks or broken pipes. It either succeeds or terminates the
program, making additional error handling unnecessary.
This patch adds the new function and uses it to replace two similar
ones (the one in tar-tree originally has been copied from cat-file
btw.). I chose to add the fd parameter which both lacked to make
write_or_die() just as flexible as write() and thus suitable for
lib-ification.
There is a regression: error messages emitted by this function don't
show the program name, while the replaced two functions did. That's
acceptable, I think; a lot of other functions do the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
Rene Scharfe [Mon, 21 Aug 2006 18:11:48 +0000 (20:11 +0200)]
Axe the last ent
In the name of Standardization, this cleanses the last usage string of
mystical creatures. But they still dwell deep within the source and in
some debug messages, it is said.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
Ville Skyttä [Wed, 16 Aug 2006 20:12:26 +0000 (23:12 +0300)]
Be nicer if git executable is not installed
This patch avoids problems if vc-git.el is installed and activated, but
the git executable is not available, for example
http://list-archive.xemacs.org/xemacs-beta/200608/msg00062.html
Signed-off-by: Ville Skyttä <scop@xemacs.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 16 Aug 2006 21:00:34 +0000 (14:00 -0700)]
Merge branch 'jc/racy'
* jc/racy:
Remove the "delay writing to avoid runtime penalty of racy-git avoidance"
Add check program "git-check-racy"
Documentation/technical/racy-git.txt
avoid nanosleep(2)
Jakub Narebski [Wed, 16 Aug 2006 12:50:34 +0000 (14:50 +0200)]
gitweb: Add support for per project git URLs
It is now possible for project to have individual clone/fetch URLs.
They are provided in new file 'cloneurl' added below project's
$GIT_DIR directory.
If there is no cloneurl file, concatenation of git base URLs with
project name is used.
This is merge of Jakub Narebski and David Rientjes
gitweb: Show project's git URL on summary page
with Aneesh Kumar
gitweb: Add support for cloneurl.
gitweb: Support multiple clone urls
patches.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Martin Waitz [Tue, 15 Aug 2006 22:24:30 +0000 (00:24 +0200)]
gitweb: consolidate action URL generation.
Use the href() function instead of string concatenation to generate
most URLs to our own CGI.
This is a work in progress, not everything has been converted yet.
Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Martin Waitz [Tue, 15 Aug 2006 22:23:50 +0000 (00:23 +0200)]
gitweb: provide function to format the URL for an action link.
Provide a new function which can be used to generate an URL for the CGI.
This makes it possible to consolidate the URL generation in order to make
it easier to change the encoding of actions into URLs.
Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 16 Aug 2006 04:15:32 +0000 (21:15 -0700)]
Merge branch 'maint'
* maint:
finish_connect(): thinkofix
git-mv: succeed even if source is a prefix of destination
Solaris does not support C99 format strings before version 10
Junio C Hamano [Tue, 15 Aug 2006 23:28:08 +0000 (16:28 -0700)]
finish_connect(): thinkofix
All but one callers have ignore the return value from this
function, but the only caller, builtin-tar-tree.c::remote_tar(),
assumed it returns non-zero on failure and zero on success. The
implementation however was returning either the waited pid
(which must be the same as its input) or -1 (an error).
Fix this thinko, while getting rid of an assignment of return
value from waitpid() into a variable of type int.
Junio C Hamano [Tue, 15 Aug 2006 10:39:47 +0000 (03:39 -0700)]
avoid nanosleep(2)
On Solaris nanosleep(2) is not available in libc; you need to
link with -lrt to get it.
The purpose of the loop is to wait until the next filesystem
timestamp granularity, and the code uses subsecond sleep in the
hope that it can shorten the delay to 0.5 seconds on average
instead of a full second. It is probably not worth depending on
an extra library for this.
We might want to yank out the whole "racy-git avoidance is
costly later at runtime, so let's delay writing the index out"
codepath later, but that is a separate issue and needs some
testing on large trees to figure it out. After playing with the
kernel tree, I have a feeling that the whole thing may not be
worth it.
Junio C Hamano [Tue, 15 Aug 2006 09:23:06 +0000 (02:23 -0700)]
git-apply --binary: clean up and prepare for --reverse
This cleans up the implementation of "git-apply --binary", and
implements reverse application of binary patches (when git-diff
is converted to emit reversible binary patches).
Earlier, the types of encoding (either deflated literal or
deflated delta) were stored in is_binary field in struct patch,
which meant that we cannot store more than one fragment that
differ in the encoding for a patch. This moves the information
to a field in struct fragment that is otherwise unused for
binary patches, and makes it possible to hang two (or more, but
two is enough) hunks for a binary patch.
The original "binary patch" output from git-diff is internally
parsed into an "is_binary" patch with one fragment. Upcoming
reversible binary patch output will have two fragments, the
first one being the forward patch and the second one the reverse
patch.
Dennis Stosberg [Tue, 15 Aug 2006 09:01:25 +0000 (11:01 +0200)]
Look for sockaddr_storage in sys/socket.h
On Solaris and the BSDs the definition of "struct sockaddr_storage"
is not available from "netinet/in.h". On Solaris "sys/socket.h" is
enough, at least OpenBSD needs "sys/types.h", too.
Using "sys/types.h" and "sys/socket.h" seems to be a more portable
way.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Yasushi SHOJI [Mon, 14 Aug 2006 22:50:49 +0000 (07:50 +0900)]
gitweb: configurable home link string
I've always found difficult to figure out git URL for clone from
gitweb URL because git:// and http:// are different on many site
including kernel.org.
I've found this enhancement at http://dev.laptop.org/git when I was on
git channel, and thought that it'd be nice if all public gitweb site
show it's git URL on its page.
This patch allow us to change the home link string. The current
default is "projects" as we all see on gitweb now.
ie. kernel.org might set this variable to "git://git.kernel.org/pub/scm/"
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Mon, 14 Aug 2006 00:18:33 +0000 (02:18 +0200)]
gitweb: Separate printing difftree in git_commit into git_difftree_body
Separate printing difftree in git_commit into separate
git_difftree_body subroutine. Add support for "C" (copied) status. For
"M" and "C" add parameter 'fp' (filename parent) to the "diff" link;
currently not supported by git_blobdiff ("blobdiff" action).
Reindented, realigned, added comments.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Mon, 14 Aug 2006 00:14:20 +0000 (02:14 +0200)]
gitweb: Change appereance of marker of refs pointing to given object
Change git_get_references to include type of ref in the %refs value, which
means putting everything after 'refs/' as a ref name, not only last
part of the name. Instead of separating refs pointing to the same
object by " / " separator, use anonymous array reference to store all
refs pointing to given object.
Use 'git-ls-remote .' if $projectroot/$project/info/refs does not
exist. (Perhaps it should be used always.)
Refs are now in separate span elements. Class is dependent on the ref
type: currently known classes are 'tag', 'head', 'remote', and 'ref'
(last one for HEAD and other refs in the main directory). There is
encompassing span element of class refs, just in case of unknown ref
type.
This might be considered cleaner separating of git_get_references into
filling %refs hash only, and not taking part in formatting ref marker.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Mon, 14 Aug 2006 00:09:08 +0000 (02:09 +0200)]
gitweb: Separate main part of git_history into git_history_body
Separates main part of git_history into git_history_body subroutine,
and makes output more similar to git_shortlog. Adds "diff to current"
link only for history of regular file (blob).
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Mon, 14 Aug 2006 00:07:00 +0000 (02:07 +0200)]
gitweb: Separate ref parsing in git_get_refs_list into parse_ref
Note that for each ref there are usually two calls to git subroutines:
first to get the type of ref, second to parse ref if ref is of commit
or tag type.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Mon, 14 Aug 2006 00:05:47 +0000 (02:05 +0200)]
gitweb: Great subroutines renaming
Rename some of subroutines to better reflect what they do.
Some renames were not performed because subroutine name
reflects hash key.
Subroutines name guideline:
* git_ prefix for subroutines related to git commands,
git repository, or to gitweb actions
* git_get_ prefix for inner subroutines calling git command
or reading some file in the repository and returning some output
* parse_ prefix for subroutines parsing some text (or reading and
parsing some text) into hash or list
* format_ prefix for subroutines formatting, post-processing
or generating some HTML/text fragment
* _get_ infix for subroutines which return result
* _print_ infix for subroutines which print fragment of output
* _body suffix for subroutines which outputs main part (body)
of related action (usually table)
* _nav suffix for subroutines related to navigation bars
* _div suffix for subroutines returning or printing div element
* subroutine names should not be based on how the result is obtained,
as this might change easily
Franck Bui-Huu [Sun, 13 Aug 2006 18:30:27 +0000 (11:30 -0700)]
Add a newline before appending "Signed-off-by: " line
Whef the last line of the commit log message does not end with
"^[-A-Za-z]+: [^@]+@", append a newline after it to separate
the body of the commit log message from the run of sign-off and
ack lines. e.g. "Signed-off-by: A U Thor <au.thor@example.com>" or
"Acked-by: Me <myself@example.org>".
Luben Tuikov [Sun, 13 Aug 2006 08:41:22 +0000 (01:41 -0700)]
sample commit-msg hook: no silent exit on duplicate Signed-off-by lines
git-commit would silently exit if duplicate Signed-off-by
lines were found. Users of git-commit would not know it,
unless they checked '$?'. This patch makes git-commit
actually print out a message that nothing was commited
since duplicate Signed-off-lines were found.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 12 Aug 2006 08:03:47 +0000 (01:03 -0700)]
Better error message when we are unable to lock the index file
Most of the callers except the one in refs.c use the function to
update the index file. Among the index writers, everybody
except write-tree dies if they cannot open it for writing.
This gives the function an extra argument, to tell it to die
when it cannot create a new file as the lockfile.
The only caller that does not have to die is write-tree, because
updating the index for the cache-tree part is optional and not
being able to do so does not affect the correctness. I think we
do not have to be so careful and make the failure into die() the
same way as other callers, but that would be a different patch.
Junio C Hamano [Sat, 12 Aug 2006 23:16:47 +0000 (16:16 -0700)]
git-am: give better diagnostics when the patch does not apply during --3way
If the user tries to apply a patch that was hand-edited in such
a way that it does not apply to the original file recorded on
its "index" line anymore, we did detect the situation but did
not issue an error message that is specific enough.
Eric Wong [Sat, 12 Aug 2006 06:21:41 +0000 (23:21 -0700)]
git-svn: split the path from the url correctly with limited perms
This version of the splitter (that only affects SVN:: library
users) works when one only has limited read-permissions to
the repository they're fetching from.
Updated from the original patch to workaround some SVN bug
somewhere, which only seems to happen against file://
repositories... Here's the diff against the original patch I
submitted:
@@ -1159,8 +1159,8 @@ sub repo_path_split {
}
if ($_use_lib) {
- $SVN = libsvn_connect($full_url);
- my $url = $SVN->get_repos_root;
+ my $tmp = libsvn_connect($full_url);
+ my $url = $tmp->get_repos_root;
$full_url =~ s#^\Q$url\E/*##;
push @repo_path_split_cache, qr/^(\Q$url\E)/;
return ($url, $full_url);
Somehow connecting to a repository with the full url makes the
returned SVN::Ra object act strangely and break things, so now
we just drop the SVN::Ra object that we made our initial
connection with.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 11 Aug 2006 07:44:42 +0000 (00:44 -0700)]
git-grep: show pathnames relative to the current directory
By default, the command shows pathnames relative to the current
directory. Use --full-name (the same flag to do so in ls-files)
if you want to see the full pathname relative to the project root.
This makes it very pleasant to run in Emacs compilation (or
"grep-find") buffer.
Junio C Hamano [Sat, 12 Aug 2006 01:47:50 +0000 (18:47 -0700)]
git-sh-setup: do not use repo-config to test the git directory
Since repo-config does not fail in non-git directory, it is not
a good command to use to test the git-ness nor validate the
repository revision of $GIT_DIR.
Original patch by Robert Shearman but with minor fixes.
Eric Wong [Fri, 11 Aug 2006 18:11:29 +0000 (11:11 -0700)]
git-svn: bugfix: allow SVN:: lib users to track the root of the repository
I'm not sure if anybody has hit this (besides me), but this
fixes the problem where I ran into while attempting to import a
small repo at the root level: I ended up with all the commits, but
with no file/tree changes at all throughout the entire history.
Also, fix a warning if the commit message is not defined for revision 0.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Fri, 11 Aug 2006 11:34:07 +0000 (04:34 -0700)]
git-svn: correctly kill keyword expansion without munging EOLs
This bugfix applies to users of the svn command-line client only.
We no longer muck with newlines when killing keyword expansion.
This tended to generate unintended diffs in commits because svn
revert -R would destroy the manual EOL changes we were doing. Of
course, we didn't need the EOL munging in the first place, as
svn seems to do it for us even in the text-base files.
Now we set the mtime and atime the files changed by keyword
expansion killing to avoid triggering a change on svn revert,
which svn still seems to want to do.
Thanks to Seth Falcon for reporting this bug.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Rene Scharfe [Fri, 11 Aug 2006 12:01:45 +0000 (14:01 +0200)]
drop length argument of has_extension
As Fredrik points out the current interface of has_extension() is
potentially confusing. Its parameters include both a nul-terminated
string and a length-limited string.
This patch drops the length argument, requiring two nul-terminated
strings; all callsites are updated. I checked that all of them indeed
provide nul-terminated strings. Filenames need to be nul-terminated
anyway if they are to be passed to open() etc. The performance penalty
of the additional strlen() is negligible compared to the system calls
which inevitably surround has_extension() calls.
Additionally, change has_extension() to use size_t inside instead of
int, as that is the exact type strlen() returns and memcmp() expects.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
Add the --color-words option to the diff options family
With this option, the changed words are shown inline. For example,
if a file containing "This is foo" is changed to "This is bar", the diff
will now show "This is " in plain text, "foo" in red, and "bar" in green.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
projects / thirdparty / git.git / log
