Michael Haggerty [Thu, 15 Sep 2011 21:10:34 +0000 (23:10 +0200)]
resolve_ref(): turn buffer into a proper string as soon as possible
Immediately strip off trailing spaces and null-terminate the string
holding the contents of the reference file; this allows the use of
string functions and avoids the need to keep separate track of the
string's length. (get_sha1_hex() fails automatically if the string is
too short.)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Haggerty [Thu, 15 Sep 2011 21:10:31 +0000 (23:10 +0200)]
resolve_ref(): explicitly fail if a symlink is not readable
Previously the failure came later, after a few steps in which the
length was treated like the actual length of a string. Even though
the old code gave the same answers, it was somewhat misleading.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Haggerty [Thu, 15 Sep 2011 21:10:30 +0000 (23:10 +0200)]
Change check_refname_format() to reject unnormalized refnames
Since much of the infrastructure does not work correctly with
unnormalized refnames, change check_refname_format() to reject them.
Similarly, change "git check-ref-format" to reject unnormalized
refnames by default. But add an option --normalize, which causes "git
check-ref-format" to normalize the refname before checking its format,
and print the normalized refname. This is exactly the behavior of the
old --print option, which is retained but deprecated.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Haggerty [Thu, 15 Sep 2011 21:10:25 +0000 (23:10 +0200)]
Change check_ref_format() to take a flags argument
Change check_ref_format() to take a flags argument that indicates what
is acceptable in the reference name (analogous to "git
check-ref-format"'s "--allow-onelevel" and "--refspec-pattern"). This
is more convenient for callers and also fixes a failure in the test
suite (and likely elsewhere in the code) by enabling "onelevel" and
"refspec-pattern" to be allowed independently of each other.
Also rename check_ref_format() to check_refname_format() to make it
obvious that it deals with refnames rather than references themselves.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Haggerty [Thu, 15 Sep 2011 21:10:24 +0000 (23:10 +0200)]
Change bad_ref_char() to return a boolean value
Previously most bad characters were indicated by returning 1, but "*"
was special-cased to return 2 instead of 1. One caller examined the
return value to see whether the special case occurred.
But it is easier (to document and understand) for bad_ref_char()
simply to return a boolean value, treating "*" like any other bad
character. Special-case the handling of "*" (which only occurs in
very specific circumstances) at the caller. The resulting calling
code thereby also becomes more transparent.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Haggerty [Thu, 15 Sep 2011 21:10:23 +0000 (23:10 +0200)]
git check-ref-format: add options --allow-onelevel and --refspec-pattern
Also add tests of the new options. (Actually, one big reason to add
the new options is to make it easy to test check_ref_format(), though
the options should also be useful to other scripts.)
Interpret the result of check_ref_format() based on which types of
refnames are allowed. However, because check_ref_format() can only
return a single value, one test case is still broken. Specifically,
the case "git check-ref-format --onelevel '*'" incorrectly succeeds
because check_ref_format() returns CHECK_REF_FORMAT_ONELEVEL for this
refname even though the refname is also CHECK_REF_FORMAT_WILDCARD.
The type of check that leads to this failure is used elsewhere in
"real" code and could lead to bugs; it will be fixed over the next few
commits.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Haggerty [Fri, 23 Sep 2011 13:38:36 +0000 (15:38 +0200)]
get_sha1_hex(): do not read past a NUL character
Previously, get_sha1_hex() would read one character past the end of a
null-terminated string whose strlen was an even number less than 40.
Although the function correctly returned -1 in these cases, the extra
memory access might have been to uninitialized (or even, conceivably,
unallocated) memory.
Add a check to avoid reading past the end of a string.
This problem was discovered by Thomas Rast <trast@student.ethz.ch>
using valgrind.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 7 Sep 2011 18:18:18 +0000 (11:18 -0700)]
Minor update to how-to maintain git
A few more parts of this document is stale that needs updating
to reflect the reality, but I do not regularly rebase topics that
are only in "pu" anymore, which may be noteworthy for a commit.
Adding a new command line option to receive-pack and feed it from
send-pack is not an acceptable way to add features, as there is no
guarantee that your updated send-pack will be talking to updated
receive-pack. New features need to be added via the capability mechanism
negotiated over the protocol.
Junio C Hamano [Fri, 2 Sep 2011 20:18:22 +0000 (13:18 -0700)]
Merge branch 'tr/maint-format-patch-empty-output'
* tr/maint-format-patch-empty-output:
Document negated forms of format-patch --to --cc --add-headers
t4014: "no-add-headers" is actually called "no-add-header"
t4014: invoke format-patch with --stdout where intended
t4014: check for empty files from git format-patch --stdout
Junio C Hamano [Fri, 2 Sep 2011 17:00:38 +0000 (10:00 -0700)]
Merge branch 'fk/use-kwset-pickaxe-grep-f'
* fk/use-kwset-pickaxe-grep-f:
obstack: Fix portability issues
Use kwset in grep
Use kwset in pickaxe
Adapt the kwset code to Git
Add string search routines from GNU grep
Add obstack.[ch] from EGLIBC 2.10
Junio C Hamano [Fri, 2 Sep 2011 17:00:18 +0000 (10:00 -0700)]
Merge branch 'en/merge-recursive-2'
* en/merge-recursive-2: (57 commits)
merge-recursive: Don't re-sort a list whose order we depend upon
merge-recursive: Fix virtual merge base for rename/rename(1to2)/add-dest
t6036: criss-cross + rename/rename(1to2)/add-dest + simple modify
merge-recursive: Avoid unnecessary file rewrites
t6022: Additional tests checking for unnecessary updates of files
merge-recursive: Fix spurious 'refusing to lose untracked file...' messages
t6022: Add testcase for spurious "refusing to lose untracked" messages
t3030: fix accidental success in symlink rename
merge-recursive: Fix working copy handling for rename/rename/add/add
merge-recursive: add handling for rename/rename/add-dest/add-dest
merge-recursive: Have conflict_rename_delete reuse modify/delete code
merge-recursive: Make modify/delete handling code reusable
merge-recursive: Consider modifications in rename/rename(2to1) conflicts
merge-recursive: Create function for merging with branchname:file markers
merge-recursive: Record more data needed for merging with dual renames
merge-recursive: Defer rename/rename(2to1) handling until process_entry
merge-recursive: Small cleanups for conflict_rename_rename_1to2
merge-recursive: Fix rename/rename(1to2) resolution for virtual merge base
merge-recursive: Introduce a merge_file convenience function
merge-recursive: Fix modify/delete resolution in the recursive case
...
Bryan Jacobs [Wed, 31 Aug 2011 16:48:39 +0000 (12:48 -0400)]
git-svn: Teach dcommit --mergeinfo to handle multiple lines
"svn dcommit --mergeinfo" replaces the svn:mergeinfo property in an
upstream SVN repository with the given text. The svn:mergeinfo
property may contain commits originating on multiple branches,
separated by newlines.
Cause space characters in the mergeinfo to be replaced by newlines,
allowing a user to create history representing multiple branches being
merged into one.
Update the corresponding documentation and add a test for the new
functionality.
Signed-off-by: Bryan Jacobs <bjacobs@woti.com> Acked-by: Sam Vilain <sam@vilain.net> Acked-by: Eric Wong <normalperson@yhbt.net>
Ray Chen [Wed, 20 Jul 2011 22:37:26 +0000 (18:37 -0400)]
git-svn: New flag to emulate empty directories
Adds a --preserve-empty-dirs flag to the clone operation that will detect
empty directories in the remote Subversion repository and create placeholder
files in the corresponding local Git directories. This allows "empty"
directories to exist in the history of a Git repository.
Also adds the --placeholder-file flag to control the name of any placeholder
files created. Default value is ".gitignore".
Signed-off-by: Ray Chen <rchen@cs.umd.edu> Acked-by: Eric Wong <normalperson@yhbt.net>
Tay Ray Chuan [Wed, 31 Aug 2011 04:48:46 +0000 (12:48 +0800)]
xdiff/xprepare: initialise xdlclassifier_t cf in xdl_prepare_env()
Ensure that the xdl_free_classifier() call on xdlclassifier_t cf is safe
even if xdl_init_classifier() isn't called. This may occur in the case
where diff is run with --histogram and a call to, say, xdl_prepare_ctx()
fails.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Mon, 29 Aug 2011 20:09:25 +0000 (13:09 -0700)]
t6030: use $SHELL_PATH to invoke user's preferred shell instead of bare sh
Some platforms (IRIX, Solaris) provide an ancient /bin/sh which chokes on
modern shell syntax like $(). SHELL_PATH is provided to allow the user to
specify a working sh, let's use it here.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Tue, 30 Aug 2011 00:06:07 +0000 (02:06 +0200)]
t3903: fix misquoted rev-parse invocation
!"git ..." hopefully always succeeds because "git ..." is not the name
of any executable. However, that's not what was intended. Unquote
it, and while we're at it, also replace ! with test_must_fail since it
is a call to git.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Jon Seymour <jon.seymour@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Tue, 30 Aug 2011 09:21:07 +0000 (11:21 +0200)]
Documentation: clarify effects of -- <path> arguments
'git log -- <path>' does not "show commits that affect the specified
paths" in a literal sense unless --full-history is given (for example,
a file that only existed on a side branch will turn up no commits at
all!).
Reword it to specify the actual intent of the filtering, and point to
the "History Simplification" section.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Mon, 29 Aug 2011 21:16:12 +0000 (23:16 +0200)]
strbuf_grow(): maintain nul-termination even for new buffer
In the case where sb is initialized to the slopbuf (through
strbuf_init(sb,0) or STRBUF_INIT), strbuf_grow() loses the terminating
nul: it grows the buffer, but gives ALLOC_GROW a NULL source to avoid
it being freed. So ALLOC_GROW does not copy anything to the new
memory area.
This subtly broke the call to strbuf_getline in read_next_command()
[fast-import.c:1855], which goes
strbuf_detach(&command_buf, NULL); # command_buf is now = STRBUF_INIT
stdin_eof = strbuf_getline(&command_buf, stdin, '\n');
if (stdin_eof)
return EOF;
In strbuf_getwholeline, this did
strbuf_grow(sb, 0); # loses nul-termination
if (feof(fp))
return EOF;
strbuf_reset(sb); # this would have nul-terminated!
Valgrind found this because fast-import subsequently uses prefixcmp()
on command_buf.buf, which after the EOF exit contains only
uninitialized memory.
Arguably strbuf_getwholeline is also broken, in that it touches the
buffer before deciding whether to do any work. However, it seems more
futureproof to not let the strbuf API lose the nul-termination by its
own fault.
So make sure that strbuf_grow() puts in a nul even if it has nowhere
to copy it from. This makes strbuf_grow(sb, 0) a semantic no-op as
far as readers of the buffer are concerned.
Also remove the nul-termination added by strbuf_init, which is made
redudant.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Mon, 29 Aug 2011 20:10:49 +0000 (22:10 +0200)]
Document negated forms of format-patch --to --cc --add-headers
The negated forms introduced in c426003 (format-patch: add --no-cc,
--no-to, and --no-add-headers, 2010-03-07) were not documented
anywhere. Add them to the descriptions of the positive forms.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Mon, 29 Aug 2011 20:10:48 +0000 (22:10 +0200)]
t4014: "no-add-headers" is actually called "no-add-header"
Since c426003 (format-patch: add --no-cc, --no-to, and
--no-add-headers, 2010-03-07) the tests have checked for an option
called --no-add-headers introduced by letting the user negate
--add-header.
However, the parseopt machinery does not automatically pluralize
anything, so it is in fact called --no-add-header.
Since the option never worked, is not documented anywhere, and
implementing an actual --no-add-headers would lead to silly code
complications, we just adapt the test to the code.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Mon, 29 Aug 2011 20:10:47 +0000 (22:10 +0200)]
t4014: invoke format-patch with --stdout where intended
The test wrote something along the lines of 0001-foo.patch to output,
which of course never contained a signature. Luckily the tested
behaviour is actually present.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Mon, 29 Aug 2011 20:10:46 +0000 (22:10 +0200)]
t4014: check for empty files from git format-patch --stdout
Most kinds of failure in 'git format-patch --stdout >output' will
result in an empty 'output'. This slips past checks that only verify
absence of output, such as the '! grep ...' that are quite prevalent
in t4014.
Introduce a helper check_patch() that checks that at least From, Date
and Subject are present, thus making sure it looks vaguely like a
patch (or cover letter) email. Then insert calls to it in all tests
that do have positive checks for content.
This makes two of the tests fail. Mark them as such; they'll be
fixed in a moment.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Mon, 29 Aug 2011 20:06:04 +0000 (22:06 +0200)]
Use memmove in ident_to_git
convert_to_git sets src=dst->buf if any of the preceding conversions
actually did any work. Thus in ident_to_git we have to use memmove
instead of memcpy as far as src->dst copying is concerned.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Giuseppe Bilotta [Mon, 29 Aug 2011 15:22:06 +0000 (17:22 +0200)]
am: format is in $patch_format, not parse_patch
The error message given when the patch format was not recognized was
wrong, since the variable checked was $parse_patch rather than
$patch_format. Fix by checking the non-emptyness of the correct
variable.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
is too long ($x38 and $x40 represent 38 and 40 copies of [0-9a-f]) for
grep to handle. In order to still be able to match this, use the sed
invocation to replace what we're looking for with a token.
Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 25 Aug 2011 18:29:57 +0000 (11:29 -0700)]
Documentation: clarify "git clean -e <pattern>"
The current explanation of -e can be misread as allowing the user to say
I know 'git clean -XYZ' (substitute -XYZ with any option and/or
parameter) will remove paths A, B, and C, and I want them all removed
except for paths matching this pattern by adding '-e C' to the same
command line, i.e. 'git clean -e C -XYZ'.
But that is not what this option does. It augments the set of ignore rules
from the command line, just like the same "-e <pattern>" argument does
with the "ls-files" command (the user could probably pass "-e \!C" to tell
the command to clean everything the command would normally remove, except
for C). Also error out when both -x and -e are given with an explanation of
what -e means---it is a symptom of misunderstanding what -e does.
It also fixes small style nit in the parameter to add_exclude() call. The
current code only works because EXC_CMDL happens to be defined as 0.
Fredrik Kuivinen [Sun, 28 Aug 2011 20:08:46 +0000 (22:08 +0200)]
obstack: Fix portability issues
i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1, SunOS 5.10, and possibly
others do not have exit.h and exitfail.h. Remove the use of these in
obstack.c.
The __block variable was renamed to block to avoid a gcc error:
compat/obstack.h:190: error: __block attribute can be specified on variables only
Initial-patch-by: David Aguilar <davvid@gmail.com> Reported-by: Brian Gernhardt <brian@gernhardtsoftware.com> Signed-off-by: Fredrik Kuivinen <frekui@gmail.com> Acked-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 29 Aug 2011 04:22:58 +0000 (21:22 -0700)]
Merge branch 'nd/decorate-grafts'
* nd/decorate-grafts:
log: Do not decorate replacements with --no-replace-objects
log: decorate "replaced" on to replaced commits
log: decorate grafted commits with "grafted"
Move write_shallow_commits to fetch-pack.c
Add for_each_commit_graft() to iterate all grafts
decoration: do not mis-decorate refs with same prefix
Junio C Hamano [Mon, 29 Aug 2011 04:19:16 +0000 (21:19 -0700)]
Merge branch 'jk/color-and-pager'
* jk/color-and-pager:
want_color: automatically fallback to color.ui
diff: don't load color config in plumbing
config: refactor get_colorbool function
color: delay auto-color decision until point of use
git_config_colorbool: refactor stdout_is_tty handling
diff: refactor COLOR_DIFF from a flag into an int
setup_pager: set GIT_PAGER_IN_USE
t7006: use test_config helpers
test-lib: add helper functions for config
t7006: modernize calls to unset
Junio C Hamano [Mon, 29 Aug 2011 04:19:12 +0000 (21:19 -0700)]
Merge branch 'mh/attr'
* mh/attr:
Unroll the loop over passes
Change while loop into for loop
Determine the start of the states outside of the pass loop
Change parse_attr() to take a pointer to struct attr_state
Increment num_attr in parse_attr_line(), not parse_attr()
Document struct match_attr
Add a file comment
Junio C Hamano [Mon, 29 Aug 2011 04:18:47 +0000 (21:18 -0700)]
Merge branch 'di/fast-import-blob-tweak'
* di/fast-import-blob-tweak:
fast-import: treat cat-blob as a delta base hint for next blob
fast-import: count and report # of calls to diff_delta in stats
Junio C Hamano [Mon, 29 Aug 2011 04:18:47 +0000 (21:18 -0700)]
Merge branch 'di/fast-import-ident'
* di/fast-import-ident:
fsck: improve committer/author check
fsck: add a few committer name tests
fast-import: check committer name more strictly
fast-import: don't fail on omitted committer name
fast-import: add input format tests
Junio C Hamano [Mon, 29 Aug 2011 04:15:34 +0000 (21:15 -0700)]
Merge branch 'va/p4-branch-import'
* va/p4-branch-import:
git-p4: Add simple test case for branch import
git-p4: Allow branch definition with git config
git-p4: Allow filtering Perforce branches by user
git-p4: Correct branch base depot path detection
git-p4: Process detectCopiesHarder with --bool
git-p4: Add test case for copy detection
git-p4: Add test case for rename detection
git-p4: Add description of rename/copy detection options
git-p4: Allow setting rename/copy detection threshold
Michael J Gruber [Thu, 25 Aug 2011 15:09:30 +0000 (17:09 +0200)]
log: Do not decorate replacements with --no-replace-objects
5267d29 (log: decorate "replaced" on to replaced commits, 2011-08-19)
introduced textual decorations for replaced commits, based on the
detection of refs/replace.
Make it so that additionally the use of --no-replace-objects is
detected: I.e. replaced commits are only decorated as replaced when they
are actually replaced.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 25 Aug 2011 23:00:43 +0000 (16:00 -0700)]
Merge branch 'da/difftool-mergtool-refactor'
* da/difftool-mergtool-refactor:
mergetools/meld: Use '--output' when available
mergetool--lib: Refactor tools into separate files
mergetool--lib: Make style consistent with git
difftool--helper: Make style consistent with git
Junio C Hamano [Thu, 25 Aug 2011 23:00:16 +0000 (16:00 -0700)]
Merge branch 'js/i18n-scripts'
* js/i18n-scripts:
submodule: take advantage of gettextln and eval_gettextln.
stash: take advantage of eval_gettextln
pull: take advantage of eval_gettextln
git-am: take advantage of gettextln and eval_gettextln.
gettext: add gettextln, eval_gettextln to encode common idiom
Michael Haggerty [Thu, 25 Aug 2011 19:19:24 +0000 (21:19 +0200)]
check-ref-format --print: Normalize refnames that start with slashes
When asked if "refs///heads/master" is valid, check-ref-format says "Yes,
it is well formed", and when asked to print canonical form, it shows
"refs/heads/master". This is so that it can be tucked after "$GIT_DIR/"
to form a valid pathname for a loose ref, and we normalize a pathname like
"$GIT_DIR/refs///heads/master" to de-dup the slashes in it.
Similarly, when asked if "/refs/heads/master" is valid, check-ref-format
says "Yes, it is Ok", but the leading slash is not removed when printing,
leading to "$GIT_DIR//refs/heads/master".
Fix it to make sure such leading slashes are removed. Add tests that such
refnames are accepted and normalized correctly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber [Thu, 25 Aug 2011 10:26:37 +0000 (12:26 +0200)]
git-notes.txt: clarify -C vs. copy and -F
The current description of '-C' together with the analogy to 'git commit
-C' can lead to the wrong conclusion that '-C' copies notes between
objects. Make this clearer by rewording and pointing to 'copy'.
The example for attaching binary notes with 'git hash-object' followed
by 'git notes add -C' immediately raises the question: "Why not use 'git
notes add -F'?". Answer it (the latter is not binary-safe).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Acked-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
