Jeff King [Sun, 5 Oct 2008 21:43:21 +0000 (17:43 -0400)]
diff: unify external diff and funcname parsing code
Both sets of code assume that one specifies a diff profile
as a gitattribute via the "diff=foo" attribute. They then
pull information about that profile from the config as
diff.foo.*.
The code for each is currently completely separate from the
other, which has several disadvantages:
- there is duplication as we maintain code to create and
search the separate lists of external drivers and
funcname patterns
- it is difficult to add new profile options, since it is
unclear where they should go
- the code is difficult to follow, as we rely on the
"check if this file is binary" code to find the funcname
pattern as a side effect. This is the first step in
refactoring the binary-checking code.
This patch factors out these diff profiles into "userdiff"
drivers. A file with "diff=foo" uses the "foo" driver, which
is specified by a single struct.
Note that one major difference between the two pieces of
code is that the funcname patterns are always loaded,
whereas external drivers are loaded only for the "git diff"
porcelain; the new code takes care to retain that situation.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Junio C Hamano [Sat, 18 Oct 2008 14:07:23 +0000 (07:07 -0700)]
Merge branch 'pb/commit-where'
* pb/commit-where:
tutorial: update output of git commit
reformat informational commit message
git commit: Reformat output somewhat
builtin-commit.c: show on which branch a commit was added
Junio C Hamano [Fri, 17 Oct 2008 08:52:32 +0000 (01:52 -0700)]
Merge branch 'maint'
* maint:
t1301-shared-repo.sh: don't let a default ACL interfere with the test
git-check-attr(1): add output and example sections
xdiff-interface.c: strip newline (and cr) from line before pattern matching
t4018-diff-funcname: demonstrate end of line funcname matching flaw
t4018-diff-funcname: rework negated last expression test
Typo "does not exists" when git remote update remote.
remote.c: correct the check for a leading '/' in a remote name
Add testcase to ensure merging an early part of a branch is done properly
Matt McCutchen [Fri, 17 Oct 2008 02:32:14 +0000 (22:32 -0400)]
t1301-shared-repo.sh: don't let a default ACL interfere with the test
This test creates files with several different umasks and expects their
permissions to be initialized according to the umask, so a default ACL on the
trash directory (which overrides the umask for files created in that directory)
causes the test to fail. To avoid that, remove the default ACL if possible with
setfacl(1).
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Wed, 1 Oct 2008 19:28:26 +0000 (14:28 -0500)]
xdiff-interface.c: strip newline (and cr) from line before pattern matching
POSIX doth sayeth:
"In the regular expression processing described in IEEE Std 1003.1-2001,
the <newline> is regarded as an ordinary character and both a period and
a non-matching list can match one. ... Those utilities (like grep) that
do not allow <newline>s to match are responsible for eliminating any
<newline> from strings before matching against the RE."
Thus far git has not been removing the trailing newline from strings matched
against regular expression patterns. This has the effect that (quoting
Jonathan del Strother) "... a line containing just 'FUNCNAME' (terminated by
a newline) will be matched by the pattern '^(FUNCNAME.$)' but not
'^(FUNCNAME$)'", and more simply not '^FUNCNAME$'.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Brandon Casey [Thu, 16 Oct 2008 00:58:50 +0000 (19:58 -0500)]
t4018-diff-funcname: demonstrate end of line funcname matching flaw
Since the newline is not removed from lines before pattern matching, a
pattern cannot match to the end of the line using the '$' operator without
using an additional operator which will indirectly match the '\n' character.
Introduce a test which should pass, but which does not due to this flaw.
Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 16 Oct 2008 00:58:49 +0000 (19:58 -0500)]
t4018-diff-funcname: rework negated last expression test
This test used the non-zero exit status of 'git diff' to indicate that a
negated funcname pattern, when placed last, was correctly rejected.
The problem with this is that 'git diff' always returns non-zero if it
finds differences in the files it is comparing, and the files must
contain differences in order to trigger the funcname pattern codepath.
Instead of checking for non-zero exit status, make sure the expected
error message is printed.
Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Tue, 14 Oct 2008 20:30:21 +0000 (15:30 -0500)]
remote.c: correct the check for a leading '/' in a remote name
This test is supposed to disallow remote entries in the config file of the
form:
[remote "/foobar"]
...
The leading slash in '/foobar' is not acceptable.
Instead it was incorrectly testing that the subkey had no leading '/', which
had no effect since the subkey pointer was made to point at a '.' in the
preceding lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matt McCutchen [Sat, 11 Oct 2008 01:56:15 +0000 (21:56 -0400)]
"git diff <tree>{3,}": do not reverse order of arguments
According to the message of commit 0fe7c1de16f71312e6adac4b85bddf0d62a47168,
"git diff" with three or more trees expects the merged tree first followed by
the parents, in order. However, this command reversed the order of its
arguments, resulting in confusing diffs. A comment /* Again, the revs are all
reverse */ suggested there was a reason for this, but I can't figure out the
reason, so I removed the reversal of the arguments. Test case included.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Brandon Casey [Thu, 9 Oct 2008 19:12:12 +0000 (14:12 -0500)]
Replace calls to strbuf_init(&foo, 0) with STRBUF_INIT initializer
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Dmitry Potapov [Sat, 11 Oct 2008 16:39:37 +0000 (20:39 +0400)]
print an error message for invalid path
If verification of path failed, it is always better to print an
error message saying this than relying on the caller function to
print a meaningful error message (especially when the callee already
prints error message for another situation).
Because the callers of add_index_entry_with_check() did not print
any error message, it resulted that the user would not notice the
problem when checkout of an invalid path failed.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Brandon Casey [Sat, 11 Oct 2008 00:21:34 +0000 (19:21 -0500)]
t9001: use older Getopt::Long boolean prefix '--no' rather than '--no-'
Since dbf5e1e9, the '--no-validate' option is a Getopt::Long boolean
option. The '--no-' prefix (as in --no-validate) for boolean options
is not supported in Getopt::Long version 2.32 which was released with
Perl 5.8.0. This version only supports '--no' as in '--novalidate'.
More recent versions of Getopt::Long, such as version 2.34, support
either prefix. So use the older form in the tests.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff King [Sun, 12 Oct 2008 04:06:11 +0000 (00:06 -0400)]
git apply --directory broken for new files
We carefully verify that the input to git-apply is sane,
including cross-checking that the filenames we see in "+++"
headers match what was provided on the command line of "diff
--git". When --directory is used, however, we ended up
comparing the unadorned name to one with the prepended root,
causing us to complain about a mismatch.
We simply need to prepend the root directory, if any, when
pulling the name out of the git header.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
rebase -i: do not fail when there is no commit to cherry-pick
In case there is no commit to apply (for example because you rebase to
upstream and all your local patches have been applied there), do not
fail. The non-interactive rebase already behaves that way.
Do this by introducing a new command, "noop", which is substituted for
an empty commit list, so that deleting the commit list can still abort
as before.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Nicolas Pitre [Fri, 10 Oct 2008 02:08:51 +0000 (22:08 -0400)]
fix pread()'s short read in index-pack
Since v1.6.0.2~13^2~ the completion of a thin pack uses sha1write() for
its ability to compute a SHA1 on the written data. This also provides
data buffering which, along with commit 92392b4a45, will confuse pread()
whenever an appended object is 1) freed due to memory pressure because
of the depth-first delta processing, and 2) needed again because it has
many delta children, and 3) its data is still buffered by sha1write().
Let's fix the issue by simply forcing cached data out when such an
object is written so it can be pread()'d at leisure.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Thu, 9 Oct 2008 17:52:04 +0000 (10:52 -0700)]
Merge branch 'pb/gitweb'
* pb/gitweb:
gitweb: Support for simple project search form
gitweb: Make the by_tag filter delve in forks as well
gitweb: Support for tag clouds
gitweb: Add support for extending the action bar with custom links
gitweb: Sort the list of forks on the summary page by age
gitweb: Clean-up sorting of project list
Shawn O. Pearce [Thu, 9 Oct 2008 17:19:51 +0000 (10:19 -0700)]
Merge branch 'mw/sendemail'
* mw/sendemail:
bash completion: Add --[no-]validate to "git send-email"
send-email: signedoffcc -> signedoffbycc, but handle both
Docs: send-email: Create logical groupings for man text
Docs: send-email: Create logical groupings for --help text
Docs: send-email: Remove unnecessary config variable description
Docs: send-email: --chain_reply_to -> --[no-]chain-reply-to
send-email: change --no-validate to boolean --[no-]validate
Docs: send-email: Man page option ordering
Docs: send-email usage text much sexier
Docs: send-email's usage text and man page mention same options
Shawn O. Pearce [Thu, 9 Oct 2008 17:18:32 +0000 (10:18 -0700)]
Merge branch 'maint'
* maint:
builtin-apply: fix typo leading to stack corruption
git-stash.sh: fix flawed fix of invalid ref handling (commit da65e7c1)
builtin-merge.c: allocate correct amount of memory
Makefile: do not set NEEDS_LIBICONV for Solaris 8
rebase -i: remove leftover debugging
rebase -i: proper prepare-commit-msg hook argument when squashing
Brandon Casey [Thu, 2 Oct 2008 23:52:11 +0000 (18:52 -0500)]
git-stash.sh: fix flawed fix of invalid ref handling (commit da65e7c1)
The referenced commit tried to fix a flaw in stash's handling of a user
supplied invalid ref. i.e. 'git stash apply fake_ref@{0}' should fail
instead of applying stash@{0}. But, it did so in a naive way by avoiding the
use of the --default option of rev-parse, and instead manually supplied the
default revision if the user supplied an empty command line. This prevented
a common usage scenario of supplying flags on the stash command line (i.e.
non-empty command line) which would be parsed by lower level git commands,
without supplying a specific revision. This should fall back to the default
revision, but now it causes an error. e.g. 'git stash show -p'
The correct fix is to use the --verify option of rev-parse, which fails
properly if an invalid ref is supplied, and still allows falling back to a
default ref when one is not supplied.
Convert stash-drop to use --verify while we're at it, since specifying
multiple revisions for any of these commands is also an error and --verify
makes it so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
But while we're at it, change the allocation to reference the
variable it is allocating memory for to try to prevent a similar
mistake, for example if the type is changed, in the future.
Shawn O. Pearce [Wed, 8 Oct 2008 15:05:43 +0000 (08:05 -0700)]
Merge branch 'maint'
* maint:
Do not use errno when pread() returns 0
git init: --bare/--shared overrides system/global config
git-push.txt: Describe --repo option in more detail
git rm: refresh index before up-to-date check
Fix a few typos in relnotes
Samuel Tardieu [Mon, 6 Oct 2008 17:28:41 +0000 (19:28 +0200)]
Do not use errno when pread() returns 0
If we use pread() while at the end of the file, it will return 0, which is
not an error from the operating system point of view. In this case, errno
has not been set and must not be used.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If core.bare or core.sharedRepository are set in /etc/gitconfig or
~/.gitconfig, then 'git init' will read the values when constructing a
new config file; reading them, however, will override the values
specified on the command line. In the case of --bare, this ends up
causing a segfault, without the repository being properly initialised;
in the case of --shared, the permissions are set according to the
existing config settings, not what was specified on the command line.
This fix saves any specified values for --bare and --shared prior to
reading existing config settings, and restores them after reading but
before writing the new config file. core.bare is ignored in all
situations, while core.sharedRepository will only be used if --shared
is not specified to git init.
Also includes testcases which use a specified global config file
override, demonstrating the former failure scenario.
Signed-off-by: Deskin Miller <deskinm@umich.edu> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Sixt [Tue, 7 Oct 2008 14:26:20 +0000 (16:26 +0200)]
git-push.txt: Describe --repo option in more detail
The --repo option was described in a way that the reader would have to
assume that it is the same as the <repository> parameter. But it actually
servers a purpose, which is now written down.
Furthermore, the --mirror option was missing from the synopsis.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Florian Ragwitz [Sun, 5 Oct 2008 02:35:17 +0000 (19:35 -0700)]
Add git-svn branch to allow branch creation in SVN repositories
[ew: fixed a warning to stderr causing t9108 to fail]
Signed-off-by: Florian Ragwitz <rafl@debian.org> Signed-off-by: Deskin Miller <deskinm@umich.edu> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 6 Oct 2008 15:56:07 +0000 (08:56 -0700)]
Merge branch 'maint'
* maint:
Update release notes for 1.6.0.3
Teach rebase -i to honor pre-rebase hook
docs: describe pre-rebase hook
do not segfault if make_cache_entry failed
make prefix_path() never return NULL
fix bogus "diff --git" header from "diff --no-index"
Fix fetch/clone --quiet when stdout is connected
builtin-blame: Fix blame -C -C with submodules.
bash: remove fetch, push, pull dashed form leftovers
The original git-rebase honored pre-rebase hook so that public branches
can be protected from getting rebased, but rebase --interactive ignored
the hook entirely. This fixes it.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Dmitry Potapov [Sun, 5 Oct 2008 00:40:36 +0000 (04:40 +0400)]
make prefix_path() never return NULL
There are 9 places where prefix_path is called, and only in one of
them the returned pointer was checked to be non-zero and only to
call exit(128) as it is usually done by die(). In other 8 places,
the returned value was not checked and it caused SIGSEGV when a
path outside of the working tree was used. For instance, running
git update-index --add /some/path/outside
caused SIGSEGV.
This patch changes prefix_path() to die if the path is outside of
the repository, so it never returns NULL.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Linus Torvalds [Sun, 5 Oct 2008 19:35:15 +0000 (15:35 -0400)]
fix bogus "diff --git" header from "diff --no-index"
When "git diff --no-index" is given an absolute pathname, it
would generate a diff header with the absolute path
prepended by the prefix, like:
diff --git a/dev/null b/foo
Not only is this nonsensical, and not only does it violate
the description of diffs given in git-diff(1), but it would
produce broken binary diffs. Unlike text diffs, the binary
diffs don't contain the filenames anywhere else, and so "git
apply" relies on this header to figure out the filename.
This patch just refuses to use an invalid name for anything
visible in the diff.
Now, this fixes the "git diff --no-index --binary a
/dev/null" kind of case (and we'll end up using "a" as the
basename), but some other insane cases are impossible to
handle. If you do
git diff --no-index --binary a /bin/echo
you'll still get a patch like
diff --git a/a b/bin/echo
old mode 100644
new mode 100755
index ...
and "git apply" will refuse to apply it for a couple of
reasons, and the diff is simply bogus.
And that, btw, is no longer a bug, I think. It's impossible
to know whethe the user meant for the patch to be a rename
or not. And as such, refusing to apply it because you don't
know what name you should use is probably _exactly_ the
right thing to do!
Original problem reported by Imre Deak. Test script and problem
description by Jeff King.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff King [Sat, 4 Oct 2008 02:13:49 +0000 (22:13 -0400)]
tutorial: update output of git commit
Commit c85db254 changed the format of the message produced
by "git commit" when creating a commit. This patch updates
the example session in the tutorial to the new format.
It also adds in the missing diffstat summary lines, which
should have been added long ago.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff King [Fri, 3 Oct 2008 06:39:36 +0000 (02:39 -0400)]
Makefile: do not set NEEDS_LIBICONV for Solaris 8
This breaks my build on Solaris 8, as there is no separate
libiconv.
The history of this line is somewhat convoluted. In 2fd955c
(in November 2005), NEEDS_LIBICONV was turned on for all
Solaris builds, claiming to "fix an error in Solaris 10 by
setting NEEDS_LIBICONV".
Later, e15f545 (in February of 2006) claimed that "Solaris
9+ don't need iconv", and moved NEEDS_LIBICONV into a
section for Solaris 8.
that he does not set NEEDS_LIBICONV for Solaris 7.
So either one of those commits is totally wrong, or there is
some other magic going on where some Solaris installs need
it and others don't.
Given Brandon's statement and my problems on Solaris 8 with
NEEDS_LIBICONV, I am inclined to think the first commit was
bogus, and that NEEDS_LIBICONV shouldn't be set for Solaris
at all by default. If somebody wants to use iconv and has
installed it manually, they can set it in their config.mak.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Fri, 3 Oct 2008 14:41:25 +0000 (07:41 -0700)]
Merge branch 'pb/gitweb-tagcloud' into pb/gitweb
* pb/gitweb-tagcloud:
gitweb: Support for simple project search form
gitweb: Make the by_tag filter delve in forks as well
gitweb: Support for tag clouds
... (+ many updates from master) ...
Petr Baudis [Fri, 3 Oct 2008 07:29:45 +0000 (09:29 +0200)]
gitweb: Support for simple project search form
This is a trivial patch adding support for searching projects by name
and description, making use of the "infrastructure" provided by the
tag cloud generation.
Signed-off-by: Petr Baudis <petr.baudis@novartis.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Petr Baudis [Thu, 2 Oct 2008 15:13:02 +0000 (17:13 +0200)]
gitweb: Support for tag clouds
The "Content tags" (nothing to do with usual Git tags!) are free-form
strings that are attached to random projects and displayed in the
well-known Web2.0-ish tag cloud above project list.
The feature will make use of HTML::TagCloud if available, but will
still display (less pretty) list of tags in case the module is not
installed.
The tagging itself is not done by gitweb - user-provided external
helper CGI needs to be provided; one example is the tagproj.cgi
of Girocco. This functionality might get integrated to gitweb
in the future.
The tags are stored one-per-file in ctags/ subdirectory. The reason
they are not stored in the project config file is that you usually
want to give anyone (even CGI scripts) permission to create new tags
and they are non-essential information, and thus you would make
the ctags/ subdirectory world-writable.
Signed-off-by: Petr Baudis <petr.baudis@novartis.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
SZEDER Gábor [Fri, 3 Oct 2008 00:08:21 +0000 (02:08 +0200)]
rebase -i: proper prepare-commit-msg hook argument when squashing
One would expect that the prepare-commit-msg hook gets 'squash' as the
second argument when squashing commits with 'rebase -i'. However,
that was not the case, as it got 'merge' instead. This patch fixes
the problem.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Petr Baudis [Thu, 2 Oct 2008 14:36:52 +0000 (16:36 +0200)]
gitweb: Add support for extending the action bar with custom links
This makes it possible to easily extend gitweb with custom functionality,
e.g. git-browser or web-based repository administration system like
the repo.or.cz/Girocco duct tape.
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Brandon Casey [Wed, 1 Oct 2008 19:28:26 +0000 (14:28 -0500)]
xdiff-interface.c: strip newline (and cr) from line before pattern matching
POSIX doth sayeth:
"In the regular expression processing described in IEEE Std 1003.1-2001,
the <newline> is regarded as an ordinary character and both a period and
a non-matching list can match one. ... Those utilities (like grep) that
do not allow <newline>s to match are responsible for eliminating any
<newline> from strings before matching against the RE."
Thus far git has not been removing the trailing newline from strings matched
against regular expression patterns. This has the effect that (quoting
Jonathan del Strother) "... a line containing just 'FUNCNAME' (terminated by
a newline) will be matched by the pattern '^(FUNCNAME.$)' but not
'^(FUNCNAME$)'", and more simply not '^FUNCNAME$'.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
David Aguilar [Thu, 2 Oct 2008 09:11:55 +0000 (02:11 -0700)]
tests: add a testcase for "git submodule sync"
This testcase ensures that upstream changes to submodule properties
can be updated using the sync subcommand. This particular test
changes the submodule URL upstream and uses the sync command to update
an existing checkout.
Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Fri, 3 Oct 2008 01:16:22 +0000 (18:16 -0700)]
Merge branch 'maint'
* maint:
gitweb: Add path_info tests to t/t9500-gitweb-standalone-no-errors.sh
gitweb: Fix two 'uninitialized value' warnings in git_tree()
Solaris: Use OLD_ICONV to avoid compile warnings
gitweb: remove PATH_INFO from $my_url and $my_uri
Nicolas Pitre [Wed, 1 Oct 2008 18:05:20 +0000 (14:05 -0400)]
fix openssl headers conflicting with custom SHA1 implementations
On ARM I have the following compilation errors:
CC fast-import.o
In file included from cache.h:8,
from builtin.h:6,
from fast-import.c:142:
arm/sha1.h:14: error: conflicting types for 'SHA_CTX'
/usr/include/openssl/sha.h:105: error: previous declaration of 'SHA_CTX' was here
arm/sha1.h:16: error: conflicting types for 'SHA1_Init'
/usr/include/openssl/sha.h:115: error: previous declaration of 'SHA1_Init' was here
arm/sha1.h:17: error: conflicting types for 'SHA1_Update'
/usr/include/openssl/sha.h:116: error: previous declaration of 'SHA1_Update' was here
arm/sha1.h:18: error: conflicting types for 'SHA1_Final'
/usr/include/openssl/sha.h:117: error: previous declaration of 'SHA1_Final' was here
make: *** [fast-import.o] Error 1
This is because openssl header files are always included in
git-compat-util.h since commit 684ec6c63c whenever NO_OPENSSL is not
set, which somehow brings in <openssl/sha1.h> clashing with the custom
ARM version. Compilation of git is probably broken on PPC too for the
same reason.
Turns out that the only file requiring openssl/ssl.h and openssl/err.h
is imap-send.c. But only moving those problematic includes there
doesn't solve the issue as it also includes cache.h which brings in the
conflicting local SHA1 header file.
As suggested by Jeff King, the best solution is to rename our references
to SHA1 functions and structure to something git specific, and define those
according to the implementation used.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jakub Narebski [Thu, 2 Oct 2008 14:52:20 +0000 (16:52 +0200)]
gitweb: Add path_info tests to t/t9500-gitweb-standalone-no-errors.sh
Note that those tests only check that there are no errors nor
warnings from Perl; they do not check for example if gitweb doesn't
use ARRAY(0x8e3cc20) instead of correct value in links, etc.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Acked-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jakub Narebski [Thu, 2 Oct 2008 14:50:04 +0000 (16:50 +0200)]
gitweb: Fix two 'uninitialized value' warnings in git_tree()
If we did try to access nonexistent directory or file, which means
that git_get_hash_by_path() returns `undef`, uninitialized $hash
variable was passed to 'open' call. Now we fail early with "404 Not
Found - No such tree" error. (If we try to access something which
does not resolve to tree-ish, for example a file / 'blob' object, the
error will be caught later, as "404 Not Found - Reading tree failed"
error).
If we tried to use 'tree' action without $file_name ('f' parameter)
set, which means either tree given by hash or a top tree (and we
currently cannot distinguish between those two cases), we cannot print
path breadcrumbs with git_print_page_path(). Fix this by moving call
to git_print_page_path() inside conditional.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Acked-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Petr Baudis [Thu, 2 Oct 2008 14:25:05 +0000 (16:25 +0200)]
gitweb: Identify all summary metadata table rows
In the metadata table of the summary page, all rows have their
id (or class in case of URL) set now. This for example lets sites
easily disable fields they do not want to show in their custom
stylesheet (e.g. they are overly technical or irrelevant for the site).
Signed-off-by: Petr Baudis <petr.baudis@novartis.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Giuseppe Bilotta [Mon, 29 Sep 2008 13:07:42 +0000 (15:07 +0200)]
gitweb: remove PATH_INFO from $my_url and $my_uri
This patch fixes PATH_INFO handling by removing the relevant part from
$my_url and $my_uri, thus making it unnecessary to specify them by hand
in the gitweb configuration.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Acked-by: Jakub Narebski <jnareb@gmail.com> Acked-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Petr Baudis [Wed, 1 Oct 2008 20:13:02 +0000 (22:13 +0200)]
config.c: Tolerate UTF8 BOM at the beginning of config file
Unfortunately, the abomination of Windows Notepad likes to scatted
non-sensical UTF8 BOM marks across text files it edits. This is
especially troublesome when editing the Git configuration file,
and it does not appear to be particularly harmful to teach Git
to deal with this poo in the configfile.
Signed-off-by: Petr Baudis <petr.baudis@novartis.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Petr Baudis [Wed, 1 Oct 2008 20:11:54 +0000 (22:11 +0200)]
gitweb: Quote non-displayable characters in hex, not octal
For the last 30 years, the mankind uses the octal representation of
characters only in rare cases and most character codes are hardly
recognizable in octal. In contrast, many programmers still know
hexadecimal well and that is also the representation of choice e.g.
for Unicode codepoints.
Signed-off-by: Petr Baudis <petr.baudis@novartis.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff King [Wed, 1 Oct 2008 22:31:25 +0000 (18:31 -0400)]
reformat informational commit message
When committing, we print a message like:
Created [DETACHED commit] <hash> (<subject>) on <branch>
The most useful bit of information there (besides the
detached status, if it is present) is which branch you made
the commit on. However, it is sometimes hard to see because
the subject dominates the line.
Instead, let's put the most useful information (detached
status and commit branch) on the far left, with the subject
(which is least likely to be interesting) on the far right.
We'll use brackets to offset the branch name so the line is
not mistaken for an error line of the form "program: some
sort of error". E.g.,:
[jk/bikeshed] created bd8098f: "reformat informational commit message"
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
projects / thirdparty / git.git / log
